MSFS SDK Documentation Logo
Flighting
  • SDK Documentation

Aircraft Engine Events

The event IDs listed here are all related to the aircraft engines.

Anti-Ice

Key NameEvent IDParametersDescription
ANTI_ICE_GRADUAL_SETKEY_ANTI_ICE_GRADUAL_SET[0]: Position (0 - 16383)Sets engine anti-ice switch. Controlled engines are set through the SimVar ENGINE CONTROL SELECT.
ANTI_ICE_GRADUAL_SET_ENG1ANTI_ICE_GRADUAL_SET_ENG2ANTI_ICE_GRADUAL_SET_ENG3ANTI_ICE_GRADUAL_SET_ENG4KEY_ANTI_ICE_GRADUAL_SET_ENG1KEY_ANTI_ICE_GRADUAL_SET_ENG2KEY_ANTI_ICE_GRADUAL_SET_ENG3KEY_ANTI_ICE_GRADUAL_SET_ENG4[0]: Position (0 - 16383)Sets the engine 1/2/3/4 anti-ice switch to a value.
ANTI_ICE_ONKEY_ANTI_ICE_ONN/ASets anti-ice switches on. Controlled engines are set through the SimVar ENGINE CONTROL SELECT.
ANTI_ICE_OFFKEY_ANTI_ICE_OFFN/ASets anti-ice switches off. Controlled engines are set through the SimVar ENGINE CONTROL SELECT.
ANTI_ICE_SETKEY_ANTI_ICE_SET[0]: BoolSets anti-ice switches on (1) or off (0). Controlled engines are set through the SimVar ENGINE CONTROL SELECT.
ANTI_ICE_SET_ENG1ANTI_ICE_SET_ENG2ANTI_ICE_SET_ENG3ANTI_ICE_SET_ENG4KEY_ANTI_ICE_SET_ENG1KEY_ANTI_ICE_SET_ENG2KEY_ANTI_ICE_SET_ENG3KEY_ANTI_ICE_SET_ENG4[0]: BoolSets engine 1/2/3/4 anti-ice switch (0,1)
ANTI_ICE_TOGGLEKEY_ANTI_ICE_TOGGLEN/AToggle anti-ice switches.Controlled engines are set through the SimVar ENGINE CONTROL SELECT.
ANTI_ICE_TOGGLE_ENG1ANTI_ICE_TOGGLE_ENG2ANTI_ICE_TOGGLE_ENG3ANTI_ICE_TOGGLE_ENG4KEY_ANTI_ICE_TOGGLE_ENG1KEY_ANTI_ICE_TOGGLE_ENG2KEY_ANTI_ICE_TOGGLE_ENG3KEY_ANTI_ICE_TOGGLE_ENG4N/AToggle engine 1/2/3/4 anti-ice switch on (1) or off (0).

Condition Lever

Key NameEvent IDParametersDescription
AXIS_CONDITION_LEVER_SETKEY_AXIS_CONDITION_LEVER_SET[0]: Index of the engine (starting at 1) or 0 to target all engines.[1]: ValueControl the mixture axis (-100 to 100%). This is simply an alias for the AXIS_MIXTURE_SET key event.
AXIS_CONDITION_LEVER_1_SETAXIS_CONDITION_LEVER_2_SETAXIS_CONDITION_LEVER_3_SETAXIS_CONDITION_LEVER_4_SETKEY_AXIS_CONDITION_LEVER_1_SETKEY_AXIS_CONDITION_LEVER_2_SETKEY_AXIS_CONDITION_LEVER_3_SETKEY_AXIS_CONDITION_LEVER_4_SET[0]: Axis valueSets the condition lever position based on the percentage final value of axis the input where:0% - 33.3% = cutoff33.3% - 66.6% = low idle66.6% - 100% = high
CONDITION_LEVER_CUT_OFFKEY_CONDITION_LEVER_CUT_OFF[0]: Engine indexSets the condition lever for the indexed engine to the cutoff position, which cuts the fuel flow.Not currently used in the simulation.
CONDITION_LEVER_DECKEY_CONDITION_LEVER_DEC[0]: Engine indexDecrements the condition lever position by one for the indexed engine. The possible lever positions are as follows:0 for cutoff1 for low idle2 for high
CONDITION_LEVER_HIGH_IDLEKEY_CONDITION_LEVER_HIGH_IDLE[0]: Engine indexSets the condition lever for the indexed engine to the high position (2).Not currently used in the simulation.
CONDITION_LEVER_INCKEY_CONDITION_LEVER_INC[0]: Engine indexIncrements the condition lever position by one for the indexed engine. The possible lever positions are as follows:0 for cutoff1 for low idle2 for high
CONDITION_LEVER_LOW_IDLEKEY_CONDITION_LEVER_LOW_IDLE[0]: Engine indexSets the condition lever for the indexed engine to the low position (1).Not currently used in the simulation.
CONDITION_LEVER_SETKEY_CONDITION_LEVER_SET[0]: PositionSets the condition lever for the all engines to the given position, which is one of the following:0 for cutoff1 for low idle2 for high
CONDITION_LEVER_1_CUT_OFFCONDITION_LEVER_2_CUT_OFFCONDITION_LEVER_3_CUT_OFFCONDITION_LEVER_4_CUT_OFFKEY_CONDITION_LEVER_1_CUT_OFFKEY_CONDITION_LEVER_2_CUT_OFFKEY_CONDITION_LEVER_3_CUT_OFFKEY_CONDITION_LEVER_4_CUT_OFFN/ASets the condition lever for engine 1/2/3/4 to the cutoff position, which cuts the fuel flow.Not currently used in the simulation.
CONDITION_LEVER_1_DECCONDITION_LEVER_2_DECCONDITION_LEVER_3_DECCONDITION_LEVER_4_DECKEY_CONDITION_LEVER_1_DECKEY_CONDITION_LEVER_2_DECKEY_CONDITION_LEVER_3_DECKEY_CONDITION_LEVER_4_DECN/ADecreases the condition lever position by one for engine 1/2/3/4. The possible lever positions are as follows:0 for cutoff1 for low idle2 for high
CONDITION_LEVER_1_HIGH_IDLECONDITION_LEVER_2_HIGH_IDLECONDITION_LEVER_3_HIGH_IDLECONDITION_LEVER_4_HIGH_IDLEKEY_CONDITION_LEVER_1_HIGH_IDLEKEY_CONDITION_LEVER_2_HIGH_IDLEKEY_CONDITION_LEVER_3_HIGH_IDLEKEY_CONDITION_LEVER_4_HIGH_IDLEN/ASets the condition lever for engine 1/2/3/4 to the high position (2).Not currently used in the simulation.
CONDITION_LEVER_1_INCCONDITION_LEVER_2_INCCONDITION_LEVER_3_INCCONDITION_LEVER_4_INCKEY_CONDITION_LEVER_1_INCKEY_CONDITION_LEVER_2_INCKEY_CONDITION_LEVER_3_INCKEY_CONDITION_LEVER_4_INCN/AIncrements the condition lever position by one for engine 1/2/3/4. The possible lever positions are as follows:0 for cutoff1 for low idle2 for high
CONDITION_LEVER_1_LOW_IDLECONDITION_LEVER_2_LOW_IDLECONDITION_LEVER_3_LOW_IDLECONDITION_LEVER_4_LOW_IDLEKEY_CONDITION_LEVER_1_LOW_IDLEKEY_CONDITION_LEVER_2_LOW_IDLEKEY_CONDITION_LEVER_3_LOW_IDLEKEY_CONDITION_LEVER_4_LOW_IDLEN/ASets the condition lever for engine 1/2/3/4 to the low position (1).Not currently used in the simulation.
CONDITION_LEVER_1_SETCONDITION_LEVER_2_SETCONDITION_LEVER_3_SETCONDITION_LEVER_4_SETKEY_CONDITION_LEVER_1_SETKEY_CONDITION_LEVER_2_SETKEY_CONDITION_LEVER_3_SETKEY_CONDITION_LEVER_4_SET[0]: PositionSets the condition lever for engine 1/2/3/4 to the given position, which is one of the following:0 for cutoff1 for low idle2 for high

Fuel

Key NameEvent IDParametersDescription
AXIS_MIXTURE_SETKEY_AXIS_MIXTURE_SET[0]: Index of the engine (starting at 1) or 0 to target all engines.[1]: ValueControl the mixture axis (-100 to 100%).
AXIS_MIXTURE1_SETAXIS_MIXTURE2_SETAXIS_MIXTURE3_SETAXIS_MIXTURE4_SETKEY_AXIS_MIXTURE1_SETKEY_AXIS_MIXTURE2_SETKEY_AXIS_MIXTURE3_SETKEY_AXIS_MIXTURE4_SET[0]: ValueControl the mixture axis (-100 to 100%).
FUEL_PUMPKEY_FUEL_PUMP[0]: Index of the engine (starting at 1) or 0 to target all engines.Toggle electric fuel pumps
MIXTURE_DECRKEY_MIXTURE_DECR[0]: Index of the engine (starting at 1) or 0 to target all engines.Decrement mixture levers
MIXTURE1_DECRMIXTURE2_DECRMIXTURE3_DECRMIXTURE4_DECRKEY_MIXTURE1_DECRKEY_MIXTURE2_DECRKEY_MIXTURE3_DECRKEY_MIXTURE4_DECRN/ADecrement mixture lever 1/2/3/4
MIXTURE_DECR_SMALLKEY_MIXTURE_DECR_SMALL[0]: Index of the engine (starting at 1) or 0 to target all engines.Decrement mixture levers small
MIXTURE1_DECR_SMALLMIXTURE2_DECR_SMALLMIXTURE3_DECR_SMALLMIXTURE4_DECR_SMALLKEY_MIXTURE1_DECR_SMALLKEY_MIXTURE2_DECR_SMALLKEY_MIXTURE3_DECR_SMALLKEY_MIXTURE4_DECR_SMALLN/ADecrement mixture 1/2/3/4 lever small
MIXTURE_INCRKEY_MIXTURE_INCR[0]: Index of the engine (starting at 1) or 0 to target all engines.Increment mixture levers
MIXTURE1_INCRMIXTURE2_INCRMIXTURE3_INCRMIXTURE4_INCRKEY_MIXTURE1_INCRKEY_MIXTURE2_INCRKEY_MIXTURE3_INCRKEY_MIXTURE4_INCRN/AIncrement mixture lever 1/2/3/4
MIXTURE_INCR_SMALLKEY_MIXTURE_INCR_SMALL[0]: Index of the engine (starting at 1) or 0 to target all engines.Increment mixture levers small
MIXTURE1_INCR_SMALLMIXTURE2_INCR_SMALLMIXTURE3_INCR_SMALLMIXTURE4_INCR_SMALLKEY_MIXTURE1_INCR_SMALLKEY_MIXTURE2_INCR_SMALLKEY_MIXTURE3_INCR_SMALLKEY_MIXTURE4_INCR_SMALLN/AIncrement mixture lever 1/2/3/4 small
MIXTURE_LEANKEY_MIXTURE_LEAN[0]: Index of the engine (starting at 1) or 0 to target all engines.Set mixture levers to max lean
MIXTURE1_LEANMIXTURE2_LEANMIXTURE3_LEANMIXTURE4_LEANKEY_MIXTURE1_LEANKEY_MIXTURE2_LEANKEY_MIXTURE3_LEANKEY_MIXTURE4_LEANN/ASet mixture lever 1/2/3/4 to max lean
MIXTURE_RELATIVE_AXISKEY_MIXTURE_RELATIVE_AXISN/AIncrement or decrement the fuel mixture based on the speed and the distance of the interaction from the user device (values are clamped between 0 to 16384).NOTE: This is primarily for the PS5 controller touch-pad, but should work with any touch-input.
MIXTURE_RICHKEY_MIXTURE_RICH[0]: Index of the engine (starting at 1) or 0 to target all engines.Set mixture levers to max rich
MIXTURE1_RICHMIXTURE2_RICHMIXTURE3_RICHMIXTURE4_RICHKEY_MIXTURE1_RICHKEY_MIXTURE2_RICHKEY_MIXTURE3_RICHKEY_MIXTURE4_RICHN/ASet mixture lever 1/2/3/4 to max rich
MIXTURE_SETKEY_MIXTURE_SET[0]: Index of the engine (starting at 1) or 0 to target all engines.[1]: ValueEngine mixture set.
MIXTURE_SET_BESTKEY_MIXTURE_SET_BEST[0]: Index of the engine (starting at 1) or 0 to target all engines.Set mixture levers to current best power setting.
MIXTURE1_SETMIXTURE2_SETMIXTURE3_SETMIXTURE4_SETKEY_MIXTURE1_SETKEY_MIXTURE2_SETKEY_MIXTURE3_SETKEY_MIXTURE4_SET[0]: ValueSet engine 1/2/3/4 mixture.
SET_FUEL_VALVE_ENG1SET_FUEL_VALVE_ENG2SET_FUEL_VALVE_ENG3SET_FUEL_VALVE_ENG4KEY_SET_FUEL_VALVE_ENG1KEY_SET_FUEL_VALVE_ENG2KEY_SET_FUEL_VALVE_ENG3KEY_SET_FUEL_VALVE_ENG4[0]: ValueSet engine 1/2/3/4 fuel valve.
SHUTOFF_VALVE_TOGGLEKEY_SHUTOFF_VALVE_TOGGLE[0]: Index of the engine (starting at 1) or 0 to target all engines.Toggle the status of the fuel shutoff valve (used on piston engine to enable/disable fuel arrival).
SHUTOFF_VALVE_ONKEY_SHUTOFF_VALVE_ON[0]: Index of the engine (starting at 1) or 0 to target all engines.Turns on the fuel shutoff valve (used on piston engines to enable fuel arrival).
SHUTOFF_VALVE_OFFKEY_SHUTOFF_VALVE_OFF[0]: Index of the engine (starting at 1) or 0 to target all engines.Turns off the fuel shutoff valve (used on piston engines to disable fuel arrival).
TOGGLE_ELECT_FUEL_PUMPKEY_TOGGLE_ELECT_FUEL_PUMP[0]: Index of the engine (starting at 1) or 0 to target all engines.Toggle electric fuel pumps
TOGGLE_ELECT_FUEL_PUMP1TOGGLE_ELECT_FUEL_PUMP2TOGGLE_ELECT_FUEL_PUMP3TOGGLE_ELECT_FUEL_PUMP4KEY_TOGGLE_ELECT_FUEL_PUMP1KEY_TOGGLE_ELECT_FUEL_PUMP2KEY_TOGGLE_ELECT_FUEL_PUMP3KEY_TOGGLE_ELECT_FUEL_PUMP4N/AToggle engine 1/2/3/4 electric fuel pump
TOGGLE_FUEL_VALVE_ALLKEY_TOGGLE_FUEL_VALVE_ALLN/AToggle engine fuel valves
TOGGLE_FUEL_VALVE_ENG1TOGGLE_FUEL_VALVE_ENG2TOGGLE_FUEL_VALVE_ENG3TOGGLE_FUEL_VALVE_ENG4KEY_TOGGLE_FUEL_VALVE_ENG1KEY_TOGGLE_FUEL_VALVE_ENG2KEY_TOGGLE_FUEL_VALVE_ENG3KEY_TOGGLE_FUEL_VALVE_ENG4N/AToggle engine 1/2/3/4 fuel valve

Magneto

Key NameEvent IDParametersDescription
MAGNETOKEY_MAGNETO[0]: Magneto indexSelects magnetos (for +/- sequence)
MAGNETO_BOTHKEY_MAGNETO_BOTH[0]: Magneto indexSet indexed engine magnetos on
MAGNETO1_BOTHMAGNETO2_BOTHMAGNETO3_BOTHMAGNETO4_BOTHKEY_MAGNETO1_BOTHKEY_MAGNETO2_BOTHKEY_MAGNETO3_BOTHKEY_MAGNETO4_BOTHN/ASet engine 1/2/3/4 magnetos on
MAGNETO_DECRKEY_KEY_MAGNETO_DECRN/ADecrease all magneto switches positions
MAGNETO1_DECRMAGNETO2_DECRMAGNETO3_DECRMAGNETO4_DECRKEY_MAGNETO1_DECRKEY_MAGNETO2_DECRKEY_MAGNETO3_DECRKEY_MAGNETO4_DECRN/ADecrease engine 1/2/3/4 magneto switch position
MAGNETO_INCRKEY_KEY_MAGNETO_INCRN/AIncrease all magneto switches positions
MAGNETO1_INCRMAGNETO2_INCRMAGNETO3_INCRMAGNETO4_INCRKEY_MAGNETO1_INCRKEY_MAGNETO2_INCRKEY_MAGNETO3_INCRKEY_MAGNETO4_INCRN/AIncrease engine 1/2/3/4 magneto switch position
MAGNETO_LEFTKEY_MAGNETO_LEFTN/AToggle all engine left magnetos
MAGNETO1_LEFTMAGNETO2_LEFTMAGNETO3_LEFTMAGNETO4_LEFTKEY_MAGNETO1_LEFTKEY_MAGNETO2_LEFTKEY_MAGNETO3_LEFTKEY_MAGNETO4_LEFTN/AToggle engine 1/2/3/4 left magneto
MAGNETO_OFFKEY_MAGNETO_OFFN/ASet all engine magnetos off
MAGNETO1_OFFMAGNETO2_OFFMAGNETO3_OFFMAGNETO4_OFFKEY_MAGNETO1_OFFKEY_MAGNETO2_OFFKEY_MAGNETO3_OFFKEY_MAGNETO4_OFFN/ASet engine 1/2/3/4 magnetos off
MAGNETO_RIGHTKEY_MAGNETO_RIGHTN/AToggle all engine right magnetos
MAGNETO1_RIGHTMAGNETO2_RIGHTMAGNETO3_RIGHTMAGNETO4_RIGHTKEY_MAGNETO1_RIGHTKEY_MAGNETO2_RIGHTKEY_MAGNETO3_RIGHTKEY_MAGNETO4_RIGHTN/AToggle engine 1/2/3/4 right magneto
MAGNETO_SETKEY_STARTER_SET[0]: BoolSet the status of the current controlled engine starters to On/Off. Controlled engines are set through the SimVar ENGINE CONTROL SELECT.
MAGNETO1_SETMAGNETO2_SETMAGNETO3_SETMAGNETO4_SETKEY_MAGNETO1_SETKEY_MAGNETO2_SETKEY_MAGNETO3_SETKEY_MAGNETO4_SETN/ASet engine 1/2/3/4 magneto switchNot currently used in the simulation.
MAGNETO_STARTKEY_MAGNETO_STARTN/ASet all engine magnetos on and toggle starters
MAGNETO1_STARTMAGNETO2_STARTMAGNETO3_STARTMAGNETO4_STARTKEY_MAGNETO1_STARTKEY_MAGNETO2_STARTKEY_MAGNETO3_STARTKEY_MAGNETO4_STARTN/ASet engine 1/2/3/4 magnetos on and toggle starter

General Engine

Key NameEvent IDParametersDescription
AXIS_THRUST_VECTOR_HORIZONTAL_SETKEY_AXIS_THRUST_VECTOR_HORIZONTAL_SET[0]: Index of the engine (starting at 1) or 0 to target all engines.[1]: Value to set between 0-16KThis can be used to set the horizontal (pitch) thrust vector for the indexed engine (or all engines). The value given should be between 0 and 16383, where 0 corresponds to the value given for the TiltMinAngles.N paramater and 16383 corresponds to the TiltMaxAngles.N parameter, with the final value being a mapping between the two. Any value above or below the min or max values will be clamped to within the appropriate range.
AXIS_THRUST_VECTOR_VERTICAL_SETKEY_AXIS_THRUST_VECTOR_VERTICAL_SET[0]: Index of the engine (starting at 1) or 0 to target all engines.[1]: Value to set between 0-16KThis can be used to set the vertical (yaw) thrust vector for the indexed engine (or all engines). The value given should be between 0 and 16383, where 0 corresponds to the value given for the TiltMinAngles.N paramater and 16383 corresponds to the TiltMaxAngles.N parameter, with the final value being a mapping between the two. Any value above or below the min or max values will be clamped to within the appropriate range.
ENGINEKEY_ENGINEN/ASets engines for 1,2,3,4 selection (to be followed by SELECT_n)
ENGINE_AUTO_STARTKEY_ENGINE_AUTO_STARTN/ATriggers auto-start
ENGINE_AUTO_SHUTDOWNKEY_ENGINE_AUTO_SHUTDOWNN/ATriggers auto-shutdown
ENGINE_BLEED_AIR_SOURCE_SETKEY_ENGINE_BLEED_AIR_SOURCE_SET[0]: Engine Index[1]: BoolThis is used to set the given engine bleed air to active (1) or not (0).
ENGINE_BLEED_AIR_SOURCE_TOGGLEKEY_ENGINE_BLEED_AIR_SOURCE_TOGGLE[0]: Engine IndexToggles the indexed engine bleed air between active (1) and inactive (0). Note that if you supply 0 instead of a single engine index, then the event will target all engines.
ENGINE_MASTER_SETKEY_ENGINE_MASTER_SET[0]: Engine IndexSet the indexed engine as the master engine (1), or not (0).
ENGINE_MASTER_1_SETENGINE_MASTER_2_SETENGINE_MASTER_3_SETENGINE_MASTER_4_SETKEY_ENGINE_MASTER_1_SETKEY_ENGINE_MASTER_2_SETKEY_ENGINE_MASTER_3_SETKEY_ENGINE_MASTER_4_SETN/ASet the numbered engine as the master engine (1), or not (0).
ENGINE_MASTER_TOGGLEKEY_ENGINE_MASTER_TOGGLE[0]: Engine IndexToogle the indexed engine between being the master engine (1), or not (0).
ENGINE_MASTER_1_TOGGLEENGINE_MASTER_2_TOGGLEENGINE_MASTER_3_TOGGLEENGINE_MASTER_4_TOGGLEKEY_ENGINE_MASTER_1_TOGGLEKEY_ENGINE_MASTER_2_TOGGLEKEY_ENGINE_MASTER_3_TOGGLEKEY_ENGINE_MASTER_4_TOGGLEN/AToogle the numbered engine between being the master engine (1), or not (0).
ENGINE_MODE_CRANK_SETKEY_ENGINE_MODE_CRANK_SETN/ASet the engine mode on CRANK.
ENGINE_MODE_NORM_SETKEY_ENGINE_MODE_NORM_SETN/ASet the engine mode on NORM.
ENGINE_MODE_IGN_STARTKEY_ENGINE_MODE_IGN_STARTN/ASet the engine mode on IGN/ START.
ENGINE_PRIMERKEY_ENGINE_PRIMERN/ATrigger engine primers
THRUST_VECTOR_HORIZONTAL_DECREASEKEY_THRUST_VECTOR_HORIZONTAL_DECREASE[0]: Index of the engine (starting at 1) or 0 to target all engines.This can be used to decrease the indexed engine (or all engines) horizontal (pitch) thrust vector by 1% of the total range as defined by the TiltMinAngles.N and TiltMaxAngles.N parameters.
THRUST_VECTOR_HORIZONTAL_INCREASEKEY_THRUST_VECTOR_HORIZONTAL_INCREASE[0]: Index of the engine (starting at 1) or 0 to target all engines.This can be used to increase the indexed engine (or all engines) horizontal (pitch) thrust vector by 1% of the total range as defined by the TiltMinAngles.N and TiltMaxAngles.N parameters.
THRUST_VECTOR_VERTICAL_DECREASEKEY_THRUST_VECTOR_VERTICAL_DECREASE[0]: Index of the engine (starting at 1) or 0 to target all engines.This can be used to decrease the indexed engine (or all engines) vertical (yaw) thrust vector by 1% of the total range as defined by the TiltMinAngles.N and TiltMaxAngles.N parameters.
THRUST_VECTOR_VERTICAL_INCREASEKEY_THRUST_VECTOR_VERTICAL_INCREASE[0]: Index of the engine (starting at 1) or 0 to target all engines.This can be used to increase the indexed engine (or all engines) vertical (yaw) thrust vector by 1% of the total range as defined by the TiltMinAngles.N and TiltMaxAngles.N parameters.

Miscellaneous

Key NameEvent IDParametersDescription
COWLFLAP1_SETCOWLFLAP2_SETCOWLFLAP3_SETCOWLFLAP4_SETKEY_COWLFLAP1_SETKEY_COWLFLAP2_SETKEY_COWLFLAP3_SETKEY_COWLFLAP4_SET[0]: position from 0 to 16983Sets engine 1/2/3/4 cowl flap lever position (0 to 16383)
DEC_COWL_FLAPSKEY_DEC_COWL_FLAPSN/ADecrement all cowl flap levers by 0.078.
DEC_COWL_FLAPS1DEC_COWL_FLAPS2DEC_COWL_FLAPS3DEC_COWL_FLAPS4KEY_DEC_COWL_FLAPS1KEY_DEC_COWL_FLAPS2KEY_DEC_COWL_FLAPS3KEY_DEC_COWL_FLAPS4N/ADecrement engine 1/2/3/4 cowl flap lever by 0.078.
INC_COWL_FLAPSKEY_INC_COWL_FLAPSN/AIncrement cowl flap levers by 0.078.
INC_COWL_FLAPS1INC_COWL_FLAPS2INC_COWL_FLAPS3INC_COWL_FLAPS4KEY_INC_COWL_FLAPS1KEY_INC_COWL_FLAPS2KEY_INC_COWL_FLAPS3KEY_INC_COWL_FLAPS4N/AIncrement engine 1/2/3/4 cowl flap lever
OIL_COOLING_FLAPS_DOWNKEY_OIL_COOLING_FLAPS_DOWNN/ASet the oil cooling flaps to the down position (1).
OIL_COOLING_FLAPS_SETKEY_OIL_COOLING_FLAPS_SET[0]: positionSet the oil cooling flaps to either the up position (0) or the down position (1).
OIL_COOLING_FLAPS_TOGGLEKEY_OIL_COOLING_FLAPS_TOGGLEN/AToggle the oil cooling flaps between the up position (0) and the down position (1).
OIL_COOLING_FLAPS_UPKEY_OIL_COOLING_FLAPS_UPN/ASet the oil cooling flaps to the up position (0).
PLASMA_OFFKEY_PLASMA_OFFN/ADisables the plasma effect for Engine 1.
PLASMA_ONKEY_PLASMA_ONN/AEnables the plasma effect for Engine 1.
PLASMA_TOGGLEKEY_PLASMA_TOGGLEN/AToggles the plasma effect on / off for Engine 1.
PLASMA_SETKEY_PLASMA_SET[0]: booleanSets the plasma effect for Engine 1 to either on (1) or off (0).
RADIATOR_COOLING_FLAPS_DOWNKEY_RADIATOR_COOLING_FLAPS_DOWNN/ASet the radiator cooling flaps to the down position (1).
RADIATOR_COOLING_FLAPS_SETKEY_RADIATOR_COOLING_FLAPS_SETSet the radiator cooling flaps to either the up position (0) or the down position (1).
RADIATOR_COOLING_FLAPS_TOGGLEKEY_RADIATOR_COOLING_FLAPS_TOGGLEN/AToggle the radiator cooling flaps between the up position (0) and the down position (1).
RADIATOR_COOLING_FLAPS_UPKEY_RADIATOR_COOLING_FLAPS_UPN/ASet the radiator cooling flaps to the up position (0).
TOGGLE_MASTER_IGNITION_SWITCHKEY_TOGGLE_MASTER_IGNITION_SWITCHN/AToggles master ignition switch
TOGGLE_PRIMERKEY_TOGGLE_PRIMER[0]: Index of the engine (starting at 1) or 0 to target all engines.Toogle the engine primers on (1) or off (0)
TOGGLE_PRIMER1TOGGLE_PRIMER2TOGGLE_PRIMER3TOGGLE_PRIMER4KEY_TOGGLE_PRIMER1KEY_TOGGLE_PRIMER2KEY_TOGGLE_PRIMER3KEY_TOGGLE_PRIMER4N/ATrigger the engine 1/2/3/4 primer on (1) or off (0).
TOGGLE_AFTERBURNERKEY_TOGGLE_AFTERBURNER[0]: Index of the engine (starting at 1) or 0 to target all engines.Toggles afterburners on (1) or off (0).
TOGGLE_AFTERBURNER1TOGGLE_AFTERBURNER2TOGGLE_AFTERBURNER3TOGGLE_AFTERBURNER4KEY_TOGGLE_AFTERBURNER1KEY_TOGGLE_AFTERBURNER2KEY_TOGGLE_AFTERBURNER3KEY_TOGGLE_AFTERBURNER4N/AToggles engine 1/2/3/4 afterburner on (1) or off (0).

Propeller

Key NameEvent IDParametersDescription
AXIS_PROPELLER_SETKEY_AXIS_PROPELLER_SET[0]: Index of the engine (starting at 1) or 0 to target all engines.[1]: pitch from 0 (-100%) to 16983 (+100%)Set propeller pitch for indexed engine to the exact value (-16383 to +16383).
AXIS_PROPELLER1_SETAXIS_PROPELLER2_SETAXIS_PROPELLER3_SETAXIS_PROPELLER4_SETKEY_AXIS_PROPELLER1_SETKEY_AXIS_PROPELLER2_SETKEY_AXIS_PROPELLER3_SETKEY_AXIS_PROPELLER4_SET[0]: pitch from 0 (-100%) to 16983 (+100%)Set propeller pitch for engine 1/2/3/4 exact value (-16383 to +16383)
PROP_FORCE_BETA_OFFKEY_PROP_FORCE_BETA_OFF[0]: The engine index to target (from 1 to 16, or 0 for all engines)This key allows you to disable the propeller Force Beta mode, in which case the internal coded simulation logic to drive the beta is used instead of the value from PROP BETA FORCED POSITION.
PROP_FORCE_BETA_ONKEY_PROP_FORCE_BETA_ON[0]: The engine index to target (from 1 to 16, or 0 for all engines)This keys allows you to enable the propeller Force Beta mode, in which case the sim logic to drive the beta is ignored and instead the value from PROP BETA FORCED POSITION is used.
PROP_FORCE_BETA_SETKEY_PROP_FORCE_BETA_SET[0]: The engine index to target (from 1 to 16, or 0 for all engines)[1]: Whether or not to force the prop beta (Boolean).This key allows you to set the propeller to be in Force Beta mode, in which case the internal coded simulation logic that normally drives the beta is ignored and instead the value from PROP BETA FORCED POSITION is used.
PROP_FORCE_BETA_TOGGLEKEY_PROP_FORCE_BETA_TOGGLE[0]: The engine index to target (from 1 to 16, or 0 for all engines)This key allows you to toggle between the normal and Force Beta mode. If enabled, the Force Beta mode will prevent the internal coded simulation logic from driving the beta and instead allow you to control it with the value from PROP BETA FORCED POSITION.
PROP_FORCE_BETA_VALUE_SETKEY_PROP_FORCE_BETA_VALUE_SET[0]: The engine index to target (from 1 to 16, or 0 for all engines)[1]: The angle that the prop should be forced to. This is stored as the 16k representation of an angle between -180 degrees and + 180 degreesThis key allows you to set the value that the prop will attempt to reach when in Forced Beta mode (this will have the same effect as setting the PROP BETA FORCED POSITION SimVar).
PROP_LOCK_OFFKEY_PROP_LOCK_OFF[0]: Index of the engine (starting at 1) or 0 to target all engines.Unlocks the propeller lock.
PROP_LOCK_ONKEY_PROP_LOCK_ON[0]: Index of the engine (starting at 1) or 0 to target all engines.Locks the propeller, but only if the propeller is already running below 5% RPM.
PROP_LOCK_SETKEY_PROP_LOCK_SET[0]: Index of the engine (starting at 1) or 0 to target all engines.[0]: True/False (1, 0)Sets the propeller to be either locked (1) or unlocked (0). Note that you can only lock the propeller if it is already running below 5% RPM.
PROP_LOCK_TOGGLEKEY_PROP_LOCK_TOGGLE[0]: Index of the engine (starting at 1) or 0 to target all engines.Toggles the propeller pitch lever between locked (1) and unlocked (0). Note that you can only lock the propeller if it is already running below 5% RPM.
PROP_PITCH_AXIS_SET_EX1KEY_PROP_PITCH_AXIS_SET_EX1[0]: Index of the engine (starting at 1) or 0 to target all engines.[1]: pitch from 0 (-100%) to 16983 (+100%)Set propeller pitch for indexed engine, taking into account the reverser status, ie: When in reverse and setting to 100% the lever position will be sent back toward minimum position of -100%.
PROP_PITCH1_AXIS_SET_EX1PROP_PITCH2_AXIS_SET_EX1PROP_PITCH3_AXIS_SET_EX1PROP_PITCH4_AXIS_SET_EX1KEY_PROP_PITCH1_AXIS_SET_EX1KEY_PROP_PITCH2_AXIS_SET_EX1KEY_PROP_PITCH3_AXIS_SET_EX1KEY_PROP_PITCH4_AXIS_SET_EX1[0]: pitch from 0 (-100%) to 16983 (+100%)Set propeller pitch for engine 1/2/3/4, taking into account the reverser status, ie: When in reverse and setting to 100% the lever position will be sent back toward minimum position of -100%.
PROP_PITCH_DECRKEY_PROP_PITCH_DECR[0]: The engine index to target (from 1 to 16, or 0 for all engines)Decrement prop pitch levers
PROP_PITCH1_DECRPROP_PITCH2_DECRPROP_PITCH3_DECRPROP_PITCH4_DECRKEY_PROP_PITCH1_DECRKEY_PROP_PITCH2_DECRKEY_PROP_PITCH3_DECRKEY_PROP_PITCH4_DECRN/ADecrement prop pitch lever 1/2/3/4
PROP_PITCH_DECR_SMALLKEY_PROP_PITCH_DECR_SMALLN/ADecrease prop levers small
PROP_PITCH1_DECR_SMALLPROP_PITCH2_DECR_SMALLPROP_PITCH3_DECR_SMALLPROP_PITCH4_DECR_SMALLKEY_PROP_PITCH1_DECR_SMALLKEY_PROP_PITCH2_DECR_SMALLKEY_PROP_PITCH3_DECR_SMALLKEY_PROP_PITCH4_DECR_SMALLN/ADecrease prop lever 1/2/3/4 small
PROP_PITCH_DECREASE_EX1KEY_PROP_PITCH_DECREASE_EX1[0]: The engine index to target (from 1 to 16, or 0 for all engines)Decrease the propeller pitch for the indexed engine, taking into account the reverser status, ie: When in reverse a decrease event will actually increase the lever position bringing it toward the minimum reverse position.
PROP_PITCH1_DECREASE_EX1PROP_PITCH2_DECREASE_EX1PROP_PITCH3_DECREASE_EX1PROP_PITCH4_DECREASE_EX1KEY_PROP_PITCH1_DECREASE_EX1KEY_PROP_PITCH2_DECREASE_EX1KEY_PROP_PITCH3_DECREASE_EX1KEY_PROP_PITCH4_DECREASE_EX1N/ADecrease the propeller pitch for engine 1/2/3/4, taking into account the reverser status, ie: When in reverse a decrease event will actually increase the lever position bringing it toward the minimum reverse position.
PROP_PITCH_DECREASE_SMALL_EX1KEY_PROP_PITCH_DECREASE_SMALL_EX1[0]: The engine index to target (from 1 to 16, or 0 for all engines)Decrease the propeller pitch for the indexed engine by half the amount of the normal decrease event, taking into account the reverser status, ie: When in reverse a decrease event will actually increase the lever position bringing it toward the minimum reverse position.
PROP_PITCH1_DECREASE_SMALL_EX1PROP_PITCH2_DECREASE_SMALL_EX1PROP_PITCH3_DECREASE_SMALL_EX1PROP_PITCH4_DECREASE_SMALL_EX1KEY_PROP_PITCH1_DECREASE_SMALL_EX1KEY_PROP_PITCH2_DECREASE_SMALL_EX1KEY_PROP_PITCH3_DECREASE_SMALL_EX1KEY_PROP_PITCH4_DECREASE_SMALL_EX1N/ADecrease the propeller pitch for engine 1/2/3/4 by half the amount of the normal decrease event, taking into account the reverser status, ie: When in reverse a decrease event will actually increase the lever position bringing it toward the minimum reverse position.
PROP_PITCH_HIKEY_PROP_PITCH_HI[0]: The engine index to target (from 1 to 16, or 0 for all engines)Set prop pitch levers min (hi pitch)
PROP_PITCH1_HIPROP_PITCH2_HIPROP_PITCH3_HIPROP_PITCH4_HIKEY_PROP_PITCH1_HIKEY_PROP_PITCH2_HIKEY_PROP_PITCH3_HIKEY_PROP_PITCH4_HIN/ASet prop pitch lever 1/2/3/4 min (hi pitch)
PROP_PITCH_HI_EX1KEY_PROP_PITCH_HI_EX1[0]: The engine index to target (from 1 to 16, or 0 for all engines)Set prop pitch levers min (hi pitch)
PROP_PITCH1_HI_EX1PROP_PITCH2_HI_EX1PROP_PITCH3_HI_EX1PROP_PITCH4_HI_EX1KEY_PROP_PITCH1_HI_EX1KEY_PROP_PITCH2_HI_EX1KEY_PROP_PITCH3_HI_EX1KEY_PROP_PITCH4_HI_EX1N/ASet prop pitch lever 1/2/3/4 min (hi pitch)
PROP_PITCH_INCRKEY_PROP_PITCH_INCR[0]: The engine index to target (from 1 to 16, or 0 for all engines)Increment prop pitch levers
PROP_PITCH1_INCRPROP_PITCH2_INCRPROP_PITCH3_INCRPROP_PITCH4_INCRKEY_PROP_PITCH1_INCRKEY_PROP_PITCH2_INCRKEY_PROP_PITCH3_INCRKEY_PROP_PITCH4_INCRN/AIncrement prop pitch lever 1/2/3/4
PROP_PITCH_INCR_SMALLKEY_PROP_PITCH_INCR_SMALL[0]: The engine index to target (from 1 to 16, or 0 for all engines)Increment prop pitch levers small
PROP_PITCH1_INCR_SMALLPROP_PITCH2_INCR_SMALLPROP_PITCH3_INCR_SMALLPROP_PITCH4_INCR_SMALLKEY_PROP_PITCH1_INCR_SMALLKEY_PROP_PITCH2_INCR_SMALLKEY_PROP_PITCH3_INCR_SMALLKEY_PROP_PITCH4_INCR_SMALLN/AIncrement prop pitch lever 1/2/3/4 small
PROP_PITCH_INCREASE_EX1KEY_PROP_PITCH_INCREASE_EX1[0]: The engine index to target (from 1 to 16, or 0 for all engines)Increase the propeller pitch for the indexed engine, taking into account the reverser status, ie: When in reverse an increase event will actually decrease the lever position bringing it toward the maximum reverse position.
PROP_PITCH1_INCREASE_EX1PROP_PITCH2_INCREASE_EX1PROP_PITCH3_INCREASE_EX1PROP_PITCH4_INCREASE_EX1KEY_PROP_PITCH1_INCREASE_EX1KEY_PROP_PITCH2_INCREASE_EX1KEY_PROP_PITCH3_INCREASE_EX1KEY_PROP_PITCH4_INCREASE_EX1N/AIncrease the propeller pitch for engine 1/2/3/4, taking into account the reverser status, ie: When in reverse an increase event will actually decrease the lever position bringing it toward the maximum reverse position.
PROP_PITCH_INCREASE_SMALL_EX1KEY_PROP_PITCH_INCREASE_SMALL_EX1[0]: The engine index to target (from 1 to 16, or 0 for all engines)Increase the propeller pitch for the indexed engine by half the amount of the normal increase event, taking into account the reverser status, ie: When in reverse an increase event will actually decrease the lever position bringing it toward the maximum reverse position.
PROP_PITCH1_INCREASE_SMALL_EX1PROP_PITCH2_INCREASE_SMALL_EX1PROP_PITCH3_INCREASE_SMALL_EX1PROP_PITCH4_INCREASE_SMALL_EX1KEY_PROP_PITCH1_INCREASE_SMALL_EX1KEY_PROP_PITCH2_INCREASE_SMALL_EX1KEY_PROP_PITCH3_INCREASE_SMALL_EX1KEY_PROP_PITCH4_INCREASE_SMALL_EX1N/AIncrease the propeller pitch for engine 1/2/3/4 by half the amount of the normal increase event, taking into account the reverser status, ie: When in reverse an increase event will actually decrease the lever position bringing it toward the maximum reverse position.
PROP_PITCH_LOKEY_PROP_PITCH_LO[0]: The engine index to target (from 1 to 16, or 0 for all engines)Set prop pitch levers max (lo pitch)
PROP_PITCH1_LOPROP_PITCH2_LOPROP_PITCH3_LOPROP_PITCH4_LOKEY_PROP_PITCH1_LOKEY_PROP_PITCH2_LOKEY_PROP_PITCH3_LOKEY_PROP_PITCH4_LON/ASet prop pitch lever 1/2/3/4 max (lo pitch)
PROP_PITCH_LO_EX1KEY_PROP_PITCH_LO_EX1[0]: The engine index to target (from 1 to 16, or 0 for all engines)Set prop pitch levers max (lo pitch)
PROP_PITCH1_LO_EX1PROP_PITCH2_LO_EX1PROP_PITCH3_LO_EX1PROP_PITCH4_LO_EX1KEY_PROP_PITCH1_LO_EX1KEY_PROP_PITCH2_LO_EX1KEY_PROP_PITCH3_LO_EX1KEY_PROP_PITCH4_LO_EX1N/ASet prop pitch lever 1/2/3/4 max (lo pitch)
PROP_PITCH_SETKEY_PROP_PITCH_SET[0]: The engine index to target (from 1 to 16, or 0 for all engines)Set prop pitch levers (0 to 16383)
PROP_PITCH1_SETPROP_PITCH2_SETPROP_PITCH3_SETPROP_PITCH4_SETKEY_PROP_PITCH1_SETKEY_PROP_PITCH2_SETKEY_PROP_PITCH3_SETKEY_PROP_PITCH4_SETN/ASet prop pitch lever 1/2/3/4 exact value (0 to 16383)
TOGGLE_PROPELLER_SYNCKEY_TOGGLE_PROP_SYNCN/ATurns propeller synchronization switch on
PROPELLER_RELATIVE_AXISKEY_PROPELLER_RELATIVE_AXISN/AIncrement or decrement the propeller pitch based on the speed and the distance of the interaction from the user device (values are clamped between 0 to 16384).NOTE: This is primarily for the PS5 controller touch-pad, but should work with any touch-input.
PROPELLER_REVERSE_THRUST_TOGGLEKEY_PROPELLER_REVERSE_THRUST_TOGGLEN/AToggle the propeller reverser thrust between on (1) and off (0).
PROPELLER_REVERSE_THRUST_HOLDKEY_PROPELLER_REVERSE_THRUST_HOLDN/AActivate propeller reverse thrust.
TOGGLE_AUTOFEATHER_ARMKEY_TOGGLE_ARM_AUTOFEATHERN/ATurns auto-feather arming switch on.
TOGGLE_FEATHER_SWITCHESKEY_TOGGLE_FEATHER_SWITCHES[0]: The engine index to target (from 1 to 16, or 0 for all engines)Trigger propeller feather switches for the indexed engine.
TOGGLE_FEATHER_SWITCH_1TOGGLE_FEATHER_SWITCH_2TOGGLE_FEATHER_SWITCH_3TOGGLE_FEATHER_SWITCH_4KEY_TOGGLE_FEATHER_SWITCH_1KEY_TOGGLE_FEATHER_SWITCH_2KEY_TOGGLE_FEATHER_SWITCH_3KEY_TOGGLE_FEATHER_SWITCH_4N/ATrigger propeller 1/2/3/4 switch.
TOGGLE_PROPELLER_DEICEKEY_TOGGLE_PROPELLER_DEICEN/AToggles propeller deice switch for all engines.

Throttle

Key NameEvent IDParametersDescription
AXIS_THROTTLE_MINUSKEY_AXIS_THROTTLE_MINUS[0]: the value between 0 - 16383Subtracts the given value from the throttle of all engines (the final position will depend on the min_throttle_limit value).
AXIS_THROTTLE_PLUSKEY_AXIS_THROTTLE_PLUS[0]: the value between 0 - 16383Adds the given value to the throttle of all engines.
AXIS_THROTTLE_SETKEY_AXIS_THROTTLE_SET[0]: The engine index to target (from 1 to 16, or 0 for all engines)[1]: the value between 0 - 16383Set the throttle on the indexed engine.
AXIS_THROTTLE1_SETAXIS_THROTTLE2_SETAXIS_THROTTLE3_SETAXIS_THROTTLE4_SETKEY_AXIS_THROTTLE1_SETKEY_AXIS_THROTTLE2_SETKEY_AXIS_THROTTLE3_SETKEY_AXIS_THROTTLE4_SET[0]: the value between 0 - 16383Set throttle 1/2/3/4 exactly (0 - 16383)
DECREASE_THROTTLEKEY_DECREASE_THROTTLEN/ADecrement throttles
INCREASE_THROTTLEKEY_INCREASE_THROTTLEN/AIncrement throttles
SET_REVERSE_THRUST_OFFKEY_SET_THROTTLE_REVERSE_THRUST_OFF[0]: The engine index to target (from 1 to 16, or 0 for all engines)Turn off throttle reverse thrust for the indexed engine.
SET_REVERSE_THRUST_ONKEY_SET_THROTTLE_REVERSE_THRUST_ON[0]: The engine index to target (from 1 to 16, or 0 for all engines)Turn on throttle reverse thrust for the indexed engine.
SET_THROTTLE1_REVERSE_THRUST_OFFSET_THROTTLE2_REVERSE_THRUST_OFFSET_THROTTLE3_REVERSE_THRUST_OFFSET_THROTTLE4_REVERSE_THRUST_OFFKEY_SET_THROTTLE1_REVERSE_THRUST_OFFKEY_SET_THROTTLE2_REVERSE_THRUST_OFFKEY_SET_THROTTLE3_REVERSE_THRUST_OFFKEY_SET_THROTTLE4_REVERSE_THRUST_OFFN/ATurn off the throttle reverse thrust for engine 1/2/3/4.
SET_THROTTLE1_REVERSE_THRUST_ONSET_THROTTLE2_REVERSE_THRUST_ONSET_THROTTLE3_REVERSE_THRUST_ONSET_THROTTLE4_REVERSE_THRUST_ONKEY_SET_THROTTLE1_REVERSE_THRUST_ONKEY_SET_THROTTLE2_REVERSE_THRUST_ONKEY_SET_THROTTLE3_REVERSE_THRUST_ONKEY_SET_THROTTLE4_REVERSE_THRUST_ONN/ATurn on the throttle reverse thrust for engine 1/2/3/4.
THROTTLE_10KEY_THROTTLE_10N/ASet throttles to 10%
THROTTLE_20KEY_THROTTLE_20N/ASet throttles to 20%
THROTTLE_30KEY_THROTTLE_30N/ASet throttles to 30%
THROTTLE_40KEY_THROTTLE_40N/ASet throttles to 40%
THROTTLE_50KEY_THROTTLE_50N/ASet throttles to 50%
THROTTLE_60KEY_THROTTLE_60N/ASet throttles to 60%
THROTTLE_70KEY_THROTTLE_70N/ASet throttles to 70%
THROTTLE_80KEY_THROTTLE_80N/ASet throttles to 80%
THROTTLE_90KEY_THROTTLE_90N/ASet throttles to 90%
THROTTLE_AXIS_SET_EX1KEY_THROTTLE_AXIS_SET_EX1[0]: Index of the engine (starting at 1) or 0 to target all engines.[1]: throttle from 0 to 16983Set throttle value for the indexed engine, taking into account the reverser status, ie: When in reverse and setting to 100% the throttle position will be sent back toward minimum position of 0%.
THROTTLE1_AXIS_SET_EX1THROTTLE2_AXIS_SET_EX1THROTTLE3_AXIS_SET_EX1THROTTLE4_AXIS_SET_EX1KEY_THROTTLE1_AXIS_SET_EX1KEY_THROTTLE2_AXIS_SET_EX1KEY_THROTTLE3_AXIS_SET_EX1KEY_THROTTLE4_AXIS_SET_EX1[0]: throttle from 0 to 16983Set throttle value for engine 1/2/3/4, taking into account the reverser status, ie: When in reverse and setting to 100% the throttle position will be sent back toward minimum position of 0%.
THROTTLE_CUTKEY_THROTTLE_CUTN/ASet throttles to idle
THROTTLE1_CUTTHROTTLE2_CUTTHROTTLE3_CUTTHROTTLE4_CUTKEY_THROTTLE1_CUTKEY_THROTTLE2_CUTKEY_THROTTLE3_CUTKEY_THROTTLE4_CUTN/ASet throttle 1/2/3/4 to idle
THROTTLE_CUT_EX1KEY_THROTTLE_CUT_EX1N/ASet throttles to idle
THROTTLE1_CUT_EX1THROTTLE2_CUT_EX1THROTTLE3_CUT_EX1THROTTLE4_CUT_EX1KEY_THROTTLE1_CUT_EX1KEY_THROTTLE2_CUT_EX1KEY_THROTTLE3_CUT_EX1KEY_THROTTLE4_CUT_EX1N/ASet throttle 1/2/3/4 to idle
THROTTLE_DECRKEY_THROTTLE_DECRN/ADecrement throttles by 10%.
THROTTLE1_DECRTHROTTLE2_DECRTHROTTLE3_DECRTHROTTLE4_DECRKEY_THROTTLE1_DECRKEY_THROTTLE2_DECRKEY_THROTTLE3_DECRKEY_THROTTLE4_DECRN/ADecrement throttle 1/2/3/4 by 10%
THROTTLE_DECR_SMALLKEY_THROTTLE_DECR_SMALLN/ADecrease throttles by 5%.
THROTTLE1_DECR_SMALLTHROTTLE2_DECR_SMALLTHROTTLE3_DECR_SMALLTHROTTLE4_DECR_SMALLKEY_THROTTLE1_DECR_SMALLKEY_THROTTLE2_DECR_SMALLKEY_THROTTLE3_DECR_SMALLKEY_THROTTLE4_DECR_SMALLN/ADecrease throttle 1/2/3/4 by 5%.
THROTTLE_DECREASE_EX1KEY_THROTTLE_DECREASE_EX1[0]: The engine index to target (from 1 to 16, or 0 for all engines)Decrease the throttle for the indexed engine, taking into account the reverser status, ie: When in reverse a decrease event will actually increase the throttle position bringing it toward the minimum reverse position.
THROTTLE1_DECREASE_EX1THROTTLE2_DECREASE_EX1THROTTLE3_DECREASE_EX1THROTTLE4_DECREASE_EX1KEY_THROTTLE1_DECREASE_EX1KEY_THROTTLE2_DECREASE_EX1KEY_THROTTLE3_DECREASE_EX1KEY_THROTTLE4_DECREASE_EX1N/ADecrease the throttle for engine 1/2/3/4, taking into account the reverser status, ie: When in reverse a decrease event will actually increase the throttle position bringing it toward the minimum reverse position.
THROTTLE_DECREASE_SMALL_EX1KEY_THROTTLE_DECREASE_EX1_SMALL[0]: The engine index to target (from 1 to 16, or 0 for all engines)Decrease the throttle for the indexed engine by half the amount of the normal decrease event, taking into account the reverser status, ie: When in reverse a decrease event will actually increase the throttle position bringing it toward the minimum reverse position.
THROTTLE1_DECREASE_SMALL_EX1THROTTLE2_DECREASE_SMALL_EX1THROTTLE3_DECREASE_SMALL_EX1THROTTLE4_DECREASE_SMALL_EX1KEY_THROTTLE1_DECREASE_EX1_SMALLKEY_THROTTLE2_DECREASE_EX1_SMALLKEY_THROTTLE3_DECREASE_EX1_SMALLKEY_THROTTLE4_DECREASE_EX1_SMALLN/ADecrease the throttle for engine 1/2/3/4 by half the amount of the normal decrease event, taking into account the reverser status, ie: When in reverse a decrease event will actually increase the throttle position bringing it toward the minimum reverse position.
THROTTLE_DETENT_NEXTKEY_THROTTLE_DETENT_NEXTN/ABy default this is equivalent to THROTTLE_FULL. However it can be intercepted by XML/JS to implement custom behaviors.
THROTTLE_DETENT_PREVKEY_THROTTLE_DETENT_PREVN/ABy default this is equivalent to THROTTLE_CUT. However it can be intercepted by XML/JS to implement custom behaviors.
THROTTLE_FULLKEY_THROTTLE_FULLN/ASet throttles max
THROTTLE1_FULLTHROTTLE2_FULLTHROTTLE3_FULLTHROTTLE4_FULLKEY_THROTTLE1_FULLKEY_THROTTLE2_FULLKEY_THROTTLE3_FULLKEY_THROTTLE4_FULLN/ASet throttle 1/2/3/4 max
THROTTLE_FULL_EX1KEY_THROTTLE_FULL_EX1[0]: The engine index to target (from 1 to 16, or 0 for all engines)Set the indexed throttle to full power, taking into consideration the reverser status.
THROTTLE1_FULL_EX1THROTTLE2_FULL_EX1THROTTLE3_FULL_EX1THROTTLE4_FULL_EX1KEY_THROTTLE1_FULL_EX1KEY_THROTTLE2_FULL_EX1KEY_THROTTLE3_FULL_EX1KEY_THROTTLE4_FULL_EX1N/ASet the throttle 1/2/3/4 to full power, taking into consideration the reverser status.
THROTTLE_INCRKEY_THROTTLE_INCRN/AIncrease all throttles by 10%.
THROTTLE1_INCRTHROTTLE2_INCRTHROTTLE3_INCRTHROTTLE4_INCRKEY_THROTTLE1_INCRKEY_THROTTLE2_INCRKEY_THROTTLE3_INCRKEY_THROTTLE4_INCRN/AIncrease throttles 1/2/3/4 by 10%.
THROTTLE_INCR_SMALLKEY_THROTTLE_INCR_SMALLN/AIncrease all throttles by 5%.
THROTTLE1_INCR_SMALLTHROTTLE2_INCR_SMALLTHROTTLE3_INCR_SMALLTHROTTLE4_INCR_SMALLKEY_THROTTLE1_INCR_SMALLKEY_THROTTLE2_INCR_SMALLKEY_THROTTLE3_INCR_SMALLKEY_THROTTLE4_INCR_SMALLN/AIncrease throttles 1/2/3/4 by 5%.
THROTTLE_INCREASE_EX1KEY_THROTTLE_INCREASE_EX1[0]: The engine index to target (from 1 to 16, or 0 for all engines)Increase the throttle for the indexed engine, taking into account the reverser status, ie: When in reverse an increase event will actually decrease the throttle position bringing it toward the maximum reverse position.
THROTTLE1_INCREASE_EX1THROTTLE2_INCREASE_EX1THROTTLE3_INCREASE_EX1THROTTLE4_INCREASE_EX1KEY_THROTTLE1_INCREASE_EX1KEY_THROTTLE2_INCREASE_EX1KEY_THROTTLE3_INCREASE_EX1KEY_THROTTLE4_INCREASE_EX1N/AIncrease the throttle for engine 1/2/3/4, taking into account the reverser status, ie: When in reverse an increase event will actually decrease the throttle position bringing it toward the maximum reverse position.
THROTTLE_INCREASE_SMALL_EX1KEY_THROTTLE_INCREASE_SMALL_EX1[0]: The engine index to target (from 1 to 16, or 0 for all engines)Increase the throttle for the indexed engine by half the amount of the normal increase event, taking into account the reverser status, ie: When in reverse an increase event will actually decrease the throttle position bringing it toward the maximum reverse position.
THROTTLE1_INCREASE_SMALL_EX1THROTTLE2_INCREASE_SMALL_EX1THROTTLE3_INCREASE_SMALL_EX1THROTTLE4_INCREASE_SMALL_EX1KEY_THROTTLE1_INCREASE_SMALL_EX1KEY_THROTTLE2_INCREASE_SMALL_EX2KEY_THROTTLE3_INCREASE_SMALL_EX1KEY_THROTTLE4_INCREASE_SMALL_EX1N/AIncrease the throttle for engine 1/2/3/4 by half the amount of the normal increase event, taking into account the reverser status, ie: When in reverse an increase event will actually decrease the throttle position bringing it toward the maximum reverse position.
THROTTLE_RANGE_DECRKEY_THROTTLE_RANGE_DECRN/ABy default this is equivalent to THROTTLE_DECR. However it can be intercepted by XML/JS to implement custom behaviors.
THROTTLE_RANGE_INCRKEY_THROTTLE_RANGE_INCRN/ABy default this is equivalent to THROTTLE_INCR. However it can be intercepted by XML/JS to implement custom behaviors.
THROTTLE_RELATIVE_AXISKEY_THROTTLE_RELATIVE_AXISN/AIncrement or decrement the throttle based on the speed and the distance of the interaction from the user device (values are clamped between 0 to 16384).NOTE: This is primarily for the PS5 controller touch-pad, but should work with any touch-input.
THROTTLE_REVERSE_THRUST_TOGGLEKEY_THROTTLE_REVERSE_THRUST_TOGGLEN/AToggles the reverser on (1) or off (0).
THROTTLE_REVERSE_THRUST_HOLDKEY_THROTTLE_REVERSE_THRUST_HOLDN/AActivates the reverser for all engines.
THROTTLE1_REVERSE_THRUST_HOLDTHROTTLE2_REVERSE_THRUST_HOLDTHROTTLE3_REVERSE_THRUST_HOLDTHROTTLE4_REVERSE_THRUST_HOLDKEY_THROTTLE1_REVERSE_THRUST_HOLDKEY_THROTTLE2_REVERSE_THRUST_HOLDKEY_THROTTLE3_REVERSE_THRUST_HOLDKEY_THROTTLE4_REVERSE_THRUST_HOLDN/AActivates the reverser for engine 1/2/3/4.
THROTTLE_SETKEY_THROTTLE_SET[0]: the value between 0 - 16383Set throttles exactly (0- 16383)
THROTTLE1_SETTHROTTLE2_SETTHROTTLE3_SETTHROTTLE4_SETKEY_THROTTLE1_SETKEY_THROTTLE2_SETKEY_THROTTLE3_SETKEY_THROTTLE4_SET[0]: the value between 0 - 16383Set throttle 1/2/3/4 exactly (0 to 16383)
TOGGLE_THROTTLE1_REVERSE_THRUSTTOGGLE_THROTTLE2_REVERSE_THRUSTTOGGLE_THROTTLE3_REVERSE_THRUSTTOGGLE_THROTTLE4_REVERSE_THRUSTKEY_TOGGLE_THROTTLE1_REVERSE_THRUSTKEY_TOGGLE_THROTTLE2_REVERSE_THRUSTKEY_TOGGLE_THROTTLE3_REVERSE_THRUSTKEY_TOGGLE_THROTTLE4_REVERSE_THRUSTN/AToggle on or off the reverse thruster for engine 1/2/3/4.

Turbine

Key NameEvent IDParametersDescription
ISOLATE_TURBINE_SETKEY_ISOLATE_TURBINE_SET[0]: Engine index (1 to 16)[1]: State (TRUE / FALSE)Setting this to TRUE will “isolate” the engine, effectively nullyfing the engine drag and thrust.This key takes two parameters: an engine number (from 1 to 4 to flag a specific engine, or 0 to affect all engines), and a TRUE / FALSE second parameter to set the engine isolation.IMPORTANT: This event is only applicable to the DarkStar aircraft and should not be used for your own aircraft.
ISOLATE_TURBINE_ONKEY_ISOLATE_TURBINE_ON[0]: Engine index (1 to 16)Using this key will “isolate” the given engine, effectively nullyfing the engine drag and thrust.This key takes an engine number as a parameter (from 1 to 4 to flag a specific engine, or 0 to affect all engines).IMPORTANT: This event is only applicable to the DarkStar aircraft and should not be used for your own aircraft.
ISOLATE_TURBINE_OFFKEY_ISOLATE_TURBINE_OFF[0]: Engine index (1 to 16)Using this key will end the “isolation” for the engine, effectively enabling the engine drag and thrust again.This key takes an engine number as a parameter (from 1 to 4 to flag a specific engine, or 0 to affect all engines).IMPORTANT: This event is only applicable to the DarkStar aircraft and should not be used for your own aircraft.
ISOLATE_TURBINE_TOGGLEKEY_ISOLATE_TURBINE_TOGGLE[0]: Engine index (1 to 16)This key can be used to toggle an engines “isolated” state, where an isolated engine has its drag and thrust effectively nullified.This key takes an engine number as a parameter (from 1 to 4 to flag a specific engine, or 0 to affect all engines).IMPORTANT: This event is only applicable to the DarkStar aircraft and should not be used for your own aircraft.
TURBINE_IGNITION_SWITCH_SETKEY_TURBINE_IGNITION_SWITCH_SET[0]: The engine index to target (from 1 to 16, or 0 for all engines)Set the indexed engine ignition either on (1) or off (0).
TURBINE_IGNITION_SWITCH_SET1TURBINE_IGNITION_SWITCH_SET2TURBINE_IGNITION_SWITCH_SET3TURBINE_IGNITION_SWITCH_SET4KEY_TURBINE_IGNITION_SWITCH_SET1KEY_TURBINE_IGNITION_SWITCH_SET2KEY_TURBINE_IGNITION_SWITCH_SET3KEY_TURBINE_IGNITION_SWITCH_SET4N/ASet engine 1/2/3/4 ignition either on (1) or off (0).
TURBINE_IGNITION_SWITCH_TOGGLEKEY_TURBINE_IGNITION_SWITCH_TOGGLEN/ATurn the turbine ignition switch on or off.

Starter

Key NameEvent IDParametersDescription
JET_STARTERJET_STARTER[0]: The engine index to target (from 1 to 16, or 0 for all engines)Selects jet engine starter (for +/- sequence)
SET_STARTER1_HELDSET_STARTER2_HELDSET_STARTER3_HELDSET_STARTER4_HELDKEY_SET_STARTER1_HELDKEY_SET_STARTER2_HELDKEY_SET_STARTER3_HELDKEY_SET_STARTER4_HELD[0]: BoolSet the Starter for engine 1/2/3/4 to on or off. If set to on (TRUE) the starter will stay on, and setting the event to off (FALSE) will disable the starter, but only after the engine RPM is above the 50% threshold. To disable the starter immediately you should use STARTER1_SET, and note that turbine engines will need both these events triggered to off (FALSE).
SET_STARTER_ALL_HELDKEY_SET_STARTER_ALL_HELD[0]: BoolSet the Starter for all engines to on or off. If set to on (TRUE) the starter will stay on until set to off (FALSE) with another call to the event.
STARTER_GENNot used in the simulation.
STARTER_OFFNot used in the simulation.
STARTER1_SETSTARTER2_SETSTARTER3_SETSTARTER4_SETKEY_STARTER1_SETKEY_STARTER2_SETKEY_STARTER3_SETKEY_STARTER4_SET[0]: BoolSet the Starter for engine 1/2/3/4 to on or off. Note that the starter will only stay on for a short time before switching itself off again on piston engines. If you wish the starter to stay on, use SET_STARTER1_HELD.
STARTER_STARTNot used in the simulation.
TOGGLE_ALL_STARTERSKEY_TOGGLE_ALL_STARTERSN/AToggle starters.
TOGGLE_MASTER_STARTER_SWITCHKEY_TOGGLE_MASTER_STARTER_SWITCHN/AToggle starter for master engine.
TOGGLE_STARTER1TOGGLE_STARTER2TOGGLE_STARTER3TOGGLE_STARTER4KEY_TOGGLE_STARTER1KEY_TOGGLE_STARTER2KEY_TOGGLE_STARTER3KEY_TOGGLE_STARTER4N/AToggle starter 1/2/3/4.
Prev
Aircraft Electrical Events
Next
Aircraft Flight Control Events