[Go back to index]
Asobo\Generic\FX.xml
Source XML
<!-- ####################################################################### -->
<!-- ######################### FX Templates ######################## -->
<!-- ####################################################################### -->
<ModelBehaviors>
<!--
Base FX Template.
Must be used in a component that specifies a Node.
Required parameter:
FX_GUID
FX_CODE
-->
<Template Name = "ASOBO_GT_FX">
<DefaultTemplateParameters>
<FX_GUID></FX_GUID>
<FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID>
<FX_OFFSET_X>0.0</FX_OFFSET_X>
<FX_OFFSET_Y>0.0</FX_OFFSET_Y>
<FX_OFFSET_Z>0.0</FX_OFFSET_Z>
<FX_ROTATION_OFFSET_P>0.0</FX_ROTATION_OFFSET_P>
<FX_ROTATION_OFFSET_B>0.0</FX_ROTATION_OFFSET_B>
<FX_ROTATION_OFFSET_H>0.0</FX_ROTATION_OFFSET_H>
<FX_MIN_EMISSION_TIME>-1</FX_MIN_EMISSION_TIME>
</DefaultTemplateParameters>
<EditableTemplateParameters>
<FX_GUID></FX_GUID>
<FX_CONTACT_POINT_ID></FX_CONTACT_POINT_ID>
<FX_CODE></FX_CODE>
<FX_OFFSET_X gizmo-node-relpos-x=""></FX_OFFSET_X>
<FX_OFFSET_Y gizmo-node-relpos-y=""></FX_OFFSET_Y>
<FX_OFFSET_Z gizmo-node-relpos-z=""></FX_OFFSET_Z>
<FX_ROTATION_OFFSET_P gizmo-node-relrot-p=""></FX_ROTATION_OFFSET_P>
<FX_ROTATION_OFFSET_B gizmo-node-relrot-b=""></FX_ROTATION_OFFSET_B>
<FX_ROTATION_OFFSET_H gizmo-node-relrot-h=""></FX_ROTATION_OFFSET_H>
</EditableTemplateParameters>
<Condition>
<Test>
<Arg Valid="FX_GUID" />
</Test>
<True>
<FX GUID="#FX_GUID#">
<Offset>
<X>#FX_OFFSET_X#</X>
<Y>#FX_OFFSET_Y#</Y>
<Z>#FX_OFFSET_Z#</Z>
<P>#FX_ROTATION_OFFSET_P#</P>
<B>#FX_ROTATION_OFFSET_B#</B>
<H>#FX_ROTATION_OFFSET_H#</H>
</Offset>
<ContactPoint>#FX_CONTACT_POINT_ID#</ContactPoint>
<Code>#FX_CODE#</Code>
<MinEmissionTime>#FX_MIN_EMISSION_TIME#</MinEmissionTime>
<EnableEntries>
<Loop>
<Setup>
<Param>ID</Param>
<From>0</From>
<Inc>1</Inc>
<While>
<Arg NotEmpty="ENABLE_SURFACE_TYPE_#ID#"/>
</While>
</Setup>
<Do>
<Parameters Type="Override">
<SURFACE_TYPE_LABEL Process="Param">ENABLE_SURFACE_TYPE_#ID#</SURFACE_TYPE_LABEL>
</Parameters>
<SurfaceTypeEntry SurfaceType="#SURFACE_TYPE_LABEL#"/>
</Do>
</Loop>
</EnableEntries>
<DisableEntries>
<Loop>
<Setup>
<Param>ID</Param>
<From>0</From>
<Inc>1</Inc>
<While>
<Arg NotEmpty="DISABLE_SURFACE_TYPE_#ID#"/>
</While>
</Setup>
<Do>
<Parameters Type="Override">
<SURFACE_TYPE_LABEL Process="Param">DISABLE_SURFACE_TYPE_#ID#</SURFACE_TYPE_LABEL>
</Parameters>
<SurfaceTypeEntry SurfaceType="#SURFACE_TYPE_LABEL#"/>
</Do>
</Loop>
</DisableEntries>
<OverrideEntries>
<Loop>
<Setup>
<Param>ID</Param>
<From>0</From>
<Inc>1</Inc>
<While>
<And>
<Arg NotEmpty="OVERRIDE_SURFACE_TYPE_#ID#"/>
<Arg NotEmpty="OVERRIDE_FX_SURFACE_TYPE_GUID_#ID#"/>
</And>
</While>
</Setup>
<Do>
<Parameters Type="Override">
<SURFACE_TYPE_LABEL Process="Param">OVERRIDE_SURFACE_TYPE_#ID#</SURFACE_TYPE_LABEL>
<SURFACE_TYPE_FX_GUID Process="Param">OVERRIDE_FX_SURFACE_TYPE_GUID_#ID#</SURFACE_TYPE_FX_GUID>
</Parameters>
<SurfaceTypeFXEntry SurfaceType="#SURFACE_TYPE_LABEL#" FXGuid="#SURFACE_TYPE_FX_GUID#"/>
</Do>
</Loop>
</OverrideEntries>
<GraphParameters>
<Loop>
<Setup>
<Param>ID</Param>
<From>0</From>
<Inc>1</Inc>
<While>
<Arg NotEmpty="FX_GRAPH_PARAM_#ID#"/>
</While>
</Setup>
<Do>
<Parameters Type="Override">
<GRAPH_PARAM_LABEL Process="Param">FX_GRAPH_PARAM_#ID#</GRAPH_PARAM_LABEL>
</Parameters>
<GraphParam>#GRAPH_PARAM_LABEL#</GraphParam>
</Do>
</Loop>
</GraphParameters>
</FX>
</True>
</Condition>
</Template>
<!-- Contrails -->
<Template Name="ASOBO_CONTRAIL_QUAD_FX">
<Parameters Type="Default">
<FX_GUID>{F42CE638-11EB-4FC8-B9B0-111A220D681F}</FX_GUID>
<FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID>
<FX_ENGINE_ID>0</FX_ENGINE_ID>
<FX_OFFSET_X>0</FX_OFFSET_X>
<FX_OFFSET_Y>0</FX_OFFSET_Y>
<FX_OFFSET_Z>0</FX_OFFSET_Z>
</Parameters>
<Parameters Type="Default">
<FX_CODE>(A:CONTRAILS CONDITIONS MET:#FX_ENGINE_ID#, Bool) (A:GENERAL ENG COMBUSTION:#FX_ENGINE_ID#, Bool) and</FX_CODE>
</Parameters>
<Component ID="FX_CONTRAIL_QUAD_#FX_NODE#" Node="#FX_NODE#">
<UseTemplate Name="ASOBO_GT_FX" />
</Component>
</Template>
<Template Name="ASOBO_CONTRAIL_RIBBON_FX">
<Parameters Type="Default">
<FX_GUID>{904EC2CE-F8DD-4480-99E7-B33F7CF6E114}</FX_GUID>
<FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID>
<FX_ENGINE_ID>0</FX_ENGINE_ID>
<FX_OFFSET_X>0</FX_OFFSET_X>
<FX_OFFSET_Y>0</FX_OFFSET_Y>
<FX_OFFSET_Z>0</FX_OFFSET_Z>
</Parameters>
<Parameters Type="Default">
<FX_CODE>(A:CONTRAILS CONDITIONS MET:#FX_ENGINE_ID#, Bool) (A:GENERAL ENG COMBUSTION:#FX_ENGINE_ID#, Bool) and</FX_CODE>
</Parameters>
<Component ID="FX_CONTRAIL_RIBBON_#FX_NODE#" Node="#FX_NODE#">
<UseTemplate Name="ASOBO_GT_FX" />
</Component>
</Template>
<!-- Gear-based triggers -->
<!-- Only to be used with aircraft where the contact point numbers in flight_model.cfg match the STANDARD_GEAR enum -->
<!-- i.e. 0 = center, 1 = left, 2 = right -->
<!-- in all other cases, use CP-based triggers below -->
<Template Name = "ASOBO_WET_GR_LANDING_FX">
<DefaultTemplateParameters>
<FX_GUID>{B2C7B9A6-8F3D-49CE-8418-64086E23C5CB}</FX_GUID>
<FX_NAME>LANDING_GR_WET</FX_NAME>
<FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID>
<FX_NODE>__NO_NODE__</FX_NODE>
<DISABLE_SURFACE_TYPE_0>RIVER</DISABLE_SURFACE_TYPE_0>
<DISABLE_SURFACE_TYPE_1>WASTE_WATER</DISABLE_SURFACE_TYPE_1>
<DISABLE_SURFACE_TYPE_2>WATER</DISABLE_SURFACE_TYPE_2>
<DISABLE_SURFACE_TYPE_3>POND</DISABLE_SURFACE_TYPE_3>
<DISABLE_SURFACE_TYPE_4>LAKE</DISABLE_SURFACE_TYPE_4>
<DISABLE_SURFACE_TYPE_5>OCEAN</DISABLE_SURFACE_TYPE_5>
<DISABLE_SURFACE_TYPE_6>WATER_FSX</DISABLE_SURFACE_TYPE_6>
</DefaultTemplateParameters>
<Component ID="FX_LANDING_GR_WET_#FX_NODE#_#FX_CONTACT_POINT_ID#" Node="#FX_NODE#">
<UseTemplate Name="ASOBO_GT_FX">
<FX_CODE>(A:GEAR IS ON GROUND:#FX_CONTACT_POINT_ID#, Keyframe) 0 > (A:GROUND VELOCITY, knot) 0.1 > and (A:SURFACE CONDITION, enum) 1 == and</FX_CODE>
</UseTemplate>
</Component>
</Template>
<Template Name = "ASOBO_WET_MD_GR_LANDING_FX">
<DefaultTemplateParameters>
<FX_GUID>{25736E7E-6F36-4046-91BC-9AFFCE737F28}</FX_GUID>
<FX_NAME>LANDING_GR_MD_WET</FX_NAME>
<FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID>
<FX_NODE>__NO_NODE__</FX_NODE>
<DISABLE_SURFACE_TYPE_0>RIVER</DISABLE_SURFACE_TYPE_0>
<DISABLE_SURFACE_TYPE_1>WASTE_WATER</DISABLE_SURFACE_TYPE_1>
<DISABLE_SURFACE_TYPE_2>WATER</DISABLE_SURFACE_TYPE_2>
<DISABLE_SURFACE_TYPE_3>POND</DISABLE_SURFACE_TYPE_3>
<DISABLE_SURFACE_TYPE_4>LAKE</DISABLE_SURFACE_TYPE_4>
<DISABLE_SURFACE_TYPE_5>OCEAN</DISABLE_SURFACE_TYPE_5>
<DISABLE_SURFACE_TYPE_6>WATER_FSX</DISABLE_SURFACE_TYPE_6>
</DefaultTemplateParameters>
<Component ID="FX_LANDING_GR_MD_WET_#FX_NODE#_#FX_CONTACT_POINT_ID#" Node="#FX_NODE#">
<UseTemplate Name="ASOBO_GT_FX">
<FX_CODE>(A:GEAR IS ON GROUND:#FX_CONTACT_POINT_ID#, Keyframe) 0 > (A:GROUND VELOCITY, knot) 0.1 > and (A:SURFACE CONDITION, enum) 1 == and</FX_CODE>
</UseTemplate>
</Component>
</Template>
<Template Name = "ASOBO_WET_LG_GR_LANDING_FX">
<DefaultTemplateParameters>
<FX_GUID>{0915D0C5-F0B3-4EAD-8D96-08FF2F6F0057}</FX_GUID>
<FX_NAME>LANDING_GR_LG_WET</FX_NAME>
<FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID>
<FX_NODE>__NO_NODE__</FX_NODE>
<DISABLE_SURFACE_TYPE_0>RIVER</DISABLE_SURFACE_TYPE_0>
<DISABLE_SURFACE_TYPE_1>WASTE_WATER</DISABLE_SURFACE_TYPE_1>
<DISABLE_SURFACE_TYPE_2>WATER</DISABLE_SURFACE_TYPE_2>
<DISABLE_SURFACE_TYPE_3>POND</DISABLE_SURFACE_TYPE_3>
<DISABLE_SURFACE_TYPE_4>LAKE</DISABLE_SURFACE_TYPE_4>
<DISABLE_SURFACE_TYPE_5>OCEAN</DISABLE_SURFACE_TYPE_5>
<DISABLE_SURFACE_TYPE_6>WATER_FSX</DISABLE_SURFACE_TYPE_6>
</DefaultTemplateParameters>
<Component ID="FX_LANDING_GR_LG_WET_#FX_NODE#_#FX_CONTACT_POINT_ID#" Node="#FX_NODE#">
<UseTemplate Name="ASOBO_GT_FX">
<FX_CODE>(A:GEAR IS ON GROUND:#FX_CONTACT_POINT_ID#, Keyframe) 0 > (A:GROUND VELOCITY, knot) 0.1 > and (A:SURFACE CONDITION, enum) 1 == and</FX_CODE>
</UseTemplate>
</Component>
</Template>
<Template Name = "ASOBO_SMOKE_GR_LANDING_FX">
<DefaultTemplateParameters>
<FX_GUID>{7E68323C-E75D-4F5B-988E-65DD4956F6BA}</FX_GUID>
<FX_NAME>LANDING_GR_SMOKE</FX_NAME>
<FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID>
<FX_NODE>__NO_NODE__</FX_NODE>
<ENABLE_SURFACE_TYPE_0>CONCRETE</ENABLE_SURFACE_TYPE_0>
<ENABLE_SURFACE_TYPE_1>ASPHALT</ENABLE_SURFACE_TYPE_1>
<ENABLE_SURFACE_TYPE_2>BITUMINUS</ENABLE_SURFACE_TYPE_2>
<ENABLE_SURFACE_TYPE_3>MACADAM</ENABLE_SURFACE_TYPE_3>
<ENABLE_SURFACE_TYPE_4>TARMAC</ENABLE_SURFACE_TYPE_4>
</DefaultTemplateParameters>
<Component ID="FX_LANDING_GR_SMOKE_#FX_NODE#_#FX_CONTACT_POINT_ID#" Node="#FX_NODE#">
<UseTemplate Name="ASOBO_GT_FX">
<FX_CODE>(A:GEAR IS ON GROUND:#FX_CONTACT_POINT_ID#, Keyframe) 0 > (A:GEAR SKIDDING FACTOR:#FX_CONTACT_POINT_ID#, Keyframe) 0 > and (A:SURFACE CONDITION, enum) 1 != and</FX_CODE>
</UseTemplate>
</Component>
</Template>
<Template Name = "ASOBO_SMOKE_MD_GR_LANDING_FX">
<DefaultTemplateParameters>
<FX_GUID>{38428600-D14A-41A8-9FED-A7C815F89AEE}</FX_GUID>
<FX_NAME>LANDING_GR_MD_SMOKE</FX_NAME>
<FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID>
<FX_NODE>__NO_NODE__</FX_NODE>
<ENABLE_SURFACE_TYPE_0>CONCRETE</ENABLE_SURFACE_TYPE_0>
<ENABLE_SURFACE_TYPE_1>ASPHALT</ENABLE_SURFACE_TYPE_1>
<ENABLE_SURFACE_TYPE_2>BITUMINUS</ENABLE_SURFACE_TYPE_2>
<ENABLE_SURFACE_TYPE_3>MACADAM</ENABLE_SURFACE_TYPE_3>
<ENABLE_SURFACE_TYPE_4>TARMAC</ENABLE_SURFACE_TYPE_4>
</DefaultTemplateParameters>
<Component ID="FX_LANDING_GR_MD_SMOKE_#FX_NODE#_#FX_CONTACT_POINT_ID#" Node="#FX_NODE#">
<UseTemplate Name="ASOBO_GT_FX">
<FX_CODE>(A:GEAR IS ON GROUND:#FX_CONTACT_POINT_ID#, Keyframe) 0 > (A:GEAR SKIDDING FACTOR:#FX_CONTACT_POINT_ID#, Keyframe) 0 > and (A:SURFACE CONDITION, enum) 1 != and</FX_CODE>
</UseTemplate>
</Component>
</Template>
<Template Name = "ASOBO_SMOKE_LG_GR_LANDING_FX">
<DefaultTemplateParameters>
<FX_GUID>{C9747EAE-5970-477A-81D7-2FC96CE0C3EA}</FX_GUID>
<FX_NAME>LANDING_GR_LG_SMOKE</FX_NAME>
<FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID>
<FX_NODE>__NO_NODE__</FX_NODE>
<ENABLE_SURFACE_TYPE_0>CONCRETE</ENABLE_SURFACE_TYPE_0>
<ENABLE_SURFACE_TYPE_1>ASPHALT</ENABLE_SURFACE_TYPE_1>
<ENABLE_SURFACE_TYPE_2>BITUMINUS</ENABLE_SURFACE_TYPE_2>
<ENABLE_SURFACE_TYPE_3>MACADAM</ENABLE_SURFACE_TYPE_3>
<ENABLE_SURFACE_TYPE_4>TARMAC</ENABLE_SURFACE_TYPE_4>
</DefaultTemplateParameters>
<Component ID="FX_LANDING_GR_LG_SMOKE_#FX_NODE#_#FX_CONTACT_POINT_ID#" Node="#FX_NODE#">
<UseTemplate Name="ASOBO_GT_FX">
<FX_CODE>(A:GEAR IS ON GROUND:#FX_CONTACT_POINT_ID#, Keyframe) 0 > (A:GEAR SKIDDING FACTOR:#FX_CONTACT_POINT_ID#, Keyframe) 0 > and (A:SURFACE CONDITION, enum) 1 != and</FX_CODE>
</UseTemplate>
</Component>
</Template>
<Template Name = "ASOBO_DUST_GR_LANDING_FX">
<DefaultTemplateParameters>
<FX_GUID>{B563B75A-F2F0-4F09-8617-BE9F173BC8FB}</FX_GUID>
<FX_NAME>LANDING_GR_DUST</FX_NAME>
<FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID>
<FX_NODE>__NO_NODE__</FX_NODE>
<ENABLE_SURFACE_TYPE_0>SAND</ENABLE_SURFACE_TYPE_0>
<ENABLE_SURFACE_TYPE_1>DIRT</ENABLE_SURFACE_TYPE_1>
</DefaultTemplateParameters>
<Component ID="FX_LANDING_GR_DUST_#FX_NODE#_#FX_CONTACT_POINT_ID#" Node="#FX_NODE#">
<UseTemplate Name="ASOBO_GT_FX">
<FX_CODE>(A:GEAR IS ON GROUND:#FX_CONTACT_POINT_ID#, Keyframe) 0 > (A:GROUND VELOCITY, knot) 0.1 > and (A:SURFACE CONDITION, enum) 1 != and</FX_CODE>
</UseTemplate>
</Component>
</Template>
<Template Name = "ASOBO_GRASS_GR_LANDING_FX">
<DefaultTemplateParameters>
<FX_GUID>{F3BD2906-EF27-406B-BB55-02FF0BBCEF01}</FX_GUID>
<FX_NAME>LANDING_GR_GRASS</FX_NAME>
<FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID>
<FX_NODE>__NO_NODE__</FX_NODE>
<ENABLE_SURFACE_TYPE_0>GRASS</ENABLE_SURFACE_TYPE_0>
</DefaultTemplateParameters>
<Component ID="FX_LANDING_GR_GRASS_#FX_NODE#_#FX_CONTACT_POINT_ID#" Node="#FX_NODE#">
<UseTemplate Name="ASOBO_GT_FX">
<FX_CODE>(A:GEAR IS ON GROUND:#FX_CONTACT_POINT_ID#, Keyframe) 0 > (A:GROUND VELOCITY, knot) 0.1 > and</FX_CODE>
</UseTemplate>
</Component>
</Template>
<Template Name = "ASOBO_SNOW_GR_LANDING_FX">
<DefaultTemplateParameters>
<FX_GUID>{B9EEB6C8-D2F1-45C3-951D-033D973E18C8}</FX_GUID>
<FX_NAME>LANDING_GR_SNOW</FX_NAME>
<FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID>
<FX_NODE>__NO_NODE__</FX_NODE>
<ENABLE_SURFACE_TYPE_0>SNOW</ENABLE_SURFACE_TYPE_0>
</DefaultTemplateParameters>
<Component ID="FX_LANDING_GR_SNOW_#FX_NODE#_#FX_CONTACT_POINT_ID#" Node="#FX_NODE#">
<UseTemplate Name="ASOBO_GT_FX">
<FX_CODE>(A:GEAR IS ON GROUND:#FX_CONTACT_POINT_ID#, Keyframe) 0 > (A:GROUND VELOCITY, knot) 5 > and (A:SURFACE CONDITION, enum) 1 != and</FX_CODE>
</UseTemplate>
</Component>
</Template>
<Template Name = "ASOBO_SNOW_LG_GR_LANDING_FX">
<DefaultTemplateParameters>
<FX_GUID>{883A007E-4DEE-4D3D-8081-55CC462986CA}</FX_GUID>
<FX_NAME>LANDING_GR_LG_SNOW</FX_NAME>
<FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID>
<FX_NODE>__NO_NODE__</FX_NODE>
<ENABLE_SURFACE_TYPE_0>SNOW</ENABLE_SURFACE_TYPE_0>
</DefaultTemplateParameters>
<Component ID="FX_LANDING_GR_LG_SNOW_#FX_NODE#_#FX_CONTACT_POINT_ID#" Node="#FX_NODE#">
<UseTemplate Name="ASOBO_GT_FX">
<FX_CODE>(A:GEAR IS ON GROUND:#FX_CONTACT_POINT_ID#, Keyframe) 0 > (A:GROUND VELOCITY, knot) 5 > and (A:SURFACE CONDITION, enum) 1 != and</FX_CODE>
</UseTemplate>
</Component>
</Template>
<Template Name = "ASOBO_WATER_GR_LANDING_FX">
<DefaultTemplateParameters>
<FX_GUID>{BA223A84-9E83-4A58-B7D7-0C9CBA4E1627}</FX_GUID>
<FX_NAME>LANDING_GR_WATER</FX_NAME>
<FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID>
<FX_NODE>__NO_NODE__</FX_NODE>
<ENABLE_SURFACE_TYPE_0>RIVER</ENABLE_SURFACE_TYPE_0>
<ENABLE_SURFACE_TYPE_1>WASTE_WATER</ENABLE_SURFACE_TYPE_1>
<ENABLE_SURFACE_TYPE_2>WATER</ENABLE_SURFACE_TYPE_2>
<ENABLE_SURFACE_TYPE_3>POND</ENABLE_SURFACE_TYPE_3>
<ENABLE_SURFACE_TYPE_4>LAKE</ENABLE_SURFACE_TYPE_4>
<ENABLE_SURFACE_TYPE_5>OCEAN</ENABLE_SURFACE_TYPE_5>
<ENABLE_SURFACE_TYPE_6>WATER_FSX</ENABLE_SURFACE_TYPE_6>
</DefaultTemplateParameters>
<Component ID="FX_LANDING_GR_WATER_#FX_NODE#_#FX_CONTACT_POINT_ID#" Node="#FX_NODE#">
<UseTemplate Name="ASOBO_GT_FX">
<FX_CODE>(A:GEAR WATER DEPTH:#FX_CONTACT_POINT_ID#, Keyframe) 0 > (A:GROUND VELOCITY, knot) 5 > and</FX_CODE>
</UseTemplate>
</Component>
</Template>
<Template Name = "ASOBO_AIRCRAFT_CARRIER_WAKE_FX">
<DefaultTemplateParameters>
<FX_GUID>{62B8CED1-7510-4FCF-A356-AD19C7C92C6A}</FX_GUID>
<FX_NAME>LANDING_GR_WATER</FX_NAME>
<FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID>
<FX_NODE>__NO_NODE__</FX_NODE>
<ENABLE_SURFACE_TYPE_0>RIVER</ENABLE_SURFACE_TYPE_0>
<ENABLE_SURFACE_TYPE_1>WASTE_WATER</ENABLE_SURFACE_TYPE_1>
<ENABLE_SURFACE_TYPE_2>WATER</ENABLE_SURFACE_TYPE_2>
<ENABLE_SURFACE_TYPE_3>POND</ENABLE_SURFACE_TYPE_3>
<ENABLE_SURFACE_TYPE_4>LAKE</ENABLE_SURFACE_TYPE_4>
<ENABLE_SURFACE_TYPE_5>OCEAN</ENABLE_SURFACE_TYPE_5>
<ENABLE_SURFACE_TYPE_6>WATER_FSX</ENABLE_SURFACE_TYPE_6>
</DefaultTemplateParameters>
<Component ID="FX_LANDING_GR_WATER_#FX_NODE#_#FX_CONTACT_POINT_ID#" Node="#FX_NODE#">
<UseTemplate Name="ASOBO_GT_FX">
<FX_CODE>(A:PLANE ALT ABOVE GROUND, Feet) 30000 <</FX_CODE>
</UseTemplate>
</Component>
</Template>
<Template Name = "ASOBO_WATER_NODE_FRIGATEWAKE_FX">
<DefaultTemplateParameters>
<FX_GUID>{43962C0A-B1C7-448C-9268-1DFD020623F0}</FX_GUID>
<FX_NAME>LANDING_GR_WATER</FX_NAME>
<FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID>
<FX_NODE>__NO_NODE__</FX_NODE>
<ENABLE_SURFACE_TYPE_0>RIVER</ENABLE_SURFACE_TYPE_0>
<ENABLE_SURFACE_TYPE_1>WASTE_WATER</ENABLE_SURFACE_TYPE_1>
<ENABLE_SURFACE_TYPE_2>WATER</ENABLE_SURFACE_TYPE_2>
<ENABLE_SURFACE_TYPE_3>POND</ENABLE_SURFACE_TYPE_3>
<ENABLE_SURFACE_TYPE_4>LAKE</ENABLE_SURFACE_TYPE_4>
<ENABLE_SURFACE_TYPE_5>OCEAN</ENABLE_SURFACE_TYPE_5>
<ENABLE_SURFACE_TYPE_6>WATER_FSX</ENABLE_SURFACE_TYPE_6>
</DefaultTemplateParameters>
<Component ID="FX_LANDING_GR_WATER_#FX_NODE#_#FX_CONTACT_POINT_ID#" Node="#FX_NODE#">
<UseTemplate Name="ASOBO_GT_FX">
<FX_CODE>(A:PLANE ALT ABOVE GROUND, Feet) 30000</FX_CODE>
</UseTemplate>
</Component>
</Template>
<Template Name = "ASOBO_WATER_NODE_BOATWAKE_FX">
<DefaultTemplateParameters>
<FX_GUID>{4D375088-1A82-48C5-BD7F-09D28186C9B6}</FX_GUID>
<FX_NAME>BOATWAKE_FX</FX_NAME>
<FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID>
<FX_NODE>__NO_NODE__</FX_NODE>
<ENABLE_SURFACE_TYPE_0>RIVER</ENABLE_SURFACE_TYPE_0>
<ENABLE_SURFACE_TYPE_1>WASTE_WATER</ENABLE_SURFACE_TYPE_1>
<ENABLE_SURFACE_TYPE_2>WATER</ENABLE_SURFACE_TYPE_2>
<ENABLE_SURFACE_TYPE_3>POND</ENABLE_SURFACE_TYPE_3>
<ENABLE_SURFACE_TYPE_4>LAKE</ENABLE_SURFACE_TYPE_4>
<ENABLE_SURFACE_TYPE_5>OCEAN</ENABLE_SURFACE_TYPE_5>
<ENABLE_SURFACE_TYPE_6>WATER_FSX</ENABLE_SURFACE_TYPE_6>
</DefaultTemplateParameters>
<Component ID="FX_LANDING_GR_WATER_#FX_NODE#_#FX_CONTACT_POINT_ID#" Node="#FX_NODE#">
<UseTemplate Name="ASOBO_GT_FX">
<FX_CODE>(A:PLANE ALT ABOVE GROUND, Feet) 30000</FX_CODE>
</UseTemplate>
</Component>
</Template>
<Template Name = "ASOBO_LANDING_FX">
<UseTemplate Name="ASOBO_WET_GR_LANDING_FX">
<FX_CONTACT_POINT_ID>0</FX_CONTACT_POINT_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_WET_GR_LANDING_FX">
<FX_CONTACT_POINT_ID>1</FX_CONTACT_POINT_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_WET_GR_LANDING_FX">
<FX_CONTACT_POINT_ID>2</FX_CONTACT_POINT_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_SMOKE_GR_LANDING_FX">
<FX_CONTACT_POINT_ID>0</FX_CONTACT_POINT_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_SMOKE_GR_LANDING_FX">
<FX_CONTACT_POINT_ID>1</FX_CONTACT_POINT_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_SMOKE_GR_LANDING_FX">
<FX_CONTACT_POINT_ID>2</FX_CONTACT_POINT_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_DUST_GR_LANDING_FX">
<FX_CONTACT_POINT_ID>0</FX_CONTACT_POINT_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_DUST_GR_LANDING_FX">
<FX_CONTACT_POINT_ID>1</FX_CONTACT_POINT_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_DUST_GR_LANDING_FX">
<FX_CONTACT_POINT_ID>2</FX_CONTACT_POINT_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_GRASS_GR_LANDING_FX">
<FX_CONTACT_POINT_ID>0</FX_CONTACT_POINT_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_GRASS_GR_LANDING_FX">
<FX_CONTACT_POINT_ID>1</FX_CONTACT_POINT_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_GRASS_GR_LANDING_FX">
<FX_CONTACT_POINT_ID>2</FX_CONTACT_POINT_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_SNOW_GR_LANDING_FX">
<FX_CONTACT_POINT_ID>0</FX_CONTACT_POINT_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_SNOW_GR_LANDING_FX">
<FX_CONTACT_POINT_ID>1</FX_CONTACT_POINT_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_SNOW_GR_LANDING_FX">
<FX_CONTACT_POINT_ID>2</FX_CONTACT_POINT_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_WATER_GR_LANDING_FX">
<FX_CONTACT_POINT_ID>0</FX_CONTACT_POINT_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_WATER_GR_LANDING_FX">
<FX_CONTACT_POINT_ID>1</FX_CONTACT_POINT_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_WATER_GR_LANDING_FX">
<FX_CONTACT_POINT_ID>2</FX_CONTACT_POINT_ID>
</UseTemplate>
</Template>
<Template Name = "ASOBO_LANDING_MD_FX">
<UseTemplate Name="ASOBO_WET_MD_GR_LANDING_FX">
<FX_CONTACT_POINT_ID>0</FX_CONTACT_POINT_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_WET_MD_GR_LANDING_FX">
<FX_CONTACT_POINT_ID>1</FX_CONTACT_POINT_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_WET_MD_GR_LANDING_FX">
<FX_CONTACT_POINT_ID>2</FX_CONTACT_POINT_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_SMOKE_MD_GR_LANDING_FX">
<FX_CONTACT_POINT_ID>0</FX_CONTACT_POINT_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_SMOKE_MD_GR_LANDING_FX">
<FX_CONTACT_POINT_ID>1</FX_CONTACT_POINT_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_SMOKE_MD_GR_LANDING_FX">
<FX_CONTACT_POINT_ID>2</FX_CONTACT_POINT_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_DUST_GR_LANDING_FX">
<FX_CONTACT_POINT_ID>0</FX_CONTACT_POINT_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_DUST_GR_LANDING_FX">
<FX_CONTACT_POINT_ID>1</FX_CONTACT_POINT_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_DUST_GR_LANDING_FX">
<FX_CONTACT_POINT_ID>2</FX_CONTACT_POINT_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_GRASS_GR_LANDING_FX">
<FX_CONTACT_POINT_ID>0</FX_CONTACT_POINT_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_GRASS_GR_LANDING_FX">
<FX_CONTACT_POINT_ID>1</FX_CONTACT_POINT_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_GRASS_GR_LANDING_FX">
<FX_CONTACT_POINT_ID>2</FX_CONTACT_POINT_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_SNOW_GR_LANDING_FX">
<FX_CONTACT_POINT_ID>0</FX_CONTACT_POINT_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_SNOW_GR_LANDING_FX">
<FX_CONTACT_POINT_ID>1</FX_CONTACT_POINT_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_SNOW_GR_LANDING_FX">
<FX_CONTACT_POINT_ID>2</FX_CONTACT_POINT_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_WATER_GR_LANDING_FX">
<FX_CONTACT_POINT_ID>0</FX_CONTACT_POINT_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_WATER_GR_LANDING_FX">
<FX_CONTACT_POINT_ID>1</FX_CONTACT_POINT_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_WATER_GR_LANDING_FX">
<FX_CONTACT_POINT_ID>2</FX_CONTACT_POINT_ID>
</UseTemplate>
</Template>
<Template Name = "ASOBO_LANDING_LG_FX">
<UseTemplate Name="ASOBO_WET_LG_GR_LANDING_FX">
<FX_CONTACT_POINT_ID>0</FX_CONTACT_POINT_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_WET_LG_GR_LANDING_FX">
<FX_CONTACT_POINT_ID>1</FX_CONTACT_POINT_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_WET_LG_GR_LANDING_FX">
<FX_CONTACT_POINT_ID>2</FX_CONTACT_POINT_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_SMOKE_LG_GR_LANDING_FX">
<FX_CONTACT_POINT_ID>0</FX_CONTACT_POINT_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_SMOKE_LG_GR_LANDING_FX">
<FX_CONTACT_POINT_ID>1</FX_CONTACT_POINT_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_SMOKE_LG_GR_LANDING_FX">
<FX_CONTACT_POINT_ID>2</FX_CONTACT_POINT_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_DUST_GR_LANDING_FX">
<FX_CONTACT_POINT_ID>0</FX_CONTACT_POINT_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_DUST_GR_LANDING_FX">
<FX_CONTACT_POINT_ID>1</FX_CONTACT_POINT_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_DUST_GR_LANDING_FX">
<FX_CONTACT_POINT_ID>2</FX_CONTACT_POINT_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_GRASS_GR_LANDING_FX">
<FX_CONTACT_POINT_ID>0</FX_CONTACT_POINT_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_GRASS_GR_LANDING_FX">
<FX_CONTACT_POINT_ID>1</FX_CONTACT_POINT_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_GRASS_GR_LANDING_FX">
<FX_CONTACT_POINT_ID>2</FX_CONTACT_POINT_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_SNOW_LG_GR_LANDING_FX">
<FX_CONTACT_POINT_ID>0</FX_CONTACT_POINT_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_SNOW_LG_GR_LANDING_FX">
<FX_CONTACT_POINT_ID>1</FX_CONTACT_POINT_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_SNOW_LG_GR_LANDING_FX">
<FX_CONTACT_POINT_ID>2</FX_CONTACT_POINT_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_WATER_GR_LANDING_FX">
<FX_CONTACT_POINT_ID>0</FX_CONTACT_POINT_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_WATER_GR_LANDING_FX">
<FX_CONTACT_POINT_ID>1</FX_CONTACT_POINT_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_WATER_GR_LANDING_FX">
<FX_CONTACT_POINT_ID>2</FX_CONTACT_POINT_ID>
</UseTemplate>
</Template>
<!-- CP-based triggers -->
<Template Name = "ASOBO_WET_CP_LANDING_FX">
<DefaultTemplateParameters>
<FX_GUID>{B2C7B9A6-8F3D-49CE-8418-64086E23C5CB}</FX_GUID>
<FX_NAME>LANDING_CP_WET</FX_NAME>
<FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID>
<FX_NODE>__NO_NODE__</FX_NODE>
<DISABLE_SURFACE_TYPE_0>RIVER</DISABLE_SURFACE_TYPE_0>
<DISABLE_SURFACE_TYPE_1>WASTE_WATER</DISABLE_SURFACE_TYPE_1>
<DISABLE_SURFACE_TYPE_2>WATER</DISABLE_SURFACE_TYPE_2>
<DISABLE_SURFACE_TYPE_3>POND</DISABLE_SURFACE_TYPE_3>
<DISABLE_SURFACE_TYPE_4>LAKE</DISABLE_SURFACE_TYPE_4>
<DISABLE_SURFACE_TYPE_5>OCEAN</DISABLE_SURFACE_TYPE_5>
<DISABLE_SURFACE_TYPE_6>WATER_FSX</DISABLE_SURFACE_TYPE_6>
</DefaultTemplateParameters>
<Component ID="FX_LANDING_CP_WET_#FX_NODE#_#FX_CONTACT_POINT_ID#" Node="#FX_NODE#">
<UseTemplate Name="ASOBO_GT_FX">
<FX_CODE>(A:CONTACT POINT IS ON GROUND:#FX_CONTACT_POINT_ID#, Keyframe) 0 > (A:GROUND VELOCITY, knot) 0.1 > and (A:SURFACE CONDITION, enum) 1 == and</FX_CODE>
</UseTemplate>
</Component>
</Template>
<Template Name = "ASOBO_WET_MD_CP_LANDING_FX">
<DefaultTemplateParameters>
<FX_GUID>{25736E7E-6F36-4046-91BC-9AFFCE737F28}</FX_GUID>
<FX_NAME>LANDING_CP_MD_WET</FX_NAME>
<FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID>
<FX_NODE>__NO_NODE__</FX_NODE>
<DISABLE_SURFACE_TYPE_0>RIVER</DISABLE_SURFACE_TYPE_0>
<DISABLE_SURFACE_TYPE_1>WASTE_WATER</DISABLE_SURFACE_TYPE_1>
<DISABLE_SURFACE_TYPE_2>WATER</DISABLE_SURFACE_TYPE_2>
<DISABLE_SURFACE_TYPE_3>POND</DISABLE_SURFACE_TYPE_3>
<DISABLE_SURFACE_TYPE_4>LAKE</DISABLE_SURFACE_TYPE_4>
<DISABLE_SURFACE_TYPE_5>OCEAN</DISABLE_SURFACE_TYPE_5>
<DISABLE_SURFACE_TYPE_6>WATER_FSX</DISABLE_SURFACE_TYPE_6>
</DefaultTemplateParameters>
<Component ID="FX_LANDING_CP_MD_WET_#FX_NODE#_#FX_CONTACT_POINT_ID#" Node="#FX_NODE#">
<UseTemplate Name="ASOBO_GT_FX">
<FX_CODE>(A:CONTACT POINT IS ON GROUND:#FX_CONTACT_POINT_ID#, Keyframe) 0 > (A:GROUND VELOCITY, knot) 0.1 > and (A:SURFACE CONDITION, enum) 1 == and</FX_CODE>
</UseTemplate>
</Component>
</Template>
<Template Name = "ASOBO_WET_LG_CP_LANDING_FX">
<DefaultTemplateParameters>
<FX_GUID>{0915D0C5-F0B3-4EAD-8D96-08FF2F6F0057}</FX_GUID>
<FX_NAME>LANDING_CP_LG_WET</FX_NAME>
<FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID>
<FX_NODE>__NO_NODE__</FX_NODE>
<DISABLE_SURFACE_TYPE_0>RIVER</DISABLE_SURFACE_TYPE_0>
<DISABLE_SURFACE_TYPE_1>WASTE_WATER</DISABLE_SURFACE_TYPE_1>
<DISABLE_SURFACE_TYPE_2>WATER</DISABLE_SURFACE_TYPE_2>
<DISABLE_SURFACE_TYPE_3>POND</DISABLE_SURFACE_TYPE_3>
<DISABLE_SURFACE_TYPE_4>LAKE</DISABLE_SURFACE_TYPE_4>
<DISABLE_SURFACE_TYPE_5>OCEAN</DISABLE_SURFACE_TYPE_5>
<DISABLE_SURFACE_TYPE_6>WATER_FSX</DISABLE_SURFACE_TYPE_6>
</DefaultTemplateParameters>
<Component ID="FX_LANDING_CP_LG_WET_#FX_NODE#_#FX_CONTACT_POINT_ID#" Node="#FX_NODE#">
<UseTemplate Name="ASOBO_GT_FX">
<FX_CODE>(A:CONTACT POINT IS ON GROUND:#FX_CONTACT_POINT_ID#, Keyframe) 0 > (A:GROUND VELOCITY, knot) 0.1 > and (A:SURFACE CONDITION, enum) 1 == and</FX_CODE>
</UseTemplate>
</Component>
</Template>
<Template Name = "ASOBO_SMOKE_CP_LANDING_FX">
<DefaultTemplateParameters>
<FX_GUID>{7E68323C-E75D-4F5B-988E-65DD4956F6BA}</FX_GUID>
<FX_NAME>LANDING_CP_SMOKE</FX_NAME>
<FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID>
<FX_NODE>__NO_NODE__</FX_NODE>
<ENABLE_SURFACE_TYPE_0>CONCRETE</ENABLE_SURFACE_TYPE_0>
<ENABLE_SURFACE_TYPE_1>ASPHALT</ENABLE_SURFACE_TYPE_1>
<ENABLE_SURFACE_TYPE_2>BITUMINUS</ENABLE_SURFACE_TYPE_2>
<ENABLE_SURFACE_TYPE_3>MACADAM</ENABLE_SURFACE_TYPE_3>
<ENABLE_SURFACE_TYPE_4>TARMAC</ENABLE_SURFACE_TYPE_4>
</DefaultTemplateParameters>
<Component ID="FX_LANDING_CP_SMOKE_#FX_NODE#_#FX_CONTACT_POINT_ID#" Node="#FX_NODE#">
<UseTemplate Name="ASOBO_GT_FX">
<FX_CODE>(A:CONTACT POINT IS ON GROUND:#FX_CONTACT_POINT_ID#, Keyframe) 0 > (A:CONTACT POINT SKIDDING FACTOR:#FX_CONTACT_POINT_ID#, knot) 0 > and (A:SURFACE CONDITION, enum) 1 != and</FX_CODE>
</UseTemplate>
</Component>
</Template>
<Template Name = "ASOBO_SMOKE_MD_CP_LANDING_FX">
<DefaultTemplateParameters>
<FX_GUID>{38428600-D14A-41A8-9FED-A7C815F89AEE}</FX_GUID>
<FX_NAME>LANDING_CP_MD_SMOKE</FX_NAME>
<FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID>
<FX_NODE>__NO_NODE__</FX_NODE>
<ENABLE_SURFACE_TYPE_0>CONCRETE</ENABLE_SURFACE_TYPE_0>
<ENABLE_SURFACE_TYPE_1>ASPHALT</ENABLE_SURFACE_TYPE_1>
<ENABLE_SURFACE_TYPE_2>BITUMINUS</ENABLE_SURFACE_TYPE_2>
<ENABLE_SURFACE_TYPE_3>MACADAM</ENABLE_SURFACE_TYPE_3>
<ENABLE_SURFACE_TYPE_4>TARMAC</ENABLE_SURFACE_TYPE_4>
</DefaultTemplateParameters>
<Component ID="FX_LANDING_CP_MD_SMOKE_#FX_NODE#_#FX_CONTACT_POINT_ID#" Node="#FX_NODE#">
<UseTemplate Name="ASOBO_GT_FX">
<FX_CODE>(A:CONTACT POINT IS ON GROUND:#FX_CONTACT_POINT_ID#, Keyframe) 0 > (A:CONTACT POINT SKIDDING FACTOR:#FX_CONTACT_POINT_ID#, knot) 0 > and (A:SURFACE CONDITION, enum) 1 != and</FX_CODE>
</UseTemplate>
</Component>
</Template>
<Template Name = "ASOBO_SMOKE_LG_CP_LANDING_FX">
<DefaultTemplateParameters>
<FX_GUID>{C9747EAE-5970-477A-81D7-2FC96CE0C3EA}</FX_GUID>
<FX_NAME>LANDING_CP_LG_SMOKE</FX_NAME>
<FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID>
<FX_NODE>__NO_NODE__</FX_NODE>
<ENABLE_SURFACE_TYPE_0>CONCRETE</ENABLE_SURFACE_TYPE_0>
<ENABLE_SURFACE_TYPE_1>ASPHALT</ENABLE_SURFACE_TYPE_1>
<ENABLE_SURFACE_TYPE_2>BITUMINUS</ENABLE_SURFACE_TYPE_2>
<ENABLE_SURFACE_TYPE_3>MACADAM</ENABLE_SURFACE_TYPE_3>
<ENABLE_SURFACE_TYPE_4>TARMAC</ENABLE_SURFACE_TYPE_4>
</DefaultTemplateParameters>
<Component ID="FX_LANDING_CP_LG_SMOKE_#FX_NODE#_#FX_CONTACT_POINT_ID#" Node="#FX_NODE#">
<UseTemplate Name="ASOBO_GT_FX">
<FX_CODE>(A:CONTACT POINT IS ON GROUND:#FX_CONTACT_POINT_ID#, Keyframe) 0 > (A:CONTACT POINT SKIDDING FACTOR:#FX_CONTACT_POINT_ID#, knot) 0 > and (A:SURFACE CONDITION, enum) 1 != and</FX_CODE>
</UseTemplate>
</Component>
</Template>
<Template Name = "ASOBO_DUST_CP_LANDING_FX">
<DefaultTemplateParameters>
<FX_GUID>{B563B75A-F2F0-4F09-8617-BE9F173BC8FB}</FX_GUID>
<FX_NAME>LANDING_CP_DUST</FX_NAME>
<FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID>
<FX_NODE>__NO_NODE__</FX_NODE>
<ENABLE_SURFACE_TYPE_0>DUST</ENABLE_SURFACE_TYPE_0>
<ENABLE_SURFACE_TYPE_1>DIRT</ENABLE_SURFACE_TYPE_1>
</DefaultTemplateParameters>
<Component ID="FX_LANDING_CP_DUST_#FX_NODE#_#FX_CONTACT_POINT_ID#" Node="#FX_NODE#">
<UseTemplate Name="ASOBO_GT_FX">
<FX_CODE>(A:CONTACT POINT IS ON GROUND:#FX_CONTACT_POINT_ID#, Keyframe) 0 > (A:GROUND VELOCITY, knot) 0.1 > and (A:SURFACE CONDITION, enum) 1 != and</FX_CODE>
</UseTemplate>
</Component>
</Template>
<Template Name = "ASOBO_GRASS_CP_LANDING_FX">
<DefaultTemplateParameters>
<FX_GUID>{F3BD2906-EF27-406B-BB55-02FF0BBCEF01}</FX_GUID>
<FX_NAME>LANDING_CP_GRASS</FX_NAME>
<FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID>
<FX_NODE>__NO_NODE__</FX_NODE>
<ENABLE_SURFACE_TYPE_0>GRASS</ENABLE_SURFACE_TYPE_0>
</DefaultTemplateParameters>
<Component ID="FX_LANDING_CP_GRASS_#FX_NODE#_#FX_CONTACT_POINT_ID#" Node="#FX_NODE#">
<UseTemplate Name="ASOBO_GT_FX">
<FX_CODE>(A:CONTACT POINT IS ON GROUND:#FX_CONTACT_POINT_ID#, Keyframe) 0 > (A:GROUND VELOCITY, knot) 0.1 > and</FX_CODE>
</UseTemplate>
</Component>
</Template>
<Template Name = "ASOBO_SNOW_CP_LANDING_FX">
<DefaultTemplateParameters>
<FX_GUID>{B9EEB6C8-D2F1-45C3-951D-033D973E18C8}</FX_GUID>
<FX_NAME>LANDING_CP_SNOW</FX_NAME>
<FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID>
<FX_NODE>__NO_NODE__</FX_NODE>
<ENABLE_SURFACE_TYPE_0>SNOW</ENABLE_SURFACE_TYPE_0>
</DefaultTemplateParameters>
<Component ID="FX_LANDING_CP_SNOW_#FX_NODE#_#FX_CONTACT_POINT_ID#" Node="#FX_NODE#">
<UseTemplate Name="ASOBO_GT_FX">
<FX_CODE>(A:CONTACT POINT IS ON GROUND:#FX_CONTACT_POINT_ID#, Keyframe) 0 > (A:GROUND VELOCITY, knot) 5 > and (A:SURFACE CONDITION, enum) 1 != and</FX_CODE>
</UseTemplate>
</Component>
</Template>
<Template Name = "ASOBO_SNOW_LG_CP_LANDING_FX">
<DefaultTemplateParameters>
<FX_GUID>{883A007E-4DEE-4D3D-8081-55CC462986CA}</FX_GUID>
<FX_NAME>LANDING_CP_LG_SNOW</FX_NAME>
<FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID>
<FX_NODE>__NO_NODE__</FX_NODE>
<ENABLE_SURFACE_TYPE_0>SNOW</ENABLE_SURFACE_TYPE_0>
</DefaultTemplateParameters>
<Component ID="FX_LANDING_CP_LG_SNOW_#FX_NODE#_#FX_CONTACT_POINT_ID#" Node="#FX_NODE#">
<UseTemplate Name="ASOBO_GT_FX">
<FX_CODE>(A:CONTACT POINT IS ON GROUND:#FX_CONTACT_POINT_ID#, Keyframe) 0 > (A:GROUND VELOCITY, knot) 5 > and (A:SURFACE CONDITION, enum) 1 != and</FX_CODE>
</UseTemplate>
</Component>
</Template>
<Template Name = "ASOBO_WATER_CP_LANDING_FX">
<DefaultTemplateParameters>
<FX_GUID>{BA223A84-9E83-4A58-B7D7-0C9CBA4E1627}</FX_GUID>
<FX_NAME>LANDING_CP_WATER</FX_NAME>
<FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID>
<FX_NODE>__NO_NODE__</FX_NODE>
<ENABLE_SURFACE_TYPE_0>RIVER</ENABLE_SURFACE_TYPE_0>
<ENABLE_SURFACE_TYPE_1>WASTE_WATER</ENABLE_SURFACE_TYPE_1>
<ENABLE_SURFACE_TYPE_2>WATER</ENABLE_SURFACE_TYPE_2>
<ENABLE_SURFACE_TYPE_3>POND</ENABLE_SURFACE_TYPE_3>
<ENABLE_SURFACE_TYPE_4>LAKE</ENABLE_SURFACE_TYPE_4>
<ENABLE_SURFACE_TYPE_5>OCEAN</ENABLE_SURFACE_TYPE_5>
<ENABLE_SURFACE_TYPE_6>WATER_FSX</ENABLE_SURFACE_TYPE_6>
</DefaultTemplateParameters>
<Component ID="FX_LANDING_CP_WATER_#FX_NODE#_#FX_CONTACT_POINT_ID#" Node="#FX_NODE#">
<UseTemplate Name="ASOBO_GT_FX">
<FX_CODE>(A:CONTACT POINT WATER DEPTH:#FX_CONTACT_POINT_ID#, Keyframe) 0 > (A:GROUND VELOCITY, knot) 5 > and</FX_CODE>
</UseTemplate>
</Component>
</Template>
<Template Name = "ASOBO_FX_EXHAUST_MD">
<DefaultTemplateParameters>
<FX_GUID>{35943419-2F02-41B4-BB27-37811ADC32CE}</FX_GUID>
<FX_NAME>FX_EXHAUST_MD</FX_NAME>
<FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID>
<FX_NODE>__NO_NODE__</FX_NODE>
</DefaultTemplateParameters>
<Component ID="FX_EXHAUST_MD_#FX_NODE#" Node="#FX_NODE#">
<UseTemplate Name="ASOBO_GT_FX">
<FX_CODE>(A:GENERAL ENG STARTER ACTIVE:1, Bool) 0 > (A:GENERAL ENG COMBUSTION:1, Bool) 0 > and</FX_CODE>
</UseTemplate>
</Component>
</Template>
<Template Name = "ASOBO_FX_PRESSURETRAIL">
<DefaultTemplateParameters>
<FX_GUID>{E78D8109-DFFC-4DF1-9A72-94982EF10629}</FX_GUID>
<FX_NAME>FX_FX_PRESSURETRAIL</FX_NAME>
<FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID>
<FX_NODE>__NO_NODE__</FX_NODE>
</DefaultTemplateParameters>
<Component ID="FX_FX_PRESSURETRAIL_#FX_NODE#" Node="#FX_NODE#">
<UseTemplate Name="ASOBO_GT_FX">
<FX_CODE>(A:GROUND VELOCITY, knot) 100 > (A:G FORCE, GForce) 2 > and</FX_CODE>
</UseTemplate>
</Component>
</Template>
<Template Name = "ASOBO_SKY_ROOT_COCKPITPLASMA_FX">
<DefaultTemplateParameters>
<FX_GUID>{055DF13A-3311-4E2C-BAD9-3B869C10F3DF}</FX_GUID>
<FX_NAME>FX_COCKPITPLASMA</FX_NAME>
<FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID>
<FX_NODE>__NO_NODE__</FX_NODE>
</DefaultTemplateParameters>
<Component ID="FX_COCKPITPLASMA_#FX_NODE#" Node="#FX_NODE#">
<UseTemplate Name="ASOBO_GT_FX">
<FX_CODE>(A:AIRSPEED MACH, mach) 7 ></FX_CODE>
</UseTemplate>
</Component>
</Template>
<Template Name = "ASOBO_WATER_NODE_LOWALTWATER_FX">
<DefaultTemplateParameters>
<FX_GUID>{422C6BE8-A423-48BA-835B-982E0C2FB32E}</FX_GUID>
<FX_NAME>FX_LOWALTWATER</FX_NAME>
<FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID>
<FX_NODE>__NO_NODE__</FX_NODE>
<ENABLE_SURFACE_TYPE_0>RIVER</ENABLE_SURFACE_TYPE_0>
<ENABLE_SURFACE_TYPE_1>WASTE_WATER</ENABLE_SURFACE_TYPE_1>
<ENABLE_SURFACE_TYPE_2>WATER</ENABLE_SURFACE_TYPE_2>
<ENABLE_SURFACE_TYPE_3>POND</ENABLE_SURFACE_TYPE_3>
<ENABLE_SURFACE_TYPE_4>LAKE</ENABLE_SURFACE_TYPE_4>
<ENABLE_SURFACE_TYPE_5>OCEAN</ENABLE_SURFACE_TYPE_5>
<ENABLE_SURFACE_TYPE_6>WATER_FSX</ENABLE_SURFACE_TYPE_6>
</DefaultTemplateParameters>
<Component ID="FX_LOWALTWATER_#FX_NODE#" Node="#FX_NODE#">
<UseTemplate Name="ASOBO_GT_FX">
</UseTemplate>
</Component>
</Template>
<Template Name = "ASOBO_SKY_NODE_VAPOURCONE_FX">
<DefaultTemplateParameters>
<FX_GUID>{8264917A-F2AB-4759-AF91-4E0C4BFBF849}</FX_GUID>
<FX_NAME>FX_VAPOURCONE</FX_NAME>
<FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID>
<FX_NODE>__NO_NODE__</FX_NODE>
</DefaultTemplateParameters>
<Component ID="FX_VAPOURCONE_#FX_NODE#" Node="#FX_NODE#">
<UseTemplate Name="ASOBO_GT_FX">
</UseTemplate>
</Component>
</Template>
<Template Name = "ASOBO_FX_WINGVAPOUR">
<DefaultTemplateParameters>
<FX_GUID>{0C2D2FFE-536B-44F7-BF26-5F205A72E283}</FX_GUID>
<FX_NAME>FX_WINGVAPOUR</FX_NAME>
<FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID>
<FX_NODE>__NO_NODE__</FX_NODE>
</DefaultTemplateParameters>
<Component ID="FX_WINGVAPOUR_#FX_NODE#" Node="#FX_NODE#">
<UseTemplate Name="ASOBO_GT_FX">
<FX_CODE>(A:GROUND VELOCITY, knot) 100 > (A:G FORCE, GForce) 2 > and</FX_CODE>
</UseTemplate>
</Component>
</Template>
<Template Name = "ASOBO_FX_DRAGTRAIL">
<DefaultTemplateParameters>
<FX_GUID>{F938513E-7D81-4D40-9057-762F8017EB1F}</FX_GUID>
<FX_NAME>FX_DRAGTRAIL</FX_NAME>
<FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID>
<FX_NODE>__NO_NODE__</FX_NODE>
</DefaultTemplateParameters>
<Component ID="FX_DRAGTRAIL_#FX_NODE#" Node="#FX_NODE#">
<UseTemplate Name="ASOBO_GT_FX">
<FX_CODE>(A:GROUND VELOCITY, knot) 100 > (A:G FORCE, GForce) 2 > and</FX_CODE>
</UseTemplate>
</Component>
</Template>
<Template Name = "ASOBO_FX_LOW_ALTITUDE_DUST">
<DefaultTemplateParameters>
<FX_GUID>{C8FB3147-D775-4CD1-AC8F-AEB717924F86}</FX_GUID>
<FX_NAME>FX_LOW_ALTITUDE_DUST</FX_NAME>
<FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID>
<FX_NODE>__NO_NODE__</FX_NODE>
<ENABLE_SURFACE_TYPE_0>DUST</ENABLE_SURFACE_TYPE_0>
<ENABLE_SURFACE_TYPE_1>SNOW</ENABLE_SURFACE_TYPE_1>
<ENABLE_SURFACE_TYPE_2>DIRT</ENABLE_SURFACE_TYPE_2>
</DefaultTemplateParameters>
<Component ID="FX_LOW_ALTITUDE_DUST_#FX_NODE#_#FX_CONTACT_POINT_ID#" Node="#FX_NODE#">
<UseTemplate Name="ASOBO_GT_FX">
<FX_CODE>(A:PLANE ALT ABOVE GROUND, Feet) 100 < (A:GENERAL ENG COMBUSTION:1, Bool) 0 > and</FX_CODE>
</UseTemplate>
</Component>
</Template>
<Template Name = "ASOBO_GROUND_CP_LOWALTITUDEDUSTFX2_FX">
<DefaultTemplateParameters>
<FX_GUID>{E0C80975-7057-4DFA-9DC1-18008B7E591C}</FX_GUID>
<FX_NAME>FX_LOW_ALTITUDE_DUST_FX2</FX_NAME>
<FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID>
<FX_NODE>__NO_NODE__</FX_NODE>
<ENABLE_SURFACE_TYPE_0>DUST</ENABLE_SURFACE_TYPE_0>
<ENABLE_SURFACE_TYPE_1>SNOW</ENABLE_SURFACE_TYPE_1>
<ENABLE_SURFACE_TYPE_2>DIRT</ENABLE_SURFACE_TYPE_2>
</DefaultTemplateParameters>
<Component ID="FX_LOW_ALTITUDE_DUST_FX2_#FX_NODE#_#FX_CONTACT_POINT_ID#" Node="#FX_NODE#">
<UseTemplate Name="ASOBO_GT_FX">
<FX_CODE>(A:PLANE ALT ABOVE GROUND, Feet) 400 < (A:AIRSPEED INDICATED, knot) 120 > and (A:PLANE PITCH DEGREES, degrees) -5 < and (A:GENERAL ENG COMBUSTION:1, Bool) 0 > and</FX_CODE>
</UseTemplate>
</Component>
</Template>
<Template Name = "ASOBO_GROUND_CP_LOWALTITUDEDUST_SUPERSONIC_FX">
<DefaultTemplateParameters>
<FX_GUID>{B46DEBE7-86DD-4E13-91E7-9EB419697E56}</FX_GUID>
<FX_NAME>FX_LOW_ALTITUDE_DUST_FX2</FX_NAME>
<FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID>
<FX_NODE>__NO_NODE__</FX_NODE>
<ENABLE_SURFACE_TYPE_0>DUST</ENABLE_SURFACE_TYPE_0>
<ENABLE_SURFACE_TYPE_1>SNOW</ENABLE_SURFACE_TYPE_1>
<ENABLE_SURFACE_TYPE_2>DIRT</ENABLE_SURFACE_TYPE_2>
</DefaultTemplateParameters>
<Component ID="FX_LOW_ALTITUDE_DUST_FX2_#FX_NODE#_#FX_CONTACT_POINT_ID#" Node="#FX_NODE#">
<UseTemplate Name="ASOBO_GT_FX">
<FX_CODE>(A:AIRSPEED MACH, mach) 0.9 ></FX_CODE>
</UseTemplate>
</Component>
</Template>
<Template Name = "ASOBO_FX_EXHAUST_HEAT">
<DefaultTemplateParameters>
<FX_GUID>{605EBB42-DA6B-4965-9199-9AE59BF7FD83}</FX_GUID>
<FX_NAME>FX_EXHAUST_HEAT</FX_NAME>
<FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID>
<FX_NODE>__NO_NODE__</FX_NODE>
</DefaultTemplateParameters>
<Component ID="FX_EXHAUST_HEAT_#FX_NODE#" Node="#FX_NODE#">
<UseTemplate Name="ASOBO_GT_FX">
<FX_CODE>(A:GENERAL ENG COMBUSTION:1, Bool) 0 ></FX_CODE>
</UseTemplate>
</Component>
</Template>
<Template Name = "ASOBO_FX_AFTERBURNER">
<Parameters Type="Default">
<FX_GUID>{4586DE45-3381-448F-937A-DF0A70DA1CB1}</FX_GUID>
<FX_NAME>FX_AFTERBURNER</FX_NAME>
<FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID>
<FX_NODE>__NO_NODE__</FX_NODE>
</Parameters>
<Component ID="FX_AFTERBURNER" Node="#FX_NODE#">
<UseTemplate Name="ASOBO_GT_FX">
</UseTemplate>
</Component>
</Template>
<Template Name = "ASOBO_FX_AFTERBURNER_DARKSTAR">
<Parameters Type="Default">
<FX_GUID>{15F7D889-4962-4AC5-B47C-E6CC1153F3C0}</FX_GUID>
<FX_NAME>FX_AFTERBURNER_DARKSTAR</FX_NAME>
<FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID>
<FX_NODE>__NO_NODE__</FX_NODE>
</Parameters>
<Component ID="FX_AFTERBURNER_DARKSTAR" Node="#FX_NODE#">
<UseTemplate Name="ASOBO_GT_FX">
</UseTemplate>
</Component>
</Template>
<Template Name = "ASOBO_FX_AFTERBURNER2">
<Parameters Type="Default">
<FX_GUID>{76EB2C5C-0331-431D-86C0-E12A0CC39A5F}</FX_GUID>
<FX_NAME>FX_AFTERBURNER2</FX_NAME>
<FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID>
<FX_NODE>__NO_NODE__</FX_NODE>
</Parameters>
<Component ID="FX_AFTERBURNER" Node="#FX_NODE#">
<UseTemplate Name="ASOBO_GT_FX">
</UseTemplate>
</Component>
</Template>
<Template Name = "ASOBO_FX_AFTERBURNER_HEAT">
<Parameters Type="Default">
<FX_GUID>{3F443329-D4EF-4CF5-B71D-BEA3E3EBF5BA}</FX_GUID>
<FX_NAME>FX_AFTERBURNER_HEAT</FX_NAME>
<FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID>
<FX_NODE>__NO_NODE__</FX_NODE>
</Parameters>
<Component ID="FX_AFTERBURNER_HEAT" Node="#FX_NODE#">
<UseTemplate Name="ASOBO_GT_FX">
</UseTemplate>
</Component>
</Template>
<Template Name = "ASOBO_FX_GLIDER_BALAST_LOW_SPEED">
<Parameters Type="Default">
<FX_GUID>{CAF32131-A4D7-4FC8-9831-83F3283C2575}</FX_GUID>
<FX_NAME>FX_GLIDER_BALAST_LOW_SPEED</FX_NAME>
<FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID>
<FX_NODE>__NO_NODE__</FX_NODE>
</Parameters>
<Component ID="FX_GLIDER_BALAST_LOW_SPEED" Node="#FX_NODE#">
<UseTemplate Name="ASOBO_GT_FX">
<FX_CODE>(A:WATER BALLAST VALVE FLOW RATE:1, gph) 0 > (A:WATER BALLAST VALVE FLOW RATE:2, gph) 0 > or (A:SIM ON GROUND, Bool) 0 > and (A:AIRSPEED TRUE, knots) 40 < and</FX_CODE>
</UseTemplate>
</Component>
</Template>
<Template Name = "ASOBO_FX_GLIDER_BALAST_HIGH_SPEED">
<Parameters Type="Default">
<FX_GUID>{AA642D83-552F-46F5-992A-6A6AB82CBF18}</FX_GUID>
<FX_NAME>FX_GLIDER_BALAST_HIGH_SPEED</FX_NAME>
<FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID>
<FX_NODE>__NO_NODE__</FX_NODE>
</Parameters>
<Component ID="FX_GLIDER_BALAST_HIGH_SPEED" Node="#FX_NODE#">
<UseTemplate Name="ASOBO_GT_FX">
<FX_CODE>(A:WATER BALLAST VALVE FLOW RATE:1, gph) 0 > (A:WATER BALLAST VALVE FLOW RATE:2, gph) 0 > or (A:AIRSPEED TRUE, knots) 40 >= and</FX_CODE>
</UseTemplate>
</Component>
</Template>
</ModelBehaviors>
Templates
Template list
- ASOBO_GT_FX
- ASOBO_CONTRAIL_QUAD_FX
- ASOBO_CONTRAIL_RIBBON_FX
- ASOBO_WET_GR_LANDING_FX
- ASOBO_WET_MD_GR_LANDING_FX
- ASOBO_WET_LG_GR_LANDING_FX
- ASOBO_SMOKE_GR_LANDING_FX
- ASOBO_SMOKE_MD_GR_LANDING_FX
- ASOBO_SMOKE_LG_GR_LANDING_FX
- ASOBO_DUST_GR_LANDING_FX
- ASOBO_GRASS_GR_LANDING_FX
- ASOBO_SNOW_GR_LANDING_FX
- ASOBO_SNOW_LG_GR_LANDING_FX
- ASOBO_WATER_GR_LANDING_FX
- ASOBO_AIRCRAFT_CARRIER_WAKE_FX
- ASOBO_WATER_NODE_FRIGATEWAKE_FX
- ASOBO_WATER_NODE_BOATWAKE_FX
- ASOBO_LANDING_FX
- ASOBO_LANDING_MD_FX
- ASOBO_LANDING_LG_FX
- ASOBO_WET_CP_LANDING_FX
- ASOBO_WET_MD_CP_LANDING_FX
- ASOBO_WET_LG_CP_LANDING_FX
- ASOBO_SMOKE_CP_LANDING_FX
- ASOBO_SMOKE_MD_CP_LANDING_FX
- ASOBO_SMOKE_LG_CP_LANDING_FX
- ASOBO_DUST_CP_LANDING_FX
- ASOBO_GRASS_CP_LANDING_FX
- ASOBO_SNOW_CP_LANDING_FX
- ASOBO_SNOW_LG_CP_LANDING_FX
- ASOBO_WATER_CP_LANDING_FX
- ASOBO_FX_EXHAUST_MD
- ASOBO_FX_PRESSURETRAIL
- ASOBO_SKY_ROOT_COCKPITPLASMA_FX
- ASOBO_WATER_NODE_LOWALTWATER_FX
- ASOBO_SKY_NODE_VAPOURCONE_FX
- ASOBO_FX_WINGVAPOUR
- ASOBO_FX_DRAGTRAIL
- ASOBO_FX_LOW_ALTITUDE_DUST
- ASOBO_GROUND_CP_LOWALTITUDEDUSTFX2_FX
- ASOBO_GROUND_CP_LOWALTITUDEDUST_SUPERSONIC_FX
- ASOBO_FX_EXHAUST_HEAT
- ASOBO_FX_AFTERBURNER
- ASOBO_FX_AFTERBURNER_DARKSTAR
- ASOBO_FX_AFTERBURNER2
- ASOBO_FX_AFTERBURNER_HEAT
- ASOBO_FX_GLIDER_BALAST_LOW_SPEED
- ASOBO_FX_GLIDER_BALAST_HIGH_SPEED
-
ASOBO_GT_FX
Definition from XML<Template Name="ASOBO_GT_FX"> <DefaultTemplateParameters> <FX_GUID/> <FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID> <FX_OFFSET_X>0.0</FX_OFFSET_X> <FX_OFFSET_Y>0.0</FX_OFFSET_Y> <FX_OFFSET_Z>0.0</FX_OFFSET_Z> <FX_ROTATION_OFFSET_P>0.0</FX_ROTATION_OFFSET_P> <FX_ROTATION_OFFSET_B>0.0</FX_ROTATION_OFFSET_B> <FX_ROTATION_OFFSET_H>0.0</FX_ROTATION_OFFSET_H> <FX_MIN_EMISSION_TIME>-1</FX_MIN_EMISSION_TIME> </DefaultTemplateParameters> <EditableTemplateParameters> <FX_GUID/> <FX_CONTACT_POINT_ID/> <FX_CODE/> <FX_OFFSET_X gizmo-node-relpos-x=""/> <FX_OFFSET_Y gizmo-node-relpos-y=""/> <FX_OFFSET_Z gizmo-node-relpos-z=""/> <FX_ROTATION_OFFSET_P gizmo-node-relrot-p=""/> <FX_ROTATION_OFFSET_B gizmo-node-relrot-b=""/> <FX_ROTATION_OFFSET_H gizmo-node-relrot-h=""/> </EditableTemplateParameters> <Condition> <Test> <Arg Valid="FX_GUID"/> </Test> <True> <FX GUID="#FX_GUID#"> <Offset> <X>#FX_OFFSET_X#</X> <Y>#FX_OFFSET_Y#</Y> <Z>#FX_OFFSET_Z#</Z> <P>#FX_ROTATION_OFFSET_P#</P> <B>#FX_ROTATION_OFFSET_B#</B> <H>#FX_ROTATION_OFFSET_H#</H> </Offset> <ContactPoint>#FX_CONTACT_POINT_ID#</ContactPoint> <Code>#FX_CODE#</Code> <MinEmissionTime>#FX_MIN_EMISSION_TIME#</MinEmissionTime> <EnableEntries> <Loop> <Setup> <Param>ID</Param> <From>0</From> <Inc>1</Inc> <While> <Arg NotEmpty="ENABLE_SURFACE_TYPE_#ID#"/> </While> </Setup> <Do> <Parameters Type="Override"> <SURFACE_TYPE_LABEL Process="Param">ENABLE_SURFACE_TYPE_#ID#</SURFACE_TYPE_LABEL> </Parameters> <SurfaceTypeEntry SurfaceType="#SURFACE_TYPE_LABEL#"/> </Do> </Loop> </EnableEntries> <DisableEntries> <Loop> <Setup> <Param>ID</Param> <From>0</From> <Inc>1</Inc> <While> <Arg NotEmpty="DISABLE_SURFACE_TYPE_#ID#"/> </While> </Setup> <Do> <Parameters Type="Override"> <SURFACE_TYPE_LABEL Process="Param">DISABLE_SURFACE_TYPE_#ID#</SURFACE_TYPE_LABEL> </Parameters> <SurfaceTypeEntry SurfaceType="#SURFACE_TYPE_LABEL#"/> </Do> </Loop> </DisableEntries> <OverrideEntries> <Loop> <Setup> <Param>ID</Param> <From>0</From> <Inc>1</Inc> <While> <And> <Arg NotEmpty="OVERRIDE_SURFACE_TYPE_#ID#"/> <Arg NotEmpty="OVERRIDE_FX_SURFACE_TYPE_GUID_#ID#"/> </And> </While> </Setup> <Do> <Parameters Type="Override"> <SURFACE_TYPE_LABEL Process="Param">OVERRIDE_SURFACE_TYPE_#ID#</SURFACE_TYPE_LABEL> <SURFACE_TYPE_FX_GUID Process="Param">OVERRIDE_FX_SURFACE_TYPE_GUID_#ID#</SURFACE_TYPE_FX_GUID> </Parameters> <SurfaceTypeFXEntry SurfaceType="#SURFACE_TYPE_LABEL#" FXGuid="#SURFACE_TYPE_FX_GUID#"/> </Do> </Loop> </OverrideEntries> <GraphParameters> <Loop> <Setup> <Param>ID</Param> <From>0</From> <Inc>1</Inc> <While> <Arg NotEmpty="FX_GRAPH_PARAM_#ID#"/> </While> </Setup> <Do> <Parameters Type="Override"> <GRAPH_PARAM_LABEL Process="Param">FX_GRAPH_PARAM_#ID#</GRAPH_PARAM_LABEL> </Parameters> <GraphParam>#GRAPH_PARAM_LABEL#</GraphParam> </Do> </Loop> </GraphParameters> </FX> </True> </Condition> </Template>Parameters initialization:
-
Default
Parameters set:
- FX_GUID
- FX_CONTACT_POINT_ID
- FX_OFFSET_X
- FX_OFFSET_Y
- FX_OFFSET_Z
- FX_ROTATION_OFFSET_P
- FX_ROTATION_OFFSET_B
- FX_ROTATION_OFFSET_H
- FX_MIN_EMISSION_TIME
Condition: Test(FX_GUID)
-
Case: True
Parameters read:
- FX_GUID
- FX_OFFSET_X
- FX_OFFSET_Y
- FX_OFFSET_Z
- FX_ROTATION_OFFSET_P
- FX_ROTATION_OFFSET_B
- FX_ROTATION_OFFSET_H
- FX_CONTACT_POINT_ID
- FX_CODE
- FX_MIN_EMISSION_TIME
- ID
- SURFACE_TYPE_LABEL
- SURFACE_TYPE_FX_GUID
- GRAPH_PARAM_LABEL
Parameters set:
- ID
- SURFACE_TYPE_LABEL (using ID)
- SURFACE_TYPE_FX_GUID (using ID)
- GRAPH_PARAM_LABEL (using ID)
-
Default
-
ASOBO_CONTRAIL_QUAD_FX
Definition from XML<Template Name="ASOBO_CONTRAIL_QUAD_FX"> <Parameters Type="Default"> <FX_GUID>{F42CE638-11EB-4FC8-B9B0-111A220D681F}</FX_GUID> <FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID> <FX_ENGINE_ID>0</FX_ENGINE_ID> <FX_OFFSET_X>0</FX_OFFSET_X> <FX_OFFSET_Y>0</FX_OFFSET_Y> <FX_OFFSET_Z>0</FX_OFFSET_Z> </Parameters> <Parameters Type="Default"> <FX_CODE>(A:CONTRAILS CONDITIONS MET:#FX_ENGINE_ID#, Bool) (A:GENERAL ENG COMBUSTION:#FX_ENGINE_ID#, Bool) and</FX_CODE> </Parameters> <Component ID="FX_CONTRAIL_QUAD_#FX_NODE#" Node="#FX_NODE#"> <UseTemplate Name="ASOBO_GT_FX"/> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- FX_GUID
- FX_CONTACT_POINT_ID
- FX_ENGINE_ID
- FX_OFFSET_X
- FX_OFFSET_Y
- FX_OFFSET_Z
-
Default
Parameters set:
- FX_CODE (using FX_ENGINE_ID)
Parameters read:
- FX_NODE
Components:
-
FX_CONTRAIL_QUAD_#FX_NODE# (Node: #FX_NODE#)
Templates used:
-
Default
-
ASOBO_CONTRAIL_RIBBON_FX
Definition from XML<Template Name="ASOBO_CONTRAIL_RIBBON_FX"> <Parameters Type="Default"> <FX_GUID>{904EC2CE-F8DD-4480-99E7-B33F7CF6E114}</FX_GUID> <FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID> <FX_ENGINE_ID>0</FX_ENGINE_ID> <FX_OFFSET_X>0</FX_OFFSET_X> <FX_OFFSET_Y>0</FX_OFFSET_Y> <FX_OFFSET_Z>0</FX_OFFSET_Z> </Parameters> <Parameters Type="Default"> <FX_CODE>(A:CONTRAILS CONDITIONS MET:#FX_ENGINE_ID#, Bool) (A:GENERAL ENG COMBUSTION:#FX_ENGINE_ID#, Bool) and</FX_CODE> </Parameters> <Component ID="FX_CONTRAIL_RIBBON_#FX_NODE#" Node="#FX_NODE#"> <UseTemplate Name="ASOBO_GT_FX"/> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- FX_GUID
- FX_CONTACT_POINT_ID
- FX_ENGINE_ID
- FX_OFFSET_X
- FX_OFFSET_Y
- FX_OFFSET_Z
-
Default
Parameters set:
- FX_CODE (using FX_ENGINE_ID)
Parameters read:
- FX_NODE
Components:
-
FX_CONTRAIL_RIBBON_#FX_NODE# (Node: #FX_NODE#)
Templates used:
-
Default
-
ASOBO_WET_GR_LANDING_FX
Definition from XML<Template Name="ASOBO_WET_GR_LANDING_FX"> <DefaultTemplateParameters> <FX_GUID>{B2C7B9A6-8F3D-49CE-8418-64086E23C5CB}</FX_GUID> <FX_NAME>LANDING_GR_WET</FX_NAME> <FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID> <FX_NODE>__NO_NODE__</FX_NODE> <DISABLE_SURFACE_TYPE_0>RIVER</DISABLE_SURFACE_TYPE_0> <DISABLE_SURFACE_TYPE_1>WASTE_WATER</DISABLE_SURFACE_TYPE_1> <DISABLE_SURFACE_TYPE_2>WATER</DISABLE_SURFACE_TYPE_2> <DISABLE_SURFACE_TYPE_3>POND</DISABLE_SURFACE_TYPE_3> <DISABLE_SURFACE_TYPE_4>LAKE</DISABLE_SURFACE_TYPE_4> <DISABLE_SURFACE_TYPE_5>OCEAN</DISABLE_SURFACE_TYPE_5> <DISABLE_SURFACE_TYPE_6>WATER_FSX</DISABLE_SURFACE_TYPE_6> </DefaultTemplateParameters> <Component ID="FX_LANDING_GR_WET_#FX_NODE#_#FX_CONTACT_POINT_ID#" Node="#FX_NODE#"> <UseTemplate Name="ASOBO_GT_FX"> <FX_CODE>(A:GEAR IS ON GROUND:#FX_CONTACT_POINT_ID#, Keyframe) 0 > (A:GROUND VELOCITY, knot) 0.1 > and (A:SURFACE CONDITION, enum) 1 == and</FX_CODE> </UseTemplate> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- FX_GUID
- FX_NAME
- FX_CONTACT_POINT_ID
- FX_NODE
- DISABLE_SURFACE_TYPE_0
- DISABLE_SURFACE_TYPE_1
- DISABLE_SURFACE_TYPE_2
- DISABLE_SURFACE_TYPE_3
- DISABLE_SURFACE_TYPE_4
- DISABLE_SURFACE_TYPE_5
- DISABLE_SURFACE_TYPE_6
Parameters read:
- FX_NODE
- FX_CONTACT_POINT_ID
Components:
-
FX_LANDING_GR_WET_#FX_NODE#_#FX_CONTACT_POINT_ID# (Node: #FX_NODE#)
Templates used:
-
ASOBO_GT_FX
Parameters set:
- FX_CODE (using FX_CONTACT_POINT_ID)
-
ASOBO_GT_FX
-
Default
-
ASOBO_WET_MD_GR_LANDING_FX
Definition from XML<Template Name="ASOBO_WET_MD_GR_LANDING_FX"> <DefaultTemplateParameters> <FX_GUID>{25736E7E-6F36-4046-91BC-9AFFCE737F28}</FX_GUID> <FX_NAME>LANDING_GR_MD_WET</FX_NAME> <FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID> <FX_NODE>__NO_NODE__</FX_NODE> <DISABLE_SURFACE_TYPE_0>RIVER</DISABLE_SURFACE_TYPE_0> <DISABLE_SURFACE_TYPE_1>WASTE_WATER</DISABLE_SURFACE_TYPE_1> <DISABLE_SURFACE_TYPE_2>WATER</DISABLE_SURFACE_TYPE_2> <DISABLE_SURFACE_TYPE_3>POND</DISABLE_SURFACE_TYPE_3> <DISABLE_SURFACE_TYPE_4>LAKE</DISABLE_SURFACE_TYPE_4> <DISABLE_SURFACE_TYPE_5>OCEAN</DISABLE_SURFACE_TYPE_5> <DISABLE_SURFACE_TYPE_6>WATER_FSX</DISABLE_SURFACE_TYPE_6> </DefaultTemplateParameters> <Component ID="FX_LANDING_GR_MD_WET_#FX_NODE#_#FX_CONTACT_POINT_ID#" Node="#FX_NODE#"> <UseTemplate Name="ASOBO_GT_FX"> <FX_CODE>(A:GEAR IS ON GROUND:#FX_CONTACT_POINT_ID#, Keyframe) 0 > (A:GROUND VELOCITY, knot) 0.1 > and (A:SURFACE CONDITION, enum) 1 == and</FX_CODE> </UseTemplate> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- FX_GUID
- FX_NAME
- FX_CONTACT_POINT_ID
- FX_NODE
- DISABLE_SURFACE_TYPE_0
- DISABLE_SURFACE_TYPE_1
- DISABLE_SURFACE_TYPE_2
- DISABLE_SURFACE_TYPE_3
- DISABLE_SURFACE_TYPE_4
- DISABLE_SURFACE_TYPE_5
- DISABLE_SURFACE_TYPE_6
Parameters read:
- FX_NODE
- FX_CONTACT_POINT_ID
Components:
-
FX_LANDING_GR_MD_WET_#FX_NODE#_#FX_CONTACT_POINT_ID# (Node: #FX_NODE#)
Templates used:
-
ASOBO_GT_FX
Parameters set:
- FX_CODE (using FX_CONTACT_POINT_ID)
-
ASOBO_GT_FX
-
Default
-
ASOBO_WET_LG_GR_LANDING_FX
Definition from XML<Template Name="ASOBO_WET_LG_GR_LANDING_FX"> <DefaultTemplateParameters> <FX_GUID>{0915D0C5-F0B3-4EAD-8D96-08FF2F6F0057}</FX_GUID> <FX_NAME>LANDING_GR_LG_WET</FX_NAME> <FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID> <FX_NODE>__NO_NODE__</FX_NODE> <DISABLE_SURFACE_TYPE_0>RIVER</DISABLE_SURFACE_TYPE_0> <DISABLE_SURFACE_TYPE_1>WASTE_WATER</DISABLE_SURFACE_TYPE_1> <DISABLE_SURFACE_TYPE_2>WATER</DISABLE_SURFACE_TYPE_2> <DISABLE_SURFACE_TYPE_3>POND</DISABLE_SURFACE_TYPE_3> <DISABLE_SURFACE_TYPE_4>LAKE</DISABLE_SURFACE_TYPE_4> <DISABLE_SURFACE_TYPE_5>OCEAN</DISABLE_SURFACE_TYPE_5> <DISABLE_SURFACE_TYPE_6>WATER_FSX</DISABLE_SURFACE_TYPE_6> </DefaultTemplateParameters> <Component ID="FX_LANDING_GR_LG_WET_#FX_NODE#_#FX_CONTACT_POINT_ID#" Node="#FX_NODE#"> <UseTemplate Name="ASOBO_GT_FX"> <FX_CODE>(A:GEAR IS ON GROUND:#FX_CONTACT_POINT_ID#, Keyframe) 0 > (A:GROUND VELOCITY, knot) 0.1 > and (A:SURFACE CONDITION, enum) 1 == and</FX_CODE> </UseTemplate> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- FX_GUID
- FX_NAME
- FX_CONTACT_POINT_ID
- FX_NODE
- DISABLE_SURFACE_TYPE_0
- DISABLE_SURFACE_TYPE_1
- DISABLE_SURFACE_TYPE_2
- DISABLE_SURFACE_TYPE_3
- DISABLE_SURFACE_TYPE_4
- DISABLE_SURFACE_TYPE_5
- DISABLE_SURFACE_TYPE_6
Parameters read:
- FX_NODE
- FX_CONTACT_POINT_ID
Components:
-
FX_LANDING_GR_LG_WET_#FX_NODE#_#FX_CONTACT_POINT_ID# (Node: #FX_NODE#)
Templates used:
-
ASOBO_GT_FX
Parameters set:
- FX_CODE (using FX_CONTACT_POINT_ID)
-
ASOBO_GT_FX
-
Default
-
ASOBO_SMOKE_GR_LANDING_FX
Definition from XML<Template Name="ASOBO_SMOKE_GR_LANDING_FX"> <DefaultTemplateParameters> <FX_GUID>{7E68323C-E75D-4F5B-988E-65DD4956F6BA}</FX_GUID> <FX_NAME>LANDING_GR_SMOKE</FX_NAME> <FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID> <FX_NODE>__NO_NODE__</FX_NODE> <ENABLE_SURFACE_TYPE_0>CONCRETE</ENABLE_SURFACE_TYPE_0> <ENABLE_SURFACE_TYPE_1>ASPHALT</ENABLE_SURFACE_TYPE_1> <ENABLE_SURFACE_TYPE_2>BITUMINUS</ENABLE_SURFACE_TYPE_2> <ENABLE_SURFACE_TYPE_3>MACADAM</ENABLE_SURFACE_TYPE_3> <ENABLE_SURFACE_TYPE_4>TARMAC</ENABLE_SURFACE_TYPE_4> </DefaultTemplateParameters> <Component ID="FX_LANDING_GR_SMOKE_#FX_NODE#_#FX_CONTACT_POINT_ID#" Node="#FX_NODE#"> <UseTemplate Name="ASOBO_GT_FX"> <FX_CODE>(A:GEAR IS ON GROUND:#FX_CONTACT_POINT_ID#, Keyframe) 0 > (A:GEAR SKIDDING FACTOR:#FX_CONTACT_POINT_ID#, Keyframe) 0 > and (A:SURFACE CONDITION, enum) 1 != and</FX_CODE> </UseTemplate> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- FX_GUID
- FX_NAME
- FX_CONTACT_POINT_ID
- FX_NODE
- ENABLE_SURFACE_TYPE_0
- ENABLE_SURFACE_TYPE_1
- ENABLE_SURFACE_TYPE_2
- ENABLE_SURFACE_TYPE_3
- ENABLE_SURFACE_TYPE_4
Parameters read:
- FX_NODE
- FX_CONTACT_POINT_ID
Components:
-
FX_LANDING_GR_SMOKE_#FX_NODE#_#FX_CONTACT_POINT_ID# (Node: #FX_NODE#)
Templates used:
-
ASOBO_GT_FX
Parameters set:
- FX_CODE (using FX_CONTACT_POINT_ID)
-
ASOBO_GT_FX
-
Default
-
ASOBO_SMOKE_MD_GR_LANDING_FX
Definition from XML<Template Name="ASOBO_SMOKE_MD_GR_LANDING_FX"> <DefaultTemplateParameters> <FX_GUID>{38428600-D14A-41A8-9FED-A7C815F89AEE}</FX_GUID> <FX_NAME>LANDING_GR_MD_SMOKE</FX_NAME> <FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID> <FX_NODE>__NO_NODE__</FX_NODE> <ENABLE_SURFACE_TYPE_0>CONCRETE</ENABLE_SURFACE_TYPE_0> <ENABLE_SURFACE_TYPE_1>ASPHALT</ENABLE_SURFACE_TYPE_1> <ENABLE_SURFACE_TYPE_2>BITUMINUS</ENABLE_SURFACE_TYPE_2> <ENABLE_SURFACE_TYPE_3>MACADAM</ENABLE_SURFACE_TYPE_3> <ENABLE_SURFACE_TYPE_4>TARMAC</ENABLE_SURFACE_TYPE_4> </DefaultTemplateParameters> <Component ID="FX_LANDING_GR_MD_SMOKE_#FX_NODE#_#FX_CONTACT_POINT_ID#" Node="#FX_NODE#"> <UseTemplate Name="ASOBO_GT_FX"> <FX_CODE>(A:GEAR IS ON GROUND:#FX_CONTACT_POINT_ID#, Keyframe) 0 > (A:GEAR SKIDDING FACTOR:#FX_CONTACT_POINT_ID#, Keyframe) 0 > and (A:SURFACE CONDITION, enum) 1 != and</FX_CODE> </UseTemplate> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- FX_GUID
- FX_NAME
- FX_CONTACT_POINT_ID
- FX_NODE
- ENABLE_SURFACE_TYPE_0
- ENABLE_SURFACE_TYPE_1
- ENABLE_SURFACE_TYPE_2
- ENABLE_SURFACE_TYPE_3
- ENABLE_SURFACE_TYPE_4
Parameters read:
- FX_NODE
- FX_CONTACT_POINT_ID
Components:
-
FX_LANDING_GR_MD_SMOKE_#FX_NODE#_#FX_CONTACT_POINT_ID# (Node: #FX_NODE#)
Templates used:
-
ASOBO_GT_FX
Parameters set:
- FX_CODE (using FX_CONTACT_POINT_ID)
-
ASOBO_GT_FX
-
Default
-
ASOBO_SMOKE_LG_GR_LANDING_FX
Definition from XML<Template Name="ASOBO_SMOKE_LG_GR_LANDING_FX"> <DefaultTemplateParameters> <FX_GUID>{C9747EAE-5970-477A-81D7-2FC96CE0C3EA}</FX_GUID> <FX_NAME>LANDING_GR_LG_SMOKE</FX_NAME> <FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID> <FX_NODE>__NO_NODE__</FX_NODE> <ENABLE_SURFACE_TYPE_0>CONCRETE</ENABLE_SURFACE_TYPE_0> <ENABLE_SURFACE_TYPE_1>ASPHALT</ENABLE_SURFACE_TYPE_1> <ENABLE_SURFACE_TYPE_2>BITUMINUS</ENABLE_SURFACE_TYPE_2> <ENABLE_SURFACE_TYPE_3>MACADAM</ENABLE_SURFACE_TYPE_3> <ENABLE_SURFACE_TYPE_4>TARMAC</ENABLE_SURFACE_TYPE_4> </DefaultTemplateParameters> <Component ID="FX_LANDING_GR_LG_SMOKE_#FX_NODE#_#FX_CONTACT_POINT_ID#" Node="#FX_NODE#"> <UseTemplate Name="ASOBO_GT_FX"> <FX_CODE>(A:GEAR IS ON GROUND:#FX_CONTACT_POINT_ID#, Keyframe) 0 > (A:GEAR SKIDDING FACTOR:#FX_CONTACT_POINT_ID#, Keyframe) 0 > and (A:SURFACE CONDITION, enum) 1 != and</FX_CODE> </UseTemplate> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- FX_GUID
- FX_NAME
- FX_CONTACT_POINT_ID
- FX_NODE
- ENABLE_SURFACE_TYPE_0
- ENABLE_SURFACE_TYPE_1
- ENABLE_SURFACE_TYPE_2
- ENABLE_SURFACE_TYPE_3
- ENABLE_SURFACE_TYPE_4
Parameters read:
- FX_NODE
- FX_CONTACT_POINT_ID
Components:
-
FX_LANDING_GR_LG_SMOKE_#FX_NODE#_#FX_CONTACT_POINT_ID# (Node: #FX_NODE#)
Templates used:
-
ASOBO_GT_FX
Parameters set:
- FX_CODE (using FX_CONTACT_POINT_ID)
-
ASOBO_GT_FX
-
Default
-
ASOBO_DUST_GR_LANDING_FX
Definition from XML<Template Name="ASOBO_DUST_GR_LANDING_FX"> <DefaultTemplateParameters> <FX_GUID>{B563B75A-F2F0-4F09-8617-BE9F173BC8FB}</FX_GUID> <FX_NAME>LANDING_GR_DUST</FX_NAME> <FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID> <FX_NODE>__NO_NODE__</FX_NODE> <ENABLE_SURFACE_TYPE_0>SAND</ENABLE_SURFACE_TYPE_0> <ENABLE_SURFACE_TYPE_1>DIRT</ENABLE_SURFACE_TYPE_1> </DefaultTemplateParameters> <Component ID="FX_LANDING_GR_DUST_#FX_NODE#_#FX_CONTACT_POINT_ID#" Node="#FX_NODE#"> <UseTemplate Name="ASOBO_GT_FX"> <FX_CODE>(A:GEAR IS ON GROUND:#FX_CONTACT_POINT_ID#, Keyframe) 0 > (A:GROUND VELOCITY, knot) 0.1 > and (A:SURFACE CONDITION, enum) 1 != and</FX_CODE> </UseTemplate> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- FX_GUID
- FX_NAME
- FX_CONTACT_POINT_ID
- FX_NODE
- ENABLE_SURFACE_TYPE_0
- ENABLE_SURFACE_TYPE_1
Parameters read:
- FX_NODE
- FX_CONTACT_POINT_ID
Components:
-
FX_LANDING_GR_DUST_#FX_NODE#_#FX_CONTACT_POINT_ID# (Node: #FX_NODE#)
Templates used:
-
ASOBO_GT_FX
Parameters set:
- FX_CODE (using FX_CONTACT_POINT_ID)
-
ASOBO_GT_FX
-
Default
-
ASOBO_GRASS_GR_LANDING_FX
Definition from XML<Template Name="ASOBO_GRASS_GR_LANDING_FX"> <DefaultTemplateParameters> <FX_GUID>{F3BD2906-EF27-406B-BB55-02FF0BBCEF01}</FX_GUID> <FX_NAME>LANDING_GR_GRASS</FX_NAME> <FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID> <FX_NODE>__NO_NODE__</FX_NODE> <ENABLE_SURFACE_TYPE_0>GRASS</ENABLE_SURFACE_TYPE_0> </DefaultTemplateParameters> <Component ID="FX_LANDING_GR_GRASS_#FX_NODE#_#FX_CONTACT_POINT_ID#" Node="#FX_NODE#"> <UseTemplate Name="ASOBO_GT_FX"> <FX_CODE>(A:GEAR IS ON GROUND:#FX_CONTACT_POINT_ID#, Keyframe) 0 > (A:GROUND VELOCITY, knot) 0.1 > and</FX_CODE> </UseTemplate> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- FX_GUID
- FX_NAME
- FX_CONTACT_POINT_ID
- FX_NODE
- ENABLE_SURFACE_TYPE_0
Parameters read:
- FX_NODE
- FX_CONTACT_POINT_ID
Components:
-
FX_LANDING_GR_GRASS_#FX_NODE#_#FX_CONTACT_POINT_ID# (Node: #FX_NODE#)
Templates used:
-
ASOBO_GT_FX
Parameters set:
- FX_CODE (using FX_CONTACT_POINT_ID)
-
ASOBO_GT_FX
-
Default
-
ASOBO_SNOW_GR_LANDING_FX
Definition from XML<Template Name="ASOBO_SNOW_GR_LANDING_FX"> <DefaultTemplateParameters> <FX_GUID>{B9EEB6C8-D2F1-45C3-951D-033D973E18C8}</FX_GUID> <FX_NAME>LANDING_GR_SNOW</FX_NAME> <FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID> <FX_NODE>__NO_NODE__</FX_NODE> <ENABLE_SURFACE_TYPE_0>SNOW</ENABLE_SURFACE_TYPE_0> </DefaultTemplateParameters> <Component ID="FX_LANDING_GR_SNOW_#FX_NODE#_#FX_CONTACT_POINT_ID#" Node="#FX_NODE#"> <UseTemplate Name="ASOBO_GT_FX"> <FX_CODE>(A:GEAR IS ON GROUND:#FX_CONTACT_POINT_ID#, Keyframe) 0 > (A:GROUND VELOCITY, knot) 5 > and (A:SURFACE CONDITION, enum) 1 != and</FX_CODE> </UseTemplate> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- FX_GUID
- FX_NAME
- FX_CONTACT_POINT_ID
- FX_NODE
- ENABLE_SURFACE_TYPE_0
Parameters read:
- FX_NODE
- FX_CONTACT_POINT_ID
Components:
-
FX_LANDING_GR_SNOW_#FX_NODE#_#FX_CONTACT_POINT_ID# (Node: #FX_NODE#)
Templates used:
-
ASOBO_GT_FX
Parameters set:
- FX_CODE (using FX_CONTACT_POINT_ID)
-
ASOBO_GT_FX
-
Default
-
ASOBO_SNOW_LG_GR_LANDING_FX
Definition from XML<Template Name="ASOBO_SNOW_LG_GR_LANDING_FX"> <DefaultTemplateParameters> <FX_GUID>{883A007E-4DEE-4D3D-8081-55CC462986CA}</FX_GUID> <FX_NAME>LANDING_GR_LG_SNOW</FX_NAME> <FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID> <FX_NODE>__NO_NODE__</FX_NODE> <ENABLE_SURFACE_TYPE_0>SNOW</ENABLE_SURFACE_TYPE_0> </DefaultTemplateParameters> <Component ID="FX_LANDING_GR_LG_SNOW_#FX_NODE#_#FX_CONTACT_POINT_ID#" Node="#FX_NODE#"> <UseTemplate Name="ASOBO_GT_FX"> <FX_CODE>(A:GEAR IS ON GROUND:#FX_CONTACT_POINT_ID#, Keyframe) 0 > (A:GROUND VELOCITY, knot) 5 > and (A:SURFACE CONDITION, enum) 1 != and</FX_CODE> </UseTemplate> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- FX_GUID
- FX_NAME
- FX_CONTACT_POINT_ID
- FX_NODE
- ENABLE_SURFACE_TYPE_0
Parameters read:
- FX_NODE
- FX_CONTACT_POINT_ID
Components:
-
FX_LANDING_GR_LG_SNOW_#FX_NODE#_#FX_CONTACT_POINT_ID# (Node: #FX_NODE#)
Templates used:
-
ASOBO_GT_FX
Parameters set:
- FX_CODE (using FX_CONTACT_POINT_ID)
-
ASOBO_GT_FX
-
Default
-
ASOBO_WATER_GR_LANDING_FX
Definition from XML<Template Name="ASOBO_WATER_GR_LANDING_FX"> <DefaultTemplateParameters> <FX_GUID>{BA223A84-9E83-4A58-B7D7-0C9CBA4E1627}</FX_GUID> <FX_NAME>LANDING_GR_WATER</FX_NAME> <FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID> <FX_NODE>__NO_NODE__</FX_NODE> <ENABLE_SURFACE_TYPE_0>RIVER</ENABLE_SURFACE_TYPE_0> <ENABLE_SURFACE_TYPE_1>WASTE_WATER</ENABLE_SURFACE_TYPE_1> <ENABLE_SURFACE_TYPE_2>WATER</ENABLE_SURFACE_TYPE_2> <ENABLE_SURFACE_TYPE_3>POND</ENABLE_SURFACE_TYPE_3> <ENABLE_SURFACE_TYPE_4>LAKE</ENABLE_SURFACE_TYPE_4> <ENABLE_SURFACE_TYPE_5>OCEAN</ENABLE_SURFACE_TYPE_5> <ENABLE_SURFACE_TYPE_6>WATER_FSX</ENABLE_SURFACE_TYPE_6> </DefaultTemplateParameters> <Component ID="FX_LANDING_GR_WATER_#FX_NODE#_#FX_CONTACT_POINT_ID#" Node="#FX_NODE#"> <UseTemplate Name="ASOBO_GT_FX"> <FX_CODE>(A:GEAR WATER DEPTH:#FX_CONTACT_POINT_ID#, Keyframe) 0 > (A:GROUND VELOCITY, knot) 5 > and</FX_CODE> </UseTemplate> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- FX_GUID
- FX_NAME
- FX_CONTACT_POINT_ID
- FX_NODE
- ENABLE_SURFACE_TYPE_0
- ENABLE_SURFACE_TYPE_1
- ENABLE_SURFACE_TYPE_2
- ENABLE_SURFACE_TYPE_3
- ENABLE_SURFACE_TYPE_4
- ENABLE_SURFACE_TYPE_5
- ENABLE_SURFACE_TYPE_6
Parameters read:
- FX_NODE
- FX_CONTACT_POINT_ID
Components:
-
FX_LANDING_GR_WATER_#FX_NODE#_#FX_CONTACT_POINT_ID# (Node: #FX_NODE#)
Templates used:
-
ASOBO_GT_FX
Parameters set:
- FX_CODE (using FX_CONTACT_POINT_ID)
-
ASOBO_GT_FX
-
Default
-
ASOBO_AIRCRAFT_CARRIER_WAKE_FX
Definition from XML<Template Name="ASOBO_AIRCRAFT_CARRIER_WAKE_FX"> <DefaultTemplateParameters> <FX_GUID>{62B8CED1-7510-4FCF-A356-AD19C7C92C6A}</FX_GUID> <FX_NAME>LANDING_GR_WATER</FX_NAME> <FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID> <FX_NODE>__NO_NODE__</FX_NODE> <ENABLE_SURFACE_TYPE_0>RIVER</ENABLE_SURFACE_TYPE_0> <ENABLE_SURFACE_TYPE_1>WASTE_WATER</ENABLE_SURFACE_TYPE_1> <ENABLE_SURFACE_TYPE_2>WATER</ENABLE_SURFACE_TYPE_2> <ENABLE_SURFACE_TYPE_3>POND</ENABLE_SURFACE_TYPE_3> <ENABLE_SURFACE_TYPE_4>LAKE</ENABLE_SURFACE_TYPE_4> <ENABLE_SURFACE_TYPE_5>OCEAN</ENABLE_SURFACE_TYPE_5> <ENABLE_SURFACE_TYPE_6>WATER_FSX</ENABLE_SURFACE_TYPE_6> </DefaultTemplateParameters> <Component ID="FX_LANDING_GR_WATER_#FX_NODE#_#FX_CONTACT_POINT_ID#" Node="#FX_NODE#"> <UseTemplate Name="ASOBO_GT_FX"> <FX_CODE>(A:PLANE ALT ABOVE GROUND, Feet) 30000 <</FX_CODE> </UseTemplate> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- FX_GUID
- FX_NAME
- FX_CONTACT_POINT_ID
- FX_NODE
- ENABLE_SURFACE_TYPE_0
- ENABLE_SURFACE_TYPE_1
- ENABLE_SURFACE_TYPE_2
- ENABLE_SURFACE_TYPE_3
- ENABLE_SURFACE_TYPE_4
- ENABLE_SURFACE_TYPE_5
- ENABLE_SURFACE_TYPE_6
Parameters read:
- FX_NODE
- FX_CONTACT_POINT_ID
Components:
-
FX_LANDING_GR_WATER_#FX_NODE#_#FX_CONTACT_POINT_ID# (Node: #FX_NODE#)
Templates used:
-
ASOBO_GT_FX
Parameters set:
- FX_CODE
-
ASOBO_GT_FX
-
Default
-
ASOBO_WATER_NODE_FRIGATEWAKE_FX
Definition from XML<Template Name="ASOBO_WATER_NODE_FRIGATEWAKE_FX"> <DefaultTemplateParameters> <FX_GUID>{43962C0A-B1C7-448C-9268-1DFD020623F0}</FX_GUID> <FX_NAME>LANDING_GR_WATER</FX_NAME> <FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID> <FX_NODE>__NO_NODE__</FX_NODE> <ENABLE_SURFACE_TYPE_0>RIVER</ENABLE_SURFACE_TYPE_0> <ENABLE_SURFACE_TYPE_1>WASTE_WATER</ENABLE_SURFACE_TYPE_1> <ENABLE_SURFACE_TYPE_2>WATER</ENABLE_SURFACE_TYPE_2> <ENABLE_SURFACE_TYPE_3>POND</ENABLE_SURFACE_TYPE_3> <ENABLE_SURFACE_TYPE_4>LAKE</ENABLE_SURFACE_TYPE_4> <ENABLE_SURFACE_TYPE_5>OCEAN</ENABLE_SURFACE_TYPE_5> <ENABLE_SURFACE_TYPE_6>WATER_FSX</ENABLE_SURFACE_TYPE_6> </DefaultTemplateParameters> <Component ID="FX_LANDING_GR_WATER_#FX_NODE#_#FX_CONTACT_POINT_ID#" Node="#FX_NODE#"> <UseTemplate Name="ASOBO_GT_FX"> <FX_CODE>(A:PLANE ALT ABOVE GROUND, Feet) 30000</FX_CODE> </UseTemplate> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- FX_GUID
- FX_NAME
- FX_CONTACT_POINT_ID
- FX_NODE
- ENABLE_SURFACE_TYPE_0
- ENABLE_SURFACE_TYPE_1
- ENABLE_SURFACE_TYPE_2
- ENABLE_SURFACE_TYPE_3
- ENABLE_SURFACE_TYPE_4
- ENABLE_SURFACE_TYPE_5
- ENABLE_SURFACE_TYPE_6
Parameters read:
- FX_NODE
- FX_CONTACT_POINT_ID
Components:
-
FX_LANDING_GR_WATER_#FX_NODE#_#FX_CONTACT_POINT_ID# (Node: #FX_NODE#)
Templates used:
-
ASOBO_GT_FX
Parameters set:
- FX_CODE
-
ASOBO_GT_FX
-
Default
-
ASOBO_WATER_NODE_BOATWAKE_FX
Definition from XML<Template Name="ASOBO_WATER_NODE_BOATWAKE_FX"> <DefaultTemplateParameters> <FX_GUID>{4D375088-1A82-48C5-BD7F-09D28186C9B6}</FX_GUID> <FX_NAME>BOATWAKE_FX</FX_NAME> <FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID> <FX_NODE>__NO_NODE__</FX_NODE> <ENABLE_SURFACE_TYPE_0>RIVER</ENABLE_SURFACE_TYPE_0> <ENABLE_SURFACE_TYPE_1>WASTE_WATER</ENABLE_SURFACE_TYPE_1> <ENABLE_SURFACE_TYPE_2>WATER</ENABLE_SURFACE_TYPE_2> <ENABLE_SURFACE_TYPE_3>POND</ENABLE_SURFACE_TYPE_3> <ENABLE_SURFACE_TYPE_4>LAKE</ENABLE_SURFACE_TYPE_4> <ENABLE_SURFACE_TYPE_5>OCEAN</ENABLE_SURFACE_TYPE_5> <ENABLE_SURFACE_TYPE_6>WATER_FSX</ENABLE_SURFACE_TYPE_6> </DefaultTemplateParameters> <Component ID="FX_LANDING_GR_WATER_#FX_NODE#_#FX_CONTACT_POINT_ID#" Node="#FX_NODE#"> <UseTemplate Name="ASOBO_GT_FX"> <FX_CODE>(A:PLANE ALT ABOVE GROUND, Feet) 30000</FX_CODE> </UseTemplate> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- FX_GUID
- FX_NAME
- FX_CONTACT_POINT_ID
- FX_NODE
- ENABLE_SURFACE_TYPE_0
- ENABLE_SURFACE_TYPE_1
- ENABLE_SURFACE_TYPE_2
- ENABLE_SURFACE_TYPE_3
- ENABLE_SURFACE_TYPE_4
- ENABLE_SURFACE_TYPE_5
- ENABLE_SURFACE_TYPE_6
Parameters read:
- FX_NODE
- FX_CONTACT_POINT_ID
Components:
-
FX_LANDING_GR_WATER_#FX_NODE#_#FX_CONTACT_POINT_ID# (Node: #FX_NODE#)
Templates used:
-
ASOBO_GT_FX
Parameters set:
- FX_CODE
-
ASOBO_GT_FX
-
Default
-
ASOBO_LANDING_FX
Definition from XML<Template Name="ASOBO_LANDING_FX"> <UseTemplate Name="ASOBO_WET_GR_LANDING_FX"> <FX_CONTACT_POINT_ID>0</FX_CONTACT_POINT_ID> </UseTemplate> <UseTemplate Name="ASOBO_WET_GR_LANDING_FX"> <FX_CONTACT_POINT_ID>1</FX_CONTACT_POINT_ID> </UseTemplate> <UseTemplate Name="ASOBO_WET_GR_LANDING_FX"> <FX_CONTACT_POINT_ID>2</FX_CONTACT_POINT_ID> </UseTemplate> <UseTemplate Name="ASOBO_SMOKE_GR_LANDING_FX"> <FX_CONTACT_POINT_ID>0</FX_CONTACT_POINT_ID> </UseTemplate> <UseTemplate Name="ASOBO_SMOKE_GR_LANDING_FX"> <FX_CONTACT_POINT_ID>1</FX_CONTACT_POINT_ID> </UseTemplate> <UseTemplate Name="ASOBO_SMOKE_GR_LANDING_FX"> <FX_CONTACT_POINT_ID>2</FX_CONTACT_POINT_ID> </UseTemplate> <UseTemplate Name="ASOBO_DUST_GR_LANDING_FX"> <FX_CONTACT_POINT_ID>0</FX_CONTACT_POINT_ID> </UseTemplate> <UseTemplate Name="ASOBO_DUST_GR_LANDING_FX"> <FX_CONTACT_POINT_ID>1</FX_CONTACT_POINT_ID> </UseTemplate> <UseTemplate Name="ASOBO_DUST_GR_LANDING_FX"> <FX_CONTACT_POINT_ID>2</FX_CONTACT_POINT_ID> </UseTemplate> <UseTemplate Name="ASOBO_GRASS_GR_LANDING_FX"> <FX_CONTACT_POINT_ID>0</FX_CONTACT_POINT_ID> </UseTemplate> <UseTemplate Name="ASOBO_GRASS_GR_LANDING_FX"> <FX_CONTACT_POINT_ID>1</FX_CONTACT_POINT_ID> </UseTemplate> <UseTemplate Name="ASOBO_GRASS_GR_LANDING_FX"> <FX_CONTACT_POINT_ID>2</FX_CONTACT_POINT_ID> </UseTemplate> <UseTemplate Name="ASOBO_SNOW_GR_LANDING_FX"> <FX_CONTACT_POINT_ID>0</FX_CONTACT_POINT_ID> </UseTemplate> <UseTemplate Name="ASOBO_SNOW_GR_LANDING_FX"> <FX_CONTACT_POINT_ID>1</FX_CONTACT_POINT_ID> </UseTemplate> <UseTemplate Name="ASOBO_SNOW_GR_LANDING_FX"> <FX_CONTACT_POINT_ID>2</FX_CONTACT_POINT_ID> </UseTemplate> <UseTemplate Name="ASOBO_WATER_GR_LANDING_FX"> <FX_CONTACT_POINT_ID>0</FX_CONTACT_POINT_ID> </UseTemplate> <UseTemplate Name="ASOBO_WATER_GR_LANDING_FX"> <FX_CONTACT_POINT_ID>1</FX_CONTACT_POINT_ID> </UseTemplate> <UseTemplate Name="ASOBO_WATER_GR_LANDING_FX"> <FX_CONTACT_POINT_ID>2</FX_CONTACT_POINT_ID> </UseTemplate> </Template>Templates used:
-
ASOBO_WET_GR_LANDING_FX
Parameters set:
- FX_CONTACT_POINT_ID
-
ASOBO_WET_GR_LANDING_FX
Parameters set:
- FX_CONTACT_POINT_ID
-
ASOBO_WET_GR_LANDING_FX
Parameters set:
- FX_CONTACT_POINT_ID
-
ASOBO_SMOKE_GR_LANDING_FX
Parameters set:
- FX_CONTACT_POINT_ID
-
ASOBO_SMOKE_GR_LANDING_FX
Parameters set:
- FX_CONTACT_POINT_ID
-
ASOBO_SMOKE_GR_LANDING_FX
Parameters set:
- FX_CONTACT_POINT_ID
-
ASOBO_DUST_GR_LANDING_FX
Parameters set:
- FX_CONTACT_POINT_ID
-
ASOBO_DUST_GR_LANDING_FX
Parameters set:
- FX_CONTACT_POINT_ID
-
ASOBO_DUST_GR_LANDING_FX
Parameters set:
- FX_CONTACT_POINT_ID
-
ASOBO_GRASS_GR_LANDING_FX
Parameters set:
- FX_CONTACT_POINT_ID
-
ASOBO_GRASS_GR_LANDING_FX
Parameters set:
- FX_CONTACT_POINT_ID
-
ASOBO_GRASS_GR_LANDING_FX
Parameters set:
- FX_CONTACT_POINT_ID
-
ASOBO_SNOW_GR_LANDING_FX
Parameters set:
- FX_CONTACT_POINT_ID
-
ASOBO_SNOW_GR_LANDING_FX
Parameters set:
- FX_CONTACT_POINT_ID
-
ASOBO_SNOW_GR_LANDING_FX
Parameters set:
- FX_CONTACT_POINT_ID
-
ASOBO_WATER_GR_LANDING_FX
Parameters set:
- FX_CONTACT_POINT_ID
-
ASOBO_WATER_GR_LANDING_FX
Parameters set:
- FX_CONTACT_POINT_ID
-
ASOBO_WATER_GR_LANDING_FX
Parameters set:
- FX_CONTACT_POINT_ID
-
ASOBO_WET_GR_LANDING_FX
-
ASOBO_LANDING_MD_FX
Definition from XML<Template Name="ASOBO_LANDING_MD_FX"> <UseTemplate Name="ASOBO_WET_MD_GR_LANDING_FX"> <FX_CONTACT_POINT_ID>0</FX_CONTACT_POINT_ID> </UseTemplate> <UseTemplate Name="ASOBO_WET_MD_GR_LANDING_FX"> <FX_CONTACT_POINT_ID>1</FX_CONTACT_POINT_ID> </UseTemplate> <UseTemplate Name="ASOBO_WET_MD_GR_LANDING_FX"> <FX_CONTACT_POINT_ID>2</FX_CONTACT_POINT_ID> </UseTemplate> <UseTemplate Name="ASOBO_SMOKE_MD_GR_LANDING_FX"> <FX_CONTACT_POINT_ID>0</FX_CONTACT_POINT_ID> </UseTemplate> <UseTemplate Name="ASOBO_SMOKE_MD_GR_LANDING_FX"> <FX_CONTACT_POINT_ID>1</FX_CONTACT_POINT_ID> </UseTemplate> <UseTemplate Name="ASOBO_SMOKE_MD_GR_LANDING_FX"> <FX_CONTACT_POINT_ID>2</FX_CONTACT_POINT_ID> </UseTemplate> <UseTemplate Name="ASOBO_DUST_GR_LANDING_FX"> <FX_CONTACT_POINT_ID>0</FX_CONTACT_POINT_ID> </UseTemplate> <UseTemplate Name="ASOBO_DUST_GR_LANDING_FX"> <FX_CONTACT_POINT_ID>1</FX_CONTACT_POINT_ID> </UseTemplate> <UseTemplate Name="ASOBO_DUST_GR_LANDING_FX"> <FX_CONTACT_POINT_ID>2</FX_CONTACT_POINT_ID> </UseTemplate> <UseTemplate Name="ASOBO_GRASS_GR_LANDING_FX"> <FX_CONTACT_POINT_ID>0</FX_CONTACT_POINT_ID> </UseTemplate> <UseTemplate Name="ASOBO_GRASS_GR_LANDING_FX"> <FX_CONTACT_POINT_ID>1</FX_CONTACT_POINT_ID> </UseTemplate> <UseTemplate Name="ASOBO_GRASS_GR_LANDING_FX"> <FX_CONTACT_POINT_ID>2</FX_CONTACT_POINT_ID> </UseTemplate> <UseTemplate Name="ASOBO_SNOW_GR_LANDING_FX"> <FX_CONTACT_POINT_ID>0</FX_CONTACT_POINT_ID> </UseTemplate> <UseTemplate Name="ASOBO_SNOW_GR_LANDING_FX"> <FX_CONTACT_POINT_ID>1</FX_CONTACT_POINT_ID> </UseTemplate> <UseTemplate Name="ASOBO_SNOW_GR_LANDING_FX"> <FX_CONTACT_POINT_ID>2</FX_CONTACT_POINT_ID> </UseTemplate> <UseTemplate Name="ASOBO_WATER_GR_LANDING_FX"> <FX_CONTACT_POINT_ID>0</FX_CONTACT_POINT_ID> </UseTemplate> <UseTemplate Name="ASOBO_WATER_GR_LANDING_FX"> <FX_CONTACT_POINT_ID>1</FX_CONTACT_POINT_ID> </UseTemplate> <UseTemplate Name="ASOBO_WATER_GR_LANDING_FX"> <FX_CONTACT_POINT_ID>2</FX_CONTACT_POINT_ID> </UseTemplate> </Template>Templates used:
-
ASOBO_WET_MD_GR_LANDING_FX
Parameters set:
- FX_CONTACT_POINT_ID
-
ASOBO_WET_MD_GR_LANDING_FX
Parameters set:
- FX_CONTACT_POINT_ID
-
ASOBO_WET_MD_GR_LANDING_FX
Parameters set:
- FX_CONTACT_POINT_ID
-
ASOBO_SMOKE_MD_GR_LANDING_FX
Parameters set:
- FX_CONTACT_POINT_ID
-
ASOBO_SMOKE_MD_GR_LANDING_FX
Parameters set:
- FX_CONTACT_POINT_ID
-
ASOBO_SMOKE_MD_GR_LANDING_FX
Parameters set:
- FX_CONTACT_POINT_ID
-
ASOBO_DUST_GR_LANDING_FX
Parameters set:
- FX_CONTACT_POINT_ID
-
ASOBO_DUST_GR_LANDING_FX
Parameters set:
- FX_CONTACT_POINT_ID
-
ASOBO_DUST_GR_LANDING_FX
Parameters set:
- FX_CONTACT_POINT_ID
-
ASOBO_GRASS_GR_LANDING_FX
Parameters set:
- FX_CONTACT_POINT_ID
-
ASOBO_GRASS_GR_LANDING_FX
Parameters set:
- FX_CONTACT_POINT_ID
-
ASOBO_GRASS_GR_LANDING_FX
Parameters set:
- FX_CONTACT_POINT_ID
-
ASOBO_SNOW_GR_LANDING_FX
Parameters set:
- FX_CONTACT_POINT_ID
-
ASOBO_SNOW_GR_LANDING_FX
Parameters set:
- FX_CONTACT_POINT_ID
-
ASOBO_SNOW_GR_LANDING_FX
Parameters set:
- FX_CONTACT_POINT_ID
-
ASOBO_WATER_GR_LANDING_FX
Parameters set:
- FX_CONTACT_POINT_ID
-
ASOBO_WATER_GR_LANDING_FX
Parameters set:
- FX_CONTACT_POINT_ID
-
ASOBO_WATER_GR_LANDING_FX
Parameters set:
- FX_CONTACT_POINT_ID
-
ASOBO_WET_MD_GR_LANDING_FX
-
ASOBO_LANDING_LG_FX
Definition from XML<Template Name="ASOBO_LANDING_LG_FX"> <UseTemplate Name="ASOBO_WET_LG_GR_LANDING_FX"> <FX_CONTACT_POINT_ID>0</FX_CONTACT_POINT_ID> </UseTemplate> <UseTemplate Name="ASOBO_WET_LG_GR_LANDING_FX"> <FX_CONTACT_POINT_ID>1</FX_CONTACT_POINT_ID> </UseTemplate> <UseTemplate Name="ASOBO_WET_LG_GR_LANDING_FX"> <FX_CONTACT_POINT_ID>2</FX_CONTACT_POINT_ID> </UseTemplate> <UseTemplate Name="ASOBO_SMOKE_LG_GR_LANDING_FX"> <FX_CONTACT_POINT_ID>0</FX_CONTACT_POINT_ID> </UseTemplate> <UseTemplate Name="ASOBO_SMOKE_LG_GR_LANDING_FX"> <FX_CONTACT_POINT_ID>1</FX_CONTACT_POINT_ID> </UseTemplate> <UseTemplate Name="ASOBO_SMOKE_LG_GR_LANDING_FX"> <FX_CONTACT_POINT_ID>2</FX_CONTACT_POINT_ID> </UseTemplate> <UseTemplate Name="ASOBO_DUST_GR_LANDING_FX"> <FX_CONTACT_POINT_ID>0</FX_CONTACT_POINT_ID> </UseTemplate> <UseTemplate Name="ASOBO_DUST_GR_LANDING_FX"> <FX_CONTACT_POINT_ID>1</FX_CONTACT_POINT_ID> </UseTemplate> <UseTemplate Name="ASOBO_DUST_GR_LANDING_FX"> <FX_CONTACT_POINT_ID>2</FX_CONTACT_POINT_ID> </UseTemplate> <UseTemplate Name="ASOBO_GRASS_GR_LANDING_FX"> <FX_CONTACT_POINT_ID>0</FX_CONTACT_POINT_ID> </UseTemplate> <UseTemplate Name="ASOBO_GRASS_GR_LANDING_FX"> <FX_CONTACT_POINT_ID>1</FX_CONTACT_POINT_ID> </UseTemplate> <UseTemplate Name="ASOBO_GRASS_GR_LANDING_FX"> <FX_CONTACT_POINT_ID>2</FX_CONTACT_POINT_ID> </UseTemplate> <UseTemplate Name="ASOBO_SNOW_LG_GR_LANDING_FX"> <FX_CONTACT_POINT_ID>0</FX_CONTACT_POINT_ID> </UseTemplate> <UseTemplate Name="ASOBO_SNOW_LG_GR_LANDING_FX"> <FX_CONTACT_POINT_ID>1</FX_CONTACT_POINT_ID> </UseTemplate> <UseTemplate Name="ASOBO_SNOW_LG_GR_LANDING_FX"> <FX_CONTACT_POINT_ID>2</FX_CONTACT_POINT_ID> </UseTemplate> <UseTemplate Name="ASOBO_WATER_GR_LANDING_FX"> <FX_CONTACT_POINT_ID>0</FX_CONTACT_POINT_ID> </UseTemplate> <UseTemplate Name="ASOBO_WATER_GR_LANDING_FX"> <FX_CONTACT_POINT_ID>1</FX_CONTACT_POINT_ID> </UseTemplate> <UseTemplate Name="ASOBO_WATER_GR_LANDING_FX"> <FX_CONTACT_POINT_ID>2</FX_CONTACT_POINT_ID> </UseTemplate> </Template>Templates used:
-
ASOBO_WET_LG_GR_LANDING_FX
Parameters set:
- FX_CONTACT_POINT_ID
-
ASOBO_WET_LG_GR_LANDING_FX
Parameters set:
- FX_CONTACT_POINT_ID
-
ASOBO_WET_LG_GR_LANDING_FX
Parameters set:
- FX_CONTACT_POINT_ID
-
ASOBO_SMOKE_LG_GR_LANDING_FX
Parameters set:
- FX_CONTACT_POINT_ID
-
ASOBO_SMOKE_LG_GR_LANDING_FX
Parameters set:
- FX_CONTACT_POINT_ID
-
ASOBO_SMOKE_LG_GR_LANDING_FX
Parameters set:
- FX_CONTACT_POINT_ID
-
ASOBO_DUST_GR_LANDING_FX
Parameters set:
- FX_CONTACT_POINT_ID
-
ASOBO_DUST_GR_LANDING_FX
Parameters set:
- FX_CONTACT_POINT_ID
-
ASOBO_DUST_GR_LANDING_FX
Parameters set:
- FX_CONTACT_POINT_ID
-
ASOBO_GRASS_GR_LANDING_FX
Parameters set:
- FX_CONTACT_POINT_ID
-
ASOBO_GRASS_GR_LANDING_FX
Parameters set:
- FX_CONTACT_POINT_ID
-
ASOBO_GRASS_GR_LANDING_FX
Parameters set:
- FX_CONTACT_POINT_ID
-
ASOBO_SNOW_LG_GR_LANDING_FX
Parameters set:
- FX_CONTACT_POINT_ID
-
ASOBO_SNOW_LG_GR_LANDING_FX
Parameters set:
- FX_CONTACT_POINT_ID
-
ASOBO_SNOW_LG_GR_LANDING_FX
Parameters set:
- FX_CONTACT_POINT_ID
-
ASOBO_WATER_GR_LANDING_FX
Parameters set:
- FX_CONTACT_POINT_ID
-
ASOBO_WATER_GR_LANDING_FX
Parameters set:
- FX_CONTACT_POINT_ID
-
ASOBO_WATER_GR_LANDING_FX
Parameters set:
- FX_CONTACT_POINT_ID
-
ASOBO_WET_LG_GR_LANDING_FX
-
ASOBO_WET_CP_LANDING_FX
Definition from XML<Template Name="ASOBO_WET_CP_LANDING_FX"> <DefaultTemplateParameters> <FX_GUID>{B2C7B9A6-8F3D-49CE-8418-64086E23C5CB}</FX_GUID> <FX_NAME>LANDING_CP_WET</FX_NAME> <FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID> <FX_NODE>__NO_NODE__</FX_NODE> <DISABLE_SURFACE_TYPE_0>RIVER</DISABLE_SURFACE_TYPE_0> <DISABLE_SURFACE_TYPE_1>WASTE_WATER</DISABLE_SURFACE_TYPE_1> <DISABLE_SURFACE_TYPE_2>WATER</DISABLE_SURFACE_TYPE_2> <DISABLE_SURFACE_TYPE_3>POND</DISABLE_SURFACE_TYPE_3> <DISABLE_SURFACE_TYPE_4>LAKE</DISABLE_SURFACE_TYPE_4> <DISABLE_SURFACE_TYPE_5>OCEAN</DISABLE_SURFACE_TYPE_5> <DISABLE_SURFACE_TYPE_6>WATER_FSX</DISABLE_SURFACE_TYPE_6> </DefaultTemplateParameters> <Component ID="FX_LANDING_CP_WET_#FX_NODE#_#FX_CONTACT_POINT_ID#" Node="#FX_NODE#"> <UseTemplate Name="ASOBO_GT_FX"> <FX_CODE>(A:CONTACT POINT IS ON GROUND:#FX_CONTACT_POINT_ID#, Keyframe) 0 > (A:GROUND VELOCITY, knot) 0.1 > and (A:SURFACE CONDITION, enum) 1 == and</FX_CODE> </UseTemplate> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- FX_GUID
- FX_NAME
- FX_CONTACT_POINT_ID
- FX_NODE
- DISABLE_SURFACE_TYPE_0
- DISABLE_SURFACE_TYPE_1
- DISABLE_SURFACE_TYPE_2
- DISABLE_SURFACE_TYPE_3
- DISABLE_SURFACE_TYPE_4
- DISABLE_SURFACE_TYPE_5
- DISABLE_SURFACE_TYPE_6
Parameters read:
- FX_NODE
- FX_CONTACT_POINT_ID
Components:
-
FX_LANDING_CP_WET_#FX_NODE#_#FX_CONTACT_POINT_ID# (Node: #FX_NODE#)
Templates used:
-
ASOBO_GT_FX
Parameters set:
- FX_CODE (using FX_CONTACT_POINT_ID)
-
ASOBO_GT_FX
-
Default
-
ASOBO_WET_MD_CP_LANDING_FX
Definition from XML<Template Name="ASOBO_WET_MD_CP_LANDING_FX"> <DefaultTemplateParameters> <FX_GUID>{25736E7E-6F36-4046-91BC-9AFFCE737F28}</FX_GUID> <FX_NAME>LANDING_CP_MD_WET</FX_NAME> <FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID> <FX_NODE>__NO_NODE__</FX_NODE> <DISABLE_SURFACE_TYPE_0>RIVER</DISABLE_SURFACE_TYPE_0> <DISABLE_SURFACE_TYPE_1>WASTE_WATER</DISABLE_SURFACE_TYPE_1> <DISABLE_SURFACE_TYPE_2>WATER</DISABLE_SURFACE_TYPE_2> <DISABLE_SURFACE_TYPE_3>POND</DISABLE_SURFACE_TYPE_3> <DISABLE_SURFACE_TYPE_4>LAKE</DISABLE_SURFACE_TYPE_4> <DISABLE_SURFACE_TYPE_5>OCEAN</DISABLE_SURFACE_TYPE_5> <DISABLE_SURFACE_TYPE_6>WATER_FSX</DISABLE_SURFACE_TYPE_6> </DefaultTemplateParameters> <Component ID="FX_LANDING_CP_MD_WET_#FX_NODE#_#FX_CONTACT_POINT_ID#" Node="#FX_NODE#"> <UseTemplate Name="ASOBO_GT_FX"> <FX_CODE>(A:CONTACT POINT IS ON GROUND:#FX_CONTACT_POINT_ID#, Keyframe) 0 > (A:GROUND VELOCITY, knot) 0.1 > and (A:SURFACE CONDITION, enum) 1 == and</FX_CODE> </UseTemplate> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- FX_GUID
- FX_NAME
- FX_CONTACT_POINT_ID
- FX_NODE
- DISABLE_SURFACE_TYPE_0
- DISABLE_SURFACE_TYPE_1
- DISABLE_SURFACE_TYPE_2
- DISABLE_SURFACE_TYPE_3
- DISABLE_SURFACE_TYPE_4
- DISABLE_SURFACE_TYPE_5
- DISABLE_SURFACE_TYPE_6
Parameters read:
- FX_NODE
- FX_CONTACT_POINT_ID
Components:
-
FX_LANDING_CP_MD_WET_#FX_NODE#_#FX_CONTACT_POINT_ID# (Node: #FX_NODE#)
Templates used:
-
ASOBO_GT_FX
Parameters set:
- FX_CODE (using FX_CONTACT_POINT_ID)
-
ASOBO_GT_FX
-
Default
-
ASOBO_WET_LG_CP_LANDING_FX
Definition from XML<Template Name="ASOBO_WET_LG_CP_LANDING_FX"> <DefaultTemplateParameters> <FX_GUID>{0915D0C5-F0B3-4EAD-8D96-08FF2F6F0057}</FX_GUID> <FX_NAME>LANDING_CP_LG_WET</FX_NAME> <FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID> <FX_NODE>__NO_NODE__</FX_NODE> <DISABLE_SURFACE_TYPE_0>RIVER</DISABLE_SURFACE_TYPE_0> <DISABLE_SURFACE_TYPE_1>WASTE_WATER</DISABLE_SURFACE_TYPE_1> <DISABLE_SURFACE_TYPE_2>WATER</DISABLE_SURFACE_TYPE_2> <DISABLE_SURFACE_TYPE_3>POND</DISABLE_SURFACE_TYPE_3> <DISABLE_SURFACE_TYPE_4>LAKE</DISABLE_SURFACE_TYPE_4> <DISABLE_SURFACE_TYPE_5>OCEAN</DISABLE_SURFACE_TYPE_5> <DISABLE_SURFACE_TYPE_6>WATER_FSX</DISABLE_SURFACE_TYPE_6> </DefaultTemplateParameters> <Component ID="FX_LANDING_CP_LG_WET_#FX_NODE#_#FX_CONTACT_POINT_ID#" Node="#FX_NODE#"> <UseTemplate Name="ASOBO_GT_FX"> <FX_CODE>(A:CONTACT POINT IS ON GROUND:#FX_CONTACT_POINT_ID#, Keyframe) 0 > (A:GROUND VELOCITY, knot) 0.1 > and (A:SURFACE CONDITION, enum) 1 == and</FX_CODE> </UseTemplate> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- FX_GUID
- FX_NAME
- FX_CONTACT_POINT_ID
- FX_NODE
- DISABLE_SURFACE_TYPE_0
- DISABLE_SURFACE_TYPE_1
- DISABLE_SURFACE_TYPE_2
- DISABLE_SURFACE_TYPE_3
- DISABLE_SURFACE_TYPE_4
- DISABLE_SURFACE_TYPE_5
- DISABLE_SURFACE_TYPE_6
Parameters read:
- FX_NODE
- FX_CONTACT_POINT_ID
Components:
-
FX_LANDING_CP_LG_WET_#FX_NODE#_#FX_CONTACT_POINT_ID# (Node: #FX_NODE#)
Templates used:
-
ASOBO_GT_FX
Parameters set:
- FX_CODE (using FX_CONTACT_POINT_ID)
-
ASOBO_GT_FX
-
Default
-
ASOBO_SMOKE_CP_LANDING_FX
Definition from XML<Template Name="ASOBO_SMOKE_CP_LANDING_FX"> <DefaultTemplateParameters> <FX_GUID>{7E68323C-E75D-4F5B-988E-65DD4956F6BA}</FX_GUID> <FX_NAME>LANDING_CP_SMOKE</FX_NAME> <FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID> <FX_NODE>__NO_NODE__</FX_NODE> <ENABLE_SURFACE_TYPE_0>CONCRETE</ENABLE_SURFACE_TYPE_0> <ENABLE_SURFACE_TYPE_1>ASPHALT</ENABLE_SURFACE_TYPE_1> <ENABLE_SURFACE_TYPE_2>BITUMINUS</ENABLE_SURFACE_TYPE_2> <ENABLE_SURFACE_TYPE_3>MACADAM</ENABLE_SURFACE_TYPE_3> <ENABLE_SURFACE_TYPE_4>TARMAC</ENABLE_SURFACE_TYPE_4> </DefaultTemplateParameters> <Component ID="FX_LANDING_CP_SMOKE_#FX_NODE#_#FX_CONTACT_POINT_ID#" Node="#FX_NODE#"> <UseTemplate Name="ASOBO_GT_FX"> <FX_CODE>(A:CONTACT POINT IS ON GROUND:#FX_CONTACT_POINT_ID#, Keyframe) 0 > (A:CONTACT POINT SKIDDING FACTOR:#FX_CONTACT_POINT_ID#, knot) 0 > and (A:SURFACE CONDITION, enum) 1 != and</FX_CODE> </UseTemplate> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- FX_GUID
- FX_NAME
- FX_CONTACT_POINT_ID
- FX_NODE
- ENABLE_SURFACE_TYPE_0
- ENABLE_SURFACE_TYPE_1
- ENABLE_SURFACE_TYPE_2
- ENABLE_SURFACE_TYPE_3
- ENABLE_SURFACE_TYPE_4
Parameters read:
- FX_NODE
- FX_CONTACT_POINT_ID
Components:
-
FX_LANDING_CP_SMOKE_#FX_NODE#_#FX_CONTACT_POINT_ID# (Node: #FX_NODE#)
Templates used:
-
ASOBO_GT_FX
Parameters set:
- FX_CODE (using FX_CONTACT_POINT_ID)
-
ASOBO_GT_FX
-
Default
-
ASOBO_SMOKE_MD_CP_LANDING_FX
Definition from XML<Template Name="ASOBO_SMOKE_MD_CP_LANDING_FX"> <DefaultTemplateParameters> <FX_GUID>{38428600-D14A-41A8-9FED-A7C815F89AEE}</FX_GUID> <FX_NAME>LANDING_CP_MD_SMOKE</FX_NAME> <FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID> <FX_NODE>__NO_NODE__</FX_NODE> <ENABLE_SURFACE_TYPE_0>CONCRETE</ENABLE_SURFACE_TYPE_0> <ENABLE_SURFACE_TYPE_1>ASPHALT</ENABLE_SURFACE_TYPE_1> <ENABLE_SURFACE_TYPE_2>BITUMINUS</ENABLE_SURFACE_TYPE_2> <ENABLE_SURFACE_TYPE_3>MACADAM</ENABLE_SURFACE_TYPE_3> <ENABLE_SURFACE_TYPE_4>TARMAC</ENABLE_SURFACE_TYPE_4> </DefaultTemplateParameters> <Component ID="FX_LANDING_CP_MD_SMOKE_#FX_NODE#_#FX_CONTACT_POINT_ID#" Node="#FX_NODE#"> <UseTemplate Name="ASOBO_GT_FX"> <FX_CODE>(A:CONTACT POINT IS ON GROUND:#FX_CONTACT_POINT_ID#, Keyframe) 0 > (A:CONTACT POINT SKIDDING FACTOR:#FX_CONTACT_POINT_ID#, knot) 0 > and (A:SURFACE CONDITION, enum) 1 != and</FX_CODE> </UseTemplate> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- FX_GUID
- FX_NAME
- FX_CONTACT_POINT_ID
- FX_NODE
- ENABLE_SURFACE_TYPE_0
- ENABLE_SURFACE_TYPE_1
- ENABLE_SURFACE_TYPE_2
- ENABLE_SURFACE_TYPE_3
- ENABLE_SURFACE_TYPE_4
Parameters read:
- FX_NODE
- FX_CONTACT_POINT_ID
Components:
-
FX_LANDING_CP_MD_SMOKE_#FX_NODE#_#FX_CONTACT_POINT_ID# (Node: #FX_NODE#)
Templates used:
-
ASOBO_GT_FX
Parameters set:
- FX_CODE (using FX_CONTACT_POINT_ID)
-
ASOBO_GT_FX
-
Default
-
ASOBO_SMOKE_LG_CP_LANDING_FX
Definition from XML<Template Name="ASOBO_SMOKE_LG_CP_LANDING_FX"> <DefaultTemplateParameters> <FX_GUID>{C9747EAE-5970-477A-81D7-2FC96CE0C3EA}</FX_GUID> <FX_NAME>LANDING_CP_LG_SMOKE</FX_NAME> <FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID> <FX_NODE>__NO_NODE__</FX_NODE> <ENABLE_SURFACE_TYPE_0>CONCRETE</ENABLE_SURFACE_TYPE_0> <ENABLE_SURFACE_TYPE_1>ASPHALT</ENABLE_SURFACE_TYPE_1> <ENABLE_SURFACE_TYPE_2>BITUMINUS</ENABLE_SURFACE_TYPE_2> <ENABLE_SURFACE_TYPE_3>MACADAM</ENABLE_SURFACE_TYPE_3> <ENABLE_SURFACE_TYPE_4>TARMAC</ENABLE_SURFACE_TYPE_4> </DefaultTemplateParameters> <Component ID="FX_LANDING_CP_LG_SMOKE_#FX_NODE#_#FX_CONTACT_POINT_ID#" Node="#FX_NODE#"> <UseTemplate Name="ASOBO_GT_FX"> <FX_CODE>(A:CONTACT POINT IS ON GROUND:#FX_CONTACT_POINT_ID#, Keyframe) 0 > (A:CONTACT POINT SKIDDING FACTOR:#FX_CONTACT_POINT_ID#, knot) 0 > and (A:SURFACE CONDITION, enum) 1 != and</FX_CODE> </UseTemplate> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- FX_GUID
- FX_NAME
- FX_CONTACT_POINT_ID
- FX_NODE
- ENABLE_SURFACE_TYPE_0
- ENABLE_SURFACE_TYPE_1
- ENABLE_SURFACE_TYPE_2
- ENABLE_SURFACE_TYPE_3
- ENABLE_SURFACE_TYPE_4
Parameters read:
- FX_NODE
- FX_CONTACT_POINT_ID
Components:
-
FX_LANDING_CP_LG_SMOKE_#FX_NODE#_#FX_CONTACT_POINT_ID# (Node: #FX_NODE#)
Templates used:
-
ASOBO_GT_FX
Parameters set:
- FX_CODE (using FX_CONTACT_POINT_ID)
-
ASOBO_GT_FX
-
Default
-
ASOBO_DUST_CP_LANDING_FX
Definition from XML<Template Name="ASOBO_DUST_CP_LANDING_FX"> <DefaultTemplateParameters> <FX_GUID>{B563B75A-F2F0-4F09-8617-BE9F173BC8FB}</FX_GUID> <FX_NAME>LANDING_CP_DUST</FX_NAME> <FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID> <FX_NODE>__NO_NODE__</FX_NODE> <ENABLE_SURFACE_TYPE_0>DUST</ENABLE_SURFACE_TYPE_0> <ENABLE_SURFACE_TYPE_1>DIRT</ENABLE_SURFACE_TYPE_1> </DefaultTemplateParameters> <Component ID="FX_LANDING_CP_DUST_#FX_NODE#_#FX_CONTACT_POINT_ID#" Node="#FX_NODE#"> <UseTemplate Name="ASOBO_GT_FX"> <FX_CODE>(A:CONTACT POINT IS ON GROUND:#FX_CONTACT_POINT_ID#, Keyframe) 0 > (A:GROUND VELOCITY, knot) 0.1 > and (A:SURFACE CONDITION, enum) 1 != and</FX_CODE> </UseTemplate> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- FX_GUID
- FX_NAME
- FX_CONTACT_POINT_ID
- FX_NODE
- ENABLE_SURFACE_TYPE_0
- ENABLE_SURFACE_TYPE_1
Parameters read:
- FX_NODE
- FX_CONTACT_POINT_ID
Components:
-
FX_LANDING_CP_DUST_#FX_NODE#_#FX_CONTACT_POINT_ID# (Node: #FX_NODE#)
Templates used:
-
ASOBO_GT_FX
Parameters set:
- FX_CODE (using FX_CONTACT_POINT_ID)
-
ASOBO_GT_FX
-
Default
-
ASOBO_GRASS_CP_LANDING_FX
Definition from XML<Template Name="ASOBO_GRASS_CP_LANDING_FX"> <DefaultTemplateParameters> <FX_GUID>{F3BD2906-EF27-406B-BB55-02FF0BBCEF01}</FX_GUID> <FX_NAME>LANDING_CP_GRASS</FX_NAME> <FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID> <FX_NODE>__NO_NODE__</FX_NODE> <ENABLE_SURFACE_TYPE_0>GRASS</ENABLE_SURFACE_TYPE_0> </DefaultTemplateParameters> <Component ID="FX_LANDING_CP_GRASS_#FX_NODE#_#FX_CONTACT_POINT_ID#" Node="#FX_NODE#"> <UseTemplate Name="ASOBO_GT_FX"> <FX_CODE>(A:CONTACT POINT IS ON GROUND:#FX_CONTACT_POINT_ID#, Keyframe) 0 > (A:GROUND VELOCITY, knot) 0.1 > and</FX_CODE> </UseTemplate> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- FX_GUID
- FX_NAME
- FX_CONTACT_POINT_ID
- FX_NODE
- ENABLE_SURFACE_TYPE_0
Parameters read:
- FX_NODE
- FX_CONTACT_POINT_ID
Components:
-
FX_LANDING_CP_GRASS_#FX_NODE#_#FX_CONTACT_POINT_ID# (Node: #FX_NODE#)
Templates used:
-
ASOBO_GT_FX
Parameters set:
- FX_CODE (using FX_CONTACT_POINT_ID)
-
ASOBO_GT_FX
-
Default
-
ASOBO_SNOW_CP_LANDING_FX
Definition from XML<Template Name="ASOBO_SNOW_CP_LANDING_FX"> <DefaultTemplateParameters> <FX_GUID>{B9EEB6C8-D2F1-45C3-951D-033D973E18C8}</FX_GUID> <FX_NAME>LANDING_CP_SNOW</FX_NAME> <FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID> <FX_NODE>__NO_NODE__</FX_NODE> <ENABLE_SURFACE_TYPE_0>SNOW</ENABLE_SURFACE_TYPE_0> </DefaultTemplateParameters> <Component ID="FX_LANDING_CP_SNOW_#FX_NODE#_#FX_CONTACT_POINT_ID#" Node="#FX_NODE#"> <UseTemplate Name="ASOBO_GT_FX"> <FX_CODE>(A:CONTACT POINT IS ON GROUND:#FX_CONTACT_POINT_ID#, Keyframe) 0 > (A:GROUND VELOCITY, knot) 5 > and (A:SURFACE CONDITION, enum) 1 != and</FX_CODE> </UseTemplate> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- FX_GUID
- FX_NAME
- FX_CONTACT_POINT_ID
- FX_NODE
- ENABLE_SURFACE_TYPE_0
Parameters read:
- FX_NODE
- FX_CONTACT_POINT_ID
Components:
-
FX_LANDING_CP_SNOW_#FX_NODE#_#FX_CONTACT_POINT_ID# (Node: #FX_NODE#)
Templates used:
-
ASOBO_GT_FX
Parameters set:
- FX_CODE (using FX_CONTACT_POINT_ID)
-
ASOBO_GT_FX
-
Default
-
ASOBO_SNOW_LG_CP_LANDING_FX
Definition from XML<Template Name="ASOBO_SNOW_LG_CP_LANDING_FX"> <DefaultTemplateParameters> <FX_GUID>{883A007E-4DEE-4D3D-8081-55CC462986CA}</FX_GUID> <FX_NAME>LANDING_CP_LG_SNOW</FX_NAME> <FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID> <FX_NODE>__NO_NODE__</FX_NODE> <ENABLE_SURFACE_TYPE_0>SNOW</ENABLE_SURFACE_TYPE_0> </DefaultTemplateParameters> <Component ID="FX_LANDING_CP_LG_SNOW_#FX_NODE#_#FX_CONTACT_POINT_ID#" Node="#FX_NODE#"> <UseTemplate Name="ASOBO_GT_FX"> <FX_CODE>(A:CONTACT POINT IS ON GROUND:#FX_CONTACT_POINT_ID#, Keyframe) 0 > (A:GROUND VELOCITY, knot) 5 > and (A:SURFACE CONDITION, enum) 1 != and</FX_CODE> </UseTemplate> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- FX_GUID
- FX_NAME
- FX_CONTACT_POINT_ID
- FX_NODE
- ENABLE_SURFACE_TYPE_0
Parameters read:
- FX_NODE
- FX_CONTACT_POINT_ID
Components:
-
FX_LANDING_CP_LG_SNOW_#FX_NODE#_#FX_CONTACT_POINT_ID# (Node: #FX_NODE#)
Templates used:
-
ASOBO_GT_FX
Parameters set:
- FX_CODE (using FX_CONTACT_POINT_ID)
-
ASOBO_GT_FX
-
Default
-
ASOBO_WATER_CP_LANDING_FX
Definition from XML<Template Name="ASOBO_WATER_CP_LANDING_FX"> <DefaultTemplateParameters> <FX_GUID>{BA223A84-9E83-4A58-B7D7-0C9CBA4E1627}</FX_GUID> <FX_NAME>LANDING_CP_WATER</FX_NAME> <FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID> <FX_NODE>__NO_NODE__</FX_NODE> <ENABLE_SURFACE_TYPE_0>RIVER</ENABLE_SURFACE_TYPE_0> <ENABLE_SURFACE_TYPE_1>WASTE_WATER</ENABLE_SURFACE_TYPE_1> <ENABLE_SURFACE_TYPE_2>WATER</ENABLE_SURFACE_TYPE_2> <ENABLE_SURFACE_TYPE_3>POND</ENABLE_SURFACE_TYPE_3> <ENABLE_SURFACE_TYPE_4>LAKE</ENABLE_SURFACE_TYPE_4> <ENABLE_SURFACE_TYPE_5>OCEAN</ENABLE_SURFACE_TYPE_5> <ENABLE_SURFACE_TYPE_6>WATER_FSX</ENABLE_SURFACE_TYPE_6> </DefaultTemplateParameters> <Component ID="FX_LANDING_CP_WATER_#FX_NODE#_#FX_CONTACT_POINT_ID#" Node="#FX_NODE#"> <UseTemplate Name="ASOBO_GT_FX"> <FX_CODE>(A:CONTACT POINT WATER DEPTH:#FX_CONTACT_POINT_ID#, Keyframe) 0 > (A:GROUND VELOCITY, knot) 5 > and</FX_CODE> </UseTemplate> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- FX_GUID
- FX_NAME
- FX_CONTACT_POINT_ID
- FX_NODE
- ENABLE_SURFACE_TYPE_0
- ENABLE_SURFACE_TYPE_1
- ENABLE_SURFACE_TYPE_2
- ENABLE_SURFACE_TYPE_3
- ENABLE_SURFACE_TYPE_4
- ENABLE_SURFACE_TYPE_5
- ENABLE_SURFACE_TYPE_6
Parameters read:
- FX_NODE
- FX_CONTACT_POINT_ID
Components:
-
FX_LANDING_CP_WATER_#FX_NODE#_#FX_CONTACT_POINT_ID# (Node: #FX_NODE#)
Templates used:
-
ASOBO_GT_FX
Parameters set:
- FX_CODE (using FX_CONTACT_POINT_ID)
-
ASOBO_GT_FX
-
Default
-
ASOBO_FX_EXHAUST_MD
Definition from XML<Template Name="ASOBO_FX_EXHAUST_MD"> <DefaultTemplateParameters> <FX_GUID>{35943419-2F02-41B4-BB27-37811ADC32CE}</FX_GUID> <FX_NAME>FX_EXHAUST_MD</FX_NAME> <FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID> <FX_NODE>__NO_NODE__</FX_NODE> </DefaultTemplateParameters> <Component ID="FX_EXHAUST_MD_#FX_NODE#" Node="#FX_NODE#"> <UseTemplate Name="ASOBO_GT_FX"> <FX_CODE>(A:GENERAL ENG STARTER ACTIVE:1, Bool) 0 > (A:GENERAL ENG COMBUSTION:1, Bool) 0 > and</FX_CODE> </UseTemplate> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- FX_GUID
- FX_NAME
- FX_CONTACT_POINT_ID
- FX_NODE
Parameters read:
- FX_NODE
Components:
-
FX_EXHAUST_MD_#FX_NODE# (Node: #FX_NODE#)
Templates used:
-
ASOBO_GT_FX
Parameters set:
- FX_CODE
-
ASOBO_GT_FX
-
Default
-
ASOBO_FX_PRESSURETRAIL
Definition from XML<Template Name="ASOBO_FX_PRESSURETRAIL"> <DefaultTemplateParameters> <FX_GUID>{E78D8109-DFFC-4DF1-9A72-94982EF10629}</FX_GUID> <FX_NAME>FX_FX_PRESSURETRAIL</FX_NAME> <FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID> <FX_NODE>__NO_NODE__</FX_NODE> </DefaultTemplateParameters> <Component ID="FX_FX_PRESSURETRAIL_#FX_NODE#" Node="#FX_NODE#"> <UseTemplate Name="ASOBO_GT_FX"> <FX_CODE>(A:GROUND VELOCITY, knot) 100 > (A:G FORCE, GForce) 2 > and</FX_CODE> </UseTemplate> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- FX_GUID
- FX_NAME
- FX_CONTACT_POINT_ID
- FX_NODE
Parameters read:
- FX_NODE
Components:
-
FX_FX_PRESSURETRAIL_#FX_NODE# (Node: #FX_NODE#)
Templates used:
-
ASOBO_GT_FX
Parameters set:
- FX_CODE
-
ASOBO_GT_FX
-
Default
-
ASOBO_SKY_ROOT_COCKPITPLASMA_FX
Definition from XML<Template Name="ASOBO_SKY_ROOT_COCKPITPLASMA_FX"> <DefaultTemplateParameters> <FX_GUID>{055DF13A-3311-4E2C-BAD9-3B869C10F3DF}</FX_GUID> <FX_NAME>FX_COCKPITPLASMA</FX_NAME> <FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID> <FX_NODE>__NO_NODE__</FX_NODE> </DefaultTemplateParameters> <Component ID="FX_COCKPITPLASMA_#FX_NODE#" Node="#FX_NODE#"> <UseTemplate Name="ASOBO_GT_FX"> <FX_CODE>(A:AIRSPEED MACH, mach) 7 ></FX_CODE> </UseTemplate> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- FX_GUID
- FX_NAME
- FX_CONTACT_POINT_ID
- FX_NODE
Parameters read:
- FX_NODE
Components:
-
FX_COCKPITPLASMA_#FX_NODE# (Node: #FX_NODE#)
Templates used:
-
ASOBO_GT_FX
Parameters set:
- FX_CODE
-
ASOBO_GT_FX
-
Default
-
ASOBO_WATER_NODE_LOWALTWATER_FX
Definition from XML<Template Name="ASOBO_WATER_NODE_LOWALTWATER_FX"> <DefaultTemplateParameters> <FX_GUID>{422C6BE8-A423-48BA-835B-982E0C2FB32E}</FX_GUID> <FX_NAME>FX_LOWALTWATER</FX_NAME> <FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID> <FX_NODE>__NO_NODE__</FX_NODE> <ENABLE_SURFACE_TYPE_0>RIVER</ENABLE_SURFACE_TYPE_0> <ENABLE_SURFACE_TYPE_1>WASTE_WATER</ENABLE_SURFACE_TYPE_1> <ENABLE_SURFACE_TYPE_2>WATER</ENABLE_SURFACE_TYPE_2> <ENABLE_SURFACE_TYPE_3>POND</ENABLE_SURFACE_TYPE_3> <ENABLE_SURFACE_TYPE_4>LAKE</ENABLE_SURFACE_TYPE_4> <ENABLE_SURFACE_TYPE_5>OCEAN</ENABLE_SURFACE_TYPE_5> <ENABLE_SURFACE_TYPE_6>WATER_FSX</ENABLE_SURFACE_TYPE_6> </DefaultTemplateParameters> <Component ID="FX_LOWALTWATER_#FX_NODE#" Node="#FX_NODE#"> <UseTemplate Name="ASOBO_GT_FX"/> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- FX_GUID
- FX_NAME
- FX_CONTACT_POINT_ID
- FX_NODE
- ENABLE_SURFACE_TYPE_0
- ENABLE_SURFACE_TYPE_1
- ENABLE_SURFACE_TYPE_2
- ENABLE_SURFACE_TYPE_3
- ENABLE_SURFACE_TYPE_4
- ENABLE_SURFACE_TYPE_5
- ENABLE_SURFACE_TYPE_6
Parameters read:
- FX_NODE
Components:
-
FX_LOWALTWATER_#FX_NODE# (Node: #FX_NODE#)
Templates used:
-
Default
-
ASOBO_SKY_NODE_VAPOURCONE_FX
Definition from XML<Template Name="ASOBO_SKY_NODE_VAPOURCONE_FX"> <DefaultTemplateParameters> <FX_GUID>{8264917A-F2AB-4759-AF91-4E0C4BFBF849}</FX_GUID> <FX_NAME>FX_VAPOURCONE</FX_NAME> <FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID> <FX_NODE>__NO_NODE__</FX_NODE> </DefaultTemplateParameters> <Component ID="FX_VAPOURCONE_#FX_NODE#" Node="#FX_NODE#"> <UseTemplate Name="ASOBO_GT_FX"/> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- FX_GUID
- FX_NAME
- FX_CONTACT_POINT_ID
- FX_NODE
Parameters read:
- FX_NODE
Components:
-
FX_VAPOURCONE_#FX_NODE# (Node: #FX_NODE#)
Templates used:
-
Default
-
ASOBO_FX_WINGVAPOUR
Definition from XML<Template Name="ASOBO_FX_WINGVAPOUR"> <DefaultTemplateParameters> <FX_GUID>{0C2D2FFE-536B-44F7-BF26-5F205A72E283}</FX_GUID> <FX_NAME>FX_WINGVAPOUR</FX_NAME> <FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID> <FX_NODE>__NO_NODE__</FX_NODE> </DefaultTemplateParameters> <Component ID="FX_WINGVAPOUR_#FX_NODE#" Node="#FX_NODE#"> <UseTemplate Name="ASOBO_GT_FX"> <FX_CODE>(A:GROUND VELOCITY, knot) 100 > (A:G FORCE, GForce) 2 > and</FX_CODE> </UseTemplate> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- FX_GUID
- FX_NAME
- FX_CONTACT_POINT_ID
- FX_NODE
Parameters read:
- FX_NODE
Components:
-
FX_WINGVAPOUR_#FX_NODE# (Node: #FX_NODE#)
Templates used:
-
ASOBO_GT_FX
Parameters set:
- FX_CODE
-
ASOBO_GT_FX
-
Default
-
ASOBO_FX_DRAGTRAIL
Definition from XML<Template Name="ASOBO_FX_DRAGTRAIL"> <DefaultTemplateParameters> <FX_GUID>{F938513E-7D81-4D40-9057-762F8017EB1F}</FX_GUID> <FX_NAME>FX_DRAGTRAIL</FX_NAME> <FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID> <FX_NODE>__NO_NODE__</FX_NODE> </DefaultTemplateParameters> <Component ID="FX_DRAGTRAIL_#FX_NODE#" Node="#FX_NODE#"> <UseTemplate Name="ASOBO_GT_FX"> <FX_CODE>(A:GROUND VELOCITY, knot) 100 > (A:G FORCE, GForce) 2 > and</FX_CODE> </UseTemplate> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- FX_GUID
- FX_NAME
- FX_CONTACT_POINT_ID
- FX_NODE
Parameters read:
- FX_NODE
Components:
-
FX_DRAGTRAIL_#FX_NODE# (Node: #FX_NODE#)
Templates used:
-
ASOBO_GT_FX
Parameters set:
- FX_CODE
-
ASOBO_GT_FX
-
Default
-
ASOBO_FX_LOW_ALTITUDE_DUST
Definition from XML<Template Name="ASOBO_FX_LOW_ALTITUDE_DUST"> <DefaultTemplateParameters> <FX_GUID>{C8FB3147-D775-4CD1-AC8F-AEB717924F86}</FX_GUID> <FX_NAME>FX_LOW_ALTITUDE_DUST</FX_NAME> <FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID> <FX_NODE>__NO_NODE__</FX_NODE> <ENABLE_SURFACE_TYPE_0>DUST</ENABLE_SURFACE_TYPE_0> <ENABLE_SURFACE_TYPE_1>SNOW</ENABLE_SURFACE_TYPE_1> <ENABLE_SURFACE_TYPE_2>DIRT</ENABLE_SURFACE_TYPE_2> </DefaultTemplateParameters> <Component ID="FX_LOW_ALTITUDE_DUST_#FX_NODE#_#FX_CONTACT_POINT_ID#" Node="#FX_NODE#"> <UseTemplate Name="ASOBO_GT_FX"> <FX_CODE>(A:PLANE ALT ABOVE GROUND, Feet) 100 < (A:GENERAL ENG COMBUSTION:1, Bool) 0 > and</FX_CODE> </UseTemplate> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- FX_GUID
- FX_NAME
- FX_CONTACT_POINT_ID
- FX_NODE
- ENABLE_SURFACE_TYPE_0
- ENABLE_SURFACE_TYPE_1
- ENABLE_SURFACE_TYPE_2
Parameters read:
- FX_NODE
- FX_CONTACT_POINT_ID
Components:
-
FX_LOW_ALTITUDE_DUST_#FX_NODE#_#FX_CONTACT_POINT_ID# (Node: #FX_NODE#)
Templates used:
-
ASOBO_GT_FX
Parameters set:
- FX_CODE
-
ASOBO_GT_FX
-
Default
-
ASOBO_GROUND_CP_LOWALTITUDEDUSTFX2_FX
Definition from XML<Template Name="ASOBO_GROUND_CP_LOWALTITUDEDUSTFX2_FX"> <DefaultTemplateParameters> <FX_GUID>{E0C80975-7057-4DFA-9DC1-18008B7E591C}</FX_GUID> <FX_NAME>FX_LOW_ALTITUDE_DUST_FX2</FX_NAME> <FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID> <FX_NODE>__NO_NODE__</FX_NODE> <ENABLE_SURFACE_TYPE_0>DUST</ENABLE_SURFACE_TYPE_0> <ENABLE_SURFACE_TYPE_1>SNOW</ENABLE_SURFACE_TYPE_1> <ENABLE_SURFACE_TYPE_2>DIRT</ENABLE_SURFACE_TYPE_2> </DefaultTemplateParameters> <Component ID="FX_LOW_ALTITUDE_DUST_FX2_#FX_NODE#_#FX_CONTACT_POINT_ID#" Node="#FX_NODE#"> <UseTemplate Name="ASOBO_GT_FX"> <FX_CODE>(A:PLANE ALT ABOVE GROUND, Feet) 400 < (A:AIRSPEED INDICATED, knot) 120 > and (A:PLANE PITCH DEGREES, degrees) -5 < and (A:GENERAL ENG COMBUSTION:1, Bool) 0 > and</FX_CODE> </UseTemplate> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- FX_GUID
- FX_NAME
- FX_CONTACT_POINT_ID
- FX_NODE
- ENABLE_SURFACE_TYPE_0
- ENABLE_SURFACE_TYPE_1
- ENABLE_SURFACE_TYPE_2
Parameters read:
- FX_NODE
- FX_CONTACT_POINT_ID
Components:
-
FX_LOW_ALTITUDE_DUST_FX2_#FX_NODE#_#FX_CONTACT_POINT_ID# (Node: #FX_NODE#)
Templates used:
-
ASOBO_GT_FX
Parameters set:
- FX_CODE
-
ASOBO_GT_FX
-
Default
-
ASOBO_GROUND_CP_LOWALTITUDEDUST_SUPERSONIC_FX
Definition from XML<Template Name="ASOBO_GROUND_CP_LOWALTITUDEDUST_SUPERSONIC_FX"> <DefaultTemplateParameters> <FX_GUID>{B46DEBE7-86DD-4E13-91E7-9EB419697E56}</FX_GUID> <FX_NAME>FX_LOW_ALTITUDE_DUST_FX2</FX_NAME> <FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID> <FX_NODE>__NO_NODE__</FX_NODE> <ENABLE_SURFACE_TYPE_0>DUST</ENABLE_SURFACE_TYPE_0> <ENABLE_SURFACE_TYPE_1>SNOW</ENABLE_SURFACE_TYPE_1> <ENABLE_SURFACE_TYPE_2>DIRT</ENABLE_SURFACE_TYPE_2> </DefaultTemplateParameters> <Component ID="FX_LOW_ALTITUDE_DUST_FX2_#FX_NODE#_#FX_CONTACT_POINT_ID#" Node="#FX_NODE#"> <UseTemplate Name="ASOBO_GT_FX"> <FX_CODE>(A:AIRSPEED MACH, mach) 0.9 ></FX_CODE> </UseTemplate> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- FX_GUID
- FX_NAME
- FX_CONTACT_POINT_ID
- FX_NODE
- ENABLE_SURFACE_TYPE_0
- ENABLE_SURFACE_TYPE_1
- ENABLE_SURFACE_TYPE_2
Parameters read:
- FX_NODE
- FX_CONTACT_POINT_ID
Components:
-
FX_LOW_ALTITUDE_DUST_FX2_#FX_NODE#_#FX_CONTACT_POINT_ID# (Node: #FX_NODE#)
Templates used:
-
ASOBO_GT_FX
Parameters set:
- FX_CODE
-
ASOBO_GT_FX
-
Default
-
ASOBO_FX_EXHAUST_HEAT
Definition from XML<Template Name="ASOBO_FX_EXHAUST_HEAT"> <DefaultTemplateParameters> <FX_GUID>{605EBB42-DA6B-4965-9199-9AE59BF7FD83}</FX_GUID> <FX_NAME>FX_EXHAUST_HEAT</FX_NAME> <FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID> <FX_NODE>__NO_NODE__</FX_NODE> </DefaultTemplateParameters> <Component ID="FX_EXHAUST_HEAT_#FX_NODE#" Node="#FX_NODE#"> <UseTemplate Name="ASOBO_GT_FX"> <FX_CODE>(A:GENERAL ENG COMBUSTION:1, Bool) 0 ></FX_CODE> </UseTemplate> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- FX_GUID
- FX_NAME
- FX_CONTACT_POINT_ID
- FX_NODE
Parameters read:
- FX_NODE
Components:
-
FX_EXHAUST_HEAT_#FX_NODE# (Node: #FX_NODE#)
Templates used:
-
ASOBO_GT_FX
Parameters set:
- FX_CODE
-
ASOBO_GT_FX
-
Default
-
ASOBO_FX_AFTERBURNER
Definition from XML<Template Name="ASOBO_FX_AFTERBURNER"> <Parameters Type="Default"> <FX_GUID>{4586DE45-3381-448F-937A-DF0A70DA1CB1}</FX_GUID> <FX_NAME>FX_AFTERBURNER</FX_NAME> <FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID> <FX_NODE>__NO_NODE__</FX_NODE> </Parameters> <Component ID="FX_AFTERBURNER" Node="#FX_NODE#"> <UseTemplate Name="ASOBO_GT_FX"/> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- FX_GUID
- FX_NAME
- FX_CONTACT_POINT_ID
- FX_NODE
-
Default
-
ASOBO_FX_AFTERBURNER_DARKSTAR
Definition from XML<Template Name="ASOBO_FX_AFTERBURNER_DARKSTAR"> <Parameters Type="Default"> <FX_GUID>{15F7D889-4962-4AC5-B47C-E6CC1153F3C0}</FX_GUID> <FX_NAME>FX_AFTERBURNER_DARKSTAR</FX_NAME> <FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID> <FX_NODE>__NO_NODE__</FX_NODE> </Parameters> <Component ID="FX_AFTERBURNER_DARKSTAR" Node="#FX_NODE#"> <UseTemplate Name="ASOBO_GT_FX"/> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- FX_GUID
- FX_NAME
- FX_CONTACT_POINT_ID
- FX_NODE
Parameters read:
- FX_NODE
Components:
-
FX_AFTERBURNER_DARKSTAR (Node: #FX_NODE#)
Templates used:
-
Default
-
ASOBO_FX_AFTERBURNER2
Definition from XML<Template Name="ASOBO_FX_AFTERBURNER2"> <Parameters Type="Default"> <FX_GUID>{76EB2C5C-0331-431D-86C0-E12A0CC39A5F}</FX_GUID> <FX_NAME>FX_AFTERBURNER2</FX_NAME> <FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID> <FX_NODE>__NO_NODE__</FX_NODE> </Parameters> <Component ID="FX_AFTERBURNER" Node="#FX_NODE#"> <UseTemplate Name="ASOBO_GT_FX"/> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- FX_GUID
- FX_NAME
- FX_CONTACT_POINT_ID
- FX_NODE
-
Default
-
ASOBO_FX_AFTERBURNER_HEAT
Definition from XML<Template Name="ASOBO_FX_AFTERBURNER_HEAT"> <Parameters Type="Default"> <FX_GUID>{3F443329-D4EF-4CF5-B71D-BEA3E3EBF5BA}</FX_GUID> <FX_NAME>FX_AFTERBURNER_HEAT</FX_NAME> <FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID> <FX_NODE>__NO_NODE__</FX_NODE> </Parameters> <Component ID="FX_AFTERBURNER_HEAT" Node="#FX_NODE#"> <UseTemplate Name="ASOBO_GT_FX"/> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- FX_GUID
- FX_NAME
- FX_CONTACT_POINT_ID
- FX_NODE
Parameters read:
- FX_NODE
Components:
-
FX_AFTERBURNER_HEAT (Node: #FX_NODE#)
Templates used:
-
Default
-
ASOBO_FX_GLIDER_BALAST_LOW_SPEED
Definition from XML<Template Name="ASOBO_FX_GLIDER_BALAST_LOW_SPEED"> <Parameters Type="Default"> <FX_GUID>{CAF32131-A4D7-4FC8-9831-83F3283C2575}</FX_GUID> <FX_NAME>FX_GLIDER_BALAST_LOW_SPEED</FX_NAME> <FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID> <FX_NODE>__NO_NODE__</FX_NODE> </Parameters> <Component ID="FX_GLIDER_BALAST_LOW_SPEED" Node="#FX_NODE#"> <UseTemplate Name="ASOBO_GT_FX"> <FX_CODE>(A:WATER BALLAST VALVE FLOW RATE:1, gph) 0 > (A:WATER BALLAST VALVE FLOW RATE:2, gph) 0 > or (A:SIM ON GROUND, Bool) 0 > and (A:AIRSPEED TRUE, knots) 40 < and</FX_CODE> </UseTemplate> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- FX_GUID
- FX_NAME
- FX_CONTACT_POINT_ID
- FX_NODE
Parameters read:
- FX_NODE
Components:
-
FX_GLIDER_BALAST_LOW_SPEED (Node: #FX_NODE#)
Templates used:
-
ASOBO_GT_FX
Parameters set:
- FX_CODE
-
ASOBO_GT_FX
-
Default
-
ASOBO_FX_GLIDER_BALAST_HIGH_SPEED
Definition from XML<Template Name="ASOBO_FX_GLIDER_BALAST_HIGH_SPEED"> <Parameters Type="Default"> <FX_GUID>{AA642D83-552F-46F5-992A-6A6AB82CBF18}</FX_GUID> <FX_NAME>FX_GLIDER_BALAST_HIGH_SPEED</FX_NAME> <FX_CONTACT_POINT_ID>-1</FX_CONTACT_POINT_ID> <FX_NODE>__NO_NODE__</FX_NODE> </Parameters> <Component ID="FX_GLIDER_BALAST_HIGH_SPEED" Node="#FX_NODE#"> <UseTemplate Name="ASOBO_GT_FX"> <FX_CODE>(A:WATER BALLAST VALVE FLOW RATE:1, gph) 0 > (A:WATER BALLAST VALVE FLOW RATE:2, gph) 0 > or (A:AIRSPEED TRUE, knots) 40 >= and</FX_CODE> </UseTemplate> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- FX_GUID
- FX_NAME
- FX_CONTACT_POINT_ID
- FX_NODE
Parameters read:
- FX_NODE
Components:
-
FX_GLIDER_BALAST_HIGH_SPEED (Node: #FX_NODE#)
Templates used:
-
ASOBO_GT_FX
Parameters set:
- FX_CODE
-
ASOBO_GT_FX
-
Default