[Go back to index]
Asobo\Common\Subtemplates\Handling_Subtemplates.xml
Source XML
<ModelBehaviors>
<!-- Do not call directly unless facing a specific case, prefer using HANDLING_Yoke_Hideable_Template instead -->
<Template Name="ASOBO_HANDLING_Yoke_Hider_Template">
<Parameters Type="Default">
<ID>1</ID>
<MOUSERECT_DISABLED_WITH_MOTION_CONTROLLERS>True</MOUSERECT_DISABLED_WITH_MOTION_CONTROLLERS>
</Parameters>
<Parameters Type="Default">
<NODE_ID>HANDLING_YOKE_Hider_#ID#</NODE_ID>
</Parameters>
<Parameters Type="Default">
<TOOLTIP_TITLE>@TT_Package.YOKE_VISIBILITY_TITLE</TOOLTIP_TITLE>
<TOOLTIP_ENTRY_0>HANDLING_Yoke_Hider_#ID#</TOOLTIP_ENTRY_0>
</Parameters>
<!-- <Parameters Type="Override"> -->
<!-- <TOOLTIP_TITLE>#TOOLTIP_YOKE_VISIBILITY_TITLE#</TOOLTIP_TITLE> -->
<!-- <TOOLTIP_ENTRY_0>HANDLING_Yoke_Hider_#ID#</TOOLTIP_ENTRY_0> -->
<!-- </Parameters> -->
<Component ID="#NODE_ID#_Hider" Node="#NODE_ID#">
<UseInputEvent ID="HANDLING">
<HIDER_ID>#ID#</HIDER_ID>
</UseInputEvent>
<UseTemplate Name="ASOBO_GT_Interaction_LeftSingle_Code">
<LEFT_SINGLE_CODE>(>B:HANDLING_Yoke_Hider_#ID#_Toggle)</LEFT_SINGLE_CODE>
</UseTemplate>
</Component>
</Template>
<!-- Yoke that cannot be hidden -->
<!--
NODE_ID: Node that should be highlighted during checklist
optional:
CREATE_TWO_NODES: create both yoke nodes and there respective highlight
NODE_ID2: other Node that should be highlighted during checklist (ex: copilot yoke)
-->
<Template Name="ASOBO_HANDLING_Yoke_SubTemplate">
<DefaultTemplateParameters>
<Condition Check="CREATE_TWO_NODES">
<True>
<NODE_ID>HANDLING_Yoke_1</NODE_ID>
<NODE_ID2>HANDLING_Yoke_2</NODE_ID2>
</True>
<False>
<NODE_ID>HANDLING_Yoke_#ID#</NODE_ID>
</False>
</Condition>
<Condition Valid="AP_CAN_DRIVE_ANIMATION">
<True>
<ANIM_SIMVAR_X>YOKE X POSITION WITH AP</ANIM_SIMVAR_X>
<ANIM_SIMVAR_X_LINEAR>YOKE X POSITION WITH AP LINEAR</ANIM_SIMVAR_X_LINEAR>
<ANIM_SIMVAR_Y>YOKE Y POSITION WITH AP</ANIM_SIMVAR_Y>
</True>
<False>
<ANIM_SIMVAR_X>YOKE X POSITION</ANIM_SIMVAR_X>
<ANIM_SIMVAR_X_LINEAR>YOKE X POSITION LINEAR</ANIM_SIMVAR_X_LINEAR>
<ANIM_SIMVAR_Y>YOKE Y POSITION</ANIM_SIMVAR_Y>
</False>
</Condition>
<ANIM_NAME_YOKE_X>HANDLING_YOKE_Lever_StickLR</ANIM_NAME_YOKE_X>
<ANIM_NAME_YOKE_Y>HANDLING_YOKE_Lever_StickForeAft</ANIM_NAME_YOKE_Y>
<PART_ID>HANDLING_Yoke</PART_ID>
<ANIM_LENGTH>200</ANIM_LENGTH>
<!-- [-100, 100] -->
<ANIM_SIMVAR_BIAS>100</ANIM_SIMVAR_BIAS>
<!-- [-100, 100] + 100 => [0, 200] -->
</DefaultTemplateParameters>
<Component ID="#NODE_ID#_#ID#" Node="#NODE_ID#">
<UseTemplate Name="ASOBO_GT_Anim_Code">
<ANIM_NAME>#ANIM_NAME_YOKE_X#</ANIM_NAME>
<ANIM_CODE>(E:IS IN VR, Bool) if{ (A:#ANIM_SIMVAR_X_LINEAR#, percent over 100) } els{ (A:#ANIM_SIMVAR_X#, percent over 100) } #ANIM_LENGTH# 0.5 * * #ANIM_SIMVAR_BIAS# +</ANIM_CODE>
</UseTemplate>
<UseTemplate Name="ASOBO_GT_Anim_Sim">
<ANIM_NAME>#ANIM_NAME_YOKE_Y#</ANIM_NAME>
<ANIM_SIMVAR>#ANIM_SIMVAR_Y#</ANIM_SIMVAR>
<ANIM_SIMVAR_UNITS>percent</ANIM_SIMVAR_UNITS>
</UseTemplate>
</Component>
<Condition Check="CREATE_TWO_NODES">
<UseTemplate Name="ASOBO_GT_ComponentWith_PART_ID">
<NODE_ID>#NODE_ID2#</NODE_ID>
</UseTemplate>
</Condition>
</Template>
<Template Name="ASOBO_HANDLING_Yoke_Hideable_SubTemplate">
<DefaultTemplateParameters>
<NODE_ID>HANDLING_YOKE_Hideable_#ID#</NODE_ID>
<YOKE_HIDER_NODE_ID>HANDLING_YOKE_Hider_#ID#</YOKE_HIDER_NODE_ID>
<YOKE_NODE_ID>HANDLING_Yoke_#ID#</YOKE_NODE_ID>
<TOOLTIPID>TT:COCKPIT.TOOLTIPS.YOKE_VISIBILITY</TOOLTIPID>
</DefaultTemplateParameters>
<Component ID="#NODE_ID#_VisibilityNode" Node="#NODE_ID#">
<UseTemplate Name="ASOBO_GT_Visibility_Code">
<VISIBILITY_CODE>(L:XMLVAR_YokeHidden#ID#) !</VISIBILITY_CODE>
</UseTemplate>
</Component>
<Condition Check="ONLY_DECORATIVE">
<False>
<UseTemplate Name="ASOBO_HANDLING_Yoke_Hider_Template">
<NODE_ID>#YOKE_HIDER_NODE_ID#</NODE_ID>
</UseTemplate>
<Condition Check="ONLY_HIDEABLE">
<True>
<UseTemplate Name="ASOBO_GT_ComponentWith_PART_ID">
<NODE_ID>#YOKE_NODE_ID#</NODE_ID>
<PART_ID>HANDLING_YOKE</PART_ID>
</UseTemplate>
</True>
<False>
<UseTemplate Name="ASOBO_HANDLING_Yoke_Template">
<NODE_ID>#YOKE_NODE_ID#</NODE_ID>
</UseTemplate>
</False>
</Condition>
</False>
</Condition>
</Template>
<Template Name="ASOBO_HANDLING_Joystick_YawPitch_SubTemplate">
<Parameters Type="Default">
<NODE_ID>HANDLING_Joystick_YawPitch_#ID#</NODE_ID>
<ANIM_NAME_L_R>HANDLING_Joystick_YawPitch_L_R_#ID#</ANIM_NAME_L_R>
<ANIM_NAME_DN_UP>HANDLING_Joystick_YawPitch_DN_UP_#ID#</ANIM_NAME_DN_UP>
<INPUT_EVENT_ID_SOURCE>HANDLING</INPUT_EVENT_ID_SOURCE>
</Parameters>
<Parameters Type="Default">
<VAR_NAME>#INPUT_EVENT_ID_SOURCE#_Joystick_#ID#_Interacting</VAR_NAME>
<TT_DESCRIPTION_ID_PAN_X>@TT_Package.YOKE_PUSH_NOSE_ACTION</TT_DESCRIPTION_ID_PAN_X>
<TT_DESCRIPTION_ID_PAN_Y>@TT_Package.YOKE_PUSH_NOSE_ACTION</TT_DESCRIPTION_ID_PAN_Y>
<TT_DESCRIPTION_ID_DISENGAGE>@TT_Package.GT_STATE_DISENGAGE</TT_DESCRIPTION_ID_DISENGAGE>
<TOOLTIP_TITLE_EXTERNAL>@TT_Package.YOKE_PUSH_NOSE_TITLE</TOOLTIP_TITLE_EXTERNAL>
</Parameters>
<Parameters Type="Override">
<KNOB_X_ID>Yaw_Pitch_X</KNOB_X_ID>
<KNOB_Y_ID>Yaw_Pitch_Y</KNOB_Y_ID>
<BTN_DISENGAGE_ID>Yaw_Pitch_AP_Disengage</BTN_DISENGAGE_ID>
</Parameters>
<Parameters Type="Override">
<JOYSTICK_X_CODE_LEFT>1 (>B:#INPUT_EVENT_ID_SOURCE#_#KNOB_X_ID#_Left)</JOYSTICK_X_CODE_LEFT>
<JOYSTICK_X_CODE_RIGHT>1 (>B:#INPUT_EVENT_ID_SOURCE#_#KNOB_X_ID#_Right)</JOYSTICK_X_CODE_RIGHT>
<JOYSTICK_Y_CODE_DOWN>1 (>B:#INPUT_EVENT_ID_SOURCE#_#KNOB_Y_ID#_Up)</JOYSTICK_Y_CODE_DOWN>
<JOYSTICK_Y_CODE_UP>1 (>B:#INPUT_EVENT_ID_SOURCE#_#KNOB_Y_ID#_Down)</JOYSTICK_Y_CODE_UP>
<LEFT_SINGLE_CODE_DEFAULT_IM>1 (>B:#INPUT_EVENT_ID_SOURCE#_#BTN_DISENGAGE_ID#_Set)</LEFT_SINGLE_CODE_DEFAULT_IM>
<LEFT_RELEASE_CODE_DEFAULT_IM>0 (>B:#INPUT_EVENT_ID_SOURCE#_#BTN_DISENGAGE_ID#_Set)</LEFT_RELEASE_CODE_DEFAULT_IM>
<LEFT_SINGLE_CODE_DRAG_IM>1 (>B:#INPUT_EVENT_ID_SOURCE#_#BTN_DISENGAGE_ID#_Set)</LEFT_SINGLE_CODE_DRAG_IM>
<LEFT_RELEASE_CODE_DRAG_IM>0 (>B:#INPUT_EVENT_ID_SOURCE#_#BTN_DISENGAGE_ID#_Set)</LEFT_RELEASE_CODE_DRAG_IM>
</Parameters>
<Component ID="#NODE_ID#" Node="#NODE_ID#">
<Parameters Type="Override">
<TOOLTIP_TITLE>#TOOLTIP_TITLE_EXTERNAL#</TOOLTIP_TITLE>
<TOOLTIP_ENTRY_0>#INPUT_EVENT_ID_SOURCE#_#KNOB_X_ID#</TOOLTIP_ENTRY_0>
<TOOLTIP_ENTRY_1>#INPUT_EVENT_ID_SOURCE#_#KNOB_Y_ID#</TOOLTIP_ENTRY_1>
</Parameters>
<UseInputEvent ID="HANDLING">
<BTN_ID>#BTN_DISENGAGE_ID#</BTN_ID>
<TT_DESCRIPTION_ID>#TT_DESCRIPTION_ID_DISENGAGE#</TT_DESCRIPTION_ID>
<BINDING_INC_0>Push</BINDING_INC_0>
<BINDING_INC_0_PARAM_0>1</BINDING_INC_0_PARAM_0>
<BINDING_DEC_0>Release</BINDING_DEC_0>
<BINDING_DEC_0_PARAM_0>0</BINDING_DEC_0_PARAM_0>
<SET_STATE_EXTERNAL>(A:AUTOPILOT DISENGAGED, Bool) != if{ p0 (>K:AUTOPILOT_DISENGAGE_SET) }</SET_STATE_EXTERNAL>
<ANIM_EXTERNAL>True</ANIM_EXTERNAL>
</UseInputEvent>
<UseInputEvent ID="HANDLING">
<KNOB_ID>#KNOB_X_ID#</KNOB_ID>
<TT_DESCRIPTION_ID>#TT_DESCRIPTION_ID_PAN_X#</TT_DESCRIPTION_ID>
<TT_ICON>MOVE_AXIS</TT_ICON>
<SET_STATE_EXTERNAL>0 > if{ (>K:RUDDER_TRIM_RIGHT) } els{ (>K:RUDDER_TRIM_LEFT) }</SET_STATE_EXTERNAL>
<BINDING_INC_0>Right</BINDING_INC_0>
<BINDING_INC_0_PARAM_0>1</BINDING_INC_0_PARAM_0>
<BINDING_DEC_0>Left</BINDING_DEC_0>
<BINDING_DEC_0_PARAM_0>1</BINDING_DEC_0_PARAM_0>
<NO_ANIM_VAR_UPDATE>True</NO_ANIM_VAR_UPDATE>
<GET_TT_VALUE_STATE>(A:RUDDER TRIM, degrees)</GET_TT_VALUE_STATE>
<FORMAT_VALUE>'%.1f°' @sprintf</FORMAT_VALUE>
</UseInputEvent>
<UseInputEvent ID="HANDLING">
<KNOB_ID>#KNOB_Y_ID#</KNOB_ID>
<TT_DESCRIPTION_ID>#TT_DESCRIPTION_ID_PAN_X#</TT_DESCRIPTION_ID>
<TT_ICON>MOVE_AXIS</TT_ICON>
<TT_INTERACTION>PRIMARY_DOWN+Y_AXIS</TT_INTERACTION>
<TT_INTERACTION_LOCKABLE>Y_AXIS</TT_INTERACTION_LOCKABLE>
<SET_STATE_EXTERNAL>0 > if{ (>K:ELEV_TRIM_UP) } els{ (>K:ELEV_TRIM_DN) } (A:AUTOPILOT DISENGAGED, Bool) ! if{ 1 (>K:AUTOPILOT_DISENGAGE_SET) }</SET_STATE_EXTERNAL>
<BINDING_INC_0>Up</BINDING_INC_0>
<BINDING_INC_0_PARAM_0>1</BINDING_INC_0_PARAM_0>
<BINDING_DEC_0>Down</BINDING_DEC_0>
<BINDING_DEC_0_PARAM_0>1</BINDING_DEC_0_PARAM_0>
<NO_ANIM_VAR_UPDATE>True</NO_ANIM_VAR_UPDATE>
<GET_TT_VALUE_STATE>(A:ELEVATOR TRIM POSITION, degrees)</GET_TT_VALUE_STATE>
<FORMAT_VALUE>'%.1f°' @sprintf</FORMAT_VALUE>
</UseInputEvent>
<UseTemplate Name="ASOBO_GT_Joystick_Interaction_Knob">
<!-- Spacial case for DRAG_IM to condense inputs to only one node -->
<JOYSTICK_INTERACTION>PAN_ONLY</JOYSTICK_INTERACTION>
<UPDATE_FREQUENCY>20</UPDATE_FREQUENCY>
<COUNT>36</COUNT>
<THRESHOLD_X_INPUT>0.1</THRESHOLD_X_INPUT>
<THRESHOLD_X_MOUSE>0.01</THRESHOLD_X_MOUSE>
<THRESHOLD_Y_INPUT>0.1</THRESHOLD_Y_INPUT>
<THRESHOLD_Y_MOUSE>0.01</THRESHOLD_Y_MOUSE>
<TIMEOUT_DELAY_RESET_AXIS>0.25</TIMEOUT_DELAY_RESET_AXIS>
<IM_DRAG_ADDITIONAL_EVENT_HANDLING/>
<WWISE_JOYSTICK_EVENT_L>handling_yawpitch_joystick</WWISE_JOYSTICK_EVENT_L>
<WWISE_JOYSTICK_EVENT_R>handling_yawpitch_joystick</WWISE_JOYSTICK_EVENT_R >
<WWISE_JOYSTICK_EVENT_UP>handling_yawpitch_joystick</WWISE_JOYSTICK_EVENT_UP>
<WWISE_JOYSTICK_EVENT_DN>handling_yawpitch_joystick</WWISE_JOYSTICK_EVENT_DN>
</UseTemplate>
</Component>
</Template>
<Template Name="ASOBO_HANDLING_Timer_SubTemplate">
<Parameters Type="Default">
<NODE_ID>HANDLING_#INTERACTION_TYPE#_Timer</NODE_ID>
<ANIM_NAME>HANDLING_#INTERACTION_TYPE#_Timer</ANIM_NAME>
<WWISE_EVENT_1>yoke_push_button_on</WWISE_EVENT_1>
<WWISE_EVENT_2>yoke_push_button_off</WWISE_EVENT_2>
<TOOLTIP_TITLE>@TT_Package.YOKE_PUSH_TIMER_TITLE</TOOLTIP_TITLE>
<TT_DESCRIPTION_ID>@TT_Package.YOKE_PUSH_TIMER_ACTION</TT_DESCRIPTION_ID>
</Parameters>
<Parameters Type="Override">
<BTN_ID>Timer_Button</BTN_ID>
</Parameters>
<Component ID="#NODE_ID#" Node="#NODE_ID#">
<UseInputEvent ID="HANDLING">
<SET_STATE_EXTERNAL>if{ (>H:AS1000_PFD_1_TIMER) }</SET_STATE_EXTERNAL>
<BINDING_INC_0>Push</BINDING_INC_0>
<BINDING_INC_0_PARAM_0>1</BINDING_INC_0_PARAM_0>
</UseInputEvent>
<UseTemplate Name="ASOBO_GT_Push_Button">
<TOOLTIP_ENTRY_0>HANDLING_#BTN_ID#</TOOLTIP_ENTRY_0>
<LEFT_SINGLE_CODE>(>B:HANDLING_#BTN_ID#_Push)</LEFT_SINGLE_CODE>
</UseTemplate>
</Component>
</Template>
<Template Name="ASOBO_HANDLING_StormClear_SubTemplate">
<Parameters Type="Default">
<NODE_ID>HANDLING_#INTERACTION_TYPE#_StormClear</NODE_ID>
<ANIM_NAME>HANDLING_#INTERACTION_TYPE#_StormClear</ANIM_NAME>
<WWISE_EVENT_1>yoke_push_button_on</WWISE_EVENT_1>
<WWISE_EVENT_2>yoke_push_button_off</WWISE_EVENT_2>
</Parameters>
<Component ID="#NODE_ID#" Node="#NODE_ID#">
<UseTemplate Name="ASOBO_GT_Push_Button">
<LEFT_SINGLE_CODE/>
<TOOLTIPID>TT:COCKPIT.TOOLTIPS.INOP</TOOLTIPID>
</UseTemplate>
</Component>
</Template>
<Template Name="ASOBO_HANDLING_CWS_SubTemplate">
<Parameters Type="Default">
<NODE_ID>HANDLING_#INTERACTION_TYPE#_CWS</NODE_ID>
<ANIM_NAME>HANDLING_#INTERACTION_TYPE#_CWS</ANIM_NAME>
<WWISE_EVENT_1>yoke_push_button_on</WWISE_EVENT_1>
<WWISE_EVENT_2>yoke_push_button_off</WWISE_EVENT_2>
</Parameters>
<Component ID="#NODE_ID#" Node="#NODE_ID#">
<UseTemplate Name="ASOBO_GT_Push_Button">
<LEFT_SINGLE_CODE/>
<TOOLTIPID>TT:COCKPIT.TOOLTIPS.INOP</TOOLTIPID>
</UseTemplate>
</Component>
</Template>
<Template Name="ASOBO_HANDLING_Ident_SubTemplate">
<Parameters Type="Default">
<NODE_ID>HANDLING_#INTERACTION_TYPE#_Ident</NODE_ID>
<ANIM_NAME>HANDLING_#INTERACTION_TYPE#_Ident</ANIM_NAME>
<WWISE_EVENT_1>yoke_push_button_on</WWISE_EVENT_1>
<WWISE_EVENT_2>yoke_push_button_off</WWISE_EVENT_2>
<TOOLTIP_TITLE>@TT_Package.YOKE_PUSH_IDENT_TITLE</TOOLTIP_TITLE>
<TT_DESCRIPTION_ID>@TT_Package.YOKE_PUSH_IDENT_ACTION</TT_DESCRIPTION_ID>
</Parameters>
<Parameters Type="Override">
<BTN_ID>Radio_NAV#ID#_Swap</BTN_ID>
</Parameters>
<Component ID="#NODE_ID#" Node="#NODE_ID#">
<UseInputEvent ID="HANDLING">
<SET_STATE_EXTERNAL>if{ (>K:RADIO_VOR#ID#_IDENT_TOGGLE) }</SET_STATE_EXTERNAL>
<BINDING_INC_0>Push</BINDING_INC_0>
<BINDING_INC_0_PARAM_0>1</BINDING_INC_0_PARAM_0>
</UseInputEvent>
<UseTemplate Name="ASOBO_GT_Push_Button_Held">
<TOOLTIP_ENTRY_0>HANDLING_#BTN_ID#</TOOLTIP_ENTRY_0>
<LEFT_SINGLE_CODE>(>B:HANDLING_#BTN_ID#_Push)</LEFT_SINGLE_CODE>
</UseTemplate>
</Component>
</Template>
<Template Name="ASOBO_HANDLING_Swap_SubTemplate">
<Parameters Type="Default">
<NODE_ID>HANDLING_#INTERACTION_TYPE#_Swap</NODE_ID>
<ANIM_NAME>HANDLING_#INTERACTION_TYPE#_Swap</ANIM_NAME>
<WWISE_EVENT_1>yoke_push_button_on</WWISE_EVENT_1>
<WWISE_EVENT_2>yoke_push_button_off</WWISE_EVENT_2>
<TOOLTIP_TITLE>@TT_Package.AIRLINER_COM_PUSH_SWAP_TITLE</TOOLTIP_TITLE>
<TT_DESCRIPTION_ID>@TT_Package.AIRLINER_COM_PUSH_SWAP_ACTION</TT_DESCRIPTION_ID>
</Parameters>
<Parameters Type="Override">
<BTN_ID>Radio_COM#ID#_Swap</BTN_ID>
</Parameters>
<Component ID="#NODE_ID#" Node="#NODE_ID#">
<UseInputEvent ID="HANDLING">
<SET_STATE_EXTERNAL>if{ (>K:COM#ID#_RADIO_SWAP) }</SET_STATE_EXTERNAL>
<BINDING_INC_0>Push</BINDING_INC_0>
<BINDING_INC_0_PARAM_0>1</BINDING_INC_0_PARAM_0>
</UseInputEvent>
<UseTemplate Name="ASOBO_GT_Push_Button_Held">
<TOOLTIP_ENTRY_0>HANDLING_#BTN_ID#</TOOLTIP_ENTRY_0>
<LEFT_SINGLE_CODE>(>B:HANDLING_#BTN_ID#_Push)</LEFT_SINGLE_CODE>
</UseTemplate>
</Component>
</Template>
<Template Name="ASOBO_HANDLING_AntiSkid_SubTemplate">
<Parameters Type="Default">
<NODE_ID>HANDLING_#INTERACTION_TYPE#_AntiSkid</NODE_ID>
<ANIM_NAME>HANDLING_#INTERACTION_TYPE#_AntiSkid</ANIM_NAME>
<WWISE_EVENT_1>antiskid_switch_on</WWISE_EVENT_1>
<WWISE_EVENT_2>antiskid_switch_off</WWISE_EVENT_2>
<ON_ANTI_SKID_STATE_CHANGED>(A:ANTISKID BRAKES ACTIVE, Bool) ! if{ 0 (>L:HANDLING_Autobrakes_Position) }</ON_ANTI_SKID_STATE_CHANGED>
<TOOLTIP_TITLE>@TT_Package.LANDING_GEAR_SWITCH_AUTOBKR_ASKID_TITLE</TOOLTIP_TITLE>
<TT_DESCRIPTION_ID>@TT_Package.LANDING_GEAR_SWITCH_AUTOBKR_ASKID_ACTION</TT_DESCRIPTION_ID>
</Parameters>
<Parameters Type="Override">
<BTN_ID>Anti_Skid</BTN_ID>
</Parameters>
<Component ID="#NODE_ID#" Node="#NODE_ID#">
<UseInputEvent ID="HANDLING">
<SET_STATE_EXTERNAL>p0 (A:ANTISKID BRAKES ACTIVE, Bool) != if{ (>K:ANTISKID_BRAKES_TOGGLE) } #ON_ANTI_SKID_STATE_CHANGED#</SET_STATE_EXTERNAL>
<GET_STATE_EXTERNAL>(A:ANTISKID BRAKES ACTIVE, Bool) sp0</GET_STATE_EXTERNAL>
<SIM_STATE_IS_ON_EXTERNAL>l0</SIM_STATE_IS_ON_EXTERNAL>
</UseInputEvent>
<UseTemplate Name="ASOBO_GT_Switch_Code">
<TOOLTIP_ENTRY_0>HANDLING_#BTN_ID#</TOOLTIP_ENTRY_0>
<LEFT_SINGLE_CODE>(>B:HANDLING_#BTN_ID#_Toggle)</LEFT_SINGLE_CODE>
<ANIM_CODE>(B:HANDLING_#BTN_ID#, Bool) 100 *</ANIM_CODE>
</UseTemplate>
</Component>
</Template>
<Template Name="ASOBO_HANDLING_GLimiter_SubTemplate">
<Parameters Type="Default">
<NODE_ID>HANDLING_#INTERACTION_TYPE#_GLimiter</NODE_ID>
<ANIM_NAME>HANDLING_#INTERACTION_TYPE#_GLimiter</ANIM_NAME>
<TOOLTIP_TITLE>@TT_Package.GLIMITER_SWITCH_TITLE</TOOLTIP_TITLE>
<TT_DESCRIPTION_ID>@TT_Package.GLIMITER_SWITCH_ACTION</TT_DESCRIPTION_ID>
<OVERRIDE_CONDITIONS>p0 1 ==</OVERRIDE_CONDITIONS>
<ADDITIONAL_EFFECTS/>
</Parameters>
<Parameters Type="Override">
<Switch Param="TYPE">
<Case Value="AS04F">
<OVERRIDE_CONDITIONS>#OVERRIDE_CONDITIONS# (A:YOKE Y POSITION, Percent over 100) 0.8 > and</OVERRIDE_CONDITIONS>
<ADDITIONAL_EFFECTS>p0 (>K:AUTOPILOT_DISENGAGE_SET) 0 (>K:NOSE_WHEEL_STEERING_LIMIT_SET)</ADDITIONAL_EFFECTS>
</Case>
</Switch>
</Parameters>
<Parameters Type="Override">
<BTN_ID>GLimiter</BTN_ID>
<Switch Param="TYPE">
<Case Value="AS04F">
<SET_STATE_EXTERNAL>#OVERRIDE_CONDITIONS# if{ 2 } els{ 1 } (>K:G_LIMITER_SET) #ADDITIONAL_EFFECTS#</SET_STATE_EXTERNAL>
<GET_STATE_EXTERNAL>(A:G LIMITER SETTING, Enum) 2 == sp0</GET_STATE_EXTERNAL>
</Case>
</Switch>
</Parameters>
<Component ID="#NODE_ID#" Node="#NODE_ID#">
<Switch Param="TYPE">
<Case Value="AS04F">
<UseTemplate Name="ASOBO_GT_Update">
<FREQUENCY>2</FREQUENCY>
<UPDATE_CODE>
(B:HANDLING_#BTN_ID#) (A:YOKE Y POSITION, Percent over 100) abs 0.1 < and if{
1 (>K:G_LIMITER_SET)
0 (>K:AUTOPILOT_DISENGAGE_SET)
0 (>B:HANDLING_#BTN_ID#)
}
</UPDATE_CODE>
</UseTemplate>
</Case>
</Switch>
<UseTemplate Name="ASOBO_HANDLING_Base_Template">
<IE_NAME>#BTN_ID#</IE_NAME>
<CREATE_COMPONENT>False</CREATE_COMPONENT>
<SIM_STATE_IS_ON_EXTERNAL>l0</SIM_STATE_IS_ON_EXTERNAL>
<BINDING_SET_0>Toggle</BINDING_SET_0>
<BINDING_SET_0_PARAM_0>(B:HANDLING_#BTN_ID#) !</BINDING_SET_0_PARAM_0>
<BINDING_SET_0_PARAM_0_IS_DYNAMIC>True</BINDING_SET_0_PARAM_0_IS_DYNAMIC>
<BINDING_SET_0_EVENT_ID>G_LIMITER_TOGGLE</BINDING_SET_0_EVENT_ID>
<BINDING_SET_1>KeySet</BINDING_SET_1>
<BINDING_SET_1_PARAM_0>p0 0 !=</BINDING_SET_1_PARAM_0>
<BINDING_SET_1_PARAM_0_IS_DYNAMIC>True</BINDING_SET_1_PARAM_0_IS_DYNAMIC>
<BINDING_SET_1_EVENT_ID>G_LIMITER_SET</BINDING_SET_1_EVENT_ID>
<BINDING_SET_2>On</BINDING_SET_2>
<BINDING_SET_2_PARAM_0>1</BINDING_SET_2_PARAM_0>
<BINDING_SET_2_EVENT_ID>G_LIMITER_ON</BINDING_SET_2_EVENT_ID>
<BINDING_SET_3>Off</BINDING_SET_3>
<BINDING_SET_3_PARAM_0>0</BINDING_SET_3_PARAM_0>
<BINDING_SET_3_EVENT_ID>G_LIMITER_OFF</BINDING_SET_3_EVENT_ID>
<SIMVAR_TO_WATCH_0>G LIMITER SETTING</SIMVAR_TO_WATCH_0>
</UseTemplate>
</Component>
</Template>
<Template Name="ASOBO_HANDLING_Steering_Tiller_SubTemplate">
<DefaultTemplateParameters>
<NODE_ID>HANDLING_Steering_Tiller_#ID#</NODE_ID>
<ANIM_NAME>HANDLING_Steering_Tiller_#ID#</ANIM_NAME>
</DefaultTemplateParameters>
<Component ID="#NODE_ID#" Node="#NODE_ID#">
<UseTemplate Name="ASOBO_GT_Anim_Code">
<ANIM_CODE>
(A:SIM ON GROUND, Bool) if{
(A:GEAR STEER ANGLE PCT, Percent) 100 +
} els{
(A:STEER INPUT CONTROL, Percent) 100 +
}
</ANIM_CODE>
<ANIM_LENGTH>200</ANIM_LENGTH>
</UseTemplate>
</Component>
</Template>
<Template Name="ASOBO_HANDLING_RudderPedals_SubTemplate">
<DefaultTemplateParameters>
<ANIM_NAME>HANDLING_RudderPedals</ANIM_NAME>
<ANIM_LAG>400</ANIM_LAG>
<Switch Param="RUDDERPEDALS_TYPE">
<Case Value="SPLITTED"><!-- Separate rudders L & R for pilot & copilot -->
<Condition Valid="DIFFERENTIATE_BRAKE_ANIM_L_R">
<True>
<NODE_ID>HANDLING_RudderPedals_Left_1_1</NODE_ID><!-- Any valid node -->
<PREFIX_LEFT_PEDALS>HANDLING_RudderPedals_Left_</PREFIX_LEFT_PEDALS>
<SUFFIX_LEFT_PEDALS>_1</SUFFIX_LEFT_PEDALS>
<PREFIX_RIGHT_PEDALS>HANDLING_RudderPedals_Right_</PREFIX_RIGHT_PEDALS>
<SUFFIX_RIGHT_PEDALS>_2</SUFFIX_RIGHT_PEDALS>
</True>
<False>
<NODE_ID>HANDLING_RudderPedals_#ID#_1</NODE_ID>
<PART_ID>HANDLING_RudderPedals</PART_ID>
<NODE_ID2>HANDLING_RudderPedals_#ID#_2</NODE_ID2>
</False>
</Condition>
</Case>
<Case Value="MERGED"><!-- Each rudder pedal node is shared for pilot & copilot (L & R) -->
<NODE_ID>HANDLING_RudderPedals_1</NODE_ID><!-- any valid node -->
<NODE_ID_L_BRAKE>HANDLING_RudderPedals_1_Brake</NODE_ID_L_BRAKE>
<NODE_ID_L_RUDDER>HANDLING_RudderPedals_1_Rudder</NODE_ID_L_RUDDER>
<NODE_ID_R_BRAKE>HANDLING_RudderPedals_2_Brake</NODE_ID_R_BRAKE>
<NODE_ID_R_RUDDER>HANDLING_RudderPedals_2_Rudder</NODE_ID_R_RUDDER>
<PART_ID_BRAKES>HANDLING_RudderPedals_Brake</PART_ID_BRAKES>
<PART_ID_RUDDERS>HANDLING_RudderPedals_Rudder</PART_ID_RUDDERS>
<USE_BRAKE>True</USE_BRAKE>
</Case>
<Case Value="MIXED"><!-- Each rudder pedal root node is shared for pilot & copilot (L & R) but brakes are splitted -->
<NODE_ID>HANDLING_RudderPedals_1</NODE_ID><!-- any valid node -->
<NODE_ID_L_BRAKE_1>HANDLING_RudderPedals_1_1_Brake</NODE_ID_L_BRAKE_1>
<NODE_ID_L_BRAKE_2>HANDLING_RudderPedals_2_1_Brake</NODE_ID_L_BRAKE_2>
<NODE_ID_R_BRAKE_1>HANDLING_RudderPedals_1_2_Brake</NODE_ID_R_BRAKE_1>
<NODE_ID_R_BRAKE_2>HANDLING_RudderPedals_2_2_Brake</NODE_ID_R_BRAKE_2>
<NODE_ID_L_RUDDER>HANDLING_RudderPedals_1</NODE_ID_L_RUDDER>
<NODE_ID_R_RUDDER>HANDLING_RudderPedals_2</NODE_ID_R_RUDDER>
<PART_ID_BRAKES>HANDLING_RudderPedals</PART_ID_BRAKES>
<PART_ID_RUDDERS>HANDLING_RudderPedals</PART_ID_RUDDERS>
<DIFFERENTIATE_BRAKE_ANIM_L_R>True</DIFFERENTIATE_BRAKE_ANIM_L_R>
<USE_BRAKE>True</USE_BRAKE>
</Case>
<Default>
<PART_ID>HANDLING_RudderPedals</PART_ID>
<NODE_ID>HANDLING_RudderPedals_#ID#</NODE_ID>
</Default>
</Switch>
</DefaultTemplateParameters>
<OverrideTemplateParameters>
<Switch Param="RUDDERPEDALS_TYPE">
<Case Value="SPLITTED">
<Condition Valid="DIFFERENTIATE_BRAKE_ANIM_L_R">
<True>
<PART_ID>HANDLING_RudderPedals</PART_ID>
<EXIT_TEMPLATE>ASOBO_GT_Highlight_Template</EXIT_TEMPLATE>
<MAX_ID>2</MAX_ID>
<PARAM1>HIGHLIGHT_NODE_ID</PARAM1>
</True>
</Condition>
</Case>
</Switch>
</OverrideTemplateParameters>
<Switch Param="RUDDERPEDALS_TYPE">
<Case Value="SPLITTED">
<Condition Valid="DIFFERENTIATE_BRAKE_ANIM_L_R">
<True>
<Component ID="HANDLING_RudderPedals_Highlights">
<!-- highlights all four pedals -->
<UseTemplate Name="ASOBO_GT_Helper_Recursive_ID">
<ID>1</ID>
<!-- VV Recursive parameters VV -->
<PARAM1_PREFIX>#PREFIX_LEFT_PEDALS#</PARAM1_PREFIX>
<PARAM1_SUFFIX>#SUFFIX_LEFT_PEDALS#</PARAM1_SUFFIX>
</UseTemplate>
<UseTemplate Name="ASOBO_GT_Helper_Recursive_ID">
<ID>2</ID>
<!-- VV Recursive parameters VV -->
<PARAM1_PREFIX>#PREFIX_RIGHT_PEDALS#</PARAM1_PREFIX>
<PARAM1_SUFFIX>#SUFFIX_RIGHT_PEDALS#</PARAM1_SUFFIX>
</UseTemplate>
</Component>
</True>
<False>
<UseTemplate Name="ASOBO_GT_ComponentWith_PART_ID">
<NODE_ID>#NODE_ID2#</NODE_ID>
<ID>2</ID>
</UseTemplate>
</False>
</Condition>
</Case>
<Case Value="MERGED"><!-- Each rudder pedal node is shared for pilot & copilot (L & R) -->
<Condition Valid="NO_BRAKES_HIGHLIGHT">
<False>
<UseTemplate Name="ASOBO_GT_Highlight_Template">
<HIGHLIGHT_NODE_ID>#NODE_ID_L_BRAKE#</HIGHLIGHT_NODE_ID>
<PART_ID>#PART_ID_BRAKES#</PART_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_GT_Highlight_Template">
<HIGHLIGHT_NODE_ID>#NODE_ID_R_BRAKE#</HIGHLIGHT_NODE_ID>
<PART_ID>#PART_ID_BRAKES#</PART_ID>
</UseTemplate>
</False>
</Condition>
<UseTemplate Name="ASOBO_GT_Highlight_Template">
<HIGHLIGHT_NODE_ID>#NODE_ID_L_RUDDER#</HIGHLIGHT_NODE_ID>
<PART_ID>#PART_ID_RUDDERS#</PART_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_GT_Highlight_Template">
<HIGHLIGHT_NODE_ID>#NODE_ID_R_RUDDER#</HIGHLIGHT_NODE_ID>
<PART_ID>#PART_ID_RUDDERS#</PART_ID>
</UseTemplate>
</Case>
<Case Value="MIXED">
<Condition Valid="NO_BRAKES_HIGHLIGHT">
<False>
<UseTemplate Name="ASOBO_GT_Highlight_Template">
<HIGHLIGHT_NODE_ID>#NODE_ID_L_BRAKE_1#</HIGHLIGHT_NODE_ID>
<PART_ID>#PART_ID_BRAKES#</PART_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_GT_Highlight_Template">
<HIGHLIGHT_NODE_ID>#NODE_ID_L_BRAKE_2#</HIGHLIGHT_NODE_ID>
<PART_ID>#PART_ID_BRAKES#</PART_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_GT_Highlight_Template">
<HIGHLIGHT_NODE_ID>#NODE_ID_R_BRAKE_1#</HIGHLIGHT_NODE_ID>
<PART_ID>#PART_ID_BRAKES#</PART_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_GT_Highlight_Template">
<HIGHLIGHT_NODE_ID>#NODE_ID_R_BRAKE_2#</HIGHLIGHT_NODE_ID>
<PART_ID>#PART_ID_BRAKES#</PART_ID>
</UseTemplate>
</False>
</Condition>
<UseTemplate Name="ASOBO_GT_Highlight_Template">
<HIGHLIGHT_NODE_ID>#NODE_ID_L_RUDDER#</HIGHLIGHT_NODE_ID>
<PART_ID>#PART_ID_RUDDERS#</PART_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_GT_Highlight_Template">
<HIGHLIGHT_NODE_ID>#NODE_ID_R_RUDDER#</HIGHLIGHT_NODE_ID>
<PART_ID>#PART_ID_RUDDERS#</PART_ID>
</UseTemplate>
</Case>
</Switch>
<Condition Check="DONT_CREATE_ANIMATION">
<True>
<UseTemplate Name="ASOBO_GT_ComponentWith_PART_ID">
<ID>1</ID>
</UseTemplate>
</True>
<False>
<Component ID="#NODE_ID#" Node="#NODE_ID#">
<DefaultTemplateParameters>
<ANIM_SIMVAR>RUDDER PEDAL POSITION</ANIM_SIMVAR>
<Condition Valid="USE_BRAKE">
<Condition Valid="DIFFERENTIATE_BRAKE_ANIM_L_R">
<True>
<BRAKE_ANIM_NAME_L>HANDLING_RudderPedals_Brake_L</BRAKE_ANIM_NAME_L>
<BRAKE_ANIM_NAME_R>HANDLING_RudderPedals_Brake_R</BRAKE_ANIM_NAME_R>
</True>
<False>
<BRAKE_ANIM_NAME>HANDLING_RudderPedals_Brake</BRAKE_ANIM_NAME>
</False>
</Condition>
</Condition>
</DefaultTemplateParameters>
<OverrideTemplateParameters>
<Condition Valid="NO_PART_ID_ON_ANIM_NODE">
<PART_ID></PART_ID>
</Condition>
</OverrideTemplateParameters>
<UseTemplate Name="ASOBO_GT_Anim_Sim">
<ID>1</ID>
<ANIM_LENGTH>200</ANIM_LENGTH>
<ANIM_SIMVAR_UNITS>percent</ANIM_SIMVAR_UNITS>
<!-- [-100, 100] -->
<ANIM_SIMVAR_BIAS>100</ANIM_SIMVAR_BIAS>
<!-- [-100, 100] + 100 => [0, 200] -->
</UseTemplate>
<Condition Valid="USE_BRAKE">
<UseTemplate Name="ASOBO_HANDLING_RudderPedals_Brake_Template">
<Condition Valid="DIFFERENTIATE_BRAKE_ANIM_L_R">
<True>
<ANIM_NAME_L>#BRAKE_ANIM_NAME_L#</ANIM_NAME_L>
<ANIM_NAME_R>#BRAKE_ANIM_NAME_R#</ANIM_NAME_R>
</True>
<False>
<ANIM_NAME>#BRAKE_ANIM_NAME#</ANIM_NAME>
</False>
</Condition>
</UseTemplate>
</Condition>
</Component>
</False>
</Condition>
</Template>
<!--
With default use case, you can set
TARGET_ANGLE_DEGREE: will light up when flaps reach this degree (default 0)
VALUE_RANGE: increase degree range for degree lighting (default 0.1)
-->
<Template Name="ASOBO_HANDLING_Light_Flaps_SubTemplate">
<Parameters Type="Default">
<NODE_ID>HANDLING_Light_Flaps_#ID#</NODE_ID>
<Switch Param="TYPE">
<Case Value="ALWAYS_ONE_LIT">
<ADJUSTED_ID_FLAP Process="Int">#ID# 0 max #MAX_FLAPS_INDEX# min</ADJUSTED_ID_FLAP>
<FLAPS_INDEX_COUNT Process="Int">#MAX_FLAPS_INDEX# 1 +</FLAPS_INDEX_COUNT>
<ANGLE_DEGREE_1>0</ANGLE_DEGREE_1>
<ANGLE_DEGREE_2>15</ANGLE_DEGREE_2>
<ANGLE_DEGREE_3>30</ANGLE_DEGREE_3>
<ANGLE_DEGREE_4>35</ANGLE_DEGREE_4>
<ANGLE_DEGREE_5>42</ANGLE_DEGREE_5>
</Case>
<Default>
<TARGET_ANGLE_DEGREE>0</TARGET_ANGLE_DEGREE>
<VALUE_RANGE>0.1</VALUE_RANGE>
</Default>
</Switch>
</Parameters>
<Parameters Type="Override">
<Switch Param="TYPE">
<Case Value="ALWAYS_ONE_LIT">
<TARGET_ANGLE Process="Float">
#ANGLE_DEGREE_5# #ANGLE_DEGREE_4# #ANGLE_DEGREE_3# #ANGLE_DEGREE_2# #ANGLE_DEGREE_1# #FLAPS_INDEX_COUNT# #ADJUSTED_ID_FLAP# case
</TARGET_ANGLE>
</Case>
</Switch>
</Parameters>
<Parameters Type="Default">
<Switch Param="TYPE">
<Case Value="ALWAYS_ONE_LIT">
<TARGET_ANGLE_LIMIT_MIN Process="Float">
#ADJUSTED_ID_FLAP# 1 - 0 max sp0
#ANGLE_DEGREE_5# #ANGLE_DEGREE_4# #ANGLE_DEGREE_3# #ANGLE_DEGREE_2# #ANGLE_DEGREE_1# #FLAPS_INDEX_COUNT# l0 case sp1
#TARGET_ANGLE# l1 - 2 / l1 +
</TARGET_ANGLE_LIMIT_MIN>
<TARGET_ANGLE_LIMIT_MAX Process="Float">
#ADJUSTED_ID_FLAP# 1 + #MAX_FLAPS_INDEX# min sp0
#ANGLE_DEGREE_5# #ANGLE_DEGREE_4# #ANGLE_DEGREE_3# #ANGLE_DEGREE_2# #ANGLE_DEGREE_1# #FLAPS_INDEX_COUNT# l0 case sp1
l1 #TARGET_ANGLE# - 2 / #TARGET_ANGLE# +
</TARGET_ANGLE_LIMIT_MAX>
</Case>
</Switch>
</Parameters>
<Component ID="#NODE_ID#" Node="#NODE_ID#">
<UseTemplate Name="ASOBO_GT_Emissive_Gauge">
<Switch Param="TYPE">
<Case Value="ALWAYS_ONE_LIT">
<EMISSIVE_CODE>#TARGET_ANGLE_LIMIT_MIN# #TARGET_ANGLE_LIMIT_MAX# (A:TRAILING EDGE FLAPS LEFT ANGLE, degrees) rng</EMISSIVE_CODE>
</Case>
<Default>
<EMISSIVE_CODE>(A:TRAILING EDGE FLAPS LEFT ANGLE, degrees) #TARGET_ANGLE_DEGREE# - abs #VALUE_RANGE# <</EMISSIVE_CODE>
</Default>
</Switch>
</UseTemplate>
</Component>
</Template>
<!--
Light up when the trim is at TARGET_VALUE (0) +- RANGE_DELTA (0.02, that is 2%)
Can use a FAILURE condition (but no failure code, unless there is no more TODO in the Emissive template)
-->
<Template Name="ASOBO_HANDLING_Light_Trim_Subtemplate">
<Parameters Type="Default">
<NODE_ID>HANDLING_Light_Trim</NODE_ID>
<Switch Param="TRIM_TYPE">
<Case Value="AILERON">
<TRIM_SIMVAR>AILERON TRIM</TRIM_SIMVAR>
</Case>
<Case Value="ELEVATOR">
<TRIM_SIMVAR>ELEVATOR TRIM POSITION</TRIM_SIMVAR>
</Case>
<Case Value="RUDDER">
<TRIM_SIMVAR>RUDDER TRIM</TRIM_SIMVAR>
</Case>
<Default>
<TRIM_SIMVAR>ELEVATOR TRIM POSITION</TRIM_SIMVAR>
</Default>
</Switch>
<RANGE_DELTA>0.3</RANGE_DELTA>
</Parameters>
<Parameters Type="Default">
<Switch Param="TRIM_TYPE">
<Case Value="ELEVATOR">
<TARGET_VALUE>(A:ELEVATOR TRIM NEUTRAL, degree)</TARGET_VALUE>
</Case>
<Default>
<TARGET_VALUE>0</TARGET_VALUE>
</Default>
</Switch>
</Parameters>
<Component ID="#NODE_ID#" Node="#NODE_ID#">
<UseTemplate Name="ASOBO_GT_Emissive_Gauge">
<EMISSIVE_CODE>(A:#TRIM_SIMVAR#, degree) #TARGET_VALUE# - abs #RANGE_DELTA# <</EMISSIVE_CODE>
</UseTemplate>
</Component>
</Template>
<Template Name="ASOBO_HANDLING_AileronTrim_Template">
<Parameters Type="Default">
<ID>1</ID>
</Parameters>
<Parameters Type="Default">
<Condition Check="SECONDARY">
<True>
<IE_AILERONS_TRIM>#ID#_Secondary</IE_AILERONS_TRIM>
</True>
<False>
<IE_AILERONS_TRIM>#ID#</IE_AILERONS_TRIM>
</False>
</Condition>
</Parameters>
<Parameters Type="Default">
<Switch Param="INTERACTION_TYPE">
<Case Value="KNOB">
<NODE_ID>HANDLING_Knob_AileronTrim</NODE_ID>
<ANIM_NAME>HANDLING_Knob_AileronTrim</ANIM_NAME>
<PART_ID>HANDLING_Knob_AileronTrim</PART_ID>
<WWISE_EVENT_1>aileron_trim_knob_01</WWISE_EVENT_1>
<WWISE_EVENT_2>aileron_trim_knob_02</WWISE_EVENT_2>
<INCREMENT>15</INCREMENT>
</Case>
<Case Value="SWITCH">
<NODE_ID>HANDLING_Switch_AileronTrim</NODE_ID>
<ANIM_NAME>HANDLING_Switch_AileronTrim</ANIM_NAME>
<PART_ID>HANDLING_Switch_AileronTrim_LR</PART_ID>
<OTHER_PART_ID>HANDLING_Switch_AileronTrim</OTHER_PART_ID>
<WWISE_EVENT>aileron_trim_switch</WWISE_EVENT>
<ID>1</ID>
<INCREMENT>5</INCREMENT>
<SWITCH_DIRECTION>Horizontal</SWITCH_DIRECTION>
</Case>
</Switch>
<DRAG_INCREMENT>1</DRAG_INCREMENT>
<Condition Check="NEEDLE_NODE_ID">
<NEEDLE_ANIM_NAME>HANDLING_Knob_AileronTrim_Needle</NEEDLE_ANIM_NAME>
</Condition>
<ANIM_SIMVAR_MIN>-100</ANIM_SIMVAR_MIN>
<ANIM_SIMVAR_MAX>100</ANIM_SIMVAR_MAX>
<ANIM_SIMVAR_SCALE>-0.5</ANIM_SIMVAR_SCALE>
<TOOLTIPID>TT:COCKPIT.TOOLTIPS.AILERON_TRIM</TOOLTIPID>
<THRESHOLD_INPUT>0.00025</THRESHOLD_INPUT>
<THRESHOLD_MOUSE>0.005</THRESHOLD_MOUSE>
</Parameters>
<Parameters Type="Default">
<TOOLTIP_AILERONS_TRIM_TITLE>@TT_Package.HANDLING_KNOB_AILERON_TITLE</TOOLTIP_AILERONS_TRIM_TITLE>
</Parameters>
<Parameters Type="Override">
<TOOLTIP_TITLE>#TOOLTIP_AILERONS_TRIM_TITLE#</TOOLTIP_TITLE>
<TOOLTIP_ENTRY_0>HANDLING_AileronsTrim_#IE_AILERONS_TRIM#</TOOLTIP_ENTRY_0>
</Parameters>
<Switch Param="INTERACTION_TYPE">
<Case Value="SWITCH">
<UseTemplate Name="ASOBO_HANDLING_Trim_Variable_Speed_Base_Template">
<TRIM_NAME>AileronsTrim</TRIM_NAME>
<TRIM_TYPE>Ailerons</TRIM_TYPE>
<SWITCH_POSITION_TYPE>L</SWITCH_POSITION_TYPE>
<SWITCH_POSITION_VAR>XMLVAR_AileronTrim_Switch_#IE_AILERONS_TRIM#</SWITCH_POSITION_VAR>
<SWITCH_POSITION_TYPE_TIMER>L</SWITCH_POSITION_TYPE_TIMER>
<SWITCH_POSITION_VAR_TIMER>XMLVAR_AileronTrim_#IE_AILERONS_TRIM#_SwitchStateTimer</SWITCH_POSITION_VAR_TIMER>
</UseTemplate>
</Case>
<Case Value="KNOB">
<Component ID="#NODE_ID#" Node="#NODE_ID#">
<UseInputEvent ID="HANDLING">
<AILERONS_TRIM_ID>1</AILERONS_TRIM_ID>
</UseInputEvent>
<UseTemplate Name = "ASOBO_GT_Knob_Finite_Code">
<CURSOR>Hand</CURSOR>
<CLOCKWISE_CODE>
#INCREMENT# (>B:HANDLING_AileronsTrim_#IE_AILERONS_TRIM#_Inc)
</CLOCKWISE_CODE>
<ANTICLOCKWISE_CODE>
#INCREMENT# (>B:HANDLING_AileronsTrim_#IE_AILERONS_TRIM#_Dec)
</ANTICLOCKWISE_CODE>
<ANIM_CODE>(A:AILERON TRIM PCT, percent) 0.5 * 50 +</ANIM_CODE>
<Condition Check="INVERT_KNOB_ANIM">
<INVERT_ANIM>#INVERT_KNOB_ANIM#</INVERT_ANIM>
</Condition>
<Condition Valid="KNOB_HIGHLIGHT_NODE_ID">
<HIGHLIGHT_NODE_ID>#KNOB_HIGHLIGHT_NODE_ID#</HIGHLIGHT_NODE_ID>
</Condition>
</UseTemplate>
</Component>
<Condition Check="NEEDLE_NODE_ID">
<Component ID="#NEEDLE_NODE_ID#" Node="#NEEDLE_NODE_ID#">
<UseTemplate Name="ASOBO_GT_Anim_Sim">
<ANIM_NAME>#NEEDLE_ANIM_NAME#</ANIM_NAME>
<ANIM_SIMVAR>AILERON TRIM PCT</ANIM_SIMVAR>
<ANIM_SIMVAR_UNITS>percent</ANIM_SIMVAR_UNITS>
<ANIM_SIMVAR_SCALE>-0.5</ANIM_SIMVAR_SCALE>
<ANIM_SIMVAR_BIAS>50</ANIM_SIMVAR_BIAS>
<Condition Check="INVERT_NEEDLE_ANIM">
<INVERT_ANIM>#INVERT_NEEDLE_ANIM#</INVERT_ANIM>
</Condition>
</UseTemplate>
</Component>
</Condition>
</Case>
</Switch>
</Template>
<!-- On a KNOB interaction, you can set INVERT_EFFECT to True if you want to invert IE key (inc/dec) -->
<Template Name="ASOBO_HANDLING_RudderTrim_Template">
<Parameters Type="Default">
<ID>1</ID>
</Parameters>
<Parameters Type="Default">
<Condition Check="SECONDARY">
<True>
<IE_RUDDER_TRIM>#ID#_Secondary</IE_RUDDER_TRIM>
</True>
<False>
<IE_RUDDER_TRIM>#ID#</IE_RUDDER_TRIM>
</False>
</Condition>
</Parameters>
<Parameters Type="Default">
<MOUSE_WHEEL_INCREMENT>20</MOUSE_WHEEL_INCREMENT>
<NODE_ID>HANDLING_Knob_RudderTrim</NODE_ID>
<ANIM_NAME>HANDLING_Knob_RudderTrim</ANIM_NAME>
<RESET_PUSH_NODE_ID>HANDLING_Push_RudderTrim_Reset</RESET_PUSH_NODE_ID>
<RESET_PUSH_ANIM_NAME>HANDLING_Push_RudderTrim_Reset</RESET_PUSH_ANIM_NAME>
<PART_ID>HANDLING_Knob_RudderTrim</PART_ID>
<Condition Check="NEEDLE_NODE_ID">
<NEEDLE_ANIM_NAME>HANDLING_Knob_RudderTrim_Needle</NEEDLE_ANIM_NAME>
</Condition>
<WWISE_EVENT>rudder_trim_knob</WWISE_EVENT>
<WWISE_EVENT_1>rudder_trim_knob_01</WWISE_EVENT_1>
<WWISE_EVENT_2>rudder_trim_knob_02</WWISE_EVENT_2>
<Switch Param="INTERACTION_TYPE">
<Case Value="SWITCH">
<INCREMENT>25</INCREMENT>
<Condition Valid="NOT_DISABLED_BY_AP">
<False>
<ADDITIONAL_TESTS>(A:AUTOPILOT MASTER, Bool) ! and</ADDITIONAL_TESTS>
</False>
</Condition>
</Case>
<Case Value="WHEEL">
<CURSOR>Grab</CURSOR>
<INCREMENT>25</INCREMENT>
<UPPER_LIMIT>16384</UPPER_LIMIT>
<LOWER_LIMIT>-16384</LOWER_LIMIT>
</Case>
<Case Value="KNOB">
<INCREMENT>10</INCREMENT>
<UPPER_LIMIT>16384</UPPER_LIMIT>
<LOWER_LIMIT>-16384</LOWER_LIMIT>
</Case>
</Switch>
<TOOLTIP_RUDDER_TRIM_TITLE>@TT_Package.HANDLING_KNOB_RUDDER_TRIM_TITLE</TOOLTIP_RUDDER_TRIM_TITLE>
</Parameters>
<Parameters Type="Override">
<TOOLTIP_TITLE>#TOOLTIP_RUDDER_TRIM_TITLE#</TOOLTIP_TITLE>
<TOOLTIP_ENTRY_0>HANDLING_RudderTrim_#IE_RUDDER_TRIM#</TOOLTIP_ENTRY_0>
</Parameters>
<Switch Param="INTERACTION_TYPE">
<Case Value="SWITCH">
<UseTemplate Name="ASOBO_HANDLING_Trim_Variable_Speed_Base_Template">
<!-- Trim_Base configuration -->
<ARROW_TYPE>Curved</ARROW_TYPE>
<TRIM_NAME>RudderTrim</TRIM_NAME>
<TRIM_TYPE>Rudder</TRIM_TYPE>
<SWITCH_POSITION_TYPE>L</SWITCH_POSITION_TYPE>
<SWITCH_POSITION_VAR>XMLVAR_RudderTrim_Switch_#IE_RUDDER_TRIM#</SWITCH_POSITION_VAR>
<SWITCH_POSITION_TYPE_TIMER>L</SWITCH_POSITION_TYPE_TIMER>
<SWITCH_POSITION_VAR_TIMER>XMLVAR_RudderTrim_#IE_RUDDER_TRIM#_SwitchStateTimer</SWITCH_POSITION_VAR_TIMER>
</UseTemplate>
<Condition Check="NO_RESET_PUSH">
<False>
<UseTemplate Name="ASOBO_HANDLING_Base_Template">
<INTERACTION_TYPE>Push</INTERACTION_TYPE>
<TT_ICON>Push</TT_ICON>
<IE_NAME>RudderTrim_Reset</IE_NAME>
<SET_CODE>0 (>K:RUDDER_TRIM_SET) 1 (>O:_ButtonAnimVar)</SET_CODE>
<WWISE_EVENT_1>rudder_trim_rest_push_button_on</WWISE_EVENT_1>
<WWISE_EVENT_2>rudder_trim_rest_push_button_on</WWISE_EVENT_2>
<TT_DESCRIPTION_ID>@TT_Package.HANDLING_PUSH_RUDDERRESET_ACTION</TT_DESCRIPTION_ID>
<TOOLTIP_TITLE>@TT_Package.HANDLING_PUSH_RUDDERRESET_TITLE</TOOLTIP_TITLE>
<TOOLTIP_ENTRY_0>HANDLING_RudderTrim_Reset</TOOLTIP_ENTRY_0>
<NODE_ID>#RESET_PUSH_NODE_ID#</NODE_ID>
<ANIM_NAME>#RESET_PUSH_ANIM_NAME#</ANIM_NAME>
<BINDING_INC_0_EVENT_ID>RUDDER_TRIM_RESET</BINDING_INC_0_EVENT_ID>
</UseTemplate>
</False>
</Condition>
</Case>
<Case Value="WHEEL">
<Component ID="#NODE_ID#" Node="#NODE_ID#">
<UseInputEvent ID="HANDLING">
<RUDDER_TRIM_ID>1</RUDDER_TRIM_ID>
</UseInputEvent>
<Condition Check="INFINITE">
<True>
<UseTemplate Name="ASOBO_GT_Lever_DraggingYAxis_Code">
<UP_CODE>(>B:HANDLING_RudderTrim_#IE_RUDDER_TRIM#_Inc)</UP_CODE>
<DOWN_CODE>(>B:HANDLING_RudderTrim_#IE_RUDDER_TRIM#_Dec)</DOWN_CODE>
<IS_LOOPING/>
</UseTemplate>
</True>
<False>
<UseTemplate Name="ASOBO_GT_Lever_DraggingWheelLeftDrag_Axis">
<NO_ARROWS>True</NO_ARROWS>
<CURSOR>Grab</CURSOR>
<ANIM_LENGTH>100</ANIM_LENGTH>
<ANIM_CODE>(B:HANDLING_RudderTrim_#IE_RUDDER_TRIM#)</ANIM_CODE>
<Condition Valid="USE_TRAJECTORY_DRAG_MODE">
<True>
<DRAG_CODE>
(M:DragPercent) 2 * 1 - 16384 * #UPPER_LIMIT# min #LOWER_LIMIT# max (>B:HANDLING_RudderTrim_#IE_RUDDER_TRIM#_Set)
</DRAG_CODE>
</True>
<False>
<DRAG_CODE>
(A:RUDDER TRIM PCT, position 16k) #INCREMENT# (O:DragScale) * -1 * + #UPPER_LIMIT# min #LOWER_LIMIT# max (>B:HANDLING_RudderTrim_#IE_RUDDER_TRIM#_Set)
</DRAG_CODE>
</False>
</Condition>
<POSITIVE_AXIS_CODE>#MOUSE_WHEEL_INCREMENT# (>B:HANDLING_RudderTrim_#IE_RUDDER_TRIM#_Dec)</POSITIVE_AXIS_CODE>
<NEGATIVE_AXIS_CODE>#MOUSE_WHEEL_INCREMENT# (>B:HANDLING_RudderTrim_#IE_RUDDER_TRIM#_Inc)</NEGATIVE_AXIS_CODE>
</UseTemplate>
</False>
</Condition>
</Component>
</Case>
<Case Value="KNOB">
<Component ID="#NODE_ID#" Node="#NODE_ID#">
<UseInputEvent ID="HANDLING">
<RUDDER_TRIM_ID>1</RUDDER_TRIM_ID>
</UseInputEvent>
<Parameters Type="Override">
<Condition Valid="INVERT_EFFECT">
<False>
<INC>Inc</INC>
<DEC>Dec</DEC>
</False>
<True>
<INC>Dec</INC>
<DEC>Inc</DEC>
</True>
</Condition>
</Parameters>
<UseTemplate Name = "ASOBO_GT_Knob_Finite_Code">
<CURSOR>Hand</CURSOR>
<CLOCKWISE_CODE>
#INCREMENT# (>B:HANDLING_RudderTrim_#IE_RUDDER_TRIM#_#INC#)
</CLOCKWISE_CODE>
<ANTICLOCKWISE_CODE>
#INCREMENT# (>B:HANDLING_RudderTrim_#IE_RUDDER_TRIM#_#DEC#)
</ANTICLOCKWISE_CODE>
<ANIM_CODE>(B:HANDLING_RudderTrim_#IE_RUDDER_TRIM#)</ANIM_CODE>
<Condition Valid="INVERT_KNOB_ANIM">
<INVERT_ANIM>#INVERT_KNOB_ANIM#</INVERT_ANIM>
</Condition>
<Condition Valid="KNOB_HIGHLIGHT_NODE_ID">
<HIGHLIGHT_NODE_ID>#KNOB_HIGHLIGHT_NODE_ID#</HIGHLIGHT_NODE_ID>
</Condition>
</UseTemplate>
</Component>
</Case>
</Switch>
<Condition Check="NEEDLE_NODE_ID">
<Component ID="#NEEDLE_NODE_ID#" Node="#NEEDLE_NODE_ID#">
<UseTemplate Name="ASOBO_GT_Anim_Sim">
<ANIM_NAME>#NEEDLE_ANIM_NAME#</ANIM_NAME>
<ANIM_SIMVAR>RUDDER TRIM PCT</ANIM_SIMVAR>
<ANIM_SIMVAR_UNITS>percent</ANIM_SIMVAR_UNITS>
<ANIM_SIMVAR_SCALE>0.5</ANIM_SIMVAR_SCALE>
<ANIM_SIMVAR_BIAS>50</ANIM_SIMVAR_BIAS>
</UseTemplate>
</Component>
</Condition>
</Template>
<Template Name="ASOBO_HANDLING_ElevatorTrim_Template">
<Parameters Type="Default">
<ID>1</ID>
</Parameters>
<Parameters Type="Default">
<Condition Check="SECONDARY">
<True>
<IE_ELEVATOR_TRIM>#ID#_Secondary</IE_ELEVATOR_TRIM>
</True>
<False>
<IE_ELEVATOR_TRIM>#ID#</IE_ELEVATOR_TRIM>
</False>
</Condition>
</Parameters>
<Parameters Type="Default">
<Switch Param="INTERACTION_TYPE">
<Case Value="WHEEL">
<ANIM_NAME>HANDLING_Wheel_ElevatorTrim</ANIM_NAME>
<NODE_ID>HANDLING_Wheel_ElevatorTrim</NODE_ID>
<PART_ID>HANDLING_Wheel_ElevatorTrim</PART_ID>
<Condition Check="INFINITE">
<True>
<DRAG_SPEED>8</DRAG_SPEED>
</True>
</Condition>
<INCREMENT>30</INCREMENT>
<MOUSE_WHEEL_INCREMENT>16</MOUSE_WHEEL_INCREMENT>
<UPPER_LIMIT>16384</UPPER_LIMIT>
<LOWER_LIMIT>-16384</LOWER_LIMIT>
<AXIS>Y</AXIS>
<Condition Check="DOUBLE_WHEEL">
<NODE_ID2>HANDLING_Wheel_ElevatorTrim_Pitch_2</NODE_ID2>
</Condition>
<DRAG_AXIS_SCALE>100</DRAG_AXIS_SCALE>
<WWISE_EVENT_1>elevator_trim_lock_on</WWISE_EVENT_1>
<WWISE_EVENT_2>elevator_trim_lock_off</WWISE_EVENT_2>
<DRAG_SCALAR>0.001</DRAG_SCALAR>
<INPUTEVENT_VAR_TYPE>L</INPUTEVENT_VAR_TYPE>
<INPUTEVENT_VAR_NAME>HANDLING_ElevatorTrim</INPUTEVENT_VAR_NAME>
</Case>
<Case Value="SWITCH">
<NODE_ID>HANDLING_Switch_ElevatorTrim_#ID#</NODE_ID>
<ANIM_NAME>HANDLING_Switch_ElevatorTrim_#ID#</ANIM_NAME>
<PART_ID>HANDLING_Switch_Elevator_Trim</PART_ID>
<OTHER_PART_ID>HANDLING_Switch_ElevatorTrim</OTHER_PART_ID>
<WWISE_EVENT>elevator_switch</WWISE_EVENT>
<COUNT>2</COUNT>
<ANIMREF_ID>-1</ANIMREF_ID>
<ANIMTIP_0_ON_CURSOR>UpArrow</ANIMTIP_0_ON_CURSOR>
<ANIMTIP_1_ON_CURSOR>DownArrow</ANIMTIP_1_ON_CURSOR>
<ANIMTIP_0>TT:COCKPIT.TOOLTIPS.MET_PITCH_TRIM_DN</ANIMTIP_0>
<ANIMTIP_1>TT:COCKPIT.TOOLTIPS.MET_PITCH_TRIM_UP</ANIMTIP_1>
<TRIM_LIMIT>20</TRIM_LIMIT><!-- elevator_trim_limit in flight_model.cfg -->
<SWITCH_POSITION_TYPE>L</SWITCH_POSITION_TYPE>
<SWITCH_POSITION_VAR>XMLVAR_ElevatorTrim_Switch_#IE_ELEVATOR_TRIM#</SWITCH_POSITION_VAR>
<SWITCH_POSITION_TYPE_TIMER>L</SWITCH_POSITION_TYPE_TIMER>
<SWITCH_POSITION_VAR_TIMER>XMLVAR_ElevatorTrim_#IE_ELEVATOR_TRIM#_SwitchStateTimer</SWITCH_POSITION_VAR_TIMER>
</Case>
</Switch>
</Parameters>
<Parameters Type="Default">
<TOOLTIP_ELEVATOR_TRIM_TITLE>@TT_Package.HANDLING_SWITCH_YOKE_ELEVATORTRIM_TITLE</TOOLTIP_ELEVATOR_TRIM_TITLE>
</Parameters>
<Parameters Type="Override">
<TOOLTIP_TITLE>#TOOLTIP_ELEVATOR_TRIM_TITLE#</TOOLTIP_TITLE>
<TOOLTIP_ENTRY_0>HANDLING_ElevatorTrim_#IE_ELEVATOR_TRIM#</TOOLTIP_ENTRY_0>
<Switch Param="INTERACTION_TYPE">
<Case Value="WHEEL">
<Condition Check="INFINITE">
<True>
<UP_CODE>(>B:HANDLING_ElevatorTrim_#IE_ELEVATOR_TRIM#_Inc)</UP_CODE>
<DOWN_CODE>(>B:HANDLING_ElevatorTrim_#IE_ELEVATOR_TRIM#_Dec)</DOWN_CODE>
</True>
<False>
<Condition Valid="USE_TRAJECTORY_DRAG_MODE">
<True>
<DRAG_CODE>
(M:DragPercent) 2 * 1 - 16384 * #UPPER_LIMIT# min #LOWER_LIMIT# max (>B:HANDLING_ElevatorTrim_#IE_ELEVATOR_TRIM#_Set)
</DRAG_CODE>
</True>
<False>
<Condition Valid="SLOW_DRAG">
<True>
<DRAG_CODE>
-1 1 (I:_comparePos) (O:_LastPos) < ? sp0 (#INPUTEVENT_VAR_TYPE#:#INPUTEVENT_VAR_NAME#) #INCREMENT# (O:DragScale) * l0 * + #UPPER_LIMIT# min #LOWER_LIMIT# max (>B:HANDLING_ElevatorTrim_#IE_ELEVATOR_TRIM#_Set)
</DRAG_CODE>
</True>
<False>
<DRAG_CODE>
(#INPUTEVENT_VAR_TYPE#:#INPUTEVENT_VAR_NAME#) #INCREMENT# (O:DragScale) * -1 * + #UPPER_LIMIT# min #LOWER_LIMIT# max (>B:HANDLING_ElevatorTrim_#IE_ELEVATOR_TRIM#_Set)
</DRAG_CODE>
</False>
</Condition>
</False>
</Condition>
<POSITIVE_AXIS_CODE>#MOUSE_WHEEL_INCREMENT# (>B:HANDLING_ElevatorTrim_#IE_ELEVATOR_TRIM#_Dec)</POSITIVE_AXIS_CODE>
<NEGATIVE_AXIS_CODE>#MOUSE_WHEEL_INCREMENT# (>B:HANDLING_ElevatorTrim_#IE_ELEVATOR_TRIM#_Inc)</NEGATIVE_AXIS_CODE>
</False>
</Condition>
</Case>
</Switch>
</Parameters>
<Switch Param="INTERACTION_TYPE">
<Case Value="WHEEL">
<Component ID="#NODE_ID#" Node="#NODE_ID#">
<Condition Valid="SLOW_DRAG">
<True>
<UseTemplate Name="ASOBO_GT_Update">
<UPDATE_ONCE>True</UPDATE_ONCE>
<UPDATE_CODE>#DRAG_AXIS_SCALE# (>O:DragScale)</UPDATE_CODE>
</UseTemplate>
<UseTemplate Name="ASOBO_GT_Update">
<FREQUENCY>3</FREQUENCY>
<UPDATE_CODE>(O:_LastPos) (>I:_comparePos)</UPDATE_CODE>
</UseTemplate>
</True>
</Condition>
<UseInputEvent ID="HANDLING">
<ELEVATOR_TRIM_ID>1</ELEVATOR_TRIM_ID>
</UseInputEvent>
<DefaultTemplateParameters>
<Condition Valid="HIGHLIGHT_NODE_ID_1">
<HIGHLIGHT_NODE_ID>#HIGHLIGHT_NODE_ID_1#</HIGHLIGHT_NODE_ID>
</Condition>
</DefaultTemplateParameters>
<Condition Check="INFINITE">
<True>
<UseTemplate Name="ASOBO_GT_Lever_DraggingYAxis_Code">
<IS_LOOPING/>
</UseTemplate>
</True>
<False>
<UseTemplate Name="ASOBO_GT_Lever_DraggingWheelLeftDrag_Axis">
<NO_ARROWS>True</NO_ARROWS>
<CURSOR>Grab</CURSOR>
<ANIM_LENGTH>100</ANIM_LENGTH>
<ANIM_CODE>(B:HANDLING_ElevatorTrim_#IE_ELEVATOR_TRIM#)</ANIM_CODE>
</UseTemplate>
</False>
</Condition>
</Component>
<Condition Check="HIGHLIGHT_NODE_ID">
<UseTemplate Name="ASOBO_GT_ComponentWith_PART_ID">
<NODE_ID>#HIGHLIGHT_NODE_ID#</NODE_ID>
</UseTemplate>
</Condition>
<Condition Check="DOUBLE_WHEEL">
<Component ID="#NODE_ID2#" Node="#NODE_ID2#">
<DefaultTemplateParameters>
<Condition Valid="HIGHLIGHT_NODE_ID_2">
<HIGHLIGHT_NODE_ID>#HIGHLIGHT_NODE_ID_2#</HIGHLIGHT_NODE_ID>
</Condition>
</DefaultTemplateParameters>
<Condition Check="INFINITE">
<True>
<UseTemplate Name="ASOBO_GT_Interaction_DraggingYAxis_Code">
<HELPID>HELPID_GAUGE_PITCH_TRIM</HELPID>
<IS_LOOPING/>
</UseTemplate>
</True>
<False>
<UseTemplate Name="ASOBO_GT_Interaction_WheelLeftDrag_Axis">
<NO_ARROWS>True</NO_ARROWS>
<CURSOR>Grab</CURSOR>
</UseTemplate>
</False>
</Condition>
</Component>
</Condition>
</Case>
<Case Value="SWITCH">
<UseTemplate Name="ASOBO_HANDLING_Trim_Variable_Speed_Base_Template">
<SWITCH_DIRECTION>Vertical</SWITCH_DIRECTION>
<!-- Trim_Base configuration -->
<TRIM_NAME>ElevatorTrim</TRIM_NAME>
<TRIM_TYPE>Elevator</TRIM_TYPE>
</UseTemplate>
</Case>
</Switch>
</Template>
<!-- req: UP_DN_TRIM_TYPE & L_R_TRIM_TYPE (ELEVATOR, AILERON, RUDDER) -->
<Template Name="ASOBO_HANDLING_Combined_Trim_SubTemplate">
<Parameters Type="Default">
<NODE_ID>HANDLING_#INTERACTION_TYPE#_Combined_Trim</NODE_ID>
<ANIM_NAME_L_R>HANDLING_#INTERACTION_TYPE#_Combined_Trim_L_R</ANIM_NAME_L_R>
<ANIM_NAME_DN_UP>HANDLING_#INTERACTION_TYPE#_Combined_Trim_L_R</ANIM_NAME_DN_UP>
<TRIM_UPDATE_FREQUENCY>20</TRIM_UPDATE_FREQUENCY>
<WWISE_PREFIX>trim</WWISE_PREFIX>
</Parameters>
<Parameters Type="Override">
<TRIM_TYPE_0>#L_R_TRIM_TYPE#</TRIM_TYPE_0>
<TRIM_TYPE_1>#UP_DN_TRIM_TYPE#</TRIM_TYPE_1>
</Parameters>
<Parameters Type="Override">
<Loop>
<Setup>
<Param>CUR_ID</Param>
<From>0</From>
<Inc>1</Inc>
<To>1</To>
</Setup>
<Do>
<Parameters Type="Override">
<TRIM_TYPE Process="Param">TRIM_TYPE_#CUR_ID#</TRIM_TYPE>
</Parameters>
<Switch Param="TRIM_TYPE">
<Case Value="RUDDER">
<INC_TRIM_#CUR_ID#>(>K:RUDDER_TRIM_RIGHT)</INC_TRIM_#CUR_ID#>
<DEC_TRIM_#CUR_ID#>(>K:RUDDER_TRIM_LEFT)</DEC_TRIM_#CUR_ID#>
<GET_TRIM_#CUR_ID#>(A:RUDDER TRIM, degrees)</GET_TRIM_#CUR_ID#>
<TT_TRIM_#CUR_ID#>@TT_Package.HANDLING_KNOB_RUDDER_TRIM_ACTION</TT_TRIM_#CUR_ID#>
</Case>
<Case Value="AILERON">
<INC_TRIM_#CUR_ID#>(>K:AILERON_TRIM_RIGHT)</INC_TRIM_#CUR_ID#>
<DEC_TRIM_#CUR_ID#>(>K:AILERON_TRIM_LEFT)</DEC_TRIM_#CUR_ID#>
<GET_TRIM_#CUR_ID#>(A:AILERON TRIM, degrees)</GET_TRIM_#CUR_ID#>
<TT_TRIM_#CUR_ID#>@TT_Package.HANDLING_KNOB_AILERON_ACTION</TT_TRIM_#CUR_ID#>
</Case>
<Case Value="ELEVATOR">
<INC_TRIM_#CUR_ID#>(>K:ELEV_TRIM_DN)</INC_TRIM_#CUR_ID#>
<DEC_TRIM_#CUR_ID#>(>K:ELEV_TRIM_UP)</DEC_TRIM_#CUR_ID#>
<GET_TRIM_#CUR_ID#>(A:ELEVATOR TRIM POSITION, degrees)</GET_TRIM_#CUR_ID#>
<TT_TRIM_#CUR_ID#>@TT_Package.HANDLING_SWITCH_YOKE_ELEVATORTRIM_ACTION</TT_TRIM_#CUR_ID#>
<TT_VALUE_3>@TT_Package.HANDLING_WHEEL_ELEVATOR_STATE_NOSEDOWN</TT_VALUE_3>
<TT_VALUE_2>@TT_Package.HANDLING_WHEEL_ELEVATOR_STATE_NOSEUP</TT_VALUE_2>
</Case>
<Case Value="LONGITUDINAL">
<INC_TRIM_#CUR_ID#>(>K:ROTOR_LONGITUDINAL_TRIM_DEC)</INC_TRIM_#CUR_ID#>
<DEC_TRIM_#CUR_ID#>(>K:ROTOR_LONGITUDINAL_TRIM_INC)</DEC_TRIM_#CUR_ID#>
<GET_TRIM_#CUR_ID#>(A:ROTOR LONGITUDINAL TRIM PCT, percent)</GET_TRIM_#CUR_ID#>
<TT_TRIM_#CUR_ID#>@TT_Package.HANDLING_JOYSTICK_LONGITUDINAL_TRIM_ACTION</TT_TRIM_#CUR_ID#>
<FORMAT_VALUE>'%.1f %%' @sprintf</FORMAT_VALUE>
</Case>
<Case Value="LATERAL">
<INC_TRIM_#CUR_ID#>(>K:ROTOR_LATERAL_TRIM_INC)</INC_TRIM_#CUR_ID#>
<DEC_TRIM_#CUR_ID#>(>K:ROTOR_LATERAL_TRIM_DEC)</DEC_TRIM_#CUR_ID#>
<GET_TRIM_#CUR_ID#>(A:ROTOR LATERAL TRIM PCT, percent)</GET_TRIM_#CUR_ID#>
<TT_TRIM_#CUR_ID#>@TT_Package.HANDLING_JOYSTICK_LATERAL_TRIM_ACTION</TT_TRIM_#CUR_ID#>
<FORMAT_VALUE>'%.1f %%' @sprintf</FORMAT_VALUE>
</Case>
</Switch>
</Do>
</Loop>
</Parameters>
<Component ID="#NODE_ID#" Node="#NODE_ID#">
<Parameters Type="Default">
<THRESHOLD_X_INPUT>0.01</THRESHOLD_X_INPUT>
<THRESHOLD_X_MOUSE>0.001</THRESHOLD_X_MOUSE>
<THRESHOLD_Y_INPUT>0.01</THRESHOLD_Y_INPUT>
<THRESHOLD_Y_MOUSE>0.001</THRESHOLD_Y_MOUSE>
<TOOLTIP_TITLE>@TT_Package.YOKE_PUSH_NOSE_TITLE</TOOLTIP_TITLE>
<TT_DESCRIPTION_ID>@TT_Package.YOKE_PUSH_NOSE_ACTION</TT_DESCRIPTION_ID>
<FORMAT_VALUE>'%.1f°' @sprintf</FORMAT_VALUE>
<TT_VALUE_IS_DYNAMIC>True</TT_VALUE_IS_DYNAMIC>
<STATE_VAR>HANDLING_#TRIM_TYPE_0#_#TRIM_TYPE_1#_Trim_Position</STATE_VAR>
</Parameters>
<UseTemplate Name="ASOBO_HANDLING_Axis_Event_Base_Template">
<IE_NAME>#TRIM_TYPE_0#_Trim</IE_NAME>
<AXIS>X</AXIS>
<LEFT_CODE_EXTERNAL>0 (>L:#STATE_VAR#)</LEFT_CODE_EXTERNAL>
<IE_STANDBY_CODE>4 (>L:#STATE_VAR#)</IE_STANDBY_CODE>
<RIGHT_CODE_EXTERNAL>1 (>L:#STATE_VAR#)</RIGHT_CODE_EXTERNAL>
<TT_VALUE>#GET_TRIM_0# #FORMAT_VALUE#</TT_VALUE>
<TT_DESCRIPTION_ID>#TT_TRIM_0#</TT_DESCRIPTION_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_HANDLING_Axis_Event_Base_Template">
<IE_NAME>#TRIM_TYPE_1#_Trim</IE_NAME>
<AXIS>Y</AXIS>
<LEFT_CODE_EXTERNAL>2 (>L:#STATE_VAR#)</LEFT_CODE_EXTERNAL>
<IE_STANDBY_CODE>4 (>L:#STATE_VAR#)</IE_STANDBY_CODE>
<RIGHT_CODE_EXTERNAL>3 (>L:#STATE_VAR#)</RIGHT_CODE_EXTERNAL>
<TT_VALUE>#GET_TRIM_1# #FORMAT_VALUE#</TT_VALUE>
<TT_DESCRIPTION_ID>#TT_TRIM_1#</TT_DESCRIPTION_ID>
</UseTemplate>
<UseTemplate Name="ASOBO_HANDLING_Base_Template">
<IE_NAME>#TRIM_TYPE_0#_#TRIM_TYPE_1#_Trim</IE_NAME>
<JOYSTICK_TYPE>5_STATES</JOYSTICK_TYPE>
<JOYSTICK_INTERACTION_TYPE>POSITIONAL</JOYSTICK_INTERACTION_TYPE>
<CREATE_COMPONENT>False</CREATE_COMPONENT>
<IE_ID_EXTERNAL_0>#TRIM_TYPE_0#_Trim</IE_ID_EXTERNAL_0>
<IE_ID_EXTERNAL_1>#TRIM_TYPE_1#_Trim</IE_ID_EXTERNAL_1>
<ON_POS_LEFT>#DEC_TRIM_0#</ON_POS_LEFT>
<ON_POS_RIGHT>#INC_TRIM_0#</ON_POS_RIGHT>
<ON_POS_DOWN>#DEC_TRIM_1#</ON_POS_DOWN>
<ON_POS_UP>#INC_TRIM_1#</ON_POS_UP>
<GET_STATE_EXTERNAL>(L:#STATE_VAR#) sp0</GET_STATE_EXTERNAL>
<LOCAL_VAR_TO_WATCH_0>#STATE_VAR#</LOCAL_VAR_TO_WATCH_0>
<FREQUENCY>#TRIM_UPDATE_FREQUENCY#</FREQUENCY>
</UseTemplate>
</Component>
</Template>
<!--
Choose what trim you want to disable with variable TYPE
Aileron , RudderAileron (both) , Elevator ,
Electrical (if you want to disable any electrical interaction of a switch type trim)
If you need more, add a case that override the SET_TRIM_X variables you need
-->
<Template Name="ASOBO_HANDLING_AP_Trim_Disc_SubTemplate">
<Parameters Type="Default">
<TYPE>RudderAileron</TYPE>
<SET_TRIM_ELEVATOR/>
<SET_TRIM_RUDDER/>
<SET_TRIM_AILERON/>
<SET_TRIM_ELECTRICAL/>
<GET_TRIM/>
<ELECTRICAL_POWER_VAR_NAME>XMLVAR_Electrical_Trim_Disabled</ELECTRICAL_POWER_VAR_NAME>
<ELECTRICAL_POWER_VAR_TYPE>L</ELECTRICAL_POWER_VAR_TYPE>
</Parameters>
<Parameters Type="Override">
<Switch Param="TYPE">
<Case Value="RudderAileron">
<SET_TRIM_RUDDER>l0 (>K:RUDDER_TRIM_DISABLED_SET)</SET_TRIM_RUDDER>
<SET_TRIM_AILERON>l0 (>K:AILERON_TRIM_DISABLED_SET)</SET_TRIM_AILERON>
<GET_TRIM>(A:RUDDER TRIM DISABLED, Bool) (A:ELEVATOR TRIM DISABLED, Bool) and</GET_TRIM>
</Case>
<Case Value="Elevator">
<SET_TRIM_ELEVATOR>l0 (>K:ELEVATOR_TRIM_DISABLED_SET)</SET_TRIM_ELEVATOR>
<GET_TRIM>(A:ELEVATOR TRIM DISABLED, Bool)</GET_TRIM>
</Case>
<Case Value="Aileron">
<SET_TRIM_ELEVATOR>l0 (>K:AILERON_TRIM_DISABLED_SET)</SET_TRIM_ELEVATOR>
<GET_TRIM>(A:AILERON TRIM DISABLED, Bool)</GET_TRIM>
</Case>
<Case Value="Electrical">
<SET_TRIM_ELECTRICAL>l0 (>#ELECTRICAL_POWER_VAR_TYPE#:#ELECTRICAL_POWER_VAR_NAME#)</SET_TRIM_ELECTRICAL>
<GET_TRIM>(#ELECTRICAL_POWER_VAR_TYPE#:#ELECTRICAL_POWER_VAR_NAME#)</GET_TRIM>
</Case>
</Switch>
</Parameters>
<Parameters Type="Default">
<NODE_ID>HANDLING_#INTERACTION_TYPE#_AP_Trim_Disc_#ID#</NODE_ID>
<ANIM_NAME>HANDLING_#INTERACTION_TYPE#_AP_Trim_Disc_#ID#</ANIM_NAME>
<SET_TRIM>sp0 #SET_TRIM_ELEVATOR# #SET_TRIM_RUDDER# #SET_TRIM_AILERON# #SET_TRIM_ELECTRICAL#</SET_TRIM>
<Switch Param="INTERACTION_TYPE">
<Case Value="PUSH">
<WWISE_EVENT_1>yoke_push_button_on</WWISE_EVENT_1>
<WWISE_EVENT_2>yoke_push_button_off</WWISE_EVENT_2>
</Case>
<Case Value="SWITCH">
<WWISE_EVENT_1>yoke_push_button_on</WWISE_EVENT_1>
<WWISE_EVENT_2>yoke_push_button_off</WWISE_EVENT_2>
</Case>
</Switch>
</Parameters>
<Component ID="#NODE_ID#" Node="#NODE_ID#">
<Parameters Type="Default">
<ANIM_VAR>_ButtonDown</ANIM_VAR>
<ANIM_VAR_TYPE>O</ANIM_VAR_TYPE>
</Parameters>
<Parameters Type="Override">
<Switch Param="INTERACTION_TYPE">
<Case Value="PUSH">
<PUSH_EVENT>1 #SET_TRIM# 1 (>K:AUTOPILOT_OFF) (>H:Generic_Autopilot_Disc) 100 (>#ANIM_VAR_TYPE#:#ANIM_VAR#)</PUSH_EVENT>
<RELEASE_EVENT>0 #SET_TRIM# 0 (>#ANIM_VAR_TYPE#:#ANIM_VAR#)</RELEASE_EVENT>
</Case>
</Switch>
<BTN_ID>Trim_Disconnect</BTN_ID>
<TOOLTIP_TITLE>@TT_Package.YOKE_PUSH_AP_TRIM_DISC_TITLE</TOOLTIP_TITLE>
<TOOLTIP_ENTRY_0>HANDLING_Trim_Disconnect</TOOLTIP_ENTRY_0>
<TT_DESCRIPTION_ID>@TT_Package.YOKE_PUSH_AP_TRIM_DISC_ACTION</TT_DESCRIPTION_ID>
</Parameters>
<Switch Param="INTERACTION_TYPE">
<Case Value="PUSH">
<UseInputEvent ID="HANDLING">
<BINDING_DEC_0>Release</BINDING_DEC_0>
<BINDING_DEC_0_PARAM_0>0</BINDING_DEC_0_PARAM_0>
<SET_STATE_EXTERNAL>p0 if{ #PUSH_EVENT# } els{ #RELEASE_EVENT# }</SET_STATE_EXTERNAL>
<BINDING_INC_0>Push</BINDING_INC_0>
<BINDING_INC_0_PARAM_0>1</BINDING_INC_0_PARAM_0>
<ANIM>EXTERNAL</ANIM>
<TT_VALUE>#GET_TRIM# if{ (R:1:@TT_Package.GT_STATE_DISCONNECTED) } els{ (R:1:@TT_Package.GT_STATE_CONNECTED) }</TT_VALUE>
<TT_VALUE_IS_DYNAMIC>True</TT_VALUE_IS_DYNAMIC>
</UseInputEvent>
<UseTemplate Name="ASOBO_GT_Push_Button_Held">
<LEFT_SINGLE_CODE>(>B:HANDLING_#BTN_ID#_Push)</LEFT_SINGLE_CODE>
<LEFT_LEAVE_CODE>(>B:HANDLING_#BTN_ID#_Release)</LEFT_LEAVE_CODE>
<OVERRIDE_ANIM_CODE>(#ANIM_VAR_TYPE#:#ANIM_VAR#)</OVERRIDE_ANIM_CODE>
</UseTemplate>
</Case>
<Case Value="SWITCH">
<UseInputEvent ID="HANDLING">
<GET_STATE_EXTERNAL>#GET_TRIM# sp0</GET_STATE_EXTERNAL>
<SET_STATE_ON>1 #SET_TRIM#</SET_STATE_ON>
<SET_STATE_OFF>0 #SET_TRIM#</SET_STATE_OFF>
<SIM_STATE_IS_ON_EXTERNAL>l0</SIM_STATE_IS_ON_EXTERNAL>
<ANIM>EXTERNAL</ANIM>
</UseInputEvent>
<UseTemplate Name="ASOBO_GT_Switch_Code">
<LEFT_SINGLE_CODE>(>B:HANDLING_#BTN_ID#_Toggle)</LEFT_SINGLE_CODE>
<ANIM_CODE>(B:HANDLING_#BTN_ID#, Bool) 100 *</ANIM_CODE>
</UseTemplate>
</Case>
</Switch>
</Component>
</Template>
<!-- REQ: NODE_ID, ANIM_NAME, TRIM_LIMIT, TRIM_NAME, TRIM_TYPE -->
<Template Name="ASOBO_HANDLING_Trim_Variable_Speed_Base_Template">
<Parameters Type="Default">
<Switch Param="TRIM_TYPE">
<Case Value="Elevator">
<GET_TRIM>(A:ELEVATOR TRIM PCT, percent)</GET_TRIM>
<SET_TRIM>(>K:ELEVATOR_TRIM_SET)</SET_TRIM>
<ELEVATOR_TRIM_ID>1</ELEVATOR_TRIM_ID>
</Case>
<Case Value="Rudder">
<GET_TRIM>(A:RUDDER TRIM PCT, Percent)</GET_TRIM>
<SET_TRIM>(>K:RUDDER_TRIM_SET_EX1)</SET_TRIM>
<RUDDER_TRIM_ID>1</RUDDER_TRIM_ID>
</Case>
<Case Value="Ailerons">
<GET_TRIM>(A:AILERON TRIM PCT, percent)</GET_TRIM>
<SET_TRIM>(>K:AILERON_TRIM_SET_EX1)</SET_TRIM>
<TRIM_LIMIT>10</TRIM_LIMIT><!-- hardcoded in cpp -->
<AILERONS_TRIM_ID>1</AILERONS_TRIM_ID>
</Case>
</Switch>
<UPDATE_FREQ>10</UPDATE_FREQ><!-- How many updates per second -->
<UPDATE_COUNT_BEFORE_FAST_MODE>40</UPDATE_COUNT_BEFORE_FAST_MODE>
<UPDATE_COUNT_BEFORE_REPEAT>5</UPDATE_COUNT_BEFORE_REPEAT>
<MOMENTARY_MIN_DURATION>0.1</MOMENTARY_MIN_DURATION>
<TRIM_LIMIT>10</TRIM_LIMIT><!-- DEGREES -->
<NORMAL_INC_DEGREES>0.1</NORMAL_INC_DEGREES><!-- How many degrees per update -->
<FAST_MODE_SCALE>3</FAST_MODE_SCALE><!-- How many time faster the increment is when in fast mode -->
<SCALE_INCREMENT>163.83 * 16383 min -16383 max</SCALE_INCREMENT><!-- Used for elevator trim since you don't set a percentage but a value scaled by 163.83 -->
<Condition Valid="LOCK_NODE_ID">
<VAR_NAME_TRIM_LOCK_UNLOCKED>XMLVAR_#TRIM_NAME##ID#_Unlocked</VAR_NAME_TRIM_LOCK_UNLOCKED>
<VAR_SCOPE_TRIM_LOCK_UNLOCKED>I</VAR_SCOPE_TRIM_LOCK_UNLOCKED>
</Condition>
<Condition Check="SECONDARY">
<True>
<ADDITIONAL_TESTS>(B:HANDLING_Secondary_#TRIM_NAME#_Available, Bool) and</ADDITIONAL_TESTS>
</True>
<False>
<ADDITIONAL_TESTS/>
</False>
</Condition>
<SWITCH_DIRECTION>Horizontal</SWITCH_DIRECTION>
<COUNT>2</COUNT>
<ELECTRICAL_POWER>False</ELECTRICAL_POWER>
<ELECTRICAL_POWER_VAR_NAME>XMLVAR_Electrical_Trim_Disabled</ELECTRICAL_POWER_VAR_NAME>
<ELECTRICAL_POWER_VAR_TYPE>L</ELECTRICAL_POWER_VAR_TYPE>
</Parameters>
<Parameters Type="Override">
<Condition Valid="ELECTRICAL_POWER">
<True>
<ADDITIONAL_TESTS>#ADDITIONAL_TESTS# (#ELECTRICAL_POWER_VAR_TYPE#:#ELECTRICAL_POWER_VAR_NAME#) ! and</ADDITIONAL_TESTS>
</True>
</Condition>
</Parameters>
<Parameters Type="Override">
<NORMAL_MODE_PERCENT_PER_UPDATE process="Float">#NORMAL_INC_DEGREES# #TRIM_LIMIT# / 100 *</NORMAL_MODE_PERCENT_PER_UPDATE>
<FAST_MODE_PERCENT_PER_UPDATE process="Float">#NORMAL_INC_DEGREES# #TRIM_LIMIT# / #FAST_MODE_SCALE# * 100 *</FAST_MODE_PERCENT_PER_UPDATE>
<STATE0_TEST>(O:_TrimDelta) 0 ></STATE0_TEST>
<STATE1_TEST>(O:_TrimDelta) 0 ==</STATE1_TEST>
<STATE2_TEST>(O:_TrimDelta) 0 <</STATE2_TEST>
<Condition Valid="LOCK_NODE_ID">
<True>
<CODE_POS_0_VERIF>(#VAR_SCOPE_TRIM_LOCK_UNLOCKED#:#VAR_NAME_TRIM_LOCK_UNLOCKED#)</CODE_POS_0_VERIF>
<CODE_POS_2_VERIF>(#VAR_SCOPE_TRIM_LOCK_UNLOCKED#:#VAR_NAME_TRIM_LOCK_UNLOCKED#)</CODE_POS_2_VERIF>
</True>
</Condition>
</Parameters>
<Condition Valid="LOCK_NODE_ID">
<True>
<Component ID="#LOCK_NODE_ID#" Node="#LOCK_NODE_ID#">
<UseTemplate Name="ASOBO_GT_Switch_Code">
<ANIM_NAME>#LOCK_ANIM_NAME#</ANIM_NAME>
<LEFT_SINGLE_CODE>
(#VAR_SCOPE_TRIM_LOCK_UNLOCKED#:#VAR_NAME_TRIM_LOCK_UNLOCKED#) ! (>#VAR_SCOPE_TRIM_LOCK_UNLOCKED#:#VAR_NAME_TRIM_LOCK_UNLOCKED#)
</LEFT_SINGLE_CODE>
<ANIM_CODE>
(#VAR_SCOPE_TRIM_LOCK_UNLOCKED#:#VAR_NAME_TRIM_LOCK_UNLOCKED#) 100 *
</ANIM_CODE>
</UseTemplate>
</Component>
</True>
</Condition>
<Component ID="#NODE_ID#" Node="#NODE_ID#">
<Parameters Type="Override">
<INC_STATE>0</INC_STATE>
<DEC_STATE>2</DEC_STATE>
<CODE_POS_0>
1 (>O:_TrimDelta)
1 #ADDITIONAL_TESTS# if{
#GET_TRIM# #NORMAL_MODE_PERCENT_PER_UPDATE# - #SCALE_INCREMENT# #SET_TRIM#
}
</CODE_POS_0>
<CODE_POS_1>
0 (>O:_TrimDelta)
0 (>O:_UPDATE_Count)
</CODE_POS_1>
<CODE_POS_2>
-1 (>O:_TrimDelta)
1 #ADDITIONAL_TESTS# if{
#GET_TRIM# #NORMAL_MODE_PERCENT_PER_UPDATE# + #SCALE_INCREMENT# #SET_TRIM#
}
</CODE_POS_2>
<STATE_MAX_TIMER>#MOMENTARY_MIN_DURATION#</STATE_MAX_TIMER>
<STATE0_TIMER>#MOMENTARY_MIN_DURATION#</STATE0_TIMER>
</Parameters>
<UseInputEvent ID="HANDLING"/>
<UseTemplate Name="ASOBO_GT_Update">
<FREQUENCY>#UPDATE_FREQ#</FREQUENCY>
<UPDATE_CODE>
(O:_TrimDelta) 0 != #ADDITIONAL_TESTS# if{
(O:_UPDATE_Count) #UPDATE_COUNT_BEFORE_FAST_MODE# >= if{
(O:_TrimDelta) 0 > if{
#GET_TRIM# #FAST_MODE_PERCENT_PER_UPDATE# - #SCALE_INCREMENT# #SET_TRIM#
} els{
#GET_TRIM# #FAST_MODE_PERCENT_PER_UPDATE# + #SCALE_INCREMENT# #SET_TRIM#
}
} els{
(O:_UPDATE_Count) #UPDATE_COUNT_BEFORE_REPEAT# >= if{
(O:_TrimDelta) 0 > if{
#GET_TRIM# #NORMAL_MODE_PERCENT_PER_UPDATE# - #SCALE_INCREMENT# #SET_TRIM#
} els{
#GET_TRIM# #NORMAL_MODE_PERCENT_PER_UPDATE# + #SCALE_INCREMENT# #SET_TRIM#
}
}
(O:_UPDATE_Count) 1 + (>O:_UPDATE_Count)
}
}
</UPDATE_CODE>
</UseTemplate>
<UseTemplate Name="ASOBO_GT_Switch_3States">
<MOMENTARY_SWITCH/>
</UseTemplate>
</Component>
</Template>
<Template Name="ASOBO_HANDLING_Secondary_Trim_Available_SubTemplate">
<Parameters Type="Default">
<NODE_ID>HANDLING_#INTERACTION_TYPE#_Secondary_#TRIM_NAME#Trim_Available</NODE_ID>
<ANIM_NAME>HANDLING_#INTERACTION_TYPE#_Secondary_#TRIM_NAME#Trim_Available</ANIM_NAME>
<COVER_NODE_ID>HANDLING_Switch_Secondary_#TRIM_NAME#Trim_Available_Cover</COVER_NODE_ID>
<COVER_ANIM_NAME>HANDLING_Switch_Secondary_#TRIM_NAME#Trim_Available_Cover</COVER_ANIM_NAME>
<PART_ID>HANDLING_#INTERACTION_TYPE#_Secondary_#TRIM_NAME#Trim_Available</PART_ID>
<Switch Param="INTERACTION_TYPE">
<Case Value="Push">
<COUNT>2</COUNT>
<WWISE_EVENT_1>secondary_trim_switch_on</WWISE_EVENT_1>
<NORMALIZED_TIME_1>0.1</NORMALIZED_TIME_1>
<WWISE_EVENT_2>secondary_trim_switch_off</WWISE_EVENT_2>
<NORMALIZED_TIME_2>0.5</NORMALIZED_TIME_2>
</Case>
</Switch>
<Switch Param="TRIM_NAME">
<Case Value="Elevator">
<TT_DESCRIPTION_ID>@TT_Package.HANDLING_PUSH_ELEVATORTRIM_SECONDARY_ACTION_SET</TT_DESCRIPTION_ID>
<TOOLTIP_TITLE>@TT_Package.HANDLING_PUSH_ELEVATORTRIM_SECONDARY_TITLE</TOOLTIP_TITLE>
</Case>
</Switch>
</Parameters>
<Parameters Type="Override">
<BTN_ID>Secondary_#TRIM_NAME#Trim_Available</BTN_ID>
</Parameters>
<Switch Param="INTERACTION_TYPE">
<Case Value="Push">
<UseTemplate Name="ASOBO_GT_Push_Button_Airliner">
<INPUT_EVENT_ID>HANDLING</INPUT_EVENT_ID>
<TOOLTIP_ENTRY_0>HANDLING_#BTN_ID#</TOOLTIP_ENTRY_0>
<SET_STATE_EXTERNAL>p0 (>O:XMLVAR_#BTN_ID#)</SET_STATE_EXTERNAL>
<GET_STATE_EXTERNAL>(O:XMLVAR_#BTN_ID#) sp0</GET_STATE_EXTERNAL>
<SIM_STATE_IS_ON_EXTERNAL>l0</SIM_STATE_IS_ON_EXTERNAL>
<SEQ1_EMISSIVE_CODE>(B:HANDLING_#BTN_ID#, Bool)</SEQ1_EMISSIVE_CODE>
<SEQ2_EMISSIVE_CODE>(B:HANDLING_#BTN_ID#, Bool) !</SEQ2_EMISSIVE_CODE>
<LEFT_SINGLE_CODE>(>B:HANDLING_#BTN_ID#_Toggle)</LEFT_SINGLE_CODE>
</UseTemplate>
</Case>
</Switch>
</Template>
<Template Name="ASOBO_HANDLING_Spoilers_Int_SubTemplate">
<Parameters Type="Default">
<ANIM_NAME>HANDLING_#INTERACTION_TYPE#_Spoilers</ANIM_NAME>
<NODE_ID>HANDLING_#INTERACTION_TYPE#_Spoilers</NODE_ID>
<PART_ID>HANDLING_#INTERACTION_TYPE#_Spoilers</PART_ID>
<WWISE_PREFIX>spoilers</WWISE_PREFIX>
<RETRACT_ARMED_FULL>False</RETRACT_ARMED_FULL>
<POS_DOWN>1</POS_DOWN>
<POS_ARM>0</POS_ARM>
<Switch Param="INTERACTION_TYPE">
<Case Value="Lever">
<DRAG_AXIS_SCALE>100</DRAG_AXIS_SCALE>
<DRAG_SPEED>30</DRAG_SPEED>
<Condition Valid="USE_LOCK">
<TT_ICON_LOCK>MOVE_Y</TT_ICON_LOCK>
<WWISE_EVENT_LOCK_1>lever_spoiler_lock_on</WWISE_EVENT_LOCK_1>
<WWISE_EVENT_LOCK_2>lever_spoiler_lock_off</WWISE_EVENT_LOCK_2>
<LOCK_NODE_ID>HANDLING_Lever_Spoilers_Lock</LOCK_NODE_ID>
<LOCK_ANIM_NAME>HANDLING_Lever_Spoilers_Lock</LOCK_ANIM_NAME>
<LOCK_VAR_SCOPE>I</LOCK_VAR_SCOPE>
<LOCK_VAR_NAME>XMLVAR_LeverSpoilerLocked</LOCK_VAR_NAME>
<TOOLTIP_SPOILERS_LOCK_TITLE>@TT_Package.HANDLING_LEVER_SPOILERS_LOCK_TITLE</TOOLTIP_SPOILERS_LOCK_TITLE>
<TT_DESCRIPTION_ID_SPOILERS_LOCK>@TT_Package.HANDLING_LEVER_SPOILERS_LOCK_ACTION</TT_DESCRIPTION_ID_SPOILERS_LOCK>
</Condition>
<Switch Param="TYPE">
<Case Value="AIRLINER">
<Condition Valid="PHYSICAL_AUTOSPOILER">
<True>
<ARMED_STATE_TEST>(A:SPOILERS ARMED, Bool) (A:SPOILERS HANDLE POSITION, Percent over 100) 0 == and</ARMED_STATE_TEST>
</True>
<False>
<ARMED_STATE_TEST>(A:SPOILERS ARMED, Bool)</ARMED_STATE_TEST>
</False>
</Condition>
<ANIM_TRIGGER_COUNT>3</ANIM_TRIGGER_COUNT>
<STEPS_NUMBER>3</STEPS_NUMBER>
<USE_GATES>True</USE_GATES>
<ANIM_LENGTH>100</ANIM_LENGTH>
</Case>
</Switch>
<WWISE_EVENT>lever_speedbrakes</WWISE_EVENT>
<MIN_VALUE>0</MIN_VALUE>
<MAX_VALUE>@16k</MAX_VALUE>
<LEVER_ANIM_LAG>100</LEVER_ANIM_LAG>
</Case>
<Case Value="Switch">
<TIME_TO_FULL_RANGE_SEC>2</TIME_TO_FULL_RANGE_SEC>
<REPEAT_FREQUENCY>10</REPEAT_FREQUENCY>
<MOMENTARY_TIMER>0.1</MOMENTARY_TIMER>
<POS_DEC>0</POS_DEC>
<POS_STANDBY>1</POS_STANDBY>
<POS_INC>2</POS_INC>
<ADDITIONAL_TESTS/>
<Switch Param="PUSH_TYPE">
<Case Value="EXTEND_FULL">
<ANIM_NAME_PUSH>HANDLING_#INTERACTION_TYPE#_Spoilers_Push</ANIM_NAME_PUSH>
<INVERT_ANIM_PUSH>False</INVERT_ANIM_PUSH>
</Case>
</Switch>
</Case>
</Switch>
<TT_DESCRIPTION_ID>@TT_Package.HANDLING_LEVER_SPOILERS_ACTION</TT_DESCRIPTION_ID>
<TT_DESCRIPTION_ID_EXTEND>@TT_Package.HANDLING_LEVER_SPOILERS_ACTION_EXTEND</TT_DESCRIPTION_ID_EXTEND>
<TOOLTIP_TITLE>@TT_Package.HANDLING_LEVER_SPOILERS_TITLE</TOOLTIP_TITLE>
</Parameters>
<Parameters Type="Override">
<Switch Param="INTERACTION_TYPE">
<Case Value="Switch">
<INCREMENT Process="Int">16384 #TIME_TO_FULL_RANGE_SEC# / #REPEAT_FREQUENCY# /</INCREMENT>
<MOMENTARY_SWITCH/>
<STATE0_TIMER>#MOMENTARY_TIMER#</STATE0_TIMER>
<STATE_MAX_TIMER>#MOMENTARY_TIMER#</STATE_MAX_TIMER>
<STATE_STANDBY>0</STATE_STANDBY>
<STATE_INC>1</STATE_INC>
<STATE_DEC>2</STATE_DEC>
<Switch Param="PUSH_TYPE">
<Case Value="EXTEND_FULL">
<ADDITIONAL_TESTS>#ADDITIONAL_TESTS# (B:HANDLING_Spoilers_Extend, Bool) ! and</ADDITIONAL_TESTS>
</Case>
</Switch>
</Case>
</Switch>
</Parameters>
<Switch Param="INTERACTION_TYPE">
<Case Value="Lever">
<Condition Valid="USE_GATES">
<Condition Valid="RETRACT_ARMED_FULL">
<True>
<UseTemplate Name="ASOBO_HANDLING_Push_Event_Base_Template">
<IE_NAME>Spoilers_Arm</IE_NAME>
<SET_STATE_EXTERNAL>p0 ! (A:SPOILERS HANDLE POSITION, position 16k) 0 == and (>K:SPOILERS_ARM_SET)</SET_STATE_EXTERNAL>
<GET_STATE_EXTERNAL>(A:SPOILERS HANDLE POSITION, position 16k) 0 > if{ 0 (>K:SPOILERS_ARM_SET) } (A:SPOILERS ARMED, Bool) sp0 </GET_STATE_EXTERNAL>
<STR_STATE_ON>Armed</STR_STATE_ON>
<STR_STATE_OFF>Standby</STR_STATE_OFF>
<TT_VALUE_ON>(R:1:@TT_Package.GT_STATE_ARMED)</TT_VALUE_ON>
<TT_VALUE_OFF>(R:1:@TT_Package.GT_STATE_STANDBY)</TT_VALUE_OFF>
<SIMVAR_TO_WATCH_0>SPOILERS ARMED</SIMVAR_TO_WATCH_0>
<SIMVAR_TO_WATCH_1>SPOILERS HANDLE POSITION</SIMVAR_TO_WATCH_1>
</UseTemplate>
</True>
<False>
<UseTemplate Name="ASOBO_HANDLING_Push_Event_Base_Template">
<IE_NAME>Spoilers_Arm</IE_NAME>
<SET_STATE_EXTERNAL>p0 (A:SPOILERS HANDLE POSITION, position 16k) 0 == and (>K:SPOILERS_ARM_SET)</SET_STATE_EXTERNAL>
<GET_STATE_EXTERNAL>(A:SPOILERS HANDLE POSITION, position 16k) 0 > if{ 0 (>K:SPOILERS_ARM_SET) } (A:SPOILERS ARMED, Bool) sp0 </GET_STATE_EXTERNAL>
<STR_STATE_ON>Armed</STR_STATE_ON>
<STR_STATE_OFF>Standby</STR_STATE_OFF>
<TT_VALUE_ON>(R:1:@TT_Package.GT_STATE_ARMED)</TT_VALUE_ON>
<TT_VALUE_OFF>(R:1:@TT_Package.GT_STATE_STANDBY)</TT_VALUE_OFF>
<SIMVAR_TO_WATCH_0>SPOILERS ARMED</SIMVAR_TO_WATCH_0>
<SIMVAR_TO_WATCH_1>SPOILERS HANDLE POSITION</SIMVAR_TO_WATCH_1>
</UseTemplate>
</False>
</Condition>
</Condition>
<UseTemplate Name="ASOBO_HANDLING_Base_Template">
<IE_NAME>Spoilers</IE_NAME>
<GATE_DIRECTION>0</GATE_DIRECTION>
<DONT_SYNC_DRAG_TO_ANIM>True</DONT_SYNC_DRAG_TO_ANIM>
<DRAG_ANIM_NAME>#ANIM_NAME#</DRAG_ANIM_NAME>
<DRAG_NODE_ID>#NODE_ID#</DRAG_NODE_ID>
<GET_TT_VALUE_STATE>(A:SPOILERS ARMED, Bool) sp0 (A:SPOILERS HANDLE POSITION, Percent) sp1</GET_TT_VALUE_STATE>
<FORMAT_VALUE>l0 if{ (R:1:@TT_Package.GT_STATE_ARMED) } els{ l1 '%.1f%%' @sprintf }</FORMAT_VALUE>
<SIMVAR_TO_WATCH_0>SPOILERS HANDLE POSITION</SIMVAR_TO_WATCH_0>
<GET_STATE_EXTERNAL>(A:SPOILERS HANDLE POSITION, position 16k)</GET_STATE_EXTERNAL>
<SET_STATE_EXTERNAL>(>K:SPOILERS_SET)</SET_STATE_EXTERNAL>
<Condition Valid="USE_LOCK">
<ON_BEFORE_SET_CODE>(B:HANDLING_Spoilers_Lock, Bool) if{ quit } </ON_BEFORE_SET_CODE>
</Condition>
<STATE_TO_POS_EXTERNAL>@16k / 100 *</STATE_TO_POS_EXTERNAL>
<INC_PARAM_0 Process="Int">@16k 10 /</INC_PARAM_0>
<DEC_PARAM_0 Process="Int">@16k 10 /</DEC_PARAM_0>
<Condition Valid="USE_GATES">
<True>
<TEMPLATE_TO_USE>ASOBO_GT_Lever_DraggingYAxis_Gates</TEMPLATE_TO_USE>
<DRAG_CODE>
(O:Position) 1 < s0 (>B:HANDLING_Spoilers_Arm_Set)
0 (O:Position) 1 - #STEPS_NUMBER# 1 - / @16k * l0 ? (>B:HANDLING_Spoilers_Set)
</DRAG_CODE>
<Condition Valid="RETRACT_ARMED_FULL">
<FORMAT_VALUE>l0 if{ (R:1:@TT_Package.GT_STATE_ARMED) } els{ l1 0 == if{ (R:1:@TT_Package.GT_STATE_DOWN) } els{ l1 '%.1f%%' @sprintf } }</FORMAT_VALUE>
<!-- <DRAG_CODE> -->
<!-- (O:Position) #POS_ARM# == s0 (>B:HANDLING_Spoilers_Arm_Set) -->
<!-- 0 (O:Position) 1 - #STEPS_NUMBER# 1 - / @16k * l0 ? (>B:HANDLING_Spoilers_Set) -->
<!-- </DRAG_CODE> -->
</Condition>
<Condition NotEmpty="OVERRIDE_ANIM_CODE">
<False>
<Condition Valid="RETRACT_ARMED_FULL">
<True>
<OVERRIDE_ANIM_CODE>(A:SPOILERS ARMED, Bool) if{ #POS_ARM# #ANIM_LENGTH# #STEPS_NUMBER# / * } els{ (B:HANDLING_Spoilers, percent over 100) s0 0 == if{ #POS_DOWN# #STEPS_NUMBER# / } els{ l0 #STEPS_NUMBER# 1 - #STEPS_NUMBER# / * 1 #STEPS_NUMBER# / + #ANIM_LENGTH# * } }</OVERRIDE_ANIM_CODE>
</True>
<False>
<OVERRIDE_ANIM_CODE>(A:SPOILERS ARMED, Bool) if{ 0 } els{ (B:HANDLING_Spoilers, percent over 100) #STEPS_NUMBER# 1 - #STEPS_NUMBER# / * 1 #STEPS_NUMBER# / + #ANIM_LENGTH# * }</OVERRIDE_ANIM_CODE>
</False>
</Condition>
</False>
</Condition>
<ON_AFTER_INIT_CODE> 0 (A:SPOILERS HANDLE POSITION, percent over 100) #STEPS_NUMBER# 1 - * 1 + (A:SPOILERS ARMED, Bool) ? (>O:Position)</ON_AFTER_INIT_CODE>
</True>
<False>
<GET_TT_VALUE_STATE>(A:SPOILERS HANDLE POSITION, Percent)</GET_TT_VALUE_STATE>
<DRAG_VALUE_TO_EVENT_SET>@16k *</DRAG_VALUE_TO_EVENT_SET>
<Condition Valid="USE_LOCK">
<True>
<FORMAT_VALUE>sp0 (B:HANDLING_Spoilers_Lock, Bool) if{ (R:1:@TT_Package.GT_STATE_LOCKED) } els{ l0 '%.1f%%' @sprintf }</FORMAT_VALUE>
</True>
<False>
<FORMAT_VALUE>'%.1f%%' @sprintf</FORMAT_VALUE>
</False>
</Condition>
</False>
</Condition>
<ANIM_LAG>#LEVER_ANIM_LAG#</ANIM_LAG>
</UseTemplate>
<Condition Valid="USE_LOCK">
<UseTemplate Name="ASOBO_HANDLING_Base_Template">
<INTERACTION_TYPE>Switch</INTERACTION_TYPE>
<TT_ICON>#TT_ICON_LOCK#</TT_ICON>
<IE_NAME>Spoilers_Lock</IE_NAME>
<NODE_ID>#LOCK_NODE_ID#</NODE_ID>
<ANIM_NAME>#LOCK_ANIM_NAME#</ANIM_NAME>
<TOOLTIP_TITLE>#TOOLTIP_SPOILERS_LOCK_TITLETOOLTIP_SPOILERS_LOCK_TITLE#</TOOLTIP_TITLE>
<TT_DESCRIPTION_ID>#TT_DESCRIPTION_ID_SPOILERS_LOCK#</TT_DESCRIPTION_ID>
<WWISE_EVENT_1>#WWISE_EVENT_LOCK_1#</WWISE_EVENT_1>
<WWISE_EVENT_2>#WWISE_EVENT_LOCK_2#</WWISE_EVENT_2>
<SIMVAR_TO_WATCH_0>SPOILERS HANDLE POSITION</SIMVAR_TO_WATCH_0>
<SET_STATE_EXTERNAL>p0 (A:SPOILERS HANDLE POSITION, percent) 0 == and (>#LOCK_VAR_SCOPE#:#LOCK_VAR_NAME#)</SET_STATE_EXTERNAL>
<GET_STATE_EXTERNAL>(A:SPOILERS HANDLE POSITION, percent) 0 > if{ 0 (>#LOCK_VAR_SCOPE#:#LOCK_VAR_NAME#) (#LOCK_VAR_SCOPE#:#LOCK_VAR_NAME#) sp0</GET_STATE_EXTERNAL>
<COMP_INIT_CODE>(>B:HANDLING_Spoilers_Lock_On)</COMP_INIT_CODE>
<Condition Valid="INVERT_LOCK_ANIM">
<INVERT_ANIM>#INVERT_LOCK_ANIM#</INVERT_ANIM>
</Condition>
<CHECK_STATE_HAS_CHANGED>True</CHECK_STATE_HAS_CHANGED>
</UseTemplate>
</Condition>
</Case>
<Case Value="Switch">
<Switch Param="PUSH_TYPE">
<Case Value="EXTEND_FULL">
<UseTemplate Name="ASOBO_HANDLING_Push_Event_Base_Template">
<IE_NAME>Spoilers_Extend</IE_NAME>
<SET_STATE_EXTERNAL>p0 (>O:XMLVAR_Spoilers_Extended) p0 #ADDITIONAL_TESTS# if{ @16k (>K:SPOILERS_SET) }</SET_STATE_EXTERNAL>
<GET_STATE_EXTERNAL>(O:XMLVAR_Spoilers_Extended) s0 #ADDITIONAL_TESTS# if{ (A:SPOILERS HANDLE POSITION, Position 16k) @16k != if{ @16k (>K:SPOILERS_SET) } }</GET_STATE_EXTERNAL>
<STR_STATE_ON>Extended</STR_STATE_ON>
<STR_STATE_OFF>Standby</STR_STATE_OFF>
<TT_VALUE_ON>(R:1:@TT_Package.GT_STATE_EXTENDED)</TT_VALUE_ON>
<TT_VALUE_OFF>(R:1:@TT_Package.GT_STATE_STANDBY)</TT_VALUE_OFF>
<TT_DESCRIPTION_ID>#TT_DESCRIPTION_ID_EXTEND#</TT_DESCRIPTION_ID>
<SIMVAR_TO_WATCH_0>SPOILERS HANDLE POSITION</SIMVAR_TO_WATCH_0>
</UseTemplate>
</Case>
</Switch>
<UseTemplate Name="ASOBO_HANDLING_Base_Template">
<IE_NAME>Spoilers</IE_NAME>
<NUM_STATES>3</NUM_STATES>
<COMP_UPDATE_CODE>
(B:HANDLING_Spoilers) #POS_STANDBY# != #ADDITIONAL_TESTS# if{
#INCREMENT# -#INCREMENT# (B:HANDLING_Spoilers) #POS_INC# == ? (A:SPOILERS HANDLE POSITION, Position 16k) + @16k min 0 max (>K:SPOILERS_SET)
}
</COMP_UPDATE_CODE>
<FREQUENCY>#REPEAT_FREQUENCY#</FREQUENCY>
<Switch Param="PUSH_TYPE">
<Case Value="EXTEND_FULL">
<IE_ID_EXTERNAL_0>Spoilers_Extend</IE_ID_EXTERNAL_0>
<ON_PRIMARY_EVENT>(B:HANDLING_Spoilers) #POS_STANDBY# == if{ (>B:HANDLING_Spoilers_Extend_Toggle) }</ON_PRIMARY_EVENT>
<ANIM_CODE_PUSH>(B:HANDLING_Spoilers_Extend, Bool) 100 *</ANIM_CODE_PUSH>
<OVERRIDE_ANIM_CODE>(B:HANDLING_Spoilers) 100 *</OVERRIDE_ANIM_CODE>
<ON_STATE_CHANGED_EXTERNAL_CODE>(O:HANDLING_Spoilers_Position) #POS_STANDBY# != (B:HANDLING_Spoilers_Extend, Bool) and if{ #POS_STANDBY# (>O:HANDLING_Spoilers_Position) }</ON_STATE_CHANGED_EXTERNAL_CODE>
<WWISE_PUSH_EVENT_1>spoilers_switch_push_on</WWISE_PUSH_EVENT_1>
<WWISE_PUSH_EVENT_2>spoilers_switch_push_off</WWISE_PUSH_EVENT_2>
</Case>
</Switch>
<SET_STATE_#POS_INC#>#STATE_INC# (>O:XMLVAR_Spoilers_Switch_Mode)</SET_STATE_#POS_INC#>
<SET_STATE_#POS_STANDBY#>#STATE_STANDBY# (>O:XMLVAR_Spoilers_Switch_Mode)</SET_STATE_#POS_STANDBY#>
<SET_STATE_#POS_DEC#>#STATE_DEC# (>O:XMLVAR_Spoilers_Switch_Mode)</SET_STATE_#POS_DEC#>
<TT_VALUE>(A:SPOILERS HANDLE POSITION, percent) '%d%%' @sprintf</TT_VALUE>
<TT_VALUE_IS_DYNAMIC>True</TT_VALUE_IS_DYNAMIC>
<STR_STATE_#POS_INC#>Deploy</STR_STATE_#POS_INC#>
<STR_STATE_#POS_STANDBY#>Standby</STR_STATE_#POS_STANDBY#>
<STR_STATE_#POS_DEC#>Retract</STR_STATE_#POS_DEC#>
<GET_STATE_EXTERNAL>(O:XMLVAR_Spoilers_Switch_Mode) sp0</GET_STATE_EXTERNAL>
<ENUM_VAL_TO_POS_EXTERNAL>#POS_STANDBY# sp1
l0 #STATE_STANDBY# == if{ #POS_STANDBY# sp1 g1 }
l0 #STATE_INC# == if{ #POS_INC# sp1 g1 }
l0 #STATE_DEC# == if{ #POS_DEC# sp1 g1 } :1 l1
</ENUM_VAL_TO_POS_EXTERNAL>
</UseTemplate>
</Case>
</Switch>
</Template>
<!--
Require INTERACTION_TYPE value:
- LEVER case (classic flaps lever) :
- BUTTON case :
require MAX_FLAPS_DEGREE (plane fixed caracteristic)
and SELECTED_FLAPS_DEGREE (choice linked to the button)
-->
<Template Name="ASOBO_HANDLING_Flaps_SubTemplate">
<Switch Param="INTERACTION_TYPE">
<Case Value="Lever">
<UseTemplate Name="ASOBO_HANDLING_Flaps_Lever_SubTemplate"/>
</Case>
<Case Value="Push">
<UseTemplate Name="ASOBO_HANDLING_Flaps_Button_SubTemplate"/>
</Case>
</Switch>
</Template>
<Template Name="ASOBO_HANDLING_Flaps_Lever_SubTemplate">
<Parameters Type="Default">
<Condition Valid="HAS_BUTTON">
<True>
<ANIM_NAME_LEVER>HANDLING_Lever_Flaps</ANIM_NAME_LEVER>
<ANIM_NAME_BUTTON>HANDLING_Lever_Button_Flaps</ANIM_NAME_BUTTON>
<NODE_ID>HANDLING_Lever_Flaps</NODE_ID>
<PART_ID>HANDLING_Lever_Flaps</PART_ID>
<ANIM_TRIGGER_COUNT>1</ANIM_TRIGGER_COUNT>
<ANIM_SPEED>5</ANIM_SPEED>
<DRAG_DELTA>0.1</DRAG_DELTA>
<ANIMREF_ID>1</ANIMREF_ID>
<AXIS>Y</AXIS>
<MAX_HANDLE_INDEX>(A:FLAPS NUM HANDLE POSITIONS:1, Number)</MAX_HANDLE_INDEX>
<MIN_DELTA>0.25</MIN_DELTA>
<DONT_SYNC_DRAG_TO_ANIM/>
<DONT_CREATE_SOUND_ANIM_TRIGGERS/>
</True>
<False>
<ANIM_NAME>HANDLING_Lever_Flaps</ANIM_NAME>
<NODE_ID>HANDLING_Lever_Flaps</NODE_ID>
<PART_ID>HANDLING_Lever_Flaps</PART_ID>
<ANIM_TRIGGER_COUNT>2</ANIM_TRIGGER_COUNT>
<MIN_DELTA>0.25</MIN_DELTA>
<MAX_HANDLE_INDEX>2</MAX_HANDLE_INDEX>
<ANIM_LAG>400</ANIM_LAG>
<HELPID>HELPID_GAUGE_FLAPS_SWITCH</HELPID>
<ANIMREF_ID>0</ANIMREF_ID>
</False>
</Condition>
<ANIMTIP_0_ON_PERCENT>0</ANIMTIP_0_ON_PERCENT>
<ANIMTIP_1_ON_PERCENT>0.5</ANIMTIP_1_ON_PERCENT>
<ANIMTIP_2_ON_PERCENT>1</ANIMTIP_2_ON_PERCENT>
<ANIMTIP_0>TT:COCKPIT.TOOLTIPS.FLAPS_LEVER_UP</ANIMTIP_0>
<ANIMTIP_1>TT:COCKPIT.TOOLTIPS.FLAPS_LEVER_TO</ANIMTIP_1>
<ANIMTIP_2>TT:COCKPIT.TOOLTIPS.FLAPS_LEVER_LDG</ANIMTIP_2>
<TOOLTIP_FLAPS_TITLE>@TT_Package.HANDLING_LEVER_FLAPS_TITLE</TOOLTIP_FLAPS_TITLE>
</Parameters>
<Parameters Type="Override">
<TOOLTIP_TITLE>#TOOLTIP_FLAPS_TITLE#</TOOLTIP_TITLE>
<TOOLTIP_ENTRY_0>HANDLING_Flaps</TOOLTIP_ENTRY_0>
<ANIM_CODE>(B:HANDLING_Flaps)</ANIM_CODE>
<STEP_INCREMENT Process="Int">16384 (A:FLAPS NUM HANDLE POSITIONS, Number) /</STEP_INCREMENT>
<Condition Valid="HAS_BUTTON">
<False>
<ANIM_NAME_LEVER>#ANIM_NAME#</ANIM_NAME_LEVER>
</False>
</Condition>
</Parameters>
<Parameters Type="Override">
<Condition Valid="INVERT_INTERACTION">
<True>
<DRAG_POSITION>1 (M:DragPercent) - 16384 *</DRAG_POSITION>
<INVERT_ANIM>True</INVERT_ANIM>
</True>
<False>
<DRAG_POSITION>(M:DragPercent) 16384 *</DRAG_POSITION>
</False>
</Condition>
</Parameters>
<Component ID="#NODE_ID#" Node="#NODE_ID#">
<Condition Valid="HAS_BUTTON">
<UseTemplate Name="ASOBO_GT_Anim_Code">
<ANIM_NAME>#ANIM_NAME_BUTTON#</ANIM_NAME>
<ANIM_CODE>
(O:XMLVAR_Interacting_With_Lever) 100 *
</ANIM_CODE>
<Condition Check="BUTTON_ANIM_LAG">
<ANIM_LAG>#BUTTON_ANIM_LAG#</ANIM_LAG>
</Condition>
<ANIM_LENGTH>100</ANIM_LENGTH>
</UseTemplate>
</Condition>
<UseInputEvent ID="HANDLING">
<FLAPS_ID>1</FLAPS_ID>
</UseInputEvent>
<Condition Check="USE_TRAJECTORY_DRAG_MODE">
<True>
<UseTemplate Name="ASOBO_GT_Lever_DraggingWheelLeftDrag_Axis">
<ANIM_NAME>#ANIM_NAME_LEVER#</ANIM_NAME>
<DRAG_ANIM_NAME>#ANIM_NAME_LEVER#</DRAG_ANIM_NAME>
<Condition Valid="HAS_BUTTON">
<LOCK_CODE>1 (>O:XMLVAR_Interacting_With_Lever)</LOCK_CODE>
<UNLOCK_CODE>0 (>O:XMLVAR_Interacting_With_Lever)</UNLOCK_CODE>
</Condition>
<DONT_SYNC_DRAG_TO_ANIM/>
<NO_ARROWS/>
<CURSOR>Hand</CURSOR>
<HELPID>HELPID_GAUGE_FLAPS_SWITCH</HELPID>
<TOOLTIPID>TOOLTIPTEXT_FLAPS_SWITCH</TOOLTIPID>
<DRAG_SIMVAR>FLAPS HANDLE PERCENT</DRAG_SIMVAR>
<DRAG_CODE>#DRAG_POSITION# (>B:HANDLING_Flaps_Set)</DRAG_CODE>
<POSITIVE_AXIS_CODE>#STEP_INCREMENT# (>B:HANDLING_Flaps_Inc)</POSITIVE_AXIS_CODE>
<NEGATIVE_AXIS_CODE>#STEP_INCREMENT# (>B:HANDLING_Flaps_Dec)</NEGATIVE_AXIS_CODE>
</UseTemplate>
</True>
<False>
<UseTemplate Name="ASOBO_GT_Lever_DraggingYAxis_Code">
<ANIM_NAME>#ANIM_NAME_LEVER#</ANIM_NAME>
<Condition Valid="HAS_BUTTON">
<LEFT_SINGLE_CODE>1 (>O:XMLVAR_Interacting_With_Lever)</LEFT_SINGLE_CODE>
<LEFT_RELEASE_CODE>0 (>O:XMLVAR_Interacting_With_Lever)</LEFT_RELEASE_CODE>
</Condition>
<ANIM_LENGTH>100</ANIM_LENGTH>
<UP_CODE>#STEP_INCREMENT# (>B:HANDLING_Flaps_Dec)</UP_CODE>
<DOWN_CODE>#STEP_INCREMENT# (>B:HANDLING_Flaps_Inc)</DOWN_CODE>
<DRAG_DELTA>0.05</DRAG_DELTA>
<DRAG_SPEED>0.5</DRAG_SPEED>
<IS_LOOPING/>
</UseTemplate>
</False>
</Condition>
<UseTemplate Name="ASOBO_GT_AnimTriggers_SoundEvents_Same">
<WWISE_EVENT>lever_flaps</WWISE_EVENT>
<COUNT>#ANIM_TRIGGER_COUNT#</COUNT>
<ANIM_NAME>#ANIM_NAME_LEVER#</ANIM_NAME>
</UseTemplate>
<Condition Valid="HAS_BUTTON">
<UseTemplate Name="ASOBO_GT_AnimTriggers_2SoundEvents">
<ANIM_NAME>#ANIM_NAME_BUTTON#</ANIM_NAME>
<WWISE_EVENT_1>flaps_lever_button_on</WWISE_EVENT_1>
<NORMALIZED_TIME_1>0.1</NORMALIZED_TIME_1>
<DIRECTION_1>Forward</DIRECTION_1>
<WWISE_EVENT_2>flaps_lever_button_off</WWISE_EVENT_2>
<NORMALIZED_TIME_2>0.9</NORMALIZED_TIME_2>
<DIRECTION_2>Backward</DIRECTION_2>
</UseTemplate>
<UseTemplate Name="ASOBO_GT_Visibility_Code">
<VISIBILITY_CODE>(L:XMLVAR_LeverFlapsHidden) !</VISIBILITY_CODE>
</UseTemplate>
</Condition>
</Component>
</Template>
<Template Name="ASOBO_HANDLING_Flaps_Button_SubTemplate">
<Parameters Type="Default">
<ANIM_NAME>HANDLING_Button_Flaps</ANIM_NAME>
<NODE_ID>HANDLING_Button_Flaps</NODE_ID>
<PART_ID>HANDLING_Button_Flaps</PART_ID>
<MAX_FLAPS_DEGREE>45</MAX_FLAPS_DEGREE>
<SELECTED_FLAPS_DEGREE>0</SELECTED_FLAPS_DEGREE>
<WWISE_PREFIX>flaps</WWISE_PREFIX>
</Parameters>
<Parameters Type="Default">
<TOOLTIP_TITLE>@TT_Package.HANDLING_BUTTON_FLAPS_TITLE</TOOLTIP_TITLE>
<TT_DESCRIPTION_ID>@TT_Package.HANDLING_BUTTON_FLAPS_ACTION</TT_DESCRIPTION_ID>
<TT_DESCRIPTION_INDEX>#SELECTED_FLAPS_DEGREE#</TT_DESCRIPTION_INDEX>
</Parameters>
<UseInputEvent ID="HANDLING">
<FLAPS_ID>1</FLAPS_ID>
</UseInputEvent>
<UseTemplate Name="ASOBO_HANDLING_Base_Template">
<IE_NAME>Flaps_Select_#SELECTED_FLAPS_DEGREE#_Degrees</IE_NAME>
<INTERACTION_TYPE>Push</INTERACTION_TYPE>
<SET_STATE_EXTERNAL>16384 #SELECTED_FLAPS_DEGREE# * #MAX_FLAPS_DEGREE# / (>B:HANDLING_Flaps_Set)</SET_STATE_EXTERNAL>
<TT_VALUE>(A:TRAILING EDGE FLAPS LEFT ANGLE, degree) '%d°' @sprintf</TT_VALUE>
<TT_VALUE_IS_DYNAMIC>True</TT_VALUE_IS_DYNAMIC>
</UseTemplate>
</Template>
<Template Name="ASOBO_HANDLING_Autobrakes_SubTemplate">
<Parameters Type="Default">
<NODE_ID>HANDLING_#INTERACTION_TYPE#_Autobrake_#ID#</NODE_ID>
<ANIM_NAME>HANDLING_#INTERACTION_TYPE#_Autobrake_#ID#</ANIM_NAME>
<PART_ID>HANDLING_#INTERACTION_TYPE#_Autobrake</PART_ID>
<Switch Param="INTERACTION_TYPE">
<Case Value="Push">
<TYPE>ON_OFF</TYPE>
<WWISE_PREFIX>autobrake</WWISE_PREFIX>
<AUTOBRAKE_LEVEL Process="Int">#ID# 1 +</AUTOBRAKE_LEVEL>
<AUTOBRAKE_RTO>0</AUTOBRAKE_RTO>
<AUTOBRAKE_OFF>1</AUTOBRAKE_OFF>
<Switch Param="ID">
<Case Value="1">
<TT_DESCRIPTION_ID>@TT_Package.LANDING_GEAR_PUSH_AUTOBKR_ACTION_LOW</TT_DESCRIPTION_ID>
</Case>
<Case Value="2">
<TT_DESCRIPTION_ID>@TT_Package.LANDING_GEAR_PUSH_AUTOBKR_ACTION_MED</TT_DESCRIPTION_ID>
</Case>
<Case Value="3">
<TT_DESCRIPTION_ID>@TT_Package.LANDING_GEAR_PUSH_AUTOBKR_ACTION_MAX</TT_DESCRIPTION_ID>
</Case>
</Switch>
<IS_AIRLINER>True</IS_AIRLINER>
<AUTODISABLE_COUNTDOWN>3</AUTODISABLE_COUNTDOWN>
<Condition Valid="DISABLED_IN_FLIGHT">
<True>
<TEST_DISABLED>(A:SIM ON GROUND, Bool) !</TEST_DISABLED>
</True>
<False>
<TEST_DISABLED>0</TEST_DISABLED>
</False>
</Condition>
</Case>
<Case Value="Knob">
<TYPE>X_STATES</TYPE>
<WWISE_PREFIX>autobrakes</WWISE_PREFIX>
<TT_DESCRIPTION_ID>@TT_Package.LANDING_GEAR_KNOB_ALT_AUTOBRAKE_ACTION</TT_DESCRIPTION_ID>
<Switch Param="AIRLINER_TYPE">
<Case Value="BOEING">
<POS_RTO>0</POS_RTO>
<POS_OFF>1</POS_OFF>
<POS_DISARM>2</POS_DISARM>
<POS_1>3</POS_1>
<POS_2>4</POS_2>
<POS_3>5</POS_3>
<POS_4>6</POS_4>
<POS_MAX_AUTO>7</POS_MAX_AUTO>
<NUM_STATES>8</NUM_STATES>
</Case>
</Switch>
</Case>
</Switch>
<TOOLTIP_TITLE>@TT_Package.LANDING_GEAR_PUSH_AUTOBKR_TITLE</TOOLTIP_TITLE>
</Parameters>
<Parameters Type="Override">
<Switch Param="TYPE">
<Case Value="ON_OFF">
<SET_SIMVAR_FROM_POSITION>
(* SwimVar pos is handled there for interactions + in update for automatic state switches *)
-1 sp0
(A:SIM ON GROUND, Bool) if{
(L:XMLVAR_Autobrake_Level_Armed) #AUTOBRAKE_OFF# == if{
#AUTOBRAKE_OFF# sp0
} els{
#AUTOBRAKE_RTO# sp0
}
} els{
(L:XMLVAR_Autobrake_Level_Armed) sp0
}
l0 -1 != l0 (A:AUTO BRAKE SWITCH CB, Enum) != and if{
l0 (>K:SET_AUTOBRAKE_CONTROL)
}
</SET_SIMVAR_FROM_POSITION>
</Case>
</Switch>
</Parameters>
<Parameters Type="Override">
<Switch Param="TYPE">
<Case Value="ON_OFF">
<LOCAL_VAR_TO_WATCH_0>XMLVAR_Autobrake_Level_Armed</LOCAL_VAR_TO_WATCH_0>
<SIMVAR_TO_WATCH_0>ANTISKID BRAKES ACTIVE</SIMVAR_TO_WATCH_0>
<SIMVAR_TO_WATCH_1>BRAKE LEFT POSITION EX1</SIMVAR_TO_WATCH_1>
<SIMVAR_TO_WATCH_2>BRAKE RIGHT POSITION EX1</SIMVAR_TO_WATCH_2>
<SET_STATE_EXTERNAL>
#TEST_DISABLED# if{
0 (>O:HANDLING_Autobrake_Level_#ID#_Position)
} els{
p0 if{
#AUTOBRAKE_LEVEL# (>L:XMLVAR_Autobrake_Level_Armed)
} els{
(L:XMLVAR_Autobrake_Level_Armed) #AUTOBRAKE_LEVEL# == if{
#AUTOBRAKE_OFF# (>L:XMLVAR_Autobrake_Level_Armed)
}
}
}
#SET_SIMVAR_FROM_POSITION#
</SET_STATE_EXTERNAL>
<!-- AUTOBRAKE system is disarmed: -->
<!-- 10 seconds after raising landing gear lever -->
<!-- When applying sufficient brake pedal deflection to one brake pedal -->
<GET_STATE_EXTERNAL>
(L:XMLVAR_Autobrake_Level_Armed) #AUTOBRAKE_LEVEL# == sp0
(A:ANTISKID BRAKES ACTIVE, Bool)
(A:BRAKE LEFT POSITION EX1, percent) 95 > (A:BRAKE RIGHT POSITION EX1, percent) 95 > or ! and sp1
l0 l1 ! and if{ #AUTOBRAKE_OFF# (>L:XMLVAR_Autobrake_Level_Armed) } l0 l1 and sp0
</GET_STATE_EXTERNAL>
<Condition Check="ID" Match="1">
<COMP_INIT_CODE>(A:AUTO BRAKE SWITCH CB, Enum) (>L:XMLVAR_Autobrake_Level_Armed) (A:GEAR HANDLE POSITION, Bool) (>O:_Gear_Position) #SET_SIMVAR_FROM_POSITION#</COMP_INIT_CODE>
<COMP_UPDATE_CODE>
(* Handle disarming after landing gear up *)
(O:_Countdown_Disable_Autobrake) 0 > if{
(O:_Countdown_Disable_Autobrake) 1 - (>O:_Countdown_Disable_Autobrake)
(O:_Countdown_Disable_Autobrake) 0 <= if{
1 (>K:SET_AUTOBRAKE_CONTROL)
#AUTOBRAKE_OFF# (>L:XMLVAR_Autobrake_Level_Armed)
}
}
(L:XMLVAR_Autobrake_Level_Armed) #AUTOBRAKE_OFF# > if{
(A:GEAR HANDLE POSITION, Bool) s0 (O:_Gear_Position) != sp1 l0 (>O:_Gear_Position)
l1 l0 ! and if{
#AUTODISABLE_COUNTDOWN# (>O:_Countdown_Disable_Autobrake)
}
}
</COMP_UPDATE_CODE>
</Condition>
<Condition Valid="IS_AIRLINER">
<SEQ1_EMISSIVE_CODE>(B:HANDLING_Autobrake_Level_#ID#, Bool) (A:AUTOBRAKES ACTIVE, Bool) (A:REJECTED TAKEOFF BRAKES ACTIVE, Bool) or and</SEQ1_EMISSIVE_CODE>
<SEQ2_EMISSIVE_CODE>(B:HANDLING_Autobrake_Level_#ID#, Bool)</SEQ2_EMISSIVE_CODE>
</Condition>
</Case>
<Case Value="X_STATES">
<KNOB_TYPE>X_STATES</KNOB_TYPE>
<SIMVAR_TO_WATCH_0>AUTO BRAKE SWITCH CB</SIMVAR_TO_WATCH_0>
<Switch Param="AIRLINER_TYPE">
<Case Value="BOEING">
<STR_STATE_#POS_RTO#>RTO</STR_STATE_#POS_RTO#>
<STR_STATE_#POS_OFF#>Off</STR_STATE_#POS_OFF#>
<STR_STATE_#POS_DISARM#>Disarm</STR_STATE_#POS_DISARM#>
<STR_STATE_#POS_1#>Level_1</STR_STATE_#POS_1#>
<STR_STATE_#POS_2#>Level_2</STR_STATE_#POS_2#>
<STR_STATE_#POS_3#>Level_3</STR_STATE_#POS_3#>
<STR_STATE_#POS_4#>Level_4</STR_STATE_#POS_4#>
<STR_STATE_#POS_MAX_AUTO#>Max_Auto</STR_STATE_#POS_MAX_AUTO#>
<TT_VALUE_#POS_RTO#>@TT_Package.GT_STATE_RTO</TT_VALUE_#POS_RTO#>
<TT_VALUE_#POS_OFF#>@TT_Package.GT_STATE_OFF</TT_VALUE_#POS_OFF#>
<TT_VALUE_#POS_DISARM#>@TT_Package.GT_STATE_DISARM</TT_VALUE_#POS_DISARM#>
<TT_VALUE_#POS_1#>'1'</TT_VALUE_#POS_1#><TT_VALUE_#POS_1#_IS_DYNAMIC>True</TT_VALUE_#POS_1#_IS_DYNAMIC>
<TT_VALUE_#POS_2#>'2'</TT_VALUE_#POS_2#><TT_VALUE_#POS_2#_IS_DYNAMIC>True</TT_VALUE_#POS_2#_IS_DYNAMIC>
<TT_VALUE_#POS_3#>'3'</TT_VALUE_#POS_3#><TT_VALUE_#POS_3#_IS_DYNAMIC>True</TT_VALUE_#POS_3#_IS_DYNAMIC>
<TT_VALUE_#POS_4#>'4'</TT_VALUE_#POS_4#><TT_VALUE_#POS_4#_IS_DYNAMIC>True</TT_VALUE_#POS_4#_IS_DYNAMIC>
<TT_VALUE_#POS_MAX_AUTO#>@TT_Package.GT_STATE_MAXAUTO</TT_VALUE_#POS_MAX_AUTO#>
<SET_STATE_#POS_RTO#>0 (>K:SET_AUTOBRAKE_CONTROL)</SET_STATE_#POS_RTO#>
<SET_STATE_#POS_OFF#>1 (>K:SET_AUTOBRAKE_CONTROL)</SET_STATE_#POS_OFF#>
<SET_STATE_#POS_DISARM#>1 (>K:SET_AUTOBRAKE_CONTROL)</SET_STATE_#POS_DISARM#>
<SET_STATE_#POS_1#>2 (>K:SET_AUTOBRAKE_CONTROL)</SET_STATE_#POS_1#>
<SET_STATE_#POS_2#>3 (>K:SET_AUTOBRAKE_CONTROL)</SET_STATE_#POS_2#>
<SET_STATE_#POS_3#>4 (>K:SET_AUTOBRAKE_CONTROL)</SET_STATE_#POS_3#>
<SET_STATE_#POS_4#>5 (>K:SET_AUTOBRAKE_CONTROL)</SET_STATE_#POS_4#>
<SET_STATE_#POS_MAX_AUTO#>6 (>K:SET_AUTOBRAKE_CONTROL)</SET_STATE_#POS_MAX_AUTO#>
<GET_STATE_EXTERNAL>(A:AUTO BRAKE SWITCH CB, Number) sp0 (O:XMLVAR_Autobrake_Disarm) sp1</GET_STATE_EXTERNAL>
<ENUM_VAL_TO_POS_EXTERNAL>
l1 if{ #POS_DISARM# sp2 g2 }
els{
l0 0 == if{ #POS_RTO# sp2 g2 }
l0 1 == if{ #POS_OFF# sp2 g2 }
l0 2 == if{ #POS_1# sp2 g2 }
l0 3 == if{ #POS_2# sp2 g2 }
l0 4 == if{ #POS_3# sp2 g2 }
l0 5 == if{ #POS_4# sp2 g2 }
l0 6 == if{ #POS_MAX_AUTO# sp2 g2 }
} :2 l2
</ENUM_VAL_TO_POS_EXTERNAL>
<ON_STATE_CHANGED_EXTERNAL_CODE>p0 #POS_DISARM# == (>O:XMLVAR_Autobrake_Disarm)</ON_STATE_CHANGED_EXTERNAL_CODE>
</Case>
</Switch>
</Case>
</Switch>
</Parameters>
<UseTemplate Name="ASOBO_HANDLING_Base_Template">
<Switch Param="TYPE">
<Case Value="ON_OFF">
<IE_NAME>Autobrake_Level_#ID#</IE_NAME>
</Case>
<Case Value="X_STATES">
<IE_NAME>Autobrake_#ID#</IE_NAME>
</Case>
</Switch>
</UseTemplate>
</Template>
<Template Name="ASOBO_HANDLING_Wipers_Controller_SubTemplate">
<Parameters Type="Default">
<NODE_ID>HANDLING_#INTERACTION_TYPE#_Wipers</NODE_ID>
<ANIM_NAME>HANDLING_#INTERACTION_TYPE#_Wipers</ANIM_NAME>
<WWISE_EVENT>wipers_switch</WWISE_EVENT>
<TEMPLATE_TO_USE>ASOBO_GT_Switch_XStates</TEMPLATE_TO_USE>
<CIRCUIT_ID_WIPERS>1</CIRCUIT_ID_WIPERS>
<Switch>
<Case Valid="OFF_INT_LOW_HIGH">
<POWER_INT>30</POWER_INT>
<POWER_LOW>75</POWER_LOW>
<POWER_HIGH>100</POWER_HIGH>
<POS_OFF>0</POS_OFF>
<POS_INT>1</POS_INT>
<POS_LOW>2</POS_LOW>
<POS_HIGH>3</POS_HIGH>
<NUM_STATES>4</NUM_STATES>
</Case>
<Case Valid="PARK_OFF_NORM_FAST">
<POWER_FAST>100</POWER_FAST>
<POWER_NORM>50</POWER_NORM>
<POS_PARK>0</POS_PARK>
<POS_OFF>1</POS_OFF>
<POS_NORM>2</POS_NORM>
<POS_FAST>3</POS_FAST>
<MOMENTARY_MIN_DURATION>0.1</MOMENTARY_MIN_DURATION>
<CIRCUIT_ID_PARK>1</CIRCUIT_ID_PARK>
<NUM_STATES>4</NUM_STATES>
</Case>
<Default>
<POWER_NORM>100</POWER_NORM>
<POWER_SLOW>75</POWER_SLOW>
<POS_NORM>0</POS_NORM>
<POS_OFF>1</POS_OFF>
<POS_SLOW>2</POS_SLOW>
<NUM_STATES>3</NUM_STATES>
</Default>
</Switch>
<SWITCH_DIRECTION>Horizontal</SWITCH_DIRECTION>
<IE_WIPERS_ID>Wipers</IE_WIPERS_ID>
</Parameters>
<Parameters Type="Override">
<Switch Param="INTERACTION_TYPE">
<Case Value="Knob">
<ANIM>EXTERNAL</ANIM>
<ARROW_TYPE>Curved</ARROW_TYPE>
<TT_ICON>Rotate</TT_ICON>
</Case>
</Switch>
<INPUT_EVENT_ID_SOURCE>HANDLING</INPUT_EVENT_ID_SOURCE>
<USE_INPUT_EVENT_ID>HANDLING</USE_INPUT_EVENT_ID>
<BTN_ID>#IE_WIPERS_ID#</BTN_ID>
</Parameters>
<Parameters Type="Override">
<SET_POWER>#CIRCUIT_ID_WIPERS# (>K:2:ELECTRICAL_CIRCUIT_POWER_SETTING_SET)</SET_POWER>
<GET_POWER>(A:CIRCUIT POWER SETTING:#CIRCUIT_ID_WIPERS#, Percent)</GET_POWER>
<Switch>
<Case Valid="PARK_OFF_NORM_FAST">
<PARK_ON>(A:CIRCUIT SWITCH ON:#CIRCUIT_ID_PARK#, Bool) ! if{ #CIRCUIT_ID_PARK# (>K:ELECTRICAL_CIRCUIT_TOGGLE) }</PARK_ON>
<PARK_OFF>(A:CIRCUIT SWITCH ON:#CIRCUIT_ID_PARK#, Bool) if{ #CIRCUIT_ID_PARK# (>K:ELECTRICAL_CIRCUIT_TOGGLE) }</PARK_OFF>
<IS_PARK_ON>(A:CIRCUIT SWITCH ON:#CIRCUIT_ID_PARK#, Bool)</IS_PARK_ON>
<INIT_WIPERS_STATE>
(A:CIRCUIT SWITCH ON:#CIRCUIT_ID_PARK#, Bool) if{ #CIRCUIT_ID_PARK# (>K:ELECTRICAL_CIRCUIT_TOGGLE) }
(A:CIRCUIT SWITCH ON:#CIRCUIT_ID_WIPERS#, Bool) if{ #CIRCUIT_ID_WIPERS# (>K:ELECTRICAL_CIRCUIT_TOGGLE) }
</INIT_WIPERS_STATE>
<Condition>
<Test>
<GreaterOrEqual>
<Value>POS_PARK</Value>
<Number>1</Number>
</GreaterOrEqual>
</Test>
<True>
<STATE_MAX_TIMER>#MOMENTARY_MIN_DURATION#</STATE_MAX_TIMER>
<STATE0_TIMER>0</STATE0_TIMER>
<REST_STATE Process="Int">#POS_PARK# 1 -</REST_STATE>
</True>
<False>
<STATE_MAX_TIMER>0</STATE_MAX_TIMER>
<STATE0_TIMER>#MOMENTARY_MIN_DURATION#</STATE0_TIMER>
<REST_STATE Process="Int">1</REST_STATE>
</False>
</Condition>
</Case>
<Default>
<INIT_WIPERS_STATE>(A:CIRCUIT SWITCH ON:#CIRCUIT_ID_WIPERS#, Bool) if{ #CIRCUIT_ID_WIPERS# (>K:ELECTRICAL_CIRCUIT_TOGGLE) }</INIT_WIPERS_STATE>
</Default>
</Switch>
<WIPERS_ON>(A:CIRCUIT SWITCH ON:#CIRCUIT_ID_WIPERS#, Bool) ! if{ #CIRCUIT_ID_WIPERS# (>K:ELECTRICAL_CIRCUIT_TOGGLE) }</WIPERS_ON>
<WIPERS_OFF>(A:CIRCUIT SWITCH ON:#CIRCUIT_ID_WIPERS#, Bool) if{ #CIRCUIT_ID_WIPERS# (>K:ELECTRICAL_CIRCUIT_TOGGLE) }</WIPERS_OFF>
<IS_WIPERS_ON>(A:CIRCUIT SWITCH ON:#CIRCUIT_ID_WIPERS#, Bool)</IS_WIPERS_ON>
</Parameters>
<Parameters Type="Override">
<Condition NotEmpty="CIRCUIT_ID_WIPERS">
<SIMVAR_TO_WATCH_0>CIRCUIT SWITCH ON:#CIRCUIT_ID_WIPERS#</SIMVAR_TO_WATCH_0>
<SIMVAR_TO_WATCH_1>CIRCUIT POWER SETTING:#CIRCUIT_ID_WIPERS#</SIMVAR_TO_WATCH_1>
</Condition>
<Switch>
<Case Valid="OFF_INT_LOW_HIGH">
<GET_STATE_EXTERNAL>#IS_WIPERS_ON# sp0 #GET_POWER# near sp1</GET_STATE_EXTERNAL>
<ENUM_VAL_TO_POS_EXTERNAL>
l0 if{
l1 #POWER_INT# == if{
#POS_INT# sp2
} els{
l1 #POWER_LOW# == if{ #POS_LOW# sp2 } els{ #POS_HIGH# sp2 }
} g2
} els{ #POS_OFF# sp2 g2 } :2 l2
</ENUM_VAL_TO_POS_EXTERNAL>
<SET_STATE_#POS_OFF#>#WIPERS_OFF#</SET_STATE_#POS_OFF#>
<SET_STATE_#POS_INT#>#WIPERS_ON# #POWER_INT# #SET_POWER#</SET_STATE_#POS_INT#>
<SET_STATE_#POS_LOW#>#WIPERS_ON# #POWER_LOW# #SET_POWER#</SET_STATE_#POS_LOW#>
<SET_STATE_#POS_HIGH#>#WIPERS_ON# #POWER_HIGH# #SET_POWER#</SET_STATE_#POS_HIGH#>
<STR_STATE_#POS_OFF#>Off</STR_STATE_#POS_OFF#>
<STR_STATE_#POS_INT#>Int</STR_STATE_#POS_INT#>
<STR_STATE_#POS_LOW#>Low</STR_STATE_#POS_LOW#>
<STR_STATE_#POS_HIGH#>High</STR_STATE_#POS_HIGH#>
<TT_VALUE_#POS_OFF#>@TT_Package.GT_STATE_OFF</TT_VALUE_#POS_OFF#>
<TT_VALUE_#POS_INT#>@TT_Package.GT_STATE_INT</TT_VALUE_#POS_INT#>
<TT_VALUE_#POS_LOW#>@TT_Package.GT_STATE_LOW</TT_VALUE_#POS_LOW#>
<TT_VALUE_#POS_HIGH#>@TT_Package.GT_STATE_HIGH</TT_VALUE_#POS_HIGH#>
<CODE_POS_#POS_OFF#>(>B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID#_Off)</CODE_POS_#POS_OFF#>
<CODE_POS_#POS_INT#>(>B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID#_Int)</CODE_POS_#POS_INT#>
<CODE_POS_#POS_LOW#>(>B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID#_Low)</CODE_POS_#POS_LOW#>
<CODE_POS_#POS_HIGH#>(>B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID#_High)</CODE_POS_#POS_HIGH#>
<STATE#POS_OFF#_TEST>(B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID#) #POS_OFF# ==</STATE#POS_OFF#_TEST>
<STATE#POS_INT#_TEST>(B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID#) #POS_INT# ==</STATE#POS_INT#_TEST>
<STATE#POS_LOW#_TEST>(B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID#) #POS_LOW# ==</STATE#POS_LOW#_TEST>
<STATE#POS_HIGH#_TEST>(B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID#) #POS_HIGH# ==</STATE#POS_HIGH#_TEST>
</Case>
<Case Valid="PARK_OFF_NORM_FAST">
<SIMVAR_TO_WATCH_2>CIRCUIT SWITCH ON:#CIRCUIT_ID_PARK#</SIMVAR_TO_WATCH_2>
<GET_STATE_EXTERNAL>#IS_WIPERS_ON# sp0 #IS_PARK_ON# sp1 #GET_POWER# near sp2</GET_STATE_EXTERNAL>
<ENUM_VAL_TO_POS_EXTERNAL>
l0 if{
l2 #POWER_FAST# == if{ #POS_FAST# sp3 } els{ #POS_NORM# sp3 } g2
} els{
l1 if{ #POS_PARK# sp3 } els{ #POS_OFF# sp3 } g2
} :2 l3
</ENUM_VAL_TO_POS_EXTERNAL>
<CODE_POS_RETURN Process="Param">CODE_POS_#REST_STATE#</CODE_POS_RETURN>
<SET_STATE_#POS_FAST#>#PARK_OFF# #WIPERS_ON# #POWER_FAST# #SET_POWER#</SET_STATE_#POS_FAST#>
<SET_STATE_#POS_NORM#>#PARK_OFF# #WIPERS_ON# #POWER_NORM# #SET_POWER#</SET_STATE_#POS_NORM#>
<SET_STATE_#POS_OFF#>#PARK_OFF# #WIPERS_OFF#</SET_STATE_#POS_OFF#>
<SET_STATE_#POS_PARK#>#PARK_ON# #WIPERS_OFF#</SET_STATE_#POS_PARK#>
<STR_STATE_#POS_FAST#>Fast</STR_STATE_#POS_FAST#>
<STR_STATE_#POS_NORM#>Norm</STR_STATE_#POS_NORM#>
<STR_STATE_#POS_OFF#>Off</STR_STATE_#POS_OFF#>
<STR_STATE_#POS_PARK#>Park</STR_STATE_#POS_PARK#>
<TT_VALUE_#POS_FAST#>@TT_Package.GT_STATE_FAST</TT_VALUE_#POS_FAST#>
<TT_VALUE_#POS_NORM#>@TT_Package.GT_STATE_NORMAL</TT_VALUE_#POS_NORM#>
<TT_VALUE_#POS_OFF#>@TT_Package.GT_STATE_OFF</TT_VALUE_#POS_OFF#>
<TT_VALUE_#POS_PARK#>@TT_Package.GT_STATE_PARK</TT_VALUE_#POS_PARK#>
<CODE_POS_#POS_FAST#>(>B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID#_Fast)</CODE_POS_#POS_FAST#>
<CODE_POS_#POS_NORM#>(>B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID#_Norm)</CODE_POS_#POS_NORM#>
<CODE_POS_#POS_OFF#>(>B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID#_Off)</CODE_POS_#POS_OFF#>
<CODE_POS_#POS_PARK#>(>B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID#_Park)</CODE_POS_#POS_PARK#>
<STATE#POS_FAST#_TEST>(B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID#) #POS_FAST# ==</STATE#POS_FAST#_TEST>
<STATE#POS_NORM#_TEST>(B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID#) #POS_NORM# ==</STATE#POS_NORM#_TEST>
<STATE#POS_OFF#_TEST>(B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID#) #POS_OFF# ==</STATE#POS_OFF#_TEST>
<STATE#POS_PARK#_TEST>(B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID#) #POS_PARK# ==</STATE#POS_PARK#_TEST>
<MOMENTARY_SWITCH/>
</Case>
<Default>
<GET_STATE_EXTERNAL>#IS_WIPERS_ON# sp0 #GET_POWER# near sp1</GET_STATE_EXTERNAL>
<ENUM_VAL_TO_POS_EXTERNAL>l0 if{ l1 #POWER_SLOW# == if{ #POS_SLOW# sp2 } els{ #POS_NORM# sp2 } g2 } els{ #POS_OFF# sp2 } :2 l2</ENUM_VAL_TO_POS_EXTERNAL>
<SET_STATE_#POS_NORM#>#WIPERS_ON# #POWER_NORM# #SET_POWER#</SET_STATE_#POS_NORM#>
<SET_STATE_#POS_OFF#>#WIPERS_OFF#</SET_STATE_#POS_OFF#>
<SET_STATE_#POS_SLOW#>#WIPERS_ON# #POWER_SLOW# #SET_POWER#</SET_STATE_#POS_SLOW#>
<STR_STATE_#POS_NORM#>Norm</STR_STATE_#POS_NORM#>
<STR_STATE_#POS_OFF#>Off</STR_STATE_#POS_OFF#>
<STR_STATE_#POS_SLOW#>Slow</STR_STATE_#POS_SLOW#>
<TT_VALUE_#POS_NORM#>@TT_Package.GT_STATE_NORMAL</TT_VALUE_#POS_NORM#>
<TT_VALUE_#POS_OFF#>@TT_Package.GT_STATE_OFF</TT_VALUE_#POS_OFF#>
<TT_VALUE_#POS_SLOW#>@TT_Package.GT_STATE_SLOW</TT_VALUE_#POS_SLOW#>
<CODE_POS_#POS_NORM#>(>B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID#_Norm)</CODE_POS_#POS_NORM#>
<CODE_POS_#POS_OFF#>(>B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID#_Off)</CODE_POS_#POS_OFF#>
<CODE_POS_#POS_SLOW#>(>B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID#_Slow)</CODE_POS_#POS_SLOW#>
<STATE#POS_NORM#_TEST>(B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID#) #POS_NORM# ==</STATE#POS_NORM#_TEST>
<STATE#POS_OFF#_TEST>(B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID#) #POS_OFF# ==</STATE#POS_OFF#_TEST>
<STATE#POS_SLOW#_TEST>(B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID#) #POS_SLOW# ==</STATE#POS_SLOW#_TEST>
</Default>
</Switch>
<TOOLTIP_ENTRY_0>#INPUT_EVENT_ID_SOURCE#_#BTN_ID#</TOOLTIP_ENTRY_0>
</Parameters>
<Parameters Type="Default">
<TOOLTIP_TITLE>@TT_Package.SAFETY_KNOB_WIPERS_TITLE</TOOLTIP_TITLE>
<TT_DESCRIPTION_ID>@TT_Package.SAFETY_KNOB_WIPERS_LEFT_ACTION</TT_DESCRIPTION_ID>
</Parameters>
<Component ID="#NODE_ID#" Node="#NODE_ID#">
<UseTemplate Name="ASOBO_GT_Update">
<UPDATE_ONCE>True</UPDATE_ONCE>
<UPDATE_CODE>#INIT_WIPERS_STATE#</UPDATE_CODE>
</UseTemplate>
<UseInputEvent ID="#USE_INPUT_EVENT_ID#"/>
<UseTemplate Name="#TEMPLATE_TO_USE#"/>
</Component>
</Template>
<Template Name="ASOBO_HANDLING_Switch_AerobaticsTrimFlaps_SubTemplate">
<Parameters Type="Default">
<ANIM_NAME>HANDLING_Switch_AerobaticsTrimFlaps</ANIM_NAME>
<NODE_ID>HANDLING_Switch_AerobaticsTrimFlaps</NODE_ID>
<PART_ID>HANDLING_Switch_AerobaticsTrimFlaps</PART_ID>
<BUS_ID>-1</BUS_ID>
<CIRCUIT_ID>1</CIRCUIT_ID>
<WWISE_EVENT_1>aerobaticstrimflaps_switch_on</WWISE_EVENT_1>
<WWISE_EVENT_2>aerobaticstrimflaps_switch_off</WWISE_EVENT_2>
<IE_CIRCUIT_ID>Aerobatic_Trim_Flaps</IE_CIRCUIT_ID>
<TT_DESCRIPTION_ID>@TT_Package.HANDLING_SWITCH_AEROBATICSTRIMFLAPS_ACTION</TT_DESCRIPTION_ID>
<TOOLTIP_TITLE>@TT_Package.HANDLING_SWITCH_AEROBATICSTRIMFLAPS_TITLE</TOOLTIP_TITLE>
</Parameters>
<Parameters Type="Override">
<DISABLE_TRIM>
1 (>K:RUDDER_TRIM_DISABLED_SET)
1 (>K:AILERON_TRIM_DISABLED_SET)
1 (>K:ELEVATOR_TRIM_DISABLED_SET)
</DISABLE_TRIM>
<ENABLE_TRIM>
0 (>K:RUDDER_TRIM_DISABLED_SET)
0 (>K:AILERON_TRIM_DISABLED_SET)
0 (>K:ELEVATOR_TRIM_DISABLED_SET)
</ENABLE_TRIM>
</Parameters>
<Parameters Type="Override">
<BTN_ID>#IE_CIRCUIT_ID#</BTN_ID>
<IS_CONNECTION_ON>#BUS_ID# (A:1:CIRCUIT CONNECTION ON:#CIRCUIT_ID#, Bool)</IS_CONNECTION_ON>
</Parameters>
<Component ID="#NODE_ID#" Node="#NODE_ID#">
<UseInputEvent ID="HANDLING">
<SET_STATE_EXTERNAL>
#IS_CONNECTION_ON# ! p0 != if{ #CIRCUIT_ID# #BUS_ID# (>K:2:ELECTRICAL_BUS_TO_CIRCUIT_CONNECTION_TOGGLE) }
#IS_CONNECTION_ON# if{ #ENABLE_TRIM# } els{ #DISABLE_TRIM# }
</SET_STATE_EXTERNAL>
<GET_STATE_EXTERNAL>#IS_CONNECTION_ON# ! sp0</GET_STATE_EXTERNAL>
<SIM_STATE_IS_ON_EXTERNAL>l0</SIM_STATE_IS_ON_EXTERNAL>
<ANIM>EXTERNAL</ANIM>
</UseInputEvent>
<UseTemplate Name="ASOBO_GT_Switch_Code">
<TOOLTIP_ENTRY_0>HANDLING_#BTN_ID#</TOOLTIP_ENTRY_0>
<ANIM_CODE>(B:HANDLING_#BTN_ID#, Bool) 100 *</ANIM_CODE>
<LEFT_SINGLE_CODE>(>B:HANDLING_#BTN_ID#_Toggle)</LEFT_SINGLE_CODE>
</UseTemplate>
</Component>
</Template>
<Template Name="ASOBO_HANDLING_InertSep_SubTemplate">
<Parameters Type="Default">
<NODE_ID>HANDLING_#INTERACTION_TYPE#_InertSep</NODE_ID>
<ANIM_NAME>HANDLING_#INTERACTION_TYPE#_InertSep</ANIM_NAME>
<Switch Param="INTERACTION_TYPE">
<Case Value="Lever">
<WWISE_EVENT_1>Inertsep_lever_on</WWISE_EVENT_1>
<NORMALIZED_TIME_1>0.1</NORMALIZED_TIME_1>
<DIRECTION_1>Forward</DIRECTION_1>
<WWISE_EVENT_2>Inertsep_lever_off</WWISE_EVENT_2>
<NORMALIZED_TIME_2>0.9</NORMALIZED_TIME_2>
<DIRECTION_2>Backward</DIRECTION_2>
<ANIM>EXTERNAL</ANIM>
</Case>
</Switch>
<VAR_NAME>XMLVAR_InterSep</VAR_NAME>
<VAR_SCOPE>L</VAR_SCOPE>
<TOOLTIP_TITLE>@TT_Package.DEICE_SWITCH_INERTSEP_TITLE</TOOLTIP_TITLE>
<TT_DESCRIPTION_ID>@TT_Package.DEICE_SWITCH_INERTSEP_ACTION</TT_DESCRIPTION_ID>
</Parameters>
<Parameters Type="Override">
<BTN_ID>InertSep</BTN_ID>
</Parameters>
<Component ID="#NODE_ID#" Node="#NODE_ID#">
<UseInputEvent ID="HANDLING">
<SET_STATE_ON>1 (>#VAR_SCOPE#:#VAR_NAME#)</SET_STATE_ON>
<SET_STATE_OFF>0 (>#VAR_SCOPE#:#VAR_NAME#)</SET_STATE_OFF>
<GET_STATE_EXTERNAL>(#VAR_SCOPE#:#VAR_NAME#) sp0</GET_STATE_EXTERNAL>
<SIM_STATE_IS_ON_EXTERNAL>l0</SIM_STATE_IS_ON_EXTERNAL>
<STR_STATE_OFF>Normal</STR_STATE_OFF>
<STR_STATE_ON>Bypass</STR_STATE_ON>
<TT_VALUE_OFF>(R:1:@TT_Package.GT_STATE_NORMAL)</TT_VALUE_OFF>
<TT_VALUE_ON>(R:1:@TT_Package.GT_STATE_BYPASS)</TT_VALUE_ON>
</UseInputEvent>
<UseTemplate Name="ASOBO_GT_Switch_Code">
<TOOLTIP_ENTRY_0>HANDLING_#BTN_ID#</TOOLTIP_ENTRY_0>
<LEFT_SINGLE_CODE>(>B:HANDLING_#BTN_ID#_Toggle)</LEFT_SINGLE_CODE>
<ANIM_CODE>(B:HANDLING_#BTN_ID#, Bool) 100 *</ANIM_CODE>
</UseTemplate>
</Component>
</Template>
<Template Name="ASOBO_HANDLING_AutoSpoiler_SubTemplate">
<Parameters Type="Default">
<ANIM_NAME>HANDLING_#INTERACTION_TYPE#_AutoSpoiler</ANIM_NAME>
<NODE_ID>HANDLING_#INTERACTION_TYPE#_AutoSpoiler</NODE_ID>
<PART_ID>HANDLING_#INTERACTION_TYPE#_AutoSpoiler</PART_ID>
<Switch Param="INTERACTION_TYPE">
<Case Value="Push">
<WWISE_EVENT_1>autospoiler_push_button_on</WWISE_EVENT_1>
<NORMALIZED_TIME_1>0.1</NORMALIZED_TIME_1>
<WWISE_EVENT_2>autospoiler_push_button_off</WWISE_EVENT_2>
<NORMALIZED_TIME_2>0.5</NORMALIZED_TIME_2>
<PUSH_TYPE>NORM_DISARM</PUSH_TYPE>
</Case>
</Switch>
<TT_DESCRIPTION_ID>@TT_Package.HANDLING_PUSH_AUTOGROUNDSPOILERS_ACTION</TT_DESCRIPTION_ID>
<TOOLTIP_TITLE>@TT_Package.HANDLING_PUSH_AUTOGROUNDSPOILERS_TITLE</TOOLTIP_TITLE>
</Parameters>
<Parameters Type="Override">
<BTN_ID>AutoSpoiler</BTN_ID>
</Parameters>
<Switch Param="INTERACTION_TYPE">
<Case Value="Push">
<UseTemplate Name="ASOBO_GT_Push_Button_Airliner">
<Switch Param="PUSH_TYPE">
<Case Value="NORM_DISARM">
<STR_STATE_ON>Norm</STR_STATE_ON>
<STR_STATE_OFF>Disarm</STR_STATE_OFF>
<TT_VALUE_ON>(R:1:@TT_Package.GT_STATE_NORMAL)</TT_VALUE_ON>
<TT_VALUE_OFF>(R:1:@TT_Package.GT_STATE_DISARM)</TT_VALUE_OFF>
</Case>
</Switch>
<INPUT_EVENT_ID>ENGINE</INPUT_EVENT_ID>
<TOOLTIP_ENTRY_0>ENGINE_#BTN_ID#</TOOLTIP_ENTRY_0>
<SEQ1_EMISSIVE_CODE>(B:ENGINE_#BTN_ID#, Bool)</SEQ1_EMISSIVE_CODE>
<SEQ2_EMISSIVE_CODE>(B:ENGINE_#BTN_ID#, Bool) !</SEQ2_EMISSIVE_CODE>
<LEFT_SINGLE_CODE>(>B:ENGINE_#BTN_ID#_Toggle)</LEFT_SINGLE_CODE>
<SIMVAR_TO_WATCH_0>SPOILERS ARMED</SIMVAR_TO_WATCH_0>
<SET_STATE_EXTERNAL>(A:SPOILERS ARMED, Bool) p0 != if{ (>K:SPOILERS_ARM_TOGGLE) }</SET_STATE_EXTERNAL>
<GET_STATE_EXTERNAL>(A:SPOILERS ARMED, Bool) sp0</GET_STATE_EXTERNAL>
<SIM_STATE_IS_ON_EXTERNAL>l0</SIM_STATE_IS_ON_EXTERNAL>
</UseTemplate>
</Case>
</Switch>
</Template>
<Template Name="ASOBO_HANDLING_Water_Rudder_Controller_SubTemplate">
<Parameters Type="Default">
<NODE_ID>HANDLING_#INTERACTION_TYPE#_Water_Rudder</NODE_ID>
<ANIM_NAME>HANDLING_#INTERACTION_TYPE#_Water_Rudder</ANIM_NAME>
<PART_ID>HANDLING_#INTERACTION_TYPE#_Water_Rudder</PART_ID>
<WWISE_PREFIX>water_rudder</WWISE_PREFIX>
<Switch Param="INTERACTION_TYPE">
<Case Value="Switch">
<TOOLTIP_TITLE>@TT_Package.HYDRA_SWITCH_WATERRUDDER_TITLE</TOOLTIP_TITLE>
<TT_DESCRIPTION_ID>@TT_Package.HYDRA_SWITCH_WATERRUDDER_ACTION_SET</TT_DESCRIPTION_ID>
</Case>
<Case Value="Lever">
<TOOLTIP_TITLE>@TT_Package.LANDING_GEAR_WATER_RUDDER_TITLE</TOOLTIP_TITLE>
<TT_DESCRIPTION_ID>@TT_Package.LANDING_GEAR_WATER_RUDDER_ACTION</TT_DESCRIPTION_ID>
</Case>
</Switch>
<Condition Valid="USE_STATE_INDICATOR">
<EMISSIVE_NODE_ID>HANDLING_Indicator_WaterRudder</EMISSIVE_NODE_ID>
</Condition>
</Parameters>
<Condition Valid="USE_STATE_INDICATOR">
<Component ID="#EMISSIVE_NODE_ID#" Node="#EMISSIVE_NODE_ID#">
<UseTemplate Name="ASOBO_GT_Emissive_Gauge">
<EMISSIVE_CODE>(B:HANDLING_Water_Rudder, Bool)</EMISSIVE_CODE>
</UseTemplate>
</Component>
</Condition>
<UseTemplate Name="ASOBO_HANDLING_Base_Template">
<IE_NAME>Water_Rudder</IE_NAME>
<SET_STATE_EXTERNAL>p0 (A:WATER RUDDER HANDLE POSITION, percent over 100) 0 > != if{ (>K:TOGGLE_WATER_RUDDER) }</SET_STATE_EXTERNAL>
<GET_STATE_EXTERNAL>(A:WATER RUDDER HANDLE POSITION, percent over 100) 0 > sp0</GET_STATE_EXTERNAL>
<SIM_STATE_IS_ON_EXTERNAL>l0</SIM_STATE_IS_ON_EXTERNAL>
<STR_STATE_ON>Down</STR_STATE_ON>
<STR_STATE_OFF>Up</STR_STATE_OFF>
<TT_VALUE_ON>(R:1:@TT_Package.GT_STATE_DOWN)</TT_VALUE_ON>
<TT_VALUE_OFF>(R:1:@TT_Package.GT_STATE_UP)</TT_VALUE_OFF>
<SIMVAR_TO_WATCH_0>WATER RUDDER HANDLE POSITION</SIMVAR_TO_WATCH_0>
<Switch Param="INTERACTION_TYPE">
<Case Value="Lever">
<LEVER_TYPE>2_STATES</LEVER_TYPE>
</Case>
</Switch>
</UseTemplate>
</Template>
</ModelBehaviors>
Templates
Template list
- ASOBO_HANDLING_Yoke_Hider_Template
- ASOBO_HANDLING_Yoke_SubTemplate
- ASOBO_HANDLING_Yoke_Hideable_SubTemplate
- ASOBO_HANDLING_Joystick_YawPitch_SubTemplate
- ASOBO_HANDLING_Timer_SubTemplate
- ASOBO_HANDLING_StormClear_SubTemplate
- ASOBO_HANDLING_CWS_SubTemplate
- ASOBO_HANDLING_Ident_SubTemplate
- ASOBO_HANDLING_Swap_SubTemplate
- ASOBO_HANDLING_AntiSkid_SubTemplate
- ASOBO_HANDLING_GLimiter_SubTemplate
- ASOBO_HANDLING_Steering_Tiller_SubTemplate
- ASOBO_HANDLING_RudderPedals_SubTemplate
- ASOBO_HANDLING_Light_Flaps_SubTemplate
- ASOBO_HANDLING_Light_Trim_Subtemplate
- ASOBO_HANDLING_AileronTrim_Template
- ASOBO_HANDLING_RudderTrim_Template
- ASOBO_HANDLING_ElevatorTrim_Template
- ASOBO_HANDLING_Combined_Trim_SubTemplate
- ASOBO_HANDLING_AP_Trim_Disc_SubTemplate
- ASOBO_HANDLING_Trim_Variable_Speed_Base_Template
- ASOBO_HANDLING_Secondary_Trim_Available_SubTemplate
- ASOBO_HANDLING_Spoilers_Int_SubTemplate
- ASOBO_HANDLING_Flaps_SubTemplate
- ASOBO_HANDLING_Flaps_Lever_SubTemplate
- ASOBO_HANDLING_Flaps_Button_SubTemplate
- ASOBO_HANDLING_Autobrakes_SubTemplate
- ASOBO_HANDLING_Wipers_Controller_SubTemplate
- ASOBO_HANDLING_Switch_AerobaticsTrimFlaps_SubTemplate
- ASOBO_HANDLING_InertSep_SubTemplate
- ASOBO_HANDLING_AutoSpoiler_SubTemplate
- ASOBO_HANDLING_Water_Rudder_Controller_SubTemplate
-
ASOBO_HANDLING_Yoke_Hider_Template
Definition from XML<Template Name="ASOBO_HANDLING_Yoke_Hider_Template"> <Parameters Type="Default"> <ID>1</ID> <MOUSERECT_DISABLED_WITH_MOTION_CONTROLLERS>True</MOUSERECT_DISABLED_WITH_MOTION_CONTROLLERS> </Parameters> <Parameters Type="Default"> <NODE_ID>HANDLING_YOKE_Hider_#ID#</NODE_ID> </Parameters> <Parameters Type="Default"> <TOOLTIP_TITLE>@TT_Package.YOKE_VISIBILITY_TITLE</TOOLTIP_TITLE> <TOOLTIP_ENTRY_0>HANDLING_Yoke_Hider_#ID#</TOOLTIP_ENTRY_0> </Parameters> <Component ID="#NODE_ID#_Hider" Node="#NODE_ID#"> <UseInputEvent ID="HANDLING"> <HIDER_ID>#ID#</HIDER_ID> </UseInputEvent> <UseTemplate Name="ASOBO_GT_Interaction_LeftSingle_Code"> <LEFT_SINGLE_CODE>(>B:HANDLING_Yoke_Hider_#ID#_Toggle)</LEFT_SINGLE_CODE> </UseTemplate> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- ID
- MOUSERECT_DISABLED_WITH_MOTION_CONTROLLERS
-
Default
Parameters set:
- NODE_ID (using ID)
-
Default
Parameters set:
- TOOLTIP_TITLE
- TOOLTIP_ENTRY_0 (using ID)
Parameters read:
- NODE_ID
Components:
-
#NODE_ID#_Hider (Node: #NODE_ID#)
Parameters set:
- HIDER_ID (using ID)
Templates used:
-
ASOBO_GT_Interaction_LeftSingle_Code
Parameters set:
- LEFT_SINGLE_CODE (using ID)
-
Default
-
ASOBO_HANDLING_Yoke_SubTemplate
Definition from XML<Template Name="ASOBO_HANDLING_Yoke_SubTemplate"> <DefaultTemplateParameters> <Condition Check="CREATE_TWO_NODES"> <True> <NODE_ID>HANDLING_Yoke_1</NODE_ID> <NODE_ID2>HANDLING_Yoke_2</NODE_ID2> </True> <False> <NODE_ID>HANDLING_Yoke_#ID#</NODE_ID> </False> </Condition> <Condition Valid="AP_CAN_DRIVE_ANIMATION"> <True> <ANIM_SIMVAR_X>YOKE X POSITION WITH AP</ANIM_SIMVAR_X> <ANIM_SIMVAR_X_LINEAR>YOKE X POSITION WITH AP LINEAR</ANIM_SIMVAR_X_LINEAR> <ANIM_SIMVAR_Y>YOKE Y POSITION WITH AP</ANIM_SIMVAR_Y> </True> <False> <ANIM_SIMVAR_X>YOKE X POSITION</ANIM_SIMVAR_X> <ANIM_SIMVAR_X_LINEAR>YOKE X POSITION LINEAR</ANIM_SIMVAR_X_LINEAR> <ANIM_SIMVAR_Y>YOKE Y POSITION</ANIM_SIMVAR_Y> </False> </Condition> <ANIM_NAME_YOKE_X>HANDLING_YOKE_Lever_StickLR</ANIM_NAME_YOKE_X> <ANIM_NAME_YOKE_Y>HANDLING_YOKE_Lever_StickForeAft</ANIM_NAME_YOKE_Y> <PART_ID>HANDLING_Yoke</PART_ID> <ANIM_LENGTH>200</ANIM_LENGTH> <ANIM_SIMVAR_BIAS>100</ANIM_SIMVAR_BIAS> </DefaultTemplateParameters> <Component ID="#NODE_ID#_#ID#" Node="#NODE_ID#"> <UseTemplate Name="ASOBO_GT_Anim_Code"> <ANIM_NAME>#ANIM_NAME_YOKE_X#</ANIM_NAME> <ANIM_CODE>(E:IS IN VR, Bool) if{ (A:#ANIM_SIMVAR_X_LINEAR#, percent over 100) } els{ (A:#ANIM_SIMVAR_X#, percent over 100) } #ANIM_LENGTH# 0.5 * * #ANIM_SIMVAR_BIAS# +</ANIM_CODE> </UseTemplate> <UseTemplate Name="ASOBO_GT_Anim_Sim"> <ANIM_NAME>#ANIM_NAME_YOKE_Y#</ANIM_NAME> <ANIM_SIMVAR>#ANIM_SIMVAR_Y#</ANIM_SIMVAR> <ANIM_SIMVAR_UNITS>percent</ANIM_SIMVAR_UNITS> </UseTemplate> </Component> <Condition Check="CREATE_TWO_NODES"> <UseTemplate Name="ASOBO_GT_ComponentWith_PART_ID"> <NODE_ID>#NODE_ID2#</NODE_ID> </UseTemplate> </Condition> </Template>Parameters initialization:
-
Default
Parameters set:
- ANIM_NAME_YOKE_X
- ANIM_NAME_YOKE_Y
- PART_ID
- ANIM_LENGTH
- ANIM_SIMVAR_BIAS
Condition: Check(CREATE_TWO_NODES)
-
Case: True
Parameters set:
- NODE_ID
- NODE_ID2
-
Case: False
Parameters set:
- NODE_ID (using ID)
Condition: Valid(AP_CAN_DRIVE_ANIMATION)
-
Case: True
Parameters set:
- ANIM_SIMVAR_X
- ANIM_SIMVAR_X_LINEAR
- ANIM_SIMVAR_Y
-
Case: False
Parameters set:
- ANIM_SIMVAR_X
- ANIM_SIMVAR_X_LINEAR
- ANIM_SIMVAR_Y
Parameters read:
- NODE_ID
- ID
Components:
-
#NODE_ID#_#ID# (Node: #NODE_ID#)
Templates used:
-
ASOBO_GT_Anim_Code
Parameters set:
- ANIM_NAME (using ANIM_NAME_YOKE_X)
- ANIM_CODE (using ANIM_SIMVAR_X_LINEAR, ANIM_SIMVAR_X, ANIM_LENGTH, ANIM_SIMVAR_BIAS)
-
ASOBO_GT_Anim_Sim
Parameters set:
- ANIM_NAME (using ANIM_NAME_YOKE_Y)
- ANIM_SIMVAR (using ANIM_SIMVAR_Y)
- ANIM_SIMVAR_UNITS
-
ASOBO_GT_Anim_Code
Condition: Check(CREATE_TWO_NODES)
-
Case: True
Templates used:
-
ASOBO_GT_ComponentWith_PART_ID
Parameters set:
- NODE_ID (using NODE_ID2)
-
ASOBO_GT_ComponentWith_PART_ID
-
Default
-
ASOBO_HANDLING_Yoke_Hideable_SubTemplate
Definition from XML<Template Name="ASOBO_HANDLING_Yoke_Hideable_SubTemplate"> <DefaultTemplateParameters> <NODE_ID>HANDLING_YOKE_Hideable_#ID#</NODE_ID> <YOKE_HIDER_NODE_ID>HANDLING_YOKE_Hider_#ID#</YOKE_HIDER_NODE_ID> <YOKE_NODE_ID>HANDLING_Yoke_#ID#</YOKE_NODE_ID> <TOOLTIPID>TT:COCKPIT.TOOLTIPS.YOKE_VISIBILITY</TOOLTIPID> </DefaultTemplateParameters> <Component ID="#NODE_ID#_VisibilityNode" Node="#NODE_ID#"> <UseTemplate Name="ASOBO_GT_Visibility_Code"> <VISIBILITY_CODE>(L:XMLVAR_YokeHidden#ID#) !</VISIBILITY_CODE> </UseTemplate> </Component> <Condition Check="ONLY_DECORATIVE"> <False> <UseTemplate Name="ASOBO_HANDLING_Yoke_Hider_Template"> <NODE_ID>#YOKE_HIDER_NODE_ID#</NODE_ID> </UseTemplate> <Condition Check="ONLY_HIDEABLE"> <True> <UseTemplate Name="ASOBO_GT_ComponentWith_PART_ID"> <NODE_ID>#YOKE_NODE_ID#</NODE_ID> <PART_ID>HANDLING_YOKE</PART_ID> </UseTemplate> </True> <False> <UseTemplate Name="ASOBO_HANDLING_Yoke_Template"> <NODE_ID>#YOKE_NODE_ID#</NODE_ID> </UseTemplate> </False> </Condition> </False> </Condition> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID (using ID)
- YOKE_HIDER_NODE_ID (using ID)
- YOKE_NODE_ID (using ID)
- TOOLTIPID
Parameters read:
- NODE_ID
Components:
-
#NODE_ID#_VisibilityNode (Node: #NODE_ID#)
Templates used:
-
ASOBO_GT_Visibility_Code
Parameters set:
- VISIBILITY_CODE (using ID)
-
ASOBO_GT_Visibility_Code
Condition: Check(ONLY_DECORATIVE)
-
Case: False
Templates used:
-
ASOBO_HANDLING_Yoke_Hider_Template
Parameters set:
- NODE_ID (using YOKE_HIDER_NODE_ID)
Condition: Check(ONLY_HIDEABLE)
-
Case: True
Templates used:
-
ASOBO_GT_ComponentWith_PART_ID
Parameters set:
- NODE_ID (using YOKE_NODE_ID)
- PART_ID
-
ASOBO_GT_ComponentWith_PART_ID
-
Case: False
Templates used:
-
ASOBO_HANDLING_Yoke_Template
Parameters set:
- NODE_ID (using YOKE_NODE_ID)
-
ASOBO_HANDLING_Yoke_Template
-
ASOBO_HANDLING_Yoke_Hider_Template
-
Default
-
ASOBO_HANDLING_Joystick_YawPitch_SubTemplate
Definition from XML<Template Name="ASOBO_HANDLING_Joystick_YawPitch_SubTemplate"> <Parameters Type="Default"> <NODE_ID>HANDLING_Joystick_YawPitch_#ID#</NODE_ID> <ANIM_NAME_L_R>HANDLING_Joystick_YawPitch_L_R_#ID#</ANIM_NAME_L_R> <ANIM_NAME_DN_UP>HANDLING_Joystick_YawPitch_DN_UP_#ID#</ANIM_NAME_DN_UP> <INPUT_EVENT_ID_SOURCE>HANDLING</INPUT_EVENT_ID_SOURCE> </Parameters> <Parameters Type="Default"> <VAR_NAME>#INPUT_EVENT_ID_SOURCE#_Joystick_#ID#_Interacting</VAR_NAME> <TT_DESCRIPTION_ID_PAN_X>@TT_Package.YOKE_PUSH_NOSE_ACTION</TT_DESCRIPTION_ID_PAN_X> <TT_DESCRIPTION_ID_PAN_Y>@TT_Package.YOKE_PUSH_NOSE_ACTION</TT_DESCRIPTION_ID_PAN_Y> <TT_DESCRIPTION_ID_DISENGAGE>@TT_Package.GT_STATE_DISENGAGE</TT_DESCRIPTION_ID_DISENGAGE> <TOOLTIP_TITLE_EXTERNAL>@TT_Package.YOKE_PUSH_NOSE_TITLE</TOOLTIP_TITLE_EXTERNAL> </Parameters> <Parameters Type="Override"> <KNOB_X_ID>Yaw_Pitch_X</KNOB_X_ID> <KNOB_Y_ID>Yaw_Pitch_Y</KNOB_Y_ID> <BTN_DISENGAGE_ID>Yaw_Pitch_AP_Disengage</BTN_DISENGAGE_ID> </Parameters> <Parameters Type="Override"> <JOYSTICK_X_CODE_LEFT>1 (>B:#INPUT_EVENT_ID_SOURCE#_#KNOB_X_ID#_Left)</JOYSTICK_X_CODE_LEFT> <JOYSTICK_X_CODE_RIGHT>1 (>B:#INPUT_EVENT_ID_SOURCE#_#KNOB_X_ID#_Right)</JOYSTICK_X_CODE_RIGHT> <JOYSTICK_Y_CODE_DOWN>1 (>B:#INPUT_EVENT_ID_SOURCE#_#KNOB_Y_ID#_Up)</JOYSTICK_Y_CODE_DOWN> <JOYSTICK_Y_CODE_UP>1 (>B:#INPUT_EVENT_ID_SOURCE#_#KNOB_Y_ID#_Down)</JOYSTICK_Y_CODE_UP> <LEFT_SINGLE_CODE_DEFAULT_IM>1 (>B:#INPUT_EVENT_ID_SOURCE#_#BTN_DISENGAGE_ID#_Set)</LEFT_SINGLE_CODE_DEFAULT_IM> <LEFT_RELEASE_CODE_DEFAULT_IM>0 (>B:#INPUT_EVENT_ID_SOURCE#_#BTN_DISENGAGE_ID#_Set)</LEFT_RELEASE_CODE_DEFAULT_IM> <LEFT_SINGLE_CODE_DRAG_IM>1 (>B:#INPUT_EVENT_ID_SOURCE#_#BTN_DISENGAGE_ID#_Set)</LEFT_SINGLE_CODE_DRAG_IM> <LEFT_RELEASE_CODE_DRAG_IM>0 (>B:#INPUT_EVENT_ID_SOURCE#_#BTN_DISENGAGE_ID#_Set)</LEFT_RELEASE_CODE_DRAG_IM> </Parameters> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <Parameters Type="Override"> <TOOLTIP_TITLE>#TOOLTIP_TITLE_EXTERNAL#</TOOLTIP_TITLE> <TOOLTIP_ENTRY_0>#INPUT_EVENT_ID_SOURCE#_#KNOB_X_ID#</TOOLTIP_ENTRY_0> <TOOLTIP_ENTRY_1>#INPUT_EVENT_ID_SOURCE#_#KNOB_Y_ID#</TOOLTIP_ENTRY_1> </Parameters> <UseInputEvent ID="HANDLING"> <BTN_ID>#BTN_DISENGAGE_ID#</BTN_ID> <TT_DESCRIPTION_ID>#TT_DESCRIPTION_ID_DISENGAGE#</TT_DESCRIPTION_ID> <BINDING_INC_0>Push</BINDING_INC_0> <BINDING_INC_0_PARAM_0>1</BINDING_INC_0_PARAM_0> <BINDING_DEC_0>Release</BINDING_DEC_0> <BINDING_DEC_0_PARAM_0>0</BINDING_DEC_0_PARAM_0> <SET_STATE_EXTERNAL>(A:AUTOPILOT DISENGAGED, Bool) != if{ p0 (>K:AUTOPILOT_DISENGAGE_SET) }</SET_STATE_EXTERNAL> <ANIM_EXTERNAL>True</ANIM_EXTERNAL> </UseInputEvent> <UseInputEvent ID="HANDLING"> <KNOB_ID>#KNOB_X_ID#</KNOB_ID> <TT_DESCRIPTION_ID>#TT_DESCRIPTION_ID_PAN_X#</TT_DESCRIPTION_ID> <TT_ICON>MOVE_AXIS</TT_ICON> <SET_STATE_EXTERNAL>0 > if{ (>K:RUDDER_TRIM_RIGHT) } els{ (>K:RUDDER_TRIM_LEFT) }</SET_STATE_EXTERNAL> <BINDING_INC_0>Right</BINDING_INC_0> <BINDING_INC_0_PARAM_0>1</BINDING_INC_0_PARAM_0> <BINDING_DEC_0>Left</BINDING_DEC_0> <BINDING_DEC_0_PARAM_0>1</BINDING_DEC_0_PARAM_0> <NO_ANIM_VAR_UPDATE>True</NO_ANIM_VAR_UPDATE> <GET_TT_VALUE_STATE>(A:RUDDER TRIM, degrees)</GET_TT_VALUE_STATE> <FORMAT_VALUE>'%.1f°' @sprintf</FORMAT_VALUE> </UseInputEvent> <UseInputEvent ID="HANDLING"> <KNOB_ID>#KNOB_Y_ID#</KNOB_ID> <TT_DESCRIPTION_ID>#TT_DESCRIPTION_ID_PAN_X#</TT_DESCRIPTION_ID> <TT_ICON>MOVE_AXIS</TT_ICON> <TT_INTERACTION>PRIMARY_DOWN+Y_AXIS</TT_INTERACTION> <TT_INTERACTION_LOCKABLE>Y_AXIS</TT_INTERACTION_LOCKABLE> <SET_STATE_EXTERNAL>0 > if{ (>K:ELEV_TRIM_UP) } els{ (>K:ELEV_TRIM_DN) } (A:AUTOPILOT DISENGAGED, Bool) ! if{ 1 (>K:AUTOPILOT_DISENGAGE_SET) }</SET_STATE_EXTERNAL> <BINDING_INC_0>Up</BINDING_INC_0> <BINDING_INC_0_PARAM_0>1</BINDING_INC_0_PARAM_0> <BINDING_DEC_0>Down</BINDING_DEC_0> <BINDING_DEC_0_PARAM_0>1</BINDING_DEC_0_PARAM_0> <NO_ANIM_VAR_UPDATE>True</NO_ANIM_VAR_UPDATE> <GET_TT_VALUE_STATE>(A:ELEVATOR TRIM POSITION, degrees)</GET_TT_VALUE_STATE> <FORMAT_VALUE>'%.1f°' @sprintf</FORMAT_VALUE> </UseInputEvent> <UseTemplate Name="ASOBO_GT_Joystick_Interaction_Knob"> <JOYSTICK_INTERACTION>PAN_ONLY</JOYSTICK_INTERACTION> <UPDATE_FREQUENCY>20</UPDATE_FREQUENCY> <COUNT>36</COUNT> <THRESHOLD_X_INPUT>0.1</THRESHOLD_X_INPUT> <THRESHOLD_X_MOUSE>0.01</THRESHOLD_X_MOUSE> <THRESHOLD_Y_INPUT>0.1</THRESHOLD_Y_INPUT> <THRESHOLD_Y_MOUSE>0.01</THRESHOLD_Y_MOUSE> <TIMEOUT_DELAY_RESET_AXIS>0.25</TIMEOUT_DELAY_RESET_AXIS> <IM_DRAG_ADDITIONAL_EVENT_HANDLING/> <WWISE_JOYSTICK_EVENT_L>handling_yawpitch_joystick</WWISE_JOYSTICK_EVENT_L> <WWISE_JOYSTICK_EVENT_R>handling_yawpitch_joystick</WWISE_JOYSTICK_EVENT_R> <WWISE_JOYSTICK_EVENT_UP>handling_yawpitch_joystick</WWISE_JOYSTICK_EVENT_UP> <WWISE_JOYSTICK_EVENT_DN>handling_yawpitch_joystick</WWISE_JOYSTICK_EVENT_DN> </UseTemplate> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID (using ID)
- ANIM_NAME_L_R (using ID)
- ANIM_NAME_DN_UP (using ID)
- INPUT_EVENT_ID_SOURCE
-
Default
Parameters set:
- VAR_NAME (using INPUT_EVENT_ID_SOURCE, ID)
- TT_DESCRIPTION_ID_PAN_X
- TT_DESCRIPTION_ID_PAN_Y
- TT_DESCRIPTION_ID_DISENGAGE
- TOOLTIP_TITLE_EXTERNAL
-
Override
Parameters set:
- KNOB_X_ID
- KNOB_Y_ID
- BTN_DISENGAGE_ID
-
Override
Parameters set:
- JOYSTICK_X_CODE_LEFT (using INPUT_EVENT_ID_SOURCE, KNOB_X_ID)
- JOYSTICK_X_CODE_RIGHT (using INPUT_EVENT_ID_SOURCE, KNOB_X_ID)
- JOYSTICK_Y_CODE_DOWN (using INPUT_EVENT_ID_SOURCE, KNOB_Y_ID)
- JOYSTICK_Y_CODE_UP (using INPUT_EVENT_ID_SOURCE, KNOB_Y_ID)
- LEFT_SINGLE_CODE_DEFAULT_IM (using INPUT_EVENT_ID_SOURCE, BTN_DISENGAGE_ID)
- LEFT_RELEASE_CODE_DEFAULT_IM (using INPUT_EVENT_ID_SOURCE, BTN_DISENGAGE_ID)
- LEFT_SINGLE_CODE_DRAG_IM (using INPUT_EVENT_ID_SOURCE, BTN_DISENGAGE_ID)
- LEFT_RELEASE_CODE_DRAG_IM (using INPUT_EVENT_ID_SOURCE, BTN_DISENGAGE_ID)
Parameters read:
- NODE_ID
Components:
-
#NODE_ID# (Node: #NODE_ID#)
Parameters set:
- TOOLTIP_TITLE (using TOOLTIP_TITLE_EXTERNAL)
- TOOLTIP_ENTRY_0 (using INPUT_EVENT_ID_SOURCE, KNOB_X_ID)
- TOOLTIP_ENTRY_1 (using INPUT_EVENT_ID_SOURCE, KNOB_Y_ID)
- BTN_ID (using BTN_DISENGAGE_ID)
- TT_DESCRIPTION_ID (using TT_DESCRIPTION_ID_DISENGAGE)
- BINDING_INC_0
- BINDING_INC_0_PARAM_0
- BINDING_DEC_0
- BINDING_DEC_0_PARAM_0
- SET_STATE_EXTERNAL
- ANIM_EXTERNAL
- KNOB_ID (using KNOB_X_ID)
- TT_DESCRIPTION_ID (using TT_DESCRIPTION_ID_PAN_X)
- TT_ICON
- NO_ANIM_VAR_UPDATE
- GET_TT_VALUE_STATE
- FORMAT_VALUE
- KNOB_ID (using KNOB_Y_ID)
- TT_INTERACTION
- TT_INTERACTION_LOCKABLE
Templates used:
-
ASOBO_GT_Joystick_Interaction_Knob
Parameters set:
- JOYSTICK_INTERACTION
- UPDATE_FREQUENCY
- COUNT
- THRESHOLD_X_INPUT
- THRESHOLD_X_MOUSE
- THRESHOLD_Y_INPUT
- THRESHOLD_Y_MOUSE
- TIMEOUT_DELAY_RESET_AXIS
- IM_DRAG_ADDITIONAL_EVENT_HANDLING
- WWISE_JOYSTICK_EVENT_L
- WWISE_JOYSTICK_EVENT_R
- WWISE_JOYSTICK_EVENT_UP
- WWISE_JOYSTICK_EVENT_DN
-
Default
-
ASOBO_HANDLING_Timer_SubTemplate
Definition from XML<Template Name="ASOBO_HANDLING_Timer_SubTemplate"> <Parameters Type="Default"> <NODE_ID>HANDLING_#INTERACTION_TYPE#_Timer</NODE_ID> <ANIM_NAME>HANDLING_#INTERACTION_TYPE#_Timer</ANIM_NAME> <WWISE_EVENT_1>yoke_push_button_on</WWISE_EVENT_1> <WWISE_EVENT_2>yoke_push_button_off</WWISE_EVENT_2> <TOOLTIP_TITLE>@TT_Package.YOKE_PUSH_TIMER_TITLE</TOOLTIP_TITLE> <TT_DESCRIPTION_ID>@TT_Package.YOKE_PUSH_TIMER_ACTION</TT_DESCRIPTION_ID> </Parameters> <Parameters Type="Override"> <BTN_ID>Timer_Button</BTN_ID> </Parameters> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <UseInputEvent ID="HANDLING"> <SET_STATE_EXTERNAL>if{ (>H:AS1000_PFD_1_TIMER) }</SET_STATE_EXTERNAL> <BINDING_INC_0>Push</BINDING_INC_0> <BINDING_INC_0_PARAM_0>1</BINDING_INC_0_PARAM_0> </UseInputEvent> <UseTemplate Name="ASOBO_GT_Push_Button"> <TOOLTIP_ENTRY_0>HANDLING_#BTN_ID#</TOOLTIP_ENTRY_0> <LEFT_SINGLE_CODE>(>B:HANDLING_#BTN_ID#_Push)</LEFT_SINGLE_CODE> </UseTemplate> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID (using INTERACTION_TYPE)
- ANIM_NAME (using INTERACTION_TYPE)
- WWISE_EVENT_1
- WWISE_EVENT_2
- TOOLTIP_TITLE
- TT_DESCRIPTION_ID
-
Override
Parameters set:
- BTN_ID
Parameters read:
- NODE_ID
Components:
-
#NODE_ID# (Node: #NODE_ID#)
Parameters set:
- SET_STATE_EXTERNAL
- BINDING_INC_0
- BINDING_INC_0_PARAM_0
Templates used:
-
ASOBO_GT_Push_Button
Parameters set:
- TOOLTIP_ENTRY_0 (using BTN_ID)
- LEFT_SINGLE_CODE (using BTN_ID)
-
Default
-
ASOBO_HANDLING_StormClear_SubTemplate
Definition from XML<Template Name="ASOBO_HANDLING_StormClear_SubTemplate"> <Parameters Type="Default"> <NODE_ID>HANDLING_#INTERACTION_TYPE#_StormClear</NODE_ID> <ANIM_NAME>HANDLING_#INTERACTION_TYPE#_StormClear</ANIM_NAME> <WWISE_EVENT_1>yoke_push_button_on</WWISE_EVENT_1> <WWISE_EVENT_2>yoke_push_button_off</WWISE_EVENT_2> </Parameters> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <UseTemplate Name="ASOBO_GT_Push_Button"> <LEFT_SINGLE_CODE/> <TOOLTIPID>TT:COCKPIT.TOOLTIPS.INOP</TOOLTIPID> </UseTemplate> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID (using INTERACTION_TYPE)
- ANIM_NAME (using INTERACTION_TYPE)
- WWISE_EVENT_1
- WWISE_EVENT_2
Parameters read:
- NODE_ID
Components:
-
#NODE_ID# (Node: #NODE_ID#)
Templates used:
-
ASOBO_GT_Push_Button
Parameters set:
- LEFT_SINGLE_CODE
- TOOLTIPID
-
ASOBO_GT_Push_Button
-
Default
-
ASOBO_HANDLING_CWS_SubTemplate
Definition from XML<Template Name="ASOBO_HANDLING_CWS_SubTemplate"> <Parameters Type="Default"> <NODE_ID>HANDLING_#INTERACTION_TYPE#_CWS</NODE_ID> <ANIM_NAME>HANDLING_#INTERACTION_TYPE#_CWS</ANIM_NAME> <WWISE_EVENT_1>yoke_push_button_on</WWISE_EVENT_1> <WWISE_EVENT_2>yoke_push_button_off</WWISE_EVENT_2> </Parameters> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <UseTemplate Name="ASOBO_GT_Push_Button"> <LEFT_SINGLE_CODE/> <TOOLTIPID>TT:COCKPIT.TOOLTIPS.INOP</TOOLTIPID> </UseTemplate> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID (using INTERACTION_TYPE)
- ANIM_NAME (using INTERACTION_TYPE)
- WWISE_EVENT_1
- WWISE_EVENT_2
Parameters read:
- NODE_ID
Components:
-
#NODE_ID# (Node: #NODE_ID#)
Templates used:
-
ASOBO_GT_Push_Button
Parameters set:
- LEFT_SINGLE_CODE
- TOOLTIPID
-
ASOBO_GT_Push_Button
-
Default
-
ASOBO_HANDLING_Ident_SubTemplate
Definition from XML<Template Name="ASOBO_HANDLING_Ident_SubTemplate"> <Parameters Type="Default"> <NODE_ID>HANDLING_#INTERACTION_TYPE#_Ident</NODE_ID> <ANIM_NAME>HANDLING_#INTERACTION_TYPE#_Ident</ANIM_NAME> <WWISE_EVENT_1>yoke_push_button_on</WWISE_EVENT_1> <WWISE_EVENT_2>yoke_push_button_off</WWISE_EVENT_2> <TOOLTIP_TITLE>@TT_Package.YOKE_PUSH_IDENT_TITLE</TOOLTIP_TITLE> <TT_DESCRIPTION_ID>@TT_Package.YOKE_PUSH_IDENT_ACTION</TT_DESCRIPTION_ID> </Parameters> <Parameters Type="Override"> <BTN_ID>Radio_NAV#ID#_Swap</BTN_ID> </Parameters> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <UseInputEvent ID="HANDLING"> <SET_STATE_EXTERNAL>if{ (>K:RADIO_VOR#ID#_IDENT_TOGGLE) }</SET_STATE_EXTERNAL> <BINDING_INC_0>Push</BINDING_INC_0> <BINDING_INC_0_PARAM_0>1</BINDING_INC_0_PARAM_0> </UseInputEvent> <UseTemplate Name="ASOBO_GT_Push_Button_Held"> <TOOLTIP_ENTRY_0>HANDLING_#BTN_ID#</TOOLTIP_ENTRY_0> <LEFT_SINGLE_CODE>(>B:HANDLING_#BTN_ID#_Push)</LEFT_SINGLE_CODE> </UseTemplate> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID (using INTERACTION_TYPE)
- ANIM_NAME (using INTERACTION_TYPE)
- WWISE_EVENT_1
- WWISE_EVENT_2
- TOOLTIP_TITLE
- TT_DESCRIPTION_ID
-
Override
Parameters set:
- BTN_ID (using ID)
Parameters read:
- NODE_ID
Components:
-
#NODE_ID# (Node: #NODE_ID#)
Parameters set:
- SET_STATE_EXTERNAL (using ID)
- BINDING_INC_0
- BINDING_INC_0_PARAM_0
Templates used:
-
ASOBO_GT_Push_Button_Held
Parameters set:
- TOOLTIP_ENTRY_0 (using BTN_ID)
- LEFT_SINGLE_CODE (using BTN_ID)
-
Default
-
ASOBO_HANDLING_Swap_SubTemplate
Definition from XML<Template Name="ASOBO_HANDLING_Swap_SubTemplate"> <Parameters Type="Default"> <NODE_ID>HANDLING_#INTERACTION_TYPE#_Swap</NODE_ID> <ANIM_NAME>HANDLING_#INTERACTION_TYPE#_Swap</ANIM_NAME> <WWISE_EVENT_1>yoke_push_button_on</WWISE_EVENT_1> <WWISE_EVENT_2>yoke_push_button_off</WWISE_EVENT_2> <TOOLTIP_TITLE>@TT_Package.AIRLINER_COM_PUSH_SWAP_TITLE</TOOLTIP_TITLE> <TT_DESCRIPTION_ID>@TT_Package.AIRLINER_COM_PUSH_SWAP_ACTION</TT_DESCRIPTION_ID> </Parameters> <Parameters Type="Override"> <BTN_ID>Radio_COM#ID#_Swap</BTN_ID> </Parameters> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <UseInputEvent ID="HANDLING"> <SET_STATE_EXTERNAL>if{ (>K:COM#ID#_RADIO_SWAP) }</SET_STATE_EXTERNAL> <BINDING_INC_0>Push</BINDING_INC_0> <BINDING_INC_0_PARAM_0>1</BINDING_INC_0_PARAM_0> </UseInputEvent> <UseTemplate Name="ASOBO_GT_Push_Button_Held"> <TOOLTIP_ENTRY_0>HANDLING_#BTN_ID#</TOOLTIP_ENTRY_0> <LEFT_SINGLE_CODE>(>B:HANDLING_#BTN_ID#_Push)</LEFT_SINGLE_CODE> </UseTemplate> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID (using INTERACTION_TYPE)
- ANIM_NAME (using INTERACTION_TYPE)
- WWISE_EVENT_1
- WWISE_EVENT_2
- TOOLTIP_TITLE
- TT_DESCRIPTION_ID
-
Override
Parameters set:
- BTN_ID (using ID)
Parameters read:
- NODE_ID
Components:
-
#NODE_ID# (Node: #NODE_ID#)
Parameters set:
- SET_STATE_EXTERNAL (using ID)
- BINDING_INC_0
- BINDING_INC_0_PARAM_0
Templates used:
-
ASOBO_GT_Push_Button_Held
Parameters set:
- TOOLTIP_ENTRY_0 (using BTN_ID)
- LEFT_SINGLE_CODE (using BTN_ID)
-
Default
-
ASOBO_HANDLING_AntiSkid_SubTemplate
Definition from XML<Template Name="ASOBO_HANDLING_AntiSkid_SubTemplate"> <Parameters Type="Default"> <NODE_ID>HANDLING_#INTERACTION_TYPE#_AntiSkid</NODE_ID> <ANIM_NAME>HANDLING_#INTERACTION_TYPE#_AntiSkid</ANIM_NAME> <WWISE_EVENT_1>antiskid_switch_on</WWISE_EVENT_1> <WWISE_EVENT_2>antiskid_switch_off</WWISE_EVENT_2> <ON_ANTI_SKID_STATE_CHANGED>(A:ANTISKID BRAKES ACTIVE, Bool) ! if{ 0 (>L:HANDLING_Autobrakes_Position) }</ON_ANTI_SKID_STATE_CHANGED> <TOOLTIP_TITLE>@TT_Package.LANDING_GEAR_SWITCH_AUTOBKR_ASKID_TITLE</TOOLTIP_TITLE> <TT_DESCRIPTION_ID>@TT_Package.LANDING_GEAR_SWITCH_AUTOBKR_ASKID_ACTION</TT_DESCRIPTION_ID> </Parameters> <Parameters Type="Override"> <BTN_ID>Anti_Skid</BTN_ID> </Parameters> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <UseInputEvent ID="HANDLING"> <SET_STATE_EXTERNAL>p0 (A:ANTISKID BRAKES ACTIVE, Bool) != if{ (>K:ANTISKID_BRAKES_TOGGLE) } #ON_ANTI_SKID_STATE_CHANGED#</SET_STATE_EXTERNAL> <GET_STATE_EXTERNAL>(A:ANTISKID BRAKES ACTIVE, Bool) sp0</GET_STATE_EXTERNAL> <SIM_STATE_IS_ON_EXTERNAL>l0</SIM_STATE_IS_ON_EXTERNAL> </UseInputEvent> <UseTemplate Name="ASOBO_GT_Switch_Code"> <TOOLTIP_ENTRY_0>HANDLING_#BTN_ID#</TOOLTIP_ENTRY_0> <LEFT_SINGLE_CODE>(>B:HANDLING_#BTN_ID#_Toggle)</LEFT_SINGLE_CODE> <ANIM_CODE>(B:HANDLING_#BTN_ID#, Bool) 100 *</ANIM_CODE> </UseTemplate> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID (using INTERACTION_TYPE)
- ANIM_NAME (using INTERACTION_TYPE)
- WWISE_EVENT_1
- WWISE_EVENT_2
- ON_ANTI_SKID_STATE_CHANGED
- TOOLTIP_TITLE
- TT_DESCRIPTION_ID
-
Override
Parameters set:
- BTN_ID
Parameters read:
- NODE_ID
Components:
-
#NODE_ID# (Node: #NODE_ID#)
Parameters set:
- SET_STATE_EXTERNAL (using ON_ANTI_SKID_STATE_CHANGED)
- GET_STATE_EXTERNAL
- SIM_STATE_IS_ON_EXTERNAL
Templates used:
-
ASOBO_GT_Switch_Code
Parameters set:
- TOOLTIP_ENTRY_0 (using BTN_ID)
- LEFT_SINGLE_CODE (using BTN_ID)
- ANIM_CODE (using BTN_ID)
-
Default
-
ASOBO_HANDLING_GLimiter_SubTemplate
Definition from XML<Template Name="ASOBO_HANDLING_GLimiter_SubTemplate"> <Parameters Type="Default"> <NODE_ID>HANDLING_#INTERACTION_TYPE#_GLimiter</NODE_ID> <ANIM_NAME>HANDLING_#INTERACTION_TYPE#_GLimiter</ANIM_NAME> <TOOLTIP_TITLE>@TT_Package.GLIMITER_SWITCH_TITLE</TOOLTIP_TITLE> <TT_DESCRIPTION_ID>@TT_Package.GLIMITER_SWITCH_ACTION</TT_DESCRIPTION_ID> <OVERRIDE_CONDITIONS>p0 1 ==</OVERRIDE_CONDITIONS> <ADDITIONAL_EFFECTS/> </Parameters> <Parameters Type="Override"> <Switch Param="TYPE"> <Case Value="AS04F"> <OVERRIDE_CONDITIONS>#OVERRIDE_CONDITIONS# (A:YOKE Y POSITION, Percent over 100) 0.8 > and</OVERRIDE_CONDITIONS> <ADDITIONAL_EFFECTS>p0 (>K:AUTOPILOT_DISENGAGE_SET) 0 (>K:NOSE_WHEEL_STEERING_LIMIT_SET)</ADDITIONAL_EFFECTS> </Case> </Switch> </Parameters> <Parameters Type="Override"> <BTN_ID>GLimiter</BTN_ID> <Switch Param="TYPE"> <Case Value="AS04F"> <SET_STATE_EXTERNAL>#OVERRIDE_CONDITIONS# if{ 2 } els{ 1 } (>K:G_LIMITER_SET) #ADDITIONAL_EFFECTS#</SET_STATE_EXTERNAL> <GET_STATE_EXTERNAL>(A:G LIMITER SETTING, Enum) 2 == sp0</GET_STATE_EXTERNAL> </Case> </Switch> </Parameters> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <Switch Param="TYPE"> <Case Value="AS04F"> <UseTemplate Name="ASOBO_GT_Update"> <FREQUENCY>2</FREQUENCY> <UPDATE_CODE> (B:HANDLING_#BTN_ID#) (A:YOKE Y POSITION, Percent over 100) abs 0.1 < and if{ 1 (>K:G_LIMITER_SET) 0 (>K:AUTOPILOT_DISENGAGE_SET) 0 (>B:HANDLING_#BTN_ID#) } </UPDATE_CODE> </UseTemplate> </Case> </Switch> <UseTemplate Name="ASOBO_HANDLING_Base_Template"> <IE_NAME>#BTN_ID#</IE_NAME> <CREATE_COMPONENT>False</CREATE_COMPONENT> <SIM_STATE_IS_ON_EXTERNAL>l0</SIM_STATE_IS_ON_EXTERNAL> <BINDING_SET_0>Toggle</BINDING_SET_0> <BINDING_SET_0_PARAM_0>(B:HANDLING_#BTN_ID#) !</BINDING_SET_0_PARAM_0> <BINDING_SET_0_PARAM_0_IS_DYNAMIC>True</BINDING_SET_0_PARAM_0_IS_DYNAMIC> <BINDING_SET_0_EVENT_ID>G_LIMITER_TOGGLE</BINDING_SET_0_EVENT_ID> <BINDING_SET_1>KeySet</BINDING_SET_1> <BINDING_SET_1_PARAM_0>p0 0 !=</BINDING_SET_1_PARAM_0> <BINDING_SET_1_PARAM_0_IS_DYNAMIC>True</BINDING_SET_1_PARAM_0_IS_DYNAMIC> <BINDING_SET_1_EVENT_ID>G_LIMITER_SET</BINDING_SET_1_EVENT_ID> <BINDING_SET_2>On</BINDING_SET_2> <BINDING_SET_2_PARAM_0>1</BINDING_SET_2_PARAM_0> <BINDING_SET_2_EVENT_ID>G_LIMITER_ON</BINDING_SET_2_EVENT_ID> <BINDING_SET_3>Off</BINDING_SET_3> <BINDING_SET_3_PARAM_0>0</BINDING_SET_3_PARAM_0> <BINDING_SET_3_EVENT_ID>G_LIMITER_OFF</BINDING_SET_3_EVENT_ID> <SIMVAR_TO_WATCH_0>G LIMITER SETTING</SIMVAR_TO_WATCH_0> </UseTemplate> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID (using INTERACTION_TYPE)
- ANIM_NAME (using INTERACTION_TYPE)
- TOOLTIP_TITLE
- TT_DESCRIPTION_ID
- OVERRIDE_CONDITIONS
- ADDITIONAL_EFFECTS
-
Override
Condition: Switch(TYPE)
-
Case: AS04F
Parameters set:
- OVERRIDE_CONDITIONS (using OVERRIDE_CONDITIONS)
- ADDITIONAL_EFFECTS
-
-
Override
Parameters set:
- BTN_ID
Condition: Switch(TYPE)
-
Case: AS04F
Parameters set:
- SET_STATE_EXTERNAL (using OVERRIDE_CONDITIONS, ADDITIONAL_EFFECTS)
- GET_STATE_EXTERNAL
Parameters read:
- NODE_ID
Components:
-
#NODE_ID# (Node: #NODE_ID#)
Templates used:
-
ASOBO_HANDLING_Base_Template
Parameters set:
- IE_NAME (using BTN_ID)
- CREATE_COMPONENT
- SIM_STATE_IS_ON_EXTERNAL
- BINDING_SET_0
- BINDING_SET_0_PARAM_0 (using BTN_ID)
- BINDING_SET_0_PARAM_0_IS_DYNAMIC
- BINDING_SET_0_EVENT_ID
- BINDING_SET_1
- BINDING_SET_1_PARAM_0
- BINDING_SET_1_PARAM_0_IS_DYNAMIC
- BINDING_SET_1_EVENT_ID
- BINDING_SET_2
- BINDING_SET_2_PARAM_0
- BINDING_SET_2_EVENT_ID
- BINDING_SET_3
- BINDING_SET_3_PARAM_0
- BINDING_SET_3_EVENT_ID
- SIMVAR_TO_WATCH_0
Condition: Switch(TYPE)
-
Case: AS04F
Templates used:
-
ASOBO_GT_Update
Parameters set:
- FREQUENCY
- UPDATE_CODE (using BTN_ID)
-
ASOBO_GT_Update
-
ASOBO_HANDLING_Base_Template
-
Default
-
ASOBO_HANDLING_Steering_Tiller_SubTemplate
Definition from XML<Template Name="ASOBO_HANDLING_Steering_Tiller_SubTemplate"> <DefaultTemplateParameters> <NODE_ID>HANDLING_Steering_Tiller_#ID#</NODE_ID> <ANIM_NAME>HANDLING_Steering_Tiller_#ID#</ANIM_NAME> </DefaultTemplateParameters> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <UseTemplate Name="ASOBO_GT_Anim_Code"> <ANIM_CODE> (A:SIM ON GROUND, Bool) if{ (A:GEAR STEER ANGLE PCT, Percent) 100 + } els{ (A:STEER INPUT CONTROL, Percent) 100 + } </ANIM_CODE> <ANIM_LENGTH>200</ANIM_LENGTH> </UseTemplate> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID (using ID)
- ANIM_NAME (using ID)
Parameters read:
- NODE_ID
Components:
-
#NODE_ID# (Node: #NODE_ID#)
Templates used:
-
ASOBO_GT_Anim_Code
Parameters set:
- ANIM_CODE
- ANIM_LENGTH
-
ASOBO_GT_Anim_Code
-
Default
-
ASOBO_HANDLING_RudderPedals_SubTemplate
Definition from XML<Template Name="ASOBO_HANDLING_RudderPedals_SubTemplate"> <DefaultTemplateParameters> <ANIM_NAME>HANDLING_RudderPedals</ANIM_NAME> <ANIM_LAG>400</ANIM_LAG> <Switch Param="RUDDERPEDALS_TYPE"> <Case Value="SPLITTED"> <Condition Valid="DIFFERENTIATE_BRAKE_ANIM_L_R"> <True> <NODE_ID>HANDLING_RudderPedals_Left_1_1</NODE_ID> <PREFIX_LEFT_PEDALS>HANDLING_RudderPedals_Left_</PREFIX_LEFT_PEDALS> <SUFFIX_LEFT_PEDALS>_1</SUFFIX_LEFT_PEDALS> <PREFIX_RIGHT_PEDALS>HANDLING_RudderPedals_Right_</PREFIX_RIGHT_PEDALS> <SUFFIX_RIGHT_PEDALS>_2</SUFFIX_RIGHT_PEDALS> </True> <False> <NODE_ID>HANDLING_RudderPedals_#ID#_1</NODE_ID> <PART_ID>HANDLING_RudderPedals</PART_ID> <NODE_ID2>HANDLING_RudderPedals_#ID#_2</NODE_ID2> </False> </Condition> </Case> <Case Value="MERGED"> <NODE_ID>HANDLING_RudderPedals_1</NODE_ID> <NODE_ID_L_BRAKE>HANDLING_RudderPedals_1_Brake</NODE_ID_L_BRAKE> <NODE_ID_L_RUDDER>HANDLING_RudderPedals_1_Rudder</NODE_ID_L_RUDDER> <NODE_ID_R_BRAKE>HANDLING_RudderPedals_2_Brake</NODE_ID_R_BRAKE> <NODE_ID_R_RUDDER>HANDLING_RudderPedals_2_Rudder</NODE_ID_R_RUDDER> <PART_ID_BRAKES>HANDLING_RudderPedals_Brake</PART_ID_BRAKES> <PART_ID_RUDDERS>HANDLING_RudderPedals_Rudder</PART_ID_RUDDERS> <USE_BRAKE>True</USE_BRAKE> </Case> <Case Value="MIXED"> <NODE_ID>HANDLING_RudderPedals_1</NODE_ID> <NODE_ID_L_BRAKE_1>HANDLING_RudderPedals_1_1_Brake</NODE_ID_L_BRAKE_1> <NODE_ID_L_BRAKE_2>HANDLING_RudderPedals_2_1_Brake</NODE_ID_L_BRAKE_2> <NODE_ID_R_BRAKE_1>HANDLING_RudderPedals_1_2_Brake</NODE_ID_R_BRAKE_1> <NODE_ID_R_BRAKE_2>HANDLING_RudderPedals_2_2_Brake</NODE_ID_R_BRAKE_2> <NODE_ID_L_RUDDER>HANDLING_RudderPedals_1</NODE_ID_L_RUDDER> <NODE_ID_R_RUDDER>HANDLING_RudderPedals_2</NODE_ID_R_RUDDER> <PART_ID_BRAKES>HANDLING_RudderPedals</PART_ID_BRAKES> <PART_ID_RUDDERS>HANDLING_RudderPedals</PART_ID_RUDDERS> <DIFFERENTIATE_BRAKE_ANIM_L_R>True</DIFFERENTIATE_BRAKE_ANIM_L_R> <USE_BRAKE>True</USE_BRAKE> </Case> <Default> <PART_ID>HANDLING_RudderPedals</PART_ID> <NODE_ID>HANDLING_RudderPedals_#ID#</NODE_ID> </Default> </Switch> </DefaultTemplateParameters> <OverrideTemplateParameters> <Switch Param="RUDDERPEDALS_TYPE"> <Case Value="SPLITTED"> <Condition Valid="DIFFERENTIATE_BRAKE_ANIM_L_R"> <True> <PART_ID>HANDLING_RudderPedals</PART_ID> <EXIT_TEMPLATE>ASOBO_GT_Highlight_Template</EXIT_TEMPLATE> <MAX_ID>2</MAX_ID> <PARAM1>HIGHLIGHT_NODE_ID</PARAM1> </True> </Condition> </Case> </Switch> </OverrideTemplateParameters> <Switch Param="RUDDERPEDALS_TYPE"> <Case Value="SPLITTED"> <Condition Valid="DIFFERENTIATE_BRAKE_ANIM_L_R"> <True> <Component ID="HANDLING_RudderPedals_Highlights"> <UseTemplate Name="ASOBO_GT_Helper_Recursive_ID"> <ID>1</ID> <PARAM1_PREFIX>#PREFIX_LEFT_PEDALS#</PARAM1_PREFIX> <PARAM1_SUFFIX>#SUFFIX_LEFT_PEDALS#</PARAM1_SUFFIX> </UseTemplate> <UseTemplate Name="ASOBO_GT_Helper_Recursive_ID"> <ID>2</ID> <PARAM1_PREFIX>#PREFIX_RIGHT_PEDALS#</PARAM1_PREFIX> <PARAM1_SUFFIX>#SUFFIX_RIGHT_PEDALS#</PARAM1_SUFFIX> </UseTemplate> </Component> </True> <False> <UseTemplate Name="ASOBO_GT_ComponentWith_PART_ID"> <NODE_ID>#NODE_ID2#</NODE_ID> <ID>2</ID> </UseTemplate> </False> </Condition> </Case> <Case Value="MERGED"> <Condition Valid="NO_BRAKES_HIGHLIGHT"> <False> <UseTemplate Name="ASOBO_GT_Highlight_Template"> <HIGHLIGHT_NODE_ID>#NODE_ID_L_BRAKE#</HIGHLIGHT_NODE_ID> <PART_ID>#PART_ID_BRAKES#</PART_ID> </UseTemplate> <UseTemplate Name="ASOBO_GT_Highlight_Template"> <HIGHLIGHT_NODE_ID>#NODE_ID_R_BRAKE#</HIGHLIGHT_NODE_ID> <PART_ID>#PART_ID_BRAKES#</PART_ID> </UseTemplate> </False> </Condition> <UseTemplate Name="ASOBO_GT_Highlight_Template"> <HIGHLIGHT_NODE_ID>#NODE_ID_L_RUDDER#</HIGHLIGHT_NODE_ID> <PART_ID>#PART_ID_RUDDERS#</PART_ID> </UseTemplate> <UseTemplate Name="ASOBO_GT_Highlight_Template"> <HIGHLIGHT_NODE_ID>#NODE_ID_R_RUDDER#</HIGHLIGHT_NODE_ID> <PART_ID>#PART_ID_RUDDERS#</PART_ID> </UseTemplate> </Case> <Case Value="MIXED"> <Condition Valid="NO_BRAKES_HIGHLIGHT"> <False> <UseTemplate Name="ASOBO_GT_Highlight_Template"> <HIGHLIGHT_NODE_ID>#NODE_ID_L_BRAKE_1#</HIGHLIGHT_NODE_ID> <PART_ID>#PART_ID_BRAKES#</PART_ID> </UseTemplate> <UseTemplate Name="ASOBO_GT_Highlight_Template"> <HIGHLIGHT_NODE_ID>#NODE_ID_L_BRAKE_2#</HIGHLIGHT_NODE_ID> <PART_ID>#PART_ID_BRAKES#</PART_ID> </UseTemplate> <UseTemplate Name="ASOBO_GT_Highlight_Template"> <HIGHLIGHT_NODE_ID>#NODE_ID_R_BRAKE_1#</HIGHLIGHT_NODE_ID> <PART_ID>#PART_ID_BRAKES#</PART_ID> </UseTemplate> <UseTemplate Name="ASOBO_GT_Highlight_Template"> <HIGHLIGHT_NODE_ID>#NODE_ID_R_BRAKE_2#</HIGHLIGHT_NODE_ID> <PART_ID>#PART_ID_BRAKES#</PART_ID> </UseTemplate> </False> </Condition> <UseTemplate Name="ASOBO_GT_Highlight_Template"> <HIGHLIGHT_NODE_ID>#NODE_ID_L_RUDDER#</HIGHLIGHT_NODE_ID> <PART_ID>#PART_ID_RUDDERS#</PART_ID> </UseTemplate> <UseTemplate Name="ASOBO_GT_Highlight_Template"> <HIGHLIGHT_NODE_ID>#NODE_ID_R_RUDDER#</HIGHLIGHT_NODE_ID> <PART_ID>#PART_ID_RUDDERS#</PART_ID> </UseTemplate> </Case> </Switch> <Condition Check="DONT_CREATE_ANIMATION"> <True> <UseTemplate Name="ASOBO_GT_ComponentWith_PART_ID"> <ID>1</ID> </UseTemplate> </True> <False> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <DefaultTemplateParameters> <ANIM_SIMVAR>RUDDER PEDAL POSITION</ANIM_SIMVAR> <Condition Valid="USE_BRAKE"> <Condition Valid="DIFFERENTIATE_BRAKE_ANIM_L_R"> <True> <BRAKE_ANIM_NAME_L>HANDLING_RudderPedals_Brake_L</BRAKE_ANIM_NAME_L> <BRAKE_ANIM_NAME_R>HANDLING_RudderPedals_Brake_R</BRAKE_ANIM_NAME_R> </True> <False> <BRAKE_ANIM_NAME>HANDLING_RudderPedals_Brake</BRAKE_ANIM_NAME> </False> </Condition> </Condition> </DefaultTemplateParameters> <OverrideTemplateParameters> <Condition Valid="NO_PART_ID_ON_ANIM_NODE"> <PART_ID/> </Condition> </OverrideTemplateParameters> <UseTemplate Name="ASOBO_GT_Anim_Sim"> <ID>1</ID> <ANIM_LENGTH>200</ANIM_LENGTH> <ANIM_SIMVAR_UNITS>percent</ANIM_SIMVAR_UNITS> <ANIM_SIMVAR_BIAS>100</ANIM_SIMVAR_BIAS> </UseTemplate> <Condition Valid="USE_BRAKE"> <UseTemplate Name="ASOBO_HANDLING_RudderPedals_Brake_Template"> <Condition Valid="DIFFERENTIATE_BRAKE_ANIM_L_R"> <True> <ANIM_NAME_L>#BRAKE_ANIM_NAME_L#</ANIM_NAME_L> <ANIM_NAME_R>#BRAKE_ANIM_NAME_R#</ANIM_NAME_R> </True> <False> <ANIM_NAME>#BRAKE_ANIM_NAME#</ANIM_NAME> </False> </Condition> </UseTemplate> </Condition> </Component> </False> </Condition> </Template>Parameters initialization:
-
Default
Parameters set:
- ANIM_NAME
- ANIM_LAG
Condition: Switch(RUDDERPEDALS_TYPE)
-
Case: SPLITTED
Condition: Valid(DIFFERENTIATE_BRAKE_ANIM_L_R)
-
Case: True
Parameters set:
- NODE_ID
- PREFIX_LEFT_PEDALS
- SUFFIX_LEFT_PEDALS
- PREFIX_RIGHT_PEDALS
- SUFFIX_RIGHT_PEDALS
-
Case: False
Parameters set:
- NODE_ID (using ID)
- PART_ID
- NODE_ID2 (using ID)
-
-
Case: MERGED
Parameters set:
- NODE_ID
- NODE_ID_L_BRAKE
- NODE_ID_L_RUDDER
- NODE_ID_R_BRAKE
- NODE_ID_R_RUDDER
- PART_ID_BRAKES
- PART_ID_RUDDERS
- USE_BRAKE
-
Case: MIXED
Parameters set:
- NODE_ID
- NODE_ID_L_BRAKE_1
- NODE_ID_L_BRAKE_2
- NODE_ID_R_BRAKE_1
- NODE_ID_R_BRAKE_2
- NODE_ID_L_RUDDER
- NODE_ID_R_RUDDER
- PART_ID_BRAKES
- PART_ID_RUDDERS
- DIFFERENTIATE_BRAKE_ANIM_L_R
- USE_BRAKE
-
Default case:
Parameters set:
- PART_ID
- NODE_ID (using ID)
-
Override
Condition: Switch(RUDDERPEDALS_TYPE)
-
Case: SPLITTED
Condition: Valid(DIFFERENTIATE_BRAKE_ANIM_L_R)
-
Case: True
Parameters set:
- PART_ID
- EXIT_TEMPLATE
- MAX_ID
- PARAM1
-
-
Condition: Switch(RUDDERPEDALS_TYPE)
-
Case: SPLITTED
Condition: Valid(DIFFERENTIATE_BRAKE_ANIM_L_R)
-
Case: True
Components:
-
HANDLING_RudderPedals_Highlights
Templates used:
-
ASOBO_GT_Helper_Recursive_ID
Parameters set:
- ID
- PARAM1_PREFIX (using PREFIX_LEFT_PEDALS)
- PARAM1_SUFFIX (using SUFFIX_LEFT_PEDALS)
-
ASOBO_GT_Helper_Recursive_ID
Parameters set:
- ID
- PARAM1_PREFIX (using PREFIX_RIGHT_PEDALS)
- PARAM1_SUFFIX (using SUFFIX_RIGHT_PEDALS)
-
ASOBO_GT_Helper_Recursive_ID
-
HANDLING_RudderPedals_Highlights
-
Case: False
Templates used:
-
ASOBO_GT_ComponentWith_PART_ID
Parameters set:
- NODE_ID (using NODE_ID2)
- ID
-
ASOBO_GT_ComponentWith_PART_ID
-
-
Case: MERGED
Templates used:
-
ASOBO_GT_Highlight_Template
Parameters set:
- HIGHLIGHT_NODE_ID (using NODE_ID_L_RUDDER)
- PART_ID (using PART_ID_RUDDERS)
-
ASOBO_GT_Highlight_Template
Parameters set:
- HIGHLIGHT_NODE_ID (using NODE_ID_R_RUDDER)
- PART_ID (using PART_ID_RUDDERS)
Condition: Valid(NO_BRAKES_HIGHLIGHT)
-
Case: False
Templates used:
-
ASOBO_GT_Highlight_Template
Parameters set:
- HIGHLIGHT_NODE_ID (using NODE_ID_L_BRAKE)
- PART_ID (using PART_ID_BRAKES)
-
ASOBO_GT_Highlight_Template
Parameters set:
- HIGHLIGHT_NODE_ID (using NODE_ID_R_BRAKE)
- PART_ID (using PART_ID_BRAKES)
-
ASOBO_GT_Highlight_Template
-
ASOBO_GT_Highlight_Template
-
Case: MIXED
Templates used:
-
ASOBO_GT_Highlight_Template
Parameters set:
- HIGHLIGHT_NODE_ID (using NODE_ID_L_RUDDER)
- PART_ID (using PART_ID_RUDDERS)
-
ASOBO_GT_Highlight_Template
Parameters set:
- HIGHLIGHT_NODE_ID (using NODE_ID_R_RUDDER)
- PART_ID (using PART_ID_RUDDERS)
Condition: Valid(NO_BRAKES_HIGHLIGHT)
-
Case: False
Templates used:
-
ASOBO_GT_Highlight_Template
Parameters set:
- HIGHLIGHT_NODE_ID (using NODE_ID_L_BRAKE_1)
- PART_ID (using PART_ID_BRAKES)
-
ASOBO_GT_Highlight_Template
Parameters set:
- HIGHLIGHT_NODE_ID (using NODE_ID_L_BRAKE_2)
- PART_ID (using PART_ID_BRAKES)
-
ASOBO_GT_Highlight_Template
Parameters set:
- HIGHLIGHT_NODE_ID (using NODE_ID_R_BRAKE_1)
- PART_ID (using PART_ID_BRAKES)
-
ASOBO_GT_Highlight_Template
Parameters set:
- HIGHLIGHT_NODE_ID (using NODE_ID_R_BRAKE_2)
- PART_ID (using PART_ID_BRAKES)
-
ASOBO_GT_Highlight_Template
-
ASOBO_GT_Highlight_Template
Condition: Check(DONT_CREATE_ANIMATION)
-
Case: True
Templates used:
-
ASOBO_GT_ComponentWith_PART_ID
Parameters set:
- ID
-
ASOBO_GT_ComponentWith_PART_ID
-
Case: False
Parameters read:
- NODE_ID
Components:
-
#NODE_ID# (Node: #NODE_ID#)
Parameters set:
- ANIM_SIMVAR
Templates used:
-
ASOBO_GT_Anim_Sim
Parameters set:
- ID
- ANIM_LENGTH
- ANIM_SIMVAR_UNITS
- ANIM_SIMVAR_BIAS
Condition: Valid(USE_BRAKE)
-
Case: True
Condition: Valid(DIFFERENTIATE_BRAKE_ANIM_L_R)
-
Case: True
Parameters set:
- BRAKE_ANIM_NAME_L
- BRAKE_ANIM_NAME_R
-
Case: False
Parameters set:
- BRAKE_ANIM_NAME
-
Condition: Valid(NO_PART_ID_ON_ANIM_NODE)
-
Case: True
Parameters set:
- PART_ID
Condition: Valid(USE_BRAKE)
-
Case: True
Templates used:
-
ASOBO_HANDLING_RudderPedals_Brake_Template
Condition: Valid(DIFFERENTIATE_BRAKE_ANIM_L_R)
-
Case: True
Parameters set:
- ANIM_NAME_L (using BRAKE_ANIM_NAME_L)
- ANIM_NAME_R (using BRAKE_ANIM_NAME_R)
-
Case: False
Parameters set:
- ANIM_NAME (using BRAKE_ANIM_NAME)
-
-
ASOBO_HANDLING_RudderPedals_Brake_Template
-
Default
-
ASOBO_HANDLING_Light_Flaps_SubTemplate
Definition from XML<Template Name="ASOBO_HANDLING_Light_Flaps_SubTemplate"> <Parameters Type="Default"> <NODE_ID>HANDLING_Light_Flaps_#ID#</NODE_ID> <Switch Param="TYPE"> <Case Value="ALWAYS_ONE_LIT"> <ADJUSTED_ID_FLAP Process="Int">#ID# 0 max #MAX_FLAPS_INDEX# min</ADJUSTED_ID_FLAP> <FLAPS_INDEX_COUNT Process="Int">#MAX_FLAPS_INDEX# 1 +</FLAPS_INDEX_COUNT> <ANGLE_DEGREE_1>0</ANGLE_DEGREE_1> <ANGLE_DEGREE_2>15</ANGLE_DEGREE_2> <ANGLE_DEGREE_3>30</ANGLE_DEGREE_3> <ANGLE_DEGREE_4>35</ANGLE_DEGREE_4> <ANGLE_DEGREE_5>42</ANGLE_DEGREE_5> </Case> <Default> <TARGET_ANGLE_DEGREE>0</TARGET_ANGLE_DEGREE> <VALUE_RANGE>0.1</VALUE_RANGE> </Default> </Switch> </Parameters> <Parameters Type="Override"> <Switch Param="TYPE"> <Case Value="ALWAYS_ONE_LIT"> <TARGET_ANGLE Process="Float"> #ANGLE_DEGREE_5# #ANGLE_DEGREE_4# #ANGLE_DEGREE_3# #ANGLE_DEGREE_2# #ANGLE_DEGREE_1# #FLAPS_INDEX_COUNT# #ADJUSTED_ID_FLAP# case </TARGET_ANGLE> </Case> </Switch> </Parameters> <Parameters Type="Default"> <Switch Param="TYPE"> <Case Value="ALWAYS_ONE_LIT"> <TARGET_ANGLE_LIMIT_MIN Process="Float"> #ADJUSTED_ID_FLAP# 1 - 0 max sp0 #ANGLE_DEGREE_5# #ANGLE_DEGREE_4# #ANGLE_DEGREE_3# #ANGLE_DEGREE_2# #ANGLE_DEGREE_1# #FLAPS_INDEX_COUNT# l0 case sp1 #TARGET_ANGLE# l1 - 2 / l1 + </TARGET_ANGLE_LIMIT_MIN> <TARGET_ANGLE_LIMIT_MAX Process="Float"> #ADJUSTED_ID_FLAP# 1 + #MAX_FLAPS_INDEX# min sp0 #ANGLE_DEGREE_5# #ANGLE_DEGREE_4# #ANGLE_DEGREE_3# #ANGLE_DEGREE_2# #ANGLE_DEGREE_1# #FLAPS_INDEX_COUNT# l0 case sp1 l1 #TARGET_ANGLE# - 2 / #TARGET_ANGLE# + </TARGET_ANGLE_LIMIT_MAX> </Case> </Switch> </Parameters> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <UseTemplate Name="ASOBO_GT_Emissive_Gauge"> <Switch Param="TYPE"> <Case Value="ALWAYS_ONE_LIT"> <EMISSIVE_CODE>#TARGET_ANGLE_LIMIT_MIN# #TARGET_ANGLE_LIMIT_MAX# (A:TRAILING EDGE FLAPS LEFT ANGLE, degrees) rng</EMISSIVE_CODE> </Case> <Default> <EMISSIVE_CODE>(A:TRAILING EDGE FLAPS LEFT ANGLE, degrees) #TARGET_ANGLE_DEGREE# - abs #VALUE_RANGE# <</EMISSIVE_CODE> </Default> </Switch> </UseTemplate> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID (using ID)
Condition: Switch(TYPE)
-
Case: ALWAYS_ONE_LIT
Parameters set:
- ADJUSTED_ID_FLAP (using ID, MAX_FLAPS_INDEX)
- FLAPS_INDEX_COUNT (using MAX_FLAPS_INDEX)
- ANGLE_DEGREE_1
- ANGLE_DEGREE_2
- ANGLE_DEGREE_3
- ANGLE_DEGREE_4
- ANGLE_DEGREE_5
-
Default case:
Parameters set:
- TARGET_ANGLE_DEGREE
- VALUE_RANGE
-
Override
Condition: Switch(TYPE)
-
Case: ALWAYS_ONE_LIT
Parameters set:
- TARGET_ANGLE (using ANGLE_DEGREE_5, ANGLE_DEGREE_4, ANGLE_DEGREE_3, ANGLE_DEGREE_2, ANGLE_DEGREE_1, FLAPS_INDEX_COUNT, ADJUSTED_ID_FLAP)
-
-
Default
Condition: Switch(TYPE)
-
Case: ALWAYS_ONE_LIT
Parameters set:
- TARGET_ANGLE_LIMIT_MIN (using ADJUSTED_ID_FLAP, ANGLE_DEGREE_5, ANGLE_DEGREE_4, ANGLE_DEGREE_3, ANGLE_DEGREE_2, ANGLE_DEGREE_1, FLAPS_INDEX_COUNT, TARGET_ANGLE)
- TARGET_ANGLE_LIMIT_MAX (using ADJUSTED_ID_FLAP, MAX_FLAPS_INDEX, ANGLE_DEGREE_5, ANGLE_DEGREE_4, ANGLE_DEGREE_3, ANGLE_DEGREE_2, ANGLE_DEGREE_1, FLAPS_INDEX_COUNT, TARGET_ANGLE)
-
Parameters read:
- NODE_ID
Components:
-
#NODE_ID# (Node: #NODE_ID#)
Templates used:
-
ASOBO_GT_Emissive_Gauge
Condition: Switch(TYPE)
-
Case: ALWAYS_ONE_LIT
Parameters set:
- EMISSIVE_CODE (using TARGET_ANGLE_LIMIT_MIN, TARGET_ANGLE_LIMIT_MAX)
-
Default case:
Parameters set:
- EMISSIVE_CODE (using TARGET_ANGLE_DEGREE, VALUE_RANGE)
-
-
ASOBO_GT_Emissive_Gauge
-
Default
-
ASOBO_HANDLING_Light_Trim_Subtemplate
Definition from XML<Template Name="ASOBO_HANDLING_Light_Trim_Subtemplate"> <Parameters Type="Default"> <NODE_ID>HANDLING_Light_Trim</NODE_ID> <Switch Param="TRIM_TYPE"> <Case Value="AILERON"> <TRIM_SIMVAR>AILERON TRIM</TRIM_SIMVAR> </Case> <Case Value="ELEVATOR"> <TRIM_SIMVAR>ELEVATOR TRIM POSITION</TRIM_SIMVAR> </Case> <Case Value="RUDDER"> <TRIM_SIMVAR>RUDDER TRIM</TRIM_SIMVAR> </Case> <Default> <TRIM_SIMVAR>ELEVATOR TRIM POSITION</TRIM_SIMVAR> </Default> </Switch> <RANGE_DELTA>0.3</RANGE_DELTA> </Parameters> <Parameters Type="Default"> <Switch Param="TRIM_TYPE"> <Case Value="ELEVATOR"> <TARGET_VALUE>(A:ELEVATOR TRIM NEUTRAL, degree)</TARGET_VALUE> </Case> <Default> <TARGET_VALUE>0</TARGET_VALUE> </Default> </Switch> </Parameters> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <UseTemplate Name="ASOBO_GT_Emissive_Gauge"> <EMISSIVE_CODE>(A:#TRIM_SIMVAR#, degree) #TARGET_VALUE# - abs #RANGE_DELTA# <</EMISSIVE_CODE> </UseTemplate> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID
- RANGE_DELTA
Condition: Switch(TRIM_TYPE)
-
Case: AILERON
Parameters set:
- TRIM_SIMVAR
-
Case: ELEVATOR
Parameters set:
- TRIM_SIMVAR
-
Case: RUDDER
Parameters set:
- TRIM_SIMVAR
-
Default case:
Parameters set:
- TRIM_SIMVAR
-
Default
Condition: Switch(TRIM_TYPE)
-
Case: ELEVATOR
Parameters set:
- TARGET_VALUE
-
Default case:
Parameters set:
- TARGET_VALUE
-
Parameters read:
- NODE_ID
Components:
-
#NODE_ID# (Node: #NODE_ID#)
Templates used:
-
ASOBO_GT_Emissive_Gauge
Parameters set:
- EMISSIVE_CODE (using TRIM_SIMVAR, TARGET_VALUE, RANGE_DELTA)
-
ASOBO_GT_Emissive_Gauge
-
Default
-
ASOBO_HANDLING_AileronTrim_Template
Definition from XML<Template Name="ASOBO_HANDLING_AileronTrim_Template"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <Parameters Type="Default"> <Condition Check="SECONDARY"> <True> <IE_AILERONS_TRIM>#ID#_Secondary</IE_AILERONS_TRIM> </True> <False> <IE_AILERONS_TRIM>#ID#</IE_AILERONS_TRIM> </False> </Condition> </Parameters> <Parameters Type="Default"> <Switch Param="INTERACTION_TYPE"> <Case Value="KNOB"> <NODE_ID>HANDLING_Knob_AileronTrim</NODE_ID> <ANIM_NAME>HANDLING_Knob_AileronTrim</ANIM_NAME> <PART_ID>HANDLING_Knob_AileronTrim</PART_ID> <WWISE_EVENT_1>aileron_trim_knob_01</WWISE_EVENT_1> <WWISE_EVENT_2>aileron_trim_knob_02</WWISE_EVENT_2> <INCREMENT>15</INCREMENT> </Case> <Case Value="SWITCH"> <NODE_ID>HANDLING_Switch_AileronTrim</NODE_ID> <ANIM_NAME>HANDLING_Switch_AileronTrim</ANIM_NAME> <PART_ID>HANDLING_Switch_AileronTrim_LR</PART_ID> <OTHER_PART_ID>HANDLING_Switch_AileronTrim</OTHER_PART_ID> <WWISE_EVENT>aileron_trim_switch</WWISE_EVENT> <ID>1</ID> <INCREMENT>5</INCREMENT> <SWITCH_DIRECTION>Horizontal</SWITCH_DIRECTION> </Case> </Switch> <DRAG_INCREMENT>1</DRAG_INCREMENT> <Condition Check="NEEDLE_NODE_ID"> <NEEDLE_ANIM_NAME>HANDLING_Knob_AileronTrim_Needle</NEEDLE_ANIM_NAME> </Condition> <ANIM_SIMVAR_MIN>-100</ANIM_SIMVAR_MIN> <ANIM_SIMVAR_MAX>100</ANIM_SIMVAR_MAX> <ANIM_SIMVAR_SCALE>-0.5</ANIM_SIMVAR_SCALE> <TOOLTIPID>TT:COCKPIT.TOOLTIPS.AILERON_TRIM</TOOLTIPID> <THRESHOLD_INPUT>0.00025</THRESHOLD_INPUT> <THRESHOLD_MOUSE>0.005</THRESHOLD_MOUSE> </Parameters> <Parameters Type="Default"> <TOOLTIP_AILERONS_TRIM_TITLE>@TT_Package.HANDLING_KNOB_AILERON_TITLE</TOOLTIP_AILERONS_TRIM_TITLE> </Parameters> <Parameters Type="Override"> <TOOLTIP_TITLE>#TOOLTIP_AILERONS_TRIM_TITLE#</TOOLTIP_TITLE> <TOOLTIP_ENTRY_0>HANDLING_AileronsTrim_#IE_AILERONS_TRIM#</TOOLTIP_ENTRY_0> </Parameters> <Switch Param="INTERACTION_TYPE"> <Case Value="SWITCH"> <UseTemplate Name="ASOBO_HANDLING_Trim_Variable_Speed_Base_Template"> <TRIM_NAME>AileronsTrim</TRIM_NAME> <TRIM_TYPE>Ailerons</TRIM_TYPE> <SWITCH_POSITION_TYPE>L</SWITCH_POSITION_TYPE> <SWITCH_POSITION_VAR>XMLVAR_AileronTrim_Switch_#IE_AILERONS_TRIM#</SWITCH_POSITION_VAR> <SWITCH_POSITION_TYPE_TIMER>L</SWITCH_POSITION_TYPE_TIMER> <SWITCH_POSITION_VAR_TIMER>XMLVAR_AileronTrim_#IE_AILERONS_TRIM#_SwitchStateTimer</SWITCH_POSITION_VAR_TIMER> </UseTemplate> </Case> <Case Value="KNOB"> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <UseInputEvent ID="HANDLING"> <AILERONS_TRIM_ID>1</AILERONS_TRIM_ID> </UseInputEvent> <UseTemplate Name="ASOBO_GT_Knob_Finite_Code"> <CURSOR>Hand</CURSOR> <CLOCKWISE_CODE> #INCREMENT# (>B:HANDLING_AileronsTrim_#IE_AILERONS_TRIM#_Inc) </CLOCKWISE_CODE> <ANTICLOCKWISE_CODE> #INCREMENT# (>B:HANDLING_AileronsTrim_#IE_AILERONS_TRIM#_Dec) </ANTICLOCKWISE_CODE> <ANIM_CODE>(A:AILERON TRIM PCT, percent) 0.5 * 50 +</ANIM_CODE> <Condition Check="INVERT_KNOB_ANIM"> <INVERT_ANIM>#INVERT_KNOB_ANIM#</INVERT_ANIM> </Condition> <Condition Valid="KNOB_HIGHLIGHT_NODE_ID"> <HIGHLIGHT_NODE_ID>#KNOB_HIGHLIGHT_NODE_ID#</HIGHLIGHT_NODE_ID> </Condition> </UseTemplate> </Component> <Condition Check="NEEDLE_NODE_ID"> <Component ID="#NEEDLE_NODE_ID#" Node="#NEEDLE_NODE_ID#"> <UseTemplate Name="ASOBO_GT_Anim_Sim"> <ANIM_NAME>#NEEDLE_ANIM_NAME#</ANIM_NAME> <ANIM_SIMVAR>AILERON TRIM PCT</ANIM_SIMVAR> <ANIM_SIMVAR_UNITS>percent</ANIM_SIMVAR_UNITS> <ANIM_SIMVAR_SCALE>-0.5</ANIM_SIMVAR_SCALE> <ANIM_SIMVAR_BIAS>50</ANIM_SIMVAR_BIAS> <Condition Check="INVERT_NEEDLE_ANIM"> <INVERT_ANIM>#INVERT_NEEDLE_ANIM#</INVERT_ANIM> </Condition> </UseTemplate> </Component> </Condition> </Case> </Switch> </Template>Parameters initialization:
-
Default
Parameters set:
- ID
-
Default
Condition: Check(SECONDARY)
-
Case: True
Parameters set:
- IE_AILERONS_TRIM (using ID)
-
Case: False
Parameters set:
- IE_AILERONS_TRIM (using ID)
-
-
Default
Parameters set:
- DRAG_INCREMENT
- ANIM_SIMVAR_MIN
- ANIM_SIMVAR_MAX
- ANIM_SIMVAR_SCALE
- TOOLTIPID
- THRESHOLD_INPUT
- THRESHOLD_MOUSE
Condition: Switch(INTERACTION_TYPE)
-
Case: KNOB
Parameters set:
- NODE_ID
- ANIM_NAME
- PART_ID
- WWISE_EVENT_1
- WWISE_EVENT_2
- INCREMENT
-
Case: SWITCH
Parameters set:
- NODE_ID
- ANIM_NAME
- PART_ID
- OTHER_PART_ID
- WWISE_EVENT
- ID
- INCREMENT
- SWITCH_DIRECTION
Condition: Check(NEEDLE_NODE_ID)
-
Case: True
Parameters set:
- NEEDLE_ANIM_NAME
-
Default
Parameters set:
- TOOLTIP_AILERONS_TRIM_TITLE
-
Override
Parameters set:
- TOOLTIP_TITLE (using TOOLTIP_AILERONS_TRIM_TITLE)
- TOOLTIP_ENTRY_0 (using IE_AILERONS_TRIM)
Condition: Switch(INTERACTION_TYPE)
-
Case: SWITCH
Templates used:
-
ASOBO_HANDLING_Trim_Variable_Speed_Base_Template
Parameters set:
- TRIM_NAME
- TRIM_TYPE
- SWITCH_POSITION_TYPE
- SWITCH_POSITION_VAR (using IE_AILERONS_TRIM)
- SWITCH_POSITION_TYPE_TIMER
- SWITCH_POSITION_VAR_TIMER (using IE_AILERONS_TRIM)
-
ASOBO_HANDLING_Trim_Variable_Speed_Base_Template
-
Case: KNOB
Parameters read:
- NODE_ID
Components:
-
#NODE_ID# (Node: #NODE_ID#)
Parameters set:
- AILERONS_TRIM_ID
Templates used:
-
ASOBO_GT_Knob_Finite_Code
- May include a subtemplate using the parameter 'EXTRA_INTERACTION' and resolve to the following template(s):
Parameters set:
- CURSOR
- CLOCKWISE_CODE (using INCREMENT, IE_AILERONS_TRIM)
- ANTICLOCKWISE_CODE (using INCREMENT, IE_AILERONS_TRIM)
- ANIM_CODE
Condition: Check(INVERT_KNOB_ANIM)
-
Case: True
Parameters set:
- INVERT_ANIM (using INVERT_KNOB_ANIM)
Condition: Valid(KNOB_HIGHLIGHT_NODE_ID)
-
Case: True
Parameters set:
- HIGHLIGHT_NODE_ID (using KNOB_HIGHLIGHT_NODE_ID)
Condition: Check(NEEDLE_NODE_ID)
-
Case: True
Parameters read:
- NEEDLE_NODE_ID
Components:
-
#NEEDLE_NODE_ID# (Node: #NEEDLE_NODE_ID#)
Templates used:
-
ASOBO_GT_Anim_Sim
Parameters set:
- ANIM_NAME (using NEEDLE_ANIM_NAME)
- ANIM_SIMVAR
- ANIM_SIMVAR_UNITS
- ANIM_SIMVAR_SCALE
- ANIM_SIMVAR_BIAS
Condition: Check(INVERT_NEEDLE_ANIM)
-
Case: True
Parameters set:
- INVERT_ANIM (using INVERT_NEEDLE_ANIM)
-
ASOBO_GT_Anim_Sim
-
Default
-
ASOBO_HANDLING_RudderTrim_Template
Definition from XML<Template Name="ASOBO_HANDLING_RudderTrim_Template"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <Parameters Type="Default"> <Condition Check="SECONDARY"> <True> <IE_RUDDER_TRIM>#ID#_Secondary</IE_RUDDER_TRIM> </True> <False> <IE_RUDDER_TRIM>#ID#</IE_RUDDER_TRIM> </False> </Condition> </Parameters> <Parameters Type="Default"> <MOUSE_WHEEL_INCREMENT>20</MOUSE_WHEEL_INCREMENT> <NODE_ID>HANDLING_Knob_RudderTrim</NODE_ID> <ANIM_NAME>HANDLING_Knob_RudderTrim</ANIM_NAME> <RESET_PUSH_NODE_ID>HANDLING_Push_RudderTrim_Reset</RESET_PUSH_NODE_ID> <RESET_PUSH_ANIM_NAME>HANDLING_Push_RudderTrim_Reset</RESET_PUSH_ANIM_NAME> <PART_ID>HANDLING_Knob_RudderTrim</PART_ID> <Condition Check="NEEDLE_NODE_ID"> <NEEDLE_ANIM_NAME>HANDLING_Knob_RudderTrim_Needle</NEEDLE_ANIM_NAME> </Condition> <WWISE_EVENT>rudder_trim_knob</WWISE_EVENT> <WWISE_EVENT_1>rudder_trim_knob_01</WWISE_EVENT_1> <WWISE_EVENT_2>rudder_trim_knob_02</WWISE_EVENT_2> <Switch Param="INTERACTION_TYPE"> <Case Value="SWITCH"> <INCREMENT>25</INCREMENT> <Condition Valid="NOT_DISABLED_BY_AP"> <False> <ADDITIONAL_TESTS>(A:AUTOPILOT MASTER, Bool) ! and</ADDITIONAL_TESTS> </False> </Condition> </Case> <Case Value="WHEEL"> <CURSOR>Grab</CURSOR> <INCREMENT>25</INCREMENT> <UPPER_LIMIT>16384</UPPER_LIMIT> <LOWER_LIMIT>-16384</LOWER_LIMIT> </Case> <Case Value="KNOB"> <INCREMENT>10</INCREMENT> <UPPER_LIMIT>16384</UPPER_LIMIT> <LOWER_LIMIT>-16384</LOWER_LIMIT> </Case> </Switch> <TOOLTIP_RUDDER_TRIM_TITLE>@TT_Package.HANDLING_KNOB_RUDDER_TRIM_TITLE</TOOLTIP_RUDDER_TRIM_TITLE> </Parameters> <Parameters Type="Override"> <TOOLTIP_TITLE>#TOOLTIP_RUDDER_TRIM_TITLE#</TOOLTIP_TITLE> <TOOLTIP_ENTRY_0>HANDLING_RudderTrim_#IE_RUDDER_TRIM#</TOOLTIP_ENTRY_0> </Parameters> <Switch Param="INTERACTION_TYPE"> <Case Value="SWITCH"> <UseTemplate Name="ASOBO_HANDLING_Trim_Variable_Speed_Base_Template"> <ARROW_TYPE>Curved</ARROW_TYPE> <TRIM_NAME>RudderTrim</TRIM_NAME> <TRIM_TYPE>Rudder</TRIM_TYPE> <SWITCH_POSITION_TYPE>L</SWITCH_POSITION_TYPE> <SWITCH_POSITION_VAR>XMLVAR_RudderTrim_Switch_#IE_RUDDER_TRIM#</SWITCH_POSITION_VAR> <SWITCH_POSITION_TYPE_TIMER>L</SWITCH_POSITION_TYPE_TIMER> <SWITCH_POSITION_VAR_TIMER>XMLVAR_RudderTrim_#IE_RUDDER_TRIM#_SwitchStateTimer</SWITCH_POSITION_VAR_TIMER> </UseTemplate> <Condition Check="NO_RESET_PUSH"> <False> <UseTemplate Name="ASOBO_HANDLING_Base_Template"> <INTERACTION_TYPE>Push</INTERACTION_TYPE> <TT_ICON>Push</TT_ICON> <IE_NAME>RudderTrim_Reset</IE_NAME> <SET_CODE>0 (>K:RUDDER_TRIM_SET) 1 (>O:_ButtonAnimVar)</SET_CODE> <WWISE_EVENT_1>rudder_trim_rest_push_button_on</WWISE_EVENT_1> <WWISE_EVENT_2>rudder_trim_rest_push_button_on</WWISE_EVENT_2> <TT_DESCRIPTION_ID>@TT_Package.HANDLING_PUSH_RUDDERRESET_ACTION</TT_DESCRIPTION_ID> <TOOLTIP_TITLE>@TT_Package.HANDLING_PUSH_RUDDERRESET_TITLE</TOOLTIP_TITLE> <TOOLTIP_ENTRY_0>HANDLING_RudderTrim_Reset</TOOLTIP_ENTRY_0> <NODE_ID>#RESET_PUSH_NODE_ID#</NODE_ID> <ANIM_NAME>#RESET_PUSH_ANIM_NAME#</ANIM_NAME> <BINDING_INC_0_EVENT_ID>RUDDER_TRIM_RESET</BINDING_INC_0_EVENT_ID> </UseTemplate> </False> </Condition> </Case> <Case Value="WHEEL"> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <UseInputEvent ID="HANDLING"> <RUDDER_TRIM_ID>1</RUDDER_TRIM_ID> </UseInputEvent> <Condition Check="INFINITE"> <True> <UseTemplate Name="ASOBO_GT_Lever_DraggingYAxis_Code"> <UP_CODE>(>B:HANDLING_RudderTrim_#IE_RUDDER_TRIM#_Inc)</UP_CODE> <DOWN_CODE>(>B:HANDLING_RudderTrim_#IE_RUDDER_TRIM#_Dec)</DOWN_CODE> <IS_LOOPING/> </UseTemplate> </True> <False> <UseTemplate Name="ASOBO_GT_Lever_DraggingWheelLeftDrag_Axis"> <NO_ARROWS>True</NO_ARROWS> <CURSOR>Grab</CURSOR> <ANIM_LENGTH>100</ANIM_LENGTH> <ANIM_CODE>(B:HANDLING_RudderTrim_#IE_RUDDER_TRIM#)</ANIM_CODE> <Condition Valid="USE_TRAJECTORY_DRAG_MODE"> <True> <DRAG_CODE> (M:DragPercent) 2 * 1 - 16384 * #UPPER_LIMIT# min #LOWER_LIMIT# max (>B:HANDLING_RudderTrim_#IE_RUDDER_TRIM#_Set) </DRAG_CODE> </True> <False> <DRAG_CODE> (A:RUDDER TRIM PCT, position 16k) #INCREMENT# (O:DragScale) * -1 * + #UPPER_LIMIT# min #LOWER_LIMIT# max (>B:HANDLING_RudderTrim_#IE_RUDDER_TRIM#_Set) </DRAG_CODE> </False> </Condition> <POSITIVE_AXIS_CODE>#MOUSE_WHEEL_INCREMENT# (>B:HANDLING_RudderTrim_#IE_RUDDER_TRIM#_Dec)</POSITIVE_AXIS_CODE> <NEGATIVE_AXIS_CODE>#MOUSE_WHEEL_INCREMENT# (>B:HANDLING_RudderTrim_#IE_RUDDER_TRIM#_Inc)</NEGATIVE_AXIS_CODE> </UseTemplate> </False> </Condition> </Component> </Case> <Case Value="KNOB"> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <UseInputEvent ID="HANDLING"> <RUDDER_TRIM_ID>1</RUDDER_TRIM_ID> </UseInputEvent> <Parameters Type="Override"> <Condition Valid="INVERT_EFFECT"> <False> <INC>Inc</INC> <DEC>Dec</DEC> </False> <True> <INC>Dec</INC> <DEC>Inc</DEC> </True> </Condition> </Parameters> <UseTemplate Name="ASOBO_GT_Knob_Finite_Code"> <CURSOR>Hand</CURSOR> <CLOCKWISE_CODE> #INCREMENT# (>B:HANDLING_RudderTrim_#IE_RUDDER_TRIM#_#INC#) </CLOCKWISE_CODE> <ANTICLOCKWISE_CODE> #INCREMENT# (>B:HANDLING_RudderTrim_#IE_RUDDER_TRIM#_#DEC#) </ANTICLOCKWISE_CODE> <ANIM_CODE>(B:HANDLING_RudderTrim_#IE_RUDDER_TRIM#)</ANIM_CODE> <Condition Valid="INVERT_KNOB_ANIM"> <INVERT_ANIM>#INVERT_KNOB_ANIM#</INVERT_ANIM> </Condition> <Condition Valid="KNOB_HIGHLIGHT_NODE_ID"> <HIGHLIGHT_NODE_ID>#KNOB_HIGHLIGHT_NODE_ID#</HIGHLIGHT_NODE_ID> </Condition> </UseTemplate> </Component> </Case> </Switch> <Condition Check="NEEDLE_NODE_ID"> <Component ID="#NEEDLE_NODE_ID#" Node="#NEEDLE_NODE_ID#"> <UseTemplate Name="ASOBO_GT_Anim_Sim"> <ANIM_NAME>#NEEDLE_ANIM_NAME#</ANIM_NAME> <ANIM_SIMVAR>RUDDER TRIM PCT</ANIM_SIMVAR> <ANIM_SIMVAR_UNITS>percent</ANIM_SIMVAR_UNITS> <ANIM_SIMVAR_SCALE>0.5</ANIM_SIMVAR_SCALE> <ANIM_SIMVAR_BIAS>50</ANIM_SIMVAR_BIAS> </UseTemplate> </Component> </Condition> </Template>Parameters initialization:
-
Default
Parameters set:
- ID
-
Default
Condition: Check(SECONDARY)
-
Case: True
Parameters set:
- IE_RUDDER_TRIM (using ID)
-
Case: False
Parameters set:
- IE_RUDDER_TRIM (using ID)
-
-
Default
Parameters set:
- MOUSE_WHEEL_INCREMENT
- NODE_ID
- ANIM_NAME
- RESET_PUSH_NODE_ID
- RESET_PUSH_ANIM_NAME
- PART_ID
- WWISE_EVENT
- WWISE_EVENT_1
- WWISE_EVENT_2
- TOOLTIP_RUDDER_TRIM_TITLE
Condition: Check(NEEDLE_NODE_ID)
-
Case: True
Parameters set:
- NEEDLE_ANIM_NAME
Condition: Switch(INTERACTION_TYPE)
-
Case: SWITCH
Parameters set:
- INCREMENT
Condition: Valid(NOT_DISABLED_BY_AP)
-
Case: False
Parameters set:
- ADDITIONAL_TESTS
-
Case: WHEEL
Parameters set:
- CURSOR
- INCREMENT
- UPPER_LIMIT
- LOWER_LIMIT
-
Case: KNOB
Parameters set:
- INCREMENT
- UPPER_LIMIT
- LOWER_LIMIT
-
Override
Parameters set:
- TOOLTIP_TITLE (using TOOLTIP_RUDDER_TRIM_TITLE)
- TOOLTIP_ENTRY_0 (using IE_RUDDER_TRIM)
Condition: Switch(INTERACTION_TYPE)
-
Case: SWITCH
Templates used:
-
ASOBO_HANDLING_Trim_Variable_Speed_Base_Template
Parameters set:
- ARROW_TYPE
- TRIM_NAME
- TRIM_TYPE
- SWITCH_POSITION_TYPE
- SWITCH_POSITION_VAR (using IE_RUDDER_TRIM)
- SWITCH_POSITION_TYPE_TIMER
- SWITCH_POSITION_VAR_TIMER (using IE_RUDDER_TRIM)
Condition: Check(NO_RESET_PUSH)
-
Case: False
Templates used:
-
ASOBO_HANDLING_Base_Template
Parameters set:
- INTERACTION_TYPE
- TT_ICON
- IE_NAME
- SET_CODE
- WWISE_EVENT_1
- WWISE_EVENT_2
- TT_DESCRIPTION_ID
- TOOLTIP_TITLE
- TOOLTIP_ENTRY_0
- NODE_ID (using RESET_PUSH_NODE_ID)
- ANIM_NAME (using RESET_PUSH_ANIM_NAME)
- BINDING_INC_0_EVENT_ID
-
ASOBO_HANDLING_Base_Template
-
ASOBO_HANDLING_Trim_Variable_Speed_Base_Template
-
Case: WHEEL
Parameters read:
- NODE_ID
Components:
-
#NODE_ID# (Node: #NODE_ID#)
Parameters set:
- RUDDER_TRIM_ID
Condition: Check(INFINITE)
-
Case: True
Templates used:
-
ASOBO_GT_Lever_DraggingYAxis_Code
Parameters set:
- UP_CODE (using IE_RUDDER_TRIM)
- DOWN_CODE (using IE_RUDDER_TRIM)
- IS_LOOPING
-
ASOBO_GT_Lever_DraggingYAxis_Code
-
Case: False
Templates used:
-
ASOBO_GT_Lever_DraggingWheelLeftDrag_Axis
Parameters set:
- NO_ARROWS
- CURSOR
- ANIM_LENGTH
- ANIM_CODE (using IE_RUDDER_TRIM)
- POSITIVE_AXIS_CODE (using MOUSE_WHEEL_INCREMENT, IE_RUDDER_TRIM)
- NEGATIVE_AXIS_CODE (using MOUSE_WHEEL_INCREMENT, IE_RUDDER_TRIM)
Condition: Valid(USE_TRAJECTORY_DRAG_MODE)
-
Case: True
Parameters set:
- DRAG_CODE (using UPPER_LIMIT, LOWER_LIMIT, IE_RUDDER_TRIM)
-
Case: False
Parameters set:
- DRAG_CODE (using INCREMENT, UPPER_LIMIT, LOWER_LIMIT, IE_RUDDER_TRIM)
-
ASOBO_GT_Lever_DraggingWheelLeftDrag_Axis
-
Case: KNOB
Parameters read:
- NODE_ID
Components:
-
#NODE_ID# (Node: #NODE_ID#)
Parameters set:
- RUDDER_TRIM_ID
Templates used:
-
ASOBO_GT_Knob_Finite_Code
- May include a subtemplate using the parameter 'EXTRA_INTERACTION' and resolve to the following template(s):
Parameters set:
- CURSOR
- CLOCKWISE_CODE (using INCREMENT, IE_RUDDER_TRIM, INC)
- ANTICLOCKWISE_CODE (using INCREMENT, IE_RUDDER_TRIM, DEC)
- ANIM_CODE (using IE_RUDDER_TRIM)
Condition: Valid(INVERT_KNOB_ANIM)
-
Case: True
Parameters set:
- INVERT_ANIM (using INVERT_KNOB_ANIM)
Condition: Valid(KNOB_HIGHLIGHT_NODE_ID)
-
Case: True
Parameters set:
- HIGHLIGHT_NODE_ID (using KNOB_HIGHLIGHT_NODE_ID)
Condition: Valid(INVERT_EFFECT)
-
Case: False
Parameters set:
- INC
- DEC
-
Case: True
Parameters set:
- INC
- DEC
Condition: Check(NEEDLE_NODE_ID)
-
Case: True
Parameters read:
- NEEDLE_NODE_ID
Components:
-
#NEEDLE_NODE_ID# (Node: #NEEDLE_NODE_ID#)
Templates used:
-
ASOBO_GT_Anim_Sim
Parameters set:
- ANIM_NAME (using NEEDLE_ANIM_NAME)
- ANIM_SIMVAR
- ANIM_SIMVAR_UNITS
- ANIM_SIMVAR_SCALE
- ANIM_SIMVAR_BIAS
-
ASOBO_GT_Anim_Sim
-
Default
-
ASOBO_HANDLING_ElevatorTrim_Template
Definition from XML<Template Name="ASOBO_HANDLING_ElevatorTrim_Template"> <Parameters Type="Default"> <ID>1</ID> </Parameters> <Parameters Type="Default"> <Condition Check="SECONDARY"> <True> <IE_ELEVATOR_TRIM>#ID#_Secondary</IE_ELEVATOR_TRIM> </True> <False> <IE_ELEVATOR_TRIM>#ID#</IE_ELEVATOR_TRIM> </False> </Condition> </Parameters> <Parameters Type="Default"> <Switch Param="INTERACTION_TYPE"> <Case Value="WHEEL"> <ANIM_NAME>HANDLING_Wheel_ElevatorTrim</ANIM_NAME> <NODE_ID>HANDLING_Wheel_ElevatorTrim</NODE_ID> <PART_ID>HANDLING_Wheel_ElevatorTrim</PART_ID> <Condition Check="INFINITE"> <True> <DRAG_SPEED>8</DRAG_SPEED> </True> </Condition> <INCREMENT>30</INCREMENT> <MOUSE_WHEEL_INCREMENT>16</MOUSE_WHEEL_INCREMENT> <UPPER_LIMIT>16384</UPPER_LIMIT> <LOWER_LIMIT>-16384</LOWER_LIMIT> <AXIS>Y</AXIS> <Condition Check="DOUBLE_WHEEL"> <NODE_ID2>HANDLING_Wheel_ElevatorTrim_Pitch_2</NODE_ID2> </Condition> <DRAG_AXIS_SCALE>100</DRAG_AXIS_SCALE> <WWISE_EVENT_1>elevator_trim_lock_on</WWISE_EVENT_1> <WWISE_EVENT_2>elevator_trim_lock_off</WWISE_EVENT_2> <DRAG_SCALAR>0.001</DRAG_SCALAR> <INPUTEVENT_VAR_TYPE>L</INPUTEVENT_VAR_TYPE> <INPUTEVENT_VAR_NAME>HANDLING_ElevatorTrim</INPUTEVENT_VAR_NAME> </Case> <Case Value="SWITCH"> <NODE_ID>HANDLING_Switch_ElevatorTrim_#ID#</NODE_ID> <ANIM_NAME>HANDLING_Switch_ElevatorTrim_#ID#</ANIM_NAME> <PART_ID>HANDLING_Switch_Elevator_Trim</PART_ID> <OTHER_PART_ID>HANDLING_Switch_ElevatorTrim</OTHER_PART_ID> <WWISE_EVENT>elevator_switch</WWISE_EVENT> <COUNT>2</COUNT> <ANIMREF_ID>-1</ANIMREF_ID> <ANIMTIP_0_ON_CURSOR>UpArrow</ANIMTIP_0_ON_CURSOR> <ANIMTIP_1_ON_CURSOR>DownArrow</ANIMTIP_1_ON_CURSOR> <ANIMTIP_0>TT:COCKPIT.TOOLTIPS.MET_PITCH_TRIM_DN</ANIMTIP_0> <ANIMTIP_1>TT:COCKPIT.TOOLTIPS.MET_PITCH_TRIM_UP</ANIMTIP_1> <TRIM_LIMIT>20</TRIM_LIMIT> <SWITCH_POSITION_TYPE>L</SWITCH_POSITION_TYPE> <SWITCH_POSITION_VAR>XMLVAR_ElevatorTrim_Switch_#IE_ELEVATOR_TRIM#</SWITCH_POSITION_VAR> <SWITCH_POSITION_TYPE_TIMER>L</SWITCH_POSITION_TYPE_TIMER> <SWITCH_POSITION_VAR_TIMER>XMLVAR_ElevatorTrim_#IE_ELEVATOR_TRIM#_SwitchStateTimer</SWITCH_POSITION_VAR_TIMER> </Case> </Switch> </Parameters> <Parameters Type="Default"> <TOOLTIP_ELEVATOR_TRIM_TITLE>@TT_Package.HANDLING_SWITCH_YOKE_ELEVATORTRIM_TITLE</TOOLTIP_ELEVATOR_TRIM_TITLE> </Parameters> <Parameters Type="Override"> <TOOLTIP_TITLE>#TOOLTIP_ELEVATOR_TRIM_TITLE#</TOOLTIP_TITLE> <TOOLTIP_ENTRY_0>HANDLING_ElevatorTrim_#IE_ELEVATOR_TRIM#</TOOLTIP_ENTRY_0> <Switch Param="INTERACTION_TYPE"> <Case Value="WHEEL"> <Condition Check="INFINITE"> <True> <UP_CODE>(>B:HANDLING_ElevatorTrim_#IE_ELEVATOR_TRIM#_Inc)</UP_CODE> <DOWN_CODE>(>B:HANDLING_ElevatorTrim_#IE_ELEVATOR_TRIM#_Dec)</DOWN_CODE> </True> <False> <Condition Valid="USE_TRAJECTORY_DRAG_MODE"> <True> <DRAG_CODE> (M:DragPercent) 2 * 1 - 16384 * #UPPER_LIMIT# min #LOWER_LIMIT# max (>B:HANDLING_ElevatorTrim_#IE_ELEVATOR_TRIM#_Set) </DRAG_CODE> </True> <False> <Condition Valid="SLOW_DRAG"> <True> <DRAG_CODE> -1 1 (I:_comparePos) (O:_LastPos) < ? sp0 (#INPUTEVENT_VAR_TYPE#:#INPUTEVENT_VAR_NAME#) #INCREMENT# (O:DragScale) * l0 * + #UPPER_LIMIT# min #LOWER_LIMIT# max (>B:HANDLING_ElevatorTrim_#IE_ELEVATOR_TRIM#_Set) </DRAG_CODE> </True> <False> <DRAG_CODE> (#INPUTEVENT_VAR_TYPE#:#INPUTEVENT_VAR_NAME#) #INCREMENT# (O:DragScale) * -1 * + #UPPER_LIMIT# min #LOWER_LIMIT# max (>B:HANDLING_ElevatorTrim_#IE_ELEVATOR_TRIM#_Set) </DRAG_CODE> </False> </Condition> </False> </Condition> <POSITIVE_AXIS_CODE>#MOUSE_WHEEL_INCREMENT# (>B:HANDLING_ElevatorTrim_#IE_ELEVATOR_TRIM#_Dec)</POSITIVE_AXIS_CODE> <NEGATIVE_AXIS_CODE>#MOUSE_WHEEL_INCREMENT# (>B:HANDLING_ElevatorTrim_#IE_ELEVATOR_TRIM#_Inc)</NEGATIVE_AXIS_CODE> </False> </Condition> </Case> </Switch> </Parameters> <Switch Param="INTERACTION_TYPE"> <Case Value="WHEEL"> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <Condition Valid="SLOW_DRAG"> <True> <UseTemplate Name="ASOBO_GT_Update"> <UPDATE_ONCE>True</UPDATE_ONCE> <UPDATE_CODE>#DRAG_AXIS_SCALE# (>O:DragScale)</UPDATE_CODE> </UseTemplate> <UseTemplate Name="ASOBO_GT_Update"> <FREQUENCY>3</FREQUENCY> <UPDATE_CODE>(O:_LastPos) (>I:_comparePos)</UPDATE_CODE> </UseTemplate> </True> </Condition> <UseInputEvent ID="HANDLING"> <ELEVATOR_TRIM_ID>1</ELEVATOR_TRIM_ID> </UseInputEvent> <DefaultTemplateParameters> <Condition Valid="HIGHLIGHT_NODE_ID_1"> <HIGHLIGHT_NODE_ID>#HIGHLIGHT_NODE_ID_1#</HIGHLIGHT_NODE_ID> </Condition> </DefaultTemplateParameters> <Condition Check="INFINITE"> <True> <UseTemplate Name="ASOBO_GT_Lever_DraggingYAxis_Code"> <IS_LOOPING/> </UseTemplate> </True> <False> <UseTemplate Name="ASOBO_GT_Lever_DraggingWheelLeftDrag_Axis"> <NO_ARROWS>True</NO_ARROWS> <CURSOR>Grab</CURSOR> <ANIM_LENGTH>100</ANIM_LENGTH> <ANIM_CODE>(B:HANDLING_ElevatorTrim_#IE_ELEVATOR_TRIM#)</ANIM_CODE> </UseTemplate> </False> </Condition> </Component> <Condition Check="HIGHLIGHT_NODE_ID"> <UseTemplate Name="ASOBO_GT_ComponentWith_PART_ID"> <NODE_ID>#HIGHLIGHT_NODE_ID#</NODE_ID> </UseTemplate> </Condition> <Condition Check="DOUBLE_WHEEL"> <Component ID="#NODE_ID2#" Node="#NODE_ID2#"> <DefaultTemplateParameters> <Condition Valid="HIGHLIGHT_NODE_ID_2"> <HIGHLIGHT_NODE_ID>#HIGHLIGHT_NODE_ID_2#</HIGHLIGHT_NODE_ID> </Condition> </DefaultTemplateParameters> <Condition Check="INFINITE"> <True> <UseTemplate Name="ASOBO_GT_Interaction_DraggingYAxis_Code"> <HELPID>HELPID_GAUGE_PITCH_TRIM</HELPID> <IS_LOOPING/> </UseTemplate> </True> <False> <UseTemplate Name="ASOBO_GT_Interaction_WheelLeftDrag_Axis"> <NO_ARROWS>True</NO_ARROWS> <CURSOR>Grab</CURSOR> </UseTemplate> </False> </Condition> </Component> </Condition> </Case> <Case Value="SWITCH"> <UseTemplate Name="ASOBO_HANDLING_Trim_Variable_Speed_Base_Template"> <SWITCH_DIRECTION>Vertical</SWITCH_DIRECTION> <TRIM_NAME>ElevatorTrim</TRIM_NAME> <TRIM_TYPE>Elevator</TRIM_TYPE> </UseTemplate> </Case> </Switch> </Template>Parameters initialization:
-
Default
Parameters set:
- ID
-
Default
Condition: Check(SECONDARY)
-
Case: True
Parameters set:
- IE_ELEVATOR_TRIM (using ID)
-
Case: False
Parameters set:
- IE_ELEVATOR_TRIM (using ID)
-
-
Default
Condition: Switch(INTERACTION_TYPE)
-
Case: WHEEL
Parameters set:
- ANIM_NAME
- NODE_ID
- PART_ID
- INCREMENT
- MOUSE_WHEEL_INCREMENT
- UPPER_LIMIT
- LOWER_LIMIT
- AXIS
- DRAG_AXIS_SCALE
- WWISE_EVENT_1
- WWISE_EVENT_2
- DRAG_SCALAR
- INPUTEVENT_VAR_TYPE
- INPUTEVENT_VAR_NAME
Condition: Check(INFINITE)
-
Case: True
Parameters set:
- DRAG_SPEED
Condition: Check(DOUBLE_WHEEL)
-
Case: True
Parameters set:
- NODE_ID2
-
Case: SWITCH
Parameters set:
- NODE_ID (using ID)
- ANIM_NAME (using ID)
- PART_ID
- OTHER_PART_ID
- WWISE_EVENT
- COUNT
- ANIMREF_ID
- ANIMTIP_0_ON_CURSOR
- ANIMTIP_1_ON_CURSOR
- ANIMTIP_0
- ANIMTIP_1
- TRIM_LIMIT
- SWITCH_POSITION_TYPE
- SWITCH_POSITION_VAR (using IE_ELEVATOR_TRIM)
- SWITCH_POSITION_TYPE_TIMER
- SWITCH_POSITION_VAR_TIMER (using IE_ELEVATOR_TRIM)
-
-
Default
Parameters set:
- TOOLTIP_ELEVATOR_TRIM_TITLE
-
Override
Parameters set:
- TOOLTIP_TITLE (using TOOLTIP_ELEVATOR_TRIM_TITLE)
- TOOLTIP_ENTRY_0 (using IE_ELEVATOR_TRIM)
Condition: Switch(INTERACTION_TYPE)
-
Case: WHEEL
Condition: Check(INFINITE)
-
Case: True
Parameters set:
- UP_CODE (using IE_ELEVATOR_TRIM)
- DOWN_CODE (using IE_ELEVATOR_TRIM)
-
Case: False
Parameters set:
- POSITIVE_AXIS_CODE (using MOUSE_WHEEL_INCREMENT, IE_ELEVATOR_TRIM)
- NEGATIVE_AXIS_CODE (using MOUSE_WHEEL_INCREMENT, IE_ELEVATOR_TRIM)
Condition: Valid(USE_TRAJECTORY_DRAG_MODE)
-
Case: True
Parameters set:
- DRAG_CODE (using UPPER_LIMIT, LOWER_LIMIT, IE_ELEVATOR_TRIM)
-
Case: False
Condition: Valid(SLOW_DRAG)
-
Case: True
Parameters set:
- DRAG_CODE (using INPUTEVENT_VAR_TYPE, INPUTEVENT_VAR_NAME, INCREMENT, UPPER_LIMIT, LOWER_LIMIT, IE_ELEVATOR_TRIM)
-
Case: False
Parameters set:
- DRAG_CODE (using INPUTEVENT_VAR_TYPE, INPUTEVENT_VAR_NAME, INCREMENT, UPPER_LIMIT, LOWER_LIMIT, IE_ELEVATOR_TRIM)
-
-
Condition: Switch(INTERACTION_TYPE)
-
Case: WHEEL
Parameters read:
- NODE_ID
Components:
-
#NODE_ID# (Node: #NODE_ID#)
Parameters set:
- ELEVATOR_TRIM_ID
Condition: Valid(SLOW_DRAG)
-
Case: True
Templates used:
-
ASOBO_GT_Update
Parameters set:
- UPDATE_ONCE
- UPDATE_CODE (using DRAG_AXIS_SCALE)
-
ASOBO_GT_Update
Parameters set:
- FREQUENCY
- UPDATE_CODE
-
ASOBO_GT_Update
Condition: Valid(HIGHLIGHT_NODE_ID_1)
-
Case: True
Parameters set:
- HIGHLIGHT_NODE_ID (using HIGHLIGHT_NODE_ID_1)
Condition: Check(INFINITE)
-
Case: True
Templates used:
-
ASOBO_GT_Lever_DraggingYAxis_Code
Parameters set:
- IS_LOOPING
-
ASOBO_GT_Lever_DraggingYAxis_Code
-
Case: False
Templates used:
-
ASOBO_GT_Lever_DraggingWheelLeftDrag_Axis
Parameters set:
- NO_ARROWS
- CURSOR
- ANIM_LENGTH
- ANIM_CODE (using IE_ELEVATOR_TRIM)
-
ASOBO_GT_Lever_DraggingWheelLeftDrag_Axis
Condition: Check(HIGHLIGHT_NODE_ID)
-
Case: True
Templates used:
-
ASOBO_GT_ComponentWith_PART_ID
Parameters set:
- NODE_ID (using HIGHLIGHT_NODE_ID)
-
ASOBO_GT_ComponentWith_PART_ID
Condition: Check(DOUBLE_WHEEL)
-
Case: True
Parameters read:
- NODE_ID2
Components:
-
#NODE_ID2# (Node: #NODE_ID2#)
Condition: Valid(HIGHLIGHT_NODE_ID_2)
-
Case: True
Parameters set:
- HIGHLIGHT_NODE_ID (using HIGHLIGHT_NODE_ID_2)
Condition: Check(INFINITE)
-
Case: True
Templates used:
-
ASOBO_GT_Interaction_DraggingYAxis_Code
Parameters set:
- HELPID
- IS_LOOPING
-
ASOBO_GT_Interaction_DraggingYAxis_Code
-
Case: False
Templates used:
-
ASOBO_GT_Interaction_WheelLeftDrag_Axis
Parameters set:
- NO_ARROWS
- CURSOR
-
ASOBO_GT_Interaction_WheelLeftDrag_Axis
-
-
Case: SWITCH
Templates used:
-
ASOBO_HANDLING_Trim_Variable_Speed_Base_Template
Parameters set:
- SWITCH_DIRECTION
- TRIM_NAME
- TRIM_TYPE
-
ASOBO_HANDLING_Trim_Variable_Speed_Base_Template
-
Default
-
ASOBO_HANDLING_Combined_Trim_SubTemplate
Definition from XML<Template Name="ASOBO_HANDLING_Combined_Trim_SubTemplate"> <Parameters Type="Default"> <NODE_ID>HANDLING_#INTERACTION_TYPE#_Combined_Trim</NODE_ID> <ANIM_NAME_L_R>HANDLING_#INTERACTION_TYPE#_Combined_Trim_L_R</ANIM_NAME_L_R> <ANIM_NAME_DN_UP>HANDLING_#INTERACTION_TYPE#_Combined_Trim_L_R</ANIM_NAME_DN_UP> <TRIM_UPDATE_FREQUENCY>20</TRIM_UPDATE_FREQUENCY> <WWISE_PREFIX>trim</WWISE_PREFIX> </Parameters> <Parameters Type="Override"> <TRIM_TYPE_0>#L_R_TRIM_TYPE#</TRIM_TYPE_0> <TRIM_TYPE_1>#UP_DN_TRIM_TYPE#</TRIM_TYPE_1> </Parameters> <Parameters Type="Override"> <Loop> <Setup> <Param>CUR_ID</Param> <From>0</From> <Inc>1</Inc> <To>1</To> </Setup> <Do> <Parameters Type="Override"> <TRIM_TYPE Process="Param">TRIM_TYPE_#CUR_ID#</TRIM_TYPE> </Parameters> <Switch Param="TRIM_TYPE"> <Case Value="RUDDER"> <INC_TRIM_#CUR_ID#>(>K:RUDDER_TRIM_RIGHT)</INC_TRIM_#CUR_ID#> <DEC_TRIM_#CUR_ID#>(>K:RUDDER_TRIM_LEFT)</DEC_TRIM_#CUR_ID#> <GET_TRIM_#CUR_ID#>(A:RUDDER TRIM, degrees)</GET_TRIM_#CUR_ID#> <TT_TRIM_#CUR_ID#>@TT_Package.HANDLING_KNOB_RUDDER_TRIM_ACTION</TT_TRIM_#CUR_ID#> </Case> <Case Value="AILERON"> <INC_TRIM_#CUR_ID#>(>K:AILERON_TRIM_RIGHT)</INC_TRIM_#CUR_ID#> <DEC_TRIM_#CUR_ID#>(>K:AILERON_TRIM_LEFT)</DEC_TRIM_#CUR_ID#> <GET_TRIM_#CUR_ID#>(A:AILERON TRIM, degrees)</GET_TRIM_#CUR_ID#> <TT_TRIM_#CUR_ID#>@TT_Package.HANDLING_KNOB_AILERON_ACTION</TT_TRIM_#CUR_ID#> </Case> <Case Value="ELEVATOR"> <INC_TRIM_#CUR_ID#>(>K:ELEV_TRIM_DN)</INC_TRIM_#CUR_ID#> <DEC_TRIM_#CUR_ID#>(>K:ELEV_TRIM_UP)</DEC_TRIM_#CUR_ID#> <GET_TRIM_#CUR_ID#>(A:ELEVATOR TRIM POSITION, degrees)</GET_TRIM_#CUR_ID#> <TT_TRIM_#CUR_ID#>@TT_Package.HANDLING_SWITCH_YOKE_ELEVATORTRIM_ACTION</TT_TRIM_#CUR_ID#> <TT_VALUE_3>@TT_Package.HANDLING_WHEEL_ELEVATOR_STATE_NOSEDOWN</TT_VALUE_3> <TT_VALUE_2>@TT_Package.HANDLING_WHEEL_ELEVATOR_STATE_NOSEUP</TT_VALUE_2> </Case> <Case Value="LONGITUDINAL"> <INC_TRIM_#CUR_ID#>(>K:ROTOR_LONGITUDINAL_TRIM_DEC)</INC_TRIM_#CUR_ID#> <DEC_TRIM_#CUR_ID#>(>K:ROTOR_LONGITUDINAL_TRIM_INC)</DEC_TRIM_#CUR_ID#> <GET_TRIM_#CUR_ID#>(A:ROTOR LONGITUDINAL TRIM PCT, percent)</GET_TRIM_#CUR_ID#> <TT_TRIM_#CUR_ID#>@TT_Package.HANDLING_JOYSTICK_LONGITUDINAL_TRIM_ACTION</TT_TRIM_#CUR_ID#> <FORMAT_VALUE>'%.1f %%' @sprintf</FORMAT_VALUE> </Case> <Case Value="LATERAL"> <INC_TRIM_#CUR_ID#>(>K:ROTOR_LATERAL_TRIM_INC)</INC_TRIM_#CUR_ID#> <DEC_TRIM_#CUR_ID#>(>K:ROTOR_LATERAL_TRIM_DEC)</DEC_TRIM_#CUR_ID#> <GET_TRIM_#CUR_ID#>(A:ROTOR LATERAL TRIM PCT, percent)</GET_TRIM_#CUR_ID#> <TT_TRIM_#CUR_ID#>@TT_Package.HANDLING_JOYSTICK_LATERAL_TRIM_ACTION</TT_TRIM_#CUR_ID#> <FORMAT_VALUE>'%.1f %%' @sprintf</FORMAT_VALUE> </Case> </Switch> </Do> </Loop> </Parameters> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <Parameters Type="Default"> <THRESHOLD_X_INPUT>0.01</THRESHOLD_X_INPUT> <THRESHOLD_X_MOUSE>0.001</THRESHOLD_X_MOUSE> <THRESHOLD_Y_INPUT>0.01</THRESHOLD_Y_INPUT> <THRESHOLD_Y_MOUSE>0.001</THRESHOLD_Y_MOUSE> <TOOLTIP_TITLE>@TT_Package.YOKE_PUSH_NOSE_TITLE</TOOLTIP_TITLE> <TT_DESCRIPTION_ID>@TT_Package.YOKE_PUSH_NOSE_ACTION</TT_DESCRIPTION_ID> <FORMAT_VALUE>'%.1f°' @sprintf</FORMAT_VALUE> <TT_VALUE_IS_DYNAMIC>True</TT_VALUE_IS_DYNAMIC> <STATE_VAR>HANDLING_#TRIM_TYPE_0#_#TRIM_TYPE_1#_Trim_Position</STATE_VAR> </Parameters> <UseTemplate Name="ASOBO_HANDLING_Axis_Event_Base_Template"> <IE_NAME>#TRIM_TYPE_0#_Trim</IE_NAME> <AXIS>X</AXIS> <LEFT_CODE_EXTERNAL>0 (>L:#STATE_VAR#)</LEFT_CODE_EXTERNAL> <IE_STANDBY_CODE>4 (>L:#STATE_VAR#)</IE_STANDBY_CODE> <RIGHT_CODE_EXTERNAL>1 (>L:#STATE_VAR#)</RIGHT_CODE_EXTERNAL> <TT_VALUE>#GET_TRIM_0# #FORMAT_VALUE#</TT_VALUE> <TT_DESCRIPTION_ID>#TT_TRIM_0#</TT_DESCRIPTION_ID> </UseTemplate> <UseTemplate Name="ASOBO_HANDLING_Axis_Event_Base_Template"> <IE_NAME>#TRIM_TYPE_1#_Trim</IE_NAME> <AXIS>Y</AXIS> <LEFT_CODE_EXTERNAL>2 (>L:#STATE_VAR#)</LEFT_CODE_EXTERNAL> <IE_STANDBY_CODE>4 (>L:#STATE_VAR#)</IE_STANDBY_CODE> <RIGHT_CODE_EXTERNAL>3 (>L:#STATE_VAR#)</RIGHT_CODE_EXTERNAL> <TT_VALUE>#GET_TRIM_1# #FORMAT_VALUE#</TT_VALUE> <TT_DESCRIPTION_ID>#TT_TRIM_1#</TT_DESCRIPTION_ID> </UseTemplate> <UseTemplate Name="ASOBO_HANDLING_Base_Template"> <IE_NAME>#TRIM_TYPE_0#_#TRIM_TYPE_1#_Trim</IE_NAME> <JOYSTICK_TYPE>5_STATES</JOYSTICK_TYPE> <JOYSTICK_INTERACTION_TYPE>POSITIONAL</JOYSTICK_INTERACTION_TYPE> <CREATE_COMPONENT>False</CREATE_COMPONENT> <IE_ID_EXTERNAL_0>#TRIM_TYPE_0#_Trim</IE_ID_EXTERNAL_0> <IE_ID_EXTERNAL_1>#TRIM_TYPE_1#_Trim</IE_ID_EXTERNAL_1> <ON_POS_LEFT>#DEC_TRIM_0#</ON_POS_LEFT> <ON_POS_RIGHT>#INC_TRIM_0#</ON_POS_RIGHT> <ON_POS_DOWN>#DEC_TRIM_1#</ON_POS_DOWN> <ON_POS_UP>#INC_TRIM_1#</ON_POS_UP> <GET_STATE_EXTERNAL>(L:#STATE_VAR#) sp0</GET_STATE_EXTERNAL> <LOCAL_VAR_TO_WATCH_0>#STATE_VAR#</LOCAL_VAR_TO_WATCH_0> <FREQUENCY>#TRIM_UPDATE_FREQUENCY#</FREQUENCY> </UseTemplate> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID (using INTERACTION_TYPE)
- ANIM_NAME_L_R (using INTERACTION_TYPE)
- ANIM_NAME_DN_UP (using INTERACTION_TYPE)
- TRIM_UPDATE_FREQUENCY
- WWISE_PREFIX
-
Override
Parameters set:
- TRIM_TYPE_0 (using L_R_TRIM_TYPE)
- TRIM_TYPE_1 (using UP_DN_TRIM_TYPE)
-
Override
Parameters set:
- CUR_ID
- TRIM_TYPE (using CUR_ID)
Condition: Switch(TRIM_TYPE)
-
Case: RUDDER
Parameters set:
- INC_TRIM_#CUR_ID#
- DEC_TRIM_#CUR_ID#
- GET_TRIM_#CUR_ID#
- TT_TRIM_#CUR_ID#
-
Case: AILERON
Parameters set:
- INC_TRIM_#CUR_ID#
- DEC_TRIM_#CUR_ID#
- GET_TRIM_#CUR_ID#
- TT_TRIM_#CUR_ID#
-
Case: ELEVATOR
Parameters set:
- INC_TRIM_#CUR_ID#
- DEC_TRIM_#CUR_ID#
- GET_TRIM_#CUR_ID#
- TT_TRIM_#CUR_ID#
- TT_VALUE_3
- TT_VALUE_2
-
Case: LONGITUDINAL
Parameters set:
- INC_TRIM_#CUR_ID#
- DEC_TRIM_#CUR_ID#
- GET_TRIM_#CUR_ID#
- TT_TRIM_#CUR_ID#
- FORMAT_VALUE
-
Case: LATERAL
Parameters set:
- INC_TRIM_#CUR_ID#
- DEC_TRIM_#CUR_ID#
- GET_TRIM_#CUR_ID#
- TT_TRIM_#CUR_ID#
- FORMAT_VALUE
Parameters read:
- NODE_ID
Components:
-
#NODE_ID# (Node: #NODE_ID#)
Parameters set:
- THRESHOLD_X_INPUT
- THRESHOLD_X_MOUSE
- THRESHOLD_Y_INPUT
- THRESHOLD_Y_MOUSE
- TOOLTIP_TITLE
- TT_DESCRIPTION_ID
- FORMAT_VALUE
- TT_VALUE_IS_DYNAMIC
- STATE_VAR (using TRIM_TYPE_0, TRIM_TYPE_1)
Templates used:
-
ASOBO_HANDLING_Axis_Event_Base_Template
Parameters set:
- IE_NAME (using TRIM_TYPE_0)
- AXIS
- LEFT_CODE_EXTERNAL (using STATE_VAR)
- IE_STANDBY_CODE (using STATE_VAR)
- RIGHT_CODE_EXTERNAL (using STATE_VAR)
- TT_VALUE (using GET_TRIM_0, FORMAT_VALUE)
- TT_DESCRIPTION_ID (using TT_TRIM_0)
-
ASOBO_HANDLING_Axis_Event_Base_Template
Parameters set:
- IE_NAME (using TRIM_TYPE_1)
- AXIS
- LEFT_CODE_EXTERNAL (using STATE_VAR)
- IE_STANDBY_CODE (using STATE_VAR)
- RIGHT_CODE_EXTERNAL (using STATE_VAR)
- TT_VALUE (using GET_TRIM_1, FORMAT_VALUE)
- TT_DESCRIPTION_ID (using TT_TRIM_1)
-
ASOBO_HANDLING_Base_Template
Parameters set:
- IE_NAME (using TRIM_TYPE_0, TRIM_TYPE_1)
- JOYSTICK_TYPE
- JOYSTICK_INTERACTION_TYPE
- CREATE_COMPONENT
- IE_ID_EXTERNAL_0 (using TRIM_TYPE_0)
- IE_ID_EXTERNAL_1 (using TRIM_TYPE_1)
- ON_POS_LEFT (using DEC_TRIM_0)
- ON_POS_RIGHT (using INC_TRIM_0)
- ON_POS_DOWN (using DEC_TRIM_1)
- ON_POS_UP (using INC_TRIM_1)
- GET_STATE_EXTERNAL (using STATE_VAR)
- LOCAL_VAR_TO_WATCH_0 (using STATE_VAR)
- FREQUENCY (using TRIM_UPDATE_FREQUENCY)
-
Default
-
ASOBO_HANDLING_AP_Trim_Disc_SubTemplate
Definition from XML<Template Name="ASOBO_HANDLING_AP_Trim_Disc_SubTemplate"> <Parameters Type="Default"> <TYPE>RudderAileron</TYPE> <SET_TRIM_ELEVATOR/> <SET_TRIM_RUDDER/> <SET_TRIM_AILERON/> <SET_TRIM_ELECTRICAL/> <GET_TRIM/> <ELECTRICAL_POWER_VAR_NAME>XMLVAR_Electrical_Trim_Disabled</ELECTRICAL_POWER_VAR_NAME> <ELECTRICAL_POWER_VAR_TYPE>L</ELECTRICAL_POWER_VAR_TYPE> </Parameters> <Parameters Type="Override"> <Switch Param="TYPE"> <Case Value="RudderAileron"> <SET_TRIM_RUDDER>l0 (>K:RUDDER_TRIM_DISABLED_SET)</SET_TRIM_RUDDER> <SET_TRIM_AILERON>l0 (>K:AILERON_TRIM_DISABLED_SET)</SET_TRIM_AILERON> <GET_TRIM>(A:RUDDER TRIM DISABLED, Bool) (A:ELEVATOR TRIM DISABLED, Bool) and</GET_TRIM> </Case> <Case Value="Elevator"> <SET_TRIM_ELEVATOR>l0 (>K:ELEVATOR_TRIM_DISABLED_SET)</SET_TRIM_ELEVATOR> <GET_TRIM>(A:ELEVATOR TRIM DISABLED, Bool)</GET_TRIM> </Case> <Case Value="Aileron"> <SET_TRIM_ELEVATOR>l0 (>K:AILERON_TRIM_DISABLED_SET)</SET_TRIM_ELEVATOR> <GET_TRIM>(A:AILERON TRIM DISABLED, Bool)</GET_TRIM> </Case> <Case Value="Electrical"> <SET_TRIM_ELECTRICAL>l0 (>#ELECTRICAL_POWER_VAR_TYPE#:#ELECTRICAL_POWER_VAR_NAME#)</SET_TRIM_ELECTRICAL> <GET_TRIM>(#ELECTRICAL_POWER_VAR_TYPE#:#ELECTRICAL_POWER_VAR_NAME#)</GET_TRIM> </Case> </Switch> </Parameters> <Parameters Type="Default"> <NODE_ID>HANDLING_#INTERACTION_TYPE#_AP_Trim_Disc_#ID#</NODE_ID> <ANIM_NAME>HANDLING_#INTERACTION_TYPE#_AP_Trim_Disc_#ID#</ANIM_NAME> <SET_TRIM>sp0 #SET_TRIM_ELEVATOR# #SET_TRIM_RUDDER# #SET_TRIM_AILERON# #SET_TRIM_ELECTRICAL#</SET_TRIM> <Switch Param="INTERACTION_TYPE"> <Case Value="PUSH"> <WWISE_EVENT_1>yoke_push_button_on</WWISE_EVENT_1> <WWISE_EVENT_2>yoke_push_button_off</WWISE_EVENT_2> </Case> <Case Value="SWITCH"> <WWISE_EVENT_1>yoke_push_button_on</WWISE_EVENT_1> <WWISE_EVENT_2>yoke_push_button_off</WWISE_EVENT_2> </Case> </Switch> </Parameters> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <Parameters Type="Default"> <ANIM_VAR>_ButtonDown</ANIM_VAR> <ANIM_VAR_TYPE>O</ANIM_VAR_TYPE> </Parameters> <Parameters Type="Override"> <Switch Param="INTERACTION_TYPE"> <Case Value="PUSH"> <PUSH_EVENT>1 #SET_TRIM# 1 (>K:AUTOPILOT_OFF) (>H:Generic_Autopilot_Disc) 100 (>#ANIM_VAR_TYPE#:#ANIM_VAR#)</PUSH_EVENT> <RELEASE_EVENT>0 #SET_TRIM# 0 (>#ANIM_VAR_TYPE#:#ANIM_VAR#)</RELEASE_EVENT> </Case> </Switch> <BTN_ID>Trim_Disconnect</BTN_ID> <TOOLTIP_TITLE>@TT_Package.YOKE_PUSH_AP_TRIM_DISC_TITLE</TOOLTIP_TITLE> <TOOLTIP_ENTRY_0>HANDLING_Trim_Disconnect</TOOLTIP_ENTRY_0> <TT_DESCRIPTION_ID>@TT_Package.YOKE_PUSH_AP_TRIM_DISC_ACTION</TT_DESCRIPTION_ID> </Parameters> <Switch Param="INTERACTION_TYPE"> <Case Value="PUSH"> <UseInputEvent ID="HANDLING"> <BINDING_DEC_0>Release</BINDING_DEC_0> <BINDING_DEC_0_PARAM_0>0</BINDING_DEC_0_PARAM_0> <SET_STATE_EXTERNAL>p0 if{ #PUSH_EVENT# } els{ #RELEASE_EVENT# }</SET_STATE_EXTERNAL> <BINDING_INC_0>Push</BINDING_INC_0> <BINDING_INC_0_PARAM_0>1</BINDING_INC_0_PARAM_0> <ANIM>EXTERNAL</ANIM> <TT_VALUE>#GET_TRIM# if{ (R:1:@TT_Package.GT_STATE_DISCONNECTED) } els{ (R:1:@TT_Package.GT_STATE_CONNECTED) }</TT_VALUE> <TT_VALUE_IS_DYNAMIC>True</TT_VALUE_IS_DYNAMIC> </UseInputEvent> <UseTemplate Name="ASOBO_GT_Push_Button_Held"> <LEFT_SINGLE_CODE>(>B:HANDLING_#BTN_ID#_Push)</LEFT_SINGLE_CODE> <LEFT_LEAVE_CODE>(>B:HANDLING_#BTN_ID#_Release)</LEFT_LEAVE_CODE> <OVERRIDE_ANIM_CODE>(#ANIM_VAR_TYPE#:#ANIM_VAR#)</OVERRIDE_ANIM_CODE> </UseTemplate> </Case> <Case Value="SWITCH"> <UseInputEvent ID="HANDLING"> <GET_STATE_EXTERNAL>#GET_TRIM# sp0</GET_STATE_EXTERNAL> <SET_STATE_ON>1 #SET_TRIM#</SET_STATE_ON> <SET_STATE_OFF>0 #SET_TRIM#</SET_STATE_OFF> <SIM_STATE_IS_ON_EXTERNAL>l0</SIM_STATE_IS_ON_EXTERNAL> <ANIM>EXTERNAL</ANIM> </UseInputEvent> <UseTemplate Name="ASOBO_GT_Switch_Code"> <LEFT_SINGLE_CODE>(>B:HANDLING_#BTN_ID#_Toggle)</LEFT_SINGLE_CODE> <ANIM_CODE>(B:HANDLING_#BTN_ID#, Bool) 100 *</ANIM_CODE> </UseTemplate> </Case> </Switch> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- TYPE
- SET_TRIM_ELEVATOR
- SET_TRIM_RUDDER
- SET_TRIM_AILERON
- SET_TRIM_ELECTRICAL
- GET_TRIM
- ELECTRICAL_POWER_VAR_NAME
- ELECTRICAL_POWER_VAR_TYPE
-
Override
Condition: Switch(TYPE)
-
Case: RudderAileron
Parameters set:
- SET_TRIM_RUDDER
- SET_TRIM_AILERON
- GET_TRIM
-
Case: Elevator
Parameters set:
- SET_TRIM_ELEVATOR
- GET_TRIM
-
Case: Aileron
Parameters set:
- SET_TRIM_ELEVATOR
- GET_TRIM
-
Case: Electrical
Parameters set:
- SET_TRIM_ELECTRICAL (using ELECTRICAL_POWER_VAR_TYPE, ELECTRICAL_POWER_VAR_NAME)
- GET_TRIM (using ELECTRICAL_POWER_VAR_TYPE, ELECTRICAL_POWER_VAR_NAME)
-
-
Default
Parameters set:
- NODE_ID (using INTERACTION_TYPE, ID)
- ANIM_NAME (using INTERACTION_TYPE, ID)
- SET_TRIM (using SET_TRIM_ELEVATOR, SET_TRIM_RUDDER, SET_TRIM_AILERON, SET_TRIM_ELECTRICAL)
Condition: Switch(INTERACTION_TYPE)
-
Case: PUSH
Parameters set:
- WWISE_EVENT_1
- WWISE_EVENT_2
-
Case: SWITCH
Parameters set:
- WWISE_EVENT_1
- WWISE_EVENT_2
Parameters read:
- NODE_ID
Components:
-
#NODE_ID# (Node: #NODE_ID#)
Parameters set:
- ANIM_VAR
- ANIM_VAR_TYPE
- BTN_ID
- TOOLTIP_TITLE
- TOOLTIP_ENTRY_0
- TT_DESCRIPTION_ID
Condition: Switch(INTERACTION_TYPE)
-
Case: PUSH
Parameters set:
- PUSH_EVENT (using SET_TRIM, ANIM_VAR_TYPE, ANIM_VAR)
- RELEASE_EVENT (using SET_TRIM, ANIM_VAR_TYPE, ANIM_VAR)
Condition: Switch(INTERACTION_TYPE)
-
Case: PUSH
Parameters set:
- BINDING_DEC_0
- BINDING_DEC_0_PARAM_0
- SET_STATE_EXTERNAL (using PUSH_EVENT, RELEASE_EVENT)
- BINDING_INC_0
- BINDING_INC_0_PARAM_0
- ANIM
- TT_VALUE (using GET_TRIM)
- TT_VALUE_IS_DYNAMIC
Templates used:
-
ASOBO_GT_Push_Button_Held
Parameters set:
- LEFT_SINGLE_CODE (using BTN_ID)
- LEFT_LEAVE_CODE (using BTN_ID)
- OVERRIDE_ANIM_CODE (using ANIM_VAR_TYPE, ANIM_VAR)
-
Case: SWITCH
Parameters set:
- GET_STATE_EXTERNAL (using GET_TRIM)
- SET_STATE_ON (using SET_TRIM)
- SET_STATE_OFF (using SET_TRIM)
- SIM_STATE_IS_ON_EXTERNAL
- ANIM
Templates used:
-
ASOBO_GT_Switch_Code
Parameters set:
- LEFT_SINGLE_CODE (using BTN_ID)
- ANIM_CODE (using BTN_ID)
-
Default
-
ASOBO_HANDLING_Trim_Variable_Speed_Base_Template
Definition from XML<Template Name="ASOBO_HANDLING_Trim_Variable_Speed_Base_Template"> <Parameters Type="Default"> <Switch Param="TRIM_TYPE"> <Case Value="Elevator"> <GET_TRIM>(A:ELEVATOR TRIM PCT, percent)</GET_TRIM> <SET_TRIM>(>K:ELEVATOR_TRIM_SET)</SET_TRIM> <ELEVATOR_TRIM_ID>1</ELEVATOR_TRIM_ID> </Case> <Case Value="Rudder"> <GET_TRIM>(A:RUDDER TRIM PCT, Percent)</GET_TRIM> <SET_TRIM>(>K:RUDDER_TRIM_SET_EX1)</SET_TRIM> <RUDDER_TRIM_ID>1</RUDDER_TRIM_ID> </Case> <Case Value="Ailerons"> <GET_TRIM>(A:AILERON TRIM PCT, percent)</GET_TRIM> <SET_TRIM>(>K:AILERON_TRIM_SET_EX1)</SET_TRIM> <TRIM_LIMIT>10</TRIM_LIMIT> <AILERONS_TRIM_ID>1</AILERONS_TRIM_ID> </Case> </Switch> <UPDATE_FREQ>10</UPDATE_FREQ> <UPDATE_COUNT_BEFORE_FAST_MODE>40</UPDATE_COUNT_BEFORE_FAST_MODE> <UPDATE_COUNT_BEFORE_REPEAT>5</UPDATE_COUNT_BEFORE_REPEAT> <MOMENTARY_MIN_DURATION>0.1</MOMENTARY_MIN_DURATION> <TRIM_LIMIT>10</TRIM_LIMIT> <NORMAL_INC_DEGREES>0.1</NORMAL_INC_DEGREES> <FAST_MODE_SCALE>3</FAST_MODE_SCALE> <SCALE_INCREMENT>163.83 * 16383 min -16383 max</SCALE_INCREMENT> <Condition Valid="LOCK_NODE_ID"> <VAR_NAME_TRIM_LOCK_UNLOCKED>XMLVAR_#TRIM_NAME##ID#_Unlocked</VAR_NAME_TRIM_LOCK_UNLOCKED> <VAR_SCOPE_TRIM_LOCK_UNLOCKED>I</VAR_SCOPE_TRIM_LOCK_UNLOCKED> </Condition> <Condition Check="SECONDARY"> <True> <ADDITIONAL_TESTS>(B:HANDLING_Secondary_#TRIM_NAME#_Available, Bool) and</ADDITIONAL_TESTS> </True> <False> <ADDITIONAL_TESTS/> </False> </Condition> <SWITCH_DIRECTION>Horizontal</SWITCH_DIRECTION> <COUNT>2</COUNT> <ELECTRICAL_POWER>False</ELECTRICAL_POWER> <ELECTRICAL_POWER_VAR_NAME>XMLVAR_Electrical_Trim_Disabled</ELECTRICAL_POWER_VAR_NAME> <ELECTRICAL_POWER_VAR_TYPE>L</ELECTRICAL_POWER_VAR_TYPE> </Parameters> <Parameters Type="Override"> <Condition Valid="ELECTRICAL_POWER"> <True> <ADDITIONAL_TESTS>#ADDITIONAL_TESTS# (#ELECTRICAL_POWER_VAR_TYPE#:#ELECTRICAL_POWER_VAR_NAME#) ! and</ADDITIONAL_TESTS> </True> </Condition> </Parameters> <Parameters Type="Override"> <NORMAL_MODE_PERCENT_PER_UPDATE process="Float">#NORMAL_INC_DEGREES# #TRIM_LIMIT# / 100 *</NORMAL_MODE_PERCENT_PER_UPDATE> <FAST_MODE_PERCENT_PER_UPDATE process="Float">#NORMAL_INC_DEGREES# #TRIM_LIMIT# / #FAST_MODE_SCALE# * 100 *</FAST_MODE_PERCENT_PER_UPDATE> <STATE0_TEST>(O:_TrimDelta) 0 ></STATE0_TEST> <STATE1_TEST>(O:_TrimDelta) 0 ==</STATE1_TEST> <STATE2_TEST>(O:_TrimDelta) 0 <</STATE2_TEST> <Condition Valid="LOCK_NODE_ID"> <True> <CODE_POS_0_VERIF>(#VAR_SCOPE_TRIM_LOCK_UNLOCKED#:#VAR_NAME_TRIM_LOCK_UNLOCKED#)</CODE_POS_0_VERIF> <CODE_POS_2_VERIF>(#VAR_SCOPE_TRIM_LOCK_UNLOCKED#:#VAR_NAME_TRIM_LOCK_UNLOCKED#)</CODE_POS_2_VERIF> </True> </Condition> </Parameters> <Condition Valid="LOCK_NODE_ID"> <True> <Component ID="#LOCK_NODE_ID#" Node="#LOCK_NODE_ID#"> <UseTemplate Name="ASOBO_GT_Switch_Code"> <ANIM_NAME>#LOCK_ANIM_NAME#</ANIM_NAME> <LEFT_SINGLE_CODE> (#VAR_SCOPE_TRIM_LOCK_UNLOCKED#:#VAR_NAME_TRIM_LOCK_UNLOCKED#) ! (>#VAR_SCOPE_TRIM_LOCK_UNLOCKED#:#VAR_NAME_TRIM_LOCK_UNLOCKED#) </LEFT_SINGLE_CODE> <ANIM_CODE> (#VAR_SCOPE_TRIM_LOCK_UNLOCKED#:#VAR_NAME_TRIM_LOCK_UNLOCKED#) 100 * </ANIM_CODE> </UseTemplate> </Component> </True> </Condition> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <Parameters Type="Override"> <INC_STATE>0</INC_STATE> <DEC_STATE>2</DEC_STATE> <CODE_POS_0> 1 (>O:_TrimDelta) 1 #ADDITIONAL_TESTS# if{ #GET_TRIM# #NORMAL_MODE_PERCENT_PER_UPDATE# - #SCALE_INCREMENT# #SET_TRIM# } </CODE_POS_0> <CODE_POS_1> 0 (>O:_TrimDelta) 0 (>O:_UPDATE_Count) </CODE_POS_1> <CODE_POS_2> -1 (>O:_TrimDelta) 1 #ADDITIONAL_TESTS# if{ #GET_TRIM# #NORMAL_MODE_PERCENT_PER_UPDATE# + #SCALE_INCREMENT# #SET_TRIM# } </CODE_POS_2> <STATE_MAX_TIMER>#MOMENTARY_MIN_DURATION#</STATE_MAX_TIMER> <STATE0_TIMER>#MOMENTARY_MIN_DURATION#</STATE0_TIMER> </Parameters> <UseInputEvent ID="HANDLING"/> <UseTemplate Name="ASOBO_GT_Update"> <FREQUENCY>#UPDATE_FREQ#</FREQUENCY> <UPDATE_CODE> (O:_TrimDelta) 0 != #ADDITIONAL_TESTS# if{ (O:_UPDATE_Count) #UPDATE_COUNT_BEFORE_FAST_MODE# >= if{ (O:_TrimDelta) 0 > if{ #GET_TRIM# #FAST_MODE_PERCENT_PER_UPDATE# - #SCALE_INCREMENT# #SET_TRIM# } els{ #GET_TRIM# #FAST_MODE_PERCENT_PER_UPDATE# + #SCALE_INCREMENT# #SET_TRIM# } } els{ (O:_UPDATE_Count) #UPDATE_COUNT_BEFORE_REPEAT# >= if{ (O:_TrimDelta) 0 > if{ #GET_TRIM# #NORMAL_MODE_PERCENT_PER_UPDATE# - #SCALE_INCREMENT# #SET_TRIM# } els{ #GET_TRIM# #NORMAL_MODE_PERCENT_PER_UPDATE# + #SCALE_INCREMENT# #SET_TRIM# } } (O:_UPDATE_Count) 1 + (>O:_UPDATE_Count) } } </UPDATE_CODE> </UseTemplate> <UseTemplate Name="ASOBO_GT_Switch_3States"> <MOMENTARY_SWITCH/> </UseTemplate> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- UPDATE_FREQ
- UPDATE_COUNT_BEFORE_FAST_MODE
- UPDATE_COUNT_BEFORE_REPEAT
- MOMENTARY_MIN_DURATION
- TRIM_LIMIT
- NORMAL_INC_DEGREES
- FAST_MODE_SCALE
- SCALE_INCREMENT
- SWITCH_DIRECTION
- COUNT
- ELECTRICAL_POWER
- ELECTRICAL_POWER_VAR_NAME
- ELECTRICAL_POWER_VAR_TYPE
Condition: Switch(TRIM_TYPE)
-
Case: Elevator
Parameters set:
- GET_TRIM
- SET_TRIM
- ELEVATOR_TRIM_ID
-
Case: Rudder
Parameters set:
- GET_TRIM
- SET_TRIM
- RUDDER_TRIM_ID
-
Case: Ailerons
Parameters set:
- GET_TRIM
- SET_TRIM
- TRIM_LIMIT
- AILERONS_TRIM_ID
Condition: Valid(LOCK_NODE_ID)
-
Case: True
Parameters set:
- VAR_NAME_TRIM_LOCK_UNLOCKED (using TRIM_NAME, ID)
- VAR_SCOPE_TRIM_LOCK_UNLOCKED
Condition: Check(SECONDARY)
-
Case: True
Parameters set:
- ADDITIONAL_TESTS (using TRIM_NAME)
-
Case: False
Parameters set:
- ADDITIONAL_TESTS
-
Override
Condition: Valid(ELECTRICAL_POWER)
-
Case: True
Parameters set:
- ADDITIONAL_TESTS (using ADDITIONAL_TESTS, ELECTRICAL_POWER_VAR_TYPE, ELECTRICAL_POWER_VAR_NAME)
-
-
Override
Parameters set:
- NORMAL_MODE_PERCENT_PER_UPDATE (using NORMAL_INC_DEGREES, TRIM_LIMIT)
- FAST_MODE_PERCENT_PER_UPDATE (using NORMAL_INC_DEGREES, TRIM_LIMIT, FAST_MODE_SCALE)
- STATE0_TEST
- STATE1_TEST
- STATE2_TEST
Condition: Valid(LOCK_NODE_ID)
-
Case: True
Parameters set:
- CODE_POS_0_VERIF (using VAR_SCOPE_TRIM_LOCK_UNLOCKED, VAR_NAME_TRIM_LOCK_UNLOCKED)
- CODE_POS_2_VERIF (using VAR_SCOPE_TRIM_LOCK_UNLOCKED, VAR_NAME_TRIM_LOCK_UNLOCKED)
Parameters read:
- NODE_ID
Components:
-
#NODE_ID# (Node: #NODE_ID#)
Parameters set:
- INC_STATE
- DEC_STATE
- CODE_POS_0 (using ADDITIONAL_TESTS, GET_TRIM, NORMAL_MODE_PERCENT_PER_UPDATE, SCALE_INCREMENT, SET_TRIM)
- CODE_POS_1
- CODE_POS_2 (using ADDITIONAL_TESTS, GET_TRIM, NORMAL_MODE_PERCENT_PER_UPDATE, SCALE_INCREMENT, SET_TRIM)
- STATE_MAX_TIMER (using MOMENTARY_MIN_DURATION)
- STATE0_TIMER (using MOMENTARY_MIN_DURATION)
Templates used:
-
ASOBO_GT_Update
Parameters set:
- FREQUENCY (using UPDATE_FREQ)
- UPDATE_CODE (using ADDITIONAL_TESTS, UPDATE_COUNT_BEFORE_FAST_MODE, GET_TRIM, FAST_MODE_PERCENT_PER_UPDATE, SCALE_INCREMENT, SET_TRIM, UPDATE_COUNT_BEFORE_REPEAT, NORMAL_MODE_PERCENT_PER_UPDATE)
-
ASOBO_GT_Switch_3States
Parameters set:
- MOMENTARY_SWITCH
Condition: Valid(LOCK_NODE_ID)
-
Case: True
Parameters read:
- LOCK_NODE_ID
Components:
-
#LOCK_NODE_ID# (Node: #LOCK_NODE_ID#)
Templates used:
-
ASOBO_GT_Switch_Code
Parameters set:
- ANIM_NAME (using LOCK_ANIM_NAME)
- LEFT_SINGLE_CODE (using VAR_SCOPE_TRIM_LOCK_UNLOCKED, VAR_NAME_TRIM_LOCK_UNLOCKED)
- ANIM_CODE (using VAR_SCOPE_TRIM_LOCK_UNLOCKED, VAR_NAME_TRIM_LOCK_UNLOCKED)
-
ASOBO_GT_Switch_Code
-
Default
-
ASOBO_HANDLING_Secondary_Trim_Available_SubTemplate
Definition from XML<Template Name="ASOBO_HANDLING_Secondary_Trim_Available_SubTemplate"> <Parameters Type="Default"> <NODE_ID>HANDLING_#INTERACTION_TYPE#_Secondary_#TRIM_NAME#Trim_Available</NODE_ID> <ANIM_NAME>HANDLING_#INTERACTION_TYPE#_Secondary_#TRIM_NAME#Trim_Available</ANIM_NAME> <COVER_NODE_ID>HANDLING_Switch_Secondary_#TRIM_NAME#Trim_Available_Cover</COVER_NODE_ID> <COVER_ANIM_NAME>HANDLING_Switch_Secondary_#TRIM_NAME#Trim_Available_Cover</COVER_ANIM_NAME> <PART_ID>HANDLING_#INTERACTION_TYPE#_Secondary_#TRIM_NAME#Trim_Available</PART_ID> <Switch Param="INTERACTION_TYPE"> <Case Value="Push"> <COUNT>2</COUNT> <WWISE_EVENT_1>secondary_trim_switch_on</WWISE_EVENT_1> <NORMALIZED_TIME_1>0.1</NORMALIZED_TIME_1> <WWISE_EVENT_2>secondary_trim_switch_off</WWISE_EVENT_2> <NORMALIZED_TIME_2>0.5</NORMALIZED_TIME_2> </Case> </Switch> <Switch Param="TRIM_NAME"> <Case Value="Elevator"> <TT_DESCRIPTION_ID>@TT_Package.HANDLING_PUSH_ELEVATORTRIM_SECONDARY_ACTION_SET</TT_DESCRIPTION_ID> <TOOLTIP_TITLE>@TT_Package.HANDLING_PUSH_ELEVATORTRIM_SECONDARY_TITLE</TOOLTIP_TITLE> </Case> </Switch> </Parameters> <Parameters Type="Override"> <BTN_ID>Secondary_#TRIM_NAME#Trim_Available</BTN_ID> </Parameters> <Switch Param="INTERACTION_TYPE"> <Case Value="Push"> <UseTemplate Name="ASOBO_GT_Push_Button_Airliner"> <INPUT_EVENT_ID>HANDLING</INPUT_EVENT_ID> <TOOLTIP_ENTRY_0>HANDLING_#BTN_ID#</TOOLTIP_ENTRY_0> <SET_STATE_EXTERNAL>p0 (>O:XMLVAR_#BTN_ID#)</SET_STATE_EXTERNAL> <GET_STATE_EXTERNAL>(O:XMLVAR_#BTN_ID#) sp0</GET_STATE_EXTERNAL> <SIM_STATE_IS_ON_EXTERNAL>l0</SIM_STATE_IS_ON_EXTERNAL> <SEQ1_EMISSIVE_CODE>(B:HANDLING_#BTN_ID#, Bool)</SEQ1_EMISSIVE_CODE> <SEQ2_EMISSIVE_CODE>(B:HANDLING_#BTN_ID#, Bool) !</SEQ2_EMISSIVE_CODE> <LEFT_SINGLE_CODE>(>B:HANDLING_#BTN_ID#_Toggle)</LEFT_SINGLE_CODE> </UseTemplate> </Case> </Switch> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID (using INTERACTION_TYPE, TRIM_NAME)
- ANIM_NAME (using INTERACTION_TYPE, TRIM_NAME)
- COVER_NODE_ID (using TRIM_NAME)
- COVER_ANIM_NAME (using TRIM_NAME)
- PART_ID (using INTERACTION_TYPE, TRIM_NAME)
Condition: Switch(INTERACTION_TYPE)
-
Case: Push
Parameters set:
- COUNT
- WWISE_EVENT_1
- NORMALIZED_TIME_1
- WWISE_EVENT_2
- NORMALIZED_TIME_2
Condition: Switch(TRIM_NAME)
-
Case: Elevator
Parameters set:
- TT_DESCRIPTION_ID
- TOOLTIP_TITLE
-
Override
Parameters set:
- BTN_ID (using TRIM_NAME)
Condition: Switch(INTERACTION_TYPE)
-
Case: Push
Templates used:
-
ASOBO_GT_Push_Button_Airliner
Parameters set:
- INPUT_EVENT_ID
- TOOLTIP_ENTRY_0 (using BTN_ID)
- SET_STATE_EXTERNAL (using BTN_ID)
- GET_STATE_EXTERNAL (using BTN_ID)
- SIM_STATE_IS_ON_EXTERNAL
- SEQ1_EMISSIVE_CODE (using BTN_ID)
- SEQ2_EMISSIVE_CODE (using BTN_ID)
- LEFT_SINGLE_CODE (using BTN_ID)
-
ASOBO_GT_Push_Button_Airliner
-
Default
-
ASOBO_HANDLING_Spoilers_Int_SubTemplate
Definition from XML<Template Name="ASOBO_HANDLING_Spoilers_Int_SubTemplate"> <Parameters Type="Default"> <ANIM_NAME>HANDLING_#INTERACTION_TYPE#_Spoilers</ANIM_NAME> <NODE_ID>HANDLING_#INTERACTION_TYPE#_Spoilers</NODE_ID> <PART_ID>HANDLING_#INTERACTION_TYPE#_Spoilers</PART_ID> <WWISE_PREFIX>spoilers</WWISE_PREFIX> <RETRACT_ARMED_FULL>False</RETRACT_ARMED_FULL> <POS_DOWN>1</POS_DOWN> <POS_ARM>0</POS_ARM> <Switch Param="INTERACTION_TYPE"> <Case Value="Lever"> <DRAG_AXIS_SCALE>100</DRAG_AXIS_SCALE> <DRAG_SPEED>30</DRAG_SPEED> <Condition Valid="USE_LOCK"> <TT_ICON_LOCK>MOVE_Y</TT_ICON_LOCK> <WWISE_EVENT_LOCK_1>lever_spoiler_lock_on</WWISE_EVENT_LOCK_1> <WWISE_EVENT_LOCK_2>lever_spoiler_lock_off</WWISE_EVENT_LOCK_2> <LOCK_NODE_ID>HANDLING_Lever_Spoilers_Lock</LOCK_NODE_ID> <LOCK_ANIM_NAME>HANDLING_Lever_Spoilers_Lock</LOCK_ANIM_NAME> <LOCK_VAR_SCOPE>I</LOCK_VAR_SCOPE> <LOCK_VAR_NAME>XMLVAR_LeverSpoilerLocked</LOCK_VAR_NAME> <TOOLTIP_SPOILERS_LOCK_TITLE>@TT_Package.HANDLING_LEVER_SPOILERS_LOCK_TITLE</TOOLTIP_SPOILERS_LOCK_TITLE> <TT_DESCRIPTION_ID_SPOILERS_LOCK>@TT_Package.HANDLING_LEVER_SPOILERS_LOCK_ACTION</TT_DESCRIPTION_ID_SPOILERS_LOCK> </Condition> <Switch Param="TYPE"> <Case Value="AIRLINER"> <Condition Valid="PHYSICAL_AUTOSPOILER"> <True> <ARMED_STATE_TEST>(A:SPOILERS ARMED, Bool) (A:SPOILERS HANDLE POSITION, Percent over 100) 0 == and</ARMED_STATE_TEST> </True> <False> <ARMED_STATE_TEST>(A:SPOILERS ARMED, Bool)</ARMED_STATE_TEST> </False> </Condition> <ANIM_TRIGGER_COUNT>3</ANIM_TRIGGER_COUNT> <STEPS_NUMBER>3</STEPS_NUMBER> <USE_GATES>True</USE_GATES> <ANIM_LENGTH>100</ANIM_LENGTH> </Case> </Switch> <WWISE_EVENT>lever_speedbrakes</WWISE_EVENT> <MIN_VALUE>0</MIN_VALUE> <MAX_VALUE>@16k</MAX_VALUE> <LEVER_ANIM_LAG>100</LEVER_ANIM_LAG> </Case> <Case Value="Switch"> <TIME_TO_FULL_RANGE_SEC>2</TIME_TO_FULL_RANGE_SEC> <REPEAT_FREQUENCY>10</REPEAT_FREQUENCY> <MOMENTARY_TIMER>0.1</MOMENTARY_TIMER> <POS_DEC>0</POS_DEC> <POS_STANDBY>1</POS_STANDBY> <POS_INC>2</POS_INC> <ADDITIONAL_TESTS/> <Switch Param="PUSH_TYPE"> <Case Value="EXTEND_FULL"> <ANIM_NAME_PUSH>HANDLING_#INTERACTION_TYPE#_Spoilers_Push</ANIM_NAME_PUSH> <INVERT_ANIM_PUSH>False</INVERT_ANIM_PUSH> </Case> </Switch> </Case> </Switch> <TT_DESCRIPTION_ID>@TT_Package.HANDLING_LEVER_SPOILERS_ACTION</TT_DESCRIPTION_ID> <TT_DESCRIPTION_ID_EXTEND>@TT_Package.HANDLING_LEVER_SPOILERS_ACTION_EXTEND</TT_DESCRIPTION_ID_EXTEND> <TOOLTIP_TITLE>@TT_Package.HANDLING_LEVER_SPOILERS_TITLE</TOOLTIP_TITLE> </Parameters> <Parameters Type="Override"> <Switch Param="INTERACTION_TYPE"> <Case Value="Switch"> <INCREMENT Process="Int">16384 #TIME_TO_FULL_RANGE_SEC# / #REPEAT_FREQUENCY# /</INCREMENT> <MOMENTARY_SWITCH/> <STATE0_TIMER>#MOMENTARY_TIMER#</STATE0_TIMER> <STATE_MAX_TIMER>#MOMENTARY_TIMER#</STATE_MAX_TIMER> <STATE_STANDBY>0</STATE_STANDBY> <STATE_INC>1</STATE_INC> <STATE_DEC>2</STATE_DEC> <Switch Param="PUSH_TYPE"> <Case Value="EXTEND_FULL"> <ADDITIONAL_TESTS>#ADDITIONAL_TESTS# (B:HANDLING_Spoilers_Extend, Bool) ! and</ADDITIONAL_TESTS> </Case> </Switch> </Case> </Switch> </Parameters> <Switch Param="INTERACTION_TYPE"> <Case Value="Lever"> <Condition Valid="USE_GATES"> <Condition Valid="RETRACT_ARMED_FULL"> <True> <UseTemplate Name="ASOBO_HANDLING_Push_Event_Base_Template"> <IE_NAME>Spoilers_Arm</IE_NAME> <SET_STATE_EXTERNAL>p0 ! (A:SPOILERS HANDLE POSITION, position 16k) 0 == and (>K:SPOILERS_ARM_SET)</SET_STATE_EXTERNAL> <GET_STATE_EXTERNAL>(A:SPOILERS HANDLE POSITION, position 16k) 0 > if{ 0 (>K:SPOILERS_ARM_SET) } (A:SPOILERS ARMED, Bool) sp0 </GET_STATE_EXTERNAL> <STR_STATE_ON>Armed</STR_STATE_ON> <STR_STATE_OFF>Standby</STR_STATE_OFF> <TT_VALUE_ON>(R:1:@TT_Package.GT_STATE_ARMED)</TT_VALUE_ON> <TT_VALUE_OFF>(R:1:@TT_Package.GT_STATE_STANDBY)</TT_VALUE_OFF> <SIMVAR_TO_WATCH_0>SPOILERS ARMED</SIMVAR_TO_WATCH_0> <SIMVAR_TO_WATCH_1>SPOILERS HANDLE POSITION</SIMVAR_TO_WATCH_1> </UseTemplate> </True> <False> <UseTemplate Name="ASOBO_HANDLING_Push_Event_Base_Template"> <IE_NAME>Spoilers_Arm</IE_NAME> <SET_STATE_EXTERNAL>p0 (A:SPOILERS HANDLE POSITION, position 16k) 0 == and (>K:SPOILERS_ARM_SET)</SET_STATE_EXTERNAL> <GET_STATE_EXTERNAL>(A:SPOILERS HANDLE POSITION, position 16k) 0 > if{ 0 (>K:SPOILERS_ARM_SET) } (A:SPOILERS ARMED, Bool) sp0 </GET_STATE_EXTERNAL> <STR_STATE_ON>Armed</STR_STATE_ON> <STR_STATE_OFF>Standby</STR_STATE_OFF> <TT_VALUE_ON>(R:1:@TT_Package.GT_STATE_ARMED)</TT_VALUE_ON> <TT_VALUE_OFF>(R:1:@TT_Package.GT_STATE_STANDBY)</TT_VALUE_OFF> <SIMVAR_TO_WATCH_0>SPOILERS ARMED</SIMVAR_TO_WATCH_0> <SIMVAR_TO_WATCH_1>SPOILERS HANDLE POSITION</SIMVAR_TO_WATCH_1> </UseTemplate> </False> </Condition> </Condition> <UseTemplate Name="ASOBO_HANDLING_Base_Template"> <IE_NAME>Spoilers</IE_NAME> <GATE_DIRECTION>0</GATE_DIRECTION> <DONT_SYNC_DRAG_TO_ANIM>True</DONT_SYNC_DRAG_TO_ANIM> <DRAG_ANIM_NAME>#ANIM_NAME#</DRAG_ANIM_NAME> <DRAG_NODE_ID>#NODE_ID#</DRAG_NODE_ID> <GET_TT_VALUE_STATE>(A:SPOILERS ARMED, Bool) sp0 (A:SPOILERS HANDLE POSITION, Percent) sp1</GET_TT_VALUE_STATE> <FORMAT_VALUE>l0 if{ (R:1:@TT_Package.GT_STATE_ARMED) } els{ l1 '%.1f%%' @sprintf }</FORMAT_VALUE> <SIMVAR_TO_WATCH_0>SPOILERS HANDLE POSITION</SIMVAR_TO_WATCH_0> <GET_STATE_EXTERNAL>(A:SPOILERS HANDLE POSITION, position 16k)</GET_STATE_EXTERNAL> <SET_STATE_EXTERNAL>(>K:SPOILERS_SET)</SET_STATE_EXTERNAL> <Condition Valid="USE_LOCK"> <ON_BEFORE_SET_CODE>(B:HANDLING_Spoilers_Lock, Bool) if{ quit } </ON_BEFORE_SET_CODE> </Condition> <STATE_TO_POS_EXTERNAL>@16k / 100 *</STATE_TO_POS_EXTERNAL> <INC_PARAM_0 Process="Int">@16k 10 /</INC_PARAM_0> <DEC_PARAM_0 Process="Int">@16k 10 /</DEC_PARAM_0> <Condition Valid="USE_GATES"> <True> <TEMPLATE_TO_USE>ASOBO_GT_Lever_DraggingYAxis_Gates</TEMPLATE_TO_USE> <DRAG_CODE> (O:Position) 1 < s0 (>B:HANDLING_Spoilers_Arm_Set) 0 (O:Position) 1 - #STEPS_NUMBER# 1 - / @16k * l0 ? (>B:HANDLING_Spoilers_Set) </DRAG_CODE> <Condition Valid="RETRACT_ARMED_FULL"> <FORMAT_VALUE>l0 if{ (R:1:@TT_Package.GT_STATE_ARMED) } els{ l1 0 == if{ (R:1:@TT_Package.GT_STATE_DOWN) } els{ l1 '%.1f%%' @sprintf } }</FORMAT_VALUE> </Condition> <Condition NotEmpty="OVERRIDE_ANIM_CODE"> <False> <Condition Valid="RETRACT_ARMED_FULL"> <True> <OVERRIDE_ANIM_CODE>(A:SPOILERS ARMED, Bool) if{ #POS_ARM# #ANIM_LENGTH# #STEPS_NUMBER# / * } els{ (B:HANDLING_Spoilers, percent over 100) s0 0 == if{ #POS_DOWN# #STEPS_NUMBER# / } els{ l0 #STEPS_NUMBER# 1 - #STEPS_NUMBER# / * 1 #STEPS_NUMBER# / + #ANIM_LENGTH# * } }</OVERRIDE_ANIM_CODE> </True> <False> <OVERRIDE_ANIM_CODE>(A:SPOILERS ARMED, Bool) if{ 0 } els{ (B:HANDLING_Spoilers, percent over 100) #STEPS_NUMBER# 1 - #STEPS_NUMBER# / * 1 #STEPS_NUMBER# / + #ANIM_LENGTH# * }</OVERRIDE_ANIM_CODE> </False> </Condition> </False> </Condition> <ON_AFTER_INIT_CODE> 0 (A:SPOILERS HANDLE POSITION, percent over 100) #STEPS_NUMBER# 1 - * 1 + (A:SPOILERS ARMED, Bool) ? (>O:Position)</ON_AFTER_INIT_CODE> </True> <False> <GET_TT_VALUE_STATE>(A:SPOILERS HANDLE POSITION, Percent)</GET_TT_VALUE_STATE> <DRAG_VALUE_TO_EVENT_SET>@16k *</DRAG_VALUE_TO_EVENT_SET> <Condition Valid="USE_LOCK"> <True> <FORMAT_VALUE>sp0 (B:HANDLING_Spoilers_Lock, Bool) if{ (R:1:@TT_Package.GT_STATE_LOCKED) } els{ l0 '%.1f%%' @sprintf }</FORMAT_VALUE> </True> <False> <FORMAT_VALUE>'%.1f%%' @sprintf</FORMAT_VALUE> </False> </Condition> </False> </Condition> <ANIM_LAG>#LEVER_ANIM_LAG#</ANIM_LAG> </UseTemplate> <Condition Valid="USE_LOCK"> <UseTemplate Name="ASOBO_HANDLING_Base_Template"> <INTERACTION_TYPE>Switch</INTERACTION_TYPE> <TT_ICON>#TT_ICON_LOCK#</TT_ICON> <IE_NAME>Spoilers_Lock</IE_NAME> <NODE_ID>#LOCK_NODE_ID#</NODE_ID> <ANIM_NAME>#LOCK_ANIM_NAME#</ANIM_NAME> <TOOLTIP_TITLE>#TOOLTIP_SPOILERS_LOCK_TITLETOOLTIP_SPOILERS_LOCK_TITLE#</TOOLTIP_TITLE> <TT_DESCRIPTION_ID>#TT_DESCRIPTION_ID_SPOILERS_LOCK#</TT_DESCRIPTION_ID> <WWISE_EVENT_1>#WWISE_EVENT_LOCK_1#</WWISE_EVENT_1> <WWISE_EVENT_2>#WWISE_EVENT_LOCK_2#</WWISE_EVENT_2> <SIMVAR_TO_WATCH_0>SPOILERS HANDLE POSITION</SIMVAR_TO_WATCH_0> <SET_STATE_EXTERNAL>p0 (A:SPOILERS HANDLE POSITION, percent) 0 == and (>#LOCK_VAR_SCOPE#:#LOCK_VAR_NAME#)</SET_STATE_EXTERNAL> <GET_STATE_EXTERNAL>(A:SPOILERS HANDLE POSITION, percent) 0 > if{ 0 (>#LOCK_VAR_SCOPE#:#LOCK_VAR_NAME#) (#LOCK_VAR_SCOPE#:#LOCK_VAR_NAME#) sp0</GET_STATE_EXTERNAL> <COMP_INIT_CODE>(>B:HANDLING_Spoilers_Lock_On)</COMP_INIT_CODE> <Condition Valid="INVERT_LOCK_ANIM"> <INVERT_ANIM>#INVERT_LOCK_ANIM#</INVERT_ANIM> </Condition> <CHECK_STATE_HAS_CHANGED>True</CHECK_STATE_HAS_CHANGED> </UseTemplate> </Condition> </Case> <Case Value="Switch"> <Switch Param="PUSH_TYPE"> <Case Value="EXTEND_FULL"> <UseTemplate Name="ASOBO_HANDLING_Push_Event_Base_Template"> <IE_NAME>Spoilers_Extend</IE_NAME> <SET_STATE_EXTERNAL>p0 (>O:XMLVAR_Spoilers_Extended) p0 #ADDITIONAL_TESTS# if{ @16k (>K:SPOILERS_SET) }</SET_STATE_EXTERNAL> <GET_STATE_EXTERNAL>(O:XMLVAR_Spoilers_Extended) s0 #ADDITIONAL_TESTS# if{ (A:SPOILERS HANDLE POSITION, Position 16k) @16k != if{ @16k (>K:SPOILERS_SET) } }</GET_STATE_EXTERNAL> <STR_STATE_ON>Extended</STR_STATE_ON> <STR_STATE_OFF>Standby</STR_STATE_OFF> <TT_VALUE_ON>(R:1:@TT_Package.GT_STATE_EXTENDED)</TT_VALUE_ON> <TT_VALUE_OFF>(R:1:@TT_Package.GT_STATE_STANDBY)</TT_VALUE_OFF> <TT_DESCRIPTION_ID>#TT_DESCRIPTION_ID_EXTEND#</TT_DESCRIPTION_ID> <SIMVAR_TO_WATCH_0>SPOILERS HANDLE POSITION</SIMVAR_TO_WATCH_0> </UseTemplate> </Case> </Switch> <UseTemplate Name="ASOBO_HANDLING_Base_Template"> <IE_NAME>Spoilers</IE_NAME> <NUM_STATES>3</NUM_STATES> <COMP_UPDATE_CODE> (B:HANDLING_Spoilers) #POS_STANDBY# != #ADDITIONAL_TESTS# if{ #INCREMENT# -#INCREMENT# (B:HANDLING_Spoilers) #POS_INC# == ? (A:SPOILERS HANDLE POSITION, Position 16k) + @16k min 0 max (>K:SPOILERS_SET) } </COMP_UPDATE_CODE> <FREQUENCY>#REPEAT_FREQUENCY#</FREQUENCY> <Switch Param="PUSH_TYPE"> <Case Value="EXTEND_FULL"> <IE_ID_EXTERNAL_0>Spoilers_Extend</IE_ID_EXTERNAL_0> <ON_PRIMARY_EVENT>(B:HANDLING_Spoilers) #POS_STANDBY# == if{ (>B:HANDLING_Spoilers_Extend_Toggle) }</ON_PRIMARY_EVENT> <ANIM_CODE_PUSH>(B:HANDLING_Spoilers_Extend, Bool) 100 *</ANIM_CODE_PUSH> <OVERRIDE_ANIM_CODE>(B:HANDLING_Spoilers) 100 *</OVERRIDE_ANIM_CODE> <ON_STATE_CHANGED_EXTERNAL_CODE>(O:HANDLING_Spoilers_Position) #POS_STANDBY# != (B:HANDLING_Spoilers_Extend, Bool) and if{ #POS_STANDBY# (>O:HANDLING_Spoilers_Position) }</ON_STATE_CHANGED_EXTERNAL_CODE> <WWISE_PUSH_EVENT_1>spoilers_switch_push_on</WWISE_PUSH_EVENT_1> <WWISE_PUSH_EVENT_2>spoilers_switch_push_off</WWISE_PUSH_EVENT_2> </Case> </Switch> <SET_STATE_#POS_INC#>#STATE_INC# (>O:XMLVAR_Spoilers_Switch_Mode)</SET_STATE_#POS_INC#> <SET_STATE_#POS_STANDBY#>#STATE_STANDBY# (>O:XMLVAR_Spoilers_Switch_Mode)</SET_STATE_#POS_STANDBY#> <SET_STATE_#POS_DEC#>#STATE_DEC# (>O:XMLVAR_Spoilers_Switch_Mode)</SET_STATE_#POS_DEC#> <TT_VALUE>(A:SPOILERS HANDLE POSITION, percent) '%d%%' @sprintf</TT_VALUE> <TT_VALUE_IS_DYNAMIC>True</TT_VALUE_IS_DYNAMIC> <STR_STATE_#POS_INC#>Deploy</STR_STATE_#POS_INC#> <STR_STATE_#POS_STANDBY#>Standby</STR_STATE_#POS_STANDBY#> <STR_STATE_#POS_DEC#>Retract</STR_STATE_#POS_DEC#> <GET_STATE_EXTERNAL>(O:XMLVAR_Spoilers_Switch_Mode) sp0</GET_STATE_EXTERNAL> <ENUM_VAL_TO_POS_EXTERNAL>#POS_STANDBY# sp1 l0 #STATE_STANDBY# == if{ #POS_STANDBY# sp1 g1 } l0 #STATE_INC# == if{ #POS_INC# sp1 g1 } l0 #STATE_DEC# == if{ #POS_DEC# sp1 g1 } :1 l1 </ENUM_VAL_TO_POS_EXTERNAL> </UseTemplate> </Case> </Switch> </Template>Parameters initialization:
-
Default
Parameters set:
- ANIM_NAME (using INTERACTION_TYPE)
- NODE_ID (using INTERACTION_TYPE)
- PART_ID (using INTERACTION_TYPE)
- WWISE_PREFIX
- RETRACT_ARMED_FULL
- POS_DOWN
- POS_ARM
- TT_DESCRIPTION_ID
- TT_DESCRIPTION_ID_EXTEND
- TOOLTIP_TITLE
Condition: Switch(INTERACTION_TYPE)
-
Case: Lever
Parameters set:
- DRAG_AXIS_SCALE
- DRAG_SPEED
- WWISE_EVENT
- MIN_VALUE
- MAX_VALUE
- LEVER_ANIM_LAG
Condition: Valid(USE_LOCK)
-
Case: True
Parameters set:
- TT_ICON_LOCK
- WWISE_EVENT_LOCK_1
- WWISE_EVENT_LOCK_2
- LOCK_NODE_ID
- LOCK_ANIM_NAME
- LOCK_VAR_SCOPE
- LOCK_VAR_NAME
- TOOLTIP_SPOILERS_LOCK_TITLE
- TT_DESCRIPTION_ID_SPOILERS_LOCK
Condition: Switch(TYPE)
-
Case: AIRLINER
Parameters set:
- ANIM_TRIGGER_COUNT
- STEPS_NUMBER
- USE_GATES
- ANIM_LENGTH
Condition: Valid(PHYSICAL_AUTOSPOILER)
-
Case: True
Parameters set:
- ARMED_STATE_TEST
-
Case: False
Parameters set:
- ARMED_STATE_TEST
-
Case: Switch
Parameters set:
- TIME_TO_FULL_RANGE_SEC
- REPEAT_FREQUENCY
- MOMENTARY_TIMER
- POS_DEC
- POS_STANDBY
- POS_INC
- ADDITIONAL_TESTS
Condition: Switch(PUSH_TYPE)
-
Case: EXTEND_FULL
Parameters set:
- ANIM_NAME_PUSH (using INTERACTION_TYPE)
- INVERT_ANIM_PUSH
-
Override
Condition: Switch(INTERACTION_TYPE)
-
Case: Switch
Parameters set:
- INCREMENT (using TIME_TO_FULL_RANGE_SEC, REPEAT_FREQUENCY)
- MOMENTARY_SWITCH
- STATE0_TIMER (using MOMENTARY_TIMER)
- STATE_MAX_TIMER (using MOMENTARY_TIMER)
- STATE_STANDBY
- STATE_INC
- STATE_DEC
Condition: Switch(PUSH_TYPE)
-
Case: EXTEND_FULL
Parameters set:
- ADDITIONAL_TESTS (using ADDITIONAL_TESTS)
-
Condition: Switch(INTERACTION_TYPE)
-
Case: Lever
Templates used:
-
ASOBO_HANDLING_Base_Template
Parameters set:
- IE_NAME
- GATE_DIRECTION
- DONT_SYNC_DRAG_TO_ANIM
- DRAG_ANIM_NAME (using ANIM_NAME)
- DRAG_NODE_ID (using NODE_ID)
- GET_TT_VALUE_STATE
- FORMAT_VALUE
- SIMVAR_TO_WATCH_0
- GET_STATE_EXTERNAL
- SET_STATE_EXTERNAL
- STATE_TO_POS_EXTERNAL
- INC_PARAM_0
- DEC_PARAM_0
- ANIM_LAG (using LEVER_ANIM_LAG)
Condition: Valid(USE_LOCK)
-
Case: True
Parameters set:
- ON_BEFORE_SET_CODE
Condition: Valid(USE_GATES)
-
Case: True
Parameters set:
- TEMPLATE_TO_USE
- DRAG_CODE (using STEPS_NUMBER)
- ON_AFTER_INIT_CODE (using STEPS_NUMBER)
Condition: Valid(RETRACT_ARMED_FULL)
-
Case: True
Parameters set:
- FORMAT_VALUE
Condition: NotEmpty(OVERRIDE_ANIM_CODE)
-
Case: False
Condition: Valid(RETRACT_ARMED_FULL)
-
Case: True
Parameters set:
- OVERRIDE_ANIM_CODE (using POS_ARM, ANIM_LENGTH, STEPS_NUMBER, POS_DOWN)
-
Case: False
Parameters set:
- OVERRIDE_ANIM_CODE (using STEPS_NUMBER, ANIM_LENGTH)
-
-
Case: False
Parameters set:
- GET_TT_VALUE_STATE
- DRAG_VALUE_TO_EVENT_SET
Condition: Valid(USE_LOCK)
-
Case: True
Parameters set:
- FORMAT_VALUE
-
Case: False
Parameters set:
- FORMAT_VALUE
Condition: Valid(USE_GATES)
-
Case: True
Condition: Valid(RETRACT_ARMED_FULL)
-
Case: True
Templates used:
-
ASOBO_HANDLING_Push_Event_Base_Template
Parameters set:
- IE_NAME
- SET_STATE_EXTERNAL
- GET_STATE_EXTERNAL
- STR_STATE_ON
- STR_STATE_OFF
- TT_VALUE_ON
- TT_VALUE_OFF
- SIMVAR_TO_WATCH_0
- SIMVAR_TO_WATCH_1
-
ASOBO_HANDLING_Push_Event_Base_Template
-
Case: False
Templates used:
-
ASOBO_HANDLING_Push_Event_Base_Template
Parameters set:
- IE_NAME
- SET_STATE_EXTERNAL
- GET_STATE_EXTERNAL
- STR_STATE_ON
- STR_STATE_OFF
- TT_VALUE_ON
- TT_VALUE_OFF
- SIMVAR_TO_WATCH_0
- SIMVAR_TO_WATCH_1
-
ASOBO_HANDLING_Push_Event_Base_Template
-
Condition: Valid(USE_LOCK)
-
Case: True
Templates used:
-
ASOBO_HANDLING_Base_Template
Parameters set:
- INTERACTION_TYPE
- TT_ICON (using TT_ICON_LOCK)
- IE_NAME
- NODE_ID (using LOCK_NODE_ID)
- ANIM_NAME (using LOCK_ANIM_NAME)
- TOOLTIP_TITLE (using TOOLTIP_SPOILERS_LOCK_TITLETOOLTIP_SPOILERS_LOCK_TITLE)
- TT_DESCRIPTION_ID (using TT_DESCRIPTION_ID_SPOILERS_LOCK)
- WWISE_EVENT_1 (using WWISE_EVENT_LOCK_1)
- WWISE_EVENT_2 (using WWISE_EVENT_LOCK_2)
- SIMVAR_TO_WATCH_0
- SET_STATE_EXTERNAL (using LOCK_VAR_SCOPE, LOCK_VAR_NAME)
- GET_STATE_EXTERNAL (using LOCK_VAR_SCOPE, LOCK_VAR_NAME)
- COMP_INIT_CODE
- CHECK_STATE_HAS_CHANGED
Condition: Valid(INVERT_LOCK_ANIM)
-
Case: True
Parameters set:
- INVERT_ANIM (using INVERT_LOCK_ANIM)
-
ASOBO_HANDLING_Base_Template
-
ASOBO_HANDLING_Base_Template
-
Case: Switch
Templates used:
-
ASOBO_HANDLING_Base_Template
Parameters set:
- IE_NAME
- NUM_STATES
- COMP_UPDATE_CODE (using POS_STANDBY, ADDITIONAL_TESTS, INCREMENT, POS_INC)
- FREQUENCY (using REPEAT_FREQUENCY)
- SET_STATE_#POS_INC# (using STATE_INC)
- SET_STATE_#POS_STANDBY# (using STATE_STANDBY)
- SET_STATE_#POS_DEC# (using STATE_DEC)
- TT_VALUE
- TT_VALUE_IS_DYNAMIC
- STR_STATE_#POS_INC#
- STR_STATE_#POS_STANDBY#
- STR_STATE_#POS_DEC#
- GET_STATE_EXTERNAL
- ENUM_VAL_TO_POS_EXTERNAL (using POS_STANDBY, STATE_STANDBY, STATE_INC, POS_INC, STATE_DEC, POS_DEC)
Condition: Switch(PUSH_TYPE)
-
Case: EXTEND_FULL
Parameters set:
- IE_ID_EXTERNAL_0
- ON_PRIMARY_EVENT (using POS_STANDBY)
- ANIM_CODE_PUSH
- OVERRIDE_ANIM_CODE
- ON_STATE_CHANGED_EXTERNAL_CODE (using POS_STANDBY)
- WWISE_PUSH_EVENT_1
- WWISE_PUSH_EVENT_2
Condition: Switch(PUSH_TYPE)
-
Case: EXTEND_FULL
Templates used:
-
ASOBO_HANDLING_Push_Event_Base_Template
Parameters set:
- IE_NAME
- SET_STATE_EXTERNAL (using ADDITIONAL_TESTS)
- GET_STATE_EXTERNAL (using ADDITIONAL_TESTS)
- STR_STATE_ON
- STR_STATE_OFF
- TT_VALUE_ON
- TT_VALUE_OFF
- TT_DESCRIPTION_ID (using TT_DESCRIPTION_ID_EXTEND)
- SIMVAR_TO_WATCH_0
-
ASOBO_HANDLING_Push_Event_Base_Template
-
ASOBO_HANDLING_Base_Template
-
Default
-
ASOBO_HANDLING_Flaps_SubTemplate
Definition from XML<Template Name="ASOBO_HANDLING_Flaps_SubTemplate"> <Switch Param="INTERACTION_TYPE"> <Case Value="Lever"> <UseTemplate Name="ASOBO_HANDLING_Flaps_Lever_SubTemplate"/> </Case> <Case Value="Push"> <UseTemplate Name="ASOBO_HANDLING_Flaps_Button_SubTemplate"/> </Case> </Switch> </Template>Condition: Switch(INTERACTION_TYPE)
-
Case: Lever
Templates used:
-
Case: Push
Templates used:
-
-
ASOBO_HANDLING_Flaps_Lever_SubTemplate
Definition from XML<Template Name="ASOBO_HANDLING_Flaps_Lever_SubTemplate"> <Parameters Type="Default"> <Condition Valid="HAS_BUTTON"> <True> <ANIM_NAME_LEVER>HANDLING_Lever_Flaps</ANIM_NAME_LEVER> <ANIM_NAME_BUTTON>HANDLING_Lever_Button_Flaps</ANIM_NAME_BUTTON> <NODE_ID>HANDLING_Lever_Flaps</NODE_ID> <PART_ID>HANDLING_Lever_Flaps</PART_ID> <ANIM_TRIGGER_COUNT>1</ANIM_TRIGGER_COUNT> <ANIM_SPEED>5</ANIM_SPEED> <DRAG_DELTA>0.1</DRAG_DELTA> <ANIMREF_ID>1</ANIMREF_ID> <AXIS>Y</AXIS> <MAX_HANDLE_INDEX>(A:FLAPS NUM HANDLE POSITIONS:1, Number)</MAX_HANDLE_INDEX> <MIN_DELTA>0.25</MIN_DELTA> <DONT_SYNC_DRAG_TO_ANIM/> <DONT_CREATE_SOUND_ANIM_TRIGGERS/> </True> <False> <ANIM_NAME>HANDLING_Lever_Flaps</ANIM_NAME> <NODE_ID>HANDLING_Lever_Flaps</NODE_ID> <PART_ID>HANDLING_Lever_Flaps</PART_ID> <ANIM_TRIGGER_COUNT>2</ANIM_TRIGGER_COUNT> <MIN_DELTA>0.25</MIN_DELTA> <MAX_HANDLE_INDEX>2</MAX_HANDLE_INDEX> <ANIM_LAG>400</ANIM_LAG> <HELPID>HELPID_GAUGE_FLAPS_SWITCH</HELPID> <ANIMREF_ID>0</ANIMREF_ID> </False> </Condition> <ANIMTIP_0_ON_PERCENT>0</ANIMTIP_0_ON_PERCENT> <ANIMTIP_1_ON_PERCENT>0.5</ANIMTIP_1_ON_PERCENT> <ANIMTIP_2_ON_PERCENT>1</ANIMTIP_2_ON_PERCENT> <ANIMTIP_0>TT:COCKPIT.TOOLTIPS.FLAPS_LEVER_UP</ANIMTIP_0> <ANIMTIP_1>TT:COCKPIT.TOOLTIPS.FLAPS_LEVER_TO</ANIMTIP_1> <ANIMTIP_2>TT:COCKPIT.TOOLTIPS.FLAPS_LEVER_LDG</ANIMTIP_2> <TOOLTIP_FLAPS_TITLE>@TT_Package.HANDLING_LEVER_FLAPS_TITLE</TOOLTIP_FLAPS_TITLE> </Parameters> <Parameters Type="Override"> <TOOLTIP_TITLE>#TOOLTIP_FLAPS_TITLE#</TOOLTIP_TITLE> <TOOLTIP_ENTRY_0>HANDLING_Flaps</TOOLTIP_ENTRY_0> <ANIM_CODE>(B:HANDLING_Flaps)</ANIM_CODE> <STEP_INCREMENT Process="Int">16384 (A:FLAPS NUM HANDLE POSITIONS, Number) /</STEP_INCREMENT> <Condition Valid="HAS_BUTTON"> <False> <ANIM_NAME_LEVER>#ANIM_NAME#</ANIM_NAME_LEVER> </False> </Condition> </Parameters> <Parameters Type="Override"> <Condition Valid="INVERT_INTERACTION"> <True> <DRAG_POSITION>1 (M:DragPercent) - 16384 *</DRAG_POSITION> <INVERT_ANIM>True</INVERT_ANIM> </True> <False> <DRAG_POSITION>(M:DragPercent) 16384 *</DRAG_POSITION> </False> </Condition> </Parameters> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <Condition Valid="HAS_BUTTON"> <UseTemplate Name="ASOBO_GT_Anim_Code"> <ANIM_NAME>#ANIM_NAME_BUTTON#</ANIM_NAME> <ANIM_CODE> (O:XMLVAR_Interacting_With_Lever) 100 * </ANIM_CODE> <Condition Check="BUTTON_ANIM_LAG"> <ANIM_LAG>#BUTTON_ANIM_LAG#</ANIM_LAG> </Condition> <ANIM_LENGTH>100</ANIM_LENGTH> </UseTemplate> </Condition> <UseInputEvent ID="HANDLING"> <FLAPS_ID>1</FLAPS_ID> </UseInputEvent> <Condition Check="USE_TRAJECTORY_DRAG_MODE"> <True> <UseTemplate Name="ASOBO_GT_Lever_DraggingWheelLeftDrag_Axis"> <ANIM_NAME>#ANIM_NAME_LEVER#</ANIM_NAME> <DRAG_ANIM_NAME>#ANIM_NAME_LEVER#</DRAG_ANIM_NAME> <Condition Valid="HAS_BUTTON"> <LOCK_CODE>1 (>O:XMLVAR_Interacting_With_Lever)</LOCK_CODE> <UNLOCK_CODE>0 (>O:XMLVAR_Interacting_With_Lever)</UNLOCK_CODE> </Condition> <DONT_SYNC_DRAG_TO_ANIM/> <NO_ARROWS/> <CURSOR>Hand</CURSOR> <HELPID>HELPID_GAUGE_FLAPS_SWITCH</HELPID> <TOOLTIPID>TOOLTIPTEXT_FLAPS_SWITCH</TOOLTIPID> <DRAG_SIMVAR>FLAPS HANDLE PERCENT</DRAG_SIMVAR> <DRAG_CODE>#DRAG_POSITION# (>B:HANDLING_Flaps_Set)</DRAG_CODE> <POSITIVE_AXIS_CODE>#STEP_INCREMENT# (>B:HANDLING_Flaps_Inc)</POSITIVE_AXIS_CODE> <NEGATIVE_AXIS_CODE>#STEP_INCREMENT# (>B:HANDLING_Flaps_Dec)</NEGATIVE_AXIS_CODE> </UseTemplate> </True> <False> <UseTemplate Name="ASOBO_GT_Lever_DraggingYAxis_Code"> <ANIM_NAME>#ANIM_NAME_LEVER#</ANIM_NAME> <Condition Valid="HAS_BUTTON"> <LEFT_SINGLE_CODE>1 (>O:XMLVAR_Interacting_With_Lever)</LEFT_SINGLE_CODE> <LEFT_RELEASE_CODE>0 (>O:XMLVAR_Interacting_With_Lever)</LEFT_RELEASE_CODE> </Condition> <ANIM_LENGTH>100</ANIM_LENGTH> <UP_CODE>#STEP_INCREMENT# (>B:HANDLING_Flaps_Dec)</UP_CODE> <DOWN_CODE>#STEP_INCREMENT# (>B:HANDLING_Flaps_Inc)</DOWN_CODE> <DRAG_DELTA>0.05</DRAG_DELTA> <DRAG_SPEED>0.5</DRAG_SPEED> <IS_LOOPING/> </UseTemplate> </False> </Condition> <UseTemplate Name="ASOBO_GT_AnimTriggers_SoundEvents_Same"> <WWISE_EVENT>lever_flaps</WWISE_EVENT> <COUNT>#ANIM_TRIGGER_COUNT#</COUNT> <ANIM_NAME>#ANIM_NAME_LEVER#</ANIM_NAME> </UseTemplate> <Condition Valid="HAS_BUTTON"> <UseTemplate Name="ASOBO_GT_AnimTriggers_2SoundEvents"> <ANIM_NAME>#ANIM_NAME_BUTTON#</ANIM_NAME> <WWISE_EVENT_1>flaps_lever_button_on</WWISE_EVENT_1> <NORMALIZED_TIME_1>0.1</NORMALIZED_TIME_1> <DIRECTION_1>Forward</DIRECTION_1> <WWISE_EVENT_2>flaps_lever_button_off</WWISE_EVENT_2> <NORMALIZED_TIME_2>0.9</NORMALIZED_TIME_2> <DIRECTION_2>Backward</DIRECTION_2> </UseTemplate> <UseTemplate Name="ASOBO_GT_Visibility_Code"> <VISIBILITY_CODE>(L:XMLVAR_LeverFlapsHidden) !</VISIBILITY_CODE> </UseTemplate> </Condition> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- ANIMTIP_0_ON_PERCENT
- ANIMTIP_1_ON_PERCENT
- ANIMTIP_2_ON_PERCENT
- ANIMTIP_0
- ANIMTIP_1
- ANIMTIP_2
- TOOLTIP_FLAPS_TITLE
Condition: Valid(HAS_BUTTON)
-
Case: True
Parameters set:
- ANIM_NAME_LEVER
- ANIM_NAME_BUTTON
- NODE_ID
- PART_ID
- ANIM_TRIGGER_COUNT
- ANIM_SPEED
- DRAG_DELTA
- ANIMREF_ID
- AXIS
- MAX_HANDLE_INDEX
- MIN_DELTA
- DONT_SYNC_DRAG_TO_ANIM
- DONT_CREATE_SOUND_ANIM_TRIGGERS
-
Case: False
Parameters set:
- ANIM_NAME
- NODE_ID
- PART_ID
- ANIM_TRIGGER_COUNT
- MIN_DELTA
- MAX_HANDLE_INDEX
- ANIM_LAG
- HELPID
- ANIMREF_ID
-
Override
Parameters set:
- TOOLTIP_TITLE (using TOOLTIP_FLAPS_TITLE)
- TOOLTIP_ENTRY_0
- ANIM_CODE
- STEP_INCREMENT
Condition: Valid(HAS_BUTTON)
-
Case: False
Parameters set:
- ANIM_NAME_LEVER (using ANIM_NAME)
-
Override
Condition: Valid(INVERT_INTERACTION)
-
Case: True
Parameters set:
- DRAG_POSITION
- INVERT_ANIM
-
Case: False
Parameters set:
- DRAG_POSITION
-
Parameters read:
- NODE_ID
Components:
-
#NODE_ID# (Node: #NODE_ID#)
Parameters set:
- FLAPS_ID
Templates used:
-
ASOBO_GT_AnimTriggers_SoundEvents_Same
Parameters set:
- WWISE_EVENT
- COUNT (using ANIM_TRIGGER_COUNT)
- ANIM_NAME (using ANIM_NAME_LEVER)
Condition: Valid(HAS_BUTTON)
-
Case: True
Templates used:
-
ASOBO_GT_Anim_Code
Parameters set:
- ANIM_NAME (using ANIM_NAME_BUTTON)
- ANIM_CODE
- ANIM_LENGTH
Condition: Check(BUTTON_ANIM_LAG)
-
Case: True
Parameters set:
- ANIM_LAG (using BUTTON_ANIM_LAG)
-
ASOBO_GT_Anim_Code
Condition: Check(USE_TRAJECTORY_DRAG_MODE)
-
Case: True
Templates used:
-
ASOBO_GT_Lever_DraggingWheelLeftDrag_Axis
Parameters set:
- ANIM_NAME (using ANIM_NAME_LEVER)
- DRAG_ANIM_NAME (using ANIM_NAME_LEVER)
- DONT_SYNC_DRAG_TO_ANIM
- NO_ARROWS
- CURSOR
- HELPID
- TOOLTIPID
- DRAG_SIMVAR
- DRAG_CODE (using DRAG_POSITION)
- POSITIVE_AXIS_CODE (using STEP_INCREMENT)
- NEGATIVE_AXIS_CODE (using STEP_INCREMENT)
Condition: Valid(HAS_BUTTON)
-
Case: True
Parameters set:
- LOCK_CODE
- UNLOCK_CODE
-
ASOBO_GT_Lever_DraggingWheelLeftDrag_Axis
-
Case: False
Templates used:
-
ASOBO_GT_Lever_DraggingYAxis_Code
Parameters set:
- ANIM_NAME (using ANIM_NAME_LEVER)
- ANIM_LENGTH
- UP_CODE (using STEP_INCREMENT)
- DOWN_CODE (using STEP_INCREMENT)
- DRAG_DELTA
- DRAG_SPEED
- IS_LOOPING
Condition: Valid(HAS_BUTTON)
-
Case: True
Parameters set:
- LEFT_SINGLE_CODE
- LEFT_RELEASE_CODE
-
ASOBO_GT_Lever_DraggingYAxis_Code
Condition: Valid(HAS_BUTTON)
-
Case: True
Templates used:
-
ASOBO_GT_AnimTriggers_2SoundEvents
Parameters set:
- ANIM_NAME (using ANIM_NAME_BUTTON)
- WWISE_EVENT_1
- NORMALIZED_TIME_1
- DIRECTION_1
- WWISE_EVENT_2
- NORMALIZED_TIME_2
- DIRECTION_2
-
ASOBO_GT_Visibility_Code
Parameters set:
- VISIBILITY_CODE
-
ASOBO_GT_AnimTriggers_2SoundEvents
-
Default
-
ASOBO_HANDLING_Flaps_Button_SubTemplate
Definition from XML<Template Name="ASOBO_HANDLING_Flaps_Button_SubTemplate"> <Parameters Type="Default"> <ANIM_NAME>HANDLING_Button_Flaps</ANIM_NAME> <NODE_ID>HANDLING_Button_Flaps</NODE_ID> <PART_ID>HANDLING_Button_Flaps</PART_ID> <MAX_FLAPS_DEGREE>45</MAX_FLAPS_DEGREE> <SELECTED_FLAPS_DEGREE>0</SELECTED_FLAPS_DEGREE> <WWISE_PREFIX>flaps</WWISE_PREFIX> </Parameters> <Parameters Type="Default"> <TOOLTIP_TITLE>@TT_Package.HANDLING_BUTTON_FLAPS_TITLE</TOOLTIP_TITLE> <TT_DESCRIPTION_ID>@TT_Package.HANDLING_BUTTON_FLAPS_ACTION</TT_DESCRIPTION_ID> <TT_DESCRIPTION_INDEX>#SELECTED_FLAPS_DEGREE#</TT_DESCRIPTION_INDEX> </Parameters> <UseInputEvent ID="HANDLING"> <FLAPS_ID>1</FLAPS_ID> </UseInputEvent> <UseTemplate Name="ASOBO_HANDLING_Base_Template"> <IE_NAME>Flaps_Select_#SELECTED_FLAPS_DEGREE#_Degrees</IE_NAME> <INTERACTION_TYPE>Push</INTERACTION_TYPE> <SET_STATE_EXTERNAL>16384 #SELECTED_FLAPS_DEGREE# * #MAX_FLAPS_DEGREE# / (>B:HANDLING_Flaps_Set)</SET_STATE_EXTERNAL> <TT_VALUE>(A:TRAILING EDGE FLAPS LEFT ANGLE, degree) '%d°' @sprintf</TT_VALUE> <TT_VALUE_IS_DYNAMIC>True</TT_VALUE_IS_DYNAMIC> </UseTemplate> </Template>Parameters initialization:
-
Default
Parameters set:
- ANIM_NAME
- NODE_ID
- PART_ID
- MAX_FLAPS_DEGREE
- SELECTED_FLAPS_DEGREE
- WWISE_PREFIX
-
Default
Parameters set:
- TOOLTIP_TITLE
- TT_DESCRIPTION_ID
- TT_DESCRIPTION_INDEX (using SELECTED_FLAPS_DEGREE)
Parameters set:
- FLAPS_ID
Templates used:
-
ASOBO_HANDLING_Base_Template
Parameters set:
- IE_NAME (using SELECTED_FLAPS_DEGREE)
- INTERACTION_TYPE
- SET_STATE_EXTERNAL (using SELECTED_FLAPS_DEGREE, MAX_FLAPS_DEGREE)
- TT_VALUE
- TT_VALUE_IS_DYNAMIC
-
Default
-
ASOBO_HANDLING_Autobrakes_SubTemplate
Definition from XML<Template Name="ASOBO_HANDLING_Autobrakes_SubTemplate"> <Parameters Type="Default"> <NODE_ID>HANDLING_#INTERACTION_TYPE#_Autobrake_#ID#</NODE_ID> <ANIM_NAME>HANDLING_#INTERACTION_TYPE#_Autobrake_#ID#</ANIM_NAME> <PART_ID>HANDLING_#INTERACTION_TYPE#_Autobrake</PART_ID> <Switch Param="INTERACTION_TYPE"> <Case Value="Push"> <TYPE>ON_OFF</TYPE> <WWISE_PREFIX>autobrake</WWISE_PREFIX> <AUTOBRAKE_LEVEL Process="Int">#ID# 1 +</AUTOBRAKE_LEVEL> <AUTOBRAKE_RTO>0</AUTOBRAKE_RTO> <AUTOBRAKE_OFF>1</AUTOBRAKE_OFF> <Switch Param="ID"> <Case Value="1"> <TT_DESCRIPTION_ID>@TT_Package.LANDING_GEAR_PUSH_AUTOBKR_ACTION_LOW</TT_DESCRIPTION_ID> </Case> <Case Value="2"> <TT_DESCRIPTION_ID>@TT_Package.LANDING_GEAR_PUSH_AUTOBKR_ACTION_MED</TT_DESCRIPTION_ID> </Case> <Case Value="3"> <TT_DESCRIPTION_ID>@TT_Package.LANDING_GEAR_PUSH_AUTOBKR_ACTION_MAX</TT_DESCRIPTION_ID> </Case> </Switch> <IS_AIRLINER>True</IS_AIRLINER> <AUTODISABLE_COUNTDOWN>3</AUTODISABLE_COUNTDOWN> <Condition Valid="DISABLED_IN_FLIGHT"> <True> <TEST_DISABLED>(A:SIM ON GROUND, Bool) !</TEST_DISABLED> </True> <False> <TEST_DISABLED>0</TEST_DISABLED> </False> </Condition> </Case> <Case Value="Knob"> <TYPE>X_STATES</TYPE> <WWISE_PREFIX>autobrakes</WWISE_PREFIX> <TT_DESCRIPTION_ID>@TT_Package.LANDING_GEAR_KNOB_ALT_AUTOBRAKE_ACTION</TT_DESCRIPTION_ID> <Switch Param="AIRLINER_TYPE"> <Case Value="BOEING"> <POS_RTO>0</POS_RTO> <POS_OFF>1</POS_OFF> <POS_DISARM>2</POS_DISARM> <POS_1>3</POS_1> <POS_2>4</POS_2> <POS_3>5</POS_3> <POS_4>6</POS_4> <POS_MAX_AUTO>7</POS_MAX_AUTO> <NUM_STATES>8</NUM_STATES> </Case> </Switch> </Case> </Switch> <TOOLTIP_TITLE>@TT_Package.LANDING_GEAR_PUSH_AUTOBKR_TITLE</TOOLTIP_TITLE> </Parameters> <Parameters Type="Override"> <Switch Param="TYPE"> <Case Value="ON_OFF"> <SET_SIMVAR_FROM_POSITION> (* SwimVar pos is handled there for interactions + in update for automatic state switches *) -1 sp0 (A:SIM ON GROUND, Bool) if{ (L:XMLVAR_Autobrake_Level_Armed) #AUTOBRAKE_OFF# == if{ #AUTOBRAKE_OFF# sp0 } els{ #AUTOBRAKE_RTO# sp0 } } els{ (L:XMLVAR_Autobrake_Level_Armed) sp0 } l0 -1 != l0 (A:AUTO BRAKE SWITCH CB, Enum) != and if{ l0 (>K:SET_AUTOBRAKE_CONTROL) } </SET_SIMVAR_FROM_POSITION> </Case> </Switch> </Parameters> <Parameters Type="Override"> <Switch Param="TYPE"> <Case Value="ON_OFF"> <LOCAL_VAR_TO_WATCH_0>XMLVAR_Autobrake_Level_Armed</LOCAL_VAR_TO_WATCH_0> <SIMVAR_TO_WATCH_0>ANTISKID BRAKES ACTIVE</SIMVAR_TO_WATCH_0> <SIMVAR_TO_WATCH_1>BRAKE LEFT POSITION EX1</SIMVAR_TO_WATCH_1> <SIMVAR_TO_WATCH_2>BRAKE RIGHT POSITION EX1</SIMVAR_TO_WATCH_2> <SET_STATE_EXTERNAL> #TEST_DISABLED# if{ 0 (>O:HANDLING_Autobrake_Level_#ID#_Position) } els{ p0 if{ #AUTOBRAKE_LEVEL# (>L:XMLVAR_Autobrake_Level_Armed) } els{ (L:XMLVAR_Autobrake_Level_Armed) #AUTOBRAKE_LEVEL# == if{ #AUTOBRAKE_OFF# (>L:XMLVAR_Autobrake_Level_Armed) } } } #SET_SIMVAR_FROM_POSITION# </SET_STATE_EXTERNAL> <GET_STATE_EXTERNAL> (L:XMLVAR_Autobrake_Level_Armed) #AUTOBRAKE_LEVEL# == sp0 (A:ANTISKID BRAKES ACTIVE, Bool) (A:BRAKE LEFT POSITION EX1, percent) 95 > (A:BRAKE RIGHT POSITION EX1, percent) 95 > or ! and sp1 l0 l1 ! and if{ #AUTOBRAKE_OFF# (>L:XMLVAR_Autobrake_Level_Armed) } l0 l1 and sp0 </GET_STATE_EXTERNAL> <Condition Check="ID" Match="1"> <COMP_INIT_CODE>(A:AUTO BRAKE SWITCH CB, Enum) (>L:XMLVAR_Autobrake_Level_Armed) (A:GEAR HANDLE POSITION, Bool) (>O:_Gear_Position) #SET_SIMVAR_FROM_POSITION#</COMP_INIT_CODE> <COMP_UPDATE_CODE> (* Handle disarming after landing gear up *) (O:_Countdown_Disable_Autobrake) 0 > if{ (O:_Countdown_Disable_Autobrake) 1 - (>O:_Countdown_Disable_Autobrake) (O:_Countdown_Disable_Autobrake) 0 <= if{ 1 (>K:SET_AUTOBRAKE_CONTROL) #AUTOBRAKE_OFF# (>L:XMLVAR_Autobrake_Level_Armed) } } (L:XMLVAR_Autobrake_Level_Armed) #AUTOBRAKE_OFF# > if{ (A:GEAR HANDLE POSITION, Bool) s0 (O:_Gear_Position) != sp1 l0 (>O:_Gear_Position) l1 l0 ! and if{ #AUTODISABLE_COUNTDOWN# (>O:_Countdown_Disable_Autobrake) } } </COMP_UPDATE_CODE> </Condition> <Condition Valid="IS_AIRLINER"> <SEQ1_EMISSIVE_CODE>(B:HANDLING_Autobrake_Level_#ID#, Bool) (A:AUTOBRAKES ACTIVE, Bool) (A:REJECTED TAKEOFF BRAKES ACTIVE, Bool) or and</SEQ1_EMISSIVE_CODE> <SEQ2_EMISSIVE_CODE>(B:HANDLING_Autobrake_Level_#ID#, Bool)</SEQ2_EMISSIVE_CODE> </Condition> </Case> <Case Value="X_STATES"> <KNOB_TYPE>X_STATES</KNOB_TYPE> <SIMVAR_TO_WATCH_0>AUTO BRAKE SWITCH CB</SIMVAR_TO_WATCH_0> <Switch Param="AIRLINER_TYPE"> <Case Value="BOEING"> <STR_STATE_#POS_RTO#>RTO</STR_STATE_#POS_RTO#> <STR_STATE_#POS_OFF#>Off</STR_STATE_#POS_OFF#> <STR_STATE_#POS_DISARM#>Disarm</STR_STATE_#POS_DISARM#> <STR_STATE_#POS_1#>Level_1</STR_STATE_#POS_1#> <STR_STATE_#POS_2#>Level_2</STR_STATE_#POS_2#> <STR_STATE_#POS_3#>Level_3</STR_STATE_#POS_3#> <STR_STATE_#POS_4#>Level_4</STR_STATE_#POS_4#> <STR_STATE_#POS_MAX_AUTO#>Max_Auto</STR_STATE_#POS_MAX_AUTO#> <TT_VALUE_#POS_RTO#>@TT_Package.GT_STATE_RTO</TT_VALUE_#POS_RTO#> <TT_VALUE_#POS_OFF#>@TT_Package.GT_STATE_OFF</TT_VALUE_#POS_OFF#> <TT_VALUE_#POS_DISARM#>@TT_Package.GT_STATE_DISARM</TT_VALUE_#POS_DISARM#> <TT_VALUE_#POS_1#>'1'</TT_VALUE_#POS_1#> <TT_VALUE_#POS_1#_IS_DYNAMIC>True</TT_VALUE_#POS_1#_IS_DYNAMIC> <TT_VALUE_#POS_2#>'2'</TT_VALUE_#POS_2#> <TT_VALUE_#POS_2#_IS_DYNAMIC>True</TT_VALUE_#POS_2#_IS_DYNAMIC> <TT_VALUE_#POS_3#>'3'</TT_VALUE_#POS_3#> <TT_VALUE_#POS_3#_IS_DYNAMIC>True</TT_VALUE_#POS_3#_IS_DYNAMIC> <TT_VALUE_#POS_4#>'4'</TT_VALUE_#POS_4#> <TT_VALUE_#POS_4#_IS_DYNAMIC>True</TT_VALUE_#POS_4#_IS_DYNAMIC> <TT_VALUE_#POS_MAX_AUTO#>@TT_Package.GT_STATE_MAXAUTO</TT_VALUE_#POS_MAX_AUTO#> <SET_STATE_#POS_RTO#>0 (>K:SET_AUTOBRAKE_CONTROL)</SET_STATE_#POS_RTO#> <SET_STATE_#POS_OFF#>1 (>K:SET_AUTOBRAKE_CONTROL)</SET_STATE_#POS_OFF#> <SET_STATE_#POS_DISARM#>1 (>K:SET_AUTOBRAKE_CONTROL)</SET_STATE_#POS_DISARM#> <SET_STATE_#POS_1#>2 (>K:SET_AUTOBRAKE_CONTROL)</SET_STATE_#POS_1#> <SET_STATE_#POS_2#>3 (>K:SET_AUTOBRAKE_CONTROL)</SET_STATE_#POS_2#> <SET_STATE_#POS_3#>4 (>K:SET_AUTOBRAKE_CONTROL)</SET_STATE_#POS_3#> <SET_STATE_#POS_4#>5 (>K:SET_AUTOBRAKE_CONTROL)</SET_STATE_#POS_4#> <SET_STATE_#POS_MAX_AUTO#>6 (>K:SET_AUTOBRAKE_CONTROL)</SET_STATE_#POS_MAX_AUTO#> <GET_STATE_EXTERNAL>(A:AUTO BRAKE SWITCH CB, Number) sp0 (O:XMLVAR_Autobrake_Disarm) sp1</GET_STATE_EXTERNAL> <ENUM_VAL_TO_POS_EXTERNAL> l1 if{ #POS_DISARM# sp2 g2 } els{ l0 0 == if{ #POS_RTO# sp2 g2 } l0 1 == if{ #POS_OFF# sp2 g2 } l0 2 == if{ #POS_1# sp2 g2 } l0 3 == if{ #POS_2# sp2 g2 } l0 4 == if{ #POS_3# sp2 g2 } l0 5 == if{ #POS_4# sp2 g2 } l0 6 == if{ #POS_MAX_AUTO# sp2 g2 } } :2 l2 </ENUM_VAL_TO_POS_EXTERNAL> <ON_STATE_CHANGED_EXTERNAL_CODE>p0 #POS_DISARM# == (>O:XMLVAR_Autobrake_Disarm)</ON_STATE_CHANGED_EXTERNAL_CODE> </Case> </Switch> </Case> </Switch> </Parameters> <UseTemplate Name="ASOBO_HANDLING_Base_Template"> <Switch Param="TYPE"> <Case Value="ON_OFF"> <IE_NAME>Autobrake_Level_#ID#</IE_NAME> </Case> <Case Value="X_STATES"> <IE_NAME>Autobrake_#ID#</IE_NAME> </Case> </Switch> </UseTemplate> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID (using INTERACTION_TYPE, ID)
- ANIM_NAME (using INTERACTION_TYPE, ID)
- PART_ID (using INTERACTION_TYPE)
- TOOLTIP_TITLE
Condition: Switch(INTERACTION_TYPE)
-
Case: Push
Parameters set:
- TYPE
- WWISE_PREFIX
- AUTOBRAKE_LEVEL (using ID)
- AUTOBRAKE_RTO
- AUTOBRAKE_OFF
- IS_AIRLINER
- AUTODISABLE_COUNTDOWN
Condition: Switch(ID)
-
Case: 1
Parameters set:
- TT_DESCRIPTION_ID
-
Case: 2
Parameters set:
- TT_DESCRIPTION_ID
-
Case: 3
Parameters set:
- TT_DESCRIPTION_ID
Condition: Valid(DISABLED_IN_FLIGHT)
-
Case: True
Parameters set:
- TEST_DISABLED
-
Case: False
Parameters set:
- TEST_DISABLED
-
Case: Knob
Parameters set:
- TYPE
- WWISE_PREFIX
- TT_DESCRIPTION_ID
Condition: Switch(AIRLINER_TYPE)
-
Case: BOEING
Parameters set:
- POS_RTO
- POS_OFF
- POS_DISARM
- POS_1
- POS_2
- POS_3
- POS_4
- POS_MAX_AUTO
- NUM_STATES
-
Override
Condition: Switch(TYPE)
-
Case: ON_OFF
Parameters set:
- SET_SIMVAR_FROM_POSITION (using AUTOBRAKE_OFF, AUTOBRAKE_RTO)
-
-
Override
Condition: Switch(TYPE)
-
Case: ON_OFF
Parameters set:
- LOCAL_VAR_TO_WATCH_0
- SIMVAR_TO_WATCH_0
- SIMVAR_TO_WATCH_1
- SIMVAR_TO_WATCH_2
- SET_STATE_EXTERNAL (using TEST_DISABLED, ID, AUTOBRAKE_LEVEL, AUTOBRAKE_OFF, SET_SIMVAR_FROM_POSITION)
- GET_STATE_EXTERNAL (using AUTOBRAKE_LEVEL, AUTOBRAKE_OFF)
Condition: Check(ID)
-
Case: True
Parameters set:
- COMP_INIT_CODE (using SET_SIMVAR_FROM_POSITION)
- COMP_UPDATE_CODE (using AUTOBRAKE_OFF, AUTODISABLE_COUNTDOWN)
Condition: Valid(IS_AIRLINER)
-
Case: True
Parameters set:
- SEQ1_EMISSIVE_CODE (using ID)
- SEQ2_EMISSIVE_CODE (using ID)
-
Case: X_STATES
Parameters set:
- KNOB_TYPE
- SIMVAR_TO_WATCH_0
Condition: Switch(AIRLINER_TYPE)
-
Case: BOEING
Parameters set:
- STR_STATE_#POS_RTO#
- STR_STATE_#POS_OFF#
- STR_STATE_#POS_DISARM#
- STR_STATE_#POS_1#
- STR_STATE_#POS_2#
- STR_STATE_#POS_3#
- STR_STATE_#POS_4#
- STR_STATE_#POS_MAX_AUTO#
- TT_VALUE_#POS_RTO#
- TT_VALUE_#POS_OFF#
- TT_VALUE_#POS_DISARM#
- TT_VALUE_#POS_1#
- TT_VALUE_#POS_1#_IS_DYNAMIC
- TT_VALUE_#POS_2#
- TT_VALUE_#POS_2#_IS_DYNAMIC
- TT_VALUE_#POS_3#
- TT_VALUE_#POS_3#_IS_DYNAMIC
- TT_VALUE_#POS_4#
- TT_VALUE_#POS_4#_IS_DYNAMIC
- TT_VALUE_#POS_MAX_AUTO#
- SET_STATE_#POS_RTO#
- SET_STATE_#POS_OFF#
- SET_STATE_#POS_DISARM#
- SET_STATE_#POS_1#
- SET_STATE_#POS_2#
- SET_STATE_#POS_3#
- SET_STATE_#POS_4#
- SET_STATE_#POS_MAX_AUTO#
- GET_STATE_EXTERNAL
- ENUM_VAL_TO_POS_EXTERNAL (using POS_DISARM, POS_RTO, POS_OFF, POS_1, POS_2, POS_3, POS_4, POS_MAX_AUTO)
- ON_STATE_CHANGED_EXTERNAL_CODE (using POS_DISARM)
-
Templates used:
-
ASOBO_HANDLING_Base_Template
Condition: Switch(TYPE)
-
Case: ON_OFF
Parameters set:
- IE_NAME (using ID)
-
Case: X_STATES
Parameters set:
- IE_NAME (using ID)
-
-
Default
-
ASOBO_HANDLING_Wipers_Controller_SubTemplate
Definition from XML<Template Name="ASOBO_HANDLING_Wipers_Controller_SubTemplate"> <Parameters Type="Default"> <NODE_ID>HANDLING_#INTERACTION_TYPE#_Wipers</NODE_ID> <ANIM_NAME>HANDLING_#INTERACTION_TYPE#_Wipers</ANIM_NAME> <WWISE_EVENT>wipers_switch</WWISE_EVENT> <TEMPLATE_TO_USE>ASOBO_GT_Switch_XStates</TEMPLATE_TO_USE> <CIRCUIT_ID_WIPERS>1</CIRCUIT_ID_WIPERS> <Switch> <Case Valid="OFF_INT_LOW_HIGH"> <POWER_INT>30</POWER_INT> <POWER_LOW>75</POWER_LOW> <POWER_HIGH>100</POWER_HIGH> <POS_OFF>0</POS_OFF> <POS_INT>1</POS_INT> <POS_LOW>2</POS_LOW> <POS_HIGH>3</POS_HIGH> <NUM_STATES>4</NUM_STATES> </Case> <Case Valid="PARK_OFF_NORM_FAST"> <POWER_FAST>100</POWER_FAST> <POWER_NORM>50</POWER_NORM> <POS_PARK>0</POS_PARK> <POS_OFF>1</POS_OFF> <POS_NORM>2</POS_NORM> <POS_FAST>3</POS_FAST> <MOMENTARY_MIN_DURATION>0.1</MOMENTARY_MIN_DURATION> <CIRCUIT_ID_PARK>1</CIRCUIT_ID_PARK> <NUM_STATES>4</NUM_STATES> </Case> <Default> <POWER_NORM>100</POWER_NORM> <POWER_SLOW>75</POWER_SLOW> <POS_NORM>0</POS_NORM> <POS_OFF>1</POS_OFF> <POS_SLOW>2</POS_SLOW> <NUM_STATES>3</NUM_STATES> </Default> </Switch> <SWITCH_DIRECTION>Horizontal</SWITCH_DIRECTION> <IE_WIPERS_ID>Wipers</IE_WIPERS_ID> </Parameters> <Parameters Type="Override"> <Switch Param="INTERACTION_TYPE"> <Case Value="Knob"> <ANIM>EXTERNAL</ANIM> <ARROW_TYPE>Curved</ARROW_TYPE> <TT_ICON>Rotate</TT_ICON> </Case> </Switch> <INPUT_EVENT_ID_SOURCE>HANDLING</INPUT_EVENT_ID_SOURCE> <USE_INPUT_EVENT_ID>HANDLING</USE_INPUT_EVENT_ID> <BTN_ID>#IE_WIPERS_ID#</BTN_ID> </Parameters> <Parameters Type="Override"> <SET_POWER>#CIRCUIT_ID_WIPERS# (>K:2:ELECTRICAL_CIRCUIT_POWER_SETTING_SET)</SET_POWER> <GET_POWER>(A:CIRCUIT POWER SETTING:#CIRCUIT_ID_WIPERS#, Percent)</GET_POWER> <Switch> <Case Valid="PARK_OFF_NORM_FAST"> <PARK_ON>(A:CIRCUIT SWITCH ON:#CIRCUIT_ID_PARK#, Bool) ! if{ #CIRCUIT_ID_PARK# (>K:ELECTRICAL_CIRCUIT_TOGGLE) }</PARK_ON> <PARK_OFF>(A:CIRCUIT SWITCH ON:#CIRCUIT_ID_PARK#, Bool) if{ #CIRCUIT_ID_PARK# (>K:ELECTRICAL_CIRCUIT_TOGGLE) }</PARK_OFF> <IS_PARK_ON>(A:CIRCUIT SWITCH ON:#CIRCUIT_ID_PARK#, Bool)</IS_PARK_ON> <INIT_WIPERS_STATE> (A:CIRCUIT SWITCH ON:#CIRCUIT_ID_PARK#, Bool) if{ #CIRCUIT_ID_PARK# (>K:ELECTRICAL_CIRCUIT_TOGGLE) } (A:CIRCUIT SWITCH ON:#CIRCUIT_ID_WIPERS#, Bool) if{ #CIRCUIT_ID_WIPERS# (>K:ELECTRICAL_CIRCUIT_TOGGLE) } </INIT_WIPERS_STATE> <Condition> <Test> <GreaterOrEqual> <Value>POS_PARK</Value> <Number>1</Number> </GreaterOrEqual> </Test> <True> <STATE_MAX_TIMER>#MOMENTARY_MIN_DURATION#</STATE_MAX_TIMER> <STATE0_TIMER>0</STATE0_TIMER> <REST_STATE Process="Int">#POS_PARK# 1 -</REST_STATE> </True> <False> <STATE_MAX_TIMER>0</STATE_MAX_TIMER> <STATE0_TIMER>#MOMENTARY_MIN_DURATION#</STATE0_TIMER> <REST_STATE Process="Int">1</REST_STATE> </False> </Condition> </Case> <Default> <INIT_WIPERS_STATE>(A:CIRCUIT SWITCH ON:#CIRCUIT_ID_WIPERS#, Bool) if{ #CIRCUIT_ID_WIPERS# (>K:ELECTRICAL_CIRCUIT_TOGGLE) }</INIT_WIPERS_STATE> </Default> </Switch> <WIPERS_ON>(A:CIRCUIT SWITCH ON:#CIRCUIT_ID_WIPERS#, Bool) ! if{ #CIRCUIT_ID_WIPERS# (>K:ELECTRICAL_CIRCUIT_TOGGLE) }</WIPERS_ON> <WIPERS_OFF>(A:CIRCUIT SWITCH ON:#CIRCUIT_ID_WIPERS#, Bool) if{ #CIRCUIT_ID_WIPERS# (>K:ELECTRICAL_CIRCUIT_TOGGLE) }</WIPERS_OFF> <IS_WIPERS_ON>(A:CIRCUIT SWITCH ON:#CIRCUIT_ID_WIPERS#, Bool)</IS_WIPERS_ON> </Parameters> <Parameters Type="Override"> <Condition NotEmpty="CIRCUIT_ID_WIPERS"> <SIMVAR_TO_WATCH_0>CIRCUIT SWITCH ON:#CIRCUIT_ID_WIPERS#</SIMVAR_TO_WATCH_0> <SIMVAR_TO_WATCH_1>CIRCUIT POWER SETTING:#CIRCUIT_ID_WIPERS#</SIMVAR_TO_WATCH_1> </Condition> <Switch> <Case Valid="OFF_INT_LOW_HIGH"> <GET_STATE_EXTERNAL>#IS_WIPERS_ON# sp0 #GET_POWER# near sp1</GET_STATE_EXTERNAL> <ENUM_VAL_TO_POS_EXTERNAL> l0 if{ l1 #POWER_INT# == if{ #POS_INT# sp2 } els{ l1 #POWER_LOW# == if{ #POS_LOW# sp2 } els{ #POS_HIGH# sp2 } } g2 } els{ #POS_OFF# sp2 g2 } :2 l2 </ENUM_VAL_TO_POS_EXTERNAL> <SET_STATE_#POS_OFF#>#WIPERS_OFF#</SET_STATE_#POS_OFF#> <SET_STATE_#POS_INT#>#WIPERS_ON# #POWER_INT# #SET_POWER#</SET_STATE_#POS_INT#> <SET_STATE_#POS_LOW#>#WIPERS_ON# #POWER_LOW# #SET_POWER#</SET_STATE_#POS_LOW#> <SET_STATE_#POS_HIGH#>#WIPERS_ON# #POWER_HIGH# #SET_POWER#</SET_STATE_#POS_HIGH#> <STR_STATE_#POS_OFF#>Off</STR_STATE_#POS_OFF#> <STR_STATE_#POS_INT#>Int</STR_STATE_#POS_INT#> <STR_STATE_#POS_LOW#>Low</STR_STATE_#POS_LOW#> <STR_STATE_#POS_HIGH#>High</STR_STATE_#POS_HIGH#> <TT_VALUE_#POS_OFF#>@TT_Package.GT_STATE_OFF</TT_VALUE_#POS_OFF#> <TT_VALUE_#POS_INT#>@TT_Package.GT_STATE_INT</TT_VALUE_#POS_INT#> <TT_VALUE_#POS_LOW#>@TT_Package.GT_STATE_LOW</TT_VALUE_#POS_LOW#> <TT_VALUE_#POS_HIGH#>@TT_Package.GT_STATE_HIGH</TT_VALUE_#POS_HIGH#> <CODE_POS_#POS_OFF#>(>B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID#_Off)</CODE_POS_#POS_OFF#> <CODE_POS_#POS_INT#>(>B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID#_Int)</CODE_POS_#POS_INT#> <CODE_POS_#POS_LOW#>(>B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID#_Low)</CODE_POS_#POS_LOW#> <CODE_POS_#POS_HIGH#>(>B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID#_High)</CODE_POS_#POS_HIGH#> <STATE#POS_OFF#_TEST>(B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID#) #POS_OFF# ==</STATE#POS_OFF#_TEST> <STATE#POS_INT#_TEST>(B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID#) #POS_INT# ==</STATE#POS_INT#_TEST> <STATE#POS_LOW#_TEST>(B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID#) #POS_LOW# ==</STATE#POS_LOW#_TEST> <STATE#POS_HIGH#_TEST>(B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID#) #POS_HIGH# ==</STATE#POS_HIGH#_TEST> </Case> <Case Valid="PARK_OFF_NORM_FAST"> <SIMVAR_TO_WATCH_2>CIRCUIT SWITCH ON:#CIRCUIT_ID_PARK#</SIMVAR_TO_WATCH_2> <GET_STATE_EXTERNAL>#IS_WIPERS_ON# sp0 #IS_PARK_ON# sp1 #GET_POWER# near sp2</GET_STATE_EXTERNAL> <ENUM_VAL_TO_POS_EXTERNAL> l0 if{ l2 #POWER_FAST# == if{ #POS_FAST# sp3 } els{ #POS_NORM# sp3 } g2 } els{ l1 if{ #POS_PARK# sp3 } els{ #POS_OFF# sp3 } g2 } :2 l3 </ENUM_VAL_TO_POS_EXTERNAL> <CODE_POS_RETURN Process="Param">CODE_POS_#REST_STATE#</CODE_POS_RETURN> <SET_STATE_#POS_FAST#>#PARK_OFF# #WIPERS_ON# #POWER_FAST# #SET_POWER#</SET_STATE_#POS_FAST#> <SET_STATE_#POS_NORM#>#PARK_OFF# #WIPERS_ON# #POWER_NORM# #SET_POWER#</SET_STATE_#POS_NORM#> <SET_STATE_#POS_OFF#>#PARK_OFF# #WIPERS_OFF#</SET_STATE_#POS_OFF#> <SET_STATE_#POS_PARK#>#PARK_ON# #WIPERS_OFF#</SET_STATE_#POS_PARK#> <STR_STATE_#POS_FAST#>Fast</STR_STATE_#POS_FAST#> <STR_STATE_#POS_NORM#>Norm</STR_STATE_#POS_NORM#> <STR_STATE_#POS_OFF#>Off</STR_STATE_#POS_OFF#> <STR_STATE_#POS_PARK#>Park</STR_STATE_#POS_PARK#> <TT_VALUE_#POS_FAST#>@TT_Package.GT_STATE_FAST</TT_VALUE_#POS_FAST#> <TT_VALUE_#POS_NORM#>@TT_Package.GT_STATE_NORMAL</TT_VALUE_#POS_NORM#> <TT_VALUE_#POS_OFF#>@TT_Package.GT_STATE_OFF</TT_VALUE_#POS_OFF#> <TT_VALUE_#POS_PARK#>@TT_Package.GT_STATE_PARK</TT_VALUE_#POS_PARK#> <CODE_POS_#POS_FAST#>(>B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID#_Fast)</CODE_POS_#POS_FAST#> <CODE_POS_#POS_NORM#>(>B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID#_Norm)</CODE_POS_#POS_NORM#> <CODE_POS_#POS_OFF#>(>B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID#_Off)</CODE_POS_#POS_OFF#> <CODE_POS_#POS_PARK#>(>B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID#_Park)</CODE_POS_#POS_PARK#> <STATE#POS_FAST#_TEST>(B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID#) #POS_FAST# ==</STATE#POS_FAST#_TEST> <STATE#POS_NORM#_TEST>(B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID#) #POS_NORM# ==</STATE#POS_NORM#_TEST> <STATE#POS_OFF#_TEST>(B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID#) #POS_OFF# ==</STATE#POS_OFF#_TEST> <STATE#POS_PARK#_TEST>(B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID#) #POS_PARK# ==</STATE#POS_PARK#_TEST> <MOMENTARY_SWITCH/> </Case> <Default> <GET_STATE_EXTERNAL>#IS_WIPERS_ON# sp0 #GET_POWER# near sp1</GET_STATE_EXTERNAL> <ENUM_VAL_TO_POS_EXTERNAL>l0 if{ l1 #POWER_SLOW# == if{ #POS_SLOW# sp2 } els{ #POS_NORM# sp2 } g2 } els{ #POS_OFF# sp2 } :2 l2</ENUM_VAL_TO_POS_EXTERNAL> <SET_STATE_#POS_NORM#>#WIPERS_ON# #POWER_NORM# #SET_POWER#</SET_STATE_#POS_NORM#> <SET_STATE_#POS_OFF#>#WIPERS_OFF#</SET_STATE_#POS_OFF#> <SET_STATE_#POS_SLOW#>#WIPERS_ON# #POWER_SLOW# #SET_POWER#</SET_STATE_#POS_SLOW#> <STR_STATE_#POS_NORM#>Norm</STR_STATE_#POS_NORM#> <STR_STATE_#POS_OFF#>Off</STR_STATE_#POS_OFF#> <STR_STATE_#POS_SLOW#>Slow</STR_STATE_#POS_SLOW#> <TT_VALUE_#POS_NORM#>@TT_Package.GT_STATE_NORMAL</TT_VALUE_#POS_NORM#> <TT_VALUE_#POS_OFF#>@TT_Package.GT_STATE_OFF</TT_VALUE_#POS_OFF#> <TT_VALUE_#POS_SLOW#>@TT_Package.GT_STATE_SLOW</TT_VALUE_#POS_SLOW#> <CODE_POS_#POS_NORM#>(>B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID#_Norm)</CODE_POS_#POS_NORM#> <CODE_POS_#POS_OFF#>(>B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID#_Off)</CODE_POS_#POS_OFF#> <CODE_POS_#POS_SLOW#>(>B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID#_Slow)</CODE_POS_#POS_SLOW#> <STATE#POS_NORM#_TEST>(B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID#) #POS_NORM# ==</STATE#POS_NORM#_TEST> <STATE#POS_OFF#_TEST>(B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID#) #POS_OFF# ==</STATE#POS_OFF#_TEST> <STATE#POS_SLOW#_TEST>(B:#INPUT_EVENT_ID_SOURCE#_#BTN_ID#) #POS_SLOW# ==</STATE#POS_SLOW#_TEST> </Default> </Switch> <TOOLTIP_ENTRY_0>#INPUT_EVENT_ID_SOURCE#_#BTN_ID#</TOOLTIP_ENTRY_0> </Parameters> <Parameters Type="Default"> <TOOLTIP_TITLE>@TT_Package.SAFETY_KNOB_WIPERS_TITLE</TOOLTIP_TITLE> <TT_DESCRIPTION_ID>@TT_Package.SAFETY_KNOB_WIPERS_LEFT_ACTION</TT_DESCRIPTION_ID> </Parameters> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <UseTemplate Name="ASOBO_GT_Update"> <UPDATE_ONCE>True</UPDATE_ONCE> <UPDATE_CODE>#INIT_WIPERS_STATE#</UPDATE_CODE> </UseTemplate> <UseInputEvent ID="#USE_INPUT_EVENT_ID#"/> <UseTemplate Name="#TEMPLATE_TO_USE#"/> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID (using INTERACTION_TYPE)
- ANIM_NAME (using INTERACTION_TYPE)
- WWISE_EVENT
- TEMPLATE_TO_USE
- CIRCUIT_ID_WIPERS
- SWITCH_DIRECTION
- IE_WIPERS_ID
Condition: Switch
-
Case: Valid(OFF_INT_LOW_HIGH)
Parameters set:
- POWER_INT
- POWER_LOW
- POWER_HIGH
- POS_OFF
- POS_INT
- POS_LOW
- POS_HIGH
- NUM_STATES
-
Case: Valid(PARK_OFF_NORM_FAST)
Parameters set:
- POWER_FAST
- POWER_NORM
- POS_PARK
- POS_OFF
- POS_NORM
- POS_FAST
- MOMENTARY_MIN_DURATION
- CIRCUIT_ID_PARK
- NUM_STATES
-
Default case:
Parameters set:
- POWER_NORM
- POWER_SLOW
- POS_NORM
- POS_OFF
- POS_SLOW
- NUM_STATES
-
Override
Parameters set:
- INPUT_EVENT_ID_SOURCE
- USE_INPUT_EVENT_ID
- BTN_ID (using IE_WIPERS_ID)
Condition: Switch(INTERACTION_TYPE)
-
Case: Knob
Parameters set:
- ANIM
- ARROW_TYPE
- TT_ICON
-
Override
Parameters set:
- SET_POWER (using CIRCUIT_ID_WIPERS)
- GET_POWER (using CIRCUIT_ID_WIPERS)
- WIPERS_ON (using CIRCUIT_ID_WIPERS)
- WIPERS_OFF (using CIRCUIT_ID_WIPERS)
- IS_WIPERS_ON (using CIRCUIT_ID_WIPERS)
Condition: Switch
-
Case: Valid(PARK_OFF_NORM_FAST)
Parameters set:
- PARK_ON (using CIRCUIT_ID_PARK)
- PARK_OFF (using CIRCUIT_ID_PARK)
- IS_PARK_ON (using CIRCUIT_ID_PARK)
- INIT_WIPERS_STATE (using CIRCUIT_ID_PARK, CIRCUIT_ID_WIPERS)
Condition: Test(POS_PARK)
-
Case: True
Parameters set:
- STATE_MAX_TIMER (using MOMENTARY_MIN_DURATION)
- STATE0_TIMER
- REST_STATE (using POS_PARK)
-
Case: False
Parameters set:
- STATE_MAX_TIMER
- STATE0_TIMER (using MOMENTARY_MIN_DURATION)
- REST_STATE
-
Default case:
Parameters set:
- INIT_WIPERS_STATE (using CIRCUIT_ID_WIPERS)
-
Override
Parameters set:
- TOOLTIP_ENTRY_0 (using INPUT_EVENT_ID_SOURCE, BTN_ID)
Condition: NotEmpty(CIRCUIT_ID_WIPERS)
-
Case: True
Parameters set:
- SIMVAR_TO_WATCH_0 (using CIRCUIT_ID_WIPERS)
- SIMVAR_TO_WATCH_1 (using CIRCUIT_ID_WIPERS)
Condition: Switch
-
Case: Valid(OFF_INT_LOW_HIGH)
Parameters set:
- GET_STATE_EXTERNAL (using IS_WIPERS_ON, GET_POWER)
- ENUM_VAL_TO_POS_EXTERNAL (using POWER_INT, POS_INT, POWER_LOW, POS_LOW, POS_HIGH, POS_OFF)
- SET_STATE_#POS_OFF# (using WIPERS_OFF)
- SET_STATE_#POS_INT# (using WIPERS_ON, POWER_INT, SET_POWER)
- SET_STATE_#POS_LOW# (using WIPERS_ON, POWER_LOW, SET_POWER)
- SET_STATE_#POS_HIGH# (using WIPERS_ON, POWER_HIGH, SET_POWER)
- STR_STATE_#POS_OFF#
- STR_STATE_#POS_INT#
- STR_STATE_#POS_LOW#
- STR_STATE_#POS_HIGH#
- TT_VALUE_#POS_OFF#
- TT_VALUE_#POS_INT#
- TT_VALUE_#POS_LOW#
- TT_VALUE_#POS_HIGH#
- CODE_POS_#POS_OFF# (using INPUT_EVENT_ID_SOURCE, BTN_ID)
- CODE_POS_#POS_INT# (using INPUT_EVENT_ID_SOURCE, BTN_ID)
- CODE_POS_#POS_LOW# (using INPUT_EVENT_ID_SOURCE, BTN_ID)
- CODE_POS_#POS_HIGH# (using INPUT_EVENT_ID_SOURCE, BTN_ID)
- STATE#POS_OFF#_TEST (using INPUT_EVENT_ID_SOURCE, BTN_ID, POS_OFF)
- STATE#POS_INT#_TEST (using INPUT_EVENT_ID_SOURCE, BTN_ID, POS_INT)
- STATE#POS_LOW#_TEST (using INPUT_EVENT_ID_SOURCE, BTN_ID, POS_LOW)
- STATE#POS_HIGH#_TEST (using INPUT_EVENT_ID_SOURCE, BTN_ID, POS_HIGH)
-
Case: Valid(PARK_OFF_NORM_FAST)
Parameters set:
- SIMVAR_TO_WATCH_2 (using CIRCUIT_ID_PARK)
- GET_STATE_EXTERNAL (using IS_WIPERS_ON, IS_PARK_ON, GET_POWER)
- ENUM_VAL_TO_POS_EXTERNAL (using POWER_FAST, POS_FAST, POS_NORM, POS_PARK, POS_OFF)
- CODE_POS_RETURN (using REST_STATE)
- SET_STATE_#POS_FAST# (using PARK_OFF, WIPERS_ON, POWER_FAST, SET_POWER)
- SET_STATE_#POS_NORM# (using PARK_OFF, WIPERS_ON, POWER_NORM, SET_POWER)
- SET_STATE_#POS_OFF# (using PARK_OFF, WIPERS_OFF)
- SET_STATE_#POS_PARK# (using PARK_ON, WIPERS_OFF)
- STR_STATE_#POS_FAST#
- STR_STATE_#POS_NORM#
- STR_STATE_#POS_OFF#
- STR_STATE_#POS_PARK#
- TT_VALUE_#POS_FAST#
- TT_VALUE_#POS_NORM#
- TT_VALUE_#POS_OFF#
- TT_VALUE_#POS_PARK#
- CODE_POS_#POS_FAST# (using INPUT_EVENT_ID_SOURCE, BTN_ID)
- CODE_POS_#POS_NORM# (using INPUT_EVENT_ID_SOURCE, BTN_ID)
- CODE_POS_#POS_OFF# (using INPUT_EVENT_ID_SOURCE, BTN_ID)
- CODE_POS_#POS_PARK# (using INPUT_EVENT_ID_SOURCE, BTN_ID)
- STATE#POS_FAST#_TEST (using INPUT_EVENT_ID_SOURCE, BTN_ID, POS_FAST)
- STATE#POS_NORM#_TEST (using INPUT_EVENT_ID_SOURCE, BTN_ID, POS_NORM)
- STATE#POS_OFF#_TEST (using INPUT_EVENT_ID_SOURCE, BTN_ID, POS_OFF)
- STATE#POS_PARK#_TEST (using INPUT_EVENT_ID_SOURCE, BTN_ID, POS_PARK)
- MOMENTARY_SWITCH
-
Default case:
Parameters set:
- GET_STATE_EXTERNAL (using IS_WIPERS_ON, GET_POWER)
- ENUM_VAL_TO_POS_EXTERNAL (using POWER_SLOW, POS_SLOW, POS_NORM, POS_OFF)
- SET_STATE_#POS_NORM# (using WIPERS_ON, POWER_NORM, SET_POWER)
- SET_STATE_#POS_OFF# (using WIPERS_OFF)
- SET_STATE_#POS_SLOW# (using WIPERS_ON, POWER_SLOW, SET_POWER)
- STR_STATE_#POS_NORM#
- STR_STATE_#POS_OFF#
- STR_STATE_#POS_SLOW#
- TT_VALUE_#POS_NORM#
- TT_VALUE_#POS_OFF#
- TT_VALUE_#POS_SLOW#
- CODE_POS_#POS_NORM# (using INPUT_EVENT_ID_SOURCE, BTN_ID)
- CODE_POS_#POS_OFF# (using INPUT_EVENT_ID_SOURCE, BTN_ID)
- CODE_POS_#POS_SLOW# (using INPUT_EVENT_ID_SOURCE, BTN_ID)
- STATE#POS_NORM#_TEST (using INPUT_EVENT_ID_SOURCE, BTN_ID, POS_NORM)
- STATE#POS_OFF#_TEST (using INPUT_EVENT_ID_SOURCE, BTN_ID, POS_OFF)
- STATE#POS_SLOW#_TEST (using INPUT_EVENT_ID_SOURCE, BTN_ID, POS_SLOW)
-
Default
Parameters set:
- TOOLTIP_TITLE
- TT_DESCRIPTION_ID
Parameters read:
- NODE_ID
Components:
-
#NODE_ID# (Node: #NODE_ID#)
Parameters read:
- USE_INPUT_EVENT_ID
- TEMPLATE_TO_USE
Templates used:
-
ASOBO_GT_Update
Parameters set:
- UPDATE_ONCE
- UPDATE_CODE (using INIT_WIPERS_STATE)
-
#TEMPLATE_TO_USE#
- May resolve to the following template(s):
-
Default
-
ASOBO_HANDLING_Switch_AerobaticsTrimFlaps_SubTemplate
Definition from XML<Template Name="ASOBO_HANDLING_Switch_AerobaticsTrimFlaps_SubTemplate"> <Parameters Type="Default"> <ANIM_NAME>HANDLING_Switch_AerobaticsTrimFlaps</ANIM_NAME> <NODE_ID>HANDLING_Switch_AerobaticsTrimFlaps</NODE_ID> <PART_ID>HANDLING_Switch_AerobaticsTrimFlaps</PART_ID> <BUS_ID>-1</BUS_ID> <CIRCUIT_ID>1</CIRCUIT_ID> <WWISE_EVENT_1>aerobaticstrimflaps_switch_on</WWISE_EVENT_1> <WWISE_EVENT_2>aerobaticstrimflaps_switch_off</WWISE_EVENT_2> <IE_CIRCUIT_ID>Aerobatic_Trim_Flaps</IE_CIRCUIT_ID> <TT_DESCRIPTION_ID>@TT_Package.HANDLING_SWITCH_AEROBATICSTRIMFLAPS_ACTION</TT_DESCRIPTION_ID> <TOOLTIP_TITLE>@TT_Package.HANDLING_SWITCH_AEROBATICSTRIMFLAPS_TITLE</TOOLTIP_TITLE> </Parameters> <Parameters Type="Override"> <DISABLE_TRIM> 1 (>K:RUDDER_TRIM_DISABLED_SET) 1 (>K:AILERON_TRIM_DISABLED_SET) 1 (>K:ELEVATOR_TRIM_DISABLED_SET) </DISABLE_TRIM> <ENABLE_TRIM> 0 (>K:RUDDER_TRIM_DISABLED_SET) 0 (>K:AILERON_TRIM_DISABLED_SET) 0 (>K:ELEVATOR_TRIM_DISABLED_SET) </ENABLE_TRIM> </Parameters> <Parameters Type="Override"> <BTN_ID>#IE_CIRCUIT_ID#</BTN_ID> <IS_CONNECTION_ON>#BUS_ID# (A:1:CIRCUIT CONNECTION ON:#CIRCUIT_ID#, Bool)</IS_CONNECTION_ON> </Parameters> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <UseInputEvent ID="HANDLING"> <SET_STATE_EXTERNAL> #IS_CONNECTION_ON# ! p0 != if{ #CIRCUIT_ID# #BUS_ID# (>K:2:ELECTRICAL_BUS_TO_CIRCUIT_CONNECTION_TOGGLE) } #IS_CONNECTION_ON# if{ #ENABLE_TRIM# } els{ #DISABLE_TRIM# } </SET_STATE_EXTERNAL> <GET_STATE_EXTERNAL>#IS_CONNECTION_ON# ! sp0</GET_STATE_EXTERNAL> <SIM_STATE_IS_ON_EXTERNAL>l0</SIM_STATE_IS_ON_EXTERNAL> <ANIM>EXTERNAL</ANIM> </UseInputEvent> <UseTemplate Name="ASOBO_GT_Switch_Code"> <TOOLTIP_ENTRY_0>HANDLING_#BTN_ID#</TOOLTIP_ENTRY_0> <ANIM_CODE>(B:HANDLING_#BTN_ID#, Bool) 100 *</ANIM_CODE> <LEFT_SINGLE_CODE>(>B:HANDLING_#BTN_ID#_Toggle)</LEFT_SINGLE_CODE> </UseTemplate> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- ANIM_NAME
- NODE_ID
- PART_ID
- BUS_ID
- CIRCUIT_ID
- WWISE_EVENT_1
- WWISE_EVENT_2
- IE_CIRCUIT_ID
- TT_DESCRIPTION_ID
- TOOLTIP_TITLE
-
Override
Parameters set:
- DISABLE_TRIM
- ENABLE_TRIM
-
Override
Parameters set:
- BTN_ID (using IE_CIRCUIT_ID)
- IS_CONNECTION_ON (using BUS_ID, CIRCUIT_ID)
Parameters read:
- NODE_ID
Components:
-
#NODE_ID# (Node: #NODE_ID#)
Parameters set:
- SET_STATE_EXTERNAL (using IS_CONNECTION_ON, CIRCUIT_ID, BUS_ID, ENABLE_TRIM, DISABLE_TRIM)
- GET_STATE_EXTERNAL (using IS_CONNECTION_ON)
- SIM_STATE_IS_ON_EXTERNAL
- ANIM
Templates used:
-
ASOBO_GT_Switch_Code
Parameters set:
- TOOLTIP_ENTRY_0 (using BTN_ID)
- ANIM_CODE (using BTN_ID)
- LEFT_SINGLE_CODE (using BTN_ID)
-
Default
-
ASOBO_HANDLING_InertSep_SubTemplate
Definition from XML<Template Name="ASOBO_HANDLING_InertSep_SubTemplate"> <Parameters Type="Default"> <NODE_ID>HANDLING_#INTERACTION_TYPE#_InertSep</NODE_ID> <ANIM_NAME>HANDLING_#INTERACTION_TYPE#_InertSep</ANIM_NAME> <Switch Param="INTERACTION_TYPE"> <Case Value="Lever"> <WWISE_EVENT_1>Inertsep_lever_on</WWISE_EVENT_1> <NORMALIZED_TIME_1>0.1</NORMALIZED_TIME_1> <DIRECTION_1>Forward</DIRECTION_1> <WWISE_EVENT_2>Inertsep_lever_off</WWISE_EVENT_2> <NORMALIZED_TIME_2>0.9</NORMALIZED_TIME_2> <DIRECTION_2>Backward</DIRECTION_2> <ANIM>EXTERNAL</ANIM> </Case> </Switch> <VAR_NAME>XMLVAR_InterSep</VAR_NAME> <VAR_SCOPE>L</VAR_SCOPE> <TOOLTIP_TITLE>@TT_Package.DEICE_SWITCH_INERTSEP_TITLE</TOOLTIP_TITLE> <TT_DESCRIPTION_ID>@TT_Package.DEICE_SWITCH_INERTSEP_ACTION</TT_DESCRIPTION_ID> </Parameters> <Parameters Type="Override"> <BTN_ID>InertSep</BTN_ID> </Parameters> <Component ID="#NODE_ID#" Node="#NODE_ID#"> <UseInputEvent ID="HANDLING"> <SET_STATE_ON>1 (>#VAR_SCOPE#:#VAR_NAME#)</SET_STATE_ON> <SET_STATE_OFF>0 (>#VAR_SCOPE#:#VAR_NAME#)</SET_STATE_OFF> <GET_STATE_EXTERNAL>(#VAR_SCOPE#:#VAR_NAME#) sp0</GET_STATE_EXTERNAL> <SIM_STATE_IS_ON_EXTERNAL>l0</SIM_STATE_IS_ON_EXTERNAL> <STR_STATE_OFF>Normal</STR_STATE_OFF> <STR_STATE_ON>Bypass</STR_STATE_ON> <TT_VALUE_OFF>(R:1:@TT_Package.GT_STATE_NORMAL)</TT_VALUE_OFF> <TT_VALUE_ON>(R:1:@TT_Package.GT_STATE_BYPASS)</TT_VALUE_ON> </UseInputEvent> <UseTemplate Name="ASOBO_GT_Switch_Code"> <TOOLTIP_ENTRY_0>HANDLING_#BTN_ID#</TOOLTIP_ENTRY_0> <LEFT_SINGLE_CODE>(>B:HANDLING_#BTN_ID#_Toggle)</LEFT_SINGLE_CODE> <ANIM_CODE>(B:HANDLING_#BTN_ID#, Bool) 100 *</ANIM_CODE> </UseTemplate> </Component> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID (using INTERACTION_TYPE)
- ANIM_NAME (using INTERACTION_TYPE)
- VAR_NAME
- VAR_SCOPE
- TOOLTIP_TITLE
- TT_DESCRIPTION_ID
Condition: Switch(INTERACTION_TYPE)
-
Case: Lever
Parameters set:
- WWISE_EVENT_1
- NORMALIZED_TIME_1
- DIRECTION_1
- WWISE_EVENT_2
- NORMALIZED_TIME_2
- DIRECTION_2
- ANIM
-
Override
Parameters set:
- BTN_ID
Parameters read:
- NODE_ID
Components:
-
#NODE_ID# (Node: #NODE_ID#)
Parameters set:
- SET_STATE_ON (using VAR_SCOPE, VAR_NAME)
- SET_STATE_OFF (using VAR_SCOPE, VAR_NAME)
- GET_STATE_EXTERNAL (using VAR_SCOPE, VAR_NAME)
- SIM_STATE_IS_ON_EXTERNAL
- STR_STATE_OFF
- STR_STATE_ON
- TT_VALUE_OFF
- TT_VALUE_ON
Templates used:
-
ASOBO_GT_Switch_Code
Parameters set:
- TOOLTIP_ENTRY_0 (using BTN_ID)
- LEFT_SINGLE_CODE (using BTN_ID)
- ANIM_CODE (using BTN_ID)
-
Default
-
ASOBO_HANDLING_AutoSpoiler_SubTemplate
Definition from XML<Template Name="ASOBO_HANDLING_AutoSpoiler_SubTemplate"> <Parameters Type="Default"> <ANIM_NAME>HANDLING_#INTERACTION_TYPE#_AutoSpoiler</ANIM_NAME> <NODE_ID>HANDLING_#INTERACTION_TYPE#_AutoSpoiler</NODE_ID> <PART_ID>HANDLING_#INTERACTION_TYPE#_AutoSpoiler</PART_ID> <Switch Param="INTERACTION_TYPE"> <Case Value="Push"> <WWISE_EVENT_1>autospoiler_push_button_on</WWISE_EVENT_1> <NORMALIZED_TIME_1>0.1</NORMALIZED_TIME_1> <WWISE_EVENT_2>autospoiler_push_button_off</WWISE_EVENT_2> <NORMALIZED_TIME_2>0.5</NORMALIZED_TIME_2> <PUSH_TYPE>NORM_DISARM</PUSH_TYPE> </Case> </Switch> <TT_DESCRIPTION_ID>@TT_Package.HANDLING_PUSH_AUTOGROUNDSPOILERS_ACTION</TT_DESCRIPTION_ID> <TOOLTIP_TITLE>@TT_Package.HANDLING_PUSH_AUTOGROUNDSPOILERS_TITLE</TOOLTIP_TITLE> </Parameters> <Parameters Type="Override"> <BTN_ID>AutoSpoiler</BTN_ID> </Parameters> <Switch Param="INTERACTION_TYPE"> <Case Value="Push"> <UseTemplate Name="ASOBO_GT_Push_Button_Airliner"> <Switch Param="PUSH_TYPE"> <Case Value="NORM_DISARM"> <STR_STATE_ON>Norm</STR_STATE_ON> <STR_STATE_OFF>Disarm</STR_STATE_OFF> <TT_VALUE_ON>(R:1:@TT_Package.GT_STATE_NORMAL)</TT_VALUE_ON> <TT_VALUE_OFF>(R:1:@TT_Package.GT_STATE_DISARM)</TT_VALUE_OFF> </Case> </Switch> <INPUT_EVENT_ID>ENGINE</INPUT_EVENT_ID> <TOOLTIP_ENTRY_0>ENGINE_#BTN_ID#</TOOLTIP_ENTRY_0> <SEQ1_EMISSIVE_CODE>(B:ENGINE_#BTN_ID#, Bool)</SEQ1_EMISSIVE_CODE> <SEQ2_EMISSIVE_CODE>(B:ENGINE_#BTN_ID#, Bool) !</SEQ2_EMISSIVE_CODE> <LEFT_SINGLE_CODE>(>B:ENGINE_#BTN_ID#_Toggle)</LEFT_SINGLE_CODE> <SIMVAR_TO_WATCH_0>SPOILERS ARMED</SIMVAR_TO_WATCH_0> <SET_STATE_EXTERNAL>(A:SPOILERS ARMED, Bool) p0 != if{ (>K:SPOILERS_ARM_TOGGLE) }</SET_STATE_EXTERNAL> <GET_STATE_EXTERNAL>(A:SPOILERS ARMED, Bool) sp0</GET_STATE_EXTERNAL> <SIM_STATE_IS_ON_EXTERNAL>l0</SIM_STATE_IS_ON_EXTERNAL> </UseTemplate> </Case> </Switch> </Template>Parameters initialization:
-
Default
Parameters set:
- ANIM_NAME (using INTERACTION_TYPE)
- NODE_ID (using INTERACTION_TYPE)
- PART_ID (using INTERACTION_TYPE)
- TT_DESCRIPTION_ID
- TOOLTIP_TITLE
Condition: Switch(INTERACTION_TYPE)
-
Case: Push
Parameters set:
- WWISE_EVENT_1
- NORMALIZED_TIME_1
- WWISE_EVENT_2
- NORMALIZED_TIME_2
- PUSH_TYPE
-
Override
Parameters set:
- BTN_ID
Condition: Switch(INTERACTION_TYPE)
-
Case: Push
Templates used:
-
ASOBO_GT_Push_Button_Airliner
Parameters set:
- INPUT_EVENT_ID
- TOOLTIP_ENTRY_0 (using BTN_ID)
- SEQ1_EMISSIVE_CODE (using BTN_ID)
- SEQ2_EMISSIVE_CODE (using BTN_ID)
- LEFT_SINGLE_CODE (using BTN_ID)
- SIMVAR_TO_WATCH_0
- SET_STATE_EXTERNAL
- GET_STATE_EXTERNAL
- SIM_STATE_IS_ON_EXTERNAL
Condition: Switch(PUSH_TYPE)
-
Case: NORM_DISARM
Parameters set:
- STR_STATE_ON
- STR_STATE_OFF
- TT_VALUE_ON
- TT_VALUE_OFF
-
ASOBO_GT_Push_Button_Airliner
-
Default
-
ASOBO_HANDLING_Water_Rudder_Controller_SubTemplate
Definition from XML<Template Name="ASOBO_HANDLING_Water_Rudder_Controller_SubTemplate"> <Parameters Type="Default"> <NODE_ID>HANDLING_#INTERACTION_TYPE#_Water_Rudder</NODE_ID> <ANIM_NAME>HANDLING_#INTERACTION_TYPE#_Water_Rudder</ANIM_NAME> <PART_ID>HANDLING_#INTERACTION_TYPE#_Water_Rudder</PART_ID> <WWISE_PREFIX>water_rudder</WWISE_PREFIX> <Switch Param="INTERACTION_TYPE"> <Case Value="Switch"> <TOOLTIP_TITLE>@TT_Package.HYDRA_SWITCH_WATERRUDDER_TITLE</TOOLTIP_TITLE> <TT_DESCRIPTION_ID>@TT_Package.HYDRA_SWITCH_WATERRUDDER_ACTION_SET</TT_DESCRIPTION_ID> </Case> <Case Value="Lever"> <TOOLTIP_TITLE>@TT_Package.LANDING_GEAR_WATER_RUDDER_TITLE</TOOLTIP_TITLE> <TT_DESCRIPTION_ID>@TT_Package.LANDING_GEAR_WATER_RUDDER_ACTION</TT_DESCRIPTION_ID> </Case> </Switch> <Condition Valid="USE_STATE_INDICATOR"> <EMISSIVE_NODE_ID>HANDLING_Indicator_WaterRudder</EMISSIVE_NODE_ID> </Condition> </Parameters> <Condition Valid="USE_STATE_INDICATOR"> <Component ID="#EMISSIVE_NODE_ID#" Node="#EMISSIVE_NODE_ID#"> <UseTemplate Name="ASOBO_GT_Emissive_Gauge"> <EMISSIVE_CODE>(B:HANDLING_Water_Rudder, Bool)</EMISSIVE_CODE> </UseTemplate> </Component> </Condition> <UseTemplate Name="ASOBO_HANDLING_Base_Template"> <IE_NAME>Water_Rudder</IE_NAME> <SET_STATE_EXTERNAL>p0 (A:WATER RUDDER HANDLE POSITION, percent over 100) 0 > != if{ (>K:TOGGLE_WATER_RUDDER) }</SET_STATE_EXTERNAL> <GET_STATE_EXTERNAL>(A:WATER RUDDER HANDLE POSITION, percent over 100) 0 > sp0</GET_STATE_EXTERNAL> <SIM_STATE_IS_ON_EXTERNAL>l0</SIM_STATE_IS_ON_EXTERNAL> <STR_STATE_ON>Down</STR_STATE_ON> <STR_STATE_OFF>Up</STR_STATE_OFF> <TT_VALUE_ON>(R:1:@TT_Package.GT_STATE_DOWN)</TT_VALUE_ON> <TT_VALUE_OFF>(R:1:@TT_Package.GT_STATE_UP)</TT_VALUE_OFF> <SIMVAR_TO_WATCH_0>WATER RUDDER HANDLE POSITION</SIMVAR_TO_WATCH_0> <Switch Param="INTERACTION_TYPE"> <Case Value="Lever"> <LEVER_TYPE>2_STATES</LEVER_TYPE> </Case> </Switch> </UseTemplate> </Template>Parameters initialization:
-
Default
Parameters set:
- NODE_ID (using INTERACTION_TYPE)
- ANIM_NAME (using INTERACTION_TYPE)
- PART_ID (using INTERACTION_TYPE)
- WWISE_PREFIX
Condition: Switch(INTERACTION_TYPE)
-
Case: Switch
Parameters set:
- TOOLTIP_TITLE
- TT_DESCRIPTION_ID
-
Case: Lever
Parameters set:
- TOOLTIP_TITLE
- TT_DESCRIPTION_ID
Condition: Valid(USE_STATE_INDICATOR)
-
Case: True
Parameters set:
- EMISSIVE_NODE_ID
Templates used:
-
ASOBO_HANDLING_Base_Template
Parameters set:
- IE_NAME
- SET_STATE_EXTERNAL
- GET_STATE_EXTERNAL
- SIM_STATE_IS_ON_EXTERNAL
- STR_STATE_ON
- STR_STATE_OFF
- TT_VALUE_ON
- TT_VALUE_OFF
- SIMVAR_TO_WATCH_0
Condition: Switch(INTERACTION_TYPE)
-
Case: Lever
Parameters set:
- LEVER_TYPE
Condition: Valid(USE_STATE_INDICATOR)
-
Case: True
Parameters read:
- EMISSIVE_NODE_ID
Components:
-
#EMISSIVE_NODE_ID# (Node: #EMISSIVE_NODE_ID#)
Templates used:
-
ASOBO_GT_Emissive_Gauge
Parameters set:
- EMISSIVE_CODE
-
ASOBO_GT_Emissive_Gauge
-
Default