Handling.xml

[Go back to index]

Asobo_EX1\(Common\)Interior\(Templates\)Handling.xml#

Source XML

<ModelBehaviors> <!– ################################## HANDLING ################################## –> <!– ############################################################################## –> <Include RelativeFile=“Inputs\(Handling_Inputs.xml”/> <Include RelativeFile=“ParametersFn)\(Handling_ParametersFn.xml"/> <Include RelativeFile="SubTemplates\)\Handling_SubTemplates.xml”/> <!– ############################################################################## –> <!– Yoke/Stick –> <!– IN: See ASOBO_IT_HANDLING_Yoke_SubTemplate –> <Template Name=“ASOBO_IT_HANDLING_Single_Yoke_Template”> <TemplateAlias>ASOBO_IT_HANDLING_Stick_Template</TemplateAlias> <TemplateAlias>ASOBO_IT_HANDLING_Single_Stick_Template</TemplateAlias> <Parameters Type=“Default”> <IN_BASE_NAME>HANDLING_YOKE</IN_BASE_NAME> </Parameters> <UseTemplate Name=“ASOBO_IT_HANDLING_Yoke_SubTemplate”/> </Template> <!– IN (opt): NODE_ID/_PILOT/_COPILOT (Yoke node name (for highlights)) –> <Template Name=“ASOBO_IT_HANDLING_Double_Yoke_Template”> <TemplateAlias>ASOBO_IT_HANDLING_Double_Stick_Template</TemplateAlias> <Parameters Type=“Default”> <COMMON_PARAMETERS_1>Pilot</COMMON_PARAMETERS_1> <COMMON_PARAMETERS_2>Copilot</COMMON_PARAMETERS_2> </Parameters> <Parameters Type=“Override”> <SaveParameters ID=“Common_Parameters_Yoke_#COMMON_PARAMETERS_2#” Append=“Default”> <PART_ID_ONLY>True</PART_ID_ONLY> </SaveParameters> </Parameters> <UseTemplate Name=“ASOBO_Double_Template_Helper”> <TEMPLATE>ASOBO_IT_HANDLING_Single_Yoke_Template</TEMPLATE> <COMMON_PARAMETERS_PREFIX>Common_Parameters_Yoke</COMMON_PARAMETERS_PREFIX> </UseTemplate> </Template> <!– ############################################################################## –> <!– Rudder pedals –> <!– IN: See ASOBO_IT_HANDLING_Rudder_Pedals_SubTemplate –> <Template Name=“ASOBO_IT_HANDLING_Single_Rudder_Pedals_Template”> <TemplateAlias>ASOBO_IT_HANDLING_Rudder_Pedals_Template</TemplateAlias> <Parameters Type=“Default”> <IN_BASE_NAME>HANDLING_RUDDER_PEDALS</IN_BASE_NAME> <GET_COMMON_PARAMETERS_FN>ASOBO_Rudder_Pedals_Common_Parameters</GET_COMMON_PARAMETERS_FN> </Parameters> <UseTemplate Name=“ASOBO_IT_HANDLING_Rudder_Pedals_SubTemplate”/> </Template> <!– IN (opt): NODE_ID_LEFT/_PILOT/_COPILOT (Left rudder node name) –> <!– IN (opt): NODE_ID_RIGHT/_PILOT/_COPILOT (Right rudder node name) –> <Template Name=“ASOBO_IT_HANDLING_Double_Rudder_Pedals_Template”> <Parameters Type=“Default”> <COMMON_PARAMETERS_1>Pilot</COMMON_PARAMETERS_1> <COMMON_PARAMETERS_2>Copilot</COMMON_PARAMETERS_2> </Parameters> <Parameters Type=“Override”> <SaveParameters ID=“Common_Parameters_Rudder_Pedals_#COMMON_PARAMETERS_2#” Append=“Default”> <PART_ID_ONLY>True</PART_ID_ONLY> </SaveParameters> </Parameters> <UseTemplate Name=“ASOBO_Double_Template_Helper”> <TEMPLATE>ASOBO_IT_HANDLING_Rudder_Pedals_Template</TEMPLATE> <COMMON_PARAMETERS_PREFIX>Common_Parameters_Rudder_Pedals</COMMON_PARAMETERS_PREFIX> </UseTemplate> </Template> <!– ############################################################################## –> <Template Name=“ASOBO_IT_HANDLING_Double_Helicraft_Rudder_Pedals_Template”> <UseTemplate Name=“ASOBO_IT_HANDLING_Double_Rudder_Pedals_Template”> <SIMVAR_RUDDER_PEDALS>TAIL ROTOR PEDAL POSITION</SIMVAR_RUDDER_PEDALS> </UseTemplate> </Template> <!– ############################################################################## –> <!– IN: See ASOBO_IT_HANDLING_Brakes_Animation_SubTemplate –> <Template Name=“ASOBO_IT_HANDLING_Brakes_Animation_Template”> <UseTemplate Name=“ASOBO_IT_HANDLING_Brakes_Animation_SubTemplate”/> </Template> <!– ############################################################################## –> <Template Name=“ASOBO_IT_HANDLING_Elevator_Trim_Indicator_Template”> <UseTemplate Name=“ASOBO_IT_HANDLING_Trim_Indicator_SubTemplate”> <TRIM_TYPE>ELEVATOR</TRIM_TYPE> </UseTemplate> </Template> <Template Name=“ASOBO_IT_HANDLING_Aileron_Trim_Indicator_Template”> <UseTemplate Name=“ASOBO_IT_HANDLING_Trim_Indicator_SubTemplate”> <TRIM_TYPE>AILERON</TRIM_TYPE> </UseTemplate> </Template> <Template Name=“ASOBO_IT_HANDLING_Rudder_Trim_Indicator_Template”> <UseTemplate Name=“ASOBO_IT_HANDLING_Trim_Indicator_SubTemplate”> <TRIM_TYPE>RUDDER</TRIM_TYPE> </UseTemplate> </Template> <!– ############################################################################## –> <!– IN: See ASOBO_IT_HANDLING_Tiller_SubTemplate –> <Template Name=“ASOBO_IT_HANDLING_Tiller_Template”> <UseTemplate Name=“ASOBO_IT_HANDLING_Tiller_SubTemplate”/> </Template> <!– ############################################################################## –> <!– IN: PFN_GET_PARAMETERS –> <Template Name=“ASOBO_IT_HANDLING_Interaction_Template”> <UseTemplate Name=“ASOBO_Interaction_Template”> <IE_TYPE>HANDLING</IE_TYPE> </UseTemplate> </Template> <!– ############################################################################## –> </ModelBehaviors>

Includes#

• RelativeFile: Inputs\\Handling_Inputs.xml
• RelativeFile: ParametersFn\\Handling_ParametersFn.xml
• RelativeFile: SubTemplates\\Handling_SubTemplates.xml

Templates#

Template list

1. ASOBO_IT_HANDLING_Single_Yoke_Template \[ASOBO\_IT\_HANDLING\_Stick\_Template, ASOBO\_IT\_HANDLING\_Single\_Stick\_Template\]
2. ASOBO_IT_HANDLING_Double_Yoke_Template \[ASOBO\_IT\_HANDLING\_Double\_Stick\_Template\]
3. ASOBO_IT_HANDLING_Single_Rudder_Pedals_Template \[ASOBO\_IT\_HANDLING\_Rudder\_Pedals\_Template\]
4. ASOBO_IT_HANDLING_Double_Rudder_Pedals_Template
5. ASOBO_IT_HANDLING_Double_Helicraft_Rudder_Pedals_Template
6. ASOBO_IT_HANDLING_Brakes_Animation_Template
7. ASOBO_IT_HANDLING_Elevator_Trim_Indicator_Template
8. ASOBO_IT_HANDLING_Aileron_Trim_Indicator_Template
9. ASOBO_IT_HANDLING_Rudder_Trim_Indicator_Template
10. ASOBO_IT_HANDLING_Tiller_Template
11. ASOBO_IT_HANDLING_Interaction_Template

• ASOBO_IT_HANDLING_Single_Yoke_Template \[ASOBO\_IT\_HANDLING\_Stick\_Template, ASOBO\_IT\_HANDLING\_Single\_Stick\_Template\]#

  Definition from XML

  <Template Name=“ASOBO_IT_HANDLING_Single_Yoke_Template”> <TemplateAlias>ASOBO_IT_HANDLING_Stick_Template</TemplateAlias> <TemplateAlias>ASOBO_IT_HANDLING_Single_Stick_Template</TemplateAlias> <Parameters Type=“Default”> <IN_BASE_NAME>HANDLING_YOKE</IN_BASE_NAME> </Parameters> <UseTemplate Name=“ASOBO_IT_HANDLING_Yoke_SubTemplate”/> </Template>

  Parameters initialization:

  • Default Parameters set:

    • IN_BASE_NAME

   

  Templates used:

  • ASOBO_IT_HANDLING_Yoke_SubTemplate

  [Go back to top] [Go back to index]

• ASOBO_IT_HANDLING_Double_Yoke_Template \[ASOBO\_IT\_HANDLING\_Double\_Stick\_Template\]#

  Definition from XML

  <Template Name=“ASOBO_IT_HANDLING_Double_Yoke_Template”> <TemplateAlias>ASOBO_IT_HANDLING_Double_Stick_Template</TemplateAlias> <Parameters Type=“Default”> <COMMON_PARAMETERS_1>Pilot</COMMON_PARAMETERS_1> <COMMON_PARAMETERS_2>Copilot</COMMON_PARAMETERS_2> </Parameters> <Parameters Type=“Override”> <SaveParameters ID=“Common_Parameters_Yoke_#COMMON_PARAMETERS_2#” Append=“Default”> <PART_ID_ONLY>True</PART_ID_ONLY> </SaveParameters> </Parameters> <UseTemplate Name=“ASOBO_Double_Template_Helper”> <TEMPLATE>ASOBO_IT_HANDLING_Single_Yoke_Template</TEMPLATE> <COMMON_PARAMETERS_PREFIX>Common_Parameters_Yoke</COMMON_PARAMETERS_PREFIX> </UseTemplate> </Template>

  Parameters initialization:

  • Default Parameters set:

    • COMMON_PARAMETERS_1
    • COMMON_PARAMETERS_2

  • Override Parameters read:

    • COMMON_PARAMETERS_2

    Parameters set:

    • PART_ID_ONLY

   

  Templates used:

  • ASOBO_Double_Template_Helper Parameters set:

    • TEMPLATE
    • COMMON_PARAMETERS_PREFIX

  [Go back to top] [Go back to index]

• ASOBO_IT_HANDLING_Single_Rudder_Pedals_Template \[ASOBO\_IT\_HANDLING\_Rudder\_Pedals\_Template\]#

  Definition from XML

  <Template Name=“ASOBO_IT_HANDLING_Single_Rudder_Pedals_Template”> <TemplateAlias>ASOBO_IT_HANDLING_Rudder_Pedals_Template</TemplateAlias> <Parameters Type=“Default”> <IN_BASE_NAME>HANDLING_RUDDER_PEDALS</IN_BASE_NAME> <GET_COMMON_PARAMETERS_FN>ASOBO_Rudder_Pedals_Common_Parameters</GET_COMMON_PARAMETERS_FN> </Parameters> <UseTemplate Name=“ASOBO_IT_HANDLING_Rudder_Pedals_SubTemplate”/> </Template>

  Parameters initialization:

  • Default Parameters set:

    • IN_BASE_NAME
    • GET_COMMON_PARAMETERS_FN

   

  Templates used:

  • ASOBO_IT_HANDLING_Rudder_Pedals_SubTemplate

  [Go back to top] [Go back to index]

• ASOBO_IT_HANDLING_Double_Rudder_Pedals_Template#

  Definition from XML

  <Template Name=“ASOBO_IT_HANDLING_Double_Rudder_Pedals_Template”> <Parameters Type=“Default”> <COMMON_PARAMETERS_1>Pilot</COMMON_PARAMETERS_1> <COMMON_PARAMETERS_2>Copilot</COMMON_PARAMETERS_2> </Parameters> <Parameters Type=“Override”> <SaveParameters ID=“Common_Parameters_Rudder_Pedals_#COMMON_PARAMETERS_2#” Append=“Default”> <PART_ID_ONLY>True</PART_ID_ONLY> </SaveParameters> </Parameters> <UseTemplate Name=“ASOBO_Double_Template_Helper”> <TEMPLATE>ASOBO_IT_HANDLING_Rudder_Pedals_Template</TEMPLATE> <COMMON_PARAMETERS_PREFIX>Common_Parameters_Rudder_Pedals</COMMON_PARAMETERS_PREFIX> </UseTemplate> </Template>

  Parameters initialization:

  • Default Parameters set:

    • COMMON_PARAMETERS_1
    • COMMON_PARAMETERS_2

  • Override Parameters read:

    • COMMON_PARAMETERS_2

    Parameters set:

    • PART_ID_ONLY

   

  Templates used:

  • ASOBO_Double_Template_Helper Parameters set:

    • TEMPLATE
    • COMMON_PARAMETERS_PREFIX

  [Go back to top] [Go back to index]

• ASOBO_IT_HANDLING_Double_Helicraft_Rudder_Pedals_Template#

  Definition from XML

  <Template Name=“ASOBO_IT_HANDLING_Double_Helicraft_Rudder_Pedals_Template”> <UseTemplate Name=“ASOBO_IT_HANDLING_Double_Rudder_Pedals_Template”> <SIMVAR_RUDDER_PEDALS>TAIL ROTOR PEDAL POSITION</SIMVAR_RUDDER_PEDALS> </UseTemplate> </Template>

   

  Templates used:

  • ASOBO_IT_HANDLING_Double_Rudder_Pedals_Template Parameters set:

    • SIMVAR_RUDDER_PEDALS

  [Go back to top] [Go back to index]

• ASOBO_IT_HANDLING_Brakes_Animation_Template#

  Definition from XML

  <Template Name=“ASOBO_IT_HANDLING_Brakes_Animation_Template”> <UseTemplate Name=“ASOBO_IT_HANDLING_Brakes_Animation_SubTemplate”/> </Template>

   

  Templates used:

  • ASOBO_IT_HANDLING_Brakes_Animation_SubTemplate

  [Go back to top] [Go back to index]

• ASOBO_IT_HANDLING_Elevator_Trim_Indicator_Template#

  Definition from XML

  <Template Name=“ASOBO_IT_HANDLING_Elevator_Trim_Indicator_Template”> <UseTemplate Name=“ASOBO_IT_HANDLING_Trim_Indicator_SubTemplate”> <TRIM_TYPE>ELEVATOR</TRIM_TYPE> </UseTemplate> </Template>

   

  Templates used:

  • ASOBO_IT_HANDLING_Trim_Indicator_SubTemplate Parameters set:

    • TRIM_TYPE

  [Go back to top] [Go back to index]

• ASOBO_IT_HANDLING_Aileron_Trim_Indicator_Template#

  Definition from XML

  <Template Name=“ASOBO_IT_HANDLING_Aileron_Trim_Indicator_Template”> <UseTemplate Name=“ASOBO_IT_HANDLING_Trim_Indicator_SubTemplate”> <TRIM_TYPE>AILERON</TRIM_TYPE> </UseTemplate> </Template>

   

  Templates used:

  • ASOBO_IT_HANDLING_Trim_Indicator_SubTemplate Parameters set:

    • TRIM_TYPE

  [Go back to top] [Go back to index]

• ASOBO_IT_HANDLING_Rudder_Trim_Indicator_Template#

  Definition from XML

  <Template Name=“ASOBO_IT_HANDLING_Rudder_Trim_Indicator_Template”> <UseTemplate Name=“ASOBO_IT_HANDLING_Trim_Indicator_SubTemplate”> <TRIM_TYPE>RUDDER</TRIM_TYPE> </UseTemplate> </Template>

   

  Templates used:

  • ASOBO_IT_HANDLING_Trim_Indicator_SubTemplate Parameters set:

    • TRIM_TYPE

  [Go back to top] [Go back to index]

• ASOBO_IT_HANDLING_Tiller_Template#

  Definition from XML

  <Template Name=“ASOBO_IT_HANDLING_Tiller_Template”> <UseTemplate Name=“ASOBO_IT_HANDLING_Tiller_SubTemplate”/> </Template>

   

  Templates used:

  • ASOBO_IT_HANDLING_Tiller_SubTemplate

  [Go back to top] [Go back to index]

• ASOBO_IT_HANDLING_Interaction_Template#

  Definition from XML

  <Template Name=“ASOBO_IT_HANDLING_Interaction_Template”> <UseTemplate Name=“ASOBO_Interaction_Template”> <IE_TYPE>HANDLING</IE_TYPE> </UseTemplate> </Template>

   

  Templates used:

  • ASOBO_Interaction_Template Parameters set:

    • IE_TYPE

  [Go back to top] [Go back to index]