MSFS SDK Documentation Logo
Flighting
  • SDK Documentation

Handling.xml

[Go back to index]

Asobo\(Common\)Handling.xml

Source XML

<ModelBehaviors> <Include RelativeFile=“Subtemplates\(Handling_Subtemplates.xml”/> <Include RelativeFile=“Inputs)\Handling_Inputs.xml”/> <!– ################################## HANDLING ################################## –> <!– ############################################################################## –> <!– Yoke that cannot be hidden –> <!– NODE_ID: Node that should be highlighted during checklist optional: CREATE_TWO_NODES: create both yoke nodes and there respective highlight NODE_ID2: other Node that should be highlighted during checklist (ex: copilot yoke) –> <Template Name=“ASOBO_HANDLING_Yoke_Template”> <Parameters Type=“Default”> <ID>1</ID> </Parameters> <UseTemplate Name=“ASOBO_HANDLING_Yoke_SubTemplate”/> </Template> <!– Yoke that can be hidden –> <!– NODE_ID: root node of Yoke and decorative elements (ex: cables, buttons) YOKE_NODE_ID: Node that should be highlighted during checklist YOKE_HIDER_NODE_ID: Node that is used to toggle the visibility of the yoke (often the base of the yoke, never the yoke itself) by default (without any option) also create the animations for both yokes, - to create additional yokes (ex: copilot yoke) use the option ONLY_HIDEABLE (this will also make it highlightable) - to hide unwanted features taht are not parented to the Yoke itself use the option ONLY_DECORATIVE subTemplate relevant options: CREATE_TWO_NODES: create both yoke nodes and there respective highlight in the same template NODE_ID2: other Node that should be highlighted during checklist (ex: copilot yoke) –> <Template Name=“ASOBO_HANDLING_Yoke_Hideable_Template”> <Parameters Type=“Default”> <ID>1</ID> </Parameters> <UseTemplate Name=“ASOBO_HANDLING_Yoke_Hideable_SubTemplate”/> </Template> <Template Name=“ASOBO_HANDLING_Timer_Template”> <UseTemplate Name=“ASOBO_HANDLING_Timer_SubTemplate”/> </Template> <Template Name=“ASOBO_HANDLING_Push_Timer_Template”> <UseTemplate Name=“ASOBO_HANDLING_Timer_Template”> <INTERACTION_TYPE>Push</INTERACTION_TYPE> </UseTemplate> </Template> <Template Name=“ASOBO_HANDLING_StormClear_Template”> <UseTemplate Name=“ASOBO_HANDLING_StormClear_SubTemplate”/> </Template> <Template Name=“ASOBO_HANDLING_Push_StormClear_Template”> <UseTemplate Name=“ASOBO_HANDLING_StormClear_Template”> <INTERACTION_TYPE>Push</INTERACTION_TYPE> </UseTemplate> </Template> <Template Name=“ASOBO_HANDLING_CWS_Template”> <UseTemplate Name=“ASOBO_HANDLING_CWS_SubTemplate”/> </Template> <Template Name=“ASOBO_HANDLING_Push_CWS_Template”> <UseTemplate Name=“ASOBO_HANDLING_CWS_Template”> <INTERACTION_TYPE>Push</INTERACTION_TYPE> </UseTemplate> </Template> <Template Name=“ASOBO_HANDLING_Ident_Template”> <Parameters Type=“Default”> <ID>1</ID> </Parameters> <UseTemplate Name=“ASOBO_HANDLING_Ident_SubTemplate”/> </Template> <Template Name=“ASOBO_HANDLING_Push_Ident_Template”> <UseTemplate Name=“ASOBO_HANDLING_Ident_Template”> <INTERACTION_TYPE>Push</INTERACTION_TYPE> </UseTemplate> </Template> <Template Name=“ASOBO_HANDLING_Swap_Template”> <Parameters Type=“Default”> <ID>1</ID> </Parameters> <UseTemplate Name=“ASOBO_HANDLING_Swap_SubTemplate”/> </Template> <Template Name=“ASOBO_HANDLING_Push_Swap_Template”> <UseTemplate Name=“ASOBO_HANDLING_Swap_Template”> <INTERACTION_TYPE>Push</INTERACTION_TYPE> </UseTemplate> </Template> <Template Name=“ASOBO_HANDLING_AP_Trim_Disc_Template”> <Parameters Type=“Default”> <ID>1</ID> </Parameters> <UseTemplate Name=“ASOBO_HANDLING_AP_Trim_Disc_SubTemplate”/> </Template> <Template Name=“ASOBO_HANDLING_Push_AP_Trim_Disc_Template”> <UseTemplate Name=“ASOBO_HANDLING_AP_Trim_Disc_Template”> <INTERACTION_TYPE>PUSH</INTERACTION_TYPE> </UseTemplate> </Template> <Template Name=“ASOBO_HANDLING_Switch_AP_Trim_Disc_Template”> <UseTemplate Name=“ASOBO_HANDLING_AP_Trim_Disc_Template”> <INTERACTION_TYPE>SWITCH</INTERACTION_TYPE> </UseTemplate> </Template> <Template Name=“ASOBO_HANDLING_Steering_Tiller_Template”> <Parameters Type=“Default”> <ID>1</ID> </Parameters> <UseTemplate Name=“ASOBO_HANDLING_Steering_Tiller_SubTemplate”/> </Template> <Template Name=“ASOBO_HANDLING_Switch_ElevatorTrim_Template”> <UseTemplate Name=“ASOBO_HANDLING_ElevatorTrim_Template”> <INTERACTION_TYPE>SWITCH</INTERACTION_TYPE> </UseTemplate> </Template> <Template Name=“ASOBO_HANDLING_Wheel_ElevatorTrim_Template”> <UseTemplate Name=“ASOBO_HANDLING_ElevatorTrim_Template”> <INTERACTION_TYPE>WHEEL</INTERACTION_TYPE> </UseTemplate> </Template> <Template Name=“ASOBO_HANDLING_Secondary_Trim_Available_Template”> <UseTemplate Name=“ASOBO_HANDLING_Secondary_Trim_Available_SubTemplate”/> </Template> <Template Name=“ASOBO_HANDLING_Push_Secondary_ElevatorTrim_Available_Template”> <UseTemplate Name=“ASOBO_HANDLING_Secondary_Trim_Available_Template”> <INTERACTION_TYPE>Push</INTERACTION_TYPE> <TRIM_NAME>Elevator</TRIM_NAME> </UseTemplate> </Template> <Template Name=“ASOBO_HANDLING_Joystick_YawPitch_Template”> <Parameters Type=“Default”> <ID>1</ID> </Parameters> <UseTemplate Name=“ASOBO_HANDLING_Joystick_YawPitch_SubTemplate”/> </Template> <Template Name=“ASOBO_HANDLING_AntiSkid_Template”> <UseTemplate Name=“ASOBO_HANDLING_AntiSkid_SubTemplate”/> </Template> <Template Name=“ASOBO_HANDLING_Switch_AntiSkid_Template”> <UseTemplate Name=“ASOBO_HANDLING_AntiSkid_Template”> <INTERACTION_TYPE>Switch</INTERACTION_TYPE> </UseTemplate> </Template> <Template Name=“ASOBO_HANDLING_GLimiter_Template”> <UseTemplate Name=“ASOBO_HANDLING_GLimiter_SubTemplate”/> </Template> <Template Name=“ASOBO_HANDLING_Push_GLimiter_Template”> <UseTemplate Name=“ASOBO_HANDLING_GLimiter_Template”> <INTERACTION_TYPE>Push</INTERACTION_TYPE> </UseTemplate> </Template> <Template Name=“ASOBO_HANDLING_Switch_GLimiter_Template”> <UseTemplate Name=“ASOBO_HANDLING_GLimiter_Template”> <INTERACTION_TYPE>Switch</INTERACTION_TYPE> </UseTemplate> </Template> <!– InertSep –> <Template name=“ASOBO_HANDLING_InertSep_Template”> <UseTemplate Name=“ASOBO_HANDLING_InertSep_SubTemplate”/> </Template> <Template name=“ASOBO_HANDLING_Lever_InertSep_Template”> <UseTemplate Name=“ASOBO_HANDLING_InertSep_Template”> <INTERACTION_TYPE>Lever</INTERACTION_TYPE> </UseTemplate> </Template> <!– Rudder trim –> <Template Name=“ASOBO_HANDLING_Knob_RudderTrim_Template”> <UseTemplate Name=“ASOBO_HANDLING_RudderTrim_Template”> <INTERACTION_TYPE>KNOB</INTERACTION_TYPE> </UseTemplate> </Template> <Template Name=“ASOBO_HANDLING_Switch_RudderTrim_Template”> <UseTemplate Name=“ASOBO_HANDLING_RudderTrim_Template”> <INTERACTION_TYPE>SWITCH</INTERACTION_TYPE> </UseTemplate> </Template> <Template Name=“ASOBO_HANDLING_Wheel_RudderTrim_Template”> <UseTemplate Name=“ASOBO_HANDLING_RudderTrim_Template”> <INTERACTION_TYPE>WHEEL</INTERACTION_TYPE> </UseTemplate> </Template> <!– Rudder pedals –> <Template Name=“ASOBO_HANDLING_RudderPedals_Template”> <Parameters Type=“Default”> <ID>1</ID> <Condition Check=“SPLIT_RUDDERS”> <True> <RUDDERPEDALS_TYPE>SPLITTED</RUDDERPEDALS_TYPE> </True> </Condition> <!– <DIFFERENTIATE_BRAKE_ANIM_L_R>True</DIFFERENTIATE_BRAKE_ANIM_L_R> –> </Parameters> <UseTemplate Name=“ASOBO_HANDLING_RudderPedals_SubTemplate”> </UseTemplate> </Template> <Template Name=“ASOBO_HANDLING_RudderPedals_Brake_Template”> <Parameters Type=“Default”> <ANIM_LENGTH>100</ANIM_LENGTH> <ANIM_NAME_L>HANDLING_RudderPedals_Brake_L</ANIM_NAME_L> <ANIM_NAME_R>HANDLING_RudderPedals_Brake_R</ANIM_NAME_R> </Parameters> <Parameters Type=“Override”> <Condition Valid=“DONT_BRAKE_ON_PARKINGBRAKE”> <True> <SIMVAR_END> EX1</SIMVAR_END> </True> <False> <SIMVAR_END/> </False> </Condition> </Parameters> <Condition Valid=“DIFFERENTIATE_BRAKE_ANIM_L_R”> <True> <UseTemplate Name=“ASOBO_GT_Anim_Sim”> <ANIM_NAME>#ANIM_NAME_L#</ANIM_NAME> <ANIM_SIMVAR>BRAKE LEFT POSITION#SIMVAR_END#</ANIM_SIMVAR> <ANIM_SIMVAR_UNITS>percent</ANIM_SIMVAR_UNITS> </UseTemplate> <UseTemplate Name=“ASOBO_GT_Anim_Sim”> <ANIM_NAME>#ANIM_NAME_R#</ANIM_NAME> <ANIM_SIMVAR>BRAKE RIGHT POSITION#SIMVAR_END#</ANIM_SIMVAR> <ANIM_SIMVAR_UNITS>percent</ANIM_SIMVAR_UNITS> </UseTemplate> </True> <False> <UseTemplate Name=“ASOBO_GT_Anim_Sim”> <ANIM_SIMVAR>BRAKE LEFT POSITION#SIMVAR_END#</ANIM_SIMVAR> <ANIM_SIMVAR_UNITS>percent</ANIM_SIMVAR_UNITS> </UseTemplate> </False> </Condition> </Template> <Template Name=“ASOBO_HANDLING_Autobrakes_Template”> <Parameters Type=“Default”> <ID>1</ID> </Parameters> <UseTemplate Name=“ASOBO_HANDLING_Autobrakes_SubTemplate”/> </Template> <Template Name=“ASOBO_HANDLING_Push_Autobrakes_Template”> <UseTemplate Name=“ASOBO_HANDLING_Autobrakes_Template”> <INTERACTION_TYPE>Push</INTERACTION_TYPE> </UseTemplate> </Template> <Template Name=“ASOBO_HANDLING_Knob_Autobrakes_Template”> <UseTemplate Name=“ASOBO_HANDLING_Autobrakes_Template”> <INTERACTION_TYPE>Knob</INTERACTION_TYPE> </UseTemplate> </Template> <Template Name=“ASOBO_HANDLING_Indicator_ElevatorTrim_Template”> <Parameters Type=“Default”> <ANIM_NAME>HANDLING_Indicator_ElevatorTrim</ANIM_NAME> </Parameters> <Switch> <Case Check=“REF_VALUE_0”> <UseTemplate Name=“ASOBO_GT_Helper_Non_Linear_Animation_Code”> <SELECTION>(A:ELEVATOR TRIM POSITION, degrees)</SELECTION> </UseTemplate> </Case> <Case Check=“DISCRETE_STATES”> <UseTemplate Name=“ASOBO_GT_Anim_Code”> <ANIM_CODE>(A:ELEVATOR TRIM PCT, Percent) 100 + 200 / #DISCRETE_STATES# * near</ANIM_CODE> <ANIM_LENGTH>#DISCRETE_STATES#</ANIM_LENGTH> </UseTemplate> </Case> <Case Check=“ANIM_CODE”> <UseTemplate Name=“ASOBO_GT_Anim_Code”/> </Case> <Default> <UseTemplate Name=“ASOBO_GT_Anim_Sim”> <ANIM_LENGTH>200</ANIM_LENGTH> <ANIM_SIMVAR>ELEVATOR TRIM PCT</ANIM_SIMVAR> <ANIM_SIMVAR_UNITS>percent</ANIM_SIMVAR_UNITS> <!–

\[-100, 100\]

–> <ANIM_SIMVAR_BIAS>100</ANIM_SIMVAR_BIAS> <!–

\[-100, 100\]

+ 100 =>

\[0, 200\]

–> </UseTemplate> </Default> </Switch> </Template> <Template Name=“ASOBO_HANDLING_AutoSpoiler_Template”> <UseTemplate Name=“ASOBO_HANDLING_AutoSpoiler_SubTemplate”/> </Template> <Template Name=“ASOBO_HANDLING_Push_AutoSpoiler_Template”> <UseTemplate Name=“ASOBO_HANDLING_AutoSpoiler_Template”> <INTERACTION_TYPE>Push</INTERACTION_TYPE> </UseTemplate> </Template> <Template Name=“ASOBO_HANDLING_Spoilers_Int_Template”> <UseTemplate Name=“ASOBO_HANDLING_Spoilers_Int_SubTemplate”/> </Template> <Template Name=“ASOBO_HANDLING_Switch_Spoiler_Template”> <UseTemplate Name=“ASOBO_HANDLING_Spoilers_Int_Template”> <INTERACTION_TYPE>Switch</INTERACTION_TYPE> </UseTemplate> </Template> <Template Name=“ASOBO_HANDLING_Lever_Spoilers_Template”> <UseTemplate Name=“ASOBO_HANDLING_Spoilers_Int_Template”> <INTERACTION_TYPE>Lever</INTERACTION_TYPE> </UseTemplate> </Template> <Template Name=“ASOBO_HANDLING_Lever_Flaps_Template”> <UseTemplate Name=“ASOBO_HANDLING_Flaps_SubTemplate”> <INTERACTION_TYPE>Lever</INTERACTION_TYPE> </UseTemplate> </Template> <Template Name=“ASOBO_HANDLING_Lever_Flaps_Continuous_Template”> <UseTemplate Name=“ASOBO_HANDLING_Flaps_SubTemplate”> <INTERACTION_TYPE>Lever</INTERACTION_TYPE> <IS_CONTINUOUS>True</IS_CONTINUOUS> </UseTemplate> </Template> <!– Require SELECTED_FLAPS_DEGREE (default 0) and MAX_FLAPS_DEGREE (default 45) –> <Template Name=“ASOBO_HANDLING_Button_Flaps_Template”> <UseTemplate Name=“ASOBO_HANDLING_Flaps_SubTemplate”> <INTERACTION_TYPE>Push</INTERACTION_TYPE> </UseTemplate> </Template> <Template Name=“ASOBO_HANDLING_Lever_With_Button_Flaps_Template”> <UseTemplate Name=“ASOBO_HANDLING_Flaps_SubTemplate”> <INTERACTION_TYPE>Lever</INTERACTION_TYPE> <HAS_BUTTON>True</HAS_BUTTON> </UseTemplate> </Template> <Template Name=“ASOBO_HANDLING_Indicator_Flaps_Template”> <Parameters Type=“Default”> <ANIM_NAME>HANDLING_Indicator_Flaps</ANIM_NAME> <NODE_ID>HANDLING_Indicator_Flaps</NODE_ID> <PART_ID>HANDLING_Indicator_Flaps</PART_ID> </Parameters> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <UseTemplate Name=“ASOBO_GT_Anim_Sim”> <ANIM_LENGTH>100</ANIM_LENGTH> <ANIM_SIMVAR>TRAILING EDGE FLAPS LEFT PERCENT</ANIM_SIMVAR> <ANIM_SIMVAR_UNITS>percent</ANIM_SIMVAR_UNITS> </UseTemplate> </Component> </Template> <Template Name=“ASOBO_HANDLING_Switch_AerobaticsTrimFlaps_Template”> <UseTemplate Name=“ASOBO_HANDLING_Switch_AerobaticsTrimFlaps_SubTemplate”/> </Template> <Template Name=“ASOBO_HANDLING_Switch_AileronTrim_Template”> <UseTemplate Name=“ASOBO_HANDLING_AileronTrim_Template”> <INTERACTION_TYPE>SWITCH</INTERACTION_TYPE> </UseTemplate> </Template> <Template Name=“ASOBO_HANDLING_Knob_AileronTrim_Template”> <UseTemplate Name=“ASOBO_HANDLING_AileronTrim_Template”> <INTERACTION_TYPE>KNOB</INTERACTION_TYPE> </UseTemplate> </Template> <!– Light up when elevator trim is near 0% –> <Template Name=“ASOBO_HANDLING_Light_ElevatorTrim_Template”> <Parameters Type=“Default”> <NODE_ID>HANDLING_Light_ElevatorTrim</NODE_ID> <TRIM_TYPE>ELEVATOR</TRIM_TYPE> </Parameters> <UseTemplate Name=“ASOBO_HANDLING_Light_Trim_Subtemplate”/> </Template> <!– Light up when rudder trim is near 0% –> <Template Name=“ASOBO_HANDLING_Light_RudderTrim_Template”> <Parameters Type=“Default”> <NODE_ID>HANDLING_Light_RudderTrim</NODE_ID> <TRIM_TYPE>RUDDER</TRIM_TYPE> </Parameters> <UseTemplate Name=“ASOBO_HANDLING_Light_Trim_Subtemplate”/> </Template> <!– Light up when aileron trim is near 0% –> <Template Name=“ASOBO_HANDLING_Light_AileronTrim_Template”> <Parameters Type=“Default”> <NODE_ID>HANDLING_Light_AileronTrim</NODE_ID> <TRIM_TYPE>AILERON</TRIM_TYPE> </Parameters> <UseTemplate Name=“ASOBO_HANDLING_Light_Trim_Subtemplate”/> </Template> <!– Trim combination in a switch –> <Template Name=“ASOBO_HANDLING_Combined_Trim_Template”> <UseTemplate Name=“ASOBO_HANDLING_Combined_Trim_SubTemplate”> <INTERACTION_TYPE>Joystick</INTERACTION_TYPE> </UseTemplate> </Template> <Template Name=“ASOBO_HANDLING_Elevator_Aileron_Trim_Template”> <UseTemplate Name=“ASOBO_HANDLING_Combined_Trim_Template”> <UP_DN_TRIM_TYPE>ELEVATOR</UP_DN_TRIM_TYPE> <L_R_TRIM_TYPE>AILERON</L_R_TRIM_TYPE> </UseTemplate> </Template> <Template Name=“ASOBO_HANDLING_Longitudinal_Lateral_Trim_Template”> <UseTemplate Name=“ASOBO_HANDLING_Combined_Trim_Template”> <UP_DN_TRIM_TYPE>LONGITUDINAL</UP_DN_TRIM_TYPE> <L_R_TRIM_TYPE>LATERAL</L_R_TRIM_TYPE> </UseTemplate> </Template> <!– With default use case, you can set TARGET_ANGLE_DEGREE: will light up when flaps reach this degree (default 0) VALUE_RANGE: increase degree range for degree lighting (default 0.1) –> <Template Name=“ASOBO_HANDLING_Light_Flaps_Template”> <Parameters Type=“Default”> <ID>1</ID> <MAX_FLAPS_INDEX>(A:FLAPS NUM HANDLE POSITIONS, Number)</MAX_FLAPS_INDEX> </Parameters> <UseTemplate Name=“ASOBO_HANDLING_Light_Flaps_SubTemplate”/> </Template> <Template Name=“ASOBO_HANDLING_Light_Flaps_Transit_Template”> <Parameters Type=“Default”> <NODE_ID>HANDLING_Light_Flaps_#ID#</NODE_ID> </Parameters> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <UseTemplate Name=“ASOBO_GT_Emissive_Gauge”> <EMISSIVE_CODE>(A:CIRCUIT FLAP MOTOR ON, Bool)</EMISSIVE_CODE> </UseTemplate> </Component> </Template> <Template Name=“ASOBO_HANDLING_Water_Rudder_Controller_Template”> <UseTemplate Name=“ASOBO_HANDLING_Water_Rudder_Controller_SubTemplate”/> </Template> <Template Name=“ASOBO_HANDLING_Switch_Water_Rudder_Template”> <UseTemplate Name=“ASOBO_HANDLING_Water_Rudder_Controller_Template”> <INTERACTION_TYPE>Switch</INTERACTION_TYPE> </UseTemplate> </Template> <Template Name=“ASOBO_HANDLING_Lever_Water_Rudder_Template”> <UseTemplate Name=“ASOBO_HANDLING_Water_Rudder_Controller_Template”> <INTERACTION_TYPE>Lever</INTERACTION_TYPE> <INVERT_INTERACTION>True</INVERT_INTERACTION> </UseTemplate> </Template> <Template Name=“ASOBO_HANDLING_Switch_Wing_Fold_Template”> <Parameters Type=“Default”> <NODE_ID>HANDLING_Switch_Wing_Fold</NODE_ID> <ANIM_NAME>HANDLING_Switch_Wing_Fold</ANIM_NAME> </Parameters> <UseTemplate Name=“ASOBO_Handling_Base_Template”> <IE_NAME>Lever_WingFold</IE_NAME> <INTERACTION_TYPE>Switch</INTERACTION_TYPE> <TOOLTIP_TITLE>@TT_Package.WING_FOLD_TITLE</TOOLTIP_TITLE> <TT_DESCRIPTION_ID>@TT_Package.WING_FOLD_ACTION</TT_DESCRIPTION_ID> <TT_VALUE_ON>@TT_Package.GT_STATE_RETRACTED</TT_VALUE_ON> <TT_VALUE_OFF>@TT_Package.GT_STATE_EXTENDED</TT_VALUE_OFF> <TT_VALUE_ONOFF_IS_DYNAMIC>False</TT_VALUE_ONOFF_IS_DYNAMIC> <SET_STATE_EXTERNAL>p0 (>K:SET_WING_FOLD)</SET_STATE_EXTERNAL> <GET_STATE_EXTERNAL>(A:FOLDING WING HANDLE POSITION, Boolean) sp0</GET_STATE_EXTERNAL> <WWISE_EVENT_1>wing_fold_switch_on</WWISE_EVENT_1> <WWISE_EVENT_2>wing_fold_switch_off</WWISE_EVENT_2> <BINDING_SET_0>Toggle_KeyEvent</BINDING_SET_0> <BINDING_SET_0_PARAM_0>(B:HANDLING_Lever_WingFold) !</BINDING_SET_0_PARAM_0> <BINDING_SET_0_PARAM_0_IS_DYNAMIC>True</BINDING_SET_0_PARAM_0_IS_DYNAMIC> <BINDING_SET_0_EVENT_ID>TOGGLE_WING_FOLD</BINDING_SET_0_EVENT_ID> <BINDING_SET_1>Set</BINDING_SET_1> <BINDING_SET_1_PARAM_0>p0 0 !=</BINDING_SET_1_PARAM_0> <BINDING_SET_1_PARAM_0_IS_DYNAMIC>True</BINDING_SET_1_PARAM_0_IS_DYNAMIC> <BINDING_SET_1_EVENT_ID>SET_WING_FOLD</BINDING_SET_1_EVENT_ID> <SIMVAR_TO_WATCH_0>FOLDING WING HANDLE POSITION</SIMVAR_TO_WATCH_0> </UseTemplate> </Template> <Template Name=“ASOBO_HANDLING_Wipers_Controller_Template”> <Parameters Type=“Default”> <ID>1</ID> </Parameters> <UseTemplate Name=“ASOBO_HANDLING_Wipers_Controller_SubTemplate”/> </Template> <Template Name=“ASOBO_HANDLING_Switch_Wipers_Template”> <UseTemplate Name=“ASOBO_HANDLING_Wipers_Controller_Template”> <INTERACTION_TYPE>Switch</INTERACTION_TYPE> </UseTemplate> </Template> <Template Name=“ASOBO_HANDLING_Knob_Wipers_Template”> <UseTemplate Name=“ASOBO_HANDLING_Wipers_Controller_Template”> <INTERACTION_TYPE>Knob</INTERACTION_TYPE> </UseTemplate> </Template> <Template Name=“ASOBO_HANDLING_Launch_Bar_Retract_Template”> <Parameters Type=“Default”> <NODE_ID>HANDLING_Launch_Bar_Retract</NODE_ID> <ANIM_NAME>HANDLING_Launch_Bar_Retract</ANIM_NAME> <TT_DESCRIPTION_ID>@TT_Package.LAUNCH_BAR_ACTION</TT_DESCRIPTION_ID> </Parameters> <UseTemplate Name=“ASOBO_Handling_Base_Template”> <IE_NAME>Lever_LaunchBar</IE_NAME> <INTERACTION_TYPE>Switch</INTERACTION_TYPE> <TOOLTIP_TITLE>@TT_Package.LAUNCH_BAR_TITLE</TOOLTIP_TITLE> <TT_VALUE_ON>@TT_Package.GT_STATE_EXTENDED</TT_VALUE_ON> <TT_VALUE_OFF>@TT_Package.GT_STATE_RETRACTED</TT_VALUE_OFF> <TT_VALUE_ONOFF_IS_DYNAMIC>False</TT_VALUE_ONOFF_IS_DYNAMIC> <SET_STATE_EXTERNAL>p0 (>K:SET_LAUNCH_BAR_SWITCH)</SET_STATE_EXTERNAL> <GET_STATE_EXTERNAL>(A:LAUNCHBAR SWITCH, Boolean) sp0</GET_STATE_EXTERNAL> <WWISE_EVENT_1>launchbar_switch_on</WWISE_EVENT_1> <WWISE_EVENT_2>launchbar_switch_off</WWISE_EVENT_2> <BINDING_SET_0>Toggle_KeyEvent</BINDING_SET_0> <BINDING_SET_0_PARAM_0>(B:HANDLING_Lever_LaunchBar) !</BINDING_SET_0_PARAM_0> <BINDING_SET_0_PARAM_0_IS_DYNAMIC>True</BINDING_SET_0_PARAM_0_IS_DYNAMIC> <BINDING_SET_0_EVENT_ID>TOGGLE_LAUNCH_BAR_SWITCH</BINDING_SET_0_EVENT_ID> <BINDING_SET_1>Set</BINDING_SET_1> <BINDING_SET_1_PARAM_0>p0 0 !=</BINDING_SET_1_PARAM_0> <BINDING_SET_1_PARAM_0_IS_DYNAMIC>True</BINDING_SET_1_PARAM_0_IS_DYNAMIC> <BINDING_SET_1_EVENT_ID>SET_LAUNCH_BAR_SWITCH</BINDING_SET_1_EVENT_ID> <SIMVAR_TO_WATCH_0>LAUNCHBAR SWITCH</SIMVAR_TO_WATCH_0> </UseTemplate> </Template> <Template Name=“ASOBO_HANDLING_TailHook_Lever_Template”> <Parameters Type=“Default”> <NODE_ID>HANDLING_TailHook_Lever</NODE_ID> <ANIM_NAME>HANDLING_TailHook_Lever</ANIM_NAME> <TT_DESCRIPTION_ID>@TT_Package.TAIL_HOOK_ACTION</TT_DESCRIPTION_ID> </Parameters> <UseTemplate Name=“ASOBO_Handling_Base_Template”> <IE_NAME>Lever_TailHook</IE_NAME> <INTERACTION_TYPE>Switch</INTERACTION_TYPE> <TOOLTIP_TITLE>@TT_Package.TAIL_HOOK_TITLE</TOOLTIP_TITLE> <TT_VALUE_ON>@TT_Package.GT_STATE_EXTENDED</TT_VALUE_ON> <TT_VALUE_OFF>@TT_Package.GT_STATE_RETRACTED</TT_VALUE_OFF> <TT_VALUE_ONOFF_IS_DYNAMIC>False</TT_VALUE_ONOFF_IS_DYNAMIC> <SET_STATE_EXTERNAL>p0 (>K:SET_TAIL_HOOK_HANDLE)</SET_STATE_EXTERNAL> <GET_STATE_EXTERNAL>(A:TAILHOOK HANDLE, Boolean) sp0</GET_STATE_EXTERNAL> <WWISE_EVENT_1>tailhook_switch_on</WWISE_EVENT_1> <WWISE_EVENT_2>tailhook_switch_off</WWISE_EVENT_2> <BINDING_SET_0>Toggle_KeyEvent</BINDING_SET_0> <BINDING_SET_0_PARAM_0>(B:HANDLING_Lever_TailHook) !</BINDING_SET_0_PARAM_0> <BINDING_SET_0_PARAM_0_IS_DYNAMIC>True</BINDING_SET_0_PARAM_0_IS_DYNAMIC> <BINDING_SET_0_EVENT_ID>TOGGLE_TAIL_HOOK_HANDLE</BINDING_SET_0_EVENT_ID> <BINDING_SET_1>Set</BINDING_SET_1> <BINDING_SET_1_PARAM_0>p0 0 !=</BINDING_SET_1_PARAM_0> <BINDING_SET_1_PARAM_0_IS_DYNAMIC>True</BINDING_SET_1_PARAM_0_IS_DYNAMIC> <BINDING_SET_1_EVENT_ID>SET_TAIL_HOOK_HANDLE</BINDING_SET_1_EVENT_ID> <SIMVAR_TO_WATCH_0>TAILHOOK HANDLE</SIMVAR_TO_WATCH_0> </UseTemplate> </Template> <Template Name=“ASOBO_HANDLING_Trim_Reset_Push_Template”> <Parameters Type=“Default”> <NODE_ID>HANDLING_Push_Trim_Reset</NODE_ID> <ANIM_NAME>HANDLING_Push_Trim_Reset</ANIM_NAME> <RUDDER_RESET_VALUE>0</RUDDER_RESET_VALUE> <ELEVATOR_RESET_VALUE>0</ELEVATOR_RESET_VALUE> <AILERON_RESET_VALUE>0</AILERON_RESET_VALUE> <RUDDER_RESET/> <ELEVATOR_RESET/> <AILERON_RESET/> <WWISE_EVENT_1>trim_reset_push_button_on</WWISE_EVENT_1> <WWISE_EVENT_2>trim_reset_push_button_off</WWISE_EVENT_2> <TT_DESCRIPTION_ID>@TT_Package.HANDLING_PUSH_TRIMRESET_ACTION</TT_DESCRIPTION_ID> </Parameters> <Parameters Type=“Override”> <Condition Valid=“NO_RUDDER_RESET”> <False> <RUDDER_RESET>#RUDDER_RESET_VALUE# (>K:RUDDER_TRIM_SET)</RUDDER_RESET> </False> </Condition> <Condition Valid=“NO_RUDDER_ELEVATOR”> <False> <ELEVATOR_RESET>#ELEVATOR_RESET_VALUE# (>K:ELEVATOR_TRIM_SET)</ELEVATOR_RESET> </False> </Condition> <Condition Valid=“NO_AILERON_RESET”> <False> <AILERON_RESET>#AILERON_RESET_VALUE# (>K:AILERON_TRIM_SET)</AILERON_RESET> </False> </Condition> </Parameters> <UseTemplate Name=“ASOBO_Handling_Base_Template”> <IE_NAME>HANDLING_Trim_Reset</IE_NAME> <INTERACTION_TYPE>Push</INTERACTION_TYPE> <TOOLTIP_TITLE>@TT_Package.HANDLING_PUSH_TRIMRESET_TITLE</TOOLTIP_TITLE> <TT_DESCRIPTION_ID>#TT_DESCRIPTION_ID#</TT_DESCRIPTION_ID> <SET_STATE_EXTERNAL> #RUDDER_RESET# #AILERON_RESET# (A:SIM ON GROUND,Bool) if{ #ELEVATOR_RESET# } </SET_STATE_EXTERNAL> </UseTemplate> </Template> <!– ########################################## –> <!– HANDLING Interaction inputs setup template –> <Template Name=“ASOBO_HANDLING_Base_Template”> <Parameters Type=“Default”> <INPUT_EVENT_ID_SOURCE>HANDLING</INPUT_EVENT_ID_SOURCE> <WWISE_PREFIX>HANDLING</WWISE_PREFIX> </Parameters> <UseTemplate Name=“ASOBO_Interaction_Base_Template”> <USE_INPUT_EVENT_ID>HANDLING</USE_INPUT_EVENT_ID> </UseTemplate> </Template> <Template Name=“ASOBO_HANDLING_Push_Event_Base_Template”> <UseTemplate Name=“ASOBO_Interaction_Push_Event_Base_Template”> <USE_INPUT_EVENT_ID>HANDLING</USE_INPUT_EVENT_ID> </UseTemplate> </Template> <Template Name=“ASOBO_HANDLING_Pull_Event_Base_Template”> <UseTemplate Name=“ASOBO_Interaction_Pull_Event_Base_Template”> <USE_INPUT_EVENT_ID>HANDLING</USE_INPUT_EVENT_ID> </UseTemplate> </Template> <Template Name=“ASOBO_HANDLING_Axis_Event_Base_Template”> <Parameters Type=“Default”> <INPUT_EVENT_ID_SOURCE>HANDLING</INPUT_EVENT_ID_SOURCE> </Parameters> <UseTemplate Name=“ASOBO_Interaction_Axis_Event_Base_Template”> <USE_INPUT_EVENT_ID>HANDLING</USE_INPUT_EVENT_ID> </UseTemplate> </Template> <Template Name=“ASOBO_HANDLING_Update_Unlock_Tailwheel”> <Parameters Type=“Default”> <ID>0</ID> <TAILWHEEL_LOCK_MAX_ANGLE>2</TAILWHEEL_LOCK_MAX_ANGLE> </Parameters> <Parameters Type=“Override”> <LOCK_CODE>(>K:TOGGLE_TAILWHEEL_LOCK)</LOCK_CODE> </Parameters> <Parameters Type=“Override”> <Condition> <Test> <Greater> <Number>#TAILWHEEL_LOCK_MAX_ANGLE#</Number> <Number>0</Number> </Greater> </Test> <True> <LOCK_CODE> l1 (A:GEAR STEER ANGLE:#ID#, degrees) abs #TAILWHEEL_LOCK_MAX_ANGLE# < or if{ (* Tailwheel only relocks when *) #LOCK_CODE# } </LOCK_CODE> </True> </Condition> </Parameters> <UseTemplate Name=“ASOBO_GT_Update”> <FREQUENCY>2</FREQUENCY> <UPDATE_CODE> (A:YOKE Y POSITION, percent) -90 < (A:TAILWHEEL LOCK ON, Bool) s1 == if{ #LOCK_CODE# } </UPDATE_CODE> </UseTemplate> </Template> <Template Name=“ASOBO_HANDLING_Switch_Water_Ballast_Template”> <Parameters Type=“Default”> <ID>1</ID> </Parameters> <Parameters Type=“Default”> <NODE_ID>Switch_Water_Ballast_#ID#</NODE_ID> <ANIM_NAME>Switch_Water_Ballast_#ID#</ANIM_NAME> <IE_NAME>Glider_Switch_Water_Ballast_#ID#</IE_NAME> <MIN_BALLAST_TO_TOGGLE>1</MIN_BALLAST_TO_TOGGLE> </Parameters> <Parameters Type=“Override”> <GET_STATE_EXTERNAL/> <SET_STATE_EXTERNAL/> </Parameters> <Parameters Type=“Override”> <Condition NotEmpty=“BALLAST_VALVE_ID_1”> <True> <Loop> <Setup> <Param>CUR_ID</Param> <From>1</From> <Inc>1</Inc> <While> <Arg Valid=“BALLAST_VALVE_ID_#CUR_ID#”/> </While> </Setup> <Do> <Parameters Type=“Default” Lifetime=“Loop”> <SET_STATE_EXTERNAL_T/> <GET_STATE_EXTERNAL_T>1</GET_STATE_EXTERNAL_T> </Parameters> <Parameters Type=“Override” Lifetime=“Loop”> <CUR_BALLAST_ID Process=“Param”>BALLAST_VALVE_ID_#CUR_ID#</CUR_BALLAST_ID> </Parameters> <Parameters Type=“Override” Lifetime=“Loop”> <SET_STATE_EXTERNAL_T>#SET_STATE_EXTERNAL_T# (A:WATER BALLAST VALVE:#CUR_BALLAST_ID#, Boolean) (O:HANDLING_#IE_NAME#_Position) != if{ #CUR_BALLAST_ID# (>K:TOGGLE_WATER_BALLAST_VALVE) }</SET_STATE_EXTERNAL_T> <GET_STATE_EXTERNAL_T>#GET_STATE_EXTERNAL_T# (A:WATER BALLAST VALVE:#CUR_BALLAST_ID#, Boolean) and</GET_STATE_EXTERNAL_T> </Parameters> </Do> <Then> <SET_STATE_EXTERNAL>#SET_STATE_EXTERNAL_T# sp0</SET_STATE_EXTERNAL> <GET_STATE_EXTERNAL>#GET_STATE_EXTERNAL_T#</GET_STATE_EXTERNAL> </Then> </Loop> </True> <False> <GET_STATE_EXTERNAL>(A:WATER BALLAST VALVE:#ID#) sp0</GET_STATE_EXTERNAL> <SET_STATE_EXTERNAL>(A:WATER BALLAST VALVE:#ID#, Boolean) (O:HANDLING_#IE_NAME#_Position) != if{ #ID# (>K:TOGGLE_WATER_BALLAST_VALVE) }</SET_STATE_EXTERNAL> </False> </Condition> </Parameters> <UseTemplate Name=“ASOBO_Handling_Base_Template”> <TOOLTIP_TITLE>@TT_Package.WATER_BALLAST_VALVE_TITLE</TOOLTIP_TITLE> <TT_DESCRIPTION_ID>@TT_Package.WATER_BALLAST_VALVE_ACTION</TT_DESCRIPTION_ID> <INTERACTION_TYPE>Switch</INTERACTION_TYPE> <TT_VALUE_ON>@TT_Package.GT_STATE_OPEN</TT_VALUE_ON> <TT_VALUE_OFF>@TT_Package.GT_STATE_CLOSED</TT_VALUE_OFF> <TT_VALUE_ONOFF_IS_DYNAMIC>False</TT_VALUE_ONOFF_IS_DYNAMIC> </UseTemplate> </Template> <Template Name=“ASOBO_HANDLING_Push_Tow_Release”> <Parameters Type=“Default”> <NODE_ID></NODE_ID> <ANIM_NAME></ANIM_NAME> <ID>1</ID> </Parameters> <Parameters Type=“Default”> <TOOLTIP_TITLE>@TT_Package.TOW_RELEASE_TITLE</TOOLTIP_TITLE> <TT_DESCRIPTION_ID>@TT_Package.TOW_RELEASE_ACTION</TT_DESCRIPTION_ID> <TT_VALUE>(A:TOW CONNECTION, Bool) if{ (R:1:@TT_Package.GT_STATE_CONNECTED) } els{ (R:1:@TT_Package.GT_STATE_RELEASED) }</TT_VALUE> <TT_VALUE_IS_DYNAMIC>True</TT_VALUE_IS_DYNAMIC> </Parameters> <Parameters Type=“Override”> <INPUT_EVENT_ID_SOURCE>HANDLING</INPUT_EVENT_ID_SOURCE> <WWISE_PREFIX>Tow_Release</WWISE_PREFIX> <IE_NAME>Tow_Release</IE_NAME> </Parameters> <UseTemplate Name=“ASOBO_Handling_Base_Template”> <INTERACTION_TYPE>Push</INTERACTION_TYPE> <CREATE_COMPONENT>True</CREATE_COMPONENT> <SET_STATE_EXTERNAL>(>K:TOW_PLANE_RELEASE)</SET_STATE_EXTERNAL> <GET_STATE_EXTERNAL>(A:TOW RELEASE HANDLE,percent over 100) (>O:_ButtonAnimVar)</GET_STATE_EXTERNAL> <SIMVAR_TO_WATCH_0>TOW RELEASE HANDLE</SIMVAR_TO_WATCH_0> </UseTemplate> </Template> </ModelBehaviors>

 

 

Includes

Templates

Template list

  1. ASOBO_HANDLING_Yoke_Template
  2. ASOBO_HANDLING_Yoke_Hideable_Template
  3. ASOBO_HANDLING_Timer_Template
  4. ASOBO_HANDLING_Push_Timer_Template
  5. ASOBO_HANDLING_StormClear_Template
  6. ASOBO_HANDLING_Push_StormClear_Template
  7. ASOBO_HANDLING_CWS_Template
  8. ASOBO_HANDLING_Push_CWS_Template
  9. ASOBO_HANDLING_Ident_Template
  10. ASOBO_HANDLING_Push_Ident_Template
  11. ASOBO_HANDLING_Swap_Template
  12. ASOBO_HANDLING_Push_Swap_Template
  13. ASOBO_HANDLING_AP_Trim_Disc_Template
  14. ASOBO_HANDLING_Push_AP_Trim_Disc_Template
  15. ASOBO_HANDLING_Switch_AP_Trim_Disc_Template
  16. ASOBO_HANDLING_Steering_Tiller_Template
  17. ASOBO_HANDLING_Switch_ElevatorTrim_Template
  18. ASOBO_HANDLING_Wheel_ElevatorTrim_Template
  19. ASOBO_HANDLING_Secondary_Trim_Available_Template
  20. ASOBO_HANDLING_Push_Secondary_ElevatorTrim_Available_Template
  21. ASOBO_HANDLING_Joystick_YawPitch_Template
  22. ASOBO_HANDLING_AntiSkid_Template
  23. ASOBO_HANDLING_Switch_AntiSkid_Template
  24. ASOBO_HANDLING_GLimiter_Template
  25. ASOBO_HANDLING_Push_GLimiter_Template
  26. ASOBO_HANDLING_Switch_GLimiter_Template
  27. ASOBO_HANDLING_InertSep_Template
  28. ASOBO_HANDLING_Lever_InertSep_Template
  29. ASOBO_HANDLING_Knob_RudderTrim_Template
  30. ASOBO_HANDLING_Switch_RudderTrim_Template
  31. ASOBO_HANDLING_Wheel_RudderTrim_Template
  32. ASOBO_HANDLING_RudderPedals_Template
  33. ASOBO_HANDLING_RudderPedals_Brake_Template
  34. ASOBO_HANDLING_Autobrakes_Template
  35. ASOBO_HANDLING_Push_Autobrakes_Template
  36. ASOBO_HANDLING_Knob_Autobrakes_Template
  37. ASOBO_HANDLING_Indicator_ElevatorTrim_Template
  38. ASOBO_HANDLING_AutoSpoiler_Template
  39. ASOBO_HANDLING_Push_AutoSpoiler_Template
  40. ASOBO_HANDLING_Spoilers_Int_Template
  41. ASOBO_HANDLING_Switch_Spoiler_Template
  42. ASOBO_HANDLING_Lever_Spoilers_Template
  43. ASOBO_HANDLING_Lever_Flaps_Template
  44. ASOBO_HANDLING_Lever_Flaps_Continuous_Template
  45. ASOBO_HANDLING_Button_Flaps_Template
  46. ASOBO_HANDLING_Lever_With_Button_Flaps_Template
  47. ASOBO_HANDLING_Indicator_Flaps_Template
  48. ASOBO_HANDLING_Switch_AerobaticsTrimFlaps_Template
  49. ASOBO_HANDLING_Switch_AileronTrim_Template
  50. ASOBO_HANDLING_Knob_AileronTrim_Template
  51. ASOBO_HANDLING_Light_ElevatorTrim_Template
  52. ASOBO_HANDLING_Light_RudderTrim_Template
  53. ASOBO_HANDLING_Light_AileronTrim_Template
  54. ASOBO_HANDLING_Combined_Trim_Template
  55. ASOBO_HANDLING_Elevator_Aileron_Trim_Template
  56. ASOBO_HANDLING_Longitudinal_Lateral_Trim_Template
  57. ASOBO_HANDLING_Light_Flaps_Template
  58. ASOBO_HANDLING_Light_Flaps_Transit_Template
  59. ASOBO_HANDLING_Water_Rudder_Controller_Template
  60. ASOBO_HANDLING_Switch_Water_Rudder_Template
  61. ASOBO_HANDLING_Lever_Water_Rudder_Template
  62. ASOBO_HANDLING_Switch_Wing_Fold_Template
  63. ASOBO_HANDLING_Wipers_Controller_Template
  64. ASOBO_HANDLING_Switch_Wipers_Template
  65. ASOBO_HANDLING_Knob_Wipers_Template
  66. ASOBO_HANDLING_Launch_Bar_Retract_Template
  67. ASOBO_HANDLING_TailHook_Lever_Template
  68. ASOBO_HANDLING_Trim_Reset_Push_Template
  69. ASOBO_HANDLING_Base_Template
  70. ASOBO_HANDLING_Push_Event_Base_Template
  71. ASOBO_HANDLING_Pull_Event_Base_Template
  72. ASOBO_HANDLING_Axis_Event_Base_Template
  73. ASOBO_HANDLING_Update_Unlock_Tailwheel
  74. ASOBO_HANDLING_Switch_Water_Ballast_Template
  75. ASOBO_HANDLING_Push_Tow_Release

  • ASOBO_HANDLING_Yoke_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Yoke_Template”> <Parameters Type=“Default”> <ID>1</ID> </Parameters> <UseTemplate Name=“ASOBO_HANDLING_Yoke_SubTemplate”/> </Template>

    Parameters initialization:

    • Default Parameters set:

      • ID

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Yoke_Hideable_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Yoke_Hideable_Template”> <Parameters Type=“Default”> <ID>1</ID> </Parameters> <UseTemplate Name=“ASOBO_HANDLING_Yoke_Hideable_SubTemplate”/> </Template>

    Parameters initialization:

    • Default Parameters set:

      • ID

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Timer_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Timer_Template”> <UseTemplate Name=“ASOBO_HANDLING_Timer_SubTemplate”/> </Template>

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Push_Timer_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Push_Timer_Template”> <UseTemplate Name=“ASOBO_HANDLING_Timer_Template”> <INTERACTION_TYPE>Push</INTERACTION_TYPE> </UseTemplate> </Template>

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_StormClear_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_StormClear_Template”> <UseTemplate Name=“ASOBO_HANDLING_StormClear_SubTemplate”/> </Template>

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Push_StormClear_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Push_StormClear_Template”> <UseTemplate Name=“ASOBO_HANDLING_StormClear_Template”> <INTERACTION_TYPE>Push</INTERACTION_TYPE> </UseTemplate> </Template>

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_CWS_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_CWS_Template”> <UseTemplate Name=“ASOBO_HANDLING_CWS_SubTemplate”/> </Template>

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Push_CWS_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Push_CWS_Template”> <UseTemplate Name=“ASOBO_HANDLING_CWS_Template”> <INTERACTION_TYPE>Push</INTERACTION_TYPE> </UseTemplate> </Template>

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Ident_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Ident_Template”> <Parameters Type=“Default”> <ID>1</ID> </Parameters> <UseTemplate Name=“ASOBO_HANDLING_Ident_SubTemplate”/> </Template>

    Parameters initialization:

    • Default Parameters set:

      • ID

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Push_Ident_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Push_Ident_Template”> <UseTemplate Name=“ASOBO_HANDLING_Ident_Template”> <INTERACTION_TYPE>Push</INTERACTION_TYPE> </UseTemplate> </Template>

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Swap_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Swap_Template”> <Parameters Type=“Default”> <ID>1</ID> </Parameters> <UseTemplate Name=“ASOBO_HANDLING_Swap_SubTemplate”/> </Template>

    Parameters initialization:

    • Default Parameters set:

      • ID

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Push_Swap_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Push_Swap_Template”> <UseTemplate Name=“ASOBO_HANDLING_Swap_Template”> <INTERACTION_TYPE>Push</INTERACTION_TYPE> </UseTemplate> </Template>

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_AP_Trim_Disc_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_AP_Trim_Disc_Template”> <Parameters Type=“Default”> <ID>1</ID> </Parameters> <UseTemplate Name=“ASOBO_HANDLING_AP_Trim_Disc_SubTemplate”/> </Template>

    Parameters initialization:

    • Default Parameters set:

      • ID

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Push_AP_Trim_Disc_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Push_AP_Trim_Disc_Template”> <UseTemplate Name=“ASOBO_HANDLING_AP_Trim_Disc_Template”> <INTERACTION_TYPE>PUSH</INTERACTION_TYPE> </UseTemplate> </Template>

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Switch_AP_Trim_Disc_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Switch_AP_Trim_Disc_Template”> <UseTemplate Name=“ASOBO_HANDLING_AP_Trim_Disc_Template”> <INTERACTION_TYPE>SWITCH</INTERACTION_TYPE> </UseTemplate> </Template>

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Steering_Tiller_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Steering_Tiller_Template”> <Parameters Type=“Default”> <ID>1</ID> </Parameters> <UseTemplate Name=“ASOBO_HANDLING_Steering_Tiller_SubTemplate”/> </Template>

    Parameters initialization:

    • Default Parameters set:

      • ID

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Switch_ElevatorTrim_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Switch_ElevatorTrim_Template”> <UseTemplate Name=“ASOBO_HANDLING_ElevatorTrim_Template”> <INTERACTION_TYPE>SWITCH</INTERACTION_TYPE> </UseTemplate> </Template>

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Wheel_ElevatorTrim_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Wheel_ElevatorTrim_Template”> <UseTemplate Name=“ASOBO_HANDLING_ElevatorTrim_Template”> <INTERACTION_TYPE>WHEEL</INTERACTION_TYPE> </UseTemplate> </Template>

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Secondary_Trim_Available_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Secondary_Trim_Available_Template”> <UseTemplate Name=“ASOBO_HANDLING_Secondary_Trim_Available_SubTemplate”/> </Template>

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Push_Secondary_ElevatorTrim_Available_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Push_Secondary_ElevatorTrim_Available_Template”> <UseTemplate Name=“ASOBO_HANDLING_Secondary_Trim_Available_Template”> <INTERACTION_TYPE>Push</INTERACTION_TYPE> <TRIM_NAME>Elevator</TRIM_NAME> </UseTemplate> </Template>

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Joystick_YawPitch_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Joystick_YawPitch_Template”> <Parameters Type=“Default”> <ID>1</ID> </Parameters> <UseTemplate Name=“ASOBO_HANDLING_Joystick_YawPitch_SubTemplate”/> </Template>

    Parameters initialization:

    • Default Parameters set:

      • ID

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_AntiSkid_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_AntiSkid_Template”> <UseTemplate Name=“ASOBO_HANDLING_AntiSkid_SubTemplate”/> </Template>

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Switch_AntiSkid_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Switch_AntiSkid_Template”> <UseTemplate Name=“ASOBO_HANDLING_AntiSkid_Template”> <INTERACTION_TYPE>Switch</INTERACTION_TYPE> </UseTemplate> </Template>

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_GLimiter_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_GLimiter_Template”> <UseTemplate Name=“ASOBO_HANDLING_GLimiter_SubTemplate”/> </Template>

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Push_GLimiter_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Push_GLimiter_Template”> <UseTemplate Name=“ASOBO_HANDLING_GLimiter_Template”> <INTERACTION_TYPE>Push</INTERACTION_TYPE> </UseTemplate> </Template>

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Switch_GLimiter_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Switch_GLimiter_Template”> <UseTemplate Name=“ASOBO_HANDLING_GLimiter_Template”> <INTERACTION_TYPE>Switch</INTERACTION_TYPE> </UseTemplate> </Template>

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_InertSep_Template

    Definition from XML

    <Template name=“ASOBO_HANDLING_InertSep_Template”> <UseTemplate Name=“ASOBO_HANDLING_InertSep_SubTemplate”/> </Template>

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Lever_InertSep_Template

    Definition from XML

    <Template name=“ASOBO_HANDLING_Lever_InertSep_Template”> <UseTemplate Name=“ASOBO_HANDLING_InertSep_Template”> <INTERACTION_TYPE>Lever</INTERACTION_TYPE> </UseTemplate> </Template>

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Knob_RudderTrim_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Knob_RudderTrim_Template”> <UseTemplate Name=“ASOBO_HANDLING_RudderTrim_Template”> <INTERACTION_TYPE>KNOB</INTERACTION_TYPE> </UseTemplate> </Template>

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Switch_RudderTrim_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Switch_RudderTrim_Template”> <UseTemplate Name=“ASOBO_HANDLING_RudderTrim_Template”> <INTERACTION_TYPE>SWITCH</INTERACTION_TYPE> </UseTemplate> </Template>

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Wheel_RudderTrim_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Wheel_RudderTrim_Template”> <UseTemplate Name=“ASOBO_HANDLING_RudderTrim_Template”> <INTERACTION_TYPE>WHEEL</INTERACTION_TYPE> </UseTemplate> </Template>

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_RudderPedals_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_RudderPedals_Template”> <Parameters Type=“Default”> <ID>1</ID> <Condition Check=“SPLIT_RUDDERS”> <True> <RUDDERPEDALS_TYPE>SPLITTED</RUDDERPEDALS_TYPE> </True> </Condition> </Parameters> <UseTemplate Name=“ASOBO_HANDLING_RudderPedals_SubTemplate”/> </Template>

    Parameters initialization:

    • Default Parameters set:

      • ID

      Condition: Check(SPLIT_RUDDERS)

      • Case: True

        Parameters set:

        • RUDDERPEDALS_TYPE

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_RudderPedals_Brake_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_RudderPedals_Brake_Template”> <Parameters Type=“Default”> <ANIM_LENGTH>100</ANIM_LENGTH> <ANIM_NAME_L>HANDLING_RudderPedals_Brake_L</ANIM_NAME_L> <ANIM_NAME_R>HANDLING_RudderPedals_Brake_R</ANIM_NAME_R> </Parameters> <Parameters Type=“Override”> <Condition Valid=“DONT_BRAKE_ON_PARKINGBRAKE”> <True> <SIMVAR_END> EX1</SIMVAR_END> </True> <False> <SIMVAR_END/> </False> </Condition> </Parameters> <Condition Valid=“DIFFERENTIATE_BRAKE_ANIM_L_R”> <True> <UseTemplate Name=“ASOBO_GT_Anim_Sim”> <ANIM_NAME>#ANIM_NAME_L#</ANIM_NAME> <ANIM_SIMVAR>BRAKE LEFT POSITION#SIMVAR_END#</ANIM_SIMVAR> <ANIM_SIMVAR_UNITS>percent</ANIM_SIMVAR_UNITS> </UseTemplate> <UseTemplate Name=“ASOBO_GT_Anim_Sim”> <ANIM_NAME>#ANIM_NAME_R#</ANIM_NAME> <ANIM_SIMVAR>BRAKE RIGHT POSITION#SIMVAR_END#</ANIM_SIMVAR> <ANIM_SIMVAR_UNITS>percent</ANIM_SIMVAR_UNITS> </UseTemplate> </True> <False> <UseTemplate Name=“ASOBO_GT_Anim_Sim”> <ANIM_SIMVAR>BRAKE LEFT POSITION#SIMVAR_END#</ANIM_SIMVAR> <ANIM_SIMVAR_UNITS>percent</ANIM_SIMVAR_UNITS> </UseTemplate> </False> </Condition> </Template>

    Parameters initialization:

    • Default Parameters set:

      • ANIM_LENGTH
      • ANIM_NAME_L
      • ANIM_NAME_R

    • Override Condition: Valid(DONT_BRAKE_ON_PARKINGBRAKE)

      • Case: True

        Parameters set:

        • SIMVAR_END

      • Case: False

        Parameters set:

        • SIMVAR_END

    Condition: Valid(DIFFERENTIATE_BRAKE_ANIM_L_R)

    • Case: True

       

      Templates used:

      • ASOBO_GT_Anim_Sim Parameters set:

        • ANIM_NAME (using ANIM_NAME_L)
        • ANIM_SIMVAR (using SIMVAR_END)
        • ANIM_SIMVAR_UNITS

      • ASOBO_GT_Anim_Sim Parameters set:

        • ANIM_NAME (using ANIM_NAME_R)
        • ANIM_SIMVAR (using SIMVAR_END)
        • ANIM_SIMVAR_UNITS

    • Case: False

       

      Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Autobrakes_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Autobrakes_Template”> <Parameters Type=“Default”> <ID>1</ID> </Parameters> <UseTemplate Name=“ASOBO_HANDLING_Autobrakes_SubTemplate”/> </Template>

    Parameters initialization:

    • Default Parameters set:

      • ID

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Push_Autobrakes_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Push_Autobrakes_Template”> <UseTemplate Name=“ASOBO_HANDLING_Autobrakes_Template”> <INTERACTION_TYPE>Push</INTERACTION_TYPE> </UseTemplate> </Template>

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Knob_Autobrakes_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Knob_Autobrakes_Template”> <UseTemplate Name=“ASOBO_HANDLING_Autobrakes_Template”> <INTERACTION_TYPE>Knob</INTERACTION_TYPE> </UseTemplate> </Template>

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Indicator_ElevatorTrim_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Indicator_ElevatorTrim_Template”> <Parameters Type=“Default”> <ANIM_NAME>HANDLING_Indicator_ElevatorTrim</ANIM_NAME> </Parameters> <Switch> <Case Check=“REF_VALUE_0”> <UseTemplate Name=“ASOBO_GT_Helper_Non_Linear_Animation_Code”> <SELECTION>(A:ELEVATOR TRIM POSITION, degrees)</SELECTION> </UseTemplate> </Case> <Case Check=“DISCRETE_STATES”> <UseTemplate Name=“ASOBO_GT_Anim_Code”> <ANIM_CODE>(A:ELEVATOR TRIM PCT, Percent) 100 + 200 / #DISCRETE_STATES# * near</ANIM_CODE> <ANIM_LENGTH>#DISCRETE_STATES#</ANIM_LENGTH> </UseTemplate> </Case> <Case Check=“ANIM_CODE”> <UseTemplate Name=“ASOBO_GT_Anim_Code”/> </Case> <Default> <UseTemplate Name=“ASOBO_GT_Anim_Sim”> <ANIM_LENGTH>200</ANIM_LENGTH> <ANIM_SIMVAR>ELEVATOR TRIM PCT</ANIM_SIMVAR> <ANIM_SIMVAR_UNITS>percent</ANIM_SIMVAR_UNITS> <ANIM_SIMVAR_BIAS>100</ANIM_SIMVAR_BIAS> </UseTemplate> </Default> </Switch> </Template>

    Parameters initialization:

    • Default Parameters set:

      • ANIM_NAME

    Condition: Switch

    • Case: Check(REF_VALUE_0)

      Parameters read:

      • REF_VALUE_0

       

      Templates used:

    • Case: Check(DISCRETE_STATES)

      Parameters read:

      • DISCRETE_STATES

       

      Templates used:

      • ASOBO_GT_Anim_Code Parameters set:

        • ANIM_CODE (using DISCRETE_STATES)
        • ANIM_LENGTH (using DISCRETE_STATES)

    • Case: Check(ANIM_CODE)

      Parameters read:

      • ANIM_CODE

       

      Templates used:

    • Default case:

       

      Templates used:

      • ASOBO_GT_Anim_Sim Parameters set:

        • ANIM_LENGTH
        • ANIM_SIMVAR
        • ANIM_SIMVAR_UNITS
        • ANIM_SIMVAR_BIAS

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_AutoSpoiler_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_AutoSpoiler_Template”> <UseTemplate Name=“ASOBO_HANDLING_AutoSpoiler_SubTemplate”/> </Template>

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Push_AutoSpoiler_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Push_AutoSpoiler_Template”> <UseTemplate Name=“ASOBO_HANDLING_AutoSpoiler_Template”> <INTERACTION_TYPE>Push</INTERACTION_TYPE> </UseTemplate> </Template>

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Spoilers_Int_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Spoilers_Int_Template”> <UseTemplate Name=“ASOBO_HANDLING_Spoilers_Int_SubTemplate”/> </Template>

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Switch_Spoiler_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Switch_Spoiler_Template”> <UseTemplate Name=“ASOBO_HANDLING_Spoilers_Int_Template”> <INTERACTION_TYPE>Switch</INTERACTION_TYPE> </UseTemplate> </Template>

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Lever_Spoilers_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Lever_Spoilers_Template”> <UseTemplate Name=“ASOBO_HANDLING_Spoilers_Int_Template”> <INTERACTION_TYPE>Lever</INTERACTION_TYPE> </UseTemplate> </Template>

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Lever_Flaps_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Lever_Flaps_Template”> <UseTemplate Name=“ASOBO_HANDLING_Flaps_SubTemplate”> <INTERACTION_TYPE>Lever</INTERACTION_TYPE> </UseTemplate> </Template>

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Lever_Flaps_Continuous_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Lever_Flaps_Continuous_Template”> <UseTemplate Name=“ASOBO_HANDLING_Flaps_SubTemplate”> <INTERACTION_TYPE>Lever</INTERACTION_TYPE> <IS_CONTINUOUS>True</IS_CONTINUOUS> </UseTemplate> </Template>

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Button_Flaps_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Button_Flaps_Template”> <UseTemplate Name=“ASOBO_HANDLING_Flaps_SubTemplate”> <INTERACTION_TYPE>Push</INTERACTION_TYPE> </UseTemplate> </Template>

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Lever_With_Button_Flaps_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Lever_With_Button_Flaps_Template”> <UseTemplate Name=“ASOBO_HANDLING_Flaps_SubTemplate”> <INTERACTION_TYPE>Lever</INTERACTION_TYPE> <HAS_BUTTON>True</HAS_BUTTON> </UseTemplate> </Template>

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Indicator_Flaps_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Indicator_Flaps_Template”> <Parameters Type=“Default”> <ANIM_NAME>HANDLING_Indicator_Flaps</ANIM_NAME> <NODE_ID>HANDLING_Indicator_Flaps</NODE_ID> <PART_ID>HANDLING_Indicator_Flaps</PART_ID> </Parameters> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <UseTemplate Name=“ASOBO_GT_Anim_Sim”> <ANIM_LENGTH>100</ANIM_LENGTH> <ANIM_SIMVAR>TRAILING EDGE FLAPS LEFT PERCENT</ANIM_SIMVAR> <ANIM_SIMVAR_UNITS>percent</ANIM_SIMVAR_UNITS> </UseTemplate> </Component> </Template>

    Parameters initialization:

    • Default Parameters set:

      • ANIM_NAME
      • NODE_ID
      • PART_ID

    Parameters read:

    • NODE_ID

    Components:

    • #NODE_ID# (Node: #NODE_ID#)  

      Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Switch_AerobaticsTrimFlaps_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Switch_AerobaticsTrimFlaps_Template”> <UseTemplate Name=“ASOBO_HANDLING_Switch_AerobaticsTrimFlaps_SubTemplate”/> </Template>

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Switch_AileronTrim_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Switch_AileronTrim_Template”> <UseTemplate Name=“ASOBO_HANDLING_AileronTrim_Template”> <INTERACTION_TYPE>SWITCH</INTERACTION_TYPE> </UseTemplate> </Template>

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Knob_AileronTrim_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Knob_AileronTrim_Template”> <UseTemplate Name=“ASOBO_HANDLING_AileronTrim_Template”> <INTERACTION_TYPE>KNOB</INTERACTION_TYPE> </UseTemplate> </Template>

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Light_ElevatorTrim_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Light_ElevatorTrim_Template”> <Parameters Type=“Default”> <NODE_ID>HANDLING_Light_ElevatorTrim</NODE_ID> <TRIM_TYPE>ELEVATOR</TRIM_TYPE> </Parameters> <UseTemplate Name=“ASOBO_HANDLING_Light_Trim_Subtemplate”/> </Template>

    Parameters initialization:

    • Default Parameters set:

      • NODE_ID
      • TRIM_TYPE

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Light_RudderTrim_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Light_RudderTrim_Template”> <Parameters Type=“Default”> <NODE_ID>HANDLING_Light_RudderTrim</NODE_ID> <TRIM_TYPE>RUDDER</TRIM_TYPE> </Parameters> <UseTemplate Name=“ASOBO_HANDLING_Light_Trim_Subtemplate”/> </Template>

    Parameters initialization:

    • Default Parameters set:

      • NODE_ID
      • TRIM_TYPE

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Light_AileronTrim_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Light_AileronTrim_Template”> <Parameters Type=“Default”> <NODE_ID>HANDLING_Light_AileronTrim</NODE_ID> <TRIM_TYPE>AILERON</TRIM_TYPE> </Parameters> <UseTemplate Name=“ASOBO_HANDLING_Light_Trim_Subtemplate”/> </Template>

    Parameters initialization:

    • Default Parameters set:

      • NODE_ID
      • TRIM_TYPE

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Combined_Trim_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Combined_Trim_Template”> <UseTemplate Name=“ASOBO_HANDLING_Combined_Trim_SubTemplate”> <INTERACTION_TYPE>Joystick</INTERACTION_TYPE> </UseTemplate> </Template>

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Elevator_Aileron_Trim_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Elevator_Aileron_Trim_Template”> <UseTemplate Name=“ASOBO_HANDLING_Combined_Trim_Template”> <UP_DN_TRIM_TYPE>ELEVATOR</UP_DN_TRIM_TYPE> <L_R_TRIM_TYPE>AILERON</L_R_TRIM_TYPE> </UseTemplate> </Template>

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Longitudinal_Lateral_Trim_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Longitudinal_Lateral_Trim_Template”> <UseTemplate Name=“ASOBO_HANDLING_Combined_Trim_Template”> <UP_DN_TRIM_TYPE>LONGITUDINAL</UP_DN_TRIM_TYPE> <L_R_TRIM_TYPE>LATERAL</L_R_TRIM_TYPE> </UseTemplate> </Template>

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Light_Flaps_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Light_Flaps_Template”> <Parameters Type=“Default”> <ID>1</ID> <MAX_FLAPS_INDEX>(A:FLAPS NUM HANDLE POSITIONS, Number)</MAX_FLAPS_INDEX> </Parameters> <UseTemplate Name=“ASOBO_HANDLING_Light_Flaps_SubTemplate”/> </Template>

    Parameters initialization:

    • Default Parameters set:

      • ID
      • MAX_FLAPS_INDEX

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Light_Flaps_Transit_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Light_Flaps_Transit_Template”> <Parameters Type=“Default”> <NODE_ID>HANDLING_Light_Flaps_#ID#</NODE_ID> </Parameters> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <UseTemplate Name=“ASOBO_GT_Emissive_Gauge”> <EMISSIVE_CODE>(A:CIRCUIT FLAP MOTOR ON, Bool)</EMISSIVE_CODE> </UseTemplate> </Component> </Template>

    Parameters initialization:

    • Default Parameters set:

      • NODE_ID (using ID)

    Parameters read:

    • NODE_ID

    Components:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Water_Rudder_Controller_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Water_Rudder_Controller_Template”> <UseTemplate Name=“ASOBO_HANDLING_Water_Rudder_Controller_SubTemplate”/> </Template>

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Switch_Water_Rudder_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Switch_Water_Rudder_Template”> <UseTemplate Name=“ASOBO_HANDLING_Water_Rudder_Controller_Template”> <INTERACTION_TYPE>Switch</INTERACTION_TYPE> </UseTemplate> </Template>

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Lever_Water_Rudder_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Lever_Water_Rudder_Template”> <UseTemplate Name=“ASOBO_HANDLING_Water_Rudder_Controller_Template”> <INTERACTION_TYPE>Lever</INTERACTION_TYPE> <INVERT_INTERACTION>True</INVERT_INTERACTION> </UseTemplate> </Template>

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Switch_Wing_Fold_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Switch_Wing_Fold_Template”> <Parameters Type=“Default”> <NODE_ID>HANDLING_Switch_Wing_Fold</NODE_ID> <ANIM_NAME>HANDLING_Switch_Wing_Fold</ANIM_NAME> </Parameters> <UseTemplate Name=“ASOBO_Handling_Base_Template”> <IE_NAME>Lever_WingFold</IE_NAME> <INTERACTION_TYPE>Switch</INTERACTION_TYPE> <TOOLTIP_TITLE>@TT_Package.WING_FOLD_TITLE</TOOLTIP_TITLE> <TT_DESCRIPTION_ID>@TT_Package.WING_FOLD_ACTION</TT_DESCRIPTION_ID> <TT_VALUE_ON>@TT_Package.GT_STATE_RETRACTED</TT_VALUE_ON> <TT_VALUE_OFF>@TT_Package.GT_STATE_EXTENDED</TT_VALUE_OFF> <TT_VALUE_ONOFF_IS_DYNAMIC>False</TT_VALUE_ONOFF_IS_DYNAMIC> <SET_STATE_EXTERNAL>p0 (>K:SET_WING_FOLD)</SET_STATE_EXTERNAL> <GET_STATE_EXTERNAL>(A:FOLDING WING HANDLE POSITION, Boolean) sp0</GET_STATE_EXTERNAL> <WWISE_EVENT_1>wing_fold_switch_on</WWISE_EVENT_1> <WWISE_EVENT_2>wing_fold_switch_off</WWISE_EVENT_2> <BINDING_SET_0>Toggle_KeyEvent</BINDING_SET_0> <BINDING_SET_0_PARAM_0>(B:HANDLING_Lever_WingFold) !</BINDING_SET_0_PARAM_0> <BINDING_SET_0_PARAM_0_IS_DYNAMIC>True</BINDING_SET_0_PARAM_0_IS_DYNAMIC> <BINDING_SET_0_EVENT_ID>TOGGLE_WING_FOLD</BINDING_SET_0_EVENT_ID> <BINDING_SET_1>Set</BINDING_SET_1> <BINDING_SET_1_PARAM_0>p0 0 !=</BINDING_SET_1_PARAM_0> <BINDING_SET_1_PARAM_0_IS_DYNAMIC>True</BINDING_SET_1_PARAM_0_IS_DYNAMIC> <BINDING_SET_1_EVENT_ID>SET_WING_FOLD</BINDING_SET_1_EVENT_ID> <SIMVAR_TO_WATCH_0>FOLDING WING HANDLE POSITION</SIMVAR_TO_WATCH_0> </UseTemplate> </Template>

    Parameters initialization:

    • Default Parameters set:

      • NODE_ID
      • ANIM_NAME

     

    Templates used:

    • ASOBO_Handling_Base_Template Parameters set:

      • IE_NAME
      • INTERACTION_TYPE
      • TOOLTIP_TITLE
      • TT_DESCRIPTION_ID
      • TT_VALUE_ON
      • TT_VALUE_OFF
      • TT_VALUE_ONOFF_IS_DYNAMIC
      • SET_STATE_EXTERNAL
      • GET_STATE_EXTERNAL
      • WWISE_EVENT_1
      • WWISE_EVENT_2
      • BINDING_SET_0
      • BINDING_SET_0_PARAM_0
      • BINDING_SET_0_PARAM_0_IS_DYNAMIC
      • BINDING_SET_0_EVENT_ID
      • BINDING_SET_1
      • BINDING_SET_1_PARAM_0
      • BINDING_SET_1_PARAM_0_IS_DYNAMIC
      • BINDING_SET_1_EVENT_ID
      • SIMVAR_TO_WATCH_0

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Wipers_Controller_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Wipers_Controller_Template”> <Parameters Type=“Default”> <ID>1</ID> </Parameters> <UseTemplate Name=“ASOBO_HANDLING_Wipers_Controller_SubTemplate”/> </Template>

    Parameters initialization:

    • Default Parameters set:

      • ID

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Switch_Wipers_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Switch_Wipers_Template”> <UseTemplate Name=“ASOBO_HANDLING_Wipers_Controller_Template”> <INTERACTION_TYPE>Switch</INTERACTION_TYPE> </UseTemplate> </Template>

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Knob_Wipers_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Knob_Wipers_Template”> <UseTemplate Name=“ASOBO_HANDLING_Wipers_Controller_Template”> <INTERACTION_TYPE>Knob</INTERACTION_TYPE> </UseTemplate> </Template>

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Launch_Bar_Retract_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Launch_Bar_Retract_Template”> <Parameters Type=“Default”> <NODE_ID>HANDLING_Launch_Bar_Retract</NODE_ID> <ANIM_NAME>HANDLING_Launch_Bar_Retract</ANIM_NAME> <TT_DESCRIPTION_ID>@TT_Package.LAUNCH_BAR_ACTION</TT_DESCRIPTION_ID> </Parameters> <UseTemplate Name=“ASOBO_Handling_Base_Template”> <IE_NAME>Lever_LaunchBar</IE_NAME> <INTERACTION_TYPE>Switch</INTERACTION_TYPE> <TOOLTIP_TITLE>@TT_Package.LAUNCH_BAR_TITLE</TOOLTIP_TITLE> <TT_VALUE_ON>@TT_Package.GT_STATE_EXTENDED</TT_VALUE_ON> <TT_VALUE_OFF>@TT_Package.GT_STATE_RETRACTED</TT_VALUE_OFF> <TT_VALUE_ONOFF_IS_DYNAMIC>False</TT_VALUE_ONOFF_IS_DYNAMIC> <SET_STATE_EXTERNAL>p0 (>K:SET_LAUNCH_BAR_SWITCH)</SET_STATE_EXTERNAL> <GET_STATE_EXTERNAL>(A:LAUNCHBAR SWITCH, Boolean) sp0</GET_STATE_EXTERNAL> <WWISE_EVENT_1>launchbar_switch_on</WWISE_EVENT_1> <WWISE_EVENT_2>launchbar_switch_off</WWISE_EVENT_2> <BINDING_SET_0>Toggle_KeyEvent</BINDING_SET_0> <BINDING_SET_0_PARAM_0>(B:HANDLING_Lever_LaunchBar) !</BINDING_SET_0_PARAM_0> <BINDING_SET_0_PARAM_0_IS_DYNAMIC>True</BINDING_SET_0_PARAM_0_IS_DYNAMIC> <BINDING_SET_0_EVENT_ID>TOGGLE_LAUNCH_BAR_SWITCH</BINDING_SET_0_EVENT_ID> <BINDING_SET_1>Set</BINDING_SET_1> <BINDING_SET_1_PARAM_0>p0 0 !=</BINDING_SET_1_PARAM_0> <BINDING_SET_1_PARAM_0_IS_DYNAMIC>True</BINDING_SET_1_PARAM_0_IS_DYNAMIC> <BINDING_SET_1_EVENT_ID>SET_LAUNCH_BAR_SWITCH</BINDING_SET_1_EVENT_ID> <SIMVAR_TO_WATCH_0>LAUNCHBAR SWITCH</SIMVAR_TO_WATCH_0> </UseTemplate> </Template>

    Parameters initialization:

    • Default Parameters set:

      • NODE_ID
      • ANIM_NAME
      • TT_DESCRIPTION_ID

     

    Templates used:

    • ASOBO_Handling_Base_Template Parameters set:

      • IE_NAME
      • INTERACTION_TYPE
      • TOOLTIP_TITLE
      • TT_VALUE_ON
      • TT_VALUE_OFF
      • TT_VALUE_ONOFF_IS_DYNAMIC
      • SET_STATE_EXTERNAL
      • GET_STATE_EXTERNAL
      • WWISE_EVENT_1
      • WWISE_EVENT_2
      • BINDING_SET_0
      • BINDING_SET_0_PARAM_0
      • BINDING_SET_0_PARAM_0_IS_DYNAMIC
      • BINDING_SET_0_EVENT_ID
      • BINDING_SET_1
      • BINDING_SET_1_PARAM_0
      • BINDING_SET_1_PARAM_0_IS_DYNAMIC
      • BINDING_SET_1_EVENT_ID
      • SIMVAR_TO_WATCH_0

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_TailHook_Lever_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_TailHook_Lever_Template”> <Parameters Type=“Default”> <NODE_ID>HANDLING_TailHook_Lever</NODE_ID> <ANIM_NAME>HANDLING_TailHook_Lever</ANIM_NAME> <TT_DESCRIPTION_ID>@TT_Package.TAIL_HOOK_ACTION</TT_DESCRIPTION_ID> </Parameters> <UseTemplate Name=“ASOBO_Handling_Base_Template”> <IE_NAME>Lever_TailHook</IE_NAME> <INTERACTION_TYPE>Switch</INTERACTION_TYPE> <TOOLTIP_TITLE>@TT_Package.TAIL_HOOK_TITLE</TOOLTIP_TITLE> <TT_VALUE_ON>@TT_Package.GT_STATE_EXTENDED</TT_VALUE_ON> <TT_VALUE_OFF>@TT_Package.GT_STATE_RETRACTED</TT_VALUE_OFF> <TT_VALUE_ONOFF_IS_DYNAMIC>False</TT_VALUE_ONOFF_IS_DYNAMIC> <SET_STATE_EXTERNAL>p0 (>K:SET_TAIL_HOOK_HANDLE)</SET_STATE_EXTERNAL> <GET_STATE_EXTERNAL>(A:TAILHOOK HANDLE, Boolean) sp0</GET_STATE_EXTERNAL> <WWISE_EVENT_1>tailhook_switch_on</WWISE_EVENT_1> <WWISE_EVENT_2>tailhook_switch_off</WWISE_EVENT_2> <BINDING_SET_0>Toggle_KeyEvent</BINDING_SET_0> <BINDING_SET_0_PARAM_0>(B:HANDLING_Lever_TailHook) !</BINDING_SET_0_PARAM_0> <BINDING_SET_0_PARAM_0_IS_DYNAMIC>True</BINDING_SET_0_PARAM_0_IS_DYNAMIC> <BINDING_SET_0_EVENT_ID>TOGGLE_TAIL_HOOK_HANDLE</BINDING_SET_0_EVENT_ID> <BINDING_SET_1>Set</BINDING_SET_1> <BINDING_SET_1_PARAM_0>p0 0 !=</BINDING_SET_1_PARAM_0> <BINDING_SET_1_PARAM_0_IS_DYNAMIC>True</BINDING_SET_1_PARAM_0_IS_DYNAMIC> <BINDING_SET_1_EVENT_ID>SET_TAIL_HOOK_HANDLE</BINDING_SET_1_EVENT_ID> <SIMVAR_TO_WATCH_0>TAILHOOK HANDLE</SIMVAR_TO_WATCH_0> </UseTemplate> </Template>

    Parameters initialization:

    • Default Parameters set:

      • NODE_ID
      • ANIM_NAME
      • TT_DESCRIPTION_ID

     

    Templates used:

    • ASOBO_Handling_Base_Template Parameters set:

      • IE_NAME
      • INTERACTION_TYPE
      • TOOLTIP_TITLE
      • TT_VALUE_ON
      • TT_VALUE_OFF
      • TT_VALUE_ONOFF_IS_DYNAMIC
      • SET_STATE_EXTERNAL
      • GET_STATE_EXTERNAL
      • WWISE_EVENT_1
      • WWISE_EVENT_2
      • BINDING_SET_0
      • BINDING_SET_0_PARAM_0
      • BINDING_SET_0_PARAM_0_IS_DYNAMIC
      • BINDING_SET_0_EVENT_ID
      • BINDING_SET_1
      • BINDING_SET_1_PARAM_0
      • BINDING_SET_1_PARAM_0_IS_DYNAMIC
      • BINDING_SET_1_EVENT_ID
      • SIMVAR_TO_WATCH_0

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Trim_Reset_Push_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Trim_Reset_Push_Template”> <Parameters Type=“Default”> <NODE_ID>HANDLING_Push_Trim_Reset</NODE_ID> <ANIM_NAME>HANDLING_Push_Trim_Reset</ANIM_NAME> <RUDDER_RESET_VALUE>0</RUDDER_RESET_VALUE> <ELEVATOR_RESET_VALUE>0</ELEVATOR_RESET_VALUE> <AILERON_RESET_VALUE>0</AILERON_RESET_VALUE> <RUDDER_RESET/> <ELEVATOR_RESET/> <AILERON_RESET/> <WWISE_EVENT_1>trim_reset_push_button_on</WWISE_EVENT_1> <WWISE_EVENT_2>trim_reset_push_button_off</WWISE_EVENT_2> <TT_DESCRIPTION_ID>@TT_Package.HANDLING_PUSH_TRIMRESET_ACTION</TT_DESCRIPTION_ID> </Parameters> <Parameters Type=“Override”> <Condition Valid=“NO_RUDDER_RESET”> <False> <RUDDER_RESET>#RUDDER_RESET_VALUE# (>K:RUDDER_TRIM_SET)</RUDDER_RESET> </False> </Condition> <Condition Valid=“NO_RUDDER_ELEVATOR”> <False> <ELEVATOR_RESET>#ELEVATOR_RESET_VALUE# (>K:ELEVATOR_TRIM_SET)</ELEVATOR_RESET> </False> </Condition> <Condition Valid=“NO_AILERON_RESET”> <False> <AILERON_RESET>#AILERON_RESET_VALUE# (>K:AILERON_TRIM_SET)</AILERON_RESET> </False> </Condition> </Parameters> <UseTemplate Name=“ASOBO_Handling_Base_Template”> <IE_NAME>HANDLING_Trim_Reset</IE_NAME> <INTERACTION_TYPE>Push</INTERACTION_TYPE> <TOOLTIP_TITLE>@TT_Package.HANDLING_PUSH_TRIMRESET_TITLE</TOOLTIP_TITLE> <TT_DESCRIPTION_ID>#TT_DESCRIPTION_ID#</TT_DESCRIPTION_ID> <SET_STATE_EXTERNAL> #RUDDER_RESET# #AILERON_RESET# (A:SIM ON GROUND,Bool) if{ #ELEVATOR_RESET# } </SET_STATE_EXTERNAL> </UseTemplate> </Template>

    Parameters initialization:

    • Default Parameters set:

      • NODE_ID
      • ANIM_NAME
      • RUDDER_RESET_VALUE
      • ELEVATOR_RESET_VALUE
      • AILERON_RESET_VALUE
      • RUDDER_RESET
      • ELEVATOR_RESET
      • AILERON_RESET
      • WWISE_EVENT_1
      • WWISE_EVENT_2
      • TT_DESCRIPTION_ID

    • Override Condition: Valid(NO_RUDDER_RESET)

      • Case: False

        Parameters set:

        • RUDDER_RESET (using RUDDER_RESET_VALUE)

      Condition: Valid(NO_RUDDER_ELEVATOR)

      • Case: False

        Parameters set:

        • ELEVATOR_RESET (using ELEVATOR_RESET_VALUE)

      Condition: Valid(NO_AILERON_RESET)

      • Case: False

        Parameters set:

        • AILERON_RESET (using AILERON_RESET_VALUE)

     

    Templates used:

    • ASOBO_Handling_Base_Template Parameters set:

      • IE_NAME
      • INTERACTION_TYPE
      • TOOLTIP_TITLE
      • TT_DESCRIPTION_ID (using TT_DESCRIPTION_ID)
      • SET_STATE_EXTERNAL (using RUDDER_RESET, AILERON_RESET, ELEVATOR_RESET)

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Base_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Base_Template”> <Parameters Type=“Default”> <INPUT_EVENT_ID_SOURCE>HANDLING</INPUT_EVENT_ID_SOURCE> <WWISE_PREFIX>HANDLING</WWISE_PREFIX> </Parameters> <UseTemplate Name=“ASOBO_Interaction_Base_Template”> <USE_INPUT_EVENT_ID>HANDLING</USE_INPUT_EVENT_ID> </UseTemplate> </Template>

    Parameters initialization:

    • Default Parameters set:

      • INPUT_EVENT_ID_SOURCE
      • WWISE_PREFIX

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Push_Event_Base_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Push_Event_Base_Template”> <UseTemplate Name=“ASOBO_Interaction_Push_Event_Base_Template”> <USE_INPUT_EVENT_ID>HANDLING</USE_INPUT_EVENT_ID> </UseTemplate> </Template>

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Pull_Event_Base_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Pull_Event_Base_Template”> <UseTemplate Name=“ASOBO_Interaction_Pull_Event_Base_Template”> <USE_INPUT_EVENT_ID>HANDLING</USE_INPUT_EVENT_ID> </UseTemplate> </Template>

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Axis_Event_Base_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Axis_Event_Base_Template”> <Parameters Type=“Default”> <INPUT_EVENT_ID_SOURCE>HANDLING</INPUT_EVENT_ID_SOURCE> </Parameters> <UseTemplate Name=“ASOBO_Interaction_Axis_Event_Base_Template”> <USE_INPUT_EVENT_ID>HANDLING</USE_INPUT_EVENT_ID> </UseTemplate> </Template>

    Parameters initialization:

    • Default Parameters set:

      • INPUT_EVENT_ID_SOURCE

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Update_Unlock_Tailwheel

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Update_Unlock_Tailwheel”> <Parameters Type=“Default”> <ID>0</ID> <TAILWHEEL_LOCK_MAX_ANGLE>2</TAILWHEEL_LOCK_MAX_ANGLE> </Parameters> <Parameters Type=“Override”> <LOCK_CODE>(>K:TOGGLE_TAILWHEEL_LOCK)</LOCK_CODE> </Parameters> <Parameters Type=“Override”> <Condition> <Test> <Greater> <Number>#TAILWHEEL_LOCK_MAX_ANGLE#</Number> <Number>0</Number> </Greater> </Test> <True> <LOCK_CODE> l1 (A:GEAR STEER ANGLE:#ID#, degrees) abs #TAILWHEEL_LOCK_MAX_ANGLE# < or if{ (* Tailwheel only relocks when *) #LOCK_CODE# } </LOCK_CODE> </True> </Condition> </Parameters> <UseTemplate Name=“ASOBO_GT_Update”> <FREQUENCY>2</FREQUENCY> <UPDATE_CODE> (A:YOKE Y POSITION, percent) -90 < (A:TAILWHEEL LOCK ON, Bool) s1 == if{ #LOCK_CODE# } </UPDATE_CODE> </UseTemplate> </Template>

    Parameters initialization:

    • Default Parameters set:

      • ID
      • TAILWHEEL_LOCK_MAX_ANGLE

    • Override Parameters set:

      • LOCK_CODE

    • Override Condition: Test

      • Case: True

        Parameters set:

        • LOCK_CODE (using ID, TAILWHEEL_LOCK_MAX_ANGLE, LOCK_CODE)

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Switch_Water_Ballast_Template

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Switch_Water_Ballast_Template”> <Parameters Type=“Default”> <ID>1</ID> </Parameters> <Parameters Type=“Default”> <NODE_ID>Switch_Water_Ballast_#ID#</NODE_ID> <ANIM_NAME>Switch_Water_Ballast_#ID#</ANIM_NAME> <IE_NAME>Glider_Switch_Water_Ballast_#ID#</IE_NAME> <MIN_BALLAST_TO_TOGGLE>1</MIN_BALLAST_TO_TOGGLE> </Parameters> <Parameters Type=“Override”> <GET_STATE_EXTERNAL/> <SET_STATE_EXTERNAL/> </Parameters> <Parameters Type=“Override”> <Condition NotEmpty=“BALLAST_VALVE_ID_1”> <True> <Loop> <Setup> <Param>CUR_ID</Param> <From>1</From> <Inc>1</Inc> <While> <Arg Valid=“BALLAST_VALVE_ID_#CUR_ID#”/> </While> </Setup> <Do> <Parameters Type=“Default” Lifetime=“Loop”> <SET_STATE_EXTERNAL_T/> <GET_STATE_EXTERNAL_T>1</GET_STATE_EXTERNAL_T> </Parameters> <Parameters Type=“Override” Lifetime=“Loop”> <CUR_BALLAST_ID Process=“Param”>BALLAST_VALVE_ID_#CUR_ID#</CUR_BALLAST_ID> </Parameters> <Parameters Type=“Override” Lifetime=“Loop”> <SET_STATE_EXTERNAL_T>#SET_STATE_EXTERNAL_T# (A:WATER BALLAST VALVE:#CUR_BALLAST_ID#, Boolean) (O:HANDLING_#IE_NAME#_Position) != if{ #CUR_BALLAST_ID# (>K:TOGGLE_WATER_BALLAST_VALVE) }</SET_STATE_EXTERNAL_T> <GET_STATE_EXTERNAL_T>#GET_STATE_EXTERNAL_T# (A:WATER BALLAST VALVE:#CUR_BALLAST_ID#, Boolean) and</GET_STATE_EXTERNAL_T> </Parameters> </Do> <Then> <SET_STATE_EXTERNAL>#SET_STATE_EXTERNAL_T# sp0</SET_STATE_EXTERNAL> <GET_STATE_EXTERNAL>#GET_STATE_EXTERNAL_T#</GET_STATE_EXTERNAL> </Then> </Loop> </True> <False> <GET_STATE_EXTERNAL>(A:WATER BALLAST VALVE:#ID#) sp0</GET_STATE_EXTERNAL> <SET_STATE_EXTERNAL>(A:WATER BALLAST VALVE:#ID#, Boolean) (O:HANDLING_#IE_NAME#_Position) != if{ #ID# (>K:TOGGLE_WATER_BALLAST_VALVE) }</SET_STATE_EXTERNAL> </False> </Condition> </Parameters> <UseTemplate Name=“ASOBO_Handling_Base_Template”> <TOOLTIP_TITLE>@TT_Package.WATER_BALLAST_VALVE_TITLE</TOOLTIP_TITLE> <TT_DESCRIPTION_ID>@TT_Package.WATER_BALLAST_VALVE_ACTION</TT_DESCRIPTION_ID> <INTERACTION_TYPE>Switch</INTERACTION_TYPE> <TT_VALUE_ON>@TT_Package.GT_STATE_OPEN</TT_VALUE_ON> <TT_VALUE_OFF>@TT_Package.GT_STATE_CLOSED</TT_VALUE_OFF> <TT_VALUE_ONOFF_IS_DYNAMIC>False</TT_VALUE_ONOFF_IS_DYNAMIC> </UseTemplate> </Template>

    Parameters initialization:

    • Default Parameters set:

      • ID

    • Default Parameters set:

      • NODE_ID (using ID)
      • ANIM_NAME (using ID)
      • IE_NAME (using ID)
      • MIN_BALLAST_TO_TOGGLE

    • Override Parameters set:

      • GET_STATE_EXTERNAL
      • SET_STATE_EXTERNAL

    • Override Condition: NotEmpty(BALLAST_VALVE_ID_1)

      • Case: True

        Parameters read:

        • CUR_ID

        Parameters set:

        • CUR_ID
        • SET_STATE_EXTERNAL_T
        • GET_STATE_EXTERNAL_T
        • CUR_BALLAST_ID (using CUR_ID)
        • SET_STATE_EXTERNAL_T (using SET_STATE_EXTERNAL_T, CUR_BALLAST_ID, IE_NAME)
        • GET_STATE_EXTERNAL_T (using GET_STATE_EXTERNAL_T, CUR_BALLAST_ID)
        • SET_STATE_EXTERNAL (using SET_STATE_EXTERNAL_T)
        • GET_STATE_EXTERNAL (using GET_STATE_EXTERNAL_T)

      • Case: False

        Parameters set:

        • GET_STATE_EXTERNAL (using ID)
        • SET_STATE_EXTERNAL (using ID, IE_NAME)

     

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_HANDLING_Push_Tow_Release

    Definition from XML

    <Template Name=“ASOBO_HANDLING_Push_Tow_Release”> <Parameters Type=“Default”> <NODE_ID/> <ANIM_NAME/> <ID>1</ID> </Parameters> <Parameters Type=“Default”> <TOOLTIP_TITLE>@TT_Package.TOW_RELEASE_TITLE</TOOLTIP_TITLE> <TT_DESCRIPTION_ID>@TT_Package.TOW_RELEASE_ACTION</TT_DESCRIPTION_ID> <TT_VALUE>(A:TOW CONNECTION, Bool) if{ (R:1:@TT_Package.GT_STATE_CONNECTED) } els{ (R:1:@TT_Package.GT_STATE_RELEASED) }</TT_VALUE> <TT_VALUE_IS_DYNAMIC>True</TT_VALUE_IS_DYNAMIC> </Parameters> <Parameters Type=“Override”> <INPUT_EVENT_ID_SOURCE>HANDLING</INPUT_EVENT_ID_SOURCE> <WWISE_PREFIX>Tow_Release</WWISE_PREFIX> <IE_NAME>Tow_Release</IE_NAME> </Parameters> <UseTemplate Name=“ASOBO_Handling_Base_Template”> <INTERACTION_TYPE>Push</INTERACTION_TYPE> <CREATE_COMPONENT>True</CREATE_COMPONENT> <SET_STATE_EXTERNAL>(>K:TOW_PLANE_RELEASE)</SET_STATE_EXTERNAL> <GET_STATE_EXTERNAL>(A:TOW RELEASE HANDLE,percent over 100) (>O:_ButtonAnimVar)</GET_STATE_EXTERNAL> <SIMVAR_TO_WATCH_0>TOW RELEASE HANDLE</SIMVAR_TO_WATCH_0> </UseTemplate> </Template>

    Parameters initialization:

    • Default Parameters set:

      • NODE_ID
      • ANIM_NAME
      • ID

    • Default Parameters set:

      • TOOLTIP_TITLE
      • TT_DESCRIPTION_ID
      • TT_VALUE
      • TT_VALUE_IS_DYNAMIC

    • Override Parameters set:

      • INPUT_EVENT_ID_SOURCE
      • WWISE_PREFIX
      • IE_NAME

     

    Templates used:

    [Go back to top] [Go back to index]

 

Prev
Fuel.xml
Next
Index.xml