# SIMCONNECT_WAYPOINT_FLAGS<no value>
The **SIMCONNECT\_WAYPOINT\_FLAGS** enumeration type is used with the [SIMCONNECT\_DATA\_WAYPOINT](simconnect-data-waypoint/) structure to define waypoints.

 

##### Syntax

``` cpp
enum SIMCONNECT_WAYPOINT_FLAGS{
    SIMCONNECT_WAYPOINT_SPEED_REQUESTED = 0x04,
    SIMCONNECT_WAYPOINT_THROTTLE_REQUESTED = 0x08,
    SIMCONNECT_WAYPOINT_COMPUTE_VERTICAL_SPEED = 0x10,
    SIMCONNECT_WAYPOINT_ALTITUDE_IS_AGL = 0x20,
    SIMCONNECT_WAYPOINT_ON_GROUND = 0x00100000,
    SIMCONNECT_WAYPOINT_REVERSE = 0x00200000,
    SIMCONNECT_WAYPOINT_WRAP_TO_FIRST = 0x00400000,
    };
```

 

##### Members

{{< table-wrapper >}}

| Member                                       | Description                                                                                                          |
|----------------------------------------------|----------------------------------------------------------------------------------------------------------------------|
| `SIMCONNECT_WAYPOINT_SPEED_REQUESTED`        | Specifies requested speed is valid.                                                                                  |
| `SIMCONNECT_WAYPOINT_THROTTLE_REQUESTED`     | Specifies requested throttle percentage is valid.                                                                    |
| `SIMCONNECT_WAYPOINT_COMPUTE_VERTICAL_SPEED` | Specifies that the vertical should be calculated to reach the required speed when crossing the waypoint.             |
| `SIMCONNECT_WAYPOINT_ALTITUDE_IS_AGL`        | Specifies the altitude specified is {{< glossterm >}}agl{{< /glossterm >}}.                                           |
| `SIMCONNECT_WAYPOINT_ON_GROUND`              | Specifies the waypoint should be on the ground. Make sure this flag is set if the aircraft is to taxi to this point. |
| `SIMCONNECT_WAYPOINT_REVERSE`                | Specifies that the aircraft should back up to this waypoint. This is only valid on the first waypoint.               |
| `SIMCONNECT_WAYPOINT_WRAP_TO_FIRST`          | Specifies that the next waypoint is the first waypoint. This is only valid on the last waypoint.                     |

{{< /table-wrapper >}}


 

##### Remarks

 

To set multiple waypoint flags simply OR them together. See the remarks for the `SIMCONNECT_DATA_WAYPOINT` structure.