Pneumatics_ParametersFn
Asobo_EX1\Common\Interior\Templates\ParametersFn\Pneumatics_ParametersFn.xml
Source XML
<ModelBehaviors>
<!-- #################################### PNEUMATICS ############################## -->
<!-- ############################################################################## -->
<Include RelativeFile="InteractionPresets\\Pneumatics_Interactions.xml"/>
<!-- ############################################################################## -->
<!-- APU Bleed -->
<ParametersFn Name="ASOBO_APU_Bleed_Parameters">
<Parameters Type="Default">
<SIMVAR_APU_BLEED_AIR>BLEED AIR APU</SIMVAR_APU_BLEED_AIR>
</Parameters>
<Parameters Type="Default">
<GET_APU_BLEED_AIR>(A:#SIMVAR_APU_BLEED_AIR#, Bool)</GET_APU_BLEED_AIR>
</Parameters>
<Parameters Type="Default">
<SET_APU_BLEED_AIR>(>K:APU_BLEED_AIR_SOURCE_SET)</SET_APU_BLEED_AIR>
<TOGGLE_APU_BLEED_AIR>(>K:APU_BLEED_AIR_SOURCE_TOGGLE)</TOGGLE_APU_BLEED_AIR>
</Parameters>
<ReturnParameters>
<SIMVAR_APU_BLEED_AIR>#SIMVAR_APU_BLEED_AIR#</SIMVAR_APU_BLEED_AIR>
<SET_APU_BLEED_AIR>#SET_APU_BLEED_AIR#</SET_APU_BLEED_AIR>
<TOGGLE_APU_BLEED_AIR>#TOGGLE_APU_BLEED_AIR#</TOGGLE_APU_BLEED_AIR>
<GET_APU_BLEED_AIR>#GET_APU_BLEED_AIR#</GET_APU_BLEED_AIR>
</ReturnParameters>
</ParametersFn>
<!-- ############################################################################## -->
<!-- Engine Bleed -->
<ParametersFn Name="ASOBO_Engine_Bleed_Parameters">
<Parameters Type="Override">
<UseParametersFn Name="ASOBO_Get_Param_Suffix_Helper"/>
</Parameters>
<Parameters Type="Default">
<ENG_ID>1</ENG_ID>
</Parameters>
<Parameters Type="Default">
<SIMVAR_ENGINE_BLEED_AIR>BLEED AIR ENGINE:#ENG_ID#</SIMVAR_ENGINE_BLEED_AIR>
<SIMVAR_ENGINE_BLEED_AIR_TURBINE>TURB ENG BLEED AIR:#ENG_ID#</SIMVAR_ENGINE_BLEED_AIR_TURBINE>
<UNITS_ENGINE_BLEED_AIR_TURBINE>psi</UNITS_ENGINE_BLEED_AIR_TURBINE>
</Parameters>
<Parameters Type="Default">
<GET_ENGINE_BLEED_AIR>(A:#SIMVAR_ENGINE_BLEED_AIR#, Bool)</GET_ENGINE_BLEED_AIR>
<GET_ENGINE_BLEED_AIR_TURBINE>(A:#SIMVAR_ENGINE_BLEED_AIR_TURBINE#, #UNITS_ENGINE_BLEED_AIR_TURBINE#)</GET_ENGINE_BLEED_AIR_TURBINE>
</Parameters>
<Parameters Type="Default">
<SET_ENGINE_BLEED_AIR>#ENG_ID# (>K:2:ENGINE_BLEED_AIR_SOURCE_SET)</SET_ENGINE_BLEED_AIR>
<TOGGLE_ENGINE_BLEED_AIR>#ENG_ID# (>K:ENGINE_BLEED_AIR_SOURCE_TOGGLE)</TOGGLE_ENGINE_BLEED_AIR>
</Parameters>
<ReturnParameters>
<SIMVAR_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR>#SIMVAR_ENGINE_BLEED_AIR#</SIMVAR_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR>
<SIMVAR_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR_TURBINE>#SIMVAR_ENGINE_BLEED_AIR#</SIMVAR_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR_TURBINE>
<GET_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR>#GET_ENGINE_BLEED_AIR#</GET_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR>
<GET_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR_TURBINE>#GET_ENGINE_BLEED_AIR_TURBINE#</GET_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR_TURBINE>
<SET_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR>#SET_ENGINE_BLEED_AIR#</SET_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR>
<TOGGLE_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR>#TOGGLE_ENGINE_BLEED_AIR#</TOGGLE_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR>
</ReturnParameters>
</ParametersFn>
<!-- ############################################################################## -->
<ParametersFn Name="ASOBO_Pressurization_Parameters">
<Parameters Type="Default">
<SIMVAR_DUMP_SWITCH>PRESSURIZATION DUMP SWITCH</SIMVAR_DUMP_SWITCH>
<SIMVAR_CABIN_ALTITUDE>PRESSURIZATION CABIN ALTITUDE</SIMVAR_DUMP_SWITCH>
<SIMVAR_CABIN_ALTITUDE_GOAL>PRESSURIZATION CABIN ALTITUDE GOAL</SIMVAR_CABIN_ALTITUDE_GOAL>
<SIMVAR_CABIN_ALTITUDE_RATE>PRESSURIZATION CABIN ALTITUDE RATE</SIMVAR_CABIN_ALTITUDE_RATE>
<SIMVAR_PRESSURE_DIFFERENTIAL>PRESSURIZATION PRESSURE DIFFERENTIAL</SIMVAR_PRESSURE_DIFFERENTIAL>
<UNITS_CABIN_ALTITUDE>feet</UNITS_CABIN_ALTITUDE>
<UNITS_CABIN_ALTITUDE_GOAL>feet</UNITS_CABIN_ALTITUDE_GOAL>
<UNITS_CABIN_ALTITUDE_RATE>feet per second</UNITS_CABIN_ALTITUDE_RATE>
<UNITS_PRESSURE_DIFFERENTIAL>psf</UNITS_PRESSURE_DIFFERENTIAL>
</Parameters>
<Parameters Type="Default">
<GET_DUMP_SWITCH>(A:#SIMVAR_DUMP_SWITCH#, Bool)</GET_DUMP_SWITCH>
<GET_CABIN_ALTITUDE>(A:#SIMVAR_CABIN_ALTITUDE#, #UNITS_CABIN_ALTITUDE#)</GET_DUMP_SWITCH>
<GET_CABIN_ALTITUDE_GOAL>(A:#SIMVAR_CABIN_ALTITUDE_GOAL#, #UNITS_CABIN_ALTITUDE_GOAL#)</GET_CABIN_ALTITUDE_GOAL>
<GET_CABIN_ALTITUDE_RATE>(A:#SIMVAR_CABIN_ALTITUDE_RATE#, #UNITS_CABIN_ALTITUDE_RATE#)</GET_CABIN_ALTITUDE_RATE>
<GET_PRESSURE_DIFFERENTIAL>(A:#SIMVAR_PRESSURE_DIFFERENTIAL#, #UNITS_PRESSURE_DIFFERENTIAL#)</GET_PRESSURE_DIFFERENTIAL>
</Parameters>
<Parameters Type="Default">
<TOGGLE_DUMP_SWITCH>(>K:PRESSURIZATION_PRESSURE_DUMP_SWITCH)</TOGGLE_DUMP_SWITCH>
<SET_DUMP_SWITCH>#GET_DUMP_SWITCH# != if{ (>K:PRESSURIZATION_PRESSURE_DUMP_SWITCH) }</SET_DUMP_SWITCH>
<INC_CABIN_ALTITUDE_GOAL>(>K:PRESSURIZATION_PRESSURE_ALT_INC)</INC_CABIN_ALTITUDE_GOAL>
<DEC_CABIN_ALTITUDE_GOAL>(>K:PRESSURIZATION_PRESSURE_ALT_DEC)</DEC_CABIN_ALTITUDE_GOAL>
<INC_CABIN_ALTITUDE_RATE>(>K:PRESSURIZATION_CLIMB_RATE_INC)</INC_CABIN_ALTITUDE_RATE>
<DEC_CABIN_ALTITUDE_RATE>(>K:PRESSURIZATION_CLIMB_RATE_DEC)</DEC_CABIN_ALTITUDE_RATE>
</Parameters>
<ReturnParameters>
<SIMVAR_DUMP_SWITCH>#SIMVAR_DUMP_SWITCH#</SIMVAR_DUMP_SWITCH>
<SIMVAR_CABIN_ALTITUDE>#SIMVAR_CABIN_ALTITUDE#</SIMVAR_DUMP_SWITCH>
<SIMVAR_CABIN_ALTITUDE_GOAL>#SIMVAR_CABIN_ALTITUDE_GOAL#</SIMVAR_CABIN_ALTITUDE_GOAL>
<SIMVAR_CABIN_ALTITUDE_RATE>#SIMVAR_CABIN_ALTITUDE_RATE#</SIMVAR_CABIN_ALTITUDE_RATE>
<SIMVAR_PRESSURE_DIFFERENTIAL>#SIMVAR_PRESSURE_DIFFERENTIAL#</SIMVAR_PRESSURE_DIFFERENTIAL>
<TOGGLE_DUMP_SWITCH>#TOGGLE_DUMP_SWITCH#</TOGGLE_DUMP_SWITCH>
<SET_DUMP_SWITCH>#SET_DUMP_SWITCH#</SET_DUMP_SWITCH>
<INC_CABIN_ALTITUDE_GOAL>#INC_CABIN_ALTITUDE_GOAL#</INC_CABIN_ALTITUDE_GOAL>
<DEC_CABIN_ALTITUDE_GOAL>#DEC_CABIN_ALTITUDE_GOAL#</DEC_CABIN_ALTITUDE_GOAL>
<INC_CABIN_ALTITUDE_RATE>#INC_CABIN_ALTITUDE_RATE#</INC_CABIN_ALTITUDE_RATE>
<DEC_CABIN_ALTITUDE_RATE>#DEC_CABIN_ALTITUDE_RATE#</DEC_CABIN_ALTITUDE_RATE>
<GET_DUMP_SWITCH>#GET_DUMP_SWITCH#</GET_DUMP_SWITCH>
<GET_CABIN_ALTITUDE>#GET_CABIN_ALTITUDE#</GET_DUMP_SWITCH>
<GET_CABIN_ALTITUDE_GOAL>#GET_CABIN_ALTITUDE_GOAL#</GET_CABIN_ALTITUDE_GOAL>
<GET_CABIN_ALTITUDE_RATE>#GET_CABIN_ALTITUDE_RATE#</GET_CABIN_ALTITUDE_RATE>
<GET_PRESSURE_DIFFERENTIAL>#GET_PRESSURE_DIFFERENTIAL#</GET_PRESSURE_DIFFERENTIAL>
</ReturnParameters>
</ParametersFn>
<!-- ############################################################################## -->
<ParametersFn Name="ASOBO_Pneumatics_Sim_Parameters">
<Parameters Type="Default">
<SIMVAR_AIRCRAFT_PRESSURE>PNEUMATICS AIRCRAFT PRESSURE</SIMVAR_AIRCRAFT_PRESSURE>
<SIMVAR_AREAS_MAX_TEMPERATURE>PNEUMATICS AREAS MAX TEMPERATURE</SIMVAR_AREAS_MAX_TEMPERATURE>
<SIMVAR_AREAS_MIN_TEMPERATURE>PNEUMATICS AREAS MIN TEMPERATURE</SIMVAR_AREAS_MIN_TEMPERATURE>
<SIMVAR_CABIN_ALTITUDE>PNEUMATICS CABIN ALTITUDE</SIMVAR_CABIN_ALTITUDE>
<SIMVAR_CABIN_ALTITUDE_RATE>PNEUMATICS CABIN ALTITUDE RATE</SIMVAR_CABIN_ALTITUDE_RATE>
<SIMVAR_DIFFERENTIAL_PRESSURE>PNEUMATICS DIFFERENTIAL PRESSURE</SIMVAR_DIFFERENTIAL_PRESSURE>
<SIMVAR_TARGET_CABIN_ALTITUDE>PNEUMATICS TARGET CABIN ALTITUDE</SIMVAR_TARGET_CABIN_ALTITUDE>
<UNITS_AIRCRAFT_PRESSURE>kilopascal</UNITS_AIRCRAFT_PRESSURE>
<UNITS_AREAS_MAX_TEMPERATURE>celsius</UNITS_AREAS_MAX_TEMPERATURE>
<UNITS_AREAS_MIN_TEMPERATURE>celsius</UNITS_AREAS_MIN_TEMPERATURE>
<UNITS_CABIN_ALTITUDE>Feet</UNITS_CABIN_ALTITUDE>
<UNITS_CABIN_ALTITUDE_RATE>Feet per second</UNITS_CABIN_ALTITUDE_RATE>
<UNITS_DIFFERENTIAL_PRESSURE>psi</UNITS_DIFFERENTIAL_PRESSURE>
<UNITS_TARGET_CABIN_ALTITUDE>Feet</UNITS_TARGET_CABIN_ALTITUDE>
</Parameters>
<Parameters Type="Default">
<GET_AIRCRAFT_PRESSURE>(A:#SIMVAR_AIRCRAFT_PRESSURE#, #UNITS_AIRCRAFT_PRESSURE#)</GET_AIRCRAFT_PRESSURE>
<GET_AREAS_MAX_TEMPERATURE>(A:#SIMVAR_AREAS_MAX_TEMPERATURE#, #UNITS_AREAS_MAX_TEMPERATURE#)</GET_AREAS_MAX_TEMPERATURE>
<GET_AREAS_MIN_TEMPERATURE>(A:#SIMVAR_AREAS_MIN_TEMPERATURE#, #UNITS_AREAS_MIN_TEMPERATURE#)</GET_AREAS_MIN_TEMPERATURE>
<GET_CABIN_ALTITUDE>(A:#SIMVAR_CABIN_ALTITUDE#, #UNITS_CABIN_ALTITUDE#)</GET_CABIN_ALTITUDE>
<GET_CABIN_ALTITUDE_RATE>(A:#SIMVAR_CABIN_ALTITUDE_RATE#, #UNITS_CABIN_ALTITUDE_RATE#)</GET_CABIN_ALTITUDE_RATE>
<GET_DIFFERENTIAL_PRESSURE>(A:#SIMVAR_DIFFERENTIAL_PRESSURE#, #UNITS_DIFFERENTIAL_PRESSURE#)</GET_DIFFERENTIAL_PRESSURE>
<GET_TARGET_CABIN_ALTITUDE>(A:#SIMVAR_TARGET_CABIN_ALTITUDE#, #UNITS_TARGET_CABIN_ALTITUDE#)</GET_TARGET_CABIN_ALTITUDE>
</Parameters>
<Parameters Type="Default">
<SET_TARGET_CABIN_ALTITUDE>(>K:PNEUMATICS_TARGET_CABIN_ALTITUDE_SET)</SET_TARGET_CABIN_ALTITUDE>
</Parameters>
<ReturnParameters>
<SIMVAR_AIRCRAFT_PRESSURE>#SIMVAR_AIRCRAFT_PRESSURE#</SIMVAR_AIRCRAFT_PRESSURE>
<SIMVAR_AREAS_MAX_TEMPERATURE>#SIMVAR_AREAS_MAX_TEMPERATURE#</SIMVAR_AREAS_MAX_TEMPERATURE>
<SIMVAR_AREAS_MIN_TEMPERATURE>#SIMVAR_AREAS_MIN_TEMPERATURE#</SIMVAR_AREAS_MIN_TEMPERATURE>
<SIMVAR_CABIN_ALTITUDE>#SIMVAR_CABIN_ALTITUDE#</SIMVAR_CABIN_ALTITUDE>
<SIMVAR_CABIN_ALTITUDE_RATE>#SIMVAR_CABIN_ALTITUDE_RATE#</SIMVAR_CABIN_ALTITUDE_RATE>
<SIMVAR_DIFFERENTIAL_PRESSURE>#SIMVAR_DIFFERENTIAL_PRESSURE#</SIMVAR_DIFFERENTIAL_PRESSURE>
<SIMVAR_TARGET_CABIN_ALTITUDE>#SIMVAR_TARGET_CABIN_ALTITUDE#</SIMVAR_TARGET_CABIN_ALTITUDE>
<GET_AIRCRAFT_PRESSURE>#GET_AIRCRAFT_PRESSURE#</GET_AIRCRAFT_PRESSURE>
<GET_AREAS_MAX_TEMPERATURE>#GET_AREAS_MAX_TEMPERATURE#</GET_AREAS_MAX_TEMPERATURE>
<GET_AREAS_MIN_TEMPERATURE>#GET_AREAS_MIN_TEMPERATURE#</GET_AREAS_MIN_TEMPERATURE>
<GET_CABIN_ALTITUDE>#GET_CABIN_ALTITUDE#</GET_CABIN_ALTITUDE>
<GET_CABIN_ALTITUDE_RATE>#GET_CABIN_ALTITUDE_RATE#</GET_CABIN_ALTITUDE_RATE>
<GET_DIFFERENTIAL_PRESSURE>#GET_DIFFERENTIAL_PRESSURE#</GET_DIFFERENTIAL_PRESSURE>
<GET_TARGET_CABIN_ALTITUDE>#GET_TARGET_CABIN_ALTITUDE#</GET_TARGET_CABIN_ALTITUDE>
<SET_TARGET_CABIN_ALTITUDE>#SET_TARGET_CABIN_ALTITUDE#</SET_TARGET_CABIN_ALTITUDE>
</ReturnParameters>
</ParametersFn>
<!-- ############################################################################## -->
<ParametersFn Name="ASOBO_Pneumatics_Duct_Parameters">
<Parameters Type="Override">
<UseParametersFn Name="ASOBO_Get_Param_Suffix_Helper"/>
</Parameters>
<Parameters Type="Default">
<PACK_ID>1</PACK_ID> <!-- Duct pressure is read at the pack entry -->
<AREA_ID>1</AREA_ID> <!-- Duct temperature is read at the area entry -->
</Parameters>
<Parameters Type="Default">
<SIMVAR_DUCT_PRESSURE>PNEUMATICS DUCT PRESSURE:#PACK_ID#</SIMVAR_DUCT_PRESSURE>
<SIMVAR_DUCT_TEMPERATURE>PNEUMATICS DUCT TEMPERATURE:#AREA_ID#</SIMVAR_DUCT_TEMPERATURE>
<UNITS_DUCT_PRESSURE>psi</UNITS_DUCT_PRESSURE>
<UNITS_DUCT_TEMPERATURE>celsius</UNITS_DUCT_TEMPERATURE>
</Parameters>
<Parameters Type="Default">
<GET_DUCT_PRESSURE>(A:#SIMVAR_DUCT_PRESSURE#, #UNITS_DUCT_PRESSURE#)</GET_DUCT_PRESSURE>
<GET_DUCT_TEMPERATURE>(A:#SIMVAR_DUCT_TEMPERATURE#, #UNITS_DUCT_TEMPERATURE#)</GET_DUCT_TEMPERATURE>
</Parameters>
<ReturnParameters>
<SIMVAR_DUCT#OUT_PARAM_SUFFIX#_PRESSURE>#SIMVAR_DUCT_PRESSURE#</SIMVAR_DUCT#OUT_PARAM_SUFFIX#_PRESSURE>
<SIMVAR_DUCT#OUT_PARAM_SUFFIX#_TEMPERATURE>#SIMVAR_DUCT_TEMPERATURE#</SIMVAR_DUCT#OUT_PARAM_SUFFIX#_TEMPERATURE>
<GET_DUCT#OUT_PARAM_SUFFIX#_PRESSURE>#GET_DUCT_PRESSURE#</GET_DUCT#OUT_PARAM_SUFFIX#_PRESSURE>
<GET_DUCT#OUT_PARAM_SUFFIX#_TEMPERATURE>#GET_DUCT_TEMPERATURE#</GET_DUCT#OUT_PARAM_SUFFIX#_TEMPERATURE>
</ReturnParameters>
</ParametersFn>
<ParametersFn Name="ASOBO_Pneumatics_Duct_Overheat_Parameters">
<Parameters Type="Override">
<UseParametersFn Name="ASOBO_Pneumatics_Duct_Parameters"/>
</Parameters>
<Parameters Type="Default">
<OVERHEAT_TEMP>40</OVERHEAT_TEMP>
</Parameters>
<ReturnParameters>
<IS_OVERHEATING>#GET_DUCT_TEMPERATURE# #OVERHEAT_TEMP# ></IS_OVERHEATING>
</ReturnParameters>
</ParametersFn>
<ParametersFn Name="ASOBO_Pneumatics_Duct_Overheat_Emissive_Parameters">
<Parameters Type="Override">
<UseParametersFn Name="ASOBO_Pneumatics_Duct_Overheat_Parameters"/>
</Parameters>
<ReturnParameters>
<EMISSIVE_CODE>#IS_OVERHEATING#</EMISSIVE_CODE>
</ReturnParameters>
</ParametersFn>
<!-- ############################################################################## -->
<ParametersFn Name="ASOBO_Pneumatics_APU_Bleed_Parameters">
<Parameters Type="Default">
<SIMVAR_APU_BLEED_AIR>PNEUMATICS APU BLEED AIR</SIMVAR_APU_BLEED_AIR>
</Parameters>
<Parameters Type="Default">
<GET_APU_BLEED_AIR>(A:#SIMVAR_APU_BLEED_AIR#, Bool)</GET_APU_BLEED_AIR>
</Parameters>
<Parameters Type="Default">
<SET_APU_BLEED_AIR>(>K:APU_BLEED_AIR_SOURCE_SET)</SET_APU_BLEED_AIR>
<TOGGLE_APU_BLEED_AIR>(>K:APU_BLEED_AIR_SOURCE_TOGGLE)</TOGGLE_APU_BLEED_AIR>
</Parameters>
<ReturnParameters>
<SIMVAR_APU_BLEED_AIR>#SIMVAR_APU_BLEED_AIR#</SIMVAR_APU_BLEED_AIR>
<SET_APU_BLEED_AIR>#SET_APU_BLEED_AIR#</SET_APU_BLEED_AIR>
<TOGGLE_APU_BLEED_AIR>#TOGGLE_APU_BLEED_AIR#</TOGGLE_APU_BLEED_AIR>
<GET_APU_BLEED_AIR>#GET_APU_BLEED_AIR#</GET_APU_BLEED_AIR>
</ReturnParameters>
</ParametersFn>
<!-- ############################################################################## -->
<ParametersFn Name="ASOBO_Pneumatics_Engine_Bleed_Parameters">
<Parameters Type="Override">
<UseParametersFn Name="ASOBO_Get_Param_Suffix_Helper"/>
</Parameters>
<Parameters Type="Default">
<ENG_ID>1</ENG_ID>
</Parameters>
<Parameters Type="Default">
<SIMVAR_ENGINE_BLEED_AIR>PNEUMATICS ENGINE BLEED AIR:#ENG_ID#</SIMVAR_ENGINE_BLEED_AIR>
<SIMVAR_ENGINE_BLEED_AIR_TEMPERATURE>PNEUMATICS ENGINE BLEED AIR TEMPERATURE:#ENG_ID#</SIMVAR_ENGINE_BLEED_AIR_TEMPERATURE>
<SIMVAR_ENGINE_BLEED_AIR_PRESSURE>PNEUMATICS ENGINE BLEED AIR PRESSURE:#ENG_ID#</SIMVAR_ENGINE_BLEED_AIR_PRESSURE>
<UNITS_ENGINE_BLEED_AIR_TEMPERATURE>celsius</UNITS_ENGINE_BLEED_AIR_TEMPERATURE>
<UNITS_ENGINE_BLEED_AIR_PRESSURE>psi</UNITS_ENGINE_BLEED_AIR_PRESSURE>
</Parameters>
<Parameters Type="Default">
<GET_ENGINE_BLEED_AIR>(A:#SIMVAR_ENGINE_BLEED_AIR#, Bool)</GET_ENGINE_BLEED_AIR>
<GET_ENGINE_BLEED_AIR_TEMPERATURE>(A:#SIMVAR_ENGINE_BLEED_AIR_TEMPERATURE#, #UNITS_ENGINE_BLEED_AIR_TEMPERATURE#)</GET_ENGINE_BLEED_AIR_TEMPERATURE>
<GET_ENGINE_BLEED_AIR_PRESSURE>(A:#SIMVAR_ENGINE_BLEED_AIR_PRESSURE#, #UNITS_ENGINE_BLEED_AIR_PRESSURE#)</GET_ENGINE_BLEED_AIR_PRESSURE>
</Parameters>
<Parameters Type="Default">
<SET_ENGINE_BLEED_AIR>#ENG_ID# (>K:2:ENGINE_BLEED_AIR_SOURCE_SET)</SET_ENGINE_BLEED_AIR>
<TOGGLE_ENGINE_BLEED_AIR>#ENG_ID# (>K:ENGINE_BLEED_AIR_SOURCE_TOGGLE)</TOGGLE_ENGINE_BLEED_AIR>
</Parameters>
<ReturnParameters>
<SIMVAR_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR>#SIMVAR_ENGINE_BLEED_AIR#</SIMVAR_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR>
<SIMVAR_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR_TEMPERATURE>#SIMVAR_ENGINE_BLEED_AIR_TEMPERATURE#</SIMVAR_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR_TEMPERATURE>
<SIMVAR_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR_PRESSURE>#SIMVAR_ENGINE_BLEED_AIR_PRESSURE#</SIMVAR_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR_PRESSURE>
<GET_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR>#GET_ENGINE_BLEED_AIR#</GET_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR>
<IS_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR_ON>#GET_ENGINE_BLEED_AIR#</IS_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR_ON>
<IS_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR_OFF>#GET_ENGINE_BLEED_AIR# !</IS_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR_OFF>
<GET_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR_TEMPERATURE>#GET_ENGINE_BLEED_AIR_TEMPERATURE#</GET_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR_TEMPERATURE>
<GET_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR_PRESSURE>#GET_ENGINE_BLEED_AIR_PRESSURE#</GET_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR_PRESSURE>
<SET_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR>#SET_ENGINE_BLEED_AIR#</SET_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR>
<TOGGLE_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR>#TOGGLE_ENGINE_BLEED_AIR#</TOGGLE_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR>
</ReturnParameters>
</ParametersFn>
<ParametersFn Name="ASOBO_Pneumatics_Engine_Bleed_Overheat_Parameters">
<Parameters Type="Override">
<UseParametersFn Name="ASOBO_Pneumatics_Engine_Bleed_Parameters"/>
</Parameters>
<Parameters Type="Default">
<OVERHEAT_TEMP>300</OVERHEAT_TEMP>
</Parameters>
<ReturnParameters>
<IS_OVERHEATING>#GET_ENGINE_BLEED_AIR_TEMPERATURE# #OVERHEAT_TEMP# ></IS_OVERHEATING>
</ReturnParameters>
</ParametersFn>
<ParametersFn Name="ASOBO_Pneumatics_Engine_Bleed_Overpressure_Parameters">
<Parameters Type="Override">
<UseParametersFn Name="ASOBO_Pneumatics_Engine_Bleed_Parameters"/>
</Parameters>
<Parameters Type="Default">
<OVERPRESSURE_THRESHOLD>40</OVERPRESSURE_THRESHOLD>
</Parameters>
<ReturnParameters>
<IS_OVER_PRESSURE>#GET_ENGINE_BLEED_AIR_PRESSURE# #OVERPRESSURE_THRESHOLD# ></IS_OVER_PRESSURE>
</ReturnParameters>
</ParametersFn>
<!-- ############################################################################## -->
<Macro Name="Pneumatic_Valve_Mode_Auto">0</Macro>
<Macro Name="Pneumatic_Valve_Mode_Manual">1</Macro>
<Macro Name="Pneumatic_Valve_Mode_Open">2</Macro>
<Macro Name="Pneumatic_Valve_Mode_Closed">3</Macro>
<ParametersFn Name="ASOBO_Pneumatics_Valve_Parameters">
<Parameters Type="Override">
<UseParametersFn Name="ASOBO_Get_Param_Suffix_Helper"/>
</Parameters>
<Parameters Type="Default">
<VALVE_ID>1</VALVE_ID>
</Parameters>
<Parameters Type="Default">
<SIMVAR_VALVE_SWITCH>PNEUMATICS VALVE SWITCH:#VALVE_ID#</SIMVAR_VALVE_SWITCH>
<SIMVAR_VALVE_STATUS>PNEUMATICS VALVE STATUS:#VALVE_ID#</SIMVAR_VALVE_STATUS>
<SIMVAR_VALVE_TARGET_STATUS>PNEUMATICS VALVE TARGET STATUS:#VALVE_ID#</SIMVAR_VALVE_TARGET_STATUS>
<SIMVAR_VALVE_MODE>PNEUMATICS VALVE MODE:#VALVE_ID#</SIMVAR_VALVE_MODE>
<UNITS_VALVE_STATUS>percent</UNITS_VALVE_STATUS>
<UNITS_VALVE_MODE>enum</UNITS_VALVE_MODE>
</Parameters>
<Parameters Type="Default">
<GET_VALVE_SWITCH>(A:#SIMVAR_VALVE_SWITCH#, Bool)</GET_VALVE_SWITCH>
<GET_VALVE_STATUS>(A:#SIMVAR_VALVE_STATUS#, #UNITS_VALVE_STATUS#)</GET_VALVE_STATUS>
<GET_VALVE_TARGET_STATUS>(A:#SIMVAR_VALVE_TARGET_STATUS#, #UNITS_VALVE_STATUS#)</GET_VALVE_TARGET_STATUS>
<GET_VALVE_MODE>(A:#SIMVAR_VALVE_MODE#, #UNITS_VALVE_MODE#)</GET_VALVE_MODE>
</Parameters>
<Parameters Type="Default">
<SET_VALVE>#VALVE_ID# (>K:2:PNEUMATICS_VALVE_SET)</SET_VALVE>
<TOGGLE_VALVE>#VALVE_ID# (>K:PNEUMATICS_VALVE_TOGGLE)</TOGGLE_VALVE>
<SET_VALVE_MODE>d #GET_VALVE_MODE# != if{ #VALVE_ID# (>K:2:PNEUMATICS_VALVE_MODE_SET) }</SET_VALVE_MODE>
</Parameters>
<ReturnParameters>
<SIMVAR_VALVE#OUT_PARAM_SUFFIX#_SWITCH>#SIMVAR_VALVE_SWITCH#</SIMVAR_VALVE#OUT_PARAM_SUFFIX#_SWITCH>
<SIMVAR_VALVE#OUT_PARAM_SUFFIX#_TARGET_STATUS>#SIMVAR_VALVE_TARGET_STATUS#</SIMVAR_VALVE#OUT_PARAM_SUFFIX#_TARGET_STATUS>
<SIMVAR_VALVE#OUT_PARAM_SUFFIX#_STATUS>#SIMVAR_VALVE_STATUS#</SIMVAR_VALVE#OUT_PARAM_SUFFIX#_STATUS>
<SIMVAR_VALVE#OUT_PARAM_SUFFIX#_MODE>#SIMVAR_VALVE_MODE#</SIMVAR_VALVE#OUT_PARAM_SUFFIX#_MODE>
<GET_VALVE#OUT_PARAM_SUFFIX#_SWITCH>#GET_VALVE_SWITCH#</GET_VALVE#OUT_PARAM_SUFFIX#_SWITCH>
<GET_VALVE#OUT_PARAM_SUFFIX#_STATUS>#GET_VALVE_STATUS#</GET_VALVE#OUT_PARAM_SUFFIX#_STATUS>
<GET_VALVE#OUT_PARAM_SUFFIX#_TARGET_STATUS>#GET_VALVE_TARGET_STATUS#</GET_VALVE#OUT_PARAM_SUFFIX#_TARGET_STATUS>
<IS_VALVE#OUT_PARAM_SUFFIX#_OPEN>#GET_VALVE_STATUS# 0 ></IS_VALVE#OUT_PARAM_SUFFIX#_OPEN>
<IS_VALVE#OUT_PARAM_SUFFIX#_CLOSED>#GET_VALVE_STATUS# 0 ==</IS_VALVE#OUT_PARAM_SUFFIX#_CLOSED>
<GET_VALVE#OUT_PARAM_SUFFIX#_MODE>#GET_VALVE_MODE#</GET_VALVE#OUT_PARAM_SUFFIX#_MODE>
<IS_VALVE#OUT_PARAM_SUFFIX#_MODE_AUTO>#GET_VALVE_MODE# @Pneumatic_Valve_Mode_Auto ==</IS_VALVE#OUT_PARAM_SUFFIX#_MODE_AUTO>
<IS_VALVE#OUT_PARAM_SUFFIX#_MODE_MANUAL>#GET_VALVE_MODE# @Pneumatic_Valve_Mode_Manual ==</IS_VALVE#OUT_PARAM_SUFFIX#_MODE_MANUAL>
<IS_VALVE#OUT_PARAM_SUFFIX#_MODE_OPEN>#GET_VALVE_MODE# @Pneumatic_Valve_Mode_Open ==</IS_VALVE#OUT_PARAM_SUFFIX#_MODE_OPEN>
<IS_VALVE#OUT_PARAM_SUFFIX#_MODE_CLOSED>#GET_VALVE_MODE# @Pneumatic_Valve_Mode_Closed ==</IS_VALVE#OUT_PARAM_SUFFIX#_MODE_CLOSED>
<SET_VALVE#OUT_PARAM_SUFFIX#>#SET_VALVE#</SET_VALVE#OUT_PARAM_SUFFIX#>
<SET_VALVE#OUT_PARAM_SUFFIX#_OPEN>100 #SET_VALVE#</SET_VALVE#OUT_PARAM_SUFFIX#_OPEN>
<SET_VALVE#OUT_PARAM_SUFFIX#_CLOSED>0 #SET_VALVE#</SET_VALVE#OUT_PARAM_SUFFIX#_CLOSED>
<TOGGLE_VALVE#OUT_PARAM_SUFFIX#>#TOGGLE_VALVE#</TOGGLE_VALVE#OUT_PARAM_SUFFIX#>
<SET_VALVE#OUT_PARAM_SUFFIX#_MODE>#SET_VALVE_MODE#</SET_VALVE#OUT_PARAM_SUFFIX#_MODE>
<SET_VALVE#OUT_PARAM_SUFFIX#_MODE_AUTO>@Pneumatic_Valve_Mode_Auto #SET_VALVE_MODE#</SET_VALVE#OUT_PARAM_SUFFIX#_MODE_AUTO>
<SET_VALVE#OUT_PARAM_SUFFIX#_MODE_MANUAL>@Pneumatic_Valve_Mode_Manual #SET_VALVE_MODE#</SET_VALVE#OUT_PARAM_SUFFIX#_MODE_MANUAL>
<SET_VALVE#OUT_PARAM_SUFFIX#_MODE_OPEN>@Pneumatic_Valve_Mode_Open #SET_VALVE_MODE#</SET_VALVE#OUT_PARAM_SUFFIX#_MODE_OPEN>
<SET_VALVE#OUT_PARAM_SUFFIX#_MODE_CLOSED>@Pneumatic_Valve_Mode_Closed #SET_VALVE_MODE#</SET_VALVE#OUT_PARAM_SUFFIX#_MODE_CLOSED>
</ReturnParameters>
</ParametersFn>
<!-- ############################################################################## -->
<Macro Name="Pneumatic_Pack_Mode_Low">0</Macro>
<Macro Name="Pneumatic_Pack_Mode_Norm">1</Macro>
<Macro Name="Pneumatic_Pack_Mode_High">2</Macro>
<ParametersFn Name="ASOBO_Pneumatics_Pack_Parameters">
<Parameters Type="Override">
<UseParametersFn Name="ASOBO_Get_Param_Suffix_Helper"/>
</Parameters>
<Parameters Type="Default">
<PACK_ID>1</PACK_ID>
</Parameters>
<Parameters Type="Default">
<SIMVAR_PACK_FLOW>PNEUMATICS PACK FLOW:#PACK_ID#</SIMVAR_PACK_FLOW>
<SIMVAR_PACK_FLOW_AUTO>PNEUMATICS PACK FLOW AUTO:#PACK_ID#</SIMVAR_PACK_FLOW_AUTO>
<SIMVAR_PACK_FLOW_MODE>PNEUMATICS PACK FLOW MODE:#PACK_ID#</SIMVAR_PACK_FLOW_MODE>
<SIMVAR_PACK_FLOW_MODE_VALUE_LOW>PNEUMATICS PACK FLOW MODE VALUE LOW:#PACK_ID#</SIMVAR_PACK_FLOW_MODE_VALUE_LOW>
<SIMVAR_PACK_FLOW_MODE_VALUE_NORM>PNEUMATICS PACK FLOW MODE VALUE NORM:#PACK_ID#</SIMVAR_PACK_FLOW_MODE_VALUE_NORM>
<SIMVAR_PACK_FLOW_MODE_VALUE_HIGH>PNEUMATICS PACK FLOW MODE VALUE HIGH:#PACK_ID#</SIMVAR_PACK_FLOW_MODE_VALUE_HIGH>
<SIMVAR_PACK_STATUS>PNEUMATICS PACK STATUS:#PACK_ID#</SIMVAR_PACK_STATUS>
<SIMVAR_PACK_SWITCH>PNEUMATICS PACK SWITCH:#PACK_ID#</SIMVAR_PACK_SWITCH>
<SIMVAR_PACK_TEMPERATURE>PNEUMATICS PACK TEMPERATURE:#PACK_ID#</SIMVAR_PACK_TEMPERATURE>
<UNITS_PACK_FLOW>percent</UNITS_PACK_FLOW>
<UNITS_PACK_FLOW_MODE>enum</UNITS_PACK_FLOW_MODE>
<UNITS_PACK_FLOW>percent</UNITS_PACK_FLOW>
<UNITS_PACK_FLOW_MODE_VALUE_LOW>percent</UNITS_PACK_FLOW_MODE_VALUE_LOW>
<UNITS_PACK_FLOW_MODE_VALUE_NORM>percent</UNITS_PACK_FLOW_MODE_VALUE_NORM>
<UNITS_PACK_FLOW_MODE_VALUE_HIGH>percent</UNITS_PACK_FLOW_MODE_VALUE_HIGH>
<UNITS_PACK_TEMPERATURE>celsius</UNITS_PACK_TEMPERATURE>
</Parameters>
<Parameters Type="Default">
<GET_PACK_FLOW>(A:#SIMVAR_PACK_FLOW#, #UNITS_PACK_FLOW#)</GET_PACK_FLOW>
<GET_PACK_FLOW_AUTO>(A:#SIMVAR_PACK_FLOW_AUTO#, Bool)</GET_PACK_FLOW_AUTO>
<GET_PACK_FLOW_MODE>(A:#SIMVAR_PACK_FLOW_MODE#, #UNITS_PACK_FLOW_MODE#)</GET_PACK_FLOW_MODE>
<GET_PACK_FLOW_MODE_VALUE_LOW>(A:#SIMVAR_PACK_FLOW_MODE_VALUE_LOW#, #UNITS_PACK_FLOW_MODE_VALUE_LOW#)</GET_PACK_FLOW_MODE_VALUE_LOW>
<GET_PACK_FLOW_MODE_VALUE_NORM>(A:#SIMVAR_PACK_FLOW_MODE_VALUE_NORM#, #UNITS_PACK_FLOW_MODE_VALUE_NORM#)</GET_PACK_FLOW_MODE_VALUE_NORM>
<GET_PACK_FLOW_MODE_VALUE_HIGH>(A:#SIMVAR_PACK_FLOW_MODE_VALUE_HIGH#, #UNITS_PACK_FLOW_MODE_VALUE_HIGH#)</GET_PACK_FLOW_MODE_VALUE_HIGH>
<GET_PACK_STATUS>(A:#SIMVAR_PACK_STATUS#, Bool)</GET_PACK_STATUS>
<GET_PACK_SWITCH>(A:#SIMVAR_PACK_SWITCH#, Bool)</GET_PACK_SWITCH>
<GET_PACK_TEMPERATURE>(A:#SIMVAR_PACK_TEMPERATURE#, #UNITS_PACK_TEMPERATURE#)</GET_PACK_TEMPERATURE>
</Parameters>
<Parameters Type="Default">
<SET_PACK_FLOW>#PACK_ID# (>K:2:PNEUMATICS_PACKS_FLOW_SET)</SET_PACK_FLOW>
<SET_PACK_FLOW_AUTO>#PACK_ID# (>K:2:PNEUMATICS_PACK_FLOW_AUTO_SET)</SET_PACK_FLOW_AUTO>
<SET_PACK_FLOW_MODE>#PACK_ID# (>K:2:PNEUMATICS_PACK_FLOW_MODE_SET)</SET_PACK_FLOW_MODE>
<SET_PACK>#PACK_ID# (>K:2:PNEUMATICS_PACK_SET)</SET_PACK>
<TOGGLE_PACK>#PACK_ID# (>K:PNEUMATICS_PACK_TOGGLE)</TOGGLE_PACK>
</Parameters>
<ReturnParameters>
<SIMVAR_PACK#OUT_PARAM_SUFFIX#_FLOW>#SIMVAR_PACK_FLOW#</SIMVAR_PACK#OUT_PARAM_SUFFIX#_FLOW>
<SIMVAR_PACK#OUT_PARAM_SUFFIX#_FLOW_AUTO>#SIMVAR_PACK_FLOW_AUTO#</SIMVAR_PACK#OUT_PARAM_SUFFIX#_FLOW_AUTO>
<SIMVAR_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE>#SIMVAR_PACK_FLOW_MODE#</SIMVAR_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE>
<SIMVAR_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_VALUE_LOW>#SIMVAR_PACK_FLOW_MODE_VALUE_LOW#</SIMVAR_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_VALUE_LOW>
<SIMVAR_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_VALUE_NORM>#SIMVAR_PACK_FLOW_MODE_VALUE_NORM#</SIMVAR_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_VALUE_NORM>
<SIMVAR_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_VALUE_HIGH>#SIMVAR_PACK_FLOW_MODE_VALUE_HIGH#</SIMVAR_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_VALUE_HIGH>
<SIMVAR_PACK#OUT_PARAM_SUFFIX#_STATUS>#SIMVAR_PACK_STATUS#</SIMVAR_PACK#OUT_PARAM_SUFFIX#_STATUS>
<SIMVAR_PACK#OUT_PARAM_SUFFIX#_SWITCH>#SIMVAR_PACK_SWITCH#</SIMVAR_PACK#OUT_PARAM_SUFFIX#_SWITCH>
<SIMVAR_PACK#OUT_PARAM_SUFFIX#_TEMPERATURE>#SIMVAR_PACK_TEMPERATURE#</SIMVAR_PACK#OUT_PARAM_SUFFIX#_TEMPERATURE>
<GET_PACK#OUT_PARAM_SUFFIX#_FLOW>#GET_PACK_FLOW#</GET_PACK#OUT_PARAM_SUFFIX#_FLOW>
<GET_PACK#OUT_PARAM_SUFFIX#_FLOW_AUTO>#GET_PACK_FLOW_AUTO#</GET_PACK#OUT_PARAM_SUFFIX#_FLOW_AUTO>
<GET_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE>#GET_PACK_FLOW_MODE#</GET_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE>
<GET_PACK#OUT_PARAM_SUFFIX#_FLOW_AUTO_ON>#GET_PACK_FLOW_AUTO# 1 ==</GET_PACK#OUT_PARAM_SUFFIX#_FLOW_AUTO_ON>
<GET_PACK#OUT_PARAM_SUFFIX#_FLOW_AUTO_OFF>#GET_PACK_FLOW_AUTO# 0 ==</GET_PACK#OUT_PARAM_SUFFIX#_FLOW_AUTO_OFF>
<IS_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_LOW>#GET_PACK_FLOW_MODE# @Pneumatic_Pack_Mode_Low ==</IS_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_LOW>
<IS_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_NORM>#GET_PACK_FLOW_MODE# @Pneumatic_Pack_Mode_Norm ==</IS_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_NORM>
<IS_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_HIGH>#GET_PACK_FLOW_MODE# @Pneumatic_Pack_Mode_High ==</IS_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_HIGH>
<GET_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_VALUE_LOW>#GET_PACK_FLOW_MODE_VALUE_LOW#</GET_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_VALUE_LOW>
<GET_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_VALUE_NORM>#GET_PACK_FLOW_MODE_VALUE_NORM#</GET_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_VALUE_NORM>
<GET_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_VALUE_HIGH>#GET_PACK_FLOW_MODE_VALUE_HIGH#</GET_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_VALUE_HIGH>
<GET_PACK#OUT_PARAM_SUFFIX#_STATUS>#GET_PACK_STATUS#</GET_PACK#OUT_PARAM_SUFFIX#_STATUS>
<IS_PACK#OUT_PARAM_SUFFIX#_ON>#GET_PACK_STATUS#</IS_PACK#OUT_PARAM_SUFFIX#_ON>
<IS_PACK#OUT_PARAM_SUFFIX#_OFF>#GET_PACK_STATUS# !</IS_PACK#OUT_PARAM_SUFFIX#_OFF>
<GET_PACK#OUT_PARAM_SUFFIX#_SWITCH>#GET_PACK_SWITCH#</GET_PACK#OUT_PARAM_SUFFIX#_SWITCH>
<GET_PACK#OUT_PARAM_SUFFIX#_TEMPERATURE>#GET_PACK_TEMPERATURE#</GET_PACK#OUT_PARAM_SUFFIX#_TEMPERATURE>
<SET_PACK#OUT_PARAM_SUFFIX#_FLOW>#SET_PACK_FLOW#</SET_PACK#OUT_PARAM_SUFFIX#_FLOW>
<SET_PACK#OUT_PARAM_SUFFIX#_FLOW_AUTO>#SET_PACK_FLOW_AUTO#</SET_PACK#OUT_PARAM_SUFFIX#_FLOW_AUTO>
<SET_PACK#OUT_PARAM_SUFFIX#_FLOW_AUTO_ON>1 #SET_PACK_FLOW_AUTO#</SET_PACK#OUT_PARAM_SUFFIX#_FLOW_AUTO_ON>
<SET_PACK#OUT_PARAM_SUFFIX#_FLOW_AUTO_OFF>0 #SET_PACK_FLOW_AUTO#</SET_PACK#OUT_PARAM_SUFFIX#_FLOW_AUTO_OFF>
<SET_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE>#SET_PACK_FLOW_MODE#</SET_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE>
<SET_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_LOW>@Pneumatic_Pack_Mode_Low #SET_PACK_FLOW_MODE#</SET_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_LOW>
<SET_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_NORM>@Pneumatic_Pack_Mode_Norm #SET_PACK_FLOW_MODE#</SET_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_NORM>
<SET_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_HIGH>@Pneumatic_Pack_Mode_High #SET_PACK_FLOW_MODE#</SET_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_HIGH>
<SET_PACK#OUT_PARAM_SUFFIX#>#SET_PACK#</SET_PACK#OUT_PARAM_SUFFIX#>
<SET_PACK#OUT_PARAM_SUFFIX#_ON>1 #SET_PACK#</SET_PACK#OUT_PARAM_SUFFIX#_ON>
<SET_PACK#OUT_PARAM_SUFFIX#_OFF>0 #SET_PACK#</SET_PACK#OUT_PARAM_SUFFIX#_OFF>
<TOGGLE_PACK#OUT_PARAM_SUFFIX#>#TOGGLE_PACK#</TOGGLE_PACK#OUT_PARAM_SUFFIX#>
</ReturnParameters>
</ParametersFn>
<ParametersFn Name="ASOBO_Pneumatics_Pack_Overheat_Parameters">
<Parameters Type="Override">
<UseParametersFn Name="ASOBO_Pneumatics_Pack_Parameters"/>
</Parameters>
<Parameters Type="Default">
<OVERHEAT_TEMP>40</OVERHEAT_TEMP>
</Parameters>
<ReturnParameters>
<IS_OVERHEATING>#GET_PACK_TEMPERATURE# #OVERHEAT_TEMP# ></IS_OVERHEATING>
</ReturnParameters>
</ParametersFn>
<ParametersFn Name="ASOBO_Pneumatics_Pack_Overheat_Emissive_Parameters">
<Parameters Type="Override">
<UseParametersFn Name="ASOBO_Pneumatics_Pack_Overheat_Parameters"/>
</Parameters>
<ReturnParameters>
<EMISSIVE_CODE>#IS_OVERHEATING#</EMISSIVE_CODE>
</ReturnParameters>
</ParametersFn>
<!-- ############################################################################## -->
<ParametersFn Name="ASOBO_Pneumatics_Area_Parameters">
<Parameters Type="Override">
<UseParametersFn Name="ASOBO_Get_Param_Suffix_Helper"/>
</Parameters>
<Parameters Type="Default">
<AREA_ID>1</AREA_ID>
</Parameters>
<Parameters Type="Default">
<SIMVAR_AREA_TEMPERATURE>PNEUMATICS AREA TEMPERATURE:#AREA_ID#</SIMVAR_AREA_TEMPERATURE>
<SIMVAR_AREA_TARGET_TEMPERATURE>PNEUMATICS AREA TARGET TEMPERATURE:#AREA_ID#</SIMVAR_AREA_TARGET_TEMPERATURE>
<SIMVAR_AREA_TARGET_TEMPERATURE_PCT>PNEUMATICS AREA TARGET TEMPERATURE PCT:#AREA_ID#</SIMVAR_AREA_TARGET_TEMPERATURE_PCT>
<UNITS_AREA_TEMPERATURE>celsius</UNITS_AREA_TEMPERATURE>
<UNITS_AREA_TARGET_TEMPERATURE>celsius</UNITS_AREA_TARGET_TEMPERATURE>
<UNITS_AREA_TARGET_TEMPERATURE_PCT>percent</UNITS_AREA_TARGET_TEMPERATURE_PCT>
</Parameters>
<Parameters Type="Default">
<GET_AREA_TEMPERATURE>(A:#SIMVAR_AREA_TEMPERATURE#, #UNITS_AREA_TEMPERATURE#)</GET_AREA_TEMPERATURE>
<GET_AREA_TARGET_TEMPERATURE>(A:#SIMVAR_AREA_TARGET_TEMPERATURE#, #UNITS_AREA_TARGET_TEMPERATURE#)</GET_AREA_TARGET_TEMPERATURE>
<GET_AREA_TARGET_TEMPERATURE_PCT>(A:#SIMVAR_AREA_TARGET_TEMPERATURE_PCT#, #UNITS_AREA_TARGET_TEMPERATURE_PCT#)</GET_AREA_TARGET_TEMPERATURE_PCT>
</Parameters>
<Parameters Type="Default">
<SET_AREA_TARGET_TEMPERATURE>#AREA_ID# (>K:2:PNEUMATICS_AREA_TEMPERATURE_SET)</SET_AREA_TARGET_TEMPERATURE>
<SET_AREA_TARGET_TEMPERATURE_PCT>(>A:1:#SIMVAR_AREA_TARGET_TEMPERATURE_PCT#, #UNITS_AREA_TARGET_TEMPERATURE_PCT#)</SET_AREA_TARGET_TEMPERATURE_PCT>
</Parameters>
<ReturnParameters>
<SIMVAR_AREA#OUT_PARAM_SUFFIX#_TEMPERATURE>#SIMVAR_AREA_TEMPERATURE#</SIMVAR_AREA#OUT_PARAM_SUFFIX#_TEMPERATURE>
<SIMVAR_AREA#OUT_PARAM_SUFFIX#_TARGET_TEMPERATURE>#SIMVAR_AREA_TARGET_TEMPERATURE#</SIMVAR_AREA#OUT_PARAM_SUFFIX#_TARGET_TEMPERATURE>
<SIMVAR_AREA#OUT_PARAM_SUFFIX#_TARGET_TEMPERATURE_PCT>#SIMVAR_AREA_TARGET_TEMPERATURE_PCT#</SIMVAR_AREA#OUT_PARAM_SUFFIX#_TARGET_TEMPERATURE_PCT>
<GET_AREA#OUT_PARAM_SUFFIX#_TEMPERATURE>#GET_AREA_TEMPERATURE#</GET_AREA#OUT_PARAM_SUFFIX#_TEMPERATURE>
<GET_AREA#OUT_PARAM_SUFFIX#_TARGET_TEMPERATURE>#GET_AREA_TARGET_TEMPERATURE#</GET_AREA#OUT_PARAM_SUFFIX#_TARGET_TEMPERATURE>
<GET_AREA#OUT_PARAM_SUFFIX#_TARGET_TEMPERATURE_PCT>#GET_AREA_TARGET_TEMPERATURE_PCT#</GET_AREA#OUT_PARAM_SUFFIX#_TARGET_TEMPERATURE_PCT>
<SET_AREA#OUT_PARAM_SUFFIX#_TARGET_TEMPERATURE>#SET_AREA_TARGET_TEMPERATURE#</SET_AREA#OUT_PARAM_SUFFIX#_TARGET_TEMPERATURE>
<SET_AREA#OUT_PARAM_SUFFIX#_TARGET_TEMPERATURE_PCT>#SET_AREA_TARGET_TEMPERATURE_PCT#</SET_AREA#OUT_PARAM_SUFFIX#_TARGET_TEMPERATURE>
</ReturnParameters>
</ParametersFn>
<!-- ############################################################################## -->
<ParametersFn Name="ASOBO_Pneumatics_Alternate_Static_Source_Parameters">
<Parameters Type="Default">
<SIMVAR_ALTERNATE_STATIC_SOURCE_STATE>ALTERNATE STATIC SOURCE OPEN</SIMVAR_ALTERNATE_STATIC_SOURCE_STAT>
</Parameters>
<Parameters Type="Default">
<GET_ALTERNATE_STATIC_SOURCE_STATE>(A:#SIMVAR_ALTERNATE_STATIC_SOURCE_STATE#, Bool)</GET_ALTERNATE_STATIC_SOURCE_STATE>
<TOGGLE_ALTERNATE_STATIC_SOURCE_STATE>(>K:TOGGLE_ALTERNATE_STATIC)</TOGGLE_ALTERNATE_STATIC_SOURCE_STATE>
</Parameters>
<Parameters Type="Default">
<SET_ALTERNATE_STATIC_SOURCE_STATE>#GET_ALTERNATE_STATIC_SOURCE_STATE# != if{ #TOGGLE_ALTERNATE_STATIC_SOURCE_STATE# }</SET_ALTERNATE_STATIC_SOURCE_STATE>
</Parameters>
<ReturnParameters>
<SIMVAR_ALTERNATE_STATIC_SOURCE_STATE>#SIMVAR_ALTERNATE_STATIC_SOURCE_STATE#</SIMVAR_ALTERNATE_STATIC_SOURCE_STATE>
<GET_ALTERNATE_STATIC_SOURCE_STATE>#GET_ALTERNATE_STATIC_SOURCE_STATE#</GET_ALTERNATE_STATIC_SOURCE_STAT>
<TOGGLE_ALTERNATE_STATIC_SOURCE_STATE>#TOGGLE_ALTERNATE_STATIC_SOURCE_STATE#</TOGGLE_ALTERNATE_STATIC_SOURCE_STATE>
<SET_ALTERNATE_STATIC_SOURCE_STATE>#SET_ALTERNATE_STATIC_SOURCE_STATE#</SET_ALTERNATE_STATIC_SOURCE_STATE>
<SET_ALTERNATE_STATIC_SOURCE_OPEN>1 #SET_ALTERNATE_STATIC_SOURCE_STATE#</SET_ALTERNATE_STATIC_SOURCE_OPEN>
<SET_ALTERNATE_STATIC_SOURCE_CLOSED>0 #SET_ALTERNATE_STATIC_SOURCE_STATE#</SET_ALTERNATE_STATIC_SOURCE_CLOSED>
</ReturnParameters>
</ParametersFn>
<!-- ############################################################################## -->
</ModelBehaviors>
Includes
- RelativeFile: InteractionPresets\\Pneumatics_Interactions.xml
ParametersFn
ASOBO_APU_Bleed_Parameters
Definition from XML<ParametersFn Name="ASOBO_APU_Bleed_Parameters"> <Parameters Type="Default"> <SIMVAR_APU_BLEED_AIR>BLEED AIR APU</SIMVAR_APU_BLEED_AIR> </Parameters> <Parameters Type="Default"> <GET_APU_BLEED_AIR>(A:#SIMVAR_APU_BLEED_AIR#, Bool)</GET_APU_BLEED_AIR> </Parameters> <Parameters Type="Default"> <SET_APU_BLEED_AIR>(>K:APU_BLEED_AIR_SOURCE_SET)</SET_APU_BLEED_AIR> <TOGGLE_APU_BLEED_AIR>(>K:APU_BLEED_AIR_SOURCE_TOGGLE)</TOGGLE_APU_BLEED_AIR> </Parameters> <ReturnParameters> <SIMVAR_APU_BLEED_AIR>#SIMVAR_APU_BLEED_AIR#</SIMVAR_APU_BLEED_AIR> <SET_APU_BLEED_AIR>#SET_APU_BLEED_AIR#</SET_APU_BLEED_AIR> <TOGGLE_APU_BLEED_AIR>#TOGGLE_APU_BLEED_AIR#</TOGGLE_APU_BLEED_AIR> <GET_APU_BLEED_AIR>#GET_APU_BLEED_AIR#</GET_APU_BLEED_AIR> </ReturnParameters> </ParametersFn>Parameters initialization:
- Default
Parameters set:
- SIMVAR_APU_BLEED_AIR
- Default
Parameters set:
- GET_APU_BLEED_AIR (using SIMVAR_APU_BLEED_AIR)
- Default
Parameters set:
- SET_APU_BLEED_AIR
- TOGGLE_APU_BLEED_AIR
Return parameters:
Parameters set:
- SIMVAR_APU_BLEED_AIR (using SIMVAR_APU_BLEED_AIR)
- SET_APU_BLEED_AIR (using SET_APU_BLEED_AIR)
- TOGGLE_APU_BLEED_AIR (using TOGGLE_APU_BLEED_AIR)
- GET_APU_BLEED_AIR (using GET_APU_BLEED_AIR)
- Default
ASOBO_Engine_Bleed_Parameters
Definition from XML<ParametersFn Name="ASOBO_Engine_Bleed_Parameters"> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Get_Param_Suffix_Helper"/> </Parameters> <Parameters Type="Default"> <ENG_ID>1</ENG_ID> </Parameters> <Parameters Type="Default"> <SIMVAR_ENGINE_BLEED_AIR>BLEED AIR ENGINE:#ENG_ID#</SIMVAR_ENGINE_BLEED_AIR> <SIMVAR_ENGINE_BLEED_AIR_TURBINE>TURB ENG BLEED AIR:#ENG_ID#</SIMVAR_ENGINE_BLEED_AIR_TURBINE> <UNITS_ENGINE_BLEED_AIR_TURBINE>psi</UNITS_ENGINE_BLEED_AIR_TURBINE> </Parameters> <Parameters Type="Default"> <GET_ENGINE_BLEED_AIR>(A:#SIMVAR_ENGINE_BLEED_AIR#, Bool)</GET_ENGINE_BLEED_AIR> <GET_ENGINE_BLEED_AIR_TURBINE>(A:#SIMVAR_ENGINE_BLEED_AIR_TURBINE#, #UNITS_ENGINE_BLEED_AIR_TURBINE#)</GET_ENGINE_BLEED_AIR_TURBINE> </Parameters> <Parameters Type="Default"> <SET_ENGINE_BLEED_AIR>#ENG_ID# (>K:2:ENGINE_BLEED_AIR_SOURCE_SET)</SET_ENGINE_BLEED_AIR> <TOGGLE_ENGINE_BLEED_AIR>#ENG_ID# (>K:ENGINE_BLEED_AIR_SOURCE_TOGGLE)</TOGGLE_ENGINE_BLEED_AIR> </Parameters> <ReturnParameters> <SIMVAR_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR>#SIMVAR_ENGINE_BLEED_AIR#</SIMVAR_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR> <SIMVAR_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR_TURBINE>#SIMVAR_ENGINE_BLEED_AIR#</SIMVAR_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR_TURBINE> <GET_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR>#GET_ENGINE_BLEED_AIR#</GET_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR> <GET_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR_TURBINE>#GET_ENGINE_BLEED_AIR_TURBINE#</GET_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR_TURBINE> <SET_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR>#SET_ENGINE_BLEED_AIR#</SET_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR> <TOGGLE_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR>#TOGGLE_ENGINE_BLEED_AIR#</TOGGLE_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR> </ReturnParameters> </ParametersFn>Parameters initialization:
- Override
ParametersFn used:
- Default
Parameters set:
- ENG_ID
- Default
Parameters set:
- SIMVAR_ENGINE_BLEED_AIR (using ENG_ID)
- SIMVAR_ENGINE_BLEED_AIR_TURBINE (using ENG_ID)
- UNITS_ENGINE_BLEED_AIR_TURBINE
- Default
Parameters set:
- GET_ENGINE_BLEED_AIR (using SIMVAR_ENGINE_BLEED_AIR)
- GET_ENGINE_BLEED_AIR_TURBINE (using SIMVAR_ENGINE_BLEED_AIR_TURBINE, UNITS_ENGINE_BLEED_AIR_TURBINE)
- Default
Parameters set:
- SET_ENGINE_BLEED_AIR (using ENG_ID)
- TOGGLE_ENGINE_BLEED_AIR (using ENG_ID)
Return parameters:
Parameters set:
- SIMVAR_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR (using SIMVAR_ENGINE_BLEED_AIR)
- SIMVAR_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR_TURBINE (using SIMVAR_ENGINE_BLEED_AIR)
- GET_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR (using GET_ENGINE_BLEED_AIR)
- GET_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR_TURBINE (using GET_ENGINE_BLEED_AIR_TURBINE)
- SET_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR (using SET_ENGINE_BLEED_AIR)
- TOGGLE_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR (using TOGGLE_ENGINE_BLEED_AIR)
- Override
ASOBO_Pressurization_Parameters
Definition from XML<ParametersFn Name="ASOBO_Pressurization_Parameters"> <Parameters Type="Default"> <SIMVAR_DUMP_SWITCH>PRESSURIZATION DUMP SWITCH</SIMVAR_DUMP_SWITCH> <SIMVAR_CABIN_ALTITUDE>PRESSURIZATION CABIN ALTITUDE</SIMVAR_CABIN_ALTITUDE> <SIMVAR_CABIN_ALTITUDE_GOAL>PRESSURIZATION CABIN ALTITUDE GOAL</SIMVAR_CABIN_ALTITUDE_GOAL> <SIMVAR_CABIN_ALTITUDE_RATE>PRESSURIZATION CABIN ALTITUDE RATE</SIMVAR_CABIN_ALTITUDE_RATE> <SIMVAR_PRESSURE_DIFFERENTIAL>PRESSURIZATION PRESSURE DIFFERENTIAL</SIMVAR_PRESSURE_DIFFERENTIAL> <UNITS_CABIN_ALTITUDE>feet</UNITS_CABIN_ALTITUDE> <UNITS_CABIN_ALTITUDE_GOAL>feet</UNITS_CABIN_ALTITUDE_GOAL> <UNITS_CABIN_ALTITUDE_RATE>feet per second</UNITS_CABIN_ALTITUDE_RATE> <UNITS_PRESSURE_DIFFERENTIAL>psf</UNITS_PRESSURE_DIFFERENTIAL> </Parameters> <Parameters Type="Default"> <GET_DUMP_SWITCH>(A:#SIMVAR_DUMP_SWITCH#, Bool)</GET_DUMP_SWITCH> <GET_CABIN_ALTITUDE>(A:#SIMVAR_CABIN_ALTITUDE#, #UNITS_CABIN_ALTITUDE#)</GET_CABIN_ALTITUDE> <GET_CABIN_ALTITUDE_GOAL>(A:#SIMVAR_CABIN_ALTITUDE_GOAL#, #UNITS_CABIN_ALTITUDE_GOAL#)</GET_CABIN_ALTITUDE_GOAL> <GET_CABIN_ALTITUDE_RATE>(A:#SIMVAR_CABIN_ALTITUDE_RATE#, #UNITS_CABIN_ALTITUDE_RATE#)</GET_CABIN_ALTITUDE_RATE> <GET_PRESSURE_DIFFERENTIAL>(A:#SIMVAR_PRESSURE_DIFFERENTIAL#, #UNITS_PRESSURE_DIFFERENTIAL#)</GET_PRESSURE_DIFFERENTIAL> </Parameters> <Parameters Type="Default"> <TOGGLE_DUMP_SWITCH>(>K:PRESSURIZATION_PRESSURE_DUMP_SWITCH)</TOGGLE_DUMP_SWITCH> <SET_DUMP_SWITCH>#GET_DUMP_SWITCH# != if{ (>K:PRESSURIZATION_PRESSURE_DUMP_SWITCH) }</SET_DUMP_SWITCH> <INC_CABIN_ALTITUDE_GOAL>(>K:PRESSURIZATION_PRESSURE_ALT_INC)</INC_CABIN_ALTITUDE_GOAL> <DEC_CABIN_ALTITUDE_GOAL>(>K:PRESSURIZATION_PRESSURE_ALT_DEC)</DEC_CABIN_ALTITUDE_GOAL> <INC_CABIN_ALTITUDE_RATE>(>K:PRESSURIZATION_CLIMB_RATE_INC)</INC_CABIN_ALTITUDE_RATE> <DEC_CABIN_ALTITUDE_RATE>(>K:PRESSURIZATION_CLIMB_RATE_DEC)</DEC_CABIN_ALTITUDE_RATE> </Parameters> <ReturnParameters> <SIMVAR_DUMP_SWITCH>#SIMVAR_DUMP_SWITCH#</SIMVAR_DUMP_SWITCH> <SIMVAR_CABIN_ALTITUDE>#SIMVAR_CABIN_ALTITUDE#</SIMVAR_CABIN_ALTITUDE> <SIMVAR_CABIN_ALTITUDE_GOAL>#SIMVAR_CABIN_ALTITUDE_GOAL#</SIMVAR_CABIN_ALTITUDE_GOAL> <SIMVAR_CABIN_ALTITUDE_RATE>#SIMVAR_CABIN_ALTITUDE_RATE#</SIMVAR_CABIN_ALTITUDE_RATE> <SIMVAR_PRESSURE_DIFFERENTIAL>#SIMVAR_PRESSURE_DIFFERENTIAL#</SIMVAR_PRESSURE_DIFFERENTIAL> <TOGGLE_DUMP_SWITCH>#TOGGLE_DUMP_SWITCH#</TOGGLE_DUMP_SWITCH> <SET_DUMP_SWITCH>#SET_DUMP_SWITCH#</SET_DUMP_SWITCH> <INC_CABIN_ALTITUDE_GOAL>#INC_CABIN_ALTITUDE_GOAL#</INC_CABIN_ALTITUDE_GOAL> <DEC_CABIN_ALTITUDE_GOAL>#DEC_CABIN_ALTITUDE_GOAL#</DEC_CABIN_ALTITUDE_GOAL> <INC_CABIN_ALTITUDE_RATE>#INC_CABIN_ALTITUDE_RATE#</INC_CABIN_ALTITUDE_RATE> <DEC_CABIN_ALTITUDE_RATE>#DEC_CABIN_ALTITUDE_RATE#</DEC_CABIN_ALTITUDE_RATE> <GET_DUMP_SWITCH>#GET_DUMP_SWITCH#</GET_DUMP_SWITCH> <GET_CABIN_ALTITUDE>#GET_CABIN_ALTITUDE#</GET_CABIN_ALTITUDE> <GET_CABIN_ALTITUDE_GOAL>#GET_CABIN_ALTITUDE_GOAL#</GET_CABIN_ALTITUDE_GOAL> <GET_CABIN_ALTITUDE_RATE>#GET_CABIN_ALTITUDE_RATE#</GET_CABIN_ALTITUDE_RATE> <GET_PRESSURE_DIFFERENTIAL>#GET_PRESSURE_DIFFERENTIAL#</GET_PRESSURE_DIFFERENTIAL> </ReturnParameters> </ParametersFn>Parameters initialization:
- Default
Parameters set:
- SIMVAR_DUMP_SWITCH
- SIMVAR_CABIN_ALTITUDE
- SIMVAR_CABIN_ALTITUDE_GOAL
- SIMVAR_CABIN_ALTITUDE_RATE
- SIMVAR_PRESSURE_DIFFERENTIAL
- UNITS_CABIN_ALTITUDE
- UNITS_CABIN_ALTITUDE_GOAL
- UNITS_CABIN_ALTITUDE_RATE
- UNITS_PRESSURE_DIFFERENTIAL
- Default
Parameters set:
- GET_DUMP_SWITCH (using SIMVAR_DUMP_SWITCH)
- GET_CABIN_ALTITUDE (using SIMVAR_CABIN_ALTITUDE, UNITS_CABIN_ALTITUDE)
- GET_CABIN_ALTITUDE_GOAL (using SIMVAR_CABIN_ALTITUDE_GOAL, UNITS_CABIN_ALTITUDE_GOAL)
- GET_CABIN_ALTITUDE_RATE (using SIMVAR_CABIN_ALTITUDE_RATE, UNITS_CABIN_ALTITUDE_RATE)
- GET_PRESSURE_DIFFERENTIAL (using SIMVAR_PRESSURE_DIFFERENTIAL, UNITS_PRESSURE_DIFFERENTIAL)
- Default
Parameters set:
- TOGGLE_DUMP_SWITCH
- SET_DUMP_SWITCH (using GET_DUMP_SWITCH)
- INC_CABIN_ALTITUDE_GOAL
- DEC_CABIN_ALTITUDE_GOAL
- INC_CABIN_ALTITUDE_RATE
- DEC_CABIN_ALTITUDE_RATE
Return parameters:
Parameters set:
- SIMVAR_DUMP_SWITCH (using SIMVAR_DUMP_SWITCH)
- SIMVAR_CABIN_ALTITUDE (using SIMVAR_CABIN_ALTITUDE)
- SIMVAR_CABIN_ALTITUDE_GOAL (using SIMVAR_CABIN_ALTITUDE_GOAL)
- SIMVAR_CABIN_ALTITUDE_RATE (using SIMVAR_CABIN_ALTITUDE_RATE)
- SIMVAR_PRESSURE_DIFFERENTIAL (using SIMVAR_PRESSURE_DIFFERENTIAL)
- TOGGLE_DUMP_SWITCH (using TOGGLE_DUMP_SWITCH)
- SET_DUMP_SWITCH (using SET_DUMP_SWITCH)
- INC_CABIN_ALTITUDE_GOAL (using INC_CABIN_ALTITUDE_GOAL)
- DEC_CABIN_ALTITUDE_GOAL (using DEC_CABIN_ALTITUDE_GOAL)
- INC_CABIN_ALTITUDE_RATE (using INC_CABIN_ALTITUDE_RATE)
- DEC_CABIN_ALTITUDE_RATE (using DEC_CABIN_ALTITUDE_RATE)
- GET_DUMP_SWITCH (using GET_DUMP_SWITCH)
- GET_CABIN_ALTITUDE (using GET_CABIN_ALTITUDE)
- GET_CABIN_ALTITUDE_GOAL (using GET_CABIN_ALTITUDE_GOAL)
- GET_CABIN_ALTITUDE_RATE (using GET_CABIN_ALTITUDE_RATE)
- GET_PRESSURE_DIFFERENTIAL (using GET_PRESSURE_DIFFERENTIAL)
- Default
ASOBO_Pneumatics_Sim_Parameters
Definition from XML<ParametersFn Name="ASOBO_Pneumatics_Sim_Parameters"> <Parameters Type="Default"> <SIMVAR_AIRCRAFT_PRESSURE>PNEUMATICS AIRCRAFT PRESSURE</SIMVAR_AIRCRAFT_PRESSURE> <SIMVAR_AREAS_MAX_TEMPERATURE>PNEUMATICS AREAS MAX TEMPERATURE</SIMVAR_AREAS_MAX_TEMPERATURE> <SIMVAR_AREAS_MIN_TEMPERATURE>PNEUMATICS AREAS MIN TEMPERATURE</SIMVAR_AREAS_MIN_TEMPERATURE> <SIMVAR_CABIN_ALTITUDE>PNEUMATICS CABIN ALTITUDE</SIMVAR_CABIN_ALTITUDE> <SIMVAR_CABIN_ALTITUDE_RATE>PNEUMATICS CABIN ALTITUDE RATE</SIMVAR_CABIN_ALTITUDE_RATE> <SIMVAR_DIFFERENTIAL_PRESSURE>PNEUMATICS DIFFERENTIAL PRESSURE</SIMVAR_DIFFERENTIAL_PRESSURE> <SIMVAR_TARGET_CABIN_ALTITUDE>PNEUMATICS TARGET CABIN ALTITUDE</SIMVAR_TARGET_CABIN_ALTITUDE> <UNITS_AIRCRAFT_PRESSURE>kilopascal</UNITS_AIRCRAFT_PRESSURE> <UNITS_AREAS_MAX_TEMPERATURE>celsius</UNITS_AREAS_MAX_TEMPERATURE> <UNITS_AREAS_MIN_TEMPERATURE>celsius</UNITS_AREAS_MIN_TEMPERATURE> <UNITS_CABIN_ALTITUDE>Feet</UNITS_CABIN_ALTITUDE> <UNITS_CABIN_ALTITUDE_RATE>Feet per second</UNITS_CABIN_ALTITUDE_RATE> <UNITS_DIFFERENTIAL_PRESSURE>psi</UNITS_DIFFERENTIAL_PRESSURE> <UNITS_TARGET_CABIN_ALTITUDE>Feet</UNITS_TARGET_CABIN_ALTITUDE> </Parameters> <Parameters Type="Default"> <GET_AIRCRAFT_PRESSURE>(A:#SIMVAR_AIRCRAFT_PRESSURE#, #UNITS_AIRCRAFT_PRESSURE#)</GET_AIRCRAFT_PRESSURE> <GET_AREAS_MAX_TEMPERATURE>(A:#SIMVAR_AREAS_MAX_TEMPERATURE#, #UNITS_AREAS_MAX_TEMPERATURE#)</GET_AREAS_MAX_TEMPERATURE> <GET_AREAS_MIN_TEMPERATURE>(A:#SIMVAR_AREAS_MIN_TEMPERATURE#, #UNITS_AREAS_MIN_TEMPERATURE#)</GET_AREAS_MIN_TEMPERATURE> <GET_CABIN_ALTITUDE>(A:#SIMVAR_CABIN_ALTITUDE#, #UNITS_CABIN_ALTITUDE#)</GET_CABIN_ALTITUDE> <GET_CABIN_ALTITUDE_RATE>(A:#SIMVAR_CABIN_ALTITUDE_RATE#, #UNITS_CABIN_ALTITUDE_RATE#)</GET_CABIN_ALTITUDE_RATE> <GET_DIFFERENTIAL_PRESSURE>(A:#SIMVAR_DIFFERENTIAL_PRESSURE#, #UNITS_DIFFERENTIAL_PRESSURE#)</GET_DIFFERENTIAL_PRESSURE> <GET_TARGET_CABIN_ALTITUDE>(A:#SIMVAR_TARGET_CABIN_ALTITUDE#, #UNITS_TARGET_CABIN_ALTITUDE#)</GET_TARGET_CABIN_ALTITUDE> </Parameters> <Parameters Type="Default"> <SET_TARGET_CABIN_ALTITUDE>(>K:PNEUMATICS_TARGET_CABIN_ALTITUDE_SET)</SET_TARGET_CABIN_ALTITUDE> </Parameters> <ReturnParameters> <SIMVAR_AIRCRAFT_PRESSURE>#SIMVAR_AIRCRAFT_PRESSURE#</SIMVAR_AIRCRAFT_PRESSURE> <SIMVAR_AREAS_MAX_TEMPERATURE>#SIMVAR_AREAS_MAX_TEMPERATURE#</SIMVAR_AREAS_MAX_TEMPERATURE> <SIMVAR_AREAS_MIN_TEMPERATURE>#SIMVAR_AREAS_MIN_TEMPERATURE#</SIMVAR_AREAS_MIN_TEMPERATURE> <SIMVAR_CABIN_ALTITUDE>#SIMVAR_CABIN_ALTITUDE#</SIMVAR_CABIN_ALTITUDE> <SIMVAR_CABIN_ALTITUDE_RATE>#SIMVAR_CABIN_ALTITUDE_RATE#</SIMVAR_CABIN_ALTITUDE_RATE> <SIMVAR_DIFFERENTIAL_PRESSURE>#SIMVAR_DIFFERENTIAL_PRESSURE#</SIMVAR_DIFFERENTIAL_PRESSURE> <SIMVAR_TARGET_CABIN_ALTITUDE>#SIMVAR_TARGET_CABIN_ALTITUDE#</SIMVAR_TARGET_CABIN_ALTITUDE> <GET_AIRCRAFT_PRESSURE>#GET_AIRCRAFT_PRESSURE#</GET_AIRCRAFT_PRESSURE> <GET_AREAS_MAX_TEMPERATURE>#GET_AREAS_MAX_TEMPERATURE#</GET_AREAS_MAX_TEMPERATURE> <GET_AREAS_MIN_TEMPERATURE>#GET_AREAS_MIN_TEMPERATURE#</GET_AREAS_MIN_TEMPERATURE> <GET_CABIN_ALTITUDE>#GET_CABIN_ALTITUDE#</GET_CABIN_ALTITUDE> <GET_CABIN_ALTITUDE_RATE>#GET_CABIN_ALTITUDE_RATE#</GET_CABIN_ALTITUDE_RATE> <GET_DIFFERENTIAL_PRESSURE>#GET_DIFFERENTIAL_PRESSURE#</GET_DIFFERENTIAL_PRESSURE> <GET_TARGET_CABIN_ALTITUDE>#GET_TARGET_CABIN_ALTITUDE#</GET_TARGET_CABIN_ALTITUDE> <SET_TARGET_CABIN_ALTITUDE>#SET_TARGET_CABIN_ALTITUDE#</SET_TARGET_CABIN_ALTITUDE> </ReturnParameters> </ParametersFn>Parameters initialization:
- Default
Parameters set:
- SIMVAR_AIRCRAFT_PRESSURE
- SIMVAR_AREAS_MAX_TEMPERATURE
- SIMVAR_AREAS_MIN_TEMPERATURE
- SIMVAR_CABIN_ALTITUDE
- SIMVAR_CABIN_ALTITUDE_RATE
- SIMVAR_DIFFERENTIAL_PRESSURE
- SIMVAR_TARGET_CABIN_ALTITUDE
- UNITS_AIRCRAFT_PRESSURE
- UNITS_AREAS_MAX_TEMPERATURE
- UNITS_AREAS_MIN_TEMPERATURE
- UNITS_CABIN_ALTITUDE
- UNITS_CABIN_ALTITUDE_RATE
- UNITS_DIFFERENTIAL_PRESSURE
- UNITS_TARGET_CABIN_ALTITUDE
- Default
Parameters set:
- GET_AIRCRAFT_PRESSURE (using SIMVAR_AIRCRAFT_PRESSURE, UNITS_AIRCRAFT_PRESSURE)
- GET_AREAS_MAX_TEMPERATURE (using SIMVAR_AREAS_MAX_TEMPERATURE, UNITS_AREAS_MAX_TEMPERATURE)
- GET_AREAS_MIN_TEMPERATURE (using SIMVAR_AREAS_MIN_TEMPERATURE, UNITS_AREAS_MIN_TEMPERATURE)
- GET_CABIN_ALTITUDE (using SIMVAR_CABIN_ALTITUDE, UNITS_CABIN_ALTITUDE)
- GET_CABIN_ALTITUDE_RATE (using SIMVAR_CABIN_ALTITUDE_RATE, UNITS_CABIN_ALTITUDE_RATE)
- GET_DIFFERENTIAL_PRESSURE (using SIMVAR_DIFFERENTIAL_PRESSURE, UNITS_DIFFERENTIAL_PRESSURE)
- GET_TARGET_CABIN_ALTITUDE (using SIMVAR_TARGET_CABIN_ALTITUDE, UNITS_TARGET_CABIN_ALTITUDE)
- Default
Parameters set:
- SET_TARGET_CABIN_ALTITUDE
Return parameters:
Parameters set:
- SIMVAR_AIRCRAFT_PRESSURE (using SIMVAR_AIRCRAFT_PRESSURE)
- SIMVAR_AREAS_MAX_TEMPERATURE (using SIMVAR_AREAS_MAX_TEMPERATURE)
- SIMVAR_AREAS_MIN_TEMPERATURE (using SIMVAR_AREAS_MIN_TEMPERATURE)
- SIMVAR_CABIN_ALTITUDE (using SIMVAR_CABIN_ALTITUDE)
- SIMVAR_CABIN_ALTITUDE_RATE (using SIMVAR_CABIN_ALTITUDE_RATE)
- SIMVAR_DIFFERENTIAL_PRESSURE (using SIMVAR_DIFFERENTIAL_PRESSURE)
- SIMVAR_TARGET_CABIN_ALTITUDE (using SIMVAR_TARGET_CABIN_ALTITUDE)
- GET_AIRCRAFT_PRESSURE (using GET_AIRCRAFT_PRESSURE)
- GET_AREAS_MAX_TEMPERATURE (using GET_AREAS_MAX_TEMPERATURE)
- GET_AREAS_MIN_TEMPERATURE (using GET_AREAS_MIN_TEMPERATURE)
- GET_CABIN_ALTITUDE (using GET_CABIN_ALTITUDE)
- GET_CABIN_ALTITUDE_RATE (using GET_CABIN_ALTITUDE_RATE)
- GET_DIFFERENTIAL_PRESSURE (using GET_DIFFERENTIAL_PRESSURE)
- GET_TARGET_CABIN_ALTITUDE (using GET_TARGET_CABIN_ALTITUDE)
- SET_TARGET_CABIN_ALTITUDE (using SET_TARGET_CABIN_ALTITUDE)
- Default
ASOBO_Pneumatics_Duct_Parameters
Definition from XML<ParametersFn Name="ASOBO_Pneumatics_Duct_Parameters"> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Get_Param_Suffix_Helper"/> </Parameters> <Parameters Type="Default"> <PACK_ID>1</PACK_ID> <AREA_ID>1</AREA_ID> </Parameters> <Parameters Type="Default"> <SIMVAR_DUCT_PRESSURE>PNEUMATICS DUCT PRESSURE:#PACK_ID#</SIMVAR_DUCT_PRESSURE> <SIMVAR_DUCT_TEMPERATURE>PNEUMATICS DUCT TEMPERATURE:#AREA_ID#</SIMVAR_DUCT_TEMPERATURE> <UNITS_DUCT_PRESSURE>psi</UNITS_DUCT_PRESSURE> <UNITS_DUCT_TEMPERATURE>celsius</UNITS_DUCT_TEMPERATURE> </Parameters> <Parameters Type="Default"> <GET_DUCT_PRESSURE>(A:#SIMVAR_DUCT_PRESSURE#, #UNITS_DUCT_PRESSURE#)</GET_DUCT_PRESSURE> <GET_DUCT_TEMPERATURE>(A:#SIMVAR_DUCT_TEMPERATURE#, #UNITS_DUCT_TEMPERATURE#)</GET_DUCT_TEMPERATURE> </Parameters> <ReturnParameters> <SIMVAR_DUCT#OUT_PARAM_SUFFIX#_PRESSURE>#SIMVAR_DUCT_PRESSURE#</SIMVAR_DUCT#OUT_PARAM_SUFFIX#_PRESSURE> <SIMVAR_DUCT#OUT_PARAM_SUFFIX#_TEMPERATURE>#SIMVAR_DUCT_TEMPERATURE#</SIMVAR_DUCT#OUT_PARAM_SUFFIX#_TEMPERATURE> <GET_DUCT#OUT_PARAM_SUFFIX#_PRESSURE>#GET_DUCT_PRESSURE#</GET_DUCT#OUT_PARAM_SUFFIX#_PRESSURE> <GET_DUCT#OUT_PARAM_SUFFIX#_TEMPERATURE>#GET_DUCT_TEMPERATURE#</GET_DUCT#OUT_PARAM_SUFFIX#_TEMPERATURE> </ReturnParameters> </ParametersFn>Parameters initialization:
- Override
ParametersFn used:
- Default
Parameters set:
- PACK_ID
- AREA_ID
- Default
Parameters set:
- SIMVAR_DUCT_PRESSURE (using PACK_ID)
- SIMVAR_DUCT_TEMPERATURE (using AREA_ID)
- UNITS_DUCT_PRESSURE
- UNITS_DUCT_TEMPERATURE
- Default
Parameters set:
- GET_DUCT_PRESSURE (using SIMVAR_DUCT_PRESSURE, UNITS_DUCT_PRESSURE)
- GET_DUCT_TEMPERATURE (using SIMVAR_DUCT_TEMPERATURE, UNITS_DUCT_TEMPERATURE)
Return parameters:
Parameters set:
- SIMVAR_DUCT#OUT_PARAM_SUFFIX#_PRESSURE (using SIMVAR_DUCT_PRESSURE)
- SIMVAR_DUCT#OUT_PARAM_SUFFIX#_TEMPERATURE (using SIMVAR_DUCT_TEMPERATURE)
- GET_DUCT#OUT_PARAM_SUFFIX#_PRESSURE (using GET_DUCT_PRESSURE)
- GET_DUCT#OUT_PARAM_SUFFIX#_TEMPERATURE (using GET_DUCT_TEMPERATURE)
- Override
ASOBO_Pneumatics_Duct_Overheat_Parameters
Definition from XML<ParametersFn Name="ASOBO_Pneumatics_Duct_Overheat_Parameters"> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Pneumatics_Duct_Parameters"/> </Parameters> <Parameters Type="Default"> <OVERHEAT_TEMP>40</OVERHEAT_TEMP> </Parameters> <ReturnParameters> <IS_OVERHEATING>#GET_DUCT_TEMPERATURE# #OVERHEAT_TEMP# ></IS_OVERHEATING> </ReturnParameters> </ParametersFn>Parameters initialization:
- Override
ParametersFn used:
- Default
Parameters set:
- OVERHEAT_TEMP
Return parameters:
Parameters set:
- IS_OVERHEATING (using GET_DUCT_TEMPERATURE, OVERHEAT_TEMP)
- Override
ASOBO_Pneumatics_Duct_Overheat_Emissive_Parameters
Definition from XML<ParametersFn Name="ASOBO_Pneumatics_Duct_Overheat_Emissive_Parameters"> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Pneumatics_Duct_Overheat_Parameters"/> </Parameters> <ReturnParameters> <EMISSIVE_CODE>#IS_OVERHEATING#</EMISSIVE_CODE> </ReturnParameters> </ParametersFn>Parameters initialization:
- Override
ParametersFn used:
Return parameters:
Parameters set:
- EMISSIVE_CODE (using IS_OVERHEATING)
- Override
ASOBO_Pneumatics_APU_Bleed_Parameters
Definition from XML<ParametersFn Name="ASOBO_Pneumatics_APU_Bleed_Parameters"> <Parameters Type="Default"> <SIMVAR_APU_BLEED_AIR>PNEUMATICS APU BLEED AIR</SIMVAR_APU_BLEED_AIR> </Parameters> <Parameters Type="Default"> <GET_APU_BLEED_AIR>(A:#SIMVAR_APU_BLEED_AIR#, Bool)</GET_APU_BLEED_AIR> </Parameters> <Parameters Type="Default"> <SET_APU_BLEED_AIR>(>K:APU_BLEED_AIR_SOURCE_SET)</SET_APU_BLEED_AIR> <TOGGLE_APU_BLEED_AIR>(>K:APU_BLEED_AIR_SOURCE_TOGGLE)</TOGGLE_APU_BLEED_AIR> </Parameters> <ReturnParameters> <SIMVAR_APU_BLEED_AIR>#SIMVAR_APU_BLEED_AIR#</SIMVAR_APU_BLEED_AIR> <SET_APU_BLEED_AIR>#SET_APU_BLEED_AIR#</SET_APU_BLEED_AIR> <TOGGLE_APU_BLEED_AIR>#TOGGLE_APU_BLEED_AIR#</TOGGLE_APU_BLEED_AIR> <GET_APU_BLEED_AIR>#GET_APU_BLEED_AIR#</GET_APU_BLEED_AIR> </ReturnParameters> </ParametersFn>Parameters initialization:
- Default
Parameters set:
- SIMVAR_APU_BLEED_AIR
- Default
Parameters set:
- GET_APU_BLEED_AIR (using SIMVAR_APU_BLEED_AIR)
- Default
Parameters set:
- SET_APU_BLEED_AIR
- TOGGLE_APU_BLEED_AIR
Return parameters:
Parameters set:
- SIMVAR_APU_BLEED_AIR (using SIMVAR_APU_BLEED_AIR)
- SET_APU_BLEED_AIR (using SET_APU_BLEED_AIR)
- TOGGLE_APU_BLEED_AIR (using TOGGLE_APU_BLEED_AIR)
- GET_APU_BLEED_AIR (using GET_APU_BLEED_AIR)
- Default
ASOBO_Pneumatics_Engine_Bleed_Parameters
Definition from XML<ParametersFn Name="ASOBO_Pneumatics_Engine_Bleed_Parameters"> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Get_Param_Suffix_Helper"/> </Parameters> <Parameters Type="Default"> <ENG_ID>1</ENG_ID> </Parameters> <Parameters Type="Default"> <SIMVAR_ENGINE_BLEED_AIR>PNEUMATICS ENGINE BLEED AIR:#ENG_ID#</SIMVAR_ENGINE_BLEED_AIR> <SIMVAR_ENGINE_BLEED_AIR_TEMPERATURE>PNEUMATICS ENGINE BLEED AIR TEMPERATURE:#ENG_ID#</SIMVAR_ENGINE_BLEED_AIR_TEMPERATURE> <SIMVAR_ENGINE_BLEED_AIR_PRESSURE>PNEUMATICS ENGINE BLEED AIR PRESSURE:#ENG_ID#</SIMVAR_ENGINE_BLEED_AIR_PRESSURE> <UNITS_ENGINE_BLEED_AIR_TEMPERATURE>celsius</UNITS_ENGINE_BLEED_AIR_TEMPERATURE> <UNITS_ENGINE_BLEED_AIR_PRESSURE>psi</UNITS_ENGINE_BLEED_AIR_PRESSURE> </Parameters> <Parameters Type="Default"> <GET_ENGINE_BLEED_AIR>(A:#SIMVAR_ENGINE_BLEED_AIR#, Bool)</GET_ENGINE_BLEED_AIR> <GET_ENGINE_BLEED_AIR_TEMPERATURE>(A:#SIMVAR_ENGINE_BLEED_AIR_TEMPERATURE#, #UNITS_ENGINE_BLEED_AIR_TEMPERATURE#)</GET_ENGINE_BLEED_AIR_TEMPERATURE> <GET_ENGINE_BLEED_AIR_PRESSURE>(A:#SIMVAR_ENGINE_BLEED_AIR_PRESSURE#, #UNITS_ENGINE_BLEED_AIR_PRESSURE#)</GET_ENGINE_BLEED_AIR_PRESSURE> </Parameters> <Parameters Type="Default"> <SET_ENGINE_BLEED_AIR>#ENG_ID# (>K:2:ENGINE_BLEED_AIR_SOURCE_SET)</SET_ENGINE_BLEED_AIR> <TOGGLE_ENGINE_BLEED_AIR>#ENG_ID# (>K:ENGINE_BLEED_AIR_SOURCE_TOGGLE)</TOGGLE_ENGINE_BLEED_AIR> </Parameters> <ReturnParameters> <SIMVAR_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR>#SIMVAR_ENGINE_BLEED_AIR#</SIMVAR_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR> <SIMVAR_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR_TEMPERATURE>#SIMVAR_ENGINE_BLEED_AIR_TEMPERATURE#</SIMVAR_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR_TEMPERATURE> <SIMVAR_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR_PRESSURE>#SIMVAR_ENGINE_BLEED_AIR_PRESSURE#</SIMVAR_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR_PRESSURE> <GET_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR>#GET_ENGINE_BLEED_AIR#</GET_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR> <IS_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR_ON>#GET_ENGINE_BLEED_AIR#</IS_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR_ON> <IS_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR_OFF>#GET_ENGINE_BLEED_AIR# !</IS_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR_OFF> <GET_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR_TEMPERATURE>#GET_ENGINE_BLEED_AIR_TEMPERATURE#</GET_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR_TEMPERATURE> <GET_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR_PRESSURE>#GET_ENGINE_BLEED_AIR_PRESSURE#</GET_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR_PRESSURE> <SET_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR>#SET_ENGINE_BLEED_AIR#</SET_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR> <TOGGLE_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR>#TOGGLE_ENGINE_BLEED_AIR#</TOGGLE_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR> </ReturnParameters> </ParametersFn>Parameters initialization:
- Override
ParametersFn used:
- Default
Parameters set:
- ENG_ID
- Default
Parameters set:
- SIMVAR_ENGINE_BLEED_AIR (using ENG_ID)
- SIMVAR_ENGINE_BLEED_AIR_TEMPERATURE (using ENG_ID)
- SIMVAR_ENGINE_BLEED_AIR_PRESSURE (using ENG_ID)
- UNITS_ENGINE_BLEED_AIR_TEMPERATURE
- UNITS_ENGINE_BLEED_AIR_PRESSURE
- Default
Parameters set:
- GET_ENGINE_BLEED_AIR (using SIMVAR_ENGINE_BLEED_AIR)
- GET_ENGINE_BLEED_AIR_TEMPERATURE (using SIMVAR_ENGINE_BLEED_AIR_TEMPERATURE, UNITS_ENGINE_BLEED_AIR_TEMPERATURE)
- GET_ENGINE_BLEED_AIR_PRESSURE (using SIMVAR_ENGINE_BLEED_AIR_PRESSURE, UNITS_ENGINE_BLEED_AIR_PRESSURE)
- Default
Parameters set:
- SET_ENGINE_BLEED_AIR (using ENG_ID)
- TOGGLE_ENGINE_BLEED_AIR (using ENG_ID)
Return parameters:
Parameters set:
- SIMVAR_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR (using SIMVAR_ENGINE_BLEED_AIR)
- SIMVAR_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR_TEMPERATURE (using SIMVAR_ENGINE_BLEED_AIR_TEMPERATURE)
- SIMVAR_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR_PRESSURE (using SIMVAR_ENGINE_BLEED_AIR_PRESSURE)
- GET_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR (using GET_ENGINE_BLEED_AIR)
- IS_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR_ON (using GET_ENGINE_BLEED_AIR)
- IS_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR_OFF (using GET_ENGINE_BLEED_AIR)
- GET_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR_TEMPERATURE (using GET_ENGINE_BLEED_AIR_TEMPERATURE)
- GET_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR_PRESSURE (using GET_ENGINE_BLEED_AIR_PRESSURE)
- SET_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR (using SET_ENGINE_BLEED_AIR)
- TOGGLE_ENGINE#OUT_PARAM_SUFFIX#_BLEED_AIR (using TOGGLE_ENGINE_BLEED_AIR)
- Override
ASOBO_Pneumatics_Engine_Bleed_Overheat_Parameters
Definition from XML<ParametersFn Name="ASOBO_Pneumatics_Engine_Bleed_Overheat_Parameters"> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Pneumatics_Engine_Bleed_Parameters"/> </Parameters> <Parameters Type="Default"> <OVERHEAT_TEMP>300</OVERHEAT_TEMP> </Parameters> <ReturnParameters> <IS_OVERHEATING>#GET_ENGINE_BLEED_AIR_TEMPERATURE# #OVERHEAT_TEMP# ></IS_OVERHEATING> </ReturnParameters> </ParametersFn>Parameters initialization:
- Override
ParametersFn used:
- Default
Parameters set:
- OVERHEAT_TEMP
Return parameters:
Parameters set:
- IS_OVERHEATING (using GET_ENGINE_BLEED_AIR_TEMPERATURE, OVERHEAT_TEMP)
- Override
ASOBO_Pneumatics_Engine_Bleed_Overpressure_Parameters
Definition from XML<ParametersFn Name="ASOBO_Pneumatics_Engine_Bleed_Overpressure_Parameters"> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Pneumatics_Engine_Bleed_Parameters"/> </Parameters> <Parameters Type="Default"> <OVERPRESSURE_THRESHOLD>40</OVERPRESSURE_THRESHOLD> </Parameters> <ReturnParameters> <IS_OVER_PRESSURE>#GET_ENGINE_BLEED_AIR_PRESSURE# #OVERPRESSURE_THRESHOLD# ></IS_OVER_PRESSURE> </ReturnParameters> </ParametersFn>Parameters initialization:
- Override
ParametersFn used:
- Default
Parameters set:
- OVERPRESSURE_THRESHOLD
Return parameters:
Parameters set:
- IS_OVER_PRESSURE (using GET_ENGINE_BLEED_AIR_PRESSURE, OVERPRESSURE_THRESHOLD)
- Override
ASOBO_Pneumatics_Valve_Parameters
Definition from XML<ParametersFn Name="ASOBO_Pneumatics_Valve_Parameters"> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Get_Param_Suffix_Helper"/> </Parameters> <Parameters Type="Default"> <VALVE_ID>1</VALVE_ID> </Parameters> <Parameters Type="Default"> <SIMVAR_VALVE_SWITCH>PNEUMATICS VALVE SWITCH:#VALVE_ID#</SIMVAR_VALVE_SWITCH> <SIMVAR_VALVE_STATUS>PNEUMATICS VALVE STATUS:#VALVE_ID#</SIMVAR_VALVE_STATUS> <SIMVAR_VALVE_TARGET_STATUS>PNEUMATICS VALVE TARGET STATUS:#VALVE_ID#</SIMVAR_VALVE_TARGET_STATUS> <SIMVAR_VALVE_MODE>PNEUMATICS VALVE MODE:#VALVE_ID#</SIMVAR_VALVE_MODE> <UNITS_VALVE_STATUS>percent</UNITS_VALVE_STATUS> <UNITS_VALVE_MODE>enum</UNITS_VALVE_MODE> </Parameters> <Parameters Type="Default"> <GET_VALVE_SWITCH>(A:#SIMVAR_VALVE_SWITCH#, Bool)</GET_VALVE_SWITCH> <GET_VALVE_STATUS>(A:#SIMVAR_VALVE_STATUS#, #UNITS_VALVE_STATUS#)</GET_VALVE_STATUS> <GET_VALVE_TARGET_STATUS>(A:#SIMVAR_VALVE_TARGET_STATUS#, #UNITS_VALVE_STATUS#)</GET_VALVE_TARGET_STATUS> <GET_VALVE_MODE>(A:#SIMVAR_VALVE_MODE#, #UNITS_VALVE_MODE#)</GET_VALVE_MODE> </Parameters> <Parameters Type="Default"> <SET_VALVE>#VALVE_ID# (>K:2:PNEUMATICS_VALVE_SET)</SET_VALVE> <TOGGLE_VALVE>#VALVE_ID# (>K:PNEUMATICS_VALVE_TOGGLE)</TOGGLE_VALVE> <SET_VALVE_MODE>d #GET_VALVE_MODE# != if{ #VALVE_ID# (>K:2:PNEUMATICS_VALVE_MODE_SET) }</SET_VALVE_MODE> </Parameters> <ReturnParameters> <SIMVAR_VALVE#OUT_PARAM_SUFFIX#_SWITCH>#SIMVAR_VALVE_SWITCH#</SIMVAR_VALVE#OUT_PARAM_SUFFIX#_SWITCH> <SIMVAR_VALVE#OUT_PARAM_SUFFIX#_TARGET_STATUS>#SIMVAR_VALVE_TARGET_STATUS#</SIMVAR_VALVE#OUT_PARAM_SUFFIX#_TARGET_STATUS> <SIMVAR_VALVE#OUT_PARAM_SUFFIX#_STATUS>#SIMVAR_VALVE_STATUS#</SIMVAR_VALVE#OUT_PARAM_SUFFIX#_STATUS> <SIMVAR_VALVE#OUT_PARAM_SUFFIX#_MODE>#SIMVAR_VALVE_MODE#</SIMVAR_VALVE#OUT_PARAM_SUFFIX#_MODE> <GET_VALVE#OUT_PARAM_SUFFIX#_SWITCH>#GET_VALVE_SWITCH#</GET_VALVE#OUT_PARAM_SUFFIX#_SWITCH> <GET_VALVE#OUT_PARAM_SUFFIX#_STATUS>#GET_VALVE_STATUS#</GET_VALVE#OUT_PARAM_SUFFIX#_STATUS> <GET_VALVE#OUT_PARAM_SUFFIX#_TARGET_STATUS>#GET_VALVE_TARGET_STATUS#</GET_VALVE#OUT_PARAM_SUFFIX#_TARGET_STATUS> <IS_VALVE#OUT_PARAM_SUFFIX#_OPEN>#GET_VALVE_STATUS# 0 ></IS_VALVE#OUT_PARAM_SUFFIX#_OPEN> <IS_VALVE#OUT_PARAM_SUFFIX#_CLOSED>#GET_VALVE_STATUS# 0 ==</IS_VALVE#OUT_PARAM_SUFFIX#_CLOSED> <GET_VALVE#OUT_PARAM_SUFFIX#_MODE>#GET_VALVE_MODE#</GET_VALVE#OUT_PARAM_SUFFIX#_MODE> <IS_VALVE#OUT_PARAM_SUFFIX#_MODE_AUTO>#GET_VALVE_MODE# @Pneumatic_Valve_Mode_Auto ==</IS_VALVE#OUT_PARAM_SUFFIX#_MODE_AUTO> <IS_VALVE#OUT_PARAM_SUFFIX#_MODE_MANUAL>#GET_VALVE_MODE# @Pneumatic_Valve_Mode_Manual ==</IS_VALVE#OUT_PARAM_SUFFIX#_MODE_MANUAL> <IS_VALVE#OUT_PARAM_SUFFIX#_MODE_OPEN>#GET_VALVE_MODE# @Pneumatic_Valve_Mode_Open ==</IS_VALVE#OUT_PARAM_SUFFIX#_MODE_OPEN> <IS_VALVE#OUT_PARAM_SUFFIX#_MODE_CLOSED>#GET_VALVE_MODE# @Pneumatic_Valve_Mode_Closed ==</IS_VALVE#OUT_PARAM_SUFFIX#_MODE_CLOSED> <SET_VALVE#OUT_PARAM_SUFFIX#>#SET_VALVE#</SET_VALVE#OUT_PARAM_SUFFIX#> <SET_VALVE#OUT_PARAM_SUFFIX#_OPEN>100 #SET_VALVE#</SET_VALVE#OUT_PARAM_SUFFIX#_OPEN> <SET_VALVE#OUT_PARAM_SUFFIX#_CLOSED>0 #SET_VALVE#</SET_VALVE#OUT_PARAM_SUFFIX#_CLOSED> <TOGGLE_VALVE#OUT_PARAM_SUFFIX#>#TOGGLE_VALVE#</TOGGLE_VALVE#OUT_PARAM_SUFFIX#> <SET_VALVE#OUT_PARAM_SUFFIX#_MODE>#SET_VALVE_MODE#</SET_VALVE#OUT_PARAM_SUFFIX#_MODE> <SET_VALVE#OUT_PARAM_SUFFIX#_MODE_AUTO>@Pneumatic_Valve_Mode_Auto #SET_VALVE_MODE#</SET_VALVE#OUT_PARAM_SUFFIX#_MODE_AUTO> <SET_VALVE#OUT_PARAM_SUFFIX#_MODE_MANUAL>@Pneumatic_Valve_Mode_Manual #SET_VALVE_MODE#</SET_VALVE#OUT_PARAM_SUFFIX#_MODE_MANUAL> <SET_VALVE#OUT_PARAM_SUFFIX#_MODE_OPEN>@Pneumatic_Valve_Mode_Open #SET_VALVE_MODE#</SET_VALVE#OUT_PARAM_SUFFIX#_MODE_OPEN> <SET_VALVE#OUT_PARAM_SUFFIX#_MODE_CLOSED>@Pneumatic_Valve_Mode_Closed #SET_VALVE_MODE#</SET_VALVE#OUT_PARAM_SUFFIX#_MODE_CLOSED> </ReturnParameters> </ParametersFn>Parameters initialization:
- Override
ParametersFn used:
- Default
Parameters set:
- VALVE_ID
- Default
Parameters set:
- SIMVAR_VALVE_SWITCH (using VALVE_ID)
- SIMVAR_VALVE_STATUS (using VALVE_ID)
- SIMVAR_VALVE_TARGET_STATUS (using VALVE_ID)
- SIMVAR_VALVE_MODE (using VALVE_ID)
- UNITS_VALVE_STATUS
- UNITS_VALVE_MODE
- Default
Parameters set:
- GET_VALVE_SWITCH (using SIMVAR_VALVE_SWITCH)
- GET_VALVE_STATUS (using SIMVAR_VALVE_STATUS, UNITS_VALVE_STATUS)
- GET_VALVE_TARGET_STATUS (using SIMVAR_VALVE_TARGET_STATUS, UNITS_VALVE_STATUS)
- GET_VALVE_MODE (using SIMVAR_VALVE_MODE, UNITS_VALVE_MODE)
- Default
Parameters set:
- SET_VALVE (using VALVE_ID)
- TOGGLE_VALVE (using VALVE_ID)
- SET_VALVE_MODE (using GET_VALVE_MODE, VALVE_ID)
Return parameters:
Parameters set:
- SIMVAR_VALVE#OUT_PARAM_SUFFIX#_SWITCH (using SIMVAR_VALVE_SWITCH)
- SIMVAR_VALVE#OUT_PARAM_SUFFIX#_TARGET_STATUS (using SIMVAR_VALVE_TARGET_STATUS)
- SIMVAR_VALVE#OUT_PARAM_SUFFIX#_STATUS (using SIMVAR_VALVE_STATUS)
- SIMVAR_VALVE#OUT_PARAM_SUFFIX#_MODE (using SIMVAR_VALVE_MODE)
- GET_VALVE#OUT_PARAM_SUFFIX#_SWITCH (using GET_VALVE_SWITCH)
- GET_VALVE#OUT_PARAM_SUFFIX#_STATUS (using GET_VALVE_STATUS)
- GET_VALVE#OUT_PARAM_SUFFIX#_TARGET_STATUS (using GET_VALVE_TARGET_STATUS)
- IS_VALVE#OUT_PARAM_SUFFIX#_OPEN (using GET_VALVE_STATUS)
- IS_VALVE#OUT_PARAM_SUFFIX#_CLOSED (using GET_VALVE_STATUS)
- GET_VALVE#OUT_PARAM_SUFFIX#_MODE (using GET_VALVE_MODE)
- IS_VALVE#OUT_PARAM_SUFFIX#_MODE_AUTO (using GET_VALVE_MODE)
- IS_VALVE#OUT_PARAM_SUFFIX#_MODE_MANUAL (using GET_VALVE_MODE)
- IS_VALVE#OUT_PARAM_SUFFIX#_MODE_OPEN (using GET_VALVE_MODE)
- IS_VALVE#OUT_PARAM_SUFFIX#_MODE_CLOSED (using GET_VALVE_MODE)
- SET_VALVE#OUT_PARAM_SUFFIX# (using SET_VALVE)
- SET_VALVE#OUT_PARAM_SUFFIX#_OPEN (using SET_VALVE)
- SET_VALVE#OUT_PARAM_SUFFIX#_CLOSED (using SET_VALVE)
- TOGGLE_VALVE#OUT_PARAM_SUFFIX# (using TOGGLE_VALVE)
- SET_VALVE#OUT_PARAM_SUFFIX#_MODE (using SET_VALVE_MODE)
- SET_VALVE#OUT_PARAM_SUFFIX#_MODE_AUTO (using SET_VALVE_MODE)
- SET_VALVE#OUT_PARAM_SUFFIX#_MODE_MANUAL (using SET_VALVE_MODE)
- SET_VALVE#OUT_PARAM_SUFFIX#_MODE_OPEN (using SET_VALVE_MODE)
- SET_VALVE#OUT_PARAM_SUFFIX#_MODE_CLOSED (using SET_VALVE_MODE)
- Override
ASOBO_Pneumatics_Pack_Parameters
Definition from XML<ParametersFn Name="ASOBO_Pneumatics_Pack_Parameters"> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Get_Param_Suffix_Helper"/> </Parameters> <Parameters Type="Default"> <PACK_ID>1</PACK_ID> </Parameters> <Parameters Type="Default"> <SIMVAR_PACK_FLOW>PNEUMATICS PACK FLOW:#PACK_ID#</SIMVAR_PACK_FLOW> <SIMVAR_PACK_FLOW_AUTO>PNEUMATICS PACK FLOW AUTO:#PACK_ID#</SIMVAR_PACK_FLOW_AUTO> <SIMVAR_PACK_FLOW_MODE>PNEUMATICS PACK FLOW MODE:#PACK_ID#</SIMVAR_PACK_FLOW_MODE> <SIMVAR_PACK_FLOW_MODE_VALUE_LOW>PNEUMATICS PACK FLOW MODE VALUE LOW:#PACK_ID#</SIMVAR_PACK_FLOW_MODE_VALUE_LOW> <SIMVAR_PACK_FLOW_MODE_VALUE_NORM>PNEUMATICS PACK FLOW MODE VALUE NORM:#PACK_ID#</SIMVAR_PACK_FLOW_MODE_VALUE_NORM> <SIMVAR_PACK_FLOW_MODE_VALUE_HIGH>PNEUMATICS PACK FLOW MODE VALUE HIGH:#PACK_ID#</SIMVAR_PACK_FLOW_MODE_VALUE_HIGH> <SIMVAR_PACK_STATUS>PNEUMATICS PACK STATUS:#PACK_ID#</SIMVAR_PACK_STATUS> <SIMVAR_PACK_SWITCH>PNEUMATICS PACK SWITCH:#PACK_ID#</SIMVAR_PACK_SWITCH> <SIMVAR_PACK_TEMPERATURE>PNEUMATICS PACK TEMPERATURE:#PACK_ID#</SIMVAR_PACK_TEMPERATURE> <UNITS_PACK_FLOW>percent</UNITS_PACK_FLOW> <UNITS_PACK_FLOW_MODE>enum</UNITS_PACK_FLOW_MODE> <UNITS_PACK_FLOW>percent</UNITS_PACK_FLOW> <UNITS_PACK_FLOW_MODE_VALUE_LOW>percent</UNITS_PACK_FLOW_MODE_VALUE_LOW> <UNITS_PACK_FLOW_MODE_VALUE_NORM>percent</UNITS_PACK_FLOW_MODE_VALUE_NORM> <UNITS_PACK_FLOW_MODE_VALUE_HIGH>percent</UNITS_PACK_FLOW_MODE_VALUE_HIGH> <UNITS_PACK_TEMPERATURE>celsius</UNITS_PACK_TEMPERATURE> </Parameters> <Parameters Type="Default"> <GET_PACK_FLOW>(A:#SIMVAR_PACK_FLOW#, #UNITS_PACK_FLOW#)</GET_PACK_FLOW> <GET_PACK_FLOW_AUTO>(A:#SIMVAR_PACK_FLOW_AUTO#, Bool)</GET_PACK_FLOW_AUTO> <GET_PACK_FLOW_MODE>(A:#SIMVAR_PACK_FLOW_MODE#, #UNITS_PACK_FLOW_MODE#)</GET_PACK_FLOW_MODE> <GET_PACK_FLOW_MODE_VALUE_LOW>(A:#SIMVAR_PACK_FLOW_MODE_VALUE_LOW#, #UNITS_PACK_FLOW_MODE_VALUE_LOW#)</GET_PACK_FLOW_MODE_VALUE_LOW> <GET_PACK_FLOW_MODE_VALUE_NORM>(A:#SIMVAR_PACK_FLOW_MODE_VALUE_NORM#, #UNITS_PACK_FLOW_MODE_VALUE_NORM#)</GET_PACK_FLOW_MODE_VALUE_NORM> <GET_PACK_FLOW_MODE_VALUE_HIGH>(A:#SIMVAR_PACK_FLOW_MODE_VALUE_HIGH#, #UNITS_PACK_FLOW_MODE_VALUE_HIGH#)</GET_PACK_FLOW_MODE_VALUE_HIGH> <GET_PACK_STATUS>(A:#SIMVAR_PACK_STATUS#, Bool)</GET_PACK_STATUS> <GET_PACK_SWITCH>(A:#SIMVAR_PACK_SWITCH#, Bool)</GET_PACK_SWITCH> <GET_PACK_TEMPERATURE>(A:#SIMVAR_PACK_TEMPERATURE#, #UNITS_PACK_TEMPERATURE#)</GET_PACK_TEMPERATURE> </Parameters> <Parameters Type="Default"> <SET_PACK_FLOW>#PACK_ID# (>K:2:PNEUMATICS_PACKS_FLOW_SET)</SET_PACK_FLOW> <SET_PACK_FLOW_AUTO>#PACK_ID# (>K:2:PNEUMATICS_PACK_FLOW_AUTO_SET)</SET_PACK_FLOW_AUTO> <SET_PACK_FLOW_MODE>#PACK_ID# (>K:2:PNEUMATICS_PACK_FLOW_MODE_SET)</SET_PACK_FLOW_MODE> <SET_PACK>#PACK_ID# (>K:2:PNEUMATICS_PACK_SET)</SET_PACK> <TOGGLE_PACK>#PACK_ID# (>K:PNEUMATICS_PACK_TOGGLE)</TOGGLE_PACK> </Parameters> <ReturnParameters> <SIMVAR_PACK#OUT_PARAM_SUFFIX#_FLOW>#SIMVAR_PACK_FLOW#</SIMVAR_PACK#OUT_PARAM_SUFFIX#_FLOW> <SIMVAR_PACK#OUT_PARAM_SUFFIX#_FLOW_AUTO>#SIMVAR_PACK_FLOW_AUTO#</SIMVAR_PACK#OUT_PARAM_SUFFIX#_FLOW_AUTO> <SIMVAR_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE>#SIMVAR_PACK_FLOW_MODE#</SIMVAR_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE> <SIMVAR_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_VALUE_LOW>#SIMVAR_PACK_FLOW_MODE_VALUE_LOW#</SIMVAR_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_VALUE_LOW> <SIMVAR_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_VALUE_NORM>#SIMVAR_PACK_FLOW_MODE_VALUE_NORM#</SIMVAR_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_VALUE_NORM> <SIMVAR_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_VALUE_HIGH>#SIMVAR_PACK_FLOW_MODE_VALUE_HIGH#</SIMVAR_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_VALUE_HIGH> <SIMVAR_PACK#OUT_PARAM_SUFFIX#_STATUS>#SIMVAR_PACK_STATUS#</SIMVAR_PACK#OUT_PARAM_SUFFIX#_STATUS> <SIMVAR_PACK#OUT_PARAM_SUFFIX#_SWITCH>#SIMVAR_PACK_SWITCH#</SIMVAR_PACK#OUT_PARAM_SUFFIX#_SWITCH> <SIMVAR_PACK#OUT_PARAM_SUFFIX#_TEMPERATURE>#SIMVAR_PACK_TEMPERATURE#</SIMVAR_PACK#OUT_PARAM_SUFFIX#_TEMPERATURE> <GET_PACK#OUT_PARAM_SUFFIX#_FLOW>#GET_PACK_FLOW#</GET_PACK#OUT_PARAM_SUFFIX#_FLOW> <GET_PACK#OUT_PARAM_SUFFIX#_FLOW_AUTO>#GET_PACK_FLOW_AUTO#</GET_PACK#OUT_PARAM_SUFFIX#_FLOW_AUTO> <GET_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE>#GET_PACK_FLOW_MODE#</GET_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE> <GET_PACK#OUT_PARAM_SUFFIX#_FLOW_AUTO_ON>#GET_PACK_FLOW_AUTO# 1 ==</GET_PACK#OUT_PARAM_SUFFIX#_FLOW_AUTO_ON> <GET_PACK#OUT_PARAM_SUFFIX#_FLOW_AUTO_OFF>#GET_PACK_FLOW_AUTO# 0 ==</GET_PACK#OUT_PARAM_SUFFIX#_FLOW_AUTO_OFF> <IS_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_LOW>#GET_PACK_FLOW_MODE# @Pneumatic_Pack_Mode_Low ==</IS_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_LOW> <IS_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_NORM>#GET_PACK_FLOW_MODE# @Pneumatic_Pack_Mode_Norm ==</IS_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_NORM> <IS_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_HIGH>#GET_PACK_FLOW_MODE# @Pneumatic_Pack_Mode_High ==</IS_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_HIGH> <GET_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_VALUE_LOW>#GET_PACK_FLOW_MODE_VALUE_LOW#</GET_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_VALUE_LOW> <GET_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_VALUE_NORM>#GET_PACK_FLOW_MODE_VALUE_NORM#</GET_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_VALUE_NORM> <GET_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_VALUE_HIGH>#GET_PACK_FLOW_MODE_VALUE_HIGH#</GET_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_VALUE_HIGH> <GET_PACK#OUT_PARAM_SUFFIX#_STATUS>#GET_PACK_STATUS#</GET_PACK#OUT_PARAM_SUFFIX#_STATUS> <IS_PACK#OUT_PARAM_SUFFIX#_ON>#GET_PACK_STATUS#</IS_PACK#OUT_PARAM_SUFFIX#_ON> <IS_PACK#OUT_PARAM_SUFFIX#_OFF>#GET_PACK_STATUS# !</IS_PACK#OUT_PARAM_SUFFIX#_OFF> <GET_PACK#OUT_PARAM_SUFFIX#_SWITCH>#GET_PACK_SWITCH#</GET_PACK#OUT_PARAM_SUFFIX#_SWITCH> <GET_PACK#OUT_PARAM_SUFFIX#_TEMPERATURE>#GET_PACK_TEMPERATURE#</GET_PACK#OUT_PARAM_SUFFIX#_TEMPERATURE> <SET_PACK#OUT_PARAM_SUFFIX#_FLOW>#SET_PACK_FLOW#</SET_PACK#OUT_PARAM_SUFFIX#_FLOW> <SET_PACK#OUT_PARAM_SUFFIX#_FLOW_AUTO>#SET_PACK_FLOW_AUTO#</SET_PACK#OUT_PARAM_SUFFIX#_FLOW_AUTO> <SET_PACK#OUT_PARAM_SUFFIX#_FLOW_AUTO_ON>1 #SET_PACK_FLOW_AUTO#</SET_PACK#OUT_PARAM_SUFFIX#_FLOW_AUTO_ON> <SET_PACK#OUT_PARAM_SUFFIX#_FLOW_AUTO_OFF>0 #SET_PACK_FLOW_AUTO#</SET_PACK#OUT_PARAM_SUFFIX#_FLOW_AUTO_OFF> <SET_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE>#SET_PACK_FLOW_MODE#</SET_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE> <SET_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_LOW>@Pneumatic_Pack_Mode_Low #SET_PACK_FLOW_MODE#</SET_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_LOW> <SET_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_NORM>@Pneumatic_Pack_Mode_Norm #SET_PACK_FLOW_MODE#</SET_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_NORM> <SET_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_HIGH>@Pneumatic_Pack_Mode_High #SET_PACK_FLOW_MODE#</SET_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_HIGH> <SET_PACK#OUT_PARAM_SUFFIX#>#SET_PACK#</SET_PACK#OUT_PARAM_SUFFIX#> <SET_PACK#OUT_PARAM_SUFFIX#_ON>1 #SET_PACK#</SET_PACK#OUT_PARAM_SUFFIX#_ON> <SET_PACK#OUT_PARAM_SUFFIX#_OFF>0 #SET_PACK#</SET_PACK#OUT_PARAM_SUFFIX#_OFF> <TOGGLE_PACK#OUT_PARAM_SUFFIX#>#TOGGLE_PACK#</TOGGLE_PACK#OUT_PARAM_SUFFIX#> </ReturnParameters> </ParametersFn>Parameters initialization:
- Override
ParametersFn used:
- Default
Parameters set:
- PACK_ID
- Default
Parameters set:
- SIMVAR_PACK_FLOW (using PACK_ID)
- SIMVAR_PACK_FLOW_AUTO (using PACK_ID)
- SIMVAR_PACK_FLOW_MODE (using PACK_ID)
- SIMVAR_PACK_FLOW_MODE_VALUE_LOW (using PACK_ID)
- SIMVAR_PACK_FLOW_MODE_VALUE_NORM (using PACK_ID)
- SIMVAR_PACK_FLOW_MODE_VALUE_HIGH (using PACK_ID)
- SIMVAR_PACK_STATUS (using PACK_ID)
- SIMVAR_PACK_SWITCH (using PACK_ID)
- SIMVAR_PACK_TEMPERATURE (using PACK_ID)
- UNITS_PACK_FLOW
- UNITS_PACK_FLOW_MODE
- UNITS_PACK_FLOW_MODE_VALUE_LOW
- UNITS_PACK_FLOW_MODE_VALUE_NORM
- UNITS_PACK_FLOW_MODE_VALUE_HIGH
- UNITS_PACK_TEMPERATURE
- Default
Parameters set:
- GET_PACK_FLOW (using SIMVAR_PACK_FLOW, UNITS_PACK_FLOW)
- GET_PACK_FLOW_AUTO (using SIMVAR_PACK_FLOW_AUTO)
- GET_PACK_FLOW_MODE (using SIMVAR_PACK_FLOW_MODE, UNITS_PACK_FLOW_MODE)
- GET_PACK_FLOW_MODE_VALUE_LOW (using SIMVAR_PACK_FLOW_MODE_VALUE_LOW, UNITS_PACK_FLOW_MODE_VALUE_LOW)
- GET_PACK_FLOW_MODE_VALUE_NORM (using SIMVAR_PACK_FLOW_MODE_VALUE_NORM, UNITS_PACK_FLOW_MODE_VALUE_NORM)
- GET_PACK_FLOW_MODE_VALUE_HIGH (using SIMVAR_PACK_FLOW_MODE_VALUE_HIGH, UNITS_PACK_FLOW_MODE_VALUE_HIGH)
- GET_PACK_STATUS (using SIMVAR_PACK_STATUS)
- GET_PACK_SWITCH (using SIMVAR_PACK_SWITCH)
- GET_PACK_TEMPERATURE (using SIMVAR_PACK_TEMPERATURE, UNITS_PACK_TEMPERATURE)
- Default
Parameters set:
- SET_PACK_FLOW (using PACK_ID)
- SET_PACK_FLOW_AUTO (using PACK_ID)
- SET_PACK_FLOW_MODE (using PACK_ID)
- SET_PACK (using PACK_ID)
- TOGGLE_PACK (using PACK_ID)
Return parameters:
Parameters set:
- SIMVAR_PACK#OUT_PARAM_SUFFIX#_FLOW (using SIMVAR_PACK_FLOW)
- SIMVAR_PACK#OUT_PARAM_SUFFIX#_FLOW_AUTO (using SIMVAR_PACK_FLOW_AUTO)
- SIMVAR_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE (using SIMVAR_PACK_FLOW_MODE)
- SIMVAR_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_VALUE_LOW (using SIMVAR_PACK_FLOW_MODE_VALUE_LOW)
- SIMVAR_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_VALUE_NORM (using SIMVAR_PACK_FLOW_MODE_VALUE_NORM)
- SIMVAR_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_VALUE_HIGH (using SIMVAR_PACK_FLOW_MODE_VALUE_HIGH)
- SIMVAR_PACK#OUT_PARAM_SUFFIX#_STATUS (using SIMVAR_PACK_STATUS)
- SIMVAR_PACK#OUT_PARAM_SUFFIX#_SWITCH (using SIMVAR_PACK_SWITCH)
- SIMVAR_PACK#OUT_PARAM_SUFFIX#_TEMPERATURE (using SIMVAR_PACK_TEMPERATURE)
- GET_PACK#OUT_PARAM_SUFFIX#_FLOW (using GET_PACK_FLOW)
- GET_PACK#OUT_PARAM_SUFFIX#_FLOW_AUTO (using GET_PACK_FLOW_AUTO)
- GET_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE (using GET_PACK_FLOW_MODE)
- GET_PACK#OUT_PARAM_SUFFIX#_FLOW_AUTO_ON (using GET_PACK_FLOW_AUTO)
- GET_PACK#OUT_PARAM_SUFFIX#_FLOW_AUTO_OFF (using GET_PACK_FLOW_AUTO)
- IS_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_LOW (using GET_PACK_FLOW_MODE)
- IS_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_NORM (using GET_PACK_FLOW_MODE)
- IS_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_HIGH (using GET_PACK_FLOW_MODE)
- GET_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_VALUE_LOW (using GET_PACK_FLOW_MODE_VALUE_LOW)
- GET_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_VALUE_NORM (using GET_PACK_FLOW_MODE_VALUE_NORM)
- GET_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_VALUE_HIGH (using GET_PACK_FLOW_MODE_VALUE_HIGH)
- GET_PACK#OUT_PARAM_SUFFIX#_STATUS (using GET_PACK_STATUS)
- IS_PACK#OUT_PARAM_SUFFIX#_ON (using GET_PACK_STATUS)
- IS_PACK#OUT_PARAM_SUFFIX#_OFF (using GET_PACK_STATUS)
- GET_PACK#OUT_PARAM_SUFFIX#_SWITCH (using GET_PACK_SWITCH)
- GET_PACK#OUT_PARAM_SUFFIX#_TEMPERATURE (using GET_PACK_TEMPERATURE)
- SET_PACK#OUT_PARAM_SUFFIX#_FLOW (using SET_PACK_FLOW)
- SET_PACK#OUT_PARAM_SUFFIX#_FLOW_AUTO (using SET_PACK_FLOW_AUTO)
- SET_PACK#OUT_PARAM_SUFFIX#_FLOW_AUTO_ON (using SET_PACK_FLOW_AUTO)
- SET_PACK#OUT_PARAM_SUFFIX#_FLOW_AUTO_OFF (using SET_PACK_FLOW_AUTO)
- SET_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE (using SET_PACK_FLOW_MODE)
- SET_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_LOW (using SET_PACK_FLOW_MODE)
- SET_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_NORM (using SET_PACK_FLOW_MODE)
- SET_PACK#OUT_PARAM_SUFFIX#_FLOW_MODE_HIGH (using SET_PACK_FLOW_MODE)
- SET_PACK#OUT_PARAM_SUFFIX# (using SET_PACK)
- SET_PACK#OUT_PARAM_SUFFIX#_ON (using SET_PACK)
- SET_PACK#OUT_PARAM_SUFFIX#_OFF (using SET_PACK)
- TOGGLE_PACK#OUT_PARAM_SUFFIX# (using TOGGLE_PACK)
- Override
ASOBO_Pneumatics_Pack_Overheat_Parameters
Definition from XML<ParametersFn Name="ASOBO_Pneumatics_Pack_Overheat_Parameters"> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Pneumatics_Pack_Parameters"/> </Parameters> <Parameters Type="Default"> <OVERHEAT_TEMP>40</OVERHEAT_TEMP> </Parameters> <ReturnParameters> <IS_OVERHEATING>#GET_PACK_TEMPERATURE# #OVERHEAT_TEMP# ></IS_OVERHEATING> </ReturnParameters> </ParametersFn>Parameters initialization:
- Override
ParametersFn used:
- Default
Parameters set:
- OVERHEAT_TEMP
Return parameters:
Parameters set:
- IS_OVERHEATING (using GET_PACK_TEMPERATURE, OVERHEAT_TEMP)
- Override
ASOBO_Pneumatics_Pack_Overheat_Emissive_Parameters
Definition from XML<ParametersFn Name="ASOBO_Pneumatics_Pack_Overheat_Emissive_Parameters"> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Pneumatics_Pack_Overheat_Parameters"/> </Parameters> <ReturnParameters> <EMISSIVE_CODE>#IS_OVERHEATING#</EMISSIVE_CODE> </ReturnParameters> </ParametersFn>Parameters initialization:
- Override
ParametersFn used:
Return parameters:
Parameters set:
- EMISSIVE_CODE (using IS_OVERHEATING)
- Override
ASOBO_Pneumatics_Area_Parameters
Definition from XML<ParametersFn Name="ASOBO_Pneumatics_Area_Parameters"> <Parameters Type="Override"> <UseParametersFn Name="ASOBO_Get_Param_Suffix_Helper"/> </Parameters> <Parameters Type="Default"> <AREA_ID>1</AREA_ID> </Parameters> <Parameters Type="Default"> <SIMVAR_AREA_TEMPERATURE>PNEUMATICS AREA TEMPERATURE:#AREA_ID#</SIMVAR_AREA_TEMPERATURE> <SIMVAR_AREA_TARGET_TEMPERATURE>PNEUMATICS AREA TARGET TEMPERATURE:#AREA_ID#</SIMVAR_AREA_TARGET_TEMPERATURE> <SIMVAR_AREA_TARGET_TEMPERATURE_PCT>PNEUMATICS AREA TARGET TEMPERATURE PCT:#AREA_ID#</SIMVAR_AREA_TARGET_TEMPERATURE_PCT> <UNITS_AREA_TEMPERATURE>celsius</UNITS_AREA_TEMPERATURE> <UNITS_AREA_TARGET_TEMPERATURE>celsius</UNITS_AREA_TARGET_TEMPERATURE> <UNITS_AREA_TARGET_TEMPERATURE_PCT>percent</UNITS_AREA_TARGET_TEMPERATURE_PCT> </Parameters> <Parameters Type="Default"> <GET_AREA_TEMPERATURE>(A:#SIMVAR_AREA_TEMPERATURE#, #UNITS_AREA_TEMPERATURE#)</GET_AREA_TEMPERATURE> <GET_AREA_TARGET_TEMPERATURE>(A:#SIMVAR_AREA_TARGET_TEMPERATURE#, #UNITS_AREA_TARGET_TEMPERATURE#)</GET_AREA_TARGET_TEMPERATURE> <GET_AREA_TARGET_TEMPERATURE_PCT>(A:#SIMVAR_AREA_TARGET_TEMPERATURE_PCT#, #UNITS_AREA_TARGET_TEMPERATURE_PCT#)</GET_AREA_TARGET_TEMPERATURE_PCT> </Parameters> <Parameters Type="Default"> <SET_AREA_TARGET_TEMPERATURE>#AREA_ID# (>K:2:PNEUMATICS_AREA_TEMPERATURE_SET)</SET_AREA_TARGET_TEMPERATURE> <SET_AREA_TARGET_TEMPERATURE_PCT>(>A:1:#SIMVAR_AREA_TARGET_TEMPERATURE_PCT#, #UNITS_AREA_TARGET_TEMPERATURE_PCT#)</SET_AREA_TARGET_TEMPERATURE_PCT> </Parameters> <ReturnParameters> <SIMVAR_AREA#OUT_PARAM_SUFFIX#_TEMPERATURE>#SIMVAR_AREA_TEMPERATURE#</SIMVAR_AREA#OUT_PARAM_SUFFIX#_TEMPERATURE> <SIMVAR_AREA#OUT_PARAM_SUFFIX#_TARGET_TEMPERATURE>#SIMVAR_AREA_TARGET_TEMPERATURE#</SIMVAR_AREA#OUT_PARAM_SUFFIX#_TARGET_TEMPERATURE> <SIMVAR_AREA#OUT_PARAM_SUFFIX#_TARGET_TEMPERATURE_PCT>#SIMVAR_AREA_TARGET_TEMPERATURE_PCT#</SIMVAR_AREA#OUT_PARAM_SUFFIX#_TARGET_TEMPERATURE_PCT> <GET_AREA#OUT_PARAM_SUFFIX#_TEMPERATURE>#GET_AREA_TEMPERATURE#</GET_AREA#OUT_PARAM_SUFFIX#_TEMPERATURE> <GET_AREA#OUT_PARAM_SUFFIX#_TARGET_TEMPERATURE>#GET_AREA_TARGET_TEMPERATURE#</GET_AREA#OUT_PARAM_SUFFIX#_TARGET_TEMPERATURE> <GET_AREA#OUT_PARAM_SUFFIX#_TARGET_TEMPERATURE_PCT>#GET_AREA_TARGET_TEMPERATURE_PCT#</GET_AREA#OUT_PARAM_SUFFIX#_TARGET_TEMPERATURE_PCT> <SET_AREA#OUT_PARAM_SUFFIX#_TARGET_TEMPERATURE>#SET_AREA_TARGET_TEMPERATURE#</SET_AREA#OUT_PARAM_SUFFIX#_TARGET_TEMPERATURE> <SET_AREA#OUT_PARAM_SUFFIX#_TARGET_TEMPERATURE_PCT>#SET_AREA_TARGET_TEMPERATURE_PCT#</SET_AREA#OUT_PARAM_SUFFIX#_TARGET_TEMPERATURE_PCT> </ReturnParameters> </ParametersFn>Parameters initialization:
- Override
ParametersFn used:
- Default
Parameters set:
- AREA_ID
- Default
Parameters set:
- SIMVAR_AREA_TEMPERATURE (using AREA_ID)
- SIMVAR_AREA_TARGET_TEMPERATURE (using AREA_ID)
- SIMVAR_AREA_TARGET_TEMPERATURE_PCT (using AREA_ID)
- UNITS_AREA_TEMPERATURE
- UNITS_AREA_TARGET_TEMPERATURE
- UNITS_AREA_TARGET_TEMPERATURE_PCT
- Default
Parameters set:
- GET_AREA_TEMPERATURE (using SIMVAR_AREA_TEMPERATURE, UNITS_AREA_TEMPERATURE)
- GET_AREA_TARGET_TEMPERATURE (using SIMVAR_AREA_TARGET_TEMPERATURE, UNITS_AREA_TARGET_TEMPERATURE)
- GET_AREA_TARGET_TEMPERATURE_PCT (using SIMVAR_AREA_TARGET_TEMPERATURE_PCT, UNITS_AREA_TARGET_TEMPERATURE_PCT)
- Default
Parameters set:
- SET_AREA_TARGET_TEMPERATURE (using AREA_ID)
- SET_AREA_TARGET_TEMPERATURE_PCT (using SIMVAR_AREA_TARGET_TEMPERATURE_PCT, UNITS_AREA_TARGET_TEMPERATURE_PCT)
Return parameters:
Parameters set:
- SIMVAR_AREA#OUT_PARAM_SUFFIX#_TEMPERATURE (using SIMVAR_AREA_TEMPERATURE)
- SIMVAR_AREA#OUT_PARAM_SUFFIX#_TARGET_TEMPERATURE (using SIMVAR_AREA_TARGET_TEMPERATURE)
- SIMVAR_AREA#OUT_PARAM_SUFFIX#_TARGET_TEMPERATURE_PCT (using SIMVAR_AREA_TARGET_TEMPERATURE_PCT)
- GET_AREA#OUT_PARAM_SUFFIX#_TEMPERATURE (using GET_AREA_TEMPERATURE)
- GET_AREA#OUT_PARAM_SUFFIX#_TARGET_TEMPERATURE (using GET_AREA_TARGET_TEMPERATURE)
- GET_AREA#OUT_PARAM_SUFFIX#_TARGET_TEMPERATURE_PCT (using GET_AREA_TARGET_TEMPERATURE_PCT)
- SET_AREA#OUT_PARAM_SUFFIX#_TARGET_TEMPERATURE (using SET_AREA_TARGET_TEMPERATURE)
- SET_AREA#OUT_PARAM_SUFFIX#_TARGET_TEMPERATURE_PCT (using SET_AREA_TARGET_TEMPERATURE_PCT)
- Override
ASOBO_Pneumatics_Alternate_Static_Source_Parameters
Definition from XML<ParametersFn Name="ASOBO_Pneumatics_Alternate_Static_Source_Parameters"> <Parameters Type="Default"> <SIMVAR_ALTERNATE_STATIC_SOURCE_STATE>ALTERNATE STATIC SOURCE OPEN</SIMVAR_ALTERNATE_STATIC_SOURCE_STATE> </Parameters> <Parameters Type="Default"> <GET_ALTERNATE_STATIC_SOURCE_STATE>(A:#SIMVAR_ALTERNATE_STATIC_SOURCE_STATE#, Bool)</GET_ALTERNATE_STATIC_SOURCE_STATE> <TOGGLE_ALTERNATE_STATIC_SOURCE_STATE>(>K:TOGGLE_ALTERNATE_STATIC)</TOGGLE_ALTERNATE_STATIC_SOURCE_STATE> </Parameters> <Parameters Type="Default"> <SET_ALTERNATE_STATIC_SOURCE_STATE>#GET_ALTERNATE_STATIC_SOURCE_STATE# != if{ #TOGGLE_ALTERNATE_STATIC_SOURCE_STATE# }</SET_ALTERNATE_STATIC_SOURCE_STATE> </Parameters> <ReturnParameters> <SIMVAR_ALTERNATE_STATIC_SOURCE_STATE>#SIMVAR_ALTERNATE_STATIC_SOURCE_STATE#</SIMVAR_ALTERNATE_STATIC_SOURCE_STATE> <GET_ALTERNATE_STATIC_SOURCE_STATE>#GET_ALTERNATE_STATIC_SOURCE_STATE#</GET_ALTERNATE_STATIC_SOURCE_STATE> <TOGGLE_ALTERNATE_STATIC_SOURCE_STATE>#TOGGLE_ALTERNATE_STATIC_SOURCE_STATE#</TOGGLE_ALTERNATE_STATIC_SOURCE_STATE> <SET_ALTERNATE_STATIC_SOURCE_STATE>#SET_ALTERNATE_STATIC_SOURCE_STATE#</SET_ALTERNATE_STATIC_SOURCE_STATE> <SET_ALTERNATE_STATIC_SOURCE_OPEN>1 #SET_ALTERNATE_STATIC_SOURCE_STATE#</SET_ALTERNATE_STATIC_SOURCE_OPEN> <SET_ALTERNATE_STATIC_SOURCE_CLOSED>0 #SET_ALTERNATE_STATIC_SOURCE_STATE#</SET_ALTERNATE_STATIC_SOURCE_CLOSED> </ReturnParameters> </ParametersFn>Parameters initialization:
- Default
Parameters set:
- SIMVAR_ALTERNATE_STATIC_SOURCE_STATE
- Default
Parameters set:
- GET_ALTERNATE_STATIC_SOURCE_STATE (using SIMVAR_ALTERNATE_STATIC_SOURCE_STATE)
- TOGGLE_ALTERNATE_STATIC_SOURCE_STATE
- Default
Parameters set:
- SET_ALTERNATE_STATIC_SOURCE_STATE (using GET_ALTERNATE_STATIC_SOURCE_STATE, TOGGLE_ALTERNATE_STATIC_SOURCE_STATE)
Return parameters:
Parameters set:
- SIMVAR_ALTERNATE_STATIC_SOURCE_STATE (using SIMVAR_ALTERNATE_STATIC_SOURCE_STATE)
- GET_ALTERNATE_STATIC_SOURCE_STATE (using GET_ALTERNATE_STATIC_SOURCE_STATE)
- TOGGLE_ALTERNATE_STATIC_SOURCE_STATE (using TOGGLE_ALTERNATE_STATIC_SOURCE_STATE)
- SET_ALTERNATE_STATIC_SOURCE_STATE (using SET_ALTERNATE_STATIC_SOURCE_STATE)
- SET_ALTERNATE_STATIC_SOURCE_OPEN (using SET_ALTERNATE_STATIC_SOURCE_STATE)
- SET_ALTERNATE_STATIC_SOURCE_CLOSED (using SET_ALTERNATE_STATIC_SOURCE_STATE)
- Default