Asobo\Transponder\AS330.xml

Includes

• ModelBehaviorFile: Asobo\Generic.xml
• ModelBehaviorFile: Asobo\Transponder\Transponder.xml

Templates

• ASOBO_AS330_Template

  Definition from XML
  <Template Name="ASOBO_AS330_Template"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <UseTemplate Name="ASOBO_GT_Helper_Suffix_ID_Appender"> <TEMPLATE_TO_CALL>ASOBO_AS330_SubTemplate</TEMPLATE_TO_CALL> </UseTemplate> </Template>

  Parameters initialization:

  • Default

    Parameters set:

    • ID

  Templates used:

  • ASOBO_GT_Helper_Suffix_ID_Appender
    • May include a subtemplate using the parameter 'TEMPLATE_TO_CALL' and resolve to the following template(s):
      • ASOBO_AS330_SubTemplate

    Parameters set:

    • TEMPLATE_TO_CALL
  [Go back to top] [Go back to index]

• ASOBO_AS330_SubTemplate

  Definition from XML
  <Template Name="ASOBO_AS330_SubTemplate"> <Parameters Type="Default"> <AS330>TRANSPONDER</AS330> <ANIM_NEVER_FAILS/> <EMISSIVE_DEFAULT_VALUE>0.5</EMISSIVE_DEFAULT_VALUE> <Condition Check="CIRCUIT_ID"> <True> <FAILURE>(A:CIRCUIT ON:#CIRCUIT_ID#, Bool)</FAILURE> </True> <False> <FAILURE>(A:TRANSPONDER STATE:1, Enum) 0 &gt; (A:CIRCUIT AVIONICS ON, Bool) and</FAILURE> </False> </Condition> </Parameters> <Parameters Type="Default"> <Switch> <Case NotEmpty="SIMVAR_POWER_SETTING"> <EMISSIVE_CODE>(A:#SIMVAR_POWER_SETTING#, percent over 100) #EMISSIVE_DEFAULT_VALUE# *</EMISSIVE_CODE> </Case> <Case NotEmpty="POTENTIOMETER"> <EMISSIVE_CODE>(A:LIGHT POTENTIOMETER:#POTENTIOMETER#, percent over 100) #EMISSIVE_DEFAULT_VALUE# *</EMISSIVE_CODE> </Case> <Default> <EMISSIVE_CODE>#EMISSIVE_DEFAULT_VALUE#</EMISSIVE_CODE> </Default> </Switch> <NODE_ID_FRAME>#AS330#_Screen#SUFFIX_ID#</NODE_ID_FRAME> </Parameters> <Parameters Type="Override"> <PUSH_ID_1>ALT</PUSH_ID_1> <PUSH_ID_2>CLR</PUSH_ID_2> <PUSH_ID_3>CRSR</PUSH_ID_3> <PUSH_ID_4>FUNC</PUSH_ID_4> <PUSH_ID_5>IDT</PUSH_ID_5> <EVENT_TYPE_IDT>K</EVENT_TYPE_IDT> <EVENT_PUSH_IDT>XPNDR_IDENT_ON</EVENT_PUSH_IDT> <TT_VALUE_IDT>(A:TRANSPONDER IDENT:1, Bool) @TT_OnOff_Cond</TT_VALUE_IDT> <TT_VALUE_IS_DYNAMIC_IDT>True</TT_VALUE_IS_DYNAMIC_IDT> <PUSH_ID_6>ON</PUSH_ID_6> <PUSH_ID_7>OFF</PUSH_ID_7> <PUSH_ID_8>STARTSTOP</PUSH_ID_8> <PUSH_ID_9>STBY</PUSH_ID_9> <PUSH_ID_10>VFR</PUSH_ID_10> </Parameters> <Parameters Type="Default"> <Loop> <Setup> <Param>CUR_ID</Param> <From>1</From> <Inc>1</Inc> <To>10</To> </Setup> <Do> <Parameters Type="Override"> <ID Process="Param">PUSH_ID_#CUR_ID#</ID> </Parameters> <NODE_ID_#ID#>TRANSPONDER_Push_#ID##SUFFIX_ID#</NODE_ID_#ID#> <ANIM_NAME_#ID#>TRANSPONDER_Push_#ID##SUFFIX_ID#</ANIM_NAME_#ID#> <TT_DESCRIPTION_ID_#ID#>@TT_Package.TRANSPONDER_PUSH_#ID#_ACTION</TT_DESCRIPTION_ID_#ID#> <TOOLTIP_TITLE_#ID#>@TT_Package.TRANSPONDER_PUSH_#ID#_TITLE</TOOLTIP_TITLE_#ID#> </Do> </Loop> <Loop> <Setup> <Param>CUR_ID</Param> <From>0</From> <Inc>1</Inc> <To>9</To> </Setup> <Do> <NODE_ID_#CUR_ID#>TRANSPONDER_Push_#CUR_ID##SUFFIX_ID#</NODE_ID_#CUR_ID#> <ANIM_NAME_#CUR_ID#>TRANSPONDER_Push_#CUR_ID##SUFFIX_ID#</ANIM_NAME_#CUR_ID#> </Do> </Loop> </Parameters> <Loop> <Setup> <Param>CUR_ID</Param> <From>1</From> <Inc>1</Inc> <To>10</To> </Setup> <Do> <Parameters Type="Override"> <ID Process="Param">PUSH_ID_#CUR_ID#</ID> </Parameters> <Parameters Type="Override"> <NODE_ID Process="Param">NODE_ID_#ID#</NODE_ID> <ANIM_NAME Process="Param">ANIM_NAME_#ID#</ANIM_NAME> <TT_DESCRIPTION_ID Process="Param">TT_DESCRIPTION_ID_#ID#</TT_DESCRIPTION_ID> <TOOLTIP_TITLE Process="Param">TOOLTIP_TITLE_#ID#</TOOLTIP_TITLE> <Condition NotEmpty="EVENT_TYPE_#ID#"> <EVENT_TYPE Process="Param">EVENT_TYPE_#ID#</EVENT_TYPE> </Condition> <Condition NotEmpty="EVENT_PUSH_#ID#"> <EVENT_PUSH Process="Param">EVENT_PUSH_#ID#</EVENT_PUSH> </Condition> <Condition NotEmpty="TT_VALUE_#ID#"> <TT_VALUE Process="Param">TT_VALUE_#ID#</TT_VALUE> </Condition> <Condition NotEmpty="TT_VALUE_IS_DYNAMIC_#ID#"> <TT_VALUE_IS_DYNAMIC Process="Param">TT_VALUE_IS_DYNAMIC_#ID#</TT_VALUE_IS_DYNAMIC> </Condition> </Parameters> <UseTemplate Name="ASOBO_Transponder_Push_ID_Template"/> </Do> </Loop> <Loop> <Setup> <Param>CUR_ID</Param> <From>0</From> <Inc>1</Inc> <To>9</To> </Setup> <Do> <Parameters Type="Override"> <ID>#CUR_ID#</ID> </Parameters> <Parameters Type="Override"> <NODE_ID Process="Param">NODE_ID_#ID#</NODE_ID> <ANIM_NAME Process="Param">ANIM_NAME_#ID#</ANIM_NAME> <TT_DESCRIPTION_ID>@TT_Package.TRANSPONDER_PUSH_DIGIT_ACTION</TT_DESCRIPTION_ID> <TT_DESCRIPTION_INDEX>#ID#</TT_DESCRIPTION_INDEX> <TOOLTIP_DISABLED>True</TOOLTIP_DISABLED> </Parameters> <UseTemplate Name="ASOBO_Transponder_Push_ID_Template"/> </Do> </Loop> <Condition Valid="NO_SCREEN_EMISSIVE"> <False> <UseTemplate Name="ASOBO_GT_Component_Emissive_Gauge"> <NODE_ID>#NODE_ID_FRAME#</NODE_ID> <EMISSIVE_CODE>#EMISSIVE_DEFAULT_VALUE# (A:TRANSPONDER STATE:1, Enum) 0 &gt; *</EMISSIVE_CODE> </UseTemplate> </False> </Condition> <Condition Check="CIRCUIT_ID"> <UseTemplate Name="ASOBO_GT_Update"> <UPDATE_ONCE>True</UPDATE_ONCE> <UPDATE_CODE>(A:CIRCUIT ON:#CIRCUIT_ID#, Bool) ! (A:CIRCUIT SWITCH ON:#CIRCUIT_ID#, Bool) and if{ #CIRCUIT_ID# (&gt;K:ELECTRICAL_CIRCUIT_TOGGLE) }</UPDATE_CODE> </UseTemplate> </Condition> </Template>

  Parameters initialization:

  • Default

    Parameters set:

    • AS330
    • ANIM_NEVER_FAILS
    • EMISSIVE_DEFAULT_VALUE

    Condition: Check(CIRCUIT_ID)

    • Case: True

      Parameters set:

      • FAILURE (using CIRCUIT_ID)
    • Case: False

      Parameters set:

      • FAILURE
  • Default

    Parameters set:

    • NODE_ID_FRAME (using AS330, SUFFIX_ID)

    Condition: Switch

    • Case: NotEmpty(SIMVAR_POWER_SETTING)

      Parameters set:

      • EMISSIVE_CODE (using SIMVAR_POWER_SETTING, EMISSIVE_DEFAULT_VALUE)
    • Case: NotEmpty(POTENTIOMETER)

      Parameters set:

      • EMISSIVE_CODE (using POTENTIOMETER, EMISSIVE_DEFAULT_VALUE)
    • Default case:

      Parameters set:

      • EMISSIVE_CODE (using EMISSIVE_DEFAULT_VALUE)
  • Override

    Parameters set:

    • PUSH_ID_1
    • PUSH_ID_2
    • PUSH_ID_3
    • PUSH_ID_4
    • PUSH_ID_5
    • EVENT_TYPE_IDT
    • EVENT_PUSH_IDT
    • TT_VALUE_IDT
    • TT_VALUE_IS_DYNAMIC_IDT
    • PUSH_ID_6
    • PUSH_ID_7
    • PUSH_ID_8
    • PUSH_ID_9
    • PUSH_ID_10
  • Default

    Parameters set:

    • CUR_ID
    • ID (using CUR_ID)
    • NODE_ID_#ID# (using ID, SUFFIX_ID)
    • ANIM_NAME_#ID# (using ID, SUFFIX_ID)
    • TT_DESCRIPTION_ID_#ID# (using ID)
    • TOOLTIP_TITLE_#ID# (using ID)
    • NODE_ID_#CUR_ID# (using CUR_ID, SUFFIX_ID)
    • ANIM_NAME_#CUR_ID# (using CUR_ID, SUFFIX_ID)

  Parameters set:

  • CUR_ID
  • ID (using CUR_ID)
  • NODE_ID (using ID)
  • ANIM_NAME (using ID)
  • TT_DESCRIPTION_ID (using ID)
  • TOOLTIP_TITLE (using ID)
  • TT_DESCRIPTION_ID
  • TT_DESCRIPTION_INDEX (using ID)
  • TOOLTIP_DISABLED

  Templates used:

  • ASOBO_Transponder_Push_ID_Template
  • ASOBO_Transponder_Push_ID_Template

  Condition: NotEmpty(EVENT_TYPE_#ID#)

  • Case: True

    Parameters set:

    • EVENT_TYPE (using ID)

  Condition: NotEmpty(EVENT_PUSH_#ID#)

  • Case: True

    Parameters set:

    • EVENT_PUSH (using ID)

  Condition: NotEmpty(TT_VALUE_#ID#)

  • Case: True

    Parameters set:

    • TT_VALUE (using ID)

  Condition: NotEmpty(TT_VALUE_IS_DYNAMIC_#ID#)

  • Case: True

    Parameters set:

    • TT_VALUE_IS_DYNAMIC (using ID)

  Condition: Valid(NO_SCREEN_EMISSIVE)

  • Case: False

    Templates used:

    • ASOBO_GT_Component_Emissive_Gauge

      Parameters set:

      • NODE_ID (using NODE_ID_FRAME)
      • EMISSIVE_CODE (using EMISSIVE_DEFAULT_VALUE)

  Condition: Check(CIRCUIT_ID)

  • Case: True

    Templates used:

    • ASOBO_GT_Update

      Parameters set:

      • UPDATE_ONCE
      • UPDATE_CODE (using CIRCUIT_ID)
  [Go back to top] [Go back to index]