Asobo\Common\Safety.xml
Includes
- RelativeFile: Subtemplates\\Safety_Subtemplates.xml
- RelativeFile: Inputs\\Safety_Inputs.xml
Templates
- ASOBO_SAFETY_Push_Warning_Template
- ASOBO_SAFETY_Push_Caution_Template
- ASOBO_SAFETY_Push_Annunciator_Template
- ASOBO_SAFETY_Push_Test_Template
- ASOBO_SAFETY_Push_Gear_Advisory_Template
- ASOBO_SAFETY_Push_WarningCaution_Template
- ASOBO_SAFETY_Push_Template
- ASOBO_SAFETY_Push_Acknowledge_Template
- ASOBO_SAFETY_Light_Template
- ASOBO_SAFETY_Switch_Light_Template
- ASOBO_SAFETY_ELT_Template
- ASOBO_SAFETY_Switch_ELT_Template
- ASOBO_SAFETY_AlternateStaticAir_Template
- ASOBO_SAFETY_Push_AlternateStaticAir_Template
- ASOBO_SAFETY_Switch_AlternateStaticAir_Template
- ASOBO_SAFETY_Gauge_OxygenPressure_Template
- ASOBO_SAFETY_Indicator_Template
- ASOBO_SAFETY_Indicator_Day_Night_Check_Template
- ASOBO_SAFETY_Indicator_TailHook_Template
- ASOBO_SAFETY_Indicator_Warning_Template
- ASOBO_SAFETY_Indicator_Caution_Template
- ASOBO_SAFETY_Indicator_Caution_Master_Template
- ASOBO_SAFETY_Indicator_Warning_Master_Template
- ASOBO_SAFETY_Indicator_Battery_Template
- ASOBO_SAFETY_Spoilers_Template
- ASOBO_SAFETY_Parking_Brake_Template
- ASOBO_SAFETY_Launch_Bar_Template
- ASOBO_SAFETY_Launch_Bar_Warning_Template
- ASOBO_SAFETY_Indicator_Coolant_Template
- ASOBO_SAFETY_Indicator_OilPress_Template
- ASOBO_SAFETY_Indicator_OilTemp_Template
- ASOBO_SAFETY_Indicator_FuelPress_Template
- ASOBO_SAFETY_Indicator_Vacuum_Template
- ASOBO_SAFETY_Indicator_Waiting_Template
- ASOBO_SAFETY_Indicator_Flaps_Template
- ASOBO_SAFETY_Indicator_Charge_Template
- ASOBO_SAFETY_Indicator_LowFuel_Template
- ASOBO_SAFETY_Indicator_LowVolt_Template
- ASOBO_SAFETY_Indicator_Pitot_Template
- ASOBO_SAFETY_Indicator_Alternator_Template
- ASOBO_SAFETY_Indicator_Glow_Light_Template
- ASOBO_SAFETY_Indicator_Starter_Template
- ASOBO_SAFETY_Indicator_Engine_Template
- ASOBO_SAFETY_Indicator_ECU_Template
- ASOBO_SAFETY_Indicator_FuelTransfer_Template
- ASOBO_SAFETY_Indicator_FuelPump_Template
- ASOBO_SAFETY_Indicator_Start_Template
- ASOBO_SAFETY_Indicator_Doors_Template
- ASOBO_SAFETY_Indicator_TrimFail_Template
- ASOBO_SAFETY_Indicator_RPM_Template
- ASOBO_SAFETY_Indicator_Accelerometer_Template
- ASOBO_SAFETY_Indicator_HydraulicsPressure_Template
- ASOBO_SAFETY_Indicator_HydraulicsFailure_Template
- ASOBO_SAFETY_Indicator_NavGps_Template
- ASOBO_SAFETY_Indicator_GpsApr_Template
- ASOBO_SAFETY_Indicator_Knob_LandingGear_Template
- ASOBO_SAFETY_Indicator_Knob_Dimmer_Push_Test
- ASOBO_SAFETY_Base_Template
- ASOBO_SAFETY_Push_Event_Base_Template
- ASOBO_SAFETY_Pull_Event_Base_Template
-
ASOBO_SAFETY_Push_Warning_Template
Definition from XML<Template Name="ASOBO_SAFETY_Push_Warning_Template"> <Parameters Type="Default"> <VAR_SCOPE>O</VAR_SCOPE> <VAR_NAME>SAFETY_Push_Warning</VAR_NAME> <Switch Param="TYPE"> <Case Value="AIRLINER"> <SWITCH_POSITION_TYPE>I</SWITCH_POSITION_TYPE> <SWITCH_POSITION_VAR>SAFETY_Push_Warning_ButtonAnimVar</SWITCH_POSITION_VAR> </Case> </Switch> </Parameters> <Parameters Type="Default"> <PUSH_EVENT>(>K:MASTER_WARNING_ACKNOWLEDGE)</PUSH_EVENT> <IS_STATE_ACTIVE>(A:MASTER WARNING ACTIVE, Boolean) (A:MASTER WARNING ACKNOWLEDGED, Boolean) ! and (#VAR_SCOPE#:#VAR_NAME#) or</IS_STATE_ACTIVE> <TOOLTIP_TITLE>@TT_Package.SAFETY_PUSH_WARNING_TITLE</TOOLTIP_TITLE> <TT_DESCRIPTION_ID>@TT_Package.SAFETY_PUSH_WARNING_ACTION</TT_DESCRIPTION_ID> </Parameters> <Parameters Type="Override"> <Switch Param="TYPE"> <Case Value="AIRLINER"> <IS_STATE_ACTIVE_SEQ1>#IS_STATE_ACTIVE# (#SWITCH_POSITION_TYPE#:#SWITCH_POSITION_VAR#_IsDown) or</IS_STATE_ACTIVE_SEQ1> </Case> </Switch> </Parameters> <UseTemplate Name="ASOBO_SAFETY_Push_Template"> <PUSH_ID>Warning</PUSH_ID> </UseTemplate> </Template>Parameters initialization:
-
Default
Parameters set:
- VAR_SCOPE
- VAR_NAME
Condition: Switch(TYPE)
-
Case: AIRLINER
Parameters set:
- SWITCH_POSITION_TYPE
- SWITCH_POSITION_VAR
-
Default
Parameters set:
- PUSH_EVENT
- IS_STATE_ACTIVE (using VAR_SCOPE, VAR_NAME)
- TOOLTIP_TITLE
- TT_DESCRIPTION_ID
-
Override
Condition: Switch(TYPE)
-
Case: AIRLINER
Parameters set:
- IS_STATE_ACTIVE_SEQ1 (using IS_STATE_ACTIVE, SWITCH_POSITION_TYPE, SWITCH_POSITION_VAR)
-
Templates used:
-
ASOBO_SAFETY_Push_Template
Parameters set:
- PUSH_ID
-
Default
-
ASOBO_SAFETY_Push_Caution_Template
Definition from XML<Template Name="ASOBO_SAFETY_Push_Caution_Template"> <Parameters Type="Default"> <VAR_SCOPE>O</VAR_SCOPE> <VAR_NAME>SAFETY_Push_Caution</VAR_NAME> <Switch Param="TYPE"> <Case Value="AIRLINER"> <SWITCH_POSITION_TYPE>I</SWITCH_POSITION_TYPE> <SWITCH_POSITION_VAR>SAFETY_Push_Caution_ButtonAnimVar</SWITCH_POSITION_VAR> </Case> </Switch> </Parameters> <Parameters Type="Default"> <PUSH_EVENT>(>K:MASTER_CAUTION_ACKNOWLEDGE)</PUSH_EVENT> <IS_STATE_ACTIVE>(A:MASTER CAUTION ACTIVE, Boolean) (A:MASTER CAUTION ACKNOWLEDGED, Boolean) ! and (#VAR_SCOPE#:#VAR_NAME#) or</IS_STATE_ACTIVE> <TOOLTIP_TITLE>@TT_Package.SAFETY_PUSH_CAUTION_TITLE</TOOLTIP_TITLE> <TT_DESCRIPTION_ID>@TT_Package.SAFETY_PUSH_CAUTION_ACTION</TT_DESCRIPTION_ID> </Parameters> <Parameters Type="Override"> <Switch Param="TYPE"> <Case Value="AIRLINER"> <IS_STATE_ACTIVE_SEQ1>#IS_STATE_ACTIVE# (#SWITCH_POSITION_TYPE#:#SWITCH_POSITION_VAR#_IsDown) or</IS_STATE_ACTIVE_SEQ1> </Case> </Switch> </Parameters> <UseTemplate Name="ASOBO_SAFETY_Push_Template"> <PUSH_ID>Caution</PUSH_ID> </UseTemplate> </Template>Parameters initialization:
-
Default
Parameters set:
- VAR_SCOPE
- VAR_NAME
Condition: Switch(TYPE)
-
Case: AIRLINER
Parameters set:
- SWITCH_POSITION_TYPE
- SWITCH_POSITION_VAR
-
Default
Parameters set:
- PUSH_EVENT
- IS_STATE_ACTIVE (using VAR_SCOPE, VAR_NAME)
- TOOLTIP_TITLE
- TT_DESCRIPTION_ID
-
Override
Condition: Switch(TYPE)
-
Case: AIRLINER
Parameters set:
- IS_STATE_ACTIVE_SEQ1 (using IS_STATE_ACTIVE, SWITCH_POSITION_TYPE, SWITCH_POSITION_VAR)
-
Templates used:
-
ASOBO_SAFETY_Push_Template
Parameters set:
- PUSH_ID
-
Default
-
ASOBO_SAFETY_Push_Annunciator_Template
Definition from XML<Template Name="ASOBO_SAFETY_Push_Annunciator_Template"> <Parameters Type="Default"> <WWISE_EVENT_1>annunciator_push_button_on</WWISE_EVENT_1> <WWISE_EVENT_2>annunciator_push_button_off</WWISE_EVENT_2> <TOOLTIP_TITLE>@TT_Package.SAFETY_PUSH_ANNUCIATOR_TITLE</TOOLTIP_TITLE> <TT_DESCRIPTION_ID>@TT_Package.SAFETY_PUSH_ANNUCIATOR_ACTION</TT_DESCRIPTION_ID> </Parameters> <Parameters Type="Override"> <PUSH_EVENT>(>K:ANNUNCIATOR_SWITCH_ON)</PUSH_EVENT> <RELEASE_EVENT>(>K:ANNUNCIATOR_SWITCH_OFF)</RELEASE_EVENT> </Parameters> <UseTemplate Name="ASOBO_SAFETY_Push_Template"> <PUSH_ID>Annunciator</PUSH_ID> </UseTemplate> </Template>Parameters initialization:
-
Default
Parameters set:
- WWISE_EVENT_1
- WWISE_EVENT_2
- TOOLTIP_TITLE
- TT_DESCRIPTION_ID
-
Override
Parameters set:
- PUSH_EVENT
- RELEASE_EVENT
Templates used:
-
ASOBO_SAFETY_Push_Template
Parameters set:
- PUSH_ID
-
Default
-
ASOBO_SAFETY_Push_Test_Template
Definition from XML<Template Name="ASOBO_SAFETY_Push_Test_Template"> <Parameters Type="Default"> <VAR_SCOPE>L</VAR_SCOPE> <VAR_NAME>XMLVAR_LTS_Test</VAR_NAME> <TOOLTIP_TITLE>@TT_Package.SAFETY_PUSH_TEST_TITLE</TOOLTIP_TITLE> <TT_DESCRIPTION_ID>@TT_Package.SAFETY_PUSH_TEST_ACTION</TT_DESCRIPTION_ID> <DONT_APPEND_ID>True</DONT_APPEND_ID> </Parameters> <Parameters Type="Override"> <PUSH_EVENT>1 (>#VAR_SCOPE#:#VAR_NAME#)</PUSH_EVENT> <RELEASE_EVENT>0 (>#VAR_SCOPE#:#VAR_NAME#)</RELEASE_EVENT> </Parameters> <UseTemplate Name="ASOBO_SAFETY_Push_Template"> <PUSH_ID>Test</PUSH_ID> </UseTemplate> </Template>Parameters initialization:
-
Default
Parameters set:
- VAR_SCOPE
- VAR_NAME
- TOOLTIP_TITLE
- TT_DESCRIPTION_ID
- DONT_APPEND_ID
-
Override
Parameters set:
- PUSH_EVENT (using VAR_SCOPE, VAR_NAME)
- RELEASE_EVENT (using VAR_SCOPE, VAR_NAME)
Templates used:
-
ASOBO_SAFETY_Push_Template
Parameters set:
- PUSH_ID
-
Default
-
ASOBO_SAFETY_Push_Gear_Advisory_Template
Definition from XML<Template Name="ASOBO_SAFETY_Push_Gear_Advisory_Template"> <Parameters Type="Default"> <VAR_SCOPE>O</VAR_SCOPE> <VAR_NAME>SAFETY_Push_Gear_Advisory</VAR_NAME> <TOOLTIP_TITLE>@TT_Package.SAFETY_PUSH_GEAR_ADVISORY_TITLE</TOOLTIP_TITLE> <TT_DESCRIPTION_ID>@TT_Package.SAFETY_PUSH_GEAR_ADVISORY_ACTION</TT_DESCRIPTION_ID> </Parameters> <Parameters Type="Default"> <PUSH_EVENT>(>H:Generic_Gear_Advisory_Push)</PUSH_EVENT> <IS_STATE_ACTIVE>(L:Generic_Gear_Advisory_Active) (#VAR_SCOPE#:#VAR_NAME#) or (E:SIMULATION TIME, seconds) 2 % flr and</IS_STATE_ACTIVE> </Parameters> <UseTemplate Name="ASOBO_SAFETY_Push_Template"> <PUSH_ID>Gear_Advisory</PUSH_ID> </UseTemplate> </Template>Parameters initialization:
-
Default
Parameters set:
- VAR_SCOPE
- VAR_NAME
- TOOLTIP_TITLE
- TT_DESCRIPTION_ID
-
Default
Parameters set:
- PUSH_EVENT
- IS_STATE_ACTIVE (using VAR_SCOPE, VAR_NAME)
Templates used:
-
ASOBO_SAFETY_Push_Template
Parameters set:
- PUSH_ID
-
Default
-
ASOBO_SAFETY_Push_WarningCaution_Template
Definition from XML<Template Name="ASOBO_SAFETY_Push_WarningCaution_Template"> <Parameters Type="Default"> <TYPE>AIRLINER</TYPE> <VAR_SCOPE>O</VAR_SCOPE> <VAR_NAME>SAFETY_Push_Warning_Caution</VAR_NAME> <SWITCH_POSITION_TYPE>I</SWITCH_POSITION_TYPE> <SWITCH_POSITION_VAR>SAFETY_Push_WarningCaution_ButtonAnimVar</SWITCH_POSITION_VAR> </Parameters> <Parameters Type="Default"> <PUSH_EVENT>(>K:MASTER_WARNING_ACKNOWLEDGE) (>K:MASTER_CAUTION_ACKNOWLEDGE)</PUSH_EVENT> <IS_STATE_ACTIVE_SEQ1>(A:MASTER CAUTION ACTIVE, Boolean) (A:MASTER CAUTION ACKNOWLEDGED, Boolean) ! and (#VAR_SCOPE#:#VAR_NAME#) or</IS_STATE_ACTIVE_SEQ1> <IS_STATE_ACTIVE_SEQ2>(A:MASTER WARNING ACTIVE, Boolean) (A:MASTER WARNING ACKNOWLEDGED, Boolean) ! and (#VAR_SCOPE#:#VAR_NAME#) or</IS_STATE_ACTIVE_SEQ2> <TOOLTIP_TITLE>@TT_Package.SAFETY_PUSH_MASTER_TITLE</TOOLTIP_TITLE> <TT_DESCRIPTION_ID>@TT_Package.SAFETY_PUSH_MASTER_ACTION</TT_DESCRIPTION_ID> </Parameters> <Parameters Type="Override"> <Condition Valid="NO_EMISSIVE_ON_HELD"> <False> <IS_STATE_ACTIVE_SEQ1>#IS_STATE_ACTIVE_SEQ1# (#SWITCH_POSITION_TYPE#:#SWITCH_POSITION_VAR#_IsDown) or</IS_STATE_ACTIVE_SEQ1> <IS_STATE_ACTIVE_SEQ2>#IS_STATE_ACTIVE_SEQ2# (#SWITCH_POSITION_TYPE#:#SWITCH_POSITION_VAR#_IsDown) or</IS_STATE_ACTIVE_SEQ2> </False> </Condition> </Parameters> <UseTemplate Name="ASOBO_SAFETY_Push_Template"> <PUSH_ID>Warning_Caution</PUSH_ID> </UseTemplate> </Template>Parameters initialization:
-
Default
Parameters set:
- TYPE
- VAR_SCOPE
- VAR_NAME
- SWITCH_POSITION_TYPE
- SWITCH_POSITION_VAR
-
Default
Parameters set:
- PUSH_EVENT
- IS_STATE_ACTIVE_SEQ1 (using VAR_SCOPE, VAR_NAME)
- IS_STATE_ACTIVE_SEQ2 (using VAR_SCOPE, VAR_NAME)
- TOOLTIP_TITLE
- TT_DESCRIPTION_ID
-
Override
Condition: Valid(NO_EMISSIVE_ON_HELD)
-
Case: False
Parameters set:
- IS_STATE_ACTIVE_SEQ1 (using IS_STATE_ACTIVE_SEQ1, SWITCH_POSITION_TYPE, SWITCH_POSITION_VAR)
- IS_STATE_ACTIVE_SEQ2 (using IS_STATE_ACTIVE_SEQ2, SWITCH_POSITION_TYPE, SWITCH_POSITION_VAR)
-
Templates used:
-
ASOBO_SAFETY_Push_Template
Parameters set:
- PUSH_ID
-
Default
-
ASOBO_SAFETY_Push_Template
Definition from XML<Template Name="ASOBO_SAFETY_Push_Template"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <UseTemplate Name="ASOBO_GT_Helper_Suffix_ID_Appender"> <TEMPLATE_TO_CALL>ASOBO_SAFETY_Push_SubTemplate</TEMPLATE_TO_CALL> </UseTemplate> </Template>Parameters initialization:
-
Default
Parameters set:
- ID
Templates used:
-
ASOBO_GT_Helper_Suffix_ID_Appender
- May include a subtemplate using the parameter 'TEMPLATE_TO_CALL' and resolve to the following template(s):
Parameters set:
- TEMPLATE_TO_CALL
-
Default
-
ASOBO_SAFETY_Push_Acknowledge_Template
Definition from XML<Template Name="ASOBO_SAFETY_Push_Acknowledge_Template"> <UseTemplate Name="ASOBO_SAFETY_Push_Acknowledge_SubTemplate"/> </Template>Templates used:
-
ASOBO_SAFETY_Light_Template
Definition from XML<Template Name="ASOBO_SAFETY_Light_Template"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <UseTemplate Name="ASOBO_GT_Helper_Suffix_ID_Appender"> <TEMPLATE_TO_CALL>ASOBO_SAFETY_Light_SubTemplate</TEMPLATE_TO_CALL> </UseTemplate> </Template>Parameters initialization:
-
Default
Parameters set:
- ID
Templates used:
-
ASOBO_GT_Helper_Suffix_ID_Appender
- May include a subtemplate using the parameter 'TEMPLATE_TO_CALL' and resolve to the following template(s):
Parameters set:
- TEMPLATE_TO_CALL
-
Default
-
ASOBO_SAFETY_Switch_Light_Template
Definition from XML<Template Name="ASOBO_SAFETY_Switch_Light_Template"> <UseTemplate Name="ASOBO_SAFETY_Light_Template"> <INTERACTION_TYPE>Switch</INTERACTION_TYPE> </UseTemplate> </Template>Templates used:
-
ASOBO_SAFETY_Light_Template
Parameters set:
- INTERACTION_TYPE
-
ASOBO_SAFETY_Light_Template
-
ASOBO_SAFETY_ELT_Template
Definition from XML<Template Name="ASOBO_SAFETY_ELT_Template"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <UseTemplate Name="ASOBO_GT_Helper_Suffix_ID_Appender"> <TEMPLATE_TO_CALL>ASOBO_SAFETY_ELT_SubTemplate</TEMPLATE_TO_CALL> </UseTemplate> </Template>Parameters initialization:
-
Default
Parameters set:
- ID
Templates used:
-
ASOBO_GT_Helper_Suffix_ID_Appender
- May include a subtemplate using the parameter 'TEMPLATE_TO_CALL' and resolve to the following template(s):
Parameters set:
- TEMPLATE_TO_CALL
-
Default
-
ASOBO_SAFETY_Switch_ELT_Template
Definition from XML<Template Name="ASOBO_SAFETY_Switch_ELT_Template"> <UseTemplate Name="ASOBO_SAFETY_ELT_Template"> <INTERACTION_TYPE>Switch</INTERACTION_TYPE> </UseTemplate> </Template>Templates used:
-
ASOBO_SAFETY_ELT_Template
Parameters set:
- INTERACTION_TYPE
-
ASOBO_SAFETY_ELT_Template
-
ASOBO_SAFETY_AlternateStaticAir_Template
Definition from XML<Template Name="ASOBO_SAFETY_AlternateStaticAir_Template"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <UseTemplate Name="ASOBO_GT_Helper_Suffix_ID_Appender"> <TEMPLATE_TO_CALL>ASOBO_SAFETY_AlternateStaticAir_SubTemplate</TEMPLATE_TO_CALL> </UseTemplate> </Template>Parameters initialization:
-
Default
Parameters set:
- ID
Templates used:
-
ASOBO_GT_Helper_Suffix_ID_Appender
- May include a subtemplate using the parameter 'TEMPLATE_TO_CALL' and resolve to the following template(s):
Parameters set:
- TEMPLATE_TO_CALL
-
Default
-
ASOBO_SAFETY_Push_AlternateStaticAir_Template
Definition from XML<Template Name="ASOBO_SAFETY_Push_AlternateStaticAir_Template"> <UseTemplate Name="ASOBO_SAFETY_AlternateStaticAir_Template"> <INTERACTION_TYPE>Push</INTERACTION_TYPE> </UseTemplate> </Template>Templates used:
-
ASOBO_SAFETY_AlternateStaticAir_Template
Parameters set:
- INTERACTION_TYPE
-
ASOBO_SAFETY_AlternateStaticAir_Template
-
ASOBO_SAFETY_Switch_AlternateStaticAir_Template
Definition from XML<Template Name="ASOBO_SAFETY_Switch_AlternateStaticAir_Template"> <UseTemplate Name="ASOBO_SAFETY_AlternateStaticAir_Template"> <INTERACTION_TYPE>Switch</INTERACTION_TYPE> </UseTemplate> </Template>Templates used:
-
ASOBO_SAFETY_AlternateStaticAir_Template
Parameters set:
- INTERACTION_TYPE
-
ASOBO_SAFETY_AlternateStaticAir_Template
-
ASOBO_SAFETY_Gauge_OxygenPressure_Template
Definition from XML<Template Name="ASOBO_SAFETY_Gauge_OxygenPressure_Template"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <UseTemplate Name="ASOBO_GT_Helper_Suffix_ID_Appender"> <TEMPLATE_TO_CALL>ASOBO_SAFETY_Gauge_OxygenPressure_SubTemplate</TEMPLATE_TO_CALL> </UseTemplate> </Template>Parameters initialization:
-
Default
Parameters set:
- ID
Templates used:
-
ASOBO_GT_Helper_Suffix_ID_Appender
- May include a subtemplate using the parameter 'TEMPLATE_TO_CALL' and resolve to the following template(s):
Parameters set:
- TEMPLATE_TO_CALL
-
Default
-
ASOBO_SAFETY_Indicator_Template
Definition from XML<Template Name="ASOBO_SAFETY_Indicator_Template"> <Parameters Type="Default"> <REQUIRE_ACK_CODE/> <CANCEL_ACK_CODE/> </Parameters> <UseTemplate Name="ASOBO_SAFETY_Indicator_Day_Night_Check_Template"> <Condition Check="OVERRIDE_EMISSIVE_CODE"> <EMISSIVE_CODE>#OVERRIDE_EMISSIVE_CODE#</EMISSIVE_CODE> </Condition> </UseTemplate> </Template>Parameters initialization:
-
Default
Parameters set:
- REQUIRE_ACK_CODE
- CANCEL_ACK_CODE
Templates used:
-
ASOBO_SAFETY_Indicator_Day_Night_Check_Template
Condition: Check(OVERRIDE_EMISSIVE_CODE)
-
Case: True
Parameters set:
- EMISSIVE_CODE (using OVERRIDE_EMISSIVE_CODE)
-
-
Default
-
ASOBO_SAFETY_Indicator_Day_Night_Check_Template
Definition from XML<Template Name="ASOBO_SAFETY_Indicator_Day_Night_Check_Template"> <Parameters Type="Default"> <EMISSIVE_CODE>0</EMISSIVE_CODE> <DAYNIGHT_FACTOR>0.7</DAYNIGHT_FACTOR> </Parameters> <UseTemplate Name="ASOBO_SAFETY_Indicator_SubTemplate"> <Condition Check="CHECK_DAYNIGHT_SWITCH"> <EMISSIVE_CODE> (L:XMLVAR_WarningsAttenuated) if{ #DAYNIGHT_FACTOR# sp1 } els{ 1 sp1 } #EMISSIVE_CODE# l1 * </EMISSIVE_CODE> </Condition> </UseTemplate> </Template>Parameters initialization:
-
Default
Parameters set:
- EMISSIVE_CODE
- DAYNIGHT_FACTOR
Templates used:
-
ASOBO_SAFETY_Indicator_SubTemplate
Condition: Check(CHECK_DAYNIGHT_SWITCH)
-
Case: True
Parameters set:
- EMISSIVE_CODE (using DAYNIGHT_FACTOR, EMISSIVE_CODE)
-
-
Default
-
ASOBO_SAFETY_Indicator_TailHook_Template
Definition from XML<Template Name="ASOBO_SAFETY_Indicator_TailHook_Template"> <UseTemplate Name="ASOBO_SAFETY_Indicator_SubTemplate"> <EMISSIVE_CODE> (A:TAILHOOK POSITION, Percent over 100) (A:TAILHOOK HANDLE, Percent over 100) != </EMISSIVE_CODE> </UseTemplate> </Template>Templates used:
-
ASOBO_SAFETY_Indicator_SubTemplate
Parameters set:
- EMISSIVE_CODE
-
ASOBO_SAFETY_Indicator_SubTemplate
-
ASOBO_SAFETY_Indicator_Warning_Template
Definition from XML<Template Name="ASOBO_SAFETY_Indicator_Warning_Template"> <Parameters Type="Default"> <REQUIRE_ACK_CODE> (I:XMLVAR_WarningWaitingAck) ++ (>I:XMLVAR_WarningWaitingAck) (I:XMLVAR_WarningWaitingAck) 0 > (>L:XMLVAR_WarningEnabled) </REQUIRE_ACK_CODE> <CANCEL_ACK_CODE> (I:XMLVAR_WarningWaitingAck) -- (>I:XMLVAR_WarningWaitingAck) (I:XMLVAR_WarningWaitingAck) 0 > (>L:XMLVAR_WarningEnabled) </CANCEL_ACK_CODE> </Parameters> <UseTemplate Name="ASOBO_SAFETY_Indicator_Template"/> </Template>Parameters initialization:
-
Default
Parameters set:
- REQUIRE_ACK_CODE
- CANCEL_ACK_CODE
Templates used:
-
Default
-
ASOBO_SAFETY_Indicator_Caution_Template
Definition from XML<Template Name="ASOBO_SAFETY_Indicator_Caution_Template"> <Parameters Type="Default"> <REQUIRE_ACK_CODE> (I:XMLVAR_CautionWaitingAck) ++ (>I:XMLVAR_CautionWaitingAck) (I:XMLVAR_CautionWaitingAck) 0 > (>L:XMLVAR_CautionEnabled) </REQUIRE_ACK_CODE> <CANCEL_ACK_CODE> (I:XMLVAR_CautionWaitingAck) -- (>I:XMLVAR_CautionWaitingAck) (I:XMLVAR_CautionWaitingAck) 0 > (>L:XMLVAR_CautionEnabled) </CANCEL_ACK_CODE> </Parameters> <UseTemplate Name="ASOBO_SAFETY_Indicator_Template"/> </Template>Parameters initialization:
-
Default
Parameters set:
- REQUIRE_ACK_CODE
- CANCEL_ACK_CODE
Templates used:
-
Default
-
ASOBO_SAFETY_Indicator_Caution_Master_Template
Definition from XML<Template Name="ASOBO_SAFETY_Indicator_Caution_Master_Template"> <Parameters Type="Default"> <NODE_ID>SAFETY_Indicator_Caution</NODE_ID> </Parameters> <UseTemplate Name="ASOBO_SAFETY_Indicator_Template"> <EMISSIVE_CODE> (L:XMLVAR_CautionEnabled) </EMISSIVE_CODE> </UseTemplate> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID
Templates used:
-
ASOBO_SAFETY_Indicator_Template
Parameters set:
- EMISSIVE_CODE
-
Default
-
ASOBO_SAFETY_Indicator_Warning_Master_Template
Definition from XML<Template Name="ASOBO_SAFETY_Indicator_Warning_Master_Template"> <Parameters Type="Default"> <NODE_ID>SAFETY_Indicator_Warning</NODE_ID> </Parameters> <UseTemplate Name="ASOBO_SAFETY_Indicator_Template"> <EMISSIVE_CODE> (L:XMLVAR_WarningEnabled) </EMISSIVE_CODE> </UseTemplate> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID
Templates used:
-
ASOBO_SAFETY_Indicator_Template
Parameters set:
- EMISSIVE_CODE
-
Default
-
ASOBO_SAFETY_Indicator_Battery_Template
Definition from XML<Template Name="ASOBO_SAFETY_Indicator_Battery_Template"> <Parameters Type="Default"> <NODE_ID>SAFETY_Indicator_Battery</NODE_ID> <THRESHOLD_VOLTAGE>23</THRESHOLD_VOLTAGE> <THRESHOLD_LOAD>5</THRESHOLD_LOAD> <MIN_RPM>500</MIN_RPM> <ID>1</ID> </Parameters> <Parameters Type="Override"> <Condition Valid="ONLY_CHECK_DISCHARGE"> <True> <EMISSIVE_CODE> (A:ELECTRICAL BATTERY LOAD:#ID#, amp) #THRESHOLD_LOAD# > </EMISSIVE_CODE> </True> <False> <EMISSIVE_CODE> (A:ELECTRICAL BATTERY VOLTAGE:#ID#, volt) #THRESHOLD_VOLTAGE# < (A:ELECTRICAL BATTERY LOAD:#ID#, amp) #THRESHOLD_LOAD# > (A:GENERAL ENG RPM:#ID#, rpm) #MIN_RPM# > and or </EMISSIVE_CODE> </False> </Condition> </Parameters> <UseTemplate Name="ASOBO_SAFETY_Indicator_Caution_Template"/> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID
- THRESHOLD_VOLTAGE
- THRESHOLD_LOAD
- MIN_RPM
- ID
-
Override
Condition: Valid(ONLY_CHECK_DISCHARGE)
-
Case: True
Parameters set:
- EMISSIVE_CODE (using ID, THRESHOLD_LOAD)
-
Case: False
Parameters set:
- EMISSIVE_CODE (using ID, THRESHOLD_VOLTAGE, THRESHOLD_LOAD, MIN_RPM)
-
Templates used:
-
Default
-
ASOBO_SAFETY_Spoilers_Template
Definition from XML<Template Name="ASOBO_SAFETY_Spoilers_Template"> <Parameters Type="Default"> <NODE_ID>SAFETY_Indicator_Spoilers</NODE_ID> </Parameters> <UseTemplate Name="ASOBO_SAFETY_Indicator_Template"> <EMISSIVE_CODE>(A:SPOILERS LEFT POSITION, Percent over 100) 0 > (A:SPOILERS RIGHT POSITION, Percent over 100) 0 > or (A:SPOILERS HANDLE POSITION, Percent) 0 > and</EMISSIVE_CODE> </UseTemplate> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID
Templates used:
-
ASOBO_SAFETY_Indicator_Template
Parameters set:
- EMISSIVE_CODE
-
Default
-
ASOBO_SAFETY_Parking_Brake_Template
Definition from XML<Template Name="ASOBO_SAFETY_Parking_Brake_Template"> <Parameters Type="Default"> <NODE_ID>SAFETY_Indicator_Parking_Brake</NODE_ID> </Parameters> <UseTemplate Name="ASOBO_SAFETY_Indicator_Template"> <EMISSIVE_CODE>(A:BRAKE PARKING POSITION, Bool)</EMISSIVE_CODE> </UseTemplate> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID
Templates used:
-
ASOBO_SAFETY_Indicator_Template
Parameters set:
- EMISSIVE_CODE
-
Default
-
ASOBO_SAFETY_Launch_Bar_Template
Definition from XML<Template Name="ASOBO_SAFETY_Launch_Bar_Template"> <Parameters Type="Default"> <NODE_ID>SAFETY_Indicator_Launch_Bar</NODE_ID> </Parameters> <UseTemplate Name="ASOBO_SAFETY_Indicator_Template"> <EMISSIVE_CODE>(A:LAUNCHBAR POSITION, Percent over 100) 0 ></EMISSIVE_CODE> </UseTemplate> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID
Templates used:
-
ASOBO_SAFETY_Indicator_Template
Parameters set:
- EMISSIVE_CODE
-
Default
-
ASOBO_SAFETY_Launch_Bar_Warning_Template
Definition from XML<Template Name="ASOBO_SAFETY_Launch_Bar_Warning_Template"> <Parameters Type="Default"> <NODE_ID>SAFETY_Indicator_Launch_Bar_Warning</NODE_ID> </Parameters> <UseTemplate Name="ASOBO_SAFETY_Indicator_Caution_Template"> <EMISSIVE_CODE> (A:LAUNCHBAR POSITION, Percent over 100) 0 > sp1 (A:LAUNCHBAR SWITCH, Bool) sp2 (A:SIM ON GROUND, Bool) sp3 (A:GEAR LEFT POSITION, Percent over 100) 0 == sp4 l1 l3 ! and l1 l4 and or l2 l3 ! and or l2 l4 and or </EMISSIVE_CODE> </UseTemplate> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID
Templates used:
-
ASOBO_SAFETY_Indicator_Caution_Template
Parameters set:
- EMISSIVE_CODE
-
Default
-
ASOBO_SAFETY_Indicator_Coolant_Template
Definition from XML<Template Name="ASOBO_SAFETY_Indicator_Coolant_Template"> <Parameters Type="Default"> <NODE_ID>SAFETY_Indicator_Coolant</NODE_ID> <THRESHOLD>50</THRESHOLD> <SIMVAR_UNITS>Percent</SIMVAR_UNITS> </Parameters> <UseTemplate Name="ASOBO_SAFETY_Indicator_Caution_Template"> <EMISSIVE_CODE>(A:RECIP ENG COOLANT RESERVOIR PERCENT:1, #SIMVAR_UNITS#) #THRESHOLD# <</EMISSIVE_CODE> </UseTemplate> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID
- THRESHOLD
- SIMVAR_UNITS
Templates used:
-
ASOBO_SAFETY_Indicator_Caution_Template
Parameters set:
- EMISSIVE_CODE (using SIMVAR_UNITS, THRESHOLD)
-
Default
-
ASOBO_SAFETY_Indicator_OilPress_Template
Definition from XML<Template Name="ASOBO_SAFETY_Indicator_OilPress_Template"> <Parameters Type="Default"> <NODE_ID>SAFETY_Indicator_OilPress</NODE_ID> <THRESHOLD>50</THRESHOLD> <SIMVAR_UNITS>Psi</SIMVAR_UNITS> </Parameters> <UseTemplate Name="ASOBO_SAFETY_Indicator_Caution_Template"> <EMISSIVE_CODE>(A:GENERAL ENG OIL PRESSURE:1, #SIMVAR_UNITS#) #THRESHOLD# <</EMISSIVE_CODE> </UseTemplate> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID
- THRESHOLD
- SIMVAR_UNITS
Templates used:
-
ASOBO_SAFETY_Indicator_Caution_Template
Parameters set:
- EMISSIVE_CODE (using SIMVAR_UNITS, THRESHOLD)
-
Default
-
ASOBO_SAFETY_Indicator_OilTemp_Template
Definition from XML<Template Name="ASOBO_SAFETY_Indicator_OilTemp_Template"> <Parameters Type="Default"> <NODE_ID>SAFETY_Indicator_OilTemp</NODE_ID> <THRESHOLD>110</THRESHOLD> <MIN_THRESHOLD>20</MIN_THRESHOLD> <ID>1</ID> <SIMVAR_UNITS>Celsius</SIMVAR_UNITS> </Parameters> <UseTemplate Name="ASOBO_SAFETY_Indicator_Caution_Template"> <EMISSIVE_CODE>(A:GENERAL ENG OIL TEMPERATURE:#ID#, #SIMVAR_UNITS#) s0 #THRESHOLD# > l0 #MIN_THRESHOLD# < or</EMISSIVE_CODE> </UseTemplate> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID
- THRESHOLD
- MIN_THRESHOLD
- ID
- SIMVAR_UNITS
Templates used:
-
ASOBO_SAFETY_Indicator_Caution_Template
Parameters set:
- EMISSIVE_CODE (using ID, SIMVAR_UNITS, THRESHOLD, MIN_THRESHOLD)
-
Default
-
ASOBO_SAFETY_Indicator_FuelPress_Template
Definition from XML<Template Name="ASOBO_SAFETY_Indicator_FuelPress_Template"> <Parameters Type="Default"> <NODE_ID>SAFETY_Indicator_FuelPress</NODE_ID> <THRESHOLD>2</THRESHOLD> <SIMVAR_UNITS>Psi</SIMVAR_UNITS> <SIMVAR>GENERAL ENG FUEL PRESSURE:1</SIMVAR> </Parameters> <UseTemplate Name="ASOBO_SAFETY_Indicator_Caution_Template"> <EMISSIVE_CODE>(A:#SIMVAR#, #SIMVAR_UNITS#) #THRESHOLD# <</EMISSIVE_CODE> </UseTemplate> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID
- THRESHOLD
- SIMVAR_UNITS
- SIMVAR
Templates used:
-
ASOBO_SAFETY_Indicator_Caution_Template
Parameters set:
- EMISSIVE_CODE (using SIMVAR, SIMVAR_UNITS, THRESHOLD)
-
Default
-
ASOBO_SAFETY_Indicator_Vacuum_Template
Definition from XML<Template Name="ASOBO_SAFETY_Indicator_Vacuum_Template"> <Parameters Type="Default"> <NODE_ID>SAFETY_Indicator_Vacuum</NODE_ID> <THRESHOLD>3</THRESHOLD> <SIMVAR_UNITS>inHG</SIMVAR_UNITS> </Parameters> <UseTemplate Name="ASOBO_SAFETY_Indicator_Caution_Template"> <EMISSIVE_CODE>(A:SUCTION PRESSURE, #SIMVAR_UNITS#) #THRESHOLD# <</EMISSIVE_CODE> </UseTemplate> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID
- THRESHOLD
- SIMVAR_UNITS
Templates used:
-
ASOBO_SAFETY_Indicator_Caution_Template
Parameters set:
- EMISSIVE_CODE (using SIMVAR_UNITS, THRESHOLD)
-
Default
-
ASOBO_SAFETY_Indicator_Waiting_Template
Definition from XML<Template Name="ASOBO_SAFETY_Indicator_Waiting_Template"> <Parameters Type="Default"> <NODE_ID>SAFETY_Indicator_Waiting</NODE_ID> </Parameters> <UseTemplate Name="ASOBO_SAFETY_Indicator_Caution_Template"/> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID
Templates used:
-
Default
-
ASOBO_SAFETY_Indicator_Flaps_Template
Definition from XML<Template Name="ASOBO_SAFETY_Indicator_Flaps_Template"> <Parameters Type="Default"> <NODE_ID>SAFETY_Indicator_Flaps</NODE_ID> </Parameters> <UseTemplate Name="ASOBO_SAFETY_Indicator_Caution_Template"> <EMISSIVE_CODE>(A:TRAILING EDGE FLAPS LEFT PERCENT, Percent) 0 ></EMISSIVE_CODE> </UseTemplate> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID
Templates used:
-
ASOBO_SAFETY_Indicator_Caution_Template
Parameters set:
- EMISSIVE_CODE
-
Default
-
ASOBO_SAFETY_Indicator_Charge_Template
Definition from XML<Template Name="ASOBO_SAFETY_Indicator_Charge_Template"> <Parameters Type="Default"> <NODE_ID>SAFETY_Indicator_Charge</NODE_ID> </Parameters> <UseTemplate Name="ASOBO_SAFETY_Indicator_Caution_Template"> <EMISSIVE_CODE>(A:GENERAL ENG GENERATOR ACTIVE:1, Bool) not</EMISSIVE_CODE> </UseTemplate> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID
Templates used:
-
ASOBO_SAFETY_Indicator_Caution_Template
Parameters set:
- EMISSIVE_CODE
-
Default
-
ASOBO_SAFETY_Indicator_LowFuel_Template
Definition from XML<Template Name="ASOBO_SAFETY_Indicator_LowFuel_Template"> <Parameters Type="Default"> <NODE_ID>SAFETY_Indicator_LowFuel</NODE_ID> <Condition Valid="USE_DANGEROUS_CRITICAL_THRESHOLDS"> <True> <THRESHOLD_DANGEROUS>12</THRESHOLD_DANGEROUS> <THRESHOLD_CRITICAL>8</THRESHOLD_CRITICAL> <EMISSIVE_CODE_CRITICAL>1</EMISSIVE_CODE_CRITICAL> <EMISSIVE_CODE_DANGEROUS>1</EMISSIVE_CODE_DANGEROUS> </True> <False> <THRESHOLD>8</THRESHOLD> </False> </Condition> <SIMVAR_FUEL>FUEL TANK CENTER QUANTITY</SIMVAR_FUEL> <SIMVAR_UNIT>Gallons</SIMVAR_UNIT> </Parameters> <UseTemplate Name="ASOBO_SAFETY_Indicator_Caution_Template"> <Condition Valid="USE_DANGEROUS_CRITICAL_THRESHOLDS"> <True> <Condition Check="SIMVAR_FUEL2"> <True> <EMISSIVE_CODE> (A:#SIMVAR_FUEL#, #SIMVAR_UNIT#) #THRESHOLD_DANGEROUS# < (A:#SIMVAR_FUEL2#, #SIMVAR_UNIT#) #THRESHOLD_DANGEROUS# < or s0 if{ (A:#SIMVAR_FUEL#, #SIMVAR_UNIT#) #THRESHOLD_CRITICAL# < (A:#SIMVAR_FUEL2#, #SIMVAR_UNIT#) #THRESHOLD_CRITICAL# < or if{ #EMISSIVE_CODE_CRITICAL# sp0 } els{ #EMISSIVE_CODE_DANGEROUS# sp0 } } l0 </EMISSIVE_CODE> </True> <False> <EMISSIVE_CODE> (A:#SIMVAR_FUEL#, #SIMVAR_UNIT#) #THRESHOLD_DANGEROUS# < s0 if{ (A:#SIMVAR_FUEL#, #SIMVAR_UNIT#) #THRESHOLD_CRITICAL# < if{ #EMISSIVE_CODE_CRITICAL# sp0 } els{ #EMISSIVE_CODE_DANGEROUS# sp0 } } l0 </EMISSIVE_CODE> </False> </Condition> </True> <False> <Condition Check="SIMVAR_FUEL2"> <True> <EMISSIVE_CODE>(A:#SIMVAR_FUEL#, #SIMVAR_UNIT#) #THRESHOLD# < (A:#SIMVAR_FUEL2#, #SIMVAR_UNIT#) #THRESHOLD# < or</EMISSIVE_CODE> </True> <False> <EMISSIVE_CODE>(A:#SIMVAR_FUEL#, #SIMVAR_UNIT#) #THRESHOLD# <</EMISSIVE_CODE> </False> </Condition> </False> </Condition> </UseTemplate> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID
- SIMVAR_FUEL
- SIMVAR_UNIT
Condition: Valid(USE_DANGEROUS_CRITICAL_THRESHOLDS)
-
Case: True
Parameters set:
- THRESHOLD_DANGEROUS
- THRESHOLD_CRITICAL
- EMISSIVE_CODE_CRITICAL
- EMISSIVE_CODE_DANGEROUS
-
Case: False
Parameters set:
- THRESHOLD
Templates used:
-
ASOBO_SAFETY_Indicator_Caution_Template
Condition: Valid(USE_DANGEROUS_CRITICAL_THRESHOLDS)
-
Case: True
Condition: Check(SIMVAR_FUEL2)
-
Case: True
Parameters set:
- EMISSIVE_CODE (using SIMVAR_FUEL, SIMVAR_UNIT, THRESHOLD_DANGEROUS, SIMVAR_FUEL2, THRESHOLD_CRITICAL, EMISSIVE_CODE_CRITICAL, EMISSIVE_CODE_DANGEROUS)
-
Case: False
Parameters set:
- EMISSIVE_CODE (using SIMVAR_FUEL, SIMVAR_UNIT, THRESHOLD_DANGEROUS, THRESHOLD_CRITICAL, EMISSIVE_CODE_CRITICAL, EMISSIVE_CODE_DANGEROUS)
-
-
Case: False
Condition: Check(SIMVAR_FUEL2)
-
Case: True
Parameters set:
- EMISSIVE_CODE (using SIMVAR_FUEL, SIMVAR_UNIT, THRESHOLD, SIMVAR_FUEL2)
-
Case: False
Parameters set:
- EMISSIVE_CODE (using SIMVAR_FUEL, SIMVAR_UNIT, THRESHOLD)
-
-
-
Default
-
ASOBO_SAFETY_Indicator_LowVolt_Template
Definition from XML<Template Name="ASOBO_SAFETY_Indicator_LowVolt_Template"> <Parameters Type="Default"> <NODE_ID>SAFETY_Indicator_LowVolt</NODE_ID> <THRESHOLD>12.8</THRESHOLD> <BUS_ID>1</BUS_ID> </Parameters> <UseTemplate Name="ASOBO_SAFETY_Indicator_Caution_Template"> <Condition Check="THRESHOLD_UP"> <True> <EMISSIVE_CODE> (A:ELECTRICAL MAIN BUS VOLTAGE:#BUS_ID#, Volts) #THRESHOLD_DOWN# < if{ (O:LightOn) ! if{ 1 (>O:LightOn) } 1 } els{ (O:LightOn) (A:ELECTRICAL MAIN BUS VOLTAGE:#BUS_ID#, Volts) #THRESHOLD_UP# > and if{ 0 (>O:LightOn) } (O:LightOn) } </EMISSIVE_CODE> </True> <False> <EMISSIVE_CODE> (A:ELECTRICAL MAIN BUS VOLTAGE:#BUS_ID#, Volts) #THRESHOLD# < </EMISSIVE_CODE> </False> </Condition> </UseTemplate> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID
- THRESHOLD
- BUS_ID
Templates used:
-
ASOBO_SAFETY_Indicator_Caution_Template
Condition: Check(THRESHOLD_UP)
-
Case: True
Parameters set:
- EMISSIVE_CODE (using BUS_ID, THRESHOLD_DOWN, THRESHOLD_UP)
-
Case: False
Parameters set:
- EMISSIVE_CODE (using BUS_ID, THRESHOLD)
-
-
Default
-
ASOBO_SAFETY_Indicator_Pitot_Template
Definition from XML<Template Name="ASOBO_SAFETY_Indicator_Pitot_Template"> <Parameters Type="Default"> <NODE_ID>SAFETY_Indicator_Pitot</NODE_ID> <Condition Check="ON_WHEN_PITOT_IS_ACTIVE"> <False> <INVERT_CONDITION>!</INVERT_CONDITION> </False> <True> <INVERT_CONDITION/> </True> </Condition> <ID>1</ID> </Parameters> <UseTemplate Name="ASOBO_SAFETY_Indicator_Caution_Template"> <EMISSIVE_CODE>(A:PITOT HEAT, Bool) (A:CIRCUIT PITOT HEAT ON:#ID#, Bool) and #INVERT_CONDITION#</EMISSIVE_CODE> </UseTemplate> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID
- ID
Condition: Check(ON_WHEN_PITOT_IS_ACTIVE)
-
Case: False
Parameters set:
- INVERT_CONDITION
-
Case: True
Parameters set:
- INVERT_CONDITION
Templates used:
-
ASOBO_SAFETY_Indicator_Caution_Template
Parameters set:
- EMISSIVE_CODE (using ID, INVERT_CONDITION)
-
Default
-
ASOBO_SAFETY_Indicator_Alternator_Template
Definition from XML<Template Name="ASOBO_SAFETY_Indicator_Alternator_Template"> <Parameters Type="Default"> <NODE_ID>SAFETY_Indicator_Alternator</NODE_ID> <THREAT>Caution</THREAT> <ID>1</ID> </Parameters> <UseTemplate Name="ASOBO_SAFETY_Indicator_#THREAT#_Template"> <EMISSIVE_CODE>(A:ELECTRICAL GENALT BUS VOLTAGE:#ID#, volts) 0 ==</EMISSIVE_CODE> </UseTemplate> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID
- THREAT
- ID
Parameters read:
- THREAT
Templates used:
-
ASOBO_SAFETY_Indicator_#THREAT#_Template
- May resolve to the following template(s):
Parameters set:
- EMISSIVE_CODE (using ID)
-
Default
-
ASOBO_SAFETY_Indicator_Glow_Light_Template
Definition from XML<Template Name="ASOBO_SAFETY_Indicator_Glow_Light_Template"> <Parameters Type="Default"> <NODE_ID>SAFETY_Indicator_Glow_Light</NODE_ID> <ID>1</ID> </Parameters> <UseTemplate Name="ASOBO_SAFETY_Indicator_Template"> <EMISSIVE_CODE> (A:RECIP ENG GLOW PLUG ACTIVE:#ID#,Bool) </EMISSIVE_CODE> </UseTemplate> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID
- ID
Templates used:
-
ASOBO_SAFETY_Indicator_Template
Parameters set:
- EMISSIVE_CODE (using ID)
-
Default
-
ASOBO_SAFETY_Indicator_Starter_Template
Definition from XML<Template Name="ASOBO_SAFETY_Indicator_Starter_Template"> <Parameters Type="Default"> <NODE_ID>SAFETY_Indicator_Starter</NODE_ID> </Parameters> <UseTemplate Name="ASOBO_SAFETY_Indicator_Template"> <EMISSIVE_CODE>(A:GENERAL ENG STARTER ACTIVE:1, Bool)</EMISSIVE_CODE> </UseTemplate> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID
Templates used:
-
ASOBO_SAFETY_Indicator_Template
Parameters set:
- EMISSIVE_CODE
-
Default
-
ASOBO_SAFETY_Indicator_Engine_Template
Definition from XML<Template Name="ASOBO_SAFETY_Indicator_Engine_Template"> <Parameters Type="Default"> <NODE_ID>SAFETY_Indicator_Engine</NODE_ID> </Parameters> <UseTemplate Name="ASOBO_SAFETY_Indicator_Caution_Template"/> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID
Templates used:
-
Default
-
ASOBO_SAFETY_Indicator_ECU_Template
Definition from XML<Template Name="ASOBO_SAFETY_Indicator_ECU_Template"> <Parameters Type="Default"> <NODE_ID>SAFETY_Indicator_ECU</NODE_ID> </Parameters> <UseTemplate Name="ASOBO_SAFETY_Indicator_Caution_Template"/> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID
Templates used:
-
Default
-
ASOBO_SAFETY_Indicator_FuelTransfer_Template
Definition from XML<Template Name="ASOBO_SAFETY_Indicator_FuelTransfer_Template"> <Parameters Type="Default"> <NODE_ID>SAFETY_Indicator_FuelTransfer</NODE_ID> <ID>1</ID> </Parameters> <UseTemplate Name="ASOBO_SAFETY_Indicator_Template"> <Condition Check="USE_CUSTOM_MODE"> <True> <EMISSIVE_CODE> (A:FUEL SELECTED TRANSFER MODE, Enum) 5 == (A:FUEL TRANSFER PUMP ON:#ID#, Bool) and </EMISSIVE_CODE> </True> <False> <EMISSIVE_CODE> (A:FUEL SELECTED TRANSFER MODE, Enum) 0 > </EMISSIVE_CODE> </False> </Condition> </UseTemplate> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID
- ID
Templates used:
-
ASOBO_SAFETY_Indicator_Template
Condition: Check(USE_CUSTOM_MODE)
-
Case: True
Parameters set:
- EMISSIVE_CODE (using ID)
-
Case: False
Parameters set:
- EMISSIVE_CODE
-
-
Default
-
ASOBO_SAFETY_Indicator_FuelPump_Template
Definition from XML<Template Name="ASOBO_SAFETY_Indicator_FuelPump_Template"> <Parameters Type="Default"> <NODE_ID>SAFETY_Indicator_FuelPump</NODE_ID> <PUMP_ID>1</PUMP_ID> <USE_FUELSYSTEM>True</USE_FUELSYSTEM> </Parameters> <Parameters Type="Default"> <Condition Valid="USE_FUELSYSTEM"> <True> <EMISSIVE_CODE>(A:FUELSYSTEM PUMP ACTIVE:#PUMP_ID#, Bool)</EMISSIVE_CODE> </True> <False> <EMISSIVE_CODE>(A:GENERAL ENG FUEL PUMP ON:#PUMP_ID#, Bool)</EMISSIVE_CODE> </False> </Condition> </Parameters> <UseTemplate Name="ASOBO_SAFETY_Indicator_Warning_Template"/> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID
- PUMP_ID
- USE_FUELSYSTEM
-
Default
Condition: Valid(USE_FUELSYSTEM)
-
Case: True
Parameters set:
- EMISSIVE_CODE (using PUMP_ID)
-
Case: False
Parameters set:
- EMISSIVE_CODE (using PUMP_ID)
-
Templates used:
-
Default
-
ASOBO_SAFETY_Indicator_Start_Template
Definition from XML<Template Name="ASOBO_SAFETY_Indicator_Start_Template"> <Parameters Type="Default"> <NODE_ID>SAFETY_Indicator_Start</NODE_ID> </Parameters> <UseTemplate Name="ASOBO_SAFETY_Indicator_Warning_Template"/> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID
Templates used:
-
Default
-
ASOBO_SAFETY_Indicator_Doors_Template
Definition from XML<Template Name="ASOBO_SAFETY_Indicator_Doors_Template"> <Parameters Type="Default"> <NODE_ID>SAFETY_Indicator_Doors</NODE_ID> <SIMVAR>CANOPY OPEN</SIMVAR> </Parameters> <UseTemplate Name="ASOBO_SAFETY_Indicator_Warning_Template"> <EMISSIVE_CODE>(A:#SIMVAR#, percent) 0 ></EMISSIVE_CODE> </UseTemplate> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID
- SIMVAR
Templates used:
-
ASOBO_SAFETY_Indicator_Warning_Template
Parameters set:
- EMISSIVE_CODE (using SIMVAR)
-
Default
-
ASOBO_SAFETY_Indicator_TrimFail_Template
Definition from XML<Template Name="ASOBO_SAFETY_Indicator_TrimFail_Template"> <Parameters Type="Default"> <NODE_ID>SAFETY_Indicator_TrimFail</NODE_ID> </Parameters> <UseTemplate Name="ASOBO_SAFETY_Indicator_Warning_Template"/> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID
Templates used:
-
Default
-
ASOBO_SAFETY_Indicator_RPM_Template
Definition from XML<Template Name="ASOBO_SAFETY_Indicator_RPM_Template"> <Parameters Type="Default"> <NODE_ID>SAFETY_Indicator_RPM</NODE_ID> <THRESHOLD>3200</THRESHOLD> <ID>1</ID> </Parameters> <UseTemplate Name="ASOBO_SAFETY_Indicator_Warning_Template"> <EMISSIVE_CODE>(A:GENERAL ENG RPM:#ID#, rpm) #THRESHOLD# ></EMISSIVE_CODE> </UseTemplate> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID
- THRESHOLD
- ID
Templates used:
-
ASOBO_SAFETY_Indicator_Warning_Template
Parameters set:
- EMISSIVE_CODE (using ID, THRESHOLD)
-
Default
-
ASOBO_SAFETY_Indicator_Accelerometer_Template
Definition from XML<Template Name="ASOBO_SAFETY_Indicator_Accelerometer_Template"> <Parameters Type="Default"> <NODE_ID>SAFETY_Indicator_Accelerometer</NODE_ID> <MAX_NEGATIVE>-5</MAX_NEGATIVE> <MAX_POSITIVE>10</MAX_POSITIVE> </Parameters> <UseTemplate Name="ASOBO_SAFETY_Indicator_Warning_Template"> <EMISSIVE_CODE>(A:G FORCE, GForce) s0 #MAX_NEGATIVE# < l0 #MAX_POSITIVE# > or</EMISSIVE_CODE> </UseTemplate> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID
- MAX_NEGATIVE
- MAX_POSITIVE
Templates used:
-
ASOBO_SAFETY_Indicator_Warning_Template
Parameters set:
- EMISSIVE_CODE (using MAX_NEGATIVE, MAX_POSITIVE)
-
Default
-
ASOBO_SAFETY_Indicator_HydraulicsPressure_Template
Definition from XML<Template Name="ASOBO_SAFETY_Indicator_HydraulicsPressure_Template"> <Parameters Type="Default"> <NODE_ID>SAFETY_Indicator_HydraulicsPressure</NODE_ID> <PRESSURE_THRESHOLD_PSI>150</PRESSURE_THRESHOLD_PSI> <ID>1</ID> </Parameters> <UseTemplate Name="ASOBO_SAFETY_Indicator_Warning_Template"> <EMISSIVE_CODE>(A:HYDRAULIC PRESSURE:#ID#, psi) #PRESSURE_THRESHOLD_PSI# (A:HYDRAULIC RESERVOIR PERCENT:#ID#, percent over 100) * <</EMISSIVE_CODE> </UseTemplate> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID
- PRESSURE_THRESHOLD_PSI
- ID
Templates used:
-
ASOBO_SAFETY_Indicator_Warning_Template
Parameters set:
- EMISSIVE_CODE (using ID, PRESSURE_THRESHOLD_PSI)
-
Default
-
ASOBO_SAFETY_Indicator_HydraulicsFailure_Template
Definition from XML<Template Name="ASOBO_SAFETY_Indicator_HydraulicsFailure_Template"> <Parameters Type="Default"> <NODE_ID>SAFETY_Indicator_HydraulicsFailure</NODE_ID> <PERCENT_THRESHOLD>1</PERCENT_THRESHOLD> <MIN_INTEGRITY>0.1</MIN_INTEGRITY> <ID>1</ID> </Parameters> <UseTemplate Name="ASOBO_SAFETY_Indicator_Warning_Template"> <EMISSIVE_CODE>(A:HYDRAULIC RESERVOIR PERCENT:#ID#, percent) #PERCENT_THRESHOLD# < (A:HYDRAULIC SYSTEM INTEGRITY, Bool) #MIN_INTEGRITY# < or</EMISSIVE_CODE> </UseTemplate> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID
- PERCENT_THRESHOLD
- MIN_INTEGRITY
- ID
Templates used:
-
ASOBO_SAFETY_Indicator_Warning_Template
Parameters set:
- EMISSIVE_CODE (using ID, PERCENT_THRESHOLD, MIN_INTEGRITY)
-
Default
-
ASOBO_SAFETY_Indicator_NavGps_Template
Definition from XML<Template Name="ASOBO_SAFETY_Indicator_NavGps_Template"> <Parameters Type="Default"> <NODE_ID_NAV>SAFETY_Indicator_Nav</NODE_ID_NAV> <NODE_ID_GPS>SAFETY_Indicator_Gps</NODE_ID_GPS> </Parameters> <UseTemplate Name="ASOBO_SAFETY_Indicator_Template"> <NODE_ID>#NODE_ID_GPS#</NODE_ID> <EMISSIVE_CODE>(A:GPS DRIVES NAV1, bool)</EMISSIVE_CODE> </UseTemplate> <UseTemplate Name="ASOBO_SAFETY_Indicator_Template"> <NODE_ID>#NODE_ID_NAV#</NODE_ID> <EMISSIVE_CODE>(A:GPS DRIVES NAV1, bool) !</EMISSIVE_CODE> </UseTemplate> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID_NAV
- NODE_ID_GPS
Templates used:
-
ASOBO_SAFETY_Indicator_Template
Parameters set:
- NODE_ID (using NODE_ID_GPS)
- EMISSIVE_CODE
-
ASOBO_SAFETY_Indicator_Template
Parameters set:
- NODE_ID (using NODE_ID_NAV)
- EMISSIVE_CODE
-
Default
-
ASOBO_SAFETY_Indicator_GpsApr_Template
Definition from XML<Template Name="ASOBO_SAFETY_Indicator_GpsApr_Template"> <Parameters Type="Default"> <NODE_ID_GPS>SAFETY_Indicator_Gps</NODE_ID_GPS> <NODE_ID_APR>SAFETY_Indicator_Apr</NODE_ID_APR> </Parameters> <UseTemplate Name="ASOBO_SAFETY_Indicator_Template"> <NODE_ID>#NODE_ID_GPS#</NODE_ID> <EMISSIVE_CODE>0</EMISSIVE_CODE> </UseTemplate> <UseTemplate Name="ASOBO_SAFETY_Indicator_Template"> <NODE_ID>#NODE_ID_APR#</NODE_ID> <EMISSIVE_CODE>0</EMISSIVE_CODE> </UseTemplate> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID_GPS
- NODE_ID_APR
Templates used:
-
ASOBO_SAFETY_Indicator_Template
Parameters set:
- NODE_ID (using NODE_ID_GPS)
- EMISSIVE_CODE
-
ASOBO_SAFETY_Indicator_Template
Parameters set:
- NODE_ID (using NODE_ID_APR)
- EMISSIVE_CODE
-
Default
-
ASOBO_SAFETY_Indicator_Knob_LandingGear_Template
Definition from XML<Template Name="ASOBO_SAFETY_Indicator_Knob_LandingGear_Template"> <Parameters Type="Default"> <SIDE>LEFT</SIDE> </Parameters> <Parameters Type="Default"> <IE_PREFIX>Indicator_LandingGear_#SIDE#</IE_PREFIX> <NODE_ID>SAFETY_Indicator_Knob_LandingGear_#SIDE#</NODE_ID> <NODE_ID_EMISSIVE>SAFETY_Indicator_Knob_LandingGear_#SIDE#_Emissive</NODE_ID_EMISSIVE> <ANIM_NAME_KNOB>SAFETY_Indicator_Knob_LandingGear_#SIDE#</ANIM_NAME_KNOB> <ANIM_NAME_PUSH>SAFETY_Indicator_Knob_LandingGear_#SIDE#_Push</ANIM_NAME_PUSH> <TOOLTIP_TITLE_KNOB>@TT_Package.LANDING_GEAR_INDICATOR_KNOB_TITLE</TOOLTIP_TITLE_KNOB> <TT_DESCRIPTION_ID>@TT_Package.LANDING_GEAR_INDICATOR_KNOB_ACTION</TT_DESCRIPTION_ID> <TT_DESCRIPTION_ID_PUSH>@TT_Package.LANDING_GEAR_SWITCH_CHECK_LIGHT_TEST_ACTION</TT_DESCRIPTION_ID_PUSH> <IS_TIMED>True</IS_TIMED> <SET_STATE_EXTERNAL> p0 (>L:XMLVAR_LandingGear_Test_#SIDE#, bool) p0 0 == if{ 0 (>O:_PressTime) 0 (>O:_PressForDuration) } p0 1 == if{ (E:SIMULATION TIME, second) (>O:_PressTime) p1 (>O:_PressForDuration) } </SET_STATE_EXTERNAL> <ANIM_CODE_KNOB>(A:LIGHT POTENTIOMETER:#POTENTIOMETER#, Percent)</ANIM_CODE_KNOB> <COUNT>25</COUNT> </Parameters> <Condition Check="NO_EMISSIVE"> <False> <Component ID="#NODE_ID_EMISSIVE#" Node="#NODE_ID_EMISSIVE#"> <UseTemplate Name="ASOBO_GT_Emissive_Gauge"> <EMISSIVE_CODE> (L:XMLVAR_LandingGear_Test_#SIDE#, bool) (A:GEAR #SIDE# POSITION, Percent over 100) 1 == or (A:LIGHT POTENTIOMETER:#POTENTIOMETER#, Percent over 100) * </EMISSIVE_CODE> </UseTemplate> </Component> </False> </Condition> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <UseTemplate Name="ASOBO_SAFETY_Push_Event_Base_Template"> <IE_NAME>#IE_PREFIX#_Knob_Button</IE_NAME> <EXTRA_OPTION>_Held</EXTRA_OPTION> <INTERACTION_TYPE>Push</INTERACTION_TYPE> <VALUE_CODE>(L:XMLVAR_LandingGear_Test_#SIDE#, bool)</VALUE_CODE> <TT_DESCRIPTION_ID>#TT_DESCRIPTION_ID_PUSH#</TT_DESCRIPTION_ID> </UseTemplate> <UseTemplate Name="ASOBO_SAFETY_Base_Template"> <IE_NAME>#IE_PREFIX#_Knob</IE_NAME> <INTERACTION_TYPE>Knob</INTERACTION_TYPE> <CREATE_COMPONENT>False</CREATE_COMPONENT> <SET_STATE_EXTERNAL>0 > if{ #POTENTIOMETER# (>K:LIGHT_POTENTIOMETER_DEC) } els{ #POTENTIOMETER# (>K:LIGHT_POTENTIOMETER_INC) }</SET_STATE_EXTERNAL> <IE_ID_EXTERNAL_0>#IE_PREFIX#_Knob_Button</IE_ID_EXTERNAL_0> <TOOLTIP_TITLE>#TOOLTIP_TITLE_KNOB#</TOOLTIP_TITLE> </UseTemplate> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- SIDE
-
Default
Parameters set:
- IE_PREFIX (using SIDE)
- NODE_ID (using SIDE)
- NODE_ID_EMISSIVE (using SIDE)
- ANIM_NAME_KNOB (using SIDE)
- ANIM_NAME_PUSH (using SIDE)
- TOOLTIP_TITLE_KNOB
- TT_DESCRIPTION_ID
- TT_DESCRIPTION_ID_PUSH
- IS_TIMED
- SET_STATE_EXTERNAL (using SIDE)
- ANIM_CODE_KNOB (using POTENTIOMETER)
- COUNT
Parameters read:
- NODE_ID
Components:
-
#NODE_ID# (Node: #NODE_ID#)
Templates used:
-
ASOBO_SAFETY_Push_Event_Base_Template
Parameters set:
- IE_NAME (using IE_PREFIX)
- EXTRA_OPTION
- INTERACTION_TYPE
- VALUE_CODE (using SIDE)
- TT_DESCRIPTION_ID (using TT_DESCRIPTION_ID_PUSH)
-
ASOBO_SAFETY_Base_Template
Parameters set:
- IE_NAME (using IE_PREFIX)
- INTERACTION_TYPE
- CREATE_COMPONENT
- SET_STATE_EXTERNAL (using POTENTIOMETER)
- IE_ID_EXTERNAL_0 (using IE_PREFIX)
- TOOLTIP_TITLE (using TOOLTIP_TITLE_KNOB)
-
ASOBO_SAFETY_Push_Event_Base_Template
Condition: Check(NO_EMISSIVE)
-
Case: False
Parameters read:
- NODE_ID_EMISSIVE
Components:
-
#NODE_ID_EMISSIVE# (Node: #NODE_ID_EMISSIVE#)
Templates used:
-
ASOBO_GT_Emissive_Gauge
Parameters set:
- EMISSIVE_CODE (using SIDE, POTENTIOMETER)
-
ASOBO_GT_Emissive_Gauge
-
Default
-
ASOBO_SAFETY_Indicator_Knob_Dimmer_Push_Test
Definition from XML<Template Name="ASOBO_SAFETY_Indicator_Knob_Dimmer_Push_Test"> <Parameters Type="Default"> <EMISSIVE_CODE>1</EMISSIVE_CODE> <TYPE>ALT</TYPE> </Parameters> <Parameters Type="Default"> <IE_PREFIX>Indicator_#TYPE#</IE_PREFIX> <POTENTIOMETER>1</POTENTIOMETER> <NODE_ID_EMISSIVE>KNOB_WARNING_#TYPE#_Button</NODE_ID_EMISSIVE> <NODE_ID>Knob_Warning_#TYPE#</NODE_ID> <ANIM_NAME_KNOB>Knob_Warning_#TYPE#</ANIM_NAME_KNOB> <ANIM_NAME_PUSH>KNOB_WARNING_#TYPE#_Button</ANIM_NAME_PUSH> <TOOLTIP_TITLE_KNOB>@TT_Package.SAFETY_KNOB_WARNING_#TYPE#_TITLE</TOOLTIP_TITLE_KNOB> <TT_DESCRIPTION_ID>@TT_Package.SAFETY_KNOB_WARNING_#TYPE#_ACTION</TT_DESCRIPTION_ID> <TT_DESCRIPTION_ID_PUSH>@TT_Package.SAFETY_KNOB_WARNING_#TYPE#_ACTION_PUSH</TT_DESCRIPTION_ID_PUSH> <IS_TIMED>True</IS_TIMED> </Parameters> <Component ID="#NODE_ID_EMISSIVE#" Node="#NODE_ID_EMISSIVE#"> <UseTemplate Name="ASOBO_GT_Emissive_Potentiometer"> <ALT_CODE>(L:XML_Push_#TYPE#, Bool)</ALT_CODE> </UseTemplate> </Component> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <UseTemplate Name="ASOBO_SAFETY_Push_Event_Base_Template"> <IE_NAME>#IE_PREFIX#_Knob_Button</IE_NAME> <EXTRA_OPTION>_Held</EXTRA_OPTION> <INTERACTION_TYPE>Push</INTERACTION_TYPE> <SET_STATE_EXTERNAL> p0 (>L:XML_Push_#TYPE#, bool) p0 0 == if{ 0 (>O:_PressTime) 0 (>O:_PressForDuration) } p0 1 == if{ (E:SIMULATION TIME, second) (>O:_PressTime) p1 (>O:_PressForDuration) } </SET_STATE_EXTERNAL> <VALUE_CODE>(L:XMLVAR_#TYPE#_Test, bool)</VALUE_CODE> <TT_DESCRIPTION_ID>#TT_DESCRIPTION_ID_PUSH#</TT_DESCRIPTION_ID> </UseTemplate> <UseTemplate Name="ASOBO_SAFETY_Base_Template"> <IE_NAME>#IE_PREFIX#_Knob</IE_NAME> <INTERACTION_TYPE>Knob</INTERACTION_TYPE> <CREATE_COMPONENT>False</CREATE_COMPONENT> <WRAP>False</WRAP> <ANIM_CODE_KNOB>100 (A:LIGHT POTENTIOMETER:#POTENTIOMETER#, Percent) -</ANIM_CODE_KNOB> <SET_STATE_EXTERNAL>0 > if{ #POTENTIOMETER# (>K:LIGHT_POTENTIOMETER_DEC) } els{ #POTENTIOMETER# (>K:LIGHT_POTENTIOMETER_INC) }</SET_STATE_EXTERNAL> <IE_ID_EXTERNAL_0>#IE_PREFIX#_Knob_Button</IE_ID_EXTERNAL_0> <TOOLTIP_TITLE>#TOOLTIP_TITLE_KNOB#</TOOLTIP_TITLE> </UseTemplate> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- EMISSIVE_CODE
- TYPE
-
Default
Parameters set:
- IE_PREFIX (using TYPE)
- POTENTIOMETER
- NODE_ID_EMISSIVE (using TYPE)
- NODE_ID (using TYPE)
- ANIM_NAME_KNOB (using TYPE)
- ANIM_NAME_PUSH (using TYPE)
- TOOLTIP_TITLE_KNOB (using TYPE)
- TT_DESCRIPTION_ID (using TYPE)
- TT_DESCRIPTION_ID_PUSH (using TYPE)
- IS_TIMED
Parameters read:
- NODE_ID_EMISSIVE
- NODE_ID
Components:
-
#NODE_ID_EMISSIVE# (Node: #NODE_ID_EMISSIVE#)
Templates used:
-
ASOBO_GT_Emissive_Potentiometer
Parameters set:
- ALT_CODE (using TYPE)
-
ASOBO_GT_Emissive_Potentiometer
-
#NODE_ID# (Node: #NODE_ID#)
Templates used:
-
ASOBO_SAFETY_Push_Event_Base_Template
Parameters set:
- IE_NAME (using IE_PREFIX)
- EXTRA_OPTION
- INTERACTION_TYPE
- SET_STATE_EXTERNAL (using TYPE)
- VALUE_CODE (using TYPE)
- TT_DESCRIPTION_ID (using TT_DESCRIPTION_ID_PUSH)
-
ASOBO_SAFETY_Base_Template
Parameters set:
- IE_NAME (using IE_PREFIX)
- INTERACTION_TYPE
- CREATE_COMPONENT
- WRAP
- ANIM_CODE_KNOB (using POTENTIOMETER)
- SET_STATE_EXTERNAL (using POTENTIOMETER)
- IE_ID_EXTERNAL_0 (using IE_PREFIX)
- TOOLTIP_TITLE (using TOOLTIP_TITLE_KNOB)
-
ASOBO_SAFETY_Push_Event_Base_Template
-
Default
-
ASOBO_SAFETY_Base_Template
Definition from XML<Template Name="ASOBO_SAFETY_Base_Template"> <Parameters Type="Default"> <INPUT_EVENT_ID_SOURCE>SAFETY</INPUT_EVENT_ID_SOURCE> <WWISE_PREFIX>SAFETY</WWISE_PREFIX> </Parameters> <UseTemplate Name="ASOBO_Interaction_Base_Template"> <USE_INPUT_EVENT_ID>SAFETY</USE_INPUT_EVENT_ID> </UseTemplate> </Template>Parameters initialization:
-
Default
Parameters set:
- INPUT_EVENT_ID_SOURCE
- WWISE_PREFIX
Templates used:
-
ASOBO_Interaction_Base_Template
Parameters set:
- USE_INPUT_EVENT_ID
-
Default
-
ASOBO_SAFETY_Push_Event_Base_Template
Definition from XML<Template Name="ASOBO_SAFETY_Push_Event_Base_Template"> <UseTemplate Name="ASOBO_Interaction_Push_Event_Base_Template"> <USE_INPUT_EVENT_ID>SAFETY</USE_INPUT_EVENT_ID> </UseTemplate> </Template>Templates used:
-
ASOBO_Interaction_Push_Event_Base_Template
Parameters set:
- USE_INPUT_EVENT_ID
-
ASOBO_Interaction_Push_Event_Base_Template
-
ASOBO_SAFETY_Pull_Event_Base_Template
Definition from XML<Template Name="ASOBO_SAFETY_Pull_Event_Base_Template"> <UseTemplate Name="ASOBO_Interaction_Pull_Event_Base_Template"> <USE_INPUT_EVENT_ID>SAFETY</USE_INPUT_EVENT_ID> </UseTemplate> </Template>Templates used:
-
ASOBO_Interaction_Pull_Event_Base_Template
Parameters set:
- USE_INPUT_EVENT_ID
-
ASOBO_Interaction_Pull_Event_Base_Template