Engine_Interactions

Asobo_EX1\Common\Interior\Templates\ParametersFn\InteractionPresets\Engine_Interactions.xml#

ParametersFn

• ASOBO_Throttle_Settings_Config#

  Definition from XML
  <ParametersFn Name="ASOBO_Throttle_Settings_Config"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <Parameters Type="Default"> <ENG_ID>#ID#</ENG_ID> <THROTTLE_MIN_VALUE_16K>0</THROTTLE_MIN_VALUE_16K> </Parameters> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Throttle_Parameters"/> </Parameters> <ReturnParameters> <VALUE_TYPE>U16K</VALUE_TYPE> <IE_GET_STATE>#GET_THROTTLE_16K#</IE_GET_STATE> <IE_SET_STATE>#SET_THROTTLE_16K#</IE_SET_STATE> <UseParametersFn Name="ASOBO_Watch_Simvar_Helper"> <SIMVAR>#SIMVAR_THROTTLE#</SIMVAR> </UseParametersFn> <SaveParameters ID="#IE_PARAMS#" Append="Default"> <TT_ENGINE_CATEGORY>THROTTLE</TT_ENGINE_CATEGORY> </SaveParameters> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Default

    Parameters set:

    • ID
  • Default

    Parameters set:

    • ENG_ID (using ID)
    • THROTTLE_MIN_VALUE_16K
  • Override

    ParametersFn used:

    • ASOBO_Throttle_Parameters

  Return parameters:

  Parameters read:

  • IE_PARAMS

  Parameters set:

  • VALUE_TYPE
  • IE_GET_STATE (using GET_THROTTLE_16K)
  • IE_SET_STATE (using SET_THROTTLE_16K)
  • TT_ENGINE_CATEGORY

  ParametersFn used:

  • ASOBO_Watch_Simvar_Helper

    Parameters set:

    • SIMVAR (using SIMVAR_THROTTLE)

• ASOBO_Throttle_With_Reverser_Settings_Config_Parameters#

  Definition from XML
  <ParametersFn Name="ASOBO_Throttle_With_Reverser_Settings_Config_Parameters"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <Parameters Type="Default"> <ENG_ID>#ID#</ENG_ID> <HAS_IDLE_GATE>True</HAS_IDLE_GATE> </Parameters> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Throttle_Parameters"/> </Parameters> <Parameters Type="Override"> <THROTTLE_MIN_VALUE_16K_PROCESSED Process="Float">#THROTTLE_MIN_VALUE_16K#</THROTTLE_MIN_VALUE_16K_PROCESSED> </Parameters> <Parameters Type="Override"> <FULL_RANGE Process="Float">#THROTTLE_MAX_VALUE_16K# #THROTTLE_MIN_VALUE_16K_PROCESSED# -</FULL_RANGE> <MIN_DIST>#THROTTLE_MIN_VALUE_16K_PROCESSED# abs</MIN_DIST> </Parameters> <Condition Valid="HAS_IDLE_GATE"> <Parameters Type="Default"> <IDLE_IE_PERCENT_SET Process="Float">#MIN_DIST# #FULL_RANGE# / 100 *</IDLE_IE_PERCENT_SET> <IDLE_ANIM_PERCENT>50</IDLE_ANIM_PERCENT> <IDLE_GATE_DIRECTION>Both</IDLE_GATE_DIRECTION> <GET_GATES>Throttle_Gates</GET_GATES> <GET_GATES_CONFIG>Throttle_Gates_Config</GET_GATES_CONFIG> <GET_POSITION_PCT_OVER_100>(B:#IE_PRESET_ID_UC#, percent over 100)</GET_POSITION_PCT_OVER_100> </Parameters> <Parameters Type="Override"> <SaveParameters ID="#GET_GATES#" Append="Default"> <POINT_0>Idle</POINT_0> </SaveParameters> <SaveParameters ID="#GET_GATES_CONFIG#" Append="Default"> <IDLE_IE_PERCENT_SET>#IDLE_IE_PERCENT_SET#</IDLE_IE_PERCENT_SET> <IDLE_ANIM_PERCENT>#IDLE_ANIM_PERCENT#</IDLE_ANIM_PERCENT> <IDLE_GATE_DIRECTION>#IDLE_GATE_DIRECTION#</IDLE_GATE_DIRECTION> </SaveParameters> <UseParametersFn Name="ASOBO_Gates_Input_Handling"> <INPUT_NAME>#IE_PRESET_ID_UC#_DEC</INPUT_NAME> <OUT_PARAM_NAME>ON_BEFORE_DEC_CODE_VALUE_SET</OUT_PARAM_NAME> </UseParametersFn> <UseParametersFn Name="ASOBO_Gates_Input_Handling"> <INPUT_NAME>#IE_PRESET_ID_UC#_INC</INPUT_NAME> <OUT_PARAM_NAME>ON_BEFORE_INC_CODE_VALUE_SET</OUT_PARAM_NAME> </UseParametersFn> </Parameters> </Condition> <ReturnParameters> <VALUE_TYPE>M16K</VALUE_TYPE> <MIN_VALUE>#THROTTLE_MIN_VALUE_16K_PROCESSED#</MIN_VALUE> <IE_GET_STATE>#GET_THROTTLE_16K#</IE_GET_STATE> <IE_SET_STATE>#SET_THROTTLE_16K#</IE_SET_STATE> <UseParametersFn Name="ASOBO_Watch_Simvar_Helper"> <SIMVAR>#SIMVAR_THROTTLE#</SIMVAR> </UseParametersFn> <Condition Valid="HAS_IDLE_GATE"> <PLOAD_AXIS_CURVE>#GET_GATES#</PLOAD_AXIS_CURVE> <PLOAD_AXIS_CURVE_CONFIG>#GET_GATES_CONFIG#</PLOAD_AXIS_CURVE_CONFIG> <UseParametersFn Name="ASOBO_Add_Update_Helper"> <UPDATE_ONCE>True</UPDATE_ONCE> <UPDATE_CODE>#GET_POSITION_PCT_OVER_100# sp0 #IS_AT_ANY_GATE_CHECK# if{ 1 #SET_CAN_BYPASS_GATE# }</UPDATE_CODE> </UseParametersFn> <ON_BEFORE_DEC_CODE_VALUE_SET>#ON_BEFORE_DEC_CODE_VALUE_SET#</ON_BEFORE_DEC_CODE_VALUE_SET> <ON_BEFORE_INC_CODE_VALUE_SET>#ON_BEFORE_INC_CODE_VALUE_SET#</ON_BEFORE_INC_CODE_VALUE_SET> </Condition> <SaveParameters ID="#IE_PARAMS#" Append="Default"> <TT_ENGINE_CATEGORY>THROTTLE</TT_ENGINE_CATEGORY> </SaveParameters> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Default

    Parameters set:

    • ID
  • Default

    Parameters set:

    • ENG_ID (using ID)
    • HAS_IDLE_GATE
  • Override

    ParametersFn used:

    • ASOBO_Throttle_Parameters
  • Override

    Parameters set:

    • THROTTLE_MIN_VALUE_16K_PROCESSED (using THROTTLE_MIN_VALUE_16K)
  • Override

    Parameters set:

    • FULL_RANGE (using THROTTLE_MAX_VALUE_16K, THROTTLE_MIN_VALUE_16K_PROCESSED)
    • MIN_DIST (using THROTTLE_MIN_VALUE_16K_PROCESSED)

  Return parameters:

  Parameters read:

  • IE_PARAMS

  Parameters set:

  • VALUE_TYPE
  • MIN_VALUE (using THROTTLE_MIN_VALUE_16K_PROCESSED)
  • IE_GET_STATE (using GET_THROTTLE_16K)
  • IE_SET_STATE (using SET_THROTTLE_16K)
  • TT_ENGINE_CATEGORY

  ParametersFn used:

  • ASOBO_Watch_Simvar_Helper

    Parameters set:

    • SIMVAR (using SIMVAR_THROTTLE)

  Condition: Valid(HAS_IDLE_GATE)

  • Case: True

    Parameters set:

    • PLOAD_AXIS_CURVE (using GET_GATES)
    • PLOAD_AXIS_CURVE_CONFIG (using GET_GATES_CONFIG)
    • ON_BEFORE_DEC_CODE_VALUE_SET (using ON_BEFORE_DEC_CODE_VALUE_SET)
    • ON_BEFORE_INC_CODE_VALUE_SET (using ON_BEFORE_INC_CODE_VALUE_SET)

    ParametersFn used:

    • ASOBO_Add_Update_Helper

      Parameters set:

      • UPDATE_ONCE
      • UPDATE_CODE (using GET_POSITION_PCT_OVER_100, IS_AT_ANY_GATE_CHECK, SET_CAN_BYPASS_GATE)

• ASOBO_Throttle_Reverser_Settings_Config#

  Definition from XML
  <ParametersFn Name="ASOBO_Throttle_Reverser_Settings_Config"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <Parameters Type="Default"> <ENG_ID>#ID#</ENG_ID> </Parameters> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Throttle_Parameters"/> </Parameters> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Get_MIN_MAX_Ratios_Helper"> <MIN_VALUE>#THROTTLE_MIN_VALUE_16K#</MIN_VALUE> <MAX_VALUE>#THROTTLE_MAX_VALUE_16K#</MAX_VALUE> </UseParametersFn> </Parameters> <ReturnParameters> <VALUE_TYPE>U16K</VALUE_TYPE> <MIN_VALUE>0</MIN_VALUE> <MAX_VALUE>@16K</MAX_VALUE> <IE_GET_STATE>#GET_THROTTLE_16K# #MIN_VALUE# / @16K *</IE_GET_STATE> <IE_SET_STATE>@16K / #MIN_VALUE# * #SET_THROTTLE_16K#</IE_SET_STATE> <UseParametersFn Name="ASOBO_Watch_Simvar_Helper"> <SIMVAR>#SIMVAR_THROTTLE#</SIMVAR> </UseParametersFn> <SaveParameters ID="#IE_PARAMS#" Append="Default"> <TT_ENGINE_CATEGORY>THROTTLE</TT_ENGINE_CATEGORY> </SaveParameters> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Default

    Parameters set:

    • ID
  • Default

    Parameters set:

    • ENG_ID (using ID)
  • Override

    ParametersFn used:

    • ASOBO_Throttle_Parameters
  • Override

    ParametersFn used:

    • ASOBO_Get_MIN_MAX_Ratios_Helper

      Parameters set:

      • MIN_VALUE (using THROTTLE_MIN_VALUE_16K)
      • MAX_VALUE (using THROTTLE_MAX_VALUE_16K)

  Return parameters:

  Parameters read:

  • IE_PARAMS

  Parameters set:

  • VALUE_TYPE
  • MIN_VALUE
  • MAX_VALUE
  • IE_GET_STATE (using GET_THROTTLE_16K, MIN_VALUE)
  • IE_SET_STATE (using MIN_VALUE, SET_THROTTLE_16K)
  • TT_ENGINE_CATEGORY

  ParametersFn used:

  • ASOBO_Watch_Simvar_Helper

    Parameters set:

    • SIMVAR (using SIMVAR_THROTTLE)

• ASOBO_Helicopter_Throttle_Settings_Config#

  Definition from XML
  <ParametersFn Name="ASOBO_Helicopter_Throttle_Settings_Config"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <Parameters Type="Default"> <ENG_ID>#ID#</ENG_ID> </Parameters> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Helicopter_Throttle_Parameters"/> </Parameters> <ReturnParameters> <VALUE_TYPE>U16K</VALUE_TYPE> <IE_GET_STATE>#GET_THROTTLE_16K#</IE_GET_STATE> <IE_SET_STATE>#SET_THROTTLE_16K#</IE_SET_STATE> <UseParametersFn Name="ASOBO_Watch_Simvar_Helper"> <SIMVAR>#SIMVAR_THROTTLE#</SIMVAR> </UseParametersFn> <SaveParameters ID="#IE_PARAMS#" Append="Default"> <TT_ENGINE_CATEGORY>THROTTLE</TT_ENGINE_CATEGORY> </SaveParameters> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Default

    Parameters set:

    • ID
  • Default

    Parameters set:

    • ENG_ID (using ID)
  • Override

    ParametersFn used:

    • ASOBO_Helicopter_Throttle_Parameters

  Return parameters:

  Parameters read:

  • IE_PARAMS

  Parameters set:

  • VALUE_TYPE
  • IE_GET_STATE (using GET_THROTTLE_16K)
  • IE_SET_STATE (using SET_THROTTLE_16K)
  • TT_ENGINE_CATEGORY

  ParametersFn used:

  • ASOBO_Watch_Simvar_Helper

    Parameters set:

    • SIMVAR (using SIMVAR_THROTTLE)

• ASOBO_Ignition_On_Off_Settings_Config_Parameters#

  Definition from XML
  <ParametersFn Name="ASOBO_Ignition_On_Off_Settings_Config_Parameters"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <Parameters Type="Default"> <ENG_ID>#ID#</ENG_ID> </Parameters> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Ignition_Parameters"/> </Parameters> <ReturnParameters> <UseParametersFn Name="ASOBO_Auto_Define_XStates_Variant_Helper"/> <UseParametersFn Name="ASOBO_Append_Init_Code_Helper"> <INIT_CODE>#GET_IGNITION_SWITCH# @Enum_Ignition_Auto == if{ @Enum_Ignition_On #SET_IGNITION_SWITCH# }</INIT_CODE> </UseParametersFn> <UseParametersFn Name="ASOBO_Watch_Simvar_Helper"> <SIMVAR>#SIMVAR_IGNITION_SWITCH#</SIMVAR> </UseParametersFn> <POS_OFF_CHECK>#GET_IGNITION_SWITCH# @Enum_Ignition_Off ==</POS_OFF_CHECK> <POS_ON_CHECK>#GET_IGNITION_SWITCH# @Enum_Ignition_On ==</POS_ON_CHECK> <POS_OFF_CODE>@Enum_Ignition_Off #SET_IGNITION_SWITCH#</POS_OFF_CODE> <POS_ON_CODE>@Enum_Ignition_On #SET_IGNITION_SWITCH#</POS_ON_CODE> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Default

    Parameters set:

    • ID
  • Default

    Parameters set:

    • ENG_ID (using ID)
  • Override

    ParametersFn used:

    • ASOBO_Ignition_Parameters

  Return parameters:

  Parameters set:

  • POS_OFF_CHECK (using GET_IGNITION_SWITCH)
  • POS_ON_CHECK (using GET_IGNITION_SWITCH)
  • POS_OFF_CODE (using SET_IGNITION_SWITCH)
  • POS_ON_CODE (using SET_IGNITION_SWITCH)

  ParametersFn used:

  • ASOBO_Auto_Define_XStates_Variant_Helper
  • ASOBO_Append_Init_Code_Helper

    Parameters set:

    • INIT_CODE (using GET_IGNITION_SWITCH, SET_IGNITION_SWITCH)
  • ASOBO_Watch_Simvar_Helper

    Parameters set:

    • SIMVAR (using SIMVAR_IGNITION_SWITCH)

• ASOBO_Ignition_Off_Auto_On_Settings_Config_Parameters#

  Definition from XML
  <ParametersFn Name="ASOBO_Ignition_Off_Auto_On_Settings_Config_Parameters"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <Parameters Type="Default"> <ENG_ID>#ID#</ENG_ID> </Parameters> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Ignition_Parameters"/> </Parameters> <ReturnParameters> <UseParametersFn Name="ASOBO_Auto_Define_XStates_Variant_Helper"/> <UseParametersFn Name="ASOBO_Watch_Simvar_Helper"> <SIMVAR>#SIMVAR_IGNITION_SWITCH#</SIMVAR> </UseParametersFn> <POS_OFF_CHECK>#GET_IGNITION_SWITCH# @Enum_Ignition_Off ==</POS_OFF_CHECK> <POS_AUTO_CHECK>#GET_IGNITION_SWITCH# @Enum_Ignition_Auto ==</POS_AUTO_CHECK> <POS_ON_CHECK>#GET_IGNITION_SWITCH# @Enum_Ignition_On ==</POS_ON_CHECK> <POS_OFF_CODE>@Enum_Ignition_Off #SET_IGNITION_SWITCH#</POS_OFF_CODE> <POS_AUTO_CODE>@Enum_Ignition_Auto #SET_IGNITION_SWITCH#</POS_AUTO_CODE> <POS_ON_CODE>@Enum_Ignition_On #SET_IGNITION_SWITCH#</POS_ON_CODE> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Default

    Parameters set:

    • ID
  • Default

    Parameters set:

    • ENG_ID (using ID)
  • Override

    ParametersFn used:

    • ASOBO_Ignition_Parameters

  Return parameters:

  Parameters set:

  • POS_OFF_CHECK (using GET_IGNITION_SWITCH)
  • POS_AUTO_CHECK (using GET_IGNITION_SWITCH)
  • POS_ON_CHECK (using GET_IGNITION_SWITCH)
  • POS_OFF_CODE (using SET_IGNITION_SWITCH)
  • POS_AUTO_CODE (using SET_IGNITION_SWITCH)
  • POS_ON_CODE (using SET_IGNITION_SWITCH)

  ParametersFn used:

  • ASOBO_Auto_Define_XStates_Variant_Helper
  • ASOBO_Watch_Simvar_Helper

    Parameters set:

    • SIMVAR (using SIMVAR_IGNITION_SWITCH)

• ASOBO_APU_On_Off_Settings_Config_Parameters#

  Definition from XML
  <ParametersFn Name="ASOBO_APU_On_Off_Settings_Config_Parameters"> <ReturnParameters> <UseParametersFn Name="ASOBO_Auto_Define_XStates_Variant_Helper"/> <UseParametersFn Name="ASOBO_Watch_Simvar_Helper"> <SIMVAR>APU SWITCH</SIMVAR> </UseParametersFn> <POS_OFF_CHECK>(A:APU SWITCH, Bool) !</POS_OFF_CHECK> <POS_ON_CHECK>(A:APU SWITCH, Bool)</POS_ON_CHECK> <POS_OFF_CODE>(&gt;K:APU_OFF_SWITCH)</POS_OFF_CODE> <POS_ON_CODE>(&gt;K:APU_STARTER)</POS_ON_CODE> </ReturnParameters> </ParametersFn>

  Return parameters:

  Parameters set:

  • POS_OFF_CHECK
  • POS_ON_CHECK
  • POS_OFF_CODE
  • POS_ON_CODE

  ParametersFn used:

  • ASOBO_Auto_Define_XStates_Variant_Helper
  • ASOBO_Watch_Simvar_Helper

    Parameters set:

    • SIMVAR

• ASOBO_APU_Off_On_Start_Settings_Config_Parameters#

  Definition from XML
  <ParametersFn Name="ASOBO_APU_Off_On_Start_Settings_Config_Parameters"> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Get_Enum_Parameters_Helper"> <SaveParameters ID="Enum_Values"> <POS_OFF>0</POS_OFF> <POS_ON>1</POS_ON> <POS_START>2</POS_START> </SaveParameters> </UseParametersFn> </Parameters> <Parameters Type="Default"> <APU_GEN_STATE_TIED_TO_APU_SWITCH>True</APU_GEN_STATE_TIED_TO_APU_SWITCH> </Parameters> <ReturnParameters> <UseParametersFn Name="ASOBO_Auto_Define_XStates_Variant_Helper"/> <UseParametersFn Name="ASOBO_Append_Init_Code_Helper"> <INIT_CODE>(A:APU SWITCH, Bool) ! #IS_POS_START# and (A:APU SWITCH, Bool) #IS_POS_OFF# and or if{ #SET_POS_ON# }</INIT_CODE> </UseParametersFn> <Condition Valid="APU_GEN_STATE_TIED_TO_APU_SWITCH"> <UseParametersFn Name="ASOBO_Append_Init_Code_Helper"> <INIT_CODE>(A:APU SWITCH, Bool) s0 (A:APU GENERATOR SWITCH, Bool) != if{ 0 l0 (&gt;K:2:APU_GENERATOR_SWITCH_SET) }</INIT_CODE> </UseParametersFn> </Condition> <UseParametersFn Name="ASOBO_Watch_Simvars_Helper"> <SaveParameters ID="Temp_Simvars_To_Watch"> <APU_SWITCH>APU SWITCH</APU_SWITCH> <Condition Valid="APU_GEN_STATE_TIED_TO_APU_SWITCH"> <APU_GEN_SIMVAR>APU GENERATOR SWITCH</APU_GEN_SIMVAR> </Condition> </SaveParameters> </UseParametersFn> <POS_OFF_CHECK>(A:APU SWITCH, Bool) ! #IS_POS_OFF# and</POS_OFF_CHECK> <POS_ON_CHECK>#IS_POS_ON#</POS_ON_CHECK> <POS_START_CHECK>(A:APU SWITCH, Bool) #IS_POS_START# and</POS_START_CHECK> <POS_OFF_CODE>(&gt;K:APU_OFF_SWITCH) #SET_POS_OFF#</POS_OFF_CODE> <POS_ON_CODE>#SET_POS_ON#</POS_ON_CODE> <POS_START_CODE>(&gt;K:APU_STARTER) #SET_POS_START#</POS_START_CODE> <POS_START_MOMENTARY_RELEASE_TARGET>On</POS_START_MOMENTARY_RELEASE_TARGET> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Override

    ParametersFn used:

    • ASOBO_Get_Enum_Parameters_Helper

      Parameters set:

      • POS_OFF
      • POS_ON
      • POS_START
  • Default

    Parameters set:

    • APU_GEN_STATE_TIED_TO_APU_SWITCH

  Return parameters:

  Parameters set:

  • POS_OFF_CHECK (using IS_POS_OFF)
  • POS_ON_CHECK (using IS_POS_ON)
  • POS_START_CHECK (using IS_POS_START)
  • POS_OFF_CODE (using SET_POS_OFF)
  • POS_ON_CODE (using SET_POS_ON)
  • POS_START_CODE (using SET_POS_START)
  • POS_START_MOMENTARY_RELEASE_TARGET

  ParametersFn used:

  • ASOBO_Auto_Define_XStates_Variant_Helper
  • ASOBO_Append_Init_Code_Helper

    Parameters set:

    • INIT_CODE (using IS_POS_START, IS_POS_OFF, SET_POS_ON)
  • ASOBO_Watch_Simvars_Helper

    Parameters set:

    • APU_SWITCH

    Condition: Valid(APU_GEN_STATE_TIED_TO_APU_SWITCH)

    • Case: True

      Parameters set:

      • APU_GEN_SIMVAR

  Condition: Valid(APU_GEN_STATE_TIED_TO_APU_SWITCH)

  • Case: True

    ParametersFn used:

    • ASOBO_Append_Init_Code_Helper

      Parameters set:

      • INIT_CODE

• ASOBO_Engine_Starter_Settings_Config#

  Definition from XML
  <ParametersFn Name="ASOBO_Engine_Starter_Settings_Config"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <Parameters Type="Default"> <ENG_ID>#ID#</ENG_ID> </Parameters> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Starter_Parameters"/> </Parameters> <ReturnParameters> <UseParametersFn Name="ASOBO_Auto_Define_XStates_Variant_Helper"/> <UseParametersFn Name="ASOBO_Watch_Simvar_Helper"> <SIMVAR>#SIMVAR_STARTER_SWITCH#</SIMVAR> </UseParametersFn> <POS_OFF_CHECK>#GET_STARTER_SWITCH# !</POS_OFF_CHECK> <POS_ON_CHECK>#GET_STARTER_SWITCH#</POS_ON_CHECK> <POS_OFF_CODE>0 #SET_STARTER_SWITCH#</POS_OFF_CODE> <POS_ON_CODE>1 #SET_STARTER_SWITCH#</POS_ON_CODE> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Default

    Parameters set:

    • ID
  • Default

    Parameters set:

    • ENG_ID (using ID)
  • Override

    ParametersFn used:

    • ASOBO_Starter_Parameters

  Return parameters:

  Parameters set:

  • POS_OFF_CHECK (using GET_STARTER_SWITCH)
  • POS_ON_CHECK (using GET_STARTER_SWITCH)
  • POS_OFF_CODE (using SET_STARTER_SWITCH)
  • POS_ON_CODE (using SET_STARTER_SWITCH)

  ParametersFn used:

  • ASOBO_Auto_Define_XStates_Variant_Helper
  • ASOBO_Watch_Simvar_Helper

    Parameters set:

    • SIMVAR (using SIMVAR_STARTER_SWITCH)

• ASOBO_Engine_Starter_Held_Settings_Config#

  Definition from XML
  <ParametersFn Name="ASOBO_Engine_Starter_Held_Settings_Config"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <Parameters Type="Default"> <ENG_ID>#ID#</ENG_ID> </Parameters> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Starter_Parameters"/> </Parameters> <ReturnParameters> <UseParametersFn Name="ASOBO_Auto_Define_XStates_Variant_Helper"/> <UseParametersFn Name="ASOBO_Watch_Simvar_Helper"> <SIMVAR>#SIMVAR_STARTER_SWITCH#</SIMVAR> </UseParametersFn> <POS_OFF_CHECK>#GET_STARTER_SWITCH# !</POS_OFF_CHECK> <POS_ON_CHECK>#GET_STARTER_SWITCH#</POS_ON_CHECK> <POS_OFF_CODE>0 #SET_STARTER_SWITCH_HELD#</POS_OFF_CODE> <POS_ON_CODE>1 #SET_STARTER_SWITCH_HELD#</POS_ON_CODE> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Default

    Parameters set:

    • ID
  • Default

    Parameters set:

    • ENG_ID (using ID)
  • Override

    ParametersFn used:

    • ASOBO_Starter_Parameters

  Return parameters:

  Parameters set:

  • POS_OFF_CHECK (using GET_STARTER_SWITCH)
  • POS_ON_CHECK (using GET_STARTER_SWITCH)
  • POS_OFF_CODE (using SET_STARTER_SWITCH_HELD)
  • POS_ON_CODE (using SET_STARTER_SWITCH_HELD)

  ParametersFn used:

  • ASOBO_Auto_Define_XStates_Variant_Helper
  • ASOBO_Watch_Simvar_Helper

    Parameters set:

    • SIMVAR (using SIMVAR_STARTER_SWITCH)

• ASOBO_Engine_Starter_Momentary_Settings_Config#

  Definition from XML
  <ParametersFn Name="ASOBO_Engine_Starter_Momentary_Settings_Config"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <Parameters Type="Default"> <ENG_ID>#ID#</ENG_ID> </Parameters> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Starter_Parameters"/> </Parameters> <ReturnParameters> <ON_EVENT>1 #SET_STARTER_SWITCH_HELD#</ON_EVENT> <ON_RELEASE>0 #SET_STARTER_SWITCH_HELD#</ON_RELEASE> <UseParametersFn Name="ASOBO_Watch_Simvar_Helper"> <SIMVAR>#SIMVAR_STARTER_SWITCH#</SIMVAR> </UseParametersFn> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Default

    Parameters set:

    • ID
  • Default

    Parameters set:

    • ENG_ID (using ID)
  • Override

    ParametersFn used:

    • ASOBO_Starter_Parameters

  Return parameters:

  Parameters set:

  • ON_EVENT (using SET_STARTER_SWITCH_HELD)
  • ON_RELEASE (using SET_STARTER_SWITCH_HELD)

  ParametersFn used:

  • ASOBO_Watch_Simvar_Helper

    Parameters set:

    • SIMVAR (using SIMVAR_STARTER_SWITCH)

• ASOBO_Engine_Master_Settings_Config#

  Definition from XML
  <ParametersFn Name="ASOBO_Engine_Master_Settings_Config"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <Parameters Type="Default"> <ENG_ID>#ID#</ENG_ID> </Parameters> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Engine_Master_Parameters"/> </Parameters> <ReturnParameters> <UseParametersFn Name="ASOBO_Auto_Define_XStates_Variant_Helper"/> <UseParametersFn Name="ASOBO_Watch_Simvar_Helper"> <SIMVAR>#SIMVAR_ENGINE_MASTER_SWITCH#</SIMVAR> </UseParametersFn> <POS_OFF_CHECK>#GET_ENGINE_MASTER_SWITCH# !</POS_OFF_CHECK> <POS_ON_CHECK>#GET_ENGINE_MASTER_SWITCH#</POS_ON_CHECK> <POS_OFF_CODE>0 #SET_ENGINE_MASTER_SWITCH#</POS_OFF_CODE> <POS_ON_CODE>1 #SET_ENGINE_MASTER_SWITCH#</POS_ON_CODE> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Default

    Parameters set:

    • ID
  • Default

    Parameters set:

    • ENG_ID (using ID)
  • Override

    ParametersFn used:

    • ASOBO_Engine_Master_Parameters

  Return parameters:

  Parameters set:

  • POS_OFF_CHECK (using GET_ENGINE_MASTER_SWITCH)
  • POS_ON_CHECK (using GET_ENGINE_MASTER_SWITCH)
  • POS_OFF_CODE (using SET_ENGINE_MASTER_SWITCH)
  • POS_ON_CODE (using SET_ENGINE_MASTER_SWITCH)

  ParametersFn used:

  • ASOBO_Auto_Define_XStates_Variant_Helper
  • ASOBO_Watch_Simvar_Helper

    Parameters set:

    • SIMVAR (using SIMVAR_ENGINE_MASTER_SWITCH)

• ASOBO_Engine_Mixture_Settings_Config#

  Definition from XML
  <ParametersFn Name="ASOBO_Engine_Mixture_Settings_Config"> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Engine_Mixture_Parameters"/> </Parameters> <ReturnParameters> <VALUE_TYPE>U16K</VALUE_TYPE> <MIN_VALUE>0</MIN_VALUE> <MAX_VALUE>@16K</MAX_VALUE> <IE_GET_STATE>#GET_ENGINE_MIXTURE# @16K *</IE_GET_STATE> <IE_SET_STATE>#SET_ENGINE_MIXTURE_16K#</IE_SET_STATE> <UseParametersFn Name="ASOBO_Watch_Simvar_Helper"> <SIMVAR>#SIMVAR_ENGINE_MIXTURE#</SIMVAR> </UseParametersFn> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Override

    ParametersFn used:

    • ASOBO_Engine_Mixture_Parameters

  Return parameters:

  Parameters set:

  • VALUE_TYPE
  • MIN_VALUE
  • MAX_VALUE
  • IE_GET_STATE (using GET_ENGINE_MIXTURE)
  • IE_SET_STATE (using SET_ENGINE_MIXTURE_16K)

  ParametersFn used:

  • ASOBO_Watch_Simvar_Helper

    Parameters set:

    • SIMVAR (using SIMVAR_ENGINE_MIXTURE)

• ASOBO_Mixture_Cutoff_Settings_Config#

  Definition from XML
  <ParametersFn Name="ASOBO_Mixture_Cutoff_Settings_Config"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <Parameters Type="Default"> <ENG_ID>#ID#</ENG_ID> </Parameters> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Engine_Mixture_Parameters"> <UNITS_HANDLE_POSITION>position 16k</UNITS_HANDLE_POSITION> </UseParametersFn> </Parameters> <Parameters Type="Default"> <IDLE_IE_PERCENT_SET>1</IDLE_IE_PERCENT_SET> <IDLE_ANIM_PERCENT>50</IDLE_ANIM_PERCENT> <IDLE_GATE_DIRECTION>Both</IDLE_GATE_DIRECTION> </Parameters> <ReturnParameters> <VALUE_TYPE>U16K</VALUE_TYPE> <IE_GET_STATE>#GET_ENGINE_MIXTURE#</IE_GET_STATE> <IE_SET_STATE>#SET_ENGINE_MIXTURE_16K#</IE_SET_STATE> <UseParametersFn Name="ASOBO_Watch_Simvar_Helper"> <SIMVAR>#SIMVAR_ENGINE_MIXTURE#</SIMVAR> </UseParametersFn> <PLOAD_AXIS_CURVE>Mixture_Gates</PLOAD_AXIS_CURVE> <PLOAD_AXIS_CURVE_CONFIG>Mixture_Gates_Config</PLOAD_AXIS_CURVE_CONFIG> <SaveParameters ID="Mixture_Gates" Append="Default"> <POINT_0>Idle</POINT_0> </SaveParameters> <SaveParameters ID="Mixture_Gates_Config" Append="Default"> <IDLE_IE_PERCENT_SET>#IDLE_IE_PERCENT_SET#</IDLE_IE_PERCENT_SET> <IDLE_ANIM_PERCENT>#IDLE_ANIM_PERCENT#</IDLE_ANIM_PERCENT> <IDLE_GATE_DIRECTION>#IDLE_GATE_DIRECTION#</IDLE_GATE_DIRECTION> </SaveParameters> <SaveParameters ID="#IE_PARAMS#" Append="Default"> <TT_ENGINE_CATEGORY>MIXTURE</TT_ENGINE_CATEGORY> </SaveParameters> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Default

    Parameters set:

    • ID
  • Default

    Parameters set:

    • ENG_ID (using ID)
  • Override

    ParametersFn used:

    • ASOBO_Engine_Mixture_Parameters

      Parameters set:

      • UNITS_HANDLE_POSITION
  • Default

    Parameters set:

    • IDLE_IE_PERCENT_SET
    • IDLE_ANIM_PERCENT
    • IDLE_GATE_DIRECTION

  Return parameters:

  Parameters read:

  • IE_PARAMS

  Parameters set:

  • VALUE_TYPE
  • IE_GET_STATE (using GET_ENGINE_MIXTURE)
  • IE_SET_STATE (using SET_ENGINE_MIXTURE_16K)
  • PLOAD_AXIS_CURVE
  • PLOAD_AXIS_CURVE_CONFIG
  • POINT_0
  • IDLE_IE_PERCENT_SET (using IDLE_IE_PERCENT_SET)
  • IDLE_ANIM_PERCENT (using IDLE_ANIM_PERCENT)
  • IDLE_GATE_DIRECTION (using IDLE_GATE_DIRECTION)
  • TT_ENGINE_CATEGORY

  ParametersFn used:

  • ASOBO_Watch_Simvar_Helper

    Parameters set:

    • SIMVAR (using SIMVAR_ENGINE_MIXTURE)

• ASOBO_Propeller_Settings_Config#

  Definition from XML
  <ParametersFn Name="ASOBO_Propeller_Settings_Config"> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Propeller_Parameters"/> </Parameters> <ReturnParameters> <VALUE_TYPE>U16K</VALUE_TYPE> <MIN_VALUE>0</MIN_VALUE> <MAX_VALUE>@16K</MAX_VALUE> <IE_GET_STATE>#GET_PROPELLER# @16K *</IE_GET_STATE> <IE_SET_STATE>#SET_PROPELLER_16K#</IE_SET_STATE> <UseParametersFn Name="ASOBO_Watch_Simvar_Helper"> <SIMVAR>#SIMVAR_PROPELLER#</SIMVAR> </UseParametersFn> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Override

    ParametersFn used:

    • ASOBO_Propeller_Parameters

  Return parameters:

  Parameters set:

  • VALUE_TYPE
  • MIN_VALUE
  • MAX_VALUE
  • IE_GET_STATE (using GET_PROPELLER)
  • IE_SET_STATE (using SET_PROPELLER_16K)

  ParametersFn used:

  • ASOBO_Watch_Simvar_Helper

    Parameters set:

    • SIMVAR (using SIMVAR_PROPELLER)

• ASOBO_Propeller_Reverser_Settings_Config#

  Definition from XML
  <ParametersFn Name="ASOBO_Propeller_Reverser_Settings_Config"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <Parameters Type="Default"> <PROP_ID>#ID#</PROP_ID> </Parameters> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Propeller_Parameters"/> </Parameters> <Parameters Type="Override"> <PROPELLER_MIN_VALUE_16K_PROCESSED Process="Float">#PROPELLER_MIN_VALUE_16K#</PROPELLER_MIN_VALUE_16K_PROCESSED> </Parameters> <Parameters Type="Override"> <FULL_RANGE Process="Float">#PROPELLER_MAX_VALUE_16K# #PROPELLER_MIN_VALUE_16K_PROCESSED# -</FULL_RANGE> <MIN_DIST Process="Float">0 #PROPELLER_MIN_VALUE_16K_PROCESSED# - abs</MIN_DIST> </Parameters> <Parameters Type="Default"> <IDLE_IE_PERCENT_SET Process="Float">#MIN_DIST# #FULL_RANGE# / 100 *</IDLE_IE_PERCENT_SET> <IDLE_ANIM_PERCENT>50</IDLE_ANIM_PERCENT> <IDLE_GATE_DIRECTION>Both</IDLE_GATE_DIRECTION> </Parameters> <ReturnParameters> <VALUE_TYPE>M16K</VALUE_TYPE> <MIN_VALUE>#PROPELLER_MIN_VALUE_16K_PROCESSED#</MIN_VALUE> <IE_GET_STATE>#GET_PROPELLER_16K#</IE_GET_STATE> <IE_SET_STATE>#SET_PROPELLER_16K#</IE_SET_STATE> <UseParametersFn Name="ASOBO_Watch_Simvar_Helper"> <SIMVAR>#SIMVAR_PROPELLER#</SIMVAR> </UseParametersFn> <PLOAD_AXIS_CURVE>Propeller_Gates</PLOAD_AXIS_CURVE> <PLOAD_AXIS_CURVE_CONFIG>Propeller_Gates_Config</PLOAD_AXIS_CURVE_CONFIG> <SaveParameters ID="Propeller_Gates" Append="Default"> <POINT_0>Idle</POINT_0> </SaveParameters> <SaveParameters ID="Propeller_Gates_Config" Append="Default"> <IDLE_IE_PERCENT_SET>#IDLE_IE_PERCENT_SET#</IDLE_IE_PERCENT_SET> <IDLE_ANIM_PERCENT>#IDLE_ANIM_PERCENT#</IDLE_ANIM_PERCENT> <IDLE_GATE_DIRECTION>#IDLE_GATE_DIRECTION#</IDLE_GATE_DIRECTION> </SaveParameters> <SaveParameters ID="#IE_PARAMS#" Append="Default"> <TT_ENGINE_CATEGORY>PROPELLER</TT_ENGINE_CATEGORY> </SaveParameters> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Default

    Parameters set:

    • ID
  • Default

    Parameters set:

    • PROP_ID (using ID)
  • Override

    ParametersFn used:

    • ASOBO_Propeller_Parameters
  • Override

    Parameters set:

    • PROPELLER_MIN_VALUE_16K_PROCESSED (using PROPELLER_MIN_VALUE_16K)
  • Override

    Parameters set:

    • FULL_RANGE (using PROPELLER_MAX_VALUE_16K, PROPELLER_MIN_VALUE_16K_PROCESSED)
    • MIN_DIST (using PROPELLER_MIN_VALUE_16K_PROCESSED)
  • Default

    Parameters set:

    • IDLE_IE_PERCENT_SET (using MIN_DIST, FULL_RANGE)
    • IDLE_ANIM_PERCENT
    • IDLE_GATE_DIRECTION

  Return parameters:

  Parameters read:

  • IE_PARAMS

  Parameters set:

  • VALUE_TYPE
  • MIN_VALUE (using PROPELLER_MIN_VALUE_16K_PROCESSED)
  • IE_GET_STATE (using GET_PROPELLER_16K)
  • IE_SET_STATE (using SET_PROPELLER_16K)
  • PLOAD_AXIS_CURVE
  • PLOAD_AXIS_CURVE_CONFIG
  • POINT_0
  • IDLE_IE_PERCENT_SET (using IDLE_IE_PERCENT_SET)
  • IDLE_ANIM_PERCENT (using IDLE_ANIM_PERCENT)
  • IDLE_GATE_DIRECTION (using IDLE_GATE_DIRECTION)
  • TT_ENGINE_CATEGORY

  ParametersFn used:

  • ASOBO_Watch_Simvar_Helper

    Parameters set:

    • SIMVAR (using SIMVAR_PROPELLER)

• ASOBO_Engine_Magneto_Settings_Config#

  Definition from XML
  <ParametersFn Name="ASOBO_Engine_Magneto_Settings_Config"> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Engine_Magneto_Parameters"/> </Parameters> <ReturnParameters> <UseParametersFn Name="ASOBO_Auto_Define_XStates_Variant_Helper"/> <UseParametersFn Name="ASOBO_Watch_Simvar_Helper"> <SIMVAR>#SIMVAR_ENG_LEFT_MAGNETO_SWITCH#</SIMVAR> </UseParametersFn> <UseParametersFn Name="ASOBO_Watch_Simvar_Helper"> <SIMVAR>#SIMVAR_ENG_RIGHT_MAGNETO_SWITCH#</SIMVAR> </UseParametersFn> <POS_OFF_CHECK>#IS_ENG_MAGNETO_SWITCH_OFF#</POS_OFF_CHECK> <POS_RIGHT_CHECK>#IS_ENG_MAGNETO_SWITCH_RIGHT#</POS_RIGHT_CHECK> <POS_LEFT_CHECK>#IS_ENG_MAGNETO_SWITCH_LEFT#</POS_LEFT_CHECK> <POS_BOTH_CHECK>#IS_ENG_MAGNETO_SWITCH_BOTH#</POS_BOTH_CHECK> <POS_START_CHECK>#IS_ENG_MAGNETO_SWITCH_START#</POS_START_CHECK> <POS_OFF_CODE>#SET_ENG_MAGNETO_SWITCH_OFF#</POS_OFF_CODE> <POS_RIGHT_CODE>#SET_ENG_MAGNETO_SWITCH_RIGHT#</POS_RIGHT_CODE> <POS_LEFT_CODE>#SET_ENG_MAGNETO_SWITCH_LEFT#</POS_LEFT_CODE> <POS_BOTH_CODE>#SET_ENG_MAGNETO_SWITCH_BOTH#</POS_BOTH_CODE> <POS_START_CODE>#SET_ENG_MAGNETO_SWITCH_START#</POS_START_CODE> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Override

    ParametersFn used:

    • ASOBO_Engine_Magneto_Parameters

  Return parameters:

  Parameters set:

  • POS_OFF_CHECK (using IS_ENG_MAGNETO_SWITCH_OFF)
  • POS_RIGHT_CHECK (using IS_ENG_MAGNETO_SWITCH_RIGHT)
  • POS_LEFT_CHECK (using IS_ENG_MAGNETO_SWITCH_LEFT)
  • POS_BOTH_CHECK (using IS_ENG_MAGNETO_SWITCH_BOTH)
  • POS_START_CHECK (using IS_ENG_MAGNETO_SWITCH_START)
  • POS_OFF_CODE (using SET_ENG_MAGNETO_SWITCH_OFF)
  • POS_RIGHT_CODE (using SET_ENG_MAGNETO_SWITCH_RIGHT)
  • POS_LEFT_CODE (using SET_ENG_MAGNETO_SWITCH_LEFT)
  • POS_BOTH_CODE (using SET_ENG_MAGNETO_SWITCH_BOTH)
  • POS_START_CODE (using SET_ENG_MAGNETO_SWITCH_START)

  ParametersFn used:

  • ASOBO_Auto_Define_XStates_Variant_Helper
  • ASOBO_Watch_Simvar_Helper

    Parameters set:

    • SIMVAR (using SIMVAR_ENG_LEFT_MAGNETO_SWITCH)
  • ASOBO_Watch_Simvar_Helper

    Parameters set:

    • SIMVAR (using SIMVAR_ENG_RIGHT_MAGNETO_SWITCH)

• ASOBO_Engine_Plasma_Settings_Config#

  Definition from XML
  <ParametersFn Name="ASOBO_Engine_Plasma_Settings_Config"> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Engine_Plasma_Parameters"/> </Parameters> <ReturnParameters> <UseParametersFn Name="ASOBO_Auto_Define_XStates_Variant_Helper"/> <UseParametersFn Name="ASOBO_Watch_Simvar_Helper"> <SIMVAR>#SIMVAR_ENG_MAGNETO_PLASMA_SWITCH#</SIMVAR> </UseParametersFn> <POS_OFF_CHECK>#GET_ENG_MAGNETO_PLASMA_SWITCH# !</POS_OFF_CHECK> <POS_ON_CHECK>#GET_ENG_MAGNETO_PLASMA_SWITCH#</POS_ON_CHECK> <POS_OFF_CODE>0 #SET_ENG_MAGNETO_PLASMA_SWITCH#</POS_OFF_CODE> <POS_ON_CODE>1 #SET_ENG_MAGNETO_PLASMA_SWITCH#</POS_ON_CODE> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Override

    ParametersFn used:

    • ASOBO_Engine_Plasma_Parameters

  Return parameters:

  Parameters set:

  • POS_OFF_CHECK (using GET_ENG_MAGNETO_PLASMA_SWITCH)
  • POS_ON_CHECK (using GET_ENG_MAGNETO_PLASMA_SWITCH)
  • POS_OFF_CODE (using SET_ENG_MAGNETO_PLASMA_SWITCH)
  • POS_ON_CODE (using SET_ENG_MAGNETO_PLASMA_SWITCH)

  ParametersFn used:

  • ASOBO_Auto_Define_XStates_Variant_Helper
  • ASOBO_Watch_Simvar_Helper

    Parameters set:

    • SIMVAR (using SIMVAR_ENG_MAGNETO_PLASMA_SWITCH)

• ASOBO_ROTOR_Clutch_Settings_Config#

  Definition from XML
  <ParametersFn Name="ASOBO_ROTOR_Clutch_Settings_Config"> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_ROTOR_Clutch_Parameters"/> </Parameters> <ReturnParameters> <UseParametersFn Name="ASOBO_Auto_Define_XStates_Variant_Helper"/> <UseParametersFn Name="ASOBO_Watch_Simvar_Helper"> <SIMVAR>#SIMVAR_ROTOR_CLUTCH_SWITCH#</SIMVAR> </UseParametersFn> <POS_OFF_CHECK>#GET_ROTOR_CLUTCH_SWITCH# !</POS_OFF_CHECK> <POS_ON_CHECK>#GET_ROTOR_CLUTCH_SWITCH#</POS_ON_CHECK> <POS_OFF_CODE>0 #SET_ROTOR_CLUTCH_SWITCH#</POS_OFF_CODE> <POS_ON_CODE>1 #SET_ROTOR_CLUTCH_SWITCH#</POS_ON_CODE> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Override

    ParametersFn used:

    • ASOBO_ROTOR_Clutch_Parameters

  Return parameters:

  Parameters set:

  • POS_OFF_CHECK (using GET_ROTOR_CLUTCH_SWITCH)
  • POS_ON_CHECK (using GET_ROTOR_CLUTCH_SWITCH)
  • POS_OFF_CODE (using SET_ROTOR_CLUTCH_SWITCH)
  • POS_ON_CODE (using SET_ROTOR_CLUTCH_SWITCH)

  ParametersFn used:

  • ASOBO_Auto_Define_XStates_Variant_Helper
  • ASOBO_Watch_Simvar_Helper

    Parameters set:

    • SIMVAR (using SIMVAR_ROTOR_CLUTCH_SWITCH)

• ASOBO_ROTOR_Governor_Settings_Config#

  Definition from XML
  <ParametersFn Name="ASOBO_ROTOR_Governor_Settings_Config"> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_ROTOR_Governor_Parameters"/> </Parameters> <ReturnParameters> <UseParametersFn Name="ASOBO_Auto_Define_XStates_Variant_Helper"/> <UseParametersFn Name="ASOBO_Watch_Simvar_Helper"> <SIMVAR>#SIMVAR_ROTOR_GOV_SWITCH#</SIMVAR> </UseParametersFn> <POS_OFF_CHECK>#GET_ROTOR_GOV_SWITCH# !</POS_OFF_CHECK> <POS_ON_CHECK>#GET_ROTOR_GOV_SWITCH#</POS_ON_CHECK> <POS_OFF_CODE>0 #SET_ROTOR_GOV_SWITCH#</POS_OFF_CODE> <POS_ON_CODE>1 #SET_ROTOR_GOV_SWITCH#</POS_ON_CODE> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Override

    ParametersFn used:

    • ASOBO_ROTOR_Governor_Parameters

  Return parameters:

  Parameters set:

  • POS_OFF_CHECK (using GET_ROTOR_GOV_SWITCH)
  • POS_ON_CHECK (using GET_ROTOR_GOV_SWITCH)
  • POS_OFF_CODE (using SET_ROTOR_GOV_SWITCH)
  • POS_ON_CODE (using SET_ROTOR_GOV_SWITCH)

  ParametersFn used:

  • ASOBO_Auto_Define_XStates_Variant_Helper
  • ASOBO_Watch_Simvar_Helper

    Parameters set:

    • SIMVAR (using SIMVAR_ROTOR_GOV_SWITCH)

• ASOBO_ROTOR_Collective_Settings_Config#

  Definition from XML
  <ParametersFn Name="ASOBO_ROTOR_Collective_Settings_Config"> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_ROTOR_Collective_Parameters"/> </Parameters> <ReturnParameters> <VALUE_TYPE>U16K</VALUE_TYPE> <MIN_VALUE>0</MIN_VALUE> <MAX_VALUE>@16K</MAX_VALUE> <IE_GET_STATE>#GET_ROTOR_COLLECTIVE_HANDLE# @16K *</IE_GET_STATE> <IE_SET_STATE>#SET_ROTOR_COLLECTIVE_HANDLE_16K#</IE_SET_STATE> <UseParametersFn Name="ASOBO_Watch_Simvar_Helper"> <SIMVAR>#SIMVAR_ROTOR_COLLECTIVE_HANDLE#</SIMVAR> </UseParametersFn> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Override

    ParametersFn used:

    • ASOBO_ROTOR_Collective_Parameters

  Return parameters:

  Parameters set:

  • VALUE_TYPE
  • MIN_VALUE
  • MAX_VALUE
  • IE_GET_STATE (using GET_ROTOR_COLLECTIVE_HANDLE)
  • IE_SET_STATE (using SET_ROTOR_COLLECTIVE_HANDLE_16K)

  ParametersFn used:

  • ASOBO_Watch_Simvar_Helper

    Parameters set:

    • SIMVAR (using SIMVAR_ROTOR_COLLECTIVE_HANDLE)

• ASOBO_ROTOR_Brake_Settings_Config#

  Definition from XML
  <ParametersFn Name="ASOBO_ROTOR_Brake_Settings_Config"> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_ROTOR_Brake_Parameters"/> </Parameters> <ReturnParameters> <VALUE_TYPE>U16K</VALUE_TYPE> <MIN_VALUE>0</MIN_VALUE> <MAX_VALUE>@16K</MAX_VALUE> <IE_GET_STATE>#GET_ROTOR_BRAKE_HANDLE# @16K *</IE_GET_STATE> <IE_SET_STATE>#SET_ROTOR_BRAKE_HANDLE_16K#</IE_SET_STATE> <UseParametersFn Name="ASOBO_Watch_Simvar_Helper"> <SIMVAR>#SIMVAR_ROTOR_BRAKE_HANDLE#</SIMVAR> </UseParametersFn> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Override

    ParametersFn used:

    • ASOBO_ROTOR_Brake_Parameters

  Return parameters:

  Parameters set:

  • VALUE_TYPE
  • MIN_VALUE
  • MAX_VALUE
  • IE_GET_STATE (using GET_ROTOR_BRAKE_HANDLE)
  • IE_SET_STATE (using SET_ROTOR_BRAKE_HANDLE_16K)

  ParametersFn used:

  • ASOBO_Watch_Simvar_Helper

    Parameters set:

    • SIMVAR (using SIMVAR_ROTOR_BRAKE_HANDLE)

• ASOBO_ROTOR_Brake_Lock_Settings_Config#

  Definition from XML
  <ParametersFn Name="ASOBO_ROTOR_Brake_Lock_Settings_Config"> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_ROTOR_Brake_Lock_Parameters"/> </Parameters> <ReturnParameters> <UseParametersFn Name="ASOBO_Auto_Define_XStates_Variant_Helper"/> <UseParametersFn Name="ASOBO_Watch_Simvar_Helper"> <SIMVAR>#SIMVAR_ROTOR_BRAKE_LOCK_SWITCH#</SIMVAR> </UseParametersFn> <POS_OFF_CHECK>#GET_ROTOR_BRAKE_LOCK# !</POS_OFF_CHECK> <POS_ON_CHECK>#GET_ROTOR_BRAKE_LOCK#</POS_ON_CHECK> <POS_OFF_CODE>#SET_ROTOR_BRAKE_LOCK_OFF#</POS_OFF_CODE> <POS_ON_CODE>#SET_ROTOR_BRAKE_LOCK_ON#</POS_ON_CODE> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Override

    ParametersFn used:

    • ASOBO_ROTOR_Brake_Lock_Parameters

  Return parameters:

  Parameters set:

  • POS_OFF_CHECK (using GET_ROTOR_BRAKE_LOCK)
  • POS_ON_CHECK (using GET_ROTOR_BRAKE_LOCK)
  • POS_OFF_CODE (using SET_ROTOR_BRAKE_LOCK_OFF)
  • POS_ON_CODE (using SET_ROTOR_BRAKE_LOCK_ON)

  ParametersFn used:

  • ASOBO_Auto_Define_XStates_Variant_Helper
  • ASOBO_Watch_Simvar_Helper

    Parameters set:

    • SIMVAR (using SIMVAR_ROTOR_BRAKE_LOCK_SWITCH)