[Go back to index]

Asobo\Common\Electrical.xml

Source XML
<ModelBehaviors> <Include RelativeFile="Subtemplates\\Electrical_Subtemplates.xml"/> <Include RelativeFile="Inputs\\Electrical_Inputs.xml"/> <!-- ################################# ELECTRICAL ################################# --> <!-- ############################################################################## --> <Template Name="ASOBO_ELECTRICAL_Battery_Template"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Battery_SubTemplate"/> </Template> <Template Name="ASOBO_ELECTRICAL_Switch_Battery_Master_Template"> <UseTemplate Name="ASOBO_ELECTRICAL_Battery_Template"> <INTERACTION_TYPE>Switch</INTERACTION_TYPE> </UseTemplate> </Template> <Template Name="ASOBO_ELECTRICAL_Avionics_Master_Template"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Avionics_Master_SubTemplate"/> </Template> <Template Name="ASOBO_ELECTRICAL_Switch_Avionics_Master_Template"> <UseTemplate Name="ASOBO_ELECTRICAL_Avionics_Master_Template"> <INTERACTION_TYPE>Switch</INTERACTION_TYPE> </UseTemplate> </Template> <Template Name="ASOBO_ELECTRICAL_Avionics_Bus_Template"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Avionics_Bus_SubTemplate"/> </Template> <Template Name="ASOBO_ELECTRICAL_Switch_Avionics_Bus_Template"> <UseTemplate Name="ASOBO_ELECTRICAL_Avionics_Bus_Template"> <INTERACTION_TYPE>Switch</INTERACTION_TYPE> </UseTemplate> </Template> <Template Name="ASOBO_ELECTRICAL_Switch_Swap_Bus_Template"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <Parameters Type="Default"> <NODE_ID>ELECTRICAL_Switch_Swap_Bus_#ID#</NODE_ID> <IE_NAME>ELECTRICAL_Switch_Swap_Bus_#ID#</IE_NAME> </Parameters> <Parameters Type="Default"> <ANIM_NAME>#NODE_ID#</ANIM_NAME> </Parameters> <Parameters Type="Override"> <ENABLE_BUS_1>#SOURCE_BUS_ID_1# (A:1:BUS CONNECTION ON:#TARGET_BUS_ID_1#, Bool) ! if{ #SOURCE_BUS_ID_1# #TARGET_BUS_ID_1# (&gt;K:2:ELECTRICAL_BUS_TO_BUS_CONNECTION_TOGGLE) }</ENABLE_BUS_1> <DISABLE_BUS_1>#SOURCE_BUS_ID_1# (A:1:BUS CONNECTION ON:#TARGET_BUS_ID_1#, Bool) if{ #SOURCE_BUS_ID_1# #TARGET_BUS_ID_1# (&gt;K:2:ELECTRICAL_BUS_TO_BUS_CONNECTION_TOGGLE) }</DISABLE_BUS_1> <ENABLE_BUS_2>#SOURCE_BUS_ID_2# (A:1:BUS CONNECTION ON:#TARGET_BUS_ID_2#, Bool) ! if{ #SOURCE_BUS_ID_2# #TARGET_BUS_ID_2# (&gt;K:2:ELECTRICAL_BUS_TO_BUS_CONNECTION_TOGGLE) }</ENABLE_BUS_2> <DISABLE_BUS_2>#SOURCE_BUS_ID_2# (A:1:BUS CONNECTION ON:#TARGET_BUS_ID_2#, Bool) if{ #SOURCE_BUS_ID_2# #TARGET_BUS_ID_2# (&gt;K:2:ELECTRICAL_BUS_TO_BUS_CONNECTION_TOGGLE) }</DISABLE_BUS_2> </Parameters> <Parameters Type="Override"> <INTERACTION_TYPE>Switch</INTERACTION_TYPE> <GET_STATE_EXTERNAL>#SOURCE_BUS_ID_2# (A:1:BUS CONNECTION ON:#TARGET_BUS_ID_2#, Bool) sp0</GET_STATE_EXTERNAL> <SET_STATE_EXTERNAL> p0 if{ #ENABLE_BUS_2# #DISABLE_BUS_1# } els{ #ENABLE_BUS_1# #DISABLE_BUS_2# } </SET_STATE_EXTERNAL> <ON_BEFORE_INIT_CODE>#ENABLE_BUS_1# #DISABLE_BUS_2#</ON_BEFORE_INIT_CODE> </Parameters> <UseTemplate Name="ASOBO_Electrical_Base_Template"> </UseTemplate> </Template> <Template Name="ASOBO_ELECTRICAL_Switch_Essential_Bus_Template"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Switch_Essential_Bus_SubTemplate"/> </Template> <Template Name="ASOBO_ELECTRICAL_Alternator_Template"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Alternator_SubTemplate"/> </Template> <Template Name="ASOBO_ELECTRICAL_Switch_Alternator_Template"> <Parameters Type="Default"> <NUM_STATES>2</NUM_STATES> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Alternator_Template"> <INTERACTION_TYPE>SWITCH</INTERACTION_TYPE> </UseTemplate> </Template> <Template Name="ASOBO_ELECTRICAL_Push_Alternator_Template"> <UseTemplate Name="ASOBO_ELECTRICAL_Alternator_Template"> <INTERACTION_TYPE>PUSH</INTERACTION_TYPE> </UseTemplate> </Template> <Template Name="ASOBO_ELECTRICAL_Engine_Bleed_Template"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Engine_Bleed_SubTemplate"/> </Template> <Template Name="ASOBO_ELECTRICAL_Push_Engine_Bleed_Template"> <UseTemplate Name="ASOBO_ELECTRICAL_Engine_Bleed_Template"> <INTERACTION_TYPE>Push</INTERACTION_TYPE> </UseTemplate> </Template> <Template Name="ASOBO_ELECTRICAL_Update_APU_Shutdown_After_Engine_Start_Template"> <Parameters Type="Default"> <ENGINE_COUNT>1</ENGINE_COUNT> <SHUTDOWN_DELAY>60</SHUTDOWN_DELAY> </Parameters> <UseTemplate Name="ASOBO_GT_Update"> <FREQUENCY>1</FREQUENCY> <UPDATE_CODE> (A:APU SWITCH, Bool) ! if{ g1 } (A:GENERAL ENG COMBUSTION:1, Bool) ! if{ g1 } #ENGINE_COUNT# 2 &gt;= if{ (A:GENERAL ENG COMBUSTION:2, Bool) ! if{ g1 } #ENGINE_COUNT# 3 &gt;= if{ (A:GENERAL ENG COMBUSTION:3, Bool) ! if{ g1 } #ENGINE_COUNT# 4 &gt;= if{ (A:GENERAL ENG COMBUSTION:4, Bool) ! if{ g1 } } } } (O:XMLVAR_APU_Shutdown_Time) 0 == if{ (E:SIMULATION TIME, seconds) #SHUTDOWN_DELAY# + (&gt;O:XMLVAR_APU_Shutdown_Time) } (O:XMLVAR_APU_Shutdown_Time) (E:SIMULATION TIME, seconds) &lt; if{ (&gt;K:APU_OFF_SWITCH) } quit :1 0 (&gt;O:XMLVAR_APU_Shutdown_Time) quit </UPDATE_CODE> </UseTemplate> </Template> <Template Name="ASOBO_ELECTRICAL_Indicator_APU_Ready_Template"> <Parameters Type="Default"> <NODE_ID>ELECTRICAL_Indicator_APU_Ready</NODE_ID> <MIN_PCT_RPM>95</MIN_PCT_RPM> </Parameters> <UseTemplate Name="ASOBO_GT_Component_Emissive_Gauge"> <EMISSIVE_CODE>(A:APU PCT RPM, Percent) #MIN_PCT_RPM# &gt;</EMISSIVE_CODE> </UseTemplate> </Template> <Template Name="ASOBO_ELECTRICAL_Switch_APU_Bleed_Template"> <UseTemplate Name="ASOBO_ELECTRICAL_Switch_APU_Bleed_SubTemplate"/> </Template> <Template Name="ASOBO_ELECTRICAL_APU_Starter_Template"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_APU_Starter_SubTemplate"/> </Template> <Template Name="ASOBO_ELECTRICAL_Push_APU_Starter_Template"> <UseTemplate Name="ASOBO_ELECTRICAL_APU_Starter_Template"> <INTERACTION_TYPE>PUSH</INTERACTION_TYPE> </UseTemplate> </Template> <Template Name="ASOBO_ELECTRICAL_Switch_APU_Starter_Template"> <Parameters Type="Default"> <NUM_STATES>3</NUM_STATES> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_APU_Starter_Template"> <INTERACTION_TYPE>SWITCH</INTERACTION_TYPE> </UseTemplate> </Template> <Template Name="ASOBO_ELECTRICAL_APU_Generator_Template"> <UseTemplate Name="ASOBO_ELECTRICAL_APU_Generator_SubTemplate"/> </Template> <Template Name="ASOBO_ELECTRICAL_Push_APU_Generator_Template"> <UseTemplate Name="ASOBO_ELECTRICAL_APU_Generator_Template"> <INTERACTION_TYPE>PUSH</INTERACTION_TYPE> </UseTemplate> </Template> <Template Name="ASOBO_ELECTRICAL_Switch_APU_Generator_Template"> <UseTemplate Name="ASOBO_ELECTRICAL_APU_Generator_Template"> <INTERACTION_TYPE>SWITCH</INTERACTION_TYPE> </UseTemplate> </Template> <Template Name="ASOBO_ELECTRICAL_Switch_Bus_Template"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Switch_Bus_SubTemplate"> </UseTemplate> </Template> <Template Name="ASOBO_ELECTRICAL_Circuit_Template"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Circuit_SubTemplate"/> </Template> <Template Name="ASOBO_ELECTRICAL_Switch_Circuit_Template"> <UseTemplate Name="ASOBO_ELECTRICAL_Circuit_Template"> <INTERACTION_TYPE>Switch</INTERACTION_TYPE> </UseTemplate> </Template> <Template Name="ASOBO_ELECTRICAL_Push_Circuit_Template"> <UseTemplate Name="ASOBO_ELECTRICAL_Circuit_Template"> <INTERACTION_TYPE>Push</INTERACTION_TYPE> </UseTemplate> </Template> <Template Name="ASOBO_ELECTRICAL_Emissive_Battery_Discharge_Template"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Emissive_Battery_Discharge_SubTemplate"> </UseTemplate> </Template> <Template Name="ASOBO_ELECTRICAL_Push_BatteryCharge_Template"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Push_BatteryCharge_SubTemplate"> </UseTemplate> </Template> <Template Name="ASOBO_ELECTRICAL_Switch_Starter_Template"> <Parameters Type="Default"> <ID>1</ID> <INTERACTION_TYPE>SWITCH</INTERACTION_TYPE> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Starter_Template"> </UseTemplate> </Template> <Template Name="ASOBO_ELECTRICAL_Push_Starter_Template"> <Parameters Type="Default"> <ID>1</ID> <INTERACTION_TYPE>PUSH</INTERACTION_TYPE> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Starter_Template"> </UseTemplate> </Template> <Template Name="ASOBO_ELECTRICAL_Knob_Master_Template"> <Parameters Type="Default"> <ID>1</ID> <SWITCH_TYPE>OFF_ON_START</SWITCH_TYPE> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Knob_Master_SubTemplate"/> </Template> <Template Name="ASOBO_ELECTRICAL_Switch_Battery_STBY_Template"> <Parameters Type="Default"> <ID>1</ID> <WWISE_EVENT>switch_battery</WWISE_EVENT> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Switch_Battery_STBY_SubTemplate"> </UseTemplate> </Template> <Template Name="ASOBO_ELECTRICAL_Switch_Alternator_STBY_Template"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Switch_Alternator_STBY_SubTemplate"/> </Template> <Template Name="ASOBO_ELECTRICAL_Switch_Avionics_STBY_Power_Template"> <Parameters Type="Default"> <ANIM_NAME>ELECTRICAL_Switch_Avionics_STBY_Power</ANIM_NAME> <NODE_ID>ELECTRICAL_Switch_Avionics_STBY_Power</NODE_ID> <PART_ID>ELECTRICAL_Switch_Avionics_STBY_Power</PART_ID> <COVER_NODE_ID>ELECTRICAL_Switch_Avionics_STBY_Power_Cover</COVER_NODE_ID> <COVER_ANIM_NAME>ELECTRICAL_Switch_Avionics_STBY_Power_Cover</COVER_ANIM_NAME> <WWISE_EVENT_1>avionics_stby_power_switch_on</WWISE_EVENT_1> <WWISE_EVENT_2>avionics_stby_power_switch_off</WWISE_EVENT_2> <BTN_ID>Avionics_STBY_Power</BTN_ID> <TT_DESCRIPTION_ID>@TT_Package.ELECTRICAL_SWITCH_AVIONICS_STANDBY_ACTION</TT_DESCRIPTION_ID> <TOOLTIP_TITLE>@TT_Package.ELECTRICAL_SWITCH_AVIONICS_STANDBY_TITLE</TOOLTIP_TITLE> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Switch_Avionics_Bus_Tie_Template"/> </Template> <Template Name="ASOBO_ELECTRICAL_Switch_Avionics_Bus_Tie_Template"> <Parameters Type="Default"> <ANIM_NAME>ELECTRICAL_Switch_Avionics_Bus_Tie</ANIM_NAME> <NODE_ID>ELECTRICAL_Switch_Avionics_Bus_Tie</NODE_ID> <PART_ID>ELECTRICAL_Switch_Avionics_Bus_Tie</PART_ID> <COVER_NODE_ID>ELECTRICAL_Switch_Avionics_Bus_Tie_Cover</COVER_NODE_ID> <COVER_ANIM_NAME>ELECTRICAL_Switch_Avionics_Bus_Tie_Cover</COVER_ANIM_NAME> <SOURCE_BUS_ID>1</SOURCE_BUS_ID> <DESTINATION_BUS>2</DESTINATION_BUS> <ANIM_LENGTH>100</ANIM_LENGTH> <WWISE_EVENT_1>avionics_bus_tie_switch_on</WWISE_EVENT_1> <WWISE_EVENT_2>avionics_bus_tie_switch_off</WWISE_EVENT_2> <BTN_ID>Avionics_Bus_Tie</BTN_ID> <TT_DESCRIPTION_ID>@TT_Package.ELECTRICAL_SWITCH_AVIONICS_BUSTIE_ACTION_SET</TT_DESCRIPTION_ID> <TOOLTIP_TITLE>@TT_Package.ELECTRICAL_SWITCH_AVIONICS_BUSTIE_TITLE</TOOLTIP_TITLE> </Parameters> <Parameters Type="Default"> <COVER_IE_NAME>#BTN_ID#_Cover</COVER_IE_NAME> <COVER_VAR_NAME>XMLVAR_ELECTRICAL_#BTN_ID#_Cover_Opened</COVER_VAR_NAME> <COVER_VAR_TYPE>I</COVER_VAR_TYPE> </Parameters> <UseTemplate Name="ASOBO_GT_Switch_Covered"> <INPUT_EVENT_ID>ELECTRICAL</INPUT_EVENT_ID> <TOOLTIP_ENTRY_0>ELECTRICAL_#BTN_ID#</TOOLTIP_ENTRY_0> <COVER_IE_ID_SOURCE>ELECTRICAL</COVER_IE_ID_SOURCE> <SWITCH_NODE_ID>#NODE_ID#</SWITCH_NODE_ID> <SWITCH_ANIM_NAME>#ANIM_NAME#</SWITCH_ANIM_NAME> <TOGGLE_STATE>(&gt;B:ELECTRICAL_#BTN_ID#_Toggle)</TOGGLE_STATE> <SWITCH_ANIM_CODE>(B:ELECTRICAL_#BTN_ID#, Bool) 100 *</SWITCH_ANIM_CODE> <SET_STATE_EXTERNAL> #SOURCE_BUS_ID# (A:1:BUS CONNECTION ON:#DESTINATION_BUS#, Bool) p0 != if{ #DESTINATION_BUS# #SOURCE_BUS_ID# (&gt;K:2:ELECTRICAL_BUS_TO_BUS_CONNECTION_TOGGLE) } </SET_STATE_EXTERNAL> <GET_STATE_EXTERNAL>#SOURCE_BUS_ID# (A:1:BUS CONNECTION ON:#DESTINATION_BUS#, Bool) sp0</GET_STATE_EXTERNAL> <SIM_STATE_IS_ON_EXTERNAL>l0</SIM_STATE_IS_ON_EXTERNAL> </UseTemplate> </Template> <Template Name="ASOBO_ELECTRICAL_Switch_ExternalPower_Template"> <Parameters Type="Default"> <ID>1</ID> <NUM_STATES>2</NUM_STATES> <INTERACTION_TYPE>SWITCH</INTERACTION_TYPE> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_ExternalPower_Template"> </UseTemplate> </Template> <Template Name="ASOBO_ELECTRICAL_Push_ExternalPower_Template"> <Parameters Type="Default"> <ID>1</ID> <INTERACTION_TYPE>PUSH</INTERACTION_TYPE> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_ExternalPower_Template"> </UseTemplate> </Template> <Template Name="ASOBO_ELECTRICAL_Switch_Connection_Template"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <Parameters Type="Default"> <NODE_ID>ELECTRICAL_Switch_Connection</NODE_ID> <ANIM_NAME>ELECTRICAL_Switch_Connection</ANIM_NAME> <SOURCE_BUS_ID>1</SOURCE_BUS_ID> <DESTINATION_BUS>2</DESTINATION_BUS> <ANIM_LENGTH>100</ANIM_LENGTH> <TOGGLE_CODE/> <WWISE_EVENT_1>electrical_switch_on</WWISE_EVENT_1> <NORMALIZED_TIME_1>0.1</NORMALIZED_TIME_1> <WWISE_EVENT_2>electrical_switch_off</WWISE_EVENT_2> <NORMALIZED_TIME_2>0.5</NORMALIZED_TIME_2> <ON_CONNECTION_ON/> <ON_CONNECTION_OFF/> <IS_CONNECTION_ON/> <INPUT_EVENT_ID_SOURCE>ELECTRICAL</INPUT_EVENT_ID_SOURCE> <IE_CONNECTION_ID>Connection_#ID#</IE_CONNECTION_ID> </Parameters> <Parameters Type="Override"> <SET_CONNECTION_STATE>l1 != if{ #DESTINATION_BUS# #SOURCE_BUS_ID# (&gt;K:2:ELECTRICAL_BUS_TO_BUS_CONNECTION_TOGGLE) }</SET_CONNECTION_STATE> <IS_CONNECTION_ON>#SOURCE_BUS_ID# (A:1:BUS CONNECTION ON:#DESTINATION_BUS#, Bool) #IS_CONNECTION_ON#</IS_CONNECTION_ON> </Parameters> <Parameters Type="Override"> <BTN_ID>#IE_CONNECTION_ID#</BTN_ID> <GET_STATE_EXTERNAL>#IS_CONNECTION_ON# sp1</GET_STATE_EXTERNAL> <SIM_STATE_IS_ON_EXTERNAL>l1</SIM_STATE_IS_ON_EXTERNAL> </Parameters> <Parameters Type="Override"> <SET_STATE_ON>1 #SET_CONNECTION_STATE# #ON_CONNECTION_ON#</SET_STATE_ON> <SET_STATE_OFF>0 #SET_CONNECTION_STATE# #ON_CONNECTION_OFF#</SET_STATE_OFF> <ON_BEFORE_SET_CODE>#GET_STATE_EXTERNAL# </ON_BEFORE_SET_CODE> <IS_CONNECTION_ON_EXTERNAL>(B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID#, Bool)</IS_CONNECTION_ON_EXTERNAL> <LEFT_SINGLE_CODE>(&gt;B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID#_Toggle)</LEFT_SINGLE_CODE> <TOOLTIP_ENTRY_0>#INPUT_EVENT_ID_SOURCE#_#BTN_ID#</TOOLTIP_ENTRY_0> </Parameters> <Parameters Type="Default"> <Condition Valid="IS_AIRLINER"> <SEQ1_EMISSIVE_CODE>#IS_CONNECTION_ON_EXTERNAL#</SEQ1_EMISSIVE_CODE> <SEQ2_EMISSIVE_CODE>#IS_CONNECTION_ON_EXTERNAL# !</SEQ2_EMISSIVE_CODE> </Condition> </Parameters> <Condition NotEmpty="ENSURE_VARIABLE_CONSISTENCY"> <UseTemplate Name="ASOBO_GT_Update"> <FREQUENCY>5</FREQUENCY> <UPDATE_CODE>#ENSURE_VARIABLE_CONSISTENCY#</UPDATE_CODE> </UseTemplate> </Condition> <Condition Valid="IS_AIRLINER"> <True> <UseTemplate Name="ASOBO_GT_Push_Button_Airliner"> <INPUT_EVENT_ID>ELECTRICAL</INPUT_EVENT_ID> <Condition Valid="INVERT_EMISSIVE_STATE"> <True> <SEQ1_EMISSIVE_CODE>#SEQ2_EMISSIVE_CODE#</SEQ1_EMISSIVE_CODE> <SEQ2_EMISSIVE_CODE>#SEQ1_EMISSIVE_CODE#</SEQ2_EMISSIVE_CODE> </True> </Condition> </UseTemplate> </True> <False> <Component ID="#NODE_ID#_#ID#" Node="#NODE_ID#"> <UseInputEvent ID="ELECTRICAL"> <ANIM>EXTERNAL</ANIM> </UseInputEvent> <UseTemplate Name="ASOBO_GT_Switch_Code"> <ANIM_CODE>#IS_CONNECTION_ON_EXTERNAL# #ANIM_LENGTH# *</ANIM_CODE> </UseTemplate> </Component> </False> </Condition> </Template> <Template Name="ASOBO_ELECTRICAL_Procedure_Template"> <!-- PARAM: IS_ON (code returning true when the procedure has been executed) Since it's context dependent it must be provided case by case --> <Parameters Type="Default"> <ID>1</ID> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Procedure_SubTemplate"/> </Template> <Template Name="ASOBO_ELECTRICAL_Switch_Procedure_Template"> <UseTemplate Name="ASOBO_ELECTRICAL_Procedure_Template"> <INTERACTION_TYPE>Switch</INTERACTION_TYPE> </UseTemplate> </Template> <Template Name="ASOBO_ELECTRICAL_Push_Procedure_Template"> <UseTemplate Name="ASOBO_ELECTRICAL_Procedure_Template"> <INTERACTION_TYPE>Push</INTERACTION_TYPE> </UseTemplate> </Template> <Template Name="ASOBO_ELECTRICAL_Switch_Breaker_Autopilot_Template"> <Parameters Type="Default"> <NODE_ID>ELECTRICAL_Switch_Breaker_Autopilot</NODE_ID> <ANIM_NAME>ELECTRICAL_Switch_Breaker_Autopilot</ANIM_NAME> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Switch_Breaker_Template"> <CIRCUIT_NAME>AUTOPILOT</CIRCUIT_NAME> </UseTemplate> </Template> <Template Name="ASOBO_ELECTRICAL_Switch_Breaker_AvnFan_Template"> <Parameters Type="Default"> <NODE_ID>ELECTRICAL_Switch_Breaker_AvnFan</NODE_ID> <ANIM_NAME>ELECTRICAL_Switch_Breaker_AvnFan</ANIM_NAME> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Switch_Breaker_Template"> <CIRCUIT_NAME>AVNFAN</CIRCUIT_NAME> </UseTemplate> </Template> <Template Name="ASOBO_ELECTRICAL_Switch_Breaker_GPS_Template"> <Parameters Type="Default"> <NODE_ID>ELECTRICAL_Switch_Breaker_GPS</NODE_ID> <ANIM_NAME>ELECTRICAL_Switch_Breaker_GPS</ANIM_NAME> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Switch_Breaker_Template"> <CIRCUIT_NAME>GPS</CIRCUIT_NAME> </UseTemplate> </Template> <Template Name="ASOBO_ELECTRICAL_Switch_Breaker_Avionics_Template"> <Parameters Type="Default"> <NODE_ID>ELECTRICAL_Switch_Breaker_Avionics</NODE_ID> <ANIM_NAME>ELECTRICAL_Switch_Breaker_Avionics</ANIM_NAME> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Switch_Breaker_Template"> <CIRCUIT_NAME>AVNBUS1</CIRCUIT_NAME> </UseTemplate> </Template> <Template Name="ASOBO_ELECTRICAL_Switch_Breaker_NAVCOM1_Template"> <Parameters Type="Default"> <NODE_ID>ELECTRICAL_Switch_Breaker_NAVCOM1</NODE_ID> <ANIM_NAME>ELECTRICAL_Switch_Breaker_NAVCOM1</ANIM_NAME> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Switch_Breaker_Template"> <CIRCUIT_NAME>NAVCOM1</CIRCUIT_NAME> </UseTemplate> </Template> <Template Name="ASOBO_ELECTRICAL_Switch_Breaker_NAVCOM2_Template"> <Parameters Type="Default"> <NODE_ID>ELECTRICAL_Switch_Breaker_NAVCOM2</NODE_ID> <ANIM_NAME>ELECTRICAL_Switch_Breaker_NAVCOM2</ANIM_NAME> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Switch_Breaker_Template"> <CIRCUIT_NAME>NAVCOM2</CIRCUIT_NAME> </UseTemplate> </Template> <Template Name="ASOBO_ELECTRICAL_Switch_Breaker_NAVCOM3_Template"> <Parameters Type="Default"> <NODE_ID>ELECTRICAL_Switch_Breaker_NAVCOM3</NODE_ID> <ANIM_NAME>ELECTRICAL_Switch_Breaker_NAVCOM3</ANIM_NAME> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Switch_Breaker_Template"> <CIRCUIT_NAME>NAVCOM3</CIRCUIT_NAME> </UseTemplate> </Template> <Template Name="ASOBO_ELECTRICAL_Switch_Breaker_ADF_Template"> <Parameters Type="Default"> <NODE_ID>ELECTRICAL_Switch_Breaker_ADF</NODE_ID> <ANIM_NAME>ELECTRICAL_Switch_Breaker_ADF</ANIM_NAME> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Switch_Breaker_Template"> <CIRCUIT_NAME>ADF</CIRCUIT_NAME> </UseTemplate> </Template> <Template Name="ASOBO_ELECTRICAL_Switch_Breaker_XPNDR_Template"> <Parameters Type="Default"> <NODE_ID>ELECTRICAL_Switch_Breaker_XPNDR</NODE_ID> <ANIM_NAME>ELECTRICAL_Switch_Breaker_XPNDR</ANIM_NAME> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Switch_Breaker_Template"> <CIRCUIT_NAME>XPNDR</CIRCUIT_NAME> </UseTemplate> </Template> <Template Name="ASOBO_ELECTRICAL_Switch_Breaker_FLAP_Template"> <Parameters Type="Default"> <NODE_ID>ELECTRICAL_Switch_Breaker_FLAP</NODE_ID> <ANIM_NAME>ELECTRICAL_Switch_Breaker_FLAP</ANIM_NAME> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Switch_Breaker_Template"> <CIRCUIT_NAME>FLAP</CIRCUIT_NAME> </UseTemplate> </Template> <Template Name="ASOBO_ELECTRICAL_Switch_Breaker_AVNBUS1_Template"> <Parameters Type="Default"> <NODE_ID>ELECTRICAL_Switch_Breaker_AVNBUS1</NODE_ID> <ANIM_NAME>ELECTRICAL_Switch_Breaker_AVNBUS1</ANIM_NAME> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Switch_Breaker_Template"> <CIRCUIT_NAME>AVNBUS1</CIRCUIT_NAME> </UseTemplate> </Template> <Template Name="ASOBO_ELECTRICAL_Switch_Breaker_AVNBUS2_Template"> <Parameters Type="Default"> <NODE_ID>ELECTRICAL_Switch_Breaker_AVNBUS2</NODE_ID> <ANIM_NAME>ELECTRICAL_Switch_Breaker_AVNBUS2</ANIM_NAME> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Switch_Breaker_Template"> <CIRCUIT_NAME>AVNBUS2</CIRCUIT_NAME> </UseTemplate> </Template> <Template Name="ASOBO_ELECTRICAL_Switch_Breaker_LTSPWR_Template"> <Parameters Type="Default"> <NODE_ID>ELECTRICAL_Switch_Breaker_LTSPWR</NODE_ID> <ANIM_NAME>ELECTRICAL_Switch_Breaker_LTSPWR</ANIM_NAME> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Switch_Breaker_Template"> <CIRCUIT_NAME>LTSPWR</CIRCUIT_NAME> </UseTemplate> </Template> <Template Name="ASOBO_ELECTRICAL_Switch_Breaker_ALTFLD_Template"> <Parameters Type="Default"> <NODE_ID>ELECTRICAL_Switch_Breaker_ALTFLD</NODE_ID> <ANIM_NAME>ELECTRICAL_Switch_Breaker_ALTFLD</ANIM_NAME> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Switch_Breaker_Template"> <CIRCUIT_NAME>ALTFLD</CIRCUIT_NAME> </UseTemplate> </Template> <Template Name="ASOBO_ELECTRICAL_Emissive_Bus_Template"> <Parameters Type="Default"> <BUS_INDEX>-1</BUS_INDEX> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Emissive_Bus_SubTemplate"> </UseTemplate> </Template> <!-- ############################################ --> <!-- ELECTRICAL Interaction inputs setup template --> <Template Name="ASOBO_ELECTRICAL_Base_Template"> <Parameters Type="Default"> <INPUT_EVENT_ID_SOURCE>ELECTRICAL</INPUT_EVENT_ID_SOURCE> <WWISE_PREFIX>ELECTRICAL</WWISE_PREFIX> </Parameters> <UseTemplate Name="ASOBO_Interaction_Base_Template"> <USE_INPUT_EVENT_ID>ELECTRICAL</USE_INPUT_EVENT_ID> </UseTemplate> </Template> <Template Name="ASOBO_ELECTRICAL_Push_Event_Base_Template"> <UseTemplate Name="ASOBO_Interaction_Push_Event_Base_Template"> <USE_INPUT_EVENT_ID>ELECTRICAL</USE_INPUT_EVENT_ID> </UseTemplate> </Template> <Template Name="ASOBO_ELECTRICAL_Pull_Event_Base_Template"> <UseTemplate Name="ASOBO_Interaction_Pull_Event_Base_Template"> <USE_INPUT_EVENT_ID>ELECTRICAL</USE_INPUT_EVENT_ID> </UseTemplate> </Template> </ModelBehaviors>

Includes

Templates

Template list
  1. ASOBO_ELECTRICAL_Battery_Template
  2. ASOBO_ELECTRICAL_Switch_Battery_Master_Template
  3. ASOBO_ELECTRICAL_Avionics_Master_Template
  4. ASOBO_ELECTRICAL_Switch_Avionics_Master_Template
  5. ASOBO_ELECTRICAL_Avionics_Bus_Template
  6. ASOBO_ELECTRICAL_Switch_Avionics_Bus_Template
  7. ASOBO_ELECTRICAL_Switch_Swap_Bus_Template
  8. ASOBO_ELECTRICAL_Switch_Essential_Bus_Template
  9. ASOBO_ELECTRICAL_Alternator_Template
  10. ASOBO_ELECTRICAL_Switch_Alternator_Template
  11. ASOBO_ELECTRICAL_Push_Alternator_Template
  12. ASOBO_ELECTRICAL_Engine_Bleed_Template
  13. ASOBO_ELECTRICAL_Push_Engine_Bleed_Template
  14. ASOBO_ELECTRICAL_Update_APU_Shutdown_After_Engine_Start_Template
  15. ASOBO_ELECTRICAL_Indicator_APU_Ready_Template
  16. ASOBO_ELECTRICAL_Switch_APU_Bleed_Template
  17. ASOBO_ELECTRICAL_APU_Starter_Template
  18. ASOBO_ELECTRICAL_Push_APU_Starter_Template
  19. ASOBO_ELECTRICAL_Switch_APU_Starter_Template
  20. ASOBO_ELECTRICAL_APU_Generator_Template
  21. ASOBO_ELECTRICAL_Push_APU_Generator_Template
  22. ASOBO_ELECTRICAL_Switch_APU_Generator_Template
  23. ASOBO_ELECTRICAL_Switch_Bus_Template
  24. ASOBO_ELECTRICAL_Circuit_Template
  25. ASOBO_ELECTRICAL_Switch_Circuit_Template
  26. ASOBO_ELECTRICAL_Push_Circuit_Template
  27. ASOBO_ELECTRICAL_Emissive_Battery_Discharge_Template
  28. ASOBO_ELECTRICAL_Push_BatteryCharge_Template
  29. ASOBO_ELECTRICAL_Switch_Starter_Template
  30. ASOBO_ELECTRICAL_Push_Starter_Template
  31. ASOBO_ELECTRICAL_Knob_Master_Template
  32. ASOBO_ELECTRICAL_Switch_Battery_STBY_Template
  33. ASOBO_ELECTRICAL_Switch_Alternator_STBY_Template
  34. ASOBO_ELECTRICAL_Switch_Avionics_STBY_Power_Template
  35. ASOBO_ELECTRICAL_Switch_Avionics_Bus_Tie_Template
  36. ASOBO_ELECTRICAL_Switch_ExternalPower_Template
  37. ASOBO_ELECTRICAL_Push_ExternalPower_Template
  38. ASOBO_ELECTRICAL_Switch_Connection_Template
  39. ASOBO_ELECTRICAL_Procedure_Template
  40. ASOBO_ELECTRICAL_Switch_Procedure_Template
  41. ASOBO_ELECTRICAL_Push_Procedure_Template
  42. ASOBO_ELECTRICAL_Switch_Breaker_Autopilot_Template
  43. ASOBO_ELECTRICAL_Switch_Breaker_AvnFan_Template
  44. ASOBO_ELECTRICAL_Switch_Breaker_GPS_Template
  45. ASOBO_ELECTRICAL_Switch_Breaker_Avionics_Template
  46. ASOBO_ELECTRICAL_Switch_Breaker_NAVCOM1_Template
  47. ASOBO_ELECTRICAL_Switch_Breaker_NAVCOM2_Template
  48. ASOBO_ELECTRICAL_Switch_Breaker_NAVCOM3_Template
  49. ASOBO_ELECTRICAL_Switch_Breaker_ADF_Template
  50. ASOBO_ELECTRICAL_Switch_Breaker_XPNDR_Template
  51. ASOBO_ELECTRICAL_Switch_Breaker_FLAP_Template
  52. ASOBO_ELECTRICAL_Switch_Breaker_AVNBUS1_Template
  53. ASOBO_ELECTRICAL_Switch_Breaker_AVNBUS2_Template
  54. ASOBO_ELECTRICAL_Switch_Breaker_LTSPWR_Template
  55. ASOBO_ELECTRICAL_Switch_Breaker_ALTFLD_Template
  56. ASOBO_ELECTRICAL_Emissive_Bus_Template
  57. ASOBO_ELECTRICAL_Base_Template
  58. ASOBO_ELECTRICAL_Push_Event_Base_Template
  59. ASOBO_ELECTRICAL_Pull_Event_Base_Template

  • ASOBO_ELECTRICAL_Battery_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_Battery_Template"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Battery_SubTemplate"/> </Template>

    Parameters initialization:

    • Default

      Parameters set:

      • ID
    [Go back to top] [Go back to index]

  • ASOBO_ELECTRICAL_Switch_Battery_Master_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_Switch_Battery_Master_Template"> <UseTemplate Name="ASOBO_ELECTRICAL_Battery_Template"> <INTERACTION_TYPE>Switch</INTERACTION_TYPE> </UseTemplate> </Template>

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_ELECTRICAL_Avionics_Master_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_Avionics_Master_Template"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Avionics_Master_SubTemplate"/> </Template>

    Parameters initialization:

    • Default

      Parameters set:

      • ID
    [Go back to top] [Go back to index]

  • ASOBO_ELECTRICAL_Switch_Avionics_Master_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_Switch_Avionics_Master_Template"> <UseTemplate Name="ASOBO_ELECTRICAL_Avionics_Master_Template"> <INTERACTION_TYPE>Switch</INTERACTION_TYPE> </UseTemplate> </Template>

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_ELECTRICAL_Avionics_Bus_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_Avionics_Bus_Template"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Avionics_Bus_SubTemplate"/> </Template>

    Parameters initialization:

    • Default

      Parameters set:

      • ID
    [Go back to top] [Go back to index]

  • ASOBO_ELECTRICAL_Switch_Avionics_Bus_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_Switch_Avionics_Bus_Template"> <UseTemplate Name="ASOBO_ELECTRICAL_Avionics_Bus_Template"> <INTERACTION_TYPE>Switch</INTERACTION_TYPE> </UseTemplate> </Template>

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_ELECTRICAL_Switch_Swap_Bus_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_Switch_Swap_Bus_Template"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <Parameters Type="Default"> <NODE_ID>ELECTRICAL_Switch_Swap_Bus_#ID#</NODE_ID> <IE_NAME>ELECTRICAL_Switch_Swap_Bus_#ID#</IE_NAME> </Parameters> <Parameters Type="Default"> <ANIM_NAME>#NODE_ID#</ANIM_NAME> </Parameters> <Parameters Type="Override"> <ENABLE_BUS_1>#SOURCE_BUS_ID_1# (A:1:BUS CONNECTION ON:#TARGET_BUS_ID_1#, Bool) ! if{ #SOURCE_BUS_ID_1# #TARGET_BUS_ID_1# (&gt;K:2:ELECTRICAL_BUS_TO_BUS_CONNECTION_TOGGLE) }</ENABLE_BUS_1> <DISABLE_BUS_1>#SOURCE_BUS_ID_1# (A:1:BUS CONNECTION ON:#TARGET_BUS_ID_1#, Bool) if{ #SOURCE_BUS_ID_1# #TARGET_BUS_ID_1# (&gt;K:2:ELECTRICAL_BUS_TO_BUS_CONNECTION_TOGGLE) }</DISABLE_BUS_1> <ENABLE_BUS_2>#SOURCE_BUS_ID_2# (A:1:BUS CONNECTION ON:#TARGET_BUS_ID_2#, Bool) ! if{ #SOURCE_BUS_ID_2# #TARGET_BUS_ID_2# (&gt;K:2:ELECTRICAL_BUS_TO_BUS_CONNECTION_TOGGLE) }</ENABLE_BUS_2> <DISABLE_BUS_2>#SOURCE_BUS_ID_2# (A:1:BUS CONNECTION ON:#TARGET_BUS_ID_2#, Bool) if{ #SOURCE_BUS_ID_2# #TARGET_BUS_ID_2# (&gt;K:2:ELECTRICAL_BUS_TO_BUS_CONNECTION_TOGGLE) }</DISABLE_BUS_2> </Parameters> <Parameters Type="Override"> <INTERACTION_TYPE>Switch</INTERACTION_TYPE> <GET_STATE_EXTERNAL>#SOURCE_BUS_ID_2# (A:1:BUS CONNECTION ON:#TARGET_BUS_ID_2#, Bool) sp0</GET_STATE_EXTERNAL> <SET_STATE_EXTERNAL> p0 if{ #ENABLE_BUS_2# #DISABLE_BUS_1# } els{ #ENABLE_BUS_1# #DISABLE_BUS_2# } </SET_STATE_EXTERNAL> <ON_BEFORE_INIT_CODE>#ENABLE_BUS_1# #DISABLE_BUS_2#</ON_BEFORE_INIT_CODE> </Parameters> <UseTemplate Name="ASOBO_Electrical_Base_Template"/> </Template>

    Parameters initialization:

    • Default

      Parameters set:

      • ID
    • Default

      Parameters set:

      • NODE_ID (using ID)
      • IE_NAME (using ID)
    • Default

      Parameters set:

      • ANIM_NAME (using NODE_ID)
    • Override

      Parameters set:

      • ENABLE_BUS_1 (using SOURCE_BUS_ID_1, TARGET_BUS_ID_1)
      • DISABLE_BUS_1 (using SOURCE_BUS_ID_1, TARGET_BUS_ID_1)
      • ENABLE_BUS_2 (using SOURCE_BUS_ID_2, TARGET_BUS_ID_2)
      • DISABLE_BUS_2 (using SOURCE_BUS_ID_2, TARGET_BUS_ID_2)
    • Override

      Parameters set:

      • INTERACTION_TYPE
      • GET_STATE_EXTERNAL (using SOURCE_BUS_ID_2, TARGET_BUS_ID_2)
      • SET_STATE_EXTERNAL (using ENABLE_BUS_2, DISABLE_BUS_1, ENABLE_BUS_1, DISABLE_BUS_2)
      • ON_BEFORE_INIT_CODE (using ENABLE_BUS_1, DISABLE_BUS_2)
    [Go back to top] [Go back to index]

  • ASOBO_ELECTRICAL_Switch_Essential_Bus_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_Switch_Essential_Bus_Template"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Switch_Essential_Bus_SubTemplate"/> </Template>

    Parameters initialization:

    • Default

      Parameters set:

      • ID
    [Go back to top] [Go back to index]

  • ASOBO_ELECTRICAL_Alternator_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_Alternator_Template"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Alternator_SubTemplate"/> </Template>

    Parameters initialization:

    • Default

      Parameters set:

      • ID
    [Go back to top] [Go back to index]

  • ASOBO_ELECTRICAL_Switch_Alternator_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_Switch_Alternator_Template"> <Parameters Type="Default"> <NUM_STATES>2</NUM_STATES> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Alternator_Template"> <INTERACTION_TYPE>SWITCH</INTERACTION_TYPE> </UseTemplate> </Template>

    Parameters initialization:

    • Default

      Parameters set:

      • NUM_STATES

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_ELECTRICAL_Push_Alternator_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_Push_Alternator_Template"> <UseTemplate Name="ASOBO_ELECTRICAL_Alternator_Template"> <INTERACTION_TYPE>PUSH</INTERACTION_TYPE> </UseTemplate> </Template>

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_ELECTRICAL_Engine_Bleed_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_Engine_Bleed_Template"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Engine_Bleed_SubTemplate"/> </Template>

    Parameters initialization:

    • Default

      Parameters set:

      • ID
    [Go back to top] [Go back to index]

  • ASOBO_ELECTRICAL_Push_Engine_Bleed_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_Push_Engine_Bleed_Template"> <UseTemplate Name="ASOBO_ELECTRICAL_Engine_Bleed_Template"> <INTERACTION_TYPE>Push</INTERACTION_TYPE> </UseTemplate> </Template>

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_ELECTRICAL_Update_APU_Shutdown_After_Engine_Start_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_Update_APU_Shutdown_After_Engine_Start_Template"> <Parameters Type="Default"> <ENGINE_COUNT>1</ENGINE_COUNT> <SHUTDOWN_DELAY>60</SHUTDOWN_DELAY> </Parameters> <UseTemplate Name="ASOBO_GT_Update"> <FREQUENCY>1</FREQUENCY> <UPDATE_CODE> (A:APU SWITCH, Bool) ! if{ g1 } (A:GENERAL ENG COMBUSTION:1, Bool) ! if{ g1 } #ENGINE_COUNT# 2 &gt;= if{ (A:GENERAL ENG COMBUSTION:2, Bool) ! if{ g1 } #ENGINE_COUNT# 3 &gt;= if{ (A:GENERAL ENG COMBUSTION:3, Bool) ! if{ g1 } #ENGINE_COUNT# 4 &gt;= if{ (A:GENERAL ENG COMBUSTION:4, Bool) ! if{ g1 } } } } (O:XMLVAR_APU_Shutdown_Time) 0 == if{ (E:SIMULATION TIME, seconds) #SHUTDOWN_DELAY# + (&gt;O:XMLVAR_APU_Shutdown_Time) } (O:XMLVAR_APU_Shutdown_Time) (E:SIMULATION TIME, seconds) &lt; if{ (&gt;K:APU_OFF_SWITCH) } quit :1 0 (&gt;O:XMLVAR_APU_Shutdown_Time) quit </UPDATE_CODE> </UseTemplate> </Template>

    Parameters initialization:

    • Default

      Parameters set:

      • ENGINE_COUNT
      • SHUTDOWN_DELAY

    Templates used:

    • ASOBO_GT_Update

      Parameters set:

      • FREQUENCY
      • UPDATE_CODE (using ENGINE_COUNT, SHUTDOWN_DELAY)
    [Go back to top] [Go back to index]

  • ASOBO_ELECTRICAL_Indicator_APU_Ready_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_Indicator_APU_Ready_Template"> <Parameters Type="Default"> <NODE_ID>ELECTRICAL_Indicator_APU_Ready</NODE_ID> <MIN_PCT_RPM>95</MIN_PCT_RPM> </Parameters> <UseTemplate Name="ASOBO_GT_Component_Emissive_Gauge"> <EMISSIVE_CODE>(A:APU PCT RPM, Percent) #MIN_PCT_RPM# &gt;</EMISSIVE_CODE> </UseTemplate> </Template>

    Parameters initialization:

    • Default

      Parameters set:

      • NODE_ID
      • MIN_PCT_RPM

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_ELECTRICAL_Switch_APU_Bleed_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_Switch_APU_Bleed_Template"> <UseTemplate Name="ASOBO_ELECTRICAL_Switch_APU_Bleed_SubTemplate"/> </Template>
    [Go back to top] [Go back to index]

  • ASOBO_ELECTRICAL_APU_Starter_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_APU_Starter_Template"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_APU_Starter_SubTemplate"/> </Template>

    Parameters initialization:

    • Default

      Parameters set:

      • ID
    [Go back to top] [Go back to index]

  • ASOBO_ELECTRICAL_Push_APU_Starter_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_Push_APU_Starter_Template"> <UseTemplate Name="ASOBO_ELECTRICAL_APU_Starter_Template"> <INTERACTION_TYPE>PUSH</INTERACTION_TYPE> </UseTemplate> </Template>

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_ELECTRICAL_Switch_APU_Starter_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_Switch_APU_Starter_Template"> <Parameters Type="Default"> <NUM_STATES>3</NUM_STATES> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_APU_Starter_Template"> <INTERACTION_TYPE>SWITCH</INTERACTION_TYPE> </UseTemplate> </Template>

    Parameters initialization:

    • Default

      Parameters set:

      • NUM_STATES

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_ELECTRICAL_APU_Generator_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_APU_Generator_Template"> <UseTemplate Name="ASOBO_ELECTRICAL_APU_Generator_SubTemplate"/> </Template>
    [Go back to top] [Go back to index]

  • ASOBO_ELECTRICAL_Push_APU_Generator_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_Push_APU_Generator_Template"> <UseTemplate Name="ASOBO_ELECTRICAL_APU_Generator_Template"> <INTERACTION_TYPE>PUSH</INTERACTION_TYPE> </UseTemplate> </Template>

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_ELECTRICAL_Switch_APU_Generator_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_Switch_APU_Generator_Template"> <UseTemplate Name="ASOBO_ELECTRICAL_APU_Generator_Template"> <INTERACTION_TYPE>SWITCH</INTERACTION_TYPE> </UseTemplate> </Template>

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_ELECTRICAL_Switch_Bus_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_Switch_Bus_Template"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Switch_Bus_SubTemplate"/> </Template>

    Parameters initialization:

    • Default

      Parameters set:

      • ID
    [Go back to top] [Go back to index]

  • ASOBO_ELECTRICAL_Circuit_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_Circuit_Template"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Circuit_SubTemplate"/> </Template>

    Parameters initialization:

    • Default

      Parameters set:

      • ID
    [Go back to top] [Go back to index]

  • ASOBO_ELECTRICAL_Switch_Circuit_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_Switch_Circuit_Template"> <UseTemplate Name="ASOBO_ELECTRICAL_Circuit_Template"> <INTERACTION_TYPE>Switch</INTERACTION_TYPE> </UseTemplate> </Template>

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_ELECTRICAL_Push_Circuit_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_Push_Circuit_Template"> <UseTemplate Name="ASOBO_ELECTRICAL_Circuit_Template"> <INTERACTION_TYPE>Push</INTERACTION_TYPE> </UseTemplate> </Template>

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_ELECTRICAL_Emissive_Battery_Discharge_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_Emissive_Battery_Discharge_Template"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Emissive_Battery_Discharge_SubTemplate"/> </Template>

    Parameters initialization:

    • Default

      Parameters set:

      • ID
    [Go back to top] [Go back to index]

  • ASOBO_ELECTRICAL_Push_BatteryCharge_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_Push_BatteryCharge_Template"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Push_BatteryCharge_SubTemplate"/> </Template>

    Parameters initialization:

    • Default

      Parameters set:

      • ID
    [Go back to top] [Go back to index]

  • ASOBO_ELECTRICAL_Switch_Starter_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_Switch_Starter_Template"> <Parameters Type="Default"> <ID>1</ID> <INTERACTION_TYPE>SWITCH</INTERACTION_TYPE> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Starter_Template"/> </Template>

    Parameters initialization:

    • Default

      Parameters set:

      • ID
      • INTERACTION_TYPE
    [Go back to top] [Go back to index]

  • ASOBO_ELECTRICAL_Push_Starter_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_Push_Starter_Template"> <Parameters Type="Default"> <ID>1</ID> <INTERACTION_TYPE>PUSH</INTERACTION_TYPE> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Starter_Template"/> </Template>

    Parameters initialization:

    • Default

      Parameters set:

      • ID
      • INTERACTION_TYPE
    [Go back to top] [Go back to index]

  • ASOBO_ELECTRICAL_Knob_Master_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_Knob_Master_Template"> <Parameters Type="Default"> <ID>1</ID> <SWITCH_TYPE>OFF_ON_START</SWITCH_TYPE> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Knob_Master_SubTemplate"/> </Template>

    Parameters initialization:

    • Default

      Parameters set:

      • ID
      • SWITCH_TYPE
    [Go back to top] [Go back to index]

  • ASOBO_ELECTRICAL_Switch_Battery_STBY_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_Switch_Battery_STBY_Template"> <Parameters Type="Default"> <ID>1</ID> <WWISE_EVENT>switch_battery</WWISE_EVENT> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Switch_Battery_STBY_SubTemplate"/> </Template>

    Parameters initialization:

    • Default

      Parameters set:

      • ID
      • WWISE_EVENT
    [Go back to top] [Go back to index]

  • ASOBO_ELECTRICAL_Switch_Alternator_STBY_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_Switch_Alternator_STBY_Template"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Switch_Alternator_STBY_SubTemplate"/> </Template>

    Parameters initialization:

    • Default

      Parameters set:

      • ID
    [Go back to top] [Go back to index]

  • ASOBO_ELECTRICAL_Switch_Avionics_STBY_Power_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_Switch_Avionics_STBY_Power_Template"> <Parameters Type="Default"> <ANIM_NAME>ELECTRICAL_Switch_Avionics_STBY_Power</ANIM_NAME> <NODE_ID>ELECTRICAL_Switch_Avionics_STBY_Power</NODE_ID> <PART_ID>ELECTRICAL_Switch_Avionics_STBY_Power</PART_ID> <COVER_NODE_ID>ELECTRICAL_Switch_Avionics_STBY_Power_Cover</COVER_NODE_ID> <COVER_ANIM_NAME>ELECTRICAL_Switch_Avionics_STBY_Power_Cover</COVER_ANIM_NAME> <WWISE_EVENT_1>avionics_stby_power_switch_on</WWISE_EVENT_1> <WWISE_EVENT_2>avionics_stby_power_switch_off</WWISE_EVENT_2> <BTN_ID>Avionics_STBY_Power</BTN_ID> <TT_DESCRIPTION_ID>@TT_Package.ELECTRICAL_SWITCH_AVIONICS_STANDBY_ACTION</TT_DESCRIPTION_ID> <TOOLTIP_TITLE>@TT_Package.ELECTRICAL_SWITCH_AVIONICS_STANDBY_TITLE</TOOLTIP_TITLE> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Switch_Avionics_Bus_Tie_Template"/> </Template>

    Parameters initialization:

    • Default

      Parameters set:

      • ANIM_NAME
      • NODE_ID
      • PART_ID
      • COVER_NODE_ID
      • COVER_ANIM_NAME
      • WWISE_EVENT_1
      • WWISE_EVENT_2
      • BTN_ID
      • TT_DESCRIPTION_ID
      • TOOLTIP_TITLE
    [Go back to top] [Go back to index]

  • ASOBO_ELECTRICAL_Switch_Avionics_Bus_Tie_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_Switch_Avionics_Bus_Tie_Template"> <Parameters Type="Default"> <ANIM_NAME>ELECTRICAL_Switch_Avionics_Bus_Tie</ANIM_NAME> <NODE_ID>ELECTRICAL_Switch_Avionics_Bus_Tie</NODE_ID> <PART_ID>ELECTRICAL_Switch_Avionics_Bus_Tie</PART_ID> <COVER_NODE_ID>ELECTRICAL_Switch_Avionics_Bus_Tie_Cover</COVER_NODE_ID> <COVER_ANIM_NAME>ELECTRICAL_Switch_Avionics_Bus_Tie_Cover</COVER_ANIM_NAME> <SOURCE_BUS_ID>1</SOURCE_BUS_ID> <DESTINATION_BUS>2</DESTINATION_BUS> <ANIM_LENGTH>100</ANIM_LENGTH> <WWISE_EVENT_1>avionics_bus_tie_switch_on</WWISE_EVENT_1> <WWISE_EVENT_2>avionics_bus_tie_switch_off</WWISE_EVENT_2> <BTN_ID>Avionics_Bus_Tie</BTN_ID> <TT_DESCRIPTION_ID>@TT_Package.ELECTRICAL_SWITCH_AVIONICS_BUSTIE_ACTION_SET</TT_DESCRIPTION_ID> <TOOLTIP_TITLE>@TT_Package.ELECTRICAL_SWITCH_AVIONICS_BUSTIE_TITLE</TOOLTIP_TITLE> </Parameters> <Parameters Type="Default"> <COVER_IE_NAME>#BTN_ID#_Cover</COVER_IE_NAME> <COVER_VAR_NAME>XMLVAR_ELECTRICAL_#BTN_ID#_Cover_Opened</COVER_VAR_NAME> <COVER_VAR_TYPE>I</COVER_VAR_TYPE> </Parameters> <UseTemplate Name="ASOBO_GT_Switch_Covered"> <INPUT_EVENT_ID>ELECTRICAL</INPUT_EVENT_ID> <TOOLTIP_ENTRY_0>ELECTRICAL_#BTN_ID#</TOOLTIP_ENTRY_0> <COVER_IE_ID_SOURCE>ELECTRICAL</COVER_IE_ID_SOURCE> <SWITCH_NODE_ID>#NODE_ID#</SWITCH_NODE_ID> <SWITCH_ANIM_NAME>#ANIM_NAME#</SWITCH_ANIM_NAME> <TOGGLE_STATE>(&gt;B:ELECTRICAL_#BTN_ID#_Toggle)</TOGGLE_STATE> <SWITCH_ANIM_CODE>(B:ELECTRICAL_#BTN_ID#, Bool) 100 *</SWITCH_ANIM_CODE> <SET_STATE_EXTERNAL> #SOURCE_BUS_ID# (A:1:BUS CONNECTION ON:#DESTINATION_BUS#, Bool) p0 != if{ #DESTINATION_BUS# #SOURCE_BUS_ID# (&gt;K:2:ELECTRICAL_BUS_TO_BUS_CONNECTION_TOGGLE) } </SET_STATE_EXTERNAL> <GET_STATE_EXTERNAL>#SOURCE_BUS_ID# (A:1:BUS CONNECTION ON:#DESTINATION_BUS#, Bool) sp0</GET_STATE_EXTERNAL> <SIM_STATE_IS_ON_EXTERNAL>l0</SIM_STATE_IS_ON_EXTERNAL> </UseTemplate> </Template>

    Parameters initialization:

    • Default

      Parameters set:

      • ANIM_NAME
      • NODE_ID
      • PART_ID
      • COVER_NODE_ID
      • COVER_ANIM_NAME
      • SOURCE_BUS_ID
      • DESTINATION_BUS
      • ANIM_LENGTH
      • WWISE_EVENT_1
      • WWISE_EVENT_2
      • BTN_ID
      • TT_DESCRIPTION_ID
      • TOOLTIP_TITLE
    • Default

      Parameters set:

      • COVER_IE_NAME (using BTN_ID)
      • COVER_VAR_NAME (using BTN_ID)
      • COVER_VAR_TYPE

    Templates used:

    • ASOBO_GT_Switch_Covered

      Parameters set:

      • INPUT_EVENT_ID
      • TOOLTIP_ENTRY_0 (using BTN_ID)
      • COVER_IE_ID_SOURCE
      • SWITCH_NODE_ID (using NODE_ID)
      • SWITCH_ANIM_NAME (using ANIM_NAME)
      • TOGGLE_STATE (using BTN_ID)
      • SWITCH_ANIM_CODE (using BTN_ID)
      • SET_STATE_EXTERNAL (using SOURCE_BUS_ID, DESTINATION_BUS)
      • GET_STATE_EXTERNAL (using SOURCE_BUS_ID, DESTINATION_BUS)
      • SIM_STATE_IS_ON_EXTERNAL
    [Go back to top] [Go back to index]

  • ASOBO_ELECTRICAL_Switch_ExternalPower_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_Switch_ExternalPower_Template"> <Parameters Type="Default"> <ID>1</ID> <NUM_STATES>2</NUM_STATES> <INTERACTION_TYPE>SWITCH</INTERACTION_TYPE> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_ExternalPower_Template"/> </Template>

    Parameters initialization:

    • Default

      Parameters set:

      • ID
      • NUM_STATES
      • INTERACTION_TYPE
    [Go back to top] [Go back to index]

  • ASOBO_ELECTRICAL_Push_ExternalPower_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_Push_ExternalPower_Template"> <Parameters Type="Default"> <ID>1</ID> <INTERACTION_TYPE>PUSH</INTERACTION_TYPE> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_ExternalPower_Template"/> </Template>

    Parameters initialization:

    • Default

      Parameters set:

      • ID
      • INTERACTION_TYPE
    [Go back to top] [Go back to index]

  • ASOBO_ELECTRICAL_Switch_Connection_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_Switch_Connection_Template"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <Parameters Type="Default"> <NODE_ID>ELECTRICAL_Switch_Connection</NODE_ID> <ANIM_NAME>ELECTRICAL_Switch_Connection</ANIM_NAME> <SOURCE_BUS_ID>1</SOURCE_BUS_ID> <DESTINATION_BUS>2</DESTINATION_BUS> <ANIM_LENGTH>100</ANIM_LENGTH> <TOGGLE_CODE/> <WWISE_EVENT_1>electrical_switch_on</WWISE_EVENT_1> <NORMALIZED_TIME_1>0.1</NORMALIZED_TIME_1> <WWISE_EVENT_2>electrical_switch_off</WWISE_EVENT_2> <NORMALIZED_TIME_2>0.5</NORMALIZED_TIME_2> <ON_CONNECTION_ON/> <ON_CONNECTION_OFF/> <IS_CONNECTION_ON/> <INPUT_EVENT_ID_SOURCE>ELECTRICAL</INPUT_EVENT_ID_SOURCE> <IE_CONNECTION_ID>Connection_#ID#</IE_CONNECTION_ID> </Parameters> <Parameters Type="Override"> <SET_CONNECTION_STATE>l1 != if{ #DESTINATION_BUS# #SOURCE_BUS_ID# (&gt;K:2:ELECTRICAL_BUS_TO_BUS_CONNECTION_TOGGLE) }</SET_CONNECTION_STATE> <IS_CONNECTION_ON>#SOURCE_BUS_ID# (A:1:BUS CONNECTION ON:#DESTINATION_BUS#, Bool) #IS_CONNECTION_ON#</IS_CONNECTION_ON> </Parameters> <Parameters Type="Override"> <BTN_ID>#IE_CONNECTION_ID#</BTN_ID> <GET_STATE_EXTERNAL>#IS_CONNECTION_ON# sp1</GET_STATE_EXTERNAL> <SIM_STATE_IS_ON_EXTERNAL>l1</SIM_STATE_IS_ON_EXTERNAL> </Parameters> <Parameters Type="Override"> <SET_STATE_ON>1 #SET_CONNECTION_STATE# #ON_CONNECTION_ON#</SET_STATE_ON> <SET_STATE_OFF>0 #SET_CONNECTION_STATE# #ON_CONNECTION_OFF#</SET_STATE_OFF> <ON_BEFORE_SET_CODE>#GET_STATE_EXTERNAL# </ON_BEFORE_SET_CODE> <IS_CONNECTION_ON_EXTERNAL>(B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID#, Bool)</IS_CONNECTION_ON_EXTERNAL> <LEFT_SINGLE_CODE>(&gt;B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID#_Toggle)</LEFT_SINGLE_CODE> <TOOLTIP_ENTRY_0>#INPUT_EVENT_ID_SOURCE#_#BTN_ID#</TOOLTIP_ENTRY_0> </Parameters> <Parameters Type="Default"> <Condition Valid="IS_AIRLINER"> <SEQ1_EMISSIVE_CODE>#IS_CONNECTION_ON_EXTERNAL#</SEQ1_EMISSIVE_CODE> <SEQ2_EMISSIVE_CODE>#IS_CONNECTION_ON_EXTERNAL# !</SEQ2_EMISSIVE_CODE> </Condition> </Parameters> <Condition NotEmpty="ENSURE_VARIABLE_CONSISTENCY"> <UseTemplate Name="ASOBO_GT_Update"> <FREQUENCY>5</FREQUENCY> <UPDATE_CODE>#ENSURE_VARIABLE_CONSISTENCY#</UPDATE_CODE> </UseTemplate> </Condition> <Condition Valid="IS_AIRLINER"> <True> <UseTemplate Name="ASOBO_GT_Push_Button_Airliner"> <INPUT_EVENT_ID>ELECTRICAL</INPUT_EVENT_ID> <Condition Valid="INVERT_EMISSIVE_STATE"> <True> <SEQ1_EMISSIVE_CODE>#SEQ2_EMISSIVE_CODE#</SEQ1_EMISSIVE_CODE> <SEQ2_EMISSIVE_CODE>#SEQ1_EMISSIVE_CODE#</SEQ2_EMISSIVE_CODE> </True> </Condition> </UseTemplate> </True> <False> <Component ID="#NODE_ID#_#ID#" Node="#NODE_ID#"> <UseInputEvent ID="ELECTRICAL"> <ANIM>EXTERNAL</ANIM> </UseInputEvent> <UseTemplate Name="ASOBO_GT_Switch_Code"> <ANIM_CODE>#IS_CONNECTION_ON_EXTERNAL# #ANIM_LENGTH# *</ANIM_CODE> </UseTemplate> </Component> </False> </Condition> </Template>

    Parameters initialization:

    • Default

      Parameters set:

      • ID
    • Default

      Parameters set:

      • NODE_ID
      • ANIM_NAME
      • SOURCE_BUS_ID
      • DESTINATION_BUS
      • ANIM_LENGTH
      • TOGGLE_CODE
      • WWISE_EVENT_1
      • NORMALIZED_TIME_1
      • WWISE_EVENT_2
      • NORMALIZED_TIME_2
      • ON_CONNECTION_ON
      • ON_CONNECTION_OFF
      • IS_CONNECTION_ON
      • INPUT_EVENT_ID_SOURCE
      • IE_CONNECTION_ID (using ID)
    • Override

      Parameters set:

      • SET_CONNECTION_STATE (using DESTINATION_BUS, SOURCE_BUS_ID)
      • IS_CONNECTION_ON (using SOURCE_BUS_ID, DESTINATION_BUS, IS_CONNECTION_ON)
    • Override

      Parameters set:

      • BTN_ID (using IE_CONNECTION_ID)
      • GET_STATE_EXTERNAL (using IS_CONNECTION_ON)
      • SIM_STATE_IS_ON_EXTERNAL
    • Override

      Parameters set:

      • SET_STATE_ON (using SET_CONNECTION_STATE, ON_CONNECTION_ON)
      • SET_STATE_OFF (using SET_CONNECTION_STATE, ON_CONNECTION_OFF)
      • ON_BEFORE_SET_CODE (using GET_STATE_EXTERNAL)
      • IS_CONNECTION_ON_EXTERNAL (using INPUT_EVENT_ID_SOURCE, BTN_ID)
      • LEFT_SINGLE_CODE (using INPUT_EVENT_ID_SOURCE, BTN_ID)
      • TOOLTIP_ENTRY_0 (using INPUT_EVENT_ID_SOURCE, BTN_ID)
    • Default

      Condition: Valid(IS_AIRLINER)

      • Case: True

        Parameters set:

        • SEQ1_EMISSIVE_CODE (using IS_CONNECTION_ON_EXTERNAL)
        • SEQ2_EMISSIVE_CODE (using IS_CONNECTION_ON_EXTERNAL)

    Condition: NotEmpty(ENSURE_VARIABLE_CONSISTENCY)

    • Case: True

      Templates used:

      • ASOBO_GT_Update

        Parameters set:

        • FREQUENCY
        • UPDATE_CODE (using ENSURE_VARIABLE_CONSISTENCY)

    Condition: Valid(IS_AIRLINER)

    • Case: True

      Templates used:

      • ASOBO_GT_Push_Button_Airliner

        Parameters set:

        • INPUT_EVENT_ID

        Condition: Valid(INVERT_EMISSIVE_STATE)

        • Case: True

          Parameters set:

          • SEQ1_EMISSIVE_CODE (using SEQ2_EMISSIVE_CODE)
          • SEQ2_EMISSIVE_CODE (using SEQ1_EMISSIVE_CODE)
    • Case: False

      Parameters read:

      • NODE_ID
      • ID

      Components:

      • #NODE_ID#_#ID# (Node: #NODE_ID#)

        Parameters set:

        • ANIM

        Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_ELECTRICAL_Procedure_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_Procedure_Template"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Procedure_SubTemplate"/> </Template>

    Parameters initialization:

    • Default

      Parameters set:

      • ID
    [Go back to top] [Go back to index]

  • ASOBO_ELECTRICAL_Switch_Procedure_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_Switch_Procedure_Template"> <UseTemplate Name="ASOBO_ELECTRICAL_Procedure_Template"> <INTERACTION_TYPE>Switch</INTERACTION_TYPE> </UseTemplate> </Template>

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_ELECTRICAL_Push_Procedure_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_Push_Procedure_Template"> <UseTemplate Name="ASOBO_ELECTRICAL_Procedure_Template"> <INTERACTION_TYPE>Push</INTERACTION_TYPE> </UseTemplate> </Template>

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_ELECTRICAL_Switch_Breaker_Autopilot_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_Switch_Breaker_Autopilot_Template"> <Parameters Type="Default"> <NODE_ID>ELECTRICAL_Switch_Breaker_Autopilot</NODE_ID> <ANIM_NAME>ELECTRICAL_Switch_Breaker_Autopilot</ANIM_NAME> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Switch_Breaker_Template"> <CIRCUIT_NAME>AUTOPILOT</CIRCUIT_NAME> </UseTemplate> </Template>

    Parameters initialization:

    • Default

      Parameters set:

      • NODE_ID
      • ANIM_NAME

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_ELECTRICAL_Switch_Breaker_AvnFan_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_Switch_Breaker_AvnFan_Template"> <Parameters Type="Default"> <NODE_ID>ELECTRICAL_Switch_Breaker_AvnFan</NODE_ID> <ANIM_NAME>ELECTRICAL_Switch_Breaker_AvnFan</ANIM_NAME> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Switch_Breaker_Template"> <CIRCUIT_NAME>AVNFAN</CIRCUIT_NAME> </UseTemplate> </Template>

    Parameters initialization:

    • Default

      Parameters set:

      • NODE_ID
      • ANIM_NAME

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_ELECTRICAL_Switch_Breaker_GPS_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_Switch_Breaker_GPS_Template"> <Parameters Type="Default"> <NODE_ID>ELECTRICAL_Switch_Breaker_GPS</NODE_ID> <ANIM_NAME>ELECTRICAL_Switch_Breaker_GPS</ANIM_NAME> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Switch_Breaker_Template"> <CIRCUIT_NAME>GPS</CIRCUIT_NAME> </UseTemplate> </Template>

    Parameters initialization:

    • Default

      Parameters set:

      • NODE_ID
      • ANIM_NAME

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_ELECTRICAL_Switch_Breaker_Avionics_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_Switch_Breaker_Avionics_Template"> <Parameters Type="Default"> <NODE_ID>ELECTRICAL_Switch_Breaker_Avionics</NODE_ID> <ANIM_NAME>ELECTRICAL_Switch_Breaker_Avionics</ANIM_NAME> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Switch_Breaker_Template"> <CIRCUIT_NAME>AVNBUS1</CIRCUIT_NAME> </UseTemplate> </Template>

    Parameters initialization:

    • Default

      Parameters set:

      • NODE_ID
      • ANIM_NAME

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_ELECTRICAL_Switch_Breaker_NAVCOM1_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_Switch_Breaker_NAVCOM1_Template"> <Parameters Type="Default"> <NODE_ID>ELECTRICAL_Switch_Breaker_NAVCOM1</NODE_ID> <ANIM_NAME>ELECTRICAL_Switch_Breaker_NAVCOM1</ANIM_NAME> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Switch_Breaker_Template"> <CIRCUIT_NAME>NAVCOM1</CIRCUIT_NAME> </UseTemplate> </Template>

    Parameters initialization:

    • Default

      Parameters set:

      • NODE_ID
      • ANIM_NAME

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_ELECTRICAL_Switch_Breaker_NAVCOM2_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_Switch_Breaker_NAVCOM2_Template"> <Parameters Type="Default"> <NODE_ID>ELECTRICAL_Switch_Breaker_NAVCOM2</NODE_ID> <ANIM_NAME>ELECTRICAL_Switch_Breaker_NAVCOM2</ANIM_NAME> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Switch_Breaker_Template"> <CIRCUIT_NAME>NAVCOM2</CIRCUIT_NAME> </UseTemplate> </Template>

    Parameters initialization:

    • Default

      Parameters set:

      • NODE_ID
      • ANIM_NAME

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_ELECTRICAL_Switch_Breaker_NAVCOM3_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_Switch_Breaker_NAVCOM3_Template"> <Parameters Type="Default"> <NODE_ID>ELECTRICAL_Switch_Breaker_NAVCOM3</NODE_ID> <ANIM_NAME>ELECTRICAL_Switch_Breaker_NAVCOM3</ANIM_NAME> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Switch_Breaker_Template"> <CIRCUIT_NAME>NAVCOM3</CIRCUIT_NAME> </UseTemplate> </Template>

    Parameters initialization:

    • Default

      Parameters set:

      • NODE_ID
      • ANIM_NAME

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_ELECTRICAL_Switch_Breaker_ADF_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_Switch_Breaker_ADF_Template"> <Parameters Type="Default"> <NODE_ID>ELECTRICAL_Switch_Breaker_ADF</NODE_ID> <ANIM_NAME>ELECTRICAL_Switch_Breaker_ADF</ANIM_NAME> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Switch_Breaker_Template"> <CIRCUIT_NAME>ADF</CIRCUIT_NAME> </UseTemplate> </Template>

    Parameters initialization:

    • Default

      Parameters set:

      • NODE_ID
      • ANIM_NAME

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_ELECTRICAL_Switch_Breaker_XPNDR_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_Switch_Breaker_XPNDR_Template"> <Parameters Type="Default"> <NODE_ID>ELECTRICAL_Switch_Breaker_XPNDR</NODE_ID> <ANIM_NAME>ELECTRICAL_Switch_Breaker_XPNDR</ANIM_NAME> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Switch_Breaker_Template"> <CIRCUIT_NAME>XPNDR</CIRCUIT_NAME> </UseTemplate> </Template>

    Parameters initialization:

    • Default

      Parameters set:

      • NODE_ID
      • ANIM_NAME

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_ELECTRICAL_Switch_Breaker_FLAP_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_Switch_Breaker_FLAP_Template"> <Parameters Type="Default"> <NODE_ID>ELECTRICAL_Switch_Breaker_FLAP</NODE_ID> <ANIM_NAME>ELECTRICAL_Switch_Breaker_FLAP</ANIM_NAME> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Switch_Breaker_Template"> <CIRCUIT_NAME>FLAP</CIRCUIT_NAME> </UseTemplate> </Template>

    Parameters initialization:

    • Default

      Parameters set:

      • NODE_ID
      • ANIM_NAME

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_ELECTRICAL_Switch_Breaker_AVNBUS1_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_Switch_Breaker_AVNBUS1_Template"> <Parameters Type="Default"> <NODE_ID>ELECTRICAL_Switch_Breaker_AVNBUS1</NODE_ID> <ANIM_NAME>ELECTRICAL_Switch_Breaker_AVNBUS1</ANIM_NAME> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Switch_Breaker_Template"> <CIRCUIT_NAME>AVNBUS1</CIRCUIT_NAME> </UseTemplate> </Template>

    Parameters initialization:

    • Default

      Parameters set:

      • NODE_ID
      • ANIM_NAME

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_ELECTRICAL_Switch_Breaker_AVNBUS2_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_Switch_Breaker_AVNBUS2_Template"> <Parameters Type="Default"> <NODE_ID>ELECTRICAL_Switch_Breaker_AVNBUS2</NODE_ID> <ANIM_NAME>ELECTRICAL_Switch_Breaker_AVNBUS2</ANIM_NAME> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Switch_Breaker_Template"> <CIRCUIT_NAME>AVNBUS2</CIRCUIT_NAME> </UseTemplate> </Template>

    Parameters initialization:

    • Default

      Parameters set:

      • NODE_ID
      • ANIM_NAME

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_ELECTRICAL_Switch_Breaker_LTSPWR_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_Switch_Breaker_LTSPWR_Template"> <Parameters Type="Default"> <NODE_ID>ELECTRICAL_Switch_Breaker_LTSPWR</NODE_ID> <ANIM_NAME>ELECTRICAL_Switch_Breaker_LTSPWR</ANIM_NAME> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Switch_Breaker_Template"> <CIRCUIT_NAME>LTSPWR</CIRCUIT_NAME> </UseTemplate> </Template>

    Parameters initialization:

    • Default

      Parameters set:

      • NODE_ID
      • ANIM_NAME

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_ELECTRICAL_Switch_Breaker_ALTFLD_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_Switch_Breaker_ALTFLD_Template"> <Parameters Type="Default"> <NODE_ID>ELECTRICAL_Switch_Breaker_ALTFLD</NODE_ID> <ANIM_NAME>ELECTRICAL_Switch_Breaker_ALTFLD</ANIM_NAME> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Switch_Breaker_Template"> <CIRCUIT_NAME>ALTFLD</CIRCUIT_NAME> </UseTemplate> </Template>

    Parameters initialization:

    • Default

      Parameters set:

      • NODE_ID
      • ANIM_NAME

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_ELECTRICAL_Emissive_Bus_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_Emissive_Bus_Template"> <Parameters Type="Default"> <BUS_INDEX>-1</BUS_INDEX> </Parameters> <UseTemplate Name="ASOBO_ELECTRICAL_Emissive_Bus_SubTemplate"/> </Template>

    Parameters initialization:

    • Default

      Parameters set:

      • BUS_INDEX
    [Go back to top] [Go back to index]

  • ASOBO_ELECTRICAL_Base_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_Base_Template"> <Parameters Type="Default"> <INPUT_EVENT_ID_SOURCE>ELECTRICAL</INPUT_EVENT_ID_SOURCE> <WWISE_PREFIX>ELECTRICAL</WWISE_PREFIX> </Parameters> <UseTemplate Name="ASOBO_Interaction_Base_Template"> <USE_INPUT_EVENT_ID>ELECTRICAL</USE_INPUT_EVENT_ID> </UseTemplate> </Template>

    Parameters initialization:

    • Default

      Parameters set:

      • INPUT_EVENT_ID_SOURCE
      • WWISE_PREFIX

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_ELECTRICAL_Push_Event_Base_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_Push_Event_Base_Template"> <UseTemplate Name="ASOBO_Interaction_Push_Event_Base_Template"> <USE_INPUT_EVENT_ID>ELECTRICAL</USE_INPUT_EVENT_ID> </UseTemplate> </Template>

    Templates used:

    [Go back to top] [Go back to index]

  • ASOBO_ELECTRICAL_Pull_Event_Base_Template

    Definition from XML
    <Template Name="ASOBO_ELECTRICAL_Pull_Event_Base_Template"> <UseTemplate Name="ASOBO_Interaction_Pull_Event_Base_Template"> <USE_INPUT_EVENT_ID>ELECTRICAL</USE_INPUT_EVENT_ID> </UseTemplate> </Template>

    Templates used:

    [Go back to top] [Go back to index]