Electrical_Interactions
Asobo_EX1\Common\Interior\Templates\ParametersFn\InteractionPresets\Electrical_Interactions.xml
Source XML
<ModelBehaviors>
<!-- ################################## ELECTRICAL ################################ -->
<!-- ############################################################################## -->
<!-- Battery -->
<ParametersFn Name="ASOBO_Battery_State_Settings_Config">
<Parameters Type="Override">
<UseParametersFn Name="ASOBO_Battery_Parameters"/>
</Parameters>
<ReturnParameters>
<UseParametersFn Name="ASOBO_Auto_Define_XStates_Variant_Helper"/>
<UseParametersFn Name="ASOBO_Watch_Simvar_Helper">
<SIMVAR>#SIMVAR_BATTERY_SWITCH#</SIMVAR>
</UseParametersFn>
<!-- Check position -->
<POS_OFF_CHECK>#GET_BATTERY_SWITCH# !</POS_OFF_CHECK>
<POS_ON_CHECK>#GET_BATTERY_SWITCH#</POS_ON_CHECK>
<!-- Set position -->
<POS_OFF_CODE>0 #SET_BATTERY#</POS_OFF_CODE>
<POS_ON_CODE>1 #SET_BATTERY#</POS_ON_CODE>
</ReturnParameters>
</ParametersFn>
<!-- ############################################################################## -->
<!-- Circuit connection -->
<ParametersFn Name="ASOBO_Circuit_Power_Settings_Config">
<Parameters Type="Default">
<UseParametersFn Name="ASOBO_Circuit_Parameters"/>
</Parameters>
<ReturnParameters>
<VALUE_TYPE>Percent</VALUE_TYPE>
<IE_GET_STATE>#GET_CIRCUIT_POWER_SETTING#</IE_GET_STATE>
<IE_SET_STATE>#SET_CIRCUIT_POWER_SETTING#</IE_SET_STATE>
<UseParametersFn Name="ASOBO_Watch_Simvar_Helper">
<SIMVAR>#SIMVAR_CIRCUIT_POWER#</SIMVAR>
</UseParametersFn>
</ReturnParameters>
</ParametersFn>
<!-- ############################################################################## -->
<ParametersFn Name="ASOBO_Circuit_Switch_Settings_Config">
<Parameters Type="Default">
<UseParametersFn Name="ASOBO_Circuit_Parameters"/>
</Parameters>
<ReturnParameters>
<UseParametersFn Name="ASOBO_Auto_Define_XStates_Variant_Helper"/>
<UseParametersFn Name="ASOBO_Watch_Simvar_Helper">
<SIMVAR>#SIMVAR_CIRCUIT_ON#</SIMVAR>
</UseParametersFn>
<!-- Check position -->
<POS_OFF_CHECK>#GET_CIRCUIT_SWITCH# !</POS_OFF_CHECK>
<POS_ON_CHECK>#GET_CIRCUIT_SWITCH#</POS_ON_CHECK>
<!-- Set position -->
<POS_OFF_CODE>0 #SET_CIRCUIT#</POS_OFF_CODE>
<POS_ON_CODE>1 #SET_CIRCUIT#</POS_ON_CODE>
</ReturnParameters>
</ParametersFn>
<!-- ############################################################################## -->
<!-- Circuit connection -->
<ParametersFn Name="ASOBO_Circuit_State_Settings_Config">
<Parameters Type="Default">
<UseParametersFn Name="ASOBO_Circuit_Connection_Parameters"/>
</Parameters>
<ReturnParameters>
<UseParametersFn Name="ASOBO_Auto_Define_XStates_Variant_Helper"/>
<UseParametersFn Name="ASOBO_Watch_Simvar_Helper">
<SIMVAR>#SIMVAR_CONNECTION#</SIMVAR>
</UseParametersFn>
<!-- Check position -->
<POS_OFF_CHECK>#GET_CONNECTION# !</POS_OFF_CHECK>
<POS_ON_CHECK>#GET_CONNECTION#</POS_ON_CHECK>
<!-- Set position -->
<POS_OFF_CODE>0 #SET_CONNECTION#</POS_OFF_CODE>
<POS_ON_CODE>1 #SET_CONNECTION#</POS_ON_CODE>
</ReturnParameters>
</ParametersFn>
<!-- ############################################################################## -->
<!-- Bus connection -->
<ParametersFn Name="ASOBO_Bus_State_Settings_Config">
<Parameters Type="Default">
<UseParametersFn Name="ASOBO_Bus_Connection_Parameters"/>
</Parameters>
<ReturnParameters>
<UseParametersFn Name="ASOBO_Auto_Define_XStates_Variant_Helper"/>
<!-- Check position -->
<POS_OFF_CHECK>#GET_CONNECTION# !</POS_OFF_CHECK>
<POS_ON_CHECK>#GET_CONNECTION#</POS_ON_CHECK>
<!-- Set position -->
<POS_OFF_CODE>0 #SET_CONNECTION#</POS_OFF_CODE>
<POS_ON_CODE>1 #SET_CONNECTION#</POS_ON_CODE>
</ReturnParameters>
</ParametersFn>
<!-- ############################################################################## -->
<!-- Bus connection swap -->
<ParametersFn Name="ASOBO_Bus_Swap_Settings_Config">
<Parameters Type="Default">
<ID>1</ID>
</Parameters>
<Parameters Type="Default">
<BUS_ID_1>#ID#</BUS_ID_1>
<BUS_ID_2>#ID#</BUS_ID_2>
</Parameters>
<Parameters Type="Default">
<UseParametersFn Name="ASOBO_Bus_Connection_Parameters">
<BUS_ID>#BUS_ID_1#</BUS_ID>
<OUT_PARAM_SUFFIX>_1</OUT_PARAM_SUFFIX>
</UseParametersFn>
<UseParametersFn Name="ASOBO_Bus_Connection_Parameters">
<BUS_ID>#BUS_ID_2#</BUS_ID>
<OUT_PARAM_SUFFIX>_2</OUT_PARAM_SUFFIX>
</UseParametersFn>
</Parameters>
<ReturnParameters>
<UseParametersFn Name="ASOBO_Auto_Define_XStates_Variant_Helper"/>
<!-- Check position -->
<POS_OFF_CHECK>#GET_1_CONNECTION# ! #GET_2_CONNECTION# and</POS_OFF_CHECK>
<POS_ON_CHECK>#GET_1_CONNECTION# #GET_2_CONNECTION# ! and</POS_ON_CHECK>
<!-- Set position -->
<POS_OFF_CODE>0 #SET_1_CONNECTION# 1 #SET_2_CONNECTION#</POS_OFF_CODE>
<POS_ON_CODE>1 #SET_1_CONNECTION# 0 #SET_2_CONNECTION#</POS_ON_CODE>
</ReturnParameters>
</ParametersFn>
<!-- ############################################################################## -->
<!-- Generator -->
<ParametersFn Name="ASOBO_Generator_State_Settings_Config">
<Parameters Type="Default">
<ID>1</ID>
</Parameters>
<Parameters Type="Default">
<ALTERNATOR_ID>#ID#</ALTERNATOR_ID>
</Parameters>
<Parameters Type="Default">
<UseParametersFn Name="ASOBO_Alternator_Parameters"/>
</Parameters>
<ReturnParameters>
<UseParametersFn Name="ASOBO_Auto_Define_XStates_Variant_Helper"/>
<UseParametersFn Name="ASOBO_Watch_Simvar_Helper">
<SIMVAR>#SIMVAR_ALTERNATOR_SWITCH#</SIMVAR>
</UseParametersFn>
<!-- Check position -->
<POS_OFF_CHECK>#GET_ALTERNATOR_SWITCH# !</POS_OFF_CHECK>
<POS_ON_CHECK>#GET_ALTERNATOR_SWITCH#</POS_ON_CHECK>
<!-- Set position -->
<POS_OFF_CODE>0 #SET_ALTERNATOR#</POS_OFF_CODE>
<POS_ON_CODE>1 #SET_ALTERNATOR#</POS_ON_CODE>
</ReturnParameters>
</ParametersFn>
<!-- ############################################################################## -->
<!-- External_Power -->
<ParametersFn Name="ASOBO_External_Power_State_Settings_Config">
<Parameters Type="Default">
<ID>1</ID>
</Parameters>
<Parameters Type="Default">
<EXTERNAL_POWER_ID>#ID#</EXTERNAL_POWER_ID>
</Parameters>
<Parameters Type="Default">
<UseParametersFn Name="ASOBO_External_Power_Parameters"/>
</Parameters>
<ReturnParameters>
<UseParametersFn Name="ASOBO_Auto_Define_XStates_Variant_Helper"/>
<UseParametersFn Name="ASOBO_Watch_Simvar_Helper">
<SIMVAR>#SIMVAR_EXTERNAL_POWER_SWITCH#</SIMVAR>
</UseParametersFn>
<!-- Check position -->
<POS_OFF_CHECK>#GET_EXTERNAL_POWER_SWITCH# !</POS_OFF_CHECK>
<POS_ON_CHECK>#GET_EXTERNAL_POWER_SWITCH#</POS_ON_CHECK>
<!-- Set position -->
<POS_OFF_CODE>0 #SET_EXTERNAL_POWER#</POS_OFF_CODE>
<POS_ON_CODE>1 #SET_EXTERNAL_POWER#</POS_ON_CODE>
</ReturnParameters>
</ParametersFn>
<!-- ############################################################################## -->
<!-- APU_Generator -->
<ParametersFn Name="ASOBO_APU_Generator_State_Settings_Config">
<Parameters Type="Default">
<ID>1</ID>
</Parameters>
<Parameters Type="Default">
<APU_ID>#ID#</APU_ID>
</Parameters>
<Parameters Type="Default">
<UseParametersFn Name="ASOBO_APU_Generator_Parameters"/>
</Parameters>
<ReturnParameters>
<UseParametersFn Name="ASOBO_Auto_Define_XStates_Variant_Helper"/>
<UseParametersFn Name="ASOBO_Watch_Simvar_Helper">
<SIMVAR>#SIMVAR_APU_GENERATOR_SWITCH#</SIMVAR>
</UseParametersFn>
<!-- Check position -->
<POS_OFF_CHECK>#GET_APU_GENERATOR_SWITCH# !</POS_OFF_CHECK>
<POS_ON_CHECK>#GET_APU_GENERATOR_SWITCH#</POS_ON_CHECK>
<!-- Set position -->
<POS_OFF_CODE>0 #SET_APU_GENERATOR#</POS_OFF_CODE>
<POS_ON_CODE>1 #SET_APU_GENERATOR#</POS_ON_CODE>
</ReturnParameters>
</ParametersFn>
<!-- ############################################################################## -->
<!-- (EX1) Line Connection -->
<ParametersFn Name="ASOBO_Line_Connection_Settings_Config">
<Parameters Type="Default">
<ID>1</ID>
</Parameters>
<Parameters Type="Default">
<LINE_ID>#ID#</LINE_ID>
</Parameters>
<Parameters Type="Override">
<UseParametersFn Name="ASOBO_Line_Connection_Parameters"/>
</Parameters>
<ReturnParameters>
<UseParametersFn Name="ASOBO_Auto_Define_XStates_Variant_Helper"/>
<UseParametersFn Name="ASOBO_Watch_Simvar_Helper">
<SIMVAR>#SIMVAR_CONNECTION#</SIMVAR>
</UseParametersFn>
<!-- Check position -->
<POS_OFF_CHECK>#GET_CONNECTION# !</POS_OFF_CHECK>
<POS_ON_CHECK>#GET_CONNECTION#</POS_ON_CHECK>
<!-- Set position -->
<POS_OFF_CODE>0 #SET_CONNECTION#</POS_OFF_CODE>
<POS_ON_CODE>1 #SET_CONNECTION#</POS_ON_CODE>
</ReturnParameters>
</ParametersFn>
<!-- ############################################################################## -->
<!-- (EX1) LineSwap Connection -->
<ParametersFn Name="ASOBO_Line_Swap_Connection_Settings_Config">
<Parameters Type="Default">
<ID>1</ID>
</Parameters>
<Parameters Type="Default">
<LINE_ID_1>#ID#</LINE_ID_1>
<LINE_ID_2>#ID#</LINE_ID_2>
</Parameters>
<Parameters Type="Override">
<UseParametersFn Name="ASOBO_Line_Connection_Parameters">
<LINE_ID>#LINE_ID_1#</LINE_ID>
<OUT_PARAM_SUFFIX>_1</OUT_PARAM_SUFFIX>
</UseParametersFn>
<UseParametersFn Name="ASOBO_Line_Connection_Parameters">
<LINE_ID>#LINE_ID_2#</LINE_ID>
<OUT_PARAM_SUFFIX>_2</OUT_PARAM_SUFFIX>
</UseParametersFn>
</Parameters>
<ReturnParameters>
<UseParametersFn Name="ASOBO_Auto_Define_XStates_Variant_Helper"/>
<UseParametersFn Name="ASOBO_Watch_Simvar_Helper">
<SIMVAR>#SIMVAR_1_CONNECTION#</SIMVAR>
<SIMVAR>#SIMVAR_2_CONNECTION#</SIMVAR>
</UseParametersFn>
<!-- Check position -->
<POS_OFF_CHECK>#GET_1_CONNECTION# #GET_2_CONNECTION# ! and</POS_OFF_CHECK>
<POS_ON_CHECK>#GET_1_CONNECTION# ! #GET_2_CONNECTION# and</POS_ON_CHECK>
<!-- Set position -->
<POS_OFF_CODE>1 #SET_1_CONNECTION# 0 #SET_2_CONNECTION#</POS_OFF_CODE>
<POS_ON_CODE>0 #SET_1_CONNECTION# 1 #SET_2_CONNECTION#</POS_ON_CODE>
<UseParametersFn Name="ASOBO_Add_Update_Helper">
<UPDATE_CODE>
1 #SET_1_CONNECTION#
0 #SET_2_CONNECTION#
</UPDATE_CODE>
<UPDATE_ONCE>True</UPDATE_ONCE>
</UseParametersFn>
</ReturnParameters>
</ParametersFn>
<!-- ############################################################################## -->
<!-- (EX1) Line Breaker -->
<ParametersFn Name="ASOBO_Line_Breaker_Settings_Config">
<Parameters Type="Default">
<ID>1</ID>
</Parameters>
<Parameters Type="Default">
<LINE_ID>#ID#</LINE_ID>
<FORWARD_INC_DEC_TO_IE>False</FORWARD_INC_DEC_TO_IE>
</Parameters>
<Parameters Type="Override">
<UseParametersFn Name="ASOBO_Line_Breaker_Parameters"/>
</Parameters>
<ReturnParameters>
<UseParametersFn Name="ASOBO_Auto_Define_XStates_Variant_Helper"/>
<UseParametersFn Name="ASOBO_Watch_Simvar_Helper">
<SIMVAR>#SIMVAR_BREAKER#</SIMVAR>
</UseParametersFn>
<!-- Check position -->
<POS_OFF_CHECK>#GET_BREAKER# !</POS_OFF_CHECK>
<POS_ON_CHECK>#GET_BREAKER#</POS_ON_CHECK>
<!-- Set position -->
<POS_OFF_CODE>0 #SET_BREAKER#</POS_OFF_CODE>
<POS_ON_CODE>1 #SET_BREAKER#</POS_ON_CODE>
<FORWARD_INC_DEC_TO_IE>#FORWARD_INC_DEC_TO_IE#</FORWARD_INC_DEC_TO_IE>
</ReturnParameters>
</ParametersFn>
<!-- ############################################################################## -->
<!-- (EX1) Multiple Lines Breaker -->
<ParametersFn Name="ASOBO_Multiple_Line_Breaker_Settings_Config">
<Parameters Type="Default">
<ID>1</ID>
</Parameters>
<Parameters Type="Default">
<LINE_ID>#ID#</LINE_ID>
</Parameters>
<Parameters Type="Override">
<POS_OFF_CHECK>1</POS_OFF_CHECK>
<POS_ON_CHECK>1</POS_ON_CHECK>
<POS_OFF_CODE/>
<POS_ON_CODE/>
</Parameters>
<Parameters Type="Override">
<Loop>
<Setup>
<Param>CUR_ID</Param>
<From>1</From>
<Inc>1</Inc>
<While>
<Arg Check="LINE_ID_#CUR_ID#"/>
</While>
</Setup>
<Do>
<Parameters Type="Override">
<UseParametersFn Name="ASOBO_Line_Breaker_Parameters">
<LINE_ID Process="Param">LINE_ID_#CUR_ID#</LINE_ID>
</UseParametersFn>
</Parameters>
<Parameters Type="Override" LifeTime="Loop">
<POS_OFF_CHECK>#POS_OFF_CHECK# #GET_BREAKER# ! and</POS_OFF_CHECK>
<POS_ON_CHECK>#POS_ON_CHECK# #GET_BREAKER# and</POS_ON_CHECK>
<POS_OFF_CODE>#POS_OFF_CODE# 0 #SET_BREAKER#</POS_OFF_CODE>
<POS_ON_CODE>#POS_ON_CODE# 1 #SET_BREAKER#</POS_ON_CODE>
<SIMVAR_#CUR_ID#>#SIMVAR_BREAKER#</SIMVAR_#CUR_ID#>
</Parameters>
</Do>
</Loop>
</Parameters>
<ReturnParameters>
<UseParametersFn Name="ASOBO_Auto_Define_XStates_Variant_Helper"/>
<UseParametersFn Name="ASOBO_Watch_Simvar_Helper">
<Loop>
<Setup>
<Param>CUR_ID</Param>
<From>1</From>
<Inc>1</Inc>
<While>
<Arg Check="LINE_ID_#CUR_ID#"/>
</While>
</Setup>
<Do>
<SIMVAR Process="Param">SIMVAR_#CUR_ID#</SIMVAR>
</Do>
</Loop>
</UseParametersFn>
<!-- Check position -->
<POS_OFF_CHECK>#POS_OFF_CHECK#</POS_OFF_CHECK>
<POS_ON_CHECK>#POS_ON_CHECK#</POS_ON_CHECK>
<!-- Set position -->
<POS_OFF_CODE>#POS_OFF_CODE#</POS_OFF_CODE>
<POS_ON_CODE>#POS_ON_CODE#</POS_ON_CODE>
</ReturnParameters>
</ParametersFn>
<!-- ############################################################################## -->
</ModelBehaviors>
ParametersFn
ASOBO_Battery_State_Settings_Config
Definition from XML<ParametersFn Name="ASOBO_Battery_State_Settings_Config"> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Battery_Parameters"/> </Parameters> <ReturnParameters> <UseParametersFn Name="ASOBO_Auto_Define_XStates_Variant_Helper"/> <UseParametersFn Name="ASOBO_Watch_Simvar_Helper"> <SIMVAR>#SIMVAR_BATTERY_SWITCH#</SIMVAR> </UseParametersFn> <POS_OFF_CHECK>#GET_BATTERY_SWITCH# !</POS_OFF_CHECK> <POS_ON_CHECK>#GET_BATTERY_SWITCH#</POS_ON_CHECK> <POS_OFF_CODE>0 #SET_BATTERY#</POS_OFF_CODE> <POS_ON_CODE>1 #SET_BATTERY#</POS_ON_CODE> </ReturnParameters> </ParametersFn>Parameters initialization:
- Override
ParametersFn used:
Return parameters:
Parameters set:
- POS_OFF_CHECK (using GET_BATTERY_SWITCH)
- POS_ON_CHECK (using GET_BATTERY_SWITCH)
- POS_OFF_CODE (using SET_BATTERY)
- POS_ON_CODE (using SET_BATTERY)
ParametersFn used:
- ASOBO_Auto_Define_XStates_Variant_Helper
- ASOBO_Watch_Simvar_Helper
Parameters set:
- SIMVAR (using SIMVAR_BATTERY_SWITCH)
- Override
ASOBO_Circuit_Power_Settings_Config
Definition from XML<ParametersFn Name="ASOBO_Circuit_Power_Settings_Config"> <Parameters Type="Default"> <UseParametersFn Name="ASOBO_Circuit_Parameters"/> </Parameters> <ReturnParameters> <VALUE_TYPE>Percent</VALUE_TYPE> <IE_GET_STATE>#GET_CIRCUIT_POWER_SETTING#</IE_GET_STATE> <IE_SET_STATE>#SET_CIRCUIT_POWER_SETTING#</IE_SET_STATE> <UseParametersFn Name="ASOBO_Watch_Simvar_Helper"> <SIMVAR>#SIMVAR_CIRCUIT_POWER#</SIMVAR> </UseParametersFn> </ReturnParameters> </ParametersFn>Parameters initialization:
- Default
ParametersFn used:
Return parameters:
Parameters set:
- VALUE_TYPE
- IE_GET_STATE (using GET_CIRCUIT_POWER_SETTING)
- IE_SET_STATE (using SET_CIRCUIT_POWER_SETTING)
ParametersFn used:
- ASOBO_Watch_Simvar_Helper
Parameters set:
- SIMVAR (using SIMVAR_CIRCUIT_POWER)
- Default
ASOBO_Circuit_Switch_Settings_Config
Definition from XML<ParametersFn Name="ASOBO_Circuit_Switch_Settings_Config"> <Parameters Type="Default"> <UseParametersFn Name="ASOBO_Circuit_Parameters"/> </Parameters> <ReturnParameters> <UseParametersFn Name="ASOBO_Auto_Define_XStates_Variant_Helper"/> <UseParametersFn Name="ASOBO_Watch_Simvar_Helper"> <SIMVAR>#SIMVAR_CIRCUIT_ON#</SIMVAR> </UseParametersFn> <POS_OFF_CHECK>#GET_CIRCUIT_SWITCH# !</POS_OFF_CHECK> <POS_ON_CHECK>#GET_CIRCUIT_SWITCH#</POS_ON_CHECK> <POS_OFF_CODE>0 #SET_CIRCUIT#</POS_OFF_CODE> <POS_ON_CODE>1 #SET_CIRCUIT#</POS_ON_CODE> </ReturnParameters> </ParametersFn>Parameters initialization:
- Default
ParametersFn used:
Return parameters:
Parameters set:
- POS_OFF_CHECK (using GET_CIRCUIT_SWITCH)
- POS_ON_CHECK (using GET_CIRCUIT_SWITCH)
- POS_OFF_CODE (using SET_CIRCUIT)
- POS_ON_CODE (using SET_CIRCUIT)
ParametersFn used:
- ASOBO_Auto_Define_XStates_Variant_Helper
- ASOBO_Watch_Simvar_Helper
Parameters set:
- SIMVAR (using SIMVAR_CIRCUIT_ON)
- Default
ASOBO_Circuit_State_Settings_Config
Definition from XML<ParametersFn Name="ASOBO_Circuit_State_Settings_Config"> <Parameters Type="Default"> <UseParametersFn Name="ASOBO_Circuit_Connection_Parameters"/> </Parameters> <ReturnParameters> <UseParametersFn Name="ASOBO_Auto_Define_XStates_Variant_Helper"/> <UseParametersFn Name="ASOBO_Watch_Simvar_Helper"> <SIMVAR>#SIMVAR_CONNECTION#</SIMVAR> </UseParametersFn> <POS_OFF_CHECK>#GET_CONNECTION# !</POS_OFF_CHECK> <POS_ON_CHECK>#GET_CONNECTION#</POS_ON_CHECK> <POS_OFF_CODE>0 #SET_CONNECTION#</POS_OFF_CODE> <POS_ON_CODE>1 #SET_CONNECTION#</POS_ON_CODE> </ReturnParameters> </ParametersFn>Parameters initialization:
- Default
ParametersFn used:
Return parameters:
Parameters set:
- POS_OFF_CHECK (using GET_CONNECTION)
- POS_ON_CHECK (using GET_CONNECTION)
- POS_OFF_CODE (using SET_CONNECTION)
- POS_ON_CODE (using SET_CONNECTION)
ParametersFn used:
- ASOBO_Auto_Define_XStates_Variant_Helper
- ASOBO_Watch_Simvar_Helper
Parameters set:
- SIMVAR (using SIMVAR_CONNECTION)
- Default
ASOBO_Bus_State_Settings_Config
Definition from XML<ParametersFn Name="ASOBO_Bus_State_Settings_Config"> <Parameters Type="Default"> <UseParametersFn Name="ASOBO_Bus_Connection_Parameters"/> </Parameters> <ReturnParameters> <UseParametersFn Name="ASOBO_Auto_Define_XStates_Variant_Helper"/> <POS_OFF_CHECK>#GET_CONNECTION# !</POS_OFF_CHECK> <POS_ON_CHECK>#GET_CONNECTION#</POS_ON_CHECK> <POS_OFF_CODE>0 #SET_CONNECTION#</POS_OFF_CODE> <POS_ON_CODE>1 #SET_CONNECTION#</POS_ON_CODE> </ReturnParameters> </ParametersFn>Parameters initialization:
- Default
ParametersFn used:
Return parameters:
Parameters set:
- POS_OFF_CHECK (using GET_CONNECTION)
- POS_ON_CHECK (using GET_CONNECTION)
- POS_OFF_CODE (using SET_CONNECTION)
- POS_ON_CODE (using SET_CONNECTION)
ParametersFn used:
- Default
ASOBO_Bus_Swap_Settings_Config
Definition from XML<ParametersFn Name="ASOBO_Bus_Swap_Settings_Config"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <Parameters Type="Default"> <BUS_ID_1>#ID#</BUS_ID_1> <BUS_ID_2>#ID#</BUS_ID_2> </Parameters> <Parameters Type="Default"> <UseParametersFn Name="ASOBO_Bus_Connection_Parameters"> <BUS_ID>#BUS_ID_1#</BUS_ID> <OUT_PARAM_SUFFIX>_1</OUT_PARAM_SUFFIX> </UseParametersFn> <UseParametersFn Name="ASOBO_Bus_Connection_Parameters"> <BUS_ID>#BUS_ID_2#</BUS_ID> <OUT_PARAM_SUFFIX>_2</OUT_PARAM_SUFFIX> </UseParametersFn> </Parameters> <ReturnParameters> <UseParametersFn Name="ASOBO_Auto_Define_XStates_Variant_Helper"/> <POS_OFF_CHECK>#GET_1_CONNECTION# ! #GET_2_CONNECTION# and</POS_OFF_CHECK> <POS_ON_CHECK>#GET_1_CONNECTION# #GET_2_CONNECTION# ! and</POS_ON_CHECK> <POS_OFF_CODE>0 #SET_1_CONNECTION# 1 #SET_2_CONNECTION#</POS_OFF_CODE> <POS_ON_CODE>1 #SET_1_CONNECTION# 0 #SET_2_CONNECTION#</POS_ON_CODE> </ReturnParameters> </ParametersFn>Parameters initialization:
- Default
Parameters set:
- ID
- Default
Parameters set:
- BUS_ID_1 (using ID)
- BUS_ID_2 (using ID)
- Default
ParametersFn used:
- ASOBO_Bus_Connection_Parameters
Parameters set:
- BUS_ID (using BUS_ID_1)
- OUT_PARAM_SUFFIX
- ASOBO_Bus_Connection_Parameters
Parameters set:
- BUS_ID (using BUS_ID_2)
- OUT_PARAM_SUFFIX
- ASOBO_Bus_Connection_Parameters
Return parameters:
Parameters set:
- POS_OFF_CHECK (using GET_1_CONNECTION, GET_2_CONNECTION)
- POS_ON_CHECK (using GET_1_CONNECTION, GET_2_CONNECTION)
- POS_OFF_CODE (using SET_1_CONNECTION, SET_2_CONNECTION)
- POS_ON_CODE (using SET_1_CONNECTION, SET_2_CONNECTION)
ParametersFn used:
- Default
ASOBO_Generator_State_Settings_Config
Definition from XML<ParametersFn Name="ASOBO_Generator_State_Settings_Config"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <Parameters Type="Default"> <ALTERNATOR_ID>#ID#</ALTERNATOR_ID> </Parameters> <Parameters Type="Default"> <UseParametersFn Name="ASOBO_Alternator_Parameters"/> </Parameters> <ReturnParameters> <UseParametersFn Name="ASOBO_Auto_Define_XStates_Variant_Helper"/> <UseParametersFn Name="ASOBO_Watch_Simvar_Helper"> <SIMVAR>#SIMVAR_ALTERNATOR_SWITCH#</SIMVAR> </UseParametersFn> <POS_OFF_CHECK>#GET_ALTERNATOR_SWITCH# !</POS_OFF_CHECK> <POS_ON_CHECK>#GET_ALTERNATOR_SWITCH#</POS_ON_CHECK> <POS_OFF_CODE>0 #SET_ALTERNATOR#</POS_OFF_CODE> <POS_ON_CODE>1 #SET_ALTERNATOR#</POS_ON_CODE> </ReturnParameters> </ParametersFn>Parameters initialization:
- Default
Parameters set:
- ID
- Default
Parameters set:
- ALTERNATOR_ID (using ID)
- Default
ParametersFn used:
Return parameters:
Parameters set:
- POS_OFF_CHECK (using GET_ALTERNATOR_SWITCH)
- POS_ON_CHECK (using GET_ALTERNATOR_SWITCH)
- POS_OFF_CODE (using SET_ALTERNATOR)
- POS_ON_CODE (using SET_ALTERNATOR)
ParametersFn used:
- ASOBO_Auto_Define_XStates_Variant_Helper
- ASOBO_Watch_Simvar_Helper
Parameters set:
- SIMVAR (using SIMVAR_ALTERNATOR_SWITCH)
- Default
ASOBO_External_Power_State_Settings_Config
Definition from XML<ParametersFn Name="ASOBO_External_Power_State_Settings_Config"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <Parameters Type="Default"> <EXTERNAL_POWER_ID>#ID#</EXTERNAL_POWER_ID> </Parameters> <Parameters Type="Default"> <UseParametersFn Name="ASOBO_External_Power_Parameters"/> </Parameters> <ReturnParameters> <UseParametersFn Name="ASOBO_Auto_Define_XStates_Variant_Helper"/> <UseParametersFn Name="ASOBO_Watch_Simvar_Helper"> <SIMVAR>#SIMVAR_EXTERNAL_POWER_SWITCH#</SIMVAR> </UseParametersFn> <POS_OFF_CHECK>#GET_EXTERNAL_POWER_SWITCH# !</POS_OFF_CHECK> <POS_ON_CHECK>#GET_EXTERNAL_POWER_SWITCH#</POS_ON_CHECK> <POS_OFF_CODE>0 #SET_EXTERNAL_POWER#</POS_OFF_CODE> <POS_ON_CODE>1 #SET_EXTERNAL_POWER#</POS_ON_CODE> </ReturnParameters> </ParametersFn>Parameters initialization:
- Default
Parameters set:
- ID
- Default
Parameters set:
- EXTERNAL_POWER_ID (using ID)
- Default
ParametersFn used:
Return parameters:
Parameters set:
- POS_OFF_CHECK (using GET_EXTERNAL_POWER_SWITCH)
- POS_ON_CHECK (using GET_EXTERNAL_POWER_SWITCH)
- POS_OFF_CODE (using SET_EXTERNAL_POWER)
- POS_ON_CODE (using SET_EXTERNAL_POWER)
ParametersFn used:
- ASOBO_Auto_Define_XStates_Variant_Helper
- ASOBO_Watch_Simvar_Helper
Parameters set:
- SIMVAR (using SIMVAR_EXTERNAL_POWER_SWITCH)
- Default
ASOBO_APU_Generator_State_Settings_Config
Definition from XML<ParametersFn Name="ASOBO_APU_Generator_State_Settings_Config"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <Parameters Type="Default"> <APU_ID>#ID#</APU_ID> </Parameters> <Parameters Type="Default"> <UseParametersFn Name="ASOBO_APU_Generator_Parameters"/> </Parameters> <ReturnParameters> <UseParametersFn Name="ASOBO_Auto_Define_XStates_Variant_Helper"/> <UseParametersFn Name="ASOBO_Watch_Simvar_Helper"> <SIMVAR>#SIMVAR_APU_GENERATOR_SWITCH#</SIMVAR> </UseParametersFn> <POS_OFF_CHECK>#GET_APU_GENERATOR_SWITCH# !</POS_OFF_CHECK> <POS_ON_CHECK>#GET_APU_GENERATOR_SWITCH#</POS_ON_CHECK> <POS_OFF_CODE>0 #SET_APU_GENERATOR#</POS_OFF_CODE> <POS_ON_CODE>1 #SET_APU_GENERATOR#</POS_ON_CODE> </ReturnParameters> </ParametersFn>Parameters initialization:
- Default
Parameters set:
- ID
- Default
Parameters set:
- APU_ID (using ID)
- Default
ParametersFn used:
Return parameters:
Parameters set:
- POS_OFF_CHECK (using GET_APU_GENERATOR_SWITCH)
- POS_ON_CHECK (using GET_APU_GENERATOR_SWITCH)
- POS_OFF_CODE (using SET_APU_GENERATOR)
- POS_ON_CODE (using SET_APU_GENERATOR)
ParametersFn used:
- ASOBO_Auto_Define_XStates_Variant_Helper
- ASOBO_Watch_Simvar_Helper
Parameters set:
- SIMVAR (using SIMVAR_APU_GENERATOR_SWITCH)
- Default
ASOBO_Line_Connection_Settings_Config
Definition from XML<ParametersFn Name="ASOBO_Line_Connection_Settings_Config"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <Parameters Type="Default"> <LINE_ID>#ID#</LINE_ID> </Parameters> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Line_Connection_Parameters"/> </Parameters> <ReturnParameters> <UseParametersFn Name="ASOBO_Auto_Define_XStates_Variant_Helper"/> <UseParametersFn Name="ASOBO_Watch_Simvar_Helper"> <SIMVAR>#SIMVAR_CONNECTION#</SIMVAR> </UseParametersFn> <POS_OFF_CHECK>#GET_CONNECTION# !</POS_OFF_CHECK> <POS_ON_CHECK>#GET_CONNECTION#</POS_ON_CHECK> <POS_OFF_CODE>0 #SET_CONNECTION#</POS_OFF_CODE> <POS_ON_CODE>1 #SET_CONNECTION#</POS_ON_CODE> </ReturnParameters> </ParametersFn>Parameters initialization:
- Default
Parameters set:
- ID
- Default
Parameters set:
- LINE_ID (using ID)
- Override
ParametersFn used:
Return parameters:
Parameters set:
- POS_OFF_CHECK (using GET_CONNECTION)
- POS_ON_CHECK (using GET_CONNECTION)
- POS_OFF_CODE (using SET_CONNECTION)
- POS_ON_CODE (using SET_CONNECTION)
ParametersFn used:
- ASOBO_Auto_Define_XStates_Variant_Helper
- ASOBO_Watch_Simvar_Helper
Parameters set:
- SIMVAR (using SIMVAR_CONNECTION)
- Default
ASOBO_Line_Swap_Connection_Settings_Config
Definition from XML<ParametersFn Name="ASOBO_Line_Swap_Connection_Settings_Config"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <Parameters Type="Default"> <LINE_ID_1>#ID#</LINE_ID_1> <LINE_ID_2>#ID#</LINE_ID_2> </Parameters> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Line_Connection_Parameters"> <LINE_ID>#LINE_ID_1#</LINE_ID> <OUT_PARAM_SUFFIX>_1</OUT_PARAM_SUFFIX> </UseParametersFn> <UseParametersFn Name="ASOBO_Line_Connection_Parameters"> <LINE_ID>#LINE_ID_2#</LINE_ID> <OUT_PARAM_SUFFIX>_2</OUT_PARAM_SUFFIX> </UseParametersFn> </Parameters> <ReturnParameters> <UseParametersFn Name="ASOBO_Auto_Define_XStates_Variant_Helper"/> <UseParametersFn Name="ASOBO_Watch_Simvar_Helper"> <SIMVAR>#SIMVAR_1_CONNECTION#</SIMVAR> <SIMVAR>#SIMVAR_2_CONNECTION#</SIMVAR> </UseParametersFn> <POS_OFF_CHECK>#GET_1_CONNECTION# #GET_2_CONNECTION# ! and</POS_OFF_CHECK> <POS_ON_CHECK>#GET_1_CONNECTION# ! #GET_2_CONNECTION# and</POS_ON_CHECK> <POS_OFF_CODE>1 #SET_1_CONNECTION# 0 #SET_2_CONNECTION#</POS_OFF_CODE> <POS_ON_CODE>0 #SET_1_CONNECTION# 1 #SET_2_CONNECTION#</POS_ON_CODE> <UseParametersFn Name="ASOBO_Add_Update_Helper"> <UPDATE_CODE> 1 #SET_1_CONNECTION# 0 #SET_2_CONNECTION# </UPDATE_CODE> <UPDATE_ONCE>True</UPDATE_ONCE> </UseParametersFn> </ReturnParameters> </ParametersFn>Parameters initialization:
- Default
Parameters set:
- ID
- Default
Parameters set:
- LINE_ID_1 (using ID)
- LINE_ID_2 (using ID)
- Override
ParametersFn used:
- ASOBO_Line_Connection_Parameters
Parameters set:
- LINE_ID (using LINE_ID_1)
- OUT_PARAM_SUFFIX
- ASOBO_Line_Connection_Parameters
Parameters set:
- LINE_ID (using LINE_ID_2)
- OUT_PARAM_SUFFIX
- ASOBO_Line_Connection_Parameters
Return parameters:
Parameters set:
- POS_OFF_CHECK (using GET_1_CONNECTION, GET_2_CONNECTION)
- POS_ON_CHECK (using GET_1_CONNECTION, GET_2_CONNECTION)
- POS_OFF_CODE (using SET_1_CONNECTION, SET_2_CONNECTION)
- POS_ON_CODE (using SET_1_CONNECTION, SET_2_CONNECTION)
ParametersFn used:
- ASOBO_Auto_Define_XStates_Variant_Helper
- ASOBO_Watch_Simvar_Helper
Parameters set:
- SIMVAR (using SIMVAR_1_CONNECTION)
- SIMVAR (using SIMVAR_2_CONNECTION)
- ASOBO_Add_Update_Helper
Parameters set:
- UPDATE_CODE (using SET_1_CONNECTION, SET_2_CONNECTION)
- UPDATE_ONCE
- Default
ASOBO_Line_Breaker_Settings_Config
Definition from XML<ParametersFn Name="ASOBO_Line_Breaker_Settings_Config"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <Parameters Type="Default"> <LINE_ID>#ID#</LINE_ID> <FORWARD_INC_DEC_TO_IE>False</FORWARD_INC_DEC_TO_IE> </Parameters> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Line_Breaker_Parameters"/> </Parameters> <ReturnParameters> <UseParametersFn Name="ASOBO_Auto_Define_XStates_Variant_Helper"/> <UseParametersFn Name="ASOBO_Watch_Simvar_Helper"> <SIMVAR>#SIMVAR_BREAKER#</SIMVAR> </UseParametersFn> <POS_OFF_CHECK>#GET_BREAKER# !</POS_OFF_CHECK> <POS_ON_CHECK>#GET_BREAKER#</POS_ON_CHECK> <POS_OFF_CODE>0 #SET_BREAKER#</POS_OFF_CODE> <POS_ON_CODE>1 #SET_BREAKER#</POS_ON_CODE> <FORWARD_INC_DEC_TO_IE>#FORWARD_INC_DEC_TO_IE#</FORWARD_INC_DEC_TO_IE> </ReturnParameters> </ParametersFn>Parameters initialization:
- Default
Parameters set:
- ID
- Default
Parameters set:
- LINE_ID (using ID)
- FORWARD_INC_DEC_TO_IE
- Override
ParametersFn used:
Return parameters:
Parameters set:
- POS_OFF_CHECK (using GET_BREAKER)
- POS_ON_CHECK (using GET_BREAKER)
- POS_OFF_CODE (using SET_BREAKER)
- POS_ON_CODE (using SET_BREAKER)
- FORWARD_INC_DEC_TO_IE (using FORWARD_INC_DEC_TO_IE)
ParametersFn used:
- ASOBO_Auto_Define_XStates_Variant_Helper
- ASOBO_Watch_Simvar_Helper
Parameters set:
- SIMVAR (using SIMVAR_BREAKER)
- Default
ASOBO_Multiple_Line_Breaker_Settings_Config
Definition from XML<ParametersFn Name="ASOBO_Multiple_Line_Breaker_Settings_Config"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <Parameters Type="Default"> <LINE_ID>#ID#</LINE_ID> </Parameters> <Parameters Type="Override"> <POS_OFF_CHECK>1</POS_OFF_CHECK> <POS_ON_CHECK>1</POS_ON_CHECK> <POS_OFF_CODE/> <POS_ON_CODE/> </Parameters> <Parameters Type="Override"> <Loop> <Setup> <Param>CUR_ID</Param> <From>1</From> <Inc>1</Inc> <While> <Arg Check="LINE_ID_#CUR_ID#"/> </While> </Setup> <Do> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Line_Breaker_Parameters"> <LINE_ID Process="Param">LINE_ID_#CUR_ID#</LINE_ID> </UseParametersFn> </Parameters> <Parameters Type="Override" LifeTime="Loop"> <POS_OFF_CHECK>#POS_OFF_CHECK# #GET_BREAKER# ! and</POS_OFF_CHECK> <POS_ON_CHECK>#POS_ON_CHECK# #GET_BREAKER# and</POS_ON_CHECK> <POS_OFF_CODE>#POS_OFF_CODE# 0 #SET_BREAKER#</POS_OFF_CODE> <POS_ON_CODE>#POS_ON_CODE# 1 #SET_BREAKER#</POS_ON_CODE> <SIMVAR_#CUR_ID#>#SIMVAR_BREAKER#</SIMVAR_#CUR_ID#> </Parameters> </Do> </Loop> </Parameters> <ReturnParameters> <UseParametersFn Name="ASOBO_Auto_Define_XStates_Variant_Helper"/> <UseParametersFn Name="ASOBO_Watch_Simvar_Helper"> <Loop> <Setup> <Param>CUR_ID</Param> <From>1</From> <Inc>1</Inc> <While> <Arg Check="LINE_ID_#CUR_ID#"/> </While> </Setup> <Do> <SIMVAR Process="Param">SIMVAR_#CUR_ID#</SIMVAR> </Do> </Loop> </UseParametersFn> <POS_OFF_CHECK>#POS_OFF_CHECK#</POS_OFF_CHECK> <POS_ON_CHECK>#POS_ON_CHECK#</POS_ON_CHECK> <POS_OFF_CODE>#POS_OFF_CODE#</POS_OFF_CODE> <POS_ON_CODE>#POS_ON_CODE#</POS_ON_CODE> </ReturnParameters> </ParametersFn>Parameters initialization:
- Default
Parameters set:
- ID
- Default
Parameters set:
- LINE_ID (using ID)
- Override
Parameters set:
- POS_OFF_CHECK
- POS_ON_CHECK
- POS_OFF_CODE
- POS_ON_CODE
- Override
Parameters read:
- LINE_ID_#CUR_ID#
Parameters set:
- CUR_ID
- POS_OFF_CHECK (using POS_OFF_CHECK, GET_BREAKER)
- POS_ON_CHECK (using POS_ON_CHECK, GET_BREAKER)
- POS_OFF_CODE (using POS_OFF_CODE, SET_BREAKER)
- POS_ON_CODE (using POS_ON_CODE, SET_BREAKER)
- SIMVAR_#CUR_ID# (using SIMVAR_BREAKER)
ParametersFn used:
- ASOBO_Line_Breaker_Parameters
Parameters set:
- LINE_ID (using CUR_ID)
Return parameters:
Parameters set:
- POS_OFF_CHECK (using POS_OFF_CHECK)
- POS_ON_CHECK (using POS_ON_CHECK)
- POS_OFF_CODE (using POS_OFF_CODE)
- POS_ON_CODE (using POS_ON_CODE)
ParametersFn used:
- ASOBO_Auto_Define_XStates_Variant_Helper
- ASOBO_Watch_Simvar_Helper
Parameters read:
- LINE_ID_#CUR_ID#
Parameters set:
- CUR_ID
- SIMVAR (using CUR_ID)
- Default