Safety_Interactions

Asobo_EX1\Common\Interior\Templates\ParametersFn\InteractionPresets\Safety_Interactions.xml#

ParametersFn

• ASOBO_ELT_State_Settings_Config#

  Definition from XML
  <ParametersFn Name="ASOBO_ELT_State_Settings_Config"> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_ELT_Parameters"/> </Parameters> <Parameters Type="Override"> <VAR_ELT_TEST_NAME>XMLVAR_ELT_TEST</VAR_ELT_TEST_NAME> <VAR_SCOPE_ELT_TEST>L:1</VAR_SCOPE_ELT_TEST> </Parameters> <Parameters Type="Override"> <VAR_ELT_TEST>#VAR_SCOPE_ELT_TEST#:#VAR_ELT_TEST_NAME#</VAR_ELT_TEST> </Parameters> <Parameters Type="Default"> <GET_ELT_TEST>(#VAR_ELT_TEST#)</GET_ELT_TEST> <SET_ELT_TEST>(&gt;#VAR_ELT_TEST#)</SET_ELT_TEST> </Parameters> <ReturnParameters> <UseParametersFn Name="ASOBO_Auto_Define_XStates_Variant_Helper"/> <UseParametersFn Name="ASOBO_Watch_SimVar_Helper"> <SIMVAR>#SIMVAR_ELT#</SIMVAR> </UseParametersFn> <UseParametersFn Name="ASOBO_Watch_LocalVar_Helper"> <LOCAL_VAR>#VAR_ELT_TEST_NAME#</LOCAL_VAR> <VAR_SCOPE>#VAR_SCOPE_ELT_TEST#</VAR_SCOPE> </UseParametersFn> <POS_ON_CHECK>#GET_ELT#</POS_ON_CHECK> <POS_ARMED_CHECK>#GET_ELT# ! #GET_ELT_TEST# ! and</POS_ARMED_CHECK> <POS_TEST_CHECK>#GET_ELT# ! #GET_ELT_TEST# and</POS_TEST_CHECK> <POS_ON_CODE>1 #SET_ELT# 0 #SET_ELT_TEST#</POS_ON_CODE> <POS_ARMED_CODE>0 #SET_ELT# 0 #SET_ELT_TEST#</POS_ARMED_CODE> <POS_TEST_CODE>0 #SET_ELT# 1 #SET_ELT_TEST#</POS_TEST_CODE> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Override

    ParametersFn used:

    • ASOBO_ELT_Parameters
  • Override

    Parameters set:

    • VAR_ELT_TEST_NAME
    • VAR_SCOPE_ELT_TEST
  • Override

    Parameters set:

    • VAR_ELT_TEST (using VAR_SCOPE_ELT_TEST, VAR_ELT_TEST_NAME)
  • Default

    Parameters set:

    • GET_ELT_TEST (using VAR_ELT_TEST)
    • SET_ELT_TEST (using VAR_ELT_TEST)

  Return parameters:

  Parameters set:

  • POS_ON_CHECK (using GET_ELT)
  • POS_ARMED_CHECK (using GET_ELT, GET_ELT_TEST)
  • POS_TEST_CHECK (using GET_ELT, GET_ELT_TEST)
  • POS_ON_CODE (using SET_ELT, SET_ELT_TEST)
  • POS_ARMED_CODE (using SET_ELT, SET_ELT_TEST)
  • POS_TEST_CODE (using SET_ELT, SET_ELT_TEST)

  ParametersFn used:

  • ASOBO_Auto_Define_XStates_Variant_Helper
  • ASOBO_Watch_SimVar_Helper

    Parameters set:

    • SIMVAR (using SIMVAR_ELT)
  • ASOBO_Watch_LocalVar_Helper

    Parameters set:

    • LOCAL_VAR (using VAR_ELT_TEST_NAME)
    • VAR_SCOPE (using VAR_SCOPE_ELT_TEST)

• ASOBO_Wipers_Control_Settings_Config#

  Definition from XML
  <ParametersFn Name="ASOBO_Wipers_Control_Settings_Config"> <Parameters Type="Default"> <WIPER_SWITCH_NAME>WIPER_SWITCH</WIPER_SWITCH_NAME> </Parameters> <Parameters Type="Default"> <WIPER_SWITCH_POSITION_VAR>XMLVAR_#WIPER_SWITCH_NAME#_POSITION</WIPER_SWITCH_POSITION_VAR> </Parameters> <Parameters Type="Default"> <GET_WIPERS_SWITCH_POSITION>(L:1:#WIPER_SWITCH_POSITION_VAR#)</GET_WIPERS_SWITCH_POSITION> <SET_WIPERS_SWITCH_POSITION>(&gt;L:1:#WIPER_SWITCH_POSITION_VAR#)</SET_WIPERS_SWITCH_POSITION> </Parameters> <ReturnParameters> <UseParametersFn Name="ASOBO_Auto_Define_XStates_Variant_Helper"/> <POS_OFF_CHECK>#GET_WIPERS_SWITCH_POSITION# 0 ==</POS_OFF_CHECK> <POS_INT_CHECK>#GET_WIPERS_SWITCH_POSITION# 1 ==</POS_INT_CHECK> <POS_LOW_CHECK>#GET_WIPERS_SWITCH_POSITION# 2 ==</POS_LOW_CHECK> <POS_HIGH_CHECK>#GET_WIPERS_SWITCH_POSITION# 3 ==</POS_HIGH_CHECK> <POS_OFF_CODE>0 #SET_WIPERS_SWITCH_POSITION#</POS_OFF_CODE> <POS_INT_CODE>1 #SET_WIPERS_SWITCH_POSITION#</POS_INT_CODE> <POS_LOW_CODE>2 #SET_WIPERS_SWITCH_POSITION#</POS_LOW_CODE> <POS_HIGH_CODE>3 #SET_WIPERS_SWITCH_POSITION#</POS_HIGH_CODE> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Default

    Parameters set:

    • WIPER_SWITCH_NAME
  • Default

    Parameters set:

    • WIPER_SWITCH_POSITION_VAR (using WIPER_SWITCH_NAME)
  • Default

    Parameters set:

    • GET_WIPERS_SWITCH_POSITION (using WIPER_SWITCH_POSITION_VAR)
    • SET_WIPERS_SWITCH_POSITION (using WIPER_SWITCH_POSITION_VAR)

  Return parameters:

  Parameters set:

  • POS_OFF_CHECK (using GET_WIPERS_SWITCH_POSITION)
  • POS_INT_CHECK (using GET_WIPERS_SWITCH_POSITION)
  • POS_LOW_CHECK (using GET_WIPERS_SWITCH_POSITION)
  • POS_HIGH_CHECK (using GET_WIPERS_SWITCH_POSITION)
  • POS_OFF_CODE (using SET_WIPERS_SWITCH_POSITION)
  • POS_INT_CODE (using SET_WIPERS_SWITCH_POSITION)
  • POS_LOW_CODE (using SET_WIPERS_SWITCH_POSITION)
  • POS_HIGH_CODE (using SET_WIPERS_SWITCH_POSITION)

  ParametersFn used:

  • ASOBO_Auto_Define_XStates_Variant_Helper

• Get_Procedure_Wipers_Parameters#

  Definition from XML
  <ParametersFn Name="Get_Procedure_Wipers_Parameters"> <Parameters Type="Default"> <SLOW_MOVE_SPEED_PER_SECOND>100</SLOW_MOVE_SPEED_PER_SECOND> <FAST_MOVE_SPEED_PER_SECOND>200</FAST_MOVE_SPEED_PER_SECOND> <INTERMITTENT_COOLDOWN_SECOND>7</INTERMITTENT_COOLDOWN_SECOND> <WIPER_NAME>WIPER</WIPER_NAME> <WIPER_SWITCH_NAME>WIPER_SWITCH</WIPER_SWITCH_NAME> </Parameters> <Parameters Type="Default"> <WIPER_POSITION_VAR>XMLVAR_#WIPER_NAME#_POSITION</WIPER_POSITION_VAR> <WIPER_SWITCH_POSITION_VAR>XMLVAR_#WIPER_SWITCH_NAME#_POSITION</WIPER_SWITCH_POSITION_VAR> </Parameters> <Parameters Type="Default"> <POS_PARK>0</POS_PARK> <POS_INT>1</POS_INT> <POS_LOW>2</POS_LOW> <POS_HIGH>3</POS_HIGH> <GET_WIPER_POSITION>(L:1:#WIPER_POSITION_VAR#)</GET_WIPER_POSITION> <SET_WIPER_POSITION>(&gt;L:1:#WIPER_POSITION_VAR#)</SET_WIPER_POSITION> <GET_SWITCH_POS>(L:1:#WIPER_SWITCH_POSITION_VAR#)</GET_SWITCH_POS> <GET_STORED_POSITION>(O:XMLVAR_#WIPER_NAME#_SWITCH_POSITION)</GET_STORED_POSITION> <SET_STORED_POSITION>(&gt;O:XMLVAR_#WIPER_NAME#_SWITCH_POSITION)</SET_STORED_POSITION> <GET_WIPER_SPEED>(O:XMLVAR_#WIPER_NAME#_SPEED)</GET_WIPER_SPEED> <SET_WIPER_SPEED>(&gt;O:XMLVAR_#WIPER_NAME#_SPEED)</SET_WIPER_SPEED> <GET_WIPER_GOAL>(O:XMLVAR_#WIPER_NAME#_GOAL)</GET_WIPER_GOAL> <SET_WIPER_GOAL>(&gt;O:XMLVAR_#WIPER_NAME#_GOAL)</SET_WIPER_GOAL> <GET_LAST_WIPER_INT_UPDATE>(O:XMLVAR_#WIPER_NAME#_INT_UPDATE)</GET_LAST_WIPER_INT_UPDATE> <SET_LAST_WIPER_INT_UPDATE>(&gt;O:XMLVAR_#WIPER_NAME#_INT_UPDATE)</SET_LAST_WIPER_INT_UPDATE> <Condition NotEmpty="CIRCUIT_NAME"> <True> <ELECTRICAL_CIRCUIT>CIRCUIT ON:#CIRCUIT_NAME#</ELECTRICAL_CIRCUIT> </True> <False> <ELECTRICAL_CIRCUIT>CIRCUIT GENERAL PANEL ON</ELECTRICAL_CIRCUIT> </False> </Condition> </Parameters> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Move_Interpolation_Helper"> <START_VALUE>#GET_WIPER_POSITION#</START_VALUE> <SET_NEW_VALUE>#SET_WIPER_POSITION#</SET_NEW_VALUE> <END_VALUE>#GET_WIPER_GOAL#</END_VALUE> <COEFFICIENT>#GET_WIPER_SPEED# @TICK_Get_Delta_Time *</COEFFICIENT> <OUT_PARAM_NAME>UPDATE_WIPER_POSITION</OUT_PARAM_NAME> </UseParametersFn> </Parameters> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Procedure_Next_Safe_Jump_Flag_Helper"> <OUT_PARAM_NAME>AFTER_POS_CHANGED</OUT_PARAM_NAME> </UseParametersFn> <UseParametersFn Name="ASOBO_Procedure_Next_Safe_Jump_Flag_Helper"> <OUT_PARAM_NAME>AFTER_POS_TICK</OUT_PARAM_NAME> </UseParametersFn> </Parameters> <Parameters Type="Override"> <ON_POS_CHANGED> l0 #POS_HIGH# == if{ #FAST_MOVE_SPEED_PER_SECOND# #SET_WIPER_SPEED# g#AFTER_POS_CHANGED# } els{ #SLOW_MOVE_SPEED_PER_SECOND# #SET_WIPER_SPEED# g#AFTER_POS_CHANGED# } :#AFTER_POS_CHANGED# </ON_POS_CHANGED> <ON_POS_TICK> l0 #POS_PARK# == if{ (* Park *) #GET_WIPER_GOAL# sp1 g#AFTER_POS_TICK# } l0 #POS_INT# == if{ (* Intermittent *) #GET_WIPER_GOAL# sp1 @E_SimulationTime #GET_LAST_WIPER_INT_UPDATE# - #INTERMITTENT_COOLDOWN_SECOND# &gt; if{ @E_SimulationTime #SET_LAST_WIPER_INT_UPDATE# 0 100 #GET_WIPER_GOAL# 50 &gt; ? sp1 } g#AFTER_POS_TICK# } l0 #POS_LOW# == l0 #POS_HIGH# == or if{ (* Low or High *) #GET_WIPER_GOAL# #GET_WIPER_POSITION# == if{ 0 100 #GET_WIPER_GOAL# 50 &gt; ? sp1 } els{ #GET_WIPER_GOAL# sp1 } g#AFTER_POS_TICK# } :#AFTER_POS_TICK# #GET_WIPER_GOAL# l1 != if{ l1 #SET_WIPER_GOAL# } </ON_POS_TICK> </Parameters> <Parameters Type="Override"> <THIS_WIPER_UPDATE> #GET_SWITCH_POS# s0 #GET_STORED_POSITION# != if{ l0 #SET_STORED_POSITION# } els{ g#AFTER_POS_CHANGED# } #ON_POS_CHANGED# #ON_POS_TICK# (A:#ELECTRICAL_CIRCUIT#, Bool) if{ #UPDATE_WIPER_POSITION# } </THIS_WIPER_UPDATE> </Parameters> <ReturnParameters> <TICK_EVERY_FRAME>True</TICK_EVERY_FRAME> <ON_VALUE_CHANGED>#THIS_WIPER_UPDATE#</ON_VALUE_CHANGED> </ReturnParameters> </ParametersFn>

  Parameters initialization:

  • Default

    Parameters set:

    • SLOW_MOVE_SPEED_PER_SECOND
    • FAST_MOVE_SPEED_PER_SECOND
    • INTERMITTENT_COOLDOWN_SECOND
    • WIPER_NAME
    • WIPER_SWITCH_NAME
  • Default

    Parameters set:

    • WIPER_POSITION_VAR (using WIPER_NAME)
    • WIPER_SWITCH_POSITION_VAR (using WIPER_SWITCH_NAME)
  • Default

    Parameters set:

    • POS_PARK
    • POS_INT
    • POS_LOW
    • POS_HIGH
    • GET_WIPER_POSITION (using WIPER_POSITION_VAR)
    • SET_WIPER_POSITION (using WIPER_POSITION_VAR)
    • GET_SWITCH_POS (using WIPER_SWITCH_POSITION_VAR)
    • GET_STORED_POSITION (using WIPER_NAME)
    • SET_STORED_POSITION (using WIPER_NAME)
    • GET_WIPER_SPEED (using WIPER_NAME)
    • SET_WIPER_SPEED (using WIPER_NAME)
    • GET_WIPER_GOAL (using WIPER_NAME)
    • SET_WIPER_GOAL (using WIPER_NAME)
    • GET_LAST_WIPER_INT_UPDATE (using WIPER_NAME)
    • SET_LAST_WIPER_INT_UPDATE (using WIPER_NAME)

    Condition: NotEmpty(CIRCUIT_NAME)

    • Case: True

      Parameters set:

      • ELECTRICAL_CIRCUIT (using CIRCUIT_NAME)
    • Case: False

      Parameters set:

      • ELECTRICAL_CIRCUIT
  • Override

    ParametersFn used:

    • ASOBO_Move_Interpolation_Helper

      Parameters set:

      • START_VALUE (using GET_WIPER_POSITION)
      • SET_NEW_VALUE (using SET_WIPER_POSITION)
      • END_VALUE (using GET_WIPER_GOAL)
      • COEFFICIENT (using GET_WIPER_SPEED)
      • OUT_PARAM_NAME
  • Override

    ParametersFn used:

    • ASOBO_Procedure_Next_Safe_Jump_Flag_Helper

      Parameters set:

      • OUT_PARAM_NAME
    • ASOBO_Procedure_Next_Safe_Jump_Flag_Helper

      Parameters set:

      • OUT_PARAM_NAME
  • Override

    Parameters set:

    • ON_POS_CHANGED (using POS_HIGH, FAST_MOVE_SPEED_PER_SECOND, SET_WIPER_SPEED, AFTER_POS_CHANGED, SLOW_MOVE_SPEED_PER_SECOND)
    • ON_POS_TICK (using POS_PARK, GET_WIPER_GOAL, AFTER_POS_TICK, POS_INT, GET_LAST_WIPER_INT_UPDATE, INTERMITTENT_COOLDOWN_SECOND, SET_LAST_WIPER_INT_UPDATE, POS_LOW, POS_HIGH, GET_WIPER_POSITION, SET_WIPER_GOAL)
  • Override

    Parameters set:

    • THIS_WIPER_UPDATE (using GET_SWITCH_POS, GET_STORED_POSITION, SET_STORED_POSITION, AFTER_POS_CHANGED, ON_POS_CHANGED, ON_POS_TICK, ELECTRICAL_CIRCUIT, UPDATE_WIPER_POSITION)

  Return parameters:

  Parameters set:

  • TICK_EVERY_FRAME
  • ON_VALUE_CHANGED (using THIS_WIPER_UPDATE)