Engine_Subtemplates

Asobo_EX1\Common\Exterior\Templates\SubTemplates\Engine_Subtemplates.xml#

Templates

• ASOBO_ET_ENGINE_Animation_SubTemplate#

  Definition from XML
  <Template Name="ASOBO_ET_ENGINE_Animation_SubTemplate"> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Get_Engine_Animation_Parameters"/> </Parameters> <UseTemplate Name="ASOBO_GT_Anim_Template"> <ANIM_CODE>#ANIM_CODE_ROTATION#</ANIM_CODE> </UseTemplate> <Condition> <Test> <Arg NotEmpty="ANIM_NAME_REVERSER"/> </Test> <True> <UseTemplate Name="ASOBO_GT_Anim_Template"> <ANIM_NAME>#ANIM_NAME_REVERSER#</ANIM_NAME> <ANIM_CODE>#ANIM_CODE_REVERSER#</ANIM_CODE> </UseTemplate> </True> </Condition> <UseTemplate Name="ASOBO_ET_COMMON_Collection_Visibility_Template"> <SAVED_NODE_IDS>STILL_NODE_IDs</SAVED_NODE_IDS> <VISIBILITY_CODE>#VISIBILITY_CODE_STILL#</VISIBILITY_CODE> </UseTemplate> <UseTemplate Name="ASOBO_ET_COMMON_Collection_Visibility_Template"> <SAVED_NODE_IDS>SLOW_NODE_IDs</SAVED_NODE_IDS> <VISIBILITY_CODE>#VISIBILITY_CODE_SLOW#</VISIBILITY_CODE> </UseTemplate> <UseTemplate Name="ASOBO_ET_COMMON_Collection_Visibility_Template"> <SAVED_NODE_IDS>BLURRED_NODE_IDs</SAVED_NODE_IDS> <VISIBILITY_CODE>#VISIBILITY_CODE_BLURRED#</VISIBILITY_CODE> </UseTemplate> </Template>

  Parameters initialization:

  • Override

    ParametersFn used:

    • ASOBO_Get_Engine_Animation_Parameters

   

  Templates used:

  • ASOBO_GT_Anim_Template

    Parameters set:

    • ANIM_CODE (using ANIM_CODE_ROTATION)
  • ASOBO_ET_COMMON_Collection_Visibility_Template

    Parameters set:

    • SAVED_NODE_IDS
    • VISIBILITY_CODE (using VISIBILITY_CODE_STILL)
  • ASOBO_ET_COMMON_Collection_Visibility_Template

    Parameters set:

    • SAVED_NODE_IDS
    • VISIBILITY_CODE (using VISIBILITY_CODE_SLOW)
  • ASOBO_ET_COMMON_Collection_Visibility_Template

    Parameters set:

    • SAVED_NODE_IDS
    • VISIBILITY_CODE (using VISIBILITY_CODE_BLURRED)

  Condition: Test(ANIM_NAME_REVERSER)

  • Case: True

     

    Templates used:

    • ASOBO_GT_Anim_Template

      Parameters set:

      • ANIM_NAME (using ANIM_NAME_REVERSER)
      • ANIM_CODE (using ANIM_CODE_REVERSER)
  [Go back to top] [Go back to index]

• ASOBO_ET_ENGINE_Reverser_Animation_SubTemplate#

  Definition from XML
  <Template Name="ASOBO_ET_ENGINE_Reverser_Animation_SubTemplate"> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Get_Engine_Animation_Parameters"/> </Parameters> <UseTemplate Name="ASOBO_GT_Anim_Template"> <ANIM_CODE>#ANIM_CODE_REVERSER#</ANIM_CODE> </UseTemplate> </Template>

  Parameters initialization:

  • Override

    ParametersFn used:

    • ASOBO_Get_Engine_Animation_Parameters

   

  Templates used:

  • ASOBO_GT_Anim_Template

    Parameters set:

    • ANIM_CODE (using ANIM_CODE_REVERSER)
  [Go back to top] [Go back to index]

• ASOBO_ET_ENGINE_Beta_Animation_SubTemplate#

  Definition from XML
  <Template Name="ASOBO_ET_ENGINE_Beta_Animation_SubTemplate"> <Parameters Type="Default"> <MIN_BETA>0</MIN_BETA> <MAX_BETA>360</MAX_BETA> <ANIM_LENGTH>100</ANIM_LENGTH> </Parameters> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Prop_RPM_Parameters"/> </Parameters> <UseTemplate Name="ASOBO_GT_Anim_Template"> <ANIM_CODE>#GET_PROP_BETA# #MIN_BETA# #MAX_BETA# 0 #ANIM_LENGTH# (F:MapRange)</ANIM_CODE> </UseTemplate> </Template>

  Parameters initialization:

  • Default

    Parameters set:

    • MIN_BETA
    • MAX_BETA
    • ANIM_LENGTH
  • Override

    ParametersFn used:

    • ASOBO_Prop_RPM_Parameters

   

  Templates used:

  • ASOBO_GT_Anim_Template

    Parameters set:

    • ANIM_CODE (using GET_PROP_BETA, MIN_BETA, MAX_BETA, ANIM_LENGTH)
  [Go back to top] [Go back to index]

• ASOBO_ET_ENGINE_Components_Animation_SubTemplate#

  Definition from XML
  <Template Name="ASOBO_ET_ENGINE_Components_Animation_SubTemplate"> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Get_Engine_Components_Animation_Parameters"/> </Parameters> <UseTemplate Name="ASOBO_GT_Anim_Template"> <ANIM_CODE>#ANIM_CODE_PROP_ROTATION#</ANIM_CODE> <ANIM_LENGTH>#ANIM_PROP_ROTATION_LENGTH#</ANIM_LENGTH> <ANIM_WRAP>True</ANIM_WRAP> </UseTemplate> <Loop> <Setup> <Param>CUR_ID</Param> <From>1</From> <Inc>1</Inc> <To>#PROP_MAX_COUNT#</To> </Setup> <Do> <Parameters Type="Override" Lifetime="Loop"> <MIN_RPM_BLADES Process="Param">MIN_RPM_BLADES_#CUR_ID#</MIN_RPM_BLADES> <MAX_RPM_BLADES Process="Param">MAX_RPM_BLADES_#CUR_ID#</MAX_RPM_BLADES> </Parameters> <Parameters Type="Default" Lifetime="Loop"> <Condition CheckSavedParameters="BLADES_NODE_IDs_#CUR_ID#"> <False> <SaveParameters ID="BLADES_NODE_IDs_#CUR_ID#"> <Prop_#ENG_ID#_Blades_#CUR_ID#/> </SaveParameters> </False> </Condition> <Condition CheckSavedParameters="CONE_NODE_IDs_#CUR_ID#"> <False> <SaveParameters ID="CONE_NODE_IDs_#CUR_ID#" Append="Default"> <Prop_#ENG_ID#_Cone_#CUR_ID#/> </SaveParameters> </False> </Condition> <Condition CheckSavedParameters="SIDE_NODE_IDs_#CUR_ID#"> <False> <SaveParameters ID="SIDE_NODE_IDs_#CUR_ID#" Append="Default"> <Prop_#ENG_ID#_Side_#CUR_ID#/> </SaveParameters> </False> </Condition> <Condition Valid="COPY_RPM_BLADES_TO_CONE"> <MIN_RPM_CONE_#CUR_ID# Process="Param">MIN_RPM_BLADES_#CUR_ID#</MIN_RPM_CONE_#CUR_ID#> <MAX_RPM_CONE_#CUR_ID# Process="Param">MAX_RPM_BLADES_#CUR_ID#</MAX_RPM_CONE_#CUR_ID#> </Condition> <Condition Valid="COPY_RPM_BLADES_TO_SIDE"> <MIN_RPM_SIDE_#CUR_ID# Process="Param">MIN_RPM_BLADES_#CUR_ID#</MIN_RPM_SIDE_#CUR_ID#> <MAX_RPM_SIDE_#CUR_ID# Process="Param">MAX_RPM_BLADES_#CUR_ID#</MAX_RPM_SIDE_#CUR_ID#> </Condition> </Parameters> <Parameters Type="Override" Lifetime="Loop"> <MIN_RPM_CONE Process="Param">MIN_RPM_CONE_#CUR_ID#</MIN_RPM_CONE> <MAX_RPM_CONE Process="Param">MAX_RPM_CONE_#CUR_ID#</MAX_RPM_CONE> <MIN_RPM_SIDE Process="Param">MIN_RPM_SIDE_#CUR_ID#</MIN_RPM_SIDE> <MAX_RPM_SIDE Process="Param">MAX_RPM_SIDE_#CUR_ID#</MAX_RPM_SIDE> </Parameters> <Condition> <Test> <LowerOrEqual> <Number>#CUR_ID#</Number> <Number>#PROP_BLADES_COUNT#</Number> </LowerOrEqual> </Test> <True> <UseTemplate Name="ASOBO_ET_COMMON_Collection_Visibility_Template"> <SAVED_NODE_IDS>BLADES_NODE_IDs_#CUR_ID#</SAVED_NODE_IDS> <UseParametersFn Name="ASOBO_Get_Engine_Visibility_Limits_Parameters"> <MIN_RPM>#MIN_RPM_BLADES#</MIN_RPM> <MAX_RPM>#MAX_RPM_BLADES#</MAX_RPM> </UseParametersFn> </UseTemplate> </True> </Condition> <Condition> <Test> <LowerOrEqual> <Number>#CUR_ID#</Number> <Number>#PROP_CONE_COUNT#</Number> </LowerOrEqual> </Test> <True> <UseTemplate Name="ASOBO_ET_COMMON_Collection_Visibility_Template"> <SAVED_NODE_IDS>CONE_NODE_IDs_#CUR_ID#</SAVED_NODE_IDS> <UseParametersFn Name="ASOBO_Get_Engine_Visibility_Limits_Parameters"> <MIN_RPM>#MIN_RPM_CONE#</MIN_RPM> <MAX_RPM>#MAX_RPM_CONE#</MAX_RPM> </UseParametersFn> </UseTemplate> </True> </Condition> <Condition> <Test> <LowerOrEqual> <Number>#CUR_ID#</Number> <Number>#PROP_SIDE_COUNT#</Number> </LowerOrEqual> </Test> <True> <UseTemplate Name="ASOBO_ET_COMMON_Collection_Visibility_Template"> <SAVED_NODE_IDS>SIDE_NODE_IDs_#CUR_ID#</SAVED_NODE_IDS> <UseParametersFn Name="ASOBO_Get_Engine_Visibility_Limits_Parameters"> <MIN_RPM>#MIN_RPM_SIDE#</MIN_RPM> <MAX_RPM>#MAX_RPM_SIDE#</MAX_RPM> </UseParametersFn> </UseTemplate> </True> </Condition> </Do> </Loop> </Template>

  Parameters initialization:

  • Override

    ParametersFn used:

    • ASOBO_Get_Engine_Components_Animation_Parameters

  Parameters read:

  • PROP_MAX_COUNT

  Parameters set:

  • CUR_ID
  • MIN_RPM_BLADES (using CUR_ID)
  • MAX_RPM_BLADES (using CUR_ID)
  • MIN_RPM_CONE (using CUR_ID)
  • MAX_RPM_CONE (using CUR_ID)
  • MIN_RPM_SIDE (using CUR_ID)
  • MAX_RPM_SIDE (using CUR_ID)

   

  Templates used:

  • ASOBO_GT_Anim_Template

    Parameters set:

    • ANIM_CODE (using ANIM_CODE_PROP_ROTATION)
    • ANIM_LENGTH (using ANIM_PROP_ROTATION_LENGTH)
    • ANIM_WRAP

  Condition: CheckSavedParameters(BLADES_NODE_IDs_#CUR_ID#)

  • Case: False

    Parameters read:

    • CUR_ID

    Parameters set:

    • Prop_#ENG_ID#_Blades_#CUR_ID#

  Condition: CheckSavedParameters(CONE_NODE_IDs_#CUR_ID#)

  • Case: False

    Parameters read:

    • CUR_ID

    Parameters set:

    • Prop_#ENG_ID#_Cone_#CUR_ID#

  Condition: CheckSavedParameters(SIDE_NODE_IDs_#CUR_ID#)

  • Case: False

    Parameters read:

    • CUR_ID

    Parameters set:

    • Prop_#ENG_ID#_Side_#CUR_ID#

  Condition: Valid(COPY_RPM_BLADES_TO_CONE)

  • Case: True

    Parameters set:

    • MIN_RPM_CONE_#CUR_ID# (using CUR_ID)
    • MAX_RPM_CONE_#CUR_ID# (using CUR_ID)

  Condition: Valid(COPY_RPM_BLADES_TO_SIDE)

  • Case: True

    Parameters set:

    • MIN_RPM_SIDE_#CUR_ID# (using CUR_ID)
    • MAX_RPM_SIDE_#CUR_ID# (using CUR_ID)

  Condition: Test

  • Case: True

     

    Templates used:

    • ASOBO_ET_COMMON_Collection_Visibility_Template

      Parameters set:

      • SAVED_NODE_IDS (using CUR_ID)

      ParametersFn used:

      • ASOBO_Get_Engine_Visibility_Limits_Parameters

        Parameters set:

        • MIN_RPM (using MIN_RPM_BLADES)
        • MAX_RPM (using MAX_RPM_BLADES)

  Condition: Test

  • Case: True

     

    Templates used:

    • ASOBO_ET_COMMON_Collection_Visibility_Template

      Parameters set:

      • SAVED_NODE_IDS (using CUR_ID)

      ParametersFn used:

      • ASOBO_Get_Engine_Visibility_Limits_Parameters

        Parameters set:

        • MIN_RPM (using MIN_RPM_CONE)
        • MAX_RPM (using MAX_RPM_CONE)

  Condition: Test

  • Case: True

     

    Templates used:

    • ASOBO_ET_COMMON_Collection_Visibility_Template

      Parameters set:

      • SAVED_NODE_IDS (using CUR_ID)

      ParametersFn used:

      • ASOBO_Get_Engine_Visibility_Limits_Parameters

        Parameters set:

        • MIN_RPM (using MIN_RPM_SIDE)
        • MAX_RPM (using MAX_RPM_SIDE)
  [Go back to top] [Go back to index]

• ASOBO_ET_ROTOR_Animation_SubTemplate#

  Definition from XML
  <Template Name="ASOBO_ET_ROTOR_Animation_SubTemplate"> <Condition Check="ANIM_NAME_CONE"> <UseTemplate Name="ASOBO_ET_ROTOR_Coning_Animation_SubTemplate"> <ANIM_NAME>#ANIM_NAME_CONE#</ANIM_NAME> </UseTemplate> </Condition> <Condition Check="ANIM_NAME_SWASHPLATE"> <UseTemplate Name="ASOBO_ET_ROTOR_Swashplate_Animation_SubTemplate"> <ANIM_NAME>#ANIM_NAME_SWASHPLATE#</ANIM_NAME> </UseTemplate> </Condition> <Condition Check="ANIM_NAME_PITCH"> <UseTemplate Name="ASOBO_ET_ROTOR_Tail_Blade_Pitch_Animation_SubTemplate"> <ANIM_NAME>#ANIM_NAME_PITCH#</ANIM_NAME> </UseTemplate> </Condition> </Template>

  Condition: Check(ANIM_NAME_CONE)

  • Case: True

     

    Templates used:

    • ASOBO_ET_ROTOR_Coning_Animation_SubTemplate

      Parameters set:

      • ANIM_NAME (using ANIM_NAME_CONE)

  Condition: Check(ANIM_NAME_SWASHPLATE)

  • Case: True

     

    Templates used:

    • ASOBO_ET_ROTOR_Swashplate_Animation_SubTemplate

      Parameters set:

      • ANIM_NAME (using ANIM_NAME_SWASHPLATE)

  Condition: Check(ANIM_NAME_PITCH)

  • Case: True

     

    Templates used:

    • ASOBO_ET_ROTOR_Tail_Blade_Pitch_Animation_SubTemplate

      Parameters set:

      • ANIM_NAME (using ANIM_NAME_PITCH)
  [Go back to top] [Go back to index]

• ASOBO_ET_ROTOR_Coning_Animation_SubTemplate#

  Definition from XML
  <Template Name="ASOBO_ET_ROTOR_Coning_Animation_SubTemplate"> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Get_Rotor_Coning_Animation_Parameters"/> </Parameters> <UseTemplate Name="ASOBO_GT_Anim_Template"> <ANIM_CODE>#ANIM_CODE_CONING#</ANIM_CODE> </UseTemplate> </Template>

  Parameters initialization:

  • Override

    ParametersFn used:

    • ASOBO_Get_Rotor_Coning_Animation_Parameters

   

  Templates used:

  • ASOBO_GT_Anim_Template

    Parameters set:

    • ANIM_CODE (using ANIM_CODE_CONING)
  [Go back to top] [Go back to index]

• ASOBO_ET_ROTOR_Swashplate_Animation_SubTemplate#

  Definition from XML
  <Template Name="ASOBO_ET_ROTOR_Swashplate_Animation_SubTemplate"> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Get_Rotor_Swashplate_Animation_Parameters"/> </Parameters> <UseTemplate Name="ASOBO_GT_Anim_Template"> <ANIM_CODE>#ANIM_CODE_SWASHPLATE#</ANIM_CODE> </UseTemplate> </Template>

  Parameters initialization:

  • Override

    ParametersFn used:

    • ASOBO_Get_Rotor_Swashplate_Animation_Parameters

   

  Templates used:

  • ASOBO_GT_Anim_Template

    Parameters set:

    • ANIM_CODE (using ANIM_CODE_SWASHPLATE)
  [Go back to top] [Go back to index]

• ASOBO_ET_ROTOR_Tail_Blade_Pitch_Animation_SubTemplate#

  Definition from XML
  <Template Name="ASOBO_ET_ROTOR_Tail_Blade_Pitch_Animation_SubTemplate"> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Get_Rotor_Tail_Blade_Pitch_Animation_Parameters"/> </Parameters> <UseTemplate Name="ASOBO_GT_Anim_Template"> <ANIM_CODE>#ANIM_CODE_BLADE_PITCH#</ANIM_CODE> </UseTemplate> </Template>

  Parameters initialization:

  • Override

    ParametersFn used:

    • ASOBO_Get_Rotor_Tail_Blade_Pitch_Animation_Parameters

   

  Templates used:

  • ASOBO_GT_Anim_Template

    Parameters set:

    • ANIM_CODE (using ANIM_CODE_BLADE_PITCH)
  [Go back to top] [Go back to index]

• ASOBO_ET_ENGINE_Rotor_Model_Swap_RPM_SubTemplate#

  Definition from XML
  <Template Name="ASOBO_ET_ENGINE_Rotor_Model_Swap_RPM_SubTemplate"> <Parameters Type="Default"> <ROTOR>PRIMARY</ROTOR> <RPM_THRESHOLD>20</RPM_THRESHOLD> </Parameters> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_ROTOR_RPM_Parameters"/> </Parameters> <Parameters Type="Override"> <Switch Param="ROTOR"> <Case Value="PRIMARY"> <GET_ROTOR_RPM>#GET_PRIMARY_ROTOR_RPM#</GET_ROTOR_RPM> </Case> <Case Value="SECONDARY"> <GET_ROTOR_RPM>#GET_SECONDARY_ROTOR_RPM#</GET_ROTOR_RPM> </Case> </Switch> </Parameters> <Parameters Type="Default"> <IS_HIGH_RPM>#GET_ROTOR_RPM# #RPM_THRESHOLD# &gt;</IS_HIGH_RPM> </Parameters> <UseTemplate Name="ASOBO_CT_Swapable_Mesh_Template"> <MESH_VISIBLE_WHEN_TRUE>#NODE_VISIBLE_AT_HIGH_RPM#</MESH_VISIBLE_WHEN_TRUE> <MESH_VISIBLE_WHEN_FALSE>#NODE_VISIBLE_AT_LOW_RPM#</MESH_VISIBLE_WHEN_FALSE> <IS_VISIBLE>#IS_HIGH_RPM#</IS_VISIBLE> </UseTemplate> </Template>

  Parameters initialization:

  • Default

    Parameters set:

    • ROTOR
    • RPM_THRESHOLD
  • Override

    ParametersFn used:

    • ASOBO_ROTOR_RPM_Parameters
  • Override

    Condition: Switch(ROTOR)

    • Case: PRIMARY

      Parameters set:

      • GET_ROTOR_RPM (using GET_PRIMARY_ROTOR_RPM)
    • Case: SECONDARY

      Parameters set:

      • GET_ROTOR_RPM (using GET_SECONDARY_ROTOR_RPM)
  • Default

    Parameters set:

    • IS_HIGH_RPM (using GET_ROTOR_RPM, RPM_THRESHOLD)

   

  Templates used:

  • ASOBO_CT_Swapable_Mesh_Template
    • May include a subtemplate using the parameter 'FINAL_VISIBILITY_TEMPLATE' and resolve to the following template(s):
      • ASOBO_GT_Component_Visibility_Template

    Parameters set:

    • MESH_VISIBLE_WHEN_TRUE (using NODE_VISIBLE_AT_HIGH_RPM)
    • MESH_VISIBLE_WHEN_FALSE (using NODE_VISIBLE_AT_LOW_RPM)
    • IS_VISIBLE (using IS_HIGH_RPM)
  [Go back to top] [Go back to index]

• ASOBO_ET_ENGINE_Propeller_Model_Swap_RPM_SubTemplate#

  Definition from XML
  <Template Name="ASOBO_ET_ENGINE_Propeller_Model_Swap_RPM_SubTemplate"> <Parameters Type="Default"> <ENG_ID>1</ENG_ID> <RPM_THRESHOLD>20</RPM_THRESHOLD> </Parameters> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Prop_RPM_Parameters"/> </Parameters> <Parameters Type="Default"> <IS_HIGH_RPM>#GET_PROP_RPM# #RPM_THRESHOLD# &gt;</IS_HIGH_RPM> </Parameters> <UseTemplate Name="ASOBO_CT_Swapable_Mesh_Template"> <MESH_VISIBLE_WHEN_TRUE>#NODE_VISIBLE_AT_HIGH_RPM#</MESH_VISIBLE_WHEN_TRUE> <MESH_VISIBLE_WHEN_FALSE>#NODE_VISIBLE_AT_LOW_RPM#</MESH_VISIBLE_WHEN_FALSE> <IS_VISIBLE>#IS_HIGH_RPM#</IS_VISIBLE> </UseTemplate> </Template>

  Parameters initialization:

  • Default

    Parameters set:

    • ENG_ID
    • RPM_THRESHOLD
  • Override

    ParametersFn used:

    • ASOBO_Prop_RPM_Parameters
  • Default

    Parameters set:

    • IS_HIGH_RPM (using GET_PROP_RPM, RPM_THRESHOLD)

   

  Templates used:

  • ASOBO_CT_Swapable_Mesh_Template
    • May include a subtemplate using the parameter 'FINAL_VISIBILITY_TEMPLATE' and resolve to the following template(s):
      • ASOBO_GT_Component_Visibility_Template

    Parameters set:

    • MESH_VISIBLE_WHEN_TRUE (using NODE_VISIBLE_AT_HIGH_RPM)
    • MESH_VISIBLE_WHEN_FALSE (using NODE_VISIBLE_AT_LOW_RPM)
    • IS_VISIBLE (using IS_HIGH_RPM)
  [Go back to top] [Go back to index]

• ASOBO_ET_ENGINE_Turbine_Model_Swap_RPM_SubTemplate#

  Definition from XML
  <Template Name="ASOBO_ET_ENGINE_Turbine_Model_Swap_RPM_SubTemplate"> <Parameters Type="Default"> <ENG_ID>1</ENG_ID> <RPM_THRESHOLD>20</RPM_THRESHOLD> </Parameters> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Turbine_Anim_RPM_Parameters"/> </Parameters> <Parameters Type="Default"> <IS_HIGH_RPM>#GET_TURB_RPM# #RPM_THRESHOLD# &gt;</IS_HIGH_RPM> </Parameters> <UseTemplate Name="ASOBO_CT_Swapable_Mesh_Template"> <MESH_VISIBLE_WHEN_TRUE>#NODE_VISIBLE_AT_HIGH_RPM#</MESH_VISIBLE_WHEN_TRUE> <MESH_VISIBLE_WHEN_FALSE>#NODE_VISIBLE_AT_LOW_RPM#</MESH_VISIBLE_WHEN_FALSE> <IS_VISIBLE>#IS_HIGH_RPM#</IS_VISIBLE> </UseTemplate> </Template>

  Parameters initialization:

  • Default

    Parameters set:

    • ENG_ID
    • RPM_THRESHOLD
  • Override

    ParametersFn used:

    • ASOBO_Turbine_Anim_RPM_Parameters
  • Default

    Parameters set:

    • IS_HIGH_RPM (using GET_TURB_RPM, RPM_THRESHOLD)

   

  Templates used:

  • ASOBO_CT_Swapable_Mesh_Template
    • May include a subtemplate using the parameter 'FINAL_VISIBILITY_TEMPLATE' and resolve to the following template(s):
      • ASOBO_GT_Component_Visibility_Template

    Parameters set:

    • MESH_VISIBLE_WHEN_TRUE (using NODE_VISIBLE_AT_HIGH_RPM)
    • MESH_VISIBLE_WHEN_FALSE (using NODE_VISIBLE_AT_LOW_RPM)
    • IS_VISIBLE (using IS_HIGH_RPM)
  [Go back to top] [Go back to index]