SIMCONNECT_WAYPOINT_FLAGS

The SIMCONNECT_WAYPOINT_FLAGS enumeration type is used with the SIMCONNECT_DATA_WAYPOINT structure to define waypoints.

 

Syntax

enum SIMCONNECT_WAYPOINT_FLAGS{
    SIMCONNECT_WAYPOINT_SPEED_REQUESTED = 0x04,
    SIMCONNECT_WAYPOINT_THROTTLE_REQUESTED = 0x08,
    SIMCONNECT_WAYPOINT_COMPUTE_VERTICAL_SPEED = 0x10,
    SIMCONNECT_WAYPOINT_ALTITUDE_IS_AGL = 0x20,
    SIMCONNECT_WAYPOINT_ON_GROUND = 0x00100000,
    SIMCONNECT_WAYPOINT_REVERSE = 0x00200000,
    SIMCONNECT_WAYPOINT_WRAP_TO_FIRST = 0x00400000,
    };

 

Members

Member	Description
SIMCONNECT_WAYPOINT_SPEED_REQUESTED	Specifies requested speed is valid.
SIMCONNECT_WAYPOINT_THROTTLE_REQUESTED	Specifies requested throttle percentage is valid.
SIMCONNECT_WAYPOINT_COMPUTE_VERTICAL_SPEED	Specifies that the vertical should be calculated to reach the required speed when crossing the waypoint.
SIMCONNECT_WAYPOINT_ALTITUDE_IS_AGL	Specifies the altitude specified is AGL.
SIMCONNECT_WAYPOINT_ON_GROUND	Specifies the waypoint should be on the ground. Make sure this flag is set if the aircraft is to taxi to this point.
SIMCONNECT_WAYPOINT_REVERSE	Specifies that the aircraft should back up to this waypoint. This is only valid on the first waypoint.
SIMCONNECT_WAYPOINT_WRAP_TO_FIRST	Specifies that the next waypoint is the first waypoint. This is only valid on the last waypoint.

 

Remarks

To set multiple waypoint flags simply OR them together. See the remarks for the SIMCONNECT_DATA_WAYPOINT structure.

 

See Also

• SimConnect API Reference