[Go back to index]
Asobo\Common\Subtemplates\Autopilot_Subtemplates.xml
Source XML
<ModelBehaviors>
<!-- ####################### -->
<!-- ##### AP PUSH BTN ##### -->
<!-- ####################### -->
<Template Name="ASOBO_AUTOPILOT_Push_Active_Template">
<Parameters Type="Default">
<Condition Valid="ACTIVE_EMISSIVE_BUTTON">
<True>
<ACTIVE_NODE_ID>#NODE_ID#</ACTIVE_NODE_ID>
</True>
<False>
<Condition Check="BASE_NODE_ID">
<True>
<ACTIVE_NODE_ID>#BASE_NODE_ID#_Active#SUFFIX_ID#</ACTIVE_NODE_ID>
</True>
<False>
<ACTIVE_NODE_ID>AUTOPILOT_Push_#DEFAULT_NAME#_Active#SUFFIX_ID#</ACTIVE_NODE_ID>
</False>
</Condition>
</False>
</Condition>
<RECURSIVE_ID>2</RECURSIVE_ID>
</Parameters>
<Component ID="#ACTIVE_NODE_ID#_Active" Node="#ACTIVE_NODE_ID#">
<Condition Check="EMISSIVE_SIMVAR_ACTIVE">
<True>
<UseTemplate Name="ASOBO_GT_Emissive_Gauge_Sim">
<ALT_CODE>(L:XMLVAR_LTS_Test)</ALT_CODE>
<Condition Check="EMISSIVE_SIMVAR_ACTIVE">
<EMISSIVE_SIMVAR>#EMISSIVE_SIMVAR_ACTIVE#</EMISSIVE_SIMVAR>
</Condition>
<Condition Valid="EMISSIVE_CODE_ACTIVE_DRIVES_VISIBILITY">
<EMISSIVE_DRIVES_VISIBILITY>#EMISSIVE_CODE_ACTIVE_DRIVES_VISIBILITY#</EMISSIVE_DRIVES_VISIBILITY>
</Condition>
</UseTemplate>
</True>
<False>
<UseTemplate Name="ASOBO_GT_Emissive_Gauge">
<ALT_CODE>(L:XMLVAR_LTS_Test)</ALT_CODE>
<Condition Check="EMISSIVE_CODE_ACTIVE">
<EMISSIVE_CODE>#EMISSIVE_CODE_ACTIVE#</EMISSIVE_CODE>
</Condition>
<Condition Valid="EMISSIVE_CODE_ACTIVE_DRIVES_VISIBILITY">
<EMISSIVE_DRIVES_VISIBILITY>#EMISSIVE_CODE_ACTIVE_DRIVES_VISIBILITY#</EMISSIVE_DRIVES_VISIBILITY>
</Condition>
</UseTemplate>
</False>
</Condition>
</Component>
<Condition Valid="ACTIVE_NODE_ID#RECURSIVE_ID#">
<True>
<UseTemplate Name="ASOBO_AUTOPILOT_Push_Active_Template">
<RECURSIVE_ID Process="Int">#RECURSIVE_ID# 1 +</RECURSIVE_ID>
<ACTIVE_NODE_ID Process="Param">ACTIVE_NODE_ID#RECURSIVE_ID#</ACTIVE_NODE_ID>
</UseTemplate>
</True>
</Condition>
</Template>
<Template Name="ASOBO_AUTOPILOT_Push_Emissive_Template">
<Parameters Type="Default">
<DEFAULT_TEMPLATE_EMISSIVE>ASOBO_LIGHTING_Cabin_Emissive_Template</DEFAULT_TEMPLATE_EMISSIVE>
<Condition Check="BASE_NODE_ID">
<True>
<EMISSIVE_NODE_ID>#BASE_NODE_ID#_Text#SUFFIX_ID#</EMISSIVE_NODE_ID>
</True>
<False>
<EMISSIVE_NODE_ID>AUTOPILOT_Push_#DEFAULT_NAME#_Text#SUFFIX_ID#</EMISSIVE_NODE_ID>
</False>
</Condition>
<Switch>
<Case Check="POTENTIOMETER">
<EMISSIVE_CODE>(A:LIGHT POTENTIOMETER:#POTENTIOMETER#, Percent over 100)</EMISSIVE_CODE>
</Case>
<Case Check="SIMVAR_POWER_SETTING">
<EMISSIVE_CODE>(A:#SIMVAR_POWER_SETTING#, Percent over 100)</EMISSIVE_CODE>
</Case>
<Default>
<EMISSIVE_CODE>1</EMISSIVE_CODE>
</Default>
</Switch>
</Parameters>
<Condition Check="CIRCUIT_ID">
<False>
<UseTemplate Name="#DEFAULT_TEMPLATE_EMISSIVE#">
<NODE_ID>#EMISSIVE_NODE_ID#</NODE_ID>
</UseTemplate>
</False>
<True>
<Component ID="#EMISSIVE_NODE_ID#_Emissive_Node" Node="#EMISSIVE_NODE_ID#">
<UseTemplate Name="ASOBO_GT_Emissive_Gauge">
<FAILURE>(A:CIRCUIT ON:#CIRCUIT_ID#, Bool)</FAILURE>
</UseTemplate>
</Component>
</True>
</Condition>
</Template>
<Template Name="ASOBO_AUTOPILOT_Push_Template">
<Parameters Type="Default">
<ID>1</ID>
</Parameters>
<UseTemplate Name="ASOBO_GT_Helper_Suffix_ID_Appender">
<TEMPLATE_TO_CALL>ASOBO_AUTOPILOT_Push_SubTemplate</TEMPLATE_TO_CALL>
</UseTemplate>
</Template>
<Template Name="ASOBO_AUTOPILOT_Push_SubTemplate">
<Parameters Type="Default">
<Condition Check="NODE_ID">
<True>
<BASE_NODE_ID>#NODE_ID#</BASE_NODE_ID>
</True>
</Condition>
<NODE_ID>AUTOPILOT_Push_#DEFAULT_NAME##SUFFIX_ID#</NODE_ID>
<ANIM_NAME>AUTOPILOT_Push_#DEFAULT_NAME##SUFFIX_ID#</ANIM_NAME>
<PART_ID>AUTOPILOT_Push_#DEFAULT_NAME#</PART_ID>
<WWISE_EVENT_AUTOPILOT_SWITCH_ON>autopilot_switch_on</WWISE_EVENT_AUTOPILOT_SWITCH_ON>
<WWISE_EVENT_AUTOPILOT_SWITCH_OFF>autopilot_switch_off</WWISE_EVENT_AUTOPILOT_SWITCH_OFF>
<WWISE_EVENT_AUTOPILOT_PUSH_BUTTON_ON>autopilot_push_button_on</WWISE_EVENT_AUTOPILOT_PUSH_BUTTON_ON>
<WWISE_EVENT_AUTOPILOT_PUSH_BUTTON_OFF>autopilot_push_button_off</WWISE_EVENT_AUTOPILOT_PUSH_BUTTON_OFF>
<Condition Check="ANIM_CODE">
<AXIS>Y</AXIS>
</Condition>
<INPUT_EVENT_ID_SOURCE>AUTOPILOT</INPUT_EVENT_ID_SOURCE>
<USE_INPUT_EVENT_ID>AUTOPILOT</USE_INPUT_EVENT_ID>
</Parameters>
<Parameters Type="Default">
<Condition NotEmpty="GET_STATE_EXTERNAL">
<True>
<LEFT_SINGLE_CODE>(>B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID#_Toggle)</LEFT_SINGLE_CODE>
<CHECK_STATE_HAS_CHANGED>True</CHECK_STATE_HAS_CHANGED>
</True>
<False>
<LEFT_SINGLE_CODE>(>B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID#_Push)</LEFT_SINGLE_CODE>
<BINDING_INC_0>Push</BINDING_INC_0>
<BINDING_INC_0_PARAM_0>1</BINDING_INC_0_PARAM_0>
</False>
</Condition>
<Condition NotEmpty="EVENT_ID">
<BINDING_INC_0_EVENT_ID>#EVENT_ID#</BINDING_INC_0_EVENT_ID>
</Condition>
<Condition Valid="TOOLTIP_TITLE">
<TOOLTIP_ENTRY_0>#INPUT_EVENT_ID_SOURCE#_#BTN_ID#</TOOLTIP_ENTRY_0>
</Condition>
</Parameters>
<Component ID="#NODE_ID#" Node="#NODE_ID#">
<UseInputEvent ID="#USE_INPUT_EVENT_ID#">
<Condition Check="ANIM_CODE">
<TT_ICON>MOVE_#AXIS#</TT_ICON>
</Condition>
</UseInputEvent>
<Condition Check="ANIM_CODE">
<True>
<UseTemplate Name="ASOBO_GT_Switch_Code">
<WWISE_EVENT_1>#WWISE_EVENT_AUTOPILOT_SWITCH_ON#</WWISE_EVENT_1>
<WWISE_EVENT_2>#WWISE_EVENT_AUTOPILOT_SWITCH_OFF#</WWISE_EVENT_2>
</UseTemplate>
</True>
<False>
<UseTemplate Name="ASOBO_GT_Push_Button">
<WWISE_EVENT_1>#WWISE_EVENT_AUTOPILOT_PUSH_BUTTON_ON#</WWISE_EVENT_1>
<NORMALIZED_TIME_1>0.1</NORMALIZED_TIME_1>
<WWISE_EVENT_2>#WWISE_EVENT_AUTOPILOT_PUSH_BUTTON_OFF#</WWISE_EVENT_2>
<NORMALIZED_TIME_2>0.5</NORMALIZED_TIME_2>
</UseTemplate>
</False>
</Condition>
</Component>
<Condition Valid="NO_INDICATOR">
<False>
<UseTemplate Name="ASOBO_AUTOPILOT_Push_Active_Template"/>
</False>
</Condition>
<Condition Valid="NO_TEXT_EMISSIVE">
<False>
<UseTemplate Name="ASOBO_AUTOPILOT_Push_Emissive_Template"/>
</False>
</Condition>
<Condition Valid="BUTTON_EMISSIVE">
<True>
<UseTemplate Name="ASOBO_LIGHTING_Cabin_Emissive_Template"/>
</True>
</Condition>
<Condition Check="INIT">
<Update Once="True">#INIT#</Update>
</Condition>
</Template>
<!-- ####################### -->
<!-- ##### AP KNOBS ######## -->
<!-- ####################### -->
<!-- ####################### -->
<Template Name="ASOBO_AUTOPILOT_Push_Event_Only_Template">
<Parameters Type="Default">
<EVENT_TYPE>PUSH</EVENT_TYPE>
</Parameters>
<Parameters Type="Override">
<UseParametersFn Name="Compute_First_Available_Bindings">
</UseParametersFn>
</Parameters>
<Parameters Type="Default">
<INPUT_EVENT_ID_SOURCE>AUTOPILOT</INPUT_EVENT_ID_SOURCE>
<USE_INPUT_EVENT_ID>AUTOPILOT</USE_INPUT_EVENT_ID>
<Switch Param="EVENT_TYPE">
<Case Value="PUSH">
<DEFAULT_BINDING_STR>Push</DEFAULT_BINDING_STR>
<TT_INTERACTION>PRIMARY_DOWN+SECONDARY_DOWN</TT_INTERACTION>
<TT_INTERACTION_LOCKABLE>PRIMARY_DOWN</TT_INTERACTION_LOCKABLE>
<ANIM_VAR>_PushAnimVar</ANIM_VAR>
<TT_ICON>Push</TT_ICON>
</Case>
<Case Value="PULL">
<DEFAULT_BINDING_STR>Pull</DEFAULT_BINDING_STR>
<TT_INTERACTION>PRIMARY_DOWN+TERTIARY_DOWN</TT_INTERACTION>
<TT_INTERACTION_LOCKABLE>SECONDARY_DOWN</TT_INTERACTION_LOCKABLE>
<ANIM_VAR>_PullAnimVar</ANIM_VAR>
<TT_ICON>Pull</TT_ICON>
</Case>
</Switch>
</Parameters>
<UseInputEvent ID="#USE_INPUT_EVENT_ID#">
<BINDING_INC_#FIRST_AVAILABLE_INC_BINDING#>#DEFAULT_BINDING_STR#</BINDING_INC_#FIRST_AVAILABLE_INC_BINDING#>
<BINDING_INC_#FIRST_AVAILABLE_INC_BINDING#_PARAM_0>1</BINDING_INC_#FIRST_AVAILABLE_INC_BINDING#_PARAM_0>
<ANIM>HOLD</ANIM>
</UseInputEvent>
</Template>
<Template Name="ASOBO_AUTOPILOT_Knob_Template">
<Parameters Type="Default">
<INPUT_EVENT_ID_SOURCE>AUTOPILOT</INPUT_EVENT_ID_SOURCE>
<USE_INPUT_EVENT_ID>AUTOPILOT</USE_INPUT_EVENT_ID>
<IS_INFINITE>True</IS_INFINITE>
</Parameters>
<Parameters Type="Default">
<Condition Valid="IS_INFINITE">
<True>
<KNOB_TYPE>Infinite</KNOB_TYPE>
</True>
<False>
<KNOB_TYPE>Finite_Code</KNOB_TYPE>
<Condition Valid="USE_BTN_IE">
<BTN_ID>#KNOB_ID#</BTN_ID>
</Condition>
</False>
</Condition>
<Condition Valid="BTN_ID_EXTERNAL">
<True>
<TEMPLATE_VARIANT>_Push</TEMPLATE_VARIANT>
</True>
<False>
<TEMPLATE_VARIANT/>
</False>
</Condition>
<CURSOR_LEFT>TurnLeftSmall</CURSOR_LEFT>
<CURSOR_RIGHT>TurnRightSmall</CURSOR_RIGHT>
</Parameters>
<Parameters Type="Default">
<COUNT>36</COUNT>
<Condition Valid="TOOLTIP_TITLE">
<TOOLTIP_ENTRY_0>#INPUT_EVENT_ID_SOURCE#_#KNOB_ID#</TOOLTIP_ENTRY_0>
<Condition Valid="BTN_ID_EXTERNAL">
<TOOLTIP_ENTRY_1>#INPUT_EVENT_ID_SOURCE#_#BTN_ID_EXTERNAL#</TOOLTIP_ENTRY_1>
</Condition>
</Condition>
</Parameters>
<Parameters Type="Override">
<Condition Valid="BTN_ID_EXTERNAL">
<LEFT_SINGLE_CODE>(>B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID_EXTERNAL#_Push)</LEFT_SINGLE_CODE>
</Condition>
<CLOCKWISE_CODE>1 (>B:#INPUT_EVENT_ID_SOURCE#_#KNOB_ID#_Inc)</CLOCKWISE_CODE>
<ANTICLOCKWISE_CODE>1 (>B:#INPUT_EVENT_ID_SOURCE#_#KNOB_ID#_Dec)</ANTICLOCKWISE_CODE>
</Parameters>
<Parameters Type="Override">
<Condition Valid="USE_BTN_IE">
<True>
<TEMPLATE_TO_CALL>ASOBO_GT_Switch_XStates</TEMPLATE_TO_CALL>
</True>
<False>
<TEMPLATE_TO_CALL>ASOBO_GT_Knob_#KNOB_TYPE##TEMPLATE_VARIANT#</TEMPLATE_TO_CALL>
<ANIM_VAR_HANDLED_SEPARATELY>True</ANIM_VAR_HANDLED_SEPARATELY>
</False>
</Condition>
</Parameters>
<UseInputEvent ID="#USE_INPUT_EVENT_ID#"/>
<UseTemplate Name="#TEMPLATE_TO_CALL#"/>
</Template>
<!-- ####################### -->
<Template Name="ASOBO_AUTOPILOT_Knob_VerticalSpeed_SubTemplate">
<Parameters Type="Default">
<INPUT_EVENT_ID_SOURCE>AUTOPILOT</INPUT_EVENT_ID_SOURCE>
<NODE_ID>AUTOPILOT_Knob_VerticalSpeed#SUFFIX_ID#</NODE_ID>
<ANIM_NAME>AUTOPILOT_Knob_VerticalSpeed#SUFFIX_ID#</ANIM_NAME>
<ANIM_NAME_PUSHPULL>AUTOPILOT_Knob_VerticalSpeed_PushPull#SUFFIX_ID#</ANIM_NAME_PUSHPULL>
<Condition Valid="SEPARATED_INTERACTION">
<HITBOX_UP_NODE_ID>AUTOPILOT_Knob_VerticalSpeed_DN#SUFFIX_ID#</HITBOX_UP_NODE_ID>
<HITBOX_DOWN_NODE_ID>AUTOPILOT_Knob_VerticalSpeed_UP#SUFFIX_ID#</HITBOX_DOWN_NODE_ID>
</Condition>
<PART_ID>AUTOPILOT_Knob_VerticalSpeed</PART_ID>
<WWISE_EVENT>autopilot_verticalspeed_knob</WWISE_EVENT>
<WWISE_EVENT_1>autopilot_knob_push_button_on</WWISE_EVENT_1>
<WWISE_EVENT_2>autopilot_knob_push_button_off</WWISE_EVENT_2>
<COUNT>36</COUNT>
<MAX_PITCH>25</MAX_PITCH>
<Switch>
<Case Check="AIRBUS_TYPE">
<TYPE>AIRBUS</TYPE>
</Case>
<Case Valid="SET_AIRSPEED_ON_FLC">
<TYPE>FLC_AIRSPEED</TYPE>
</Case>
</Switch>
</Parameters>
<Parameters Type="Default">
<Switch Param="TYPE">
<Case Value="AIRBUS">
<CLOCKWISE_DIR>INC</CLOCKWISE_DIR>
<ANTICLOCKWISE_DIR>DEC</ANTICLOCKWISE_DIR>
<MACH_INCREMENT>1</MACH_INCREMENT>
<SPEED_INCREMENT>1</SPEED_INCREMENT>
<VS_INCREMENT>100</VS_INCREMENT>
<VS_INDEX>3</VS_INDEX>
<FORMAT_VS_VALUE>(L:XMLVAR_TRK_FPA_MODE_ACTIVE) if{ l0 60 / near 10 / '%.2f FPA' (F:Format) } els{ l0 '%d ft/min' (F:Format) }</FORMAT_VS_VALUE>
</Case>
<Default>
<VS_INDEX>1</VS_INDEX>
<FORMAT_VS_VALUE>l0 '%d ft/min' @sprintf</FORMAT_VS_VALUE>
<Switch>
<Case Valid="UP_DEC_DN_INC">
<CLOCKWISE_DIR>INC</CLOCKWISE_DIR>
<ANTICLOCKWISE_DIR>DEC</ANTICLOCKWISE_DIR>
<CLOCKWISE_DIR_PITCH>UP</CLOCKWISE_DIR_PITCH>
<ANTICLOCKWISE_DIR_PITCH>DN</ANTICLOCKWISE_DIR_PITCH>
<Condition Check="UP_DEC_DN_INC" Match="INVERT_ANIM">
<INVERT_ANIM>True</INVERT_ANIM>
</Condition>
<MACH_INCREMENT>1</MACH_INCREMENT>
<SPEED_INCREMENT>1</SPEED_INCREMENT>
<VS_INCREMENT>100</VS_INCREMENT>
<PITCH_INCREMENT>0.2</PITCH_INCREMENT>
</Case>
<Default>
<CLOCKWISE_DIR>DEC</CLOCKWISE_DIR>
<ANTICLOCKWISE_DIR>INC</ANTICLOCKWISE_DIR>
<CLOCKWISE_DIR_PITCH>DN</CLOCKWISE_DIR_PITCH>
<ANTICLOCKWISE_DIR_PITCH>UP</ANTICLOCKWISE_DIR_PITCH>
<MACH_INCREMENT>-1</MACH_INCREMENT>
<SPEED_INCREMENT>-1</SPEED_INCREMENT>
<PITCH_INCREMENT>-0.2</PITCH_INCREMENT>
<VS_INCREMENT>100</VS_INCREMENT>
</Default>
</Switch>
</Default>
</Switch>
<SWITCH_DIRECTION>Vertical</SWITCH_DIRECTION>
<THRESHOLD_Y_MOUSE>0.005</THRESHOLD_Y_MOUSE>
</Parameters>
<Parameters Type="Override">
<Condition>
<Test>
<Or>
<Arg Check="HITBOX_UP_NODE_ID"/>
<Arg Check="HITBOX_DOWN_NODE_ID"/>
</Or>
</Test>
<True>
<SEPARATED_INTERACTION>True</SEPARATED_INTERACTION>
</True>
</Condition>
</Parameters>
<Parameters Type="Override">
<Switch Param="TYPE">
<Case Value="FLC_AIRSPEED">
<SET_STATE_EXTERNAL>
1 -1 p0 0 > ? sp0 l0 -1 * sp1
(A:AUTOPILOT FLIGHT LEVEL CHANGE, Bool) if{
(L:XMLVAR_AirSpeedIsInMach) if{
(A:AUTOPILOT MACH HOLD VAR, number) #MACH_INCREMENT# l1 * + 0 max (>K:AP_MACH_VAR_SET)
} els{
(A:AUTOPILOT AIRSPEED HOLD VAR, knot) #SPEED_INCREMENT# l1 * + 0 max (>K:AP_SPD_VAR_SET)
}
} els{
(A:AUTOPILOT VERTICAL HOLD:#VS_INDEX#, Bool) if{
#VS_INDEX# (A:AUTOPILOT VERTICAL HOLD VAR:#VS_INDEX#, feet per minute) #VS_INCREMENT# l0 * + (>K:2:AP_VS_VAR_SET_ENGLISH)
} els{
(A:AUTOPILOT PITCH HOLD, Bool) if{
(A:AUTOPILOT PITCH HOLD REF, degrees) -#PITCH_INCREMENT# l0 * + #MAX_PITCH# / 1 min -1 max 16384 * (>K:AP_PITCH_REF_SET)
}
}
}
</SET_STATE_EXTERNAL>
</Case>
<Case Value="AIRBUS">
<SET_STATE_EXTERNAL>
1 -1 p0 0 > ? sp0
#VS_INDEX# (A:AUTOPILOT VERTICAL HOLD VAR:#VS_INDEX#, feet per minute) #VS_INCREMENT# l0 * + (>K:2:AP_VS_VAR_SET_ENGLISH)
p0 0 > if{ (>H:A320_Neo_FCU_VS_INC) } els{ (>H:A320_Neo_FCU_VS_DEC) }
</SET_STATE_EXTERNAL>
<BTN_ID_PULL>VerticalSpeed_Hold</BTN_ID_PULL>
<PULL_SET_STATE_EXTERNAL>(>H:A320_Neo_FCU_VS_HOLD)</PULL_SET_STATE_EXTERNAL>
<TT_DESCRIPTION_ID_PULL>@TT_Package.AUTOPILOT_KNOB_VERTICALSPEED_ACTION_HOLD</TT_DESCRIPTION_ID_PULL>
<BTN_ID_PUSH>VerticalSpeed_Zero</BTN_ID_PUSH>
<PUSH_SET_STATE_EXTERNAL>(>H:A320_Neo_FCU_VS_ZERO)</PUSH_SET_STATE_EXTERNAL>
<TT_DESCRIPTION_ID_PUSH>@TT_Package.AUTOPILOT_KNOB_VERTICALSPEED_ACTION_ZERO</TT_DESCRIPTION_ID_PUSH>
<ADDITIONAL_EVENT_TYPE>PUSH_PULL</ADDITIONAL_EVENT_TYPE>
</Case>
<Default>
<SET_STATE_EXTERNAL>
1 -1 p0 0 > ? sp0
#VS_INDEX# (A:AUTOPILOT VERTICAL HOLD VAR:#VS_INDEX#, feet per minute) #VS_INCREMENT# l0 * + (>K:2:AP_VS_VAR_SET_ENGLISH)
</SET_STATE_EXTERNAL>
</Default>
</Switch>
<KNOB_ID>VerticalSpeed</KNOB_ID>
</Parameters>
<Switch>
<Case Valid="SEPARATED_INTERACTION">
<Component ID="#NODE_ID#">
<UseTemplate Name="ASOBO_AUTOPILOT_Knob_Template">
<TEMPLATE_VARIANT>_SeparatedInteraction</TEMPLATE_VARIANT>
<TT_DESCRIPTION_ID>@TT_Package.AUTOPILOT_KNOB_VERTICALSPEED_ACTION_SET</TT_DESCRIPTION_ID>
<TOOLTIP_TITLE>@TT_Package.AUTOPILOT_KNOB_VERTICALSPEED_TITLE</TOOLTIP_TITLE>
<GET_TT_VALUE_STATE>(A:AUTOPILOT VERTICAL HOLD VAR:#VS_INDEX#, feet per minute) sp0</GET_TT_VALUE_STATE>
<FORMAT_VALUE>l0 '%d ft/min' @sprintf</FORMAT_VALUE>
<INTERACTION_AXIS>Y</INTERACTION_AXIS>
<TT_ICON>MOVE_AXIS_Y</TT_ICON>
</UseTemplate>
</Component>
</Case>
<Default>
<Component ID="#NODE_ID#" Node="#NODE_ID#">
<Switch Param="ADDITIONAL_EVENT_TYPE">
<Case Value="PUSH_PULL">
<UseTemplate Name="ASOBO_AUTOPILOT_Push_Event_Only_Template">
<BTN_ID>#BTN_ID_PULL#</BTN_ID>
<EVENT_TYPE>PULL</EVENT_TYPE>
<SET_STATE_EXTERNAL>#PULL_SET_STATE_EXTERNAL#</SET_STATE_EXTERNAL>
<TT_DESCRIPTION_ID>#TT_DESCRIPTION_ID_PULL#</TT_DESCRIPTION_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_AUTOPILOT_Push_Event_Only_Template">
<BTN_ID>#BTN_ID_PUSH#</BTN_ID>
<EVENT_TYPE>PUSH</EVENT_TYPE>
<SET_STATE_EXTERNAL>#PUSH_SET_STATE_EXTERNAL#</SET_STATE_EXTERNAL>
<TT_DESCRIPTION_ID>#TT_DESCRIPTION_ID_PUSH#</TT_DESCRIPTION_ID>
</UseTemplate>
</Case>
</Switch>
<UseTemplate Name="ASOBO_AUTOPILOT_Knob_Template">
<Switch Param="ADDITIONAL_EVENT_TYPE">
<Case Value="PUSH_PULL">
<TEMPLATE_VARIANT>_PushPull</TEMPLATE_VARIANT>
<PULL_CODE>(>B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID_PULL#_Pull)</PULL_CODE>
<PUSH_CODE>(>B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID_PUSH#_Push)</PUSH_CODE>
<TOOLTIP_ENTRY_1>#INPUT_EVENT_ID_SOURCE#_#BTN_ID_PULL#</TOOLTIP_ENTRY_1>
<TOOLTIP_ENTRY_2>#INPUT_EVENT_ID_SOURCE#_#BTN_ID_PUSH#</TOOLTIP_ENTRY_2>
<CENTER_RADIUS>0</CENTER_RADIUS>
</Case>
</Switch>
<Condition Check="TYPE" Match="AIRBUS">
<False>
<IS_WHEEL>True</IS_WHEEL>
</False>
</Condition>
<TT_DESCRIPTION_ID>@TT_Package.AUTOPILOT_KNOB_VERTICALSPEED_ACTION_SET</TT_DESCRIPTION_ID>
<TOOLTIP_TITLE>@TT_Package.AUTOPILOT_KNOB_VERTICALSPEED_TITLE</TOOLTIP_TITLE>
<GET_TT_VALUE_STATE>(A:AUTOPILOT VERTICAL HOLD VAR:#VS_INDEX#, feet per minute) sp0</GET_TT_VALUE_STATE>
<FORMAT_VALUE>#FORMAT_VS_VALUE#</FORMAT_VALUE>
</UseTemplate>
</Component>
</Default>
</Switch>
</Template>
<Template Name="ASOBO_AUTOPILOT_Knob_Heading_SubTemplate">
<Parameters Type="Default">
<INPUT_EVENT_ID_SOURCE>AUTOPILOT</INPUT_EVENT_ID_SOURCE>
<ANIM_NAME_KNOB>AUTOPILOT_Knob_Heading#SUFFIX_ID#</ANIM_NAME_KNOB>
<ANIM_NAME_PUSH>AUTOPILOT_Knob_Heading_Push#SUFFIX_ID#</ANIM_NAME_PUSH>
<ANIM_NAME_PUSHPULL>AUTOPILOT_Knob_Heading_PushPull#SUFFIX_ID#</ANIM_NAME_PUSHPULL>
<PART_ID>AUTOPILOT_Knob_Heading</PART_ID>
<NODE_ID>AUTOPILOT_Knob_Heading#SUFFIX_ID#</NODE_ID>
<WWISE_EVENT_1>autopilot_knob_push_button_on</WWISE_EVENT_1>
<NORMALIZED_TIME_1>0.1</NORMALIZED_TIME_1>
<WWISE_EVENT_2>autopilot_knob_push_button_off</WWISE_EVENT_2>
<NORMALIZED_TIME_2>0.5</NORMALIZED_TIME_2>
<WWISE_EVENT>autopilot_heading_knob</WWISE_EVENT>
<COUNT>36</COUNT>
<THRESHOLD_X_INPUT>0.01</THRESHOLD_X_INPUT>
<THRESHOLD_X_MOUSE>0.001</THRESHOLD_X_MOUSE>
<THRESHOLD_INPUT>0.01</THRESHOLD_INPUT>
<THRESHOLD_MOUSE>0.001</THRESHOLD_MOUSE>
<Condition Check="PUSH">
<TYPE>PUSH</TYPE>
</Condition>
<Switch Param="TYPE">
<Case Value="AIRBUS">
<HEADING_INDEX>3</HEADING_INDEX>
</Case>
<Default>
<HEADING_INDEX>1</HEADING_INDEX>
</Default>
</Switch>
</Parameters>
<Parameters Type="Override">
<KNOB_ID>Heading</KNOB_ID>
<Switch Param="TYPE">
<Case Value="PUSH">
<SET_STATE_EXTERNAL>1 -1 p0 0 > ? sp0 #HEADING_INDEX# (A:AUTOPILOT HEADING LOCK DIR:#HEADING_INDEX#, degrees) 1 l0 * + dnor (>K:2:HEADING_BUG_SET)</SET_STATE_EXTERNAL>
<ADDITIONAL_EVENT_TYPE>PUSH</ADDITIONAL_EVENT_TYPE>
<BTN_ID_EXTERNAL>Heading_Sync</BTN_ID_EXTERNAL>
<BTN_SET_STATE_EXTERNAL>(A:HEADING INDICATOR, degrees) (>K:HEADING_BUG_SET)</BTN_SET_STATE_EXTERNAL>
<TT_DESCRIPTION_ID_BTN>@TT_Package.AUTOPILOT_KNOB_HEADING_ACTION_SET_PUSH</TT_DESCRIPTION_ID_BTN>
</Case>
<Case Value="AIRBUS">
<SET_STATE_EXTERNAL>
1 -1 p0 0 > ? sp0
#HEADING_INDEX# (A:AUTOPILOT HEADING LOCK DIR:#HEADING_INDEX#, degrees) 1 l0 * + dnor (>K:2:HEADING_BUG_SET)
p0 0 > if{ (>H:A320_Neo_CDU_AP_INC_HEADING) } els{ (>H:A320_Neo_CDU_AP_DEC_HEADING) }
</SET_STATE_EXTERNAL>
<ADDITIONAL_EVENT_TYPE>PUSH_PULL</ADDITIONAL_EVENT_TYPE>
<BTN_ID_PULL>Heading_Selected</BTN_ID_PULL>
<BTN_ID_PUSH>Heading_Managed</BTN_ID_PUSH>
<DEFAULT_BINDING_STR>Select</DEFAULT_BINDING_STR>
<PULL_SET_STATE_EXTERNAL>(>H:A320_Neo_CDU_MODE_SELECTED_HEADING)</PULL_SET_STATE_EXTERNAL>
<PUSH_SET_STATE_EXTERNAL>(>H:A320_Neo_CDU_MODE_MANAGED_HEADING)</PUSH_SET_STATE_EXTERNAL>
<TT_DESCRIPTION_ID_PULL>@TT_Package.AUTOPILOT_KNOB_HEADING_ACTION_SLT</TT_DESCRIPTION_ID_PULL>
<TT_DESCRIPTION_ID_PUSH>@TT_Package.AUTOPILOT_KNOB_HEADING_ACTION_MAN</TT_DESCRIPTION_ID_PUSH>
</Case>
<Case Value="B747">
<SET_STATE_EXTERNAL>1 -1 p0 0 > ? sp0 #HEADING_INDEX# (A:AUTOPILOT HEADING LOCK DIR:#HEADING_INDEX#, degrees) 1 l0 * + dnor (>K:2:HEADING_BUG_SET)</SET_STATE_EXTERNAL>
<ADDITIONAL_EVENT_TYPE>PUSH</ADDITIONAL_EVENT_TYPE>
<BTN_ID_EXTERNAL>Heading_Sync</BTN_ID_EXTERNAL>
<BTN_SET_STATE_EXTERNAL>(>H:B747_8_FMC_1_AP_HEADING_SEL)</BTN_SET_STATE_EXTERNAL>
<TT_DESCRIPTION_ID_BTN>@TT_Package.AUTOPILOT_KNOB_HEADING_ACTION_SET_PUSH</TT_DESCRIPTION_ID_BTN>
</Case>
<Case Value="AS01B">
<SET_STATE_EXTERNAL>1 -1 p0 0 > ? sp0 #HEADING_INDEX# (A:AUTOPILOT HEADING LOCK DIR:#HEADING_INDEX#, degrees) 1 l0 * + dnor (>K:2:HEADING_BUG_SET)</SET_STATE_EXTERNAL>
<ADDITIONAL_EVENT_TYPE>PUSH</ADDITIONAL_EVENT_TYPE>
<BTN_ID_EXTERNAL>Heading_Sync</BTN_ID_EXTERNAL>
<BTN_SET_STATE_EXTERNAL>(>H:AS01B_FMC_1_AP_HEADING_SEL)</BTN_SET_STATE_EXTERNAL>
<TT_DESCRIPTION_ID_BTN>@TT_Package.AUTOPILOT_KNOB_HEADING_ACTION_SET_PUSH</TT_DESCRIPTION_ID_BTN>
</Case>
<Default>
<ANIM_NAME>#ANIM_NAME_KNOB#</ANIM_NAME>
<SET_STATE_EXTERNAL>1 -1 p0 0 > ? sp0 #HEADING_INDEX# (A:AUTOPILOT HEADING LOCK DIR:#HEADING_INDEX#, degrees) 1 l0 * + dnor (>K:2:HEADING_BUG_SET)</SET_STATE_EXTERNAL>
</Default>
</Switch>
</Parameters>
<Component ID="#NODE_ID#" Node="#NODE_ID#">
<Switch Param="ADDITIONAL_EVENT_TYPE">
<Case Value="PUSH_PULL">
<UseTemplate Name="ASOBO_AUTOPILOT_Push_Event_Only_Template">
<BTN_ID>#BTN_ID_PULL#</BTN_ID>
<EVENT_TYPE>PULL</EVENT_TYPE>
<SET_STATE_EXTERNAL>#PULL_SET_STATE_EXTERNAL#</SET_STATE_EXTERNAL>
<TT_DESCRIPTION_ID>#TT_DESCRIPTION_ID_PULL#</TT_DESCRIPTION_ID>
<Condition Valid="TT_DESCRIPTION_ID_PULL_IS_DYNAMIC">
<TT_DESCRIPTION_IS_DYNAMIC>#TT_DESCRIPTION_ID_PULL_IS_DYNAMIC#</TT_DESCRIPTION_IS_DYNAMIC>
</Condition>
</UseTemplate>
<UseTemplate Name="ASOBO_AUTOPILOT_Push_Event_Only_Template">
<BTN_ID>#BTN_ID_PUSH#</BTN_ID>
<EVENT_TYPE>PUSH</EVENT_TYPE>
<SET_STATE_EXTERNAL>#PUSH_SET_STATE_EXTERNAL#</SET_STATE_EXTERNAL>
<TT_DESCRIPTION_ID>#TT_DESCRIPTION_ID_PUSH#</TT_DESCRIPTION_ID>
<Condition Valid="TT_DESCRIPTION_ID_PUSH_IS_DYNAMIC">
<TT_DESCRIPTION_IS_DYNAMIC>#TT_DESCRIPTION_ID_PUSH_IS_DYNAMIC#</TT_DESCRIPTION_IS_DYNAMIC>
</Condition>
</UseTemplate>
</Case>
<Case Value="PUSH">
<UseTemplate Name="ASOBO_AUTOPILOT_Push_Event_Only_Template">
<BTN_ID>#BTN_ID_EXTERNAL#</BTN_ID>
<EVENT_TYPE>PUSH</EVENT_TYPE>
<SET_STATE_EXTERNAL>#BTN_SET_STATE_EXTERNAL#</SET_STATE_EXTERNAL>
<TT_DESCRIPTION_ID>#TT_DESCRIPTION_ID_BTN#</TT_DESCRIPTION_ID>
</UseTemplate>
</Case>
</Switch>
<UseTemplate Name="ASOBO_AUTOPILOT_Knob_Template">
<TT_DESCRIPTION_ID>@TT_Package.AUTOPILOT_KNOB_HEADING_ACTION_SET_ADJUST</TT_DESCRIPTION_ID>
<TOOLTIP_TITLE>@TT_Package.AUTOPILOT_KNOB_HEADING_TITLE</TOOLTIP_TITLE>
<GET_TT_VALUE_STATE>(A:AUTOPILOT HEADING LOCK DIR:#HEADING_INDEX#, degrees) sp0</GET_TT_VALUE_STATE>
<FORMAT_VALUE>l0 '%d°' @sprintf</FORMAT_VALUE>
<Switch Param="ADDITIONAL_EVENT_TYPE">
<Case Value="PUSH_PULL">
<TEMPLATE_VARIANT>_PushPull</TEMPLATE_VARIANT>
<PULL_CODE>(>B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID_PULL#_#DEFAULT_BINDING_STR#)</PULL_CODE>
<PUSH_CODE>(>B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID_PUSH#_#DEFAULT_BINDING_STR#)</PUSH_CODE>
<TOOLTIP_ENTRY_1>#INPUT_EVENT_ID_SOURCE#_#BTN_ID_PULL#</TOOLTIP_ENTRY_1>
<TOOLTIP_ENTRY_2>#INPUT_EVENT_ID_SOURCE#_#BTN_ID_PUSH#</TOOLTIP_ENTRY_2>
</Case>
</Switch>
</UseTemplate>
</Component>
</Template>
<Template Name="ASOBO_AUTOPILOT_Knob_Altitude_SubTemplate">
<Parameters Type="Override">
<Condition Check="PUSH">
<TYPE>PUSH</TYPE>
</Condition>
</Parameters>
<Parameters Type="Default">
<INPUT_EVENT_ID_SOURCE>AUTOPILOT</INPUT_EVENT_ID_SOURCE>
<PART_ID>AUTOPILOT_Knob_Altitude</PART_ID>
<Condition Check="INCREMENT">
<True>
<NODE_ID>AUTOPILOT_Knob_Altitude_#INCREMENT##SUFFIX_ID#</NODE_ID>
<ANIM_NAME>AUTOPILOT_Knob_Altitude_#INCREMENT##SUFFIX_ID#</ANIM_NAME>
<Condition Check="TYPE" Match="PUSH">
<ANIM_NAME_KNOB>AUTOPILOT_Knob_Altitude_#INCREMENT##SUFFIX_ID#</ANIM_NAME_KNOB>
<ANIM_NAME_PUSH>AUTOPILOT_Knob_Altitude_#INCREMENT#_Push#SUFFIX_ID#</ANIM_NAME_PUSH>
</Condition>
<WWISE_EVENT>autopilot_altitude_#INCREMENT#_knob</WWISE_EVENT>
<COUNT>36</COUNT>
<THRESHOLD_INPUT>0.0001</THRESHOLD_INPUT>
<THRESHOLD_MOUSE>0.003</THRESHOLD_MOUSE>
<INCREMENT_IN_KNOB_ID/>
</True>
<False>
<Condition>
<Test>
<Or>
<Arg Check="TYPE" Match="AIRBUS"/>
<Arg Check="TYPE" Match="AS01B"/>
</Or>
</Test>
<False>
<IS_DYN_INCREMENT>True</IS_DYN_INCREMENT>
</False>
</Condition>
<Condition Check="INCREMENT">
<False>
<INCREMENT_VAR>XMLVAR_Autopilot_Altitude_Increment</INCREMENT_VAR>
</False>
</Condition>
<INCREMENT>(L:XMLVAR_Autopilot_Altitude_Increment)</INCREMENT>
<SET_INCREMENT>(>L:XMLVAR_Autopilot_Altitude_Increment)</SET_INCREMENT>
<DYN_INCREMENT_INIT>100</DYN_INCREMENT_INIT>
<NODE_ID>AUTOPILOT_Knob_Altitude#SUFFIX_ID#</NODE_ID>
<ANIM_NAME>AUTOPILOT_Knob_Altitude#SUFFIX_ID#</ANIM_NAME>
<WWISE_EVENT>autopilot_altitude_knob</WWISE_EVENT>
<COUNT>36</COUNT>
<THRESHOLD_X_INPUT>0.05</THRESHOLD_X_INPUT>
<THRESHOLD_X_MOUSE>0.01</THRESHOLD_X_MOUSE>
<Switch Param="TYPE">
<Case Value="AIRBUS">
<ANIM_NAME_PUSHPULL>AUTOPILOT_Knob_Altitude_PushPull#SUFFIX_ID#</ANIM_NAME_PUSHPULL>
</Case>
<Case Value="PUSH">
<ANIM_NAME_KNOB>AUTOPILOT_Knob_Altitude#SUFFIX_ID#</ANIM_NAME_KNOB>
<ANIM_NAME_PUSH>AUTOPILOT_Knob_Altitude_Push#SUFFIX_ID#</ANIM_NAME_PUSH>
<ALT_PUSH_TYPE>ALT_SYNC</ALT_PUSH_TYPE>
</Case>
</Switch>
</False>
</Condition>
<Switch Param="TYPE">
<Case Value="AIRBUS">
<HEADING_INDEX>3</HEADING_INDEX>
</Case>
<Case Value="B747">
<HEADING_INDEX>3</HEADING_INDEX>
</Case>
<Case Value="AS01B">
<HEADING_INDEX>3</HEADING_INDEX>
</Case>
<Default>
<HEADING_INDEX>0</HEADING_INDEX>
</Default>
</Switch>
<WWISE_EVENT_1>autopilot_knob_push_button_on</WWISE_EVENT_1>
<NORMALIZED_TIME_1>0.1</NORMALIZED_TIME_1>
<WWISE_EVENT_2>autopilot_knob_push_button_off</WWISE_EVENT_2>
<NORMALIZED_TIME_2>0.3</NORMALIZED_TIME_2>
<Switch Param="ALT_PUSH_TYPE">
<Case Value="ALT_FINE_TUNE">
<FINE_TUNE_INCREMENT>100</FINE_TUNE_INCREMENT>
</Case>
</Switch>
</Parameters>
<Parameters Type="Override">
<Condition Check="INCREMENT_IN_KNOB_ID">
<True>
<KNOB_ID>Altitude_#INCREMENT#</KNOB_ID>
</True>
<False>
<KNOB_ID>Altitude</KNOB_ID>
</False>
</Condition>
<Switch Param="TYPE">
<Case Value="PUSH">
<SET_STATE_EXTERNAL>
1 -1 p0 0 > ? sp0
#HEADING_INDEX# (A:AUTOPILOT ALTITUDE LOCK VAR:#HEADING_INDEX#, feet) #INCREMENT# l0 * + (>K:2:AP_ALT_VAR_SET_ENGLISH)
p0 0 > if{ (>H:AP_KNOB_Up) } els{ (>H:AP_KNOB_Down) }
</SET_STATE_EXTERNAL>
<ADDITIONAL_EVENT_TYPE>PUSH</ADDITIONAL_EVENT_TYPE>
<Switch Param="ALT_PUSH_TYPE">
<Case Value="ALT_SYNC">
<BTN_ID_EXTERNAL>Altitude_Sync</BTN_ID_EXTERNAL>
<BTN_SET_STATE_EXTERNAL>(A:INDICATED ALTITUDE, feet) (>K:AP_ALT_VAR_SET_ENGLISH) (>H:AP_KNOB)</BTN_SET_STATE_EXTERNAL>
<TT_DESCRIPTION_ID_BTN>@TT_Package.AUTOPILOT_KNOB_ALTITUDESELECTED_ACTION_PUSH</TT_DESCRIPTION_ID_BTN>
</Case>
<Case Value="ALT_FINE_TUNE">
<BTN_ID_EXTERNAL>Altitude_Fine_Tune</BTN_ID_EXTERNAL>
<BTN_SET_STATE_EXTERNAL>#FINE_TUNE_INCREMENT# #DYN_INCREMENT_INIT# #INCREMENT# #FINE_TUNE_INCREMENT# != ? #SET_INCREMENT#</BTN_SET_STATE_EXTERNAL>
<TT_DESCRIPTION_ID_BTN>@TT_Package.AUTOPILOT_KNOB_ALTITUDE_INCREMENT_ACTION</TT_DESCRIPTION_ID_BTN>
<PUSH_ANIM_HANDLED_SEPARATELY>True</PUSH_ANIM_HANDLED_SEPARATELY>
<BTN_ANIM_CODE>#INCREMENT# #FINE_TUNE_INCREMENT# == 100 *</BTN_ANIM_CODE>
<BTN_LOCAL_VAR_TO_WATCH_0>#INCREMENT_VAR#</BTN_LOCAL_VAR_TO_WATCH_0>
<BTN_VALUE_CODE>#INCREMENT# #FINE_TUNE_INCREMENT# ==</BTN_VALUE_CODE>
<BTN_TT_VALUE_ON>'100'</BTN_TT_VALUE_ON>
<BTN_TT_VALUE_OFF>'1000'</BTN_TT_VALUE_OFF>
</Case>
</Switch>
</Case>
<Case Value="AIRBUS">
<SET_STATE_EXTERNAL>
1 -1 p0 0 > ? sp0
#HEADING_INDEX# (A:AUTOPILOT ALTITUDE LOCK VAR:#HEADING_INDEX#, feet) #INCREMENT# l0 * + (>K:2:AP_ALT_VAR_SET_ENGLISH)
p0 0 > if{ (>H:AP_KNOB_Up) (>H:A320_Neo_CDU_AP_INC_ALT) } els{ (>H:AP_KNOB_Down) (>H:A320_Neo_CDU_AP_DEC_ALT) }
</SET_STATE_EXTERNAL>
<ADDITIONAL_EVENT_TYPE>PUSH_PULL</ADDITIONAL_EVENT_TYPE>
<BTN_ID_PULL>Altitude_Selected</BTN_ID_PULL>
<BTN_ID_PUSH>Altitude_Managed</BTN_ID_PUSH>
<DEFAULT_BINDING_STR>Mode</DEFAULT_BINDING_STR>
<PULL_SET_STATE_EXTERNAL>(>H:A320_Neo_CDU_MODE_SELECTED_ALTITUDE)</PULL_SET_STATE_EXTERNAL>
<PUSH_SET_STATE_EXTERNAL>(>H:A320_Neo_CDU_MODE_MANAGED_ALTITUDE)</PUSH_SET_STATE_EXTERNAL>
<TT_DESCRIPTION_ID_PULL>@TT_Package.AUTOPILOT_PUSH_ALTITUDE_ACTION_SLT</TT_DESCRIPTION_ID_PULL>
<TT_DESCRIPTION_ID_PUSH>@TT_Package.AUTOPILOT_PUSH_ALTITUDE_ACTION_MAN</TT_DESCRIPTION_ID_PUSH>
</Case>
<Case Value="B747">
<SET_STATE_EXTERNAL>p0 0 > if{ #HEADING_INDEX# 0 (>K:2:AP_ALT_VAR_INC) (>H:AP_KNOB_Up) } els{ #HEADING_INDEX# 0 (>K:2:AP_ALT_VAR_DEC) (>H:AP_KNOB_Down) }</SET_STATE_EXTERNAL>
<ADDITIONAL_EVENT_TYPE>PUSH</ADDITIONAL_EVENT_TYPE>
<BTN_ID_EXTERNAL>Altitude_Sync</BTN_ID_EXTERNAL>
<BTN_SET_STATE_EXTERNAL>(>H:B747_8_FMC_1_AP_ALT_INTERVENTION)</BTN_SET_STATE_EXTERNAL>
<TT_DESCRIPTION_ID_BTN>@TT_Package.AUTOPILOT_KNOB_ALTITUDESELECTED_ACTION_PUSH</TT_DESCRIPTION_ID_BTN>
</Case>
<Case Value="AS01B">
<SET_STATE_EXTERNAL>
1 -1 p0 0 > ? sp0
#HEADING_INDEX# (A:AUTOPILOT ALTITUDE LOCK VAR:#HEADING_INDEX#, feet) #INCREMENT# l0 * + (>K:2:AP_ALT_VAR_SET_ENGLISH)
p0 0 > if{ (>H:AP_KNOB_Up) } els{ (>H:AP_KNOB_Down) }
</SET_STATE_EXTERNAL>
<ADDITIONAL_EVENT_TYPE>PUSH</ADDITIONAL_EVENT_TYPE>
<BTN_ID_EXTERNAL>Altitude_Sync</BTN_ID_EXTERNAL>
<BTN_SET_STATE_EXTERNAL>(>H:AS01B_FMC_1_AP_ALT_INTERVENTION)</BTN_SET_STATE_EXTERNAL>
<TT_DESCRIPTION_ID_BTN>@TT_Package.AUTOPILOT_KNOB_ALTITUDESELECTED_ACTION_PUSH</TT_DESCRIPTION_ID_BTN>
</Case>
<Default>
<SET_STATE_EXTERNAL>
1 -1 p0 0 > ? sp0
#HEADING_INDEX# (A:AUTOPILOT ALTITUDE LOCK VAR:#HEADING_INDEX#, feet) #INCREMENT# l0 * + (>K:2:AP_ALT_VAR_SET_ENGLISH)
p0 0 > if{ (>H:AP_KNOB_Up) } els{ (>H:AP_KNOB_Down) }
</SET_STATE_EXTERNAL>
</Default>
</Switch>
</Parameters>
<Component ID="#NODE_ID#" Node="#NODE_ID#">
<Condition Valid="IS_DYN_INCREMENT">
<UseTemplate Name="ASOBO_GT_Update">
<UPDATE_ONCE>True</UPDATE_ONCE>
<UPDATE_CODE>#DYN_INCREMENT_INIT# #SET_INCREMENT#</UPDATE_CODE>
</UseTemplate>
</Condition>
<Switch Param="ADDITIONAL_EVENT_TYPE">
<Case Value="PUSH_PULL">
<UseTemplate Name="ASOBO_AUTOPILOT_Push_Event_Only_Template">
<BTN_ID>#BTN_ID_PULL#</BTN_ID>
<EVENT_TYPE>PULL</EVENT_TYPE>
<SET_STATE_EXTERNAL>#PULL_SET_STATE_EXTERNAL#</SET_STATE_EXTERNAL>
<TT_DESCRIPTION_ID>#TT_DESCRIPTION_ID_PULL#</TT_DESCRIPTION_ID>
<Condition Valid="TT_DESCRIPTION_ID_PULL_IS_DYNAMIC">
<TT_DESCRIPTION_IS_DYNAMIC>#TT_DESCRIPTION_ID_PULL_IS_DYNAMIC#</TT_DESCRIPTION_IS_DYNAMIC>
</Condition>
</UseTemplate>
<UseTemplate Name="ASOBO_AUTOPILOT_Push_Event_Only_Template">
<BTN_ID>#BTN_ID_PUSH#</BTN_ID>
<EVENT_TYPE>PUSH</EVENT_TYPE>
<SET_STATE_EXTERNAL>#PUSH_SET_STATE_EXTERNAL#</SET_STATE_EXTERNAL>
<TT_DESCRIPTION_ID>#TT_DESCRIPTION_ID_PUSH#</TT_DESCRIPTION_ID>
<Condition Valid="TT_DESCRIPTION_ID_PUSH_IS_DYNAMIC">
<TT_DESCRIPTION_IS_DYNAMIC>#TT_DESCRIPTION_ID_PUSH_IS_DYNAMIC#</TT_DESCRIPTION_IS_DYNAMIC>
</Condition>
</UseTemplate>
</Case>
<Case Value="PUSH">
<UseTemplate Name="ASOBO_AUTOPILOT_Push_Event_Only_Template">
<BTN_ID>#BTN_ID_EXTERNAL#</BTN_ID>
<EVENT_TYPE>PUSH</EVENT_TYPE>
<SET_STATE_EXTERNAL>#BTN_SET_STATE_EXTERNAL#</SET_STATE_EXTERNAL>
<TT_DESCRIPTION_ID>#TT_DESCRIPTION_ID_BTN#</TT_DESCRIPTION_ID>
<Condition NotEmpty="BTN_VALUE_CODE">
<VALUE_CODE>#BTN_VALUE_CODE#</VALUE_CODE>
<TT_VALUE>#BTN_VALUE_CODE# if{ #BTN_TT_VALUE_ON# } els{ #BTN_TT_VALUE_OFF# }</TT_VALUE>
<TT_VALUE_IS_DYNAMIC>True</TT_VALUE_IS_DYNAMIC>
</Condition>
<Condition NotEmpty="BTN_LOCAL_VAR_TO_WATCH_0">
<LOCAL_VAR_TO_WATCH_0>#BTN_LOCAL_VAR_TO_WATCH_0#</LOCAL_VAR_TO_WATCH_0>
</Condition>
</UseTemplate>
<Condition NotEmpty="PUSH_ANIM_HANDLED_SEPARATELY">
<UseTemplate Name="ASOBO_GT_Anim_Code">
<ANIM_CODE>#BTN_ANIM_CODE#</ANIM_CODE>
<ANIM_NAME>#ANIM_NAME_PUSH#</ANIM_NAME>
<ANIM_LAG>100</ANIM_LAG>
</UseTemplate>
</Condition>
</Case>
</Switch>
<UseTemplate Name="ASOBO_AUTOPILOT_Knob_Template">
<BINDING_INC_0>Inc_Event</BINDING_INC_0>
<BINDING_INC_0_PARAM_0>1</BINDING_INC_0_PARAM_0>
<BINDING_INC_0_EVENT_ID>AP_ALT_VAR_INC</BINDING_INC_0_EVENT_ID>
<BINDING_INC_0_EVENT_ID_ONLY>True</BINDING_INC_0_EVENT_ID_ONLY>
<BINDING_DEC_0>Dec_Event</BINDING_DEC_0>
<BINDING_DEC_0_PARAM_0>1</BINDING_DEC_0_PARAM_0>
<BINDING_DEC_0_EVENT_ID>AP_ALT_VAR_DEC</BINDING_DEC_0_EVENT_ID>
<BINDING_DEC_0_EVENT_ID_ONLY>True</BINDING_DEC_0_EVENT_ID_ONLY>
<TT_DESCRIPTION_ID>@TT_Package.AUTOPILOT_KNOB_ALTITUDESELECTED_ACTION_ADJUST</TT_DESCRIPTION_ID>
<TOOLTIP_TITLE>@TT_Package.AUTOPILOT_KNOB_ALTITUDESELECTED_TITLE</TOOLTIP_TITLE>
<GET_TT_VALUE_STATE>(A:AUTOPILOT ALTITUDE LOCK VAR:#HEADING_INDEX#, feet) sp0</GET_TT_VALUE_STATE>
<FORMAT_VALUE>l0 '%d ft' @sprintf</FORMAT_VALUE>
<Switch Param="ADDITIONAL_EVENT_TYPE">
<Case Value="PUSH_PULL">
<TEMPLATE_VARIANT>_PushPull</TEMPLATE_VARIANT>
<PULL_CODE>(>B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID_PULL#_#DEFAULT_BINDING_STR#)</PULL_CODE>
<PUSH_CODE>(>B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID_PUSH#_#DEFAULT_BINDING_STR#)</PUSH_CODE>
<TOOLTIP_ENTRY_1>#INPUT_EVENT_ID_SOURCE#_#BTN_ID_PULL#</TOOLTIP_ENTRY_1>
<TOOLTIP_ENTRY_2>#INPUT_EVENT_ID_SOURCE#_#BTN_ID_PUSH#</TOOLTIP_ENTRY_2>
</Case>
</Switch>
</UseTemplate>
<Condition Check="EMISSIVE_KNOB">
<UseTemplate Name="ASOBO_GT_Emissive_Gauge"/>
</Condition>
</Component>
</Template>
<Template Name="ASOBO_AUTOPILOT_Knob_Course_SubTemplate">
<Parameters Type="Override">
<Condition Check="PUSH">
<TYPE>PUSH</TYPE>
</Condition>
</Parameters>
<Parameters Type="Default">
<ANIM_NAME>AUTOPILOT_Knob_Course_#ID##SUFFIX_ID#</ANIM_NAME>
<Condition Check="TYPE" Match="PUSH">
<ANIM_NAME_PUSH>AUTOPILOT_Knob_Course_#ID#_push#SUFFIX_ID#</ANIM_NAME_PUSH>
</Condition>
<NODE_ID>AUTOPILOT_Knob_Course_#ID##SUFFIX_ID#</NODE_ID>
<PART_ID>AUTOPILOT_Knob_Course</PART_ID>
<COUNT>72</COUNT>
<Condition Valid="DYNAMIC_VOR_ID">
<VOR_ID_1_SELECTED_CHECK>1</VOR_ID_1_SELECTED_CHECK>
<ID_1>#ID#</ID_1>
<ID_2>#ID#</ID_2>
</Condition>
<THRESHOLD_X_INPUT>0.01</THRESHOLD_X_INPUT>
<THRESHOLD_X_MOUSE>0.002</THRESHOLD_X_MOUSE>
<THRESHOLD_INPUT>0.01</THRESHOLD_INPUT>
<THRESHOLD_MOUSE>0.002</THRESHOLD_MOUSE>
<WWISE_EVENT>autopilot_knob_turn</WWISE_EVENT>
<WWISE_EVENT_1>autopilot_knob_push_button_on</WWISE_EVENT_1>
<WWISE_EVENT_2>autopilot_knob_push_button_off</WWISE_EVENT_2>
<SYNC_VAR>(A:HEADING INDICATOR, degrees)</SYNC_VAR>
<INCREMENT>1</INCREMENT>
</Parameters>
<Parameters Type="Override">
<Condition Valid="DYNAMIC_VOR_ID">
<True>
<KNOB_ID>Course_Dyn_#ID#</KNOB_ID>
</True>
<False>
<KNOB_ID>Course_#ID#</KNOB_ID>
</False>
</Condition>
<Switch Param="TYPE">
<Case Value="PUSH">
<ANIM_NAME_KNOB>#ANIM_NAME#</ANIM_NAME_KNOB>
<TT_DESCRIPTION_ID_BTN>@TT_Package.AUTOPILOT_KNOB_COURSE_ACTION_PUSH</TT_DESCRIPTION_ID_BTN>
<ADDITIONAL_EVENT_TYPE>PUSH</ADDITIONAL_EVENT_TYPE>
<Condition Valid="DYNAMIC_VOR_ID">
<True>
<BTN_ID_EXTERNAL>Course_Dyn_#ID#_Sync</BTN_ID_EXTERNAL>
<BTN_SET_STATE_EXTERNAL>#SYNC_VAR# sp0 #VOR_ID_1_SELECTED_CHECK# if{ l0 (>K:VOR#ID_1#_SET) } els{ l0 (>K:VOR#ID_2#_SET) }</BTN_SET_STATE_EXTERNAL>
</True>
<False>
<BTN_ID_EXTERNAL>Course_#ID#_Sync</BTN_ID_EXTERNAL>
<BTN_SET_STATE_EXTERNAL>#SYNC_VAR# (>K:VOR#ID#_SET)</BTN_SET_STATE_EXTERNAL>
</False>
</Condition>
</Case>
</Switch>
<Condition Valid="DYNAMIC_VOR_ID">
<True>
<SET_STATE_EXTERNAL>1 -1 p0 0 > ? sp0 #VOR_ID_1_SELECTED_CHECK# if{ (A:NAV OBS:#ID_1#, degree) #INCREMENT# l0 * + dnor (>K:VOR#ID_1#_SET) } els{ (A:NAV OBS:#ID_2#, degree) #INCREMENT# l0 * + dnor (>K:VOR#ID_2#_SET) }</SET_STATE_EXTERNAL>
<GET_COURSE>(A:NAV OBS:#ID_1#, degree) (A:NAV OBS:#ID_2#, degree) #VOR_ID_1_SELECTED_CHECK# ?</GET_COURSE>
</True>
<False>
<SET_STATE_EXTERNAL>1 -1 p0 0 > ? sp0 (A:NAV OBS:#ID#, degree) #INCREMENT# l0 * + dnor (>K:VOR#ID#_SET)</SET_STATE_EXTERNAL>
<GET_COURSE>(A:NAV OBS:#ID#, degree)</GET_COURSE>
</False>
</Condition>
</Parameters>
<Component ID="#NODE_ID#" Node="#NODE_ID#">
<Switch Param="ADDITIONAL_EVENT_TYPE">
<Case Value="PUSH">
<UseTemplate Name="ASOBO_AUTOPILOT_Push_Event_Only_Template">
<BTN_ID>#BTN_ID_EXTERNAL#</BTN_ID>
<EVENT_TYPE>PUSH</EVENT_TYPE>
<SET_STATE_EXTERNAL>#BTN_SET_STATE_EXTERNAL#</SET_STATE_EXTERNAL>
<TT_DESCRIPTION_ID>#TT_DESCRIPTION_ID_BTN#</TT_DESCRIPTION_ID>
</UseTemplate>
</Case>
</Switch>
<UseTemplate Name="ASOBO_AUTOPILOT_Knob_Template">
<TT_DESCRIPTION_ID>@TT_Package.AUTOPILOT_KNOB_COURSE_ACTION_ADJUST</TT_DESCRIPTION_ID>
<TOOLTIP_TITLE>@TT_Package.AUTOPILOT_KNOB_COURSE_TITLE</TOOLTIP_TITLE>
<Condition NotEmpty="DYN_VOR_FORMAT_VALUE_OVERRIDE">
<True>
<FORMAT_VALUE>#DYN_VOR_FORMAT_VALUE_OVERRIDE#</FORMAT_VALUE>
</True>
<False>
<FORMAT_VALUE>l0 '%d°' @sprintf</FORMAT_VALUE>
</False>
</Condition>
<GET_TT_VALUE_STATE>#GET_COURSE# sp0</GET_TT_VALUE_STATE>
</UseTemplate>
</Component>
</Template>
<Template Name="ASOBO_AUTOPILOT_Push_STD_SubTemplate">
<Parameters Type="Default">
<BARO_ID>#ID#</BARO_ID>
</Parameters>
<Parameters Type="Default">
<NODE_ID>AUTOPILOT_Push_STD#SUFFIX_ID#</NODE_ID>
<ANIM_NAME>AUTOPILOT_Push_STD#SUFFIX_ID#</ANIM_NAME>
<IE_NAME>AUTOPILOT_Push_STD#SUFFIX_ID#</IE_NAME>
</Parameters>
<UseTemplate Name="ASOBO_AUTOPILOT_Base_Template">
<SET_STATE_EXTERNAL>
(L:XMLVAR_Baro#BARO_ID#_ForcedToSTD) ! (>L:XMLVAR_Baro#BARO_ID#_ForcedToSTD)
(L:XMLVAR_Baro#BARO_ID#_ForcedToSTD) if{
(A:KOHLSMAN SETTING MB:#BARO_ID#, mbars) 16 * (>L:XMLVAR_Baro#BARO_ID#_SavedPressure)
#BARO_ID# (>K:BAROMETRIC_STD_PRESSURE)
} els{
#BARO_ID# (L:XMLVAR_Baro#BARO_ID#_SavedPressure) (>K:2:KOHLSMAN_SET)
}
</SET_STATE_EXTERNAL>
<GET_STATE_EXTERNAL>(L:XMLVAR_Baro#BARO_ID#_ForcedToSTD) sp0</GET_STATE_EXTERNAL>
<TOOLTIP_TITLE>@TT_Package.AUTOPILOT_PUSH_BARO_STD_TITLE</TOOLTIP_TITLE>
<TT_DESCRIPTION_ID>@TT_Package.AUTOPILOT_KNOB_BARO_ACTION_SET_STD</TT_DESCRIPTION_ID>
<INTERACTION_TYPE>Push</INTERACTION_TYPE>
</UseTemplate>
</Template>
<Template Name="ASOBO_AUTOPILOT_Knob_Baro_SubTemplate">
<Parameters Type="Override">
<Condition>
<Test>
<Or>
<Arg Valid="USE_PUSH_STD"/>
<Arg Check="PUSH"/>
</Or>
</Test>
<True>
<TYPE>PUSH</TYPE>
</True>
</Condition>
<Condition>
<Test>
<Or>
<Arg Check="AIRLINER_TYPE"/>
<Arg Check="USE_AIRLINER_STD"/>
</Or>
</Test>
<True>
<Condition NotEmpty="AIRLINER_TYPE">
<True>
<TYPE>#AIRLINER_TYPE#</TYPE>
</True>
<False>
<TYPE>AIRLINER</TYPE>
</False>
</Condition>
</True>
</Condition>
</Parameters>
<Parameters Type="Default">
<INPUT_EVENT_ID_SOURCE>AUTOPILOT</INPUT_EVENT_ID_SOURCE>
<NODE_ID>AUTOPILOT_Knob_Baro_#ID##SUFFIX_ID#</NODE_ID>
<ANIM_NAME>AUTOPILOT_Knob_Baro_#ID##SUFFIX_ID#</ANIM_NAME>
<PART_ID>AUTOPILOT_Knob_Baro</PART_ID>
</Parameters>
<Parameters Type="Default">
<BARO_ID>#ID#</BARO_ID>
<WWISE_EVENT_1>autopilot_knob_push_button_on</WWISE_EVENT_1>
<WWISE_EVENT_2>autopilot_knob_push_button_off</WWISE_EVENT_2>
<COUNT>36</COUNT>
<Switch Param="TYPE">
<Case Value="PUSH">
<ANIM_NAME_KNOB>#ANIM_NAME#</ANIM_NAME_KNOB>
<ANIM_NAME_PUSH>AUTOPILOT_Knob_Baro_#ID#_push#SUFFIX_ID#</ANIM_NAME_PUSH>
<THRESHOLD_X_INPUT>0.05</THRESHOLD_X_INPUT>
<THRESHOLD_X_MOUSE>0.01</THRESHOLD_X_MOUSE>
<THRESHOLD_INPUT>0.05</THRESHOLD_INPUT>
<THRESHOLD_MOUSE>0.01</THRESHOLD_MOUSE>
<WWISE_EVENT>autopilot_knob</WWISE_EVENT>
</Case>
<Case Value="A320">
<ANIM_NAME_PUSHPULL>AUTOPILOT_Knob_Baro_#ID#_pushpull#SUFFIX_ID#</ANIM_NAME_PUSHPULL>
<MODE_BARO>0</MODE_BARO>
<MODE_QNH>1</MODE_QNH>
<MODE_STD>2</MODE_STD>
<WWISE_EVENT>autopilot_selector_knob</WWISE_EVENT>
<CENTER_RADIUS>0</CENTER_RADIUS>
</Case>
<Case Value="AIRLINER">
<ANIM_NAME_KNOB>#ANIM_NAME#</ANIM_NAME_KNOB>
<ANIM_NAME_PUSH>AUTOPILOT_Knob_Baro_#ID#_push#SUFFIX_ID#</ANIM_NAME_PUSH>
</Case>
<Default>
<Condition NotEmpty="AIRLINER_TYPE">
<True>
<WWISE_EVENT>autopilot_selector_knob</WWISE_EVENT>
</True>
<False>
<WWISE_EVENT>autopilot_knob</WWISE_EVENT>
</False>
</Condition>
</Default>
</Switch>
</Parameters>
<Parameters Type="Override">
<Switch Param="TYPE">
<Case Value="PUSH">
<ADDITIONAL_EVENT_TYPE>PUSH</ADDITIONAL_EVENT_TYPE>
<BTN_ID_EXTERNAL>Baro_#ID#_Sync</BTN_ID_EXTERNAL>
<BTN_SET_STATE_EXTERNAL>#BARO_ID# (>K:BAROMETRIC)</BTN_SET_STATE_EXTERNAL>
<TT_DESCRIPTION_ID_BTN>@TT_Package.AUTOPILOT_KNOB_BARO_ACTION_SET</TT_DESCRIPTION_ID_BTN>
</Case>
<Case Value="A320">
<DEFAULT_BINDING_STR>Mode</DEFAULT_BINDING_STR>
<ADDITIONAL_EVENT_TYPE>PUSH_PULL</ADDITIONAL_EVENT_TYPE>
<BTN_ID_PULL>Baro_#ID#_STD</BTN_ID_PULL>
<BTN_ID_PUSH>Baro_#ID#_QNH</BTN_ID_PUSH>
<PULL_SET_STATE_EXTERNAL>#MODE_STD# (>L:XMLVAR_Baro#BARO_ID#_Mode)</PULL_SET_STATE_EXTERNAL>
<PUSH_SET_STATE_EXTERNAL>(L:XMLVAR_Baro#BARO_ID#_Mode) #MODE_STD# == if{ #MODE_BARO# (>L:XMLVAR_Baro#BARO_ID#_Mode) } els{ (L:XMLVAR_Baro#BARO_ID#_Mode) ! (>L:XMLVAR_Baro#BARO_ID#_Mode) }</PUSH_SET_STATE_EXTERNAL>
<TT_DESCRIPTION_ID_PULL>@TT_Package.AUTOPILOT_KNOB_BARO_ACTION_SET_STD</TT_DESCRIPTION_ID_PULL>
<TT_DESCRIPTION_ID_PUSH>@TT_Package.AUTOPILOT_KNOB_BARO_ACTION_SET_QNH</TT_DESCRIPTION_ID_PUSH>
<OVERRIDE_PUSH_ANIM_CODE>0 100 (L:XMLVAR_Baro#BARO_ID#_Mode) #MODE_STD# == ? 50 (O:_PushAnimVar) ?</OVERRIDE_PUSH_ANIM_CODE>
<BARO_SET_CONDITION>(L:XMLVAR_Baro#BARO_ID#_Mode) #MODE_STD# !=</BARO_SET_CONDITION>
</Case>
<Case Value="AIRLINER">
<ADDITIONAL_EVENT_TYPE>PUSH</ADDITIONAL_EVENT_TYPE>
<BTN_ID_EXTERNAL>Baro_#ID#_STD</BTN_ID_EXTERNAL>
<BTN_SET_STATE_EXTERNAL>
(L:XMLVAR_Baro#BARO_ID#_ForcedToSTD) ! (>L:XMLVAR_Baro#BARO_ID#_ForcedToSTD)
(L:XMLVAR_Baro#BARO_ID#_ForcedToSTD) if{
(A:KOHLSMAN SETTING MB:#BARO_ID#, mbars) 16 * (>L:XMLVAR_Baro#BARO_ID#_SavedPressure)
#BARO_ID# (>K:BAROMETRIC_STD_PRESSURE)
} els{
#BARO_ID# (L:XMLVAR_Baro#BARO_ID#_SavedPressure) (>K:2:KOHLSMAN_SET)
}
</BTN_SET_STATE_EXTERNAL>
<BARO_SET_CONDITION>(L:XMLVAR_Baro#BARO_ID#_ForcedToSTD) !</BARO_SET_CONDITION>
<TT_DESCRIPTION_ID_BTN>@TT_Package.AUTOPILOT_KNOB_BARO_ACTION_SET_STD</TT_DESCRIPTION_ID_BTN>
</Case>
</Switch>
<KNOB_ID>Baro_#ID#</KNOB_ID>
<SET_STATE_EXTERNAL>p0 0 > if{ #BARO_ID# (>K:KOHLSMAN_INC) (>H:AP_BARO_Up) } els{ #BARO_ID# (>K:KOHLSMAN_DEC) (>H:AP_BARO_Down) }</SET_STATE_EXTERNAL>
</Parameters>
<Parameters Type="Override">
<Condition Valid="ALLOW_HTML_EVENTS_IN_STD">
<True>
<SET_STATE_EXTERNAL>(L:XMLVAR_Baro#BARO_ID#_ForcedToSTD) if{ p0 0 > if{ #BARO_ID# (>H:AP_BARO_Up) } els{ #BARO_ID# (>H:AP_BARO_Down) } } els{ #SET_STATE_EXTERNAL# }</SET_STATE_EXTERNAL>
<BARO_SET_CONDITION/>
</True>
<False>
<Condition NotEmpty="BARO_SET_CONDITION">
<True>
<SET_STATE_EXTERNAL>#BARO_SET_CONDITION# if{ #SET_STATE_EXTERNAL# }</SET_STATE_EXTERNAL>
</True>
</Condition>
</False>
</Condition>
<GET_BARO>(A:KOHLSMAN SETTING MB:#BARO_ID#, inHg)</GET_BARO>
</Parameters>
<Component ID="#NODE_ID#" Node="#NODE_ID#">
<Switch Param="ADDITIONAL_EVENT_TYPE">
<Case Value="PUSH_PULL">
<UseTemplate Name="ASOBO_AUTOPILOT_Push_Event_Only_Template">
<BTN_ID>#BTN_ID_PULL#</BTN_ID>
<EVENT_TYPE>PULL</EVENT_TYPE>
<SET_STATE_EXTERNAL>#PULL_SET_STATE_EXTERNAL#</SET_STATE_EXTERNAL>
<TT_DESCRIPTION_ID>#TT_DESCRIPTION_ID_PULL#</TT_DESCRIPTION_ID>
<Condition Valid="TT_DESCRIPTION_ID_PULL_IS_DYNAMIC">
<TT_DESCRIPTION_IS_DYNAMIC>#TT_DESCRIPTION_ID_PULL_IS_DYNAMIC#</TT_DESCRIPTION_IS_DYNAMIC>
</Condition>
</UseTemplate>
<UseTemplate Name="ASOBO_AUTOPILOT_Push_Event_Only_Template">
<BTN_ID>#BTN_ID_PUSH#</BTN_ID>
<EVENT_TYPE>PUSH</EVENT_TYPE>
<SET_STATE_EXTERNAL>#PUSH_SET_STATE_EXTERNAL#</SET_STATE_EXTERNAL>
<TT_DESCRIPTION_ID>#TT_DESCRIPTION_ID_PUSH#</TT_DESCRIPTION_ID>
<Condition Valid="TT_DESCRIPTION_ID_PUSH_IS_DYNAMIC">
<TT_DESCRIPTION_IS_DYNAMIC>#TT_DESCRIPTION_ID_PUSH_IS_DYNAMIC#</TT_DESCRIPTION_IS_DYNAMIC>
</Condition>
</UseTemplate>
</Case>
<Case Value="PUSH">
<UseTemplate Name="ASOBO_AUTOPILOT_Push_Event_Only_Template">
<BTN_ID>#BTN_ID_EXTERNAL#</BTN_ID>
<EVENT_TYPE>PUSH</EVENT_TYPE>
<SET_STATE_EXTERNAL>#BTN_SET_STATE_EXTERNAL#</SET_STATE_EXTERNAL>
<TT_DESCRIPTION_ID>#TT_DESCRIPTION_ID_BTN#</TT_DESCRIPTION_ID>
<Condition Valid="TT_DESCRIPTION_ID_BTN_IS_DYNAMIC">
<TT_DESCRIPTION_IS_DYNAMIC>#TT_DESCRIPTION_ID_BTN_IS_DYNAMIC#</TT_DESCRIPTION_IS_DYNAMIC>
</Condition>
</UseTemplate>
</Case>
</Switch>
<UseTemplate Name="ASOBO_AUTOPILOT_Knob_Template">
<TT_DESCRIPTION_ID>@TT_Package.AUTOPILOT_KNOB_BARO_ACTION</TT_DESCRIPTION_ID>
<TOOLTIP_TITLE>@TT_Package.AUTOPILOT_KNOB_BARO_TITLE</TOOLTIP_TITLE>
<GET_TT_VALUE_STATE>#GET_BARO# sp0</GET_TT_VALUE_STATE>
<FORMAT_VALUE>l0 '%.2fIN' @sprintf</FORMAT_VALUE>
<Switch Param="ADDITIONAL_EVENT_TYPE">
<Case Value="PUSH_PULL">
<TEMPLATE_VARIANT>_PushPull</TEMPLATE_VARIANT>
<PULL_CODE>(>B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID_PULL#_#DEFAULT_BINDING_STR#)</PULL_CODE>
<PUSH_CODE>(>B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID_PUSH#_#DEFAULT_BINDING_STR#)</PUSH_CODE>
<TOOLTIP_ENTRY_1>#INPUT_EVENT_ID_SOURCE#_#BTN_ID_PULL#</TOOLTIP_ENTRY_1>
<TOOLTIP_ENTRY_2>#INPUT_EVENT_ID_SOURCE#_#BTN_ID_PUSH#</TOOLTIP_ENTRY_2>
</Case>
</Switch>
</UseTemplate>
</Component>
</Template>
</ModelBehaviors>
Templates
Template list
- ASOBO_AUTOPILOT_Push_Active_Template
- ASOBO_AUTOPILOT_Push_Emissive_Template
- ASOBO_AUTOPILOT_Push_Template
- ASOBO_AUTOPILOT_Push_SubTemplate
- ASOBO_AUTOPILOT_Push_Event_Only_Template
- ASOBO_AUTOPILOT_Knob_Template
- ASOBO_AUTOPILOT_Knob_VerticalSpeed_SubTemplate
- ASOBO_AUTOPILOT_Knob_Heading_SubTemplate
- ASOBO_AUTOPILOT_Knob_Altitude_SubTemplate
- ASOBO_AUTOPILOT_Knob_Course_SubTemplate
- ASOBO_AUTOPILOT_Push_STD_SubTemplate
- ASOBO_AUTOPILOT_Knob_Baro_SubTemplate
-
ASOBO_AUTOPILOT_Push_Active_Template
Definition from XML<Template Name="ASOBO_AUTOPILOT_Push_Active_Template"> <Parameters Type="Default"> <Condition Valid="ACTIVE_EMISSIVE_BUTTON"> <True> <ACTIVE_NODE_ID>#NODE_ID#</ACTIVE_NODE_ID> </True> <False> <Condition Check="BASE_NODE_ID"> <True> <ACTIVE_NODE_ID>#BASE_NODE_ID#_Active#SUFFIX_ID#</ACTIVE_NODE_ID> </True> <False> <ACTIVE_NODE_ID>AUTOPILOT_Push_#DEFAULT_NAME#_Active#SUFFIX_ID#</ACTIVE_NODE_ID> </False> </Condition> </False> </Condition> <RECURSIVE_ID>2</RECURSIVE_ID> </Parameters> <Component ID="#ACTIVE_NODE_ID#_Active" Node="#ACTIVE_NODE_ID#"> <Condition Check="EMISSIVE_SIMVAR_ACTIVE"> <True> <UseTemplate Name="ASOBO_GT_Emissive_Gauge_Sim"> <ALT_CODE>(L:XMLVAR_LTS_Test)</ALT_CODE> <Condition Check="EMISSIVE_SIMVAR_ACTIVE"> <EMISSIVE_SIMVAR>#EMISSIVE_SIMVAR_ACTIVE#</EMISSIVE_SIMVAR> </Condition> <Condition Valid="EMISSIVE_CODE_ACTIVE_DRIVES_VISIBILITY"> <EMISSIVE_DRIVES_VISIBILITY>#EMISSIVE_CODE_ACTIVE_DRIVES_VISIBILITY#</EMISSIVE_DRIVES_VISIBILITY> </Condition> </UseTemplate> </True> <False> <UseTemplate Name="ASOBO_GT_Emissive_Gauge"> <ALT_CODE>(L:XMLVAR_LTS_Test)</ALT_CODE> <Condition Check="EMISSIVE_CODE_ACTIVE"> <EMISSIVE_CODE>#EMISSIVE_CODE_ACTIVE#</EMISSIVE_CODE> </Condition> <Condition Valid="EMISSIVE_CODE_ACTIVE_DRIVES_VISIBILITY"> <EMISSIVE_DRIVES_VISIBILITY>#EMISSIVE_CODE_ACTIVE_DRIVES_VISIBILITY#</EMISSIVE_DRIVES_VISIBILITY> </Condition> </UseTemplate> </False> </Condition> </Component> <Condition Valid="ACTIVE_NODE_ID#RECURSIVE_ID#"> <True> <UseTemplate Name="ASOBO_AUTOPILOT_Push_Active_Template"> <RECURSIVE_ID Process="Int">#RECURSIVE_ID# 1 +</RECURSIVE_ID> <ACTIVE_NODE_ID Process="Param">ACTIVE_NODE_ID#RECURSIVE_ID#</ACTIVE_NODE_ID> </UseTemplate> </True> </Condition> </Template>Parameters initialization:
-
Default
Parameters set:
- RECURSIVE_ID
Condition: Valid(ACTIVE_EMISSIVE_BUTTON)
-
Case: True
Parameters set:
- ACTIVE_NODE_ID (using NODE_ID)
-
Case: False
Condition: Check(BASE_NODE_ID)
-
Case: True
Parameters set:
- ACTIVE_NODE_ID (using BASE_NODE_ID, SUFFIX_ID)
-
Case: False
Parameters set:
- ACTIVE_NODE_ID (using DEFAULT_NAME, SUFFIX_ID)
-
Parameters read:
- ACTIVE_NODE_ID
Components:
-
#ACTIVE_NODE_ID#_Active (Node: #ACTIVE_NODE_ID#)
Condition: Check(EMISSIVE_SIMVAR_ACTIVE)
-
Case: True
Templates used:
-
ASOBO_GT_Emissive_Gauge_Sim
Parameters set:
- ALT_CODE
Condition: Check(EMISSIVE_SIMVAR_ACTIVE)
-
Case: True
Parameters set:
- EMISSIVE_SIMVAR (using EMISSIVE_SIMVAR_ACTIVE)
Condition: Valid(EMISSIVE_CODE_ACTIVE_DRIVES_VISIBILITY)
-
Case: True
Parameters set:
- EMISSIVE_DRIVES_VISIBILITY (using EMISSIVE_CODE_ACTIVE_DRIVES_VISIBILITY)
-
ASOBO_GT_Emissive_Gauge_Sim
-
Case: False
Templates used:
-
ASOBO_GT_Emissive_Gauge
Parameters set:
- ALT_CODE
Condition: Check(EMISSIVE_CODE_ACTIVE)
-
Case: True
Parameters set:
- EMISSIVE_CODE (using EMISSIVE_CODE_ACTIVE)
Condition: Valid(EMISSIVE_CODE_ACTIVE_DRIVES_VISIBILITY)
-
Case: True
Parameters set:
- EMISSIVE_DRIVES_VISIBILITY (using EMISSIVE_CODE_ACTIVE_DRIVES_VISIBILITY)
-
ASOBO_GT_Emissive_Gauge
-
Condition: Valid(ACTIVE_NODE_ID#RECURSIVE_ID#)
-
Case: True
Templates used:
-
ASOBO_AUTOPILOT_Push_Active_Template
Parameters set:
- RECURSIVE_ID (using RECURSIVE_ID)
- ACTIVE_NODE_ID (using RECURSIVE_ID)
-
ASOBO_AUTOPILOT_Push_Active_Template
-
Default
-
ASOBO_AUTOPILOT_Push_Emissive_Template
Definition from XML<Template Name="ASOBO_AUTOPILOT_Push_Emissive_Template"> <Parameters Type="Default"> <DEFAULT_TEMPLATE_EMISSIVE>ASOBO_LIGHTING_Cabin_Emissive_Template</DEFAULT_TEMPLATE_EMISSIVE> <Condition Check="BASE_NODE_ID"> <True> <EMISSIVE_NODE_ID>#BASE_NODE_ID#_Text#SUFFIX_ID#</EMISSIVE_NODE_ID> </True> <False> <EMISSIVE_NODE_ID>AUTOPILOT_Push_#DEFAULT_NAME#_Text#SUFFIX_ID#</EMISSIVE_NODE_ID> </False> </Condition> <Switch> <Case Check="POTENTIOMETER"> <EMISSIVE_CODE>(A:LIGHT POTENTIOMETER:#POTENTIOMETER#, Percent over 100)</EMISSIVE_CODE> </Case> <Case Check="SIMVAR_POWER_SETTING"> <EMISSIVE_CODE>(A:#SIMVAR_POWER_SETTING#, Percent over 100)</EMISSIVE_CODE> </Case> <Default> <EMISSIVE_CODE>1</EMISSIVE_CODE> </Default> </Switch> </Parameters> <Condition Check="CIRCUIT_ID"> <False> <UseTemplate Name="#DEFAULT_TEMPLATE_EMISSIVE#"> <NODE_ID>#EMISSIVE_NODE_ID#</NODE_ID> </UseTemplate> </False> <True> <Component ID="#EMISSIVE_NODE_ID#_Emissive_Node" Node="#EMISSIVE_NODE_ID#"> <UseTemplate Name="ASOBO_GT_Emissive_Gauge"> <FAILURE>(A:CIRCUIT ON:#CIRCUIT_ID#, Bool)</FAILURE> </UseTemplate> </Component> </True> </Condition> </Template>Parameters initialization:
-
Default
Parameters set:
- DEFAULT_TEMPLATE_EMISSIVE
Condition: Check(BASE_NODE_ID)
-
Case: True
Parameters set:
- EMISSIVE_NODE_ID (using BASE_NODE_ID, SUFFIX_ID)
-
Case: False
Parameters set:
- EMISSIVE_NODE_ID (using DEFAULT_NAME, SUFFIX_ID)
Condition: Switch
-
Case: Check(POTENTIOMETER)
Parameters read:
- POTENTIOMETER
Parameters set:
- EMISSIVE_CODE (using POTENTIOMETER)
-
Case: Check(SIMVAR_POWER_SETTING)
Parameters read:
- SIMVAR_POWER_SETTING
Parameters set:
- EMISSIVE_CODE (using SIMVAR_POWER_SETTING)
-
Default case:
Parameters set:
- EMISSIVE_CODE
Condition: Check(CIRCUIT_ID)
-
Case: False
Parameters read:
- DEFAULT_TEMPLATE_EMISSIVE
Templates used:
-
#DEFAULT_TEMPLATE_EMISSIVE#
- May resolve to the following template(s):
Parameters set:
- NODE_ID (using EMISSIVE_NODE_ID)
-
Case: True
Parameters read:
- EMISSIVE_NODE_ID
Components:
-
#EMISSIVE_NODE_ID#_Emissive_Node (Node: #EMISSIVE_NODE_ID#)
Templates used:
-
ASOBO_GT_Emissive_Gauge
Parameters set:
- FAILURE (using CIRCUIT_ID)
-
ASOBO_GT_Emissive_Gauge
-
Default
-
ASOBO_AUTOPILOT_Push_Template
Definition from XML<Template Name="ASOBO_AUTOPILOT_Push_Template"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <UseTemplate Name="ASOBO_GT_Helper_Suffix_ID_Appender"> <TEMPLATE_TO_CALL>ASOBO_AUTOPILOT_Push_SubTemplate</TEMPLATE_TO_CALL> </UseTemplate> </Template>Parameters initialization:
-
Default
Parameters set:
- ID
Templates used:
-
ASOBO_GT_Helper_Suffix_ID_Appender
- May include a subtemplate using the parameter 'TEMPLATE_TO_CALL' and resolve to the following template(s):
Parameters set:
- TEMPLATE_TO_CALL
-
Default
-
ASOBO_AUTOPILOT_Push_SubTemplate
Definition from XML<Template Name="ASOBO_AUTOPILOT_Push_SubTemplate"> <Parameters Type="Default"> <Condition Check="NODE_ID"> <True> <BASE_NODE_ID>#NODE_ID#</BASE_NODE_ID> </True> </Condition> <NODE_ID>AUTOPILOT_Push_#DEFAULT_NAME##SUFFIX_ID#</NODE_ID> <ANIM_NAME>AUTOPILOT_Push_#DEFAULT_NAME##SUFFIX_ID#</ANIM_NAME> <PART_ID>AUTOPILOT_Push_#DEFAULT_NAME#</PART_ID> <WWISE_EVENT_AUTOPILOT_SWITCH_ON>autopilot_switch_on</WWISE_EVENT_AUTOPILOT_SWITCH_ON> <WWISE_EVENT_AUTOPILOT_SWITCH_OFF>autopilot_switch_off</WWISE_EVENT_AUTOPILOT_SWITCH_OFF> <WWISE_EVENT_AUTOPILOT_PUSH_BUTTON_ON>autopilot_push_button_on</WWISE_EVENT_AUTOPILOT_PUSH_BUTTON_ON> <WWISE_EVENT_AUTOPILOT_PUSH_BUTTON_OFF>autopilot_push_button_off</WWISE_EVENT_AUTOPILOT_PUSH_BUTTON_OFF> <Condition Check="ANIM_CODE"> <AXIS>Y</AXIS> </Condition> <INPUT_EVENT_ID_SOURCE>AUTOPILOT</INPUT_EVENT_ID_SOURCE> <USE_INPUT_EVENT_ID>AUTOPILOT</USE_INPUT_EVENT_ID> </Parameters> <Parameters Type="Default"> <Condition NotEmpty="GET_STATE_EXTERNAL"> <True> <LEFT_SINGLE_CODE>(>B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID#_Toggle)</LEFT_SINGLE_CODE> <CHECK_STATE_HAS_CHANGED>True</CHECK_STATE_HAS_CHANGED> </True> <False> <LEFT_SINGLE_CODE>(>B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID#_Push)</LEFT_SINGLE_CODE> <BINDING_INC_0>Push</BINDING_INC_0> <BINDING_INC_0_PARAM_0>1</BINDING_INC_0_PARAM_0> </False> </Condition> <Condition NotEmpty="EVENT_ID"> <BINDING_INC_0_EVENT_ID>#EVENT_ID#</BINDING_INC_0_EVENT_ID> </Condition> <Condition Valid="TOOLTIP_TITLE"> <TOOLTIP_ENTRY_0>#INPUT_EVENT_ID_SOURCE#_#BTN_ID#</TOOLTIP_ENTRY_0> </Condition> </Parameters> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <UseInputEvent ID="#USE_INPUT_EVENT_ID#"> <Condition Check="ANIM_CODE"> <TT_ICON>MOVE_#AXIS#</TT_ICON> </Condition> </UseInputEvent> <Condition Check="ANIM_CODE"> <True> <UseTemplate Name="ASOBO_GT_Switch_Code"> <WWISE_EVENT_1>#WWISE_EVENT_AUTOPILOT_SWITCH_ON#</WWISE_EVENT_1> <WWISE_EVENT_2>#WWISE_EVENT_AUTOPILOT_SWITCH_OFF#</WWISE_EVENT_2> </UseTemplate> </True> <False> <UseTemplate Name="ASOBO_GT_Push_Button"> <WWISE_EVENT_1>#WWISE_EVENT_AUTOPILOT_PUSH_BUTTON_ON#</WWISE_EVENT_1> <NORMALIZED_TIME_1>0.1</NORMALIZED_TIME_1> <WWISE_EVENT_2>#WWISE_EVENT_AUTOPILOT_PUSH_BUTTON_OFF#</WWISE_EVENT_2> <NORMALIZED_TIME_2>0.5</NORMALIZED_TIME_2> </UseTemplate> </False> </Condition> </Component> <Condition Valid="NO_INDICATOR"> <False> <UseTemplate Name="ASOBO_AUTOPILOT_Push_Active_Template"/> </False> </Condition> <Condition Valid="NO_TEXT_EMISSIVE"> <False> <UseTemplate Name="ASOBO_AUTOPILOT_Push_Emissive_Template"/> </False> </Condition> <Condition Valid="BUTTON_EMISSIVE"> <True> <UseTemplate Name="ASOBO_LIGHTING_Cabin_Emissive_Template"/> </True> </Condition> <Condition Check="INIT"> <Update Once="True">#INIT#</Update> </Condition> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID (using DEFAULT_NAME, SUFFIX_ID)
- ANIM_NAME (using DEFAULT_NAME, SUFFIX_ID)
- PART_ID (using DEFAULT_NAME)
- WWISE_EVENT_AUTOPILOT_SWITCH_ON
- WWISE_EVENT_AUTOPILOT_SWITCH_OFF
- WWISE_EVENT_AUTOPILOT_PUSH_BUTTON_ON
- WWISE_EVENT_AUTOPILOT_PUSH_BUTTON_OFF
- INPUT_EVENT_ID_SOURCE
- USE_INPUT_EVENT_ID
Condition: Check(NODE_ID)
-
Case: True
Parameters set:
- BASE_NODE_ID (using NODE_ID)
Condition: Check(ANIM_CODE)
-
Case: True
Parameters set:
- AXIS
-
Default
Condition: NotEmpty(GET_STATE_EXTERNAL)
-
Case: True
Parameters set:
- LEFT_SINGLE_CODE (using INPUT_EVENT_ID_SOURCE, BTN_ID)
- CHECK_STATE_HAS_CHANGED
-
Case: False
Parameters set:
- LEFT_SINGLE_CODE (using INPUT_EVENT_ID_SOURCE, BTN_ID)
- BINDING_INC_0
- BINDING_INC_0_PARAM_0
Condition: NotEmpty(EVENT_ID)
-
Case: True
Parameters set:
- BINDING_INC_0_EVENT_ID (using EVENT_ID)
Condition: Valid(TOOLTIP_TITLE)
-
Case: True
Parameters set:
- TOOLTIP_ENTRY_0 (using INPUT_EVENT_ID_SOURCE, BTN_ID)
-
Parameters read:
- NODE_ID
Components:
-
#NODE_ID# (Node: #NODE_ID#)
Parameters read:
- USE_INPUT_EVENT_ID
Condition: Check(ANIM_CODE)
-
Case: True
Parameters set:
- TT_ICON (using AXIS)
Condition: Check(ANIM_CODE)
-
Case: True
Templates used:
-
ASOBO_GT_Switch_Code
Parameters set:
- WWISE_EVENT_1 (using WWISE_EVENT_AUTOPILOT_SWITCH_ON)
- WWISE_EVENT_2 (using WWISE_EVENT_AUTOPILOT_SWITCH_OFF)
-
ASOBO_GT_Switch_Code
-
Case: False
Templates used:
-
ASOBO_GT_Push_Button
Parameters set:
- WWISE_EVENT_1 (using WWISE_EVENT_AUTOPILOT_PUSH_BUTTON_ON)
- NORMALIZED_TIME_1
- WWISE_EVENT_2 (using WWISE_EVENT_AUTOPILOT_PUSH_BUTTON_OFF)
- NORMALIZED_TIME_2
-
ASOBO_GT_Push_Button
Condition: Valid(NO_INDICATOR)
-
Case: False
Templates used:
Condition: Valid(NO_TEXT_EMISSIVE)
-
Case: False
Templates used:
-
ASOBO_AUTOPILOT_Push_Emissive_Template
- May include a subtemplate using the parameter 'DEFAULT_TEMPLATE_EMISSIVE' and resolve to the following template(s):
-
ASOBO_AUTOPILOT_Push_Emissive_Template
Condition: Valid(BUTTON_EMISSIVE)
-
Case: True
Templates used:
Condition: Check(INIT)
-
Case: True
Parameters read:
- INIT
-
Default
-
ASOBO_AUTOPILOT_Push_Event_Only_Template
Definition from XML<Template Name="ASOBO_AUTOPILOT_Push_Event_Only_Template"> <Parameters Type="Default"> <EVENT_TYPE>PUSH</EVENT_TYPE> </Parameters> <Parameters Type="Override"> <UseParametersFn Name="Compute_First_Available_Bindings"/> </Parameters> <Parameters Type="Default"> <INPUT_EVENT_ID_SOURCE>AUTOPILOT</INPUT_EVENT_ID_SOURCE> <USE_INPUT_EVENT_ID>AUTOPILOT</USE_INPUT_EVENT_ID> <Switch Param="EVENT_TYPE"> <Case Value="PUSH"> <DEFAULT_BINDING_STR>Push</DEFAULT_BINDING_STR> <TT_INTERACTION>PRIMARY_DOWN+SECONDARY_DOWN</TT_INTERACTION> <TT_INTERACTION_LOCKABLE>PRIMARY_DOWN</TT_INTERACTION_LOCKABLE> <ANIM_VAR>_PushAnimVar</ANIM_VAR> <TT_ICON>Push</TT_ICON> </Case> <Case Value="PULL"> <DEFAULT_BINDING_STR>Pull</DEFAULT_BINDING_STR> <TT_INTERACTION>PRIMARY_DOWN+TERTIARY_DOWN</TT_INTERACTION> <TT_INTERACTION_LOCKABLE>SECONDARY_DOWN</TT_INTERACTION_LOCKABLE> <ANIM_VAR>_PullAnimVar</ANIM_VAR> <TT_ICON>Pull</TT_ICON> </Case> </Switch> </Parameters> <UseInputEvent ID="#USE_INPUT_EVENT_ID#"> <BINDING_INC_#FIRST_AVAILABLE_INC_BINDING#>#DEFAULT_BINDING_STR#</BINDING_INC_#FIRST_AVAILABLE_INC_BINDING#> <BINDING_INC_#FIRST_AVAILABLE_INC_BINDING#_PARAM_0>1</BINDING_INC_#FIRST_AVAILABLE_INC_BINDING#_PARAM_0> <ANIM>HOLD</ANIM> </UseInputEvent> </Template>Parameters initialization:
-
Default
Parameters set:
- EVENT_TYPE
-
Override
ParametersFn used:
-
Default
Parameters set:
- INPUT_EVENT_ID_SOURCE
- USE_INPUT_EVENT_ID
Condition: Switch(EVENT_TYPE)
-
Case: PUSH
Parameters set:
- DEFAULT_BINDING_STR
- TT_INTERACTION
- TT_INTERACTION_LOCKABLE
- ANIM_VAR
- TT_ICON
-
Case: PULL
Parameters set:
- DEFAULT_BINDING_STR
- TT_INTERACTION
- TT_INTERACTION_LOCKABLE
- ANIM_VAR
- TT_ICON
Parameters read:
- USE_INPUT_EVENT_ID
Parameters set:
- BINDING_INC_#FIRST_AVAILABLE_INC_BINDING# (using DEFAULT_BINDING_STR)
- BINDING_INC_#FIRST_AVAILABLE_INC_BINDING#_PARAM_0
- ANIM
-
Default
-
ASOBO_AUTOPILOT_Knob_Template
Definition from XML<Template Name="ASOBO_AUTOPILOT_Knob_Template"> <Parameters Type="Default"> <INPUT_EVENT_ID_SOURCE>AUTOPILOT</INPUT_EVENT_ID_SOURCE> <USE_INPUT_EVENT_ID>AUTOPILOT</USE_INPUT_EVENT_ID> <IS_INFINITE>True</IS_INFINITE> </Parameters> <Parameters Type="Default"> <Condition Valid="IS_INFINITE"> <True> <KNOB_TYPE>Infinite</KNOB_TYPE> </True> <False> <KNOB_TYPE>Finite_Code</KNOB_TYPE> <Condition Valid="USE_BTN_IE"> <BTN_ID>#KNOB_ID#</BTN_ID> </Condition> </False> </Condition> <Condition Valid="BTN_ID_EXTERNAL"> <True> <TEMPLATE_VARIANT>_Push</TEMPLATE_VARIANT> </True> <False> <TEMPLATE_VARIANT/> </False> </Condition> <CURSOR_LEFT>TurnLeftSmall</CURSOR_LEFT> <CURSOR_RIGHT>TurnRightSmall</CURSOR_RIGHT> </Parameters> <Parameters Type="Default"> <COUNT>36</COUNT> <Condition Valid="TOOLTIP_TITLE"> <TOOLTIP_ENTRY_0>#INPUT_EVENT_ID_SOURCE#_#KNOB_ID#</TOOLTIP_ENTRY_0> <Condition Valid="BTN_ID_EXTERNAL"> <TOOLTIP_ENTRY_1>#INPUT_EVENT_ID_SOURCE#_#BTN_ID_EXTERNAL#</TOOLTIP_ENTRY_1> </Condition> </Condition> </Parameters> <Parameters Type="Override"> <Condition Valid="BTN_ID_EXTERNAL"> <LEFT_SINGLE_CODE>(>B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID_EXTERNAL#_Push)</LEFT_SINGLE_CODE> </Condition> <CLOCKWISE_CODE>1 (>B:#INPUT_EVENT_ID_SOURCE#_#KNOB_ID#_Inc)</CLOCKWISE_CODE> <ANTICLOCKWISE_CODE>1 (>B:#INPUT_EVENT_ID_SOURCE#_#KNOB_ID#_Dec)</ANTICLOCKWISE_CODE> </Parameters> <Parameters Type="Override"> <Condition Valid="USE_BTN_IE"> <True> <TEMPLATE_TO_CALL>ASOBO_GT_Switch_XStates</TEMPLATE_TO_CALL> </True> <False> <TEMPLATE_TO_CALL>ASOBO_GT_Knob_#KNOB_TYPE##TEMPLATE_VARIANT#</TEMPLATE_TO_CALL> <ANIM_VAR_HANDLED_SEPARATELY>True</ANIM_VAR_HANDLED_SEPARATELY> </False> </Condition> </Parameters> <UseInputEvent ID="#USE_INPUT_EVENT_ID#"/> <UseTemplate Name="#TEMPLATE_TO_CALL#"/> </Template>Parameters initialization:
-
Default
Parameters set:
- INPUT_EVENT_ID_SOURCE
- USE_INPUT_EVENT_ID
- IS_INFINITE
-
Default
Parameters set:
- CURSOR_LEFT
- CURSOR_RIGHT
Condition: Valid(IS_INFINITE)
-
Case: True
Parameters set:
- KNOB_TYPE
-
Case: False
Parameters set:
- KNOB_TYPE
Condition: Valid(USE_BTN_IE)
-
Case: True
Parameters set:
- BTN_ID (using KNOB_ID)
Condition: Valid(BTN_ID_EXTERNAL)
-
Case: True
Parameters set:
- TEMPLATE_VARIANT
-
Case: False
Parameters set:
- TEMPLATE_VARIANT
-
Default
Parameters set:
- COUNT
Condition: Valid(TOOLTIP_TITLE)
-
Case: True
Parameters set:
- TOOLTIP_ENTRY_0 (using INPUT_EVENT_ID_SOURCE, KNOB_ID)
Condition: Valid(BTN_ID_EXTERNAL)
-
Case: True
Parameters set:
- TOOLTIP_ENTRY_1 (using INPUT_EVENT_ID_SOURCE, BTN_ID_EXTERNAL)
-
Override
Parameters set:
- CLOCKWISE_CODE (using INPUT_EVENT_ID_SOURCE, KNOB_ID)
- ANTICLOCKWISE_CODE (using INPUT_EVENT_ID_SOURCE, KNOB_ID)
Condition: Valid(BTN_ID_EXTERNAL)
-
Case: True
Parameters set:
- LEFT_SINGLE_CODE (using INPUT_EVENT_ID_SOURCE, BTN_ID_EXTERNAL)
-
Override
Condition: Valid(USE_BTN_IE)
-
Case: True
Parameters set:
- TEMPLATE_TO_CALL
-
Case: False
Parameters set:
- TEMPLATE_TO_CALL (using KNOB_TYPE, TEMPLATE_VARIANT)
- ANIM_VAR_HANDLED_SEPARATELY
-
Parameters read:
- USE_INPUT_EVENT_ID
- TEMPLATE_TO_CALL
Templates used:
-
#TEMPLATE_TO_CALL#
-
May resolve to the following template(s):
- ASOBO_GT_Switch_XStates
- ASOBO_GT_Knob_#KNOB_TYPE##TEMPLATE_VARIANT#
-
May resolve to the following template(s):
-
Default
-
ASOBO_AUTOPILOT_Knob_VerticalSpeed_SubTemplate
Definition from XML<Template Name="ASOBO_AUTOPILOT_Knob_VerticalSpeed_SubTemplate"> <Parameters Type="Default"> <INPUT_EVENT_ID_SOURCE>AUTOPILOT</INPUT_EVENT_ID_SOURCE> <NODE_ID>AUTOPILOT_Knob_VerticalSpeed#SUFFIX_ID#</NODE_ID> <ANIM_NAME>AUTOPILOT_Knob_VerticalSpeed#SUFFIX_ID#</ANIM_NAME> <ANIM_NAME_PUSHPULL>AUTOPILOT_Knob_VerticalSpeed_PushPull#SUFFIX_ID#</ANIM_NAME_PUSHPULL> <Condition Valid="SEPARATED_INTERACTION"> <HITBOX_UP_NODE_ID>AUTOPILOT_Knob_VerticalSpeed_DN#SUFFIX_ID#</HITBOX_UP_NODE_ID> <HITBOX_DOWN_NODE_ID>AUTOPILOT_Knob_VerticalSpeed_UP#SUFFIX_ID#</HITBOX_DOWN_NODE_ID> </Condition> <PART_ID>AUTOPILOT_Knob_VerticalSpeed</PART_ID> <WWISE_EVENT>autopilot_verticalspeed_knob</WWISE_EVENT> <WWISE_EVENT_1>autopilot_knob_push_button_on</WWISE_EVENT_1> <WWISE_EVENT_2>autopilot_knob_push_button_off</WWISE_EVENT_2> <COUNT>36</COUNT> <MAX_PITCH>25</MAX_PITCH> <Switch> <Case Check="AIRBUS_TYPE"> <TYPE>AIRBUS</TYPE> </Case> <Case Valid="SET_AIRSPEED_ON_FLC"> <TYPE>FLC_AIRSPEED</TYPE> </Case> </Switch> </Parameters> <Parameters Type="Default"> <Switch Param="TYPE"> <Case Value="AIRBUS"> <CLOCKWISE_DIR>INC</CLOCKWISE_DIR> <ANTICLOCKWISE_DIR>DEC</ANTICLOCKWISE_DIR> <MACH_INCREMENT>1</MACH_INCREMENT> <SPEED_INCREMENT>1</SPEED_INCREMENT> <VS_INCREMENT>100</VS_INCREMENT> <VS_INDEX>3</VS_INDEX> <FORMAT_VS_VALUE>(L:XMLVAR_TRK_FPA_MODE_ACTIVE) if{ l0 60 / near 10 / '%.2f FPA' (F:Format) } els{ l0 '%d ft/min' (F:Format) }</FORMAT_VS_VALUE> </Case> <Default> <VS_INDEX>1</VS_INDEX> <FORMAT_VS_VALUE>l0 '%d ft/min' @sprintf</FORMAT_VS_VALUE> <Switch> <Case Valid="UP_DEC_DN_INC"> <CLOCKWISE_DIR>INC</CLOCKWISE_DIR> <ANTICLOCKWISE_DIR>DEC</ANTICLOCKWISE_DIR> <CLOCKWISE_DIR_PITCH>UP</CLOCKWISE_DIR_PITCH> <ANTICLOCKWISE_DIR_PITCH>DN</ANTICLOCKWISE_DIR_PITCH> <Condition Check="UP_DEC_DN_INC" Match="INVERT_ANIM"> <INVERT_ANIM>True</INVERT_ANIM> </Condition> <MACH_INCREMENT>1</MACH_INCREMENT> <SPEED_INCREMENT>1</SPEED_INCREMENT> <VS_INCREMENT>100</VS_INCREMENT> <PITCH_INCREMENT>0.2</PITCH_INCREMENT> </Case> <Default> <CLOCKWISE_DIR>DEC</CLOCKWISE_DIR> <ANTICLOCKWISE_DIR>INC</ANTICLOCKWISE_DIR> <CLOCKWISE_DIR_PITCH>DN</CLOCKWISE_DIR_PITCH> <ANTICLOCKWISE_DIR_PITCH>UP</ANTICLOCKWISE_DIR_PITCH> <MACH_INCREMENT>-1</MACH_INCREMENT> <SPEED_INCREMENT>-1</SPEED_INCREMENT> <PITCH_INCREMENT>-0.2</PITCH_INCREMENT> <VS_INCREMENT>100</VS_INCREMENT> </Default> </Switch> </Default> </Switch> <SWITCH_DIRECTION>Vertical</SWITCH_DIRECTION> <THRESHOLD_Y_MOUSE>0.005</THRESHOLD_Y_MOUSE> </Parameters> <Parameters Type="Override"> <Condition> <Test> <Or> <Arg Check="HITBOX_UP_NODE_ID"/> <Arg Check="HITBOX_DOWN_NODE_ID"/> </Or> </Test> <True> <SEPARATED_INTERACTION>True</SEPARATED_INTERACTION> </True> </Condition> </Parameters> <Parameters Type="Override"> <Switch Param="TYPE"> <Case Value="FLC_AIRSPEED"> <SET_STATE_EXTERNAL> 1 -1 p0 0 > ? sp0 l0 -1 * sp1 (A:AUTOPILOT FLIGHT LEVEL CHANGE, Bool) if{ (L:XMLVAR_AirSpeedIsInMach) if{ (A:AUTOPILOT MACH HOLD VAR, number) #MACH_INCREMENT# l1 * + 0 max (>K:AP_MACH_VAR_SET) } els{ (A:AUTOPILOT AIRSPEED HOLD VAR, knot) #SPEED_INCREMENT# l1 * + 0 max (>K:AP_SPD_VAR_SET) } } els{ (A:AUTOPILOT VERTICAL HOLD:#VS_INDEX#, Bool) if{ #VS_INDEX# (A:AUTOPILOT VERTICAL HOLD VAR:#VS_INDEX#, feet per minute) #VS_INCREMENT# l0 * + (>K:2:AP_VS_VAR_SET_ENGLISH) } els{ (A:AUTOPILOT PITCH HOLD, Bool) if{ (A:AUTOPILOT PITCH HOLD REF, degrees) -#PITCH_INCREMENT# l0 * + #MAX_PITCH# / 1 min -1 max 16384 * (>K:AP_PITCH_REF_SET) } } } </SET_STATE_EXTERNAL> </Case> <Case Value="AIRBUS"> <SET_STATE_EXTERNAL> 1 -1 p0 0 > ? sp0 #VS_INDEX# (A:AUTOPILOT VERTICAL HOLD VAR:#VS_INDEX#, feet per minute) #VS_INCREMENT# l0 * + (>K:2:AP_VS_VAR_SET_ENGLISH) p0 0 > if{ (>H:A320_Neo_FCU_VS_INC) } els{ (>H:A320_Neo_FCU_VS_DEC) } </SET_STATE_EXTERNAL> <BTN_ID_PULL>VerticalSpeed_Hold</BTN_ID_PULL> <PULL_SET_STATE_EXTERNAL>(>H:A320_Neo_FCU_VS_HOLD)</PULL_SET_STATE_EXTERNAL> <TT_DESCRIPTION_ID_PULL>@TT_Package.AUTOPILOT_KNOB_VERTICALSPEED_ACTION_HOLD</TT_DESCRIPTION_ID_PULL> <BTN_ID_PUSH>VerticalSpeed_Zero</BTN_ID_PUSH> <PUSH_SET_STATE_EXTERNAL>(>H:A320_Neo_FCU_VS_ZERO)</PUSH_SET_STATE_EXTERNAL> <TT_DESCRIPTION_ID_PUSH>@TT_Package.AUTOPILOT_KNOB_VERTICALSPEED_ACTION_ZERO</TT_DESCRIPTION_ID_PUSH> <ADDITIONAL_EVENT_TYPE>PUSH_PULL</ADDITIONAL_EVENT_TYPE> </Case> <Default> <SET_STATE_EXTERNAL> 1 -1 p0 0 > ? sp0 #VS_INDEX# (A:AUTOPILOT VERTICAL HOLD VAR:#VS_INDEX#, feet per minute) #VS_INCREMENT# l0 * + (>K:2:AP_VS_VAR_SET_ENGLISH) </SET_STATE_EXTERNAL> </Default> </Switch> <KNOB_ID>VerticalSpeed</KNOB_ID> </Parameters> <Switch> <Case Valid="SEPARATED_INTERACTION"> <Component ID="#NODE_ID#"> <UseTemplate Name="ASOBO_AUTOPILOT_Knob_Template"> <TEMPLATE_VARIANT>_SeparatedInteraction</TEMPLATE_VARIANT> <TT_DESCRIPTION_ID>@TT_Package.AUTOPILOT_KNOB_VERTICALSPEED_ACTION_SET</TT_DESCRIPTION_ID> <TOOLTIP_TITLE>@TT_Package.AUTOPILOT_KNOB_VERTICALSPEED_TITLE</TOOLTIP_TITLE> <GET_TT_VALUE_STATE>(A:AUTOPILOT VERTICAL HOLD VAR:#VS_INDEX#, feet per minute) sp0</GET_TT_VALUE_STATE> <FORMAT_VALUE>l0 '%d ft/min' @sprintf</FORMAT_VALUE> <INTERACTION_AXIS>Y</INTERACTION_AXIS> <TT_ICON>MOVE_AXIS_Y</TT_ICON> </UseTemplate> </Component> </Case> <Default> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <Switch Param="ADDITIONAL_EVENT_TYPE"> <Case Value="PUSH_PULL"> <UseTemplate Name="ASOBO_AUTOPILOT_Push_Event_Only_Template"> <BTN_ID>#BTN_ID_PULL#</BTN_ID> <EVENT_TYPE>PULL</EVENT_TYPE> <SET_STATE_EXTERNAL>#PULL_SET_STATE_EXTERNAL#</SET_STATE_EXTERNAL> <TT_DESCRIPTION_ID>#TT_DESCRIPTION_ID_PULL#</TT_DESCRIPTION_ID> </UseTemplate> <UseTemplate Name="ASOBO_AUTOPILOT_Push_Event_Only_Template"> <BTN_ID>#BTN_ID_PUSH#</BTN_ID> <EVENT_TYPE>PUSH</EVENT_TYPE> <SET_STATE_EXTERNAL>#PUSH_SET_STATE_EXTERNAL#</SET_STATE_EXTERNAL> <TT_DESCRIPTION_ID>#TT_DESCRIPTION_ID_PUSH#</TT_DESCRIPTION_ID> </UseTemplate> </Case> </Switch> <UseTemplate Name="ASOBO_AUTOPILOT_Knob_Template"> <Switch Param="ADDITIONAL_EVENT_TYPE"> <Case Value="PUSH_PULL"> <TEMPLATE_VARIANT>_PushPull</TEMPLATE_VARIANT> <PULL_CODE>(>B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID_PULL#_Pull)</PULL_CODE> <PUSH_CODE>(>B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID_PUSH#_Push)</PUSH_CODE> <TOOLTIP_ENTRY_1>#INPUT_EVENT_ID_SOURCE#_#BTN_ID_PULL#</TOOLTIP_ENTRY_1> <TOOLTIP_ENTRY_2>#INPUT_EVENT_ID_SOURCE#_#BTN_ID_PUSH#</TOOLTIP_ENTRY_2> <CENTER_RADIUS>0</CENTER_RADIUS> </Case> </Switch> <Condition Check="TYPE" Match="AIRBUS"> <False> <IS_WHEEL>True</IS_WHEEL> </False> </Condition> <TT_DESCRIPTION_ID>@TT_Package.AUTOPILOT_KNOB_VERTICALSPEED_ACTION_SET</TT_DESCRIPTION_ID> <TOOLTIP_TITLE>@TT_Package.AUTOPILOT_KNOB_VERTICALSPEED_TITLE</TOOLTIP_TITLE> <GET_TT_VALUE_STATE>(A:AUTOPILOT VERTICAL HOLD VAR:#VS_INDEX#, feet per minute) sp0</GET_TT_VALUE_STATE> <FORMAT_VALUE>#FORMAT_VS_VALUE#</FORMAT_VALUE> </UseTemplate> </Component> </Default> </Switch> </Template>Parameters initialization:
-
Default
Parameters set:
- INPUT_EVENT_ID_SOURCE
- NODE_ID (using SUFFIX_ID)
- ANIM_NAME (using SUFFIX_ID)
- ANIM_NAME_PUSHPULL (using SUFFIX_ID)
- PART_ID
- WWISE_EVENT
- WWISE_EVENT_1
- WWISE_EVENT_2
- COUNT
- MAX_PITCH
Condition: Valid(SEPARATED_INTERACTION)
-
Case: True
Parameters set:
- HITBOX_UP_NODE_ID (using SUFFIX_ID)
- HITBOX_DOWN_NODE_ID (using SUFFIX_ID)
Condition: Switch
-
Case: Check(AIRBUS_TYPE)
Parameters read:
- AIRBUS_TYPE
Parameters set:
- TYPE
-
Case: Valid(SET_AIRSPEED_ON_FLC)
Parameters set:
- TYPE
-
Default
Parameters set:
- SWITCH_DIRECTION
- THRESHOLD_Y_MOUSE
Condition: Switch(TYPE)
-
Case: AIRBUS
Parameters set:
- CLOCKWISE_DIR
- ANTICLOCKWISE_DIR
- MACH_INCREMENT
- SPEED_INCREMENT
- VS_INCREMENT
- VS_INDEX
- FORMAT_VS_VALUE
-
Default case:
Parameters set:
- VS_INDEX
- FORMAT_VS_VALUE
Condition: Switch
-
Case: Valid(UP_DEC_DN_INC)
Parameters set:
- CLOCKWISE_DIR
- ANTICLOCKWISE_DIR
- CLOCKWISE_DIR_PITCH
- ANTICLOCKWISE_DIR_PITCH
- MACH_INCREMENT
- SPEED_INCREMENT
- VS_INCREMENT
- PITCH_INCREMENT
Condition: Check(UP_DEC_DN_INC)
-
Case: True
Parameters set:
- INVERT_ANIM
-
Default case:
Parameters set:
- CLOCKWISE_DIR
- ANTICLOCKWISE_DIR
- CLOCKWISE_DIR_PITCH
- ANTICLOCKWISE_DIR_PITCH
- MACH_INCREMENT
- SPEED_INCREMENT
- PITCH_INCREMENT
- VS_INCREMENT
-
Override
Condition: Test(HITBOX_UP_NODE_ID, HITBOX_DOWN_NODE_ID)
-
Case: True
Parameters set:
- SEPARATED_INTERACTION
-
-
Override
Parameters set:
- KNOB_ID
Condition: Switch(TYPE)
-
Case: FLC_AIRSPEED
Parameters set:
- SET_STATE_EXTERNAL (using MACH_INCREMENT, SPEED_INCREMENT, VS_INDEX, VS_INCREMENT, PITCH_INCREMENT, MAX_PITCH)
-
Case: AIRBUS
Parameters set:
- SET_STATE_EXTERNAL (using VS_INDEX, VS_INCREMENT)
- BTN_ID_PULL
- PULL_SET_STATE_EXTERNAL
- TT_DESCRIPTION_ID_PULL
- BTN_ID_PUSH
- PUSH_SET_STATE_EXTERNAL
- TT_DESCRIPTION_ID_PUSH
- ADDITIONAL_EVENT_TYPE
-
Default case:
Parameters set:
- SET_STATE_EXTERNAL (using VS_INDEX, VS_INCREMENT)
Condition: Switch
-
Case: Valid(SEPARATED_INTERACTION)
Parameters read:
- NODE_ID
Components:
-
#NODE_ID#
Templates used:
-
ASOBO_AUTOPILOT_Knob_Template
-
May include a subtemplate using the parameter 'TEMPLATE_TO_CALL' and resolve to the following template(s):
- ASOBO_GT_Switch_XStates
- ASOBO_GT_Knob_#KNOB_TYPE##TEMPLATE_VARIANT#
Parameters set:
- TEMPLATE_VARIANT
- TT_DESCRIPTION_ID
- TOOLTIP_TITLE
- GET_TT_VALUE_STATE (using VS_INDEX)
- FORMAT_VALUE
- INTERACTION_AXIS
- TT_ICON
-
May include a subtemplate using the parameter 'TEMPLATE_TO_CALL' and resolve to the following template(s):
-
ASOBO_AUTOPILOT_Knob_Template
-
Default case:
Parameters read:
- NODE_ID
Components:
-
#NODE_ID# (Node: #NODE_ID#)
Templates used:
-
ASOBO_AUTOPILOT_Knob_Template
-
May include a subtemplate using the parameter 'TEMPLATE_TO_CALL' and resolve to the following template(s):
- ASOBO_GT_Switch_XStates
- ASOBO_GT_Knob_#KNOB_TYPE##TEMPLATE_VARIANT#
Parameters set:
- TT_DESCRIPTION_ID
- TOOLTIP_TITLE
- GET_TT_VALUE_STATE (using VS_INDEX)
- FORMAT_VALUE (using FORMAT_VS_VALUE)
Condition: Switch(ADDITIONAL_EVENT_TYPE)
-
Case: PUSH_PULL
Parameters set:
- TEMPLATE_VARIANT
- PULL_CODE (using INPUT_EVENT_ID_SOURCE, BTN_ID_PULL)
- PUSH_CODE (using INPUT_EVENT_ID_SOURCE, BTN_ID_PUSH)
- TOOLTIP_ENTRY_1 (using INPUT_EVENT_ID_SOURCE, BTN_ID_PULL)
- TOOLTIP_ENTRY_2 (using INPUT_EVENT_ID_SOURCE, BTN_ID_PUSH)
- CENTER_RADIUS
Condition: Check(TYPE)
-
Case: False
Parameters set:
- IS_WHEEL
-
May include a subtemplate using the parameter 'TEMPLATE_TO_CALL' and resolve to the following template(s):
Condition: Switch(ADDITIONAL_EVENT_TYPE)
-
Case: PUSH_PULL
Templates used:
-
ASOBO_AUTOPILOT_Push_Event_Only_Template
Parameters set:
- BTN_ID (using BTN_ID_PULL)
- EVENT_TYPE
- SET_STATE_EXTERNAL (using PULL_SET_STATE_EXTERNAL)
- TT_DESCRIPTION_ID (using TT_DESCRIPTION_ID_PULL)
-
ASOBO_AUTOPILOT_Push_Event_Only_Template
Parameters set:
- BTN_ID (using BTN_ID_PUSH)
- EVENT_TYPE
- SET_STATE_EXTERNAL (using PUSH_SET_STATE_EXTERNAL)
- TT_DESCRIPTION_ID (using TT_DESCRIPTION_ID_PUSH)
-
ASOBO_AUTOPILOT_Push_Event_Only_Template
-
ASOBO_AUTOPILOT_Knob_Template
-
Default
-
ASOBO_AUTOPILOT_Knob_Heading_SubTemplate
Definition from XML<Template Name="ASOBO_AUTOPILOT_Knob_Heading_SubTemplate"> <Parameters Type="Default"> <INPUT_EVENT_ID_SOURCE>AUTOPILOT</INPUT_EVENT_ID_SOURCE> <ANIM_NAME_KNOB>AUTOPILOT_Knob_Heading#SUFFIX_ID#</ANIM_NAME_KNOB> <ANIM_NAME_PUSH>AUTOPILOT_Knob_Heading_Push#SUFFIX_ID#</ANIM_NAME_PUSH> <ANIM_NAME_PUSHPULL>AUTOPILOT_Knob_Heading_PushPull#SUFFIX_ID#</ANIM_NAME_PUSHPULL> <PART_ID>AUTOPILOT_Knob_Heading</PART_ID> <NODE_ID>AUTOPILOT_Knob_Heading#SUFFIX_ID#</NODE_ID> <WWISE_EVENT_1>autopilot_knob_push_button_on</WWISE_EVENT_1> <NORMALIZED_TIME_1>0.1</NORMALIZED_TIME_1> <WWISE_EVENT_2>autopilot_knob_push_button_off</WWISE_EVENT_2> <NORMALIZED_TIME_2>0.5</NORMALIZED_TIME_2> <WWISE_EVENT>autopilot_heading_knob</WWISE_EVENT> <COUNT>36</COUNT> <THRESHOLD_X_INPUT>0.01</THRESHOLD_X_INPUT> <THRESHOLD_X_MOUSE>0.001</THRESHOLD_X_MOUSE> <THRESHOLD_INPUT>0.01</THRESHOLD_INPUT> <THRESHOLD_MOUSE>0.001</THRESHOLD_MOUSE> <Condition Check="PUSH"> <TYPE>PUSH</TYPE> </Condition> <Switch Param="TYPE"> <Case Value="AIRBUS"> <HEADING_INDEX>3</HEADING_INDEX> </Case> <Default> <HEADING_INDEX>1</HEADING_INDEX> </Default> </Switch> </Parameters> <Parameters Type="Override"> <KNOB_ID>Heading</KNOB_ID> <Switch Param="TYPE"> <Case Value="PUSH"> <SET_STATE_EXTERNAL>1 -1 p0 0 > ? sp0 #HEADING_INDEX# (A:AUTOPILOT HEADING LOCK DIR:#HEADING_INDEX#, degrees) 1 l0 * + dnor (>K:2:HEADING_BUG_SET)</SET_STATE_EXTERNAL> <ADDITIONAL_EVENT_TYPE>PUSH</ADDITIONAL_EVENT_TYPE> <BTN_ID_EXTERNAL>Heading_Sync</BTN_ID_EXTERNAL> <BTN_SET_STATE_EXTERNAL>(A:HEADING INDICATOR, degrees) (>K:HEADING_BUG_SET)</BTN_SET_STATE_EXTERNAL> <TT_DESCRIPTION_ID_BTN>@TT_Package.AUTOPILOT_KNOB_HEADING_ACTION_SET_PUSH</TT_DESCRIPTION_ID_BTN> </Case> <Case Value="AIRBUS"> <SET_STATE_EXTERNAL> 1 -1 p0 0 > ? sp0 #HEADING_INDEX# (A:AUTOPILOT HEADING LOCK DIR:#HEADING_INDEX#, degrees) 1 l0 * + dnor (>K:2:HEADING_BUG_SET) p0 0 > if{ (>H:A320_Neo_CDU_AP_INC_HEADING) } els{ (>H:A320_Neo_CDU_AP_DEC_HEADING) } </SET_STATE_EXTERNAL> <ADDITIONAL_EVENT_TYPE>PUSH_PULL</ADDITIONAL_EVENT_TYPE> <BTN_ID_PULL>Heading_Selected</BTN_ID_PULL> <BTN_ID_PUSH>Heading_Managed</BTN_ID_PUSH> <DEFAULT_BINDING_STR>Select</DEFAULT_BINDING_STR> <PULL_SET_STATE_EXTERNAL>(>H:A320_Neo_CDU_MODE_SELECTED_HEADING)</PULL_SET_STATE_EXTERNAL> <PUSH_SET_STATE_EXTERNAL>(>H:A320_Neo_CDU_MODE_MANAGED_HEADING)</PUSH_SET_STATE_EXTERNAL> <TT_DESCRIPTION_ID_PULL>@TT_Package.AUTOPILOT_KNOB_HEADING_ACTION_SLT</TT_DESCRIPTION_ID_PULL> <TT_DESCRIPTION_ID_PUSH>@TT_Package.AUTOPILOT_KNOB_HEADING_ACTION_MAN</TT_DESCRIPTION_ID_PUSH> </Case> <Case Value="B747"> <SET_STATE_EXTERNAL>1 -1 p0 0 > ? sp0 #HEADING_INDEX# (A:AUTOPILOT HEADING LOCK DIR:#HEADING_INDEX#, degrees) 1 l0 * + dnor (>K:2:HEADING_BUG_SET)</SET_STATE_EXTERNAL> <ADDITIONAL_EVENT_TYPE>PUSH</ADDITIONAL_EVENT_TYPE> <BTN_ID_EXTERNAL>Heading_Sync</BTN_ID_EXTERNAL> <BTN_SET_STATE_EXTERNAL>(>H:B747_8_FMC_1_AP_HEADING_SEL)</BTN_SET_STATE_EXTERNAL> <TT_DESCRIPTION_ID_BTN>@TT_Package.AUTOPILOT_KNOB_HEADING_ACTION_SET_PUSH</TT_DESCRIPTION_ID_BTN> </Case> <Case Value="AS01B"> <SET_STATE_EXTERNAL>1 -1 p0 0 > ? sp0 #HEADING_INDEX# (A:AUTOPILOT HEADING LOCK DIR:#HEADING_INDEX#, degrees) 1 l0 * + dnor (>K:2:HEADING_BUG_SET)</SET_STATE_EXTERNAL> <ADDITIONAL_EVENT_TYPE>PUSH</ADDITIONAL_EVENT_TYPE> <BTN_ID_EXTERNAL>Heading_Sync</BTN_ID_EXTERNAL> <BTN_SET_STATE_EXTERNAL>(>H:AS01B_FMC_1_AP_HEADING_SEL)</BTN_SET_STATE_EXTERNAL> <TT_DESCRIPTION_ID_BTN>@TT_Package.AUTOPILOT_KNOB_HEADING_ACTION_SET_PUSH</TT_DESCRIPTION_ID_BTN> </Case> <Default> <ANIM_NAME>#ANIM_NAME_KNOB#</ANIM_NAME> <SET_STATE_EXTERNAL>1 -1 p0 0 > ? sp0 #HEADING_INDEX# (A:AUTOPILOT HEADING LOCK DIR:#HEADING_INDEX#, degrees) 1 l0 * + dnor (>K:2:HEADING_BUG_SET)</SET_STATE_EXTERNAL> </Default> </Switch> </Parameters> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <Switch Param="ADDITIONAL_EVENT_TYPE"> <Case Value="PUSH_PULL"> <UseTemplate Name="ASOBO_AUTOPILOT_Push_Event_Only_Template"> <BTN_ID>#BTN_ID_PULL#</BTN_ID> <EVENT_TYPE>PULL</EVENT_TYPE> <SET_STATE_EXTERNAL>#PULL_SET_STATE_EXTERNAL#</SET_STATE_EXTERNAL> <TT_DESCRIPTION_ID>#TT_DESCRIPTION_ID_PULL#</TT_DESCRIPTION_ID> <Condition Valid="TT_DESCRIPTION_ID_PULL_IS_DYNAMIC"> <TT_DESCRIPTION_IS_DYNAMIC>#TT_DESCRIPTION_ID_PULL_IS_DYNAMIC#</TT_DESCRIPTION_IS_DYNAMIC> </Condition> </UseTemplate> <UseTemplate Name="ASOBO_AUTOPILOT_Push_Event_Only_Template"> <BTN_ID>#BTN_ID_PUSH#</BTN_ID> <EVENT_TYPE>PUSH</EVENT_TYPE> <SET_STATE_EXTERNAL>#PUSH_SET_STATE_EXTERNAL#</SET_STATE_EXTERNAL> <TT_DESCRIPTION_ID>#TT_DESCRIPTION_ID_PUSH#</TT_DESCRIPTION_ID> <Condition Valid="TT_DESCRIPTION_ID_PUSH_IS_DYNAMIC"> <TT_DESCRIPTION_IS_DYNAMIC>#TT_DESCRIPTION_ID_PUSH_IS_DYNAMIC#</TT_DESCRIPTION_IS_DYNAMIC> </Condition> </UseTemplate> </Case> <Case Value="PUSH"> <UseTemplate Name="ASOBO_AUTOPILOT_Push_Event_Only_Template"> <BTN_ID>#BTN_ID_EXTERNAL#</BTN_ID> <EVENT_TYPE>PUSH</EVENT_TYPE> <SET_STATE_EXTERNAL>#BTN_SET_STATE_EXTERNAL#</SET_STATE_EXTERNAL> <TT_DESCRIPTION_ID>#TT_DESCRIPTION_ID_BTN#</TT_DESCRIPTION_ID> </UseTemplate> </Case> </Switch> <UseTemplate Name="ASOBO_AUTOPILOT_Knob_Template"> <TT_DESCRIPTION_ID>@TT_Package.AUTOPILOT_KNOB_HEADING_ACTION_SET_ADJUST</TT_DESCRIPTION_ID> <TOOLTIP_TITLE>@TT_Package.AUTOPILOT_KNOB_HEADING_TITLE</TOOLTIP_TITLE> <GET_TT_VALUE_STATE>(A:AUTOPILOT HEADING LOCK DIR:#HEADING_INDEX#, degrees) sp0</GET_TT_VALUE_STATE> <FORMAT_VALUE>l0 '%d°' @sprintf</FORMAT_VALUE> <Switch Param="ADDITIONAL_EVENT_TYPE"> <Case Value="PUSH_PULL"> <TEMPLATE_VARIANT>_PushPull</TEMPLATE_VARIANT> <PULL_CODE>(>B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID_PULL#_#DEFAULT_BINDING_STR#)</PULL_CODE> <PUSH_CODE>(>B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID_PUSH#_#DEFAULT_BINDING_STR#)</PUSH_CODE> <TOOLTIP_ENTRY_1>#INPUT_EVENT_ID_SOURCE#_#BTN_ID_PULL#</TOOLTIP_ENTRY_1> <TOOLTIP_ENTRY_2>#INPUT_EVENT_ID_SOURCE#_#BTN_ID_PUSH#</TOOLTIP_ENTRY_2> </Case> </Switch> </UseTemplate> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- INPUT_EVENT_ID_SOURCE
- ANIM_NAME_KNOB (using SUFFIX_ID)
- ANIM_NAME_PUSH (using SUFFIX_ID)
- ANIM_NAME_PUSHPULL (using SUFFIX_ID)
- PART_ID
- NODE_ID (using SUFFIX_ID)
- WWISE_EVENT_1
- NORMALIZED_TIME_1
- WWISE_EVENT_2
- NORMALIZED_TIME_2
- WWISE_EVENT
- COUNT
- THRESHOLD_X_INPUT
- THRESHOLD_X_MOUSE
- THRESHOLD_INPUT
- THRESHOLD_MOUSE
Condition: Check(PUSH)
-
Case: True
Parameters set:
- TYPE
Condition: Switch(TYPE)
-
Case: AIRBUS
Parameters set:
- HEADING_INDEX
-
Default case:
Parameters set:
- HEADING_INDEX
-
Override
Parameters set:
- KNOB_ID
Condition: Switch(TYPE)
-
Case: PUSH
Parameters set:
- SET_STATE_EXTERNAL (using HEADING_INDEX)
- ADDITIONAL_EVENT_TYPE
- BTN_ID_EXTERNAL
- BTN_SET_STATE_EXTERNAL
- TT_DESCRIPTION_ID_BTN
-
Case: AIRBUS
Parameters set:
- SET_STATE_EXTERNAL (using HEADING_INDEX)
- ADDITIONAL_EVENT_TYPE
- BTN_ID_PULL
- BTN_ID_PUSH
- DEFAULT_BINDING_STR
- PULL_SET_STATE_EXTERNAL
- PUSH_SET_STATE_EXTERNAL
- TT_DESCRIPTION_ID_PULL
- TT_DESCRIPTION_ID_PUSH
-
Case: B747
Parameters set:
- SET_STATE_EXTERNAL (using HEADING_INDEX)
- ADDITIONAL_EVENT_TYPE
- BTN_ID_EXTERNAL
- BTN_SET_STATE_EXTERNAL
- TT_DESCRIPTION_ID_BTN
-
Case: AS01B
Parameters set:
- SET_STATE_EXTERNAL (using HEADING_INDEX)
- ADDITIONAL_EVENT_TYPE
- BTN_ID_EXTERNAL
- BTN_SET_STATE_EXTERNAL
- TT_DESCRIPTION_ID_BTN
-
Default case:
Parameters set:
- ANIM_NAME (using ANIM_NAME_KNOB)
- SET_STATE_EXTERNAL (using HEADING_INDEX)
Parameters read:
- NODE_ID
Components:
-
#NODE_ID# (Node: #NODE_ID#)
Templates used:
-
ASOBO_AUTOPILOT_Knob_Template
-
May include a subtemplate using the parameter 'TEMPLATE_TO_CALL' and resolve to the following template(s):
- ASOBO_GT_Switch_XStates
- ASOBO_GT_Knob_#KNOB_TYPE##TEMPLATE_VARIANT#
Parameters set:
- TT_DESCRIPTION_ID
- TOOLTIP_TITLE
- GET_TT_VALUE_STATE (using HEADING_INDEX)
- FORMAT_VALUE
Condition: Switch(ADDITIONAL_EVENT_TYPE)
-
Case: PUSH_PULL
Parameters set:
- TEMPLATE_VARIANT
- PULL_CODE (using INPUT_EVENT_ID_SOURCE, BTN_ID_PULL, DEFAULT_BINDING_STR)
- PUSH_CODE (using INPUT_EVENT_ID_SOURCE, BTN_ID_PUSH, DEFAULT_BINDING_STR)
- TOOLTIP_ENTRY_1 (using INPUT_EVENT_ID_SOURCE, BTN_ID_PULL)
- TOOLTIP_ENTRY_2 (using INPUT_EVENT_ID_SOURCE, BTN_ID_PUSH)
-
May include a subtemplate using the parameter 'TEMPLATE_TO_CALL' and resolve to the following template(s):
Condition: Switch(ADDITIONAL_EVENT_TYPE)
-
Case: PUSH_PULL
Templates used:
-
ASOBO_AUTOPILOT_Push_Event_Only_Template
Parameters set:
- BTN_ID (using BTN_ID_PULL)
- EVENT_TYPE
- SET_STATE_EXTERNAL (using PULL_SET_STATE_EXTERNAL)
- TT_DESCRIPTION_ID (using TT_DESCRIPTION_ID_PULL)
Condition: Valid(TT_DESCRIPTION_ID_PULL_IS_DYNAMIC)
-
Case: True
Parameters set:
- TT_DESCRIPTION_IS_DYNAMIC (using TT_DESCRIPTION_ID_PULL_IS_DYNAMIC)
-
ASOBO_AUTOPILOT_Push_Event_Only_Template
Parameters set:
- BTN_ID (using BTN_ID_PUSH)
- EVENT_TYPE
- SET_STATE_EXTERNAL (using PUSH_SET_STATE_EXTERNAL)
- TT_DESCRIPTION_ID (using TT_DESCRIPTION_ID_PUSH)
Condition: Valid(TT_DESCRIPTION_ID_PUSH_IS_DYNAMIC)
-
Case: True
Parameters set:
- TT_DESCRIPTION_IS_DYNAMIC (using TT_DESCRIPTION_ID_PUSH_IS_DYNAMIC)
-
ASOBO_AUTOPILOT_Push_Event_Only_Template
-
Case: PUSH
Templates used:
-
ASOBO_AUTOPILOT_Push_Event_Only_Template
Parameters set:
- BTN_ID (using BTN_ID_EXTERNAL)
- EVENT_TYPE
- SET_STATE_EXTERNAL (using BTN_SET_STATE_EXTERNAL)
- TT_DESCRIPTION_ID (using TT_DESCRIPTION_ID_BTN)
-
ASOBO_AUTOPILOT_Push_Event_Only_Template
-
ASOBO_AUTOPILOT_Knob_Template
-
Default
-
ASOBO_AUTOPILOT_Knob_Altitude_SubTemplate
Definition from XML<Template Name="ASOBO_AUTOPILOT_Knob_Altitude_SubTemplate"> <Parameters Type="Override"> <Condition Check="PUSH"> <TYPE>PUSH</TYPE> </Condition> </Parameters> <Parameters Type="Default"> <INPUT_EVENT_ID_SOURCE>AUTOPILOT</INPUT_EVENT_ID_SOURCE> <PART_ID>AUTOPILOT_Knob_Altitude</PART_ID> <Condition Check="INCREMENT"> <True> <NODE_ID>AUTOPILOT_Knob_Altitude_#INCREMENT##SUFFIX_ID#</NODE_ID> <ANIM_NAME>AUTOPILOT_Knob_Altitude_#INCREMENT##SUFFIX_ID#</ANIM_NAME> <Condition Check="TYPE" Match="PUSH"> <ANIM_NAME_KNOB>AUTOPILOT_Knob_Altitude_#INCREMENT##SUFFIX_ID#</ANIM_NAME_KNOB> <ANIM_NAME_PUSH>AUTOPILOT_Knob_Altitude_#INCREMENT#_Push#SUFFIX_ID#</ANIM_NAME_PUSH> </Condition> <WWISE_EVENT>autopilot_altitude_#INCREMENT#_knob</WWISE_EVENT> <COUNT>36</COUNT> <THRESHOLD_INPUT>0.0001</THRESHOLD_INPUT> <THRESHOLD_MOUSE>0.003</THRESHOLD_MOUSE> <INCREMENT_IN_KNOB_ID/> </True> <False> <Condition> <Test> <Or> <Arg Check="TYPE" Match="AIRBUS"/> <Arg Check="TYPE" Match="AS01B"/> </Or> </Test> <False> <IS_DYN_INCREMENT>True</IS_DYN_INCREMENT> </False> </Condition> <Condition Check="INCREMENT"> <False> <INCREMENT_VAR>XMLVAR_Autopilot_Altitude_Increment</INCREMENT_VAR> </False> </Condition> <INCREMENT>(L:XMLVAR_Autopilot_Altitude_Increment)</INCREMENT> <SET_INCREMENT>(>L:XMLVAR_Autopilot_Altitude_Increment)</SET_INCREMENT> <DYN_INCREMENT_INIT>100</DYN_INCREMENT_INIT> <NODE_ID>AUTOPILOT_Knob_Altitude#SUFFIX_ID#</NODE_ID> <ANIM_NAME>AUTOPILOT_Knob_Altitude#SUFFIX_ID#</ANIM_NAME> <WWISE_EVENT>autopilot_altitude_knob</WWISE_EVENT> <COUNT>36</COUNT> <THRESHOLD_X_INPUT>0.05</THRESHOLD_X_INPUT> <THRESHOLD_X_MOUSE>0.01</THRESHOLD_X_MOUSE> <Switch Param="TYPE"> <Case Value="AIRBUS"> <ANIM_NAME_PUSHPULL>AUTOPILOT_Knob_Altitude_PushPull#SUFFIX_ID#</ANIM_NAME_PUSHPULL> </Case> <Case Value="PUSH"> <ANIM_NAME_KNOB>AUTOPILOT_Knob_Altitude#SUFFIX_ID#</ANIM_NAME_KNOB> <ANIM_NAME_PUSH>AUTOPILOT_Knob_Altitude_Push#SUFFIX_ID#</ANIM_NAME_PUSH> <ALT_PUSH_TYPE>ALT_SYNC</ALT_PUSH_TYPE> </Case> </Switch> </False> </Condition> <Switch Param="TYPE"> <Case Value="AIRBUS"> <HEADING_INDEX>3</HEADING_INDEX> </Case> <Case Value="B747"> <HEADING_INDEX>3</HEADING_INDEX> </Case> <Case Value="AS01B"> <HEADING_INDEX>3</HEADING_INDEX> </Case> <Default> <HEADING_INDEX>0</HEADING_INDEX> </Default> </Switch> <WWISE_EVENT_1>autopilot_knob_push_button_on</WWISE_EVENT_1> <NORMALIZED_TIME_1>0.1</NORMALIZED_TIME_1> <WWISE_EVENT_2>autopilot_knob_push_button_off</WWISE_EVENT_2> <NORMALIZED_TIME_2>0.3</NORMALIZED_TIME_2> <Switch Param="ALT_PUSH_TYPE"> <Case Value="ALT_FINE_TUNE"> <FINE_TUNE_INCREMENT>100</FINE_TUNE_INCREMENT> </Case> </Switch> </Parameters> <Parameters Type="Override"> <Condition Check="INCREMENT_IN_KNOB_ID"> <True> <KNOB_ID>Altitude_#INCREMENT#</KNOB_ID> </True> <False> <KNOB_ID>Altitude</KNOB_ID> </False> </Condition> <Switch Param="TYPE"> <Case Value="PUSH"> <SET_STATE_EXTERNAL> 1 -1 p0 0 > ? sp0 #HEADING_INDEX# (A:AUTOPILOT ALTITUDE LOCK VAR:#HEADING_INDEX#, feet) #INCREMENT# l0 * + (>K:2:AP_ALT_VAR_SET_ENGLISH) p0 0 > if{ (>H:AP_KNOB_Up) } els{ (>H:AP_KNOB_Down) } </SET_STATE_EXTERNAL> <ADDITIONAL_EVENT_TYPE>PUSH</ADDITIONAL_EVENT_TYPE> <Switch Param="ALT_PUSH_TYPE"> <Case Value="ALT_SYNC"> <BTN_ID_EXTERNAL>Altitude_Sync</BTN_ID_EXTERNAL> <BTN_SET_STATE_EXTERNAL>(A:INDICATED ALTITUDE, feet) (>K:AP_ALT_VAR_SET_ENGLISH) (>H:AP_KNOB)</BTN_SET_STATE_EXTERNAL> <TT_DESCRIPTION_ID_BTN>@TT_Package.AUTOPILOT_KNOB_ALTITUDESELECTED_ACTION_PUSH</TT_DESCRIPTION_ID_BTN> </Case> <Case Value="ALT_FINE_TUNE"> <BTN_ID_EXTERNAL>Altitude_Fine_Tune</BTN_ID_EXTERNAL> <BTN_SET_STATE_EXTERNAL>#FINE_TUNE_INCREMENT# #DYN_INCREMENT_INIT# #INCREMENT# #FINE_TUNE_INCREMENT# != ? #SET_INCREMENT#</BTN_SET_STATE_EXTERNAL> <TT_DESCRIPTION_ID_BTN>@TT_Package.AUTOPILOT_KNOB_ALTITUDE_INCREMENT_ACTION</TT_DESCRIPTION_ID_BTN> <PUSH_ANIM_HANDLED_SEPARATELY>True</PUSH_ANIM_HANDLED_SEPARATELY> <BTN_ANIM_CODE>#INCREMENT# #FINE_TUNE_INCREMENT# == 100 *</BTN_ANIM_CODE> <BTN_LOCAL_VAR_TO_WATCH_0>#INCREMENT_VAR#</BTN_LOCAL_VAR_TO_WATCH_0> <BTN_VALUE_CODE>#INCREMENT# #FINE_TUNE_INCREMENT# ==</BTN_VALUE_CODE> <BTN_TT_VALUE_ON>'100'</BTN_TT_VALUE_ON> <BTN_TT_VALUE_OFF>'1000'</BTN_TT_VALUE_OFF> </Case> </Switch> </Case> <Case Value="AIRBUS"> <SET_STATE_EXTERNAL> 1 -1 p0 0 > ? sp0 #HEADING_INDEX# (A:AUTOPILOT ALTITUDE LOCK VAR:#HEADING_INDEX#, feet) #INCREMENT# l0 * + (>K:2:AP_ALT_VAR_SET_ENGLISH) p0 0 > if{ (>H:AP_KNOB_Up) (>H:A320_Neo_CDU_AP_INC_ALT) } els{ (>H:AP_KNOB_Down) (>H:A320_Neo_CDU_AP_DEC_ALT) } </SET_STATE_EXTERNAL> <ADDITIONAL_EVENT_TYPE>PUSH_PULL</ADDITIONAL_EVENT_TYPE> <BTN_ID_PULL>Altitude_Selected</BTN_ID_PULL> <BTN_ID_PUSH>Altitude_Managed</BTN_ID_PUSH> <DEFAULT_BINDING_STR>Mode</DEFAULT_BINDING_STR> <PULL_SET_STATE_EXTERNAL>(>H:A320_Neo_CDU_MODE_SELECTED_ALTITUDE)</PULL_SET_STATE_EXTERNAL> <PUSH_SET_STATE_EXTERNAL>(>H:A320_Neo_CDU_MODE_MANAGED_ALTITUDE)</PUSH_SET_STATE_EXTERNAL> <TT_DESCRIPTION_ID_PULL>@TT_Package.AUTOPILOT_PUSH_ALTITUDE_ACTION_SLT</TT_DESCRIPTION_ID_PULL> <TT_DESCRIPTION_ID_PUSH>@TT_Package.AUTOPILOT_PUSH_ALTITUDE_ACTION_MAN</TT_DESCRIPTION_ID_PUSH> </Case> <Case Value="B747"> <SET_STATE_EXTERNAL>p0 0 > if{ #HEADING_INDEX# 0 (>K:2:AP_ALT_VAR_INC) (>H:AP_KNOB_Up) } els{ #HEADING_INDEX# 0 (>K:2:AP_ALT_VAR_DEC) (>H:AP_KNOB_Down) }</SET_STATE_EXTERNAL> <ADDITIONAL_EVENT_TYPE>PUSH</ADDITIONAL_EVENT_TYPE> <BTN_ID_EXTERNAL>Altitude_Sync</BTN_ID_EXTERNAL> <BTN_SET_STATE_EXTERNAL>(>H:B747_8_FMC_1_AP_ALT_INTERVENTION)</BTN_SET_STATE_EXTERNAL> <TT_DESCRIPTION_ID_BTN>@TT_Package.AUTOPILOT_KNOB_ALTITUDESELECTED_ACTION_PUSH</TT_DESCRIPTION_ID_BTN> </Case> <Case Value="AS01B"> <SET_STATE_EXTERNAL> 1 -1 p0 0 > ? sp0 #HEADING_INDEX# (A:AUTOPILOT ALTITUDE LOCK VAR:#HEADING_INDEX#, feet) #INCREMENT# l0 * + (>K:2:AP_ALT_VAR_SET_ENGLISH) p0 0 > if{ (>H:AP_KNOB_Up) } els{ (>H:AP_KNOB_Down) } </SET_STATE_EXTERNAL> <ADDITIONAL_EVENT_TYPE>PUSH</ADDITIONAL_EVENT_TYPE> <BTN_ID_EXTERNAL>Altitude_Sync</BTN_ID_EXTERNAL> <BTN_SET_STATE_EXTERNAL>(>H:AS01B_FMC_1_AP_ALT_INTERVENTION)</BTN_SET_STATE_EXTERNAL> <TT_DESCRIPTION_ID_BTN>@TT_Package.AUTOPILOT_KNOB_ALTITUDESELECTED_ACTION_PUSH</TT_DESCRIPTION_ID_BTN> </Case> <Default> <SET_STATE_EXTERNAL> 1 -1 p0 0 > ? sp0 #HEADING_INDEX# (A:AUTOPILOT ALTITUDE LOCK VAR:#HEADING_INDEX#, feet) #INCREMENT# l0 * + (>K:2:AP_ALT_VAR_SET_ENGLISH) p0 0 > if{ (>H:AP_KNOB_Up) } els{ (>H:AP_KNOB_Down) } </SET_STATE_EXTERNAL> </Default> </Switch> </Parameters> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <Condition Valid="IS_DYN_INCREMENT"> <UseTemplate Name="ASOBO_GT_Update"> <UPDATE_ONCE>True</UPDATE_ONCE> <UPDATE_CODE>#DYN_INCREMENT_INIT# #SET_INCREMENT#</UPDATE_CODE> </UseTemplate> </Condition> <Switch Param="ADDITIONAL_EVENT_TYPE"> <Case Value="PUSH_PULL"> <UseTemplate Name="ASOBO_AUTOPILOT_Push_Event_Only_Template"> <BTN_ID>#BTN_ID_PULL#</BTN_ID> <EVENT_TYPE>PULL</EVENT_TYPE> <SET_STATE_EXTERNAL>#PULL_SET_STATE_EXTERNAL#</SET_STATE_EXTERNAL> <TT_DESCRIPTION_ID>#TT_DESCRIPTION_ID_PULL#</TT_DESCRIPTION_ID> <Condition Valid="TT_DESCRIPTION_ID_PULL_IS_DYNAMIC"> <TT_DESCRIPTION_IS_DYNAMIC>#TT_DESCRIPTION_ID_PULL_IS_DYNAMIC#</TT_DESCRIPTION_IS_DYNAMIC> </Condition> </UseTemplate> <UseTemplate Name="ASOBO_AUTOPILOT_Push_Event_Only_Template"> <BTN_ID>#BTN_ID_PUSH#</BTN_ID> <EVENT_TYPE>PUSH</EVENT_TYPE> <SET_STATE_EXTERNAL>#PUSH_SET_STATE_EXTERNAL#</SET_STATE_EXTERNAL> <TT_DESCRIPTION_ID>#TT_DESCRIPTION_ID_PUSH#</TT_DESCRIPTION_ID> <Condition Valid="TT_DESCRIPTION_ID_PUSH_IS_DYNAMIC"> <TT_DESCRIPTION_IS_DYNAMIC>#TT_DESCRIPTION_ID_PUSH_IS_DYNAMIC#</TT_DESCRIPTION_IS_DYNAMIC> </Condition> </UseTemplate> </Case> <Case Value="PUSH"> <UseTemplate Name="ASOBO_AUTOPILOT_Push_Event_Only_Template"> <BTN_ID>#BTN_ID_EXTERNAL#</BTN_ID> <EVENT_TYPE>PUSH</EVENT_TYPE> <SET_STATE_EXTERNAL>#BTN_SET_STATE_EXTERNAL#</SET_STATE_EXTERNAL> <TT_DESCRIPTION_ID>#TT_DESCRIPTION_ID_BTN#</TT_DESCRIPTION_ID> <Condition NotEmpty="BTN_VALUE_CODE"> <VALUE_CODE>#BTN_VALUE_CODE#</VALUE_CODE> <TT_VALUE>#BTN_VALUE_CODE# if{ #BTN_TT_VALUE_ON# } els{ #BTN_TT_VALUE_OFF# }</TT_VALUE> <TT_VALUE_IS_DYNAMIC>True</TT_VALUE_IS_DYNAMIC> </Condition> <Condition NotEmpty="BTN_LOCAL_VAR_TO_WATCH_0"> <LOCAL_VAR_TO_WATCH_0>#BTN_LOCAL_VAR_TO_WATCH_0#</LOCAL_VAR_TO_WATCH_0> </Condition> </UseTemplate> <Condition NotEmpty="PUSH_ANIM_HANDLED_SEPARATELY"> <UseTemplate Name="ASOBO_GT_Anim_Code"> <ANIM_CODE>#BTN_ANIM_CODE#</ANIM_CODE> <ANIM_NAME>#ANIM_NAME_PUSH#</ANIM_NAME> <ANIM_LAG>100</ANIM_LAG> </UseTemplate> </Condition> </Case> </Switch> <UseTemplate Name="ASOBO_AUTOPILOT_Knob_Template"> <BINDING_INC_0>Inc_Event</BINDING_INC_0> <BINDING_INC_0_PARAM_0>1</BINDING_INC_0_PARAM_0> <BINDING_INC_0_EVENT_ID>AP_ALT_VAR_INC</BINDING_INC_0_EVENT_ID> <BINDING_INC_0_EVENT_ID_ONLY>True</BINDING_INC_0_EVENT_ID_ONLY> <BINDING_DEC_0>Dec_Event</BINDING_DEC_0> <BINDING_DEC_0_PARAM_0>1</BINDING_DEC_0_PARAM_0> <BINDING_DEC_0_EVENT_ID>AP_ALT_VAR_DEC</BINDING_DEC_0_EVENT_ID> <BINDING_DEC_0_EVENT_ID_ONLY>True</BINDING_DEC_0_EVENT_ID_ONLY> <TT_DESCRIPTION_ID>@TT_Package.AUTOPILOT_KNOB_ALTITUDESELECTED_ACTION_ADJUST</TT_DESCRIPTION_ID> <TOOLTIP_TITLE>@TT_Package.AUTOPILOT_KNOB_ALTITUDESELECTED_TITLE</TOOLTIP_TITLE> <GET_TT_VALUE_STATE>(A:AUTOPILOT ALTITUDE LOCK VAR:#HEADING_INDEX#, feet) sp0</GET_TT_VALUE_STATE> <FORMAT_VALUE>l0 '%d ft' @sprintf</FORMAT_VALUE> <Switch Param="ADDITIONAL_EVENT_TYPE"> <Case Value="PUSH_PULL"> <TEMPLATE_VARIANT>_PushPull</TEMPLATE_VARIANT> <PULL_CODE>(>B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID_PULL#_#DEFAULT_BINDING_STR#)</PULL_CODE> <PUSH_CODE>(>B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID_PUSH#_#DEFAULT_BINDING_STR#)</PUSH_CODE> <TOOLTIP_ENTRY_1>#INPUT_EVENT_ID_SOURCE#_#BTN_ID_PULL#</TOOLTIP_ENTRY_1> <TOOLTIP_ENTRY_2>#INPUT_EVENT_ID_SOURCE#_#BTN_ID_PUSH#</TOOLTIP_ENTRY_2> </Case> </Switch> </UseTemplate> <Condition Check="EMISSIVE_KNOB"> <UseTemplate Name="ASOBO_GT_Emissive_Gauge"/> </Condition> </Component> </Template>Parameters initialization:
-
Override
Condition: Check(PUSH)
-
Case: True
Parameters set:
- TYPE
-
-
Default
Parameters set:
- INPUT_EVENT_ID_SOURCE
- PART_ID
- WWISE_EVENT_1
- NORMALIZED_TIME_1
- WWISE_EVENT_2
- NORMALIZED_TIME_2
Condition: Check(INCREMENT)
-
Case: True
Parameters set:
- NODE_ID (using INCREMENT, SUFFIX_ID)
- ANIM_NAME (using INCREMENT, SUFFIX_ID)
- WWISE_EVENT (using INCREMENT)
- COUNT
- THRESHOLD_INPUT
- THRESHOLD_MOUSE
- INCREMENT_IN_KNOB_ID
Condition: Check(TYPE)
-
Case: True
Parameters set:
- ANIM_NAME_KNOB (using INCREMENT, SUFFIX_ID)
- ANIM_NAME_PUSH (using INCREMENT, SUFFIX_ID)
-
Case: False
Parameters set:
- INCREMENT
- SET_INCREMENT
- DYN_INCREMENT_INIT
- NODE_ID (using SUFFIX_ID)
- ANIM_NAME (using SUFFIX_ID)
- WWISE_EVENT
- COUNT
- THRESHOLD_X_INPUT
- THRESHOLD_X_MOUSE
Condition: Test(TYPE, TYPE)
-
Case: False
Parameters set:
- IS_DYN_INCREMENT
Condition: Check(INCREMENT)
-
Case: False
Parameters set:
- INCREMENT_VAR
Condition: Switch(TYPE)
-
Case: AIRBUS
Parameters set:
- ANIM_NAME_PUSHPULL (using SUFFIX_ID)
-
Case: PUSH
Parameters set:
- ANIM_NAME_KNOB (using SUFFIX_ID)
- ANIM_NAME_PUSH (using SUFFIX_ID)
- ALT_PUSH_TYPE
Condition: Switch(TYPE)
-
Case: AIRBUS
Parameters set:
- HEADING_INDEX
-
Case: B747
Parameters set:
- HEADING_INDEX
-
Case: AS01B
Parameters set:
- HEADING_INDEX
-
Default case:
Parameters set:
- HEADING_INDEX
Condition: Switch(ALT_PUSH_TYPE)
-
Case: ALT_FINE_TUNE
Parameters set:
- FINE_TUNE_INCREMENT
-
Override
Condition: Check(INCREMENT_IN_KNOB_ID)
-
Case: True
Parameters set:
- KNOB_ID (using INCREMENT)
-
Case: False
Parameters set:
- KNOB_ID
Condition: Switch(TYPE)
-
Case: PUSH
Parameters set:
- SET_STATE_EXTERNAL (using HEADING_INDEX, INCREMENT)
- ADDITIONAL_EVENT_TYPE
Condition: Switch(ALT_PUSH_TYPE)
-
Case: ALT_SYNC
Parameters set:
- BTN_ID_EXTERNAL
- BTN_SET_STATE_EXTERNAL
- TT_DESCRIPTION_ID_BTN
-
Case: ALT_FINE_TUNE
Parameters set:
- BTN_ID_EXTERNAL
- BTN_SET_STATE_EXTERNAL (using FINE_TUNE_INCREMENT, DYN_INCREMENT_INIT, INCREMENT, SET_INCREMENT)
- TT_DESCRIPTION_ID_BTN
- PUSH_ANIM_HANDLED_SEPARATELY
- BTN_ANIM_CODE (using INCREMENT, FINE_TUNE_INCREMENT)
- BTN_LOCAL_VAR_TO_WATCH_0 (using INCREMENT_VAR)
- BTN_VALUE_CODE (using INCREMENT, FINE_TUNE_INCREMENT)
- BTN_TT_VALUE_ON
- BTN_TT_VALUE_OFF
-
Case: AIRBUS
Parameters set:
- SET_STATE_EXTERNAL (using HEADING_INDEX, INCREMENT)
- ADDITIONAL_EVENT_TYPE
- BTN_ID_PULL
- BTN_ID_PUSH
- DEFAULT_BINDING_STR
- PULL_SET_STATE_EXTERNAL
- PUSH_SET_STATE_EXTERNAL
- TT_DESCRIPTION_ID_PULL
- TT_DESCRIPTION_ID_PUSH
-
Case: B747
Parameters set:
- SET_STATE_EXTERNAL (using HEADING_INDEX)
- ADDITIONAL_EVENT_TYPE
- BTN_ID_EXTERNAL
- BTN_SET_STATE_EXTERNAL
- TT_DESCRIPTION_ID_BTN
-
Case: AS01B
Parameters set:
- SET_STATE_EXTERNAL (using HEADING_INDEX, INCREMENT)
- ADDITIONAL_EVENT_TYPE
- BTN_ID_EXTERNAL
- BTN_SET_STATE_EXTERNAL
- TT_DESCRIPTION_ID_BTN
-
Default case:
Parameters set:
- SET_STATE_EXTERNAL (using HEADING_INDEX, INCREMENT)
-
Parameters read:
- NODE_ID
Components:
-
#NODE_ID# (Node: #NODE_ID#)
Templates used:
-
ASOBO_AUTOPILOT_Knob_Template
-
May include a subtemplate using the parameter 'TEMPLATE_TO_CALL' and resolve to the following template(s):
- ASOBO_GT_Switch_XStates
- ASOBO_GT_Knob_#KNOB_TYPE##TEMPLATE_VARIANT#
Parameters set:
- BINDING_INC_0
- BINDING_INC_0_PARAM_0
- BINDING_INC_0_EVENT_ID
- BINDING_INC_0_EVENT_ID_ONLY
- BINDING_DEC_0
- BINDING_DEC_0_PARAM_0
- BINDING_DEC_0_EVENT_ID
- BINDING_DEC_0_EVENT_ID_ONLY
- TT_DESCRIPTION_ID
- TOOLTIP_TITLE
- GET_TT_VALUE_STATE (using HEADING_INDEX)
- FORMAT_VALUE
Condition: Switch(ADDITIONAL_EVENT_TYPE)
-
Case: PUSH_PULL
Parameters set:
- TEMPLATE_VARIANT
- PULL_CODE (using INPUT_EVENT_ID_SOURCE, BTN_ID_PULL, DEFAULT_BINDING_STR)
- PUSH_CODE (using INPUT_EVENT_ID_SOURCE, BTN_ID_PUSH, DEFAULT_BINDING_STR)
- TOOLTIP_ENTRY_1 (using INPUT_EVENT_ID_SOURCE, BTN_ID_PULL)
- TOOLTIP_ENTRY_2 (using INPUT_EVENT_ID_SOURCE, BTN_ID_PUSH)
-
May include a subtemplate using the parameter 'TEMPLATE_TO_CALL' and resolve to the following template(s):
Condition: Valid(IS_DYN_INCREMENT)
-
Case: True
Templates used:
-
ASOBO_GT_Update
Parameters set:
- UPDATE_ONCE
- UPDATE_CODE (using DYN_INCREMENT_INIT, SET_INCREMENT)
-
ASOBO_GT_Update
Condition: Switch(ADDITIONAL_EVENT_TYPE)
-
Case: PUSH_PULL
Templates used:
-
ASOBO_AUTOPILOT_Push_Event_Only_Template
Parameters set:
- BTN_ID (using BTN_ID_PULL)
- EVENT_TYPE
- SET_STATE_EXTERNAL (using PULL_SET_STATE_EXTERNAL)
- TT_DESCRIPTION_ID (using TT_DESCRIPTION_ID_PULL)
Condition: Valid(TT_DESCRIPTION_ID_PULL_IS_DYNAMIC)
-
Case: True
Parameters set:
- TT_DESCRIPTION_IS_DYNAMIC (using TT_DESCRIPTION_ID_PULL_IS_DYNAMIC)
-
ASOBO_AUTOPILOT_Push_Event_Only_Template
Parameters set:
- BTN_ID (using BTN_ID_PUSH)
- EVENT_TYPE
- SET_STATE_EXTERNAL (using PUSH_SET_STATE_EXTERNAL)
- TT_DESCRIPTION_ID (using TT_DESCRIPTION_ID_PUSH)
Condition: Valid(TT_DESCRIPTION_ID_PUSH_IS_DYNAMIC)
-
Case: True
Parameters set:
- TT_DESCRIPTION_IS_DYNAMIC (using TT_DESCRIPTION_ID_PUSH_IS_DYNAMIC)
-
ASOBO_AUTOPILOT_Push_Event_Only_Template
-
Case: PUSH
Templates used:
-
ASOBO_AUTOPILOT_Push_Event_Only_Template
Parameters set:
- BTN_ID (using BTN_ID_EXTERNAL)
- EVENT_TYPE
- SET_STATE_EXTERNAL (using BTN_SET_STATE_EXTERNAL)
- TT_DESCRIPTION_ID (using TT_DESCRIPTION_ID_BTN)
Condition: NotEmpty(BTN_VALUE_CODE)
-
Case: True
Parameters set:
- VALUE_CODE (using BTN_VALUE_CODE)
- TT_VALUE (using BTN_VALUE_CODE, BTN_TT_VALUE_ON, BTN_TT_VALUE_OFF)
- TT_VALUE_IS_DYNAMIC
Condition: NotEmpty(BTN_LOCAL_VAR_TO_WATCH_0)
-
Case: True
Parameters set:
- LOCAL_VAR_TO_WATCH_0 (using BTN_LOCAL_VAR_TO_WATCH_0)
Condition: NotEmpty(PUSH_ANIM_HANDLED_SEPARATELY)
-
Case: True
Templates used:
-
ASOBO_GT_Anim_Code
Parameters set:
- ANIM_CODE (using BTN_ANIM_CODE)
- ANIM_NAME (using ANIM_NAME_PUSH)
- ANIM_LAG
-
ASOBO_GT_Anim_Code
-
ASOBO_AUTOPILOT_Push_Event_Only_Template
Condition: Check(EMISSIVE_KNOB)
-
Case: True
Templates used:
-
ASOBO_AUTOPILOT_Knob_Template
-
Override
-
ASOBO_AUTOPILOT_Knob_Course_SubTemplate
Definition from XML<Template Name="ASOBO_AUTOPILOT_Knob_Course_SubTemplate"> <Parameters Type="Override"> <Condition Check="PUSH"> <TYPE>PUSH</TYPE> </Condition> </Parameters> <Parameters Type="Default"> <ANIM_NAME>AUTOPILOT_Knob_Course_#ID##SUFFIX_ID#</ANIM_NAME> <Condition Check="TYPE" Match="PUSH"> <ANIM_NAME_PUSH>AUTOPILOT_Knob_Course_#ID#_push#SUFFIX_ID#</ANIM_NAME_PUSH> </Condition> <NODE_ID>AUTOPILOT_Knob_Course_#ID##SUFFIX_ID#</NODE_ID> <PART_ID>AUTOPILOT_Knob_Course</PART_ID> <COUNT>72</COUNT> <Condition Valid="DYNAMIC_VOR_ID"> <VOR_ID_1_SELECTED_CHECK>1</VOR_ID_1_SELECTED_CHECK> <ID_1>#ID#</ID_1> <ID_2>#ID#</ID_2> </Condition> <THRESHOLD_X_INPUT>0.01</THRESHOLD_X_INPUT> <THRESHOLD_X_MOUSE>0.002</THRESHOLD_X_MOUSE> <THRESHOLD_INPUT>0.01</THRESHOLD_INPUT> <THRESHOLD_MOUSE>0.002</THRESHOLD_MOUSE> <WWISE_EVENT>autopilot_knob_turn</WWISE_EVENT> <WWISE_EVENT_1>autopilot_knob_push_button_on</WWISE_EVENT_1> <WWISE_EVENT_2>autopilot_knob_push_button_off</WWISE_EVENT_2> <SYNC_VAR>(A:HEADING INDICATOR, degrees)</SYNC_VAR> <INCREMENT>1</INCREMENT> </Parameters> <Parameters Type="Override"> <Condition Valid="DYNAMIC_VOR_ID"> <True> <KNOB_ID>Course_Dyn_#ID#</KNOB_ID> </True> <False> <KNOB_ID>Course_#ID#</KNOB_ID> </False> </Condition> <Switch Param="TYPE"> <Case Value="PUSH"> <ANIM_NAME_KNOB>#ANIM_NAME#</ANIM_NAME_KNOB> <TT_DESCRIPTION_ID_BTN>@TT_Package.AUTOPILOT_KNOB_COURSE_ACTION_PUSH</TT_DESCRIPTION_ID_BTN> <ADDITIONAL_EVENT_TYPE>PUSH</ADDITIONAL_EVENT_TYPE> <Condition Valid="DYNAMIC_VOR_ID"> <True> <BTN_ID_EXTERNAL>Course_Dyn_#ID#_Sync</BTN_ID_EXTERNAL> <BTN_SET_STATE_EXTERNAL>#SYNC_VAR# sp0 #VOR_ID_1_SELECTED_CHECK# if{ l0 (>K:VOR#ID_1#_SET) } els{ l0 (>K:VOR#ID_2#_SET) }</BTN_SET_STATE_EXTERNAL> </True> <False> <BTN_ID_EXTERNAL>Course_#ID#_Sync</BTN_ID_EXTERNAL> <BTN_SET_STATE_EXTERNAL>#SYNC_VAR# (>K:VOR#ID#_SET)</BTN_SET_STATE_EXTERNAL> </False> </Condition> </Case> </Switch> <Condition Valid="DYNAMIC_VOR_ID"> <True> <SET_STATE_EXTERNAL>1 -1 p0 0 > ? sp0 #VOR_ID_1_SELECTED_CHECK# if{ (A:NAV OBS:#ID_1#, degree) #INCREMENT# l0 * + dnor (>K:VOR#ID_1#_SET) } els{ (A:NAV OBS:#ID_2#, degree) #INCREMENT# l0 * + dnor (>K:VOR#ID_2#_SET) }</SET_STATE_EXTERNAL> <GET_COURSE>(A:NAV OBS:#ID_1#, degree) (A:NAV OBS:#ID_2#, degree) #VOR_ID_1_SELECTED_CHECK# ?</GET_COURSE> </True> <False> <SET_STATE_EXTERNAL>1 -1 p0 0 > ? sp0 (A:NAV OBS:#ID#, degree) #INCREMENT# l0 * + dnor (>K:VOR#ID#_SET)</SET_STATE_EXTERNAL> <GET_COURSE>(A:NAV OBS:#ID#, degree)</GET_COURSE> </False> </Condition> </Parameters> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <Switch Param="ADDITIONAL_EVENT_TYPE"> <Case Value="PUSH"> <UseTemplate Name="ASOBO_AUTOPILOT_Push_Event_Only_Template"> <BTN_ID>#BTN_ID_EXTERNAL#</BTN_ID> <EVENT_TYPE>PUSH</EVENT_TYPE> <SET_STATE_EXTERNAL>#BTN_SET_STATE_EXTERNAL#</SET_STATE_EXTERNAL> <TT_DESCRIPTION_ID>#TT_DESCRIPTION_ID_BTN#</TT_DESCRIPTION_ID> </UseTemplate> </Case> </Switch> <UseTemplate Name="ASOBO_AUTOPILOT_Knob_Template"> <TT_DESCRIPTION_ID>@TT_Package.AUTOPILOT_KNOB_COURSE_ACTION_ADJUST</TT_DESCRIPTION_ID> <TOOLTIP_TITLE>@TT_Package.AUTOPILOT_KNOB_COURSE_TITLE</TOOLTIP_TITLE> <Condition NotEmpty="DYN_VOR_FORMAT_VALUE_OVERRIDE"> <True> <FORMAT_VALUE>#DYN_VOR_FORMAT_VALUE_OVERRIDE#</FORMAT_VALUE> </True> <False> <FORMAT_VALUE>l0 '%d°' @sprintf</FORMAT_VALUE> </False> </Condition> <GET_TT_VALUE_STATE>#GET_COURSE# sp0</GET_TT_VALUE_STATE> </UseTemplate> </Component> </Template>Parameters initialization:
-
Override
Condition: Check(PUSH)
-
Case: True
Parameters set:
- TYPE
-
-
Default
Parameters set:
- ANIM_NAME (using ID, SUFFIX_ID)
- NODE_ID (using ID, SUFFIX_ID)
- PART_ID
- COUNT
- THRESHOLD_X_INPUT
- THRESHOLD_X_MOUSE
- THRESHOLD_INPUT
- THRESHOLD_MOUSE
- WWISE_EVENT
- WWISE_EVENT_1
- WWISE_EVENT_2
- SYNC_VAR
- INCREMENT
Condition: Check(TYPE)
-
Case: True
Parameters set:
- ANIM_NAME_PUSH (using ID, SUFFIX_ID)
Condition: Valid(DYNAMIC_VOR_ID)
-
Case: True
Parameters set:
- VOR_ID_1_SELECTED_CHECK
- ID_1 (using ID)
- ID_2 (using ID)
-
Override
Condition: Valid(DYNAMIC_VOR_ID)
-
Case: True
Parameters set:
- KNOB_ID (using ID)
-
Case: False
Parameters set:
- KNOB_ID (using ID)
Condition: Switch(TYPE)
-
Case: PUSH
Parameters set:
- ANIM_NAME_KNOB (using ANIM_NAME)
- TT_DESCRIPTION_ID_BTN
- ADDITIONAL_EVENT_TYPE
Condition: Valid(DYNAMIC_VOR_ID)
-
Case: True
Parameters set:
- BTN_ID_EXTERNAL (using ID)
- BTN_SET_STATE_EXTERNAL (using SYNC_VAR, VOR_ID_1_SELECTED_CHECK, ID_1, ID_2)
-
Case: False
Parameters set:
- BTN_ID_EXTERNAL (using ID)
- BTN_SET_STATE_EXTERNAL (using SYNC_VAR, ID)
Condition: Valid(DYNAMIC_VOR_ID)
-
Case: True
Parameters set:
- SET_STATE_EXTERNAL (using VOR_ID_1_SELECTED_CHECK, ID_1, INCREMENT, ID_2)
- GET_COURSE (using ID_1, ID_2, VOR_ID_1_SELECTED_CHECK)
-
Case: False
Parameters set:
- SET_STATE_EXTERNAL (using ID, INCREMENT)
- GET_COURSE (using ID)
-
Parameters read:
- NODE_ID
Components:
-
#NODE_ID# (Node: #NODE_ID#)
Templates used:
-
ASOBO_AUTOPILOT_Knob_Template
-
May include a subtemplate using the parameter 'TEMPLATE_TO_CALL' and resolve to the following template(s):
- ASOBO_GT_Switch_XStates
- ASOBO_GT_Knob_#KNOB_TYPE##TEMPLATE_VARIANT#
Parameters set:
- TT_DESCRIPTION_ID
- TOOLTIP_TITLE
- GET_TT_VALUE_STATE (using GET_COURSE)
Condition: NotEmpty(DYN_VOR_FORMAT_VALUE_OVERRIDE)
-
Case: True
Parameters set:
- FORMAT_VALUE (using DYN_VOR_FORMAT_VALUE_OVERRIDE)
-
Case: False
Parameters set:
- FORMAT_VALUE
-
May include a subtemplate using the parameter 'TEMPLATE_TO_CALL' and resolve to the following template(s):
Condition: Switch(ADDITIONAL_EVENT_TYPE)
-
Case: PUSH
Templates used:
-
ASOBO_AUTOPILOT_Push_Event_Only_Template
Parameters set:
- BTN_ID (using BTN_ID_EXTERNAL)
- EVENT_TYPE
- SET_STATE_EXTERNAL (using BTN_SET_STATE_EXTERNAL)
- TT_DESCRIPTION_ID (using TT_DESCRIPTION_ID_BTN)
-
ASOBO_AUTOPILOT_Push_Event_Only_Template
-
ASOBO_AUTOPILOT_Knob_Template
-
Override
-
ASOBO_AUTOPILOT_Push_STD_SubTemplate
Definition from XML<Template Name="ASOBO_AUTOPILOT_Push_STD_SubTemplate"> <Parameters Type="Default"> <BARO_ID>#ID#</BARO_ID> </Parameters> <Parameters Type="Default"> <NODE_ID>AUTOPILOT_Push_STD#SUFFIX_ID#</NODE_ID> <ANIM_NAME>AUTOPILOT_Push_STD#SUFFIX_ID#</ANIM_NAME> <IE_NAME>AUTOPILOT_Push_STD#SUFFIX_ID#</IE_NAME> </Parameters> <UseTemplate Name="ASOBO_AUTOPILOT_Base_Template"> <SET_STATE_EXTERNAL> (L:XMLVAR_Baro#BARO_ID#_ForcedToSTD) ! (>L:XMLVAR_Baro#BARO_ID#_ForcedToSTD) (L:XMLVAR_Baro#BARO_ID#_ForcedToSTD) if{ (A:KOHLSMAN SETTING MB:#BARO_ID#, mbars) 16 * (>L:XMLVAR_Baro#BARO_ID#_SavedPressure) #BARO_ID# (>K:BAROMETRIC_STD_PRESSURE) } els{ #BARO_ID# (L:XMLVAR_Baro#BARO_ID#_SavedPressure) (>K:2:KOHLSMAN_SET) } </SET_STATE_EXTERNAL> <GET_STATE_EXTERNAL>(L:XMLVAR_Baro#BARO_ID#_ForcedToSTD) sp0</GET_STATE_EXTERNAL> <TOOLTIP_TITLE>@TT_Package.AUTOPILOT_PUSH_BARO_STD_TITLE</TOOLTIP_TITLE> <TT_DESCRIPTION_ID>@TT_Package.AUTOPILOT_KNOB_BARO_ACTION_SET_STD</TT_DESCRIPTION_ID> <INTERACTION_TYPE>Push</INTERACTION_TYPE> </UseTemplate> </Template>Parameters initialization:
-
Default
Parameters set:
- BARO_ID (using ID)
-
Default
Parameters set:
- NODE_ID (using SUFFIX_ID)
- ANIM_NAME (using SUFFIX_ID)
- IE_NAME (using SUFFIX_ID)
Templates used:
-
ASOBO_AUTOPILOT_Base_Template
Parameters set:
- SET_STATE_EXTERNAL (using BARO_ID)
- GET_STATE_EXTERNAL (using BARO_ID)
- TOOLTIP_TITLE
- TT_DESCRIPTION_ID
- INTERACTION_TYPE
-
Default
-
ASOBO_AUTOPILOT_Knob_Baro_SubTemplate
Definition from XML<Template Name="ASOBO_AUTOPILOT_Knob_Baro_SubTemplate"> <Parameters Type="Override"> <Condition> <Test> <Or> <Arg Valid="USE_PUSH_STD"/> <Arg Check="PUSH"/> </Or> </Test> <True> <TYPE>PUSH</TYPE> </True> </Condition> <Condition> <Test> <Or> <Arg Check="AIRLINER_TYPE"/> <Arg Check="USE_AIRLINER_STD"/> </Or> </Test> <True> <Condition NotEmpty="AIRLINER_TYPE"> <True> <TYPE>#AIRLINER_TYPE#</TYPE> </True> <False> <TYPE>AIRLINER</TYPE> </False> </Condition> </True> </Condition> </Parameters> <Parameters Type="Default"> <INPUT_EVENT_ID_SOURCE>AUTOPILOT</INPUT_EVENT_ID_SOURCE> <NODE_ID>AUTOPILOT_Knob_Baro_#ID##SUFFIX_ID#</NODE_ID> <ANIM_NAME>AUTOPILOT_Knob_Baro_#ID##SUFFIX_ID#</ANIM_NAME> <PART_ID>AUTOPILOT_Knob_Baro</PART_ID> </Parameters> <Parameters Type="Default"> <BARO_ID>#ID#</BARO_ID> <WWISE_EVENT_1>autopilot_knob_push_button_on</WWISE_EVENT_1> <WWISE_EVENT_2>autopilot_knob_push_button_off</WWISE_EVENT_2> <COUNT>36</COUNT> <Switch Param="TYPE"> <Case Value="PUSH"> <ANIM_NAME_KNOB>#ANIM_NAME#</ANIM_NAME_KNOB> <ANIM_NAME_PUSH>AUTOPILOT_Knob_Baro_#ID#_push#SUFFIX_ID#</ANIM_NAME_PUSH> <THRESHOLD_X_INPUT>0.05</THRESHOLD_X_INPUT> <THRESHOLD_X_MOUSE>0.01</THRESHOLD_X_MOUSE> <THRESHOLD_INPUT>0.05</THRESHOLD_INPUT> <THRESHOLD_MOUSE>0.01</THRESHOLD_MOUSE> <WWISE_EVENT>autopilot_knob</WWISE_EVENT> </Case> <Case Value="A320"> <ANIM_NAME_PUSHPULL>AUTOPILOT_Knob_Baro_#ID#_pushpull#SUFFIX_ID#</ANIM_NAME_PUSHPULL> <MODE_BARO>0</MODE_BARO> <MODE_QNH>1</MODE_QNH> <MODE_STD>2</MODE_STD> <WWISE_EVENT>autopilot_selector_knob</WWISE_EVENT> <CENTER_RADIUS>0</CENTER_RADIUS> </Case> <Case Value="AIRLINER"> <ANIM_NAME_KNOB>#ANIM_NAME#</ANIM_NAME_KNOB> <ANIM_NAME_PUSH>AUTOPILOT_Knob_Baro_#ID#_push#SUFFIX_ID#</ANIM_NAME_PUSH> </Case> <Default> <Condition NotEmpty="AIRLINER_TYPE"> <True> <WWISE_EVENT>autopilot_selector_knob</WWISE_EVENT> </True> <False> <WWISE_EVENT>autopilot_knob</WWISE_EVENT> </False> </Condition> </Default> </Switch> </Parameters> <Parameters Type="Override"> <Switch Param="TYPE"> <Case Value="PUSH"> <ADDITIONAL_EVENT_TYPE>PUSH</ADDITIONAL_EVENT_TYPE> <BTN_ID_EXTERNAL>Baro_#ID#_Sync</BTN_ID_EXTERNAL> <BTN_SET_STATE_EXTERNAL>#BARO_ID# (>K:BAROMETRIC)</BTN_SET_STATE_EXTERNAL> <TT_DESCRIPTION_ID_BTN>@TT_Package.AUTOPILOT_KNOB_BARO_ACTION_SET</TT_DESCRIPTION_ID_BTN> </Case> <Case Value="A320"> <DEFAULT_BINDING_STR>Mode</DEFAULT_BINDING_STR> <ADDITIONAL_EVENT_TYPE>PUSH_PULL</ADDITIONAL_EVENT_TYPE> <BTN_ID_PULL>Baro_#ID#_STD</BTN_ID_PULL> <BTN_ID_PUSH>Baro_#ID#_QNH</BTN_ID_PUSH> <PULL_SET_STATE_EXTERNAL>#MODE_STD# (>L:XMLVAR_Baro#BARO_ID#_Mode)</PULL_SET_STATE_EXTERNAL> <PUSH_SET_STATE_EXTERNAL>(L:XMLVAR_Baro#BARO_ID#_Mode) #MODE_STD# == if{ #MODE_BARO# (>L:XMLVAR_Baro#BARO_ID#_Mode) } els{ (L:XMLVAR_Baro#BARO_ID#_Mode) ! (>L:XMLVAR_Baro#BARO_ID#_Mode) }</PUSH_SET_STATE_EXTERNAL> <TT_DESCRIPTION_ID_PULL>@TT_Package.AUTOPILOT_KNOB_BARO_ACTION_SET_STD</TT_DESCRIPTION_ID_PULL> <TT_DESCRIPTION_ID_PUSH>@TT_Package.AUTOPILOT_KNOB_BARO_ACTION_SET_QNH</TT_DESCRIPTION_ID_PUSH> <OVERRIDE_PUSH_ANIM_CODE>0 100 (L:XMLVAR_Baro#BARO_ID#_Mode) #MODE_STD# == ? 50 (O:_PushAnimVar) ?</OVERRIDE_PUSH_ANIM_CODE> <BARO_SET_CONDITION>(L:XMLVAR_Baro#BARO_ID#_Mode) #MODE_STD# !=</BARO_SET_CONDITION> </Case> <Case Value="AIRLINER"> <ADDITIONAL_EVENT_TYPE>PUSH</ADDITIONAL_EVENT_TYPE> <BTN_ID_EXTERNAL>Baro_#ID#_STD</BTN_ID_EXTERNAL> <BTN_SET_STATE_EXTERNAL> (L:XMLVAR_Baro#BARO_ID#_ForcedToSTD) ! (>L:XMLVAR_Baro#BARO_ID#_ForcedToSTD) (L:XMLVAR_Baro#BARO_ID#_ForcedToSTD) if{ (A:KOHLSMAN SETTING MB:#BARO_ID#, mbars) 16 * (>L:XMLVAR_Baro#BARO_ID#_SavedPressure) #BARO_ID# (>K:BAROMETRIC_STD_PRESSURE) } els{ #BARO_ID# (L:XMLVAR_Baro#BARO_ID#_SavedPressure) (>K:2:KOHLSMAN_SET) } </BTN_SET_STATE_EXTERNAL> <BARO_SET_CONDITION>(L:XMLVAR_Baro#BARO_ID#_ForcedToSTD) !</BARO_SET_CONDITION> <TT_DESCRIPTION_ID_BTN>@TT_Package.AUTOPILOT_KNOB_BARO_ACTION_SET_STD</TT_DESCRIPTION_ID_BTN> </Case> </Switch> <KNOB_ID>Baro_#ID#</KNOB_ID> <SET_STATE_EXTERNAL>p0 0 > if{ #BARO_ID# (>K:KOHLSMAN_INC) (>H:AP_BARO_Up) } els{ #BARO_ID# (>K:KOHLSMAN_DEC) (>H:AP_BARO_Down) }</SET_STATE_EXTERNAL> </Parameters> <Parameters Type="Override"> <Condition Valid="ALLOW_HTML_EVENTS_IN_STD"> <True> <SET_STATE_EXTERNAL>(L:XMLVAR_Baro#BARO_ID#_ForcedToSTD) if{ p0 0 > if{ #BARO_ID# (>H:AP_BARO_Up) } els{ #BARO_ID# (>H:AP_BARO_Down) } } els{ #SET_STATE_EXTERNAL# }</SET_STATE_EXTERNAL> <BARO_SET_CONDITION/> </True> <False> <Condition NotEmpty="BARO_SET_CONDITION"> <True> <SET_STATE_EXTERNAL>#BARO_SET_CONDITION# if{ #SET_STATE_EXTERNAL# }</SET_STATE_EXTERNAL> </True> </Condition> </False> </Condition> <GET_BARO>(A:KOHLSMAN SETTING MB:#BARO_ID#, inHg)</GET_BARO> </Parameters> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <Switch Param="ADDITIONAL_EVENT_TYPE"> <Case Value="PUSH_PULL"> <UseTemplate Name="ASOBO_AUTOPILOT_Push_Event_Only_Template"> <BTN_ID>#BTN_ID_PULL#</BTN_ID> <EVENT_TYPE>PULL</EVENT_TYPE> <SET_STATE_EXTERNAL>#PULL_SET_STATE_EXTERNAL#</SET_STATE_EXTERNAL> <TT_DESCRIPTION_ID>#TT_DESCRIPTION_ID_PULL#</TT_DESCRIPTION_ID> <Condition Valid="TT_DESCRIPTION_ID_PULL_IS_DYNAMIC"> <TT_DESCRIPTION_IS_DYNAMIC>#TT_DESCRIPTION_ID_PULL_IS_DYNAMIC#</TT_DESCRIPTION_IS_DYNAMIC> </Condition> </UseTemplate> <UseTemplate Name="ASOBO_AUTOPILOT_Push_Event_Only_Template"> <BTN_ID>#BTN_ID_PUSH#</BTN_ID> <EVENT_TYPE>PUSH</EVENT_TYPE> <SET_STATE_EXTERNAL>#PUSH_SET_STATE_EXTERNAL#</SET_STATE_EXTERNAL> <TT_DESCRIPTION_ID>#TT_DESCRIPTION_ID_PUSH#</TT_DESCRIPTION_ID> <Condition Valid="TT_DESCRIPTION_ID_PUSH_IS_DYNAMIC"> <TT_DESCRIPTION_IS_DYNAMIC>#TT_DESCRIPTION_ID_PUSH_IS_DYNAMIC#</TT_DESCRIPTION_IS_DYNAMIC> </Condition> </UseTemplate> </Case> <Case Value="PUSH"> <UseTemplate Name="ASOBO_AUTOPILOT_Push_Event_Only_Template"> <BTN_ID>#BTN_ID_EXTERNAL#</BTN_ID> <EVENT_TYPE>PUSH</EVENT_TYPE> <SET_STATE_EXTERNAL>#BTN_SET_STATE_EXTERNAL#</SET_STATE_EXTERNAL> <TT_DESCRIPTION_ID>#TT_DESCRIPTION_ID_BTN#</TT_DESCRIPTION_ID> <Condition Valid="TT_DESCRIPTION_ID_BTN_IS_DYNAMIC"> <TT_DESCRIPTION_IS_DYNAMIC>#TT_DESCRIPTION_ID_BTN_IS_DYNAMIC#</TT_DESCRIPTION_IS_DYNAMIC> </Condition> </UseTemplate> </Case> </Switch> <UseTemplate Name="ASOBO_AUTOPILOT_Knob_Template"> <TT_DESCRIPTION_ID>@TT_Package.AUTOPILOT_KNOB_BARO_ACTION</TT_DESCRIPTION_ID> <TOOLTIP_TITLE>@TT_Package.AUTOPILOT_KNOB_BARO_TITLE</TOOLTIP_TITLE> <GET_TT_VALUE_STATE>#GET_BARO# sp0</GET_TT_VALUE_STATE> <FORMAT_VALUE>l0 '%.2fIN' @sprintf</FORMAT_VALUE> <Switch Param="ADDITIONAL_EVENT_TYPE"> <Case Value="PUSH_PULL"> <TEMPLATE_VARIANT>_PushPull</TEMPLATE_VARIANT> <PULL_CODE>(>B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID_PULL#_#DEFAULT_BINDING_STR#)</PULL_CODE> <PUSH_CODE>(>B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID_PUSH#_#DEFAULT_BINDING_STR#)</PUSH_CODE> <TOOLTIP_ENTRY_1>#INPUT_EVENT_ID_SOURCE#_#BTN_ID_PULL#</TOOLTIP_ENTRY_1> <TOOLTIP_ENTRY_2>#INPUT_EVENT_ID_SOURCE#_#BTN_ID_PUSH#</TOOLTIP_ENTRY_2> </Case> </Switch> </UseTemplate> </Component> </Template>Parameters initialization:
-
Override
Condition: Test(USE_PUSH_STD, PUSH)
-
Case: True
Parameters set:
- TYPE
Condition: Test(AIRLINER_TYPE, USE_AIRLINER_STD)
-
Case: True
Condition: NotEmpty(AIRLINER_TYPE)
-
Case: True
Parameters set:
- TYPE (using AIRLINER_TYPE)
-
Case: False
Parameters set:
- TYPE
-
-
-
Default
Parameters set:
- INPUT_EVENT_ID_SOURCE
- NODE_ID (using ID, SUFFIX_ID)
- ANIM_NAME (using ID, SUFFIX_ID)
- PART_ID
-
Default
Parameters set:
- BARO_ID (using ID)
- WWISE_EVENT_1
- WWISE_EVENT_2
- COUNT
Condition: Switch(TYPE)
-
Case: PUSH
Parameters set:
- ANIM_NAME_KNOB (using ANIM_NAME)
- ANIM_NAME_PUSH (using ID, SUFFIX_ID)
- THRESHOLD_X_INPUT
- THRESHOLD_X_MOUSE
- THRESHOLD_INPUT
- THRESHOLD_MOUSE
- WWISE_EVENT
-
Case: A320
Parameters set:
- ANIM_NAME_PUSHPULL (using ID, SUFFIX_ID)
- MODE_BARO
- MODE_QNH
- MODE_STD
- WWISE_EVENT
- CENTER_RADIUS
-
Case: AIRLINER
Parameters set:
- ANIM_NAME_KNOB (using ANIM_NAME)
- ANIM_NAME_PUSH (using ID, SUFFIX_ID)
-
Default case:
Condition: NotEmpty(AIRLINER_TYPE)
-
Case: True
Parameters set:
- WWISE_EVENT
-
Case: False
Parameters set:
- WWISE_EVENT
-
-
Override
Parameters set:
- KNOB_ID (using ID)
- SET_STATE_EXTERNAL (using BARO_ID)
Condition: Switch(TYPE)
-
Case: PUSH
Parameters set:
- ADDITIONAL_EVENT_TYPE
- BTN_ID_EXTERNAL (using ID)
- BTN_SET_STATE_EXTERNAL (using BARO_ID)
- TT_DESCRIPTION_ID_BTN
-
Case: A320
Parameters set:
- DEFAULT_BINDING_STR
- ADDITIONAL_EVENT_TYPE
- BTN_ID_PULL (using ID)
- BTN_ID_PUSH (using ID)
- PULL_SET_STATE_EXTERNAL (using MODE_STD, BARO_ID)
- PUSH_SET_STATE_EXTERNAL (using BARO_ID, MODE_STD, MODE_BARO)
- TT_DESCRIPTION_ID_PULL
- TT_DESCRIPTION_ID_PUSH
- OVERRIDE_PUSH_ANIM_CODE (using BARO_ID, MODE_STD)
- BARO_SET_CONDITION (using BARO_ID, MODE_STD)
-
Case: AIRLINER
Parameters set:
- ADDITIONAL_EVENT_TYPE
- BTN_ID_EXTERNAL (using ID)
- BTN_SET_STATE_EXTERNAL (using BARO_ID)
- BARO_SET_CONDITION (using BARO_ID)
- TT_DESCRIPTION_ID_BTN
-
Override
Parameters set:
- GET_BARO (using BARO_ID)
Condition: Valid(ALLOW_HTML_EVENTS_IN_STD)
-
Case: True
Parameters set:
- SET_STATE_EXTERNAL (using BARO_ID, SET_STATE_EXTERNAL)
- BARO_SET_CONDITION
-
Case: False
Condition: NotEmpty(BARO_SET_CONDITION)
-
Case: True
Parameters set:
- SET_STATE_EXTERNAL (using BARO_SET_CONDITION, SET_STATE_EXTERNAL)
-
Parameters read:
- NODE_ID
Components:
-
#NODE_ID# (Node: #NODE_ID#)
Templates used:
-
ASOBO_AUTOPILOT_Knob_Template
-
May include a subtemplate using the parameter 'TEMPLATE_TO_CALL' and resolve to the following template(s):
- ASOBO_GT_Switch_XStates
- ASOBO_GT_Knob_#KNOB_TYPE##TEMPLATE_VARIANT#
Parameters set:
- TT_DESCRIPTION_ID
- TOOLTIP_TITLE
- GET_TT_VALUE_STATE (using GET_BARO)
- FORMAT_VALUE
Condition: Switch(ADDITIONAL_EVENT_TYPE)
-
Case: PUSH_PULL
Parameters set:
- TEMPLATE_VARIANT
- PULL_CODE (using INPUT_EVENT_ID_SOURCE, BTN_ID_PULL, DEFAULT_BINDING_STR)
- PUSH_CODE (using INPUT_EVENT_ID_SOURCE, BTN_ID_PUSH, DEFAULT_BINDING_STR)
- TOOLTIP_ENTRY_1 (using INPUT_EVENT_ID_SOURCE, BTN_ID_PULL)
- TOOLTIP_ENTRY_2 (using INPUT_EVENT_ID_SOURCE, BTN_ID_PUSH)
-
May include a subtemplate using the parameter 'TEMPLATE_TO_CALL' and resolve to the following template(s):
Condition: Switch(ADDITIONAL_EVENT_TYPE)
-
Case: PUSH_PULL
Templates used:
-
ASOBO_AUTOPILOT_Push_Event_Only_Template
Parameters set:
- BTN_ID (using BTN_ID_PULL)
- EVENT_TYPE
- SET_STATE_EXTERNAL (using PULL_SET_STATE_EXTERNAL)
- TT_DESCRIPTION_ID (using TT_DESCRIPTION_ID_PULL)
Condition: Valid(TT_DESCRIPTION_ID_PULL_IS_DYNAMIC)
-
Case: True
Parameters set:
- TT_DESCRIPTION_IS_DYNAMIC (using TT_DESCRIPTION_ID_PULL_IS_DYNAMIC)
-
ASOBO_AUTOPILOT_Push_Event_Only_Template
Parameters set:
- BTN_ID (using BTN_ID_PUSH)
- EVENT_TYPE
- SET_STATE_EXTERNAL (using PUSH_SET_STATE_EXTERNAL)
- TT_DESCRIPTION_ID (using TT_DESCRIPTION_ID_PUSH)
Condition: Valid(TT_DESCRIPTION_ID_PUSH_IS_DYNAMIC)
-
Case: True
Parameters set:
- TT_DESCRIPTION_IS_DYNAMIC (using TT_DESCRIPTION_ID_PUSH_IS_DYNAMIC)
-
ASOBO_AUTOPILOT_Push_Event_Only_Template
-
Case: PUSH
Templates used:
-
ASOBO_AUTOPILOT_Push_Event_Only_Template
Parameters set:
- BTN_ID (using BTN_ID_EXTERNAL)
- EVENT_TYPE
- SET_STATE_EXTERNAL (using BTN_SET_STATE_EXTERNAL)
- TT_DESCRIPTION_ID (using TT_DESCRIPTION_ID_BTN)
Condition: Valid(TT_DESCRIPTION_ID_BTN_IS_DYNAMIC)
-
Case: True
Parameters set:
- TT_DESCRIPTION_IS_DYNAMIC (using TT_DESCRIPTION_ID_BTN_IS_DYNAMIC)
-
ASOBO_AUTOPILOT_Push_Event_Only_Template
-
ASOBO_AUTOPILOT_Knob_Template
-
Override