[Go back to index]
Asobo\Transponder\Transponder.xml
Source XML
<ModelBehaviors>
<Include ModelBehaviorFile="Asobo\Generic.xml"/>
<Include ModelBehaviorFile="Asobo\NAVCOM\NavComSystem.xml"/>
<!-- Transponder composite presets -->
<!-- AS76A -->
<Template Name="ASOBO_Transponder_AS76A_Template">
<TemplateAlias>ASOBO_5Knobs_Transponder_Template</TemplateAlias>
<Parameters Type="Default">
<ID>1</ID>
</Parameters>
<UseTemplate Name="ASOBO_GT_Helper_Suffix_ID_Appender">
<TEMPLATE_TO_CALL>ASOBO_Transponder_AS76A_SubTemplate</TEMPLATE_TO_CALL>
</UseTemplate>
</Template>
<Template Name="ASOBO_Transponder_AS76A_SubTemplate">
<Parameters Type="Default">
<NODE_ID_KNOB_SETTING>TRANSPONDER_Knob#SUFFIX_ID#</NODE_ID_KNOB_SETTING>
<ANIM_NAME_KNOB_SETTING>TRANSPONDER_Knob#SUFFIX_ID#</ANIM_NAME_KNOB_SETTING>
<NODE_ID_IDT>TRANSPONDER_Push_IDT#SUFFIX_ID#</NODE_ID_IDT>
<ANIM_NAME_IDT>TRANSPONDER_Push_IDT#SUFFIX_ID#</ANIM_NAME_IDT>
<NODE_ID_IDENT_LIGHT>ANNUNCIATOR_Radio_Ident</NODE_ID_IDENT_LIGHT>
</Parameters>
<Loop>
<Setup>
<Param>DIGIT</Param>
<From>1</From>
<Inc>1</Inc>
<To>4</To>
</Setup>
<Do>
<Parameters Type="Default">
<Condition NotEmpty="NAME_KNOB_#DIGIT#">
<True>
<NODE_ID Process="Param">NAME_KNOB_#DIGIT#</NODE_ID>
<ANIM_NAME Process="Param">NAME_KNOB_#DIGIT#</ANIM_NAME>
</True>
<False>
<NODE_ID>TRANSPONDER_Knob_0#DIGIT##SUFFIX_ID#</NODE_ID>
<ANIM_NAME>TRANSPONDER_Knob_0#DIGIT##SUFFIX_ID#</ANIM_NAME>
</False>
</Condition>
</Parameters>
<UseTemplate Name="ASOBO_Transponder_Knob_Value_Template"/>
</Do>
</Loop>
<UseTemplate Name="ASOBO_Transponder_Push_IDT_Template">
<NODE_ID>#NODE_ID_IDT#</NODE_ID>
<ANIM_NAME>#ANIM_NAME_IDT#</ANIM_NAME>
</UseTemplate>
<UseTemplate Name="ASOBO_GT_Component_Emissive_Gauge">
<NODE_ID>#NODE_ID_IDENT_LIGHT#</NODE_ID>
<EMISSIVE_CODE>(A:TRANSPONDER IDENT:1, Bool)</EMISSIVE_CODE>
</UseTemplate>
<UseTemplate Name="ASOBO_Transponder_Knob_Setting_Template">
<NODE_ID>#NODE_ID_KNOB_SETTING#</NODE_ID>
<ANIM_NAME>#ANIM_NAME_KNOB_SETTING#</ANIM_NAME>
</UseTemplate>
</Template>
<!-- AS76C -->
<Template Name="ASOBO_Simple_Transponder_With_Knob_Template">
<UseTemplate Name="ASOBO_Transponder_AS76C_Template"/>
</Template>
<Template Name="ASOBO_Transponder_AS76C_Template">
<Parameters Type="Default">
<ID>1</ID>
</Parameters>
<UseTemplate Name="ASOBO_GT_Helper_Suffix_ID_Appender">
<TEMPLATE_TO_CALL>ASOBO_Transponder_AS76C_SubTemplate</TEMPLATE_TO_CALL>
</UseTemplate>
</Template>
<Template Name="ASOBO_Transponder_AS76C_SubTemplate">
<Parameters Type="Default">
<NODE_ID_KNOB_SETTING>TRANSPONDER_Knob#SUFFIX_ID#</NODE_ID_KNOB_SETTING>
<ANIM_NAME_KNOB_SETTING>TRANSPONDER_Knob#SUFFIX_ID#</ANIM_NAME_KNOB_SETTING>
<NODE_ID_FRAME>TRANSPONDER_Frame#SUFFIX_ID#</NODE_ID_FRAME>
<ANIM_NEVER_FAILS/>
<FAILURE>(A:CIRCUIT AVIONICS ON, Bool) (A:TRANSPONDER STATE:1, Enum) 0 > and</FAILURE>
<NORMALIZED_TIME_1>0.1</NORMALIZED_TIME_1>
<NORMALIZED_TIME_2>0.1</NORMALIZED_TIME_2>
<EMISSIVE_POTENTIOMETER>7</EMISSIVE_POTENTIOMETER>
<BUTTON_EMISSIVE_FACTOR>0.2</BUTTON_EMISSIVE_FACTOR>
</Parameters>
<Parameters Type="Override">
<PUSH_ID_1>IDT</PUSH_ID_1>
<EVENT_TYPE_IDT>K</EVENT_TYPE_IDT>
<EVENT_PUSH_IDT>XPNDR_IDENT_ON</EVENT_PUSH_IDT>
<TT_VALUE_IDT>(A:TRANSPONDER IDENT:1, Bool) @TT_OnOff_Cond</TT_VALUE_IDT>
<TT_VALUE_IS_DYNAMIC_IDT>True</TT_VALUE_IS_DYNAMIC_IDT>
<PUSH_ID_2>VFR</PUSH_ID_2>
<PUSH_ID_3>CLR</PUSH_ID_3>
<PUSH_ID_4>0</PUSH_ID_4>
<PUSH_ID_5>1</PUSH_ID_5>
<PUSH_ID_6>2</PUSH_ID_6>
<PUSH_ID_7>3</PUSH_ID_7>
<PUSH_ID_8>4</PUSH_ID_8>
<PUSH_ID_9>5</PUSH_ID_9>
<PUSH_ID_10>6</PUSH_ID_10>
<PUSH_ID_11>7</PUSH_ID_11>
</Parameters>
<Parameters Type="Default">
<!-- @TT_Placeholder_Description remove TT_DESCRIPTION_... below when all entries have been created and decomment TRANSPONDER_PUSH_DIGIT_ACTION -->
<TT_DESCRIPTION_ID_0/>
<TT_DESCRIPTION_ID_1/>
<TT_DESCRIPTION_ID_2/>
<TT_DESCRIPTION_ID_3/>
<TT_DESCRIPTION_ID_4/>
<TT_DESCRIPTION_ID_5/>
<TT_DESCRIPTION_ID_6/>
<TT_DESCRIPTION_ID_7/>
<Loop>
<Setup>
<Param>CUR_ID</Param>
<From>1</From>
<Inc>1</Inc>
<To>11</To>
</Setup>
<Do>
<Parameters Type="Override">
<ID Process="Param">PUSH_ID_#CUR_ID#</ID>
</Parameters>
<NODE_ID_#ID#>TRANSPONDER_Push_#ID##SUFFIX_ID#</NODE_ID_#ID#>
<ANIM_NAME_#ID#>TRANSPONDER_Push_#ID##SUFFIX_ID#</ANIM_NAME_#ID#>
<Condition>
<Test>
<GreaterOrEqual>
<Value>CUR_ID</Value>
<Number>4</Number>
</GreaterOrEqual>
</Test>
<True>
<TT_DESCRIPTION_ID_#ID#>@TT_Package.TRANSPONDER_PUSH_DIGIT_ACTION</TT_DESCRIPTION_ID_#ID#>
<TT_DESCRIPTION_INDEX>#ID#</TT_DESCRIPTION_INDEX>
<TOOLTIP_DISABLED_#ID#>True</TOOLTIP_DISABLED_#ID#>
</True>
<False>
<TT_DESCRIPTION_ID_#ID#>@TT_Package.TRANSPONDER_PUSH_#ID#_ACTION</TT_DESCRIPTION_ID_#ID#>
<TOOLTIP_TITLE_#ID#>@TT_Package.TRANSPONDER_PUSH_#ID#_TITLE</TOOLTIP_TITLE_#ID#>
<TOOLTIP_DISABLED_#ID#>False</TOOLTIP_DISABLED_#ID#>
</False>
</Condition>
</Do>
</Loop>
</Parameters>
<Loop>
<Setup>
<Param>CUR_ID</Param>
<From>1</From>
<Inc>1</Inc>
<To>11</To>
</Setup>
<Do>
<Parameters Type="Override">
<ID Process="Param">PUSH_ID_#CUR_ID#</ID>
</Parameters>
<Parameters Type="Override">
<NODE_ID Process="Param">NODE_ID_#ID#</NODE_ID>
<ANIM_NAME Process="Param">ANIM_NAME_#ID#</ANIM_NAME>
<TT_DESCRIPTION_ID Process="Param">TT_DESCRIPTION_ID_#ID#</TT_DESCRIPTION_ID>
<Condition NotEmpty="TOOLTIP_TITLE_#ID#">
<TOOLTIP_TITLE Process="Param">TOOLTIP_TITLE_#ID#</TOOLTIP_TITLE>
</Condition>
<Condition NotEmpty="EVENT_TYPE_#ID#">
<EVENT_TYPE Process="Param">EVENT_TYPE_#ID#</EVENT_TYPE>
</Condition>
<Condition NotEmpty="EVENT_PUSH_#ID#">
<EVENT_PUSH Process="Param">EVENT_PUSH_#ID#</EVENT_PUSH>
</Condition>
<Condition NotEmpty="TT_VALUE_#ID#">
<TT_VALUE Process="Param">TT_VALUE_#ID#</TT_VALUE>
</Condition>
<Condition NotEmpty="TT_VALUE_IS_DYNAMIC_#ID#">
<TT_VALUE_IS_DYNAMIC Process="Param">TT_VALUE_IS_DYNAMIC_#ID#</TT_VALUE_IS_DYNAMIC>
</Condition>
<TOOLTIP_DISABLED Process="Param">TOOLTIP_DISABLED_#ID#</TOOLTIP_DISABLED>
</Parameters>
<!-- @TT_Placeholder_Description remove parameters (the whole xml node) below when all placeholders have been replaced -->
<Parameters Type="Override">
<Condition Valid="TT_DESCRIPTION_ID">
<False>
<TT_DESCRIPTION>@TT_Placeholder_Description</TT_DESCRIPTION>
<TT_DESCRIPTION_IS_DYNAMIC>True</TT_DESCRIPTION_IS_DYNAMIC>
</False>
</Condition>
</Parameters>
<UseTemplate Name="ASOBO_Transponder_Push_ID_Template"/>
</Do>
</Loop>
<UseTemplate Name="ASOBO_GT_Component_Emissive_Gauge">
<NODE_ID>#NODE_ID_FRAME#</NODE_ID>
<POTENTIOMETER>#EMISSIVE_POTENTIOMETER#</POTENTIOMETER>
<EMISSIVE_CODE>(A:CIRCUIT GENERAL PANEL ON, Bool)</EMISSIVE_CODE>
</UseTemplate>
<UseTemplate Name="ASOBO_Transponder_Knob_Setting_Template">
<NODE_ID>#NODE_ID_KNOB_SETTING#</NODE_ID>
<ANIM_NAME>#ANIM_NAME_KNOB_SETTING#</ANIM_NAME>
<POS_OFF>0</POS_OFF>
<POS_STBY>1</POS_STBY>
<POS_TEST>2</POS_TEST>
<POS_ON>3</POS_ON>
<POS_ALT>4</POS_ALT>
</UseTemplate>
</Template>
<!-- ################################ -->
<!-- Transponder components templates -->
<!-- ################################ -->
<Template Name="ASOBO_Transponder_Knob_Value_Template">
<Parameters Type="Default">
<WWISE_EVENT>transponder_knob_value</WWISE_EVENT>
<COUNT>8</COUNT>
<STEP_INT Process="Int">10 4 #DIGIT# - pow</STEP_INT>
<Switch Param="DIGIT">
<Case Value="1">
<DIGIT_ID>THOUSANDS</DIGIT_ID>
<STEP_MAX_HEX_MASK>F000</STEP_MAX_HEX_MASK>
<STEP_MASK>7000</STEP_MASK>
<STEP>1000</STEP>
</Case>
<Case Value="2">
<DIGIT_ID>HUNDREDS</DIGIT_ID>
<STEP_MAX_HEX_MASK>0F00</STEP_MAX_HEX_MASK>
<STEP_MASK>0700</STEP_MASK>
<STEP>0100</STEP>
</Case>
<Case Value="3">
<DIGIT_ID>TENS</DIGIT_ID>
<STEP_MAX_HEX_MASK>00F0</STEP_MAX_HEX_MASK>
<STEP_MASK>0070</STEP_MASK>
<STEP>0010</STEP>
</Case>
<Case Value="4">
<DIGIT_ID>ONES</DIGIT_ID>
<STEP_MAX_HEX_MASK>000F</STEP_MAX_HEX_MASK>
<STEP_MASK>0007</STEP_MASK>
<STEP>0001</STEP>
</Case>
</Switch>
<INPUT_EVENT_ID_SOURCE>NAVCOM</INPUT_EVENT_ID_SOURCE>
</Parameters>
<Parameters Type="Default">
<TOOLTIP_TITLE>@TT_Package.TRANSPONDER_KNOB_CODE_TITLE</TOOLTIP_TITLE>
<TT_DESCRIPTION_ID>@TT_Package.TRANSPONDER_KNOB_CODE_#DIGIT_ID#_ACTION</TT_DESCRIPTION_ID>
<THRESHOLD_INPUT>0.0004</THRESHOLD_INPUT>
<THRESHOLD_MOUSE>0.01</THRESHOLD_MOUSE>
</Parameters>
<Parameters Type="Override">
<GET_DIGIT_VALUE>(A:TRANSPONDER CODE:1, Number) #STEP_INT# / int 10 %</GET_DIGIT_VALUE>
</Parameters>
<UseInputEvent ID="NAVCOM">
<ANIM>EXTERNAL</ANIM>
<!-- Override defaults -->
<KNOB_ID>Transponder_Code</KNOB_ID>
<NO_ANIM_VAR_UPDATE>True</NO_ANIM_VAR_UPDATE>
<INTERACTION_TYPE>Knob</INTERACTION_TYPE>
<!-- ################# -->
<GET_STATE_EXTERNAL>(A:TRANSPONDER CODE:1, Bco16)</GET_STATE_EXTERNAL>
<SET_STATE_EXTERNAL>(>K:XPNDR_SET)</SET_STATE_EXTERNAL>
<!-- Add binding for setting transponder code directly from a BCD -->
<BINDING_SET_0>Set_BCD</BINDING_SET_0>
<BINDING_SET_0_PARAM_0>p0 (>O:_TempConvVar, enum) (O:_TempConvVar, Bco16)</BINDING_SET_0_PARAM_0>
<BINDING_SET_0_PARAM_0_IS_DYNAMIC>True</BINDING_SET_0_PARAM_0_IS_DYNAMIC>
<!-- BCO16 is stored in as an hex value, we need to check the value after each increment to avoid illegal values .. -->
<INC_CODE_ADJUST_VALUE>
s0 0x000F & 0x0007 > if{ l0 0x0008 + sp0 }
l0 0x00F0 & 0x0070 > if{ l0 0x0080 + sp0 }
l0 0x0F00 & 0x0700 > if{ l0 0x0800 + sp0 }
l0 0xF000 & 0x7000 > if{ l0 0x8000 + sp0 }
l0
</INC_CODE_ADJUST_VALUE>
<DEC_CODE_ADJUST_VALUE>
s0 0x000F & 0x0007 > if{ l0 0x0008 - sp0 }
l0 0x00F0 & 0x0070 > if{ l0 0x0080 - sp0 }
l0 0x0F00 & 0x0700 > if{ l0 0x0800 - sp0 }
l0 0xF000 & 0x7000 > if{ l0 0x8000 - sp0 }
l0
</DEC_CODE_ADJUST_VALUE>
<MIN_VALUE>0x0000</MIN_VALUE>
<MAX_VALUE>0x7777</MAX_VALUE>
<GET_TT_VALUE_STATE>(A:TRANSPONDER CODE:1, Number)</GET_TT_VALUE_STATE>
<FORMAT_VALUE>'%d' @sprintf</FORMAT_VALUE>
<TOOLTIP_TITLE>@TT_Package.TRANSPONDER_KNOB_CODE_TITLE</TOOLTIP_TITLE>
<TT_DESCRIPTION_ID>@TT_Package.TRANSPONDER_KNOB_CODE_ACTION</TT_DESCRIPTION_ID>
</UseInputEvent>
<UseTemplate Name="ASOBO_NAVCOM_Alternative_Base_Template">
<KNOB_ID>Transponder_Code_#DIGIT_ID#</KNOB_ID>
<INTERACTION_TYPE>Knob</INTERACTION_TYPE>
<GET_TT_VALUE_STATE>#GET_DIGIT_VALUE#</GET_TT_VALUE_STATE>
<FORMAT_VALUE>'%d' @sprintf</FORMAT_VALUE>
<ANIM_CODE>800 #GET_DIGIT_VALUE# 100 * -</ANIM_CODE>
<ANIM_LENGTH>800</ANIM_LENGTH>
<ANIM_LAG>800</ANIM_LAG>
<INC_CODE>#GET_DIGIT_VALUE# p0 + 8 % (>B:#INPUT_EVENT_ID_SOURCE#_Transponder_Code_#DIGIT_ID#_Set)</INC_CODE>
<!-- have to check for negative modulo value as it can happen in RPN.. -->
<DEC_CODE>#GET_DIGIT_VALUE# p0 - 8 % s2 0 < if{ 8 l2 + sp2 } l2 (>B:#INPUT_EVENT_ID_SOURCE#_Transponder_Code_#DIGIT_ID#_Set)</DEC_CODE>
<!-- replace digit value using masks -->
<SET_PARAM_0>p0 0x#STEP# *</SET_PARAM_0>
<SET_PARAM_0_IS_DYNAMIC>True</SET_PARAM_0_IS_DYNAMIC>
<!-- isolate and set a digit value -->
<SET_STATE_EXTERNAL>(A:TRANSPONDER CODE:1, Bco16) 0x#STEP_MAX_HEX_MASK# 0xFFFF ^ & p0 0x#STEP_MASK# & + (>B:#INPUT_EVENT_ID_SOURCE#_Transponder_Code_Set)</SET_STATE_EXTERNAL>
</UseTemplate>
</Template>
<Template Name="ASOBO_Transponder_Push_IDT_Template">
<Parameters Type="Default">
<WWISE_EVENT_1>transponder_push_button_on</WWISE_EVENT_1>
<WWISE_EVENT_2>transponder_push_button_off</WWISE_EVENT_2>
<TT_DESCRIPTION_ID>@TT_Package.TRANSPONDER_PUSH_IDT_ACTION</TT_DESCRIPTION_ID>
<TOOLTIP_TITLE>@TT_Package.TRANSPONDER_PUSH_IDT_TITLE</TOOLTIP_TITLE>
</Parameters>
<Parameters Type="Override">
<INTERACTION_TYPE>Push</INTERACTION_TYPE>
</Parameters>
<UseTemplate Name="ASOBO_NAVCOM_Alternative_Base_Template">
<SET_STATE_EXTERNAL>(>K:XPNDR_IDENT_ON)</SET_STATE_EXTERNAL>
<BTN_ID>Transponder_Identify</BTN_ID>
<TT_VALUE>(A:TRANSPONDER IDENT:1, Bool) @TT_OnOff_Cond</TT_VALUE>
<TT_VALUE_IS_DYNAMIC>True</TT_VALUE_IS_DYNAMIC>
</UseTemplate>
</Template>
<Template Name="ASOBO_Transponder_Knob_Setting_Template">
<Parameters Type="Default">
<TYPE>OFF_STBY_ON_ALT_TEST</TYPE>
<TRANSPONDER_INDEX>1</TRANSPONDER_INDEX>
</Parameters>
<Parameters Type="Default">
<WWISE_EVENT>transponder_mode_knob</WWISE_EVENT>
<COUNT>4</COUNT>
<!-- position on knob is deifferent from enum value by default -->
<Switch Param="TYPE">
<Case Value="OFF_STBY_ON_ALT_TEST">
<POS_OFF>0</POS_OFF>
<POS_STBY>1</POS_STBY>
<POS_ON>2</POS_ON>
<POS_ALT>3</POS_ALT>
<POS_TEST>4</POS_TEST>
</Case>
<Case Value="OFF_STBY_GRND_ON_ALT">
<POS_OFF>0</POS_OFF>
<POS_STBY>1</POS_STBY>
<POS_GRND>2</POS_GRND>
<POS_ON>3</POS_ON>
<POS_ALT>4</POS_ALT>
</Case>
</Switch>
<INPUT_EVENT_ID_SOURCE>NAVCOM</INPUT_EVENT_ID_SOURCE>
</Parameters>
<Parameters Type="Override">
<ENUM_VAL_OFF>0</ENUM_VAL_OFF>
<ENUM_VAL_STBY>1</ENUM_VAL_STBY>
<ENUM_VAL_TEST>2</ENUM_VAL_TEST>
<ENUM_VAL_ON>3</ENUM_VAL_ON>
<ENUM_VAL_ALT>4</ENUM_VAL_ALT>
<ENUM_VAL_GRND>5</ENUM_VAL_GRND>
<SET_TRANSPONDER_STATE>(>A:TRANSPONDER STATE:#TRANSPONDER_INDEX#, Enum)</SET_TRANSPONDER_STATE>
<GET_TRANSPONDER_STATE>(A:TRANSPONDER STATE:#TRANSPONDER_INDEX#, Enum)</GET_TRANSPONDER_STATE>
<SIMVAR_TO_WATCH_0>TRANSPONDER STATE:#TRANSPONDER_INDEX#</SIMVAR_TO_WATCH_0>
<KNOB_ID>Transponder_Mode</KNOB_ID>
<USE_BTN_IE>True</USE_BTN_IE>
<NUM_STATES>5</NUM_STATES>
<INTERACTION_TYPE>Knob</INTERACTION_TYPE>
<TT_DESCRIPTION_ID>@TT_Package.AUDIOPANEL_KNOB_TRANSPONDER_ACTION_SET</TT_DESCRIPTION_ID>
<TOOLTIP_TITLE>@TT_Package.AUDIOPANEL_KNOB_TRANSPONDER_TITLE</TOOLTIP_TITLE>
<SWITCH_DIRECTION>Horizontal</SWITCH_DIRECTION>
<LEFTARROW>TurnLeft</LEFTARROW>
<RIGHTARROW>TurnRight</RIGHTARROW>
</Parameters>
<UseTemplate Name="ASOBO_NAVCOM_Alternative_Base_Template">
<PART_ID>TRANSPONDER_KNOB</PART_ID>
<GET_STATE_EXTERNAL>#GET_TRANSPONDER_STATE# sp0</GET_STATE_EXTERNAL>
<Switch Param="TYPE">
<Case Value="OFF_STBY_ON_ALT_TEST">
<ENUM_VAL_TO_POS_EXTERNAL>
l0 #ENUM_VAL_OFF# == if{ #POS_OFF# sp1 g2 }
l0 #ENUM_VAL_STBY# == if{ #POS_STBY# sp1 g2 }
l0 #ENUM_VAL_ON# == if{ #POS_ON# sp1 g2 }
l0 #ENUM_VAL_ALT# == if{ #POS_ALT# sp1 g2 }
l0 #ENUM_VAL_TEST# == l0 #ENUM_VAL_GRND# == or if{ #POS_TEST# sp1 g2 }
:2 l1
</ENUM_VAL_TO_POS_EXTERNAL>
</Case>
<Case Value="OFF_STBY_GRND_ON_ALT">
<ENUM_VAL_TO_POS_EXTERNAL>
l0 #ENUM_VAL_OFF# == if{ #POS_OFF# sp1 g2 }
l0 #ENUM_VAL_STBY# == if{ #POS_STBY# sp1 g2 }
l0 #ENUM_VAL_ON# == if{ #POS_ON# sp1 g2 }
l0 #ENUM_VAL_ALT# == if{ #POS_ALT# sp1 g2 }
l0 #ENUM_VAL_GRND# == l0 #ENUM_VAL_TEST# == or if{ #POS_GRND# sp1 g2 }
:2 l1
</ENUM_VAL_TO_POS_EXTERNAL>
</Case>
</Switch>
<!-- OFF -->
<TT_VALUE_#POS_OFF#>@TT_Package.GT_STATE_OFF</TT_VALUE_#POS_OFF#>
<SET_STATE_#POS_OFF#>#ENUM_VAL_OFF# #SET_TRANSPONDER_STATE#</SET_STATE_#POS_OFF#>
<STR_STATE_#POS_OFF#>Off</STR_STATE_#POS_OFF#>
<CODE_POS_#POS_OFF#>(>B:#INPUT_EVENT_ID_SOURCE#_#KNOB_ID#_Off)</CODE_POS_#POS_OFF#>
<STATE#POS_OFF#_TEST>(B:#INPUT_EVENT_ID_SOURCE#_#KNOB_ID#) #POS_OFF# ==</STATE#POS_OFF#_TEST>
<!-- STBY -->
<TT_VALUE_#POS_STBY#>@TT_Package.GT_STATE_STANDBY</TT_VALUE_#POS_STBY#>
<SET_STATE_#POS_STBY#>#ENUM_VAL_STBY# #SET_TRANSPONDER_STATE#</SET_STATE_#POS_STBY#>
<STR_STATE_#POS_STBY#>Standby</STR_STATE_#POS_STBY#>
<CODE_POS_#POS_STBY#>(>B:#INPUT_EVENT_ID_SOURCE#_#KNOB_ID#_Standby)</CODE_POS_#POS_STBY#>
<STATE#POS_STBY#_TEST>(B:#INPUT_EVENT_ID_SOURCE#_#KNOB_ID#) #POS_STBY# ==</STATE#POS_STBY#_TEST>
<!-- ON -->
<TT_VALUE_#POS_ON#>@TT_Package.GT_STATE_ON</TT_VALUE_#POS_ON#>
<SET_STATE_#POS_ON#>#ENUM_VAL_ON# #SET_TRANSPONDER_STATE#</SET_STATE_#POS_ON#>
<STR_STATE_#POS_ON#>On</STR_STATE_#POS_ON#>
<CODE_POS_#POS_ON#>(>B:#INPUT_EVENT_ID_SOURCE#_#KNOB_ID#_On)</CODE_POS_#POS_ON#>
<STATE#POS_ON#_TEST>(B:#INPUT_EVENT_ID_SOURCE#_#KNOB_ID#) #POS_ON# ==</STATE#POS_ON#_TEST>
<!-- ALT -->
<TT_VALUE_#POS_ALT#>@TT_Package.GT_STATE_ALT</TT_VALUE_#POS_ALT#>
<SET_STATE_#POS_ALT#>#ENUM_VAL_ALT# #SET_TRANSPONDER_STATE#</SET_STATE_#POS_ALT#>
<STR_STATE_#POS_ALT#>Alt</STR_STATE_#POS_ALT#>
<CODE_POS_#POS_ALT#>(>B:#INPUT_EVENT_ID_SOURCE#_#KNOB_ID#_Alt)</CODE_POS_#POS_ALT#>
<STATE#POS_ALT#_TEST>(B:#INPUT_EVENT_ID_SOURCE#_#KNOB_ID#) #POS_ALT# ==</STATE#POS_ALT#_TEST>
<Switch Param="TYPE">
<Case Value="OFF_STBY_ON_ALT_TEST">
<!-- TEST -->
<TT_VALUE_#POS_TEST#>@TT_Package.GT_STATE_TEST</TT_VALUE_#POS_TEST#>
<SET_STATE_#POS_TEST#>#ENUM_VAL_TEST# #SET_TRANSPONDER_STATE#</SET_STATE_#POS_TEST#>
<STR_STATE_#POS_TEST#>Test</STR_STATE_#POS_TEST#>
<CODE_POS_#POS_TEST#>(>B:#INPUT_EVENT_ID_SOURCE#_#KNOB_ID#_Test)</CODE_POS_#POS_TEST#>
<STATE#POS_TEST#_TEST>(B:#INPUT_EVENT_ID_SOURCE#_#KNOB_ID#) #POS_TEST# ==</STATE#POS_TEST#_TEST>
</Case>
<Case Value="OFF_STBY_GRND_ON_ALT">
<!-- GRND -->
<TT_VALUE_#POS_GRND#>@TT_Package.GT_STATE_GROUND</TT_VALUE_#POS_GRND#>
<SET_STATE_#POS_GRND#>#ENUM_VAL_GRND# #SET_TRANSPONDER_STATE#</SET_STATE_#POS_GRND#>
<STR_STATE_#POS_GRND#>Ground</STR_STATE_#POS_GRND#>
<CODE_POS_#POS_GRND#>(>B:#INPUT_EVENT_ID_SOURCE#_#KNOB_ID#_Ground)</CODE_POS_#POS_GRND#>
<STATE#POS_GRND#_TEST>(B:#INPUT_EVENT_ID_SOURCE#_#KNOB_ID#) #POS_GRND# ==</STATE#POS_GRND#_TEST>
</Case>
</Switch>
</UseTemplate>
</Template>
<Template Name="ASOBO_Transponder_Push_ID_Template">
<Parameters Type="Default">
<EMISSIVE_POTENTIOMETER>1</EMISSIVE_POTENTIOMETER>
<BUTTON_EMISSIVE_FACTOR>1</BUTTON_EMISSIVE_FACTOR>
<WWISE_EVENT_1>transponder_push_button_on</WWISE_EVENT_1>
<NORMALIZED_TIME_1>0.1</NORMALIZED_TIME_1>
<WWISE_EVENT_2>transponder_push_button_off</WWISE_EVENT_2>
<NORMALIZED_TIME_2>0.1</NORMALIZED_TIME_2>
<PART_ID>TRANSPONDER_Push_#ID#</PART_ID>
<EVENT_PUSH>Transponder#ID#</EVENT_PUSH>
<EVENT_TYPE>H</EVENT_TYPE>
</Parameters>
<UseTemplate Name="ASOBO_NAVCOM_Alternative_Base_Template">
<BTN_ID>Transponder_#ID#</BTN_ID>
<SET_STATE_EXTERNAL>p0 if{ (>#EVENT_TYPE#:#EVENT_PUSH#) }</SET_STATE_EXTERNAL>
<EMISSIVE_CODE>(A:CIRCUIT GENERAL PANEL ON, Bool) (A:LIGHT POTENTIOMETER:#EMISSIVE_POTENTIOMETER#, percent over 100) * #BUTTON_EMISSIVE_FACTOR# *</EMISSIVE_CODE>
</UseTemplate>
</Template>
</ModelBehaviors>
Includes
- ModelBehaviorFile: Asobo\Generic.xml
- ModelBehaviorFile: Asobo\NAVCOM\NavComSystem.xml
Templates
Template list
- ASOBO_Transponder_AS76A_Template [ASOBO_5Knobs_Transponder_Template]
- ASOBO_Transponder_AS76A_SubTemplate
- ASOBO_Simple_Transponder_With_Knob_Template
- ASOBO_Transponder_AS76C_Template
- ASOBO_Transponder_AS76C_SubTemplate
- ASOBO_Transponder_Knob_Value_Template
- ASOBO_Transponder_Push_IDT_Template
- ASOBO_Transponder_Knob_Setting_Template
- ASOBO_Transponder_Push_ID_Template
-
ASOBO_Transponder_AS76A_Template
[ASOBO_5Knobs_Transponder_Template]Definition from XML<Template Name="ASOBO_Transponder_AS76A_Template"> <TemplateAlias>ASOBO_5Knobs_Transponder_Template</TemplateAlias> <Parameters Type="Default"> <ID>1</ID> </Parameters> <UseTemplate Name="ASOBO_GT_Helper_Suffix_ID_Appender"> <TEMPLATE_TO_CALL>ASOBO_Transponder_AS76A_SubTemplate</TEMPLATE_TO_CALL> </UseTemplate> </Template>Parameters initialization:
-
Default
Parameters set:
- ID
Templates used:
-
ASOBO_GT_Helper_Suffix_ID_Appender
- May include a subtemplate using the parameter 'TEMPLATE_TO_CALL' and resolve to the following template(s):
Parameters set:
- TEMPLATE_TO_CALL
-
Default
-
ASOBO_Transponder_AS76A_SubTemplate
Definition from XML<Template Name="ASOBO_Transponder_AS76A_SubTemplate"> <Parameters Type="Default"> <NODE_ID_KNOB_SETTING>TRANSPONDER_Knob#SUFFIX_ID#</NODE_ID_KNOB_SETTING> <ANIM_NAME_KNOB_SETTING>TRANSPONDER_Knob#SUFFIX_ID#</ANIM_NAME_KNOB_SETTING> <NODE_ID_IDT>TRANSPONDER_Push_IDT#SUFFIX_ID#</NODE_ID_IDT> <ANIM_NAME_IDT>TRANSPONDER_Push_IDT#SUFFIX_ID#</ANIM_NAME_IDT> <NODE_ID_IDENT_LIGHT>ANNUNCIATOR_Radio_Ident</NODE_ID_IDENT_LIGHT> </Parameters> <Loop> <Setup> <Param>DIGIT</Param> <From>1</From> <Inc>1</Inc> <To>4</To> </Setup> <Do> <Parameters Type="Default"> <Condition NotEmpty="NAME_KNOB_#DIGIT#"> <True> <NODE_ID Process="Param">NAME_KNOB_#DIGIT#</NODE_ID> <ANIM_NAME Process="Param">NAME_KNOB_#DIGIT#</ANIM_NAME> </True> <False> <NODE_ID>TRANSPONDER_Knob_0#DIGIT##SUFFIX_ID#</NODE_ID> <ANIM_NAME>TRANSPONDER_Knob_0#DIGIT##SUFFIX_ID#</ANIM_NAME> </False> </Condition> </Parameters> <UseTemplate Name="ASOBO_Transponder_Knob_Value_Template"/> </Do> </Loop> <UseTemplate Name="ASOBO_Transponder_Push_IDT_Template"> <NODE_ID>#NODE_ID_IDT#</NODE_ID> <ANIM_NAME>#ANIM_NAME_IDT#</ANIM_NAME> </UseTemplate> <UseTemplate Name="ASOBO_GT_Component_Emissive_Gauge"> <NODE_ID>#NODE_ID_IDENT_LIGHT#</NODE_ID> <EMISSIVE_CODE>(A:TRANSPONDER IDENT:1, Bool)</EMISSIVE_CODE> </UseTemplate> <UseTemplate Name="ASOBO_Transponder_Knob_Setting_Template"> <NODE_ID>#NODE_ID_KNOB_SETTING#</NODE_ID> <ANIM_NAME>#ANIM_NAME_KNOB_SETTING#</ANIM_NAME> </UseTemplate> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID_KNOB_SETTING (using SUFFIX_ID)
- ANIM_NAME_KNOB_SETTING (using SUFFIX_ID)
- NODE_ID_IDT (using SUFFIX_ID)
- ANIM_NAME_IDT (using SUFFIX_ID)
- NODE_ID_IDENT_LIGHT
Parameters set:
- DIGIT
Templates used:
- ASOBO_Transponder_Knob_Value_Template
-
ASOBO_Transponder_Push_IDT_Template
Parameters set:
- NODE_ID (using NODE_ID_IDT)
- ANIM_NAME (using ANIM_NAME_IDT)
-
ASOBO_GT_Component_Emissive_Gauge
Parameters set:
- NODE_ID (using NODE_ID_IDENT_LIGHT)
- EMISSIVE_CODE
-
ASOBO_Transponder_Knob_Setting_Template
Parameters set:
- NODE_ID (using NODE_ID_KNOB_SETTING)
- ANIM_NAME (using ANIM_NAME_KNOB_SETTING)
Condition: NotEmpty(NAME_KNOB_#DIGIT#)
-
Case: True
Parameters set:
- NODE_ID (using DIGIT)
- ANIM_NAME (using DIGIT)
-
Case: False
Parameters set:
- NODE_ID (using DIGIT, SUFFIX_ID)
- ANIM_NAME (using DIGIT, SUFFIX_ID)
-
Default
-
ASOBO_Simple_Transponder_With_Knob_Template
Definition from XML<Template Name="ASOBO_Simple_Transponder_With_Knob_Template"> <UseTemplate Name="ASOBO_Transponder_AS76C_Template"/> </Template>Templates used:
-
ASOBO_Transponder_AS76C_Template
Definition from XML<Template Name="ASOBO_Transponder_AS76C_Template"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <UseTemplate Name="ASOBO_GT_Helper_Suffix_ID_Appender"> <TEMPLATE_TO_CALL>ASOBO_Transponder_AS76C_SubTemplate</TEMPLATE_TO_CALL> </UseTemplate> </Template>Parameters initialization:
-
Default
Parameters set:
- ID
Templates used:
-
ASOBO_GT_Helper_Suffix_ID_Appender
- May include a subtemplate using the parameter 'TEMPLATE_TO_CALL' and resolve to the following template(s):
Parameters set:
- TEMPLATE_TO_CALL
-
Default
-
ASOBO_Transponder_AS76C_SubTemplate
Definition from XML<Template Name="ASOBO_Transponder_AS76C_SubTemplate"> <Parameters Type="Default"> <NODE_ID_KNOB_SETTING>TRANSPONDER_Knob#SUFFIX_ID#</NODE_ID_KNOB_SETTING> <ANIM_NAME_KNOB_SETTING>TRANSPONDER_Knob#SUFFIX_ID#</ANIM_NAME_KNOB_SETTING> <NODE_ID_FRAME>TRANSPONDER_Frame#SUFFIX_ID#</NODE_ID_FRAME> <ANIM_NEVER_FAILS/> <FAILURE>(A:CIRCUIT AVIONICS ON, Bool) (A:TRANSPONDER STATE:1, Enum) 0 > and</FAILURE> <NORMALIZED_TIME_1>0.1</NORMALIZED_TIME_1> <NORMALIZED_TIME_2>0.1</NORMALIZED_TIME_2> <EMISSIVE_POTENTIOMETER>7</EMISSIVE_POTENTIOMETER> <BUTTON_EMISSIVE_FACTOR>0.2</BUTTON_EMISSIVE_FACTOR> </Parameters> <Parameters Type="Override"> <PUSH_ID_1>IDT</PUSH_ID_1> <EVENT_TYPE_IDT>K</EVENT_TYPE_IDT> <EVENT_PUSH_IDT>XPNDR_IDENT_ON</EVENT_PUSH_IDT> <TT_VALUE_IDT>(A:TRANSPONDER IDENT:1, Bool) @TT_OnOff_Cond</TT_VALUE_IDT> <TT_VALUE_IS_DYNAMIC_IDT>True</TT_VALUE_IS_DYNAMIC_IDT> <PUSH_ID_2>VFR</PUSH_ID_2> <PUSH_ID_3>CLR</PUSH_ID_3> <PUSH_ID_4>0</PUSH_ID_4> <PUSH_ID_5>1</PUSH_ID_5> <PUSH_ID_6>2</PUSH_ID_6> <PUSH_ID_7>3</PUSH_ID_7> <PUSH_ID_8>4</PUSH_ID_8> <PUSH_ID_9>5</PUSH_ID_9> <PUSH_ID_10>6</PUSH_ID_10> <PUSH_ID_11>7</PUSH_ID_11> </Parameters> <Parameters Type="Default"> <TT_DESCRIPTION_ID_0/> <TT_DESCRIPTION_ID_1/> <TT_DESCRIPTION_ID_2/> <TT_DESCRIPTION_ID_3/> <TT_DESCRIPTION_ID_4/> <TT_DESCRIPTION_ID_5/> <TT_DESCRIPTION_ID_6/> <TT_DESCRIPTION_ID_7/> <Loop> <Setup> <Param>CUR_ID</Param> <From>1</From> <Inc>1</Inc> <To>11</To> </Setup> <Do> <Parameters Type="Override"> <ID Process="Param">PUSH_ID_#CUR_ID#</ID> </Parameters> <NODE_ID_#ID#>TRANSPONDER_Push_#ID##SUFFIX_ID#</NODE_ID_#ID#> <ANIM_NAME_#ID#>TRANSPONDER_Push_#ID##SUFFIX_ID#</ANIM_NAME_#ID#> <Condition> <Test> <GreaterOrEqual> <Value>CUR_ID</Value> <Number>4</Number> </GreaterOrEqual> </Test> <True> <TT_DESCRIPTION_ID_#ID#>@TT_Package.TRANSPONDER_PUSH_DIGIT_ACTION</TT_DESCRIPTION_ID_#ID#> <TT_DESCRIPTION_INDEX>#ID#</TT_DESCRIPTION_INDEX> <TOOLTIP_DISABLED_#ID#>True</TOOLTIP_DISABLED_#ID#> </True> <False> <TT_DESCRIPTION_ID_#ID#>@TT_Package.TRANSPONDER_PUSH_#ID#_ACTION</TT_DESCRIPTION_ID_#ID#> <TOOLTIP_TITLE_#ID#>@TT_Package.TRANSPONDER_PUSH_#ID#_TITLE</TOOLTIP_TITLE_#ID#> <TOOLTIP_DISABLED_#ID#>False</TOOLTIP_DISABLED_#ID#> </False> </Condition> </Do> </Loop> </Parameters> <Loop> <Setup> <Param>CUR_ID</Param> <From>1</From> <Inc>1</Inc> <To>11</To> </Setup> <Do> <Parameters Type="Override"> <ID Process="Param">PUSH_ID_#CUR_ID#</ID> </Parameters> <Parameters Type="Override"> <NODE_ID Process="Param">NODE_ID_#ID#</NODE_ID> <ANIM_NAME Process="Param">ANIM_NAME_#ID#</ANIM_NAME> <TT_DESCRIPTION_ID Process="Param">TT_DESCRIPTION_ID_#ID#</TT_DESCRIPTION_ID> <Condition NotEmpty="TOOLTIP_TITLE_#ID#"> <TOOLTIP_TITLE Process="Param">TOOLTIP_TITLE_#ID#</TOOLTIP_TITLE> </Condition> <Condition NotEmpty="EVENT_TYPE_#ID#"> <EVENT_TYPE Process="Param">EVENT_TYPE_#ID#</EVENT_TYPE> </Condition> <Condition NotEmpty="EVENT_PUSH_#ID#"> <EVENT_PUSH Process="Param">EVENT_PUSH_#ID#</EVENT_PUSH> </Condition> <Condition NotEmpty="TT_VALUE_#ID#"> <TT_VALUE Process="Param">TT_VALUE_#ID#</TT_VALUE> </Condition> <Condition NotEmpty="TT_VALUE_IS_DYNAMIC_#ID#"> <TT_VALUE_IS_DYNAMIC Process="Param">TT_VALUE_IS_DYNAMIC_#ID#</TT_VALUE_IS_DYNAMIC> </Condition> <TOOLTIP_DISABLED Process="Param">TOOLTIP_DISABLED_#ID#</TOOLTIP_DISABLED> </Parameters> <Parameters Type="Override"> <Condition Valid="TT_DESCRIPTION_ID"> <False> <TT_DESCRIPTION>@TT_Placeholder_Description</TT_DESCRIPTION> <TT_DESCRIPTION_IS_DYNAMIC>True</TT_DESCRIPTION_IS_DYNAMIC> </False> </Condition> </Parameters> <UseTemplate Name="ASOBO_Transponder_Push_ID_Template"/> </Do> </Loop> <UseTemplate Name="ASOBO_GT_Component_Emissive_Gauge"> <NODE_ID>#NODE_ID_FRAME#</NODE_ID> <POTENTIOMETER>#EMISSIVE_POTENTIOMETER#</POTENTIOMETER> <EMISSIVE_CODE>(A:CIRCUIT GENERAL PANEL ON, Bool)</EMISSIVE_CODE> </UseTemplate> <UseTemplate Name="ASOBO_Transponder_Knob_Setting_Template"> <NODE_ID>#NODE_ID_KNOB_SETTING#</NODE_ID> <ANIM_NAME>#ANIM_NAME_KNOB_SETTING#</ANIM_NAME> <POS_OFF>0</POS_OFF> <POS_STBY>1</POS_STBY> <POS_TEST>2</POS_TEST> <POS_ON>3</POS_ON> <POS_ALT>4</POS_ALT> </UseTemplate> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID_KNOB_SETTING (using SUFFIX_ID)
- ANIM_NAME_KNOB_SETTING (using SUFFIX_ID)
- NODE_ID_FRAME (using SUFFIX_ID)
- ANIM_NEVER_FAILS
- FAILURE
- NORMALIZED_TIME_1
- NORMALIZED_TIME_2
- EMISSIVE_POTENTIOMETER
- BUTTON_EMISSIVE_FACTOR
-
Override
Parameters set:
- PUSH_ID_1
- EVENT_TYPE_IDT
- EVENT_PUSH_IDT
- TT_VALUE_IDT
- TT_VALUE_IS_DYNAMIC_IDT
- PUSH_ID_2
- PUSH_ID_3
- PUSH_ID_4
- PUSH_ID_5
- PUSH_ID_6
- PUSH_ID_7
- PUSH_ID_8
- PUSH_ID_9
- PUSH_ID_10
- PUSH_ID_11
-
Default
Parameters set:
- TT_DESCRIPTION_ID_0
- TT_DESCRIPTION_ID_1
- TT_DESCRIPTION_ID_2
- TT_DESCRIPTION_ID_3
- TT_DESCRIPTION_ID_4
- TT_DESCRIPTION_ID_5
- TT_DESCRIPTION_ID_6
- TT_DESCRIPTION_ID_7
- CUR_ID
- ID (using CUR_ID)
- NODE_ID_#ID# (using ID, SUFFIX_ID)
- ANIM_NAME_#ID# (using ID, SUFFIX_ID)
Condition: Test(CUR_ID)
-
Case: True
Parameters set:
- TT_DESCRIPTION_ID_#ID#
- TT_DESCRIPTION_INDEX (using ID)
- TOOLTIP_DISABLED_#ID#
-
Case: False
Parameters set:
- TT_DESCRIPTION_ID_#ID# (using ID)
- TOOLTIP_TITLE_#ID# (using ID)
- TOOLTIP_DISABLED_#ID#
Parameters set:
- CUR_ID
- ID (using CUR_ID)
- NODE_ID (using ID)
- ANIM_NAME (using ID)
- TT_DESCRIPTION_ID (using ID)
- TOOLTIP_DISABLED (using ID)
Templates used:
- ASOBO_Transponder_Push_ID_Template
-
ASOBO_GT_Component_Emissive_Gauge
Parameters set:
- NODE_ID (using NODE_ID_FRAME)
- POTENTIOMETER (using EMISSIVE_POTENTIOMETER)
- EMISSIVE_CODE
-
ASOBO_Transponder_Knob_Setting_Template
Parameters set:
- NODE_ID (using NODE_ID_KNOB_SETTING)
- ANIM_NAME (using ANIM_NAME_KNOB_SETTING)
- POS_OFF
- POS_STBY
- POS_TEST
- POS_ON
- POS_ALT
Condition: NotEmpty(TOOLTIP_TITLE_#ID#)
-
Case: True
Parameters set:
- TOOLTIP_TITLE (using ID)
Condition: NotEmpty(EVENT_TYPE_#ID#)
-
Case: True
Parameters set:
- EVENT_TYPE (using ID)
Condition: NotEmpty(EVENT_PUSH_#ID#)
-
Case: True
Parameters set:
- EVENT_PUSH (using ID)
Condition: NotEmpty(TT_VALUE_#ID#)
-
Case: True
Parameters set:
- TT_VALUE (using ID)
Condition: NotEmpty(TT_VALUE_IS_DYNAMIC_#ID#)
-
Case: True
Parameters set:
- TT_VALUE_IS_DYNAMIC (using ID)
Condition: Valid(TT_DESCRIPTION_ID)
-
Case: False
Parameters set:
- TT_DESCRIPTION
- TT_DESCRIPTION_IS_DYNAMIC
-
Default
-
ASOBO_Transponder_Knob_Value_Template
Definition from XML<Template Name="ASOBO_Transponder_Knob_Value_Template"> <Parameters Type="Default"> <WWISE_EVENT>transponder_knob_value</WWISE_EVENT> <COUNT>8</COUNT> <STEP_INT Process="Int">10 4 #DIGIT# - pow</STEP_INT> <Switch Param="DIGIT"> <Case Value="1"> <DIGIT_ID>THOUSANDS</DIGIT_ID> <STEP_MAX_HEX_MASK>F000</STEP_MAX_HEX_MASK> <STEP_MASK>7000</STEP_MASK> <STEP>1000</STEP> </Case> <Case Value="2"> <DIGIT_ID>HUNDREDS</DIGIT_ID> <STEP_MAX_HEX_MASK>0F00</STEP_MAX_HEX_MASK> <STEP_MASK>0700</STEP_MASK> <STEP>0100</STEP> </Case> <Case Value="3"> <DIGIT_ID>TENS</DIGIT_ID> <STEP_MAX_HEX_MASK>00F0</STEP_MAX_HEX_MASK> <STEP_MASK>0070</STEP_MASK> <STEP>0010</STEP> </Case> <Case Value="4"> <DIGIT_ID>ONES</DIGIT_ID> <STEP_MAX_HEX_MASK>000F</STEP_MAX_HEX_MASK> <STEP_MASK>0007</STEP_MASK> <STEP>0001</STEP> </Case> </Switch> <INPUT_EVENT_ID_SOURCE>NAVCOM</INPUT_EVENT_ID_SOURCE> </Parameters> <Parameters Type="Default"> <TOOLTIP_TITLE>@TT_Package.TRANSPONDER_KNOB_CODE_TITLE</TOOLTIP_TITLE> <TT_DESCRIPTION_ID>@TT_Package.TRANSPONDER_KNOB_CODE_#DIGIT_ID#_ACTION</TT_DESCRIPTION_ID> <THRESHOLD_INPUT>0.0004</THRESHOLD_INPUT> <THRESHOLD_MOUSE>0.01</THRESHOLD_MOUSE> </Parameters> <Parameters Type="Override"> <GET_DIGIT_VALUE>(A:TRANSPONDER CODE:1, Number) #STEP_INT# / int 10 %</GET_DIGIT_VALUE> </Parameters> <UseInputEvent ID="NAVCOM"> <ANIM>EXTERNAL</ANIM> <KNOB_ID>Transponder_Code</KNOB_ID> <NO_ANIM_VAR_UPDATE>True</NO_ANIM_VAR_UPDATE> <INTERACTION_TYPE>Knob</INTERACTION_TYPE> <GET_STATE_EXTERNAL>(A:TRANSPONDER CODE:1, Bco16)</GET_STATE_EXTERNAL> <SET_STATE_EXTERNAL>(>K:XPNDR_SET)</SET_STATE_EXTERNAL> <BINDING_SET_0>Set_BCD</BINDING_SET_0> <BINDING_SET_0_PARAM_0>p0 (>O:_TempConvVar, enum) (O:_TempConvVar, Bco16)</BINDING_SET_0_PARAM_0> <BINDING_SET_0_PARAM_0_IS_DYNAMIC>True</BINDING_SET_0_PARAM_0_IS_DYNAMIC> <INC_CODE_ADJUST_VALUE> s0 0x000F & 0x0007 > if{ l0 0x0008 + sp0 } l0 0x00F0 & 0x0070 > if{ l0 0x0080 + sp0 } l0 0x0F00 & 0x0700 > if{ l0 0x0800 + sp0 } l0 0xF000 & 0x7000 > if{ l0 0x8000 + sp0 } l0 </INC_CODE_ADJUST_VALUE> <DEC_CODE_ADJUST_VALUE> s0 0x000F & 0x0007 > if{ l0 0x0008 - sp0 } l0 0x00F0 & 0x0070 > if{ l0 0x0080 - sp0 } l0 0x0F00 & 0x0700 > if{ l0 0x0800 - sp0 } l0 0xF000 & 0x7000 > if{ l0 0x8000 - sp0 } l0 </DEC_CODE_ADJUST_VALUE> <MIN_VALUE>0x0000</MIN_VALUE> <MAX_VALUE>0x7777</MAX_VALUE> <GET_TT_VALUE_STATE>(A:TRANSPONDER CODE:1, Number)</GET_TT_VALUE_STATE> <FORMAT_VALUE>'%d' @sprintf</FORMAT_VALUE> <TOOLTIP_TITLE>@TT_Package.TRANSPONDER_KNOB_CODE_TITLE</TOOLTIP_TITLE> <TT_DESCRIPTION_ID>@TT_Package.TRANSPONDER_KNOB_CODE_ACTION</TT_DESCRIPTION_ID> </UseInputEvent> <UseTemplate Name="ASOBO_NAVCOM_Alternative_Base_Template"> <KNOB_ID>Transponder_Code_#DIGIT_ID#</KNOB_ID> <INTERACTION_TYPE>Knob</INTERACTION_TYPE> <GET_TT_VALUE_STATE>#GET_DIGIT_VALUE#</GET_TT_VALUE_STATE> <FORMAT_VALUE>'%d' @sprintf</FORMAT_VALUE> <ANIM_CODE>800 #GET_DIGIT_VALUE# 100 * -</ANIM_CODE> <ANIM_LENGTH>800</ANIM_LENGTH> <ANIM_LAG>800</ANIM_LAG> <INC_CODE>#GET_DIGIT_VALUE# p0 + 8 % (>B:#INPUT_EVENT_ID_SOURCE#_Transponder_Code_#DIGIT_ID#_Set)</INC_CODE> <DEC_CODE>#GET_DIGIT_VALUE# p0 - 8 % s2 0 < if{ 8 l2 + sp2 } l2 (>B:#INPUT_EVENT_ID_SOURCE#_Transponder_Code_#DIGIT_ID#_Set)</DEC_CODE> <SET_PARAM_0>p0 0x#STEP# *</SET_PARAM_0> <SET_PARAM_0_IS_DYNAMIC>True</SET_PARAM_0_IS_DYNAMIC> <SET_STATE_EXTERNAL>(A:TRANSPONDER CODE:1, Bco16) 0x#STEP_MAX_HEX_MASK# 0xFFFF ^ & p0 0x#STEP_MASK# & + (>B:#INPUT_EVENT_ID_SOURCE#_Transponder_Code_Set)</SET_STATE_EXTERNAL> </UseTemplate> </Template>Parameters initialization:
-
Default
Parameters set:
- WWISE_EVENT
- COUNT
- STEP_INT (using DIGIT)
- INPUT_EVENT_ID_SOURCE
Condition: Switch(DIGIT)
-
Case: 1
Parameters set:
- DIGIT_ID
- STEP_MAX_HEX_MASK
- STEP_MASK
- STEP
-
Case: 2
Parameters set:
- DIGIT_ID
- STEP_MAX_HEX_MASK
- STEP_MASK
- STEP
-
Case: 3
Parameters set:
- DIGIT_ID
- STEP_MAX_HEX_MASK
- STEP_MASK
- STEP
-
Case: 4
Parameters set:
- DIGIT_ID
- STEP_MAX_HEX_MASK
- STEP_MASK
- STEP
-
Default
Parameters set:
- TOOLTIP_TITLE
- TT_DESCRIPTION_ID (using DIGIT_ID)
- THRESHOLD_INPUT
- THRESHOLD_MOUSE
-
Override
Parameters set:
- GET_DIGIT_VALUE (using STEP_INT)
Parameters set:
- ANIM
- KNOB_ID
- NO_ANIM_VAR_UPDATE
- INTERACTION_TYPE
- GET_STATE_EXTERNAL
- SET_STATE_EXTERNAL
- BINDING_SET_0
- BINDING_SET_0_PARAM_0
- BINDING_SET_0_PARAM_0_IS_DYNAMIC
- INC_CODE_ADJUST_VALUE
- DEC_CODE_ADJUST_VALUE
- MIN_VALUE
- MAX_VALUE
- GET_TT_VALUE_STATE
- FORMAT_VALUE
- TOOLTIP_TITLE
- TT_DESCRIPTION_ID
Templates used:
-
ASOBO_NAVCOM_Alternative_Base_Template
Parameters set:
- KNOB_ID (using DIGIT_ID)
- INTERACTION_TYPE
- GET_TT_VALUE_STATE (using GET_DIGIT_VALUE)
- FORMAT_VALUE
- ANIM_CODE (using GET_DIGIT_VALUE)
- ANIM_LENGTH
- ANIM_LAG
- INC_CODE (using GET_DIGIT_VALUE, INPUT_EVENT_ID_SOURCE, DIGIT_ID)
- DEC_CODE (using GET_DIGIT_VALUE, INPUT_EVENT_ID_SOURCE, DIGIT_ID)
- SET_PARAM_0 (using STEP)
- SET_PARAM_0_IS_DYNAMIC
- SET_STATE_EXTERNAL (using STEP_MAX_HEX_MASK, STEP_MASK, INPUT_EVENT_ID_SOURCE)
-
Default
-
ASOBO_Transponder_Push_IDT_Template
Definition from XML<Template Name="ASOBO_Transponder_Push_IDT_Template"> <Parameters Type="Default"> <WWISE_EVENT_1>transponder_push_button_on</WWISE_EVENT_1> <WWISE_EVENT_2>transponder_push_button_off</WWISE_EVENT_2> <TT_DESCRIPTION_ID>@TT_Package.TRANSPONDER_PUSH_IDT_ACTION</TT_DESCRIPTION_ID> <TOOLTIP_TITLE>@TT_Package.TRANSPONDER_PUSH_IDT_TITLE</TOOLTIP_TITLE> </Parameters> <Parameters Type="Override"> <INTERACTION_TYPE>Push</INTERACTION_TYPE> </Parameters> <UseTemplate Name="ASOBO_NAVCOM_Alternative_Base_Template"> <SET_STATE_EXTERNAL>(>K:XPNDR_IDENT_ON)</SET_STATE_EXTERNAL> <BTN_ID>Transponder_Identify</BTN_ID> <TT_VALUE>(A:TRANSPONDER IDENT:1, Bool) @TT_OnOff_Cond</TT_VALUE> <TT_VALUE_IS_DYNAMIC>True</TT_VALUE_IS_DYNAMIC> </UseTemplate> </Template>Parameters initialization:
-
Default
Parameters set:
- WWISE_EVENT_1
- WWISE_EVENT_2
- TT_DESCRIPTION_ID
- TOOLTIP_TITLE
-
Override
Parameters set:
- INTERACTION_TYPE
Templates used:
-
ASOBO_NAVCOM_Alternative_Base_Template
Parameters set:
- SET_STATE_EXTERNAL
- BTN_ID
- TT_VALUE
- TT_VALUE_IS_DYNAMIC
-
Default
-
ASOBO_Transponder_Knob_Setting_Template
Definition from XML<Template Name="ASOBO_Transponder_Knob_Setting_Template"> <Parameters Type="Default"> <TYPE>OFF_STBY_ON_ALT_TEST</TYPE> <TRANSPONDER_INDEX>1</TRANSPONDER_INDEX> </Parameters> <Parameters Type="Default"> <WWISE_EVENT>transponder_mode_knob</WWISE_EVENT> <COUNT>4</COUNT> <Switch Param="TYPE"> <Case Value="OFF_STBY_ON_ALT_TEST"> <POS_OFF>0</POS_OFF> <POS_STBY>1</POS_STBY> <POS_ON>2</POS_ON> <POS_ALT>3</POS_ALT> <POS_TEST>4</POS_TEST> </Case> <Case Value="OFF_STBY_GRND_ON_ALT"> <POS_OFF>0</POS_OFF> <POS_STBY>1</POS_STBY> <POS_GRND>2</POS_GRND> <POS_ON>3</POS_ON> <POS_ALT>4</POS_ALT> </Case> </Switch> <INPUT_EVENT_ID_SOURCE>NAVCOM</INPUT_EVENT_ID_SOURCE> </Parameters> <Parameters Type="Override"> <ENUM_VAL_OFF>0</ENUM_VAL_OFF> <ENUM_VAL_STBY>1</ENUM_VAL_STBY> <ENUM_VAL_TEST>2</ENUM_VAL_TEST> <ENUM_VAL_ON>3</ENUM_VAL_ON> <ENUM_VAL_ALT>4</ENUM_VAL_ALT> <ENUM_VAL_GRND>5</ENUM_VAL_GRND> <SET_TRANSPONDER_STATE>(>A:TRANSPONDER STATE:#TRANSPONDER_INDEX#, Enum)</SET_TRANSPONDER_STATE> <GET_TRANSPONDER_STATE>(A:TRANSPONDER STATE:#TRANSPONDER_INDEX#, Enum)</GET_TRANSPONDER_STATE> <SIMVAR_TO_WATCH_0>TRANSPONDER STATE:#TRANSPONDER_INDEX#</SIMVAR_TO_WATCH_0> <KNOB_ID>Transponder_Mode</KNOB_ID> <USE_BTN_IE>True</USE_BTN_IE> <NUM_STATES>5</NUM_STATES> <INTERACTION_TYPE>Knob</INTERACTION_TYPE> <TT_DESCRIPTION_ID>@TT_Package.AUDIOPANEL_KNOB_TRANSPONDER_ACTION_SET</TT_DESCRIPTION_ID> <TOOLTIP_TITLE>@TT_Package.AUDIOPANEL_KNOB_TRANSPONDER_TITLE</TOOLTIP_TITLE> <SWITCH_DIRECTION>Horizontal</SWITCH_DIRECTION> <LEFTARROW>TurnLeft</LEFTARROW> <RIGHTARROW>TurnRight</RIGHTARROW> </Parameters> <UseTemplate Name="ASOBO_NAVCOM_Alternative_Base_Template"> <PART_ID>TRANSPONDER_KNOB</PART_ID> <GET_STATE_EXTERNAL>#GET_TRANSPONDER_STATE# sp0</GET_STATE_EXTERNAL> <Switch Param="TYPE"> <Case Value="OFF_STBY_ON_ALT_TEST"> <ENUM_VAL_TO_POS_EXTERNAL> l0 #ENUM_VAL_OFF# == if{ #POS_OFF# sp1 g2 } l0 #ENUM_VAL_STBY# == if{ #POS_STBY# sp1 g2 } l0 #ENUM_VAL_ON# == if{ #POS_ON# sp1 g2 } l0 #ENUM_VAL_ALT# == if{ #POS_ALT# sp1 g2 } l0 #ENUM_VAL_TEST# == l0 #ENUM_VAL_GRND# == or if{ #POS_TEST# sp1 g2 } :2 l1 </ENUM_VAL_TO_POS_EXTERNAL> </Case> <Case Value="OFF_STBY_GRND_ON_ALT"> <ENUM_VAL_TO_POS_EXTERNAL> l0 #ENUM_VAL_OFF# == if{ #POS_OFF# sp1 g2 } l0 #ENUM_VAL_STBY# == if{ #POS_STBY# sp1 g2 } l0 #ENUM_VAL_ON# == if{ #POS_ON# sp1 g2 } l0 #ENUM_VAL_ALT# == if{ #POS_ALT# sp1 g2 } l0 #ENUM_VAL_GRND# == l0 #ENUM_VAL_TEST# == or if{ #POS_GRND# sp1 g2 } :2 l1 </ENUM_VAL_TO_POS_EXTERNAL> </Case> </Switch> <TT_VALUE_#POS_OFF#>@TT_Package.GT_STATE_OFF</TT_VALUE_#POS_OFF#> <SET_STATE_#POS_OFF#>#ENUM_VAL_OFF# #SET_TRANSPONDER_STATE#</SET_STATE_#POS_OFF#> <STR_STATE_#POS_OFF#>Off</STR_STATE_#POS_OFF#> <CODE_POS_#POS_OFF#>(>B:#INPUT_EVENT_ID_SOURCE#_#KNOB_ID#_Off)</CODE_POS_#POS_OFF#> <STATE#POS_OFF#_TEST>(B:#INPUT_EVENT_ID_SOURCE#_#KNOB_ID#) #POS_OFF# ==</STATE#POS_OFF#_TEST> <TT_VALUE_#POS_STBY#>@TT_Package.GT_STATE_STANDBY</TT_VALUE_#POS_STBY#> <SET_STATE_#POS_STBY#>#ENUM_VAL_STBY# #SET_TRANSPONDER_STATE#</SET_STATE_#POS_STBY#> <STR_STATE_#POS_STBY#>Standby</STR_STATE_#POS_STBY#> <CODE_POS_#POS_STBY#>(>B:#INPUT_EVENT_ID_SOURCE#_#KNOB_ID#_Standby)</CODE_POS_#POS_STBY#> <STATE#POS_STBY#_TEST>(B:#INPUT_EVENT_ID_SOURCE#_#KNOB_ID#) #POS_STBY# ==</STATE#POS_STBY#_TEST> <TT_VALUE_#POS_ON#>@TT_Package.GT_STATE_ON</TT_VALUE_#POS_ON#> <SET_STATE_#POS_ON#>#ENUM_VAL_ON# #SET_TRANSPONDER_STATE#</SET_STATE_#POS_ON#> <STR_STATE_#POS_ON#>On</STR_STATE_#POS_ON#> <CODE_POS_#POS_ON#>(>B:#INPUT_EVENT_ID_SOURCE#_#KNOB_ID#_On)</CODE_POS_#POS_ON#> <STATE#POS_ON#_TEST>(B:#INPUT_EVENT_ID_SOURCE#_#KNOB_ID#) #POS_ON# ==</STATE#POS_ON#_TEST> <TT_VALUE_#POS_ALT#>@TT_Package.GT_STATE_ALT</TT_VALUE_#POS_ALT#> <SET_STATE_#POS_ALT#>#ENUM_VAL_ALT# #SET_TRANSPONDER_STATE#</SET_STATE_#POS_ALT#> <STR_STATE_#POS_ALT#>Alt</STR_STATE_#POS_ALT#> <CODE_POS_#POS_ALT#>(>B:#INPUT_EVENT_ID_SOURCE#_#KNOB_ID#_Alt)</CODE_POS_#POS_ALT#> <STATE#POS_ALT#_TEST>(B:#INPUT_EVENT_ID_SOURCE#_#KNOB_ID#) #POS_ALT# ==</STATE#POS_ALT#_TEST> <Switch Param="TYPE"> <Case Value="OFF_STBY_ON_ALT_TEST"> <TT_VALUE_#POS_TEST#>@TT_Package.GT_STATE_TEST</TT_VALUE_#POS_TEST#> <SET_STATE_#POS_TEST#>#ENUM_VAL_TEST# #SET_TRANSPONDER_STATE#</SET_STATE_#POS_TEST#> <STR_STATE_#POS_TEST#>Test</STR_STATE_#POS_TEST#> <CODE_POS_#POS_TEST#>(>B:#INPUT_EVENT_ID_SOURCE#_#KNOB_ID#_Test)</CODE_POS_#POS_TEST#> <STATE#POS_TEST#_TEST>(B:#INPUT_EVENT_ID_SOURCE#_#KNOB_ID#) #POS_TEST# ==</STATE#POS_TEST#_TEST> </Case> <Case Value="OFF_STBY_GRND_ON_ALT"> <TT_VALUE_#POS_GRND#>@TT_Package.GT_STATE_GROUND</TT_VALUE_#POS_GRND#> <SET_STATE_#POS_GRND#>#ENUM_VAL_GRND# #SET_TRANSPONDER_STATE#</SET_STATE_#POS_GRND#> <STR_STATE_#POS_GRND#>Ground</STR_STATE_#POS_GRND#> <CODE_POS_#POS_GRND#>(>B:#INPUT_EVENT_ID_SOURCE#_#KNOB_ID#_Ground)</CODE_POS_#POS_GRND#> <STATE#POS_GRND#_TEST>(B:#INPUT_EVENT_ID_SOURCE#_#KNOB_ID#) #POS_GRND# ==</STATE#POS_GRND#_TEST> </Case> </Switch> </UseTemplate> </Template>Parameters initialization:
-
Default
Parameters set:
- TYPE
- TRANSPONDER_INDEX
-
Default
Parameters set:
- WWISE_EVENT
- COUNT
- INPUT_EVENT_ID_SOURCE
Condition: Switch(TYPE)
-
Case: OFF_STBY_ON_ALT_TEST
Parameters set:
- POS_OFF
- POS_STBY
- POS_ON
- POS_ALT
- POS_TEST
-
Case: OFF_STBY_GRND_ON_ALT
Parameters set:
- POS_OFF
- POS_STBY
- POS_GRND
- POS_ON
- POS_ALT
-
Override
Parameters set:
- ENUM_VAL_OFF
- ENUM_VAL_STBY
- ENUM_VAL_TEST
- ENUM_VAL_ON
- ENUM_VAL_ALT
- ENUM_VAL_GRND
- SET_TRANSPONDER_STATE (using TRANSPONDER_INDEX)
- GET_TRANSPONDER_STATE (using TRANSPONDER_INDEX)
- SIMVAR_TO_WATCH_0 (using TRANSPONDER_INDEX)
- KNOB_ID
- USE_BTN_IE
- NUM_STATES
- INTERACTION_TYPE
- TT_DESCRIPTION_ID
- TOOLTIP_TITLE
- SWITCH_DIRECTION
- LEFTARROW
- RIGHTARROW
Templates used:
-
ASOBO_NAVCOM_Alternative_Base_Template
Parameters set:
- PART_ID
- GET_STATE_EXTERNAL (using GET_TRANSPONDER_STATE)
- TT_VALUE_#POS_OFF#
- SET_STATE_#POS_OFF# (using ENUM_VAL_OFF, SET_TRANSPONDER_STATE)
- STR_STATE_#POS_OFF#
- CODE_POS_#POS_OFF# (using INPUT_EVENT_ID_SOURCE, KNOB_ID)
- STATE#POS_OFF#_TEST (using INPUT_EVENT_ID_SOURCE, KNOB_ID, POS_OFF)
- TT_VALUE_#POS_STBY#
- SET_STATE_#POS_STBY# (using ENUM_VAL_STBY, SET_TRANSPONDER_STATE)
- STR_STATE_#POS_STBY#
- CODE_POS_#POS_STBY# (using INPUT_EVENT_ID_SOURCE, KNOB_ID)
- STATE#POS_STBY#_TEST (using INPUT_EVENT_ID_SOURCE, KNOB_ID, POS_STBY)
- TT_VALUE_#POS_ON#
- SET_STATE_#POS_ON# (using ENUM_VAL_ON, SET_TRANSPONDER_STATE)
- STR_STATE_#POS_ON#
- CODE_POS_#POS_ON# (using INPUT_EVENT_ID_SOURCE, KNOB_ID)
- STATE#POS_ON#_TEST (using INPUT_EVENT_ID_SOURCE, KNOB_ID, POS_ON)
- TT_VALUE_#POS_ALT#
- SET_STATE_#POS_ALT# (using ENUM_VAL_ALT, SET_TRANSPONDER_STATE)
- STR_STATE_#POS_ALT#
- CODE_POS_#POS_ALT# (using INPUT_EVENT_ID_SOURCE, KNOB_ID)
- STATE#POS_ALT#_TEST (using INPUT_EVENT_ID_SOURCE, KNOB_ID, POS_ALT)
Condition: Switch(TYPE)
-
Case: OFF_STBY_ON_ALT_TEST
Parameters set:
- ENUM_VAL_TO_POS_EXTERNAL (using ENUM_VAL_OFF, POS_OFF, ENUM_VAL_STBY, POS_STBY, ENUM_VAL_ON, POS_ON, ENUM_VAL_ALT, POS_ALT, ENUM_VAL_TEST, ENUM_VAL_GRND, POS_TEST)
-
Case: OFF_STBY_GRND_ON_ALT
Parameters set:
- ENUM_VAL_TO_POS_EXTERNAL (using ENUM_VAL_OFF, POS_OFF, ENUM_VAL_STBY, POS_STBY, ENUM_VAL_ON, POS_ON, ENUM_VAL_ALT, POS_ALT, ENUM_VAL_GRND, ENUM_VAL_TEST, POS_GRND)
Condition: Switch(TYPE)
-
Case: OFF_STBY_ON_ALT_TEST
Parameters set:
- TT_VALUE_#POS_TEST#
- SET_STATE_#POS_TEST# (using ENUM_VAL_TEST, SET_TRANSPONDER_STATE)
- STR_STATE_#POS_TEST#
- CODE_POS_#POS_TEST# (using INPUT_EVENT_ID_SOURCE, KNOB_ID)
- STATE#POS_TEST#_TEST (using INPUT_EVENT_ID_SOURCE, KNOB_ID, POS_TEST)
-
Case: OFF_STBY_GRND_ON_ALT
Parameters set:
- TT_VALUE_#POS_GRND#
- SET_STATE_#POS_GRND# (using ENUM_VAL_GRND, SET_TRANSPONDER_STATE)
- STR_STATE_#POS_GRND#
- CODE_POS_#POS_GRND# (using INPUT_EVENT_ID_SOURCE, KNOB_ID)
- STATE#POS_GRND#_TEST (using INPUT_EVENT_ID_SOURCE, KNOB_ID, POS_GRND)
-
Default
-
ASOBO_Transponder_Push_ID_Template
Definition from XML<Template Name="ASOBO_Transponder_Push_ID_Template"> <Parameters Type="Default"> <EMISSIVE_POTENTIOMETER>1</EMISSIVE_POTENTIOMETER> <BUTTON_EMISSIVE_FACTOR>1</BUTTON_EMISSIVE_FACTOR> <WWISE_EVENT_1>transponder_push_button_on</WWISE_EVENT_1> <NORMALIZED_TIME_1>0.1</NORMALIZED_TIME_1> <WWISE_EVENT_2>transponder_push_button_off</WWISE_EVENT_2> <NORMALIZED_TIME_2>0.1</NORMALIZED_TIME_2> <PART_ID>TRANSPONDER_Push_#ID#</PART_ID> <EVENT_PUSH>Transponder#ID#</EVENT_PUSH> <EVENT_TYPE>H</EVENT_TYPE> </Parameters> <UseTemplate Name="ASOBO_NAVCOM_Alternative_Base_Template"> <BTN_ID>Transponder_#ID#</BTN_ID> <SET_STATE_EXTERNAL>p0 if{ (>#EVENT_TYPE#:#EVENT_PUSH#) }</SET_STATE_EXTERNAL> <EMISSIVE_CODE>(A:CIRCUIT GENERAL PANEL ON, Bool) (A:LIGHT POTENTIOMETER:#EMISSIVE_POTENTIOMETER#, percent over 100) * #BUTTON_EMISSIVE_FACTOR# *</EMISSIVE_CODE> </UseTemplate> </Template>Parameters initialization:
-
Default
Parameters set:
- EMISSIVE_POTENTIOMETER
- BUTTON_EMISSIVE_FACTOR
- WWISE_EVENT_1
- NORMALIZED_TIME_1
- WWISE_EVENT_2
- NORMALIZED_TIME_2
- PART_ID (using ID)
- EVENT_PUSH (using ID)
- EVENT_TYPE
Templates used:
-
ASOBO_NAVCOM_Alternative_Base_Template
Parameters set:
- BTN_ID (using ID)
- SET_STATE_EXTERNAL (using EVENT_TYPE, EVENT_PUSH)
- EMISSIVE_CODE (using EMISSIVE_POTENTIOMETER, BUTTON_EMISSIVE_FACTOR)
-
Default