ParametersFnHelpers
Asobo_EX1\Base\Helper\ParametersFnHelpers.xml
Source XML
<ModelBehaviors>
<!-- IN: PFN_PARAM_DEFAULT (Default parametersFn to call) -->
<!-- IN: PFN_PARAM_NAME (Name of the parameter users can override to call a different parametersFn than the default) -->
<!-- OUT: Output of the selected parametersFn -->
<ParametersFn Name="ASOBO_PFN_Call_Overridable_ParametersFn_Helper">
<Parameters Type="Default">
<#PFN_PARAM_NAME#>#PFN_PARAM_DEFAULT#</#PFN_PARAM_NAME#>
</Parameters>
<Parameters Type="Override">
<__FN_NAME__ Process="Param">#PFN_PARAM_NAME#</__FN_NAME__>
</Parameters>
<ReturnParameters>
<UseParametersFn Name="#__FN_NAME__#">
<PFN_PARAM_NAME/>
</UseParametersFn>
</ReturnParameters>
</ParametersFn>
<!-- IN: PFN_TO_CALL (parametersFn to call) -->
<!-- IN: PFN_PARAM_NAME (Name of the parameter users can override to call a different parametersFn than the default) -->
<!-- OUT: Output of the selected parametersFn -->
<ParametersFn Name="ASOBO_PFN_Call_Overridable_ParametersFn_No_Default_Helper">
<Parameters Type="Override">
<__FN_NAME__ Process="Param">#PFN_PARAM_NAME#</__FN_NAME__>
</Parameters>
<ReturnParameters>
<Condition NotEmpty="__FN_NAME__">
<UseParametersFn Name="#__FN_NAME__#">
<PFN_PARAM_NAME/>
</UseParametersFn>
</Condition>
</ReturnParameters>
</ParametersFn>
<!-- IN: IN_PARAM_NAME (Parameter to lookup the value of) -->
<!-- IN: IN_PARAM_ID (Parameter ID to add) -->
<!-- IN: OUT_PARAM_PREFIX (Prefix) -->
<!-- IN: OUT_PARAM_SUFFIX (Suffix) -->
<!-- IN (opt): APPEND_SEPARATOR (if False will not append anything in between IN_PARAM_ID and OUT_PARAM_PREFIX & OUT_PARAM_SUFFIX) -->
<!-- IN (opt): PREFIX_SEPARATOR (in between OUT_PARAM_PREFIX and IN_PARAM_ID) -->
<!-- IN (opt): SUFFIX_SEPARATOR (in between IN_PARAM_ID and OUT_PARAM_SUFFIX ) -->
<!-- OUT: Parameter with concatenated ID -->
<ParametersFn Name="ASOBO_PFN_Add_ID_To_Parameter_Helper">
<Parameters Type="Default">
<Switch>
<Case Valid="PREFIX_ID">
<OUT_PARAM_PREFIX/>
<OUT_PARAM_SUFFIX>#IN_PARAM_NAME#</OUT_PARAM_SUFFIX>
</Case>
<Default>
<OUT_PARAM_PREFIX>#IN_PARAM_NAME#</OUT_PARAM_PREFIX>
<OUT_PARAM_SUFFIX/>
</Default>
</Switch>
<APPEND_SEPARATOR>True</APPEND_SEPARATOR>
</Parameters>
<Parameters Type="Default">
<Condition Valid="APPEND_SEPARATOR">
<Condition NotEmpty="OUT_PARAM_PREFIX">
<PREFIX_SEPARATOR>_</PREFIX_SEPARATOR>
</Condition>
<Condition NotEmpty="OUT_PARAM_SUFFIX">
<SUFFIX_SEPARATOR>_</SUFFIX_SEPARATOR>
</Condition>
</Condition>
</Parameters>
<Parameters Type="Default">
<PREFIX_SEPARATOR/>
<SUFFIX_SEPARATOR/>
</Parameters>
<Parameters Type="Override">
<__PARAM_VALUE__ Process="Param">#IN_PARAM_NAME#</__PARAM_VALUE__>
<__PARAM_ID__>#IN_PARAM_ID#</__PARAM_ID__>
</Parameters>
<Parameters Type="Override">
<__PARAM_ID__>#PREFIX_SEPARATOR##__PARAM_ID__##SUFFIX_SEPARATOR#</__PARAM_ID__>
</Parameters>
<Parameters Type="Override">
<__PARAM_NAME__>#OUT_PARAM_PREFIX##__PARAM_ID__##OUT_PARAM_SUFFIX#</__PARAM_NAME__>
</Parameters>
<ReturnParameters>
<#__PARAM_NAME__#>#__PARAM_VALUE__#</#__PARAM_NAME__#>
</ReturnParameters>
</ParametersFn>
<!-- Same as ASOBO_PFN_Add_ID_To_Parameter_Helper but for multiple parameters at a time -->
<!-- IN: Same parameters but all suffixed with an index (starting at 0) ex: IN_PARAM_NAME becomes IN_PARAM_NAME_0, IN_PARAM_NAME_1, ... -->
<ParametersFn Name="ASOBO_PFN_Add_ID_To_Parameters_Helper">
<Parameters Type="Default">
<ELTS_COUNT>512</ELTS_COUNT>
<FIRST_ID>0</FIRST_ID>
</Parameters>
<ReturnParameters>
<Loop>
<Setup>
<Param>CUR_ID</Param>
<From>#FIRST_ID#</From>
<Inc>1</Inc>
<To>#ELTS_COUNT#</To>
<While>
<Arg Check="IN_PARAM_#CUR_ID#_NAME"/>
</While>
</Setup>
<Do>
<UseParametersFn Name="ASOBO_PFN_Add_ID_To_Parameter_Helper">
<IN_PARAM_NAME Process="Param">IN_PARAM_#CUR_ID#_NAME</IN_PARAM_NAME>
<Condition Check="IN_PARAM_#CUR_ID#_ID">
<IN_PARAM_ID Process="Param">IN_PARAM_#CUR_ID#_ID</IN_PARAM_ID>
</Condition>
<Condition Check="OUT_PARAM_#CUR_ID#_PREFIX">
<OUT_PARAM_PREFIX Process="Param">OUT_PARAM_#CUR_ID#_PREFIX</OUT_PARAM_PREFIX>
</Condition>
<Condition Check="OUT_PARAM_#CUR_ID#_SUFFIX">
<OUT_PARAM_SUFFIX Process="Param">OUT_PARAM_#CUR_ID#_SUFFIX</OUT_PARAM_SUFFIX>
</Condition>
<Condition Check="OUT_PARAM_#CUR_ID#_PREFIX_SEPARATOR">
<PREFIX_SEPARATOR Process="Param">OUT_PARAM_#CUR_ID#_PREFIX_SEPARATOR</PREFIX_SEPARATOR>
</Condition>
<Condition Check="OUT_PARAM_#CUR_ID#_SUFFIX_SEPARATOR">
<SUFFIX_SEPARATOR Process="Param">OUT_PARAM_#CUR_ID#_SUFFIX_SEPARATOR</SUFFIX_SEPARATOR>
</Condition>
</UseParametersFn>
</Do>
</Loop>
</ReturnParameters>
</ParametersFn>
<!-- IN: IN_PARAM_NAME (Name of the param to unindex) -->
<!-- OUT: Unindexed parameter -->
<ParametersFn Name="ASOBO_PFN_Remove_ID_From_Parameter_Helper">
<Parameters Type="Default">
<OUT_PARAM_NAME>#IN_PARAM_NAME#</OUT_PARAM_NAME>
</Parameters>
<ReturnParameters>
<Switch>
<Case Valid="PREFIXED_ID">
<Condition Check="#IN_PARAM_ID#_#IN_PARAM_NAME#">
<#OUT_PARAM_NAME# Process="Param">#IN_PARAM_ID#_#IN_PARAM_NAME#</#OUT_PARAM_NAME#>
</Condition>
</Case>
<Default>
<Condition Check="#IN_PARAM_NAME#_#IN_PARAM_ID#">
<#OUT_PARAM_NAME# Process="Param">#IN_PARAM_NAME#_#IN_PARAM_ID#</#OUT_PARAM_NAME#>
</Condition>
</Default>
</Switch>
</ReturnParameters>
</ParametersFn>
<!-- IN: IN_PARAM_0_NAME, IN_PARAM_1_NAME, ... (Name of the params to unindex) -->
<ParametersFn Name="ASOBO_PFN_Remove_ID_From_Parameters_Helper">
<Parameters Type="Default">
<ELTS_COUNT>512</ELTS_COUNT>
<FIRST_ID>0</FIRST_ID>
</Parameters>
<ReturnParameters>
<Loop>
<Setup>
<Param>CUR_ID</Param>
<From>#FIRST_ID#</From>
<To>#ELTS_COUNT#</To>
<Inc>1</Inc>
<While>
<Arg NotEmpty="IN_PARAM_#CUR_ID#_NAME"/>
</While>
</Setup>
<Do>
<UseParametersFn Name="ASOBO_PFN_Remove_ID_From_Parameter_Helper">
<IN_PARAM_NAME Process="Param">IN_PARAM_#CUR_ID#_NAME</IN_PARAM_NAME>
<Condition Check="IN_PARAM_#CUR_ID#_ID">
<IN_PARAM_ID Process="Param">IN_PARAM_#CUR_ID#_ID</IN_PARAM_ID>
</Condition>
</UseParametersFn>
</Do>
</Loop>
</ReturnParameters>
</ParametersFn>
<!-- In itself doesn't do anything other than return the value as it was provided -->
<!-- In practice it is used w/ ASOBO_PFN_Call_Overridable_ParametersFn_Helper to let users change a value right before it is actually used -->
<!-- IN: IN_PARAM_NAME (Name of the parameter to forward) -->
<!-- IN (opt): OUT_PARAM_NAME (Output Name of the parameter to forward) -->
<ParametersFn Name="ASOBO_PFN_Return_Parameter_No_Transform_Helper">
<Parameters Type="Default">
<OUT_PARAM_NAME>#IN_PARAM_NAME#</OUT_PARAM_NAME>
</Parameters>
<ReturnParameters>
<#OUT_PARAM_NAME# Process="Param">#IN_PARAM_NAME#</#OUT_PARAM_NAME#>
</ReturnParameters>
</ParametersFn>
<!-- Same as ASOBO_PFN_Return_Parameter_No_Transform_Helper but for multiple parameters at a time -->
<!-- IN: IN_PARAM_NAME_0, IN_PARAM_NAME_1, ... (Name of the parameters to forward) -->
<ParametersFn Name="ASOBO_PFN_Return_Parameters_No_Transform_Helper">
<ReturnParameters>
<Loop>
<Setup>
<Param>CUR_ID</Param>
<From>0</From>
<Inc>1</Inc>
<While>
<Arg Check="IN_PARAM_NAME_#CUR_ID#"/>
</While>
</Setup>
<Do>
<UseParametersFn Name="ASOBO_PFN_Return_Parameter_No_Transform_Helper">
<IN_PARAM_NAME Process="Param">IN_PARAM_NAME_#CUR_ID#</IN_PARAM_NAME>
</UseParametersFn>
</Do>
</Loop>
</ReturnParameters>
</ParametersFn>
<!-- IN (opt): IN_PARAM_NAME_ID (ID used for generating the SUFFIX_ID) -->
<!-- IN (opt): OUT_PARAM_VALUE_PREFIX (Prefix given to the input IN_PARAM_NAME_ID value) -->
<!-- IN (opt): OUT_PARAM_VALUE_SUFFIX (Suffix given to the input IN_PARAM_NAME_ID value) -->
<!-- IN (opt): OUT_PARAM_NAME (Name given to the parameter in the output) -->
<!-- OUT: SUFFIX_ID -->
<ParametersFn Name="ASOBO_Indexer_Helper">
<Parameters Type="Default">
<OUT_PARAM_VALUE_PREFIX>_</OUT_PARAM_VALUE_PREFIX>
<OUT_PARAM_VALUE_SUFFIX/>
</Parameters>
<Parameters Type="Override">
<__PARAM_VALUE__ Process="Param">#IN_PARAM_NAME_ID#</__PARAM_VALUE__>
</Parameters>
<Parameters Type="Default">
<OUT_PARAM_NAME>SUFFIX_#IN_PARAM_NAME_ID#</OUT_PARAM_NAME>
</Parameters>
<ReturnParameters>
<#OUT_PARAM_NAME#>#OUT_PARAM_VALUE_PREFIX##__PARAM_VALUE__##OUT_PARAM_VALUE_SUFFIX#</#OUT_PARAM_NAME#>
<#IN_PARAM_NAME_ID# Process="Param">#IN_PARAM_NAME_ID#</#IN_PARAM_NAME_ID#>
</ReturnParameters>
</ParametersFn>
<!-- IN: PFN_TO_CALL (pfn to call for each element) -->
<!-- IN: PFN_GET_PARAMETERS (PFN to call to get a list of parameters) -->
<!-- IN (opt): OUT_PARAM_NAME (Name of the parameter containing the parameter name) -->
<!-- IN (opt): OUT_PARAM_VALUE (Name of the parameter containing the parameter value) -->
<!-- IN (opt): OUT_PARAM_ID (Name of the parameter containing the parameter id) -->
<ParametersFn Name="ASOBO_For_Each_Of_PFN_Helper">
<Parameters Type="Default">
<OUT_PARAM_NAME>PARAM_NAME</OUT_PARAM_NAME>
<OUT_PARAM_VALUE>PARAM_VALUE</OUT_PARAM_VALUE>
<OUT_PARAM_ID>PARAM_ID</OUT_PARAM_ID>
</Parameters>
<ReturnParameters>
<Loop>
<Setup>
<Param>PARAM</Param>
<Value>VALUE</Value>
<Parameters>
<UseParametersFn Name="#PFN_GET_PARAMETERS#"/>
</Parameters>
</Setup>
<Do>
<Parameters Type="Override" Lifetime="Loop">
<UseParametersFn Name="ASOBO_Increment_ID_Helper"/>
</Parameters>
<UseParametersFn Name="#PFN_TO_CALL#">
<#OUT_PARAM_NAME#>#PARAM#</#OUT_PARAM_NAME#>
<#OUT_PARAM_ID#>#CUR_ID#</#OUT_PARAM_ID#>
<#OUT_PARAM_VALUE#>#VALUE#</#OUT_PARAM_VALUE#>
</UseParametersFn>
</Do>
</Loop>
</ReturnParameters>
</ParametersFn>
<!-- IN (opt): OUT_PARAM_ID_NAME (Name to give to the loop index parameter) -->
<!-- IN (opt): OUT_FIRST_ID (First ID that will be assigned if the variable doesn't exist) -->
<!-- IN (opt): INCREMENT_COUNT (How many increments) -->
<ParametersFn Name="ASOBO_Increment_ID_Helper">
<Parameters Type="Default">
<OUT_PARAM_ID_NAME>CUR_ID</OUT_PARAM_ID_NAME>
<OUT_FIRST_ID>0</OUT_FIRST_ID>
<INCREMENT_COUNT>1</INCREMENT_COUNT>
</Parameters>
<Parameters Type="Override">
<Condition Check="#OUT_PARAM_ID_NAME#">
<CUR_VALUE Process="Param">#OUT_PARAM_ID_NAME#</CUR_VALUE>
</Condition>
</Parameters>
<ReturnParameters>
<Condition Check="#OUT_PARAM_ID_NAME#">
<True>
<#OUT_PARAM_ID_NAME# Process="Int">#CUR_VALUE# #INCREMENT_COUNT# +</#OUT_PARAM_ID_NAME#>
</True>
<False>
<#OUT_PARAM_ID_NAME#>#OUT_FIRST_ID#</#OUT_PARAM_ID_NAME#>
</False>
</Condition>
</ReturnParameters>
</ParametersFn>
<!-- IN (opt): TOKEN_PREFIX (Param prefix to look for) -->
<!-- IN (opt): TOKEN_SUFFIX (Param suffix to look for) -->
<!-- OUT: TOKEN_COUNT (number of loop iterations) -->
<!-- OUT: LAST_TOKEN_ID (last valid id iterated on) -->
<ParametersFn Name="ASOBO_Count_Token_Helper">
<Parameters Type="Default">
<FROM>0</FROM>
<INC>1</INC>
<TOKEN_PREFIX/>
<TOKEN_SUFFIX/>
<OUT_PARAM_NAME_COUNT>TOKEN_COUNT</OUT_PARAM_NAME_COUNT>
<OUT_PARAM_NAME_LAST_ID>LAST_TOKEN_ID</OUT_PARAM_NAME_LAST_ID>
</Parameters>
<ReturnParameters>
<Loop>
<Setup>
<Param>CUR_ID</Param>
<From>#FROM#</From>
<Inc>#INC#</Inc>
<While>
<Arg NotEmpty="#TOKEN_PREFIX##CUR_ID##TOKEN_SUFFIX#"/>
</While>
</Setup>
<Do/>
<Then>
<#OUT_PARAM_NAME_COUNT# Process="Int">#CUR_ID# #FROM# -</#OUT_PARAM_NAME_COUNT#>
<#OUT_PARAM_NAME_LAST_ID# Process="Int">#CUR_ID# 1 -</#OUT_PARAM_NAME_LAST_ID#>
</Then>
</Loop>
</ReturnParameters>
</ParametersFn>
<!-- IN: TOKEN_COLLECTION (save containing parameters) -->
<!-- IN (opt): TOKEN_PREFIX (Param prefix to look for) -->
<!-- IN (opt): TOKEN_SUFFIX (Param suffix to look for) -->
<!-- OUT: TOKEN_COUNT (number of loop iterations) -->
<ParametersFn Name="ASOBO_Count_Token_In_Save_Helper">
<Parameters Type="Default">
<FROM>0</FROM>
<INC>1</INC>
<TOKEN_PREFIX/>
<TOKEN_SUFFIX/>
<OUT_PARAM_NAME_COUNT>TOKEN_COUNT</OUT_PARAM_NAME_COUNT>
<OUT_PARAM_NAME_LAST_ID>LAST_TOKEN_ID</OUT_PARAM_NAME_LAST_ID>
</Parameters>
<Parameters Type="Override">
<LoadParameters ID="#TOKEN_COLLECTION#"/>
</Parameters>
<ReturnParameters>
<Loop>
<Setup>
<Param>CUR_ID</Param>
<From>#FROM#</From>
<Inc>#INC#</Inc>
<While>
<Arg NotEmpty="#TOKEN_PREFIX##CUR_ID##TOKEN_SUFFIX#"/>
</While>
</Setup>
<Do/>
<Then>
<#OUT_PARAM_NAME_COUNT# Process="Int">#CUR_ID# #FROM# -</#OUT_PARAM_NAME_COUNT#>
<#OUT_PARAM_NAME_LAST_ID# Process="Int">#CUR_ID# 1 -</#OUT_PARAM_NAME_LAST_ID#>
</Then>
</Loop>
</ReturnParameters>
</ParametersFn>
<!-- IN (opt): TOKEN_PREFIX (Param prefix to look for) -->
<!-- IN (opt): TOKEN_SUFFIX (Param suffix to look for) -->
<!-- IN (req:Number): parameters have to be numbers -->
<!-- OUT: TOKEN_MIN (Minimum value found) -->
<!-- OUT: TOKEN_MAX (Maximum value found) -->
<!-- OUT: TOKEN_COUNT (number of loop iterations) -->
<!-- OUT: LAST_TOKEN_ID (last valid id iterated on) -->
<ParametersFn Name="ASOBO_Find_Min_Max_Helper">
<Parameters Type="Default">
<MIN_INIT_VALUE>1000000</MIN_INIT_VALUE>
<MAX_INIT_VALUE>-1000000</MAX_INIT_VALUE>
<FROM>0</FROM>
<INC>1</INC>
<TOKEN_PREFIX/>
<TOKEN_SUFFIX/>
<OUT_PARAM_NAME_COUNT>TOKEN_COUNT</OUT_PARAM_NAME_COUNT>
<OUT_PARAM_NAME_LAST_ID>LAST_TOKEN_ID</OUT_PARAM_NAME_LAST_ID>
<OUT_PARAM_NAME_MIN>TOKEN_MIN</OUT_PARAM_NAME_MIN>
<OUT_PARAM_NAME_MAX>TOKEN_MAX</OUT_PARAM_NAME_MAX>
</Parameters>
<Parameters Type="Override">
<__MIN__>#MIN_INIT_VALUE#</__MIN__>
<__MAX__>#MAX_INIT_VALUE#</__MAX__>
</Parameters>
<ReturnParameters>
<Loop>
<Setup>
<Param>CUR_ID</Param>
<From>#FROM#</From>
<Inc>#INC#</Inc>
<While>
<Arg Check="#TOKEN_PREFIX##CUR_ID##TOKEN_SUFFIX#"/>
</While>
</Setup>
<Do>
<Parameters Type="Override">
<PARAM_VALUE Process="Param">#TOKEN_PREFIX##CUR_ID##TOKEN_SUFFIX#</PARAM_VALUE>
</Parameters>
<Parameters Type="Override" Lifetime="Loop">
<Condition>
<Test>
<Lower>
<Number>#PARAM_VALUE#</Number>
<Number>#__MIN__#</Number>
</Lower>
</Test>
<True>
<__MIN__>#PARAM_VALUE#</__MIN__>
</True>
</Condition>
<Condition>
<Test>
<Greater>
<Number>#PARAM_VALUE#</Number>
<Number>#__MAX__#</Number>
</Greater>
</Test>
<True>
<__MAX__>#PARAM_VALUE#</__MAX__>
</True>
</Condition>
</Parameters>
</Do>
<Then>
<#OUT_PARAM_NAME_LAST_ID# Process="Int">#CUR_ID# 1 -</#OUT_PARAM_NAME_LAST_ID#>
<#OUT_PARAM_NAME_COUNT#>#CUR_ID#</#OUT_PARAM_NAME_COUNT#>
<#OUT_PARAM_NAME_MIN#>#__MIN__#</#OUT_PARAM_NAME_MIN#>
<#OUT_PARAM_NAME_MAX#>#__MAX__#</#OUT_PARAM_NAME_MAX#>
</Then>
</Loop>
</ReturnParameters>
</ParametersFn>
<!-- Same as ASOBO_Find_Min_Max_Helper but looking for a specific save -->
<!-- IN : SAVED_PARAMETERS (Param prefix to look for) -->
<!-- OUT: TOKEN_MIN (Minimum value found) -->
<!-- OUT: TOKEN_MAX (Maximum value found) -->
<!-- OUT: TOKEN_COUNT (number of loop iterations) -->
<!-- OUT: LAST_TOKEN_ID (last valid id iterated on) -->
<ParametersFn Name="ASOBO_Find_Min_Max_Helper_In">
<Parameters Type="Default">
<MIN_INIT_VALUE>1000000</MIN_INIT_VALUE>
<MAX_INIT_VALUE>-1000000</MAX_INIT_VALUE>
<OUT_PARAM_NAME_COUNT>TOKEN_COUNT</OUT_PARAM_NAME_COUNT>
<OUT_PARAM_NAME_LAST_ID>LAST_TOKEN_ID</OUT_PARAM_NAME_LAST_ID>
<OUT_PARAM_NAME_MIN>TOKEN_MIN</OUT_PARAM_NAME_MIN>
<OUT_PARAM_NAME_MAX>TOKEN_MAX</OUT_PARAM_NAME_MAX>
</Parameters>
<Parameters Type="Override">
<__MIN__>#MIN_INIT_VALUE#</__MIN__>
<__MAX__>#MAX_INIT_VALUE#</__MAX__>
</Parameters>
<ReturnParameters>
<Loop>
<Setup>
<Value>PARAM_VALUE</Value>
<Parameters>
<LoadParameters ID="#SAVED_PARAMETERS#"/>
</Parameters>
</Setup>
<Do>
<Parameters Type="Override" Lifetime="Loop">
<UseParametersFn Name="ASOBO_Increment_ID_Helper"/>
</Parameters>
<Parameters Type="Override" Lifetime="Loop">
<Condition>
<Test>
<Lower>
<Number>#PARAM_VALUE#</Number>
<Number>#__MIN__#</Number>
</Lower>
</Test>
<True>
<__MIN__>#PARAM_VALUE#</__MIN__>
</True>
</Condition>
<Condition>
<Test>
<Greater>
<Number>#PARAM_VALUE#</Number>
<Number>#__MAX__#</Number>
</Greater>
</Test>
<True>
<__MAX__>#PARAM_VALUE#</__MAX__>
</True>
</Condition>
</Parameters>
</Do>
<Then>
<#OUT_PARAM_NAME_LAST_ID#>#CUR_ID#</#OUT_PARAM_NAME_LAST_ID#>
<#OUT_PARAM_NAME_COUNT# Process="Int">#CUR_ID# 1 +</#OUT_PARAM_NAME_COUNT#>
<#OUT_PARAM_NAME_MIN#>#__MIN__#</#OUT_PARAM_NAME_MIN#>
<#OUT_PARAM_NAME_MAX#>#__MAX__#</#OUT_PARAM_NAME_MAX#>
</Then>
</Loop>
</ReturnParameters>
</ParametersFn>
<!-- IN: SAVED_PARAMETERS (name of the saved parameters to load) -->
<!-- OUT: loaded parameters with original save removed by default -->
<ParametersFn Name="ASOBO_Load_Then_Remove_Parameters_Helper">
<Parameters Type="Default">
<REMOVE_#SAVED_PARAMETERS#>True</REMOVE_#SAVED_PARAMETERS#>
</Parameters>
<Parameters Type="Override">
<__SAVED_PARAMETERS__ Process="Param">#SAVED_PARAMETERS#</__SAVED_PARAMETERS__>
</Parameters>
<ReturnParameters>
<Condition CheckSavedParameters="#__SAVED_PARAMETERS__#">
<LoadParameters ID="#__SAVED_PARAMETERS__#"/>
<Condition Valid="REMOVE_#SAVED_PARAMETERS#">
<RemoveSavedParameters ID="#__SAVED_PARAMETERS__#"/>
</Condition>
</Condition>
</ReturnParameters>
</ParametersFn>
<!-- IN: SAVED_PARAMETERS (name of the saved parameters to load) -->
<!-- IN: SAVE_TO (name of the saved parameters to load) -->
<!-- OUT: loaded parameters with original save removed by default -->
<ParametersFn Name="ASOBO_Save_To_Then_Remove_Parameters_Helper">
<Parameters Type="Default">
<REMOVE_#SAVED_PARAMETERS#>True</REMOVE_#SAVED_PARAMETERS#>
<APPEND>Override</APPEND>
</Parameters>
<Parameters Type="Override">
<__SAVED_PARAMETERS__ Process="Param">#SAVED_PARAMETERS#</__SAVED_PARAMETERS__>
</Parameters>
<ReturnParameters>
<Condition CheckSavedParameters="#__SAVED_PARAMETERS__#">
<SaveParameters ID="#SAVE_TO#" Append="#APPEND#">
<LoadParameters ID="#__SAVED_PARAMETERS__#"/>
</SaveParameters>
<Condition Valid="REMOVE_#SAVED_PARAMETERS#">
<RemoveSavedParameters ID="#__SAVED_PARAMETERS__#"/>
</Condition>
</Condition>
</ReturnParameters>
</ParametersFn>
<!-- In: MAX_VALUE (value maximum has to be positive) -->
<!-- In: MIN_VALUE (value minimum has to be negative) -->
<!-- OUT: computed ratios to 0 -->
<ParametersFn Name="ASOBO_Get_MIN_MAX_Ratios_Helper">
<Parameters Type="Override">
<FULL_RANGE Process="Float">#MAX_VALUE# #MIN_VALUE# -</FULL_RANGE>
<POSITIVE_RANGE Process="Float">#MAX_VALUE# 0 -</POSITIVE_RANGE>
<NEGATIVE_RANGE Process="Float">0 #MIN_VALUE# -</NEGATIVE_RANGE>
</Parameters>
<Parameters Type="Override">
<RATIO_POSITIVE Process="Float">#POSITIVE_RANGE# #FULL_RANGE# /</RATIO_POSITIVE>
<RATIO_NEGATIVE Process="Float">#NEGATIVE_RANGE# #FULL_RANGE# /</RATIO_NEGATIVE>
</Parameters>
<Parameters Type="Override">
<POSITIVE_TO_NEGATIVE_RATIO Process="Float">#RATIO_NEGATIVE# 0 > if{ #RATIO_POSITIVE# #RATIO_NEGATIVE# / } els{ 1 }</POSITIVE_TO_NEGATIVE_RATIO>
<NEGATIVE_TO_POSITIVE_RATIO Process="Float">#RATIO_POSITIVE# 0 > if{ #RATIO_NEGATIVE# #RATIO_POSITIVE# / } els{ 1 }</NEGATIVE_TO_POSITIVE_RATIO>
</Parameters>
<ReturnParameters>
<FULL_RANGE>#FULL_RANGE#</FULL_RANGE>
<POSITIVE_RANGE>#POSITIVE_RANGE#</POSITIVE_RANGE>
<NEGATIVE_RANGE>#NEGATIVE_RANGE#</NEGATIVE_RANGE>
<RATIO_POSITIVE>#RATIO_POSITIVE#</RATIO_POSITIVE>
<RATIO_NEGATIVE>#RATIO_NEGATIVE#</RATIO_NEGATIVE>
<POSITIVE_TO_NEGATIVE_RATIO>#POSITIVE_TO_NEGATIVE_RATIO#</POSITIVE_TO_NEGATIVE_RATIO>
<NEGATIVE_TO_POSITIVE_RATIO>#NEGATIVE_TO_POSITIVE_RATIO#</NEGATIVE_TO_POSITIVE_RATIO>
<MIN_VALUE>#MIN_VALUE#</MIN_VALUE>
<MAX_VALUE>#MAX_VALUE#</MAX_VALUE>
</ReturnParameters>
</ParametersFn>
<!-- In (opt): OUT_PARAM_ID -->
<!-- OUT: OUT_PARAM_SUFFIX -->
<ParametersFn Name="ASOBO_Get_Param_Suffix_Helper">
<Parameters Type="Default">
<OUT_PARAM_NAME>OUT_PARAM_SUFFIX</OUT_PARAM_NAME>
</Parameters>
<Parameters Type="Default">
<Condition Check="OUT_PARAM_ID">
<True>
<OUT_PARAM_SUFFIX>_#OUT_PARAM_ID#</OUT_PARAM_SUFFIX>
</True>
<False>
<OUT_PARAM_SUFFIX/>
</False>
</Condition>
</Parameters>
<ReturnParameters>
<#OUT_PARAM_NAME#>#OUT_PARAM_SUFFIX#</#OUT_PARAM_NAME#>
</ReturnParameters>
</ParametersFn>
<!-- In (opt): OUT_PARAM_ID -->
<!-- OUT: OUT_PARAM_PREFIX -->
<ParametersFn Name="ASOBO_Get_Param_Prefix_Helper">
<Parameters Type="Default">
<Condition Check="OUT_PARAM_ID">
<True>
<OUT_PARAM_PREFIX>#OUT_PARAM_ID#_</OUT_PARAM_PREFIX>
</True>
<False>
<OUT_PARAM_PREFIX/>
</False>
</Condition>
</Parameters>
<ReturnParameters>
<OUT_PARAM_PREFIX>#OUT_PARAM_PREFIX#</OUT_PARAM_PREFIX>
</ReturnParameters>
</ParametersFn>
<!-- In: Any number of PARAM_PREFIX_N or PARAM_SUFFIX_N (N being a sequentially increasing int, starting at 0) -->
<!-- OUT: A param named by the value of OUTGOING_PARAM (defaults to OUT_VALUE), which contains the maximum value of N -->
<ParametersFn Name="ASOBO_Get_Max_Param_Iteration_Helper">
<Parameters Type="Default">
<MAX_VALUE>-1</MAX_VALUE>
<PARAM_PREFIX/>
<PARAM_SUFFIX/>
<MAX_ITERATION>0</MAX_ITERATION>
<OUTGOING_PARAM>OUT_VALUE</OUTGOING_PARAM>
</Parameters>
<Parameters Type="Override">
<Loop>
<Setup>
<Param>CUR_ID</Param>
<From>1</From>
<Inc>1</Inc>
<While>
<Not>
<Arg Valid="INFINITE"/>
</Not>
</While>
</Setup>
<Do>
<SaveParameters ID="MaxParam_FoundValue">
<FOUND_VALUE>False</FOUND_VALUE>
<MAX_ITERATION>#MAX_ITERATION#</MAX_ITERATION>
</SaveParameters>
<Parameters Type="Override" Lifetime="Loop">
<Loop>
<Setup>
<Param>CUR_PARAM_ID</Param>
<From>0</From>
<Inc>1</Inc>
<While>
<Or>
<Arg NotEmpty="PARAM_PREFIX_#CUR_PARAM_ID#"/>
<Arg NotEmpty="PARAM_SUFIX_#CUR_PARAM_ID#"/>
</Or>
</While>
</Setup>
<Do>
<Parameters Type="Override" Lifetime="Iteration">
<PARAM_PREFIX Process="Param">PARAM_PREFIX_#CUR_PARAM_ID#</PARAM_PREFIX>
<PARAM_SUFIX Process="Param">PARAM_SUFIX_#CUR_PARAM_ID#</PARAM_SUFIX>
</Parameters>
<Parameters Type="Override" Lifetime="Iteration">
<PARAM_FINAL Process="Param">#PARAM_PREFIX##CUR_ID##PARAM_SUFFIX#</PARAM_FINAL>
</Parameters>
<Parameters Type="Override" Lifetime="Loop">
<Condition NotEmpty="PARAM_FINAL">
<SaveParameters ID="MaxParam_FoundValue">
<FOUND_VALUE>True</FOUND_VALUE>
<MAX_ITERATION Process="Int">#MAX_ITERATION# #CUR_ID# max</MAX_ITERATION>
</SaveParameters>
</Condition>
</Parameters>
</Do>
</Loop>
<LoadParameters ID="MaxParam_FoundValue"/>
<Condition Valid="FOUND_VALUE">
<False>
<Break/>
</False>
</Condition>
</Parameters>
</Do>
</Loop>
<LoadParameters ID="MaxParam_FoundValue"/>
</Parameters>
<ReturnParameters>
<#OUTGOING_PARAM# Process="Int">#MAX_ITERATION#</#OUTGOING_PARAM#>
</ReturnParameters>
</ParametersFn>
<ParametersFn Name="ASOBO_Get_Non_Linear_Animation_Code">
<Parameters Type="Default">
<SELECTION>50</SELECTION><!-- dynamic parameter for example gallons qty in a fuel tank -->
<!-- at least 2 points of reference to interpolate -->
<!-- ANIM_VALUE = frame for which the REF_VALUE is corresponding -->
<!-- REF_VALUE = value used as a comparison point to SELECTION -->
<ANIM_VALUE_0>0</ANIM_VALUE_0>
<REF_VALUE_0>0</REF_VALUE_0>
<ANIM_VALUE_1>100</ANIM_VALUE_1>
<REF_VALUE_1>100</REF_VALUE_1>
<!-- Add as much as necessary when calling the template -->
<!-- ######################################################### -->
<ANIM_LENGTH>100</ANIM_LENGTH><!-- number of frame in the animation -->
<MAX_POINT_INDEX>1</MAX_POINT_INDEX><!-- index of latest point of reference -->
<MAX_DISPLAYABLE>100</MAX_DISPLAYABLE><!-- higher bound the value SELECTION can reach (the maximum your gauge can display) -->
<MIN_DISPLAYABLE>0</MIN_DISPLAYABLE><!-- lower bound the value SELECTION can reach (the minimum your gauge can display) -->
<EXIT_TEMPLATE>ASOBO_GT_Anim_Code</EXIT_TEMPLATE>
<EXIT_PARAM_NAME>ANIM_CODE</EXIT_PARAM_NAME>
<CONTENT></CONTENT><!-- CONTENT init: can be used to tweak the value before interpolating -->
</Parameters>
<Parameters Type="Override">
<ANIM_VAL_PREVIOUS_POINT Process="Param">ANIM_VALUE_#MAX_POINT_INDEX#</ANIM_VAL_PREVIOUS_POINT>
<REF_VAL_PREVIOUS_POINT Process="Param">REF_VALUE_#MAX_POINT_INDEX#</REF_VAL_PREVIOUS_POINT>
<MAX_POINT_INDEX_MINUS_1 Process="Param">#MAX_POINT_INDEX# 1 -</MAX_POINT_INDEX_MINUS_1>
</Parameters>
<Parameters Type="Override">
<Loop>
<Setup>
<Param>NEXT_ID</Param>
<From>#MAX_POINT_INDEX#</From>
<Inc>-1</Dec>
<To>0</To>
</Setup>
<Do>
<Parameters Type="Override" Lifetime="Loop">
<ANIM_VAL_CURRENT_POINT Process="Param">ANIM_VALUE_#NEXT_ID#</ANIM_VAL_CURRENT_POINT>
<REF_VAL_CURRENT_POINT Process="Param">REF_VALUE_#NEXT_ID#</REF_VAL_CURRENT_POINT>
</Parameters>
<Parameters Type="Override" Lifetime="Loop">
<CONTENT>
#CONTENT#
l0 #REF_VAL_CURRENT_POINT# > if{
l0 #REF_VAL_CURRENT_POINT# - #REF_VAL_PREVIOUS_POINT# #REF_VAL_CURRENT_POINT# - / #ANIM_VAL_PREVIOUS_POINT# #ANIM_VAL_CURRENT_POINT# - * #ANIM_VAL_CURRENT_POINT# + sp1 g1
}
</CONTENT>
<ANIM_VAL_PREVIOUS_POINT Process="Param">ANIM_VALUE_#NEXT_ID#</ANIM_VAL_PREVIOUS_POINT>
<REF_VAL_PREVIOUS_POINT Process="Param">REF_VALUE_#NEXT_ID#</REF_VAL_PREVIOUS_POINT>
</Parameters>
</Do>
<Then>
<RETURN_VALUE>
#SELECTION# #MAX_DISPLAYABLE# min #MIN_DISPLAYABLE# max sp0
#CONTENT#
:1 l1
</RETURN_VALUE>
</Then>
</Loop>
</Parameters>
<ReturnParameters>
<#EXIT_PARAM_NAME#>#RETURN_VALUE#</#EXIT_PARAM_NAME#>
</ReturnParameters>
</ParametersFn>
</ModelBehaviors>
ParametersFn
ASOBO_PFN_Call_Overridable_ParametersFn_Helper
Definition from XML<ParametersFn Name="ASOBO_PFN_Call_Overridable_ParametersFn_Helper"> <Parameters Type="Default"> <#PFN_PARAM_NAME#>#PFN_PARAM_DEFAULT#</#PFN_PARAM_NAME#> </Parameters> <Parameters Type="Override"> <__FN_NAME__ Process="Param">#PFN_PARAM_NAME#</__FN_NAME__> </Parameters> <ReturnParameters> <UseParametersFn Name="#__FN_NAME__#"> <PFN_PARAM_NAME/> </UseParametersFn> </ReturnParameters> </ParametersFn>Parameters initialization:
- Default
Parameters set:
- #PFN_PARAM_NAME# (using PFN_PARAM_DEFAULT)
- Override
Parameters set:
- __FN_NAME__ (using PFN_PARAM_NAME)
Return parameters:
Parameters read:
- __FN_NAME__
ParametersFn used:
- #__FN_NAME__#
Parameters set:
- PFN_PARAM_NAME
- Default
ASOBO_PFN_Call_Overridable_ParametersFn_No_Default_Helper
Definition from XML<ParametersFn Name="ASOBO_PFN_Call_Overridable_ParametersFn_No_Default_Helper"> <Parameters Type="Override"> <__FN_NAME__ Process="Param">#PFN_PARAM_NAME#</__FN_NAME__> </Parameters> <ReturnParameters> <Condition NotEmpty="__FN_NAME__"> <UseParametersFn Name="#__FN_NAME__#"> <PFN_PARAM_NAME/> </UseParametersFn> </Condition> </ReturnParameters> </ParametersFn>Parameters initialization:
- Override
Parameters set:
- __FN_NAME__ (using PFN_PARAM_NAME)
Return parameters:
Condition: NotEmpty(__FN_NAME__)
- Case: True
Parameters read:
- __FN_NAME__
ParametersFn used:
- #__FN_NAME__#
Parameters set:
- PFN_PARAM_NAME
- Override
ASOBO_PFN_Add_ID_To_Parameter_Helper
Definition from XML<ParametersFn Name="ASOBO_PFN_Add_ID_To_Parameter_Helper"> <Parameters Type="Default"> <Switch> <Case Valid="PREFIX_ID"> <OUT_PARAM_PREFIX/> <OUT_PARAM_SUFFIX>#IN_PARAM_NAME#</OUT_PARAM_SUFFIX> </Case> <Default> <OUT_PARAM_PREFIX>#IN_PARAM_NAME#</OUT_PARAM_PREFIX> <OUT_PARAM_SUFFIX/> </Default> </Switch> <APPEND_SEPARATOR>True</APPEND_SEPARATOR> </Parameters> <Parameters Type="Default"> <Condition Valid="APPEND_SEPARATOR"> <Condition NotEmpty="OUT_PARAM_PREFIX"> <PREFIX_SEPARATOR>_</PREFIX_SEPARATOR> </Condition> <Condition NotEmpty="OUT_PARAM_SUFFIX"> <SUFFIX_SEPARATOR>_</SUFFIX_SEPARATOR> </Condition> </Condition> </Parameters> <Parameters Type="Default"> <PREFIX_SEPARATOR/> <SUFFIX_SEPARATOR/> </Parameters> <Parameters Type="Override"> <__PARAM_VALUE__ Process="Param">#IN_PARAM_NAME#</__PARAM_VALUE__> <__PARAM_ID__>#IN_PARAM_ID#</__PARAM_ID__> </Parameters> <Parameters Type="Override"> <__PARAM_ID__>#PREFIX_SEPARATOR##__PARAM_ID__##SUFFIX_SEPARATOR#</__PARAM_ID__> </Parameters> <Parameters Type="Override"> <__PARAM_NAME__>#OUT_PARAM_PREFIX##__PARAM_ID__##OUT_PARAM_SUFFIX#</__PARAM_NAME__> </Parameters> <ReturnParameters> <#__PARAM_NAME__#>#__PARAM_VALUE__#</#__PARAM_NAME__#> </ReturnParameters> </ParametersFn>Parameters initialization:
- Default
Parameters set:
- APPEND_SEPARATOR
Condition: Switch
- Case: Valid(PREFIX_ID)
Parameters set:
- OUT_PARAM_PREFIX
- OUT_PARAM_SUFFIX (using IN_PARAM_NAME)
- Default case:
Parameters set:
- OUT_PARAM_PREFIX (using IN_PARAM_NAME)
- OUT_PARAM_SUFFIX
- Default
Condition: Valid(APPEND_SEPARATOR)
- Case: True
Condition: NotEmpty(OUT_PARAM_PREFIX)
- Case: True
Parameters set:
- PREFIX_SEPARATOR
Condition: NotEmpty(OUT_PARAM_SUFFIX)
- Case: True
Parameters set:
- SUFFIX_SEPARATOR
- Default
Parameters set:
- PREFIX_SEPARATOR
- SUFFIX_SEPARATOR
- Override
Parameters set:
- __PARAM_VALUE__ (using IN_PARAM_NAME)
- __PARAM_ID__ (using IN_PARAM_ID)
- Override
Parameters set:
- __PARAM_ID__ (using PREFIX_SEPARATOR, __PARAM_ID__, SUFFIX_SEPARATOR)
- Override
Parameters set:
- __PARAM_NAME__ (using OUT_PARAM_PREFIX, __PARAM_ID__, OUT_PARAM_SUFFIX)
Return parameters:
Parameters set:
- #__PARAM_NAME__# (using __PARAM_VALUE__)
- Default
ASOBO_PFN_Add_ID_To_Parameters_Helper
Definition from XML<ParametersFn Name="ASOBO_PFN_Add_ID_To_Parameters_Helper"> <Parameters Type="Default"> <ELTS_COUNT>512</ELTS_COUNT> <FIRST_ID>0</FIRST_ID> </Parameters> <ReturnParameters> <Loop> <Setup> <Param>CUR_ID</Param> <From>#FIRST_ID#</From> <Inc>1</Inc> <To>#ELTS_COUNT#</To> <While> <Arg Check="IN_PARAM_#CUR_ID#_NAME"/> </While> </Setup> <Do> <UseParametersFn Name="ASOBO_PFN_Add_ID_To_Parameter_Helper"> <IN_PARAM_NAME Process="Param">IN_PARAM_#CUR_ID#_NAME</IN_PARAM_NAME> <Condition Check="IN_PARAM_#CUR_ID#_ID"> <IN_PARAM_ID Process="Param">IN_PARAM_#CUR_ID#_ID</IN_PARAM_ID> </Condition> <Condition Check="OUT_PARAM_#CUR_ID#_PREFIX"> <OUT_PARAM_PREFIX Process="Param">OUT_PARAM_#CUR_ID#_PREFIX</OUT_PARAM_PREFIX> </Condition> <Condition Check="OUT_PARAM_#CUR_ID#_SUFFIX"> <OUT_PARAM_SUFFIX Process="Param">OUT_PARAM_#CUR_ID#_SUFFIX</OUT_PARAM_SUFFIX> </Condition> <Condition Check="OUT_PARAM_#CUR_ID#_PREFIX_SEPARATOR"> <PREFIX_SEPARATOR Process="Param">OUT_PARAM_#CUR_ID#_PREFIX_SEPARATOR</PREFIX_SEPARATOR> </Condition> <Condition Check="OUT_PARAM_#CUR_ID#_SUFFIX_SEPARATOR"> <SUFFIX_SEPARATOR Process="Param">OUT_PARAM_#CUR_ID#_SUFFIX_SEPARATOR</SUFFIX_SEPARATOR> </Condition> </UseParametersFn> </Do> </Loop> </ReturnParameters> </ParametersFn>Parameters initialization:
- Default
Parameters set:
- ELTS_COUNT
- FIRST_ID
Return parameters:
Parameters read:
- FIRST_ID
- ELTS_COUNT
- IN_PARAM_#CUR_ID#_NAME
Parameters set:
- CUR_ID
ParametersFn used:
- ASOBO_PFN_Add_ID_To_Parameter_Helper
Parameters set:
- IN_PARAM_NAME (using CUR_ID)
Condition: Check(IN_PARAM_#CUR_ID#_ID)
- Case: True
Parameters set:
- IN_PARAM_ID (using CUR_ID)
Condition: Check(OUT_PARAM_#CUR_ID#_PREFIX)
- Case: True
Parameters set:
- OUT_PARAM_PREFIX (using CUR_ID)
Condition: Check(OUT_PARAM_#CUR_ID#_SUFFIX)
- Case: True
Parameters set:
- OUT_PARAM_SUFFIX (using CUR_ID)
Condition: Check(OUT_PARAM_#CUR_ID#_PREFIX_SEPARATOR)
- Case: True
Parameters set:
- PREFIX_SEPARATOR (using CUR_ID)
Condition: Check(OUT_PARAM_#CUR_ID#_SUFFIX_SEPARATOR)
- Case: True
Parameters set:
- SUFFIX_SEPARATOR (using CUR_ID)
- Default
ASOBO_PFN_Remove_ID_From_Parameter_Helper
Definition from XML<ParametersFn Name="ASOBO_PFN_Remove_ID_From_Parameter_Helper"> <Parameters Type="Default"> <OUT_PARAM_NAME>#IN_PARAM_NAME#</OUT_PARAM_NAME> </Parameters> <ReturnParameters> <Switch> <Case Valid="PREFIXED_ID"> <Condition Check="#IN_PARAM_ID#_#IN_PARAM_NAME#"> <#OUT_PARAM_NAME# Process="Param">#IN_PARAM_ID#_#IN_PARAM_NAME#</#OUT_PARAM_NAME#> </Condition> </Case> <Default> <Condition Check="#IN_PARAM_NAME#_#IN_PARAM_ID#"> <#OUT_PARAM_NAME# Process="Param">#IN_PARAM_NAME#_#IN_PARAM_ID#</#OUT_PARAM_NAME#> </Condition> </Default> </Switch> </ReturnParameters> </ParametersFn>Parameters initialization:
- Default
Parameters set:
- OUT_PARAM_NAME (using IN_PARAM_NAME)
Return parameters:
Condition: Switch
- Case: Valid(PREFIXED_ID)
Condition: Check(#IN_PARAM_ID#_#IN_PARAM_NAME#)
- Case: True
Parameters set:
- #OUT_PARAM_NAME# (using IN_PARAM_ID, IN_PARAM_NAME)
- Default case:
Condition: Check(#IN_PARAM_NAME#_#IN_PARAM_ID#)
- Case: True
Parameters set:
- #OUT_PARAM_NAME# (using IN_PARAM_NAME, IN_PARAM_ID)
- Default
ASOBO_PFN_Remove_ID_From_Parameters_Helper
Definition from XML<ParametersFn Name="ASOBO_PFN_Remove_ID_From_Parameters_Helper"> <Parameters Type="Default"> <ELTS_COUNT>512</ELTS_COUNT> <FIRST_ID>0</FIRST_ID> </Parameters> <ReturnParameters> <Loop> <Setup> <Param>CUR_ID</Param> <From>#FIRST_ID#</From> <To>#ELTS_COUNT#</To> <Inc>1</Inc> <While> <Arg NotEmpty="IN_PARAM_#CUR_ID#_NAME"/> </While> </Setup> <Do> <UseParametersFn Name="ASOBO_PFN_Remove_ID_From_Parameter_Helper"> <IN_PARAM_NAME Process="Param">IN_PARAM_#CUR_ID#_NAME</IN_PARAM_NAME> <Condition Check="IN_PARAM_#CUR_ID#_ID"> <IN_PARAM_ID Process="Param">IN_PARAM_#CUR_ID#_ID</IN_PARAM_ID> </Condition> </UseParametersFn> </Do> </Loop> </ReturnParameters> </ParametersFn>Parameters initialization:
- Default
Parameters set:
- ELTS_COUNT
- FIRST_ID
Return parameters:
Parameters read:
- FIRST_ID
- ELTS_COUNT
- CUR_ID
Parameters set:
- CUR_ID
ParametersFn used:
- ASOBO_PFN_Remove_ID_From_Parameter_Helper
Parameters set:
- IN_PARAM_NAME (using CUR_ID)
Condition: Check(IN_PARAM_#CUR_ID#_ID)
- Case: True
Parameters set:
- IN_PARAM_ID (using CUR_ID)
- Default
ASOBO_PFN_Return_Parameter_No_Transform_Helper
Definition from XML<ParametersFn Name="ASOBO_PFN_Return_Parameter_No_Transform_Helper"> <Parameters Type="Default"> <OUT_PARAM_NAME>#IN_PARAM_NAME#</OUT_PARAM_NAME> </Parameters> <ReturnParameters> <#OUT_PARAM_NAME# Process="Param">#IN_PARAM_NAME#</#OUT_PARAM_NAME#> </ReturnParameters> </ParametersFn>Parameters initialization:
- Default
Parameters set:
- OUT_PARAM_NAME (using IN_PARAM_NAME)
Return parameters:
Parameters set:
- #OUT_PARAM_NAME# (using IN_PARAM_NAME)
- Default
ASOBO_PFN_Return_Parameters_No_Transform_Helper
Definition from XML<ParametersFn Name="ASOBO_PFN_Return_Parameters_No_Transform_Helper"> <ReturnParameters> <Loop> <Setup> <Param>CUR_ID</Param> <From>0</From> <Inc>1</Inc> <While> <Arg Check="IN_PARAM_NAME_#CUR_ID#"/> </While> </Setup> <Do> <UseParametersFn Name="ASOBO_PFN_Return_Parameter_No_Transform_Helper"> <IN_PARAM_NAME Process="Param">IN_PARAM_NAME_#CUR_ID#</IN_PARAM_NAME> </UseParametersFn> </Do> </Loop> </ReturnParameters> </ParametersFn>Return parameters:
Parameters read:
- IN_PARAM_NAME_#CUR_ID#
Parameters set:
- CUR_ID
ParametersFn used:
- ASOBO_PFN_Return_Parameter_No_Transform_Helper
Parameters set:
- IN_PARAM_NAME (using CUR_ID)
ASOBO_Indexer_Helper
Definition from XML<ParametersFn Name="ASOBO_Indexer_Helper"> <Parameters Type="Default"> <OUT_PARAM_VALUE_PREFIX>_</OUT_PARAM_VALUE_PREFIX> <OUT_PARAM_VALUE_SUFFIX/> </Parameters> <Parameters Type="Override"> <__PARAM_VALUE__ Process="Param">#IN_PARAM_NAME_ID#</__PARAM_VALUE__> </Parameters> <Parameters Type="Default"> <OUT_PARAM_NAME>SUFFIX_#IN_PARAM_NAME_ID#</OUT_PARAM_NAME> </Parameters> <ReturnParameters> <#OUT_PARAM_NAME#>#OUT_PARAM_VALUE_PREFIX##__PARAM_VALUE__##OUT_PARAM_VALUE_SUFFIX#</#OUT_PARAM_NAME#> <#IN_PARAM_NAME_ID# Process="Param">#IN_PARAM_NAME_ID#</#IN_PARAM_NAME_ID#> </ReturnParameters> </ParametersFn>Parameters initialization:
- Default
Parameters set:
- OUT_PARAM_VALUE_PREFIX
- OUT_PARAM_VALUE_SUFFIX
- Override
Parameters set:
- __PARAM_VALUE__ (using IN_PARAM_NAME_ID)
- Default
Parameters set:
- OUT_PARAM_NAME (using IN_PARAM_NAME_ID)
Return parameters:
Parameters set:
- #OUT_PARAM_NAME# (using OUT_PARAM_VALUE_PREFIX, __PARAM_VALUE__, OUT_PARAM_VALUE_SUFFIX)
- #IN_PARAM_NAME_ID# (using IN_PARAM_NAME_ID)
- Default
ASOBO_For_Each_Of_PFN_Helper
Definition from XML<ParametersFn Name="ASOBO_For_Each_Of_PFN_Helper"> <Parameters Type="Default"> <OUT_PARAM_NAME>PARAM_NAME</OUT_PARAM_NAME> <OUT_PARAM_VALUE>PARAM_VALUE</OUT_PARAM_VALUE> <OUT_PARAM_ID>PARAM_ID</OUT_PARAM_ID> </Parameters> <ReturnParameters> <Loop> <Setup> <Param>PARAM</Param> <Value>VALUE</Value> <Parameters> <UseParametersFn Name="#PFN_GET_PARAMETERS#"/> </Parameters> </Setup> <Do> <Parameters Type="Override" Lifetime="Loop"> <UseParametersFn Name="ASOBO_Increment_ID_Helper"/> </Parameters> <UseParametersFn Name="#PFN_TO_CALL#"> <#OUT_PARAM_NAME#>#PARAM#</#OUT_PARAM_NAME#> <#OUT_PARAM_ID#>#CUR_ID#</#OUT_PARAM_ID#> <#OUT_PARAM_VALUE#>#VALUE#</#OUT_PARAM_VALUE#> </UseParametersFn> </Do> </Loop> </ReturnParameters> </ParametersFn>Parameters initialization:
- Default
Parameters set:
- OUT_PARAM_NAME
- OUT_PARAM_VALUE
- OUT_PARAM_ID
Return parameters:
Parameters read:
- VALUE
- PFN_GET_PARAMETERS
- PFN_TO_CALL
Parameters set:
- PARAM
ParametersFn used:
- #PFN_GET_PARAMETERS#
- ASOBO_Increment_ID_Helper
- #PFN_TO_CALL#
Parameters set:
- #OUT_PARAM_NAME# (using PARAM)
- #OUT_PARAM_ID# (using CUR_ID)
- #OUT_PARAM_VALUE# (using VALUE)
- Default
ASOBO_Increment_ID_Helper
Definition from XML<ParametersFn Name="ASOBO_Increment_ID_Helper"> <Parameters Type="Default"> <OUT_PARAM_ID_NAME>CUR_ID</OUT_PARAM_ID_NAME> <OUT_FIRST_ID>0</OUT_FIRST_ID> <INCREMENT_COUNT>1</INCREMENT_COUNT> </Parameters> <Parameters Type="Override"> <Condition Check="#OUT_PARAM_ID_NAME#"> <CUR_VALUE Process="Param">#OUT_PARAM_ID_NAME#</CUR_VALUE> </Condition> </Parameters> <ReturnParameters> <Condition Check="#OUT_PARAM_ID_NAME#"> <True> <#OUT_PARAM_ID_NAME# Process="Int">#CUR_VALUE# #INCREMENT_COUNT# +</#OUT_PARAM_ID_NAME#> </True> <False> <#OUT_PARAM_ID_NAME#>#OUT_FIRST_ID#</#OUT_PARAM_ID_NAME#> </False> </Condition> </ReturnParameters> </ParametersFn>Parameters initialization:
- Default
Parameters set:
- OUT_PARAM_ID_NAME
- OUT_FIRST_ID
- INCREMENT_COUNT
- Override
Condition: Check(#OUT_PARAM_ID_NAME#)
- Case: True
Parameters set:
- CUR_VALUE (using OUT_PARAM_ID_NAME)
Return parameters:
Condition: Check(#OUT_PARAM_ID_NAME#)
- Case: True
Parameters set:
- #OUT_PARAM_ID_NAME# (using CUR_VALUE, INCREMENT_COUNT)
- Case: False
Parameters set:
- #OUT_PARAM_ID_NAME# (using OUT_FIRST_ID)
- Default
ASOBO_Count_Token_Helper
Definition from XML<ParametersFn Name="ASOBO_Count_Token_Helper"> <Parameters Type="Default"> <FROM>0</FROM> <INC>1</INC> <TOKEN_PREFIX/> <TOKEN_SUFFIX/> <OUT_PARAM_NAME_COUNT>TOKEN_COUNT</OUT_PARAM_NAME_COUNT> <OUT_PARAM_NAME_LAST_ID>LAST_TOKEN_ID</OUT_PARAM_NAME_LAST_ID> </Parameters> <ReturnParameters> <Loop> <Setup> <Param>CUR_ID</Param> <From>#FROM#</From> <Inc>#INC#</Inc> <While> <Arg NotEmpty="#TOKEN_PREFIX##CUR_ID##TOKEN_SUFFIX#"/> </While> </Setup> <Do/> <Then> <#OUT_PARAM_NAME_COUNT# Process="Int">#CUR_ID# #FROM# -</#OUT_PARAM_NAME_COUNT#> <#OUT_PARAM_NAME_LAST_ID# Process="Int">#CUR_ID# 1 -</#OUT_PARAM_NAME_LAST_ID#> </Then> </Loop> </ReturnParameters> </ParametersFn>Parameters initialization:
- Default
Parameters set:
- FROM
- INC
- TOKEN_PREFIX
- TOKEN_SUFFIX
- OUT_PARAM_NAME_COUNT
- OUT_PARAM_NAME_LAST_ID
Return parameters:
Parameters read:
- FROM
- INC
- TOKEN_PREFIX
- CUR_ID
- TOKEN_SUFFIX
Parameters set:
- CUR_ID
- #OUT_PARAM_NAME_COUNT# (using CUR_ID, FROM)
- #OUT_PARAM_NAME_LAST_ID# (using CUR_ID)
- Default
ASOBO_Count_Token_In_Save_Helper
Definition from XML<ParametersFn Name="ASOBO_Count_Token_In_Save_Helper"> <Parameters Type="Default"> <FROM>0</FROM> <INC>1</INC> <TOKEN_PREFIX/> <TOKEN_SUFFIX/> <OUT_PARAM_NAME_COUNT>TOKEN_COUNT</OUT_PARAM_NAME_COUNT> <OUT_PARAM_NAME_LAST_ID>LAST_TOKEN_ID</OUT_PARAM_NAME_LAST_ID> </Parameters> <Parameters Type="Override"> <LoadParameters ID="#TOKEN_COLLECTION#"/> </Parameters> <ReturnParameters> <Loop> <Setup> <Param>CUR_ID</Param> <From>#FROM#</From> <Inc>#INC#</Inc> <While> <Arg NotEmpty="#TOKEN_PREFIX##CUR_ID##TOKEN_SUFFIX#"/> </While> </Setup> <Do/> <Then> <#OUT_PARAM_NAME_COUNT# Process="Int">#CUR_ID# #FROM# -</#OUT_PARAM_NAME_COUNT#> <#OUT_PARAM_NAME_LAST_ID# Process="Int">#CUR_ID# 1 -</#OUT_PARAM_NAME_LAST_ID#> </Then> </Loop> </ReturnParameters> </ParametersFn>Parameters initialization:
- Default
Parameters set:
- FROM
- INC
- TOKEN_PREFIX
- TOKEN_SUFFIX
- OUT_PARAM_NAME_COUNT
- OUT_PARAM_NAME_LAST_ID
- Override
Parameters read:
- TOKEN_COLLECTION
Return parameters:
Parameters read:
- FROM
- INC
- TOKEN_PREFIX
- CUR_ID
- TOKEN_SUFFIX
Parameters set:
- CUR_ID
- #OUT_PARAM_NAME_COUNT# (using CUR_ID, FROM)
- #OUT_PARAM_NAME_LAST_ID# (using CUR_ID)
- Default
ASOBO_Find_Min_Max_Helper
Definition from XML<ParametersFn Name="ASOBO_Find_Min_Max_Helper"> <Parameters Type="Default"> <MIN_INIT_VALUE>1000000</MIN_INIT_VALUE> <MAX_INIT_VALUE>-1000000</MAX_INIT_VALUE> <FROM>0</FROM> <INC>1</INC> <TOKEN_PREFIX/> <TOKEN_SUFFIX/> <OUT_PARAM_NAME_COUNT>TOKEN_COUNT</OUT_PARAM_NAME_COUNT> <OUT_PARAM_NAME_LAST_ID>LAST_TOKEN_ID</OUT_PARAM_NAME_LAST_ID> <OUT_PARAM_NAME_MIN>TOKEN_MIN</OUT_PARAM_NAME_MIN> <OUT_PARAM_NAME_MAX>TOKEN_MAX</OUT_PARAM_NAME_MAX> </Parameters> <Parameters Type="Override"> <__MIN__>#MIN_INIT_VALUE#</__MIN__> <__MAX__>#MAX_INIT_VALUE#</__MAX__> </Parameters> <ReturnParameters> <Loop> <Setup> <Param>CUR_ID</Param> <From>#FROM#</From> <Inc>#INC#</Inc> <While> <Arg Check="#TOKEN_PREFIX##CUR_ID##TOKEN_SUFFIX#"/> </While> </Setup> <Do> <Parameters Type="Override"> <PARAM_VALUE Process="Param">#TOKEN_PREFIX##CUR_ID##TOKEN_SUFFIX#</PARAM_VALUE> </Parameters> <Parameters Type="Override" Lifetime="Loop"> <Condition> <Test> <Lower> <Number>#PARAM_VALUE#</Number> <Number>#__MIN__#</Number> </Lower> </Test> <True> <__MIN__>#PARAM_VALUE#</__MIN__> </True> </Condition> <Condition> <Test> <Greater> <Number>#PARAM_VALUE#</Number> <Number>#__MAX__#</Number> </Greater> </Test> <True> <__MAX__>#PARAM_VALUE#</__MAX__> </True> </Condition> </Parameters> </Do> <Then> <#OUT_PARAM_NAME_LAST_ID# Process="Int">#CUR_ID# 1 -</#OUT_PARAM_NAME_LAST_ID#> <#OUT_PARAM_NAME_COUNT#>#CUR_ID#</#OUT_PARAM_NAME_COUNT#> <#OUT_PARAM_NAME_MIN#>#__MIN__#</#OUT_PARAM_NAME_MIN#> <#OUT_PARAM_NAME_MAX#>#__MAX__#</#OUT_PARAM_NAME_MAX#> </Then> </Loop> </ReturnParameters> </ParametersFn>Parameters initialization:
- Default
Parameters set:
- MIN_INIT_VALUE
- MAX_INIT_VALUE
- FROM
- INC
- TOKEN_PREFIX
- TOKEN_SUFFIX
- OUT_PARAM_NAME_COUNT
- OUT_PARAM_NAME_LAST_ID
- OUT_PARAM_NAME_MIN
- OUT_PARAM_NAME_MAX
- Override
Parameters set:
- __MIN__ (using MIN_INIT_VALUE)
- __MAX__ (using MAX_INIT_VALUE)
Return parameters:
Parameters read:
- FROM
- INC
- #TOKEN_PREFIX##CUR_ID##TOKEN_SUFFIX#
Parameters set:
- CUR_ID
- PARAM_VALUE (using TOKEN_PREFIX, CUR_ID, TOKEN_SUFFIX)
- #OUT_PARAM_NAME_LAST_ID# (using CUR_ID)
- #OUT_PARAM_NAME_COUNT# (using CUR_ID)
- #OUT_PARAM_NAME_MIN# (using __MIN__)
- #OUT_PARAM_NAME_MAX# (using __MAX__)
Condition: Test
- Case: True
Parameters set:
- __MIN__ (using PARAM_VALUE)
Condition: Test
- Case: True
Parameters set:
- __MAX__ (using PARAM_VALUE)
- Default
ASOBO_Find_Min_Max_Helper_In
Definition from XML<ParametersFn Name="ASOBO_Find_Min_Max_Helper_In"> <Parameters Type="Default"> <MIN_INIT_VALUE>1000000</MIN_INIT_VALUE> <MAX_INIT_VALUE>-1000000</MAX_INIT_VALUE> <OUT_PARAM_NAME_COUNT>TOKEN_COUNT</OUT_PARAM_NAME_COUNT> <OUT_PARAM_NAME_LAST_ID>LAST_TOKEN_ID</OUT_PARAM_NAME_LAST_ID> <OUT_PARAM_NAME_MIN>TOKEN_MIN</OUT_PARAM_NAME_MIN> <OUT_PARAM_NAME_MAX>TOKEN_MAX</OUT_PARAM_NAME_MAX> </Parameters> <Parameters Type="Override"> <__MIN__>#MIN_INIT_VALUE#</__MIN__> <__MAX__>#MAX_INIT_VALUE#</__MAX__> </Parameters> <ReturnParameters> <Loop> <Setup> <Value>PARAM_VALUE</Value> <Parameters> <LoadParameters ID="#SAVED_PARAMETERS#"/> </Parameters> </Setup> <Do> <Parameters Type="Override" Lifetime="Loop"> <UseParametersFn Name="ASOBO_Increment_ID_Helper"/> </Parameters> <Parameters Type="Override" Lifetime="Loop"> <Condition> <Test> <Lower> <Number>#PARAM_VALUE#</Number> <Number>#__MIN__#</Number> </Lower> </Test> <True> <__MIN__>#PARAM_VALUE#</__MIN__> </True> </Condition> <Condition> <Test> <Greater> <Number>#PARAM_VALUE#</Number> <Number>#__MAX__#</Number> </Greater> </Test> <True> <__MAX__>#PARAM_VALUE#</__MAX__> </True> </Condition> </Parameters> </Do> <Then> <#OUT_PARAM_NAME_LAST_ID#>#CUR_ID#</#OUT_PARAM_NAME_LAST_ID#> <#OUT_PARAM_NAME_COUNT# Process="Int">#CUR_ID# 1 +</#OUT_PARAM_NAME_COUNT#> <#OUT_PARAM_NAME_MIN#>#__MIN__#</#OUT_PARAM_NAME_MIN#> <#OUT_PARAM_NAME_MAX#>#__MAX__#</#OUT_PARAM_NAME_MAX#> </Then> </Loop> </ReturnParameters> </ParametersFn>Parameters initialization:
- Default
Parameters set:
- MIN_INIT_VALUE
- MAX_INIT_VALUE
- OUT_PARAM_NAME_COUNT
- OUT_PARAM_NAME_LAST_ID
- OUT_PARAM_NAME_MIN
- OUT_PARAM_NAME_MAX
- Override
Parameters set:
- __MIN__ (using MIN_INIT_VALUE)
- __MAX__ (using MAX_INIT_VALUE)
Return parameters:
Parameters read:
- PARAM_VALUE
- SAVED_PARAMETERS
Parameters set:
- #OUT_PARAM_NAME_LAST_ID# (using CUR_ID)
- #OUT_PARAM_NAME_COUNT# (using CUR_ID)
- #OUT_PARAM_NAME_MIN# (using __MIN__)
- #OUT_PARAM_NAME_MAX# (using __MAX__)
ParametersFn used:
Condition: Test
- Case: True
Parameters set:
- __MIN__ (using PARAM_VALUE)
Condition: Test
- Case: True
Parameters set:
- __MAX__ (using PARAM_VALUE)
- Default
ASOBO_Load_Then_Remove_Parameters_Helper
Definition from XML<ParametersFn Name="ASOBO_Load_Then_Remove_Parameters_Helper"> <Parameters Type="Default"> <REMOVE_#SAVED_PARAMETERS#>True</REMOVE_#SAVED_PARAMETERS#> </Parameters> <Parameters Type="Override"> <__SAVED_PARAMETERS__ Process="Param">#SAVED_PARAMETERS#</__SAVED_PARAMETERS__> </Parameters> <ReturnParameters> <Condition CheckSavedParameters="#__SAVED_PARAMETERS__#"> <LoadParameters ID="#__SAVED_PARAMETERS__#"/> <Condition Valid="REMOVE_#SAVED_PARAMETERS#"> <RemoveSavedParameters ID="#__SAVED_PARAMETERS__#"/> </Condition> </Condition> </ReturnParameters> </ParametersFn>Parameters initialization:
- Default
Parameters set:
- REMOVE_#SAVED_PARAMETERS#
- Override
Parameters set:
- __SAVED_PARAMETERS__ (using SAVED_PARAMETERS)
Return parameters:
Condition: CheckSavedParameters(#__SAVED_PARAMETERS__#)
- Case: True
Parameters read:
- __SAVED_PARAMETERS__
Condition: Valid(REMOVE_#SAVED_PARAMETERS#)
- Case: True
Parameters read:
- __SAVED_PARAMETERS__
- Default
ASOBO_Save_To_Then_Remove_Parameters_Helper
Definition from XML<ParametersFn Name="ASOBO_Save_To_Then_Remove_Parameters_Helper"> <Parameters Type="Default"> <REMOVE_#SAVED_PARAMETERS#>True</REMOVE_#SAVED_PARAMETERS#> <APPEND>Override</APPEND> </Parameters> <Parameters Type="Override"> <__SAVED_PARAMETERS__ Process="Param">#SAVED_PARAMETERS#</__SAVED_PARAMETERS__> </Parameters> <ReturnParameters> <Condition CheckSavedParameters="#__SAVED_PARAMETERS__#"> <SaveParameters ID="#SAVE_TO#" Append="#APPEND#"> <LoadParameters ID="#__SAVED_PARAMETERS__#"/> </SaveParameters> <Condition Valid="REMOVE_#SAVED_PARAMETERS#"> <RemoveSavedParameters ID="#__SAVED_PARAMETERS__#"/> </Condition> </Condition> </ReturnParameters> </ParametersFn>Parameters initialization:
- Default
Parameters set:
- REMOVE_#SAVED_PARAMETERS#
- APPEND
- Override
Parameters set:
- __SAVED_PARAMETERS__ (using SAVED_PARAMETERS)
Return parameters:
Condition: CheckSavedParameters(#__SAVED_PARAMETERS__#)
- Case: True
Parameters read:
- SAVE_TO
- APPEND
- __SAVED_PARAMETERS__
Condition: Valid(REMOVE_#SAVED_PARAMETERS#)
- Case: True
Parameters read:
- __SAVED_PARAMETERS__
- Default
ASOBO_Get_MIN_MAX_Ratios_Helper
Definition from XML<ParametersFn Name="ASOBO_Get_MIN_MAX_Ratios_Helper"> <Parameters Type="Override"> <FULL_RANGE Process="Float">#MAX_VALUE# #MIN_VALUE# -</FULL_RANGE> <POSITIVE_RANGE Process="Float">#MAX_VALUE# 0 -</POSITIVE_RANGE> <NEGATIVE_RANGE Process="Float">0 #MIN_VALUE# -</NEGATIVE_RANGE> </Parameters> <Parameters Type="Override"> <RATIO_POSITIVE Process="Float">#POSITIVE_RANGE# #FULL_RANGE# /</RATIO_POSITIVE> <RATIO_NEGATIVE Process="Float">#NEGATIVE_RANGE# #FULL_RANGE# /</RATIO_NEGATIVE> </Parameters> <Parameters Type="Override"> <POSITIVE_TO_NEGATIVE_RATIO Process="Float">#RATIO_NEGATIVE# 0 > if{ #RATIO_POSITIVE# #RATIO_NEGATIVE# / } els{ 1 }</POSITIVE_TO_NEGATIVE_RATIO> <NEGATIVE_TO_POSITIVE_RATIO Process="Float">#RATIO_POSITIVE# 0 > if{ #RATIO_NEGATIVE# #RATIO_POSITIVE# / } els{ 1 }</NEGATIVE_TO_POSITIVE_RATIO> </Parameters> <ReturnParameters> <FULL_RANGE>#FULL_RANGE#</FULL_RANGE> <POSITIVE_RANGE>#POSITIVE_RANGE#</POSITIVE_RANGE> <NEGATIVE_RANGE>#NEGATIVE_RANGE#</NEGATIVE_RANGE> <RATIO_POSITIVE>#RATIO_POSITIVE#</RATIO_POSITIVE> <RATIO_NEGATIVE>#RATIO_NEGATIVE#</RATIO_NEGATIVE> <POSITIVE_TO_NEGATIVE_RATIO>#POSITIVE_TO_NEGATIVE_RATIO#</POSITIVE_TO_NEGATIVE_RATIO> <NEGATIVE_TO_POSITIVE_RATIO>#NEGATIVE_TO_POSITIVE_RATIO#</NEGATIVE_TO_POSITIVE_RATIO> <MIN_VALUE>#MIN_VALUE#</MIN_VALUE> <MAX_VALUE>#MAX_VALUE#</MAX_VALUE> </ReturnParameters> </ParametersFn>Parameters initialization:
- Override
Parameters set:
- FULL_RANGE (using MAX_VALUE, MIN_VALUE)
- POSITIVE_RANGE (using MAX_VALUE)
- NEGATIVE_RANGE (using MIN_VALUE)
- Override
Parameters set:
- RATIO_POSITIVE (using POSITIVE_RANGE, FULL_RANGE)
- RATIO_NEGATIVE (using NEGATIVE_RANGE, FULL_RANGE)
- Override
Parameters set:
- POSITIVE_TO_NEGATIVE_RATIO (using RATIO_NEGATIVE, RATIO_POSITIVE)
- NEGATIVE_TO_POSITIVE_RATIO (using RATIO_POSITIVE, RATIO_NEGATIVE)
Return parameters:
Parameters set:
- FULL_RANGE (using FULL_RANGE)
- POSITIVE_RANGE (using POSITIVE_RANGE)
- NEGATIVE_RANGE (using NEGATIVE_RANGE)
- RATIO_POSITIVE (using RATIO_POSITIVE)
- RATIO_NEGATIVE (using RATIO_NEGATIVE)
- POSITIVE_TO_NEGATIVE_RATIO (using POSITIVE_TO_NEGATIVE_RATIO)
- NEGATIVE_TO_POSITIVE_RATIO (using NEGATIVE_TO_POSITIVE_RATIO)
- MIN_VALUE (using MIN_VALUE)
- MAX_VALUE (using MAX_VALUE)
- Override
ASOBO_Get_Param_Suffix_Helper
Definition from XML<ParametersFn Name="ASOBO_Get_Param_Suffix_Helper"> <Parameters Type="Default"> <OUT_PARAM_NAME>OUT_PARAM_SUFFIX</OUT_PARAM_NAME> </Parameters> <Parameters Type="Default"> <Condition Check="OUT_PARAM_ID"> <True> <OUT_PARAM_SUFFIX>_#OUT_PARAM_ID#</OUT_PARAM_SUFFIX> </True> <False> <OUT_PARAM_SUFFIX/> </False> </Condition> </Parameters> <ReturnParameters> <#OUT_PARAM_NAME#>#OUT_PARAM_SUFFIX#</#OUT_PARAM_NAME#> </ReturnParameters> </ParametersFn>Parameters initialization:
- Default
Parameters set:
- OUT_PARAM_NAME
- Default
Condition: Check(OUT_PARAM_ID)
- Case: True
Parameters set:
- OUT_PARAM_SUFFIX (using OUT_PARAM_ID)
- Case: False
Parameters set:
- OUT_PARAM_SUFFIX
Return parameters:
Parameters set:
- #OUT_PARAM_NAME# (using OUT_PARAM_SUFFIX)
- Default
ASOBO_Get_Param_Prefix_Helper
Definition from XML<ParametersFn Name="ASOBO_Get_Param_Prefix_Helper"> <Parameters Type="Default"> <Condition Check="OUT_PARAM_ID"> <True> <OUT_PARAM_PREFIX>#OUT_PARAM_ID#_</OUT_PARAM_PREFIX> </True> <False> <OUT_PARAM_PREFIX/> </False> </Condition> </Parameters> <ReturnParameters> <OUT_PARAM_PREFIX>#OUT_PARAM_PREFIX#</OUT_PARAM_PREFIX> </ReturnParameters> </ParametersFn>Parameters initialization:
- Default
Condition: Check(OUT_PARAM_ID)
- Case: True
Parameters set:
- OUT_PARAM_PREFIX (using OUT_PARAM_ID)
- Case: False
Parameters set:
- OUT_PARAM_PREFIX
Return parameters:
Parameters set:
- OUT_PARAM_PREFIX (using OUT_PARAM_PREFIX)
- Default
ASOBO_Get_Max_Param_Iteration_Helper
Definition from XML<ParametersFn Name="ASOBO_Get_Max_Param_Iteration_Helper"> <Parameters Type="Default"> <MAX_VALUE>-1</MAX_VALUE> <PARAM_PREFIX/> <PARAM_SUFFIX/> <MAX_ITERATION>0</MAX_ITERATION> <OUTGOING_PARAM>OUT_VALUE</OUTGOING_PARAM> </Parameters> <Parameters Type="Override"> <Loop> <Setup> <Param>CUR_ID</Param> <From>1</From> <Inc>1</Inc> <While> <Not> <Arg Valid="INFINITE"/> </Not> </While> </Setup> <Do> <SaveParameters ID="MaxParam_FoundValue"> <FOUND_VALUE>False</FOUND_VALUE> <MAX_ITERATION>#MAX_ITERATION#</MAX_ITERATION> </SaveParameters> <Parameters Type="Override" Lifetime="Loop"> <Loop> <Setup> <Param>CUR_PARAM_ID</Param> <From>0</From> <Inc>1</Inc> <While> <Or> <Arg NotEmpty="PARAM_PREFIX_#CUR_PARAM_ID#"/> <Arg NotEmpty="PARAM_SUFIX_#CUR_PARAM_ID#"/> </Or> </While> </Setup> <Do> <Parameters Type="Override" Lifetime="Iteration"> <PARAM_PREFIX Process="Param">PARAM_PREFIX_#CUR_PARAM_ID#</PARAM_PREFIX> <PARAM_SUFIX Process="Param">PARAM_SUFIX_#CUR_PARAM_ID#</PARAM_SUFIX> </Parameters> <Parameters Type="Override" Lifetime="Iteration"> <PARAM_FINAL Process="Param">#PARAM_PREFIX##CUR_ID##PARAM_SUFFIX#</PARAM_FINAL> </Parameters> <Parameters Type="Override" Lifetime="Loop"> <Condition NotEmpty="PARAM_FINAL"> <SaveParameters ID="MaxParam_FoundValue"> <FOUND_VALUE>True</FOUND_VALUE> <MAX_ITERATION Process="Int">#MAX_ITERATION# #CUR_ID# max</MAX_ITERATION> </SaveParameters> </Condition> </Parameters> </Do> </Loop> <LoadParameters ID="MaxParam_FoundValue"/> <Condition Valid="FOUND_VALUE"> <False> <Break/> </False> </Condition> </Parameters> </Do> </Loop> <LoadParameters ID="MaxParam_FoundValue"/> </Parameters> <ReturnParameters> <#OUTGOING_PARAM# Process="Int">#MAX_ITERATION#</#OUTGOING_PARAM#> </ReturnParameters> </ParametersFn>Parameters initialization:
- Default
Parameters set:
- MAX_VALUE
- PARAM_PREFIX
- PARAM_SUFFIX
- MAX_ITERATION
- OUTGOING_PARAM
- Override
Parameters read:
- CUR_PARAM_ID
Parameters set:
- CUR_ID
- FOUND_VALUE
- MAX_ITERATION (using MAX_ITERATION)
- CUR_PARAM_ID
- PARAM_PREFIX (using CUR_PARAM_ID)
- PARAM_SUFIX (using CUR_PARAM_ID)
- PARAM_FINAL (using PARAM_PREFIX, CUR_ID, PARAM_SUFFIX)
Condition: NotEmpty(PARAM_FINAL)
- Case: True
Parameters set:
- FOUND_VALUE
- MAX_ITERATION (using MAX_ITERATION, CUR_ID)
Condition: Valid(FOUND_VALUE)
- Case: False
Return parameters:
Parameters set:
- #OUTGOING_PARAM# (using MAX_ITERATION)
- Default
ASOBO_Get_Non_Linear_Animation_Code
Definition from XML<ParametersFn Name="ASOBO_Get_Non_Linear_Animation_Code"> <Parameters Type="Default"> <SELECTION>50</SELECTION> <ANIM_VALUE_0>0</ANIM_VALUE_0> <REF_VALUE_0>0</REF_VALUE_0> <ANIM_VALUE_1>100</ANIM_VALUE_1> <REF_VALUE_1>100</REF_VALUE_1> <ANIM_LENGTH>100</ANIM_LENGTH> <MAX_POINT_INDEX>1</MAX_POINT_INDEX> <MAX_DISPLAYABLE>100</MAX_DISPLAYABLE> <MIN_DISPLAYABLE>0</MIN_DISPLAYABLE> <EXIT_TEMPLATE>ASOBO_GT_Anim_Code</EXIT_TEMPLATE> <EXIT_PARAM_NAME>ANIM_CODE</EXIT_PARAM_NAME> <CONTENT/> </Parameters> <Parameters Type="Override"> <ANIM_VAL_PREVIOUS_POINT Process="Param">ANIM_VALUE_#MAX_POINT_INDEX#</ANIM_VAL_PREVIOUS_POINT> <REF_VAL_PREVIOUS_POINT Process="Param">REF_VALUE_#MAX_POINT_INDEX#</REF_VAL_PREVIOUS_POINT> <MAX_POINT_INDEX_MINUS_1 Process="Param">#MAX_POINT_INDEX# 1 -</MAX_POINT_INDEX_MINUS_1> </Parameters> <Parameters Type="Override"> <Loop> <Setup> <Param>NEXT_ID</Param> <From>#MAX_POINT_INDEX#</From> <Inc>-1</Inc> <To>0</To> </Setup> <Do> <Parameters Type="Override" Lifetime="Loop"> <ANIM_VAL_CURRENT_POINT Process="Param">ANIM_VALUE_#NEXT_ID#</ANIM_VAL_CURRENT_POINT> <REF_VAL_CURRENT_POINT Process="Param">REF_VALUE_#NEXT_ID#</REF_VAL_CURRENT_POINT> </Parameters> <Parameters Type="Override" Lifetime="Loop"> <CONTENT> #CONTENT# l0 #REF_VAL_CURRENT_POINT# > if{ l0 #REF_VAL_CURRENT_POINT# - #REF_VAL_PREVIOUS_POINT# #REF_VAL_CURRENT_POINT# - / #ANIM_VAL_PREVIOUS_POINT# #ANIM_VAL_CURRENT_POINT# - * #ANIM_VAL_CURRENT_POINT# + sp1 g1 } </CONTENT> <ANIM_VAL_PREVIOUS_POINT Process="Param">ANIM_VALUE_#NEXT_ID#</ANIM_VAL_PREVIOUS_POINT> <REF_VAL_PREVIOUS_POINT Process="Param">REF_VALUE_#NEXT_ID#</REF_VAL_PREVIOUS_POINT> </Parameters> </Do> <Then> <RETURN_VALUE> #SELECTION# #MAX_DISPLAYABLE# min #MIN_DISPLAYABLE# max sp0 #CONTENT# :1 l1 </RETURN_VALUE> </Then> </Loop> </Parameters> <ReturnParameters> <#EXIT_PARAM_NAME#>#RETURN_VALUE#</#EXIT_PARAM_NAME#> </ReturnParameters> </ParametersFn>Parameters initialization:
- Default
Parameters set:
- SELECTION
- ANIM_VALUE_0
- REF_VALUE_0
- ANIM_VALUE_1
- REF_VALUE_1
- ANIM_LENGTH
- MAX_POINT_INDEX
- MAX_DISPLAYABLE
- MIN_DISPLAYABLE
- EXIT_TEMPLATE
- EXIT_PARAM_NAME
- CONTENT
- Override
Parameters set:
- ANIM_VAL_PREVIOUS_POINT (using MAX_POINT_INDEX)
- REF_VAL_PREVIOUS_POINT (using MAX_POINT_INDEX)
- MAX_POINT_INDEX_MINUS_1 (using MAX_POINT_INDEX)
- Override
Parameters read:
- MAX_POINT_INDEX
Parameters set:
- NEXT_ID
- ANIM_VAL_CURRENT_POINT (using NEXT_ID)
- REF_VAL_CURRENT_POINT (using NEXT_ID)
- CONTENT (using CONTENT, REF_VAL_CURRENT_POINT, REF_VAL_PREVIOUS_POINT, ANIM_VAL_PREVIOUS_POINT, ANIM_VAL_CURRENT_POINT)
- ANIM_VAL_PREVIOUS_POINT (using NEXT_ID)
- REF_VAL_PREVIOUS_POINT (using NEXT_ID)
- RETURN_VALUE (using SELECTION, MAX_DISPLAYABLE, MIN_DISPLAYABLE, CONTENT)
Return parameters:
Parameters set:
- #EXIT_PARAM_NAME# (using RETURN_VALUE)
- Default