Asobo\Common\Subtemplates\LandingGear_Subtemplates.xml

Templates

• ASOBO_LANDING_GEAR_Gear_SubTemplate

  Definition from XML
  <Template Name="ASOBO_LANDING_GEAR_Gear_SubTemplate"> <Parameters Type="Default"> <ANIM_NAME>LANDING_GEAR_Lever_Gear</ANIM_NAME> <PART_ID>LANDING_GEAR_Lever_Gear</PART_ID> <NODE_ID>LANDING_GEAR_Lever_Gear</NODE_ID> <LIGHT_NODE_ID>LANDING_GEAR_Lever_GearLight</LIGHT_NODE_ID> <ANIM_LAG>400</ANIM_LAG> <DRAG_SCALAR>10</DRAG_SCALAR> <TOOLTIP_LANDING_GEAR_TITLE>@TT_Package.LANDING_GEAR_LEVER_GEAR_TITLE</TOOLTIP_LANDING_GEAR_TITLE> <WWISE_EVENT>gear_lever</WWISE_EVENT> <WWISE_EVENT_1>gear_lever_on</WWISE_EVENT_1> <WWISE_EVENT_2>gear_lever_off</WWISE_EVENT_2> <ALWAYS_USE_ANIM_LAG>True</ALWAYS_USE_ANIM_LAG> </Parameters> <Parameters Type="Override"> <TOOLTIP_TITLE>#TOOLTIP_LANDING_GEAR_TITLE#</TOOLTIP_TITLE> <TOOLTIP_ENTRY_0>LANDING_GEAR_Gear</TOOLTIP_ENTRY_0> <UP_CODE>(&gt;B:LANDING_GEAR_Gear_Inc)</UP_CODE> <DOWN_CODE>(&gt;B:LANDING_GEAR_Gear_Dec)</DOWN_CODE> </Parameters> <Parameters Type="Override"> <Condition Check="NO_GEARUP_ON_GROUND"> <True> <UP_CODE>(A:SIM ON GROUND, Bool) ! if{ #UP_CODE# }</UP_CODE> </True> </Condition> </Parameters> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <UseInputEvent ID="LANDING_GEAR"> <GEAR_ID>1</GEAR_ID> </UseInputEvent> <UseTemplate Name="ASOBO_GT_Lever_DraggingYAxis_Code"> <ANIM_CODE>(B:LANDING_GEAR_Gear) 100 *</ANIM_CODE> </UseTemplate> </Component> <Condition Check="EMISSIVE_CODE"> <Component ID="#LIGHT_NODE_ID#" Node="#LIGHT_NODE_ID#"> <UseTemplate Name="ASOBO_GT_Emissive_Gauge"> <PART_ID>#LIGHT_NODE_ID#</PART_ID> </UseTemplate> </Component> </Condition> </Template>

  Parameters initialization:

  • Default

    Parameters set:

    • ANIM_NAME
    • PART_ID
    • NODE_ID
    • LIGHT_NODE_ID
    • ANIM_LAG
    • DRAG_SCALAR
    • TOOLTIP_LANDING_GEAR_TITLE
    • WWISE_EVENT
    • WWISE_EVENT_1
    • WWISE_EVENT_2
    • ALWAYS_USE_ANIM_LAG
  • Override

    Parameters set:

    • TOOLTIP_TITLE (using TOOLTIP_LANDING_GEAR_TITLE)
    • TOOLTIP_ENTRY_0
    • UP_CODE
    • DOWN_CODE
  • Override

    Condition: Check(NO_GEARUP_ON_GROUND)

    • Case: True

      Parameters set:

      • UP_CODE (using UP_CODE)

  Parameters read:

  • NODE_ID

  Components:

  • #NODE_ID# (Node: #NODE_ID#)

    Parameters set:

    • GEAR_ID

    Templates used:

    • ASOBO_GT_Lever_DraggingYAxis_Code

      Parameters set:

      • ANIM_CODE

  Condition: Check(EMISSIVE_CODE)

  • Case: True

    Parameters read:

    • LIGHT_NODE_ID

    Components:

    • #LIGHT_NODE_ID# (Node: #LIGHT_NODE_ID#)

      Templates used:

      • ASOBO_GT_Emissive_Gauge

        Parameters set:

        • PART_ID (using LIGHT_NODE_ID)
  [Go back to top] [Go back to index]

• ASOBO_LANDING_GEAR_Floater_Template

  Definition from XML
  <Template Name="ASOBO_LANDING_GEAR_Floater_Template"> <Parameters Type="Default"> <ANIM_NAME>LANDING_GEAR_Lever_Floater</ANIM_NAME> <PART_ID>LANDING_GEAR_Lever_Floater</PART_ID> <NODE_ID>LANDING_GEAR_Lever_Floater</NODE_ID> <ANIM_LAG>400</ANIM_LAG> <DRAG_SCALAR>10</DRAG_SCALAR> <TOOLTIP_FLOATER_TITLE>@TT_Package.LANDING_GEAR_LEVER_FLOATER_TITLE</TOOLTIP_FLOATER_TITLE> <TOOLTIP_TITLE_IS_DYNAMIC>True</TOOLTIP_TITLE_IS_DYNAMIC> <ALWAYS_USE_ANIM_LAG>True</ALWAYS_USE_ANIM_LAG> </Parameters> <Parameters Type="Override"> <TOOLTIP_TITLE>#TOOLTIP_FLOATER_TITLE#</TOOLTIP_TITLE> <TOOLTIP_ENTRY_0>LANDING_GEAR_Floater</TOOLTIP_ENTRY_0> <UP_CODE>(&gt;B:LANDING_GEAR_Floater_Inc)</UP_CODE> <DOWN_CODE>(&gt;B:LANDING_GEAR_Floater_Dec)</DOWN_CODE> </Parameters> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <UseInputEvent ID="LANDING_GEAR"> <FLOATER_ID>1</FLOATER_ID> </UseInputEvent> <UseTemplate Name="ASOBO_GT_Lever_DraggingYAxis_Code"> <ANIM_CODE>(B:LANDING_GEAR_Floater) 100 *</ANIM_CODE> </UseTemplate> </Component> </Template>

  Parameters initialization:

  • Default

    Parameters set:

    • ANIM_NAME
    • PART_ID
    • NODE_ID
    • ANIM_LAG
    • DRAG_SCALAR
    • TOOLTIP_FLOATER_TITLE
    • TOOLTIP_TITLE_IS_DYNAMIC
    • ALWAYS_USE_ANIM_LAG
  • Override

    Parameters set:

    • TOOLTIP_TITLE (using TOOLTIP_FLOATER_TITLE)
    • TOOLTIP_ENTRY_0
    • UP_CODE
    • DOWN_CODE

  Parameters read:

  • NODE_ID

  Components:

  • #NODE_ID# (Node: #NODE_ID#)

    Parameters set:

    • FLOATER_ID

    Templates used:

    • ASOBO_GT_Lever_DraggingYAxis_Code

      Parameters set:

      • ANIM_CODE
  [Go back to top] [Go back to index]

• ASOBO_LANDING_GEAR_Light_SubTemplate

  Definition from XML
  <Template Name="ASOBO_LANDING_GEAR_Light_SubTemplate"> <Parameters Type="Default"> <NODE_ID>LANDING_GEAR_Light_#ID#</NODE_ID> <SIMVAR>GEAR POSITION:#GEAR_ID#</SIMVAR> <CHECKED_PERCENT_VALUE>100</CHECKED_PERCENT_VALUE> <PART_ID>LANDING_GEAR_Light</PART_ID> <Condition Valid="INVERT_CONDITION"> <True> <Condition NotEmpty="CUSTOM_RANGE"> <True> <TEST>rng !</TEST> </True> <False> <TEST>!=</TEST> </False> </Condition> </True> <False> <Condition NotEmpty="CUSTOM_RANGE"> <True> <TEST>rng</TEST> </True> <False> <TEST>==</TEST> </False> </Condition> </False> </Condition> <Condition Check="POTENTIOMETER"> <True> <POTENTIOMETER_MOD>(A:LIGHT POTENTIOMETER:#POTENTIOMETER#, Percent over 100) *</POTENTIOMETER_MOD> </True> <False> <POTENTIOMETER_MOD/> </False> </Condition> </Parameters> <Parameters Type="Override"> <Condition NotEmpty="SHOULD_BE_ON_TEST"> <False> <Condition NotEmpty="CUSTOM_RANGE"> <True> <SHOULD_BE_ON_TEST>#CUSTOM_RANGE# (A:#SIMVAR#, Percent) #TEST#</SHOULD_BE_ON_TEST> </True> <False> <SHOULD_BE_ON_TEST>(A:#SIMVAR#, Percent) #CHECKED_PERCENT_VALUE# #TEST#</SHOULD_BE_ON_TEST> </False> </Condition> </False> </Condition> </Parameters> <Parameters Type="Override"> <Condition Valid="CHECK_LEVER"> <True> <SHOULD_BE_ON_TEST>#SHOULD_BE_ON_TEST# (A:GEAR HANDLE POSITION, bool) and</SHOULD_BE_ON_TEST> </True> </Condition> </Parameters> <Condition Check="AIRBUS_TYPE"> <True> <UseTemplate Name="ASOBO_GT_Push_Button_Airliner"> <DUMMY_BUTTON>True</DUMMY_BUTTON> <SEQ1_EMISSIVE_CODE> (A:#SIMVAR#, Percent) (O:LastFramePosition) != (A:#SIMVAR#, Percent) (&gt;O:LastFramePosition) </SEQ1_EMISSIVE_CODE> <SEQ2_EMISSIVE_CODE>#SHOULD_BE_ON_TEST#</SEQ2_EMISSIVE_CODE> </UseTemplate> </True> <False> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <UseTemplate Name="ASOBO_GT_Emissive_Gauge"> <EMISSIVE_CODE>#SHOULD_BE_ON_TEST# #POTENTIOMETER_MOD#</EMISSIVE_CODE> </UseTemplate> </Component> </False> </Condition> </Template>

  Parameters initialization:

  • Default

    Parameters set:

    • NODE_ID (using ID)
    • SIMVAR (using GEAR_ID)
    • CHECKED_PERCENT_VALUE
    • PART_ID

    Condition: Valid(INVERT_CONDITION)

    • Case: True

      Condition: NotEmpty(CUSTOM_RANGE)

      • Case: True

        Parameters set:

        • TEST
      • Case: False

        Parameters set:

        • TEST
    • Case: False

      Condition: NotEmpty(CUSTOM_RANGE)

      • Case: True

        Parameters set:

        • TEST
      • Case: False

        Parameters set:

        • TEST

    Condition: Check(POTENTIOMETER)

    • Case: True

      Parameters set:

      • POTENTIOMETER_MOD (using POTENTIOMETER)
    • Case: False

      Parameters set:

      • POTENTIOMETER_MOD
  • Override

    Condition: NotEmpty(SHOULD_BE_ON_TEST)

    • Case: False

      Condition: NotEmpty(CUSTOM_RANGE)

      • Case: True

        Parameters set:

        • SHOULD_BE_ON_TEST (using CUSTOM_RANGE, SIMVAR, TEST)
      • Case: False

        Parameters set:

        • SHOULD_BE_ON_TEST (using SIMVAR, CHECKED_PERCENT_VALUE, TEST)
  • Override

    Condition: Valid(CHECK_LEVER)

    • Case: True

      Parameters set:

      • SHOULD_BE_ON_TEST (using SHOULD_BE_ON_TEST)

  Condition: Check(AIRBUS_TYPE)

  • Case: True

    Templates used:

    • ASOBO_GT_Push_Button_Airliner

      Parameters set:

      • DUMMY_BUTTON
      • SEQ1_EMISSIVE_CODE (using SIMVAR)
      • SEQ2_EMISSIVE_CODE (using SHOULD_BE_ON_TEST)
  • Case: False

    Parameters read:

    • NODE_ID

    Components:

    • #NODE_ID# (Node: #NODE_ID#)

      Templates used:

      • ASOBO_GT_Emissive_Gauge

        Parameters set:

        • EMISSIVE_CODE (using SHOULD_BE_ON_TEST, POTENTIOMETER_MOD)
  [Go back to top] [Go back to index]

• ASOBO_LANDING_GEAR_ParkingBrake_Template

  Definition from XML
  <Template Name="ASOBO_LANDING_GEAR_ParkingBrake_Template"> <Parameters Type="Default"> <Condition> <Test> <Greater> <Value>ANIM_DELAY</Value> <Number>0</Number> </Greater> </Test> <True> <HAS_ANIM_DELAY>True</HAS_ANIM_DELAY> </True> <False> <HAS_ANIM_DELAY>False</HAS_ANIM_DELAY> <ANIM_DELAY>0</ANIM_DELAY> </False> </Condition> <INPUTEVENT_VAR_TYPE>L</INPUTEVENT_VAR_TYPE> <INPUTEVENT_VAR_NAME>ParkingBrake_Position</INPUTEVENT_VAR_NAME> </Parameters> <Parameters Type="Default"> <ANIM_NAME>LANDING_GEAR_#INTERACTION_TYPE#_ParkingBrake</ANIM_NAME> <NODE_ID>LANDING_GEAR_#INTERACTION_TYPE#_ParkingBrake</NODE_ID> <PART_ID>LANDING_GEAR_#INTERACTION_TYPE#_ParkingBrake</PART_ID> <MOUSEFLAGS>LeftSingle+WheelUp+WheelDown</MOUSEFLAGS> <LEFT_SINGLE_CODE_DEFAULT_IM>(&gt;B:LANDING_GEAR_ParkingBrake_Toggle)</LEFT_SINGLE_CODE_DEFAULT_IM> <ANIM_CODE>(#INPUTEVENT_VAR_TYPE#:#INPUTEVENT_VAR_NAME#)</ANIM_CODE> <WWISE_EVENT_1>parking_brake_switch_on</WWISE_EVENT_1> <WWISE_EVENT_2>parking_brake_switch_off</WWISE_EVENT_2> <Switch Param="TYPE"> <Case Value="AS04F"> <ANIM_NAME_KNOB>LANDING_GEAR_#INTERACTION_TYPE#_ParkingBrake</ANIM_NAME_KNOB> <ANIM_NAME_PULL>LANDING_GEAR_#INTERACTION_TYPE#_ParkingBrake_Pull</ANIM_NAME_PULL> </Case> </Switch> </Parameters> <Parameters Type="Default"> <TOOLTIP_PARKING_BRAKE_TITLE>@TT_Package.LANDING_GEAR_#INTERACTION_TYPE#_PARKING_BRAKE_TITLE</TOOLTIP_PARKING_BRAKE_TITLE> <TOOLTIP_PARKING_BRAKE_DESCRIPTION>@TT_Package.LANDING_GEAR_#INTERACTION_TYPE#_PARKING_BRAKE_ACTION_SET</TOOLTIP_PARKING_BRAKE_DESCRIPTION> <TT_INTERACTION>PRIMARY_DOWN</TT_INTERACTION> <TT_INTERACTION_LOCKABLE>LOCK</TT_INTERACTION_LOCKABLE> <TT_ICON>MOVE_Y</TT_ICON> </Parameters> <Parameters Type="Override"> <TOOLTIP_TITLE>#TOOLTIP_PARKING_BRAKE_TITLE#</TOOLTIP_TITLE> <LEFT_SINGLE_CODE_DRAG_IM>#LEFT_SINGLE_CODE_DEFAULT_IM#</LEFT_SINGLE_CODE_DRAG_IM> <Switch Param="TYPE"> <Case Value="AS04F"> <TT_ICON>Pull</TT_ICON> <TT_INTERACTION>SECONDARY_DOWN</TT_INTERACTION> <TT_DESCRIPTION_ID>#TOOLTIP_PARKING_BRAKE_DESCRIPTION#</TT_DESCRIPTION_ID> </Case> <Default> <TOOLTIP_ENTRY_0>LANDING_GEAR_ParkingBrake</TOOLTIP_ENTRY_0> <TT_DESCRIPTION>#TOOLTIP_PARKING_BRAKE_DESCRIPTION#</TT_DESCRIPTION> </Default> </Switch> </Parameters> <Switch> <Case Check="TYPE" Match="AS04F"> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <UseTemplate Name="ASOBO_LANDING_GEAR_Push_Event_Base_Template"> <INTERACTION_TYPE>Switch</INTERACTION_TYPE> <IE_NAME>Parking_Brake</IE_NAME> <SET_STATE_EXTERNAL>p0 (&gt;L:XMLVAR_Parking_Brake) (B:LANDING_GEAR_Parking_Brake_Emergency, Bool) ! (L:XMLVAR_Parking_Brake) and (&gt;K:PARKING_BRAKE_SET)</SET_STATE_EXTERNAL> <GET_STATE_EXTERNAL>(A:BRAKE PARKING POSITION, Bool) sp0</GET_STATE_EXTERNAL> <SIM_STATE_IS_ON_EXTERNAL>l0</SIM_STATE_IS_ON_EXTERNAL> <BINDING_SET_0>Toggle</BINDING_SET_0> <BINDING_SET_0_EVENT_ID>PARKING_BRAKES</BINDING_SET_0_EVENT_ID> <BINDING_SET_0_PARAM_0>(B:LANDING_GEAR_Parking_Brake) !</BINDING_SET_0_PARAM_0> <BINDING_SET_0_PARAM_0_IS_DYNAMIC>True</BINDING_SET_0_PARAM_0_IS_DYNAMIC> <BINDING_SET_1>Set</BINDING_SET_1> <BINDING_SET_1_EVENT_ID>PARKING_BRAKE_SET</BINDING_SET_1_EVENT_ID> <BINDING_SET_1_PARAM_0>p0</BINDING_SET_1_PARAM_0> <BINDING_SET_1_PARAM_0_IS_DYNAMIC>True</BINDING_SET_1_PARAM_0_IS_DYNAMIC> </UseTemplate> <UseTemplate Name="ASOBO_LANDING_GEAR_Base_Template"> <NODE_ID>#NODE_ID#</NODE_ID> <IE_NAME>Parking_Brake_Emergency</IE_NAME> <INTERACTION_TYPE>Knob</INTERACTION_TYPE> <WRAP>False</WRAP> <ALWAYS_USE_ANIM_LAG>True</ALWAYS_USE_ANIM_LAG> <ANIM_LAG>400</ANIM_LAG> <NUM_STATES>2</NUM_STATES> <CREATE_COMPONENT>False</CREATE_COMPONENT> <SET_STATE_EXTERNAL>(B:LANDING_GEAR_Parking_Brake) ! (O:TrySetBrakes) or if{ p0 0 &gt; (&gt;L:XMLVAR_Emergency_Brake) 0 (&gt;O:TrySetBrakes) }</SET_STATE_EXTERNAL> <GET_STATE_EXTERNAL>(L:XMLVAR_Emergency_Brake)</GET_STATE_EXTERNAL> <TT_ICON>MOVE_X</TT_ICON> <TT_INTERACTION>PRIMARY_DOWN+X_AXIS</TT_INTERACTION> <TT_INTERACTION_LOCKABLE>X_AXIS</TT_INTERACTION_LOCKABLE> <TEMPLATE_VARIANT>Switch</TEMPLATE_VARIANT> <IE_ID_EXTERNAL_0>Parking_Brake</IE_ID_EXTERNAL_0> <USE_SIMVAR_FOR_BUTTON_ANIM>False</USE_SIMVAR_FOR_BUTTON_ANIM> <USE_SIMVAR_FOR_KNOB_ANIM>False</USE_SIMVAR_FOR_KNOB_ANIM> <ANIM_CODE_SWITCH>(B:LANDING_GEAR_Parking_Brake, Bool) 100 *</ANIM_CODE_SWITCH> <KNOB_ANIM_CODE>(B:LANDING_GEAR_Parking_Brake_Emergency, Bool) 100 *</KNOB_ANIM_CODE> <CENTER_RADIUS>0.002</CENTER_RADIUS> <IE_ID_EXTERNAL_0>Parking_Brake</IE_ID_EXTERNAL_0> <BINDING_SET_0>Toggle</BINDING_SET_0> <BINDING_SET_0_EVENT_ID>PARKING_BRAKES</BINDING_SET_0_EVENT_ID> <BINDING_SET_0_PARAM_0>0 1 (&gt;O:TrySetBrakes)</BINDING_SET_0_PARAM_0> <BINDING_SET_0_PARAM_0_IS_DYNAMIC>True</BINDING_SET_0_PARAM_0_IS_DYNAMIC> <BINDING_SET_1>Set</BINDING_SET_1> <BINDING_SET_1_EVENT_ID>PARKING_BRAKE_SET</BINDING_SET_1_EVENT_ID> <BINDING_SET_1_PARAM_0>0 1 (&gt;O:TrySetBrakes)</BINDING_SET_1_PARAM_0> <BINDING_SET_1_PARAM_0_IS_DYNAMIC>True</BINDING_SET_1_PARAM_0_IS_DYNAMIC> <TT_DESCRIPTION_ID>@TT_Package.LANDING_GEAR_LEVER_PARKING_BRAKE_EMERGENCY_ACTION</TT_DESCRIPTION_ID> <TT_VALUE>(B:LANDING_GEAR_Parking_Brake_Emergency, Bool) if{ (R:1:@TT_Package.GT_STATE_EMER) } els{ (R:1:@TT_Package.GT_STATE_MODENORM) }</TT_VALUE> <VALUE_UNITS>Boolean</VALUE_UNITS> </UseTemplate> </Component> </Case> <Default> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <UseInputEvent ID="LANDING_GEAR"> <PARKING_BRAKE_ID>1</PARKING_BRAKE_ID> </UseInputEvent> <Switch> <Case Check="USE_PEDAL_AS_SWITCH"> <UseTemplate Name="ASOBO_GT_Interaction_LeftSingle_Code"/> </Case> <Default> <Condition Valid="HAS_ANIM_DELAY"> <True> <UseTemplate Name="ASOBO_GT_Update"> <FREQUENCY>5</FREQUENCY> <UPDATE_CODE> (O:BrakeStartingTime) 0 &gt; if{ (E:SIMULATION TIME, second) (O:BrakeStartingTime) - 0 &gt; if{ (A:BRAKE PARKING POSITION, bool) 100 * (&gt;#INPUTEVENT_VAR_TYPE#:#INPUTEVENT_VAR_NAME#) 0 (&gt;O:BrakeStartingTime) } } </UPDATE_CODE> </UseTemplate> </True> </Condition> <UseTemplate Name="ASOBO_GT_Switch_Code"/> </Default> </Switch> </Component> </Default> </Switch> <Condition Check="HIGHLIGHT_NODE_ID"> <UseTemplate Name="ASOBO_GT_ComponentWith_PART_ID"> <NODE_ID>#HIGHLIGHT_NODE_ID#</NODE_ID> </UseTemplate> </Condition> </Template>

  Parameters initialization:

  • Default

    Parameters set:

    • INPUTEVENT_VAR_TYPE
    • INPUTEVENT_VAR_NAME

    Condition: Test(ANIM_DELAY)

    • Case: True

      Parameters set:

      • HAS_ANIM_DELAY
    • Case: False

      Parameters set:

      • HAS_ANIM_DELAY
      • ANIM_DELAY
  • Default

    Parameters set:

    • ANIM_NAME (using INTERACTION_TYPE)
    • NODE_ID (using INTERACTION_TYPE)
    • PART_ID (using INTERACTION_TYPE)
    • MOUSEFLAGS
    • LEFT_SINGLE_CODE_DEFAULT_IM
    • ANIM_CODE (using INPUTEVENT_VAR_TYPE, INPUTEVENT_VAR_NAME)
    • WWISE_EVENT_1
    • WWISE_EVENT_2

    Condition: Switch(TYPE)

    • Case: AS04F

      Parameters set:

      • ANIM_NAME_KNOB (using INTERACTION_TYPE)
      • ANIM_NAME_PULL (using INTERACTION_TYPE)
  • Default

    Parameters set:

    • TOOLTIP_PARKING_BRAKE_TITLE (using INTERACTION_TYPE)
    • TOOLTIP_PARKING_BRAKE_DESCRIPTION (using INTERACTION_TYPE)
    • TT_INTERACTION
    • TT_INTERACTION_LOCKABLE
    • TT_ICON
  • Override

    Parameters set:

    • TOOLTIP_TITLE (using TOOLTIP_PARKING_BRAKE_TITLE)
    • LEFT_SINGLE_CODE_DRAG_IM (using LEFT_SINGLE_CODE_DEFAULT_IM)

    Condition: Switch(TYPE)

    • Case: AS04F

      Parameters set:

      • TT_ICON
      • TT_INTERACTION
      • TT_DESCRIPTION_ID (using TOOLTIP_PARKING_BRAKE_DESCRIPTION)
    • Default case:

      Parameters set:

      • TOOLTIP_ENTRY_0
      • TT_DESCRIPTION (using TOOLTIP_PARKING_BRAKE_DESCRIPTION)

  Condition: Switch

  • Case: Check(TYPE) Match(AS04F)

    Parameters read:

    • TYPE
    • NODE_ID

    Components:

    • #NODE_ID# (Node: #NODE_ID#)

      Templates used:

      • ASOBO_LANDING_GEAR_Push_Event_Base_Template

        Parameters set:

        • INTERACTION_TYPE
        • IE_NAME
        • SET_STATE_EXTERNAL
        • GET_STATE_EXTERNAL
        • SIM_STATE_IS_ON_EXTERNAL
        • BINDING_SET_0
        • BINDING_SET_0_EVENT_ID
        • BINDING_SET_0_PARAM_0
        • BINDING_SET_0_PARAM_0_IS_DYNAMIC
        • BINDING_SET_1
        • BINDING_SET_1_EVENT_ID
        • BINDING_SET_1_PARAM_0
        • BINDING_SET_1_PARAM_0_IS_DYNAMIC
      • ASOBO_LANDING_GEAR_Base_Template

        Parameters set:

        • NODE_ID (using NODE_ID)
        • IE_NAME
        • INTERACTION_TYPE
        • WRAP
        • ALWAYS_USE_ANIM_LAG
        • ANIM_LAG
        • NUM_STATES
        • CREATE_COMPONENT
        • SET_STATE_EXTERNAL
        • GET_STATE_EXTERNAL
        • TT_ICON
        • TT_INTERACTION
        • TT_INTERACTION_LOCKABLE
        • TEMPLATE_VARIANT
        • IE_ID_EXTERNAL_0
        • USE_SIMVAR_FOR_BUTTON_ANIM
        • USE_SIMVAR_FOR_KNOB_ANIM
        • ANIM_CODE_SWITCH
        • KNOB_ANIM_CODE
        • CENTER_RADIUS
        • BINDING_SET_0
        • BINDING_SET_0_EVENT_ID
        • BINDING_SET_0_PARAM_0
        • BINDING_SET_0_PARAM_0_IS_DYNAMIC
        • BINDING_SET_1
        • BINDING_SET_1_EVENT_ID
        • BINDING_SET_1_PARAM_0
        • BINDING_SET_1_PARAM_0_IS_DYNAMIC
        • TT_DESCRIPTION_ID
        • TT_VALUE
        • VALUE_UNITS
  • Default case:

    Parameters read:

    • NODE_ID

    Components:

    • #NODE_ID# (Node: #NODE_ID#)

      Parameters set:

      • PARKING_BRAKE_ID

      Condition: Switch

      • Case: Check(USE_PEDAL_AS_SWITCH)

        Parameters read:

        • USE_PEDAL_AS_SWITCH

        Templates used:

        • ASOBO_GT_Interaction_LeftSingle_Code
      • Default case:

        Templates used:

        • ASOBO_GT_Switch_Code

        Condition: Valid(HAS_ANIM_DELAY)

        • Case: True

          Templates used:

          • ASOBO_GT_Update

            Parameters set:

            • FREQUENCY
            • UPDATE_CODE (using INPUTEVENT_VAR_TYPE, INPUTEVENT_VAR_NAME)

  Condition: Check(HIGHLIGHT_NODE_ID)

  • Case: True

    Templates used:

    • ASOBO_GT_ComponentWith_PART_ID

      Parameters set:

      • NODE_ID (using HIGHLIGHT_NODE_ID)
  [Go back to top] [Go back to index]

• ASOBO_LANDING_GEAR_Brake_SubTemplate

  Definition from XML
  <Template Name="ASOBO_LANDING_GEAR_Brake_SubTemplate"> <Parameters Type="Default"> <ANIM_NAME>LANDING_GEAR_#INTERACTION_TYPE#_Brake</ANIM_NAME> <NODE_ID>LANDING_GEAR_#INTERACTION_TYPE#_Brake</NODE_ID> <PART_ID>LANDING_GEAR_#INTERACTION_TYPE#_Brake</PART_ID> <TT_DESCRIPTION_ID>@TT_Package.LANDING_GEAR_BRAKES_ACTION</TT_DESCRIPTION_ID> <TOOLTIP_TITLE>@TT_Package.LANDING_GEAR_BRAKES_TITLE</TOOLTIP_TITLE> </Parameters> <Parameters Type="Override"> <INCREMENT Process="Int">16384 20 /</INCREMENT> <U32K Process="Int">16384 2 *</U32K> </Parameters> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <UseInputEvent ID="LANDING_GEAR"> <LEVER_ID>Brake</LEVER_ID> <GET_STATE_EXTERNAL>(O:LANDING_GEAR_Brake_Position) 100 / 2 * 1 - 16384 *</GET_STATE_EXTERNAL> <SET_PARAM_0>p0 16384 *</SET_PARAM_0> <SET_PARAM_0_IS_DYNAMIC>True</SET_PARAM_0_IS_DYNAMIC> <INC_PARAM_0>p0 #INCREMENT# *</INC_PARAM_0> <INC_PARAM_0_IS_DYNAMIC>True</INC_PARAM_0_IS_DYNAMIC> <INC_CODE_ADJUST_VALUE>16384 /</INC_CODE_ADJUST_VALUE> <DEC_PARAM_0>p0 #INCREMENT# *</DEC_PARAM_0> <DEC_PARAM_0_IS_DYNAMIC>True</DEC_PARAM_0_IS_DYNAMIC> <DEC_CODE_ADJUST_VALUE>16384 /</DEC_CODE_ADJUST_VALUE> <MAX_VALUE>16384</MAX_VALUE> <MIN_VALUE>-16384</MIN_VALUE> <STATE_TO_POS_EXTERNAL>16384 + #U32K# / 100 *</STATE_TO_POS_EXTERNAL> <SET_STATE_EXTERNAL>(A:BRAKE PARKING POSITION, Bool) ! if{ l0 (&gt;K:AXIS_LEFT_BRAKE_SET) l0 (&gt;K:AXIS_RIGHT_BRAKE_SET) }</SET_STATE_EXTERNAL> <GET_TT_VALUE_STATE>(A:BRAKE LEFT POSITION, Percent) (A:BRAKE RIGHT POSITION, Percent) + 2 /</GET_TT_VALUE_STATE> <SIMVAR_TO_WATCH_0>BRAKE LEFT POSITION</SIMVAR_TO_WATCH_0> <SIMVAR_TO_WATCH_1>BRAKE RIGHT POSITION</SIMVAR_TO_WATCH_1> <SIMVAR_TO_WATCH_2>BRAKE PARKING POSITION</SIMVAR_TO_WATCH_2> <INIT_CODE> (A:BRAKE PARKING POSITION, Bool) ! if{ (A:BRAKE LEFT POSITION, Position 16k) (A:BRAKE RIGHT POSITION, Position 16k) != if{ (A:BRAKE LEFT POSITION, Position 16k) (&gt;K:AXIS_RIGHT_BRAKE_SET) } (A:BRAKE LEFT POSITION, Percent) (A:BRAKE RIGHT POSITION, Percent) + 2 / (&gt;O:LANDING_GEAR_Brake_Position) } els{ 100 (&gt;O:LANDING_GEAR_Brake_Position) } </INIT_CODE> </UseInputEvent> <UseTemplate Name="ASOBO_GT_Lever_DraggingWheelLeftDrag_Axis"> <ANIM_LAG>200</ANIM_LAG> <TOOLTIP_ENTRY_0>LANDING_GEAR_Brake</TOOLTIP_ENTRY_0> <USE_TRAJECTORY_DRAG_MODE>True</USE_TRAJECTORY_DRAG_MODE> <ANIM_CODE>(B:LANDING_GEAR_Brake, percent)</ANIM_CODE> <POSITIVE_AXIS_CODE>1 (&gt;B:LANDING_GEAR_Brake_Inc)</POSITIVE_AXIS_CODE> <NEGATIVE_AXIS_CODE>1 (&gt;B:LANDING_GEAR_Brake_Dec)</NEGATIVE_AXIS_CODE> <DRAG_CODE>(M:DragPercent) 2 * 1 - (&gt;B:LANDING_GEAR_Brake_Set)</DRAG_CODE> <AXIS>Y</AXIS> <NO_ARROWS/> <CURSOR>Grab</CURSOR> </UseTemplate> </Component> <Condition Check="HIGHLIGHT_NODE_ID"> <UseTemplate Name="ASOBO_GT_ComponentWith_PART_ID"> <NODE_ID>#HIGHLIGHT_NODE_ID#</NODE_ID> </UseTemplate> </Condition> </Template>

  Parameters initialization:

  • Default

    Parameters set:

    • ANIM_NAME (using INTERACTION_TYPE)
    • NODE_ID (using INTERACTION_TYPE)
    • PART_ID (using INTERACTION_TYPE)
    • TT_DESCRIPTION_ID
    • TOOLTIP_TITLE
  • Override

    Parameters set:

    • INCREMENT
    • U32K

  Parameters read:

  • NODE_ID

  Components:

  • #NODE_ID# (Node: #NODE_ID#)

    Parameters set:

    • LEVER_ID
    • GET_STATE_EXTERNAL
    • SET_PARAM_0
    • SET_PARAM_0_IS_DYNAMIC
    • INC_PARAM_0 (using INCREMENT)
    • INC_PARAM_0_IS_DYNAMIC
    • INC_CODE_ADJUST_VALUE
    • DEC_PARAM_0 (using INCREMENT)
    • DEC_PARAM_0_IS_DYNAMIC
    • DEC_CODE_ADJUST_VALUE
    • MAX_VALUE
    • MIN_VALUE
    • STATE_TO_POS_EXTERNAL (using U32K)
    • SET_STATE_EXTERNAL
    • GET_TT_VALUE_STATE
    • SIMVAR_TO_WATCH_0
    • SIMVAR_TO_WATCH_1
    • SIMVAR_TO_WATCH_2
    • INIT_CODE

    Templates used:

    • ASOBO_GT_Lever_DraggingWheelLeftDrag_Axis

      Parameters set:

      • ANIM_LAG
      • TOOLTIP_ENTRY_0
      • USE_TRAJECTORY_DRAG_MODE
      • ANIM_CODE
      • POSITIVE_AXIS_CODE
      • NEGATIVE_AXIS_CODE
      • DRAG_CODE
      • AXIS
      • NO_ARROWS
      • CURSOR

  Condition: Check(HIGHLIGHT_NODE_ID)

  • Case: True

    Templates used:

    • ASOBO_GT_ComponentWith_PART_ID

      Parameters set:

      • NODE_ID (using HIGHLIGHT_NODE_ID)
  [Go back to top] [Go back to index]

• ASOBO_LANDING_GEAR_Indicator_SubTemplate

  Definition from XML
  <Template Name="ASOBO_LANDING_GEAR_Indicator_SubTemplate"> <DefaultTemplateParameters> <NODE_ID>LANDING_GEAR_Indicator_#SIDE#</NODE_ID> <ANIM_NAME>LANDING_GEAR_Indicator_#SIDE#</ANIM_NAME> </DefaultTemplateParameters> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <UseTemplate Name="ASOBO_GT_Anim_Sim"> <ANIM_LENGTH>100</ANIM_LENGTH> <ANIM_SIMVAR>GEAR #SIDE# POSITION</ANIM_SIMVAR> <ANIM_SIMVAR_UNITS>percent</ANIM_SIMVAR_UNITS> </UseTemplate> </Component> </Template>

  Parameters initialization:

  • Default

    Parameters set:

    • NODE_ID (using SIDE)
    • ANIM_NAME (using SIDE)

  Parameters read:

  • NODE_ID

  Components:

  • #NODE_ID# (Node: #NODE_ID#)

    Templates used:

    • ASOBO_GT_Anim_Sim

      Parameters set:

      • ANIM_LENGTH
      • ANIM_SIMVAR (using SIDE)
      • ANIM_SIMVAR_UNITS
  [Go back to top] [Go back to index]

• ASOBO_LANDING_GEAR_Emergency_Template

  Definition from XML
  <Template Name="ASOBO_LANDING_GEAR_Emergency_Template"> <Parameters Type="Default"> <ANIM_NAME>LANDING_GEAR_#INTERACTION_TYPE#_Gear_Emergency</ANIM_NAME> <PART_ID>LANDING_GEAR_#INTERACTION_TYPE#_Gear_Emergency</PART_ID> <NODE_ID>LANDING_GEAR_#INTERACTION_TYPE#_Gear_Emergency</NODE_ID> <WWISE_PREFIX>landing_gear_emergency</WWISE_PREFIX> <ANIM_LAG>400</ANIM_LAG> <DRAG_SCALAR>10</DRAG_SCALAR> <TT_DESCRIPTION_ID>@TT_Package.EMERGENCY_LEVER_GEAR_ACTION</TT_DESCRIPTION_ID> <TOOLTIP_TITLE>@TT_Package.EMERGENCY_LEVER_GEAR_TITLE</TOOLTIP_TITLE> </Parameters> <UseTemplate Name="ASOBO_LANDING_GEAR_Base_Template"> <Switch Param="INTERACTION_TYPE"> <Case Value="Lever"> <IE_NAME>GEARS_Deploy_Lever</IE_NAME> <LEVER_TYPE>2_STATES</LEVER_TYPE> </Case> </Switch> <SET_STATE_EXTERNAL>p0 (A:GEAR EMERGENCY HANDLE POSITION, Bool) != if{ (&gt;K:GEAR_EMERGENCY_HANDLE_TOGGLE) }</SET_STATE_EXTERNAL> <GET_STATE_EXTERNAL>(A:GEAR EMERGENCY HANDLE POSITION, Bool) sp0</GET_STATE_EXTERNAL> </UseTemplate> </Template>

  Parameters initialization:

  • Default

    Parameters set:

    • ANIM_NAME (using INTERACTION_TYPE)
    • PART_ID (using INTERACTION_TYPE)
    • NODE_ID (using INTERACTION_TYPE)
    • WWISE_PREFIX
    • ANIM_LAG
    • DRAG_SCALAR
    • TT_DESCRIPTION_ID
    • TOOLTIP_TITLE

  Templates used:

  • ASOBO_LANDING_GEAR_Base_Template

    Parameters set:

    • SET_STATE_EXTERNAL
    • GET_STATE_EXTERNAL

    Condition: Switch(INTERACTION_TYPE)

    • Case: Lever

      Parameters set:

      • IE_NAME
      • LEVER_TYPE
  [Go back to top] [Go back to index]

• ASOBO_LANDING_GEAR_Light_Test_SubTemplate

  Definition from XML
  <Template Name="ASOBO_LANDING_GEAR_Light_Test_SubTemplate"> <Parameters Type="Default"> <NODE_ID>LANDING_GEAR_#INTERACTION_TYPE#_Light_Test</NODE_ID> <ANIM_NAME>LANDING_GEAR_#INTERACTION_TYPE#_Light_Test</ANIM_NAME> <PART_ID>LANDING_GEAR_#INTERACTION_TYPE#_Light_Test</PART_ID> <WWISE_EVENT_1>landing_gear_light_test_push_button_on</WWISE_EVENT_1> <WWISE_EVENT_2>landing_gear_light_test_push_button_off</WWISE_EVENT_2> <TOOLTIP_TITLE>@TT_Package.LANDING_GEAR_SWITCH_CHECK_LIGHT_TEST_TITLE</TOOLTIP_TITLE> <TT_DESCRIPTION_ID>@TT_Package.LANDING_GEAR_SWITCH_CHECK_LIGHT_TEST_ACTION</TT_DESCRIPTION_ID> </Parameters> <Parameters Type="Override"> <BTN_ID>Light_Test</BTN_ID> </Parameters> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <UseInputEvent ID="LANDING_GEAR"> <SET_STATE_EXTERNAL>p0 if{ 1 (&gt;O:XMLVAR_Light_Test) } els{ 0 (&gt;O:XMLVAR_Light_Test) }</SET_STATE_EXTERNAL> <TT_VALUE>(O:XMLVAR_Light_Test) if{ @TT_Test } els{ @TT_Standby }</TT_VALUE> <TT_VALUE_IS_DYNAMIC>True</TT_VALUE_IS_DYNAMIC> <VALUE_CODE>(O:XMLVAR_Light_Test)</VALUE_CODE> <BINDING_DEC_0>Release</BINDING_DEC_0> <BINDING_DEC_0_PARAM_0>0</BINDING_DEC_0_PARAM_0> <BINDING_INC_0>Push</BINDING_INC_0> <BINDING_INC_0_PARAM_0>1</BINDING_INC_0_PARAM_0> <ANIM>EXTERNAL</ANIM> </UseInputEvent> <UseTemplate Name="ASOBO_GT_Push_Button_Held"> <TOOLTIP_ENTRY_0>LANDING_GEAR_#BTN_ID#</TOOLTIP_ENTRY_0> <LEFT_SINGLE_CODE>(&gt;B:LANDING_GEAR_#BTN_ID#_Push)</LEFT_SINGLE_CODE> <LEFT_LEAVE_CODE>(&gt;B:LANDING_GEAR_#BTN_ID#_Release)</LEFT_LEAVE_CODE> <OVERRIDE_ANIM_CODE>(B:LANDING_GEAR_#BTN_ID#, Bool) 100 *</OVERRIDE_ANIM_CODE> </UseTemplate> </Component> </Template>

  Parameters initialization:

  • Default

    Parameters set:

    • NODE_ID (using INTERACTION_TYPE)
    • ANIM_NAME (using INTERACTION_TYPE)
    • PART_ID (using INTERACTION_TYPE)
    • WWISE_EVENT_1
    • WWISE_EVENT_2
    • TOOLTIP_TITLE
    • TT_DESCRIPTION_ID
  • Override

    Parameters set:

    • BTN_ID

  Parameters read:

  • NODE_ID

  Components:

  • #NODE_ID# (Node: #NODE_ID#)

    Parameters set:

    • SET_STATE_EXTERNAL
    • TT_VALUE
    • TT_VALUE_IS_DYNAMIC
    • VALUE_CODE
    • BINDING_DEC_0
    • BINDING_DEC_0_PARAM_0
    • BINDING_INC_0
    • BINDING_INC_0_PARAM_0
    • ANIM

    Templates used:

    • ASOBO_GT_Push_Button_Held

      Parameters set:

      • TOOLTIP_ENTRY_0 (using BTN_ID)
      • LEFT_SINGLE_CODE (using BTN_ID)
      • LEFT_LEAVE_CODE (using BTN_ID)
      • OVERRIDE_ANIM_CODE (using BTN_ID)
  [Go back to top] [Go back to index]

• ASOBO_LANDING_GEAR_Check_Down_SubTemplate

  Definition from XML
  <Template Name="ASOBO_LANDING_GEAR_Check_Down_SubTemplate"> <Parameters Type="Default"> <NODE_ID>LANDING_GEAR_#INTERACTION_TYPE#_Check_Down</NODE_ID> <ANIM_NAME>LANDING_GEAR_#INTERACTION_TYPE#_Check_Down</ANIM_NAME> <PART_ID>LANDING_GEAR_#INTERACTION_TYPE#_Check_Down</PART_ID> <WWISE_EVENT_1>landing_gear_checkdown_push_button_on</WWISE_EVENT_1> <WWISE_EVENT_2>landing_gear_checkdown_push_button_off</WWISE_EVENT_2> <TOOLTIP_TITLE>@TT_Package.LANDING_GEAR_SWITCH_CHECK_DOWN_TITLE</TOOLTIP_TITLE> <TT_DESCRIPTION_ID>@TT_Package.LANDING_GEAR_SWITCH_CHECK_DOWN_ACTION</TT_DESCRIPTION_ID> </Parameters> <Parameters Type="Override"> <BTN_ID>Check_Down</BTN_ID> </Parameters> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <UseInputEvent ID="LANDING_GEAR"> <SET_STATE_EXTERNAL>p0 if{ 1 (&gt;O:XMLVAR_Check_Down) } els{ 0 (&gt;O:XMLVAR_Check_Down) }</SET_STATE_EXTERNAL> <TT_VALUE>(O:XMLVAR_Check_Down) if{ @TT_Test } els{ @TT_Standby }</TT_VALUE> <TT_VALUE_IS_DYNAMIC>True</TT_VALUE_IS_DYNAMIC> <VALUE_CODE>(O:XMLVAR_Check_Down)</VALUE_CODE> <BINDING_DEC_0>Release</BINDING_DEC_0> <BINDING_DEC_0_PARAM_0>0</BINDING_DEC_0_PARAM_0> <BINDING_INC_0>Push</BINDING_INC_0> <BINDING_INC_0_PARAM_0>1</BINDING_INC_0_PARAM_0> <ANIM>EXTERNAL</ANIM> </UseInputEvent> <UseTemplate Name="ASOBO_GT_Push_Button_Held"> <TOOLTIP_ENTRY_0>LANDING_GEAR_#BTN_ID#</TOOLTIP_ENTRY_0> <LEFT_SINGLE_CODE>(&gt;B:LANDING_GEAR_#BTN_ID#_Push)</LEFT_SINGLE_CODE> <LEFT_LEAVE_CODE>(&gt;B:LANDING_GEAR_#BTN_ID#_Release)</LEFT_LEAVE_CODE> <OVERRIDE_ANIM_CODE>(B:LANDING_GEAR_#BTN_ID#, Bool) 100 *</OVERRIDE_ANIM_CODE> </UseTemplate> </Component> </Template>

  Parameters initialization:

  • Default

    Parameters set:

    • NODE_ID (using INTERACTION_TYPE)
    • ANIM_NAME (using INTERACTION_TYPE)
    • PART_ID (using INTERACTION_TYPE)
    • WWISE_EVENT_1
    • WWISE_EVENT_2
    • TOOLTIP_TITLE
    • TT_DESCRIPTION_ID
  • Override

    Parameters set:

    • BTN_ID

  Parameters read:

  • NODE_ID

  Components:

  • #NODE_ID# (Node: #NODE_ID#)

    Parameters set:

    • SET_STATE_EXTERNAL
    • TT_VALUE
    • TT_VALUE_IS_DYNAMIC
    • VALUE_CODE
    • BINDING_DEC_0
    • BINDING_DEC_0_PARAM_0
    • BINDING_INC_0
    • BINDING_INC_0_PARAM_0
    • ANIM

    Templates used:

    • ASOBO_GT_Push_Button_Held

      Parameters set:

      • TOOLTIP_ENTRY_0 (using BTN_ID)
      • LEFT_SINGLE_CODE (using BTN_ID)
      • LEFT_LEAVE_CODE (using BTN_ID)
      • OVERRIDE_ANIM_CODE (using BTN_ID)
  [Go back to top] [Go back to index]