Material.xml

[Go back to index]

Asobo_EX1\(Base\)Component\Material.xml#

Source XML

<ModelBehaviors> <!– ParametersFn Definitions –> <ParametersFn Name=“ASOBO_Material_Base_Default_Parameters”> <ReturnParameters> <!– Force the scale of the emissive factor to be between 0 and 1 instead of being based on the texture –> <OVERRIDE_BASE_EMISSIVE>True</OVERRIDE_BASE_EMISSIVE> <EMISSIVE_FACTOR>1</EMISSIVE_FACTOR> </ReturnParameters> </ParametersFn> <ParametersFn Name=“ASOBO_Material_Sim_Default_Parameters”> <ReturnParameters> <EMISSIVE_SIMVAR/> <EMISSIVE_SIMVAR_UNITS/> <EMISSIVE_SIMVAR_SCALE>1</EMISSIVE_SIMVAR_SCALE> <EMISSIVE_SIMVAR_BIAS>0</EMISSIVE_SIMVAR_BIAS> </ReturnParameters> </ParametersFn> <ParametersFn Name=“ASOBO_Material_Base_Parameters”> <ReturnParameters> <OVERRIDE>#OVERRIDE_BASE_EMISSIVE#</OVERRIDE> </ReturnParameters> </ParametersFn> <ParametersFn Name=“ASOBO_Material_Sim_Base_Parameters”> <Parameters Type=“Default”> <UseParametersFn Name=“ASOBO_Material_Sim_Default_Parameters”/> <UseParametersFn Name=“ASOBO_Material_Base_Default_Parameters”/> </Parameters> <ReturnParameters> <UseParametersFn Name=“ASOBO_PFN_Call_Overridable_ParametersFn_Helper”> <PFN_PARAM_DEFAULT>ASOBO_Material_Base_Parameters</PFN_PARAM_DEFAULT> <PFN_PARAM_NAME>MATERIAL_BASE_PARAMETERS_FN</PFN_PARAM_NAME> </UseParametersFn> <SIMVAR>#EMISSIVE_SIMVAR#</SIMVAR> <UNITS>#EMISSIVE_SIMVAR_UNITS#</UNITS> <SCALE>#EMISSIVE_SIMVAR_SCALE#</SCALE> <BIAS>#EMISSIVE_SIMVAR_BIAS#</BIAS> </ReturnParameters> </ParametersFn> <ParametersFn Name=“ASOBO_Material_Code_Base_Parameters”> <Parameters Type=“Default”> <UseParametersFn Name=“ASOBO_Material_Base_Default_Parameters”/> </Parameters> <Parameters Type=“Override”> <Condition CheckSavedParameters=“Emissive_Code_Transform_Stack”> <UseParametersFn Name=“ASOBO_Emissive_Code_Transform_Value”> <PLOAD_EMISSIVE_CODE_TRANSFORMS>Emissive_Code_Transform_Stack</PLOAD_EMISSIVE_CODE_TRANSFORMS> </UseParametersFn> </Condition> </Parameters> <ReturnParameters> <UseParametersFn Name=“ASOBO_PFN_Call_Overridable_ParametersFn_Helper”> <PFN_PARAM_DEFAULT>ASOBO_Material_Base_Parameters</PFN_PARAM_DEFAULT> <PFN_PARAM_NAME>MATERIAL_BASE_PARAMETERS_FN</PFN_PARAM_NAME> </UseParametersFn> <CODE>#EMISSIVE_CODE#</CODE> </ReturnParameters> </ParametersFn> <ParametersFn Name=“ASOBO_Emissive_Code_Transform_Value”> <Parameters Type=“Override”> <UseParametersFn Name=“ASOBO_Load_Then_Remove_Parameters_Helper”> <SAVED_PARAMETERS>PLOAD_EMISSIVE_CODE_TRANSFORMS</SAVED_PARAMETERS> </UseParametersFn> </Parameters> <ReturnParameters> <Loop> <Setup> <Param>CUR_ID</Param> <From>0</From> <Inc>1</Inc> <While> <Arg Valid=“EMISSIVE_CODE_TRANSFORM_PFN_#CUR_ID#”/> </While> </Setup> <Do> <Parameters Type=“Override”> <EMISSIVE_CODE_TRANSFORM_PFN Process=“Param”>EMISSIVE_CODE_TRANSFORM_PFN_#CUR_ID#</EMISSIVE_CODE_TRANSFORM_PFN> </Parameters> <Parameters Type=“Override” Lifetime=“Loop”> <UseParametersFn Name="#EMISSIVE_CODE_TRANSFORM_PFN#"/> </Parameters> </Do> <Then> <Condition Check=“EMISSIVE_CODE_TRANSFORM_PFN_RETURN”> <True> <UseParametersFn Name="#EMISSIVE_CODE_TRANSFORM_PFN_RETURN#"/> </True> <False> <EMISSIVE_CODE>#EMISSIVE_CODE#</EMISSIVE_CODE> </False> </Condition> </Then> </Loop> </ReturnParameters> </ParametersFn> <!– Template Definitions –> <Template Name=“ASOBO_Material_Template”> <Switch> <Case NotEmpty=“EMISSIVE_SIMVAR”> <UseTemplate Name=“ASOBO_Material_Sim_Base_Template”/> </Case> <Case NotEmpty=“EMISSIVE_CODE”> <UseTemplate Name=“ASOBO_Material_Code_Base_Template”/> </Case> </Switch> </Template> <Template Name=“ASOBO_Material_Sim_Base_Template”> <Parameters Type=“Default”> <LoadParameters ID=“ASOBO_Material_Sim_Default_Parameters”/> </Parameters> <Parameters Type=“Override”> <UseParametersFn Name=“ASOBO_PFN_Call_Overridable_ParametersFn_Helper”> <PFN_PARAM_DEFAULT>ASOBO_Material_Sim_Base_Parameters</PFN_PARAM_DEFAULT> <PFN_PARAM_NAME>MATERIAL_SIM_BASE_PARAMETERS_FN</PFN_PARAM_NAME> </UseParametersFn> </Parameters> <Material> <EmissiveFactor> <Parameter> <Sim> <Variable>#SIMVAR#</Variable> <Units>#SIMVAR_UNITS#</Units> <Scale>#SIMVAR_SCALE#</Scale> <Bias>#SIMVAR_BIAS#</Bias> </Sim> </Parameter> <OverrideBaseEmissive>#OVERRIDE#</OverrideBaseEmissive> </EmissiveFactor> </Material> </Template> <Template Name=“ASOBO_Material_Code_Base_Template”> <Parameters Type=“Override”> <UseParametersFn Name=“ASOBO_PFN_Call_Overridable_ParametersFn_Helper”> <PFN_PARAM_DEFAULT>ASOBO_Material_Code_Base_Parameters</PFN_PARAM_DEFAULT> <PFN_PARAM_NAME>MATERIAL_CODE_BASE_PARAMETERS_FN</PFN_PARAM_NAME> </UseParametersFn> </Parameters> <Material> <EmissiveFactor> <Parameter> <Code>#CODE#</Code> </Parameter> <OverrideBaseEmissive>#OVERRIDE#</OverrideBaseEmissive> </EmissiveFactor> </Material> </Template> </ModelBehaviors>

Templates#

Template list

1. ASOBO_Material_Template
2. ASOBO_Material_Sim_Base_Template
3. ASOBO_Material_Code_Base_Template

• ASOBO_Material_Template#

  Definition from XML

  <Template Name=“ASOBO_Material_Template”> <Switch> <Case NotEmpty=“EMISSIVE_SIMVAR”> <UseTemplate Name=“ASOBO_Material_Sim_Base_Template”/> </Case> <Case NotEmpty=“EMISSIVE_CODE”> <UseTemplate Name=“ASOBO_Material_Code_Base_Template”/> </Case> </Switch> </Template>

  Condition: Switch

  • Case: NotEmpty(EMISSIVE_SIMVAR)

     

    Templates used:

    • ASOBO_Material_Sim_Base_Template

  • Case: NotEmpty(EMISSIVE_CODE)

     

    Templates used:

    • ASOBO_Material_Code_Base_Template

  [Go back to top] [Go back to index]

• ASOBO_Material_Sim_Base_Template#

  Definition from XML

  <Template Name=“ASOBO_Material_Sim_Base_Template”> <Parameters Type=“Default”> <LoadParameters ID=“ASOBO_Material_Sim_Default_Parameters”/> </Parameters> <Parameters Type=“Override”> <UseParametersFn Name=“ASOBO_PFN_Call_Overridable_ParametersFn_Helper”> <PFN_PARAM_DEFAULT>ASOBO_Material_Sim_Base_Parameters</PFN_PARAM_DEFAULT> <PFN_PARAM_NAME>MATERIAL_SIM_BASE_PARAMETERS_FN</PFN_PARAM_NAME> </UseParametersFn> </Parameters> <Material> <EmissiveFactor> <Parameter> <Sim> <Variable>#SIMVAR#</Variable> <Units>#SIMVAR_UNITS#</Units> <Scale>#SIMVAR_SCALE#</Scale> <Bias>#SIMVAR_BIAS#</Bias> </Sim> </Parameter> <OverrideBaseEmissive>#OVERRIDE#</OverrideBaseEmissive> </EmissiveFactor> </Material> </Template>

  Parameters initialization:

  • Default

  • Override ParametersFn used:

    • ASOBO_PFN_Call_Overridable_ParametersFn_Helper Parameters set:

      • PFN_PARAM_DEFAULT
      • PFN_PARAM_NAME

  Parameters read:

  • SIMVAR
  • SIMVAR_UNITS
  • SIMVAR_SCALE
  • SIMVAR_BIAS
  • OVERRIDE

  [Go back to top] [Go back to index]

• ASOBO_Material_Code_Base_Template#

  Definition from XML

  <Template Name=“ASOBO_Material_Code_Base_Template”> <Parameters Type=“Override”> <UseParametersFn Name=“ASOBO_PFN_Call_Overridable_ParametersFn_Helper”> <PFN_PARAM_DEFAULT>ASOBO_Material_Code_Base_Parameters</PFN_PARAM_DEFAULT> <PFN_PARAM_NAME>MATERIAL_CODE_BASE_PARAMETERS_FN</PFN_PARAM_NAME> </UseParametersFn> </Parameters> <Material> <EmissiveFactor> <Parameter> <Code>#CODE#</Code> </Parameter> <OverrideBaseEmissive>#OVERRIDE#</OverrideBaseEmissive> </EmissiveFactor> </Material> </Template>

  Parameters initialization:

  • Override ParametersFn used:

    • ASOBO_PFN_Call_Overridable_ParametersFn_Helper Parameters set:

      • PFN_PARAM_DEFAULT
      • PFN_PARAM_NAME

  Parameters read:

  • CODE
  • OVERRIDE

  [Go back to top] [Go back to index]

ParametersFn#

• ASOBO_Material_Base_Default_Parameters#

  Definition from XML

  <ParametersFn Name=“ASOBO_Material_Base_Default_Parameters”> <ReturnParameters> <OVERRIDE_BASE_EMISSIVE>True</OVERRIDE_BASE_EMISSIVE> <EMISSIVE_FACTOR>1</EMISSIVE_FACTOR> </ReturnParameters> </ParametersFn>

  Return parameters:

  Parameters set:

  • OVERRIDE_BASE_EMISSIVE
  • EMISSIVE_FACTOR

• ASOBO_Material_Sim_Default_Parameters#

  Definition from XML

  <ParametersFn Name=“ASOBO_Material_Sim_Default_Parameters”> <ReturnParameters> <EMISSIVE_SIMVAR/> <EMISSIVE_SIMVAR_UNITS/> <EMISSIVE_SIMVAR_SCALE>1</EMISSIVE_SIMVAR_SCALE> <EMISSIVE_SIMVAR_BIAS>0</EMISSIVE_SIMVAR_BIAS> </ReturnParameters> </ParametersFn>

  Return parameters:

  Parameters set:

  • EMISSIVE_SIMVAR
  • EMISSIVE_SIMVAR_UNITS
  • EMISSIVE_SIMVAR_SCALE
  • EMISSIVE_SIMVAR_BIAS

• ASOBO_Material_Base_Parameters#

  Definition from XML

  <ParametersFn Name=“ASOBO_Material_Base_Parameters”> <ReturnParameters> <OVERRIDE>#OVERRIDE_BASE_EMISSIVE#</OVERRIDE> </ReturnParameters> </ParametersFn>

  Return parameters:

  Parameters set:

  • OVERRIDE (using OVERRIDE_BASE_EMISSIVE)

• ASOBO_Material_Sim_Base_Parameters#

  Definition from XML

  <ParametersFn Name=“ASOBO_Material_Sim_Base_Parameters”> <Parameters Type=“Default”> <UseParametersFn Name=“ASOBO_Material_Sim_Default_Parameters”/> <UseParametersFn Name=“ASOBO_Material_Base_Default_Parameters”/> </Parameters> <ReturnParameters> <UseParametersFn Name=“ASOBO_PFN_Call_Overridable_ParametersFn_Helper”> <PFN_PARAM_DEFAULT>ASOBO_Material_Base_Parameters</PFN_PARAM_DEFAULT> <PFN_PARAM_NAME>MATERIAL_BASE_PARAMETERS_FN</PFN_PARAM_NAME> </UseParametersFn> <SIMVAR>#EMISSIVE_SIMVAR#</SIMVAR> <UNITS>#EMISSIVE_SIMVAR_UNITS#</UNITS> <SCALE>#EMISSIVE_SIMVAR_SCALE#</SCALE> <BIAS>#EMISSIVE_SIMVAR_BIAS#</BIAS> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Default ParametersFn used:

    • ASOBO_Material_Sim_Default_Parameters
    • ASOBO_Material_Base_Default_Parameters

  Return parameters:

  Parameters set:

  • SIMVAR (using EMISSIVE_SIMVAR)
  • UNITS (using EMISSIVE_SIMVAR_UNITS)
  • SCALE (using EMISSIVE_SIMVAR_SCALE)
  • BIAS (using EMISSIVE_SIMVAR_BIAS)

  ParametersFn used:

  • ASOBO_PFN_Call_Overridable_ParametersFn_Helper Parameters set:

    • PFN_PARAM_DEFAULT
    • PFN_PARAM_NAME

• ASOBO_Material_Code_Base_Parameters#

  Definition from XML

  <ParametersFn Name=“ASOBO_Material_Code_Base_Parameters”> <Parameters Type=“Default”> <UseParametersFn Name=“ASOBO_Material_Base_Default_Parameters”/> </Parameters> <Parameters Type=“Override”> <Condition CheckSavedParameters=“Emissive_Code_Transform_Stack”> <UseParametersFn Name=“ASOBO_Emissive_Code_Transform_Value”> <PLOAD_EMISSIVE_CODE_TRANSFORMS>Emissive_Code_Transform_Stack</PLOAD_EMISSIVE_CODE_TRANSFORMS> </UseParametersFn> </Condition> </Parameters> <ReturnParameters> <UseParametersFn Name=“ASOBO_PFN_Call_Overridable_ParametersFn_Helper”> <PFN_PARAM_DEFAULT>ASOBO_Material_Base_Parameters</PFN_PARAM_DEFAULT> <PFN_PARAM_NAME>MATERIAL_BASE_PARAMETERS_FN</PFN_PARAM_NAME> </UseParametersFn> <CODE>#EMISSIVE_CODE#</CODE> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Default ParametersFn used:

    • ASOBO_Material_Base_Default_Parameters

  • Override Condition: CheckSavedParameters(Emissive_Code_Transform_Stack)

    • Case: True

      ParametersFn used:

      • ASOBO_Emissive_Code_Transform_Value Parameters set:

        • PLOAD_EMISSIVE_CODE_TRANSFORMS

  Return parameters:

  Parameters set:

  • CODE (using EMISSIVE_CODE)

  ParametersFn used:

  • ASOBO_PFN_Call_Overridable_ParametersFn_Helper Parameters set:

    • PFN_PARAM_DEFAULT
    • PFN_PARAM_NAME

• ASOBO_Emissive_Code_Transform_Value#

  Definition from XML

  <ParametersFn Name=“ASOBO_Emissive_Code_Transform_Value”> <Parameters Type=“Override”> <UseParametersFn Name=“ASOBO_Load_Then_Remove_Parameters_Helper”> <SAVED_PARAMETERS>PLOAD_EMISSIVE_CODE_TRANSFORMS</SAVED_PARAMETERS> </UseParametersFn> </Parameters> <ReturnParameters> <Loop> <Setup> <Param>CUR_ID</Param> <From>0</From> <Inc>1</Inc> <While> <Arg Valid=“EMISSIVE_CODE_TRANSFORM_PFN_#CUR_ID#”/> </While> </Setup> <Do> <Parameters Type=“Override”> <EMISSIVE_CODE_TRANSFORM_PFN Process=“Param”>EMISSIVE_CODE_TRANSFORM_PFN_#CUR_ID#</EMISSIVE_CODE_TRANSFORM_PFN> </Parameters> <Parameters Type=“Override” Lifetime=“Loop”> <UseParametersFn Name="#EMISSIVE_CODE_TRANSFORM_PFN#"/> </Parameters> </Do> <Then> <Condition Check=“EMISSIVE_CODE_TRANSFORM_PFN_RETURN”> <True> <UseParametersFn Name="#EMISSIVE_CODE_TRANSFORM_PFN_RETURN#"/> </True> <False> <EMISSIVE_CODE>#EMISSIVE_CODE#</EMISSIVE_CODE> </False> </Condition> </Then> </Loop> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Override ParametersFn used:

    • ASOBO_Load_Then_Remove_Parameters_Helper Parameters set:

      • SAVED_PARAMETERS

  Return parameters:

  Parameters read:

  • CUR_ID
  • EMISSIVE_CODE_TRANSFORM_PFN

  Parameters set:

  • CUR_ID
  • EMISSIVE_CODE_TRANSFORM_PFN (using CUR_ID)

  ParametersFn used:

  • #EMISSIVE_CODE_TRANSFORM_PFN#

  Condition: Check(EMISSIVE_CODE_TRANSFORM_PFN_RETURN)

  • Case: True

    Parameters read:

    • EMISSIVE_CODE_TRANSFORM_PFN_RETURN

    ParametersFn used:

    • #EMISSIVE_CODE_TRANSFORM_PFN_RETURN#

  • Case: False

    Parameters set:

    • EMISSIVE_CODE (using EMISSIVE_CODE)