Autopilot
WorkingTitle\GlassCockpit\Epic2v2\Autopilot.xml
Source XML
<ModelBehaviors>
<Include ModelBehaviorFile="ASOBO\Inputs\Helpers.xml" />
<Include RelativeFile="Generic.xml" />
<!--
Defines an autopilot panel to use with the Epic2
-->
<Template Name="WT_Epic2_Autopilot_Panel_Template">
<Parameters Type="Default">
<ID>1</ID>
<HAS_AUTOTHROTTLE>True</HAS_AUTOTHROTTLE>
</Parameters>
<Parameters Type="Default">
<Condition Valid="HAS_AUTOTHROTTLE">
<True>
<NODE_COUNT>21</NODE_COUNT>
</True>
<False>
<NODE_COUNT>20</NODE_COUNT>
</False>
</Condition>
<NODE_ID_1>Knob_VerticalSpeed</NODE_ID_1>
<NODE_ID_2>Knob_Heading</NODE_ID_2>
<NODE_ID_3>Knob_SpeedMach</NODE_ID_3>
<NODE_ID_4>Knob_Altitude_100</NODE_ID_4>
<NODE_ID_5>Knob_Altitude_1000</NODE_ID_5>
<NODE_ID_6>Knob_Minimums</NODE_ID_6>
<NODE_ID_7>Switch_Heading_Track</NODE_ID_7>
<NODE_ID_8>Push_Bank</NODE_ID_8>
<NODE_ID_9>Push_Approach</NODE_ID_9>
<NODE_ID_10>Push_Heading</NODE_ID_10>
<NODE_ID_11>Push_Navigation</NODE_ID_11>
<NODE_ID_12>Switch_Speed_Mode</NODE_ID_12>
<NODE_ID_13>Push_VerticalSpeed</NODE_ID_13>
<NODE_ID_14>Push_FlightLevelChange</NODE_ID_14>
<NODE_ID_15>Push_Altitude</NODE_ID_15>
<NODE_ID_16>Push_VerticalNavigation</NODE_ID_16>
<NODE_ID_17>Push_FlightDirector</NODE_ID_17>
<NODE_ID_18>Push_FlightDirector_Coupling</NODE_ID_18>
<NODE_ID_19>Push_Autopilot</NODE_ID_19>
<NODE_ID_20>Push_YawDamper</NODE_ID_20>
<NODE_ID_21>Push_Autothrottle</NODE_ID_21>
</Parameters>
<Parameters Type="Override">
<HAS_PUSH_KNOB_HEADING>True</HAS_PUSH_KNOB_HEADING>
<HAS_PUSH_KNOB_SPEEDMACH>True</HAS_PUSH_KNOB_SPEEDMACH>
</Parameters>
<Loop>
<Setup>
<Param>CUR_ID</Param>
<From>1</From>
<Inc>1</Inc>
<To>#NODE_COUNT#</To>
</Setup>
<Do>
<Parameters Type="Override">
<NODE_NAME Process="Param">NODE_ID_#CUR_ID#</NODE_NAME>
</Parameters>
<Parameters Type="Default">
<NODE_ID_#NODE_NAME#>AUTOPILOT_#NODE_NAME#_#ID#</NODE_ID_#NODE_NAME#>
<NODE_ID_STATUS_LIGHT_#NODE_NAME#>AUTOPILOT_#NODE_NAME#_Active_#ID#</NODE_ID_STATUS_LIGHT_#NODE_NAME#>
<HAS_PUSH_#NODE_NAME#>False</HAS_PUSH_#NODE_NAME#>
</Parameters>
<Parameters Type="Default">
<ANIM_NAME_#NODE_NAME# Process="Param">NODE_ID_#NODE_NAME#</ANIM_NAME_#NODE_NAME#>
</Parameters>
<Parameters Type="Override">
<NODE_ID Process="Param">NODE_ID_#NODE_NAME#</NODE_ID>
<ANIM_NAME Process="Param">ANIM_NAME_#NODE_NAME#</ANIM_NAME>
<ACTIVE_NODE_ID Process="Param">NODE_ID_STATUS_LIGHT_#NODE_NAME#</ACTIVE_NODE_ID>
<HAS_PUSH Process="Param">HAS_PUSH_#NODE_NAME#</HAS_PUSH>
</Parameters>
<Parameters Type="Default">
<ANIM_NAME_PUSH_#NODE_NAME#>#ANIM_NAME#_Push</ANIM_NAME_PUSH_#NODE_NAME#>
</Parameters>
<UseTemplate Name="WT_Epic2_Autopilot_#NODE_NAME#_Template">
<DONT_APPEND_ID>True</DONT_APPEND_ID>
<Condition Valid="HAS_PUSH">
<True>
<ANIM_NAME_PUSH Process="Param">ANIM_NAME_PUSH_#NODE_NAME#</ANIM_NAME_PUSH>
</True>
</Condition>
</UseTemplate>
</Do>
</Loop>
<!-- HDG/T Button -->
<!-- <UseTemplate Name="ASOBO_AUTOPILOT_Push_Heading_Template">
<NODE_ID>#NODE_ID_PUSH_HEADING#</NODE_ID>
<ACTIVE_NODE_ID>#NODE_ID_STATUS_LIGHT_PUSH_HEADING#</ACTIVE_NODE_ID>
<EMISSIVE_NODE_ID>#NODE_ID_PUSH_HEADING#_Text</EMISSIVE_NODE_ID>
</UseTemplate> -->
</Template>
<!--
A generic horizontal switch used by the Epic2 autopilot.
Required parameters:
- NODE_ID
-->
<Template Name="WT_Epic2_Autopilot_Switch_Template">
<Parameters Type="Default">
<NODE_ID></NODE_ID>
<DONT_APPEND_ID>True</DONT_APPEND_ID>
<CODE_ON></CODE_ON>
<CODE_OFF></CODE_OFF>
<WWISE_EVENT_1>epic2_wwise_event_on</WWISE_EVENT_1>
<WWISE_EVENT_2>epic2_wwise_event_off</WWISE_EVENT_2>
</Parameters>
<Parameters Type="Default">
<ANIM_NAME>#NODE_ID#</ANIM_NAME>
<IE_NAME>#NODE_ID#</IE_NAME>
</Parameters>
<Parameters Type="Default">
<VAR_NAME>XMLVAR_#IE_NAME#</VAR_NAME>
<TT_DESCRIPTION>@TT_Package.EPIC2_AP_#IE_NAME#_ACTION</TT_DESCRIPTION>
<TOOLTIP_TITLE>@TT_Package.EPIC2_AP_#IE_NAME#_TITLE</TOOLTIP_TITLE>
<TT_VALUE_ON>@TT_Package.EPIC2_AP_#IE_NAME#_ON_VALUE</TT_VALUE_ON>
<TT_VALUE_OFF>@TT_Package.EPIC2_AP_#IE_NAME#_OFF_VALUE</TT_VALUE_OFF>
</Parameters>
<Parameters Type="Default">
<GET_STATE_EXTERNAL>(L:#VAR_NAME#) sp0</GET_STATE_EXTERNAL>
</Parameters>
<UseTemplate Name="ASOBO_INSTRUMENT_Base_Template">
<INTERACTION_TYPE>Switch</INTERACTION_TYPE>
<SWITCH_DIRECTION>Horizontal</SWITCH_DIRECTION>
<SET_STATE_ON>#CODE_ON# 1 (>L:#VAR_NAME#)</SET_STATE_ON>
<SET_STATE_OFF>#CODE_OFF# 0 (>L:#VAR_NAME#)</SET_STATE_OFF>
</UseTemplate>
</Template>
<!--
Defines the behaviour of the flight director/ap coupling button and indicators.
The Lvar values should be a bitmask as follows:
- 1: left
- 2: right
Therefore 3 = both for dual-coupled ILS approaches (the button can't change the coupling in that state).
-->
<Template Name="WT_Epic2_Autopilot_Push_FlightDirector_Coupling_Template">
<Parameters Type="Default">
<NODE_ID>AUTOPILOT_Push_FlightDirectorCoupling</NODE_ID>
<IE_NAME>Autopilot_LR</IE_NAME>
<INTERACTION_TYPE>Push</INTERACTION_TYPE>
<DONT_APPEND_ID>True</DONT_APPEND_ID>
<WWISE_EVENT_1>epic2_wwise_event_on</WWISE_EVENT_1>
<WWISE_EVENT_2>epic2_wwise_event_off</WWISE_EVENT_2>
</Parameters>
<Parameters Type="Default">
<ANIM_NAME>#NODE_ID#</ANIM_NAME>
<VAR_NAME>XMLVAR_#IE_NAME#</VAR_NAME>
<TT_DESCRIPTION_ID>@TT_Package.EPIC2_AP_FD_COUPLING_ACTION</TT_DESCRIPTION_ID>
<TOOLTIP_TITLE>@TT_Package.EPIC2_AP_FD_COUPLING_TITLE</TOOLTIP_TITLE>
<TT_VALUE>(R:1:@TT_Package.GT_STATE_BOTH) (R:1:@TT_Package.GT_STATE_RIGHT) (R:1:@TT_Package.GT_STATE_LEFT) (R:1:@TT_Package.GT_STATE_OFF) 4 (L:XMLVAR_AUTOPILOT_LR) case</TT_VALUE>
</Parameters>
<Component ID="#NODE_ID#">
<UseTemplate Name="ASOBO_INSTRUMENT_Base_Template">
<SET_STATE_ON>(L:#VAR_NAME#) 3 < if{ 2 (>L:#VAR_NAME#) }</SET_STATE_ON>
<SET_STATE_OFF>(L:#VAR_NAME#) 3 < if{ 1 (>L:#VAR_NAME#) }</SET_STATE_OFF>
<GET_STATE_EXTERNAL>(L:#VAR_NAME#) 1 > sp0</GET_STATE_EXTERNAL>
<COMP_INIT_CODE>1 (>L:#VAR_NAME#)</COMP_INIT_CODE>
</UseTemplate>
</Component>
<Component ID="#NODE_ID#_L" Node="#NODE_ID#_Active_L">
<UseTemplate Name="ASOBO_GT_Emissive_Gauge">
<EMISSIVE_CODE>(L:#VAR_NAME#) 1 &</EMISSIVE_CODE>
</UseTemplate>
</Component>
<Component ID="#NODE_ID#_Active_R" Node="#NODE_ID#_Active_R">
<UseTemplate Name="ASOBO_GT_Emissive_Gauge">
<EMISSIVE_CODE>(L:#VAR_NAME#) 2 & 0 ></EMISSIVE_CODE>
</UseTemplate>
</Component>
</Template>
<!--
Defines the behaviour of a heading/track knob with push to sync.
-->
<Template Name="WT_Epic2_Autopilot_Knob_Heading_Template">
<Component ID="#NODE_ID#" Node="#NODE_ID#">
<Parameters Type="Default">
<KNOB_ID>Heading</KNOB_ID>
<HEADING_INDEX>1</HEADING_INDEX>
</Parameters>
<Parameters Type="Default">
<ANIM_NAME_KNOB>#ANIM_NAME#</ANIM_NAME_KNOB>
<ANIM_NAME_PUSH>#ANIM_NAME#_PUSH</ANIM_NAME_PUSH>
</Parameters>
<UseTemplate Name="ASOBO_AUTOPILOT_Push_Event_Only_Template">
<BTN_ID>Heading_Sync</BTN_ID>
<EVENT_TYPE>PUSH</EVENT_TYPE>
<SET_STATE_EXTERNAL>(>H:AP_HEADING_SYNC)</SET_STATE_EXTERNAL>
<TT_DESCRIPTION_ID>@TT_Package.AUTOPILOT_PUSH_HEADING_ACTION_HOLD</TT_DESCRIPTION_ID>
</UseTemplate>
<!-- knob -->
<UseTemplate Name="ASOBO_AUTOPILOT_Knob_Template">
<TYPE>PUSH</TYPE>
<ADDITIONAL_EVENT_TYPE>PUSH</ADDITIONAL_EVENT_TYPE>
<BTN_ID_EXTERNAL>Heading_Sync</BTN_ID_EXTERNAL>
<SET_STATE_EXTERNAL>1 -1 p0 0 > ? sp0 #HEADING_INDEX# (A:AUTOPILOT HEADING LOCK DIR:#HEADING_INDEX#, degrees) 1 l0 * + dnor (>K:2:HEADING_BUG_SET)</SET_STATE_EXTERNAL>
<TOOLTIP_TITLE>@TT_Package.AUTOPILOT_KNOB_HEADING_TITLE</TOOLTIP_TITLE>
<TT_DESCRIPTION_ID>@TT_Package.AUTOPILOT_KNOB_HEADING_ACTION_SET_ADJUST</TT_DESCRIPTION_ID>
<GET_TT_VALUE_STATE>360 (A:AUTOPILOT HEADING LOCK DIR:#HEADING_INDEX#, degrees) d 0 == ? sp0</GET_TT_VALUE_STATE>
<FORMAT_VALUE>l0 '%d°' @sprintf</FORMAT_VALUE>
<WWISE_EVENT_1>autopilot_altitude_100_knob</WWISE_EVENT_1>
<WWISE_EVENT_2>autopilot_altitude_100_knob</WWISE_EVENT_2>
<WWISE_EVENT>autopilot_altitude_100_knob</WWISE_EVENT>
</UseTemplate>
</Component>
</Template>
<!--
Defines the behaviour of a yaw damper button that turns the AP off when YD is turned off.
-->
<Template Name="WT_Epic2_Autopilot_Push_YawDamper_Template">
<Parameters Type="Default">
<DEFAULT_NAME>YawDamper</DEFAULT_NAME>
</Parameters>
<UseTemplate Name="ASOBO_AUTOPILOT_Push_Template">
<EMISSIVE_SIMVAR_ACTIVE>AUTOPILOT YAW DAMPER</EMISSIVE_SIMVAR_ACTIVE>
<SIMVAR_TO_WATCH_0>AUTOPILOT YAW DAMPER</SIMVAR_TO_WATCH_0>
<SIM_STATE_IS_ON_EXTERNAL>l0</SIM_STATE_IS_ON_EXTERNAL>
<GET_STATE_EXTERNAL>(A:AUTOPILOT YAW DAMPER, Bool) sp0</GET_STATE_EXTERNAL>
<SET_STATE_EXTERNAL>p0 ! if{ (>K:AUTOPILOT_OFF) } (>K:YAW_DAMPER_TOGGLE)</SET_STATE_EXTERNAL>
<BTN_ID>YD_Button</BTN_ID>
<TT_DESCRIPTION_ID>@TT_Package.AUTOPILOT_PUSH_YAWDAMPER_ACTION_SET</TT_DESCRIPTION_ID>
<TOOLTIP_TITLE>@TT_Package.AUTOPILOT_PUSH_YAWDAMPER_TITLE</TOOLTIP_TITLE>
</UseTemplate>
</Template>
<!--
Defines the behaviour of a pitch wheel that adjusts VS when in VS mode, or pitch in PIT mode, or nothing otherwise.
An event is emitted if the wheel is turned while not in VS or PIT mode (H:AP_PITCH_WHEEL_TURNED) for the AP to act on.
-->
<!-- FIXME need this in systems.cfg autopilot section:
min_vertical_speed_ref=-5000
max_vertical_speed_ref=5000
-->
<Template Name="WT_Epic2_Autopilot_Knob_VerticalSpeed_Template">
<Parameters Type="Default">
<NODE_ID>AUTOPILOT_Knob_VerticalSpeed_#ID#</NODE_ID>
<ANIM_NAME>AUTOPILOT_Knob_VerticalSpeed_#ID#</ANIM_NAME>
<PART_ID>AUTOPILOT_Knob_VerticalSpeed</PART_ID>
<WWISE_EVENT>autopilot_verticalspeed_knob</WWISE_EVENT>
<WWISE_EVENT_1>autopilot_knob_push_button_on</WWISE_EVENT_1>
<WWISE_EVENT_2>autopilot_knob_push_button_off</WWISE_EVENT_2>
<COUNT>36</COUNT>
<UP_DEC_DN_INC>True</UP_DEC_DN_INC>
<PITCH_INCREMENT>0.25</PITCH_INCREMENT>
<MAX_PITCH_KNOB>25</MAX_PITCH_KNOB>
<VS_INDEX>#ID#</VS_INDEX>
<VS_INCREMENT>100</VS_INCREMENT>
<MAX_VS>5000</MAX_VS>
<IS_WHEEL>True</IS_WHEEL>
<KNOB_ID>VerticalSpeed</KNOB_ID>
</Parameters>
<Component ID="#NODE_ID#" Node="#NODE_ID#">
<UseTemplate Name="ASOBO_AUTOPILOT_Knob_Template">
<TT_DESCRIPTION_ID>@TT_Package.AUTOPILOT_KNOB_VERTICALSPEED_ACTION_SET</TT_DESCRIPTION_ID>
<TOOLTIP_TITLE>@TT_Package.AUTOPILOT_KNOB_VERTICALSPEED_TITLE</TOOLTIP_TITLE>
<GET_TT_VALUE_STATE>(A:AUTOPILOT VERTICAL HOLD:#VS_INDEX#, Bool) sp2 (A:AUTOPILOT PITCH HOLD:#VS_INDEX#, Bool) s1 if{ (A:AUTOPILOT PITCH HOLD REF, degrees) neg } els{ (A:AUTOPILOT VERTICAL HOLD VAR:#VS_INDEX#, feet per minute) } sp0</GET_TT_VALUE_STATE>
<FORMAT_VALUE>l0 l1 if{ '%.2f °' (F:Format) } els{ l2 if{ '%d ft/min' (F:Format) } els{ 'N/A' } }</FORMAT_VALUE>
<SET_STATE_EXTERNAL>
1 -1 p0 0 > s1 ? sp0
(A:AUTOPILOT VERTICAL HOLD:#VS_INDEX#, Bool) if{
#VS_INDEX# (A:AUTOPILOT VERTICAL HOLD VAR:#VS_INDEX#, feet per minute) #VS_INCREMENT# l0 * + (>K:2:AP_VS_VAR_SET_ENGLISH)
} els{
(A:AUTOPILOT PITCH HOLD, Bool) if{
l1 if{ (>K:AP_PITCH_REF_INC_UP) } els{ (>K:AP_PITCH_REF_INC_DN) }
} els{
(>H:AP_PITCH_WHEEL_TURNED)
}
}
</SET_STATE_EXTERNAL>
<SWITCH_DIRECTION>Vertical</SWITCH_DIRECTION>
<THRESHOLD_Y_MOUSE>0.005</THRESHOLD_Y_MOUSE>
</UseTemplate>
</Component>
</Template>
<Template Name="WT_Epic2_Autopilot_Baro_Knob">
<Parameters Type="Default">
<BARO_ID>#ID#</BARO_ID>
<NODE_ID>AUTOPILOT_Knob_Baro_1_#ID#</NODE_ID>
<BTN_ID_EXTERNAL>Baro_#ID#_STD</BTN_ID_EXTERNAL>
<TT_DESCRIPTION_ID_BTN>@TT_Package.AUTOPILOT_KNOB_BARO_ACTION_SET_STD</TT_DESCRIPTION_ID_BTN>
</Parameters>
<Parameters Type="Default">
<ANIM_NAME>#NODE_ID#</ANIM_NAME>
</Parameters>
<UseTemplate Name="ASOBO_AUTOPILOT_Knob_Baro_Template">
<ADDITIONAL_EVENT_TYPE>PUSH</ADDITIONAL_EVENT_TYPE>
<BTN_SET_STATE_EXTERNAL>#BARO_ID# (>K:BAROMETRIC_STD_PRESSURE)</BTN_SET_STATE_EXTERNAL>
</UseTemplate>
</Template>
<Template Name="WT_Epic2_Autopilot_Push_Autothrottle_Template">
<Parameters Type="Default">
<DEFAULT_NAME>AutoThrottle</DEFAULT_NAME>
</Parameters>
<UseTemplate Name="ASOBO_AUTOPILOT_Push_Template">
<GET_STATE_EXTERNAL>(L:WT_Epic2_Autothrottle_Status) sp0</GET_STATE_EXTERNAL>
<SIM_STATE_IS_ON_EXTERNAL>l0 1 ></SIM_STATE_IS_ON_EXTERNAL>
<SET_STATE_EXTERNAL>0 (>K:AUTO_THROTTLE_ARM)</SET_STATE_EXTERNAL>
<BTN_ID>#DEFAULT_NAME#</BTN_ID>
<TT_DESCRIPTION_ID>COCKPIT.TOOLTIPS.AUTOPILOT_PANEL_AUTOTHROTTLE_OFF</TT_DESCRIPTION_ID>
<TOOLTIP_TITLE>@TT_Package.AUTOPILOT_PUSH_AUTOTHROTTLE_TITLE</TOOLTIP_TITLE>
<TT_VALUE>(R:1:@TT_Package.GT_STATE_ON) (R:1:@TT_Package.GT_STATE_ARMED) (R:1:@TT_Package.GT_STATE_DISCONNECTED) (R:1:@TT_Package.GT_STATE_OFF) 4 (L:WT_Epic2_Autothrottle_Status) case</TT_VALUE>
<LOCAL_VAR_TO_WATCH_0>WT_Epic2_Autothrottle_Status</LOCAL_VAR_TO_WATCH_0>
<EMISSIVE_CODE_ACTIVE>(L:WT_Epic2_Autothrottle_Status) 3 ==</EMISSIVE_CODE_ACTIVE>
</UseTemplate>
</Template>
<Template Name="WT_Epic2_Autopilot_Push_Bank_Template">
<Parameters Type="Default">
<DEFAULT_NAME>Bank</DEFAULT_NAME>
<VAR_NAME>WT_Epic2_Half_Bank_Mode</VAR_NAME>
</Parameters>
<UseTemplate Name="ASOBO_AUTOPILOT_Push_Template">
<GET_STATE_EXTERNAL>(L:#VAR_NAME#) sp0</GET_STATE_EXTERNAL>
<SIM_STATE_IS_ON_EXTERNAL>l0 1 ></SIM_STATE_IS_ON_EXTERNAL>
<SET_STATE_EXTERNAL>(L:#VAR_NAME#) ! (>L:#VAR_NAME#)</SET_STATE_EXTERNAL>
<BTN_ID>#DEFAULT_NAME#</BTN_ID>
<TOOLTIP_TITLE>@TT_Package.EPIC2_AP_HALF_BANK_TITLE</TOOLTIP_TITLE>
<TT_DESCRIPTION_ID>@TT_Package.EPIC2_AP_HALF_BANK_ACTION</TT_DESCRIPTION_ID>
<LOCAL_VAR_TO_WATCH_0>#VAR_NAME#</LOCAL_VAR_TO_WATCH_0>
<EMISSIVE_CODE_ACTIVE>(L:#VAR_NAME#) 1 ==</EMISSIVE_CODE_ACTIVE>
<TT_VALUE>(L:#VAR_NAME#) 1 == if{ @TT_On } els{ @TT_Off }</TT_VALUE>
</UseTemplate>
</Template>
<Template Name="WT_Epic2_Autopilot_Switch_Heading_Track_Template">
<UseTemplate Name="WT_Epic2_Autopilot_Switch_Template">
<IE_NAME>HDG_TRK</IE_NAME>
</UseTemplate>
</Template>
<Template Name="WT_Epic2_Autopilot_Switch_Speed_Mode_Template">
<UseTemplate Name="WT_Epic2_Autopilot_Switch_Template">
<IE_NAME>FMS_MAN</IE_NAME>
</UseTemplate>
</Template>
<Template Name="WT_Epic2_Autopilot_Push_VerticalSpeed_Template">
<UseTemplate Name="ASOBO_AUTOPILOT_Push_VerticalSpeed_Template">
<TYPE>FLC_AIRSPEED</TYPE>
</UseTemplate>
</Template>
<Template Name="WT_Epic2_Autopilot_Knob_Altitude_100_Template">
<UseTemplate Name="ASOBO_AUTOPILOT_Knob_Altitude_Template">
<PUSH/>
<INCREMENT>100</INCREMENT>
</UseTemplate>
</Template>
<Template Name="WT_Epic2_Autopilot_Knob_Altitude_1000_Template">
<UseTemplate Name="ASOBO_AUTOPILOT_Knob_Altitude_Template">
<INCREMENT>1000</INCREMENT>
</UseTemplate>
</Template>
<Template Name="WT_Epic2_Autopilot_Knob_Minimums_Template">
<Parameters Type="Default">
<NODE_ID>AUTOPILOT_Knob_Minimums_#ID#</NODE_ID>
</Parameters>
<Parameters Type="Default">
<ANIM_NAME>#NODE_ID#</ANIM_NAME>
<ANIM_NAME_PUSH>#NODE_ID#_Push</ANIM_NAME_PUSH>
</Parameters>
<Parameters Type="Default">
<ANIM_NAME_KNOB_PUSH>#ANIM_NAME_PUSH#</ANIM_NAME_KNOB_PUSH>
</Parameters>
<UseTemplate Name="WT_Epic2_Infinite_Knob_Html_Template">
<HAS_PUSH />
<CLOCKWISE_HTML_EVENT>MINIMUMS_INC</CLOCKWISE_HTML_EVENT>
<ANTICLOCKWISE_HTML_EVENT>MINIMUMS_DEC</ANTICLOCKWISE_HTML_EVENT>
<PUSH_HTML_EVENT>MINIMUMS_PRESS</PUSH_HTML_EVENT>
<TOOLTIP_TITLE_IS_DYNAMIC>False</TOOLTIP_TITLE_IS_DYNAMIC>
<TT_DESCRIPTION_IS_DYNAMIC>False</TT_DESCRIPTION_IS_DYNAMIC>
<TOOLTIP_TITLE_KNOB>@TT_Package.AIRLINER_KNOB_BARO_KNOB_MINS_TITLE</TOOLTIP_TITLE_KNOB>
<TT_DESCRIPTION_ID_KNOB>@TT_Package.AIRLINER_KNOB_BARO_KNOB_MINS_ACTION</TT_DESCRIPTION_ID_KNOB>
<TT_DESCRIPTION_ID_KNOB_PUSH>@TT_Package.EPIC2_MINIMUMS_TOGGLE_ACTION</TT_DESCRIPTION_ID_KNOB_PUSH>
</UseTemplate>
</Template>
<Template Name="WT_Epic2_Autopilot_Push_Autopilot_Template">
<UseTemplate Name="ASOBO_AUTOPILOT_Push_Autopilot_Template">
<ON_AP_MASTER_SWITCH>YD_ON</ON_AP_MASTER_SWITCH>
</UseTemplate>
</Template>
<Template Name="WT_Epic2_Autopilot_Push_Approach_Template">
<UseTemplate Name="ASOBO_AUTOPILOT_Push_Approach_Template">
<NO_SIMVAR_LIGHT />
<SIMVAR_TO_WATCH_0>AUTOPILOT APPROACH HOLD</SIMVAR_TO_WATCH_0>
<SIMVAR_TO_WATCH_1>AUTOPILOT GLIDESLOPE HOLD</SIMVAR_TO_WATCH_1>
</UseTemplate>
</Template>
<Template Name="WT_Epic2_Autopilot_Knob_SpeedMach_Template">
<UseTemplate Name="ASOBO_AUTOPILOT_Knob_SpeedMach_Template">
<TYPE>PUSH</TYPE>
</UseTemplate>
</Template>
<!--
The below templates are wrappers for default templates, to make the loop easier to implement.
-->
<Template Name="WT_Epic2_Autopilot_Push_Heading_Template">
<UseTemplate Name="ASOBO_AUTOPILOT_Push_Heading_Template" />
</Template>
<Template Name="WT_Epic2_Autopilot_Push_Navigation_Template">
<UseTemplate Name="ASOBO_AUTOPILOT_Push_Navigation_Template" />
</Template>
<Template Name="WT_Epic2_Autopilot_Push_FlightLevelChange_Template">
<UseTemplate Name="ASOBO_AUTOPILOT_Push_FlightLevelChange_Template" />
</Template>
<Template Name="WT_Epic2_Autopilot_Push_VerticalNavigation_Template">
<UseTemplate Name="ASOBO_AUTOPILOT_Push_Vertical_Navigation_Template" />
</Template>
<Template Name="WT_Epic2_Autopilot_Push_Altitude_Template">
<UseTemplate Name="ASOBO_AUTOPILOT_Push_Altitude_Template" />
</Template>
<Template Name="WT_Epic2_Autopilot_Push_FlightDirector_Template">
<UseTemplate Name="ASOBO_AUTOPILOT_Push_FlightDirector_Template" />
</Template>
</ModelBehaviors>
Includes
- ModelBehaviorFile: ASOBO\Inputs\Helpers.xml
- RelativeFile: Generic.xml
Templates
Template list
- WT_Epic2_Autopilot_Panel_Template
- WT_Epic2_Autopilot_Switch_Template
- WT_Epic2_Autopilot_Push_FlightDirector_Coupling_Template
- WT_Epic2_Autopilot_Knob_Heading_Template
- WT_Epic2_Autopilot_Push_YawDamper_Template
- WT_Epic2_Autopilot_Knob_VerticalSpeed_Template
- WT_Epic2_Autopilot_Baro_Knob
- WT_Epic2_Autopilot_Push_Autothrottle_Template
- WT_Epic2_Autopilot_Push_Bank_Template
- WT_Epic2_Autopilot_Switch_Heading_Track_Template
- WT_Epic2_Autopilot_Switch_Speed_Mode_Template
- WT_Epic2_Autopilot_Push_VerticalSpeed_Template
- WT_Epic2_Autopilot_Knob_Altitude_100_Template
- WT_Epic2_Autopilot_Knob_Altitude_1000_Template
- WT_Epic2_Autopilot_Knob_Minimums_Template
- WT_Epic2_Autopilot_Push_Autopilot_Template
- WT_Epic2_Autopilot_Push_Approach_Template
- WT_Epic2_Autopilot_Knob_SpeedMach_Template
- WT_Epic2_Autopilot_Push_Heading_Template
- WT_Epic2_Autopilot_Push_Navigation_Template
- WT_Epic2_Autopilot_Push_FlightLevelChange_Template
- WT_Epic2_Autopilot_Push_VerticalNavigation_Template
- WT_Epic2_Autopilot_Push_Altitude_Template
- WT_Epic2_Autopilot_Push_FlightDirector_Template
WT_Epic2_Autopilot_Panel_Template
Definition from XML<Template Name="WT_Epic2_Autopilot_Panel_Template"> <Parameters Type="Default"> <ID>1</ID> <HAS_AUTOTHROTTLE>True</HAS_AUTOTHROTTLE> </Parameters> <Parameters Type="Default"> <Condition Valid="HAS_AUTOTHROTTLE"> <True> <NODE_COUNT>21</NODE_COUNT> </True> <False> <NODE_COUNT>20</NODE_COUNT> </False> </Condition> <NODE_ID_1>Knob_VerticalSpeed</NODE_ID_1> <NODE_ID_2>Knob_Heading</NODE_ID_2> <NODE_ID_3>Knob_SpeedMach</NODE_ID_3> <NODE_ID_4>Knob_Altitude_100</NODE_ID_4> <NODE_ID_5>Knob_Altitude_1000</NODE_ID_5> <NODE_ID_6>Knob_Minimums</NODE_ID_6> <NODE_ID_7>Switch_Heading_Track</NODE_ID_7> <NODE_ID_8>Push_Bank</NODE_ID_8> <NODE_ID_9>Push_Approach</NODE_ID_9> <NODE_ID_10>Push_Heading</NODE_ID_10> <NODE_ID_11>Push_Navigation</NODE_ID_11> <NODE_ID_12>Switch_Speed_Mode</NODE_ID_12> <NODE_ID_13>Push_VerticalSpeed</NODE_ID_13> <NODE_ID_14>Push_FlightLevelChange</NODE_ID_14> <NODE_ID_15>Push_Altitude</NODE_ID_15> <NODE_ID_16>Push_VerticalNavigation</NODE_ID_16> <NODE_ID_17>Push_FlightDirector</NODE_ID_17> <NODE_ID_18>Push_FlightDirector_Coupling</NODE_ID_18> <NODE_ID_19>Push_Autopilot</NODE_ID_19> <NODE_ID_20>Push_YawDamper</NODE_ID_20> <NODE_ID_21>Push_Autothrottle</NODE_ID_21> </Parameters> <Parameters Type="Override"> <HAS_PUSH_KNOB_HEADING>True</HAS_PUSH_KNOB_HEADING> <HAS_PUSH_KNOB_SPEEDMACH>True</HAS_PUSH_KNOB_SPEEDMACH> </Parameters> <Loop> <Setup> <Param>CUR_ID</Param> <From>1</From> <Inc>1</Inc> <To>#NODE_COUNT#</To> </Setup> <Do> <Parameters Type="Override"> <NODE_NAME Process="Param">NODE_ID_#CUR_ID#</NODE_NAME> </Parameters> <Parameters Type="Default"> <NODE_ID_#NODE_NAME#>AUTOPILOT_#NODE_NAME#_#ID#</NODE_ID_#NODE_NAME#> <NODE_ID_STATUS_LIGHT_#NODE_NAME#>AUTOPILOT_#NODE_NAME#_Active_#ID#</NODE_ID_STATUS_LIGHT_#NODE_NAME#> <HAS_PUSH_#NODE_NAME#>False</HAS_PUSH_#NODE_NAME#> </Parameters> <Parameters Type="Default"> <ANIM_NAME_#NODE_NAME# Process="Param">NODE_ID_#NODE_NAME#</ANIM_NAME_#NODE_NAME#> </Parameters> <Parameters Type="Override"> <NODE_ID Process="Param">NODE_ID_#NODE_NAME#</NODE_ID> <ANIM_NAME Process="Param">ANIM_NAME_#NODE_NAME#</ANIM_NAME> <ACTIVE_NODE_ID Process="Param">NODE_ID_STATUS_LIGHT_#NODE_NAME#</ACTIVE_NODE_ID> <HAS_PUSH Process="Param">HAS_PUSH_#NODE_NAME#</HAS_PUSH> </Parameters> <Parameters Type="Default"> <ANIM_NAME_PUSH_#NODE_NAME#>#ANIM_NAME#_Push</ANIM_NAME_PUSH_#NODE_NAME#> </Parameters> <UseTemplate Name="WT_Epic2_Autopilot_#NODE_NAME#_Template"> <DONT_APPEND_ID>True</DONT_APPEND_ID> <Condition Valid="HAS_PUSH"> <True> <ANIM_NAME_PUSH Process="Param">ANIM_NAME_PUSH_#NODE_NAME#</ANIM_NAME_PUSH> </True> </Condition> </UseTemplate> </Do> </Loop> </Template>Parameters initialization:
- Default
Parameters set:
- ID
- HAS_AUTOTHROTTLE
- Default
Parameters set:
- NODE_ID_1
- NODE_ID_2
- NODE_ID_3
- NODE_ID_4
- NODE_ID_5
- NODE_ID_6
- NODE_ID_7
- NODE_ID_8
- NODE_ID_9
- NODE_ID_10
- NODE_ID_11
- NODE_ID_12
- NODE_ID_13
- NODE_ID_14
- NODE_ID_15
- NODE_ID_16
- NODE_ID_17
- NODE_ID_18
- NODE_ID_19
- NODE_ID_20
- NODE_ID_21
Condition: Valid(HAS_AUTOTHROTTLE)
- Case: True
Parameters set:
- NODE_COUNT
- Case: False
Parameters set:
- NODE_COUNT
- Override
Parameters set:
- HAS_PUSH_KNOB_HEADING
- HAS_PUSH_KNOB_SPEEDMACH
Parameters read:
- NODE_COUNT
- NODE_NAME
Parameters set:
- CUR_ID
- NODE_NAME (using CUR_ID)
- NODE_ID_#NODE_NAME# (using NODE_NAME, ID)
- NODE_ID_STATUS_LIGHT_#NODE_NAME# (using NODE_NAME, ID)
- HAS_PUSH_#NODE_NAME#
- ANIM_NAME_#NODE_NAME# (using NODE_NAME)
- NODE_ID (using NODE_NAME)
- ANIM_NAME (using NODE_NAME)
- ACTIVE_NODE_ID (using NODE_NAME)
- HAS_PUSH (using NODE_NAME)
- ANIM_NAME_PUSH_#NODE_NAME# (using ANIM_NAME)
Templates used:
- WT_Epic2_Autopilot_#NODE_NAME#_Template
- May resolve to the following template(s):
- WT_Epic2_Autopilot_NODE_ID_#CUR_ID#_Template
Parameters set:
- DONT_APPEND_ID
Condition: Valid(HAS_PUSH)
- Case: True
Parameters set:
- ANIM_NAME_PUSH (using NODE_NAME)
- May resolve to the following template(s):
- Default
WT_Epic2_Autopilot_Switch_Template
Definition from XML<Template Name="WT_Epic2_Autopilot_Switch_Template"> <Parameters Type="Default"> <NODE_ID/> <DONT_APPEND_ID>True</DONT_APPEND_ID> <CODE_ON/> <CODE_OFF/> <WWISE_EVENT_1>epic2_wwise_event_on</WWISE_EVENT_1> <WWISE_EVENT_2>epic2_wwise_event_off</WWISE_EVENT_2> </Parameters> <Parameters Type="Default"> <ANIM_NAME>#NODE_ID#</ANIM_NAME> <IE_NAME>#NODE_ID#</IE_NAME> </Parameters> <Parameters Type="Default"> <VAR_NAME>XMLVAR_#IE_NAME#</VAR_NAME> <TT_DESCRIPTION>@TT_Package.EPIC2_AP_#IE_NAME#_ACTION</TT_DESCRIPTION> <TOOLTIP_TITLE>@TT_Package.EPIC2_AP_#IE_NAME#_TITLE</TOOLTIP_TITLE> <TT_VALUE_ON>@TT_Package.EPIC2_AP_#IE_NAME#_ON_VALUE</TT_VALUE_ON> <TT_VALUE_OFF>@TT_Package.EPIC2_AP_#IE_NAME#_OFF_VALUE</TT_VALUE_OFF> </Parameters> <Parameters Type="Default"> <GET_STATE_EXTERNAL>(L:#VAR_NAME#) sp0</GET_STATE_EXTERNAL> </Parameters> <UseTemplate Name="ASOBO_INSTRUMENT_Base_Template"> <INTERACTION_TYPE>Switch</INTERACTION_TYPE> <SWITCH_DIRECTION>Horizontal</SWITCH_DIRECTION> <SET_STATE_ON>#CODE_ON# 1 (>L:#VAR_NAME#)</SET_STATE_ON> <SET_STATE_OFF>#CODE_OFF# 0 (>L:#VAR_NAME#)</SET_STATE_OFF> </UseTemplate> </Template>Parameters initialization:
- Default
Parameters set:
- NODE_ID
- DONT_APPEND_ID
- CODE_ON
- CODE_OFF
- WWISE_EVENT_1
- WWISE_EVENT_2
- Default
Parameters set:
- ANIM_NAME (using NODE_ID)
- IE_NAME (using NODE_ID)
- Default
Parameters set:
- VAR_NAME (using IE_NAME)
- TT_DESCRIPTION (using IE_NAME)
- TOOLTIP_TITLE (using IE_NAME)
- TT_VALUE_ON (using IE_NAME)
- TT_VALUE_OFF (using IE_NAME)
- Default
Parameters set:
- GET_STATE_EXTERNAL (using VAR_NAME)
Templates used:
- ASOBO_INSTRUMENT_Base_Template
Parameters set:
- INTERACTION_TYPE
- SWITCH_DIRECTION
- SET_STATE_ON (using CODE_ON, VAR_NAME)
- SET_STATE_OFF (using CODE_OFF, VAR_NAME)
- Default
WT_Epic2_Autopilot_Push_FlightDirector_Coupling_Template
Definition from XML<Template Name="WT_Epic2_Autopilot_Push_FlightDirector_Coupling_Template"> <Parameters Type="Default"> <NODE_ID>AUTOPILOT_Push_FlightDirectorCoupling</NODE_ID> <IE_NAME>Autopilot_LR</IE_NAME> <INTERACTION_TYPE>Push</INTERACTION_TYPE> <DONT_APPEND_ID>True</DONT_APPEND_ID> <WWISE_EVENT_1>epic2_wwise_event_on</WWISE_EVENT_1> <WWISE_EVENT_2>epic2_wwise_event_off</WWISE_EVENT_2> </Parameters> <Parameters Type="Default"> <ANIM_NAME>#NODE_ID#</ANIM_NAME> <VAR_NAME>XMLVAR_#IE_NAME#</VAR_NAME> <TT_DESCRIPTION_ID>@TT_Package.EPIC2_AP_FD_COUPLING_ACTION</TT_DESCRIPTION_ID> <TOOLTIP_TITLE>@TT_Package.EPIC2_AP_FD_COUPLING_TITLE</TOOLTIP_TITLE> <TT_VALUE>(R:1:@TT_Package.GT_STATE_BOTH) (R:1:@TT_Package.GT_STATE_RIGHT) (R:1:@TT_Package.GT_STATE_LEFT) (R:1:@TT_Package.GT_STATE_OFF) 4 (L:XMLVAR_AUTOPILOT_LR) case</TT_VALUE> </Parameters> <Component ID="#NODE_ID#"> <UseTemplate Name="ASOBO_INSTRUMENT_Base_Template"> <SET_STATE_ON>(L:#VAR_NAME#) 3 < if{ 2 (>L:#VAR_NAME#) }</SET_STATE_ON> <SET_STATE_OFF>(L:#VAR_NAME#) 3 < if{ 1 (>L:#VAR_NAME#) }</SET_STATE_OFF> <GET_STATE_EXTERNAL>(L:#VAR_NAME#) 1 > sp0</GET_STATE_EXTERNAL> <COMP_INIT_CODE>1 (>L:#VAR_NAME#)</COMP_INIT_CODE> </UseTemplate> </Component> <Component ID="#NODE_ID#_L" Node="#NODE_ID#_Active_L"> <UseTemplate Name="ASOBO_GT_Emissive_Gauge"> <EMISSIVE_CODE>(L:#VAR_NAME#) 1 &</EMISSIVE_CODE> </UseTemplate> </Component> <Component ID="#NODE_ID#_Active_R" Node="#NODE_ID#_Active_R"> <UseTemplate Name="ASOBO_GT_Emissive_Gauge"> <EMISSIVE_CODE>(L:#VAR_NAME#) 2 & 0 ></EMISSIVE_CODE> </UseTemplate> </Component> </Template>Parameters initialization:
- Default
Parameters set:
- NODE_ID
- IE_NAME
- INTERACTION_TYPE
- DONT_APPEND_ID
- WWISE_EVENT_1
- WWISE_EVENT_2
- Default
Parameters set:
- ANIM_NAME (using NODE_ID)
- VAR_NAME (using IE_NAME)
- TT_DESCRIPTION_ID
- TOOLTIP_TITLE
- TT_VALUE
Parameters read:
- NODE_ID
Components:
- #NODE_ID#
Templates used:
- ASOBO_INSTRUMENT_Base_Template
Parameters set:
- SET_STATE_ON (using VAR_NAME)
- SET_STATE_OFF (using VAR_NAME)
- GET_STATE_EXTERNAL (using VAR_NAME)
- COMP_INIT_CODE (using VAR_NAME)
- ASOBO_INSTRUMENT_Base_Template
- #NODE_ID#_L (Node: #NODE_ID#_Active_L)
Templates used:
- ASOBO_GT_Emissive_Gauge
Parameters set:
- EMISSIVE_CODE (using VAR_NAME)
- ASOBO_GT_Emissive_Gauge
- #NODE_ID#_Active_R (Node: #NODE_ID#_Active_R)
Templates used:
- ASOBO_GT_Emissive_Gauge
Parameters set:
- EMISSIVE_CODE (using VAR_NAME)
- ASOBO_GT_Emissive_Gauge
- Default
WT_Epic2_Autopilot_Knob_Heading_Template
Definition from XML<Template Name="WT_Epic2_Autopilot_Knob_Heading_Template"> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <Parameters Type="Default"> <KNOB_ID>Heading</KNOB_ID> <HEADING_INDEX>1</HEADING_INDEX> </Parameters> <Parameters Type="Default"> <ANIM_NAME_KNOB>#ANIM_NAME#</ANIM_NAME_KNOB> <ANIM_NAME_PUSH>#ANIM_NAME#_PUSH</ANIM_NAME_PUSH> </Parameters> <UseTemplate Name="ASOBO_AUTOPILOT_Push_Event_Only_Template"> <BTN_ID>Heading_Sync</BTN_ID> <EVENT_TYPE>PUSH</EVENT_TYPE> <SET_STATE_EXTERNAL>(>H:AP_HEADING_SYNC)</SET_STATE_EXTERNAL> <TT_DESCRIPTION_ID>@TT_Package.AUTOPILOT_PUSH_HEADING_ACTION_HOLD</TT_DESCRIPTION_ID> </UseTemplate> <UseTemplate Name="ASOBO_AUTOPILOT_Knob_Template"> <TYPE>PUSH</TYPE> <ADDITIONAL_EVENT_TYPE>PUSH</ADDITIONAL_EVENT_TYPE> <BTN_ID_EXTERNAL>Heading_Sync</BTN_ID_EXTERNAL> <SET_STATE_EXTERNAL>1 -1 p0 0 > ? sp0 #HEADING_INDEX# (A:AUTOPILOT HEADING LOCK DIR:#HEADING_INDEX#, degrees) 1 l0 * + dnor (>K:2:HEADING_BUG_SET)</SET_STATE_EXTERNAL> <TOOLTIP_TITLE>@TT_Package.AUTOPILOT_KNOB_HEADING_TITLE</TOOLTIP_TITLE> <TT_DESCRIPTION_ID>@TT_Package.AUTOPILOT_KNOB_HEADING_ACTION_SET_ADJUST</TT_DESCRIPTION_ID> <GET_TT_VALUE_STATE>360 (A:AUTOPILOT HEADING LOCK DIR:#HEADING_INDEX#, degrees) d 0 == ? sp0</GET_TT_VALUE_STATE> <FORMAT_VALUE>l0 '%d°' @sprintf</FORMAT_VALUE> <WWISE_EVENT_1>autopilot_altitude_100_knob</WWISE_EVENT_1> <WWISE_EVENT_2>autopilot_altitude_100_knob</WWISE_EVENT_2> <WWISE_EVENT>autopilot_altitude_100_knob</WWISE_EVENT> </UseTemplate> </Component> </Template>Parameters read:
- NODE_ID
Components:
- #NODE_ID# (Node: #NODE_ID#)
Parameters set:
- KNOB_ID
- HEADING_INDEX
- ANIM_NAME_KNOB (using ANIM_NAME)
- ANIM_NAME_PUSH (using ANIM_NAME)
Templates used:
- ASOBO_AUTOPILOT_Push_Event_Only_Template
Parameters set:
- BTN_ID
- EVENT_TYPE
- SET_STATE_EXTERNAL
- TT_DESCRIPTION_ID
- ASOBO_AUTOPILOT_Knob_Template
Parameters set:
- TYPE
- ADDITIONAL_EVENT_TYPE
- BTN_ID_EXTERNAL
- SET_STATE_EXTERNAL (using HEADING_INDEX)
- TOOLTIP_TITLE
- TT_DESCRIPTION_ID
- GET_TT_VALUE_STATE (using HEADING_INDEX)
- FORMAT_VALUE
- WWISE_EVENT_1
- WWISE_EVENT_2
- WWISE_EVENT
WT_Epic2_Autopilot_Push_YawDamper_Template
Definition from XML<Template Name="WT_Epic2_Autopilot_Push_YawDamper_Template"> <Parameters Type="Default"> <DEFAULT_NAME>YawDamper</DEFAULT_NAME> </Parameters> <UseTemplate Name="ASOBO_AUTOPILOT_Push_Template"> <EMISSIVE_SIMVAR_ACTIVE>AUTOPILOT YAW DAMPER</EMISSIVE_SIMVAR_ACTIVE> <SIMVAR_TO_WATCH_0>AUTOPILOT YAW DAMPER</SIMVAR_TO_WATCH_0> <SIM_STATE_IS_ON_EXTERNAL>l0</SIM_STATE_IS_ON_EXTERNAL> <GET_STATE_EXTERNAL>(A:AUTOPILOT YAW DAMPER, Bool) sp0</GET_STATE_EXTERNAL> <SET_STATE_EXTERNAL>p0 ! if{ (>K:AUTOPILOT_OFF) } (>K:YAW_DAMPER_TOGGLE)</SET_STATE_EXTERNAL> <BTN_ID>YD_Button</BTN_ID> <TT_DESCRIPTION_ID>@TT_Package.AUTOPILOT_PUSH_YAWDAMPER_ACTION_SET</TT_DESCRIPTION_ID> <TOOLTIP_TITLE>@TT_Package.AUTOPILOT_PUSH_YAWDAMPER_TITLE</TOOLTIP_TITLE> </UseTemplate> </Template>Parameters initialization:
- Default
Parameters set:
- DEFAULT_NAME
Templates used:
- ASOBO_AUTOPILOT_Push_Template
Parameters set:
- EMISSIVE_SIMVAR_ACTIVE
- SIMVAR_TO_WATCH_0
- SIM_STATE_IS_ON_EXTERNAL
- GET_STATE_EXTERNAL
- SET_STATE_EXTERNAL
- BTN_ID
- TT_DESCRIPTION_ID
- TOOLTIP_TITLE
- Default
WT_Epic2_Autopilot_Knob_VerticalSpeed_Template
Definition from XML<Template Name="WT_Epic2_Autopilot_Knob_VerticalSpeed_Template"> <Parameters Type="Default"> <NODE_ID>AUTOPILOT_Knob_VerticalSpeed_#ID#</NODE_ID> <ANIM_NAME>AUTOPILOT_Knob_VerticalSpeed_#ID#</ANIM_NAME> <PART_ID>AUTOPILOT_Knob_VerticalSpeed</PART_ID> <WWISE_EVENT>autopilot_verticalspeed_knob</WWISE_EVENT> <WWISE_EVENT_1>autopilot_knob_push_button_on</WWISE_EVENT_1> <WWISE_EVENT_2>autopilot_knob_push_button_off</WWISE_EVENT_2> <COUNT>36</COUNT> <UP_DEC_DN_INC>True</UP_DEC_DN_INC> <PITCH_INCREMENT>0.25</PITCH_INCREMENT> <MAX_PITCH_KNOB>25</MAX_PITCH_KNOB> <VS_INDEX>#ID#</VS_INDEX> <VS_INCREMENT>100</VS_INCREMENT> <MAX_VS>5000</MAX_VS> <IS_WHEEL>True</IS_WHEEL> <KNOB_ID>VerticalSpeed</KNOB_ID> </Parameters> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <UseTemplate Name="ASOBO_AUTOPILOT_Knob_Template"> <TT_DESCRIPTION_ID>@TT_Package.AUTOPILOT_KNOB_VERTICALSPEED_ACTION_SET</TT_DESCRIPTION_ID> <TOOLTIP_TITLE>@TT_Package.AUTOPILOT_KNOB_VERTICALSPEED_TITLE</TOOLTIP_TITLE> <GET_TT_VALUE_STATE>(A:AUTOPILOT VERTICAL HOLD:#VS_INDEX#, Bool) sp2 (A:AUTOPILOT PITCH HOLD:#VS_INDEX#, Bool) s1 if{ (A:AUTOPILOT PITCH HOLD REF, degrees) neg } els{ (A:AUTOPILOT VERTICAL HOLD VAR:#VS_INDEX#, feet per minute) } sp0</GET_TT_VALUE_STATE> <FORMAT_VALUE>l0 l1 if{ '%.2f °' (F:Format) } els{ l2 if{ '%d ft/min' (F:Format) } els{ 'N/A' } }</FORMAT_VALUE> <SET_STATE_EXTERNAL> 1 -1 p0 0 > s1 ? sp0 (A:AUTOPILOT VERTICAL HOLD:#VS_INDEX#, Bool) if{ #VS_INDEX# (A:AUTOPILOT VERTICAL HOLD VAR:#VS_INDEX#, feet per minute) #VS_INCREMENT# l0 * + (>K:2:AP_VS_VAR_SET_ENGLISH) } els{ (A:AUTOPILOT PITCH HOLD, Bool) if{ l1 if{ (>K:AP_PITCH_REF_INC_UP) } els{ (>K:AP_PITCH_REF_INC_DN) } } els{ (>H:AP_PITCH_WHEEL_TURNED) } } </SET_STATE_EXTERNAL> <SWITCH_DIRECTION>Vertical</SWITCH_DIRECTION> <THRESHOLD_Y_MOUSE>0.005</THRESHOLD_Y_MOUSE> </UseTemplate> </Component> </Template>Parameters initialization:
- Default
Parameters set:
- NODE_ID (using ID)
- ANIM_NAME (using ID)
- PART_ID
- WWISE_EVENT
- WWISE_EVENT_1
- WWISE_EVENT_2
- COUNT
- UP_DEC_DN_INC
- PITCH_INCREMENT
- MAX_PITCH_KNOB
- VS_INDEX (using ID)
- VS_INCREMENT
- MAX_VS
- IS_WHEEL
- KNOB_ID
Parameters read:
- NODE_ID
Components:
- #NODE_ID# (Node: #NODE_ID#)
Templates used:
- ASOBO_AUTOPILOT_Knob_Template
Parameters set:
- TT_DESCRIPTION_ID
- TOOLTIP_TITLE
- GET_TT_VALUE_STATE (using VS_INDEX)
- FORMAT_VALUE
- SET_STATE_EXTERNAL (using VS_INDEX, VS_INCREMENT)
- SWITCH_DIRECTION
- THRESHOLD_Y_MOUSE
- ASOBO_AUTOPILOT_Knob_Template
- Default
WT_Epic2_Autopilot_Baro_Knob
Definition from XML<Template Name="WT_Epic2_Autopilot_Baro_Knob"> <Parameters Type="Default"> <BARO_ID>#ID#</BARO_ID> <NODE_ID>AUTOPILOT_Knob_Baro_1_#ID#</NODE_ID> <BTN_ID_EXTERNAL>Baro_#ID#_STD</BTN_ID_EXTERNAL> <TT_DESCRIPTION_ID_BTN>@TT_Package.AUTOPILOT_KNOB_BARO_ACTION_SET_STD</TT_DESCRIPTION_ID_BTN> </Parameters> <Parameters Type="Default"> <ANIM_NAME>#NODE_ID#</ANIM_NAME> </Parameters> <UseTemplate Name="ASOBO_AUTOPILOT_Knob_Baro_Template"> <ADDITIONAL_EVENT_TYPE>PUSH</ADDITIONAL_EVENT_TYPE> <BTN_SET_STATE_EXTERNAL>#BARO_ID# (>K:BAROMETRIC_STD_PRESSURE)</BTN_SET_STATE_EXTERNAL> </UseTemplate> </Template>Parameters initialization:
- Default
Parameters set:
- BARO_ID (using ID)
- NODE_ID (using ID)
- BTN_ID_EXTERNAL (using ID)
- TT_DESCRIPTION_ID_BTN
- Default
Parameters set:
- ANIM_NAME (using NODE_ID)
Templates used:
- ASOBO_AUTOPILOT_Knob_Baro_Template
Parameters set:
- ADDITIONAL_EVENT_TYPE
- BTN_SET_STATE_EXTERNAL (using BARO_ID)
- Default
WT_Epic2_Autopilot_Push_Autothrottle_Template
Definition from XML<Template Name="WT_Epic2_Autopilot_Push_Autothrottle_Template"> <Parameters Type="Default"> <DEFAULT_NAME>AutoThrottle</DEFAULT_NAME> </Parameters> <UseTemplate Name="ASOBO_AUTOPILOT_Push_Template"> <GET_STATE_EXTERNAL>(L:WT_Epic2_Autothrottle_Status) sp0</GET_STATE_EXTERNAL> <SIM_STATE_IS_ON_EXTERNAL>l0 1 ></SIM_STATE_IS_ON_EXTERNAL> <SET_STATE_EXTERNAL>0 (>K:AUTO_THROTTLE_ARM)</SET_STATE_EXTERNAL> <BTN_ID>#DEFAULT_NAME#</BTN_ID> <TT_DESCRIPTION_ID>COCKPIT.TOOLTIPS.AUTOPILOT_PANEL_AUTOTHROTTLE_OFF</TT_DESCRIPTION_ID> <TOOLTIP_TITLE>@TT_Package.AUTOPILOT_PUSH_AUTOTHROTTLE_TITLE</TOOLTIP_TITLE> <TT_VALUE>(R:1:@TT_Package.GT_STATE_ON) (R:1:@TT_Package.GT_STATE_ARMED) (R:1:@TT_Package.GT_STATE_DISCONNECTED) (R:1:@TT_Package.GT_STATE_OFF) 4 (L:WT_Epic2_Autothrottle_Status) case</TT_VALUE> <LOCAL_VAR_TO_WATCH_0>WT_Epic2_Autothrottle_Status</LOCAL_VAR_TO_WATCH_0> <EMISSIVE_CODE_ACTIVE>(L:WT_Epic2_Autothrottle_Status) 3 ==</EMISSIVE_CODE_ACTIVE> </UseTemplate> </Template>Parameters initialization:
- Default
Parameters set:
- DEFAULT_NAME
Templates used:
- ASOBO_AUTOPILOT_Push_Template
Parameters set:
- GET_STATE_EXTERNAL
- SIM_STATE_IS_ON_EXTERNAL
- SET_STATE_EXTERNAL
- BTN_ID (using DEFAULT_NAME)
- TT_DESCRIPTION_ID
- TOOLTIP_TITLE
- TT_VALUE
- LOCAL_VAR_TO_WATCH_0
- EMISSIVE_CODE_ACTIVE
- Default
WT_Epic2_Autopilot_Push_Bank_Template
Definition from XML<Template Name="WT_Epic2_Autopilot_Push_Bank_Template"> <Parameters Type="Default"> <DEFAULT_NAME>Bank</DEFAULT_NAME> <VAR_NAME>WT_Epic2_Half_Bank_Mode</VAR_NAME> </Parameters> <UseTemplate Name="ASOBO_AUTOPILOT_Push_Template"> <GET_STATE_EXTERNAL>(L:#VAR_NAME#) sp0</GET_STATE_EXTERNAL> <SIM_STATE_IS_ON_EXTERNAL>l0 1 ></SIM_STATE_IS_ON_EXTERNAL> <SET_STATE_EXTERNAL>(L:#VAR_NAME#) ! (>L:#VAR_NAME#)</SET_STATE_EXTERNAL> <BTN_ID>#DEFAULT_NAME#</BTN_ID> <TOOLTIP_TITLE>@TT_Package.EPIC2_AP_HALF_BANK_TITLE</TOOLTIP_TITLE> <TT_DESCRIPTION_ID>@TT_Package.EPIC2_AP_HALF_BANK_ACTION</TT_DESCRIPTION_ID> <LOCAL_VAR_TO_WATCH_0>#VAR_NAME#</LOCAL_VAR_TO_WATCH_0> <EMISSIVE_CODE_ACTIVE>(L:#VAR_NAME#) 1 ==</EMISSIVE_CODE_ACTIVE> <TT_VALUE>(L:#VAR_NAME#) 1 == if{ @TT_On } els{ @TT_Off }</TT_VALUE> </UseTemplate> </Template>Parameters initialization:
- Default
Parameters set:
- DEFAULT_NAME
- VAR_NAME
Templates used:
- ASOBO_AUTOPILOT_Push_Template
Parameters set:
- GET_STATE_EXTERNAL (using VAR_NAME)
- SIM_STATE_IS_ON_EXTERNAL
- SET_STATE_EXTERNAL (using VAR_NAME)
- BTN_ID (using DEFAULT_NAME)
- TOOLTIP_TITLE
- TT_DESCRIPTION_ID
- LOCAL_VAR_TO_WATCH_0 (using VAR_NAME)
- EMISSIVE_CODE_ACTIVE (using VAR_NAME)
- TT_VALUE (using VAR_NAME)
- Default
WT_Epic2_Autopilot_Switch_Heading_Track_Template
Definition from XML<Template Name="WT_Epic2_Autopilot_Switch_Heading_Track_Template"> <UseTemplate Name="WT_Epic2_Autopilot_Switch_Template"> <IE_NAME>HDG_TRK</IE_NAME> </UseTemplate> </Template>WT_Epic2_Autopilot_Switch_Speed_Mode_Template
Definition from XML<Template Name="WT_Epic2_Autopilot_Switch_Speed_Mode_Template"> <UseTemplate Name="WT_Epic2_Autopilot_Switch_Template"> <IE_NAME>FMS_MAN</IE_NAME> </UseTemplate> </Template>WT_Epic2_Autopilot_Push_VerticalSpeed_Template
Definition from XML<Template Name="WT_Epic2_Autopilot_Push_VerticalSpeed_Template"> <UseTemplate Name="ASOBO_AUTOPILOT_Push_VerticalSpeed_Template"> <TYPE>FLC_AIRSPEED</TYPE> </UseTemplate> </Template>Templates used:
- ASOBO_AUTOPILOT_Push_VerticalSpeed_Template
Parameters set:
- TYPE
- ASOBO_AUTOPILOT_Push_VerticalSpeed_Template
WT_Epic2_Autopilot_Knob_Altitude_100_Template
Definition from XML<Template Name="WT_Epic2_Autopilot_Knob_Altitude_100_Template"> <UseTemplate Name="ASOBO_AUTOPILOT_Knob_Altitude_Template"> <PUSH/> <INCREMENT>100</INCREMENT> </UseTemplate> </Template>Templates used:
- ASOBO_AUTOPILOT_Knob_Altitude_Template
Parameters set:
- PUSH
- INCREMENT
- ASOBO_AUTOPILOT_Knob_Altitude_Template
WT_Epic2_Autopilot_Knob_Altitude_1000_Template
Definition from XML<Template Name="WT_Epic2_Autopilot_Knob_Altitude_1000_Template"> <UseTemplate Name="ASOBO_AUTOPILOT_Knob_Altitude_Template"> <INCREMENT>1000</INCREMENT> </UseTemplate> </Template>Templates used:
- ASOBO_AUTOPILOT_Knob_Altitude_Template
Parameters set:
- INCREMENT
- ASOBO_AUTOPILOT_Knob_Altitude_Template
WT_Epic2_Autopilot_Knob_Minimums_Template
Definition from XML<Template Name="WT_Epic2_Autopilot_Knob_Minimums_Template"> <Parameters Type="Default"> <NODE_ID>AUTOPILOT_Knob_Minimums_#ID#</NODE_ID> </Parameters> <Parameters Type="Default"> <ANIM_NAME>#NODE_ID#</ANIM_NAME> <ANIM_NAME_PUSH>#NODE_ID#_Push</ANIM_NAME_PUSH> </Parameters> <Parameters Type="Default"> <ANIM_NAME_KNOB_PUSH>#ANIM_NAME_PUSH#</ANIM_NAME_KNOB_PUSH> </Parameters> <UseTemplate Name="WT_Epic2_Infinite_Knob_Html_Template"> <HAS_PUSH/> <CLOCKWISE_HTML_EVENT>MINIMUMS_INC</CLOCKWISE_HTML_EVENT> <ANTICLOCKWISE_HTML_EVENT>MINIMUMS_DEC</ANTICLOCKWISE_HTML_EVENT> <PUSH_HTML_EVENT>MINIMUMS_PRESS</PUSH_HTML_EVENT> <TOOLTIP_TITLE_IS_DYNAMIC>False</TOOLTIP_TITLE_IS_DYNAMIC> <TT_DESCRIPTION_IS_DYNAMIC>False</TT_DESCRIPTION_IS_DYNAMIC> <TOOLTIP_TITLE_KNOB>@TT_Package.AIRLINER_KNOB_BARO_KNOB_MINS_TITLE</TOOLTIP_TITLE_KNOB> <TT_DESCRIPTION_ID_KNOB>@TT_Package.AIRLINER_KNOB_BARO_KNOB_MINS_ACTION</TT_DESCRIPTION_ID_KNOB> <TT_DESCRIPTION_ID_KNOB_PUSH>@TT_Package.EPIC2_MINIMUMS_TOGGLE_ACTION</TT_DESCRIPTION_ID_KNOB_PUSH> </UseTemplate> </Template>Parameters initialization:
- Default
Parameters set:
- NODE_ID (using ID)
- Default
Parameters set:
- ANIM_NAME (using NODE_ID)
- ANIM_NAME_PUSH (using NODE_ID)
- Default
Parameters set:
- ANIM_NAME_KNOB_PUSH (using ANIM_NAME_PUSH)
Templates used:
- WT_Epic2_Infinite_Knob_Html_Template
Parameters set:
- HAS_PUSH
- CLOCKWISE_HTML_EVENT
- ANTICLOCKWISE_HTML_EVENT
- PUSH_HTML_EVENT
- TOOLTIP_TITLE_IS_DYNAMIC
- TT_DESCRIPTION_IS_DYNAMIC
- TOOLTIP_TITLE_KNOB
- TT_DESCRIPTION_ID_KNOB
- TT_DESCRIPTION_ID_KNOB_PUSH
- Default
WT_Epic2_Autopilot_Push_Autopilot_Template
Definition from XML<Template Name="WT_Epic2_Autopilot_Push_Autopilot_Template"> <UseTemplate Name="ASOBO_AUTOPILOT_Push_Autopilot_Template"> <ON_AP_MASTER_SWITCH>YD_ON</ON_AP_MASTER_SWITCH> </UseTemplate> </Template>Templates used:
- ASOBO_AUTOPILOT_Push_Autopilot_Template
Parameters set:
- ON_AP_MASTER_SWITCH
- ASOBO_AUTOPILOT_Push_Autopilot_Template
WT_Epic2_Autopilot_Push_Approach_Template
Definition from XML<Template Name="WT_Epic2_Autopilot_Push_Approach_Template"> <UseTemplate Name="ASOBO_AUTOPILOT_Push_Approach_Template"> <NO_SIMVAR_LIGHT/> <SIMVAR_TO_WATCH_0>AUTOPILOT APPROACH HOLD</SIMVAR_TO_WATCH_0> <SIMVAR_TO_WATCH_1>AUTOPILOT GLIDESLOPE HOLD</SIMVAR_TO_WATCH_1> </UseTemplate> </Template>Templates used:
- ASOBO_AUTOPILOT_Push_Approach_Template
Parameters set:
- NO_SIMVAR_LIGHT
- SIMVAR_TO_WATCH_0
- SIMVAR_TO_WATCH_1
- ASOBO_AUTOPILOT_Push_Approach_Template
WT_Epic2_Autopilot_Knob_SpeedMach_Template
Definition from XML<Template Name="WT_Epic2_Autopilot_Knob_SpeedMach_Template"> <UseTemplate Name="ASOBO_AUTOPILOT_Knob_SpeedMach_Template"> <TYPE>PUSH</TYPE> </UseTemplate> </Template>Templates used:
- ASOBO_AUTOPILOT_Knob_SpeedMach_Template
Parameters set:
- TYPE
- ASOBO_AUTOPILOT_Knob_SpeedMach_Template
WT_Epic2_Autopilot_Push_Heading_Template
Definition from XML<Template Name="WT_Epic2_Autopilot_Push_Heading_Template"> <UseTemplate Name="ASOBO_AUTOPILOT_Push_Heading_Template"/> </Template>Templates used:
- ASOBO_AUTOPILOT_Push_Heading_Template
WT_Epic2_Autopilot_Push_Navigation_Template
Definition from XML<Template Name="WT_Epic2_Autopilot_Push_Navigation_Template"> <UseTemplate Name="ASOBO_AUTOPILOT_Push_Navigation_Template"/> </Template>Templates used:
- ASOBO_AUTOPILOT_Push_Navigation_Template
WT_Epic2_Autopilot_Push_FlightLevelChange_Template
Definition from XML<Template Name="WT_Epic2_Autopilot_Push_FlightLevelChange_Template"> <UseTemplate Name="ASOBO_AUTOPILOT_Push_FlightLevelChange_Template"/> </Template>Templates used:
- ASOBO_AUTOPILOT_Push_FlightLevelChange_Template
WT_Epic2_Autopilot_Push_VerticalNavigation_Template
Definition from XML<Template Name="WT_Epic2_Autopilot_Push_VerticalNavigation_Template"> <UseTemplate Name="ASOBO_AUTOPILOT_Push_Vertical_Navigation_Template"/> </Template>Templates used:
- ASOBO_AUTOPILOT_Push_Vertical_Navigation_Template
WT_Epic2_Autopilot_Push_Altitude_Template
Definition from XML<Template Name="WT_Epic2_Autopilot_Push_Altitude_Template"> <UseTemplate Name="ASOBO_AUTOPILOT_Push_Altitude_Template"/> </Template>Templates used:
- ASOBO_AUTOPILOT_Push_Altitude_Template
WT_Epic2_Autopilot_Push_FlightDirector_Template
Definition from XML<Template Name="WT_Epic2_Autopilot_Push_FlightDirector_Template"> <UseTemplate Name="ASOBO_AUTOPILOT_Push_FlightDirector_Template"/> </Template>Templates used:
- ASOBO_AUTOPILOT_Push_FlightDirector_Template
Prev
InteriorDefsNext
Epic2