ParametersFnHelpers.xml

[Go back to index]

Asobo_EX1\(Base\)Helper\ParametersFnHelpers.xml#

Source XML

<ModelBehaviors> <!– IN: PFN_PARAM_DEFAULT (Default parametersFn to call) –> <!– IN: PFN_PARAM_NAME (Name of the parameter users can override to call a different parametersFn than the default) –> <!– OUT: Output of the selected parametersFn –> <ParametersFn Name=“ASOBO_PFN_Call_Overridable_ParametersFn_Helper”> <Parameters Type=“Default”> <#PFN_PARAM_NAME#>#PFN_PARAM_DEFAULT#</#PFN_PARAM_NAME#> </Parameters> <Parameters Type=“Override”> <__FN_NAME__ Process=“Param”>#PFN_PARAM_NAME#</__FN_NAME__> </Parameters> <ReturnParameters> <UseParametersFn Name="#__FN_NAME__#"> <PFN_PARAM_NAME/> </UseParametersFn> </ReturnParameters> </ParametersFn> <!– IN: PFN_TO_CALL (parametersFn to call) –> <!– IN: PFN_PARAM_NAME (Name of the parameter users can override to call a different parametersFn than the default) –> <!– OUT: Output of the selected parametersFn –> <ParametersFn Name=“ASOBO_PFN_Call_Overridable_ParametersFn_No_Default_Helper”> <Parameters Type=“Override”> <__FN_NAME__ Process=“Param”>#PFN_PARAM_NAME#</__FN_NAME__> </Parameters> <ReturnParameters> <Condition NotEmpty="__FN_NAME__"> <UseParametersFn Name="#__FN_NAME__#"> <PFN_PARAM_NAME/> </UseParametersFn> </Condition> </ReturnParameters> </ParametersFn> <!– IN: IN_PARAM_NAME (Parameter to lookup the value of) –> <!– IN: IN_PARAM_ID (Parameter ID to add) –> <!– IN: OUT_PARAM_PREFIX (Prefix) –> <!– IN: OUT_PARAM_SUFFIX (Suffix) –> <!– IN (opt): APPEND_SEPARATOR (if False will not append anything in between IN_PARAM_ID and OUT_PARAM_PREFIX & OUT_PARAM_SUFFIX) –> <!– IN (opt): PREFIX_SEPARATOR (in between OUT_PARAM_PREFIX and IN_PARAM_ID) –> <!– IN (opt): SUFFIX_SEPARATOR (in between IN_PARAM_ID and OUT_PARAM_SUFFIX ) –> <!– OUT: Parameter with concatenated ID –> <ParametersFn Name=“ASOBO_PFN_Add_ID_To_Parameter_Helper”> <Parameters Type=“Default”> <Switch> <Case Valid=“PREFIX_ID”> <OUT_PARAM_PREFIX/> <OUT_PARAM_SUFFIX>#IN_PARAM_NAME#</OUT_PARAM_SUFFIX> </Case> <Default> <OUT_PARAM_PREFIX>#IN_PARAM_NAME#</OUT_PARAM_PREFIX> <OUT_PARAM_SUFFIX/> </Default> </Switch> <APPEND_SEPARATOR>True</APPEND_SEPARATOR> </Parameters> <Parameters Type=“Default”> <Condition Valid=“APPEND_SEPARATOR”> <Condition NotEmpty=“OUT_PARAM_PREFIX”> <PREFIX_SEPARATOR>_</PREFIX_SEPARATOR> </Condition> <Condition NotEmpty=“OUT_PARAM_SUFFIX”> <SUFFIX_SEPARATOR>_</SUFFIX_SEPARATOR> </Condition> </Condition> </Parameters> <Parameters Type=“Default”> <PREFIX_SEPARATOR/> <SUFFIX_SEPARATOR/> </Parameters> <Parameters Type=“Override”> <__PARAM_VALUE__ Process=“Param”>#IN_PARAM_NAME#</__PARAM_VALUE__> <__PARAM_ID__>#IN_PARAM_ID#</__PARAM_ID__> </Parameters> <Parameters Type=“Override”> <__PARAM_ID__>#PREFIX_SEPARATOR##__PARAM_ID__##SUFFIX_SEPARATOR#</__PARAM_ID__> </Parameters> <Parameters Type=“Override”> <__PARAM_NAME__>#OUT_PARAM_PREFIX##__PARAM_ID__##OUT_PARAM_SUFFIX#</__PARAM_NAME__> </Parameters> <ReturnParameters> <#__PARAM_NAME__#>#__PARAM_VALUE__#</#__PARAM_NAME__#> </ReturnParameters> </ParametersFn> <!– Same as ASOBO_PFN_Add_ID_To_Parameter_Helper but for multiple parameters at a time –> <!– IN: Same parameters but all suffixed with an index (starting at 0) ex: IN_PARAM_NAME becomes IN_PARAM_NAME_0, IN_PARAM_NAME_1, … –> <ParametersFn Name=“ASOBO_PFN_Add_ID_To_Parameters_Helper”> <Parameters Type=“Default”> <ELTS_COUNT>512</ELTS_COUNT> <FIRST_ID>0</FIRST_ID> </Parameters> <ReturnParameters> <Loop> <Setup> <Param>CUR_ID</Param> <From>#FIRST_ID#</From> <Inc>1</Inc> <To>#ELTS_COUNT#</To> <While> <Arg Check=“IN_PARAM_#CUR_ID#_NAME”/> </While> </Setup> <Do> <UseParametersFn Name=“ASOBO_PFN_Add_ID_To_Parameter_Helper”> <IN_PARAM_NAME Process=“Param”>IN_PARAM_#CUR_ID#_NAME</IN_PARAM_NAME> <Condition Check=“IN_PARAM_#CUR_ID#_ID”> <IN_PARAM_ID Process=“Param”>IN_PARAM_#CUR_ID#_ID</IN_PARAM_ID> </Condition> <Condition Check=“OUT_PARAM_#CUR_ID#_PREFIX”> <OUT_PARAM_PREFIX Process=“Param”>OUT_PARAM_#CUR_ID#_PREFIX</OUT_PARAM_PREFIX> </Condition> <Condition Check=“OUT_PARAM_#CUR_ID#_SUFFIX”> <OUT_PARAM_SUFFIX Process=“Param”>OUT_PARAM_#CUR_ID#_SUFFIX</OUT_PARAM_SUFFIX> </Condition> <Condition Check=“OUT_PARAM_#CUR_ID#_PREFIX_SEPARATOR”> <PREFIX_SEPARATOR Process=“Param”>OUT_PARAM_#CUR_ID#_PREFIX_SEPARATOR</PREFIX_SEPARATOR> </Condition> <Condition Check=“OUT_PARAM_#CUR_ID#_SUFFIX_SEPARATOR”> <SUFFIX_SEPARATOR Process=“Param”>OUT_PARAM_#CUR_ID#_SUFFIX_SEPARATOR</SUFFIX_SEPARATOR> </Condition> </UseParametersFn> </Do> </Loop> </ReturnParameters> </ParametersFn> <!– IN: IN_PARAM_NAME (Name of the param to unindex) –> <!– OUT: Unindexed parameter –> <ParametersFn Name=“ASOBO_PFN_Remove_ID_From_Parameter_Helper”> <Parameters Type=“Default”> <OUT_PARAM_NAME>#IN_PARAM_NAME#</OUT_PARAM_NAME> </Parameters> <ReturnParameters> <Switch> <Case Valid=“PREFIXED_ID”> <Condition Check="#IN_PARAM_ID#_#IN_PARAM_NAME#"> <#OUT_PARAM_NAME# Process=“Param”>#IN_PARAM_ID#_#IN_PARAM_NAME#</#OUT_PARAM_NAME#> </Condition> </Case> <Default> <Condition Check="#IN_PARAM_NAME#_#IN_PARAM_ID#"> <#OUT_PARAM_NAME# Process=“Param”>#IN_PARAM_NAME#_#IN_PARAM_ID#</#OUT_PARAM_NAME#> </Condition> </Default> </Switch> </ReturnParameters> </ParametersFn> <!– IN: IN_PARAM_0_NAME, IN_PARAM_1_NAME, … (Name of the params to unindex) –> <ParametersFn Name=“ASOBO_PFN_Remove_ID_From_Parameters_Helper”> <Parameters Type=“Default”> <ELTS_COUNT>512</ELTS_COUNT> <FIRST_ID>0</FIRST_ID> </Parameters> <ReturnParameters> <Loop> <Setup> <Param>CUR_ID</Param> <From>#FIRST_ID#</From> <To>#ELTS_COUNT#</To> <Inc>1</Inc> <While> <Arg NotEmpty=“IN_PARAM_#CUR_ID#_NAME”/> </While> </Setup> <Do> <UseParametersFn Name=“ASOBO_PFN_Remove_ID_From_Parameter_Helper”> <IN_PARAM_NAME Process=“Param”>IN_PARAM_#CUR_ID#_NAME</IN_PARAM_NAME> <Condition Check=“IN_PARAM_#CUR_ID#_ID”> <IN_PARAM_ID Process=“Param”>IN_PARAM_#CUR_ID#_ID</IN_PARAM_ID> </Condition> </UseParametersFn> </Do> </Loop> </ReturnParameters> </ParametersFn> <!– In itself doesn’t do anything other than return the value as it was provided –> <!– In practice it is used w/ ASOBO_PFN_Call_Overridable_ParametersFn_Helper to let users change a value right before it is actually used –> <!– IN: IN_PARAM_NAME (Name of the parameter to forward) –> <!– IN (opt): OUT_PARAM_NAME (Output Name of the parameter to forward) –> <ParametersFn Name=“ASOBO_PFN_Return_Parameter_No_Transform_Helper”> <Parameters Type=“Default”> <OUT_PARAM_NAME>#IN_PARAM_NAME#</OUT_PARAM_NAME> </Parameters> <ReturnParameters> <#OUT_PARAM_NAME# Process=“Param”>#IN_PARAM_NAME#</#OUT_PARAM_NAME#> </ReturnParameters> </ParametersFn> <!– Same as ASOBO_PFN_Return_Parameter_No_Transform_Helper but for multiple parameters at a time –> <!– IN: IN_PARAM_NAME_0, IN_PARAM_NAME_1, … (Name of the parameters to forward) –> <ParametersFn Name=“ASOBO_PFN_Return_Parameters_No_Transform_Helper”> <ReturnParameters> <Loop> <Setup> <Param>CUR_ID</Param> <From>0</From> <Inc>1</Inc> <While> <Arg Check=“IN_PARAM_NAME_#CUR_ID#”/> </While> </Setup> <Do> <UseParametersFn Name=“ASOBO_PFN_Return_Parameter_No_Transform_Helper”> <IN_PARAM_NAME Process=“Param”>IN_PARAM_NAME_#CUR_ID#</IN_PARAM_NAME> </UseParametersFn> </Do> </Loop> </ReturnParameters> </ParametersFn> <!– IN (opt): IN_PARAM_NAME_ID (ID used for generating the SUFFIX_ID) –> <!– IN (opt): OUT_PARAM_VALUE_PREFIX (Prefix given to the input IN_PARAM_NAME_ID value) –> <!– IN (opt): OUT_PARAM_VALUE_SUFFIX (Suffix given to the input IN_PARAM_NAME_ID value) –> <!– IN (opt): OUT_PARAM_NAME (Name given to the parameter in the output) –> <!– OUT: SUFFIX_ID –> <ParametersFn Name=“ASOBO_Indexer_Helper”> <Parameters Type=“Default”> <OUT_PARAM_VALUE_PREFIX>_</OUT_PARAM_VALUE_PREFIX> <OUT_PARAM_VALUE_SUFFIX/> </Parameters> <Parameters Type=“Override”> <__PARAM_VALUE__ Process=“Param”>#IN_PARAM_NAME_ID#</__PARAM_VALUE__> </Parameters> <Parameters Type=“Default”> <OUT_PARAM_NAME>SUFFIX_#IN_PARAM_NAME_ID#</OUT_PARAM_NAME> </Parameters> <ReturnParameters> <#OUT_PARAM_NAME#>#OUT_PARAM_VALUE_PREFIX##__PARAM_VALUE__##OUT_PARAM_VALUE_SUFFIX#</#OUT_PARAM_NAME#> <#IN_PARAM_NAME_ID# Process=“Param”>#IN_PARAM_NAME_ID#</#IN_PARAM_NAME_ID#> </ReturnParameters> </ParametersFn> <!– IN: PFN_TO_CALL (pfn to call for each element) –> <!– IN: PFN_GET_PARAMETERS (PFN to call to get a list of parameters) –> <!– IN (opt): OUT_PARAM_NAME (Name of the parameter containing the parameter name) –> <!– IN (opt): OUT_PARAM_VALUE (Name of the parameter containing the parameter value) –> <!– IN (opt): OUT_PARAM_ID (Name of the parameter containing the parameter id) –> <ParametersFn Name=“ASOBO_For_Each_Of_PFN_Helper”> <Parameters Type=“Default”> <OUT_PARAM_NAME>PARAM_NAME</OUT_PARAM_NAME> <OUT_PARAM_VALUE>PARAM_VALUE</OUT_PARAM_VALUE> <OUT_PARAM_ID>PARAM_ID</OUT_PARAM_ID> </Parameters> <ReturnParameters> <Loop> <Setup> <Param>PARAM</Param> <Value>VALUE</Value> <Parameters> <UseParametersFn Name="#PFN_GET_PARAMETERS#"/> </Parameters> </Setup> <Do> <Parameters Type=“Override” Lifetime=“Loop”> <UseParametersFn Name=“ASOBO_Increment_ID_Helper”/> </Parameters> <UseParametersFn Name="#PFN_TO_CALL#"> <#OUT_PARAM_NAME#>#PARAM#</#OUT_PARAM_NAME#> <#OUT_PARAM_ID#>#CUR_ID#</#OUT_PARAM_ID#> <#OUT_PARAM_VALUE#>#VALUE#</#OUT_PARAM_VALUE#> </UseParametersFn> </Do> </Loop> </ReturnParameters> </ParametersFn> <!– IN (opt): OUT_PARAM_ID_NAME (Name to give to the loop index parameter) –> <!– IN (opt): OUT_FIRST_ID (First ID that will be assigned if the variable doesn’t exist) –> <!– IN (opt): INCREMENT_COUNT (How many increments) –> <ParametersFn Name=“ASOBO_Increment_ID_Helper”> <Parameters Type=“Default”> <OUT_PARAM_ID_NAME>CUR_ID</OUT_PARAM_ID_NAME> <OUT_FIRST_ID>0</OUT_FIRST_ID> <INCREMENT_COUNT>1</INCREMENT_COUNT> </Parameters> <Parameters Type=“Override”> <Condition Check="#OUT_PARAM_ID_NAME#"> <CUR_VALUE Process=“Param”>#OUT_PARAM_ID_NAME#</CUR_VALUE> </Condition> </Parameters> <ReturnParameters> <Condition Check="#OUT_PARAM_ID_NAME#"> <True> <#OUT_PARAM_ID_NAME# Process=“Int”>#CUR_VALUE# #INCREMENT_COUNT# +</#OUT_PARAM_ID_NAME#> </True> <False> <#OUT_PARAM_ID_NAME#>#OUT_FIRST_ID#</#OUT_PARAM_ID_NAME#> </False> </Condition> </ReturnParameters> </ParametersFn> <!– IN (opt): TOKEN_PREFIX (Param prefix to look for) –> <!– IN (opt): TOKEN_SUFFIX (Param suffix to look for) –> <!– OUT: TOKEN_COUNT (number of loop iterations) –> <!– OUT: LAST_TOKEN_ID (last valid id iterated on) –> <ParametersFn Name=“ASOBO_Count_Token_Helper”> <Parameters Type=“Default”> <FROM>0</FROM> <INC>1</INC> <TOKEN_PREFIX/> <TOKEN_SUFFIX/> <OUT_PARAM_NAME_COUNT>TOKEN_COUNT</OUT_PARAM_NAME_COUNT> <OUT_PARAM_NAME_LAST_ID>LAST_TOKEN_ID</OUT_PARAM_NAME_LAST_ID> </Parameters> <ReturnParameters> <Loop> <Setup> <Param>CUR_ID</Param> <From>#FROM#</From> <Inc>#INC#</Inc> <While> <Arg NotEmpty="#TOKEN_PREFIX##CUR_ID##TOKEN_SUFFIX#"/> </While> </Setup> <Do/> <Then> <#OUT_PARAM_NAME_COUNT# Process=“Int”>#CUR_ID# #FROM# -</#OUT_PARAM_NAME_COUNT#> <#OUT_PARAM_NAME_LAST_ID# Process=“Int”>#CUR_ID# 1 -</#OUT_PARAM_NAME_LAST_ID#> </Then> </Loop> </ReturnParameters> </ParametersFn> <!– IN: TOKEN_COLLECTION (save containing parameters) –> <!– IN (opt): TOKEN_PREFIX (Param prefix to look for) –> <!– IN (opt): TOKEN_SUFFIX (Param suffix to look for) –> <!– OUT: TOKEN_COUNT (number of loop iterations) –> <ParametersFn Name=“ASOBO_Count_Token_In_Save_Helper”> <Parameters Type=“Default”> <FROM>0</FROM> <INC>1</INC> <TOKEN_PREFIX/> <TOKEN_SUFFIX/> <OUT_PARAM_NAME_COUNT>TOKEN_COUNT</OUT_PARAM_NAME_COUNT> <OUT_PARAM_NAME_LAST_ID>LAST_TOKEN_ID</OUT_PARAM_NAME_LAST_ID> </Parameters> <Parameters Type=“Override”> <LoadParameters ID="#TOKEN_COLLECTION#"/> </Parameters> <ReturnParameters> <Loop> <Setup> <Param>CUR_ID</Param> <From>#FROM#</From> <Inc>#INC#</Inc> <While> <Arg NotEmpty="#TOKEN_PREFIX##CUR_ID##TOKEN_SUFFIX#"/> </While> </Setup> <Do/> <Then> <#OUT_PARAM_NAME_COUNT# Process=“Int”>#CUR_ID# #FROM# -</#OUT_PARAM_NAME_COUNT#> <#OUT_PARAM_NAME_LAST_ID# Process=“Int”>#CUR_ID# 1 -</#OUT_PARAM_NAME_LAST_ID#> </Then> </Loop> </ReturnParameters> </ParametersFn> <!– IN (opt): TOKEN_PREFIX (Param prefix to look for) –> <!– IN (opt): TOKEN_SUFFIX (Param suffix to look for) –> <!– IN (req:Number): parameters have to be numbers –> <!– OUT: TOKEN_MIN (Minimum value found) –> <!– OUT: TOKEN_MAX (Maximum value found) –> <!– OUT: TOKEN_COUNT (number of loop iterations) –> <!– OUT: LAST_TOKEN_ID (last valid id iterated on) –> <ParametersFn Name=“ASOBO_Find_Min_Max_Helper”> <Parameters Type=“Default”> <MIN_INIT_VALUE>1000000</MIN_INIT_VALUE> <MAX_INIT_VALUE>-1000000</MAX_INIT_VALUE> <FROM>0</FROM> <INC>1</INC> <TOKEN_PREFIX/> <TOKEN_SUFFIX/> <OUT_PARAM_NAME_COUNT>TOKEN_COUNT</OUT_PARAM_NAME_COUNT> <OUT_PARAM_NAME_LAST_ID>LAST_TOKEN_ID</OUT_PARAM_NAME_LAST_ID> <OUT_PARAM_NAME_MIN>TOKEN_MIN</OUT_PARAM_NAME_MIN> <OUT_PARAM_NAME_MAX>TOKEN_MAX</OUT_PARAM_NAME_MAX> </Parameters> <Parameters Type=“Override”> <__MIN__>#MIN_INIT_VALUE#</__MIN__> <__MAX__>#MAX_INIT_VALUE#</__MAX__> </Parameters> <ReturnParameters> <Loop> <Setup> <Param>CUR_ID</Param> <From>#FROM#</From> <Inc>#INC#</Inc> <While> <Arg Check="#TOKEN_PREFIX##CUR_ID##TOKEN_SUFFIX#"/> </While> </Setup> <Do> <Parameters Type=“Override”> <PARAM_VALUE Process=“Param”>#TOKEN_PREFIX##CUR_ID##TOKEN_SUFFIX#</PARAM_VALUE> </Parameters> <Parameters Type=“Override” Lifetime=“Loop”> <Condition> <Test> <Lower> <Number>#PARAM_VALUE#</Number> <Number>#__MIN__#</Number> </Lower> </Test> <True> <__MIN__>#PARAM_VALUE#</__MIN__> </True> </Condition> <Condition> <Test> <Greater> <Number>#PARAM_VALUE#</Number> <Number>#__MAX__#</Number> </Greater> </Test> <True> <__MAX__>#PARAM_VALUE#</__MAX__> </True> </Condition> </Parameters> </Do> <Then> <#OUT_PARAM_NAME_LAST_ID# Process=“Int”>#CUR_ID# 1 -</#OUT_PARAM_NAME_LAST_ID#> <#OUT_PARAM_NAME_COUNT#>#CUR_ID#</#OUT_PARAM_NAME_COUNT#> <#OUT_PARAM_NAME_MIN#>#__MIN__#</#OUT_PARAM_NAME_MIN#> <#OUT_PARAM_NAME_MAX#>#__MAX__#</#OUT_PARAM_NAME_MAX#> </Then> </Loop> </ReturnParameters> </ParametersFn> <!– Same as ASOBO_Find_Min_Max_Helper but looking for a specific save –> <!– IN : SAVED_PARAMETERS (Param prefix to look for) –> <!– OUT: TOKEN_MIN (Minimum value found) –> <!– OUT: TOKEN_MAX (Maximum value found) –> <!– OUT: TOKEN_COUNT (number of loop iterations) –> <!– OUT: LAST_TOKEN_ID (last valid id iterated on) –> <ParametersFn Name=“ASOBO_Find_Min_Max_Helper_In”> <Parameters Type=“Default”> <MIN_INIT_VALUE>1000000</MIN_INIT_VALUE> <MAX_INIT_VALUE>-1000000</MAX_INIT_VALUE> <OUT_PARAM_NAME_COUNT>TOKEN_COUNT</OUT_PARAM_NAME_COUNT> <OUT_PARAM_NAME_LAST_ID>LAST_TOKEN_ID</OUT_PARAM_NAME_LAST_ID> <OUT_PARAM_NAME_MIN>TOKEN_MIN</OUT_PARAM_NAME_MIN> <OUT_PARAM_NAME_MAX>TOKEN_MAX</OUT_PARAM_NAME_MAX> </Parameters> <Parameters Type=“Override”> <__MIN__>#MIN_INIT_VALUE#</__MIN__> <__MAX__>#MAX_INIT_VALUE#</__MAX__> </Parameters> <ReturnParameters> <Loop> <Setup> <Value>PARAM_VALUE</Value> <Parameters> <LoadParameters ID="#SAVED_PARAMETERS#"/> </Parameters> </Setup> <Do> <Parameters Type=“Override” Lifetime=“Loop”> <UseParametersFn Name=“ASOBO_Increment_ID_Helper”/> </Parameters> <Parameters Type=“Override” Lifetime=“Loop”> <Condition> <Test> <Lower> <Number>#PARAM_VALUE#</Number> <Number>#__MIN__#</Number> </Lower> </Test> <True> <__MIN__>#PARAM_VALUE#</__MIN__> </True> </Condition> <Condition> <Test> <Greater> <Number>#PARAM_VALUE#</Number> <Number>#__MAX__#</Number> </Greater> </Test> <True> <__MAX__>#PARAM_VALUE#</__MAX__> </True> </Condition> </Parameters> </Do> <Then> <#OUT_PARAM_NAME_LAST_ID#>#CUR_ID#</#OUT_PARAM_NAME_LAST_ID#> <#OUT_PARAM_NAME_COUNT# Process=“Int”>#CUR_ID# 1 +</#OUT_PARAM_NAME_COUNT#> <#OUT_PARAM_NAME_MIN#>#__MIN__#</#OUT_PARAM_NAME_MIN#> <#OUT_PARAM_NAME_MAX#>#__MAX__#</#OUT_PARAM_NAME_MAX#> </Then> </Loop> </ReturnParameters> </ParametersFn> <!– IN: SAVED_PARAMETERS (name of the saved parameters to load) –> <!– OUT: loaded parameters with original save removed by default –> <ParametersFn Name=“ASOBO_Load_Then_Remove_Parameters_Helper”> <Parameters Type=“Default”> <REMOVE_#SAVED_PARAMETERS#>True</REMOVE_#SAVED_PARAMETERS#> </Parameters> <Parameters Type=“Override”> <__SAVED_PARAMETERS__ Process=“Param”>#SAVED_PARAMETERS#</__SAVED_PARAMETERS__> </Parameters> <ReturnParameters> <Condition CheckSavedParameters="#__SAVED_PARAMETERS__#"> <LoadParameters ID="#__SAVED_PARAMETERS__#"/> <Condition Valid=“REMOVE_#SAVED_PARAMETERS#"> <RemoveSavedParameters ID=”#__SAVED_PARAMETERS__#"/> </Condition> </Condition> </ReturnParameters> </ParametersFn> <!– IN: SAVED_PARAMETERS (name of the saved parameters to load) –> <!– IN: SAVE_TO (name of the saved parameters to load) –> <!– OUT: loaded parameters with original save removed by default –> <ParametersFn Name=“ASOBO_Save_To_Then_Remove_Parameters_Helper”> <Parameters Type=“Default”> <REMOVE_#SAVED_PARAMETERS#>True</REMOVE_#SAVED_PARAMETERS#> <APPEND>Override</APPEND> </Parameters> <Parameters Type=“Override”> <__SAVED_PARAMETERS__ Process=“Param”>#SAVED_PARAMETERS#</__SAVED_PARAMETERS__> </Parameters> <ReturnParameters> <Condition CheckSavedParameters="#__SAVED_PARAMETERS__#"> <SaveParameters ID="#SAVE_TO#" Append="#APPEND#"> <LoadParameters ID="#__SAVED_PARAMETERS__#"/> </SaveParameters> <Condition Valid=“REMOVE_#SAVED_PARAMETERS#"> <RemoveSavedParameters ID=”#__SAVED_PARAMETERS__#"/> </Condition> </Condition> </ReturnParameters> </ParametersFn> <!– In: MAX_VALUE (value maximum has to be positive) –> <!– In: MIN_VALUE (value minimum has to be negative) –> <!– OUT: computed ratios to 0 –> <ParametersFn Name=“ASOBO_Get_MIN_MAX_Ratios_Helper”> <Parameters Type=“Override”> <FULL_RANGE Process=“Float”>#MAX_VALUE# #MIN_VALUE# -</FULL_RANGE> <POSITIVE_RANGE Process=“Float”>#MAX_VALUE# 0 -</POSITIVE_RANGE> <NEGATIVE_RANGE Process=“Float”>0 #MIN_VALUE# -</NEGATIVE_RANGE> </Parameters> <Parameters Type=“Override”> <RATIO_POSITIVE Process=“Float”>#POSITIVE_RANGE# #FULL_RANGE# /</RATIO_POSITIVE> <RATIO_NEGATIVE Process=“Float”>#NEGATIVE_RANGE# #FULL_RANGE# /</RATIO_NEGATIVE> </Parameters> <Parameters Type=“Override”> <POSITIVE_TO_NEGATIVE_RATIO Process=“Float”>#RATIO_NEGATIVE# 0 > if{ #RATIO_POSITIVE# #RATIO_NEGATIVE# / } els{ 1 }</POSITIVE_TO_NEGATIVE_RATIO> <NEGATIVE_TO_POSITIVE_RATIO Process=“Float”>#RATIO_POSITIVE# 0 > if{ #RATIO_NEGATIVE# #RATIO_POSITIVE# / } els{ 1 }</NEGATIVE_TO_POSITIVE_RATIO> </Parameters> <ReturnParameters> <FULL_RANGE>#FULL_RANGE#</FULL_RANGE> <POSITIVE_RANGE>#POSITIVE_RANGE#</POSITIVE_RANGE> <NEGATIVE_RANGE>#NEGATIVE_RANGE#</NEGATIVE_RANGE> <RATIO_POSITIVE>#RATIO_POSITIVE#</RATIO_POSITIVE> <RATIO_NEGATIVE>#RATIO_NEGATIVE#</RATIO_NEGATIVE> <POSITIVE_TO_NEGATIVE_RATIO>#POSITIVE_TO_NEGATIVE_RATIO#</POSITIVE_TO_NEGATIVE_RATIO> <NEGATIVE_TO_POSITIVE_RATIO>#NEGATIVE_TO_POSITIVE_RATIO#</NEGATIVE_TO_POSITIVE_RATIO> <MIN_VALUE>#MIN_VALUE#</MIN_VALUE> <MAX_VALUE>#MAX_VALUE#</MAX_VALUE> </ReturnParameters> </ParametersFn> <!– In (opt): OUT_PARAM_ID –> <!– OUT: OUT_PARAM_SUFFIX –> <ParametersFn Name=“ASOBO_Get_Param_Suffix_Helper”> <Parameters Type=“Default”> <OUT_PARAM_NAME>OUT_PARAM_SUFFIX</OUT_PARAM_NAME> </Parameters> <Parameters Type=“Default”> <Condition Check=“OUT_PARAM_ID”> <True> <OUT_PARAM_SUFFIX>_#OUT_PARAM_ID#</OUT_PARAM_SUFFIX> </True> <False> <OUT_PARAM_SUFFIX/> </False> </Condition> </Parameters> <ReturnParameters> <#OUT_PARAM_NAME#>#OUT_PARAM_SUFFIX#</#OUT_PARAM_NAME#> </ReturnParameters> </ParametersFn> <!– In (opt): OUT_PARAM_ID –> <!– OUT: OUT_PARAM_PREFIX –> <ParametersFn Name=“ASOBO_Get_Param_Prefix_Helper”> <Parameters Type=“Default”> <Condition Check=“OUT_PARAM_ID”> <True> <OUT_PARAM_PREFIX>#OUT_PARAM_ID#_</OUT_PARAM_PREFIX> </True> <False> <OUT_PARAM_PREFIX/> </False> </Condition> </Parameters> <ReturnParameters> <OUT_PARAM_PREFIX>#OUT_PARAM_PREFIX#</OUT_PARAM_PREFIX> </ReturnParameters> </ParametersFn> <!– In: Any number of PARAM_PREFIX_N or PARAM_SUFFIX_N (N being a sequentially increasing int, starting at 0) –> <!– OUT: A param named by the value of OUTGOING_PARAM (defaults to OUT_VALUE), which contains the maximum value of N –> <ParametersFn Name=“ASOBO_Get_Max_Param_Iteration_Helper”> <Parameters Type=“Default”> <MAX_VALUE>-1</MAX_VALUE> <PARAM_PREFIX/> <PARAM_SUFFIX/> <MAX_ITERATION>0</MAX_ITERATION> <OUTGOING_PARAM>OUT_VALUE</OUTGOING_PARAM> </Parameters> <Parameters Type=“Override”> <Loop> <Setup> <Param>CUR_ID</Param> <From>1</From> <Inc>1</Inc> <While> <Not> <Arg Valid=“INFINITE”/> </Not> </While> </Setup> <Do> <SaveParameters ID=“MaxParam_FoundValue”> <FOUND_VALUE>False</FOUND_VALUE> <MAX_ITERATION>#MAX_ITERATION#</MAX_ITERATION> </SaveParameters> <Parameters Type=“Override” Lifetime=“Loop”> <Loop> <Setup> <Param>CUR_PARAM_ID</Param> <From>0</From> <Inc>1</Inc> <While> <Or> <Arg NotEmpty=“PARAM_PREFIX_#CUR_PARAM_ID#”/> <Arg NotEmpty=“PARAM_SUFIX_#CUR_PARAM_ID#”/> </Or> </While> </Setup> <Do> <Parameters Type=“Override” Lifetime=“Iteration”> <PARAM_PREFIX Process=“Param”>PARAM_PREFIX_#CUR_PARAM_ID#</PARAM_PREFIX> <PARAM_SUFIX Process=“Param”>PARAM_SUFIX_#CUR_PARAM_ID#</PARAM_SUFIX> </Parameters> <Parameters Type=“Override” Lifetime=“Iteration”> <PARAM_FINAL Process=“Param”>#PARAM_PREFIX##CUR_ID##PARAM_SUFFIX#</PARAM_FINAL> </Parameters> <Parameters Type=“Override” Lifetime=“Loop”> <Condition NotEmpty=“PARAM_FINAL”> <SaveParameters ID=“MaxParam_FoundValue”> <FOUND_VALUE>True</FOUND_VALUE> <MAX_ITERATION Process=“Int”>#MAX_ITERATION# #CUR_ID# max</MAX_ITERATION> </SaveParameters> </Condition> </Parameters> </Do> </Loop> <LoadParameters ID=“MaxParam_FoundValue”/> <Condition Valid=“FOUND_VALUE”> <False> <Break/> </False> </Condition> </Parameters> </Do> </Loop> <LoadParameters ID=“MaxParam_FoundValue”/> </Parameters> <ReturnParameters> <#OUTGOING_PARAM# Process=“Int”>#MAX_ITERATION#</#OUTGOING_PARAM#> </ReturnParameters> </ParametersFn> <ParametersFn Name=“ASOBO_Get_Non_Linear_Animation_Code”> <Parameters Type=“Default”> <SELECTION>50</SELECTION><!– dynamic parameter for example gallons qty in a fuel tank –> <!– at least 2 points of reference to interpolate –> <!– ANIM_VALUE = frame for which the REF_VALUE is corresponding –> <!– REF_VALUE = value used as a comparison point to SELECTION –> <ANIM_VALUE_0>0</ANIM_VALUE_0> <REF_VALUE_0>0</REF_VALUE_0> <ANIM_VALUE_1>100</ANIM_VALUE_1> <REF_VALUE_1>100</REF_VALUE_1> <!– Add as much as necessary when calling the template –> <!– ######################################################### –> <ANIM_LENGTH>100</ANIM_LENGTH><!– number of frame in the animation –> <MAX_POINT_INDEX>1</MAX_POINT_INDEX><!– index of latest point of reference –> <MAX_DISPLAYABLE>100</MAX_DISPLAYABLE><!– higher bound the value SELECTION can reach (the maximum your gauge can display) –> <MIN_DISPLAYABLE>0</MIN_DISPLAYABLE><!– lower bound the value SELECTION can reach (the minimum your gauge can display) –> <EXIT_TEMPLATE>ASOBO_GT_Anim_Code</EXIT_TEMPLATE> <EXIT_PARAM_NAME>ANIM_CODE</EXIT_PARAM_NAME> <CONTENT></CONTENT><!– CONTENT init: can be used to tweak the value before interpolating –> </Parameters> <Parameters Type=“Override”> <ANIM_VAL_PREVIOUS_POINT Process=“Param”>ANIM_VALUE_#MAX_POINT_INDEX#</ANIM_VAL_PREVIOUS_POINT> <REF_VAL_PREVIOUS_POINT Process=“Param”>REF_VALUE_#MAX_POINT_INDEX#</REF_VAL_PREVIOUS_POINT> <MAX_POINT_INDEX_MINUS_1 Process=“Param”>#MAX_POINT_INDEX# 1 -</MAX_POINT_INDEX_MINUS_1> </Parameters> <Parameters Type=“Override”> <Loop> <Setup> <Param>NEXT_ID</Param> <From>#MAX_POINT_INDEX#</From> <Inc>-1</Dec> <To>0</To> </Setup> <Do> <Parameters Type=“Override” Lifetime=“Loop”> <ANIM_VAL_CURRENT_POINT Process=“Param”>ANIM_VALUE_#NEXT_ID#</ANIM_VAL_CURRENT_POINT> <REF_VAL_CURRENT_POINT Process=“Param”>REF_VALUE_#NEXT_ID#</REF_VAL_CURRENT_POINT> </Parameters> <Parameters Type=“Override” Lifetime=“Loop”> <CONTENT> #CONTENT# l0 #REF_VAL_CURRENT_POINT# > if{ l0 #REF_VAL_CURRENT_POINT# - #REF_VAL_PREVIOUS_POINT# #REF_VAL_CURRENT_POINT# - / #ANIM_VAL_PREVIOUS_POINT# #ANIM_VAL_CURRENT_POINT# - * #ANIM_VAL_CURRENT_POINT# + sp1 g1 } </CONTENT> <ANIM_VAL_PREVIOUS_POINT Process=“Param”>ANIM_VALUE_#NEXT_ID#</ANIM_VAL_PREVIOUS_POINT> <REF_VAL_PREVIOUS_POINT Process=“Param”>REF_VALUE_#NEXT_ID#</REF_VAL_PREVIOUS_POINT> </Parameters> </Do> <Then> <RETURN_VALUE> #SELECTION# #MAX_DISPLAYABLE# min #MIN_DISPLAYABLE# max sp0 #CONTENT# :1 l1 </RETURN_VALUE> </Then> </Loop> </Parameters> <ReturnParameters> <#EXIT_PARAM_NAME#>#RETURN_VALUE#</#EXIT_PARAM_NAME#> </ReturnParameters> </ParametersFn> </ModelBehaviors>

ParametersFn#

• ASOBO_PFN_Call_Overridable_ParametersFn_Helper#

  Definition from XML

  <ParametersFn Name=“ASOBO_PFN_Call_Overridable_ParametersFn_Helper”> <Parameters Type=“Default”> <#PFN_PARAM_NAME#>#PFN_PARAM_DEFAULT#</#PFN_PARAM_NAME#> </Parameters> <Parameters Type=“Override”> <__FN_NAME__ Process=“Param”>#PFN_PARAM_NAME#</__FN_NAME__> </Parameters> <ReturnParameters> <UseParametersFn Name="#__FN_NAME__#"> <PFN_PARAM_NAME/> </UseParametersFn> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Default Parameters set:

    • #PFN_PARAM_NAME# (using PFN_PARAM_DEFAULT)

  • Override Parameters set:

    • __FN_NAME__ (using PFN_PARAM_NAME)

  Return parameters:

  Parameters read:

  • __FN_NAME__

  ParametersFn used:

  • #__FN_NAME__# Parameters set:

    • PFN_PARAM_NAME

• ASOBO_PFN_Call_Overridable_ParametersFn_No_Default_Helper#

  Definition from XML

  <ParametersFn Name=“ASOBO_PFN_Call_Overridable_ParametersFn_No_Default_Helper”> <Parameters Type=“Override”> <__FN_NAME__ Process=“Param”>#PFN_PARAM_NAME#</__FN_NAME__> </Parameters> <ReturnParameters> <Condition NotEmpty="__FN_NAME__"> <UseParametersFn Name="#__FN_NAME__#"> <PFN_PARAM_NAME/> </UseParametersFn> </Condition> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Override Parameters set:

    • __FN_NAME__ (using PFN_PARAM_NAME)

  Return parameters:

  Condition: NotEmpty(__FN_NAME__)

  • Case: True

    Parameters read:

    • __FN_NAME__

    ParametersFn used:

    • #__FN_NAME__# Parameters set:

      • PFN_PARAM_NAME

• ASOBO_PFN_Add_ID_To_Parameter_Helper#

  Definition from XML

  <ParametersFn Name=“ASOBO_PFN_Add_ID_To_Parameter_Helper”> <Parameters Type=“Default”> <Switch> <Case Valid=“PREFIX_ID”> <OUT_PARAM_PREFIX/> <OUT_PARAM_SUFFIX>#IN_PARAM_NAME#</OUT_PARAM_SUFFIX> </Case> <Default> <OUT_PARAM_PREFIX>#IN_PARAM_NAME#</OUT_PARAM_PREFIX> <OUT_PARAM_SUFFIX/> </Default> </Switch> <APPEND_SEPARATOR>True</APPEND_SEPARATOR> </Parameters> <Parameters Type=“Default”> <Condition Valid=“APPEND_SEPARATOR”> <Condition NotEmpty=“OUT_PARAM_PREFIX”> <PREFIX_SEPARATOR>_</PREFIX_SEPARATOR> </Condition> <Condition NotEmpty=“OUT_PARAM_SUFFIX”> <SUFFIX_SEPARATOR>_</SUFFIX_SEPARATOR> </Condition> </Condition> </Parameters> <Parameters Type=“Default”> <PREFIX_SEPARATOR/> <SUFFIX_SEPARATOR/> </Parameters> <Parameters Type=“Override”> <__PARAM_VALUE__ Process=“Param”>#IN_PARAM_NAME#</__PARAM_VALUE__> <__PARAM_ID__>#IN_PARAM_ID#</__PARAM_ID__> </Parameters> <Parameters Type=“Override”> <__PARAM_ID__>#PREFIX_SEPARATOR##__PARAM_ID__##SUFFIX_SEPARATOR#</__PARAM_ID__> </Parameters> <Parameters Type=“Override”> <__PARAM_NAME__>#OUT_PARAM_PREFIX##__PARAM_ID__##OUT_PARAM_SUFFIX#</__PARAM_NAME__> </Parameters> <ReturnParameters> <#__PARAM_NAME__#>#__PARAM_VALUE__#</#__PARAM_NAME__#> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Default Parameters set:

    • APPEND_SEPARATOR

    Condition: Switch

    • Case: Valid(PREFIX_ID)

      Parameters set:

      • OUT_PARAM_PREFIX
      • OUT_PARAM_SUFFIX (using IN_PARAM_NAME)

    • Default case:

      Parameters set:

      • OUT_PARAM_PREFIX (using IN_PARAM_NAME)
      • OUT_PARAM_SUFFIX

  • Default Condition: Valid(APPEND_SEPARATOR)

    • Case: True

      Condition: NotEmpty(OUT_PARAM_PREFIX)

      • Case: True

        Parameters set:

        • PREFIX_SEPARATOR

      Condition: NotEmpty(OUT_PARAM_SUFFIX)

      • Case: True

        Parameters set:

        • SUFFIX_SEPARATOR

  • Default Parameters set:

    • PREFIX_SEPARATOR
    • SUFFIX_SEPARATOR

  • Override Parameters set:

    • __PARAM_VALUE__ (using IN_PARAM_NAME)
    • __PARAM_ID__ (using IN_PARAM_ID)

  • Override Parameters set:

    • __PARAM_ID__ (using PREFIX_SEPARATOR, __PARAM_ID__, SUFFIX_SEPARATOR)

  • Override Parameters set:

    • __PARAM_NAME__ (using OUT_PARAM_PREFIX, __PARAM_ID__, OUT_PARAM_SUFFIX)

  Return parameters:

  Parameters set:

  • #__PARAM_NAME__# (using __PARAM_VALUE__)

• ASOBO_PFN_Add_ID_To_Parameters_Helper#

  Definition from XML

  <ParametersFn Name=“ASOBO_PFN_Add_ID_To_Parameters_Helper”> <Parameters Type=“Default”> <ELTS_COUNT>512</ELTS_COUNT> <FIRST_ID>0</FIRST_ID> </Parameters> <ReturnParameters> <Loop> <Setup> <Param>CUR_ID</Param> <From>#FIRST_ID#</From> <Inc>1</Inc> <To>#ELTS_COUNT#</To> <While> <Arg Check=“IN_PARAM_#CUR_ID#_NAME”/> </While> </Setup> <Do> <UseParametersFn Name=“ASOBO_PFN_Add_ID_To_Parameter_Helper”> <IN_PARAM_NAME Process=“Param”>IN_PARAM_#CUR_ID#_NAME</IN_PARAM_NAME> <Condition Check=“IN_PARAM_#CUR_ID#_ID”> <IN_PARAM_ID Process=“Param”>IN_PARAM_#CUR_ID#_ID</IN_PARAM_ID> </Condition> <Condition Check=“OUT_PARAM_#CUR_ID#_PREFIX”> <OUT_PARAM_PREFIX Process=“Param”>OUT_PARAM_#CUR_ID#_PREFIX</OUT_PARAM_PREFIX> </Condition> <Condition Check=“OUT_PARAM_#CUR_ID#_SUFFIX”> <OUT_PARAM_SUFFIX Process=“Param”>OUT_PARAM_#CUR_ID#_SUFFIX</OUT_PARAM_SUFFIX> </Condition> <Condition Check=“OUT_PARAM_#CUR_ID#_PREFIX_SEPARATOR”> <PREFIX_SEPARATOR Process=“Param”>OUT_PARAM_#CUR_ID#_PREFIX_SEPARATOR</PREFIX_SEPARATOR> </Condition> <Condition Check=“OUT_PARAM_#CUR_ID#_SUFFIX_SEPARATOR”> <SUFFIX_SEPARATOR Process=“Param”>OUT_PARAM_#CUR_ID#_SUFFIX_SEPARATOR</SUFFIX_SEPARATOR> </Condition> </UseParametersFn> </Do> </Loop> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Default Parameters set:

    • ELTS_COUNT
    • FIRST_ID

  Return parameters:

  Parameters read:

  • FIRST_ID
  • ELTS_COUNT
  • IN_PARAM_#CUR_ID#_NAME

  Parameters set:

  • CUR_ID

  ParametersFn used:

  • ASOBO_PFN_Add_ID_To_Parameter_Helper Parameters set:

    • IN_PARAM_NAME (using CUR_ID)

    Condition: Check(IN_PARAM_#CUR_ID#_ID)

    • Case: True

      Parameters set:

      • IN_PARAM_ID (using CUR_ID)

    Condition: Check(OUT_PARAM_#CUR_ID#_PREFIX)

    • Case: True

      Parameters set:

      • OUT_PARAM_PREFIX (using CUR_ID)

    Condition: Check(OUT_PARAM_#CUR_ID#_SUFFIX)

    • Case: True

      Parameters set:

      • OUT_PARAM_SUFFIX (using CUR_ID)

    Condition: Check(OUT_PARAM_#CUR_ID#_PREFIX_SEPARATOR)

    • Case: True

      Parameters set:

      • PREFIX_SEPARATOR (using CUR_ID)

    Condition: Check(OUT_PARAM_#CUR_ID#_SUFFIX_SEPARATOR)

    • Case: True

      Parameters set:

      • SUFFIX_SEPARATOR (using CUR_ID)

• ASOBO_PFN_Remove_ID_From_Parameter_Helper#

  Definition from XML

  <ParametersFn Name=“ASOBO_PFN_Remove_ID_From_Parameter_Helper”> <Parameters Type=“Default”> <OUT_PARAM_NAME>#IN_PARAM_NAME#</OUT_PARAM_NAME> </Parameters> <ReturnParameters> <Switch> <Case Valid=“PREFIXED_ID”> <Condition Check="#IN_PARAM_ID#_#IN_PARAM_NAME#"> <#OUT_PARAM_NAME# Process=“Param”>#IN_PARAM_ID#_#IN_PARAM_NAME#</#OUT_PARAM_NAME#> </Condition> </Case> <Default> <Condition Check="#IN_PARAM_NAME#_#IN_PARAM_ID#"> <#OUT_PARAM_NAME# Process=“Param”>#IN_PARAM_NAME#_#IN_PARAM_ID#</#OUT_PARAM_NAME#> </Condition> </Default> </Switch> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Default Parameters set:

    • OUT_PARAM_NAME (using IN_PARAM_NAME)

  Return parameters:

  Condition: Switch

  • Case: Valid(PREFIXED_ID)

    Condition: Check(#IN_PARAM_ID#_#IN_PARAM_NAME#)

    • Case: True

      Parameters set:

      • #OUT_PARAM_NAME# (using IN_PARAM_ID, IN_PARAM_NAME)

  • Default case:

    Condition: Check(#IN_PARAM_NAME#_#IN_PARAM_ID#)

    • Case: True

      Parameters set:

      • #OUT_PARAM_NAME# (using IN_PARAM_NAME, IN_PARAM_ID)

• ASOBO_PFN_Remove_ID_From_Parameters_Helper#

  Definition from XML

  <ParametersFn Name=“ASOBO_PFN_Remove_ID_From_Parameters_Helper”> <Parameters Type=“Default”> <ELTS_COUNT>512</ELTS_COUNT> <FIRST_ID>0</FIRST_ID> </Parameters> <ReturnParameters> <Loop> <Setup> <Param>CUR_ID</Param> <From>#FIRST_ID#</From> <To>#ELTS_COUNT#</To> <Inc>1</Inc> <While> <Arg NotEmpty=“IN_PARAM_#CUR_ID#_NAME”/> </While> </Setup> <Do> <UseParametersFn Name=“ASOBO_PFN_Remove_ID_From_Parameter_Helper”> <IN_PARAM_NAME Process=“Param”>IN_PARAM_#CUR_ID#_NAME</IN_PARAM_NAME> <Condition Check=“IN_PARAM_#CUR_ID#_ID”> <IN_PARAM_ID Process=“Param”>IN_PARAM_#CUR_ID#_ID</IN_PARAM_ID> </Condition> </UseParametersFn> </Do> </Loop> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Default Parameters set:

    • ELTS_COUNT
    • FIRST_ID

  Return parameters:

  Parameters read:

  • FIRST_ID
  • ELTS_COUNT
  • CUR_ID

  Parameters set:

  • CUR_ID

  ParametersFn used:

  • ASOBO_PFN_Remove_ID_From_Parameter_Helper Parameters set:

    • IN_PARAM_NAME (using CUR_ID)

    Condition: Check(IN_PARAM_#CUR_ID#_ID)

    • Case: True

      Parameters set:

      • IN_PARAM_ID (using CUR_ID)

• ASOBO_PFN_Return_Parameter_No_Transform_Helper#

  Definition from XML

  <ParametersFn Name=“ASOBO_PFN_Return_Parameter_No_Transform_Helper”> <Parameters Type=“Default”> <OUT_PARAM_NAME>#IN_PARAM_NAME#</OUT_PARAM_NAME> </Parameters> <ReturnParameters> <#OUT_PARAM_NAME# Process=“Param”>#IN_PARAM_NAME#</#OUT_PARAM_NAME#> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Default Parameters set:

    • OUT_PARAM_NAME (using IN_PARAM_NAME)

  Return parameters:

  Parameters set:

  • #OUT_PARAM_NAME# (using IN_PARAM_NAME)

• ASOBO_PFN_Return_Parameters_No_Transform_Helper#

  Definition from XML

  <ParametersFn Name=“ASOBO_PFN_Return_Parameters_No_Transform_Helper”> <ReturnParameters> <Loop> <Setup> <Param>CUR_ID</Param> <From>0</From> <Inc>1</Inc> <While> <Arg Check=“IN_PARAM_NAME_#CUR_ID#”/> </While> </Setup> <Do> <UseParametersFn Name=“ASOBO_PFN_Return_Parameter_No_Transform_Helper”> <IN_PARAM_NAME Process=“Param”>IN_PARAM_NAME_#CUR_ID#</IN_PARAM_NAME> </UseParametersFn> </Do> </Loop> </ReturnParameters> </ParametersFn>

  Return parameters:

  Parameters read:

  • IN_PARAM_NAME_#CUR_ID#

  Parameters set:

  • CUR_ID

  ParametersFn used:

  • ASOBO_PFN_Return_Parameter_No_Transform_Helper Parameters set:

    • IN_PARAM_NAME (using CUR_ID)

• ASOBO_Indexer_Helper#

  Definition from XML

  <ParametersFn Name=“ASOBO_Indexer_Helper”> <Parameters Type=“Default”> <OUT_PARAM_VALUE_PREFIX>_</OUT_PARAM_VALUE_PREFIX> <OUT_PARAM_VALUE_SUFFIX/> </Parameters> <Parameters Type=“Override”> <__PARAM_VALUE__ Process=“Param”>#IN_PARAM_NAME_ID#</__PARAM_VALUE__> </Parameters> <Parameters Type=“Default”> <OUT_PARAM_NAME>SUFFIX_#IN_PARAM_NAME_ID#</OUT_PARAM_NAME> </Parameters> <ReturnParameters> <#OUT_PARAM_NAME#>#OUT_PARAM_VALUE_PREFIX##__PARAM_VALUE__##OUT_PARAM_VALUE_SUFFIX#</#OUT_PARAM_NAME#> <#IN_PARAM_NAME_ID# Process=“Param”>#IN_PARAM_NAME_ID#</#IN_PARAM_NAME_ID#> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Default Parameters set:

    • OUT_PARAM_VALUE_PREFIX
    • OUT_PARAM_VALUE_SUFFIX

  • Override Parameters set:

    • __PARAM_VALUE__ (using IN_PARAM_NAME_ID)

  • Default Parameters set:

    • OUT_PARAM_NAME (using IN_PARAM_NAME_ID)

  Return parameters:

  Parameters set:

  • #OUT_PARAM_NAME# (using OUT_PARAM_VALUE_PREFIX, __PARAM_VALUE__, OUT_PARAM_VALUE_SUFFIX)
  • #IN_PARAM_NAME_ID# (using IN_PARAM_NAME_ID)

• ASOBO_For_Each_Of_PFN_Helper#

  Definition from XML

  <ParametersFn Name=“ASOBO_For_Each_Of_PFN_Helper”> <Parameters Type=“Default”> <OUT_PARAM_NAME>PARAM_NAME</OUT_PARAM_NAME> <OUT_PARAM_VALUE>PARAM_VALUE</OUT_PARAM_VALUE> <OUT_PARAM_ID>PARAM_ID</OUT_PARAM_ID> </Parameters> <ReturnParameters> <Loop> <Setup> <Param>PARAM</Param> <Value>VALUE</Value> <Parameters> <UseParametersFn Name="#PFN_GET_PARAMETERS#"/> </Parameters> </Setup> <Do> <Parameters Type=“Override” Lifetime=“Loop”> <UseParametersFn Name=“ASOBO_Increment_ID_Helper”/> </Parameters> <UseParametersFn Name="#PFN_TO_CALL#"> <#OUT_PARAM_NAME#>#PARAM#</#OUT_PARAM_NAME#> <#OUT_PARAM_ID#>#CUR_ID#</#OUT_PARAM_ID#> <#OUT_PARAM_VALUE#>#VALUE#</#OUT_PARAM_VALUE#> </UseParametersFn> </Do> </Loop> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Default Parameters set:

    • OUT_PARAM_NAME
    • OUT_PARAM_VALUE
    • OUT_PARAM_ID

  Return parameters:

  Parameters read:

  • VALUE
  • PFN_GET_PARAMETERS
  • PFN_TO_CALL

  Parameters set:

  • PARAM

  ParametersFn used:

  • #PFN_GET_PARAMETERS#

  • ASOBO_Increment_ID_Helper

  • #PFN_TO_CALL# Parameters set:

    • #OUT_PARAM_NAME# (using PARAM)
    • #OUT_PARAM_ID# (using CUR_ID)
    • #OUT_PARAM_VALUE# (using VALUE)

• ASOBO_Increment_ID_Helper#

  Definition from XML

  <ParametersFn Name=“ASOBO_Increment_ID_Helper”> <Parameters Type=“Default”> <OUT_PARAM_ID_NAME>CUR_ID</OUT_PARAM_ID_NAME> <OUT_FIRST_ID>0</OUT_FIRST_ID> <INCREMENT_COUNT>1</INCREMENT_COUNT> </Parameters> <Parameters Type=“Override”> <Condition Check="#OUT_PARAM_ID_NAME#"> <CUR_VALUE Process=“Param”>#OUT_PARAM_ID_NAME#</CUR_VALUE> </Condition> </Parameters> <ReturnParameters> <Condition Check="#OUT_PARAM_ID_NAME#"> <True> <#OUT_PARAM_ID_NAME# Process=“Int”>#CUR_VALUE# #INCREMENT_COUNT# +</#OUT_PARAM_ID_NAME#> </True> <False> <#OUT_PARAM_ID_NAME#>#OUT_FIRST_ID#</#OUT_PARAM_ID_NAME#> </False> </Condition> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Default Parameters set:

    • OUT_PARAM_ID_NAME
    • OUT_FIRST_ID
    • INCREMENT_COUNT

  • Override Condition: Check(#OUT_PARAM_ID_NAME#)

    • Case: True

      Parameters set:

      • CUR_VALUE (using OUT_PARAM_ID_NAME)

  Return parameters:

  Condition: Check(#OUT_PARAM_ID_NAME#)

  • Case: True

    Parameters set:

    • #OUT_PARAM_ID_NAME# (using CUR_VALUE, INCREMENT_COUNT)

  • Case: False

    Parameters set:

    • #OUT_PARAM_ID_NAME# (using OUT_FIRST_ID)

• ASOBO_Count_Token_Helper#

  Definition from XML

  <ParametersFn Name=“ASOBO_Count_Token_Helper”> <Parameters Type=“Default”> <FROM>0</FROM> <INC>1</INC> <TOKEN_PREFIX/> <TOKEN_SUFFIX/> <OUT_PARAM_NAME_COUNT>TOKEN_COUNT</OUT_PARAM_NAME_COUNT> <OUT_PARAM_NAME_LAST_ID>LAST_TOKEN_ID</OUT_PARAM_NAME_LAST_ID> </Parameters> <ReturnParameters> <Loop> <Setup> <Param>CUR_ID</Param> <From>#FROM#</From> <Inc>#INC#</Inc> <While> <Arg NotEmpty="#TOKEN_PREFIX##CUR_ID##TOKEN_SUFFIX#"/> </While> </Setup> <Do/> <Then> <#OUT_PARAM_NAME_COUNT# Process=“Int”>#CUR_ID# #FROM# -</#OUT_PARAM_NAME_COUNT#> <#OUT_PARAM_NAME_LAST_ID# Process=“Int”>#CUR_ID# 1 -</#OUT_PARAM_NAME_LAST_ID#> </Then> </Loop> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Default Parameters set:

    • FROM
    • INC
    • TOKEN_PREFIX
    • TOKEN_SUFFIX
    • OUT_PARAM_NAME_COUNT
    • OUT_PARAM_NAME_LAST_ID

  Return parameters:

  Parameters read:

  • FROM
  • INC
  • TOKEN_PREFIX
  • CUR_ID
  • TOKEN_SUFFIX

  Parameters set:

  • CUR_ID
  • #OUT_PARAM_NAME_COUNT# (using CUR_ID, FROM)
  • #OUT_PARAM_NAME_LAST_ID# (using CUR_ID)

• ASOBO_Count_Token_In_Save_Helper#

  Definition from XML

  <ParametersFn Name=“ASOBO_Count_Token_In_Save_Helper”> <Parameters Type=“Default”> <FROM>0</FROM> <INC>1</INC> <TOKEN_PREFIX/> <TOKEN_SUFFIX/> <OUT_PARAM_NAME_COUNT>TOKEN_COUNT</OUT_PARAM_NAME_COUNT> <OUT_PARAM_NAME_LAST_ID>LAST_TOKEN_ID</OUT_PARAM_NAME_LAST_ID> </Parameters> <Parameters Type=“Override”> <LoadParameters ID="#TOKEN_COLLECTION#"/> </Parameters> <ReturnParameters> <Loop> <Setup> <Param>CUR_ID</Param> <From>#FROM#</From> <Inc>#INC#</Inc> <While> <Arg NotEmpty="#TOKEN_PREFIX##CUR_ID##TOKEN_SUFFIX#"/> </While> </Setup> <Do/> <Then> <#OUT_PARAM_NAME_COUNT# Process=“Int”>#CUR_ID# #FROM# -</#OUT_PARAM_NAME_COUNT#> <#OUT_PARAM_NAME_LAST_ID# Process=“Int”>#CUR_ID# 1 -</#OUT_PARAM_NAME_LAST_ID#> </Then> </Loop> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Default Parameters set:

    • FROM
    • INC
    • TOKEN_PREFIX
    • TOKEN_SUFFIX
    • OUT_PARAM_NAME_COUNT
    • OUT_PARAM_NAME_LAST_ID

  • Override Parameters read:

    • TOKEN_COLLECTION

  Return parameters:

  Parameters read:

  • FROM
  • INC
  • TOKEN_PREFIX
  • CUR_ID
  • TOKEN_SUFFIX

  Parameters set:

  • CUR_ID
  • #OUT_PARAM_NAME_COUNT# (using CUR_ID, FROM)
  • #OUT_PARAM_NAME_LAST_ID# (using CUR_ID)

• ASOBO_Find_Min_Max_Helper#

  Definition from XML

  <ParametersFn Name=“ASOBO_Find_Min_Max_Helper”> <Parameters Type=“Default”> <MIN_INIT_VALUE>1000000</MIN_INIT_VALUE> <MAX_INIT_VALUE>-1000000</MAX_INIT_VALUE> <FROM>0</FROM> <INC>1</INC> <TOKEN_PREFIX/> <TOKEN_SUFFIX/> <OUT_PARAM_NAME_COUNT>TOKEN_COUNT</OUT_PARAM_NAME_COUNT> <OUT_PARAM_NAME_LAST_ID>LAST_TOKEN_ID</OUT_PARAM_NAME_LAST_ID> <OUT_PARAM_NAME_MIN>TOKEN_MIN</OUT_PARAM_NAME_MIN> <OUT_PARAM_NAME_MAX>TOKEN_MAX</OUT_PARAM_NAME_MAX> </Parameters> <Parameters Type=“Override”> <__MIN__>#MIN_INIT_VALUE#</__MIN__> <__MAX__>#MAX_INIT_VALUE#</__MAX__> </Parameters> <ReturnParameters> <Loop> <Setup> <Param>CUR_ID</Param> <From>#FROM#</From> <Inc>#INC#</Inc> <While> <Arg Check="#TOKEN_PREFIX##CUR_ID##TOKEN_SUFFIX#"/> </While> </Setup> <Do> <Parameters Type=“Override”> <PARAM_VALUE Process=“Param”>#TOKEN_PREFIX##CUR_ID##TOKEN_SUFFIX#</PARAM_VALUE> </Parameters> <Parameters Type=“Override” Lifetime=“Loop”> <Condition> <Test> <Lower> <Number>#PARAM_VALUE#</Number> <Number>#__MIN__#</Number> </Lower> </Test> <True> <__MIN__>#PARAM_VALUE#</__MIN__> </True> </Condition> <Condition> <Test> <Greater> <Number>#PARAM_VALUE#</Number> <Number>#__MAX__#</Number> </Greater> </Test> <True> <__MAX__>#PARAM_VALUE#</__MAX__> </True> </Condition> </Parameters> </Do> <Then> <#OUT_PARAM_NAME_LAST_ID# Process=“Int”>#CUR_ID# 1 -</#OUT_PARAM_NAME_LAST_ID#> <#OUT_PARAM_NAME_COUNT#>#CUR_ID#</#OUT_PARAM_NAME_COUNT#> <#OUT_PARAM_NAME_MIN#>#__MIN__#</#OUT_PARAM_NAME_MIN#> <#OUT_PARAM_NAME_MAX#>#__MAX__#</#OUT_PARAM_NAME_MAX#> </Then> </Loop> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Default Parameters set:

    • MIN_INIT_VALUE
    • MAX_INIT_VALUE
    • FROM
    • INC
    • TOKEN_PREFIX
    • TOKEN_SUFFIX
    • OUT_PARAM_NAME_COUNT
    • OUT_PARAM_NAME_LAST_ID
    • OUT_PARAM_NAME_MIN
    • OUT_PARAM_NAME_MAX

  • Override Parameters set:

    • __MIN__ (using MIN_INIT_VALUE)
    • __MAX__ (using MAX_INIT_VALUE)

  Return parameters:

  Parameters read:

  • FROM
  • INC
  • #TOKEN_PREFIX##CUR_ID##TOKEN_SUFFIX#

  Parameters set:

  • CUR_ID
  • PARAM_VALUE (using TOKEN_PREFIX, CUR_ID, TOKEN_SUFFIX)
  • #OUT_PARAM_NAME_LAST_ID# (using CUR_ID)
  • #OUT_PARAM_NAME_COUNT# (using CUR_ID)
  • #OUT_PARAM_NAME_MIN# (using __MIN__)
  • #OUT_PARAM_NAME_MAX# (using __MAX__)

  Condition: Test

  • Case: True

    Parameters set:

    • __MIN__ (using PARAM_VALUE)

  Condition: Test

  • Case: True

    Parameters set:

    • __MAX__ (using PARAM_VALUE)

• ASOBO_Find_Min_Max_Helper_In#

  Definition from XML

  <ParametersFn Name=“ASOBO_Find_Min_Max_Helper_In”> <Parameters Type=“Default”> <MIN_INIT_VALUE>1000000</MIN_INIT_VALUE> <MAX_INIT_VALUE>-1000000</MAX_INIT_VALUE> <OUT_PARAM_NAME_COUNT>TOKEN_COUNT</OUT_PARAM_NAME_COUNT> <OUT_PARAM_NAME_LAST_ID>LAST_TOKEN_ID</OUT_PARAM_NAME_LAST_ID> <OUT_PARAM_NAME_MIN>TOKEN_MIN</OUT_PARAM_NAME_MIN> <OUT_PARAM_NAME_MAX>TOKEN_MAX</OUT_PARAM_NAME_MAX> </Parameters> <Parameters Type=“Override”> <__MIN__>#MIN_INIT_VALUE#</__MIN__> <__MAX__>#MAX_INIT_VALUE#</__MAX__> </Parameters> <ReturnParameters> <Loop> <Setup> <Value>PARAM_VALUE</Value> <Parameters> <LoadParameters ID="#SAVED_PARAMETERS#"/> </Parameters> </Setup> <Do> <Parameters Type=“Override” Lifetime=“Loop”> <UseParametersFn Name=“ASOBO_Increment_ID_Helper”/> </Parameters> <Parameters Type=“Override” Lifetime=“Loop”> <Condition> <Test> <Lower> <Number>#PARAM_VALUE#</Number> <Number>#__MIN__#</Number> </Lower> </Test> <True> <__MIN__>#PARAM_VALUE#</__MIN__> </True> </Condition> <Condition> <Test> <Greater> <Number>#PARAM_VALUE#</Number> <Number>#__MAX__#</Number> </Greater> </Test> <True> <__MAX__>#PARAM_VALUE#</__MAX__> </True> </Condition> </Parameters> </Do> <Then> <#OUT_PARAM_NAME_LAST_ID#>#CUR_ID#</#OUT_PARAM_NAME_LAST_ID#> <#OUT_PARAM_NAME_COUNT# Process=“Int”>#CUR_ID# 1 +</#OUT_PARAM_NAME_COUNT#> <#OUT_PARAM_NAME_MIN#>#__MIN__#</#OUT_PARAM_NAME_MIN#> <#OUT_PARAM_NAME_MAX#>#__MAX__#</#OUT_PARAM_NAME_MAX#> </Then> </Loop> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Default Parameters set:

    • MIN_INIT_VALUE
    • MAX_INIT_VALUE
    • OUT_PARAM_NAME_COUNT
    • OUT_PARAM_NAME_LAST_ID
    • OUT_PARAM_NAME_MIN
    • OUT_PARAM_NAME_MAX

  • Override Parameters set:

    • __MIN__ (using MIN_INIT_VALUE)
    • __MAX__ (using MAX_INIT_VALUE)

  Return parameters:

  Parameters read:

  • PARAM_VALUE
  • SAVED_PARAMETERS

  Parameters set:

  • #OUT_PARAM_NAME_LAST_ID# (using CUR_ID)
  • #OUT_PARAM_NAME_COUNT# (using CUR_ID)
  • #OUT_PARAM_NAME_MIN# (using __MIN__)
  • #OUT_PARAM_NAME_MAX# (using __MAX__)

  ParametersFn used:

  • ASOBO_Increment_ID_Helper

  Condition: Test

  • Case: True

    Parameters set:

    • __MIN__ (using PARAM_VALUE)

  Condition: Test

  • Case: True

    Parameters set:

    • __MAX__ (using PARAM_VALUE)

• ASOBO_Load_Then_Remove_Parameters_Helper#

  Definition from XML

  <ParametersFn Name=“ASOBO_Load_Then_Remove_Parameters_Helper”> <Parameters Type=“Default”> <REMOVE_#SAVED_PARAMETERS#>True</REMOVE_#SAVED_PARAMETERS#> </Parameters> <Parameters Type=“Override”> <__SAVED_PARAMETERS__ Process=“Param”>#SAVED_PARAMETERS#</__SAVED_PARAMETERS__> </Parameters> <ReturnParameters> <Condition CheckSavedParameters="#__SAVED_PARAMETERS__#"> <LoadParameters ID="#__SAVED_PARAMETERS__#"/> <Condition Valid=“REMOVE_#SAVED_PARAMETERS#"> <RemoveSavedParameters ID=”#__SAVED_PARAMETERS__#"/> </Condition> </Condition> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Default Parameters set:

    • REMOVE_#SAVED_PARAMETERS#

  • Override Parameters set:

    • __SAVED_PARAMETERS__ (using SAVED_PARAMETERS)

  Return parameters:

  Condition: CheckSavedParameters(#__SAVED_PARAMETERS__#)

  • Case: True

    Parameters read:

    • __SAVED_PARAMETERS__

    Condition: Valid(REMOVE_#SAVED_PARAMETERS#)

    • Case: True

      Parameters read:

      • __SAVED_PARAMETERS__

• ASOBO_Save_To_Then_Remove_Parameters_Helper#

  Definition from XML

  <ParametersFn Name=“ASOBO_Save_To_Then_Remove_Parameters_Helper”> <Parameters Type=“Default”> <REMOVE_#SAVED_PARAMETERS#>True</REMOVE_#SAVED_PARAMETERS#> <APPEND>Override</APPEND> </Parameters> <Parameters Type=“Override”> <__SAVED_PARAMETERS__ Process=“Param”>#SAVED_PARAMETERS#</__SAVED_PARAMETERS__> </Parameters> <ReturnParameters> <Condition CheckSavedParameters="#__SAVED_PARAMETERS__#"> <SaveParameters ID="#SAVE_TO#" Append="#APPEND#"> <LoadParameters ID="#__SAVED_PARAMETERS__#"/> </SaveParameters> <Condition Valid=“REMOVE_#SAVED_PARAMETERS#"> <RemoveSavedParameters ID=”#__SAVED_PARAMETERS__#"/> </Condition> </Condition> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Default Parameters set:

    • REMOVE_#SAVED_PARAMETERS#
    • APPEND

  • Override Parameters set:

    • __SAVED_PARAMETERS__ (using SAVED_PARAMETERS)

  Return parameters:

  Condition: CheckSavedParameters(#__SAVED_PARAMETERS__#)

  • Case: True

    Parameters read:

    • SAVE_TO
    • APPEND
    • __SAVED_PARAMETERS__

    Condition: Valid(REMOVE_#SAVED_PARAMETERS#)

    • Case: True

      Parameters read:

      • __SAVED_PARAMETERS__

• ASOBO_Get_MIN_MAX_Ratios_Helper#

  Definition from XML

  <ParametersFn Name=“ASOBO_Get_MIN_MAX_Ratios_Helper”> <Parameters Type=“Override”> <FULL_RANGE Process=“Float”>#MAX_VALUE# #MIN_VALUE# -</FULL_RANGE> <POSITIVE_RANGE Process=“Float”>#MAX_VALUE# 0 -</POSITIVE_RANGE> <NEGATIVE_RANGE Process=“Float”>0 #MIN_VALUE# -</NEGATIVE_RANGE> </Parameters> <Parameters Type=“Override”> <RATIO_POSITIVE Process=“Float”>#POSITIVE_RANGE# #FULL_RANGE# /</RATIO_POSITIVE> <RATIO_NEGATIVE Process=“Float”>#NEGATIVE_RANGE# #FULL_RANGE# /</RATIO_NEGATIVE> </Parameters> <Parameters Type=“Override”> <POSITIVE_TO_NEGATIVE_RATIO Process=“Float”>#RATIO_NEGATIVE# 0 > if{ #RATIO_POSITIVE# #RATIO_NEGATIVE# / } els{ 1 }</POSITIVE_TO_NEGATIVE_RATIO> <NEGATIVE_TO_POSITIVE_RATIO Process=“Float”>#RATIO_POSITIVE# 0 > if{ #RATIO_NEGATIVE# #RATIO_POSITIVE# / } els{ 1 }</NEGATIVE_TO_POSITIVE_RATIO> </Parameters> <ReturnParameters> <FULL_RANGE>#FULL_RANGE#</FULL_RANGE> <POSITIVE_RANGE>#POSITIVE_RANGE#</POSITIVE_RANGE> <NEGATIVE_RANGE>#NEGATIVE_RANGE#</NEGATIVE_RANGE> <RATIO_POSITIVE>#RATIO_POSITIVE#</RATIO_POSITIVE> <RATIO_NEGATIVE>#RATIO_NEGATIVE#</RATIO_NEGATIVE> <POSITIVE_TO_NEGATIVE_RATIO>#POSITIVE_TO_NEGATIVE_RATIO#</POSITIVE_TO_NEGATIVE_RATIO> <NEGATIVE_TO_POSITIVE_RATIO>#NEGATIVE_TO_POSITIVE_RATIO#</NEGATIVE_TO_POSITIVE_RATIO> <MIN_VALUE>#MIN_VALUE#</MIN_VALUE> <MAX_VALUE>#MAX_VALUE#</MAX_VALUE> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Override Parameters set:

    • FULL_RANGE (using MAX_VALUE, MIN_VALUE)
    • POSITIVE_RANGE (using MAX_VALUE)
    • NEGATIVE_RANGE (using MIN_VALUE)

  • Override Parameters set:

    • RATIO_POSITIVE (using POSITIVE_RANGE, FULL_RANGE)
    • RATIO_NEGATIVE (using NEGATIVE_RANGE, FULL_RANGE)

  • Override Parameters set:

    • POSITIVE_TO_NEGATIVE_RATIO (using RATIO_NEGATIVE, RATIO_POSITIVE)
    • NEGATIVE_TO_POSITIVE_RATIO (using RATIO_POSITIVE, RATIO_NEGATIVE)

  Return parameters:

  Parameters set:

  • FULL_RANGE (using FULL_RANGE)
  • POSITIVE_RANGE (using POSITIVE_RANGE)
  • NEGATIVE_RANGE (using NEGATIVE_RANGE)
  • RATIO_POSITIVE (using RATIO_POSITIVE)
  • RATIO_NEGATIVE (using RATIO_NEGATIVE)
  • POSITIVE_TO_NEGATIVE_RATIO (using POSITIVE_TO_NEGATIVE_RATIO)
  • NEGATIVE_TO_POSITIVE_RATIO (using NEGATIVE_TO_POSITIVE_RATIO)
  • MIN_VALUE (using MIN_VALUE)
  • MAX_VALUE (using MAX_VALUE)

• ASOBO_Get_Param_Suffix_Helper#

  Definition from XML

  <ParametersFn Name=“ASOBO_Get_Param_Suffix_Helper”> <Parameters Type=“Default”> <OUT_PARAM_NAME>OUT_PARAM_SUFFIX</OUT_PARAM_NAME> </Parameters> <Parameters Type=“Default”> <Condition Check=“OUT_PARAM_ID”> <True> <OUT_PARAM_SUFFIX>_#OUT_PARAM_ID#</OUT_PARAM_SUFFIX> </True> <False> <OUT_PARAM_SUFFIX/> </False> </Condition> </Parameters> <ReturnParameters> <#OUT_PARAM_NAME#>#OUT_PARAM_SUFFIX#</#OUT_PARAM_NAME#> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Default Parameters set:

    • OUT_PARAM_NAME

  • Default Condition: Check(OUT_PARAM_ID)

    • Case: True

      Parameters set:

      • OUT_PARAM_SUFFIX (using OUT_PARAM_ID)

    • Case: False

      Parameters set:

      • OUT_PARAM_SUFFIX

  Return parameters:

  Parameters set:

  • #OUT_PARAM_NAME# (using OUT_PARAM_SUFFIX)

• ASOBO_Get_Param_Prefix_Helper#

  Definition from XML

  <ParametersFn Name=“ASOBO_Get_Param_Prefix_Helper”> <Parameters Type=“Default”> <Condition Check=“OUT_PARAM_ID”> <True> <OUT_PARAM_PREFIX>#OUT_PARAM_ID#_</OUT_PARAM_PREFIX> </True> <False> <OUT_PARAM_PREFIX/> </False> </Condition> </Parameters> <ReturnParameters> <OUT_PARAM_PREFIX>#OUT_PARAM_PREFIX#</OUT_PARAM_PREFIX> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Default Condition: Check(OUT_PARAM_ID)

    • Case: True

      Parameters set:

      • OUT_PARAM_PREFIX (using OUT_PARAM_ID)

    • Case: False

      Parameters set:

      • OUT_PARAM_PREFIX

  Return parameters:

  Parameters set:

  • OUT_PARAM_PREFIX (using OUT_PARAM_PREFIX)

• ASOBO_Get_Max_Param_Iteration_Helper#

  Definition from XML

  <ParametersFn Name=“ASOBO_Get_Max_Param_Iteration_Helper”> <Parameters Type=“Default”> <MAX_VALUE>-1</MAX_VALUE> <PARAM_PREFIX/> <PARAM_SUFFIX/> <MAX_ITERATION>0</MAX_ITERATION> <OUTGOING_PARAM>OUT_VALUE</OUTGOING_PARAM> </Parameters> <Parameters Type=“Override”> <Loop> <Setup> <Param>CUR_ID</Param> <From>1</From> <Inc>1</Inc> <While> <Not> <Arg Valid=“INFINITE”/> </Not> </While> </Setup> <Do> <SaveParameters ID=“MaxParam_FoundValue”> <FOUND_VALUE>False</FOUND_VALUE> <MAX_ITERATION>#MAX_ITERATION#</MAX_ITERATION> </SaveParameters> <Parameters Type=“Override” Lifetime=“Loop”> <Loop> <Setup> <Param>CUR_PARAM_ID</Param> <From>0</From> <Inc>1</Inc> <While> <Or> <Arg NotEmpty=“PARAM_PREFIX_#CUR_PARAM_ID#”/> <Arg NotEmpty=“PARAM_SUFIX_#CUR_PARAM_ID#”/> </Or> </While> </Setup> <Do> <Parameters Type=“Override” Lifetime=“Iteration”> <PARAM_PREFIX Process=“Param”>PARAM_PREFIX_#CUR_PARAM_ID#</PARAM_PREFIX> <PARAM_SUFIX Process=“Param”>PARAM_SUFIX_#CUR_PARAM_ID#</PARAM_SUFIX> </Parameters> <Parameters Type=“Override” Lifetime=“Iteration”> <PARAM_FINAL Process=“Param”>#PARAM_PREFIX##CUR_ID##PARAM_SUFFIX#</PARAM_FINAL> </Parameters> <Parameters Type=“Override” Lifetime=“Loop”> <Condition NotEmpty=“PARAM_FINAL”> <SaveParameters ID=“MaxParam_FoundValue”> <FOUND_VALUE>True</FOUND_VALUE> <MAX_ITERATION Process=“Int”>#MAX_ITERATION# #CUR_ID# max</MAX_ITERATION> </SaveParameters> </Condition> </Parameters> </Do> </Loop> <LoadParameters ID=“MaxParam_FoundValue”/> <Condition Valid=“FOUND_VALUE”> <False> <Break/> </False> </Condition> </Parameters> </Do> </Loop> <LoadParameters ID=“MaxParam_FoundValue”/> </Parameters> <ReturnParameters> <#OUTGOING_PARAM# Process=“Int”>#MAX_ITERATION#</#OUTGOING_PARAM#> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Default Parameters set:

    • MAX_VALUE
    • PARAM_PREFIX
    • PARAM_SUFFIX
    • MAX_ITERATION
    • OUTGOING_PARAM

  • Override Parameters read:

    • CUR_PARAM_ID

    Parameters set:

    • CUR_ID
    • FOUND_VALUE
    • MAX_ITERATION (using MAX_ITERATION)
    • CUR_PARAM_ID
    • PARAM_PREFIX (using CUR_PARAM_ID)
    • PARAM_SUFIX (using CUR_PARAM_ID)
    • PARAM_FINAL (using PARAM_PREFIX, CUR_ID, PARAM_SUFFIX)

    Condition: NotEmpty(PARAM_FINAL)

    • Case: True

      Parameters set:

      • FOUND_VALUE
      • MAX_ITERATION (using MAX_ITERATION, CUR_ID)

    Condition: Valid(FOUND_VALUE)

    • Case: False

  Return parameters:

  Parameters set:

  • #OUTGOING_PARAM# (using MAX_ITERATION)

• ASOBO_Get_Non_Linear_Animation_Code#

  Definition from XML

  <ParametersFn Name=“ASOBO_Get_Non_Linear_Animation_Code”> <Parameters Type=“Default”> <SELECTION>50</SELECTION> <ANIM_VALUE_0>0</ANIM_VALUE_0> <REF_VALUE_0>0</REF_VALUE_0> <ANIM_VALUE_1>100</ANIM_VALUE_1> <REF_VALUE_1>100</REF_VALUE_1> <ANIM_LENGTH>100</ANIM_LENGTH> <MAX_POINT_INDEX>1</MAX_POINT_INDEX> <MAX_DISPLAYABLE>100</MAX_DISPLAYABLE> <MIN_DISPLAYABLE>0</MIN_DISPLAYABLE> <EXIT_TEMPLATE>ASOBO_GT_Anim_Code</EXIT_TEMPLATE> <EXIT_PARAM_NAME>ANIM_CODE</EXIT_PARAM_NAME> <CONTENT/> </Parameters> <Parameters Type=“Override”> <ANIM_VAL_PREVIOUS_POINT Process=“Param”>ANIM_VALUE_#MAX_POINT_INDEX#</ANIM_VAL_PREVIOUS_POINT> <REF_VAL_PREVIOUS_POINT Process=“Param”>REF_VALUE_#MAX_POINT_INDEX#</REF_VAL_PREVIOUS_POINT> <MAX_POINT_INDEX_MINUS_1 Process=“Param”>#MAX_POINT_INDEX# 1 -</MAX_POINT_INDEX_MINUS_1> </Parameters> <Parameters Type=“Override”> <Loop> <Setup> <Param>NEXT_ID</Param> <From>#MAX_POINT_INDEX#</From> <Inc>-1</Inc> <To>0</To> </Setup> <Do> <Parameters Type=“Override” Lifetime=“Loop”> <ANIM_VAL_CURRENT_POINT Process=“Param”>ANIM_VALUE_#NEXT_ID#</ANIM_VAL_CURRENT_POINT> <REF_VAL_CURRENT_POINT Process=“Param”>REF_VALUE_#NEXT_ID#</REF_VAL_CURRENT_POINT> </Parameters> <Parameters Type=“Override” Lifetime=“Loop”> <CONTENT> #CONTENT# l0 #REF_VAL_CURRENT_POINT# > if{ l0 #REF_VAL_CURRENT_POINT# - #REF_VAL_PREVIOUS_POINT# #REF_VAL_CURRENT_POINT# - / #ANIM_VAL_PREVIOUS_POINT# #ANIM_VAL_CURRENT_POINT# - * #ANIM_VAL_CURRENT_POINT# + sp1 g1 } </CONTENT> <ANIM_VAL_PREVIOUS_POINT Process=“Param”>ANIM_VALUE_#NEXT_ID#</ANIM_VAL_PREVIOUS_POINT> <REF_VAL_PREVIOUS_POINT Process=“Param”>REF_VALUE_#NEXT_ID#</REF_VAL_PREVIOUS_POINT> </Parameters> </Do> <Then> <RETURN_VALUE> #SELECTION# #MAX_DISPLAYABLE# min #MIN_DISPLAYABLE# max sp0 #CONTENT# :1 l1 </RETURN_VALUE> </Then> </Loop> </Parameters> <ReturnParameters> <#EXIT_PARAM_NAME#>#RETURN_VALUE#</#EXIT_PARAM_NAME#> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Default Parameters set:

    • SELECTION
    • ANIM_VALUE_0
    • REF_VALUE_0
    • ANIM_VALUE_1
    • REF_VALUE_1
    • ANIM_LENGTH
    • MAX_POINT_INDEX
    • MAX_DISPLAYABLE
    • MIN_DISPLAYABLE
    • EXIT_TEMPLATE
    • EXIT_PARAM_NAME
    • CONTENT

  • Override Parameters set:

    • ANIM_VAL_PREVIOUS_POINT (using MAX_POINT_INDEX)
    • REF_VAL_PREVIOUS_POINT (using MAX_POINT_INDEX)
    • MAX_POINT_INDEX_MINUS_1 (using MAX_POINT_INDEX)

  • Override Parameters read:

    • MAX_POINT_INDEX

    Parameters set:

    • NEXT_ID
    • ANIM_VAL_CURRENT_POINT (using NEXT_ID)
    • REF_VAL_CURRENT_POINT (using NEXT_ID)
    • CONTENT (using CONTENT, REF_VAL_CURRENT_POINT, REF_VAL_PREVIOUS_POINT, ANIM_VAL_PREVIOUS_POINT, ANIM_VAL_CURRENT_POINT)
    • ANIM_VAL_PREVIOUS_POINT (using NEXT_ID)
    • REF_VAL_PREVIOUS_POINT (using NEXT_ID)
    • RETURN_VALUE (using SELECTION, MAX_DISPLAYABLE, MIN_DISPLAYABLE, CONTENT)

  Return parameters:

  Parameters set:

  • #EXIT_PARAM_NAME# (using RETURN_VALUE)