[Go back to index]
Asobo\Common\Subtemplates\Electrical_Subtemplates.xml
Source XML
<ModelBehaviors>
<!-- #################################################### -->
<!-- Template converted and now working using InputEvents -->
<!-- #################################################### -->
<!-- LOCKED : TYPE:LOCKED & TYPE:(airliner)AS02A unsupported by InputEvents -->
<Template Name="ASOBO_ELECTRICAL_Battery_SubTemplate">
<Parameters Type="Default">
<ANIM_NAME>ELECTRICAL_#INTERACTION_TYPE#_Battery_Master_#ID#</ANIM_NAME>
<NODE_ID>ELECTRICAL_#INTERACTION_TYPE#_Battery_Master_#ID#</NODE_ID>
<PART_ID>ELECTRICAL_#INTERACTION_TYPE#_Battery_Master</PART_ID>
<Condition Valid="IS_AIRLINER">
<ANIM_NAME_LOCK>ELECTRICAL_#INTERACTION_TYPE#_Battery_Master_#ID#_Lock</ANIM_NAME_LOCK>
<NODE_ID_LOCK>ELECTRICAL_#INTERACTION_TYPE#_Battery_Master_#ID#_Lock</NODE_ID_LOCK>
<FAULT_NODE_ID>ELECTRICAL_#INTERACTION_TYPE#_Battery_Master_Fault_#ID#</FAULT_NODE_ID>
<OFF_NODE_ID>ELECTRICAL_#INTERACTION_TYPE#_Battery_Master_Off_#ID#</OFF_NODE_ID>
<ON_NODE_ID>ELECTRICAL_#INTERACTION_TYPE#_Battery_Master_On_#ID#</ON_NODE_ID>
</Condition>
<Switch Param="INTERACTION_TYPE">
<Case Value="Switch">
<Condition Check="TYPE">
<SWITCH_TYPE>#TYPE#</SWITCH_TYPE>
</Condition>
</Case>
</Switch>
</Parameters>
<Parameters Type="Default">
<Switch Param="INTERACTION_TYPE">
<Case Value="Switch">
<WWISE_EVENT_1>battery_switch_on</WWISE_EVENT_1>
<WWISE_EVENT_2>battery_switch_off</WWISE_EVENT_2>
<Switch Param="SWITCH_TYPE">
<Case Value="ON_OFF_EMERGENCY">
<MAIN_BUS_ID>1</MAIN_BUS_ID>
<ESSENTIAL_BUS_ID>2</ESSENTIAL_BUS_ID>
<BATTERY_BUS_ID>3</BATTERY_BUS_ID>
</Case>
<Case Value="LOCKED">
<LOCK_NODE_ID>#NODE_ID#_Lock</LOCK_NODE_ID>
<LOCK_ANIM_NAME>#ANIM_NAME#_Lock</LOCK_ANIM_NAME>
<COVER_IE_NAME>Battery_#ID#_Cover</COVER_IE_NAME>
<COVER_IE_ID_SOURCE>ELECTRICAL</COVER_IE_ID_SOURCE>
</Case>
</Switch>
</Case>
</Switch>
<Condition Check="SET_AVIONIC_CIRCUIT">
<True>
<ON_TOGGLE_MASTER_BATTERY>
(A:ELECTRICAL MASTER BATTERY:1, Bool) (A:AVIONICS MASTER SWITCH,Bool) != if{ (>K:TOGGLE_AVIONICS_MASTER) }
</ON_TOGGLE_MASTER_BATTERY>
</True>
<False>
<ON_TOGGLE_MASTER_BATTERY/>
</False>
</Condition>
</Parameters>
<Parameters Type="Override">
<Switch Param="SWITCH_TYPE">
<Case Value="AIRBUS">
<TYPE>ON_OFF</TYPE>
<IS_AIRLINER>True</IS_AIRLINER>
<Condition Check="BATTERY_BUS_ID">
<True>
<SEQ1_EMISSIVE_CODE>0</SEQ1_EMISSIVE_CODE>
<SEQ2_EMISSIVE_CODE>#BATTERY_BUS_ID# (A:1:BUS CONNECTION ON:#HOT_BATTERY_BUS_ID#, Bool) !</SEQ2_EMISSIVE_CODE>
</True>
<False>
<SEQ1_EMISSIVE_CODE>0</SEQ1_EMISSIVE_CODE>
<SEQ2_EMISSIVE_CODE>(A:ELECTRICAL MASTER BATTERY:#ID#, Bool) !</SEQ2_EMISSIVE_CODE>
</False>
</Condition>
</Case>
<Case Value="BOEING">
<TYPE>ON_OFF</TYPE>
<IS_AIRLINER>True</IS_AIRLINER>
<Condition Check="BATTERY_BUS_ID">
<True>
<SEQ1_EMISSIVE_CODE>#BATTERY_BUS_ID# (A:1:BUS CONNECTION ON:#HOT_BATTERY_BUS_ID#, Bool)</SEQ1_EMISSIVE_CODE>
<SEQ2_EMISSIVE_CODE>#BATTERY_BUS_ID# (A:1:BUS CONNECTION ON:#HOT_BATTERY_BUS_ID#, Bool) !</SEQ2_EMISSIVE_CODE>
</True>
<False>
<SEQ1_EMISSIVE_CODE>(A:ELECTRICAL MASTER BATTERY:#ID#, Bool)</SEQ1_EMISSIVE_CODE>
<SEQ2_EMISSIVE_CODE>(A:ELECTRICAL MASTER BATTERY:#ID#, Bool) !</SEQ2_EMISSIVE_CODE>
</False>
</Condition>
</Case>
<Case Value="AS02A">
<TYPE>ON_OFF</TYPE>
<IS_AIRLINER>True</IS_AIRLINER>
</Case>
<Case Value="ON_OFF_EMERGENCY">
<TYPE>ON_OFF_EMERGENCY</TYPE>
<IS_AIRLINER>False</IS_AIRLINER>
</Case>
<Case Value="GPU_BATT_OFF">
<TYPE>GPU_BATT_OFF</TYPE>
<IS_AIRLINER>False</IS_AIRLINER>
</Case>
<Default>
<TYPE>ON_OFF</TYPE>
<IS_AIRLINER>False</IS_AIRLINER>
</Default>
</Switch>
</Parameters>
<Parameters Type="Default">
<Switch Param="TYPE">
<Case Value="ON_OFF">
<STATE_ON>1</STATE_ON>
<STATE_OFF>0</STATE_OFF>
</Case>
<Case Value="ON_OFF_EMERGENCY">
<STATE_ON>0</STATE_ON>
<STATE_OFF>1</STATE_OFF>
<STATE_EMERGENCY>2</STATE_EMERGENCY>
</Case>
<Case Value="GPU_BATT_OFF">
<STATE_GPU>0</STATE_GPU>
<STATE_BATT>1</STATE_BATT>
<STATE_OFF>2</STATE_OFF>
</Case>
</Switch>
</Parameters>
<Parameters Type="Default">
<TOOLTIP_BATTERY_TITLE>@TT_Package.ELECTRICAL_BATTERY_TITLE</TOOLTIP_BATTERY_TITLE>
</Parameters>
<Parameters Type="Override">
<TOOLTIP_TITLE>#TOOLTIP_BATTERY_TITLE#</TOOLTIP_TITLE>
<TOOLTIP_ENTRY_0>ELECTRICAL_Battery_#ID#</TOOLTIP_ENTRY_0>
</Parameters>
<UseInputEvent ID="ELECTRICAL">
<BATTERY_ID>#ID#</BATTERY_ID>
<ON_STATE_CHANGED_EXTERNAL_CODE>#ON_TOGGLE_MASTER_BATTERY#</ON_STATE_CHANGED_EXTERNAL_CODE>
</UseInputEvent>
<Condition Valid="IS_AIRLINER">
<True>
<Condition Check="BATTERY_BUS_ID">
<True>
<UseTemplate Name="ASOBO_GT_Helper_Recursive_Param_Builder">
<EXIT_TEMPLATE>ASOBO_GT_Update</EXIT_TEMPLATE>
<PARAM_NAME>UPDATE_CODE</PARAM_NAME>
<PARAM_START>
(* Prevent Battery from being shut down, instead disconnect it from bus *)
</PARAM_START>
<PARAM_REPEATED_START>(A:ELECTRICAL MASTER BATTERY:</PARAM_REPEATED_START>
<PARAM_REPEATED_END>, Bool) ! if{ </PARAM_REPEATED_END>
<PARAM_REPEATED_2_START>
#BATTERY_BUS_ID# (A:1:BUS CONNECTION ON:#HOT_BATTERY_BUS_ID#, Bool) if{
#BATTERY_BUS_ID# #HOT_BATTERY_BUS_ID# (>K:2:ELECTRICAL_BUS_TO_BUS_CONNECTION_TOGGLE)
}
</PARAM_REPEATED_2_START>
<PARAM_REPEATED_2_END> (>K:TOGGLE_MASTER_BATTERY)
}
</PARAM_REPEATED_2_END>
<FREQUENCY>1</FREQUENCY>
</UseTemplate>
</True>
</Condition>
<Switch Param="SWITCH_TYPE">
<Case Value="AS02A">
<!-- TODO: InputEvent for this specific case -->
<Component ID="#NODE_ID_LOCK#" Node="#NODE_ID_LOCK#">
<UseTemplate Name="ASOBO_GT_Switch_Code">
<ANIM_NAME>#ANIM_NAME_LOCK#</ANIM_NAME>
<ANIM_CODE>(L:XMLVAR_BatteryStatus_Unlocked) 100 *</ANIM_CODE>
<LEFT_SINGLE_CODE>(L:XMLVAR_BatteryStatus_Unlocked) ! (>L:XMLVAR_BatteryStatus_Unlocked)</LEFT_SINGLE_CODE>
<WWISE_EVENT_1>lock_battery_switch_on</WWISE_EVENT_1>
<WWISE_EVENT_2>lock_battery_switch_off</WWISE_EVENT_2>
<ANIMREF_ID>0</ANIMREF_ID>
<ANIMTIP_0_ON_PERCENT>0</ANIMTIP_0_ON_PERCENT>
<ANIMTIP_1_ON_PERCENT>1</ANIMTIP_1_ON_PERCENT>
<ANIMTIP_0>TT:COCKPIT.TOOLTIPS.BATTERY_SWITCH_GUARD_ON</ANIMTIP_0>
<ANIMTIP_1>TT:COCKPIT.TOOLTIPS.BATTERY_SWITCH_GUARD_OFF</ANIMTIP_1>
</UseTemplate>
</Component>
<Component ID="#NODE_ID#" Node="#NODE_ID#">
<UseTemplate Name = "ASOBO_GT_Switch_3States">
<SWITCH_POSITION_TYPE>L</SWITCH_POSITION_TYPE>
<SWITCH_POSITION_VAR>XMLVAR_BatteryStatus</SWITCH_POSITION_VAR>
<CODE_POS_0_VERIF>(L:XMLVAR_BatteryStatus_Unlocked) 1 ==</CODE_POS_0_VERIF>
<STATE1_TEST>(L:XMLVAR_BatteryStatus) 0 == (L:XMLVAR_BatteryStatus_Unlocked) 0 == and</STATE1_TEST>
<WWISE_EVENT>battery_switch</WWISE_EVENT>
<!-- Logic for this is Handled inside of AS02A_Battery_Type_Switcher -->
</UseTemplate>
</Component>
</Case>
<Default>
<UseTemplate Name="ASOBO_GT_Push_Button_Airliner">
<LEFT_SINGLE_CODE>(>B:ELECTRICAL_Battery_#ID#_Toggle)</LEFT_SINGLE_CODE>
<NORMALIZED_TIME_1>0.1</NORMALIZED_TIME_1>
<NORMALIZED_TIME_2>0.5</NORMALIZED_TIME_2>
</UseTemplate>
</Default>
</Switch>
</True>
<False>
<Switch Param="SWITCH_TYPE">
<Case Value="ON_OFF_EMERGENCY">
<Component ID="#NODE_ID#" Node="#NODE_ID#">
<UseTemplate Name="ASOBO_GT_Switch_3States">
<CODE_POS_#STATE_ON#>(>B:ELECTRICAL_Battery_#ID#_On)</CODE_POS_#STATE_ON#>
<CODE_POS_#STATE_OFF#>(>B:ELECTRICAL_Battery_#ID#_Off)</CODE_POS_#STATE_OFF#>
<CODE_POS_#STATE_EMERGENCY#>(>B:ELECTRICAL_Battery_#ID#_Emergency)</CODE_POS_#STATE_EMERGENCY#>
<STATE#STATE_ON#_TEST>(B:ELECTRICAL_Battery_#ID#, Number) #STATE_ON# ==</STATE#STATE_ON#_TEST>
<STATE#STATE_OFF#_TEST>(B:ELECTRICAL_Battery_#ID#, Number) #STATE_OFF# ==</STATE#STATE_OFF#_TEST>
<STATE#STATE_EMERGENCY#_TEST>(B:ELECTRICAL_Battery_#ID#, Number) #STATE_EMERGENCY# ==</STATE#STATE_EMERGENCY#_TEST>
<WWISE_EVENT>battery_switch</WWISE_EVENT>
</UseTemplate>
</Component>
</Case>
<Case Value="GPU_BATT_OFF">
<Component ID="#NODE_ID#" Node="#NODE_ID#">
<UseTemplate Name="ASOBO_GT_Switch_3States">
<CODE_POS_#STATE_GPU#>(>B:ELECTRICAL_Battery_#ID#_GPU)</CODE_POS_#STATE_GPU#>
<CODE_POS_#STATE_BATT#>(>B:ELECTRICAL_Battery_#ID#_Battery)</CODE_POS_#STATE_BATT#>
<CODE_POS_#STATE_OFF#>(>B:ELECTRICAL_Battery_#ID#_Off)</CODE_POS_#STATE_OFF#>
<STATE#STATE_GPU#_TEST>(B:ELECTRICAL_Battery_#ID#, Number) #STATE_GPU# ==</STATE#STATE_GPU#_TEST>
<STATE#STATE_BATT#_TEST>(B:ELECTRICAL_Battery_#ID#, Number) #STATE_BATT# ==</STATE#STATE_BATT#_TEST>
<STATE#STATE_OFF#_TEST>(B:ELECTRICAL_Battery_#ID#, Number) #STATE_OFF# ==</STATE#STATE_OFF#_TEST>
<WWISE_EVENT>battery_switch</WWISE_EVENT>
</UseTemplate>
</Component>
</Case>
<Case Value="LOCKED">
<UseTemplate Name="ASOBO_GT_Switch_Covered">
<SWITCH_NODE_ID>#NODE_ID#</SWITCH_NODE_ID>
<SWITCH_ANIM_NAME>#ANIM_NAME#</SWITCH_ANIM_NAME>
<COVER_NODE_ID>#LOCK_NODE_ID#</COVER_NODE_ID>
<COVER_ANIM_NAME>#LOCK_ANIM_NAME#</COVER_ANIM_NAME>
<COVER_VAR_NAME>XMLVAR_ELECTRICAL_Battery_Cover_Opened</COVER_VAR_NAME>
<COVER_VAR_TYPE>I</COVER_VAR_TYPE>
<TOGGLE_STATE>(>B:ELECTRICAL_Battery_#ID#_Toggle)</TOGGLE_STATE>
<SWITCH_ANIM_CODE>(B:ELECTRICAL_Battery_#ID#, Bool) 100 *</SWITCH_ANIM_CODE>
</UseTemplate>
</Case>
<Default>
<Component ID="#NODE_ID#" Node="#NODE_ID#">
<UseTemplate Name="ASOBO_GT_Switch_Code">
<ANIM_CODE>(B:ELECTRICAL_Battery_#ID#, Number) #STATE_ON# == 100 *</ANIM_CODE>
<LEFT_SINGLE_CODE>(>B:ELECTRICAL_Battery_#ID#_Toggle)</LEFT_SINGLE_CODE>
<NORMALIZED_TIME_1>0.1</NORMALIZED_TIME_1>
<NORMALIZED_TIME_2>0.5</NORMALIZED_TIME_2>
</UseTemplate>
</Component>
</Default>
</Switch>
</False>
</Condition>
</Template>
<Template Name="ASOBO_ELECTRICAL_Avionics_Master_SubTemplate">
<Parameters Type="Default">
<ANIM_NAME>ELECTRICAL_#INTERACTION_TYPE#_Avionics_Master</ANIM_NAME>
<NODE_ID>ELECTRICAL_#INTERACTION_TYPE#_Avionics_Master</NODE_ID>
<PART_ID>ELECTRICAL_#INTERACTION_TYPE#_Avionics_Master</PART_ID>
<WWISE_EVENT_1>avionic_switch_on</WWISE_EVENT_1>
<WWISE_EVENT_2>avionic_switch_off</WWISE_EVENT_2>
<TOOLTIP_AVIONICS_TITLE>@TT_Package.ELECTRICAL_SWITCH_AVIONICS_MASTER_TITLE</TOOLTIP_AVIONICS_TITLE>
<TT_DESCRIPTION_ID>@TT_Package.ELECTRICAL_SWITCH_AVIONICS_MASTER_ACTION_SET</TT_DESCRIPTION_ID>
</Parameters>
<Parameters Type="Override">
<BTN_ID>Avionics_Master</BTN_ID>
</Parameters>
<Component ID="#NODE_ID#" Node="#NODE_ID#">
<UseInputEvent ID="ELECTRICAL">
<SET_STATE_ON>1 (>K:AVIONICS_MASTER_SET)</SET_STATE_ON>
<SET_STATE_OFF>0 (>K:AVIONICS_MASTER_SET)</SET_STATE_OFF>
<GET_STATE_EXTERNAL>(A:AVIONICS MASTER SWITCH, Bool) sp0</GET_STATE_EXTERNAL>
<SIM_STATE_IS_ON_EXTERNAL>l0</SIM_STATE_IS_ON_EXTERNAL>
<SIMVAR_TO_WATCH_0>AVIONICS MASTER SWITCH</SIMVAR_TO_WATCH_0>
</UseInputEvent>
<UseTemplate Name="ASOBO_GT_Switch_Code">
<TOOLTIP_TITLE>#TOOLTIP_AVIONICS_TITLE#</TOOLTIP_TITLE>
<TOOLTIP_ENTRY_0>ELECTRICAL_#BTN_ID#</TOOLTIP_ENTRY_0>
<LEFT_SINGLE_CODE>(>B:ELECTRICAL_#BTN_ID#_Toggle)</LEFT_SINGLE_CODE>
<ANIM_CODE>(B:ELECTRICAL_#BTN_ID#, Bool) 100 *</ANIM_CODE>
</UseTemplate>
</Component>
</Template>
<Template Name="ASOBO_ELECTRICAL_Engine_Bleed_SubTemplate">
<Parameters Type="Default">
<ANIM_NAME>ELECTRICAL_#INTERACTION_TYPE#_Engine_Bleed_#ID#</ANIM_NAME>
<NODE_ID>ELECTRICAL_#INTERACTION_TYPE#_Engine_Bleed_#ID#</NODE_ID>
<PART_ID>ELECTRICAL_#INTERACTION_TYPE#_Engine_Bleed</PART_ID>
<WWISE_EVENT_1>engine_bleed_switch_on</WWISE_EVENT_1>
<WWISE_EVENT_2>engine_bleed_switch_off</WWISE_EVENT_2>
<NORMALIZED_TIME_1>0.1</NORMALIZED_TIME_1>
<NORMALIZED_TIME_2>0.5</NORMALIZED_TIME_2>
<IE_ENG_BLEED_ID>#ID#</IE_ENG_BLEED_ID>
<TOOLTIP_ENGINE_BLEED_TITLE>@TT_Package.ENGINE_BLEED_TITLE</TOOLTIP_ENGINE_BLEED_TITLE>
<TT_DESCRIPTION_ID>@TT_Package.ENGINE_BLEED_ACTION</TT_DESCRIPTION_ID>
<TT_DESCRIPTION_INDEX>#ID#</TT_DESCRIPTION_INDEX>
<TT_DESCRIPTION_IS_DYNAMIC>True</TT_DESCRIPTION_IS_DYNAMIC>
</Parameters>
<Parameters Type="Override">
<BTN_ID>Engine_Bleed_#IE_ENG_BLEED_ID#</BTN_ID>
<Switch Param="AIRLINER_TYPE">
<Case Value="AIRBUS">
<SEQ1_EMISSIVE_CODE>0</SEQ1_EMISSIVE_CODE>
<SEQ2_EMISSIVE_CODE>(A:BLEED AIR ENGINE:#ID#, Bool) !</SEQ2_EMISSIVE_CODE>
</Case>
<Case Value="BOEING">
<SEQ1_EMISSIVE_CODE>(A:BLEED AIR ENGINE:#ID#, Bool)</SEQ1_EMISSIVE_CODE>
<SEQ2_EMISSIVE_CODE>(A:BLEED AIR ENGINE:#ID#, Bool) !</SEQ2_EMISSIVE_CODE>
</Case>
</Switch>
</Parameters>
<Parameters Type="Override">
<SET_STATE_ON>1 #ID# (>K:2:ENGINE_BLEED_AIR_SOURCE_SET)</SET_STATE_ON>
<SET_STATE_OFF>0 #ID# (>K:2:ENGINE_BLEED_AIR_SOURCE_SET)</SET_STATE_OFF>
<GET_STATE_EXTERNAL>(A:BLEED AIR ENGINE:#ID#, Bool) sp0</GET_STATE_EXTERNAL>
<SIM_STATE_IS_ON_EXTERNAL>l0</SIM_STATE_IS_ON_EXTERNAL>
<SIMVAR_TO_WATCH_0>BLEED AIR ENGINE:#ID#</SIMVAR_TO_WATCH_0>
<LEFT_SINGLE_CODE>(>B:ELECTRICAL_#BTN_ID#_Toggle)</LEFT_SINGLE_CODE>
<TOOLTIP_TITLE>#TOOLTIP_ENGINE_BLEED_TITLE#</TOOLTIP_TITLE>
<TOOLTIP_ENTRY_0>ELECTRICAL_#BTN_ID#</TOOLTIP_ENTRY_0>
</Parameters>
<Switch Param="INTERACTION_TYPE">
<Case Value="Push">
<Condition NotEmpty="AIRLINER_TYPE">
<True>
<UseTemplate Name="ASOBO_GT_Push_Button_Airliner">
<INPUT_EVENT_ID>ELECTRICAL</INPUT_EVENT_ID>
</UseTemplate>
</True>
<False>
<Component ID="#NODE_ID#" Node="#NODE_ID#">
<UseInputEvent ID="ELECTRICAL"/>
<UseTemplate Name="ASOBO_GT_Push_Button"/>
</Component>
</False>
</Condition>
</Case>
<Case Value="Switch">
<Component ID="#NODE_ID#" Node="#NODE_ID#">
<UseInputEvent ID="ELECTRICAL">
<ANIM>EXTERNAL</ANIM>
<TT_ICON>MOVE_Y</TT_ICON>
</UseInputEvent>
<UseTemplate Name="ASOBO_GT_Switch_Code">
<ANIM_CODE>(B:ELECTRICAL_#BTN_ID#, Bool) 100 *</ANIM_CODE>
</UseTemplate>
</Component>
</Case>
</Switch>
</Template>
<Template Name="ASOBO_ELECTRICAL_Switch_APU_Bleed_SubTemplate">
<Parameters Type="Default">
<ANIM_NAME>ELECTRICAL_Switch_APU_Bleed</ANIM_NAME>
<NODE_ID>ELECTRICAL_Switch_APU_Bleed</NODE_ID>
<PART_ID>ELECTRICAL_Switch_APU_Bleed</PART_ID>
<FAULT_NODE_ID>ELECTRICAL_Switch_APU_Bleed_Fault</FAULT_NODE_ID>
<ON_NODE_ID>ELECTRICAL_Switch_APU_Bleed_On</ON_NODE_ID>
<WWISE_EVENT_1>apu_bleed_switch_on</WWISE_EVENT_1>
<WWISE_EVENT_2>apu_bleed_switch_off</WWISE_EVENT_2>
<NORMALIZED_TIME_1>0.1</NORMALIZED_TIME_1>
<NORMALIZED_TIME_2>0.5</NORMALIZED_TIME_2>
<TOOLTIP_APU_BLEED_TITLE>@TT_Package.CABIN_PRESSURIZATION_SWITCH_BLEED_APU_TITLE</TOOLTIP_APU_BLEED_TITLE>
</Parameters>
<Parameters Type="Override">
<TOOLTIP_TITLE>#TOOLTIP_APU_BLEED_TITLE#</TOOLTIP_TITLE>
<TOOLTIP_ENTRY_0>ELECTRICAL_APU_Bleed</TOOLTIP_ENTRY_0>
<LEFT_SINGLE_CODE>(>B:ELECTRICAL_APU_Bleed_Toggle)</LEFT_SINGLE_CODE>
<Switch Param="TYPE">
<Case Value="AIRBUS">
<SEQ1_EMISSIVE_CODE>0</SEQ1_EMISSIVE_CODE>
<SEQ2_EMISSIVE_CODE>(B:ELECTRICAL_APU_Bleed)</SEQ2_EMISSIVE_CODE>
</Case>
<Default>
<SEQ1_EMISSIVE_CODE>(B:ELECTRICAL_APU_Bleed)</SEQ1_EMISSIVE_CODE>
<SEQ2_EMISSIVE_CODE>0</SEQ2_EMISSIVE_CODE>
</Default>
</Switch>
</Parameters>
<UseTemplate Name="ASOBO_GT_Push_Button_Airliner">
<INPUT_EVENT_ID>ELECTRICAL</INPUT_EVENT_ID>
<APU_BLEED_ID>1</APU_BLEED_ID>
</UseTemplate>
</Template>
<Template Name="ASOBO_ELECTRICAL_APU_Starter_SubTemplate">
<Parameters Type="Default">
<ANIM_NAME>ELECTRICAL_#INTERACTION_TYPE#_APU_Starter</ANIM_NAME>
<NODE_ID>ELECTRICAL_#INTERACTION_TYPE#_APU_Starter</NODE_ID>
<PART_ID>ELECTRICAL_Switch_APU_Starter</PART_ID>
<EXTRA_CONDITION>1</EXTRA_CONDITION>
<AVAIL_PERCENTAGE>95</AVAIL_PERCENTAGE>
<WWISE_EVENT>starter_apu_switch</WWISE_EVENT>
<WWISE_EVENT_1>starter_apu_switch_on</WWISE_EVENT_1>
<WWISE_EVENT_2>starter_apu_switch_off</WWISE_EVENT_2>
<NORMALIZED_TIME_1>0.1</NORMALIZED_TIME_1>
<NORMALIZED_TIME_2>0.5</NORMALIZED_TIME_2>
<ID>1</ID>
<TOOLTIP_APU_STARTER_TITLE>@TT_Package.ELECTRICAL_SWITCH_APU_STARTER_TITLE</TOOLTIP_APU_STARTER_TITLE>
</Parameters>
<Parameters Type="Override">
<TOOLTIP_TITLE>#TOOLTIP_APU_STARTER_TITLE#</TOOLTIP_TITLE>
<TOOLTIP_ENTRY_0>ELECTRICAL_APU_Starter</TOOLTIP_ENTRY_0>
<Switch Param="INTERACTION_TYPE">
<Case Value="SWITCH">
<Switch Param="NUM_STATES">
<Case Value="2">
<ANIM_CODE>(B:ELECTRICAL_APU_Starter) 100 *</ANIM_CODE>
<LEFT_SINGLE_CODE>(>B:ELECTRICAL_APU_Starter_Toggle)</LEFT_SINGLE_CODE>
<Condition Valid="MATCH_GEN_TO_STARTER">
<ON_STATE_CHANGED_EXTERNAL_CODE>
#ID# (B:ELECTRICAL_APU_Starter) ! (>K:2:APU_GENERATOR_SWITCH_SET)
</ON_STATE_CHANGED_EXTERNAL_CODE>
</Condition>
</Case>
<Case Value="3">
<SWITCH_DIRECTION>Horizontal</SWITCH_DIRECTION>
<ARROW_TYPE>Curved</ARROW_TYPE>
<MOMENTARY_SWITCH/>
<STATE_MAX_TIMER>0.5</STATE_MAX_TIMER>
<STATE0_TIMER>0</STATE0_TIMER>
<CODE_POS_0>(>K:APU_OFF_SWITCH)</CODE_POS_0>
<CODE_POS_1/>
<CODE_POS_2>(>K:APU_STARTER)</CODE_POS_2>
<STATE0_TEST>0</STATE0_TEST>
<STATE1_TEST>(A:APU SWITCH, Bool) (#SWITCH_POSITION_TYPE#:#SWITCH_POSITION_VAR#) 2 != and</STATE1_TEST>
<STATE2_TEST>0</STATE2_TEST>
</Case>
</Switch>
</Case>
<Case Value="PUSH">
<SEQ1_EMISSIVE_CODE>(A:APU PCT RPM, Percent) #AVAIL_PERCENTAGE# >=</SEQ1_EMISSIVE_CODE>
<SEQ2_EMISSIVE_CODE>(A:APU PCT RPM, Percent) 0 > (A:APU PCT RPM, Percent) #AVAIL_PERCENTAGE# < and (A:APU SWITCH, Bool) and</SEQ2_EMISSIVE_CODE>
<Condition Valid="OVERRIDE_LEFT_SINGLE_CODE">
<False> <!-- default -->
<LEFT_SINGLE_CODE>(>B:ELECTRICAL_APU_Starter_Toggle)</LEFT_SINGLE_CODE>
</False>
<True>
<LEFT_SINGLE_CODE>#OVERRIDE_LEFT_SINGLE_CODE#</LEFT_SINGLE_CODE>
</True>
</Condition>
</Case>
</Switch>
</Parameters>
<Switch Param="INTERACTION_TYPE">
<Case Value="SWITCH">
<Component ID="#NODE_ID#" Node="#NODE_ID#">
<UseInputEvent ID="ELECTRICAL">
<APU_STARTER_ID>1</APU_STARTER_ID>
</UseInputEvent>
<Switch Param="NUM_STATES">
<Case Value="2">
<UseTemplate Name="ASOBO_GT_Switch_Code">
</UseTemplate>
</Case>
<Case Value="3">
<UseTemplate Name="ASOBO_GT_Switch_3States">
</UseTemplate>
</Case>
</Switch>
</Component>
</Case>
<Case Value="PUSH">
<UseTemplate Name="ASOBO_GT_Push_Button_Airliner">
<INPUT_EVENT_ID>ELECTRICAL</INPUT_EVENT_ID>
<APU_STARTER_ID>1</APU_STARTER_ID>
</UseTemplate>
</Case>
</Switch>
<Condition Valid="ACTIVE_FUEL_PUMP_ON_RPM">
<True>
<UseTemplate Name="ASOBO_GT_Update">
<FREQUENCY>1</FREQUENCY>
<UPDATE_CODE>
(A:APU SWITCH, Bool) #ACTIVE_FUEL_PUMP_ON_RPM# (>K:2:FUELSYSTEM_PUMP_SET)
</UPDATE_CODE>
</UseTemplate>
</True>
</Condition>
</Template>
<Template Name="ASOBO_ELECTRICAL_APU_Generator_SubTemplate">
<Parameters Type="Default">
<ANIM_NAME>ELECTRICAL_#INTERACTION_TYPE#_APU_Generator</ANIM_NAME>
<NODE_ID>ELECTRICAL_#INTERACTION_TYPE#_APU_Generator</NODE_ID>
<PART_ID>ELECTRICAL_Switch_APU_Generator</PART_ID>
<FAULT_NODE_ID>ELECTRICAL_Switch_APU_Generator_Fault</FAULT_NODE_ID>
<OFF_NODE_ID>ELECTRICAL_Switch_APU_Generator_Off</OFF_NODE_ID>
<WWISE_EVENT>apu_generator_switch</WWISE_EVENT>
<WWISE_EVENT_1>apu_generator_switch_on</WWISE_EVENT_1>
<WWISE_EVENT_2>apu_generator_switch_off</WWISE_EVENT_2>
<NORMALIZED_TIME_1>0.1</NORMALIZED_TIME_1>
<NORMALIZED_TIME_2>0.5</NORMALIZED_TIME_2>
<POST_CLICK_CODE></POST_CLICK_CODE>
<TOOLTIP_APU_GEN_TITLE>@TT_Package.ELECTRICAL_SWITCH_APU_GENERATOR_TITLE</TOOLTIP_APU_GEN_TITLE>
<GEN_ID>#ID#</GEN_ID>
</Parameters>
<Parameters Type="Override">
<TOOLTIP_TITLE>#TOOLTIP_APU_GEN_TITLE#</TOOLTIP_TITLE>
<TOOLTIP_ENTRY_0>ELECTRICAL_APU_Generator_#ID#</TOOLTIP_ENTRY_0>
<Switch Param="TYPE">
<Case Value="AIRBUS">
<SEQ1_EMISSIVE_CODE>0</SEQ1_EMISSIVE_CODE>
<SEQ2_EMISSIVE_CODE>(A:APU GENERATOR SWITCH:#ID#, Bool) !</SEQ2_EMISSIVE_CODE>
</Case>
<Case Value="BOEING">
<SEQ1_EMISSIVE_CODE>(A:APU GENERATOR SWITCH:#ID#, Bool) ! (A:APU PCT RPM, Percent) 95 > and</SEQ1_EMISSIVE_CODE>
<SEQ2_EMISSIVE_CODE>(A:APU GENERATOR SWITCH:#ID#, Bool) (A:APU PCT RPM, Percent) 95 > and</SEQ2_EMISSIVE_CODE>
<POST_CLICK_CODE>#POST_CLICK_CODE# (A:APU GENERATOR SWITCH:#ID#, Bool) if{ 0 #ID# (>K:2:SET_EXTERNAL_POWER) } </POST_CLICK_CODE>
</Case>
<Case Value="AS01B">
<SEQ1_EMISSIVE_CODE>(A:APU GENERATOR SWITCH:#ID#, Bool)</SEQ1_EMISSIVE_CODE>
<SEQ2_EMISSIVE_CODE>(A:APU GENERATOR SWITCH:#ID#, Bool) !</SEQ2_EMISSIVE_CODE>
</Case>
</Switch>
<Switch Param="INTERACTION_TYPE">
<Case Value="SWITCH">
<MOMENTARY_SWITCH/>
<STATE_MAX_TIMER>0.5</STATE_MAX_TIMER>
<STATE0_TIMER>0</STATE0_TIMER>
<NONUNIQUE_DEFAULT>0</NONUNIQUE_DEFAULT>
<SINGLE_ID>1</SINGLE_ID>
<REST_STATE>1</REST_STATE>
<NUM_STATES>3</NUM_STATES>
<CODE_POS_0>
(A:APU GENERATOR SWITCH:#ID#, Bool) ! if{
#ID# (>K:APU_GENERATOR_SWITCH_TOGGLE)
}
0 (>O:XMLVAR_APU_Reset)
</CODE_POS_0>
<CODE_POS_1>
(A:APU GENERATOR SWITCH:#ID#, Bool) if{
#ID# (>K:APU_GENERATOR_SWITCH_TOGGLE)
}
0 (>O:XMLVAR_APU_Reset)
</CODE_POS_1>
<CODE_POS_2>
(A:APU GENERATOR SWITCH:#ID#, Bool) if{
#ID# (>K:APU_GENERATOR_SWITCH_TOGGLE)
}
1 (>O:XMLVAR_APU_Reset)
</CODE_POS_2>
<STATE0_TEST>(A:APU GENERATOR SWITCH:#ID#, bool)</STATE0_TEST>
<STATE1_TEST>(A:APU GENERATOR SWITCH:#ID#, bool) ! (O:XMLVAR_APU_Reset) ! and</STATE1_TEST>
<STATE2_TEST>(A:APU GENERATOR SWITCH:#ID#, bool) ! (O:XMLVAR_APU_Reset) and</STATE2_TEST>
</Case>
<Case Value="PUSH">
<LEFT_SINGLE_CODE>#ID# (>B:ELECTRICAL_APU_Generator_#ID#_Toggle) #POST_CLICK_CODE#</LEFT_SINGLE_CODE>
</Case>
</Switch>
</Parameters>
<Switch Param="INTERACTION_TYPE">
<Case Value="SWITCH">
<Component ID="#NODE_ID#" Node="#NODE_ID#">
<UseInputEvent ID="ELECTRICAL">
<APU_GEN_ID>#GEN_ID#</APU_GEN_ID>
</UseInputEvent>
<UseTemplate Name="ASOBO_GT_Switch_3States">
</UseTemplate>
</Component>
</Case>
<Case Value="PUSH">
<UseTemplate Name="ASOBO_GT_Push_Button_Airliner">
<INPUT_EVENT_ID>ELECTRICAL</INPUT_EVENT_ID>
<APU_GEN_ID>#GEN_ID#</APU_GEN_ID>
</UseTemplate>
</Case>
</Switch>
</Template>
<Template Name="ASOBO_ELECTRICAL_Alternator_SubTemplate">
<Parameters Type="Default">
<ANIM_NAME>ELECTRICAL_Switch_Alternator_#ID#</ANIM_NAME>
<NODE_ID>ELECTRICAL_Switch_Alternator_#ID#</NODE_ID>
<PART_ID>ELECTRICAL_Switch_Alternator</PART_ID>
<ENGINE_ID>#ID#</ENGINE_ID>
<Switch Param="TYPE">
<Case Value="RESET_ON_TRIP">
<POS_RESET>0</POS_RESET>
<POS_ON>1</POS_ON>
<POS_TRIP>2</POS_TRIP>
</Case>
<Case Value="ON_OFF_RESET">
<POS_ON>0</POS_ON>
<POS_OFF>1</POS_OFF>
<POS_RESET>2</POS_RESET>
</Case>
<Case Value="STBY_MAIN_OFF">
<POS_STBY>0</POS_STBY>
<POS_MAIN>1</POS_MAIN>
<POS_OFF>2</POS_OFF>
</Case>
</Switch>
<TOOLTIP_TITLE>@TT_Package.ELECTRICAL_ALTERNATOR_TITLE</TOOLTIP_TITLE>
<TT_DESCRIPTION_ID>@TT_Package.ELECTRICAL_ALTERNATOR_ACTION_SET_SOLO</TT_DESCRIPTION_ID>
</Parameters>
<Parameters Type="Override">
<TOOLTIP_ENTRY_0>ELECTRICAL_Alternator_#ID#</TOOLTIP_ENTRY_0>
<Switch Param="INTERACTION_TYPE">
<Case Value="PUSH">
<NUM_STATES>2</NUM_STATES>
<Switch Param="TYPE">
<Case Value="AIRBUS">
<SEQ1_EMISSIVE_CODE>(A:GENERAL ENG MASTER ALTERNATOR:#ID#, bool) (A:GENERAL ENG PCT MAX RPM:#ENGINE_ID#, Percent) 1 < and</SEQ1_EMISSIVE_CODE>
<SEQ2_EMISSIVE_CODE>(A:GENERAL ENG MASTER ALTERNATOR:#ID#, Bool) !</SEQ2_EMISSIVE_CODE>
</Case>
<Case Value="BOEING">
<SEQ1_EMISSIVE_CODE>(A:GENERAL ENG MASTER ALTERNATOR:#ID#, bool)</SEQ1_EMISSIVE_CODE>
<SEQ2_EMISSIVE_CODE>(A:GENERAL ENG MASTER ALTERNATOR:#ID#, Bool) ! (A:GENERAL ENG COMBUSTION:#ENGINE_ID#, Bool) ! or</SEQ2_EMISSIVE_CODE>
</Case>
<Case Value="AS02A">
<SEQ1_EMISSIVE_CODE>(A:GENERAL ENG MASTER ALTERNATOR:#ID#, bool) (A:GENERAL ENG PCT MAX RPM:#ENGINE_ID#, Percent) 1 < and</SEQ1_EMISSIVE_CODE>
<SEQ2_EMISSIVE_CODE>(A:GENERAL ENG MASTER ALTERNATOR:#ID#, Bool) !</SEQ2_EMISSIVE_CODE>
</Case>
</Switch>
</Case>
<Case Value="SWITCH">
<TT_ICON>MOVE_Y</TT_ICON>
<Switch Param="TYPE">
<Case Value="RESET_ON_TRIP">
<NUM_STATES>3</NUM_STATES>
<MOMENTARY_SWITCH/>
<STATE_MAX_TIMER>0.5</STATE_MAX_TIMER>
<STATE0_TIMER>0.5</STATE0_TIMER>
<ALTERNATOR_UPDATE_CODE>(O:XMLVAR_Alternator_Reset_Trip) 0 == (A:GENERAL ENG MASTER ALTERNATOR:#ID#, bool) ! and if{ (>K:TOGGLE_ALTERNATOR#ID#) }</ALTERNATOR_UPDATE_CODE>
<SET_STATE_#POS_RESET#>(A:GENERAL ENG MASTER ALTERNATOR:#ID#, bool) ! if{ (>K:TOGGLE_ALTERNATOR#ID#) } 1 (>O:XMLVAR_Alternator_Reset_Trip)</SET_STATE_#POS_RESET#>
<SET_STATE_#POS_ON#>(A:GENERAL ENG MASTER ALTERNATOR:#ID#, bool) ! if{ (>K:TOGGLE_ALTERNATOR#ID#) } 0 (>O:XMLVAR_Alternator_Reset_Trip)</SET_STATE_#POS_ON#>
<SET_STATE_#POS_TRIP#>(A:GENERAL ENG MASTER ALTERNATOR:#ID#, bool) if{ (>K:TOGGLE_ALTERNATOR#ID#) } 2 (>O:XMLVAR_Alternator_Reset_Trip)</SET_STATE_#POS_TRIP#>
<TT_VALUE_#POS_RESET#>@TT_Package.GT_STATE_RESET</TT_VALUE_#POS_RESET#>
<TT_VALUE_#POS_ON#>@TT_Package.GT_STATE_ON</TT_VALUE_#POS_ON#>
<TT_VALUE_#POS_TRIP#>@TT_Package.GT_STATE_TRIP</TT_VALUE_#POS_TRIP#>
<GET_STATE_EXTERNAL>(A:GENERAL ENG MASTER ALTERNATOR:#ID#, bool) sp0 (O:XMLVAR_Alternator_Reset_Trip) sp1</GET_STATE_EXTERNAL>
<ENUM_VAL_TO_POS_EXTERNAL>#POS_ON# sp2 l0 if{ #POS_ON# sp2 g2 } els{ #POS_RESET# #POS_TRIP# (O:XMLVAR_Alternator_Reset_Trip) 1 == ? sp2 g2 } :2 l2</ENUM_VAL_TO_POS_EXTERNAL>
</Case>
<Case Value="ON_OFF_RESET">
<NUM_STATES>3</NUM_STATES>
<MOMENTARY_SWITCH/>
<STATE_MAX_TIMER>0.5</STATE_MAX_TIMER>
<STATE0_TIMER>0</STATE0_TIMER>
<SET_STATE_#POS_ON#>(A:GENERAL ENG MASTER ALTERNATOR:#ID#, bool) ! if{ (>K:TOGGLE_ALTERNATOR#ID#) } 0 (>O:XMLVAR_Alternator_#ID#_Reset)</SET_STATE_#POS_ON#>
<SET_STATE_#POS_OFF#>(A:GENERAL ENG MASTER ALTERNATOR:#ID#, bool) if{ (>K:TOGGLE_ALTERNATOR#ID#) } 0 (>O:XMLVAR_Alternator_#ID#_Reset)</SET_STATE_#POS_OFF#>
<SET_STATE_#POS_RESET#>(A:GENERAL ENG MASTER ALTERNATOR:#ID#, bool) if{ (>K:TOGGLE_ALTERNATOR#ID#) } 1 (>O:XMLVAR_Alternator_#ID#_Reset)</SET_STATE_#POS_RESET#>
<TT_VALUE_#POS_ON#>@TT_Package.GT_STATE_ON</TT_VALUE_#POS_ON#>
<TT_VALUE_#POS_OFF#>@TT_Package.GT_STATE_OFF</TT_VALUE_#POS_OFF#>
<TT_VALUE_#POS_RESET#>@TT_Package.GT_STATE_RESET</TT_VALUE_#POS_RESET#>
<GET_STATE_EXTERNAL>(A:GENERAL ENG MASTER ALTERNATOR:#ID#, bool) sp0 (O:XMLVAR_Alternator_#ID#_Reset) sp1</GET_STATE_EXTERNAL>
<ENUM_VAL_TO_POS_EXTERNAL>#POS_OFF# sp2 l0 if{ #POS_ON# sp2 g2 } els{ #POS_RESET# #POS_OFF# l1 ? sp2 g2 } :2 l2</ENUM_VAL_TO_POS_EXTERNAL>
</Case>
<Case Value="STBY_MAIN_OFF">
<NUM_STATES>3</NUM_STATES>
<SET_STATE_#POS_STBY#>(A:GENERAL ENG MASTER ALTERNATOR:#ID#, bool) ! if{ (>K:TOGGLE_ALTERNATOR#ID#) } 1 (>O:XMLVAR_ELECTRICAL_Generator_Standby_ON)</SET_STATE_#POS_STBY#>
<SET_STATE_#POS_MAIN#>(A:GENERAL ENG MASTER ALTERNATOR:#ID#, bool) ! if{ (>K:TOGGLE_ALTERNATOR#ID#) } 0 (>O:XMLVAR_ELECTRICAL_Generator_Standby_ON)</SET_STATE_#POS_MAIN#>
<SET_STATE_#POS_OFF#>(A:GENERAL ENG MASTER ALTERNATOR:#ID#, bool) if{ (>K:TOGGLE_ALTERNATOR#ID#) } 0 (>O:XMLVAR_ELECTRICAL_Generator_Standby_ON)</SET_STATE_#POS_OFF#>
<TT_VALUE_#POS_STBY#>@TT_Package.GT_STATE_STANDBY</TT_VALUE_#POS_STBY#>
<TT_VALUE_#POS_MAIN#>@TT_Package.GT_STATE_MAIN</TT_VALUE_#POS_MAIN#>
<TT_VALUE_#POS_OFF#>@TT_Package.GT_STATE_OFF</TT_VALUE_#POS_OFF#>
<GET_STATE_EXTERNAL>(A:GENERAL ENG MASTER ALTERNATOR:#ID#, bool) sp0 (O:XMLVAR_ELECTRICAL_Generator_Standby_ON) sp1</GET_STATE_EXTERNAL>
<ENUM_VAL_TO_POS_EXTERNAL>#POS_OFF# sp2 l0 if{ #POS_STBY# #POS_MAIN# l1 ? sp2 g2 } els{ #POS_OFF# sp2 g2 } :2 l2</ENUM_VAL_TO_POS_EXTERNAL>
</Case>
<Default>
<NUM_STATES>2</NUM_STATES>
</Default>
</Switch>
</Case>
</Switch>
</Parameters>
<Parameters Type="Default">
<Switch Param="NUM_STATES">
<Case Value="2">
<WWISE_EVENT_1>alternator_switch_on</WWISE_EVENT_1>
<WWISE_EVENT_2>alternator_switch_off</WWISE_EVENT_2>
</Case>
<Case Value="3">
<WWISE_EVENT>alternator_switch</WWISE_EVENT>
</Case>
</Switch>
</Parameters>
<Parameters Type="Override">
<BTN_ID>Alternator_#ID#</BTN_ID>
<SIMVAR_TO_WATCH_0>GENERAL ENG MASTER ALTERNATOR:#ID#</SIMVAR_TO_WATCH_0>
<Switch Param="NUM_STATES">
<Case Value="3">
<Switch Param="TYPE">
<Case Value="RESET_ON_TRIP">
<POS_0>#POS_RESET#</POS_0>
<ID_POS_0>Reset</ID_POS_0>
<POS_1>#POS_ON#</POS_1>
<ID_POS_1>On</ID_POS_1>
<POS_2>#POS_TRIP#</POS_2>
<ID_POS_2>Trip</ID_POS_2>
</Case>
<Case Value="ON_OFF_RESET">
<POS_0>#POS_ON#</POS_0>
<ID_POS_0>On</ID_POS_0>
<POS_1>#POS_OFF#</POS_1>
<ID_POS_1>Off</ID_POS_1>
<POS_2>#POS_RESET#</POS_2>
<ID_POS_2>Reset</ID_POS_2>
</Case>
<Case Value="STBY_MAIN_OFF">
<POS_0>#POS_STBY#</POS_0>
<ID_POS_0>Standby</ID_POS_0>
<POS_1>#POS_MAIN#</POS_1>
<ID_POS_1>Main</ID_POS_1>
<POS_2>#POS_OFF#</POS_2>
<ID_POS_2>Off</ID_POS_2>
</Case>
</Switch>
</Case>
<Case Value="2">
<SET_STATE_EXTERNAL>p0 (A:GENERAL ENG MASTER ALTERNATOR:#ID#, Bool) != if{ #ID# p0 (>K:2:ALTERNATOR_SET) }</SET_STATE_EXTERNAL>
<GET_STATE_EXTERNAL>(A:GENERAL ENG MASTER ALTERNATOR:#ID#, Bool) sp0</GET_STATE_EXTERNAL>
<SIM_STATE_IS_ON_EXTERNAL>l0</SIM_STATE_IS_ON_EXTERNAL>
</Case>
</Switch>
</Parameters>
<Switch Param="INTERACTION_TYPE">
<Case Value="PUSH">
<UseTemplate Name="ASOBO_GT_Push_Button_Airliner">
<INPUT_EVENT_ID>ELECTRICAL</INPUT_EVENT_ID>
<LEFT_SINGLE_CODE>(>B:ELECTRICAL_#BTN_ID#_Toggle)</LEFT_SINGLE_CODE>
</UseTemplate>
</Case>
<Case Value="SWITCH">
<Component ID="#NODE_ID#" Node="#NODE_ID#">
<Condition NotEmpty="ALTERNATOR_UPDATE_CODE">
<UseTemplate Name="ASOBO_GT_Update">
<UPDATE_CODE>#ALTERNATOR_UPDATE_CODE#</UPDATE_CODE>
</UseTemplate>
</Condition>
<UseInputEvent ID="ELECTRICAL">
<ANIM>EXTERNAL</ANIM>
<Switch Param="NUM_STATES">
<Case Value="3">
<STR_STATE_#POS_0#>#ID_POS_0#</STR_STATE_#POS_0#>
<STR_STATE_#POS_1#>#ID_POS_1#</STR_STATE_#POS_1#>
<STR_STATE_#POS_2#>#ID_POS_2#</STR_STATE_#POS_2#>
</Case>
</Switch>
</UseInputEvent>
<Switch Param="NUM_STATES">
<Case Value="2">
<UseTemplate Name="ASOBO_GT_Switch_Code">
<LEFT_SINGLE_CODE>(>B:ELECTRICAL_#BTN_ID#_Toggle)</LEFT_SINGLE_CODE>
<ANIM_CODE>(B:ELECTRICAL_#BTN_ID#, Bool) 100 *</ANIM_CODE>
</UseTemplate>
</Case>
<Case Value="3">
<UseTemplate Name="ASOBO_GT_Switch_XStates">
<CODE_POS_#POS_0#>(>B:ELECTRICAL_#BTN_ID#_#ID_POS_0#)</CODE_POS_#POS_0#>
<CODE_POS_#POS_1#>(>B:ELECTRICAL_#BTN_ID#_#ID_POS_1#)</CODE_POS_#POS_1#>
<CODE_POS_#POS_2#>(>B:ELECTRICAL_#BTN_ID#_#ID_POS_2#)</CODE_POS_#POS_2#>
<STATE#POS_0#_TEST>(B:ELECTRICAL_#BTN_ID#) #POS_0# ==</STATE#POS_0#_TEST>
<STATE#POS_1#_TEST>(B:ELECTRICAL_#BTN_ID#) #POS_1# ==</STATE#POS_1#_TEST>
<STATE#POS_2#_TEST>(B:ELECTRICAL_#BTN_ID#) #POS_2# ==</STATE#POS_2#_TEST>
</UseTemplate>
</Case>
</Switch>
</Component>
</Case>
</Switch>
</Template>
<Template Name="ASOBO_ELECTRICAL_ExternalPower_Template">
<Parameters Type="Default">
<Switch Param="INTERACTION_TYPE">
<Case Value="SWITCH">
<Switch Param="NUM_STATES">
<Case Value="2">
<TYPE>SWITCH_2States</TYPE>
</Case>
<Case Value="3">
<TYPE>SWITCH_3States</TYPE>
</Case>
</Switch>
</Case>
</Switch>
</Parameters>
<Parameters Type="Default">
<PART_ID>ELECTRICAL_Switch_ExternalPower</PART_ID>
<ANIM_NAME>ELECTRICAL_Switch_ExternalPower_#ID#</ANIM_NAME>
<NODE_ID>ELECTRICAL_Switch_ExternalPower_#ID#</NODE_ID>
<Switch Param="INTERACTION_TYPE">
<Case Value="PUSH">
<Switch Param="TYPE">
<Case Value="AIRBUS">
</Case>
<Case Value="BOEING">
<SWAP_SEQ_CONDITION>False</SWAP_SEQ_CONDITION>
</Case>
</Switch>
</Case>
<Case Value="SWITCH">
<Switch Param="TYPE">
<Case Value="SWITCH_3States">
<COVER_NODE_ID>ELECTRICAL_Switch_ExternalPower_#ID#_Cover</COVER_NODE_ID>
<COVER_ANIM_NAME>ELECTRICAL_Switch_ExternalPower_#ID#_Cover</COVER_ANIM_NAME>
<GET_STATE_EXTERNAL>
12 (A:1:BUS CONNECTION ON:1, Bool) sp1
12 (A:1:CIRCUIT CONNECTION ON:11, Bool) sp2
1 (A:1:CIRCUIT CONNECTION ON:11, Bool) sp3
</GET_STATE_EXTERNAL>
<SET_EXTPWR_MAIN_BUS_CONNECTION>l1 != if{ 1 12 (>K:2:ELECTRICAL_BUS_TO_BUS_CONNECTION_TOGGLE) }</SET_EXTPWR_MAIN_BUS_CONNECTION>
<SET_EXTPWR_STARTER_CONNECTION>l2 != if{ 11 12 (>K:2:ELECTRICAL_BUS_TO_CIRCUIT_CONNECTION_TOGGLE) }</SET_EXTPWR_STARTER_CONNECTION>
<SET_STARTER_MAIN_BUS_CONNECTION>l3 != if{ 11 1 (>K:2:ELECTRICAL_BUS_TO_CIRCUIT_CONNECTION_TOGGLE) }</SET_STARTER_MAIN_BUS_CONNECTION>
</Case>
</Switch>
</Case>
</Switch>
<POST_CLICK_CODE></POST_CLICK_CODE>
<EXTPWR_ID>#ID#</EXTPWR_ID>
<TOOLTIP_EXTPWR_TITLE>@TT_Package.ELECTRICAL_SWITCH_EXTERNAL_POWER_TITLE</TOOLTIP_EXTPWR_TITLE>
</Parameters>
<Parameters Type="Override">
<Condition Check="TYPE" Match="AS04F">
<False>
<TOOLTIP_ENTRY_0>ELECTRICAL_ExternalPower_#ID#</TOOLTIP_ENTRY_0>
</False>
</Condition>
<TOOLTIP_TITLE>#TOOLTIP_EXTPWR_TITLE#</TOOLTIP_TITLE>
<Switch Param="INTERACTION_TYPE">
<Case Value="PUSH">
<LEFT_SINGLE_CODE>(>B:ELECTRICAL_ExternalPower_#EXTPWR_ID#_Toggle)</LEFT_SINGLE_CODE>
<WWISE_EVENT_1>externalpower_push_button_on</WWISE_EVENT_1>
<WWISE_EVENT_2>externalpower_push_button_off</WWISE_EVENT_2>
<NORMALIZED_TIME_1>0.1</NORMALIZED_TIME_1>
<NORMALIZED_TIME_2>0.5</NORMALIZED_TIME_2>
<Switch Param="TYPE">
<Case Value="AIRBUS">
<SEQ1_EMISSIVE_CODE>(A:EXTERNAL POWER AVAILABLE:#ID#, Bool) (A:EXTERNAL POWER ON:#ID#, Bool) ! and</SEQ1_EMISSIVE_CODE>
<SEQ2_EMISSIVE_CODE>(A:EXTERNAL POWER AVAILABLE:#ID#, Bool) (A:EXTERNAL POWER ON:#ID#, Bool) and</SEQ2_EMISSIVE_CODE>
</Case>
<Case Value="BOEING">
<ON_STATE_CHANGED>
#POST_CLICK_CODE#
(A:EXTERNAL POWER AVAILABLE:#ID#, Bool) (A:EXTERNAL POWER ON:#ID#, Bool) and if{
(A:EXTERNAL POWER ON:#ID#, Bool) if{ #ID# 0 (>K:2:APU_GENERATOR_SWITCH_SET) }
}
</ON_STATE_CHANGED>
<DOWN_STATE_CODE>(B:ELECTRICAL_ExternalPower_#EXTPWR_ID#)</DOWN_STATE_CODE>
<Switch Param="VARIANT">
<Case Value="747">
<SEQ1_EMISSIVE_CODE>(A:EXTERNAL POWER AVAILABLE:#ID#, Bool) (B:ELECTRICAL_ExternalPower_#EXTPWR_ID#) ! and</SEQ1_EMISSIVE_CODE>
<SEQ2_EMISSIVE_CODE>(A:EXTERNAL POWER AVAILABLE:#ID#, Bool) (B:ELECTRICAL_ExternalPower_#EXTPWR_ID#) and</SEQ2_EMISSIVE_CODE>
</Case>
<Default>
<SEQ1_EMISSIVE_CODE>(A:EXTERNAL POWER AVAILABLE:#ID#, Bool) (B:ELECTRICAL_ExternalPower_#EXTPWR_ID#) and</SEQ1_EMISSIVE_CODE>
<SEQ2_EMISSIVE_CODE>(A:EXTERNAL POWER AVAILABLE:#ID#, Bool) (B:ELECTRICAL_ExternalPower_#EXTPWR_ID#) ! and</SEQ2_EMISSIVE_CODE>
</Default>
</Switch>
</Case>
</Switch>
</Case>
<Case Value="SWITCH">
<Switch Param="TYPE">
<Case Value="SWITCH_2States">
<LEFT_SINGLE_CODE>(>B:ELECTRICAL_ExternalPower_#EXTPWR_ID#_Toggle)</LEFT_SINGLE_CODE>
<ANIM_CODE>(B:ELECTRICAL_ExternalPower_#EXTPWR_ID#) 100 *</ANIM_CODE>
<WWISE_EVENT_1>externalpower_switch_on</WWISE_EVENT_1>
<WWISE_EVENT_2>externalpower_switch_off</WWISE_EVENT_2>
</Case>
<Case Value="SWITCH_3States">
<SWITCH_NODE_ID>#NODE_ID#</SWITCH_NODE_ID>
<SWITCH_ANIM_NAME>#ANIM_NAME#</SWITCH_ANIM_NAME>
<COVER_VAR_NAME>XMLVAR_ELECTRICAL_ExternalPower_#EXTPWR_ID#_Cover_Opened</COVER_VAR_NAME>
<WWISE_EVENT>externalpower_switch</WWISE_EVENT>
<BTN_ID>ExternalPower_#EXTPWR_ID#</BTN_ID>
<EXTPWR_ID/>
</Case>
</Switch>
</Case>
</Switch>
</Parameters>
<Switch Param="INTERACTION_TYPE">
<Case Value="PUSH">
<UseTemplate Name="ASOBO_GT_Push_Button_Airliner">
<INPUT_EVENT_ID>ELECTRICAL</INPUT_EVENT_ID>
<Condition Valid="SWAP_SEQ_CONDITION">
<SEQ1_EMISSIVE_CODE>#SEQ2_EMISSIVE_CODE#</SEQ1_EMISSIVE_CODE>
<SEQ2_EMISSIVE_CODE>#SEQ1_EMISSIVE_CODE#</SEQ2_EMISSIVE_CODE>
</Condition>
</UseTemplate>
</Case>
<Case Value="SWITCH">
<Switch Param="TYPE">
<Case Value="SWITCH_2States">
<Component ID="#NODE_ID#" Node="#NODE_ID#">
<UseInputEvent ID="ELECTRICAL"/>
<UseTemplate Name="ASOBO_GT_Switch_Code"/>
</Component>
</Case>
<Case Value="SWITCH_3States">
<Component ID="ELECTRICAL_ExternalPower">
<UseTemplate Name="ASOBO_GT_Switch_Covered">
<NUM_STATES>3</NUM_STATES>
<INPUT_EVENT_ID>ELECTRICAL</INPUT_EVENT_ID>
<COVER_IE_NAME>#BTN_ID#_Cover</COVER_IE_NAME>
<COVER_IE_ID_SOURCE>ELECTRICAL</COVER_IE_ID_SOURCE>
<CODE_POS_0>(>B:ELECTRICAL_#BTN_ID#_Bus)</CODE_POS_0>
<CODE_POS_1>(>B:ELECTRICAL_#BTN_ID#_Starter)</CODE_POS_1>
<CODE_POS_2>(>B:ELECTRICAL_#BTN_ID#_Off)</CODE_POS_2>
<STATE0_TEST>(B:ELECTRICAL_#BTN_ID#, Number) 0 ==</STATE0_TEST>
<STATE1_TEST>(B:ELECTRICAL_#BTN_ID#, Number) 1 ==</STATE1_TEST>
<STATE2_TEST>(B:ELECTRICAL_#BTN_ID#, Number) 2 ==</STATE2_TEST>
<STR_STATE_0>Bus</STR_STATE_0>
<STR_STATE_1>Starter</STR_STATE_1>
<STR_STATE_2>Off</STR_STATE_2>
<TT_VALUE_0>@TT_Package.GT_STATE_BUS</TT_VALUE_0>
<TT_VALUE_1>@TT_Package.GT_STATE_STARTER</TT_VALUE_1>
<TT_VALUE_2>@TT_Package.GT_STATE_OFF</TT_VALUE_2>
<SET_STATE_0>
(A:EXTERNAL POWER ON:#ID#, Bool) ! if{ #ID# (>K:TOGGLE_EXTERNAL_POWER) }
1 #SET_EXTPWR_MAIN_BUS_CONNECTION#
0 #SET_EXTPWR_STARTER_CONNECTION#
1 #SET_STARTER_MAIN_BUS_CONNECTION#
</SET_STATE_0>
<SET_STATE_1>
(A:EXTERNAL POWER ON:#ID#, Bool) ! if{ #ID# (>K:TOGGLE_EXTERNAL_POWER) }
0 #SET_EXTPWR_MAIN_BUS_CONNECTION#
1 #SET_EXTPWR_STARTER_CONNECTION#
0 #SET_STARTER_MAIN_BUS_CONNECTION#
</SET_STATE_1>
<SET_STATE_2>
(A:EXTERNAL POWER ON:#ID#, Bool) if{ #ID# (>K:TOGGLE_EXTERNAL_POWER) }
0 #SET_EXTPWR_MAIN_BUS_CONNECTION#
0 #SET_EXTPWR_STARTER_CONNECTION#
0 #SET_STARTER_MAIN_BUS_CONNECTION#
</SET_STATE_2>
<TOOLTIP_TITLE>@TT_Package.ELECTRICAL_EXTERNAL_POWER_TITLE</TOOLTIP_TITLE>
<TOOLTIP_ENTRY_0>ELECTRICAL_#BTN_ID#</TOOLTIP_ENTRY_0>
<TT_DESCRIPTION_ID>@TT_Package.ELECTRICAL_EXTERNAL_POWER_ACTION_SET</TT_DESCRIPTION_ID>
<ON_BEFORE_SET_CODE>#GET_STATE_EXTERNAL# </ON_BEFORE_SET_CODE>
<ENUM_VAL_TO_POS_EXTERNAL>(A:EXTERNAL POWER ON:#ID#, Bool) if{ l1 l2 ! and l3 and if{ 0 sp4 g2 } els{ 1 sp4 g2 } } els{ 2 sp4 g2 } :2 l4</ENUM_VAL_TO_POS_EXTERNAL>
<SIMVAR_TO_WATCH_0>EXTERNAL POWER ON:#ID#</SIMVAR_TO_WATCH_0>
</UseTemplate>
</Component>
</Case>
<Case Value="AS04F">
<Component ID="#NODE_ID#_Parent">
<Parameters Type="Override">
<NUM_STATES>3</NUM_STATES>
<POS_RESET>0</POS_RESET>
<POS_NORM>1</POS_NORM>
<POS_OFF>2</POS_OFF>
<EXTPWR_ID/>
</Parameters>
<UseTemplate Name="ASOBO_Electrical_Base_Template">
<IE_NAME>External_Power</IE_NAME>
<TT_DESCRIPTION_ID>@TT_Package.ELECTRICAL_EXTERNAL_POWER_ACTION_SET</TT_DESCRIPTION_ID>
<GET_STATE_EXTERNAL>(A:EXTERNAL POWER ON:#ID#, bool) sp0</GET_STATE_EXTERNAL>
<SET_STATE_#POS_RESET#>
1 #ID# (>K:2:SET_EXTERNAL_POWER)
</SET_STATE_#POS_RESET#>
<SET_STATE_#POS_NORM#></SET_STATE_#POS_NORM#>
<SET_STATE_#POS_OFF#>
0 #ID# (>K:2:SET_EXTERNAL_POWER)
</SET_STATE_#POS_OFF#>
<STR_STATE_#POS_RESET#>Reset</STR_STATE_#POS_RESET#>
<STR_STATE_#POS_NORM#>Norm</STR_STATE_#POS_NORM#>
<STR_STATE_#POS_OFF#>Off</STR_STATE_#POS_OFF#>
<TT_VALUE_#POS_RESET#>@TT_Package.GT_STATE_RESET</TT_VALUE_#POS_RESET#>
<TT_VALUE_#POS_NORM#>@TT_Package.GT_STATE_MODENORM</TT_VALUE_#POS_NORM#>
<TT_VALUE_#POS_OFF#>@TT_Package.GT_STATE_OFF</TT_VALUE_#POS_OFF#>
<MOMENTARY_SWITCH/>
<STATE0_TIMER>0.01</STATE0_TIMER>
<STATE_MAX_TIMER>0</STATE_MAX_TIMER>
</UseTemplate>
</Component>
</Case>
</Switch>
</Case>
</Switch>
</Template>
<Template Name="ASOBO_ELECTRICAL_Push_BatteryCharge_SubTemplate">
<DefaultTemplateParameters>
<PART_ID>ELECTRICAL_Push_BatteryCharge</PART_ID>
<ANIM_NAME>ELECTRICAL_Push_BatteryCharge_#ID#</ANIM_NAME>
<NODE_ID>ELECTRICAL_Push_BatteryCharge_#ID#</NODE_ID>
<WWISE_EVENT_1>batterycharge_push_button_on</WWISE_EVENT_1>
<WWISE_EVENT_2>batterycharge_push_button_off</WWISE_EVENT_2>
</DefaultTemplateParameters>
<Component ID="#NODE_ID#" Node="#NODE_ID#">
<UseTemplate Name="ASOBO_GT_Update">
<FREQUENCY>5</FREQUENCY>
<UPDATE_CODE>
#CHARGE_BUS_ID# (A:1:BUS CONNECTION ON:#HOT_BATTERY_BUS_ID#, Bool)
(L:XMLVAR_BatteryChargeDisabled_#ID#) == if{
#CHARGE_BUS_ID# #HOT_BATTERY_BUS_ID# (>K:2:ELECTRICAL_BUS_TO_BUS_CONNECTION_TOGGLE)
}
</UPDATE_CODE>
</UseTemplate>
<UseTemplate Name = "ASOBO_GT_Push_Button_Airliner">
<LEFT_SINGLE_CODE>(L:XMLVAR_BatteryChargeDisabled_#ID#) ! (>L:XMLVAR_BatteryChargeDisabled_#ID#)</LEFT_SINGLE_CODE>
<SEQ1_EMISSIVE_CODE>0</SEQ1_EMISSIVE_CODE>
<SEQ2_EMISSIVE_CODE>(L:XMLVAR_BatteryChargeDisabled_#ID#)</SEQ2_EMISSIVE_CODE>
</UseTemplate>
</Component>
</Template>
<Template Name="ASOBO_ELECTRICAL_Emissive_Battery_Discharge_SubTemplate">
<DefaultTemplateParameters>
<NODE_ID>ELECTRICAL_Emissive_Battery_Discharge_#ID#</NODE_ID>
</DefaultTemplateParameters>
<UseTemplate Name="ASOBO_GT_Component_Emissive_Gauge">
<EMISSIVE_CODE>(A:ELECTRICAL BATTERY LOAD:#ID#, Amps) 0 ></EMISSIVE_CODE>
</UseTemplate>
</Template>
<Template Name="ASOBO_ELECTRICAL_Starter_Template">
<Parameters Type="Default">
<ANIM_NAME>ELECTRICAL_#INTERACTION_TYPE#_Starter_#ID#</ANIM_NAME>
<NODE_ID>ELECTRICAL_#INTERACTION_TYPE#_Starter_#ID#</NODE_ID>
<PART_ID>ELECTRICAL_#INTERACTION_TYPE#_Starter</PART_ID>
<MOMENTARY_MIN_DURATION>1.5</MOMENTARY_MIN_DURATION>
<Condition Valid="COVERED">
<COVER_NODE_ID>ELECTRICAL_#INTERACTION_TYPE#_Starter_#ID#_Cover</COVER_NODE_ID>
<COVER_ANIM_NAME>ELECTRICAL_#INTERACTION_TYPE#_Starter_#ID#_Cover</COVER_ANIM_NAME>
</Condition>
<STARTER_ID>#ID#</STARTER_ID>
<TOOLTIP_STARTER_TITLE>@TT_Package.ELECTRICAL_PUSH_START_TITLE</TOOLTIP_STARTER_TITLE>
</Parameters>
<Parameters Type="Override">
<TOOLTIP_TITLE>#TOOLTIP_STARTER_TITLE#</TOOLTIP_TITLE>
<TOOLTIP_ENTRY_0>ELECTRICAL_Starter_#ID#</TOOLTIP_ENTRY_0>
<Switch>
<Case Valid="USE_ENFORCED_MOMENTARY_MIN_DURATION">
<STOP_STARTER>(O:_Interacting) ! if{ 0 (>K:SET_STARTER#ID#_HELD) }</STOP_STARTER>
</Case>
<Default>
<STOP_STARTER>0 (>K:SET_STARTER#ID#_HELD)</STOP_STARTER>
</Default>
</Switch>
<Condition Valid="PREVENT_STARTER_RELEASE">
<True>
<RELEASE_STARTER_CODE></RELEASE_STARTER_CODE>
</True>
<False>
<Switch Param="INTERACTION_TYPE">
<Case Value="SWITCH">
<RELEASE_STARTER_CODE>0 (>B:ELECTRICAL_Starter_#ID#_Off)</RELEASE_STARTER_CODE>
</Case>
<Case Value="PUSH">
<RELEASE_STARTER_CODE>0 (>B:ELECTRICAL_Starter_#ID#_Set)</RELEASE_STARTER_CODE>
</Case>
</Switch>
</False>
</Condition>
</Parameters>
<Parameters Type="Default"> <!-- fix name duplication -->
<Condition Valid="COVERED">
<LOCK_NODE_ID>#COVER_NODE_ID#</LOCK_NODE_ID>
<LOCK_ANIM_NAME>#COVER_ANIM_NAME#</LOCK_ANIM_NAME>
</Condition>
</Parameters>
<Switch Param="INTERACTION_TYPE">
<Case Value="SWITCH">
<Condition Valid="COVERED">*
<True>
<UseTemplate Name="ASOBO_GT_Switch_Covered">
<INPUT_EVENT_ID>ELECTRICAL</INPUT_EVENT_ID>
<COVER_IE_NAME>Starter_#ID#_Cover</COVER_IE_NAME>
<COVER_IE_ID_SOURCE>ELECTRICAL</COVER_IE_ID_SOURCE>
<SWITCH_NODE_ID>#NODE_ID#</SWITCH_NODE_ID>
<SWITCH_ANIM_NAME>#ANIM_NAME#</SWITCH_ANIM_NAME>
<COVER_VAR_NAME>XMLVAR_ELECTRICAL_Starter_#ID#_Cover_Opened</COVER_VAR_NAME>
<COVER_VAR_TYPE>I</COVER_VAR_TYPE>
<SWITCH_TYPE>MOMENTARY</SWITCH_TYPE>
<SET_SWITCH_ON>(>B:ELECTRICAL_Starter_#ID#_On)</SET_SWITCH_ON>
<SET_SWITCH_OFF>#RELEASE_STARTER_CODE#</SET_SWITCH_OFF>
<SWITCH_ANIM_CODE>(B:ELECTRICAL_Starter_#ID#, Bool) 100 *</SWITCH_ANIM_CODE>
<WWISE_EVENT_1>starter_switch_on</WWISE_EVENT_1>
<WWISE_EVENT_2>starter_switch_off</WWISE_EVENT_2>
</UseTemplate>
</True>
<False>
<Component ID="#NODE_ID#" Node="#NODE_ID#">
<UseInputEvent ID="ELECTRICAL"/>
<UseTemplate Name="ASOBO_GT_Push_Button">
<OVERRIDE_ANIM_CODE>(B:ELECTRICAL_Starter_#ID#, Bool) 100 *</OVERRIDE_ANIM_CODE>
<LEFT_SINGLE_CODE>(>B:ELECTRICAL_Starter_#ID#_On)</LEFT_SINGLE_CODE>
<LEFT_LEAVE_CODE>#RELEASE_STARTER_CODE#</LEFT_LEAVE_CODE>
<WWISE_EVENT_1>starter_switch_on</WWISE_EVENT_1>
<WWISE_EVENT_2>starter_switch_off</WWISE_EVENT_2>
</UseTemplate>
</Component>
</False>
</Condition>
</Case>
<Case Value="PUSH">
<Component ID="#NODE_ID#" Node="#NODE_ID#">
<UseTemplate Name="ASOBO_GT_Update">
<FREQUENCY>5</FREQUENCY>
<UPDATE_CODE>
(O:XMLVAR_Starter_Held_Down_Duration) 0 > if{
(O:XMLVAR_Starter_Held_Down_Duration) (E:SIMULATION TIME, seconds) < if{
0 (>O:XMLVAR_Starter_Held_Down_Duration)
#STOP_STARTER#
}
}
</UPDATE_CODE>
</UseTemplate>
<UseInputEvent ID="ELECTRICAL"/>
<UseTemplate Name="ASOBO_GT_Push_Button_Held">
<OVERRIDE_ANIM_CODE>(B:ELECTRICAL_Starter_#ID#) 100 *</OVERRIDE_ANIM_CODE>
<SWITCH_POSITION_TYPE>L</SWITCH_POSITION_TYPE>
<SWITCH_POSITION_VAR>XMLVAR_Starter_State</SWITCH_POSITION_VAR>
<Switch>
<Case Valid="USE_ENFORCED_MOMENTARY_MIN_DURATION">
<LEFT_SINGLE_CODE>1 (>O:_Interacting) 1 (>B:ELECTRICAL_Starter_#ID#_Set) #MOMENTARY_MIN_DURATION# (E:SIMULATION TIME, seconds) + (>O:XMLVAR_Starter_Held_Down_Duration)</LEFT_SINGLE_CODE>
<LEFT_LEAVE_CODE>0 (>O:_Interacting) (O:XMLVAR_Starter_Held_Down_Duration) 0 == if{ #RELEASE_STARTER_CODE# }</LEFT_LEAVE_CODE>
<WHEEL_DOWN_CODE>1 (>B:ELECTRICAL_Starter_#ID#_Set) #MOMENTARY_MIN_DURATION# (E:SIMULATION TIME, seconds) + (>O:XMLVAR_Starter_Held_Down_Duration)</WHEEL_DOWN_CODE>
</Case>
<Default>
<LEFT_SINGLE_CODE>1 (>B:ELECTRICAL_Starter_#ID#_Set)</LEFT_SINGLE_CODE>
<LEFT_LEAVE_CODE>#RELEASE_STARTER_CODE#</LEFT_LEAVE_CODE>
<WHEEL_DOWN_CODE>1 (>B:ELECTRICAL_Starter_#ID#_Set) #MOMENTARY_MIN_DURATION# (E:SIMULATION TIME, seconds) + (>O:XMLVAR_Starter_Held_Down_Duration)</WHEEL_DOWN_CODE>
<WHEEL_UP_CODE>#RELEASE_STARTER_CODE# 0 (>O:XMLVAR_Starter_Held_Down_Duration)</WHEEL_UP_CODE>
</Default>
</Switch>
<WWISE_EVENT_1>starter_push_button_on</WWISE_EVENT_1>
<WWISE_EVENT_2>starter_push_button_off</WWISE_EVENT_2>
</UseTemplate>
</Component>
</Case>
</Switch>
</Template>
<Template Name="ASOBO_ELECTRICAL_Knob_Master_SubTemplate">
<Parameters Type="Default">
<NODE_ID>ELECTRICAL_Knob_Master</NODE_ID>
<ANIM_NAME>ELECTRICAL_Knob_Master</ANIM_NAME>
<PART_ID>Electrical_Knob_Master</PART_ID>
<ID_BATTERY>#ID#</ID_BATTERY>
<ID_ALTERNATOR>#ID#</ID_ALTERNATOR>
<ID_STARTER>#ID#</ID_STARTER>
<SWITCH_POSITION_TYPE_ISDOWN>L</SWITCH_POSITION_TYPE_ISDOWN>
<SWITCH_POSITION_VAR_ISDOWN>XMLVAR_Starter_IsHeld</SWITCH_POSITION_VAR_ISDOWN>
<SWITCH_POSITION_TYPE>O</SWITCH_POSITION_TYPE>
<SWITCH_POSITION_VAR>XMLVAR_Master_SwitchState</SWITCH_POSITION_VAR>
<Switch Param="SWITCH_TYPE">
<Case Value="OFF_ON_START">
<POS_OFF>0</POS_OFF>
<POS_ON>1</POS_ON>
<POS_START>2</POS_START>
<SWITCH_DIRECTION>Horizontal</SWITCH_DIRECTION>
<ARROW_TYPE>Curved</ARROW_TYPE>
<ON_MASTER_OFF/>
<ON_MASTER_ON/>
<ON_MASTER_START/>
<INTERACTION_TYPE>Knob</INTERACTION_TYPE>
</Case>
</Switch>
<WWISE_PREFIX>electrical_master</WWISE_PREFIX>
<TOOLTIP_TITLE>@TT_Package.ELECTRICAL_BATTERY_MASTER_TITLE</TOOLTIP_TITLE>
<TT_DESCRIPTION_ID>@TT_Package.ELECTRICAL_BATTERY_MASTER_ACTION_SET</TT_DESCRIPTION_ID>
</Parameters>
<Switch Param="SWITCH_TYPE">
<Case Value="OFF_ON_START">
<UseTemplate Name="ASOBO_ELECTRICAL_Base_Template">
<IE_NAME>Master_#ID#</IE_NAME>
<Switch Param="INTERACTION_TYPE">
<Case Value="Knob">
<KNOB_TYPE>X_STATES</KNOB_TYPE>
</Case>
</Switch>
<NUM_STATES>3</NUM_STATES>
<MOMENTARY_SWITCH/>
<STATE_MAX_TIMER>2</STATE_MAX_TIMER>
<STATE0_TIMER>0</STATE0_TIMER>
<SIMVAR_TO_WATCH_0>GENERAL ENG STARTER:#ID_STARTER#</SIMVAR_TO_WATCH_0>
<SIMVAR_TO_WATCH_1>ELECTRICAL MASTER BATTERY:#ID_BATTERY#</SIMVAR_TO_WATCH_1>
<SIMVAR_TO_WATCH_2>GENERAL ENG MASTER ALTERNATOR:#ID_ALTERNATOR#</SIMVAR_TO_WATCH_2>
<SET_STATE_#POS_OFF#>
#ID_BATTERY# (>K:MASTER_BATTERY_OFF)
#ID_ALTERNATOR# (>K:ALTERNATOR_OFF)
(A:GENERAL ENG STARTER:#ID_STARTER#, Bool) if{ 0 (>K:SET_STARTER#ID_STARTER#_HELD) }
#ON_MASTER_OFF#
</SET_STATE_#POS_OFF#>
<SET_STATE_#POS_ON#>
#ID_BATTERY# (>K:MASTER_BATTERY_ON)
#ID_ALTERNATOR# (>K:ALTERNATOR_ON)
(A:GENERAL ENG STARTER:#ID_STARTER#, Bool) if{ 0 (>K:SET_STARTER#ID_STARTER#_HELD) }
#ON_MASTER_ON#
</SET_STATE_#POS_ON#>
<SET_STATE_#POS_START#>
#ID_BATTERY# (>K:MASTER_BATTERY_ON)
#ID_ALTERNATOR# (>K:ALTERNATOR_ON)
1 (>K:SET_STARTER#ID_STARTER#_HELD)
#ON_MASTER_START#
</SET_STATE_#POS_START#>
<STR_STATE_#POS_OFF#>Off</STR_STATE_#POS_OFF#>
<STR_STATE_#POS_ON#>On</STR_STATE_#POS_ON#>
<STR_STATE_#POS_START#>Start</STR_STATE_#POS_START#>
<TT_VALUE_#POS_OFF#>@TT_Package.GT_STATE_OFF</TT_VALUE_#POS_OFF#>
<TT_VALUE_#POS_ON#>@TT_Package.GT_STATE_ON</TT_VALUE_#POS_ON#>
<TT_VALUE_#POS_START#>@TT_Package.GT_STATE_START</TT_VALUE_#POS_START#>
<GET_STATE_EXTERNAL>(A:GENERAL ENG STARTER:#ID_STARTER#, Bool) sp0 (A:ELECTRICAL MASTER BATTERY:#ID_BATTERY#, Bool) sp1 (A:GENERAL ENG MASTER ALTERNATOR:#ID_ALTERNATOR#, Bool) sp2</GET_STATE_EXTERNAL>
<ENUM_VAL_TO_POS_EXTERNAL>
l1 ! if{
l0 if{ 0 (>K:SET_STARTER#ID_STARTER#_HELD) }
#POS_OFF# sp3 g1
} els{
#POS_START# #POS_ON# l0 ? sp3 g1
} :1 l1 l2 != if{ #ID_ALTERNATOR# (>K:TOGGLE_MASTER_ALTERNATOR) } l3
</ENUM_VAL_TO_POS_EXTERNAL>
</UseTemplate>
</Case>
</Switch>
</Template>
<Template Name="ASOBO_ELECTRICAL_Switch_Battery_STBY_SubTemplate">
<DefaultTemplateParameters>
<ANIM_NAME>ELECTRICAL_Switch_Battery_STBY</ANIM_NAME>
<NODE_ID>ELECTRICAL_Switch_Battery_STBY</NODE_ID>
<PART_ID>ELECTRICAL_Switch_Battery_STBY</PART_ID>
<BATTERY_ID>#ID#</BATTERY_ID>
<Condition Check="TEST_LIGHT_NODE_ID">
<SWITCH_POS_TEST>2</SWITCH_POS_TEST>
</Condition>
<TOGGLE_COND>1</TOGGLE_COND>
<TOGGLE_CODE></TOGGLE_CODE>
<TOOLTIP_BATTERY_TITLE>@TT_Package.ELECTRICAL_SWITCH_BATTERY_STANDBY_TITLE</TOOLTIP_BATTERY_TITLE>
</DefaultTemplateParameters>
<OverrideTemplateParameters>
<TOOLTIP_TITLE>#TOOLTIP_BATTERY_TITLE#</TOOLTIP_TITLE>
<TOOLTIP_ENTRY_0>ELECTRICAL_Battery_STBY_#BATTERY_ID#</TOOLTIP_ENTRY_0>
<CODE_POS_0>
(A:ELECTRICAL MASTER BATTERY:#BATTERY_ID#, bool) ! if{
#BATTERY_ID# (>K:TOGGLE_MASTER_BATTERY)
}
#TOGGLE_COND# if{
#TOGGLE_CODE#
}
0 (>L:XMLVAR_STBYBattery_Test)
</CODE_POS_0>
<CODE_POS_1>
(A:ELECTRICAL MASTER BATTERY:#BATTERY_ID#, bool) if{
#BATTERY_ID# (>K:TOGGLE_MASTER_BATTERY)
}
#TOGGLE_COND# if{
#TOGGLE_CODE#
}
0 (>L:XMLVAR_STBYBattery_Test)
</CODE_POS_1>
<CODE_POS_2>
(A:ELECTRICAL MASTER BATTERY:#BATTERY_ID#, bool) if{
#BATTERY_ID# (>K:TOGGLE_MASTER_BATTERY)
}
1 (>L:XMLVAR_STBYBattery_Test)
</CODE_POS_2>
<STATE0_TEST>(L:XMLVAR_STBYBattery_Test) ! (A:ELECTRICAL MASTER BATTERY:#BATTERY_ID#, bool)</STATE0_TEST>
<STATE1_TEST>(L:XMLVAR_STBYBattery_Test) ! (A:ELECTRICAL MASTER BATTERY:#BATTERY_ID#, bool) ! and</STATE1_TEST>
<STATE2_TEST>(L:XMLVAR_STBYBattery_Test) (A:ELECTRICAL MASTER BATTERY:#BATTERY_ID#, bool) ! and</STATE2_TEST>
<SWITCH_POSITION_TYPE>L</SWITCH_POSITION_TYPE>
<SWITCH_POSITION_VAR>XMLVAR_BatterySTBY_SwitchState</SWITCH_POSITION_VAR>
</OverrideTemplateParameters>
<Component ID="ELECTRICAL_Battery_STBY">
<Component ID="#NODE_ID#" Node="#NODE_ID#">
<Update Frequency="5">
#TOGGLE_COND# if{
#TOGGLE_CODE#
}
</Update>
<UseInputEvent ID="ELECTRICAL">
<STBY_BATTERY_ID>#BATTERY_ID#</STBY_BATTERY_ID>
<LOCAL_VAR_TO_WATCH_0>#SWITCH_POSITION_VAR#</LOCAL_VAR_TO_WATCH_0>
</UseInputEvent>
<UseTemplate Name="ASOBO_GT_Switch_3States">
<MOMENTARY_SWITCH/>
<SWITCH_POSITION_TYPE_ISDOWN>L</SWITCH_POSITION_TYPE_ISDOWN>
<SWITCH_POSITION_VAR_ISDOWN>XMLVAR_STBYBattery_IsHeld</SWITCH_POSITION_VAR_ISDOWN>
<STATE_MAX_TIMER>0.1</STATE_MAX_TIMER>
<STATE0_TIMER>0</STATE0_TIMER>
<ANIMTIP_0>TT:COCKPIT.TOOLTIPS.BATTERY_STBY_ARM</ANIMTIP_0>
<ANIMTIP_1>TT:COCKPIT.TOOLTIPS.BATTERY_STBY_OFF</ANIMTIP_1>
<ANIMTIP_2>TT:COCKPIT.TOOLTIPS.BATTERY_STBY_TEST</ANIMTIP_2>
</UseTemplate>
</Component>
<Condition Check="TEST_LIGHT_NODE_ID">
<Component ID="#TEST_LIGHT_NODE_ID#" Node="#TEST_LIGHT_NODE_ID#">
<UseTemplate Name="ASOBO_GT_Emissive_Gauge">
<PART_ID/>
<FAILURE>(A:ELECTRICAL BATTERY VOLTAGE:#BATTERY_ID#, volts) 17.0 ></FAILURE>
<EMISSIVE_CODE>(L:XMLVAR_STBYBattery_Test)</EMISSIVE_CODE>
</UseTemplate>
</Component>
</Condition>
</Component>
</Template>
<Template Name="ASOBO_ELECTRICAL_Switch_Alternator_STBY_SubTemplate">
<Parameters Type="Default">
<ANIM_NAME>ELECTRICAL_Switch_Alternator_STBY_#ID#</ANIM_NAME>
<NODE_ID>ELECTRICAL_Switch_Alternator_STBY_#ID#</NODE_ID>
<PART_ID>ELECTRICAL_Switch_Alternator_STBY</PART_ID>
<GEN_ID>2</GEN_ID>
<WWISE_EVENT_1>alternator_switch_on</WWISE_EVENT_1>
<WWISE_EVENT_2>alternator_switch_off</WWISE_EVENT_2>
</Parameters>
<Parameters Type="Override">
<IE_CONNECTION_ID>Bus_Alternator_Standby</IE_CONNECTION_ID>
</Parameters>
<UseTemplate Name="ASOBO_ELECTRICAL_Switch_Connection_Template">
<ON_CONNECTION_ON>#GEN_ID# (>K:ALTERNATOR_ON)</ON_CONNECTION_ON>
<ON_CONNECTION_OFF>#GEN_ID# (>K:ALTERNATOR_OFF)</ON_CONNECTION_OFF>
<SIMVAR_TO_WATCH_0>GENERAL ENG MASTER ALTERNATOR:#GEN_ID#</SIMVAR_TO_WATCH_0>
<IS_CONNECTION_ON>(A:GENERAL ENG MASTER ALTERNATOR:#GEN_ID#, Bool) and</IS_CONNECTION_ON>
<ENSURE_VARIABLE_CONSISTENCY>(A:GENERAL ENG MASTER ALTERNATOR:#GEN_ID#, Bool) s0 (B:ELECTRICAL_#IE_CONNECTION_ID#, Bool) != if{ l0 (>B:ELECTRICAL_#IE_CONNECTION_ID#_Set) }</ENSURE_VARIABLE_CONSISTENCY>
<TT_DESCRIPTION_ID>@TT_Package.ELECTRICAL_ALTERNATOR_STANBY_ACTION_SET</TT_DESCRIPTION_ID>
<TOOLTIP_TITLE>@TT_Package.ELECTRICAL_ALTERNATOR_STANBY_TITLE</TOOLTIP_TITLE>
</UseTemplate>
<Condition Check="LIGHT_NODE_ID">
<Component ID="#LIGHT_NODE_ID#" Node="#LIGHT_NODE_ID#">
<Parameters Type="Default">
<DEFAULT_EMISSIVE>0.1</DEFAULT_EMISSIVE>
</Parameters>
<UseTemplate Name="ASOBO_GT_Emissive_Gauge">
<EMISSIVE_CODE>#SOURCE_BUS_ID# (A:1:BUS CONNECTION ON:#DESTINATION_BUS#, Bool) #DEFAULT_EMISSIVE# *</EMISSIVE_CODE>
</UseTemplate>
</Component>
</Condition>
</Template>
<!-- Required: SOURCE_BUS_ID & AVIONICS_BUS_ID (found in system.xml) -->
<Template Name="ASOBO_ELECTRICAL_Avionics_Bus_SubTemplate">
<Parameters Type="Default">
<ANIM_NAME>ELECTRICAL_#INTERACTION_TYPE#_Avionics_Bus_#ID#</ANIM_NAME>
<NODE_ID>ELECTRICAL_#INTERACTION_TYPE#_Avionics_Bus_#ID#</NODE_ID>
<PART_ID>ELECTRICAL_#INTERACTION_TYPE#_Avionics_Master</PART_ID>
<WWISE_PREFIX>avionic</WWISE_PREFIX>
<TOOLTIP_TITLE>@TT_Package.ELECTRICAL_SWITCH_AVIONICS_MASTER_TITLE</TOOLTIP_TITLE>
<TT_DESCRIPTION_ID>@TT_Package.ELECTRICAL_SWITCH_AVIONICS_MASTER_ACTION_SET</TT_DESCRIPTION_ID>
<IE_AVIONICS_BUS_ID>#ID#</IE_AVIONICS_BUS_ID>
<Switch Param="TYPE">
<Case Value="MULTI_BUS">
<Switch Param="MULTI_BUS_TYPE">
<Case Value="ON_OFF_COMPOSITE">
<POS_ON>0</POS_ON>
<POS_OFF>1</POS_OFF>
<POS_COMPOSITE>2</POS_COMPOSITE>
<ID_COMPOSITE>2</ID_COMPOSITE>
<TT_VALUE_COMPOSITE>@TT_Package.GT_STATE_DISPATCH</TT_VALUE_COMPOSITE>
<STR_STATE_COMPOSITE>Composite</STR_STATE_COMPOSITE>
</Case>
</Switch>
<AVIONICS_BUS_ID_1>1</AVIONICS_BUS_ID_1>
<SOURCE_BUS_ID_1>-1</SOURCE_BUS_ID_1>
<AVIONICS_CIRCUIT_ID_1>1</AVIONICS_CIRCUIT_ID_1>
<AVIONICS_BUS_ID_2>1</AVIONICS_BUS_ID_2>
<SOURCE_BUS_ID_2>-1</SOURCE_BUS_ID_2>
<AVIONICS_CIRCUIT_ID_2>1</AVIONICS_CIRCUIT_ID_2>
</Case>
<Default>
<AVIONICS_BUS_ID>1</AVIONICS_BUS_ID>
<SOURCE_BUS_ID>-1</SOURCE_BUS_ID>
<AVIONICS_CIRCUIT_ID>1</AVIONICS_CIRCUIT_ID>
</Default>
</Switch>
</Parameters>
<Parameters Type="Override">
<Condition NotEmpty="IE_NAME">
<False>
<IE_NAME>Avionics_Bus_#IE_AVIONICS_BUS_ID#</IE_NAME>
</False>
</Condition>
</Parameters>
<Parameters Type="Override">
<Switch Param="TYPE">
<Case Value="MULTI_BUS">
<SET_CONNECTION_0>
s0 (A:CIRCUIT SWITCH ON:#AVIONICS_CIRCUIT_ID_1#, Bool) != if{ #AVIONICS_CIRCUIT_ID_1# (>K:ELECTRICAL_CIRCUIT_TOGGLE) }
(A:CIRCUIT SWITCH ON:#AVIONICS_CIRCUIT_ID_1#, Bool) #SOURCE_BUS_ID_1# (A:1:BUS CONNECTION ON:#AVIONICS_BUS_ID_1#, Bool) != if{
#AVIONICS_BUS_ID_1# #SOURCE_BUS_ID_1# (>K:2:ELECTRICAL_BUS_TO_BUS_CONNECTION_TOGGLE)
}
</SET_CONNECTION_0>
<SET_CONNECTION_1>
s0 (A:CIRCUIT SWITCH ON:#AVIONICS_CIRCUIT_ID_2#, Bool) != if{ #AVIONICS_CIRCUIT_ID_2# (>K:ELECTRICAL_CIRCUIT_TOGGLE) }
(A:CIRCUIT SWITCH ON:#AVIONICS_CIRCUIT_ID_2#, Bool) #SOURCE_BUS_ID_2# (A:1:BUS CONNECTION ON:#AVIONICS_BUS_ID_2#, Bool) != if{
#AVIONICS_BUS_ID_2# #SOURCE_BUS_ID_2# (>K:2:ELECTRICAL_BUS_TO_BUS_CONNECTION_TOGGLE)
}
</SET_CONNECTION_1>
<SIMVAR_TO_WATCH_0>CIRCUIT SWITCH ON:#AVIONICS_CIRCUIT_ID_1#</SIMVAR_TO_WATCH_0>
<SIMVAR_TO_WATCH_1>CIRCUIT SWITCH ON:#AVIONICS_CIRCUIT_ID_2#</SIMVAR_TO_WATCH_1>
</Case>
<Default>
<SET_CONNECTION>
s0 (A:CIRCUIT SWITCH ON:#AVIONICS_CIRCUIT_ID#, Bool) != if{ #AVIONICS_CIRCUIT_ID# (>K:ELECTRICAL_CIRCUIT_TOGGLE) }
(A:CIRCUIT SWITCH ON:#AVIONICS_CIRCUIT_ID#, Bool) #SOURCE_BUS_ID# (A:1:BUS CONNECTION ON:#AVIONICS_BUS_ID#, Bool) != if{
#AVIONICS_BUS_ID# #SOURCE_BUS_ID# (>K:2:ELECTRICAL_BUS_TO_BUS_CONNECTION_TOGGLE)
}
</SET_CONNECTION>
<SIMVAR_TO_WATCH_0>CIRCUIT SWITCH ON:#AVIONICS_CIRCUIT_ID#</SIMVAR_TO_WATCH_0>
</Default>
</Switch>
</Parameters>
<UseTemplate Name="ASOBO_ELECTRICAL_Base_Template">
<Switch Param="TYPE">
<Case Value="MULTI_BUS">
<GET_STATE_EXTERNAL>(A:#SIMVAR_TO_WATCH_0#, Bool) sp0 (A:#SIMVAR_TO_WATCH_1#, Bool) sp1</GET_STATE_EXTERNAL>
<Switch Param="MULTI_BUS_TYPE">
<Case Value="ON_OFF_COMPOSITE">
<NUM_STATES>3</NUM_STATES>
<STR_STATE_#POS_ON#>On</STR_STATE_#POS_ON#>
<STR_STATE_#POS_OFF#>Off</STR_STATE_#POS_OFF#>
<STR_STATE_#POS_COMPOSITE#>#STR_STATE_COMPOSITE#</STR_STATE_#POS_COMPOSITE#>
<TT_VALUE_#POS_ON#>@TT_Package.GT_STATE_ON</TT_VALUE_#POS_ON#>
<TT_VALUE_#POS_OFF#>@TT_Package.GT_STATE_OFF</TT_VALUE_#POS_OFF#>
<TT_VALUE_#POS_COMPOSITE#>#TT_VALUE_COMPOSITE#</TT_VALUE_#POS_COMPOSITE#>
<SET_STATE_#POS_ON#>1 #SET_CONNECTION_0# 1 #SET_CONNECTION_1#</SET_STATE_#POS_ON#>
<SET_STATE_#POS_OFF#>0 #SET_CONNECTION_0# 0 #SET_CONNECTION_1#</SET_STATE_#POS_OFF#>
<Switch Param="ID_COMPOSITE">
<Case Value="1">
<SET_STATE_#POS_COMPOSITE#>1 #SET_CONNECTION_0# 0 #SET_CONNECTION_1#</SET_STATE_#POS_COMPOSITE#>
<ENUM_VAL_TO_POS_EXTERNAL>
l0 l1 ! and if{ #POS_COMPOSITE# sp2 g2 }
l0 l1 and if{ #POS_ON# sp2 g2 }
l0 ! l1 ! and if{ #POS_OFF# sp2 g2 }
els{ l0 l1 or s0 sp1 }
:2 l0 #SET_CONNECTION_0# l1 #SET_CONNECTION_1# l2
</ENUM_VAL_TO_POS_EXTERNAL>
</Case>
<Case Value="2">
<SET_STATE_#POS_COMPOSITE#>0 #SET_CONNECTION_0# 1 #SET_CONNECTION_1#</SET_STATE_#POS_COMPOSITE#>
<ENUM_VAL_TO_POS_EXTERNAL>
l0 ! l1 and if{ #POS_COMPOSITE# sp2 g2 }
l0 l1 and if{ #POS_ON# sp2 g2 }
l0 ! l1 ! and if{ #POS_OFF# sp2 g2 }
els{ l0 l1 or s0 sp1 }
:2 l0 #SET_CONNECTION_0# l1 #SET_CONNECTION_1# l2
</ENUM_VAL_TO_POS_EXTERNAL>
</Case>
</Switch>
</Case>
<Default>
<SET_STATE_EXTERNAL>p0 #SET_CONNECTION_0# p0 #SET_CONNECTION_1#</SET_STATE_EXTERNAL>
<ENUM_VAL_TO_POS_EXTERNAL>l0 l1 != if{ l0 sp1 } l0 l1 and sp2 l0 #SET_CONNECTION_0# l1 #SET_CONNECTION_1# l2</ENUM_VAL_TO_POS_EXTERNAL>
</Default>
</Switch>
</Case>
<Default>
<SET_STATE_EXTERNAL>p0 #SET_CONNECTION#</SET_STATE_EXTERNAL>
<GET_STATE_EXTERNAL>(A:#SIMVAR_TO_WATCH_0#, Bool) sp0</GET_STATE_EXTERNAL>
<ENUM_VAL_TO_POS_EXTERNAL>l0 #SET_CONNECTION# (A:#SIMVAR_TO_WATCH_0#, Bool)</ENUM_VAL_TO_POS_EXTERNAL>
</Default>
</Switch>
</UseTemplate>
</Template>
<Template Name="ASOBO_ELECTRICAL_Switch_Essential_Bus_SubTemplate">
<Parameters Type="Default">
<NODE_ID>ELECTRICAL_Switch_Essential_Bus</NODE_ID>
<ANIM_NAME>ELECTRICAL_Switch_Essential_Bus</ANIM_NAME>
<PART_ID>ELECTRICAL_Switch_Essential_Bus</PART_ID>
<MAIN_BUS_ID>1</MAIN_BUS_ID>
<ESSENTIAL_BUS_ID>2</ESSENTIAL_BUS_ID>
<BATTERY_BUS_ID>3</BATTERY_BUS_ID>
<Condition Check="USE_ESSENTIALS_ON_INDICATOR">
<EMISSIVE_NODE_ID>ELECTRICAL_Light_Essential_Bus</EMISSIVE_NODE_ID>
</Condition>
<TOOLTIP_ESSENTIAL_BUS_TITLE>@TT_Package.SAFETY_SWITCH_ESSENTIALBUS_TITLE</TOOLTIP_ESSENTIAL_BUS_TITLE>
</Parameters>
<Parameters Type="Override">
<TOOLTIP_TITLE>#TOOLTIP_ESSENTIAL_BUS_TITLE#</TOOLTIP_TITLE>
<TOOLTIP_ENTRY_0>ELECTRICAL_EssentialBus_#ESSENTIAL_BUS_ID#</TOOLTIP_ENTRY_0>
</Parameters>
<Component ID="#NODE_ID#_#ID#" Node="#NODE_ID#">
<UseInputEvent ID="ELECTRICAL"/>
<UseTemplate Name="ASOBO_GT_Switch_Code">
<ANIM_CODE>(B:ELECTRICAL_EssentialBus_#ESSENTIAL_BUS_ID#) 100 *</ANIM_CODE>
<LEFT_SINGLE_CODE>(>B:ELECTRICAL_EssentialBus_#ESSENTIAL_BUS_ID#_Toggle)</LEFT_SINGLE_CODE>
</UseTemplate>
</Component>
<Condition Check="USE_ESSENTIALS_ON_INDICATOR">
<Component ID="#EMISSIVE_NODE_ID#" Node="#EMISSIVE_NODE_ID#">
<UseTemplate Name="ASOBO_GT_Emissive_Gauge">
<EMISSIVE_CODE>(B:ELECTRICAL_EssentialBus_#ESSENTIAL_BUS_ID#)</EMISSIVE_CODE>
</UseTemplate>
</Component>
</Condition>
</Template>
<Template Name="ASOBO_ELECTRICAL_Switch_Bus_SubTemplate">
<DefaultTemplateParameters>
<NODE_ID>ELECTRICAL_Switch_Bus_#ID#</NODE_ID>
<ANIM_NAME>ELECTRICAL_Switch_Bus_#ID#</ANIM_NAME>
<PART_ID>ELECTRICAL_Switch_Bus</PART_ID>
<WWISE_EVENT_1>bus_tie_switch_on</WWISE_EVENT_1>
<WWISE_EVENT_2>bus_tie_switch_off</WWISE_EVENT_2>
<AUDIO_NORMALIZED_TIME_1>0.1</AUDIO_NORMALIZED_TIME_1>
<AUDIO_NORMALIZED_TIME_2>0.5</AUDIO_NORMALIZED_TIME_2>
<ON_TOOLTIP></ON_TOOLTIP>
<OFF_TOOLTIP></OFF_TOOLTIP>
</DefaultTemplateParameters>
<OverrideTemplateParameters>
<LEFT_SINGLE_CODE>#SOURCE_ID# #ID# (>K:2:ELECTRICAL_BUS_TO_BUS_CONNECTION_TOGGLE)</LEFT_SINGLE_CODE>
<Switch Param="TYPE">
<Case Value="BOEING">
<IS_AIRLINER>True</IS_AIRLINER>
<SEQ1_EMISSIVE_CODE>#SOURCE_ID# (A:1:BUS CONNECTION ON:#ID#, Bool)</SEQ1_EMISSIVE_CODE>
<SEQ2_EMISSIVE_CODE>#SOURCE_ID# (A:1:BUS CONNECTION ON:#ID#, Bool) !</SEQ2_EMISSIVE_CODE>
<TOOLTIPID>%(#SOURCE_ID# (A:1:BUS CONNECTION ON:#ID#, Bool) !)%{if}TT:#OFF_TOOLTIP#%{else}TT:#ON_TOOLTIP#%{end}</TOOLTIPID>
</Case>
<Default>
<IS_AIRLINER>False</IS_AIRLINER>
</Default>
</Switch>
</OverrideTemplateParameters>
<Condition Check="IS_AIRLINER" Match="True">
<True>
<UseTemplate Name="ASOBO_GT_Push_Button_Airliner">
</UseTemplate>
</True>
<False>
<Component ID="#NODE_ID#" Node="#NODE_ID#">
<UseTemplate Name="ASOBO_GT_Push_Button">
</UseTemplate>
</Component>
</False>
</Condition>
</Template>
<Template Name="ASOBO_ELECTRICAL_Circuit_SubTemplate">
<Parameters Type="Default">
<NODE_ID>ELECTRICAL_#INTERACTION_TYPE#_Circuit_#ID#</NODE_ID>
<ANIM_NAME>ELECTRICAL_#INTERACTION_TYPE#_Circuit_#ID#</ANIM_NAME>
<PART_ID>ELECTRICAL_#INTERACTION_TYPE#_Circuit</PART_ID>
<Switch Param="INTERACTION_TYPE">
<Case Value="Switch">
<WWISE_EVENT_1>electrical_circuit_switch_on</WWISE_EVENT_1>
<WWISE_EVENT_2>electrical_circuit_switch_off</WWISE_EVENT_2>
<AUDIO_NORMALIZED_TIME_1>0.1</AUDIO_NORMALIZED_TIME_1>
<AUDIO_NORMALIZED_TIME_2>0.5</AUDIO_NORMALIZED_TIME_2>
</Case>
<Case Value="Push">
<WWISE_EVENT_1>electrical_circuit_switch_on</WWISE_EVENT_1>
<WWISE_EVENT_2>electrical_circuit_switch_off</WWISE_EVENT_2>
<NORMALIZED_TIME_1>0.1</NORMALIZED_TIME_1>
<NORMALIZED_TIME_2>0.5</NORMALIZED_TIME_2>
</Case>
</Switch>
<IE_CIRCUIT_ID>Circuit_#CIRCUIT_ID#</IE_CIRCUIT_ID>
</Parameters>
<Parameters Type="Override">
<BTN_ID>#IE_CIRCUIT_ID#</BTN_ID>
<IS_CIRCUIT_ON>(A:CIRCUIT SWITCH ON:#CIRCUIT_ID#, Bool)</IS_CIRCUIT_ON>
</Parameters>
<Component ID="#NODE_ID#" Node="#NODE_ID#">
<Parameters Type="Override">
<TOOLTIP_ENTRY_0>ELECTRICAL_#BTN_ID#</TOOLTIP_ENTRY_0>
</Parameters>
<UseInputEvent ID="ELECTRICAL">
<SET_STATE_EXTERNAL>#IS_CIRCUIT_ON# p0 != if{ #CIRCUIT_ID# (>K:ELECTRICAL_CIRCUIT_TOGGLE) }</SET_STATE_EXTERNAL>
<GET_STATE_EXTERNAL>#IS_CIRCUIT_ON# sp0</GET_STATE_EXTERNAL>
<SIM_STATE_IS_ON_EXTERNAL>l0</SIM_STATE_IS_ON_EXTERNAL>
<SIMVAR_TO_WATCH_0>CIRCUIT SWITCH ON:#CIRCUIT_ID#</SIMVAR_TO_WATCH_0>
<ANIM>EXTERNAL</ANIM>
</UseInputEvent>
<Switch Param="INTERACTION_TYPE">
<Case Value="Switch">
<UseTemplate Name="ASOBO_GT_Switch_Code">
<ANIM_CODE>(B:ELECTRICAL_#BTN_ID#, Bool) 100 *</ANIM_CODE>
<LEFT_SINGLE_CODE>(>B:ELECTRICAL_#BTN_ID#_Toggle)</LEFT_SINGLE_CODE>
</UseTemplate>
</Case>
<Case Value="Push">
<UseTemplate Name="ASOBO_GT_Push_Button">
<LEFT_SINGLE_CODE>(>B:ELECTRICAL_#BTN_ID#_Toggle)</LEFT_SINGLE_CODE>
</UseTemplate>
</Case>
</Switch>
</Component>
</Template>
<!-- Required: CIRCUIT_NAME -->
<Template Name="ASOBO_ELECTRICAL_Switch_Breaker_Template">
<DefaultTemplateParameters>
<BUS_INDEX>-1</BUS_INDEX>
<WWISE_EVENT_1>breaker_switch_on</WWISE_EVENT_1>
<WWISE_EVENT_2>breaker_switch_off</WWISE_EVENT_2>
</DefaultTemplateParameters>
<Component ID="#NODE_ID#" Node="#NODE_ID#">
<Condition Check="NEW_IE">
<True>
<Parameters Type="Default">
<ANIM_NAME>ELECTRICAL_BREAKER_COM</ANIM_NAME>
</Parameters>
<UseTemplate Name="ASOBO_ELECTRICAL_Base_Template">
<EXTRA_OPTION/>
<CREATE_COMPONENT>False</CREATE_COMPONENT>
<IE_NAME>RADIO_Breaker</IE_NAME>
<WWISE_PREFIX>breaker</WWISE_PREFIX>
<TOOLTIP_TITLE>@TT_Package.GT_STATE_COM</TOOLTIP_TITLE>
<TT_DESCRIPTION>@TT_Package.AS510_SWITCH_POWER_ACTION</TT_DESCRIPTION>
<TT_DESCRIPTION_IS_DYNAMIC>@TT_Package.AS510_SWITCH_POWER_ACTION</TT_DESCRIPTION_IS_DYNAMIC>
<SET_STATE_EXTERNAL>#CIRCUIT_INDEX# #BUS_INDEX# (>K:2:ELECTRICAL_CIRCUIT_BREAKER_TOGGLE)</SET_STATE_EXTERNAL>
<GET_STATE_EXTERNAL>(A:CIRCUIT ON:#CIRCUIT_INDEX#, Bool) sp0</GET_STATE_EXTERNAL>
<TT_VALUE>(A:CIRCUIT ON:#CIRCUIT_INDEX#, Bool) @TT_OnOff_Cond</TT_VALUE>
<TT_VALUE_IS_DYNAMIC>True</TT_VALUE_IS_DYNAMIC>
<INTERACTION_TYPE>Switch</INTERACTION_TYPE>
<INIT_CODE/>
<INVERT_ANIM/>
</UseTemplate>
</True>
<False>
<UseTemplate Name="ASOBO_GT_Switch_Code">
<Condition Check="CIRCUIT_INDEX">
<True>
<ANIM_CODE>#BUS_INDEX# (>A:BUS LOOKUP INDEX, Number) (A:CIRCUIT BREAKER PULLED:#CIRCUIT_INDEX#, Bool) 100 *</ANIM_CODE>
<LEFT_SINGLE_CODE>#CIRCUIT_INDEX# #BUS_INDEX# (>K:2:ELECTRICAL_CIRCUIT_BREAKER_TOGGLE)</LEFT_SINGLE_CODE>
</True>
<False>
<ANIM_CODE>(A:BREAKER #CIRCUIT_NAME#, Bool) 100 *</ANIM_CODE>
<LEFT_SINGLE_CODE>(>K:BREAKER_#CIRCUIT_NAME#_TOGGLE)</LEFT_SINGLE_CODE>
</False>
</Condition>
</UseTemplate>
</False>
</Condition>
</Component>
</Template>
<Template Name="ASOBO_ELECTRICAL_Emissive_Bus_SubTemplate">
<UseTemplate Name="ASOBO_GT_Component_Emissive_Gauge">
<EMISSIVE_CODE>(A:ELECTRICAL MAIN BUS VOLTAGE:#BUS_INDEX#, volts) 0 ==</EMISSIVE_CODE>
</UseTemplate>
</Template>
<Template Name="ASOBO_ELECTRICAL_Procedure_SubTemplate">
<Parameters Type="Default">
<NODE_ID>ELECTRICAL_#INTERACTION_TYPE#_Procedure</NODE_ID>
<ANIM_NAME>ELECTRICAL_#INTERACTION_TYPE#_Procedure</ANIM_NAME>
<PROC_ID>1</PROC_ID>
<IE_PROC_ID>Procedure_#ID#</IE_PROC_ID>
<Switch Param="INTERACTION_TYPE">
<Case Value="Switch">
<ANIM_CODE>#IS_ON# 100 *</ANIM_CODE>
</Case>
</Switch>
<TOOLTIP_TITLE>@TT_OverrideMe_Title</TOOLTIP_TITLE>
<TT_DESCRIPTION_ID>@TT_OverrideMe_Description</TT_DESCRIPTION_ID>
</Parameters>
<Parameters Type="Override">
<TOOLTIP_ENTRY_0>ELECTRICAL_#IE_PROC_ID#</TOOLTIP_ENTRY_0>
<LEFT_SINGLE_CODE>(>B:ELECTRICAL_#IE_PROC_ID#_Toggle)</LEFT_SINGLE_CODE>
</Parameters>
<Component ID="#NODE_ID#_#ID#" Node="#NODE_ID#">
<UseInputEvent ID="ELECTRICAL">
<BTN_ID>#IE_PROC_ID#</BTN_ID>
<SET_STATE_ON>0 #PROC_ID# (>K:2:ELECTRICAL_EXECUTE_PROCEDURE)</SET_STATE_ON>
<SET_STATE_OFF>1 #PROC_ID# (>K:2:ELECTRICAL_EXECUTE_PROCEDURE)</SET_STATE_OFF>
<GET_STATE_EXTERNAL>#IS_ON# sp0</GET_STATE_EXTERNAL>
<SIM_STATE_IS_ON_EXTERNAL>l0</SIM_STATE_IS_ON_EXTERNAL>
</UseInputEvent>
<Switch Param="INTERACTION_TYPE">
<Case Value="Switch">
<UseTemplate Name="ASOBO_GT_Switch_Code"/>
</Case>
<Case Value="Push">
<UseTemplate Name="ASOBO_GT_Push_Button"/>
</Case>
</Switch>
</Component>
</Template>
<!-- #################################################### -->
</ModelBehaviors>
Templates
Template list
- ASOBO_ELECTRICAL_Battery_SubTemplate
- ASOBO_ELECTRICAL_Avionics_Master_SubTemplate
- ASOBO_ELECTRICAL_Engine_Bleed_SubTemplate
- ASOBO_ELECTRICAL_Switch_APU_Bleed_SubTemplate
- ASOBO_ELECTRICAL_APU_Starter_SubTemplate
- ASOBO_ELECTRICAL_APU_Generator_SubTemplate
- ASOBO_ELECTRICAL_Alternator_SubTemplate
- ASOBO_ELECTRICAL_ExternalPower_Template
- ASOBO_ELECTRICAL_Push_BatteryCharge_SubTemplate
- ASOBO_ELECTRICAL_Emissive_Battery_Discharge_SubTemplate
- ASOBO_ELECTRICAL_Starter_Template
- ASOBO_ELECTRICAL_Knob_Master_SubTemplate
- ASOBO_ELECTRICAL_Switch_Battery_STBY_SubTemplate
- ASOBO_ELECTRICAL_Switch_Alternator_STBY_SubTemplate
- ASOBO_ELECTRICAL_Avionics_Bus_SubTemplate
- ASOBO_ELECTRICAL_Switch_Essential_Bus_SubTemplate
- ASOBO_ELECTRICAL_Switch_Bus_SubTemplate
- ASOBO_ELECTRICAL_Circuit_SubTemplate
- ASOBO_ELECTRICAL_Switch_Breaker_Template
- ASOBO_ELECTRICAL_Emissive_Bus_SubTemplate
- ASOBO_ELECTRICAL_Procedure_SubTemplate
-
ASOBO_ELECTRICAL_Battery_SubTemplate
Definition from XML<Template Name="ASOBO_ELECTRICAL_Battery_SubTemplate"> <Parameters Type="Default"> <ANIM_NAME>ELECTRICAL_#INTERACTION_TYPE#_Battery_Master_#ID#</ANIM_NAME> <NODE_ID>ELECTRICAL_#INTERACTION_TYPE#_Battery_Master_#ID#</NODE_ID> <PART_ID>ELECTRICAL_#INTERACTION_TYPE#_Battery_Master</PART_ID> <Condition Valid="IS_AIRLINER"> <ANIM_NAME_LOCK>ELECTRICAL_#INTERACTION_TYPE#_Battery_Master_#ID#_Lock</ANIM_NAME_LOCK> <NODE_ID_LOCK>ELECTRICAL_#INTERACTION_TYPE#_Battery_Master_#ID#_Lock</NODE_ID_LOCK> <FAULT_NODE_ID>ELECTRICAL_#INTERACTION_TYPE#_Battery_Master_Fault_#ID#</FAULT_NODE_ID> <OFF_NODE_ID>ELECTRICAL_#INTERACTION_TYPE#_Battery_Master_Off_#ID#</OFF_NODE_ID> <ON_NODE_ID>ELECTRICAL_#INTERACTION_TYPE#_Battery_Master_On_#ID#</ON_NODE_ID> </Condition> <Switch Param="INTERACTION_TYPE"> <Case Value="Switch"> <Condition Check="TYPE"> <SWITCH_TYPE>#TYPE#</SWITCH_TYPE> </Condition> </Case> </Switch> </Parameters> <Parameters Type="Default"> <Switch Param="INTERACTION_TYPE"> <Case Value="Switch"> <WWISE_EVENT_1>battery_switch_on</WWISE_EVENT_1> <WWISE_EVENT_2>battery_switch_off</WWISE_EVENT_2> <Switch Param="SWITCH_TYPE"> <Case Value="ON_OFF_EMERGENCY"> <MAIN_BUS_ID>1</MAIN_BUS_ID> <ESSENTIAL_BUS_ID>2</ESSENTIAL_BUS_ID> <BATTERY_BUS_ID>3</BATTERY_BUS_ID> </Case> <Case Value="LOCKED"> <LOCK_NODE_ID>#NODE_ID#_Lock</LOCK_NODE_ID> <LOCK_ANIM_NAME>#ANIM_NAME#_Lock</LOCK_ANIM_NAME> <COVER_IE_NAME>Battery_#ID#_Cover</COVER_IE_NAME> <COVER_IE_ID_SOURCE>ELECTRICAL</COVER_IE_ID_SOURCE> </Case> </Switch> </Case> </Switch> <Condition Check="SET_AVIONIC_CIRCUIT"> <True> <ON_TOGGLE_MASTER_BATTERY> (A:ELECTRICAL MASTER BATTERY:1, Bool) (A:AVIONICS MASTER SWITCH,Bool) != if{ (>K:TOGGLE_AVIONICS_MASTER) } </ON_TOGGLE_MASTER_BATTERY> </True> <False> <ON_TOGGLE_MASTER_BATTERY/> </False> </Condition> </Parameters> <Parameters Type="Override"> <Switch Param="SWITCH_TYPE"> <Case Value="AIRBUS"> <TYPE>ON_OFF</TYPE> <IS_AIRLINER>True</IS_AIRLINER> <Condition Check="BATTERY_BUS_ID"> <True> <SEQ1_EMISSIVE_CODE>0</SEQ1_EMISSIVE_CODE> <SEQ2_EMISSIVE_CODE>#BATTERY_BUS_ID# (A:1:BUS CONNECTION ON:#HOT_BATTERY_BUS_ID#, Bool) !</SEQ2_EMISSIVE_CODE> </True> <False> <SEQ1_EMISSIVE_CODE>0</SEQ1_EMISSIVE_CODE> <SEQ2_EMISSIVE_CODE>(A:ELECTRICAL MASTER BATTERY:#ID#, Bool) !</SEQ2_EMISSIVE_CODE> </False> </Condition> </Case> <Case Value="BOEING"> <TYPE>ON_OFF</TYPE> <IS_AIRLINER>True</IS_AIRLINER> <Condition Check="BATTERY_BUS_ID"> <True> <SEQ1_EMISSIVE_CODE>#BATTERY_BUS_ID# (A:1:BUS CONNECTION ON:#HOT_BATTERY_BUS_ID#, Bool)</SEQ1_EMISSIVE_CODE> <SEQ2_EMISSIVE_CODE>#BATTERY_BUS_ID# (A:1:BUS CONNECTION ON:#HOT_BATTERY_BUS_ID#, Bool) !</SEQ2_EMISSIVE_CODE> </True> <False> <SEQ1_EMISSIVE_CODE>(A:ELECTRICAL MASTER BATTERY:#ID#, Bool)</SEQ1_EMISSIVE_CODE> <SEQ2_EMISSIVE_CODE>(A:ELECTRICAL MASTER BATTERY:#ID#, Bool) !</SEQ2_EMISSIVE_CODE> </False> </Condition> </Case> <Case Value="AS02A"> <TYPE>ON_OFF</TYPE> <IS_AIRLINER>True</IS_AIRLINER> </Case> <Case Value="ON_OFF_EMERGENCY"> <TYPE>ON_OFF_EMERGENCY</TYPE> <IS_AIRLINER>False</IS_AIRLINER> </Case> <Case Value="GPU_BATT_OFF"> <TYPE>GPU_BATT_OFF</TYPE> <IS_AIRLINER>False</IS_AIRLINER> </Case> <Default> <TYPE>ON_OFF</TYPE> <IS_AIRLINER>False</IS_AIRLINER> </Default> </Switch> </Parameters> <Parameters Type="Default"> <Switch Param="TYPE"> <Case Value="ON_OFF"> <STATE_ON>1</STATE_ON> <STATE_OFF>0</STATE_OFF> </Case> <Case Value="ON_OFF_EMERGENCY"> <STATE_ON>0</STATE_ON> <STATE_OFF>1</STATE_OFF> <STATE_EMERGENCY>2</STATE_EMERGENCY> </Case> <Case Value="GPU_BATT_OFF"> <STATE_GPU>0</STATE_GPU> <STATE_BATT>1</STATE_BATT> <STATE_OFF>2</STATE_OFF> </Case> </Switch> </Parameters> <Parameters Type="Default"> <TOOLTIP_BATTERY_TITLE>@TT_Package.ELECTRICAL_BATTERY_TITLE</TOOLTIP_BATTERY_TITLE> </Parameters> <Parameters Type="Override"> <TOOLTIP_TITLE>#TOOLTIP_BATTERY_TITLE#</TOOLTIP_TITLE> <TOOLTIP_ENTRY_0>ELECTRICAL_Battery_#ID#</TOOLTIP_ENTRY_0> </Parameters> <UseInputEvent ID="ELECTRICAL"> <BATTERY_ID>#ID#</BATTERY_ID> <ON_STATE_CHANGED_EXTERNAL_CODE>#ON_TOGGLE_MASTER_BATTERY#</ON_STATE_CHANGED_EXTERNAL_CODE> </UseInputEvent> <Condition Valid="IS_AIRLINER"> <True> <Condition Check="BATTERY_BUS_ID"> <True> <UseTemplate Name="ASOBO_GT_Helper_Recursive_Param_Builder"> <EXIT_TEMPLATE>ASOBO_GT_Update</EXIT_TEMPLATE> <PARAM_NAME>UPDATE_CODE</PARAM_NAME> <PARAM_START> (* Prevent Battery from being shut down, instead disconnect it from bus *) </PARAM_START> <PARAM_REPEATED_START>(A:ELECTRICAL MASTER BATTERY:</PARAM_REPEATED_START> <PARAM_REPEATED_END>, Bool) ! if{ </PARAM_REPEATED_END> <PARAM_REPEATED_2_START> #BATTERY_BUS_ID# (A:1:BUS CONNECTION ON:#HOT_BATTERY_BUS_ID#, Bool) if{ #BATTERY_BUS_ID# #HOT_BATTERY_BUS_ID# (>K:2:ELECTRICAL_BUS_TO_BUS_CONNECTION_TOGGLE) } </PARAM_REPEATED_2_START> <PARAM_REPEATED_2_END> (>K:TOGGLE_MASTER_BATTERY) } </PARAM_REPEATED_2_END> <FREQUENCY>1</FREQUENCY> </UseTemplate> </True> </Condition> <Switch Param="SWITCH_TYPE"> <Case Value="AS02A"> <Component ID="#NODE_ID_LOCK#" Node="#NODE_ID_LOCK#"> <UseTemplate Name="ASOBO_GT_Switch_Code"> <ANIM_NAME>#ANIM_NAME_LOCK#</ANIM_NAME> <ANIM_CODE>(L:XMLVAR_BatteryStatus_Unlocked) 100 *</ANIM_CODE> <LEFT_SINGLE_CODE>(L:XMLVAR_BatteryStatus_Unlocked) ! (>L:XMLVAR_BatteryStatus_Unlocked)</LEFT_SINGLE_CODE> <WWISE_EVENT_1>lock_battery_switch_on</WWISE_EVENT_1> <WWISE_EVENT_2>lock_battery_switch_off</WWISE_EVENT_2> <ANIMREF_ID>0</ANIMREF_ID> <ANIMTIP_0_ON_PERCENT>0</ANIMTIP_0_ON_PERCENT> <ANIMTIP_1_ON_PERCENT>1</ANIMTIP_1_ON_PERCENT> <ANIMTIP_0>TT:COCKPIT.TOOLTIPS.BATTERY_SWITCH_GUARD_ON</ANIMTIP_0> <ANIMTIP_1>TT:COCKPIT.TOOLTIPS.BATTERY_SWITCH_GUARD_OFF</ANIMTIP_1> </UseTemplate> </Component> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <UseTemplate Name="ASOBO_GT_Switch_3States"> <SWITCH_POSITION_TYPE>L</SWITCH_POSITION_TYPE> <SWITCH_POSITION_VAR>XMLVAR_BatteryStatus</SWITCH_POSITION_VAR> <CODE_POS_0_VERIF>(L:XMLVAR_BatteryStatus_Unlocked) 1 ==</CODE_POS_0_VERIF> <STATE1_TEST>(L:XMLVAR_BatteryStatus) 0 == (L:XMLVAR_BatteryStatus_Unlocked) 0 == and</STATE1_TEST> <WWISE_EVENT>battery_switch</WWISE_EVENT> </UseTemplate> </Component> </Case> <Default> <UseTemplate Name="ASOBO_GT_Push_Button_Airliner"> <LEFT_SINGLE_CODE>(>B:ELECTRICAL_Battery_#ID#_Toggle)</LEFT_SINGLE_CODE> <NORMALIZED_TIME_1>0.1</NORMALIZED_TIME_1> <NORMALIZED_TIME_2>0.5</NORMALIZED_TIME_2> </UseTemplate> </Default> </Switch> </True> <False> <Switch Param="SWITCH_TYPE"> <Case Value="ON_OFF_EMERGENCY"> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <UseTemplate Name="ASOBO_GT_Switch_3States"> <CODE_POS_#STATE_ON#>(>B:ELECTRICAL_Battery_#ID#_On)</CODE_POS_#STATE_ON#> <CODE_POS_#STATE_OFF#>(>B:ELECTRICAL_Battery_#ID#_Off)</CODE_POS_#STATE_OFF#> <CODE_POS_#STATE_EMERGENCY#>(>B:ELECTRICAL_Battery_#ID#_Emergency)</CODE_POS_#STATE_EMERGENCY#> <STATE#STATE_ON#_TEST>(B:ELECTRICAL_Battery_#ID#, Number) #STATE_ON# ==</STATE#STATE_ON#_TEST> <STATE#STATE_OFF#_TEST>(B:ELECTRICAL_Battery_#ID#, Number) #STATE_OFF# ==</STATE#STATE_OFF#_TEST> <STATE#STATE_EMERGENCY#_TEST>(B:ELECTRICAL_Battery_#ID#, Number) #STATE_EMERGENCY# ==</STATE#STATE_EMERGENCY#_TEST> <WWISE_EVENT>battery_switch</WWISE_EVENT> </UseTemplate> </Component> </Case> <Case Value="GPU_BATT_OFF"> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <UseTemplate Name="ASOBO_GT_Switch_3States"> <CODE_POS_#STATE_GPU#>(>B:ELECTRICAL_Battery_#ID#_GPU)</CODE_POS_#STATE_GPU#> <CODE_POS_#STATE_BATT#>(>B:ELECTRICAL_Battery_#ID#_Battery)</CODE_POS_#STATE_BATT#> <CODE_POS_#STATE_OFF#>(>B:ELECTRICAL_Battery_#ID#_Off)</CODE_POS_#STATE_OFF#> <STATE#STATE_GPU#_TEST>(B:ELECTRICAL_Battery_#ID#, Number) #STATE_GPU# ==</STATE#STATE_GPU#_TEST> <STATE#STATE_BATT#_TEST>(B:ELECTRICAL_Battery_#ID#, Number) #STATE_BATT# ==</STATE#STATE_BATT#_TEST> <STATE#STATE_OFF#_TEST>(B:ELECTRICAL_Battery_#ID#, Number) #STATE_OFF# ==</STATE#STATE_OFF#_TEST> <WWISE_EVENT>battery_switch</WWISE_EVENT> </UseTemplate> </Component> </Case> <Case Value="LOCKED"> <UseTemplate Name="ASOBO_GT_Switch_Covered"> <SWITCH_NODE_ID>#NODE_ID#</SWITCH_NODE_ID> <SWITCH_ANIM_NAME>#ANIM_NAME#</SWITCH_ANIM_NAME> <COVER_NODE_ID>#LOCK_NODE_ID#</COVER_NODE_ID> <COVER_ANIM_NAME>#LOCK_ANIM_NAME#</COVER_ANIM_NAME> <COVER_VAR_NAME>XMLVAR_ELECTRICAL_Battery_Cover_Opened</COVER_VAR_NAME> <COVER_VAR_TYPE>I</COVER_VAR_TYPE> <TOGGLE_STATE>(>B:ELECTRICAL_Battery_#ID#_Toggle)</TOGGLE_STATE> <SWITCH_ANIM_CODE>(B:ELECTRICAL_Battery_#ID#, Bool) 100 *</SWITCH_ANIM_CODE> </UseTemplate> </Case> <Default> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <UseTemplate Name="ASOBO_GT_Switch_Code"> <ANIM_CODE>(B:ELECTRICAL_Battery_#ID#, Number) #STATE_ON# == 100 *</ANIM_CODE> <LEFT_SINGLE_CODE>(>B:ELECTRICAL_Battery_#ID#_Toggle)</LEFT_SINGLE_CODE> <NORMALIZED_TIME_1>0.1</NORMALIZED_TIME_1> <NORMALIZED_TIME_2>0.5</NORMALIZED_TIME_2> </UseTemplate> </Component> </Default> </Switch> </False> </Condition> </Template>Parameters initialization:
-
Default
Parameters set:
- ANIM_NAME (using INTERACTION_TYPE, ID)
- NODE_ID (using INTERACTION_TYPE, ID)
- PART_ID (using INTERACTION_TYPE)
Condition: Valid(IS_AIRLINER)
-
Case: True
Parameters set:
- ANIM_NAME_LOCK (using INTERACTION_TYPE, ID)
- NODE_ID_LOCK (using INTERACTION_TYPE, ID)
- FAULT_NODE_ID (using INTERACTION_TYPE, ID)
- OFF_NODE_ID (using INTERACTION_TYPE, ID)
- ON_NODE_ID (using INTERACTION_TYPE, ID)
Condition: Switch(INTERACTION_TYPE)
-
Case: Switch
Condition: Check(TYPE)
-
Case: True
Parameters set:
- SWITCH_TYPE (using TYPE)
-
-
Default
Condition: Switch(INTERACTION_TYPE)
-
Case: Switch
Parameters set:
- WWISE_EVENT_1
- WWISE_EVENT_2
Condition: Switch(SWITCH_TYPE)
-
Case: ON_OFF_EMERGENCY
Parameters set:
- MAIN_BUS_ID
- ESSENTIAL_BUS_ID
- BATTERY_BUS_ID
-
Case: LOCKED
Parameters set:
- LOCK_NODE_ID (using NODE_ID)
- LOCK_ANIM_NAME (using ANIM_NAME)
- COVER_IE_NAME (using ID)
- COVER_IE_ID_SOURCE
Condition: Check(SET_AVIONIC_CIRCUIT)
-
Case: True
Parameters set:
- ON_TOGGLE_MASTER_BATTERY
-
Case: False
Parameters set:
- ON_TOGGLE_MASTER_BATTERY
-
-
Override
Condition: Switch(SWITCH_TYPE)
-
Case: AIRBUS
Parameters set:
- TYPE
- IS_AIRLINER
Condition: Check(BATTERY_BUS_ID)
-
Case: True
Parameters set:
- SEQ1_EMISSIVE_CODE
- SEQ2_EMISSIVE_CODE (using BATTERY_BUS_ID, HOT_BATTERY_BUS_ID)
-
Case: False
Parameters set:
- SEQ1_EMISSIVE_CODE
- SEQ2_EMISSIVE_CODE (using ID)
-
Case: BOEING
Parameters set:
- TYPE
- IS_AIRLINER
Condition: Check(BATTERY_BUS_ID)
-
Case: True
Parameters set:
- SEQ1_EMISSIVE_CODE (using BATTERY_BUS_ID, HOT_BATTERY_BUS_ID)
- SEQ2_EMISSIVE_CODE (using BATTERY_BUS_ID, HOT_BATTERY_BUS_ID)
-
Case: False
Parameters set:
- SEQ1_EMISSIVE_CODE (using ID)
- SEQ2_EMISSIVE_CODE (using ID)
-
Case: AS02A
Parameters set:
- TYPE
- IS_AIRLINER
-
Case: ON_OFF_EMERGENCY
Parameters set:
- TYPE
- IS_AIRLINER
-
Case: GPU_BATT_OFF
Parameters set:
- TYPE
- IS_AIRLINER
-
Default case:
Parameters set:
- TYPE
- IS_AIRLINER
-
-
Default
Condition: Switch(TYPE)
-
Case: ON_OFF
Parameters set:
- STATE_ON
- STATE_OFF
-
Case: ON_OFF_EMERGENCY
Parameters set:
- STATE_ON
- STATE_OFF
- STATE_EMERGENCY
-
Case: GPU_BATT_OFF
Parameters set:
- STATE_GPU
- STATE_BATT
- STATE_OFF
-
-
Default
Parameters set:
- TOOLTIP_BATTERY_TITLE
-
Override
Parameters set:
- TOOLTIP_TITLE (using TOOLTIP_BATTERY_TITLE)
- TOOLTIP_ENTRY_0 (using ID)
Parameters set:
- BATTERY_ID (using ID)
- ON_STATE_CHANGED_EXTERNAL_CODE (using ON_TOGGLE_MASTER_BATTERY)
Condition: Valid(IS_AIRLINER)
-
Case: True
Condition: Check(BATTERY_BUS_ID)
-
Case: True
Templates used:
-
ASOBO_GT_Helper_Recursive_Param_Builder
Parameters set:
- EXIT_TEMPLATE
- PARAM_NAME
- PARAM_START
- PARAM_REPEATED_START
- PARAM_REPEATED_END
- PARAM_REPEATED_2_START (using BATTERY_BUS_ID, HOT_BATTERY_BUS_ID)
- PARAM_REPEATED_2_END
- FREQUENCY
-
ASOBO_GT_Helper_Recursive_Param_Builder
Condition: Switch(SWITCH_TYPE)
-
Case: AS02A
Parameters read:
- NODE_ID_LOCK
- NODE_ID
Components:
-
#NODE_ID_LOCK# (Node: #NODE_ID_LOCK#)
Templates used:
-
ASOBO_GT_Switch_Code
Parameters set:
- ANIM_NAME (using ANIM_NAME_LOCK)
- ANIM_CODE
- LEFT_SINGLE_CODE
- WWISE_EVENT_1
- WWISE_EVENT_2
- ANIMREF_ID
- ANIMTIP_0_ON_PERCENT
- ANIMTIP_1_ON_PERCENT
- ANIMTIP_0
- ANIMTIP_1
-
ASOBO_GT_Switch_Code
-
#NODE_ID# (Node: #NODE_ID#)
Templates used:
-
ASOBO_GT_Switch_3States
Parameters set:
- SWITCH_POSITION_TYPE
- SWITCH_POSITION_VAR
- CODE_POS_0_VERIF
- STATE1_TEST
- WWISE_EVENT
-
ASOBO_GT_Switch_3States
-
Default case:
Templates used:
-
ASOBO_GT_Push_Button_Airliner
Parameters set:
- LEFT_SINGLE_CODE (using ID)
- NORMALIZED_TIME_1
- NORMALIZED_TIME_2
-
ASOBO_GT_Push_Button_Airliner
-
-
Case: False
Condition: Switch(SWITCH_TYPE)
-
Case: ON_OFF_EMERGENCY
Parameters read:
- NODE_ID
Components:
-
#NODE_ID# (Node: #NODE_ID#)
Templates used:
-
ASOBO_GT_Switch_3States
Parameters set:
- CODE_POS_#STATE_ON# (using ID)
- CODE_POS_#STATE_OFF# (using ID)
- CODE_POS_#STATE_EMERGENCY# (using ID)
- STATE#STATE_ON#_TEST (using ID, STATE_ON)
- STATE#STATE_OFF#_TEST (using ID, STATE_OFF)
- STATE#STATE_EMERGENCY#_TEST (using ID, STATE_EMERGENCY)
- WWISE_EVENT
-
ASOBO_GT_Switch_3States
-
Case: GPU_BATT_OFF
Parameters read:
- NODE_ID
Components:
-
#NODE_ID# (Node: #NODE_ID#)
Templates used:
-
ASOBO_GT_Switch_3States
Parameters set:
- CODE_POS_#STATE_GPU# (using ID)
- CODE_POS_#STATE_BATT# (using ID)
- CODE_POS_#STATE_OFF# (using ID)
- STATE#STATE_GPU#_TEST (using ID, STATE_GPU)
- STATE#STATE_BATT#_TEST (using ID, STATE_BATT)
- STATE#STATE_OFF#_TEST (using ID, STATE_OFF)
- WWISE_EVENT
-
ASOBO_GT_Switch_3States
-
Case: LOCKED
Templates used:
-
ASOBO_GT_Switch_Covered
Parameters set:
- SWITCH_NODE_ID (using NODE_ID)
- SWITCH_ANIM_NAME (using ANIM_NAME)
- COVER_NODE_ID (using LOCK_NODE_ID)
- COVER_ANIM_NAME (using LOCK_ANIM_NAME)
- COVER_VAR_NAME
- COVER_VAR_TYPE
- TOGGLE_STATE (using ID)
- SWITCH_ANIM_CODE (using ID)
-
ASOBO_GT_Switch_Covered
-
Default case:
Parameters read:
- NODE_ID
Components:
-
#NODE_ID# (Node: #NODE_ID#)
Templates used:
-
ASOBO_GT_Switch_Code
Parameters set:
- ANIM_CODE (using ID, STATE_ON)
- LEFT_SINGLE_CODE (using ID)
- NORMALIZED_TIME_1
- NORMALIZED_TIME_2
-
ASOBO_GT_Switch_Code
-
-
Default
-
ASOBO_ELECTRICAL_Avionics_Master_SubTemplate
Definition from XML<Template Name="ASOBO_ELECTRICAL_Avionics_Master_SubTemplate"> <Parameters Type="Default"> <ANIM_NAME>ELECTRICAL_#INTERACTION_TYPE#_Avionics_Master</ANIM_NAME> <NODE_ID>ELECTRICAL_#INTERACTION_TYPE#_Avionics_Master</NODE_ID> <PART_ID>ELECTRICAL_#INTERACTION_TYPE#_Avionics_Master</PART_ID> <WWISE_EVENT_1>avionic_switch_on</WWISE_EVENT_1> <WWISE_EVENT_2>avionic_switch_off</WWISE_EVENT_2> <TOOLTIP_AVIONICS_TITLE>@TT_Package.ELECTRICAL_SWITCH_AVIONICS_MASTER_TITLE</TOOLTIP_AVIONICS_TITLE> <TT_DESCRIPTION_ID>@TT_Package.ELECTRICAL_SWITCH_AVIONICS_MASTER_ACTION_SET</TT_DESCRIPTION_ID> </Parameters> <Parameters Type="Override"> <BTN_ID>Avionics_Master</BTN_ID> </Parameters> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <UseInputEvent ID="ELECTRICAL"> <SET_STATE_ON>1 (>K:AVIONICS_MASTER_SET)</SET_STATE_ON> <SET_STATE_OFF>0 (>K:AVIONICS_MASTER_SET)</SET_STATE_OFF> <GET_STATE_EXTERNAL>(A:AVIONICS MASTER SWITCH, Bool) sp0</GET_STATE_EXTERNAL> <SIM_STATE_IS_ON_EXTERNAL>l0</SIM_STATE_IS_ON_EXTERNAL> <SIMVAR_TO_WATCH_0>AVIONICS MASTER SWITCH</SIMVAR_TO_WATCH_0> </UseInputEvent> <UseTemplate Name="ASOBO_GT_Switch_Code"> <TOOLTIP_TITLE>#TOOLTIP_AVIONICS_TITLE#</TOOLTIP_TITLE> <TOOLTIP_ENTRY_0>ELECTRICAL_#BTN_ID#</TOOLTIP_ENTRY_0> <LEFT_SINGLE_CODE>(>B:ELECTRICAL_#BTN_ID#_Toggle)</LEFT_SINGLE_CODE> <ANIM_CODE>(B:ELECTRICAL_#BTN_ID#, Bool) 100 *</ANIM_CODE> </UseTemplate> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- ANIM_NAME (using INTERACTION_TYPE)
- NODE_ID (using INTERACTION_TYPE)
- PART_ID (using INTERACTION_TYPE)
- WWISE_EVENT_1
- WWISE_EVENT_2
- TOOLTIP_AVIONICS_TITLE
- TT_DESCRIPTION_ID
-
Override
Parameters set:
- BTN_ID
Parameters read:
- NODE_ID
Components:
-
#NODE_ID# (Node: #NODE_ID#)
Parameters set:
- SET_STATE_ON
- SET_STATE_OFF
- GET_STATE_EXTERNAL
- SIM_STATE_IS_ON_EXTERNAL
- SIMVAR_TO_WATCH_0
Templates used:
-
ASOBO_GT_Switch_Code
Parameters set:
- TOOLTIP_TITLE (using TOOLTIP_AVIONICS_TITLE)
- TOOLTIP_ENTRY_0 (using BTN_ID)
- LEFT_SINGLE_CODE (using BTN_ID)
- ANIM_CODE (using BTN_ID)
-
Default
-
ASOBO_ELECTRICAL_Engine_Bleed_SubTemplate
Definition from XML<Template Name="ASOBO_ELECTRICAL_Engine_Bleed_SubTemplate"> <Parameters Type="Default"> <ANIM_NAME>ELECTRICAL_#INTERACTION_TYPE#_Engine_Bleed_#ID#</ANIM_NAME> <NODE_ID>ELECTRICAL_#INTERACTION_TYPE#_Engine_Bleed_#ID#</NODE_ID> <PART_ID>ELECTRICAL_#INTERACTION_TYPE#_Engine_Bleed</PART_ID> <WWISE_EVENT_1>engine_bleed_switch_on</WWISE_EVENT_1> <WWISE_EVENT_2>engine_bleed_switch_off</WWISE_EVENT_2> <NORMALIZED_TIME_1>0.1</NORMALIZED_TIME_1> <NORMALIZED_TIME_2>0.5</NORMALIZED_TIME_2> <IE_ENG_BLEED_ID>#ID#</IE_ENG_BLEED_ID> <TOOLTIP_ENGINE_BLEED_TITLE>@TT_Package.ENGINE_BLEED_TITLE</TOOLTIP_ENGINE_BLEED_TITLE> <TT_DESCRIPTION_ID>@TT_Package.ENGINE_BLEED_ACTION</TT_DESCRIPTION_ID> <TT_DESCRIPTION_INDEX>#ID#</TT_DESCRIPTION_INDEX> <TT_DESCRIPTION_IS_DYNAMIC>True</TT_DESCRIPTION_IS_DYNAMIC> </Parameters> <Parameters Type="Override"> <BTN_ID>Engine_Bleed_#IE_ENG_BLEED_ID#</BTN_ID> <Switch Param="AIRLINER_TYPE"> <Case Value="AIRBUS"> <SEQ1_EMISSIVE_CODE>0</SEQ1_EMISSIVE_CODE> <SEQ2_EMISSIVE_CODE>(A:BLEED AIR ENGINE:#ID#, Bool) !</SEQ2_EMISSIVE_CODE> </Case> <Case Value="BOEING"> <SEQ1_EMISSIVE_CODE>(A:BLEED AIR ENGINE:#ID#, Bool)</SEQ1_EMISSIVE_CODE> <SEQ2_EMISSIVE_CODE>(A:BLEED AIR ENGINE:#ID#, Bool) !</SEQ2_EMISSIVE_CODE> </Case> </Switch> </Parameters> <Parameters Type="Override"> <SET_STATE_ON>1 #ID# (>K:2:ENGINE_BLEED_AIR_SOURCE_SET)</SET_STATE_ON> <SET_STATE_OFF>0 #ID# (>K:2:ENGINE_BLEED_AIR_SOURCE_SET)</SET_STATE_OFF> <GET_STATE_EXTERNAL>(A:BLEED AIR ENGINE:#ID#, Bool) sp0</GET_STATE_EXTERNAL> <SIM_STATE_IS_ON_EXTERNAL>l0</SIM_STATE_IS_ON_EXTERNAL> <SIMVAR_TO_WATCH_0>BLEED AIR ENGINE:#ID#</SIMVAR_TO_WATCH_0> <LEFT_SINGLE_CODE>(>B:ELECTRICAL_#BTN_ID#_Toggle)</LEFT_SINGLE_CODE> <TOOLTIP_TITLE>#TOOLTIP_ENGINE_BLEED_TITLE#</TOOLTIP_TITLE> <TOOLTIP_ENTRY_0>ELECTRICAL_#BTN_ID#</TOOLTIP_ENTRY_0> </Parameters> <Switch Param="INTERACTION_TYPE"> <Case Value="Push"> <Condition NotEmpty="AIRLINER_TYPE"> <True> <UseTemplate Name="ASOBO_GT_Push_Button_Airliner"> <INPUT_EVENT_ID>ELECTRICAL</INPUT_EVENT_ID> </UseTemplate> </True> <False> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <UseInputEvent ID="ELECTRICAL"/> <UseTemplate Name="ASOBO_GT_Push_Button"/> </Component> </False> </Condition> </Case> <Case Value="Switch"> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <UseInputEvent ID="ELECTRICAL"> <ANIM>EXTERNAL</ANIM> <TT_ICON>MOVE_Y</TT_ICON> </UseInputEvent> <UseTemplate Name="ASOBO_GT_Switch_Code"> <ANIM_CODE>(B:ELECTRICAL_#BTN_ID#, Bool) 100 *</ANIM_CODE> </UseTemplate> </Component> </Case> </Switch> </Template>Parameters initialization:
-
Default
Parameters set:
- ANIM_NAME (using INTERACTION_TYPE, ID)
- NODE_ID (using INTERACTION_TYPE, ID)
- PART_ID (using INTERACTION_TYPE)
- WWISE_EVENT_1
- WWISE_EVENT_2
- NORMALIZED_TIME_1
- NORMALIZED_TIME_2
- IE_ENG_BLEED_ID (using ID)
- TOOLTIP_ENGINE_BLEED_TITLE
- TT_DESCRIPTION_ID
- TT_DESCRIPTION_INDEX (using ID)
- TT_DESCRIPTION_IS_DYNAMIC
-
Override
Parameters set:
- BTN_ID (using IE_ENG_BLEED_ID)
Condition: Switch(AIRLINER_TYPE)
-
Case: AIRBUS
Parameters set:
- SEQ1_EMISSIVE_CODE
- SEQ2_EMISSIVE_CODE (using ID)
-
Case: BOEING
Parameters set:
- SEQ1_EMISSIVE_CODE (using ID)
- SEQ2_EMISSIVE_CODE (using ID)
-
Override
Parameters set:
- SET_STATE_ON (using ID)
- SET_STATE_OFF (using ID)
- GET_STATE_EXTERNAL (using ID)
- SIM_STATE_IS_ON_EXTERNAL
- SIMVAR_TO_WATCH_0 (using ID)
- LEFT_SINGLE_CODE (using BTN_ID)
- TOOLTIP_TITLE (using TOOLTIP_ENGINE_BLEED_TITLE)
- TOOLTIP_ENTRY_0 (using BTN_ID)
Condition: Switch(INTERACTION_TYPE)
-
Case: Push
Condition: NotEmpty(AIRLINER_TYPE)
-
Case: True
Templates used:
-
ASOBO_GT_Push_Button_Airliner
Parameters set:
- INPUT_EVENT_ID
-
ASOBO_GT_Push_Button_Airliner
-
Case: False
Parameters read:
- NODE_ID
Components:
-
#NODE_ID# (Node: #NODE_ID#)
Templates used:
-
-
Case: Switch
Parameters read:
- NODE_ID
Components:
-
#NODE_ID# (Node: #NODE_ID#)
Parameters set:
- ANIM
- TT_ICON
Templates used:
-
ASOBO_GT_Switch_Code
Parameters set:
- ANIM_CODE (using BTN_ID)
-
Default
-
ASOBO_ELECTRICAL_Switch_APU_Bleed_SubTemplate
Definition from XML<Template Name="ASOBO_ELECTRICAL_Switch_APU_Bleed_SubTemplate"> <Parameters Type="Default"> <ANIM_NAME>ELECTRICAL_Switch_APU_Bleed</ANIM_NAME> <NODE_ID>ELECTRICAL_Switch_APU_Bleed</NODE_ID> <PART_ID>ELECTRICAL_Switch_APU_Bleed</PART_ID> <FAULT_NODE_ID>ELECTRICAL_Switch_APU_Bleed_Fault</FAULT_NODE_ID> <ON_NODE_ID>ELECTRICAL_Switch_APU_Bleed_On</ON_NODE_ID> <WWISE_EVENT_1>apu_bleed_switch_on</WWISE_EVENT_1> <WWISE_EVENT_2>apu_bleed_switch_off</WWISE_EVENT_2> <NORMALIZED_TIME_1>0.1</NORMALIZED_TIME_1> <NORMALIZED_TIME_2>0.5</NORMALIZED_TIME_2> <TOOLTIP_APU_BLEED_TITLE>@TT_Package.CABIN_PRESSURIZATION_SWITCH_BLEED_APU_TITLE</TOOLTIP_APU_BLEED_TITLE> </Parameters> <Parameters Type="Override"> <TOOLTIP_TITLE>#TOOLTIP_APU_BLEED_TITLE#</TOOLTIP_TITLE> <TOOLTIP_ENTRY_0>ELECTRICAL_APU_Bleed</TOOLTIP_ENTRY_0> <LEFT_SINGLE_CODE>(>B:ELECTRICAL_APU_Bleed_Toggle)</LEFT_SINGLE_CODE> <Switch Param="TYPE"> <Case Value="AIRBUS"> <SEQ1_EMISSIVE_CODE>0</SEQ1_EMISSIVE_CODE> <SEQ2_EMISSIVE_CODE>(B:ELECTRICAL_APU_Bleed)</SEQ2_EMISSIVE_CODE> </Case> <Default> <SEQ1_EMISSIVE_CODE>(B:ELECTRICAL_APU_Bleed)</SEQ1_EMISSIVE_CODE> <SEQ2_EMISSIVE_CODE>0</SEQ2_EMISSIVE_CODE> </Default> </Switch> </Parameters> <UseTemplate Name="ASOBO_GT_Push_Button_Airliner"> <INPUT_EVENT_ID>ELECTRICAL</INPUT_EVENT_ID> <APU_BLEED_ID>1</APU_BLEED_ID> </UseTemplate> </Template>Parameters initialization:
-
Default
Parameters set:
- ANIM_NAME
- NODE_ID
- PART_ID
- FAULT_NODE_ID
- ON_NODE_ID
- WWISE_EVENT_1
- WWISE_EVENT_2
- NORMALIZED_TIME_1
- NORMALIZED_TIME_2
- TOOLTIP_APU_BLEED_TITLE
-
Override
Parameters set:
- TOOLTIP_TITLE (using TOOLTIP_APU_BLEED_TITLE)
- TOOLTIP_ENTRY_0
- LEFT_SINGLE_CODE
Condition: Switch(TYPE)
-
Case: AIRBUS
Parameters set:
- SEQ1_EMISSIVE_CODE
- SEQ2_EMISSIVE_CODE
-
Default case:
Parameters set:
- SEQ1_EMISSIVE_CODE
- SEQ2_EMISSIVE_CODE
Templates used:
-
ASOBO_GT_Push_Button_Airliner
Parameters set:
- INPUT_EVENT_ID
- APU_BLEED_ID
-
Default
-
ASOBO_ELECTRICAL_APU_Starter_SubTemplate
Definition from XML<Template Name="ASOBO_ELECTRICAL_APU_Starter_SubTemplate"> <Parameters Type="Default"> <ANIM_NAME>ELECTRICAL_#INTERACTION_TYPE#_APU_Starter</ANIM_NAME> <NODE_ID>ELECTRICAL_#INTERACTION_TYPE#_APU_Starter</NODE_ID> <PART_ID>ELECTRICAL_Switch_APU_Starter</PART_ID> <EXTRA_CONDITION>1</EXTRA_CONDITION> <AVAIL_PERCENTAGE>95</AVAIL_PERCENTAGE> <WWISE_EVENT>starter_apu_switch</WWISE_EVENT> <WWISE_EVENT_1>starter_apu_switch_on</WWISE_EVENT_1> <WWISE_EVENT_2>starter_apu_switch_off</WWISE_EVENT_2> <NORMALIZED_TIME_1>0.1</NORMALIZED_TIME_1> <NORMALIZED_TIME_2>0.5</NORMALIZED_TIME_2> <ID>1</ID> <TOOLTIP_APU_STARTER_TITLE>@TT_Package.ELECTRICAL_SWITCH_APU_STARTER_TITLE</TOOLTIP_APU_STARTER_TITLE> </Parameters> <Parameters Type="Override"> <TOOLTIP_TITLE>#TOOLTIP_APU_STARTER_TITLE#</TOOLTIP_TITLE> <TOOLTIP_ENTRY_0>ELECTRICAL_APU_Starter</TOOLTIP_ENTRY_0> <Switch Param="INTERACTION_TYPE"> <Case Value="SWITCH"> <Switch Param="NUM_STATES"> <Case Value="2"> <ANIM_CODE>(B:ELECTRICAL_APU_Starter) 100 *</ANIM_CODE> <LEFT_SINGLE_CODE>(>B:ELECTRICAL_APU_Starter_Toggle)</LEFT_SINGLE_CODE> <Condition Valid="MATCH_GEN_TO_STARTER"> <ON_STATE_CHANGED_EXTERNAL_CODE> #ID# (B:ELECTRICAL_APU_Starter) ! (>K:2:APU_GENERATOR_SWITCH_SET) </ON_STATE_CHANGED_EXTERNAL_CODE> </Condition> </Case> <Case Value="3"> <SWITCH_DIRECTION>Horizontal</SWITCH_DIRECTION> <ARROW_TYPE>Curved</ARROW_TYPE> <MOMENTARY_SWITCH/> <STATE_MAX_TIMER>0.5</STATE_MAX_TIMER> <STATE0_TIMER>0</STATE0_TIMER> <CODE_POS_0>(>K:APU_OFF_SWITCH)</CODE_POS_0> <CODE_POS_1/> <CODE_POS_2>(>K:APU_STARTER)</CODE_POS_2> <STATE0_TEST>0</STATE0_TEST> <STATE1_TEST>(A:APU SWITCH, Bool) (#SWITCH_POSITION_TYPE#:#SWITCH_POSITION_VAR#) 2 != and</STATE1_TEST> <STATE2_TEST>0</STATE2_TEST> </Case> </Switch> </Case> <Case Value="PUSH"> <SEQ1_EMISSIVE_CODE>(A:APU PCT RPM, Percent) #AVAIL_PERCENTAGE# >=</SEQ1_EMISSIVE_CODE> <SEQ2_EMISSIVE_CODE>(A:APU PCT RPM, Percent) 0 > (A:APU PCT RPM, Percent) #AVAIL_PERCENTAGE# < and (A:APU SWITCH, Bool) and</SEQ2_EMISSIVE_CODE> <Condition Valid="OVERRIDE_LEFT_SINGLE_CODE"> <False> <LEFT_SINGLE_CODE>(>B:ELECTRICAL_APU_Starter_Toggle)</LEFT_SINGLE_CODE> </False> <True> <LEFT_SINGLE_CODE>#OVERRIDE_LEFT_SINGLE_CODE#</LEFT_SINGLE_CODE> </True> </Condition> </Case> </Switch> </Parameters> <Switch Param="INTERACTION_TYPE"> <Case Value="SWITCH"> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <UseInputEvent ID="ELECTRICAL"> <APU_STARTER_ID>1</APU_STARTER_ID> </UseInputEvent> <Switch Param="NUM_STATES"> <Case Value="2"> <UseTemplate Name="ASOBO_GT_Switch_Code"/> </Case> <Case Value="3"> <UseTemplate Name="ASOBO_GT_Switch_3States"/> </Case> </Switch> </Component> </Case> <Case Value="PUSH"> <UseTemplate Name="ASOBO_GT_Push_Button_Airliner"> <INPUT_EVENT_ID>ELECTRICAL</INPUT_EVENT_ID> <APU_STARTER_ID>1</APU_STARTER_ID> </UseTemplate> </Case> </Switch> <Condition Valid="ACTIVE_FUEL_PUMP_ON_RPM"> <True> <UseTemplate Name="ASOBO_GT_Update"> <FREQUENCY>1</FREQUENCY> <UPDATE_CODE> (A:APU SWITCH, Bool) #ACTIVE_FUEL_PUMP_ON_RPM# (>K:2:FUELSYSTEM_PUMP_SET) </UPDATE_CODE> </UseTemplate> </True> </Condition> </Template>Parameters initialization:
-
Default
Parameters set:
- ANIM_NAME (using INTERACTION_TYPE)
- NODE_ID (using INTERACTION_TYPE)
- PART_ID
- EXTRA_CONDITION
- AVAIL_PERCENTAGE
- WWISE_EVENT
- WWISE_EVENT_1
- WWISE_EVENT_2
- NORMALIZED_TIME_1
- NORMALIZED_TIME_2
- ID
- TOOLTIP_APU_STARTER_TITLE
-
Override
Parameters set:
- TOOLTIP_TITLE (using TOOLTIP_APU_STARTER_TITLE)
- TOOLTIP_ENTRY_0
Condition: Switch(INTERACTION_TYPE)
-
Case: SWITCH
Condition: Switch(NUM_STATES)
-
Case: 2
Parameters set:
- ANIM_CODE
- LEFT_SINGLE_CODE
Condition: Valid(MATCH_GEN_TO_STARTER)
-
Case: True
Parameters set:
- ON_STATE_CHANGED_EXTERNAL_CODE (using ID)
-
Case: 3
Parameters set:
- SWITCH_DIRECTION
- ARROW_TYPE
- MOMENTARY_SWITCH
- STATE_MAX_TIMER
- STATE0_TIMER
- CODE_POS_0
- CODE_POS_1
- CODE_POS_2
- STATE0_TEST
- STATE1_TEST (using SWITCH_POSITION_TYPE, SWITCH_POSITION_VAR)
- STATE2_TEST
-
-
Case: PUSH
Parameters set:
- SEQ1_EMISSIVE_CODE (using AVAIL_PERCENTAGE)
- SEQ2_EMISSIVE_CODE (using AVAIL_PERCENTAGE)
Condition: Valid(OVERRIDE_LEFT_SINGLE_CODE)
-
Case: False
Parameters set:
- LEFT_SINGLE_CODE
-
Case: True
Parameters set:
- LEFT_SINGLE_CODE (using OVERRIDE_LEFT_SINGLE_CODE)
Condition: Switch(INTERACTION_TYPE)
-
Case: SWITCH
Parameters read:
- NODE_ID
Components:
-
#NODE_ID# (Node: #NODE_ID#)
Parameters set:
- APU_STARTER_ID
Condition: Switch(NUM_STATES)
-
Case: 2
Templates used:
-
Case: 3
Templates used:
-
Case: PUSH
Templates used:
-
ASOBO_GT_Push_Button_Airliner
Parameters set:
- INPUT_EVENT_ID
- APU_STARTER_ID
-
ASOBO_GT_Push_Button_Airliner
Condition: Valid(ACTIVE_FUEL_PUMP_ON_RPM)
-
Case: True
Templates used:
-
ASOBO_GT_Update
Parameters set:
- FREQUENCY
- UPDATE_CODE (using ACTIVE_FUEL_PUMP_ON_RPM)
-
ASOBO_GT_Update
-
Default
-
ASOBO_ELECTRICAL_APU_Generator_SubTemplate
Definition from XML<Template Name="ASOBO_ELECTRICAL_APU_Generator_SubTemplate"> <Parameters Type="Default"> <ANIM_NAME>ELECTRICAL_#INTERACTION_TYPE#_APU_Generator</ANIM_NAME> <NODE_ID>ELECTRICAL_#INTERACTION_TYPE#_APU_Generator</NODE_ID> <PART_ID>ELECTRICAL_Switch_APU_Generator</PART_ID> <FAULT_NODE_ID>ELECTRICAL_Switch_APU_Generator_Fault</FAULT_NODE_ID> <OFF_NODE_ID>ELECTRICAL_Switch_APU_Generator_Off</OFF_NODE_ID> <WWISE_EVENT>apu_generator_switch</WWISE_EVENT> <WWISE_EVENT_1>apu_generator_switch_on</WWISE_EVENT_1> <WWISE_EVENT_2>apu_generator_switch_off</WWISE_EVENT_2> <NORMALIZED_TIME_1>0.1</NORMALIZED_TIME_1> <NORMALIZED_TIME_2>0.5</NORMALIZED_TIME_2> <POST_CLICK_CODE/> <TOOLTIP_APU_GEN_TITLE>@TT_Package.ELECTRICAL_SWITCH_APU_GENERATOR_TITLE</TOOLTIP_APU_GEN_TITLE> <GEN_ID>#ID#</GEN_ID> </Parameters> <Parameters Type="Override"> <TOOLTIP_TITLE>#TOOLTIP_APU_GEN_TITLE#</TOOLTIP_TITLE> <TOOLTIP_ENTRY_0>ELECTRICAL_APU_Generator_#ID#</TOOLTIP_ENTRY_0> <Switch Param="TYPE"> <Case Value="AIRBUS"> <SEQ1_EMISSIVE_CODE>0</SEQ1_EMISSIVE_CODE> <SEQ2_EMISSIVE_CODE>(A:APU GENERATOR SWITCH:#ID#, Bool) !</SEQ2_EMISSIVE_CODE> </Case> <Case Value="BOEING"> <SEQ1_EMISSIVE_CODE>(A:APU GENERATOR SWITCH:#ID#, Bool) ! (A:APU PCT RPM, Percent) 95 > and</SEQ1_EMISSIVE_CODE> <SEQ2_EMISSIVE_CODE>(A:APU GENERATOR SWITCH:#ID#, Bool) (A:APU PCT RPM, Percent) 95 > and</SEQ2_EMISSIVE_CODE> <POST_CLICK_CODE>#POST_CLICK_CODE# (A:APU GENERATOR SWITCH:#ID#, Bool) if{ 0 #ID# (>K:2:SET_EXTERNAL_POWER) } </POST_CLICK_CODE> </Case> <Case Value="AS01B"> <SEQ1_EMISSIVE_CODE>(A:APU GENERATOR SWITCH:#ID#, Bool)</SEQ1_EMISSIVE_CODE> <SEQ2_EMISSIVE_CODE>(A:APU GENERATOR SWITCH:#ID#, Bool) !</SEQ2_EMISSIVE_CODE> </Case> </Switch> <Switch Param="INTERACTION_TYPE"> <Case Value="SWITCH"> <MOMENTARY_SWITCH/> <STATE_MAX_TIMER>0.5</STATE_MAX_TIMER> <STATE0_TIMER>0</STATE0_TIMER> <NONUNIQUE_DEFAULT>0</NONUNIQUE_DEFAULT> <SINGLE_ID>1</SINGLE_ID> <REST_STATE>1</REST_STATE> <NUM_STATES>3</NUM_STATES> <CODE_POS_0> (A:APU GENERATOR SWITCH:#ID#, Bool) ! if{ #ID# (>K:APU_GENERATOR_SWITCH_TOGGLE) } 0 (>O:XMLVAR_APU_Reset) </CODE_POS_0> <CODE_POS_1> (A:APU GENERATOR SWITCH:#ID#, Bool) if{ #ID# (>K:APU_GENERATOR_SWITCH_TOGGLE) } 0 (>O:XMLVAR_APU_Reset) </CODE_POS_1> <CODE_POS_2> (A:APU GENERATOR SWITCH:#ID#, Bool) if{ #ID# (>K:APU_GENERATOR_SWITCH_TOGGLE) } 1 (>O:XMLVAR_APU_Reset) </CODE_POS_2> <STATE0_TEST>(A:APU GENERATOR SWITCH:#ID#, bool)</STATE0_TEST> <STATE1_TEST>(A:APU GENERATOR SWITCH:#ID#, bool) ! (O:XMLVAR_APU_Reset) ! and</STATE1_TEST> <STATE2_TEST>(A:APU GENERATOR SWITCH:#ID#, bool) ! (O:XMLVAR_APU_Reset) and</STATE2_TEST> </Case> <Case Value="PUSH"> <LEFT_SINGLE_CODE>#ID# (>B:ELECTRICAL_APU_Generator_#ID#_Toggle) #POST_CLICK_CODE#</LEFT_SINGLE_CODE> </Case> </Switch> </Parameters> <Switch Param="INTERACTION_TYPE"> <Case Value="SWITCH"> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <UseInputEvent ID="ELECTRICAL"> <APU_GEN_ID>#GEN_ID#</APU_GEN_ID> </UseInputEvent> <UseTemplate Name="ASOBO_GT_Switch_3States"/> </Component> </Case> <Case Value="PUSH"> <UseTemplate Name="ASOBO_GT_Push_Button_Airliner"> <INPUT_EVENT_ID>ELECTRICAL</INPUT_EVENT_ID> <APU_GEN_ID>#GEN_ID#</APU_GEN_ID> </UseTemplate> </Case> </Switch> </Template>Parameters initialization:
-
Default
Parameters set:
- ANIM_NAME (using INTERACTION_TYPE)
- NODE_ID (using INTERACTION_TYPE)
- PART_ID
- FAULT_NODE_ID
- OFF_NODE_ID
- WWISE_EVENT
- WWISE_EVENT_1
- WWISE_EVENT_2
- NORMALIZED_TIME_1
- NORMALIZED_TIME_2
- POST_CLICK_CODE
- TOOLTIP_APU_GEN_TITLE
- GEN_ID (using ID)
-
Override
Parameters set:
- TOOLTIP_TITLE (using TOOLTIP_APU_GEN_TITLE)
- TOOLTIP_ENTRY_0 (using ID)
Condition: Switch(TYPE)
-
Case: AIRBUS
Parameters set:
- SEQ1_EMISSIVE_CODE
- SEQ2_EMISSIVE_CODE (using ID)
-
Case: BOEING
Parameters set:
- SEQ1_EMISSIVE_CODE (using ID)
- SEQ2_EMISSIVE_CODE (using ID)
- POST_CLICK_CODE (using POST_CLICK_CODE, ID)
-
Case: AS01B
Parameters set:
- SEQ1_EMISSIVE_CODE (using ID)
- SEQ2_EMISSIVE_CODE (using ID)
Condition: Switch(INTERACTION_TYPE)
-
Case: SWITCH
Parameters set:
- MOMENTARY_SWITCH
- STATE_MAX_TIMER
- STATE0_TIMER
- NONUNIQUE_DEFAULT
- SINGLE_ID
- REST_STATE
- NUM_STATES
- CODE_POS_0 (using ID)
- CODE_POS_1 (using ID)
- CODE_POS_2 (using ID)
- STATE0_TEST (using ID)
- STATE1_TEST (using ID)
- STATE2_TEST (using ID)
-
Case: PUSH
Parameters set:
- LEFT_SINGLE_CODE (using ID, POST_CLICK_CODE)
Condition: Switch(INTERACTION_TYPE)
-
Case: SWITCH
Parameters read:
- NODE_ID
Components:
- #NODE_ID# (Node: #NODE_ID#)
-
Case: PUSH
Templates used:
-
ASOBO_GT_Push_Button_Airliner
Parameters set:
- INPUT_EVENT_ID
- APU_GEN_ID (using GEN_ID)
-
ASOBO_GT_Push_Button_Airliner
-
Default
-
ASOBO_ELECTRICAL_Alternator_SubTemplate
Definition from XML<Template Name="ASOBO_ELECTRICAL_Alternator_SubTemplate"> <Parameters Type="Default"> <ANIM_NAME>ELECTRICAL_Switch_Alternator_#ID#</ANIM_NAME> <NODE_ID>ELECTRICAL_Switch_Alternator_#ID#</NODE_ID> <PART_ID>ELECTRICAL_Switch_Alternator</PART_ID> <ENGINE_ID>#ID#</ENGINE_ID> <Switch Param="TYPE"> <Case Value="RESET_ON_TRIP"> <POS_RESET>0</POS_RESET> <POS_ON>1</POS_ON> <POS_TRIP>2</POS_TRIP> </Case> <Case Value="ON_OFF_RESET"> <POS_ON>0</POS_ON> <POS_OFF>1</POS_OFF> <POS_RESET>2</POS_RESET> </Case> <Case Value="STBY_MAIN_OFF"> <POS_STBY>0</POS_STBY> <POS_MAIN>1</POS_MAIN> <POS_OFF>2</POS_OFF> </Case> </Switch> <TOOLTIP_TITLE>@TT_Package.ELECTRICAL_ALTERNATOR_TITLE</TOOLTIP_TITLE> <TT_DESCRIPTION_ID>@TT_Package.ELECTRICAL_ALTERNATOR_ACTION_SET_SOLO</TT_DESCRIPTION_ID> </Parameters> <Parameters Type="Override"> <TOOLTIP_ENTRY_0>ELECTRICAL_Alternator_#ID#</TOOLTIP_ENTRY_0> <Switch Param="INTERACTION_TYPE"> <Case Value="PUSH"> <NUM_STATES>2</NUM_STATES> <Switch Param="TYPE"> <Case Value="AIRBUS"> <SEQ1_EMISSIVE_CODE>(A:GENERAL ENG MASTER ALTERNATOR:#ID#, bool) (A:GENERAL ENG PCT MAX RPM:#ENGINE_ID#, Percent) 1 < and</SEQ1_EMISSIVE_CODE> <SEQ2_EMISSIVE_CODE>(A:GENERAL ENG MASTER ALTERNATOR:#ID#, Bool) !</SEQ2_EMISSIVE_CODE> </Case> <Case Value="BOEING"> <SEQ1_EMISSIVE_CODE>(A:GENERAL ENG MASTER ALTERNATOR:#ID#, bool)</SEQ1_EMISSIVE_CODE> <SEQ2_EMISSIVE_CODE>(A:GENERAL ENG MASTER ALTERNATOR:#ID#, Bool) ! (A:GENERAL ENG COMBUSTION:#ENGINE_ID#, Bool) ! or</SEQ2_EMISSIVE_CODE> </Case> <Case Value="AS02A"> <SEQ1_EMISSIVE_CODE>(A:GENERAL ENG MASTER ALTERNATOR:#ID#, bool) (A:GENERAL ENG PCT MAX RPM:#ENGINE_ID#, Percent) 1 < and</SEQ1_EMISSIVE_CODE> <SEQ2_EMISSIVE_CODE>(A:GENERAL ENG MASTER ALTERNATOR:#ID#, Bool) !</SEQ2_EMISSIVE_CODE> </Case> </Switch> </Case> <Case Value="SWITCH"> <TT_ICON>MOVE_Y</TT_ICON> <Switch Param="TYPE"> <Case Value="RESET_ON_TRIP"> <NUM_STATES>3</NUM_STATES> <MOMENTARY_SWITCH/> <STATE_MAX_TIMER>0.5</STATE_MAX_TIMER> <STATE0_TIMER>0.5</STATE0_TIMER> <ALTERNATOR_UPDATE_CODE>(O:XMLVAR_Alternator_Reset_Trip) 0 == (A:GENERAL ENG MASTER ALTERNATOR:#ID#, bool) ! and if{ (>K:TOGGLE_ALTERNATOR#ID#) }</ALTERNATOR_UPDATE_CODE> <SET_STATE_#POS_RESET#>(A:GENERAL ENG MASTER ALTERNATOR:#ID#, bool) ! if{ (>K:TOGGLE_ALTERNATOR#ID#) } 1 (>O:XMLVAR_Alternator_Reset_Trip)</SET_STATE_#POS_RESET#> <SET_STATE_#POS_ON#>(A:GENERAL ENG MASTER ALTERNATOR:#ID#, bool) ! if{ (>K:TOGGLE_ALTERNATOR#ID#) } 0 (>O:XMLVAR_Alternator_Reset_Trip)</SET_STATE_#POS_ON#> <SET_STATE_#POS_TRIP#>(A:GENERAL ENG MASTER ALTERNATOR:#ID#, bool) if{ (>K:TOGGLE_ALTERNATOR#ID#) } 2 (>O:XMLVAR_Alternator_Reset_Trip)</SET_STATE_#POS_TRIP#> <TT_VALUE_#POS_RESET#>@TT_Package.GT_STATE_RESET</TT_VALUE_#POS_RESET#> <TT_VALUE_#POS_ON#>@TT_Package.GT_STATE_ON</TT_VALUE_#POS_ON#> <TT_VALUE_#POS_TRIP#>@TT_Package.GT_STATE_TRIP</TT_VALUE_#POS_TRIP#> <GET_STATE_EXTERNAL>(A:GENERAL ENG MASTER ALTERNATOR:#ID#, bool) sp0 (O:XMLVAR_Alternator_Reset_Trip) sp1</GET_STATE_EXTERNAL> <ENUM_VAL_TO_POS_EXTERNAL>#POS_ON# sp2 l0 if{ #POS_ON# sp2 g2 } els{ #POS_RESET# #POS_TRIP# (O:XMLVAR_Alternator_Reset_Trip) 1 == ? sp2 g2 } :2 l2</ENUM_VAL_TO_POS_EXTERNAL> </Case> <Case Value="ON_OFF_RESET"> <NUM_STATES>3</NUM_STATES> <MOMENTARY_SWITCH/> <STATE_MAX_TIMER>0.5</STATE_MAX_TIMER> <STATE0_TIMER>0</STATE0_TIMER> <SET_STATE_#POS_ON#>(A:GENERAL ENG MASTER ALTERNATOR:#ID#, bool) ! if{ (>K:TOGGLE_ALTERNATOR#ID#) } 0 (>O:XMLVAR_Alternator_#ID#_Reset)</SET_STATE_#POS_ON#> <SET_STATE_#POS_OFF#>(A:GENERAL ENG MASTER ALTERNATOR:#ID#, bool) if{ (>K:TOGGLE_ALTERNATOR#ID#) } 0 (>O:XMLVAR_Alternator_#ID#_Reset)</SET_STATE_#POS_OFF#> <SET_STATE_#POS_RESET#>(A:GENERAL ENG MASTER ALTERNATOR:#ID#, bool) if{ (>K:TOGGLE_ALTERNATOR#ID#) } 1 (>O:XMLVAR_Alternator_#ID#_Reset)</SET_STATE_#POS_RESET#> <TT_VALUE_#POS_ON#>@TT_Package.GT_STATE_ON</TT_VALUE_#POS_ON#> <TT_VALUE_#POS_OFF#>@TT_Package.GT_STATE_OFF</TT_VALUE_#POS_OFF#> <TT_VALUE_#POS_RESET#>@TT_Package.GT_STATE_RESET</TT_VALUE_#POS_RESET#> <GET_STATE_EXTERNAL>(A:GENERAL ENG MASTER ALTERNATOR:#ID#, bool) sp0 (O:XMLVAR_Alternator_#ID#_Reset) sp1</GET_STATE_EXTERNAL> <ENUM_VAL_TO_POS_EXTERNAL>#POS_OFF# sp2 l0 if{ #POS_ON# sp2 g2 } els{ #POS_RESET# #POS_OFF# l1 ? sp2 g2 } :2 l2</ENUM_VAL_TO_POS_EXTERNAL> </Case> <Case Value="STBY_MAIN_OFF"> <NUM_STATES>3</NUM_STATES> <SET_STATE_#POS_STBY#>(A:GENERAL ENG MASTER ALTERNATOR:#ID#, bool) ! if{ (>K:TOGGLE_ALTERNATOR#ID#) } 1 (>O:XMLVAR_ELECTRICAL_Generator_Standby_ON)</SET_STATE_#POS_STBY#> <SET_STATE_#POS_MAIN#>(A:GENERAL ENG MASTER ALTERNATOR:#ID#, bool) ! if{ (>K:TOGGLE_ALTERNATOR#ID#) } 0 (>O:XMLVAR_ELECTRICAL_Generator_Standby_ON)</SET_STATE_#POS_MAIN#> <SET_STATE_#POS_OFF#>(A:GENERAL ENG MASTER ALTERNATOR:#ID#, bool) if{ (>K:TOGGLE_ALTERNATOR#ID#) } 0 (>O:XMLVAR_ELECTRICAL_Generator_Standby_ON)</SET_STATE_#POS_OFF#> <TT_VALUE_#POS_STBY#>@TT_Package.GT_STATE_STANDBY</TT_VALUE_#POS_STBY#> <TT_VALUE_#POS_MAIN#>@TT_Package.GT_STATE_MAIN</TT_VALUE_#POS_MAIN#> <TT_VALUE_#POS_OFF#>@TT_Package.GT_STATE_OFF</TT_VALUE_#POS_OFF#> <GET_STATE_EXTERNAL>(A:GENERAL ENG MASTER ALTERNATOR:#ID#, bool) sp0 (O:XMLVAR_ELECTRICAL_Generator_Standby_ON) sp1</GET_STATE_EXTERNAL> <ENUM_VAL_TO_POS_EXTERNAL>#POS_OFF# sp2 l0 if{ #POS_STBY# #POS_MAIN# l1 ? sp2 g2 } els{ #POS_OFF# sp2 g2 } :2 l2</ENUM_VAL_TO_POS_EXTERNAL> </Case> <Default> <NUM_STATES>2</NUM_STATES> </Default> </Switch> </Case> </Switch> </Parameters> <Parameters Type="Default"> <Switch Param="NUM_STATES"> <Case Value="2"> <WWISE_EVENT_1>alternator_switch_on</WWISE_EVENT_1> <WWISE_EVENT_2>alternator_switch_off</WWISE_EVENT_2> </Case> <Case Value="3"> <WWISE_EVENT>alternator_switch</WWISE_EVENT> </Case> </Switch> </Parameters> <Parameters Type="Override"> <BTN_ID>Alternator_#ID#</BTN_ID> <SIMVAR_TO_WATCH_0>GENERAL ENG MASTER ALTERNATOR:#ID#</SIMVAR_TO_WATCH_0> <Switch Param="NUM_STATES"> <Case Value="3"> <Switch Param="TYPE"> <Case Value="RESET_ON_TRIP"> <POS_0>#POS_RESET#</POS_0> <ID_POS_0>Reset</ID_POS_0> <POS_1>#POS_ON#</POS_1> <ID_POS_1>On</ID_POS_1> <POS_2>#POS_TRIP#</POS_2> <ID_POS_2>Trip</ID_POS_2> </Case> <Case Value="ON_OFF_RESET"> <POS_0>#POS_ON#</POS_0> <ID_POS_0>On</ID_POS_0> <POS_1>#POS_OFF#</POS_1> <ID_POS_1>Off</ID_POS_1> <POS_2>#POS_RESET#</POS_2> <ID_POS_2>Reset</ID_POS_2> </Case> <Case Value="STBY_MAIN_OFF"> <POS_0>#POS_STBY#</POS_0> <ID_POS_0>Standby</ID_POS_0> <POS_1>#POS_MAIN#</POS_1> <ID_POS_1>Main</ID_POS_1> <POS_2>#POS_OFF#</POS_2> <ID_POS_2>Off</ID_POS_2> </Case> </Switch> </Case> <Case Value="2"> <SET_STATE_EXTERNAL>p0 (A:GENERAL ENG MASTER ALTERNATOR:#ID#, Bool) != if{ #ID# p0 (>K:2:ALTERNATOR_SET) }</SET_STATE_EXTERNAL> <GET_STATE_EXTERNAL>(A:GENERAL ENG MASTER ALTERNATOR:#ID#, Bool) sp0</GET_STATE_EXTERNAL> <SIM_STATE_IS_ON_EXTERNAL>l0</SIM_STATE_IS_ON_EXTERNAL> </Case> </Switch> </Parameters> <Switch Param="INTERACTION_TYPE"> <Case Value="PUSH"> <UseTemplate Name="ASOBO_GT_Push_Button_Airliner"> <INPUT_EVENT_ID>ELECTRICAL</INPUT_EVENT_ID> <LEFT_SINGLE_CODE>(>B:ELECTRICAL_#BTN_ID#_Toggle)</LEFT_SINGLE_CODE> </UseTemplate> </Case> <Case Value="SWITCH"> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <Condition NotEmpty="ALTERNATOR_UPDATE_CODE"> <UseTemplate Name="ASOBO_GT_Update"> <UPDATE_CODE>#ALTERNATOR_UPDATE_CODE#</UPDATE_CODE> </UseTemplate> </Condition> <UseInputEvent ID="ELECTRICAL"> <ANIM>EXTERNAL</ANIM> <Switch Param="NUM_STATES"> <Case Value="3"> <STR_STATE_#POS_0#>#ID_POS_0#</STR_STATE_#POS_0#> <STR_STATE_#POS_1#>#ID_POS_1#</STR_STATE_#POS_1#> <STR_STATE_#POS_2#>#ID_POS_2#</STR_STATE_#POS_2#> </Case> </Switch> </UseInputEvent> <Switch Param="NUM_STATES"> <Case Value="2"> <UseTemplate Name="ASOBO_GT_Switch_Code"> <LEFT_SINGLE_CODE>(>B:ELECTRICAL_#BTN_ID#_Toggle)</LEFT_SINGLE_CODE> <ANIM_CODE>(B:ELECTRICAL_#BTN_ID#, Bool) 100 *</ANIM_CODE> </UseTemplate> </Case> <Case Value="3"> <UseTemplate Name="ASOBO_GT_Switch_XStates"> <CODE_POS_#POS_0#>(>B:ELECTRICAL_#BTN_ID#_#ID_POS_0#)</CODE_POS_#POS_0#> <CODE_POS_#POS_1#>(>B:ELECTRICAL_#BTN_ID#_#ID_POS_1#)</CODE_POS_#POS_1#> <CODE_POS_#POS_2#>(>B:ELECTRICAL_#BTN_ID#_#ID_POS_2#)</CODE_POS_#POS_2#> <STATE#POS_0#_TEST>(B:ELECTRICAL_#BTN_ID#) #POS_0# ==</STATE#POS_0#_TEST> <STATE#POS_1#_TEST>(B:ELECTRICAL_#BTN_ID#) #POS_1# ==</STATE#POS_1#_TEST> <STATE#POS_2#_TEST>(B:ELECTRICAL_#BTN_ID#) #POS_2# ==</STATE#POS_2#_TEST> </UseTemplate> </Case> </Switch> </Component> </Case> </Switch> </Template>Parameters initialization:
-
Default
Parameters set:
- ANIM_NAME (using ID)
- NODE_ID (using ID)
- PART_ID
- ENGINE_ID (using ID)
- TOOLTIP_TITLE
- TT_DESCRIPTION_ID
Condition: Switch(TYPE)
-
Case: RESET_ON_TRIP
Parameters set:
- POS_RESET
- POS_ON
- POS_TRIP
-
Case: ON_OFF_RESET
Parameters set:
- POS_ON
- POS_OFF
- POS_RESET
-
Case: STBY_MAIN_OFF
Parameters set:
- POS_STBY
- POS_MAIN
- POS_OFF
-
Override
Parameters set:
- TOOLTIP_ENTRY_0 (using ID)
Condition: Switch(INTERACTION_TYPE)
-
Case: PUSH
Parameters set:
- NUM_STATES
Condition: Switch(TYPE)
-
Case: AIRBUS
Parameters set:
- SEQ1_EMISSIVE_CODE (using ID, ENGINE_ID)
- SEQ2_EMISSIVE_CODE (using ID)
-
Case: BOEING
Parameters set:
- SEQ1_EMISSIVE_CODE (using ID)
- SEQ2_EMISSIVE_CODE (using ID, ENGINE_ID)
-
Case: AS02A
Parameters set:
- SEQ1_EMISSIVE_CODE (using ID, ENGINE_ID)
- SEQ2_EMISSIVE_CODE (using ID)
-
Case: SWITCH
Parameters set:
- TT_ICON
Condition: Switch(TYPE)
-
Case: RESET_ON_TRIP
Parameters set:
- NUM_STATES
- MOMENTARY_SWITCH
- STATE_MAX_TIMER
- STATE0_TIMER
- ALTERNATOR_UPDATE_CODE (using ID)
- SET_STATE_#POS_RESET# (using ID)
- SET_STATE_#POS_ON# (using ID)
- SET_STATE_#POS_TRIP# (using ID)
- TT_VALUE_#POS_RESET#
- TT_VALUE_#POS_ON#
- TT_VALUE_#POS_TRIP#
- GET_STATE_EXTERNAL (using ID)
- ENUM_VAL_TO_POS_EXTERNAL (using POS_ON, POS_RESET, POS_TRIP)
-
Case: ON_OFF_RESET
Parameters set:
- NUM_STATES
- MOMENTARY_SWITCH
- STATE_MAX_TIMER
- STATE0_TIMER
- SET_STATE_#POS_ON# (using ID)
- SET_STATE_#POS_OFF# (using ID)
- SET_STATE_#POS_RESET# (using ID)
- TT_VALUE_#POS_ON#
- TT_VALUE_#POS_OFF#
- TT_VALUE_#POS_RESET#
- GET_STATE_EXTERNAL (using ID)
- ENUM_VAL_TO_POS_EXTERNAL (using POS_OFF, POS_ON, POS_RESET)
-
Case: STBY_MAIN_OFF
Parameters set:
- NUM_STATES
- SET_STATE_#POS_STBY# (using ID)
- SET_STATE_#POS_MAIN# (using ID)
- SET_STATE_#POS_OFF# (using ID)
- TT_VALUE_#POS_STBY#
- TT_VALUE_#POS_MAIN#
- TT_VALUE_#POS_OFF#
- GET_STATE_EXTERNAL (using ID)
- ENUM_VAL_TO_POS_EXTERNAL (using POS_OFF, POS_STBY, POS_MAIN)
-
Default case:
Parameters set:
- NUM_STATES
-
Default
Condition: Switch(NUM_STATES)
-
Case: 2
Parameters set:
- WWISE_EVENT_1
- WWISE_EVENT_2
-
Case: 3
Parameters set:
- WWISE_EVENT
-
-
Override
Parameters set:
- BTN_ID (using ID)
- SIMVAR_TO_WATCH_0 (using ID)
Condition: Switch(NUM_STATES)
-
Case: 3
Condition: Switch(TYPE)
-
Case: RESET_ON_TRIP
Parameters set:
- POS_0 (using POS_RESET)
- ID_POS_0
- POS_1 (using POS_ON)
- ID_POS_1
- POS_2 (using POS_TRIP)
- ID_POS_2
-
Case: ON_OFF_RESET
Parameters set:
- POS_0 (using POS_ON)
- ID_POS_0
- POS_1 (using POS_OFF)
- ID_POS_1
- POS_2 (using POS_RESET)
- ID_POS_2
-
Case: STBY_MAIN_OFF
Parameters set:
- POS_0 (using POS_STBY)
- ID_POS_0
- POS_1 (using POS_MAIN)
- ID_POS_1
- POS_2 (using POS_OFF)
- ID_POS_2
-
-
Case: 2
Parameters set:
- SET_STATE_EXTERNAL (using ID)
- GET_STATE_EXTERNAL (using ID)
- SIM_STATE_IS_ON_EXTERNAL
Condition: Switch(INTERACTION_TYPE)
-
Case: PUSH
Templates used:
-
ASOBO_GT_Push_Button_Airliner
Parameters set:
- INPUT_EVENT_ID
- LEFT_SINGLE_CODE (using BTN_ID)
-
ASOBO_GT_Push_Button_Airliner
-
Case: SWITCH
Parameters read:
- NODE_ID
Components:
-
#NODE_ID# (Node: #NODE_ID#)
Parameters set:
- ANIM
Condition: NotEmpty(ALTERNATOR_UPDATE_CODE)
-
Case: True
Templates used:
-
ASOBO_GT_Update
Parameters set:
- UPDATE_CODE (using ALTERNATOR_UPDATE_CODE)
-
ASOBO_GT_Update
Condition: Switch(NUM_STATES)
-
Case: 3
Parameters set:
- STR_STATE_#POS_0# (using ID_POS_0)
- STR_STATE_#POS_1# (using ID_POS_1)
- STR_STATE_#POS_2# (using ID_POS_2)
Condition: Switch(NUM_STATES)
-
Case: 2
Templates used:
-
ASOBO_GT_Switch_Code
Parameters set:
- LEFT_SINGLE_CODE (using BTN_ID)
- ANIM_CODE (using BTN_ID)
-
ASOBO_GT_Switch_Code
-
Case: 3
Templates used:
-
ASOBO_GT_Switch_XStates
Parameters set:
- CODE_POS_#POS_0# (using BTN_ID, ID_POS_0)
- CODE_POS_#POS_1# (using BTN_ID, ID_POS_1)
- CODE_POS_#POS_2# (using BTN_ID, ID_POS_2)
- STATE#POS_0#_TEST (using BTN_ID, POS_0)
- STATE#POS_1#_TEST (using BTN_ID, POS_1)
- STATE#POS_2#_TEST (using BTN_ID, POS_2)
-
ASOBO_GT_Switch_XStates
-
Default
-
ASOBO_ELECTRICAL_ExternalPower_Template
Definition from XML<Template Name="ASOBO_ELECTRICAL_ExternalPower_Template"> <Parameters Type="Default"> <Switch Param="INTERACTION_TYPE"> <Case Value="SWITCH"> <Switch Param="NUM_STATES"> <Case Value="2"> <TYPE>SWITCH_2States</TYPE> </Case> <Case Value="3"> <TYPE>SWITCH_3States</TYPE> </Case> </Switch> </Case> </Switch> </Parameters> <Parameters Type="Default"> <PART_ID>ELECTRICAL_Switch_ExternalPower</PART_ID> <ANIM_NAME>ELECTRICAL_Switch_ExternalPower_#ID#</ANIM_NAME> <NODE_ID>ELECTRICAL_Switch_ExternalPower_#ID#</NODE_ID> <Switch Param="INTERACTION_TYPE"> <Case Value="PUSH"> <Switch Param="TYPE"> <Case Value="AIRBUS"/> <Case Value="BOEING"> <SWAP_SEQ_CONDITION>False</SWAP_SEQ_CONDITION> </Case> </Switch> </Case> <Case Value="SWITCH"> <Switch Param="TYPE"> <Case Value="SWITCH_3States"> <COVER_NODE_ID>ELECTRICAL_Switch_ExternalPower_#ID#_Cover</COVER_NODE_ID> <COVER_ANIM_NAME>ELECTRICAL_Switch_ExternalPower_#ID#_Cover</COVER_ANIM_NAME> <GET_STATE_EXTERNAL> 12 (A:1:BUS CONNECTION ON:1, Bool) sp1 12 (A:1:CIRCUIT CONNECTION ON:11, Bool) sp2 1 (A:1:CIRCUIT CONNECTION ON:11, Bool) sp3 </GET_STATE_EXTERNAL> <SET_EXTPWR_MAIN_BUS_CONNECTION>l1 != if{ 1 12 (>K:2:ELECTRICAL_BUS_TO_BUS_CONNECTION_TOGGLE) }</SET_EXTPWR_MAIN_BUS_CONNECTION> <SET_EXTPWR_STARTER_CONNECTION>l2 != if{ 11 12 (>K:2:ELECTRICAL_BUS_TO_CIRCUIT_CONNECTION_TOGGLE) }</SET_EXTPWR_STARTER_CONNECTION> <SET_STARTER_MAIN_BUS_CONNECTION>l3 != if{ 11 1 (>K:2:ELECTRICAL_BUS_TO_CIRCUIT_CONNECTION_TOGGLE) }</SET_STARTER_MAIN_BUS_CONNECTION> </Case> </Switch> </Case> </Switch> <POST_CLICK_CODE/> <EXTPWR_ID>#ID#</EXTPWR_ID> <TOOLTIP_EXTPWR_TITLE>@TT_Package.ELECTRICAL_SWITCH_EXTERNAL_POWER_TITLE</TOOLTIP_EXTPWR_TITLE> </Parameters> <Parameters Type="Override"> <Condition Check="TYPE" Match="AS04F"> <False> <TOOLTIP_ENTRY_0>ELECTRICAL_ExternalPower_#ID#</TOOLTIP_ENTRY_0> </False> </Condition> <TOOLTIP_TITLE>#TOOLTIP_EXTPWR_TITLE#</TOOLTIP_TITLE> <Switch Param="INTERACTION_TYPE"> <Case Value="PUSH"> <LEFT_SINGLE_CODE>(>B:ELECTRICAL_ExternalPower_#EXTPWR_ID#_Toggle)</LEFT_SINGLE_CODE> <WWISE_EVENT_1>externalpower_push_button_on</WWISE_EVENT_1> <WWISE_EVENT_2>externalpower_push_button_off</WWISE_EVENT_2> <NORMALIZED_TIME_1>0.1</NORMALIZED_TIME_1> <NORMALIZED_TIME_2>0.5</NORMALIZED_TIME_2> <Switch Param="TYPE"> <Case Value="AIRBUS"> <SEQ1_EMISSIVE_CODE>(A:EXTERNAL POWER AVAILABLE:#ID#, Bool) (A:EXTERNAL POWER ON:#ID#, Bool) ! and</SEQ1_EMISSIVE_CODE> <SEQ2_EMISSIVE_CODE>(A:EXTERNAL POWER AVAILABLE:#ID#, Bool) (A:EXTERNAL POWER ON:#ID#, Bool) and</SEQ2_EMISSIVE_CODE> </Case> <Case Value="BOEING"> <ON_STATE_CHANGED> #POST_CLICK_CODE# (A:EXTERNAL POWER AVAILABLE:#ID#, Bool) (A:EXTERNAL POWER ON:#ID#, Bool) and if{ (A:EXTERNAL POWER ON:#ID#, Bool) if{ #ID# 0 (>K:2:APU_GENERATOR_SWITCH_SET) } } </ON_STATE_CHANGED> <DOWN_STATE_CODE>(B:ELECTRICAL_ExternalPower_#EXTPWR_ID#)</DOWN_STATE_CODE> <Switch Param="VARIANT"> <Case Value="747"> <SEQ1_EMISSIVE_CODE>(A:EXTERNAL POWER AVAILABLE:#ID#, Bool) (B:ELECTRICAL_ExternalPower_#EXTPWR_ID#) ! and</SEQ1_EMISSIVE_CODE> <SEQ2_EMISSIVE_CODE>(A:EXTERNAL POWER AVAILABLE:#ID#, Bool) (B:ELECTRICAL_ExternalPower_#EXTPWR_ID#) and</SEQ2_EMISSIVE_CODE> </Case> <Default> <SEQ1_EMISSIVE_CODE>(A:EXTERNAL POWER AVAILABLE:#ID#, Bool) (B:ELECTRICAL_ExternalPower_#EXTPWR_ID#) and</SEQ1_EMISSIVE_CODE> <SEQ2_EMISSIVE_CODE>(A:EXTERNAL POWER AVAILABLE:#ID#, Bool) (B:ELECTRICAL_ExternalPower_#EXTPWR_ID#) ! and</SEQ2_EMISSIVE_CODE> </Default> </Switch> </Case> </Switch> </Case> <Case Value="SWITCH"> <Switch Param="TYPE"> <Case Value="SWITCH_2States"> <LEFT_SINGLE_CODE>(>B:ELECTRICAL_ExternalPower_#EXTPWR_ID#_Toggle)</LEFT_SINGLE_CODE> <ANIM_CODE>(B:ELECTRICAL_ExternalPower_#EXTPWR_ID#) 100 *</ANIM_CODE> <WWISE_EVENT_1>externalpower_switch_on</WWISE_EVENT_1> <WWISE_EVENT_2>externalpower_switch_off</WWISE_EVENT_2> </Case> <Case Value="SWITCH_3States"> <SWITCH_NODE_ID>#NODE_ID#</SWITCH_NODE_ID> <SWITCH_ANIM_NAME>#ANIM_NAME#</SWITCH_ANIM_NAME> <COVER_VAR_NAME>XMLVAR_ELECTRICAL_ExternalPower_#EXTPWR_ID#_Cover_Opened</COVER_VAR_NAME> <WWISE_EVENT>externalpower_switch</WWISE_EVENT> <BTN_ID>ExternalPower_#EXTPWR_ID#</BTN_ID> <EXTPWR_ID/> </Case> </Switch> </Case> </Switch> </Parameters> <Switch Param="INTERACTION_TYPE"> <Case Value="PUSH"> <UseTemplate Name="ASOBO_GT_Push_Button_Airliner"> <INPUT_EVENT_ID>ELECTRICAL</INPUT_EVENT_ID> <Condition Valid="SWAP_SEQ_CONDITION"> <SEQ1_EMISSIVE_CODE>#SEQ2_EMISSIVE_CODE#</SEQ1_EMISSIVE_CODE> <SEQ2_EMISSIVE_CODE>#SEQ1_EMISSIVE_CODE#</SEQ2_EMISSIVE_CODE> </Condition> </UseTemplate> </Case> <Case Value="SWITCH"> <Switch Param="TYPE"> <Case Value="SWITCH_2States"> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <UseInputEvent ID="ELECTRICAL"/> <UseTemplate Name="ASOBO_GT_Switch_Code"/> </Component> </Case> <Case Value="SWITCH_3States"> <Component ID="ELECTRICAL_ExternalPower"> <UseTemplate Name="ASOBO_GT_Switch_Covered"> <NUM_STATES>3</NUM_STATES> <INPUT_EVENT_ID>ELECTRICAL</INPUT_EVENT_ID> <COVER_IE_NAME>#BTN_ID#_Cover</COVER_IE_NAME> <COVER_IE_ID_SOURCE>ELECTRICAL</COVER_IE_ID_SOURCE> <CODE_POS_0>(>B:ELECTRICAL_#BTN_ID#_Bus)</CODE_POS_0> <CODE_POS_1>(>B:ELECTRICAL_#BTN_ID#_Starter)</CODE_POS_1> <CODE_POS_2>(>B:ELECTRICAL_#BTN_ID#_Off)</CODE_POS_2> <STATE0_TEST>(B:ELECTRICAL_#BTN_ID#, Number) 0 ==</STATE0_TEST> <STATE1_TEST>(B:ELECTRICAL_#BTN_ID#, Number) 1 ==</STATE1_TEST> <STATE2_TEST>(B:ELECTRICAL_#BTN_ID#, Number) 2 ==</STATE2_TEST> <STR_STATE_0>Bus</STR_STATE_0> <STR_STATE_1>Starter</STR_STATE_1> <STR_STATE_2>Off</STR_STATE_2> <TT_VALUE_0>@TT_Package.GT_STATE_BUS</TT_VALUE_0> <TT_VALUE_1>@TT_Package.GT_STATE_STARTER</TT_VALUE_1> <TT_VALUE_2>@TT_Package.GT_STATE_OFF</TT_VALUE_2> <SET_STATE_0> (A:EXTERNAL POWER ON:#ID#, Bool) ! if{ #ID# (>K:TOGGLE_EXTERNAL_POWER) } 1 #SET_EXTPWR_MAIN_BUS_CONNECTION# 0 #SET_EXTPWR_STARTER_CONNECTION# 1 #SET_STARTER_MAIN_BUS_CONNECTION# </SET_STATE_0> <SET_STATE_1> (A:EXTERNAL POWER ON:#ID#, Bool) ! if{ #ID# (>K:TOGGLE_EXTERNAL_POWER) } 0 #SET_EXTPWR_MAIN_BUS_CONNECTION# 1 #SET_EXTPWR_STARTER_CONNECTION# 0 #SET_STARTER_MAIN_BUS_CONNECTION# </SET_STATE_1> <SET_STATE_2> (A:EXTERNAL POWER ON:#ID#, Bool) if{ #ID# (>K:TOGGLE_EXTERNAL_POWER) } 0 #SET_EXTPWR_MAIN_BUS_CONNECTION# 0 #SET_EXTPWR_STARTER_CONNECTION# 0 #SET_STARTER_MAIN_BUS_CONNECTION# </SET_STATE_2> <TOOLTIP_TITLE>@TT_Package.ELECTRICAL_EXTERNAL_POWER_TITLE</TOOLTIP_TITLE> <TOOLTIP_ENTRY_0>ELECTRICAL_#BTN_ID#</TOOLTIP_ENTRY_0> <TT_DESCRIPTION_ID>@TT_Package.ELECTRICAL_EXTERNAL_POWER_ACTION_SET</TT_DESCRIPTION_ID> <ON_BEFORE_SET_CODE>#GET_STATE_EXTERNAL# </ON_BEFORE_SET_CODE> <ENUM_VAL_TO_POS_EXTERNAL>(A:EXTERNAL POWER ON:#ID#, Bool) if{ l1 l2 ! and l3 and if{ 0 sp4 g2 } els{ 1 sp4 g2 } } els{ 2 sp4 g2 } :2 l4</ENUM_VAL_TO_POS_EXTERNAL> <SIMVAR_TO_WATCH_0>EXTERNAL POWER ON:#ID#</SIMVAR_TO_WATCH_0> </UseTemplate> </Component> </Case> <Case Value="AS04F"> <Component ID="#NODE_ID#_Parent"> <Parameters Type="Override"> <NUM_STATES>3</NUM_STATES> <POS_RESET>0</POS_RESET> <POS_NORM>1</POS_NORM> <POS_OFF>2</POS_OFF> <EXTPWR_ID/> </Parameters> <UseTemplate Name="ASOBO_Electrical_Base_Template"> <IE_NAME>External_Power</IE_NAME> <TT_DESCRIPTION_ID>@TT_Package.ELECTRICAL_EXTERNAL_POWER_ACTION_SET</TT_DESCRIPTION_ID> <GET_STATE_EXTERNAL>(A:EXTERNAL POWER ON:#ID#, bool) sp0</GET_STATE_EXTERNAL> <SET_STATE_#POS_RESET#> 1 #ID# (>K:2:SET_EXTERNAL_POWER) </SET_STATE_#POS_RESET#> <SET_STATE_#POS_NORM#/> <SET_STATE_#POS_OFF#> 0 #ID# (>K:2:SET_EXTERNAL_POWER) </SET_STATE_#POS_OFF#> <STR_STATE_#POS_RESET#>Reset</STR_STATE_#POS_RESET#> <STR_STATE_#POS_NORM#>Norm</STR_STATE_#POS_NORM#> <STR_STATE_#POS_OFF#>Off</STR_STATE_#POS_OFF#> <TT_VALUE_#POS_RESET#>@TT_Package.GT_STATE_RESET</TT_VALUE_#POS_RESET#> <TT_VALUE_#POS_NORM#>@TT_Package.GT_STATE_MODENORM</TT_VALUE_#POS_NORM#> <TT_VALUE_#POS_OFF#>@TT_Package.GT_STATE_OFF</TT_VALUE_#POS_OFF#> <MOMENTARY_SWITCH/> <STATE0_TIMER>0.01</STATE0_TIMER> <STATE_MAX_TIMER>0</STATE_MAX_TIMER> </UseTemplate> </Component> </Case> </Switch> </Case> </Switch> </Template>Parameters initialization:
-
Default
Condition: Switch(INTERACTION_TYPE)
-
Case: SWITCH
Condition: Switch(NUM_STATES)
-
Case: 2
Parameters set:
- TYPE
-
Case: 3
Parameters set:
- TYPE
-
-
-
Default
Parameters set:
- PART_ID
- ANIM_NAME (using ID)
- NODE_ID (using ID)
- POST_CLICK_CODE
- EXTPWR_ID (using ID)
- TOOLTIP_EXTPWR_TITLE
Condition: Switch(INTERACTION_TYPE)
-
Case: PUSH
Condition: Switch(TYPE)
-
Case: AIRBUS
-
Case: BOEING
Parameters set:
- SWAP_SEQ_CONDITION
-
-
Case: SWITCH
Condition: Switch(TYPE)
-
Case: SWITCH_3States
Parameters set:
- COVER_NODE_ID (using ID)
- COVER_ANIM_NAME (using ID)
- GET_STATE_EXTERNAL
- SET_EXTPWR_MAIN_BUS_CONNECTION
- SET_EXTPWR_STARTER_CONNECTION
- SET_STARTER_MAIN_BUS_CONNECTION
-
-
Override
Parameters set:
- TOOLTIP_TITLE (using TOOLTIP_EXTPWR_TITLE)
Condition: Check(TYPE)
-
Case: False
Parameters set:
- TOOLTIP_ENTRY_0 (using ID)
Condition: Switch(INTERACTION_TYPE)
-
Case: PUSH
Parameters set:
- LEFT_SINGLE_CODE (using EXTPWR_ID)
- WWISE_EVENT_1
- WWISE_EVENT_2
- NORMALIZED_TIME_1
- NORMALIZED_TIME_2
Condition: Switch(TYPE)
-
Case: AIRBUS
Parameters set:
- SEQ1_EMISSIVE_CODE (using ID)
- SEQ2_EMISSIVE_CODE (using ID)
-
Case: BOEING
Parameters set:
- ON_STATE_CHANGED (using POST_CLICK_CODE, ID)
- DOWN_STATE_CODE (using EXTPWR_ID)
Condition: Switch(VARIANT)
-
Case: 747
Parameters set:
- SEQ1_EMISSIVE_CODE (using ID, EXTPWR_ID)
- SEQ2_EMISSIVE_CODE (using ID, EXTPWR_ID)
-
Default case:
Parameters set:
- SEQ1_EMISSIVE_CODE (using ID, EXTPWR_ID)
- SEQ2_EMISSIVE_CODE (using ID, EXTPWR_ID)
-
Case: SWITCH
Condition: Switch(TYPE)
-
Case: SWITCH_2States
Parameters set:
- LEFT_SINGLE_CODE (using EXTPWR_ID)
- ANIM_CODE (using EXTPWR_ID)
- WWISE_EVENT_1
- WWISE_EVENT_2
-
Case: SWITCH_3States
Parameters set:
- SWITCH_NODE_ID (using NODE_ID)
- SWITCH_ANIM_NAME (using ANIM_NAME)
- COVER_VAR_NAME (using EXTPWR_ID)
- WWISE_EVENT
- BTN_ID (using EXTPWR_ID)
- EXTPWR_ID
-
Condition: Switch(INTERACTION_TYPE)
-
Case: PUSH
Templates used:
-
ASOBO_GT_Push_Button_Airliner
Parameters set:
- INPUT_EVENT_ID
Condition: Valid(SWAP_SEQ_CONDITION)
-
Case: True
Parameters set:
- SEQ1_EMISSIVE_CODE (using SEQ2_EMISSIVE_CODE)
- SEQ2_EMISSIVE_CODE (using SEQ1_EMISSIVE_CODE)
-
ASOBO_GT_Push_Button_Airliner
-
Case: SWITCH
Condition: Switch(TYPE)
-
Case: SWITCH_2States
Parameters read:
- NODE_ID
Components:
-
#NODE_ID# (Node: #NODE_ID#)
Templates used:
-
Case: SWITCH_3States
Components:
-
ELECTRICAL_ExternalPower
Templates used:
-
ASOBO_GT_Switch_Covered
Parameters set:
- NUM_STATES
- INPUT_EVENT_ID
- COVER_IE_NAME (using BTN_ID)
- COVER_IE_ID_SOURCE
- CODE_POS_0 (using BTN_ID)
- CODE_POS_1 (using BTN_ID)
- CODE_POS_2 (using BTN_ID)
- STATE0_TEST (using BTN_ID)
- STATE1_TEST (using BTN_ID)
- STATE2_TEST (using BTN_ID)
- STR_STATE_0
- STR_STATE_1
- STR_STATE_2
- TT_VALUE_0
- TT_VALUE_1
- TT_VALUE_2
- SET_STATE_0 (using ID, SET_EXTPWR_MAIN_BUS_CONNECTION, SET_EXTPWR_STARTER_CONNECTION, SET_STARTER_MAIN_BUS_CONNECTION)
- SET_STATE_1 (using ID, SET_EXTPWR_MAIN_BUS_CONNECTION, SET_EXTPWR_STARTER_CONNECTION, SET_STARTER_MAIN_BUS_CONNECTION)
- SET_STATE_2 (using ID, SET_EXTPWR_MAIN_BUS_CONNECTION, SET_EXTPWR_STARTER_CONNECTION, SET_STARTER_MAIN_BUS_CONNECTION)
- TOOLTIP_TITLE
- TOOLTIP_ENTRY_0 (using BTN_ID)
- TT_DESCRIPTION_ID
- ON_BEFORE_SET_CODE (using GET_STATE_EXTERNAL)
- ENUM_VAL_TO_POS_EXTERNAL (using ID)
- SIMVAR_TO_WATCH_0 (using ID)
-
ASOBO_GT_Switch_Covered
-
ELECTRICAL_ExternalPower
-
Case: AS04F
Parameters read:
- NODE_ID
Components:
-
#NODE_ID#_Parent
Parameters set:
- NUM_STATES
- POS_RESET
- POS_NORM
- POS_OFF
- EXTPWR_ID
Templates used:
-
ASOBO_Electrical_Base_Template
Parameters set:
- IE_NAME
- TT_DESCRIPTION_ID
- GET_STATE_EXTERNAL (using ID)
- SET_STATE_#POS_RESET# (using ID)
- SET_STATE_#POS_NORM#
- SET_STATE_#POS_OFF# (using ID)
- STR_STATE_#POS_RESET#
- STR_STATE_#POS_NORM#
- STR_STATE_#POS_OFF#
- TT_VALUE_#POS_RESET#
- TT_VALUE_#POS_NORM#
- TT_VALUE_#POS_OFF#
- MOMENTARY_SWITCH
- STATE0_TIMER
- STATE_MAX_TIMER
-
-
Default
-
ASOBO_ELECTRICAL_Push_BatteryCharge_SubTemplate
Definition from XML<Template Name="ASOBO_ELECTRICAL_Push_BatteryCharge_SubTemplate"> <DefaultTemplateParameters> <PART_ID>ELECTRICAL_Push_BatteryCharge</PART_ID> <ANIM_NAME>ELECTRICAL_Push_BatteryCharge_#ID#</ANIM_NAME> <NODE_ID>ELECTRICAL_Push_BatteryCharge_#ID#</NODE_ID> <WWISE_EVENT_1>batterycharge_push_button_on</WWISE_EVENT_1> <WWISE_EVENT_2>batterycharge_push_button_off</WWISE_EVENT_2> </DefaultTemplateParameters> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <UseTemplate Name="ASOBO_GT_Update"> <FREQUENCY>5</FREQUENCY> <UPDATE_CODE> #CHARGE_BUS_ID# (A:1:BUS CONNECTION ON:#HOT_BATTERY_BUS_ID#, Bool) (L:XMLVAR_BatteryChargeDisabled_#ID#) == if{ #CHARGE_BUS_ID# #HOT_BATTERY_BUS_ID# (>K:2:ELECTRICAL_BUS_TO_BUS_CONNECTION_TOGGLE) } </UPDATE_CODE> </UseTemplate> <UseTemplate Name="ASOBO_GT_Push_Button_Airliner"> <LEFT_SINGLE_CODE>(L:XMLVAR_BatteryChargeDisabled_#ID#) ! (>L:XMLVAR_BatteryChargeDisabled_#ID#)</LEFT_SINGLE_CODE> <SEQ1_EMISSIVE_CODE>0</SEQ1_EMISSIVE_CODE> <SEQ2_EMISSIVE_CODE>(L:XMLVAR_BatteryChargeDisabled_#ID#)</SEQ2_EMISSIVE_CODE> </UseTemplate> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- PART_ID
- ANIM_NAME (using ID)
- NODE_ID (using ID)
- WWISE_EVENT_1
- WWISE_EVENT_2
Parameters read:
- NODE_ID
Components:
-
#NODE_ID# (Node: #NODE_ID#)
Templates used:
-
ASOBO_GT_Update
Parameters set:
- FREQUENCY
- UPDATE_CODE (using CHARGE_BUS_ID, HOT_BATTERY_BUS_ID, ID)
-
ASOBO_GT_Push_Button_Airliner
Parameters set:
- LEFT_SINGLE_CODE (using ID)
- SEQ1_EMISSIVE_CODE
- SEQ2_EMISSIVE_CODE (using ID)
-
ASOBO_GT_Update
-
Default
-
ASOBO_ELECTRICAL_Emissive_Battery_Discharge_SubTemplate
Definition from XML<Template Name="ASOBO_ELECTRICAL_Emissive_Battery_Discharge_SubTemplate"> <DefaultTemplateParameters> <NODE_ID>ELECTRICAL_Emissive_Battery_Discharge_#ID#</NODE_ID> </DefaultTemplateParameters> <UseTemplate Name="ASOBO_GT_Component_Emissive_Gauge"> <EMISSIVE_CODE>(A:ELECTRICAL BATTERY LOAD:#ID#, Amps) 0 ></EMISSIVE_CODE> </UseTemplate> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID (using ID)
Templates used:
-
ASOBO_GT_Component_Emissive_Gauge
Parameters set:
- EMISSIVE_CODE (using ID)
-
Default
-
ASOBO_ELECTRICAL_Starter_Template
Definition from XML<Template Name="ASOBO_ELECTRICAL_Starter_Template"> <Parameters Type="Default"> <ANIM_NAME>ELECTRICAL_#INTERACTION_TYPE#_Starter_#ID#</ANIM_NAME> <NODE_ID>ELECTRICAL_#INTERACTION_TYPE#_Starter_#ID#</NODE_ID> <PART_ID>ELECTRICAL_#INTERACTION_TYPE#_Starter</PART_ID> <MOMENTARY_MIN_DURATION>1.5</MOMENTARY_MIN_DURATION> <Condition Valid="COVERED"> <COVER_NODE_ID>ELECTRICAL_#INTERACTION_TYPE#_Starter_#ID#_Cover</COVER_NODE_ID> <COVER_ANIM_NAME>ELECTRICAL_#INTERACTION_TYPE#_Starter_#ID#_Cover</COVER_ANIM_NAME> </Condition> <STARTER_ID>#ID#</STARTER_ID> <TOOLTIP_STARTER_TITLE>@TT_Package.ELECTRICAL_PUSH_START_TITLE</TOOLTIP_STARTER_TITLE> </Parameters> <Parameters Type="Override"> <TOOLTIP_TITLE>#TOOLTIP_STARTER_TITLE#</TOOLTIP_TITLE> <TOOLTIP_ENTRY_0>ELECTRICAL_Starter_#ID#</TOOLTIP_ENTRY_0> <Switch> <Case Valid="USE_ENFORCED_MOMENTARY_MIN_DURATION"> <STOP_STARTER>(O:_Interacting) ! if{ 0 (>K:SET_STARTER#ID#_HELD) }</STOP_STARTER> </Case> <Default> <STOP_STARTER>0 (>K:SET_STARTER#ID#_HELD)</STOP_STARTER> </Default> </Switch> <Condition Valid="PREVENT_STARTER_RELEASE"> <True> <RELEASE_STARTER_CODE/> </True> <False> <Switch Param="INTERACTION_TYPE"> <Case Value="SWITCH"> <RELEASE_STARTER_CODE>0 (>B:ELECTRICAL_Starter_#ID#_Off)</RELEASE_STARTER_CODE> </Case> <Case Value="PUSH"> <RELEASE_STARTER_CODE>0 (>B:ELECTRICAL_Starter_#ID#_Set)</RELEASE_STARTER_CODE> </Case> </Switch> </False> </Condition> </Parameters> <Parameters Type="Default"> <Condition Valid="COVERED"> <LOCK_NODE_ID>#COVER_NODE_ID#</LOCK_NODE_ID> <LOCK_ANIM_NAME>#COVER_ANIM_NAME#</LOCK_ANIM_NAME> </Condition> </Parameters> <Switch Param="INTERACTION_TYPE"> <Case Value="SWITCH"> <Condition Valid="COVERED"> <True> <UseTemplate Name="ASOBO_GT_Switch_Covered"> <INPUT_EVENT_ID>ELECTRICAL</INPUT_EVENT_ID> <COVER_IE_NAME>Starter_#ID#_Cover</COVER_IE_NAME> <COVER_IE_ID_SOURCE>ELECTRICAL</COVER_IE_ID_SOURCE> <SWITCH_NODE_ID>#NODE_ID#</SWITCH_NODE_ID> <SWITCH_ANIM_NAME>#ANIM_NAME#</SWITCH_ANIM_NAME> <COVER_VAR_NAME>XMLVAR_ELECTRICAL_Starter_#ID#_Cover_Opened</COVER_VAR_NAME> <COVER_VAR_TYPE>I</COVER_VAR_TYPE> <SWITCH_TYPE>MOMENTARY</SWITCH_TYPE> <SET_SWITCH_ON>(>B:ELECTRICAL_Starter_#ID#_On)</SET_SWITCH_ON> <SET_SWITCH_OFF>#RELEASE_STARTER_CODE#</SET_SWITCH_OFF> <SWITCH_ANIM_CODE>(B:ELECTRICAL_Starter_#ID#, Bool) 100 *</SWITCH_ANIM_CODE> <WWISE_EVENT_1>starter_switch_on</WWISE_EVENT_1> <WWISE_EVENT_2>starter_switch_off</WWISE_EVENT_2> </UseTemplate> </True> <False> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <UseInputEvent ID="ELECTRICAL"/> <UseTemplate Name="ASOBO_GT_Push_Button"> <OVERRIDE_ANIM_CODE>(B:ELECTRICAL_Starter_#ID#, Bool) 100 *</OVERRIDE_ANIM_CODE> <LEFT_SINGLE_CODE>(>B:ELECTRICAL_Starter_#ID#_On)</LEFT_SINGLE_CODE> <LEFT_LEAVE_CODE>#RELEASE_STARTER_CODE#</LEFT_LEAVE_CODE> <WWISE_EVENT_1>starter_switch_on</WWISE_EVENT_1> <WWISE_EVENT_2>starter_switch_off</WWISE_EVENT_2> </UseTemplate> </Component> </False> </Condition> </Case> <Case Value="PUSH"> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <UseTemplate Name="ASOBO_GT_Update"> <FREQUENCY>5</FREQUENCY> <UPDATE_CODE> (O:XMLVAR_Starter_Held_Down_Duration) 0 > if{ (O:XMLVAR_Starter_Held_Down_Duration) (E:SIMULATION TIME, seconds) < if{ 0 (>O:XMLVAR_Starter_Held_Down_Duration) #STOP_STARTER# } } </UPDATE_CODE> </UseTemplate> <UseInputEvent ID="ELECTRICAL"/> <UseTemplate Name="ASOBO_GT_Push_Button_Held"> <OVERRIDE_ANIM_CODE>(B:ELECTRICAL_Starter_#ID#) 100 *</OVERRIDE_ANIM_CODE> <SWITCH_POSITION_TYPE>L</SWITCH_POSITION_TYPE> <SWITCH_POSITION_VAR>XMLVAR_Starter_State</SWITCH_POSITION_VAR> <Switch> <Case Valid="USE_ENFORCED_MOMENTARY_MIN_DURATION"> <LEFT_SINGLE_CODE>1 (>O:_Interacting) 1 (>B:ELECTRICAL_Starter_#ID#_Set) #MOMENTARY_MIN_DURATION# (E:SIMULATION TIME, seconds) + (>O:XMLVAR_Starter_Held_Down_Duration)</LEFT_SINGLE_CODE> <LEFT_LEAVE_CODE>0 (>O:_Interacting) (O:XMLVAR_Starter_Held_Down_Duration) 0 == if{ #RELEASE_STARTER_CODE# }</LEFT_LEAVE_CODE> <WHEEL_DOWN_CODE>1 (>B:ELECTRICAL_Starter_#ID#_Set) #MOMENTARY_MIN_DURATION# (E:SIMULATION TIME, seconds) + (>O:XMLVAR_Starter_Held_Down_Duration)</WHEEL_DOWN_CODE> </Case> <Default> <LEFT_SINGLE_CODE>1 (>B:ELECTRICAL_Starter_#ID#_Set)</LEFT_SINGLE_CODE> <LEFT_LEAVE_CODE>#RELEASE_STARTER_CODE#</LEFT_LEAVE_CODE> <WHEEL_DOWN_CODE>1 (>B:ELECTRICAL_Starter_#ID#_Set) #MOMENTARY_MIN_DURATION# (E:SIMULATION TIME, seconds) + (>O:XMLVAR_Starter_Held_Down_Duration)</WHEEL_DOWN_CODE> <WHEEL_UP_CODE>#RELEASE_STARTER_CODE# 0 (>O:XMLVAR_Starter_Held_Down_Duration)</WHEEL_UP_CODE> </Default> </Switch> <WWISE_EVENT_1>starter_push_button_on</WWISE_EVENT_1> <WWISE_EVENT_2>starter_push_button_off</WWISE_EVENT_2> </UseTemplate> </Component> </Case> </Switch> </Template>Parameters initialization:
-
Default
Parameters set:
- ANIM_NAME (using INTERACTION_TYPE, ID)
- NODE_ID (using INTERACTION_TYPE, ID)
- PART_ID (using INTERACTION_TYPE)
- MOMENTARY_MIN_DURATION
- STARTER_ID (using ID)
- TOOLTIP_STARTER_TITLE
Condition: Valid(COVERED)
-
Case: True
Parameters set:
- COVER_NODE_ID (using INTERACTION_TYPE, ID)
- COVER_ANIM_NAME (using INTERACTION_TYPE, ID)
-
Override
Parameters set:
- TOOLTIP_TITLE (using TOOLTIP_STARTER_TITLE)
- TOOLTIP_ENTRY_0 (using ID)
Condition: Switch
-
Case: Valid(USE_ENFORCED_MOMENTARY_MIN_DURATION)
Parameters set:
- STOP_STARTER (using ID)
-
Default case:
Parameters set:
- STOP_STARTER (using ID)
Condition: Valid(PREVENT_STARTER_RELEASE)
-
Case: True
Parameters set:
- RELEASE_STARTER_CODE
-
Case: False
Condition: Switch(INTERACTION_TYPE)
-
Case: SWITCH
Parameters set:
- RELEASE_STARTER_CODE (using ID)
-
Case: PUSH
Parameters set:
- RELEASE_STARTER_CODE (using ID)
-
-
Default
Condition: Valid(COVERED)
-
Case: True
Parameters set:
- LOCK_NODE_ID (using COVER_NODE_ID)
- LOCK_ANIM_NAME (using COVER_ANIM_NAME)
-
Condition: Switch(INTERACTION_TYPE)
-
Case: SWITCH
Condition: Valid(COVERED)
-
Case: True
Templates used:
-
ASOBO_GT_Switch_Covered
Parameters set:
- INPUT_EVENT_ID
- COVER_IE_NAME (using ID)
- COVER_IE_ID_SOURCE
- SWITCH_NODE_ID (using NODE_ID)
- SWITCH_ANIM_NAME (using ANIM_NAME)
- COVER_VAR_NAME (using ID)
- COVER_VAR_TYPE
- SWITCH_TYPE
- SET_SWITCH_ON (using ID)
- SET_SWITCH_OFF (using RELEASE_STARTER_CODE)
- SWITCH_ANIM_CODE (using ID)
- WWISE_EVENT_1
- WWISE_EVENT_2
-
ASOBO_GT_Switch_Covered
-
Case: False
Parameters read:
- NODE_ID
Components:
-
#NODE_ID# (Node: #NODE_ID#)
Templates used:
-
ASOBO_GT_Push_Button
Parameters set:
- OVERRIDE_ANIM_CODE (using ID)
- LEFT_SINGLE_CODE (using ID)
- LEFT_LEAVE_CODE (using RELEASE_STARTER_CODE)
- WWISE_EVENT_1
- WWISE_EVENT_2
-
ASOBO_GT_Push_Button
-
-
Case: PUSH
Parameters read:
- NODE_ID
Components:
-
#NODE_ID# (Node: #NODE_ID#)
Templates used:
-
ASOBO_GT_Update
Parameters set:
- FREQUENCY
- UPDATE_CODE (using STOP_STARTER)
-
ASOBO_GT_Push_Button_Held
Parameters set:
- OVERRIDE_ANIM_CODE (using ID)
- SWITCH_POSITION_TYPE
- SWITCH_POSITION_VAR
- WWISE_EVENT_1
- WWISE_EVENT_2
Condition: Switch
-
Case: Valid(USE_ENFORCED_MOMENTARY_MIN_DURATION)
Parameters set:
- LEFT_SINGLE_CODE (using ID, MOMENTARY_MIN_DURATION)
- LEFT_LEAVE_CODE (using RELEASE_STARTER_CODE)
- WHEEL_DOWN_CODE (using ID, MOMENTARY_MIN_DURATION)
-
Default case:
Parameters set:
- LEFT_SINGLE_CODE (using ID)
- LEFT_LEAVE_CODE (using RELEASE_STARTER_CODE)
- WHEEL_DOWN_CODE (using ID, MOMENTARY_MIN_DURATION)
- WHEEL_UP_CODE (using RELEASE_STARTER_CODE)
-
ASOBO_GT_Update
-
Default
-
ASOBO_ELECTRICAL_Knob_Master_SubTemplate
Definition from XML<Template Name="ASOBO_ELECTRICAL_Knob_Master_SubTemplate"> <Parameters Type="Default"> <NODE_ID>ELECTRICAL_Knob_Master</NODE_ID> <ANIM_NAME>ELECTRICAL_Knob_Master</ANIM_NAME> <PART_ID>Electrical_Knob_Master</PART_ID> <ID_BATTERY>#ID#</ID_BATTERY> <ID_ALTERNATOR>#ID#</ID_ALTERNATOR> <ID_STARTER>#ID#</ID_STARTER> <SWITCH_POSITION_TYPE_ISDOWN>L</SWITCH_POSITION_TYPE_ISDOWN> <SWITCH_POSITION_VAR_ISDOWN>XMLVAR_Starter_IsHeld</SWITCH_POSITION_VAR_ISDOWN> <SWITCH_POSITION_TYPE>O</SWITCH_POSITION_TYPE> <SWITCH_POSITION_VAR>XMLVAR_Master_SwitchState</SWITCH_POSITION_VAR> <Switch Param="SWITCH_TYPE"> <Case Value="OFF_ON_START"> <POS_OFF>0</POS_OFF> <POS_ON>1</POS_ON> <POS_START>2</POS_START> <SWITCH_DIRECTION>Horizontal</SWITCH_DIRECTION> <ARROW_TYPE>Curved</ARROW_TYPE> <ON_MASTER_OFF/> <ON_MASTER_ON/> <ON_MASTER_START/> <INTERACTION_TYPE>Knob</INTERACTION_TYPE> </Case> </Switch> <WWISE_PREFIX>electrical_master</WWISE_PREFIX> <TOOLTIP_TITLE>@TT_Package.ELECTRICAL_BATTERY_MASTER_TITLE</TOOLTIP_TITLE> <TT_DESCRIPTION_ID>@TT_Package.ELECTRICAL_BATTERY_MASTER_ACTION_SET</TT_DESCRIPTION_ID> </Parameters> <Switch Param="SWITCH_TYPE"> <Case Value="OFF_ON_START"> <UseTemplate Name="ASOBO_ELECTRICAL_Base_Template"> <IE_NAME>Master_#ID#</IE_NAME> <Switch Param="INTERACTION_TYPE"> <Case Value="Knob"> <KNOB_TYPE>X_STATES</KNOB_TYPE> </Case> </Switch> <NUM_STATES>3</NUM_STATES> <MOMENTARY_SWITCH/> <STATE_MAX_TIMER>2</STATE_MAX_TIMER> <STATE0_TIMER>0</STATE0_TIMER> <SIMVAR_TO_WATCH_0>GENERAL ENG STARTER:#ID_STARTER#</SIMVAR_TO_WATCH_0> <SIMVAR_TO_WATCH_1>ELECTRICAL MASTER BATTERY:#ID_BATTERY#</SIMVAR_TO_WATCH_1> <SIMVAR_TO_WATCH_2>GENERAL ENG MASTER ALTERNATOR:#ID_ALTERNATOR#</SIMVAR_TO_WATCH_2> <SET_STATE_#POS_OFF#> #ID_BATTERY# (>K:MASTER_BATTERY_OFF) #ID_ALTERNATOR# (>K:ALTERNATOR_OFF) (A:GENERAL ENG STARTER:#ID_STARTER#, Bool) if{ 0 (>K:SET_STARTER#ID_STARTER#_HELD) } #ON_MASTER_OFF# </SET_STATE_#POS_OFF#> <SET_STATE_#POS_ON#> #ID_BATTERY# (>K:MASTER_BATTERY_ON) #ID_ALTERNATOR# (>K:ALTERNATOR_ON) (A:GENERAL ENG STARTER:#ID_STARTER#, Bool) if{ 0 (>K:SET_STARTER#ID_STARTER#_HELD) } #ON_MASTER_ON# </SET_STATE_#POS_ON#> <SET_STATE_#POS_START#> #ID_BATTERY# (>K:MASTER_BATTERY_ON) #ID_ALTERNATOR# (>K:ALTERNATOR_ON) 1 (>K:SET_STARTER#ID_STARTER#_HELD) #ON_MASTER_START# </SET_STATE_#POS_START#> <STR_STATE_#POS_OFF#>Off</STR_STATE_#POS_OFF#> <STR_STATE_#POS_ON#>On</STR_STATE_#POS_ON#> <STR_STATE_#POS_START#>Start</STR_STATE_#POS_START#> <TT_VALUE_#POS_OFF#>@TT_Package.GT_STATE_OFF</TT_VALUE_#POS_OFF#> <TT_VALUE_#POS_ON#>@TT_Package.GT_STATE_ON</TT_VALUE_#POS_ON#> <TT_VALUE_#POS_START#>@TT_Package.GT_STATE_START</TT_VALUE_#POS_START#> <GET_STATE_EXTERNAL>(A:GENERAL ENG STARTER:#ID_STARTER#, Bool) sp0 (A:ELECTRICAL MASTER BATTERY:#ID_BATTERY#, Bool) sp1 (A:GENERAL ENG MASTER ALTERNATOR:#ID_ALTERNATOR#, Bool) sp2</GET_STATE_EXTERNAL> <ENUM_VAL_TO_POS_EXTERNAL> l1 ! if{ l0 if{ 0 (>K:SET_STARTER#ID_STARTER#_HELD) } #POS_OFF# sp3 g1 } els{ #POS_START# #POS_ON# l0 ? sp3 g1 } :1 l1 l2 != if{ #ID_ALTERNATOR# (>K:TOGGLE_MASTER_ALTERNATOR) } l3 </ENUM_VAL_TO_POS_EXTERNAL> </UseTemplate> </Case> </Switch> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID
- ANIM_NAME
- PART_ID
- ID_BATTERY (using ID)
- ID_ALTERNATOR (using ID)
- ID_STARTER (using ID)
- SWITCH_POSITION_TYPE_ISDOWN
- SWITCH_POSITION_VAR_ISDOWN
- SWITCH_POSITION_TYPE
- SWITCH_POSITION_VAR
- WWISE_PREFIX
- TOOLTIP_TITLE
- TT_DESCRIPTION_ID
Condition: Switch(SWITCH_TYPE)
-
Case: OFF_ON_START
Parameters set:
- POS_OFF
- POS_ON
- POS_START
- SWITCH_DIRECTION
- ARROW_TYPE
- ON_MASTER_OFF
- ON_MASTER_ON
- ON_MASTER_START
- INTERACTION_TYPE
Condition: Switch(SWITCH_TYPE)
-
Case: OFF_ON_START
Templates used:
-
ASOBO_ELECTRICAL_Base_Template
Parameters set:
- IE_NAME (using ID)
- NUM_STATES
- MOMENTARY_SWITCH
- STATE_MAX_TIMER
- STATE0_TIMER
- SIMVAR_TO_WATCH_0 (using ID_STARTER)
- SIMVAR_TO_WATCH_1 (using ID_BATTERY)
- SIMVAR_TO_WATCH_2 (using ID_ALTERNATOR)
- SET_STATE_#POS_OFF# (using ID_BATTERY, ID_ALTERNATOR, ID_STARTER, ON_MASTER_OFF)
- SET_STATE_#POS_ON# (using ID_BATTERY, ID_ALTERNATOR, ID_STARTER, ON_MASTER_ON)
- SET_STATE_#POS_START# (using ID_BATTERY, ID_ALTERNATOR, ID_STARTER, ON_MASTER_START)
- STR_STATE_#POS_OFF#
- STR_STATE_#POS_ON#
- STR_STATE_#POS_START#
- TT_VALUE_#POS_OFF#
- TT_VALUE_#POS_ON#
- TT_VALUE_#POS_START#
- GET_STATE_EXTERNAL (using ID_STARTER, ID_BATTERY, ID_ALTERNATOR)
- ENUM_VAL_TO_POS_EXTERNAL (using ID_STARTER, POS_OFF, POS_START, POS_ON, ID_ALTERNATOR)
Condition: Switch(INTERACTION_TYPE)
-
Case: Knob
Parameters set:
- KNOB_TYPE
-
ASOBO_ELECTRICAL_Base_Template
-
Default
-
ASOBO_ELECTRICAL_Switch_Battery_STBY_SubTemplate
Definition from XML<Template Name="ASOBO_ELECTRICAL_Switch_Battery_STBY_SubTemplate"> <DefaultTemplateParameters> <ANIM_NAME>ELECTRICAL_Switch_Battery_STBY</ANIM_NAME> <NODE_ID>ELECTRICAL_Switch_Battery_STBY</NODE_ID> <PART_ID>ELECTRICAL_Switch_Battery_STBY</PART_ID> <BATTERY_ID>#ID#</BATTERY_ID> <Condition Check="TEST_LIGHT_NODE_ID"> <SWITCH_POS_TEST>2</SWITCH_POS_TEST> </Condition> <TOGGLE_COND>1</TOGGLE_COND> <TOGGLE_CODE/> <TOOLTIP_BATTERY_TITLE>@TT_Package.ELECTRICAL_SWITCH_BATTERY_STANDBY_TITLE</TOOLTIP_BATTERY_TITLE> </DefaultTemplateParameters> <OverrideTemplateParameters> <TOOLTIP_TITLE>#TOOLTIP_BATTERY_TITLE#</TOOLTIP_TITLE> <TOOLTIP_ENTRY_0>ELECTRICAL_Battery_STBY_#BATTERY_ID#</TOOLTIP_ENTRY_0> <CODE_POS_0> (A:ELECTRICAL MASTER BATTERY:#BATTERY_ID#, bool) ! if{ #BATTERY_ID# (>K:TOGGLE_MASTER_BATTERY) } #TOGGLE_COND# if{ #TOGGLE_CODE# } 0 (>L:XMLVAR_STBYBattery_Test) </CODE_POS_0> <CODE_POS_1> (A:ELECTRICAL MASTER BATTERY:#BATTERY_ID#, bool) if{ #BATTERY_ID# (>K:TOGGLE_MASTER_BATTERY) } #TOGGLE_COND# if{ #TOGGLE_CODE# } 0 (>L:XMLVAR_STBYBattery_Test) </CODE_POS_1> <CODE_POS_2> (A:ELECTRICAL MASTER BATTERY:#BATTERY_ID#, bool) if{ #BATTERY_ID# (>K:TOGGLE_MASTER_BATTERY) } 1 (>L:XMLVAR_STBYBattery_Test) </CODE_POS_2> <STATE0_TEST>(L:XMLVAR_STBYBattery_Test) ! (A:ELECTRICAL MASTER BATTERY:#BATTERY_ID#, bool)</STATE0_TEST> <STATE1_TEST>(L:XMLVAR_STBYBattery_Test) ! (A:ELECTRICAL MASTER BATTERY:#BATTERY_ID#, bool) ! and</STATE1_TEST> <STATE2_TEST>(L:XMLVAR_STBYBattery_Test) (A:ELECTRICAL MASTER BATTERY:#BATTERY_ID#, bool) ! and</STATE2_TEST> <SWITCH_POSITION_TYPE>L</SWITCH_POSITION_TYPE> <SWITCH_POSITION_VAR>XMLVAR_BatterySTBY_SwitchState</SWITCH_POSITION_VAR> </OverrideTemplateParameters> <Component ID="ELECTRICAL_Battery_STBY"> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <Update Frequency="5"> #TOGGLE_COND# if{ #TOGGLE_CODE# } </Update> <UseInputEvent ID="ELECTRICAL"> <STBY_BATTERY_ID>#BATTERY_ID#</STBY_BATTERY_ID> <LOCAL_VAR_TO_WATCH_0>#SWITCH_POSITION_VAR#</LOCAL_VAR_TO_WATCH_0> </UseInputEvent> <UseTemplate Name="ASOBO_GT_Switch_3States"> <MOMENTARY_SWITCH/> <SWITCH_POSITION_TYPE_ISDOWN>L</SWITCH_POSITION_TYPE_ISDOWN> <SWITCH_POSITION_VAR_ISDOWN>XMLVAR_STBYBattery_IsHeld</SWITCH_POSITION_VAR_ISDOWN> <STATE_MAX_TIMER>0.1</STATE_MAX_TIMER> <STATE0_TIMER>0</STATE0_TIMER> <ANIMTIP_0>TT:COCKPIT.TOOLTIPS.BATTERY_STBY_ARM</ANIMTIP_0> <ANIMTIP_1>TT:COCKPIT.TOOLTIPS.BATTERY_STBY_OFF</ANIMTIP_1> <ANIMTIP_2>TT:COCKPIT.TOOLTIPS.BATTERY_STBY_TEST</ANIMTIP_2> </UseTemplate> </Component> <Condition Check="TEST_LIGHT_NODE_ID"> <Component ID="#TEST_LIGHT_NODE_ID#" Node="#TEST_LIGHT_NODE_ID#"> <UseTemplate Name="ASOBO_GT_Emissive_Gauge"> <PART_ID/> <FAILURE>(A:ELECTRICAL BATTERY VOLTAGE:#BATTERY_ID#, volts) 17.0 ></FAILURE> <EMISSIVE_CODE>(L:XMLVAR_STBYBattery_Test)</EMISSIVE_CODE> </UseTemplate> </Component> </Condition> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- ANIM_NAME
- NODE_ID
- PART_ID
- BATTERY_ID (using ID)
- TOGGLE_COND
- TOGGLE_CODE
- TOOLTIP_BATTERY_TITLE
Condition: Check(TEST_LIGHT_NODE_ID)
-
Case: True
Parameters set:
- SWITCH_POS_TEST
-
Override
Parameters set:
- TOOLTIP_TITLE (using TOOLTIP_BATTERY_TITLE)
- TOOLTIP_ENTRY_0 (using BATTERY_ID)
- CODE_POS_0 (using BATTERY_ID, TOGGLE_COND, TOGGLE_CODE)
- CODE_POS_1 (using BATTERY_ID, TOGGLE_COND, TOGGLE_CODE)
- CODE_POS_2 (using BATTERY_ID)
- STATE0_TEST (using BATTERY_ID)
- STATE1_TEST (using BATTERY_ID)
- STATE2_TEST (using BATTERY_ID)
- SWITCH_POSITION_TYPE
- SWITCH_POSITION_VAR
Components:
-
ELECTRICAL_Battery_STBY
Parameters read:
- NODE_ID
Components:
-
#NODE_ID# (Node: #NODE_ID#)
Parameters read:
- TOGGLE_COND
- TOGGLE_CODE
Parameters set:
- STBY_BATTERY_ID (using BATTERY_ID)
- LOCAL_VAR_TO_WATCH_0 (using SWITCH_POSITION_VAR)
Templates used:
-
ASOBO_GT_Switch_3States
Parameters set:
- MOMENTARY_SWITCH
- SWITCH_POSITION_TYPE_ISDOWN
- SWITCH_POSITION_VAR_ISDOWN
- STATE_MAX_TIMER
- STATE0_TIMER
- ANIMTIP_0
- ANIMTIP_1
- ANIMTIP_2
Condition: Check(TEST_LIGHT_NODE_ID)
-
Case: True
Parameters read:
- TEST_LIGHT_NODE_ID
Components:
-
#TEST_LIGHT_NODE_ID# (Node: #TEST_LIGHT_NODE_ID#)
Templates used:
-
ASOBO_GT_Emissive_Gauge
Parameters set:
- PART_ID
- FAILURE (using BATTERY_ID)
- EMISSIVE_CODE
-
ASOBO_GT_Emissive_Gauge
-
Default
-
ASOBO_ELECTRICAL_Switch_Alternator_STBY_SubTemplate
Definition from XML<Template Name="ASOBO_ELECTRICAL_Switch_Alternator_STBY_SubTemplate"> <Parameters Type="Default"> <ANIM_NAME>ELECTRICAL_Switch_Alternator_STBY_#ID#</ANIM_NAME> <NODE_ID>ELECTRICAL_Switch_Alternator_STBY_#ID#</NODE_ID> <PART_ID>ELECTRICAL_Switch_Alternator_STBY</PART_ID> <GEN_ID>2</GEN_ID> <WWISE_EVENT_1>alternator_switch_on</WWISE_EVENT_1> <WWISE_EVENT_2>alternator_switch_off</WWISE_EVENT_2> </Parameters> <Parameters Type="Override"> <IE_CONNECTION_ID>Bus_Alternator_Standby</IE_CONNECTION_ID> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Switch_Connection_Template"> <ON_CONNECTION_ON>#GEN_ID# (>K:ALTERNATOR_ON)</ON_CONNECTION_ON> <ON_CONNECTION_OFF>#GEN_ID# (>K:ALTERNATOR_OFF)</ON_CONNECTION_OFF> <SIMVAR_TO_WATCH_0>GENERAL ENG MASTER ALTERNATOR:#GEN_ID#</SIMVAR_TO_WATCH_0> <IS_CONNECTION_ON>(A:GENERAL ENG MASTER ALTERNATOR:#GEN_ID#, Bool) and</IS_CONNECTION_ON> <ENSURE_VARIABLE_CONSISTENCY>(A:GENERAL ENG MASTER ALTERNATOR:#GEN_ID#, Bool) s0 (B:ELECTRICAL_#IE_CONNECTION_ID#, Bool) != if{ l0 (>B:ELECTRICAL_#IE_CONNECTION_ID#_Set) }</ENSURE_VARIABLE_CONSISTENCY> <TT_DESCRIPTION_ID>@TT_Package.ELECTRICAL_ALTERNATOR_STANBY_ACTION_SET</TT_DESCRIPTION_ID> <TOOLTIP_TITLE>@TT_Package.ELECTRICAL_ALTERNATOR_STANBY_TITLE</TOOLTIP_TITLE> </UseTemplate> <Condition Check="LIGHT_NODE_ID"> <Component ID="#LIGHT_NODE_ID#" Node="#LIGHT_NODE_ID#"> <Parameters Type="Default"> <DEFAULT_EMISSIVE>0.1</DEFAULT_EMISSIVE> </Parameters> <UseTemplate Name="ASOBO_GT_Emissive_Gauge"> <EMISSIVE_CODE>#SOURCE_BUS_ID# (A:1:BUS CONNECTION ON:#DESTINATION_BUS#, Bool) #DEFAULT_EMISSIVE# *</EMISSIVE_CODE> </UseTemplate> </Component> </Condition> </Template>Parameters initialization:
-
Default
Parameters set:
- ANIM_NAME (using ID)
- NODE_ID (using ID)
- PART_ID
- GEN_ID
- WWISE_EVENT_1
- WWISE_EVENT_2
-
Override
Parameters set:
- IE_CONNECTION_ID
Templates used:
-
ASOBO_ELECTRICAL_Switch_Connection_Template
Parameters set:
- ON_CONNECTION_ON (using GEN_ID)
- ON_CONNECTION_OFF (using GEN_ID)
- SIMVAR_TO_WATCH_0 (using GEN_ID)
- IS_CONNECTION_ON (using GEN_ID)
- ENSURE_VARIABLE_CONSISTENCY (using GEN_ID, IE_CONNECTION_ID)
- TT_DESCRIPTION_ID
- TOOLTIP_TITLE
Condition: Check(LIGHT_NODE_ID)
-
Case: True
Parameters read:
- LIGHT_NODE_ID
Components:
-
#LIGHT_NODE_ID# (Node: #LIGHT_NODE_ID#)
Parameters set:
- DEFAULT_EMISSIVE
Templates used:
-
ASOBO_GT_Emissive_Gauge
Parameters set:
- EMISSIVE_CODE (using SOURCE_BUS_ID, DESTINATION_BUS, DEFAULT_EMISSIVE)
-
Default
-
ASOBO_ELECTRICAL_Avionics_Bus_SubTemplate
Definition from XML<Template Name="ASOBO_ELECTRICAL_Avionics_Bus_SubTemplate"> <Parameters Type="Default"> <ANIM_NAME>ELECTRICAL_#INTERACTION_TYPE#_Avionics_Bus_#ID#</ANIM_NAME> <NODE_ID>ELECTRICAL_#INTERACTION_TYPE#_Avionics_Bus_#ID#</NODE_ID> <PART_ID>ELECTRICAL_#INTERACTION_TYPE#_Avionics_Master</PART_ID> <WWISE_PREFIX>avionic</WWISE_PREFIX> <TOOLTIP_TITLE>@TT_Package.ELECTRICAL_SWITCH_AVIONICS_MASTER_TITLE</TOOLTIP_TITLE> <TT_DESCRIPTION_ID>@TT_Package.ELECTRICAL_SWITCH_AVIONICS_MASTER_ACTION_SET</TT_DESCRIPTION_ID> <IE_AVIONICS_BUS_ID>#ID#</IE_AVIONICS_BUS_ID> <Switch Param="TYPE"> <Case Value="MULTI_BUS"> <Switch Param="MULTI_BUS_TYPE"> <Case Value="ON_OFF_COMPOSITE"> <POS_ON>0</POS_ON> <POS_OFF>1</POS_OFF> <POS_COMPOSITE>2</POS_COMPOSITE> <ID_COMPOSITE>2</ID_COMPOSITE> <TT_VALUE_COMPOSITE>@TT_Package.GT_STATE_DISPATCH</TT_VALUE_COMPOSITE> <STR_STATE_COMPOSITE>Composite</STR_STATE_COMPOSITE> </Case> </Switch> <AVIONICS_BUS_ID_1>1</AVIONICS_BUS_ID_1> <SOURCE_BUS_ID_1>-1</SOURCE_BUS_ID_1> <AVIONICS_CIRCUIT_ID_1>1</AVIONICS_CIRCUIT_ID_1> <AVIONICS_BUS_ID_2>1</AVIONICS_BUS_ID_2> <SOURCE_BUS_ID_2>-1</SOURCE_BUS_ID_2> <AVIONICS_CIRCUIT_ID_2>1</AVIONICS_CIRCUIT_ID_2> </Case> <Default> <AVIONICS_BUS_ID>1</AVIONICS_BUS_ID> <SOURCE_BUS_ID>-1</SOURCE_BUS_ID> <AVIONICS_CIRCUIT_ID>1</AVIONICS_CIRCUIT_ID> </Default> </Switch> </Parameters> <Parameters Type="Override"> <Condition NotEmpty="IE_NAME"> <False> <IE_NAME>Avionics_Bus_#IE_AVIONICS_BUS_ID#</IE_NAME> </False> </Condition> </Parameters> <Parameters Type="Override"> <Switch Param="TYPE"> <Case Value="MULTI_BUS"> <SET_CONNECTION_0> s0 (A:CIRCUIT SWITCH ON:#AVIONICS_CIRCUIT_ID_1#, Bool) != if{ #AVIONICS_CIRCUIT_ID_1# (>K:ELECTRICAL_CIRCUIT_TOGGLE) } (A:CIRCUIT SWITCH ON:#AVIONICS_CIRCUIT_ID_1#, Bool) #SOURCE_BUS_ID_1# (A:1:BUS CONNECTION ON:#AVIONICS_BUS_ID_1#, Bool) != if{ #AVIONICS_BUS_ID_1# #SOURCE_BUS_ID_1# (>K:2:ELECTRICAL_BUS_TO_BUS_CONNECTION_TOGGLE) } </SET_CONNECTION_0> <SET_CONNECTION_1> s0 (A:CIRCUIT SWITCH ON:#AVIONICS_CIRCUIT_ID_2#, Bool) != if{ #AVIONICS_CIRCUIT_ID_2# (>K:ELECTRICAL_CIRCUIT_TOGGLE) } (A:CIRCUIT SWITCH ON:#AVIONICS_CIRCUIT_ID_2#, Bool) #SOURCE_BUS_ID_2# (A:1:BUS CONNECTION ON:#AVIONICS_BUS_ID_2#, Bool) != if{ #AVIONICS_BUS_ID_2# #SOURCE_BUS_ID_2# (>K:2:ELECTRICAL_BUS_TO_BUS_CONNECTION_TOGGLE) } </SET_CONNECTION_1> <SIMVAR_TO_WATCH_0>CIRCUIT SWITCH ON:#AVIONICS_CIRCUIT_ID_1#</SIMVAR_TO_WATCH_0> <SIMVAR_TO_WATCH_1>CIRCUIT SWITCH ON:#AVIONICS_CIRCUIT_ID_2#</SIMVAR_TO_WATCH_1> </Case> <Default> <SET_CONNECTION> s0 (A:CIRCUIT SWITCH ON:#AVIONICS_CIRCUIT_ID#, Bool) != if{ #AVIONICS_CIRCUIT_ID# (>K:ELECTRICAL_CIRCUIT_TOGGLE) } (A:CIRCUIT SWITCH ON:#AVIONICS_CIRCUIT_ID#, Bool) #SOURCE_BUS_ID# (A:1:BUS CONNECTION ON:#AVIONICS_BUS_ID#, Bool) != if{ #AVIONICS_BUS_ID# #SOURCE_BUS_ID# (>K:2:ELECTRICAL_BUS_TO_BUS_CONNECTION_TOGGLE) } </SET_CONNECTION> <SIMVAR_TO_WATCH_0>CIRCUIT SWITCH ON:#AVIONICS_CIRCUIT_ID#</SIMVAR_TO_WATCH_0> </Default> </Switch> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Base_Template"> <Switch Param="TYPE"> <Case Value="MULTI_BUS"> <GET_STATE_EXTERNAL>(A:#SIMVAR_TO_WATCH_0#, Bool) sp0 (A:#SIMVAR_TO_WATCH_1#, Bool) sp1</GET_STATE_EXTERNAL> <Switch Param="MULTI_BUS_TYPE"> <Case Value="ON_OFF_COMPOSITE"> <NUM_STATES>3</NUM_STATES> <STR_STATE_#POS_ON#>On</STR_STATE_#POS_ON#> <STR_STATE_#POS_OFF#>Off</STR_STATE_#POS_OFF#> <STR_STATE_#POS_COMPOSITE#>#STR_STATE_COMPOSITE#</STR_STATE_#POS_COMPOSITE#> <TT_VALUE_#POS_ON#>@TT_Package.GT_STATE_ON</TT_VALUE_#POS_ON#> <TT_VALUE_#POS_OFF#>@TT_Package.GT_STATE_OFF</TT_VALUE_#POS_OFF#> <TT_VALUE_#POS_COMPOSITE#>#TT_VALUE_COMPOSITE#</TT_VALUE_#POS_COMPOSITE#> <SET_STATE_#POS_ON#>1 #SET_CONNECTION_0# 1 #SET_CONNECTION_1#</SET_STATE_#POS_ON#> <SET_STATE_#POS_OFF#>0 #SET_CONNECTION_0# 0 #SET_CONNECTION_1#</SET_STATE_#POS_OFF#> <Switch Param="ID_COMPOSITE"> <Case Value="1"> <SET_STATE_#POS_COMPOSITE#>1 #SET_CONNECTION_0# 0 #SET_CONNECTION_1#</SET_STATE_#POS_COMPOSITE#> <ENUM_VAL_TO_POS_EXTERNAL> l0 l1 ! and if{ #POS_COMPOSITE# sp2 g2 } l0 l1 and if{ #POS_ON# sp2 g2 } l0 ! l1 ! and if{ #POS_OFF# sp2 g2 } els{ l0 l1 or s0 sp1 } :2 l0 #SET_CONNECTION_0# l1 #SET_CONNECTION_1# l2 </ENUM_VAL_TO_POS_EXTERNAL> </Case> <Case Value="2"> <SET_STATE_#POS_COMPOSITE#>0 #SET_CONNECTION_0# 1 #SET_CONNECTION_1#</SET_STATE_#POS_COMPOSITE#> <ENUM_VAL_TO_POS_EXTERNAL> l0 ! l1 and if{ #POS_COMPOSITE# sp2 g2 } l0 l1 and if{ #POS_ON# sp2 g2 } l0 ! l1 ! and if{ #POS_OFF# sp2 g2 } els{ l0 l1 or s0 sp1 } :2 l0 #SET_CONNECTION_0# l1 #SET_CONNECTION_1# l2 </ENUM_VAL_TO_POS_EXTERNAL> </Case> </Switch> </Case> <Default> <SET_STATE_EXTERNAL>p0 #SET_CONNECTION_0# p0 #SET_CONNECTION_1#</SET_STATE_EXTERNAL> <ENUM_VAL_TO_POS_EXTERNAL>l0 l1 != if{ l0 sp1 } l0 l1 and sp2 l0 #SET_CONNECTION_0# l1 #SET_CONNECTION_1# l2</ENUM_VAL_TO_POS_EXTERNAL> </Default> </Switch> </Case> <Default> <SET_STATE_EXTERNAL>p0 #SET_CONNECTION#</SET_STATE_EXTERNAL> <GET_STATE_EXTERNAL>(A:#SIMVAR_TO_WATCH_0#, Bool) sp0</GET_STATE_EXTERNAL> <ENUM_VAL_TO_POS_EXTERNAL>l0 #SET_CONNECTION# (A:#SIMVAR_TO_WATCH_0#, Bool)</ENUM_VAL_TO_POS_EXTERNAL> </Default> </Switch> </UseTemplate> </Template>Parameters initialization:
-
Default
Parameters set:
- ANIM_NAME (using INTERACTION_TYPE, ID)
- NODE_ID (using INTERACTION_TYPE, ID)
- PART_ID (using INTERACTION_TYPE)
- WWISE_PREFIX
- TOOLTIP_TITLE
- TT_DESCRIPTION_ID
- IE_AVIONICS_BUS_ID (using ID)
Condition: Switch(TYPE)
-
Case: MULTI_BUS
Parameters set:
- AVIONICS_BUS_ID_1
- SOURCE_BUS_ID_1
- AVIONICS_CIRCUIT_ID_1
- AVIONICS_BUS_ID_2
- SOURCE_BUS_ID_2
- AVIONICS_CIRCUIT_ID_2
Condition: Switch(MULTI_BUS_TYPE)
-
Case: ON_OFF_COMPOSITE
Parameters set:
- POS_ON
- POS_OFF
- POS_COMPOSITE
- ID_COMPOSITE
- TT_VALUE_COMPOSITE
- STR_STATE_COMPOSITE
-
Default case:
Parameters set:
- AVIONICS_BUS_ID
- SOURCE_BUS_ID
- AVIONICS_CIRCUIT_ID
-
Override
Condition: NotEmpty(IE_NAME)
-
Case: False
Parameters set:
- IE_NAME (using IE_AVIONICS_BUS_ID)
-
-
Override
Condition: Switch(TYPE)
-
Case: MULTI_BUS
Parameters set:
- SET_CONNECTION_0 (using AVIONICS_CIRCUIT_ID_1, SOURCE_BUS_ID_1, AVIONICS_BUS_ID_1)
- SET_CONNECTION_1 (using AVIONICS_CIRCUIT_ID_2, SOURCE_BUS_ID_2, AVIONICS_BUS_ID_2)
- SIMVAR_TO_WATCH_0 (using AVIONICS_CIRCUIT_ID_1)
- SIMVAR_TO_WATCH_1 (using AVIONICS_CIRCUIT_ID_2)
-
Default case:
Parameters set:
- SET_CONNECTION (using AVIONICS_CIRCUIT_ID, SOURCE_BUS_ID, AVIONICS_BUS_ID)
- SIMVAR_TO_WATCH_0 (using AVIONICS_CIRCUIT_ID)
-
Templates used:
-
ASOBO_ELECTRICAL_Base_Template
Condition: Switch(TYPE)
-
Case: MULTI_BUS
Parameters set:
- GET_STATE_EXTERNAL (using SIMVAR_TO_WATCH_0, SIMVAR_TO_WATCH_1)
Condition: Switch(MULTI_BUS_TYPE)
-
Case: ON_OFF_COMPOSITE
Parameters set:
- NUM_STATES
- STR_STATE_#POS_ON#
- STR_STATE_#POS_OFF#
- STR_STATE_#POS_COMPOSITE# (using STR_STATE_COMPOSITE)
- TT_VALUE_#POS_ON#
- TT_VALUE_#POS_OFF#
- TT_VALUE_#POS_COMPOSITE# (using TT_VALUE_COMPOSITE)
- SET_STATE_#POS_ON# (using SET_CONNECTION_0, SET_CONNECTION_1)
- SET_STATE_#POS_OFF# (using SET_CONNECTION_0, SET_CONNECTION_1)
Condition: Switch(ID_COMPOSITE)
-
Case: 1
Parameters set:
- SET_STATE_#POS_COMPOSITE# (using SET_CONNECTION_0, SET_CONNECTION_1)
- ENUM_VAL_TO_POS_EXTERNAL (using POS_COMPOSITE, POS_ON, POS_OFF, SET_CONNECTION_0, SET_CONNECTION_1)
-
Case: 2
Parameters set:
- SET_STATE_#POS_COMPOSITE# (using SET_CONNECTION_0, SET_CONNECTION_1)
- ENUM_VAL_TO_POS_EXTERNAL (using POS_COMPOSITE, POS_ON, POS_OFF, SET_CONNECTION_0, SET_CONNECTION_1)
-
Default case:
Parameters set:
- SET_STATE_EXTERNAL (using SET_CONNECTION_0, SET_CONNECTION_1)
- ENUM_VAL_TO_POS_EXTERNAL (using SET_CONNECTION_0, SET_CONNECTION_1)
-
Default case:
Parameters set:
- SET_STATE_EXTERNAL (using SET_CONNECTION)
- GET_STATE_EXTERNAL (using SIMVAR_TO_WATCH_0)
- ENUM_VAL_TO_POS_EXTERNAL (using SET_CONNECTION, SIMVAR_TO_WATCH_0)
-
-
Default
-
ASOBO_ELECTRICAL_Switch_Essential_Bus_SubTemplate
Definition from XML<Template Name="ASOBO_ELECTRICAL_Switch_Essential_Bus_SubTemplate"> <Parameters Type="Default"> <NODE_ID>ELECTRICAL_Switch_Essential_Bus</NODE_ID> <ANIM_NAME>ELECTRICAL_Switch_Essential_Bus</ANIM_NAME> <PART_ID>ELECTRICAL_Switch_Essential_Bus</PART_ID> <MAIN_BUS_ID>1</MAIN_BUS_ID> <ESSENTIAL_BUS_ID>2</ESSENTIAL_BUS_ID> <BATTERY_BUS_ID>3</BATTERY_BUS_ID> <Condition Check="USE_ESSENTIALS_ON_INDICATOR"> <EMISSIVE_NODE_ID>ELECTRICAL_Light_Essential_Bus</EMISSIVE_NODE_ID> </Condition> <TOOLTIP_ESSENTIAL_BUS_TITLE>@TT_Package.SAFETY_SWITCH_ESSENTIALBUS_TITLE</TOOLTIP_ESSENTIAL_BUS_TITLE> </Parameters> <Parameters Type="Override"> <TOOLTIP_TITLE>#TOOLTIP_ESSENTIAL_BUS_TITLE#</TOOLTIP_TITLE> <TOOLTIP_ENTRY_0>ELECTRICAL_EssentialBus_#ESSENTIAL_BUS_ID#</TOOLTIP_ENTRY_0> </Parameters> <Component ID="#NODE_ID#_#ID#" Node="#NODE_ID#"> <UseInputEvent ID="ELECTRICAL"/> <UseTemplate Name="ASOBO_GT_Switch_Code"> <ANIM_CODE>(B:ELECTRICAL_EssentialBus_#ESSENTIAL_BUS_ID#) 100 *</ANIM_CODE> <LEFT_SINGLE_CODE>(>B:ELECTRICAL_EssentialBus_#ESSENTIAL_BUS_ID#_Toggle)</LEFT_SINGLE_CODE> </UseTemplate> </Component> <Condition Check="USE_ESSENTIALS_ON_INDICATOR"> <Component ID="#EMISSIVE_NODE_ID#" Node="#EMISSIVE_NODE_ID#"> <UseTemplate Name="ASOBO_GT_Emissive_Gauge"> <EMISSIVE_CODE>(B:ELECTRICAL_EssentialBus_#ESSENTIAL_BUS_ID#)</EMISSIVE_CODE> </UseTemplate> </Component> </Condition> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID
- ANIM_NAME
- PART_ID
- MAIN_BUS_ID
- ESSENTIAL_BUS_ID
- BATTERY_BUS_ID
- TOOLTIP_ESSENTIAL_BUS_TITLE
Condition: Check(USE_ESSENTIALS_ON_INDICATOR)
-
Case: True
Parameters set:
- EMISSIVE_NODE_ID
-
Override
Parameters set:
- TOOLTIP_TITLE (using TOOLTIP_ESSENTIAL_BUS_TITLE)
- TOOLTIP_ENTRY_0 (using ESSENTIAL_BUS_ID)
Parameters read:
- NODE_ID
- ID
Components:
-
#NODE_ID#_#ID# (Node: #NODE_ID#)
Templates used:
-
ASOBO_GT_Switch_Code
Parameters set:
- ANIM_CODE (using ESSENTIAL_BUS_ID)
- LEFT_SINGLE_CODE (using ESSENTIAL_BUS_ID)
-
ASOBO_GT_Switch_Code
Condition: Check(USE_ESSENTIALS_ON_INDICATOR)
-
Case: True
Parameters read:
- EMISSIVE_NODE_ID
Components:
-
#EMISSIVE_NODE_ID# (Node: #EMISSIVE_NODE_ID#)
Templates used:
-
ASOBO_GT_Emissive_Gauge
Parameters set:
- EMISSIVE_CODE (using ESSENTIAL_BUS_ID)
-
ASOBO_GT_Emissive_Gauge
-
Default
-
ASOBO_ELECTRICAL_Switch_Bus_SubTemplate
Definition from XML<Template Name="ASOBO_ELECTRICAL_Switch_Bus_SubTemplate"> <DefaultTemplateParameters> <NODE_ID>ELECTRICAL_Switch_Bus_#ID#</NODE_ID> <ANIM_NAME>ELECTRICAL_Switch_Bus_#ID#</ANIM_NAME> <PART_ID>ELECTRICAL_Switch_Bus</PART_ID> <WWISE_EVENT_1>bus_tie_switch_on</WWISE_EVENT_1> <WWISE_EVENT_2>bus_tie_switch_off</WWISE_EVENT_2> <AUDIO_NORMALIZED_TIME_1>0.1</AUDIO_NORMALIZED_TIME_1> <AUDIO_NORMALIZED_TIME_2>0.5</AUDIO_NORMALIZED_TIME_2> <ON_TOOLTIP/> <OFF_TOOLTIP/> </DefaultTemplateParameters> <OverrideTemplateParameters> <LEFT_SINGLE_CODE>#SOURCE_ID# #ID# (>K:2:ELECTRICAL_BUS_TO_BUS_CONNECTION_TOGGLE)</LEFT_SINGLE_CODE> <Switch Param="TYPE"> <Case Value="BOEING"> <IS_AIRLINER>True</IS_AIRLINER> <SEQ1_EMISSIVE_CODE>#SOURCE_ID# (A:1:BUS CONNECTION ON:#ID#, Bool)</SEQ1_EMISSIVE_CODE> <SEQ2_EMISSIVE_CODE>#SOURCE_ID# (A:1:BUS CONNECTION ON:#ID#, Bool) !</SEQ2_EMISSIVE_CODE> <TOOLTIPID>%(#SOURCE_ID# (A:1:BUS CONNECTION ON:#ID#, Bool) !)%{if}TT:#OFF_TOOLTIP#%{else}TT:#ON_TOOLTIP#%{end}</TOOLTIPID> </Case> <Default> <IS_AIRLINER>False</IS_AIRLINER> </Default> </Switch> </OverrideTemplateParameters> <Condition Check="IS_AIRLINER" Match="True"> <True> <UseTemplate Name="ASOBO_GT_Push_Button_Airliner"/> </True> <False> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <UseTemplate Name="ASOBO_GT_Push_Button"/> </Component> </False> </Condition> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID (using ID)
- ANIM_NAME (using ID)
- PART_ID
- WWISE_EVENT_1
- WWISE_EVENT_2
- AUDIO_NORMALIZED_TIME_1
- AUDIO_NORMALIZED_TIME_2
- ON_TOOLTIP
- OFF_TOOLTIP
-
Override
Parameters set:
- LEFT_SINGLE_CODE (using SOURCE_ID, ID)
Condition: Switch(TYPE)
-
Case: BOEING
Parameters set:
- IS_AIRLINER
- SEQ1_EMISSIVE_CODE (using SOURCE_ID, ID)
- SEQ2_EMISSIVE_CODE (using SOURCE_ID, ID)
- TOOLTIPID (using SOURCE_ID, ID, OFF_TOOLTIP, ON_TOOLTIP)
-
Default case:
Parameters set:
- IS_AIRLINER
Condition: Check(IS_AIRLINER)
-
Case: True
Templates used:
-
Case: False
Parameters read:
- NODE_ID
Components:
-
#NODE_ID# (Node: #NODE_ID#)
Templates used:
-
Default
-
ASOBO_ELECTRICAL_Circuit_SubTemplate
Definition from XML<Template Name="ASOBO_ELECTRICAL_Circuit_SubTemplate"> <Parameters Type="Default"> <NODE_ID>ELECTRICAL_#INTERACTION_TYPE#_Circuit_#ID#</NODE_ID> <ANIM_NAME>ELECTRICAL_#INTERACTION_TYPE#_Circuit_#ID#</ANIM_NAME> <PART_ID>ELECTRICAL_#INTERACTION_TYPE#_Circuit</PART_ID> <Switch Param="INTERACTION_TYPE"> <Case Value="Switch"> <WWISE_EVENT_1>electrical_circuit_switch_on</WWISE_EVENT_1> <WWISE_EVENT_2>electrical_circuit_switch_off</WWISE_EVENT_2> <AUDIO_NORMALIZED_TIME_1>0.1</AUDIO_NORMALIZED_TIME_1> <AUDIO_NORMALIZED_TIME_2>0.5</AUDIO_NORMALIZED_TIME_2> </Case> <Case Value="Push"> <WWISE_EVENT_1>electrical_circuit_switch_on</WWISE_EVENT_1> <WWISE_EVENT_2>electrical_circuit_switch_off</WWISE_EVENT_2> <NORMALIZED_TIME_1>0.1</NORMALIZED_TIME_1> <NORMALIZED_TIME_2>0.5</NORMALIZED_TIME_2> </Case> </Switch> <IE_CIRCUIT_ID>Circuit_#CIRCUIT_ID#</IE_CIRCUIT_ID> </Parameters> <Parameters Type="Override"> <BTN_ID>#IE_CIRCUIT_ID#</BTN_ID> <IS_CIRCUIT_ON>(A:CIRCUIT SWITCH ON:#CIRCUIT_ID#, Bool)</IS_CIRCUIT_ON> </Parameters> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <Parameters Type="Override"> <TOOLTIP_ENTRY_0>ELECTRICAL_#BTN_ID#</TOOLTIP_ENTRY_0> </Parameters> <UseInputEvent ID="ELECTRICAL"> <SET_STATE_EXTERNAL>#IS_CIRCUIT_ON# p0 != if{ #CIRCUIT_ID# (>K:ELECTRICAL_CIRCUIT_TOGGLE) }</SET_STATE_EXTERNAL> <GET_STATE_EXTERNAL>#IS_CIRCUIT_ON# sp0</GET_STATE_EXTERNAL> <SIM_STATE_IS_ON_EXTERNAL>l0</SIM_STATE_IS_ON_EXTERNAL> <SIMVAR_TO_WATCH_0>CIRCUIT SWITCH ON:#CIRCUIT_ID#</SIMVAR_TO_WATCH_0> <ANIM>EXTERNAL</ANIM> </UseInputEvent> <Switch Param="INTERACTION_TYPE"> <Case Value="Switch"> <UseTemplate Name="ASOBO_GT_Switch_Code"> <ANIM_CODE>(B:ELECTRICAL_#BTN_ID#, Bool) 100 *</ANIM_CODE> <LEFT_SINGLE_CODE>(>B:ELECTRICAL_#BTN_ID#_Toggle)</LEFT_SINGLE_CODE> </UseTemplate> </Case> <Case Value="Push"> <UseTemplate Name="ASOBO_GT_Push_Button"> <LEFT_SINGLE_CODE>(>B:ELECTRICAL_#BTN_ID#_Toggle)</LEFT_SINGLE_CODE> </UseTemplate> </Case> </Switch> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID (using INTERACTION_TYPE, ID)
- ANIM_NAME (using INTERACTION_TYPE, ID)
- PART_ID (using INTERACTION_TYPE)
- IE_CIRCUIT_ID (using CIRCUIT_ID)
Condition: Switch(INTERACTION_TYPE)
-
Case: Switch
Parameters set:
- WWISE_EVENT_1
- WWISE_EVENT_2
- AUDIO_NORMALIZED_TIME_1
- AUDIO_NORMALIZED_TIME_2
-
Case: Push
Parameters set:
- WWISE_EVENT_1
- WWISE_EVENT_2
- NORMALIZED_TIME_1
- NORMALIZED_TIME_2
-
Override
Parameters set:
- BTN_ID (using IE_CIRCUIT_ID)
- IS_CIRCUIT_ON (using CIRCUIT_ID)
Parameters read:
- NODE_ID
Components:
-
#NODE_ID# (Node: #NODE_ID#)
Parameters set:
- TOOLTIP_ENTRY_0 (using BTN_ID)
- SET_STATE_EXTERNAL (using IS_CIRCUIT_ON, CIRCUIT_ID)
- GET_STATE_EXTERNAL (using IS_CIRCUIT_ON)
- SIM_STATE_IS_ON_EXTERNAL
- SIMVAR_TO_WATCH_0 (using CIRCUIT_ID)
- ANIM
Condition: Switch(INTERACTION_TYPE)
-
Case: Switch
Templates used:
-
ASOBO_GT_Switch_Code
Parameters set:
- ANIM_CODE (using BTN_ID)
- LEFT_SINGLE_CODE (using BTN_ID)
-
ASOBO_GT_Switch_Code
-
Case: Push
Templates used:
-
ASOBO_GT_Push_Button
Parameters set:
- LEFT_SINGLE_CODE (using BTN_ID)
-
ASOBO_GT_Push_Button
-
Default
-
ASOBO_ELECTRICAL_Switch_Breaker_Template
Definition from XML<Template Name="ASOBO_ELECTRICAL_Switch_Breaker_Template"> <DefaultTemplateParameters> <BUS_INDEX>-1</BUS_INDEX> <WWISE_EVENT_1>breaker_switch_on</WWISE_EVENT_1> <WWISE_EVENT_2>breaker_switch_off</WWISE_EVENT_2> </DefaultTemplateParameters> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <Condition Check="NEW_IE"> <True> <Parameters Type="Default"> <ANIM_NAME>ELECTRICAL_BREAKER_COM</ANIM_NAME> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Base_Template"> <EXTRA_OPTION/> <CREATE_COMPONENT>False</CREATE_COMPONENT> <IE_NAME>RADIO_Breaker</IE_NAME> <WWISE_PREFIX>breaker</WWISE_PREFIX> <TOOLTIP_TITLE>@TT_Package.GT_STATE_COM</TOOLTIP_TITLE> <TT_DESCRIPTION>@TT_Package.AS510_SWITCH_POWER_ACTION</TT_DESCRIPTION> <TT_DESCRIPTION_IS_DYNAMIC>@TT_Package.AS510_SWITCH_POWER_ACTION</TT_DESCRIPTION_IS_DYNAMIC> <SET_STATE_EXTERNAL>#CIRCUIT_INDEX# #BUS_INDEX# (>K:2:ELECTRICAL_CIRCUIT_BREAKER_TOGGLE)</SET_STATE_EXTERNAL> <GET_STATE_EXTERNAL>(A:CIRCUIT ON:#CIRCUIT_INDEX#, Bool) sp0</GET_STATE_EXTERNAL> <TT_VALUE>(A:CIRCUIT ON:#CIRCUIT_INDEX#, Bool) @TT_OnOff_Cond</TT_VALUE> <TT_VALUE_IS_DYNAMIC>True</TT_VALUE_IS_DYNAMIC> <INTERACTION_TYPE>Switch</INTERACTION_TYPE> <INIT_CODE/> <INVERT_ANIM/> </UseTemplate> </True> <False> <UseTemplate Name="ASOBO_GT_Switch_Code"> <Condition Check="CIRCUIT_INDEX"> <True> <ANIM_CODE>#BUS_INDEX# (>A:BUS LOOKUP INDEX, Number) (A:CIRCUIT BREAKER PULLED:#CIRCUIT_INDEX#, Bool) 100 *</ANIM_CODE> <LEFT_SINGLE_CODE>#CIRCUIT_INDEX# #BUS_INDEX# (>K:2:ELECTRICAL_CIRCUIT_BREAKER_TOGGLE)</LEFT_SINGLE_CODE> </True> <False> <ANIM_CODE>(A:BREAKER #CIRCUIT_NAME#, Bool) 100 *</ANIM_CODE> <LEFT_SINGLE_CODE>(>K:BREAKER_#CIRCUIT_NAME#_TOGGLE)</LEFT_SINGLE_CODE> </False> </Condition> </UseTemplate> </False> </Condition> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- BUS_INDEX
- WWISE_EVENT_1
- WWISE_EVENT_2
Parameters read:
- NODE_ID
Components:
-
#NODE_ID# (Node: #NODE_ID#)
Condition: Check(NEW_IE)
-
Case: True
Parameters set:
- ANIM_NAME
Templates used:
-
ASOBO_ELECTRICAL_Base_Template
Parameters set:
- EXTRA_OPTION
- CREATE_COMPONENT
- IE_NAME
- WWISE_PREFIX
- TOOLTIP_TITLE
- TT_DESCRIPTION
- TT_DESCRIPTION_IS_DYNAMIC
- SET_STATE_EXTERNAL (using CIRCUIT_INDEX, BUS_INDEX)
- GET_STATE_EXTERNAL (using CIRCUIT_INDEX)
- TT_VALUE (using CIRCUIT_INDEX)
- TT_VALUE_IS_DYNAMIC
- INTERACTION_TYPE
- INIT_CODE
- INVERT_ANIM
-
Case: False
Templates used:
-
ASOBO_GT_Switch_Code
Condition: Check(CIRCUIT_INDEX)
-
Case: True
Parameters set:
- ANIM_CODE (using BUS_INDEX, CIRCUIT_INDEX)
- LEFT_SINGLE_CODE (using CIRCUIT_INDEX, BUS_INDEX)
-
Case: False
Parameters set:
- ANIM_CODE (using CIRCUIT_NAME)
- LEFT_SINGLE_CODE (using CIRCUIT_NAME)
-
-
ASOBO_GT_Switch_Code
-
-
Default
-
ASOBO_ELECTRICAL_Emissive_Bus_SubTemplate
Definition from XML<Template Name="ASOBO_ELECTRICAL_Emissive_Bus_SubTemplate"> <UseTemplate Name="ASOBO_GT_Component_Emissive_Gauge"> <EMISSIVE_CODE>(A:ELECTRICAL MAIN BUS VOLTAGE:#BUS_INDEX#, volts) 0 ==</EMISSIVE_CODE> </UseTemplate> </Template>Templates used:
-
ASOBO_GT_Component_Emissive_Gauge
Parameters set:
- EMISSIVE_CODE (using BUS_INDEX)
-
ASOBO_GT_Component_Emissive_Gauge
-
ASOBO_ELECTRICAL_Procedure_SubTemplate
Definition from XML<Template Name="ASOBO_ELECTRICAL_Procedure_SubTemplate"> <Parameters Type="Default"> <NODE_ID>ELECTRICAL_#INTERACTION_TYPE#_Procedure</NODE_ID> <ANIM_NAME>ELECTRICAL_#INTERACTION_TYPE#_Procedure</ANIM_NAME> <PROC_ID>1</PROC_ID> <IE_PROC_ID>Procedure_#ID#</IE_PROC_ID> <Switch Param="INTERACTION_TYPE"> <Case Value="Switch"> <ANIM_CODE>#IS_ON# 100 *</ANIM_CODE> </Case> </Switch> <TOOLTIP_TITLE>@TT_OverrideMe_Title</TOOLTIP_TITLE> <TT_DESCRIPTION_ID>@TT_OverrideMe_Description</TT_DESCRIPTION_ID> </Parameters> <Parameters Type="Override"> <TOOLTIP_ENTRY_0>ELECTRICAL_#IE_PROC_ID#</TOOLTIP_ENTRY_0> <LEFT_SINGLE_CODE>(>B:ELECTRICAL_#IE_PROC_ID#_Toggle)</LEFT_SINGLE_CODE> </Parameters> <Component ID="#NODE_ID#_#ID#" Node="#NODE_ID#"> <UseInputEvent ID="ELECTRICAL"> <BTN_ID>#IE_PROC_ID#</BTN_ID> <SET_STATE_ON>0 #PROC_ID# (>K:2:ELECTRICAL_EXECUTE_PROCEDURE)</SET_STATE_ON> <SET_STATE_OFF>1 #PROC_ID# (>K:2:ELECTRICAL_EXECUTE_PROCEDURE)</SET_STATE_OFF> <GET_STATE_EXTERNAL>#IS_ON# sp0</GET_STATE_EXTERNAL> <SIM_STATE_IS_ON_EXTERNAL>l0</SIM_STATE_IS_ON_EXTERNAL> </UseInputEvent> <Switch Param="INTERACTION_TYPE"> <Case Value="Switch"> <UseTemplate Name="ASOBO_GT_Switch_Code"/> </Case> <Case Value="Push"> <UseTemplate Name="ASOBO_GT_Push_Button"/> </Case> </Switch> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID (using INTERACTION_TYPE)
- ANIM_NAME (using INTERACTION_TYPE)
- PROC_ID
- IE_PROC_ID (using ID)
- TOOLTIP_TITLE
- TT_DESCRIPTION_ID
Condition: Switch(INTERACTION_TYPE)
-
Case: Switch
Parameters set:
- ANIM_CODE (using IS_ON)
-
Override
Parameters set:
- TOOLTIP_ENTRY_0 (using IE_PROC_ID)
- LEFT_SINGLE_CODE (using IE_PROC_ID)
Parameters read:
- NODE_ID
- ID
Components:
-
#NODE_ID#_#ID# (Node: #NODE_ID#)
Parameters set:
- BTN_ID (using IE_PROC_ID)
- SET_STATE_ON (using PROC_ID)
- SET_STATE_OFF (using PROC_ID)
- GET_STATE_EXTERNAL (using IS_ON)
- SIM_STATE_IS_ON_EXTERNAL
Condition: Switch(INTERACTION_TYPE)
-
Case: Switch
Templates used:
-
Case: Push
Templates used:
-
Default