Handling_Interactions

Asobo_EX1\Common\Interior\Templates\ParametersFn\InteractionPresets\Handling_Interactions.xml#

ParametersFn

• ASOBO_Flaps_Settings_Config#

  Definition from XML
  <ParametersFn Name="ASOBO_Flaps_Settings_Config"> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Flaps_Lever_Parameters"/> </Parameters> <ReturnParameters> <UseParametersFn Name="ASOBO_Auto_Define_XStates_Variant_Helper"/> <XSTATES_TYPE>NUMERICAL</XSTATES_TYPE> <FORMAT_POSITION_TO_STR>&apos;%d°&apos;</FORMAT_POSITION_TO_STR> <BINDING_PREFIX>Deg_</BINDING_PREFIX> <IE_GET_STATE>#GET_FLAPS_HANDLE#</IE_GET_STATE> <IE_SET_STATE>#SET_FLAPS_HANDLE#</IE_SET_STATE> <UseParametersFn Name="ASOBO_Watch_Simvar_Helper"> <SIMVAR>#SIMVAR_FLAPS_HANDLE#</SIMVAR> </UseParametersFn> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Override

    ParametersFn used:

    • ASOBO_Flaps_Lever_Parameters

  Return parameters:

  Parameters set:

  • XSTATES_TYPE
  • FORMAT_POSITION_TO_STR
  • BINDING_PREFIX
  • IE_GET_STATE (using GET_FLAPS_HANDLE)
  • IE_SET_STATE (using SET_FLAPS_HANDLE)

  ParametersFn used:

  • ASOBO_Auto_Define_XStates_Variant_Helper
  • ASOBO_Watch_Simvar_Helper

    Parameters set:

    • SIMVAR (using SIMVAR_FLAPS_HANDLE)

• ASOBO_Flaps_States_Settings_Config#

  Definition from XML
  <ParametersFn Name="ASOBO_Flaps_States_Settings_Config"> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Flaps_Lever_Parameters"/> </Parameters> <ReturnParameters> <UseParametersFn Name="ASOBO_Auto_Define_XStates_Variant_Helper"/> <IE_GET_STATE>#GET_FLAPS_HANDLE#</IE_GET_STATE> <IE_SET_STATE>#SET_FLAPS_HANDLE#</IE_SET_STATE> <IE_INC_CODE>#GET_FLAPS_HANDLE# p0 + #SET_FLAPS_HANDLE#</IE_INC_CODE> <IE_DEC_CODE>#GET_FLAPS_HANDLE# p0 - #SET_FLAPS_HANDLE#</IE_DEC_CODE> <UseParametersFn Name="ASOBO_Watch_Simvar_Helper"> <SIMVAR>#SIMVAR_FLAPS_HANDLE#</SIMVAR> </UseParametersFn> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Override

    ParametersFn used:

    • ASOBO_Flaps_Lever_Parameters

  Return parameters:

  Parameters set:

  • IE_GET_STATE (using GET_FLAPS_HANDLE)
  • IE_SET_STATE (using SET_FLAPS_HANDLE)
  • IE_INC_CODE (using GET_FLAPS_HANDLE, SET_FLAPS_HANDLE)
  • IE_DEC_CODE (using GET_FLAPS_HANDLE, SET_FLAPS_HANDLE)

  ParametersFn used:

  • ASOBO_Auto_Define_XStates_Variant_Helper
  • ASOBO_Watch_Simvar_Helper

    Parameters set:

    • SIMVAR (using SIMVAR_FLAPS_HANDLE)

• ASOBO_Flaps_Switch_Settings_Config#

  Definition from XML
  <ParametersFn Name="ASOBO_Flaps_Switch_Settings_Config"> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Flaps_Lever_Parameters"/> </Parameters> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Get_Enum_Parameters_Helper"> <SaveParameters ID="Enum_Values"> <POS_NEUTRAL>0</POS_NEUTRAL> <POS_INC>1</POS_INC> <POS_DEC>2</POS_DEC> </SaveParameters> </UseParametersFn> </Parameters> <ReturnParameters> <UseParametersFn Name="ASOBO_Auto_Define_XStates_Variant_Helper"/> <POS_NEUTRAL_CHECK>#IS_POS_NEUTRAL#</POS_NEUTRAL_CHECK> <POS_INCR_CHECK>#IS_POS_INC#</POS_INCR_CHECK> <POS_DECR_CHECK>#IS_POS_DEC#</POS_DECR_CHECK> <POS_NEUTRAL_CODE>#SET_POS_NEUTRAL# (&gt;B:PROCEDURE_FLAPS_Neutral)</POS_NEUTRAL_CODE> <POS_INCR_CODE>#SET_POS_INC# (&gt;B:PROCEDURE_FLAPS_Increment)</POS_INCR_CODE> <POS_DECR_CODE>#SET_POS_DEC# (&gt;B:PROCEDURE_FLAPS_Decrement)</POS_DECR_CODE> <IE_TOOLTIP_VALUE>#GET_FLAPS_HANDLE_CONTINUOUS# &apos;%.1f%%&apos; @sprintf</IE_TOOLTIP_VALUE> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Override

    ParametersFn used:

    • ASOBO_Flaps_Lever_Parameters
  • Override

    ParametersFn used:

    • ASOBO_Get_Enum_Parameters_Helper

      Parameters set:

      • POS_NEUTRAL
      • POS_INC
      • POS_DEC

  Return parameters:

  Parameters set:

  • POS_NEUTRAL_CHECK (using IS_POS_NEUTRAL)
  • POS_INCR_CHECK (using IS_POS_INC)
  • POS_DECR_CHECK (using IS_POS_DEC)
  • POS_NEUTRAL_CODE (using SET_POS_NEUTRAL)
  • POS_INCR_CODE (using SET_POS_INC)
  • POS_DECR_CODE (using SET_POS_DEC)
  • IE_TOOLTIP_VALUE (using GET_FLAPS_HANDLE_CONTINUOUS)

  ParametersFn used:

  • ASOBO_Auto_Define_XStates_Variant_Helper

• ASOBO_Spoilers_Settings_Config#

  Definition from XML
  <ParametersFn Name="ASOBO_Spoilers_Settings_Config"> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Spoilers_Lever_Parameters"/> </Parameters> <ReturnParameters> <VALUE_TYPE>U16K</VALUE_TYPE> <IE_GET_STATE>#GET_SPOILERS_HANDLE_16K#</IE_GET_STATE> <IE_SET_STATE>#SET_SPOILERS_HANDLE_16K#</IE_SET_STATE> <UseParametersFn Name="ASOBO_Watch_Simvar_Helper"> <SIMVAR>#SIMVAR_SPOILERS_HANDLE#</SIMVAR> </UseParametersFn> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Override

    ParametersFn used:

    • ASOBO_Spoilers_Lever_Parameters

  Return parameters:

  Parameters set:

  • VALUE_TYPE
  • IE_GET_STATE (using GET_SPOILERS_HANDLE_16K)
  • IE_SET_STATE (using SET_SPOILERS_HANDLE_16K)

  ParametersFn used:

  • ASOBO_Watch_Simvar_Helper

    Parameters set:

    • SIMVAR (using SIMVAR_SPOILERS_HANDLE)

• ASOBO_Trim_Settings_Config_Base#

  Definition from XML
  <ParametersFn Name="ASOBO_Trim_Settings_Config_Base"> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Get_Process_Trim_Limits_Parameters_Helper"/> </Parameters> <Parameters Type="Default"> <DEGREE_INCREMENT_PER_THRESHOLD>0.01</DEGREE_INCREMENT_PER_THRESHOLD> <DEGREE_INCREMENT_PER_INC_DEC_EVENT>0.5</DEGREE_INCREMENT_PER_INC_DEC_EVENT> </Parameters> <ReturnParameters> <VALUE_TYPE>S16K</VALUE_TYPE> <IE_GET_STATE>#GET_TRIM_16K#</IE_GET_STATE> <IE_SET_STATE>#SET_TRIM_16K#</IE_SET_STATE> <IE_INCREMENT>#DEGREE_INCREMENT_PER_INC_DEC_EVENT# #TRIM_RANGE# 2 / / @16K *</IE_INCREMENT> <UseParametersFn Name="ASOBO_Watch_Simvar_Helper"> <SIMVAR>#TRIM_AXIS_VAR#</SIMVAR> </UseParametersFn> <INCREMENT_PER_THRESHOLD>#DEGREE_INCREMENT_PER_THRESHOLD# #TRIM_RANGE# /</INCREMENT_PER_THRESHOLD> <IE_TOOLTIP_VALUE>#GET_TRIM_DEGREES# &apos;%.1f°&apos; @sprintf</IE_TOOLTIP_VALUE> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Override

    ParametersFn used:

    • ASOBO_Get_Process_Trim_Limits_Parameters_Helper
  • Default

    Parameters set:

    • DEGREE_INCREMENT_PER_THRESHOLD
    • DEGREE_INCREMENT_PER_INC_DEC_EVENT

  Return parameters:

  Parameters set:

  • VALUE_TYPE
  • IE_GET_STATE (using GET_TRIM_16K)
  • IE_SET_STATE (using SET_TRIM_16K)
  • IE_INCREMENT (using DEGREE_INCREMENT_PER_INC_DEC_EVENT, TRIM_RANGE)
  • INCREMENT_PER_THRESHOLD (using DEGREE_INCREMENT_PER_THRESHOLD, TRIM_RANGE)
  • IE_TOOLTIP_VALUE (using GET_TRIM_DEGREES)

  ParametersFn used:

  • ASOBO_Watch_Simvar_Helper

    Parameters set:

    • SIMVAR (using TRIM_AXIS_VAR)

• ASOBO_Elevator_Trim_Settings_Config#

  Definition from XML
  <ParametersFn Name="ASOBO_Elevator_Trim_Settings_Config"> <ReturnParameters> <UseParametersFn Name="ASOBO_Trim_Settings_Config_Base"> <TRIM_TYPE>ELEVATOR</TRIM_TYPE> </UseParametersFn> </ReturnParameters> </ParametersFn>

  Return parameters:

  ParametersFn used:

  • ASOBO_Trim_Settings_Config_Base

    Parameters set:

    • TRIM_TYPE

• ASOBO_Aileron_Trim_Settings_Config#

  Definition from XML
  <ParametersFn Name="ASOBO_Aileron_Trim_Settings_Config"> <ReturnParameters> <UseParametersFn Name="ASOBO_Trim_Settings_Config_Base"> <TRIM_TYPE>AILERON</TRIM_TYPE> </UseParametersFn> </ReturnParameters> </ParametersFn>

  Return parameters:

  ParametersFn used:

  • ASOBO_Trim_Settings_Config_Base

    Parameters set:

    • TRIM_TYPE

• ASOBO_Rudder_Trim_Settings_Config#

  Definition from XML
  <ParametersFn Name="ASOBO_Rudder_Trim_Settings_Config"> <ReturnParameters> <UseParametersFn Name="ASOBO_Trim_Settings_Config_Base"> <TRIM_TYPE>RUDDER</TRIM_TYPE> </UseParametersFn> </ReturnParameters> </ParametersFn>

  Return parameters:

  ParametersFn used:

  • ASOBO_Trim_Settings_Config_Base

    Parameters set:

    • TRIM_TYPE

• ASOBO_Trim_Axis_Settings_Config_Base#

  Definition from XML
  <ParametersFn Name="ASOBO_Trim_Axis_Settings_Config_Base"> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Get_Process_Trim_Limits_Parameters_Helper"/> </Parameters> <Parameters Type="Default"> <DEGREE_INCREMENT_PER_THRESHOLD>0.01</DEGREE_INCREMENT_PER_THRESHOLD> <DEGREE_INCREMENT_PER_INC_DEC_EVENT>0.5</DEGREE_INCREMENT_PER_INC_DEC_EVENT> </Parameters> <ReturnParameters> <VALUE_TYPE>M16K</VALUE_TYPE> <IE_GET_STATE>#GET_TRIM_16K#</IE_GET_STATE> <IE_SET_STATE>#SET_TRIM_16K#</IE_SET_STATE> <IE_INCREMENT>#DEGREE_INCREMENT_PER_INC_DEC_EVENT# #TRIM_RANGE# 2 / / 100 *</IE_INCREMENT> <UseParametersFn Name="ASOBO_Watch_Simvar_Helper"> <SIMVAR>#TRIM_AXIS_VAR#</SIMVAR> </UseParametersFn> <INCREMENT_PER_THRESHOLD>#DEGREE_INCREMENT_PER_THRESHOLD# #TRIM_RANGE# /</INCREMENT_PER_THRESHOLD> <IE_TOOLTIP_VALUE>#GET_TRIM_DEGREES# &apos;%.1f°&apos; @sprintf</IE_TOOLTIP_VALUE> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Override

    ParametersFn used:

    • ASOBO_Get_Process_Trim_Limits_Parameters_Helper
  • Default

    Parameters set:

    • DEGREE_INCREMENT_PER_THRESHOLD
    • DEGREE_INCREMENT_PER_INC_DEC_EVENT

  Return parameters:

  Parameters set:

  • VALUE_TYPE
  • IE_GET_STATE (using GET_TRIM_16K)
  • IE_SET_STATE (using SET_TRIM_16K)
  • IE_INCREMENT (using DEGREE_INCREMENT_PER_INC_DEC_EVENT, TRIM_RANGE)
  • INCREMENT_PER_THRESHOLD (using DEGREE_INCREMENT_PER_THRESHOLD, TRIM_RANGE)
  • IE_TOOLTIP_VALUE (using GET_TRIM_DEGREES)

  ParametersFn used:

  • ASOBO_Watch_Simvar_Helper

    Parameters set:

    • SIMVAR (using TRIM_AXIS_VAR)

• ASOBO_Elevator_Trim_Axis_Settings_Config#

  Definition from XML
  <ParametersFn Name="ASOBO_Elevator_Trim_Axis_Settings_Config"> <ReturnParameters> <UseParametersFn Name="ASOBO_Trim_Axis_Settings_Config_Base"> <TRIM_TYPE>ELEVATOR</TRIM_TYPE> </UseParametersFn> </ReturnParameters> </ParametersFn>

  Return parameters:

  ParametersFn used:

  • ASOBO_Trim_Axis_Settings_Config_Base

    Parameters set:

    • TRIM_TYPE

• ASOBO_Aileron_Trim_Axis_Settings_Config#

  Definition from XML
  <ParametersFn Name="ASOBO_Aileron_Trim_Axis_Settings_Config"> <ReturnParameters> <UseParametersFn Name="ASOBO_Trim_Axis_Settings_Config_Base"> <TRIM_TYPE>AILERON</TRIM_TYPE> </UseParametersFn> </ReturnParameters> </ParametersFn>

  Return parameters:

  ParametersFn used:

  • ASOBO_Trim_Axis_Settings_Config_Base

    Parameters set:

    • TRIM_TYPE

• ASOBO_Rudder_Trim_Axis_Settings_Config#

  Definition from XML
  <ParametersFn Name="ASOBO_Rudder_Trim_Axis_Settings_Config"> <ReturnParameters> <UseParametersFn Name="ASOBO_Trim_Axis_Settings_Config_Base"> <TRIM_TYPE>RUDDER</TRIM_TYPE> </UseParametersFn> </ReturnParameters> </ParametersFn>

  Return parameters:

  ParametersFn used:

  • ASOBO_Trim_Axis_Settings_Config_Base

    Parameters set:

    • TRIM_TYPE

• ASOBO_ELEVATOR_Incremental_TRIM_Settings_Config#

  Definition from XML
  <ParametersFn Name="ASOBO_ELEVATOR_Incremental_TRIM_Settings_Config"> <ReturnParameters> <UseParametersFn Name="ASOBO_Incremental_TRIM_Settings_Positions"> <TRIM_TYPE>ELEVATOR</TRIM_TYPE> </UseParametersFn> </ReturnParameters> </ParametersFn>

  Return parameters:

  ParametersFn used:

  • ASOBO_Incremental_TRIM_Settings_Positions

    Parameters set:

    • TRIM_TYPE

• ASOBO_AILERON_Incremental_TRIM_Settings_Config#

  Definition from XML
  <ParametersFn Name="ASOBO_AILERON_Incremental_TRIM_Settings_Config"> <ReturnParameters> <UseParametersFn Name="ASOBO_Incremental_TRIM_Settings_Positions"> <TRIM_TYPE>AILERON</TRIM_TYPE> </UseParametersFn> </ReturnParameters> </ParametersFn>

  Return parameters:

  ParametersFn used:

  • ASOBO_Incremental_TRIM_Settings_Positions

    Parameters set:

    • TRIM_TYPE

• ASOBO_RUDDER_Incremental_TRIM_Settings_Config#

  Definition from XML
  <ParametersFn Name="ASOBO_RUDDER_Incremental_TRIM_Settings_Config"> <ReturnParameters> <UseParametersFn Name="ASOBO_Incremental_TRIM_Settings_Positions"> <TRIM_TYPE>RUDDER</TRIM_TYPE> </UseParametersFn> </ReturnParameters> </ParametersFn>

  Return parameters:

  ParametersFn used:

  • ASOBO_Incremental_TRIM_Settings_Positions

    Parameters set:

    • TRIM_TYPE

• ASOBO_LONGITUDINAL_Incremental_TRIM_Settings_Config#

  Definition from XML
  <ParametersFn Name="ASOBO_LONGITUDINAL_Incremental_TRIM_Settings_Config"> <ReturnParameters> <UseParametersFn Name="ASOBO_Incremental_TRIM_Settings_Positions"> <TRIM_TYPE>LONGITUDINAL</TRIM_TYPE> </UseParametersFn> </ReturnParameters> </ParametersFn>

  Return parameters:

  ParametersFn used:

  • ASOBO_Incremental_TRIM_Settings_Positions

    Parameters set:

    • TRIM_TYPE

• ASOBO_LATERAL_Incremental_TRIM_Settings_Config#

  Definition from XML
  <ParametersFn Name="ASOBO_LATERAL_Incremental_TRIM_Settings_Config"> <ReturnParameters> <UseParametersFn Name="ASOBO_Incremental_TRIM_Settings_Positions"> <TRIM_TYPE>LATERAL</TRIM_TYPE> </UseParametersFn> </ReturnParameters> </ParametersFn>

  Return parameters:

  ParametersFn used:

  • ASOBO_Incremental_TRIM_Settings_Positions

    Parameters set:

    • TRIM_TYPE

• ASOBO_Incremental_TRIM_Settings_Positions#

  Definition from XML
  <ParametersFn Name="ASOBO_Incremental_TRIM_Settings_Positions"> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Get_Process_Trim_Limits_Parameters_Helper"/> <UseParametersFn Name="ASOBO_Get_Enum_Parameters_Helper"> <SaveParameters ID="Enum_Values"> <POS_NEUTRAL>0</POS_NEUTRAL> <POS_INC>1</POS_INC> <POS_DEC>2</POS_DEC> </SaveParameters> </UseParametersFn> </Parameters> <ReturnParameters> <UseParametersFn Name="ASOBO_Auto_Define_XStates_Variant_Helper"/> <POS_NEUTRAL_CHECK>#IS_POS_NEUTRAL#</POS_NEUTRAL_CHECK> <POS_INCR_CHECK>#IS_POS_INC#</POS_INCR_CHECK> <POS_DECR_CHECK>#IS_POS_DEC#</POS_DECR_CHECK> <POS_NEUTRAL_CODE>#SET_POS_NEUTRAL# (&gt;B:PROCEDURE_#TRIM_TYPE#_Trim_Neutral)</POS_NEUTRAL_CODE> <POS_INCR_CODE>#SET_POS_INC# (&gt;B:PROCEDURE_#TRIM_TYPE#_Trim_Increment)</POS_INCR_CODE> <POS_DECR_CODE>#SET_POS_DEC# (&gt;B:PROCEDURE_#TRIM_TYPE#_Trim_Decrement)</POS_DECR_CODE> <Condition Valid="TRIM_HAS_NO_ANGLE_INFORMATION"> <True> <IE_TOOLTIP_VALUE>#GET_TRIM_PERCENT# &apos;%.1f%%&apos; @sprintf</IE_TOOLTIP_VALUE> </True> <False> <IE_TOOLTIP_VALUE>#GET_TRIM_DEGREES# &apos;%.1f°&apos; @sprintf</IE_TOOLTIP_VALUE> </False> </Condition> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Override

    ParametersFn used:

    • ASOBO_Get_Process_Trim_Limits_Parameters_Helper
    • ASOBO_Get_Enum_Parameters_Helper

      Parameters set:

      • POS_NEUTRAL
      • POS_INC
      • POS_DEC

  Return parameters:

  Parameters set:

  • POS_NEUTRAL_CHECK (using IS_POS_NEUTRAL)
  • POS_INCR_CHECK (using IS_POS_INC)
  • POS_DECR_CHECK (using IS_POS_DEC)
  • POS_NEUTRAL_CODE (using SET_POS_NEUTRAL, TRIM_TYPE)
  • POS_INCR_CODE (using SET_POS_INC, TRIM_TYPE)
  • POS_DECR_CODE (using SET_POS_DEC, TRIM_TYPE)

  ParametersFn used:

  • ASOBO_Auto_Define_XStates_Variant_Helper

  Condition: Valid(TRIM_HAS_NO_ANGLE_INFORMATION)

  • Case: True

    Parameters set:

    • IE_TOOLTIP_VALUE (using GET_TRIM_PERCENT)
  • Case: False

    Parameters set:

    • IE_TOOLTIP_VALUE (using GET_TRIM_DEGREES)

• ASOBO_LONGITUDINAL_LATERAL_Incremental_TRIM_Settings_Config#

  Definition from XML
  <ParametersFn Name="ASOBO_LONGITUDINAL_LATERAL_Incremental_TRIM_Settings_Config"> <ReturnParameters> <UseParametersFn Name="ASOBO_Increment_TRIM_Axis_Settings_Positions"> <TRIM_Y_AXIS_TYPE>LONGITUDINAL</TRIM_Y_AXIS_TYPE> <TRIM_X_AXIS_TYPE>LATERAL</TRIM_X_AXIS_TYPE> </UseParametersFn> </ReturnParameters> </ParametersFn>

  Return parameters:

  ParametersFn used:

  • ASOBO_Increment_TRIM_Axis_Settings_Positions

    Parameters set:

    • TRIM_Y_AXIS_TYPE
    • TRIM_X_AXIS_TYPE

• ASOBO_Increment_TRIM_Axis_Settings_Positions#

  Definition from XML
  <ParametersFn Name="ASOBO_Increment_TRIM_Axis_Settings_Positions"> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Get_Process_Trim_Limits_Parameters_Helper"> <OUT_PARAM_ID>X_AXIS</OUT_PARAM_ID> <TRIM_TYPE>#TRIM_X_AXIS_TYPE#</TRIM_TYPE> </UseParametersFn> <UseParametersFn Name="ASOBO_Get_Process_Trim_Limits_Parameters_Helper"> <OUT_PARAM_ID>Y_AXIS</OUT_PARAM_ID> <TRIM_TYPE>#TRIM_Y_AXIS_TYPE#</TRIM_TYPE> </UseParametersFn> <UseParametersFn Name="ASOBO_Get_Enum_Parameters_Helper"> <SaveParameters ID="Enum_Values"> <POS_NEUTRAL>0</POS_NEUTRAL> <POS_DN>1</POS_DN> <POS_UP>2</POS_UP> <POS_L>3</POS_L> <POS_R>4</POS_R> </SaveParameters> </UseParametersFn> </Parameters> <Parameters Type="Default"> <UseParametersFn Name="ASOBO_IE_Directional_Variables_Parameters"/> <Condition Valid="TRIM_X_AXIS_HAS_NO_ANGLE_INFORMATION"> <True> <FORMAT_IE_TOOLTIP_X_AXIS>#GET_TRIM_X_AXIS_PERCENT# &apos;%.1f%%&apos; @sprintf</FORMAT_IE_TOOLTIP_X_AXIS> </True> <False> <FORMAT_IE_TOOLTIP_X_AXIS>#GET_TRIM_X_AXIS_DEGREES# &apos;%.1f°&apos; @sprintf</FORMAT_IE_TOOLTIP_X_AXIS> </False> </Condition> <Condition Valid="TRIM_Y_AXIS_HAS_NO_ANGLE_INFORMATION"> <True> <FORMAT_IE_TOOLTIP_Y_AXIS>#GET_TRIM_Y_AXIS_PERCENT# &apos;%.1f%%&apos; @sprintf</FORMAT_IE_TOOLTIP_Y_AXIS> </True> <False> <FORMAT_IE_TOOLTIP_Y_AXIS>#GET_TRIM_Y_AXIS_DEGREES# &apos;%.1f°&apos; @sprintf</FORMAT_IE_TOOLTIP_Y_AXIS> </False> </Condition> </Parameters> <ReturnParameters> <UseParametersFn Name="ASOBO_Add_Set_Binding_Helper"> <ALIAS_ID>#TRIM_X_AXIS_TYPE#_Set</ALIAS_ID> <PARAM_0>p0</PARAM_0> <PARAM_1>#GET_Y_AXIS_POSITION#</PARAM_1> <PARAM_1_IS_DYNAMIC>True</PARAM_1_IS_DYNAMIC> <PARAM_0_IS_DYNAMIC>True</PARAM_0_IS_DYNAMIC> </UseParametersFn> <UseParametersFn Name="ASOBO_Add_Set_Binding_Helper"> <ALIAS_ID>#TRIM_Y_AXIS_TYPE#_Set</ALIAS_ID> <PARAM_0>#GET_X_AXIS_POSITION#</PARAM_0> <PARAM_1>p0</PARAM_1> <PARAM_0_IS_DYNAMIC>True</PARAM_0_IS_DYNAMIC> <PARAM_1_IS_DYNAMIC>True</PARAM_1_IS_DYNAMIC> </UseParametersFn> <UseParametersFn Name="ASOBO_Auto_Define_XStates_Variant_Helper"/> <POS_NEUTRAL_CHECK>#IS_POS_NEUTRAL#</POS_NEUTRAL_CHECK> <POS_UP_CHECK>#IS_POS_UP#</POS_UP_CHECK> <POS_DN_CHECK>#IS_POS_DN#</POS_DN_CHECK> <POS_L_CHECK>#IS_POS_L#</POS_L_CHECK> <POS_R_CHECK>#IS_POS_R#</POS_R_CHECK> <POS_NEUTRAL_CODE>#SET_POS_NEUTRAL# (&gt;B:PROCEDURE_#TRIM_X_AXIS_TYPE#_Trim_Neutral) (&gt;B:PROCEDURE_#TRIM_Y_AXIS_TYPE#_Trim_Neutral)</POS_NEUTRAL_CODE> <POS_UP_CODE>#SET_POS_UP# (&gt;B:PROCEDURE_#TRIM_Y_AXIS_TYPE#_Trim_Decrement) (&gt;B:PROCEDURE_#TRIM_X_AXIS_TYPE#_Trim_Neutral)</POS_UP_CODE> <POS_DN_CODE>#SET_POS_DN# (&gt;B:PROCEDURE_#TRIM_Y_AXIS_TYPE#_Trim_Increment) (&gt;B:PROCEDURE_#TRIM_X_AXIS_TYPE#_Trim_Neutral)</POS_DN_CODE> <POS_L_CODE>#SET_POS_L# (&gt;B:PROCEDURE_#TRIM_X_AXIS_TYPE#_Trim_Decrement) (&gt;B:PROCEDURE_#TRIM_Y_AXIS_TYPE#_Trim_Neutral)</POS_L_CODE> <POS_R_CODE>#SET_POS_R# (&gt;B:PROCEDURE_#TRIM_X_AXIS_TYPE#_Trim_Increment) (&gt;B:PROCEDURE_#TRIM_Y_AXIS_TYPE#_Trim_Neutral)</POS_R_CODE> <IE_TOOLTIP_VALUE>#FORMAT_IE_TOOLTIP_X_AXIS# #FORMAT_IE_TOOLTIP_Y_AXIS# &apos;%s / %s&apos; @Sprintf</IE_TOOLTIP_VALUE> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Override

    ParametersFn used:

    • ASOBO_Get_Process_Trim_Limits_Parameters_Helper

      Parameters set:

      • OUT_PARAM_ID
      • TRIM_TYPE (using TRIM_X_AXIS_TYPE)
    • ASOBO_Get_Process_Trim_Limits_Parameters_Helper

      Parameters set:

      • OUT_PARAM_ID
      • TRIM_TYPE (using TRIM_Y_AXIS_TYPE)
    • ASOBO_Get_Enum_Parameters_Helper

      Parameters set:

      • POS_NEUTRAL
      • POS_DN
      • POS_UP
      • POS_L
      • POS_R
  • Default

    ParametersFn used:

    • ASOBO_IE_Directional_Variables_Parameters

    Condition: Valid(TRIM_X_AXIS_HAS_NO_ANGLE_INFORMATION)

    • Case: True

      Parameters set:

      • FORMAT_IE_TOOLTIP_X_AXIS (using GET_TRIM_X_AXIS_PERCENT)
    • Case: False

      Parameters set:

      • FORMAT_IE_TOOLTIP_X_AXIS (using GET_TRIM_X_AXIS_DEGREES)

    Condition: Valid(TRIM_Y_AXIS_HAS_NO_ANGLE_INFORMATION)

    • Case: True

      Parameters set:

      • FORMAT_IE_TOOLTIP_Y_AXIS (using GET_TRIM_Y_AXIS_PERCENT)
    • Case: False

      Parameters set:

      • FORMAT_IE_TOOLTIP_Y_AXIS (using GET_TRIM_Y_AXIS_DEGREES)

  Return parameters:

  Parameters set:

  • POS_NEUTRAL_CHECK (using IS_POS_NEUTRAL)
  • POS_UP_CHECK (using IS_POS_UP)
  • POS_DN_CHECK (using IS_POS_DN)
  • POS_L_CHECK (using IS_POS_L)
  • POS_R_CHECK (using IS_POS_R)
  • POS_NEUTRAL_CODE (using SET_POS_NEUTRAL, TRIM_X_AXIS_TYPE, TRIM_Y_AXIS_TYPE)
  • POS_UP_CODE (using SET_POS_UP, TRIM_Y_AXIS_TYPE, TRIM_X_AXIS_TYPE)
  • POS_DN_CODE (using SET_POS_DN, TRIM_Y_AXIS_TYPE, TRIM_X_AXIS_TYPE)
  • POS_L_CODE (using SET_POS_L, TRIM_X_AXIS_TYPE, TRIM_Y_AXIS_TYPE)
  • POS_R_CODE (using SET_POS_R, TRIM_X_AXIS_TYPE, TRIM_Y_AXIS_TYPE)
  • IE_TOOLTIP_VALUE (using FORMAT_IE_TOOLTIP_X_AXIS, FORMAT_IE_TOOLTIP_Y_AXIS)

  ParametersFn used:

  • ASOBO_Add_Set_Binding_Helper

    Parameters set:

    • ALIAS_ID (using TRIM_X_AXIS_TYPE)
    • PARAM_0
    • PARAM_1 (using GET_Y_AXIS_POSITION)
    • PARAM_1_IS_DYNAMIC
    • PARAM_0_IS_DYNAMIC
  • ASOBO_Add_Set_Binding_Helper

    Parameters set:

    • ALIAS_ID (using TRIM_Y_AXIS_TYPE)
    • PARAM_0 (using GET_X_AXIS_POSITION)
    • PARAM_1
    • PARAM_0_IS_DYNAMIC
    • PARAM_1_IS_DYNAMIC
  • ASOBO_Auto_Define_XStates_Variant_Helper

• Get_Procedure_Trim_Parameters#

  Definition from XML
  <ParametersFn Name="Get_Procedure_Trim_Parameters"> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Get_Process_Trim_Limits_Parameters_Helper"/> </Parameters> <Condition Valid="TRIM_HAS_NO_ANGLE_INFORMATION"> <True> <Parameters Type="Default"> <INCREMENT_PER_SECOND_PCT>10</INCREMENT_PER_SECOND_PCT> </Parameters> <Parameters Type="Override"> <INCREMENT_PER_SECOND_16K Process="Float">#INCREMENT_PER_SECOND_PCT# #TRIM_RANGE# / #TRIM_RANGE_16K# *</INCREMENT_PER_SECOND_16K> </Parameters> </True> <False> <Parameters Type="Default"> <INCREMENT_PER_SECOND_DEGREES>1</INCREMENT_PER_SECOND_DEGREES> </Parameters> <Parameters Type="Override"> <INCREMENT_PER_SECOND_16K Process="Float">#INCREMENT_PER_SECOND_DEGREES# #TRIM_RANGE# / #TRIM_RANGE_16K# *</INCREMENT_PER_SECOND_16K> </Parameters> </False> </Condition> <ReturnParameters> <UseParametersFn Name="Get_Procedure_Incremental_Switch_Parameters"> <SURFACE_TYPE>#TRIM_TYPE#</SURFACE_TYPE> <GET_SURFACE_VALUE_16K>#GET_TRIM_16K#</GET_SURFACE_VALUE_16K> <SET_SURFACE_VALUE_16K>#SET_TRIM_16K#</SET_SURFACE_VALUE_16K> </UseParametersFn> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Override

    ParametersFn used:

    • ASOBO_Get_Process_Trim_Limits_Parameters_Helper

  Return parameters:

  ParametersFn used:

  • Get_Procedure_Incremental_Switch_Parameters

    Parameters set:

    • SURFACE_TYPE (using TRIM_TYPE)
    • GET_SURFACE_VALUE_16K (using GET_TRIM_16K)
    • SET_SURFACE_VALUE_16K (using SET_TRIM_16K)

• Get_Procedure_Incremental_Switch_Parameters#

  Definition from XML
  <ParametersFn Name="Get_Procedure_Incremental_Switch_Parameters"> <Parameters Type="Default"> <Set_Incremental_Switch_State>@Set_Incremental_Switch_State</Set_Incremental_Switch_State> <Get_Incremental_Switch_State>@Get_Incremental_Switch_State</Get_Incremental_Switch_State> </Parameters> <Parameters Type="Default"> <INCREMENT_PER_SECOND_PCT>10</INCREMENT_PER_SECOND_PCT> </Parameters> <Parameters Type="Default"> <INCREMENT_PER_SECOND_16K Process="Float">#INCREMENT_PER_SECOND_PCT# 100 / @16K *</INCREMENT_PER_SECOND_16K> </Parameters> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Move_Interpolation_Helper"> <START_VALUE>#GET_SURFACE_VALUE_16K#</START_VALUE> <SET_NEW_VALUE>#SET_SURFACE_VALUE_16K#</SET_NEW_VALUE> <END_VALUE>(O:_Target_Position, position 16k)</END_VALUE> <COEFFICIENT>#INCREMENT_PER_SECOND_16K# @TICK_Get_Delta_Time *</COEFFICIENT> <OUT_PARAM_NAME>UPDATE_SURFACE_VALUE</OUT_PARAM_NAME> </UseParametersFn> </Parameters> <Parameters Type="Override"> <UPDATE_SURFACE_CODE> #Get_Incremental_Switch_State# @Incremental_Switch_Pos_Incr == if{ @16K sp0 g0 } #Get_Incremental_Switch_State# @Incremental_Switch_Pos_Decr == if{ -@16K sp0 g0 } els{ g1 } :0 l0 (&gt;O:_Target_Position, position 16k) #UPDATE_SURFACE_VALUE# :1 </UPDATE_SURFACE_CODE> </Parameters> <ReturnParameters> <TICK_EVERY_FRAME>True</TICK_EVERY_FRAME> <ON_VALUE_CHANGED>#UPDATE_SURFACE_CODE#</ON_VALUE_CHANGED> <UseParametersFn Name="ASOBO_Append_Set_Code_Helper"> <SET_CODE>p0 #Set_Incremental_Switch_State#</SET_CODE> </UseParametersFn> <UseParametersFn Name="ASOBO_Append_Value_Code_Helper"> <VALUE_CODE>#Get_Incremental_Switch_State#</VALUE_CODE> </UseParametersFn> <SaveParameters ID="#IE_PARAMS#" Append="Override"> <IE_SET_ARG_COUNT>1</IE_SET_ARG_COUNT> <SET_PARAM_0>p0</SET_PARAM_0> <SET_PARAM_0_TYPE>Float</SET_PARAM_0_TYPE> <SET_PARAM_0_IS_DYNAMIC>True</SET_PARAM_0_IS_DYNAMIC> </SaveParameters> <UseParametersFn Name="ASOBO_Add_Set_Binding_Helper"> <ALIAS_ID>Neutral</ALIAS_ID> <PARAM_0>@Incremental_Switch_Pos_Neutral</PARAM_0> <PARAM_0_IS_DYNAMIC>False</PARAM_0_IS_DYNAMIC> </UseParametersFn> <UseParametersFn Name="ASOBO_Add_Set_Binding_Helper"> <ALIAS_ID>Increment</ALIAS_ID> <PARAM_0>@Incremental_Switch_Pos_Incr</PARAM_0> <PARAM_0_IS_DYNAMIC>False</PARAM_0_IS_DYNAMIC> </UseParametersFn> <UseParametersFn Name="ASOBO_Add_Set_Binding_Helper"> <ALIAS_ID>Decrement</ALIAS_ID> <PARAM_0>@Incremental_Switch_Pos_Decr</PARAM_0> <PARAM_0_IS_DYNAMIC>False</PARAM_0_IS_DYNAMIC> </UseParametersFn> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Default

    Parameters set:

    • Set_Incremental_Switch_State
    • Get_Incremental_Switch_State
  • Default

    Parameters set:

    • INCREMENT_PER_SECOND_PCT
  • Default

    Parameters set:

    • INCREMENT_PER_SECOND_16K (using INCREMENT_PER_SECOND_PCT)
  • Override

    ParametersFn used:

    • ASOBO_Move_Interpolation_Helper

      Parameters set:

      • START_VALUE (using GET_SURFACE_VALUE_16K)
      • SET_NEW_VALUE (using SET_SURFACE_VALUE_16K)
      • END_VALUE
      • COEFFICIENT (using INCREMENT_PER_SECOND_16K)
      • OUT_PARAM_NAME
  • Override

    Parameters set:

    • UPDATE_SURFACE_CODE (using Get_Incremental_Switch_State, UPDATE_SURFACE_VALUE)

  Return parameters:

  Parameters read:

  • IE_PARAMS

  Parameters set:

  • TICK_EVERY_FRAME
  • ON_VALUE_CHANGED (using UPDATE_SURFACE_CODE)
  • IE_SET_ARG_COUNT
  • SET_PARAM_0
  • SET_PARAM_0_TYPE
  • SET_PARAM_0_IS_DYNAMIC

  ParametersFn used:

  • ASOBO_Append_Set_Code_Helper

    Parameters set:

    • SET_CODE (using Set_Incremental_Switch_State)
  • ASOBO_Append_Value_Code_Helper

    Parameters set:

    • VALUE_CODE (using Get_Incremental_Switch_State)
  • ASOBO_Add_Set_Binding_Helper

    Parameters set:

    • ALIAS_ID
    • PARAM_0
    • PARAM_0_IS_DYNAMIC
  • ASOBO_Add_Set_Binding_Helper

    Parameters set:

    • ALIAS_ID
    • PARAM_0
    • PARAM_0_IS_DYNAMIC
  • ASOBO_Add_Set_Binding_Helper

    Parameters set:

    • ALIAS_ID
    • PARAM_0
    • PARAM_0_IS_DYNAMIC

• Get_Procedure_Rudder_Trim_Parameters#

  Definition from XML
  <ParametersFn Name="Get_Procedure_Rudder_Trim_Parameters"> <ReturnParameters> <UseParametersFn Name="Get_Procedure_Trim_Parameters"> <TRIM_TYPE>RUDDER</TRIM_TYPE> </UseParametersFn> </ReturnParameters> </ParametersFn>

  Return parameters:

  ParametersFn used:

  • Get_Procedure_Trim_Parameters

    Parameters set:

    • TRIM_TYPE

• Get_Procedure_Aileron_Trim_Parameters#

  Definition from XML
  <ParametersFn Name="Get_Procedure_Aileron_Trim_Parameters"> <ReturnParameters> <UseParametersFn Name="Get_Procedure_Trim_Parameters"> <TRIM_TYPE>AILERON</TRIM_TYPE> </UseParametersFn> </ReturnParameters> </ParametersFn>

  Return parameters:

  ParametersFn used:

  • Get_Procedure_Trim_Parameters

    Parameters set:

    • TRIM_TYPE

• Get_Procedure_Elevator_Trim_Parameters#

  Definition from XML
  <ParametersFn Name="Get_Procedure_Elevator_Trim_Parameters"> <ReturnParameters> <UseParametersFn Name="Get_Procedure_Trim_Parameters"> <TRIM_TYPE>ELEVATOR</TRIM_TYPE> </UseParametersFn> </ReturnParameters> </ParametersFn>

  Return parameters:

  ParametersFn used:

  • Get_Procedure_Trim_Parameters

    Parameters set:

    • TRIM_TYPE

• Get_Procedure_Longitudinal_Trim_Parameters#

  Definition from XML
  <ParametersFn Name="Get_Procedure_Longitudinal_Trim_Parameters"> <ReturnParameters> <UseParametersFn Name="Get_Procedure_Trim_Parameters"> <TRIM_TYPE>LONGITUDINAL</TRIM_TYPE> </UseParametersFn> </ReturnParameters> </ParametersFn>

  Return parameters:

  ParametersFn used:

  • Get_Procedure_Trim_Parameters

    Parameters set:

    • TRIM_TYPE

• Get_Procedure_Lateral_Trim_Parameters#

  Definition from XML
  <ParametersFn Name="Get_Procedure_Lateral_Trim_Parameters"> <ReturnParameters> <UseParametersFn Name="Get_Procedure_Trim_Parameters"> <TRIM_TYPE>LATERAL</TRIM_TYPE> </UseParametersFn> </ReturnParameters> </ParametersFn>

  Return parameters:

  ParametersFn used:

  • Get_Procedure_Trim_Parameters

    Parameters set:

    • TRIM_TYPE

• Get_Procedure_Flaps_Parameters#

  Definition from XML
  <ParametersFn Name="Get_Procedure_Flaps_Parameters"> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Flaps_Lever_Parameters"> <SIMVAR_FLAPS_HANDLE_CONTINUOUS_UNIT>Position 16K</SIMVAR_FLAPS_HANDLE_CONTINUOUS_UNIT> </UseParametersFn> </Parameters> <ReturnParameters> <UseParametersFn Name="Get_Procedure_Incremental_Switch_Parameters"> <INCREMENT_PER_SECOND_PCT>#GET_FLAPS_EXTENSION_PERCENT_PER_SECOND#</INCREMENT_PER_SECOND_PCT> <GET_SURFACE_VALUE_16K>#GET_FLAPS_HANDLE_CONTINUOUS#</GET_SURFACE_VALUE_16K> <SET_SURFACE_VALUE_16K>#SET_FLAPS_HANDLE_CONTINUOUS#</SET_SURFACE_VALUE_16K> <SURFACE_TYPE>FLAPS</SURFACE_TYPE> </UseParametersFn> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Override

    ParametersFn used:

    • ASOBO_Flaps_Lever_Parameters

      Parameters set:

      • SIMVAR_FLAPS_HANDLE_CONTINUOUS_UNIT

  Return parameters:

  ParametersFn used:

  • Get_Procedure_Incremental_Switch_Parameters

    Parameters set:

    • INCREMENT_PER_SECOND_PCT (using GET_FLAPS_EXTENSION_PERCENT_PER_SECOND)
    • GET_SURFACE_VALUE_16K (using GET_FLAPS_HANDLE_CONTINUOUS)
    • SET_SURFACE_VALUE_16K (using SET_FLAPS_HANDLE_CONTINUOUS)
    • SURFACE_TYPE

• ASOBO_Tow_Release_Settings_Config#

  Definition from XML
  <ParametersFn Name="ASOBO_Tow_Release_Settings_Config"> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Tow_Release_Parameters"/> </Parameters> <ReturnParameters> <UseParametersFn Name="ASOBO_Auto_Define_XStates_Variant_Helper"/> <UseParametersFn Name="ASOBO_Watch_Simvar_Helper"> <SIMVAR>#SIMVAR_TOW_RELEASE#</SIMVAR> </UseParametersFn> <POS_PULLED_CHECK>(L:1:XMLVAR_Tow_Release_Lever_Position) !</POS_PULLED_CHECK> <POS_RELEASED_CHECK>(L:1:XMLVAR_Tow_Release_Lever_Position)</POS_RELEASED_CHECK> <POS_PULLED_CODE>0 (&gt;L:1:XMLVAR_Tow_Release_Lever_Position)</POS_PULLED_CODE> <POS_RELEASED_CODE>1 (&gt;L:1:XMLVAR_Tow_Release_Lever_Position) 1 #SET_TOW_RELEASE#</POS_RELEASED_CODE> <UseParametersFn Name="ASOBO_Add_Set_Binding_Helper"> <EVENT_ID>TOW_PLANE_RELEASE</EVENT_ID> <PARAM_0>1</PARAM_0> </UseParametersFn> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Override

    ParametersFn used:

    • ASOBO_Tow_Release_Parameters

  Return parameters:

  Parameters set:

  • POS_PULLED_CHECK
  • POS_RELEASED_CHECK
  • POS_PULLED_CODE
  • POS_RELEASED_CODE (using SET_TOW_RELEASE)

  ParametersFn used:

  • ASOBO_Auto_Define_XStates_Variant_Helper
  • ASOBO_Watch_Simvar_Helper

    Parameters set:

    • SIMVAR (using SIMVAR_TOW_RELEASE)
  • ASOBO_Add_Set_Binding_Helper

    Parameters set:

    • EVENT_ID
    • PARAM_0

• ASOBO_Water_Rudder_Settings_Config#

  Definition from XML
  <ParametersFn Name="ASOBO_Water_Rudder_Settings_Config"> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Water_Rudder_Parameters"/> </Parameters> <ReturnParameters> <UseParametersFn Name="ASOBO_Auto_Define_XStates_Variant_Helper"/> <UseParametersFn Name="ASOBO_Watch_Simvar_Helper"> <SIMVAR>#SIMVAR_WATER_RUDDER#</SIMVAR> </UseParametersFn> <POS_UP_CHECK>#GET_WATER_RUDDER# !</POS_UP_CHECK> <POS_DOWN_CHECK>#GET_WATER_RUDDER#</POS_DOWN_CHECK> <POS_UP_CODE>0 #SET_WATER_RUDDER#</POS_UP_CODE> <POS_DOWN_CODE>1 #SET_WATER_RUDDER#</POS_DOWN_CODE> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Override

    ParametersFn used:

    • ASOBO_Water_Rudder_Parameters

  Return parameters:

  Parameters set:

  • POS_UP_CHECK (using GET_WATER_RUDDER)
  • POS_DOWN_CHECK (using GET_WATER_RUDDER)
  • POS_UP_CODE (using SET_WATER_RUDDER)
  • POS_DOWN_CODE (using SET_WATER_RUDDER)

  ParametersFn used:

  • ASOBO_Auto_Define_XStates_Variant_Helper
  • ASOBO_Watch_Simvar_Helper

    Parameters set:

    • SIMVAR (using SIMVAR_WATER_RUDDER)

• ASOBO_Water_Ballast_Settings_Config#

  Definition from XML
  <ParametersFn Name="ASOBO_Water_Ballast_Settings_Config"> <Parameters Type="Default"> <BALLAST_ID>1</BALLAST_ID> </Parameters> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Water_Ballast_Parameters"/> </Parameters> <ReturnParameters> <UseParametersFn Name="ASOBO_Auto_Define_XStates_Variant_Helper"/> <UseParametersFn Name="ASOBO_Watch_Simvar_Helper"> <SIMVAR>#SIMVAR_WATER_BALLAST_VALVE#</SIMVAR> </UseParametersFn> <POS_CLOSED_CHECK>#GET_WATER_BALLAST_VALVE# !</POS_CLOSED_CHECK> <POS_OPEN_CHECK>#GET_WATER_BALLAST_VALVE#</POS_OPEN_CHECK> <POS_CLOSED_CODE>0 #SET_WATER_BALLAST_VALVE#</POS_CLOSED_CODE> <POS_OPEN_CODE>1 #SET_WATER_BALLAST_VALVE#</POS_OPEN_CODE> <Condition Valid="DONT_BIND_TOGGLE_WATER_BALLAST_VALVE"> <False> <UseParametersFn Name="ASOBO_Add_Set_Binding_Helper"> <EVENT_ID>TOGGLE_WATER_BALLAST_VALVE</EVENT_ID> <PARAM_0>#GET_WATER_BALLAST_VALVE# !</PARAM_0> <PARAM_0_IS_DYNAMIC>True</PARAM_0_IS_DYNAMIC> </UseParametersFn> </False> </Condition> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Default

    Parameters set:

    • BALLAST_ID
  • Override

    ParametersFn used:

    • ASOBO_Water_Ballast_Parameters

  Return parameters:

  Parameters set:

  • POS_CLOSED_CHECK (using GET_WATER_BALLAST_VALVE)
  • POS_OPEN_CHECK (using GET_WATER_BALLAST_VALVE)
  • POS_CLOSED_CODE (using SET_WATER_BALLAST_VALVE)
  • POS_OPEN_CODE (using SET_WATER_BALLAST_VALVE)

  ParametersFn used:

  • ASOBO_Auto_Define_XStates_Variant_Helper
  • ASOBO_Watch_Simvar_Helper

    Parameters set:

    • SIMVAR (using SIMVAR_WATER_BALLAST_VALVE)

  Condition: Valid(DONT_BIND_TOGGLE_WATER_BALLAST_VALVE)

  • Case: False

    ParametersFn used:

    • ASOBO_Add_Set_Binding_Helper

      Parameters set:

      • EVENT_ID
      • PARAM_0 (using GET_WATER_BALLAST_VALVE)
      • PARAM_0_IS_DYNAMIC

• ASOBO_Yoke_Lock_Settings_Config#

  Definition from XML
  <ParametersFn Name="ASOBO_Yoke_Lock_Settings_Config"> <Parameters Type="Default"> <LOCK_MODE>@LockCenter</LOCK_MODE> <LOCK/> <IS_LOCKED/> </Parameters> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_YOKE_LOCK_Parameters"/> </Parameters> <Parameters Type="Override"> <Switch Param="LOCK_MODE"> <Case Value="@LockCenter"> <LOCK>#LOCK_CENTER#</LOCK> <IS_LOCKED>#IS_LOCK_CENTER#</IS_LOCKED> </Case> <Case Value="@LockFreeze"> <LOCK>#LOCK_FREEZE#</LOCK> <IS_LOCKED>#IS_LOCK_FREEZE#</IS_LOCKED> </Case> </Switch> </Parameters> <ReturnParameters> <UseParametersFn Name="ASOBO_Watch_Simvar_Helper"> <SIMVAR>#SIMVAR_YOKE_LOCK#</SIMVAR> </UseParametersFn> <UseParametersFn Name="ASOBO_Auto_Define_XStates_Variant_Helper"/> <POS_LOCK_CHECK>#IS_LOCKED#</POS_LOCK_CHECK> <POS_UNLOCK_CHECK>#IS_LOCKED# !</POS_UNLOCK_CHECK> <POS_LOCK_CODE>#LOCK#</POS_LOCK_CODE> <POS_UNLOCK_CODE>#UNLOCK#</POS_UNLOCK_CODE> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Default

    Parameters set:

    • LOCK_MODE
    • LOCK
    • IS_LOCKED
  • Override

    ParametersFn used:

    • ASOBO_YOKE_LOCK_Parameters
  • Override

    Condition: Switch(LOCK_MODE)

    • Case: @LockCenter

      Parameters set:

      • LOCK (using LOCK_CENTER)
      • IS_LOCKED (using IS_LOCK_CENTER)
    • Case: @LockFreeze

      Parameters set:

      • LOCK (using LOCK_FREEZE)
      • IS_LOCKED (using IS_LOCK_FREEZE)

  Return parameters:

  Parameters set:

  • POS_LOCK_CHECK (using IS_LOCKED)
  • POS_UNLOCK_CHECK (using IS_LOCKED)
  • POS_LOCK_CODE (using LOCK)
  • POS_UNLOCK_CODE (using UNLOCK)

  ParametersFn used:

  • ASOBO_Watch_Simvar_Helper

    Parameters set:

    • SIMVAR (using SIMVAR_YOKE_LOCK)
  • ASOBO_Auto_Define_XStates_Variant_Helper