AIRCRAFT FLIGHT CONTROL EVENTS

The event IDs listed here are all related to the different view and camera systems.

 

 

Ailerons

Event Name Parameters Description
AILERON_CENTER N/A

Centers aileron position. Note that this is simply an alias for the CENTER_AILER_RUDDER event.

Not currently used in the simulation.

AILERON_LEFT N/A

Increments the left aileron by 1°. Note that this is simply an alias for the AILERONS_LEFT event.

AILERON_RIGHT N/A

Increments the right aileron by 1°. Note that this is simply an alias for the AILERONS_RIGHT event.

AILERON_SET [0] Position (-16383 to 16384) Sets the aileron position.
AILERON_TRIM_DISABLED_SET [0]: Bool Enable (1, TRUE) or disable (0, FALSE) the aileron trim.
AILERON_TRIM_DISABLED_TOGGLE N/A Toggle the aileron trim disabled option between on (1) and off (0).
AILERON_TRIM_LEFT N/A Increments the left aileron trim by 0.001.
AILERON_TRIM_RIGHT N/A Increments the right aileron trim by 0.001.
AILERON_TRIM_SET [0] Position (-100 to 100) Sets the aileron trim.
AILERON_TRIM_SET_EX1 [0] Position (-16383 to 16384) Sets the aileron trim with extra precision.
AILERONS_LEFT N/A Increments the left ailerons by 1°.
AILERONS_RIGHT N/A Increments the right ailerons by 1°.
AXIS_AILERONS_SET [0] Position (-16383 to 16384) Sets the aileron position.
CENTER_AILER_RUDDER N/A Centers the aileron and rudder positions.

 

 

Elevators

Event Name Parameters Description
AXIS_ELEV_TRIM_SET [0]: Trim position (-16383 to 16384) Sets the elevator trim position (input will be normalised to a value between -1 and 1).
AXIS_ELEVATOR_SET [0]: Position (-16383 to 16384) Sets the elevator position (input will be normalised to a value between -1 and 1). Note that this is simply an alias for the ELEVATOR_SET event.
ELEV_DOWN N/A

Decrements the elevator by -0.05 (to a minimum of -1). When the key is released the elevator will return to it's original position.

Note that this is simply an alias for the ELEVATOR_DOWN event.

ELEV_TRIM_DN N/A Decrements the elevator trim by -0.0005. Holding down the key will cause the trim to decrement faster over time.
ELEV_TRIM_UP N/A Increments the elevator trim by 0.0005. Holding down the key will cause the trim to increment faster over time.
ELEV_UP N/A

Increments elevator by 0.05 (to a maximum of 1). When the key is released the elevator will return to it's original position.

Note that this is simply an alias for the ELEVATOR_UP event.

ELEVATOR_DOWN N/A

Decrements the elevator by -0.05 (to a minimum of -1). When the key is released the elevator will return to it's original position.

ELEVATOR_SET [0]: Position (-16383 to 16384) Sets elevator position (input will be normalised to a value between -1 and 1).
ELEVATOR_TRIM_DISABLED_SET [0]: Bool Sets the Elevator Trim Disabled to be on (TRUE) or off (FALSE).
ELEVATOR_TRIM_DISABLED_TOGGLE N/A Toggles the Elevator Trim Disabled between on (1, TRUE) and off (0, FALSE).
ELEVATOR_TRIM_SET [0]: Trim position (-16383 to 16384) Sets the elevator trim position.
ELEVATOR_UP N/A

Increments the elevator by 0.05 (to a maximum of 1). When the key is released the elevator will return to it's original position.

 

 

Flaps

Event Name Parameters Description
AXIS_FLAPS_SET Sets flap handle to closest increment (-16383 - +16383)
FLAPS_1 Sets flap handle to first extension position
FLAPS_2 Sets flap handle to second extension position
FLAPS_3 Sets flap handle to third extension position
FLAPS_4 Sets flap handle to fourth extension position
FLAPS_CONTINUOUS_DECR
FLAPS_CONTINUOUS_INCR
FLAPS_CONTINUOUS_SET
FLAPS_DECR Decrements flap handle position
FLAPS_DOWN Sets flap handle to full extension position
FLAPS_INCR Increments flap handle position
FLAPS_SET Sets flap handle to closest increment (0 to 16383)
FLAPS_UP Sets flap handle to full retract position

 

 

 

Miscellaneous

Event Name Parameters Description
CENTER_NT361_CHECK N/A Check to see if NT 361 Flight Trainer should be centered
CHVPP_LEFT_HAT_UP N/A CH Virtual Pilot Pro up - left hat keypress.
CHVPP_LEFT_HAT_DOWN N/A CH Virtual Pilot Pro down - left hat keypress.
CHVPP_AP_ALT_WING N/A CH Virtual Pilot Pro altitude hold and wing level.
MOUSE_AS_YOKE_RESUME Not currently used in the simulation.
MOUSE_AS_YOKE_SUSPEND Not currently used in the simulation.
MOUSE_AS_YOKE_TOGGLE Not currently used in the simulation.

 

 

Rudder

Event Name Parameters Description
AUTORUDDER_TOGGLE

N/A

Turn the automatic rudder control feature on or off.
AXIS_RUDDER_SET

[0]: Value to set

Sets rudder position (-16383 - +16383)
RUDDER_AXIS_MINUS

N/A

RUDDER_AXIS_PLUS

N/A

RUDDER_CENTER

N/A

Centers rudder position
RUDDER_LEFT

N/A

Increments rudder left
RUDDER_RIGHT

N/A

Increments rudder right
RUDDER_SET

[0]: Value to set

Sets rudder position (-16383 - +16383)
RUDDER_TRIM_DISABLED_SET

[0]: Bool

Enables (TRUE) or disables (FALSE) the rudder trim.
RUDDER_TRIM_DISABLED_TOGGLE

N/A

Toggles the rudder trim on (TRUE) or off (FALSE).
RUDDER_TRIM_LEFT

N/A

Increments rudder trim left
RUDDER_TRIM_RESET

N/A

RUDDER_TRIM_RIGHT

N/A

Increments aileron trim right
RUDDER_TRIM_SET

[0]: Value to set

Sets the rudder trim value, between -100 and 100.
RUDDER_TRIM_SET_EX1

[0]: Value to set

Sets the rudder trim value, between -16383 and 16383.

 

 

Slew

Event Name Parameters Description
AXIS_SLEW_AHEAD_SET

[0]: Value to set

Sets forward slew (+/- 16383)
AXIS_SLEW_ALT_SET

[0]: Value to set

Sets vertical slew (+/- 16383)
AXIS_SLEW_BANK_SET

[0]: Value to set

Sets roll slew (+/- 16383)
AXIS_SLEW_HEADING_SET

[0]: Value to set

Sets heading slew (+/- 16383)
AXIS_SLEW_PITCH_SET

[0]: Value to set

Sets pitch slew (+/- 16383)
AXIS_SLEW_SIDEWAYS_SET

[0]: Value to set

Sets sideways slew (+/- 16383)
SLEW_AHEAD_MINUS N/A Decrease forward slew
SLEW_AHEAD_PLUS N/A Increase forward slew
SLEW_ALTIT_DN_FAST N/A Slew downward fast
SLEW_ALTIT_DN_SLOW N/A Slew downward slow
SLEW_ALTIT_FREEZE N/A Stop vertical slew
SLEW_ALTIT_MINUS N/A Decrease upward slew
SLEW_ALTIT_PLUS N/A Increase upward slew
SLEW_ALTIT_UP_FAST N/A Slew upward fast
SLEW_ALTIT_UP_SLOW N/A Slew upward slow
SLEW_BANK_MINUS N/A Increase left bank slew
SLEW_BANK_PLUS N/A Increase right bank slew
SLEW_FREEZE N/A Stop all slew
SLEW_HEADING_MINUS N/A Increase slew heading to the left
SLEW_HEADING_PLUS N/A Increase slew heading to the right
SLEW_LEFT N/A Slew to the left
SLEW_OFF N/A Turns slew off
SLEW_ON N/A Turns slew on
SLEW_PITCH_DN_FAST N/A Slew pitch downward fast
SLEW_PITCH_DN_SLOW N/A Slew pitch downward slow
SLEW_PITCH_FREEZE N/A Stop pitch slew
SLEW_PITCH_MINUS N/A Decrease pitch up slew
SLEW_PITCH_PLUS N/A Increase pitch up slew
SLEW_PITCH_UP_FAST N/A Slew pitch upward fast
SLEW_PITCH_UP_SLOW N/A Slew pitch up slow
SLEW_RESET N/A Stop slew and reset pitch, bank, and heading all to zero.
SLEW_RIGHT N/A Slew to the right
SLEW_SET

[0]: Bool

Sets slew on/off (1,0)
SLEW_TOGGLE

N/A

Toggles slew on/off

 

 

Spoilers

Event Name Parameters Description
AXIS_SPOILER_SET [0]: Positon (0 - 1) Sets spoiler handle position.
SPOILERS_ARM_OFF N/A Sets auto-spoiler arming off (0).
SPOILERS_ARM_ON N/A Sets auto-spoiler arming on (1).
SPOILERS_ARM_SET [0]: Bool Sets auto-spoiler arming (0,1).
SPOILERS_ARM_TOGGLE N/A Toggles arming of auto-spoilers between armed (1) and unarmed (0).
SPOILERS_DEC N/A Decremement the spoilers by (down to a minimum of 0).
SPOILERS_INC N/A Increment the spoilers by (down to a minimum of 0).
SPOILERS_OFF N/A Sets spoiler handle to full retract position.
SPOILERS_ON N/A Sets spoiler handle to full extend position.
SPOILERS_SET [0]: Position (0 to 16383) Sets spoiler handle position.
SPOILERS_TOGGLE N/A Toggles spoiler handle.

 

 

Concorde (Deprecated)

Event Name Description
INC_CONCORDE_NOSE_VISOR
DEC_CONCORDE_NOSE_VISOR
CONCORDE_NOSE_VISOR_FULL_EXT
CONCORDE_NOSE_VISOR_FULL_RET